pandora-kernel.git
9 years agosky2: Threshold for Pause Packet is set wrong
Mirko Lindner [Tue, 26 Mar 2013 06:38:42 +0000 (06:38 +0000)]
sky2: Threshold for Pause Packet is set wrong

[ Upstream commit 74f9f42c1c1650e74fb464f76644c9041f996851 ]

The sky2 driver sets the Rx Upper Threshold for Pause Packet generation to a
wrong value which leads to only 2kB of RAM remaining space. This can lead to
Rx overflow errors even with activated flow-control.

Fix: We should increase the value to 8192/8

Signed-off-by: Mirko Lindner <mlindner@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agosky2: Receive Overflows not counted
Mirko Lindner [Tue, 26 Mar 2013 06:38:35 +0000 (06:38 +0000)]
sky2: Receive Overflows not counted

[ Upstream commit 9cfe8b156c21cf340b3a10ecb3022fbbc1c39185 ]

The sky2 driver doesn't count the Receive Overflows because the MAC
interrupt for this event is not set in the MAC's interrupt mask.
The MAC's interrupt mask is set only for Transmit FIFO Underruns.

Fix: The correct setting should be (GM_IS_TX_FF_UR | GM_IS_RX_FF_OR)
Otherwise the Receive Overflow event will not generate any interrupt.
The  Receive Overflow interrupt is handled correctly

Signed-off-by: Mirko Lindner <mlindner@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoloop: prevent bdev freeing while device in use
Anatol Pomozov [Mon, 1 Apr 2013 16:47:56 +0000 (09:47 -0700)]
loop: prevent bdev freeing while device in use

commit c1681bf8a7b1b98edee8b862a42c19c4e53205fd upstream.

struct block_device lifecycle is defined by its inode (see fs/block_dev.c) -
block_device allocated first time we access /dev/loopXX and deallocated on
bdev_destroy_inode. When we create the device "losetup /dev/loopXX afile"
we want that block_device stay alive until we destroy the loop device
with "losetup -d".

But because we do not hold /dev/loopXX inode its counter goes 0, and
inode/bdev can be destroyed at any moment. Usually it happens at memory
pressure or when user drops inode cache (like in the test below). When later in
loop_clr_fd() we want to use bdev we have use-after-free error with following
stack:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000280
  bd_set_size+0x10/0xa0
  loop_clr_fd+0x1f8/0x420 [loop]
  lo_ioctl+0x200/0x7e0 [loop]
  lo_compat_ioctl+0x47/0xe0 [loop]
  compat_blkdev_ioctl+0x341/0x1290
  do_filp_open+0x42/0xa0
  compat_sys_ioctl+0xc1/0xf20
  do_sys_open+0x16e/0x1d0
  sysenter_dispatch+0x7/0x1a

To prevent use-after-free we need to grab the device in loop_set_fd()
and put it later in loop_clr_fd().

The issue is reprodusible on current Linus head and v3.3. Here is the test:

  dd if=/dev/zero of=loop.file bs=1M count=1
  while [ true ]; do
    losetup /dev/loop0 loop.file
    echo 2 > /proc/sys/vm/drop_caches
    losetup -d /dev/loop0
  done

[ Doing bdgrab/bput in loop_set_fd/loop_clr_fd is safe, because every
  time we call loop_set_fd() we check that loop_device->lo_state is
  Lo_unbound and set it to Lo_bound If somebody will try to set_fd again
  it will get EBUSY.  And if we try to loop_clr_fd() on unbound loop
  device we'll get ENXIO.

  loop_set_fd/loop_clr_fd (and any other loop ioctl) is called under
  loop_device->lo_ctl_mutex. ]

Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoNFS: nfs_getaclargs.acl_len is a size_t
Chuck Lever [Wed, 11 Jul 2012 20:30:32 +0000 (16:30 -0400)]
NFS: nfs_getaclargs.acl_len is a size_t

commit 56d08fef2369d5ca9ad2e1fc697f5379fd8af751 upstream.

Squelch compiler warnings:

fs/nfs/nfs4proc.c: In function ‘__nfs4_get_acl_uncached’:
fs/nfs/nfs4proc.c:3811:14: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
fs/nfs/nfs4proc.c:3818:15: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]

Introduced by commit bf118a34 "NFSv4: include bitmap in nfsv4 get
acl data", Dec 7, 2011.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoudf: Fix bitmap overflow on large filesystems with small block size
Jan Kara [Tue, 5 Feb 2013 12:59:56 +0000 (13:59 +0100)]
udf: Fix bitmap overflow on large filesystems with small block size

commit 89b1f39eb4189de745fae554b0d614d87c8d5c63 upstream.

For large UDF filesystems with 512-byte blocks the number of necessary
bitmap blocks is larger than 2^16 so s_nr_groups in udf_bitmap overflows
(the number will overflow for filesystems larger than 128 GB with
512-byte blocks). That results in ENOSPC errors despite the filesystem
has plenty of free space.

Fix the problem by changing s_nr_groups' type to 'int'. That is enough
even for filesystems 2^32 blocks (UDF maximum) and 512-byte blocksize.

Reported-and-tested-by: v10lator@myway.de
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agokey: Fix resource leak
Alan Cox [Fri, 28 Sep 2012 11:20:02 +0000 (12:20 +0100)]
key: Fix resource leak

commit a84a921978b7d56e0e4b87ffaca6367429b4d8ff upstream.

On an error iov may still have been reallocated and need freeing

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agort2x00: error in configurations with mesh support disabled
Felix Fietkau [Tue, 26 Feb 2013 15:09:55 +0000 (16:09 +0100)]
rt2x00: error in configurations with  mesh support disabled

commit 6ef9e2f6d12ce9e2120916804d2ddd46b954a70b upstream.

If CONFIG_MAC80211_MESH is not set, cfg80211 will now allow advertising
interface combinations with NL80211_IFTYPE_MESH_POINT present.
Add appropriate ifdefs to avoid running into errors.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[lxiang: Backported for 3.4-stable. Removed code of simultaneous AP and mesh
 mode added in 4a5fc6d 3.9-rc1.]
Signed-off-by: Lingzhu Xiang <lxiang@redhat.com>
Reviewed-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoixgbe: fix registration order of driver and DCA nofitication
Jakub Kicinski [Wed, 3 Apr 2013 16:50:54 +0000 (16:50 +0000)]
ixgbe: fix registration order of driver and DCA nofitication

commit f01fc1a82c2ee68726b400fadb156bd623b5f2f1 upstream.

ixgbe_notify_dca cannot be called before driver registration
because it expects driver's klist_devices to be allocated and
initialized. While on it make sure debugfs files are removed
when registration fails.

Signed-off-by: Jakub Kicinski <jakub.kicinski@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: no debugfs support]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agomm: prevent mmap_cache race in find_vma()
Jan Stancek [Thu, 4 Apr 2013 18:35:10 +0000 (11:35 -0700)]
mm: prevent mmap_cache race in find_vma()

commit b6a9b7f6b1f21735a7456d534dc0e68e61359d2c upstream.

find_vma() can be called by multiple threads with read lock
held on mm->mmap_sem and any of them can update mm->mmap_cache.
Prevent compiler from re-fetching mm->mmap_cache, because other
readers could update it in the meantime:

               thread 1                             thread 2
                                        |
  find_vma()                            |  find_vma()
    struct vm_area_struct *vma = NULL;  |
    vma = mm->mmap_cache;               |
    if (!(vma && vma->vm_end > addr     |
        && vma->vm_start <= addr)) {    |
                                        |    mm->mmap_cache = vma;
    return vma;                         |
     ^^ compiler may optimize this      |
        local variable out and re-read  |
        mm->mmap_cache                  |

This issue can be reproduced with gcc-4.8.0-1 on s390x by running
mallocstress testcase from LTP, which triggers:

  kernel BUG at mm/rmap.c:1088!
    Call Trace:
     ([<000003d100c57000>] 0x3d100c57000)
      [<000000000023a1c0>] do_wp_page+0x2fc/0xa88
      [<000000000023baae>] handle_pte_fault+0x41a/0xac8
      [<000000000023d832>] handle_mm_fault+0x17a/0x268
      [<000000000060507a>] do_protection_exception+0x1e2/0x394
      [<0000000000603a04>] pgm_check_handler+0x138/0x13c
      [<000003fffcf1f07a>] 0x3fffcf1f07a
    Last Breaking-Event-Address:
      [<000000000024755e>] page_add_new_anon_rmap+0xc2/0x168

Thanks to Jakub Jelinek for his insight on gcc and helping to
track this down.

Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoEISA/PCI: Init EISA early, before PNP
Yinghai Lu [Thu, 28 Mar 2013 04:28:05 +0000 (21:28 -0700)]
EISA/PCI: Init EISA early, before PNP

commit c5fb301ae83bec6892e54984e6ec765c47df8e10 upstream.

Matthew reported kernels fail the pci_eisa probe and are later successful
with the virtual_eisa_root_init force probe without slot0.

The reason for that is: PNP probing is before pci_eisa_init gets called
as pci_eisa_init is called via pci_driver.

pnp 00:0f has 0xc80 - 0xc84 reserved.
[    9.700409] pnp 00:0f: [io  0x0c80-0x0c84]

so eisa_probe will fail from pci_eisa_init
==>eisa_root_register
==>eisa_probe path.
as force_probe is not set in pci_eisa_root, it will bail early when
slot0 is not probed and initialized.

Try to use subsys_initcall_sync instead, and will keep following sequence:
pci_subsys_init
pci_eisa_init_early
pnpacpi_init/isapnp_init

After this patch EISA can be initialized properly, and PNP overlapping
resource will not be reserved.
[   10.104434] system 00:0f: [io  0x0c80-0x0c84] could not be reserved

Reported-by: Matthew Whitehead <mwhitehe@redhat.com>
Tested-by: Matthew Whitehead <mwhitehe@redhat.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agospi/mpc512x-psc: optionally keep PSC SS asserted across xfer segmensts
Anatolij Gustschin [Wed, 13 Mar 2013 13:57:43 +0000 (14:57 +0100)]
spi/mpc512x-psc: optionally keep PSC SS asserted across xfer segmensts

commit 1ad849aee5f53353ed88d9cd3d68a51b03a7d44f upstream.

Some SPI slave devices require asserted chip select signal across
multiple transfer segments of an SPI message. Currently the driver
always de-asserts the internal SS signal for every single transfer
segment of the message and ignores the 'cs_change' flag of the
transfer description. Disable the internal chip select (SS) only
if this is needed and indicated by the 'cs_change' flag.

Without this change, each partial transfer of a surrounding
multi-part SPI transaction might erroneously change the SS
signal, which might prevent slaves from answering the request
that was sent in a previous transfer segment because the
transaction could be considered aborted (SS was de-asserted
before reading the response).

Reported-by: Gerhard Sittig <gerhard.sittig@ifm.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agovirtio: console: add locking around c_ovq operations
Amit Shah [Fri, 29 Mar 2013 11:00:08 +0000 (16:30 +0530)]
virtio: console: add locking around c_ovq operations

commit 9ba5c80b1aea8648a3efe5f22dc1f7cacdfbeeb8 upstream.

When multiple ovq operations are being performed (lots of open/close
operations on virtio_console fds), the __send_control_msg() function can
get confused without locking.

A simple recipe to cause badness is:
* create a QEMU VM with two virtio-serial ports
* in the guest, do
  while true;do echo abc >/dev/vport0p1;done
  while true;do echo edf >/dev/vport0p2;done

In one run, this caused a panic in __send_control_msg().  In another, I
got

   virtio_console virtio0: control-o:id 0 is not a head!

This also results repeated messages similar to these on the host:

  qemu-kvm: virtio-serial-bus: Unexpected port id 478762112 for device virtio-serial-bus.0
  qemu-kvm: virtio-serial-bus: Unexpected port id 478762368 for device virtio-serial-bus.0

Reported-by: FuXiangChun <xfu@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Asias He <asias@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agovirtio: console: rename cvq_lock to c_ivq_lock
Amit Shah [Fri, 29 Mar 2013 11:00:07 +0000 (16:30 +0530)]
virtio: console: rename cvq_lock to c_ivq_lock

commit 165b1b8bbc17c9469b053bab78b11b7cbce6d161 upstream.

The cvq_lock was taken for the c_ivq.  Rename the lock to make that
obvious.

We'll also add a lock around the c_ovq in the next commit, so there's no
ambiguity.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Asias He <asias@redhat.com>
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[bwh: Backported to 3.2:
 - Adjust context
 - Drop change to virtcons_restore()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agotile: expect new initramfs name from hypervisor file system
Chris Metcalf [Fri, 29 Mar 2013 17:50:21 +0000 (13:50 -0400)]
tile: expect new initramfs name from hypervisor file system

commit ff7f3efb9abf986f4ecd8793a9593f7ca4d6431a upstream.

The current Tilera boot infrastructure now provides the initramfs
to Linux as a Tilera-hypervisor file named "initramfs", rather than
"initramfs.cpio.gz", as before.  (This makes it reasonable to use
other compression techniques than gzip on the file without having to
worry about the name causing confusion.)  Adapt to use the new name,
but also fall back to checking for the old name.

Cc'ing to stable so that older kernels will remain compatible with
newer Tilera boot infrastructure.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoreiserfs: Fix warning and inode leak when deleting inode with xattrs
Jan Kara [Fri, 29 Mar 2013 14:39:16 +0000 (15:39 +0100)]
reiserfs: Fix warning and inode leak when deleting inode with xattrs

commit 35e5cbc0af240778e61113286c019837e06aeec6 upstream.

After commit 21d8a15a (lookup_one_len: don't accept . and ..) reiserfs
started failing to delete xattrs from inode. This was due to a buggy
test for '.' and '..' in fill_with_dentries() which resulted in passing
'.' and '..' entries to lookup_one_len() in some cases. That returned
error and so we failed to iterate over all xattrs of and inode.

Fix the test in fill_with_dentries() along the lines of the one in
lookup_one_len().

Reported-by: Pawel Zawora <pzawora@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agousb: ftdi_sio: Add support for Mitsubishi FX-USB-AW/-BD
Konstantin Holoborodko [Thu, 28 Mar 2013 15:06:13 +0000 (00:06 +0900)]
usb: ftdi_sio: Add support for Mitsubishi FX-USB-AW/-BD

commit 482b0b5d82bd916cc0c55a2abf65bdc69023b843 upstream.

It enhances the driver for FTDI-based USB serial adapters
to recognize Mitsubishi Electric Corp. USB/RS422 Converters
as FT232BM chips and support them.
https://search.meau.com/?q=FX-USB-AW

Signed-off-by: Konstantin Holoborodko <klh.kernel@gmail.com>
Tested-by: Konstantin Holoborodko <klh.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoBtrfs: limit the global reserve to 512mb
Josef Bacik [Tue, 26 Mar 2013 19:31:45 +0000 (15:31 -0400)]
Btrfs: limit the global reserve to 512mb

commit fdf30d1c1b386e1b73116cc7e0fb14e962b763b0 upstream.

A user reported a problem where he was getting early ENOSPC with hundreds of
gigs of free data space and 6 gigs of free metadata space.  This is because the
global block reserve was taking up the entire free metadata space.  This is
ridiculous, we have infrastructure in place to throttle if we start using too
much of the global reserve, so instead of letting it get this huge just limit it
to 512mb so that users can still get work done.  This allowed the user to
complete his rsync without issues.  Thanks

Reported-and-tested-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agotg3: fix length overflow in VPD firmware parsing
Kees Cook [Wed, 27 Mar 2013 06:40:50 +0000 (06:40 +0000)]
tg3: fix length overflow in VPD firmware parsing

commit 715230a44310a8cf66fbfb5a46f9a62a9b2de424 upstream.

Commit 184b89044fb6e2a74611dafa69b1dce0d98612c6 ("tg3: Use VPD fw version
when present") introduced VPD parsing that contained a potential length
overflow.

Limit the hardware's reported firmware string length (max 255 bytes) to
stay inside the driver's firmware string length (32 bytes). On overflow,
truncate the formatted firmware string instead of potentially overwriting
portions of the tg3 struct.

http://cansecwest.com/slides/2013/PrivateCore%20CSW%202013.pdf

Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Oded Horovitz <oded@privatecore.com>
Reported-by: Brad Spengler <spender@grsecurity.net>
Cc: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agob43: A fix for DMA transmission sequence errors
Iestyn C. Elfick [Wed, 20 Mar 2013 19:02:31 +0000 (14:02 -0500)]
b43: A fix for DMA transmission sequence errors

commit b251412db99ccd4495ce372fec7daee27bf06923 upstream.

Intermittently, b43 will report "Out of order TX status report on DMA ring".
When this happens, the driver must be reset before communication can resume.
The cause of the problem is believed to be an error in the closed-source
firmware; however, all versions of the firmware are affected.

This change uses the observation that the expected status is always 2 less
than the observed value, and supplies a fake status report to skip one
header/data pair.

Not all devices suffer from this problem, but it can occur several times
per second under heavy load. As each occurence kills the unmodified driver,
this patch makes if possible for the affected devices to function. The patch
logs only the first instance of the reset operation to prevent spamming
the logs.

Tested-by: Chris Vine <chris@cvine.freeserve.co.uk>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agocan: sja1000: fix define conflict on SH
Marc Kleine-Budde [Wed, 27 Mar 2013 10:36:42 +0000 (11:36 +0100)]
can: sja1000: fix define conflict on SH

commit f901b6bc404b67d96eca739857c097e022727b71 upstream.

Thias patch fixes a define conflict between the SH architecture and the sja1000
driver:

    drivers/net/can/sja1000/sja1000.h:59:0: warning:
        "REG_SR" redefined [enabled by default]
    arch/sh/include/asm/ptrace_32.h:25:0: note:
         this is the location of the previous definition

A SJA1000_ prefix is added to the offending sja1000 define only, to make a
minimal patch suited for stable. A later patch will add a SJA1000_ prefix to
all defines in sja1000.h.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoiommu/amd: Make sure dma_ops are set for hotplug devices
Joerg Roedel [Tue, 26 Mar 2013 21:48:23 +0000 (22:48 +0100)]
iommu/amd: Make sure dma_ops are set for hotplug devices

commit c2a2876e863356b092967ea62bebdb4dd663af80 upstream.

There is a bug introduced with commit 27c2127 that causes
devices which are hot unplugged and then hot-replugged to
not have per-device dma_ops set. This causes these devices
to not function correctly. Fixed with this patch.

Reported-by: Andreas Degert <andreas.degert@googlemail.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agovt: synchronize_rcu() under spinlock is not nice...
Al Viro [Wed, 27 Mar 2013 00:30:17 +0000 (20:30 -0400)]
vt: synchronize_rcu() under spinlock is not nice...

commit e8cd81693bbbb15db57d3c9aa7dd90eda4842874 upstream.

vcs_poll_data_free() calls unregister_vt_notifier(), which calls
atomic_notifier_chain_unregister(), which calls synchronize_rcu().
Do it *after* we'd dropped ->f_lock.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoNest rename_lock inside vfsmount_lock
Al Viro [Tue, 26 Mar 2013 22:25:57 +0000 (18:25 -0400)]
Nest rename_lock inside vfsmount_lock

commit 7ea600b5314529f9d1b9d6d3c41cb26fce6a7a4a upstream.

... lest we get livelocks between path_is_under() and d_path() and friends.

The thing is, wrt fairness lglocks are more similar to rwsems than to rwlocks;
it is possible to have thread B spin on attempt to take lock shared while thread
A is already holding it shared, if B is on lower-numbered CPU than A and there's
a thread C spinning on attempt to take the same lock exclusive.

As the result, we need consistent ordering between vfsmount_lock (lglock) and
rename_lock (seq_lock), even though everything that takes both is going to take
vfsmount_lock only shared.

Spotted-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2:
 - Adjust context
 - s/&vfsmount_lock/vfsmount_lock/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agonfsd4: reject "negative" acl lengths
J. Bruce Fields [Tue, 26 Mar 2013 18:11:13 +0000 (14:11 -0400)]
nfsd4: reject "negative" acl lengths

commit 64a817cfbded8674f345d1117b117f942a351a69 upstream.

Since we only enforce an upper bound, not a lower bound, a "negative"
length can get through here.

The symptom seen was a warning when we attempt to a kmalloc with an
excessive size.

Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agostaging: comedi: s626: fix continuous acquisition
Ian Abbott [Fri, 22 Mar 2013 15:16:29 +0000 (15:16 +0000)]
staging: comedi: s626: fix continuous acquisition

commit e4317ce877a31dbb9d96375391c1c4ad2210d637 upstream.

For the s626 driver, there is a bug in the handling of asynchronous
commands on the AI subdevice when the stop source is `TRIG_NONE`.  The
command should run continuously until cancelled, but the interrupt
handler stops the command running after the first scan.

The command set-up function `s626_ai_cmd()` contains this code:

switch (cmd->stop_src) {
case TRIG_COUNT:
/*  data arrives as one packet */
devpriv->ai_sample_count = cmd->stop_arg;
devpriv->ai_continous = 0;
break;
case TRIG_NONE:
/*  continous acquisition */
devpriv->ai_continous = 1;
devpriv->ai_sample_count = 0;
break;
}

The interrupt handler `s626_irq_handler()` contains this code:

if (!(devpriv->ai_continous))
devpriv->ai_sample_count--;
if (devpriv->ai_sample_count <= 0) {
devpriv->ai_cmd_running = 0;
/* ... */
}

So `devpriv->ai_sample_count` is only decremented for the `TRIG_COUNT`
case, but `devpriv->ai_cmd_running` is set to 0 (and the command
stopped) regardless.

Fix this in `s626_ai_cmd()` by setting `devpriv->ai_sample_count = 1`
for the `TRIG_NONE` case.  The interrupt handler will not decrement it
so it will remain greater than 0 and the check for stopping the
acquisition will fail.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agousb: xhci: Fix TRB transfer length macro used for Event TRB.
Vivek Gautam [Thu, 21 Mar 2013 06:36:48 +0000 (12:06 +0530)]
usb: xhci: Fix TRB transfer length macro used for Event TRB.

commit 1c11a172cb30492f5f6a82c6e118fdcd9946c34f upstream.

Use proper macro while extracting TRB transfer length from
Transfer event TRBs. Adding a macro EVENT_TRB_LEN (bits 0:23)
for the same, and use it instead of TRB_LEN (bits 0:16) in
case of event TRBs.

This patch should be backported to kernels as old as 2.6.31, that
contain the commit b10de142119a676552df3f0d2e3a9d647036c26a "USB: xhci:
Bulk transfer support".  This patch will have issues applying to older
kernels.

Signed-off-by: Vivek gautam <gautam.vivek@samsung.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoSUNRPC: Add barriers to ensure read ordering in rpc_wake_up_task_queue_locked
Trond Myklebust [Mon, 25 Mar 2013 15:23:40 +0000 (11:23 -0400)]
SUNRPC: Add barriers to ensure read ordering in rpc_wake_up_task_queue_locked

commit 1166fde6a923c30f4351515b6a9a1efc513e7d00 upstream.

We need to be careful when testing task->tk_waitqueue in
rpc_wake_up_task_queue_locked, because it can be changed while we
are holding the queue->lock.
By adding appropriate memory barriers, we can ensure that it is safe to
test task->tk_waitqueue for equality if the RPC_TASK_QUEUED bit is set.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoIPoIB: Fix send lockup due to missed TX completion
Mike Marciniszyn [Tue, 26 Feb 2013 15:46:27 +0000 (15:46 +0000)]
IPoIB: Fix send lockup due to missed TX completion

commit 1ee9e2aa7b31427303466776f455d43e5e3c9275 upstream.

Commit f0dc117abdfa ("IPoIB: Fix TX queue lockup with mixed UD/CM
traffic") attempts to solve an issue where unprocessed UD send
completions can deadlock the netdev.

The patch doesn't fully resolve the issue because if more than half
the tx_outstanding's were UD and all of the destinations are RC
reachable, arming the CQ doesn't solve the issue.

This patch uses the IB_CQ_REPORT_MISSED_EVENTS on the
ib_req_notify_cq().  If the rc is above 0, the UD send cq completion
callback is called directly to re-arm the send completion timer.

This issue is seen in very large parallel filesystem deployments
and the patch has been shown to correct the issue.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoASoC: dma-sh7760: Fix compile error
Lars-Peter Clausen [Fri, 15 Mar 2013 10:26:15 +0000 (11:26 +0100)]
ASoC: dma-sh7760: Fix compile error

commit 417a1178f1bf3cdc606376b3ded3a22489fbb3eb upstream.

The dma-sh7760 currently fails with the following compile error:
sound/soc/sh/dma-sh7760.c:346:2: error: unknown field 'pcm_ops' specified in initializer
sound/soc/sh/dma-sh7760.c:346:2: warning: initialization from incompatible pointer type
sound/soc/sh/dma-sh7760.c:347:2: error: unknown field 'pcm_new' specified in initializer
sound/soc/sh/dma-sh7760.c:347:2: warning: initialization makes integer from pointer without a cast
sound/soc/sh/dma-sh7760.c:348:2: error: unknown field 'pcm_free' specified in initializer
sound/soc/sh/dma-sh7760.c:348:2: warning: initialization from incompatible pointer type
sound/soc/sh/dma-sh7760.c: In function 'sh7760_soc_platform_probe':
sound/soc/sh/dma-sh7760.c:353:2: warning: passing argument 2 of 'snd_soc_register_platform' from incompatible pointer type
include/sound/soc.h:368:5: note: expected 'struct snd_soc_platform_driver *' but argument is of type 'struct snd_soc_platform *'

This is due the misnaming of the snd_soc_platform_driver type name and 'ops'
field. The issue was introduced in commit f0fba2a("ASoC: multi-component - ASoC
Multi-Component Support").

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoNFSv4.1: Fix a race in pNFS layoutcommit
Trond Myklebust [Wed, 20 Mar 2013 16:34:32 +0000 (12:34 -0400)]
NFSv4.1: Fix a race in pNFS layoutcommit

commit a073dbff359f4741013ae4b8395f5364c5e00b48 upstream.

We need to clear the NFS_LSEG_LAYOUTCOMMIT bits atomically with the
NFS_INO_LAYOUTCOMMIT bit, otherwise we may end up with situations
where the two are out of sync.
The first half of the problem is to ensure that pnfs_layoutcommit_inode
clears the NFS_LSEG_LAYOUTCOMMIT bit through pnfs_list_write_lseg.
We still need to keep the reference to those segments until the RPC call
is finished, so in order to make it clear _where_ those references come
from, we add a helper pnfs_list_write_lseg_done() that cleans up after
pnfs_list_write_lseg.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Benny Halevy <bhalevy@tonian.com>
[bwh: Backported to 3.2: s/pnfs_put_lseg/put_lseg/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agopnfs-block: removing DM device maybe cause oops when call dev_remove
fanchaoting [Thu, 21 Mar 2013 01:15:30 +0000 (09:15 +0800)]
pnfs-block: removing DM device maybe cause oops when call dev_remove

commit 4376c94618c26225e69e17b7c91169c45a90b292 upstream.

when pnfs block using device mapper,if umounting later,it maybe
cause oops. we apply "1 + sizeof(bl_umount_request)" memory for
msg->data, the memory maybe overflow when we do "memcpy(&dataptr
[sizeof(bl_msg)], &bl_umount_request, sizeof(bl_umount_request))",
because the size of bl_msg is more than 1 byte.

Signed-off-by: fanchaoting<fanchaoting@cn.fujitsu.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[bwh: Backported to 3.2:
 - In dev_remove(), msg is a structure not a pointer to it]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agosysfs: handle failure path correctly for readdir()
Ming Lei [Wed, 20 Mar 2013 15:25:25 +0000 (23:25 +0800)]
sysfs: handle failure path correctly for readdir()

commit e5110f411d2ee35bf8d202ccca2e89c633060dca upstream.

In case of 'if (filp->f_pos ==  0 or 1)' of sysfs_readdir(),
the failure from filldir() isn't handled, and the reference counter
of the sysfs_dirent object pointed by filp->private_data will be
released without clearing filp->private_data, so use after free
bug will be triggered later.

This patch returns immeadiately under the situation for fixing the bug,
and it is reasonable to return from readdir() when filldir() fails.

Reported-by: Dave Jones <davej@redhat.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agosysfs: fix race between readdir and lseek
Ming Lei [Wed, 20 Mar 2013 15:25:24 +0000 (23:25 +0800)]
sysfs: fix race between readdir and lseek

commit 991f76f837bf22c5bb07261cfd86525a0a96650c upstream.

While readdir() is running, lseek() may set filp->f_pos as zero,
then may leave filp->private_data pointing to one sysfs_dirent
object without holding its reference counter, so the sysfs_dirent
object may be used after free in next readdir().

This patch holds inode->i_mutex to avoid the problem since
the lock is always held in readdir path.

Reported-by: Dave Jones <davej@redhat.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: open-code file_inode() which we don't have]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agonet/irda: add missing error path release_sock call
Kees Cook [Wed, 20 Mar 2013 05:19:24 +0000 (05:19 +0000)]
net/irda: add missing error path release_sock call

commit 896ee0eee6261e30c3623be931c3f621428947df upstream.

This makes sure that release_sock is called for all error conditions in
irda_getsockopt.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoxen-blkback: fix dispatch_rw_block_io() error path
Jan Beulich [Mon, 11 Mar 2013 09:39:55 +0000 (09:39 +0000)]
xen-blkback: fix dispatch_rw_block_io() error path

commit 0e5e098ac22dae38f957e951b70d3cf73beff0f7 upstream.

Commit 7708992 ("xen/blkback: Seperate the bio allocation and the bio
submission") consolidated the pendcnt updates to just a single write,
neglecting the fact that the error path relied on it getting set to 1
up front (such that the decrement in __end_block_io_op() would actually
drop the count to zero, triggering the necessary cleanup actions).

Also remove a misleading and a stale (after said commit) comment.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agortlwifi: usb: add missing freeing of skbuff
Jussi Kivilinna [Sun, 17 Mar 2013 09:54:04 +0000 (11:54 +0200)]
rtlwifi: usb: add missing freeing of skbuff

commit 36ef0b473fbf43d5db23eea4616cc1d18cec245f upstream.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoath9k_hw: revert chainmask to user configuration after calibration
Felix Fietkau [Fri, 15 Mar 2013 13:53:31 +0000 (14:53 +0100)]
ath9k_hw: revert chainmask to user configuration after calibration

commit 74632d11a133b5baf6b9d622dd19d2f944d93d94 upstream.

The commit 'ath9k_hw: fix calibration issues on chainmask that don't
include chain 0' changed the hardware chainmask to the chip chainmask
for the duration of the calibration, but the revert to user
configuration in the reset path runs too early.

That causes some issues with limiting the number of antennas (including
spurious failure in hardware-generated packets).

Fix this by reverting the chainmask after the essential parts of the
calibration that need the workaround, and before NF calibration is run.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Reported-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Tested-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoBluetooth: Add support for Dell[QCA 0cf3:817a]
Ming Lei [Mon, 18 Mar 2013 15:45:11 +0000 (23:45 +0800)]
Bluetooth: Add support for Dell[QCA 0cf3:817a]

commit ebaf5795ef57a70a042ea259448a465024e2821d upstream.

Add support for the AR9462 chip

T:  Bus=03 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#=  5 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=817a Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoHID: usbhid: fix build problem
Jiri Kosina [Mon, 18 Mar 2013 14:50:10 +0000 (15:50 +0100)]
HID: usbhid: fix build problem

commit 570637dc8eeb2faba06228d497ff40bb019bcc93 upstream.

Fix build problem caused by typo introduced by 620ae90ed8
("HID: usbhid: quirk for MSI GX680R led panel").

Reported-by: fengguang.wu@intel.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoHID: usbhid: quirk for MSI GX680R led panel
Josh Boyer [Mon, 18 Mar 2013 13:47:02 +0000 (09:47 -0400)]
HID: usbhid: quirk for MSI GX680R led panel

commit 620ae90ed8ca8b6e40cb9e10279b4f5ef9f0ab81 upstream.

This keyboard backlight device causes a 10 second delay to boot.  Add it
to the quirk list with HID_QUIRK_NO_INIT_REPORTS.

This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=907221

Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoHID: usbhid: quirk for Realtek Multi-card reader
Josh Boyer [Mon, 18 Mar 2013 13:45:42 +0000 (09:45 -0400)]
HID: usbhid: quirk for Realtek Multi-card reader

commit 3d464d9b71ef2f2b40a4bc9dcf06794fd1be9d12 upstream.

This device needs to be added to the quirks list with HID_QUIRK_NO_INIT_REPORTS,
otherwise it causes 10 seconds timeout during report initialization.

This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=806587

Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agotty: atmel_serial_probe(): index of atmel_ports[] fix
Pawel Wieczorkiewicz [Wed, 20 Feb 2013 16:26:20 +0000 (17:26 +0100)]
tty: atmel_serial_probe(): index of atmel_ports[] fix

commit 503bded92da283b2f31d87e054c4c6d30c3c2340 upstream.

Index of atmel_ports[ATMEL_MAX_UART] should be smaller
than ATMEL_MAX_UART.

Signed-off-by: Pawel Wieczorkiewicz <wpawel@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoBluetooth: Add support for Dell[QCA 0cf3:0036]
Ming Lei [Fri, 15 Mar 2013 03:00:39 +0000 (11:00 +0800)]
Bluetooth: Add support for Dell[QCA 0cf3:0036]

commit d66629c1325399cf080ba8b2fb086c10e5439cdd upstream.

Add support for the AR9462 chip

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=0036 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoBluetooth: Device 0cf3:3008 should map AR 3012
Sunguk Lee [Mon, 11 Mar 2013 19:41:58 +0000 (04:41 +0900)]
Bluetooth: Device 0cf3:3008 should map AR 3012

commit 94a32d10f47b637ae24b78b1ddc7ef0e8396fda4 upstream.

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=3008 Rev= 0.01
S:  Manufacturer=Atheros Communications
S:  Product=Bluetooth USB Host Controller
S:  SerialNumber=Alaska Day 2006
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Sunguk Lee <d3m3vilurr@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoBluetooth: Add support for atheros 04ca:3004 device to ath3k
Josh Boyer [Tue, 19 Feb 2013 16:54:16 +0000 (11:54 -0500)]
Bluetooth: Add support for atheros 04ca:3004 device to ath3k

commit 3f63c340a72f2872a9362245cb2e03f3d2bb73a6 upstream.

Yet another version of the atheros bluetooth chipset

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=3004 Rev=00.01
S:  Manufacturer=Atheros Communications
S:  Product=Bluetooth USB Host Controller
S:  SerialNumber=Alaska Day 2006
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

This resolves https://bugzilla.redhat.com/show_bug.cgi?id=844750

Reported-by: niktr@mail.ru
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoBluetooth device 04ca:3008 should use ath3k
Sergio Cambra [Thu, 10 Jan 2013 00:06:55 +0000 (01:06 +0100)]
Bluetooth device 04ca:3008 should use ath3k

commit f4d6f7dce71a5da93da50272ff1670bf2f1146b1 upstream.

Output of /sys/kernel/debug/usb/devices
T:  Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  6 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=3008 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Sergio Cambra <sergio@programatica.es>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoBluetooth: Add support for Foxconn / Hon Hai [0489:e056]
AceLan Kao [Thu, 3 Jan 2013 04:25:00 +0000 (12:25 +0800)]
Bluetooth: Add support for Foxconn / Hon Hai [0489:e056]

commit 2582d529c44d12502a700f1c3db062b9f44679bc upstream.

Add support for the AR9462 chip

T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e056 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoBluetooth: Add support for Foxconn / Hon Hai [0489:e04e]
AceLan Kao [Thu, 3 Jan 2013 04:24:59 +0000 (12:24 +0800)]
Bluetooth: Add support for Foxconn / Hon Hai [0489:e04e]

commit 3a61eda81ebcfc006ebb1496764299d53e5bf67f upstream.

Add support for the AR9462 chip

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e04e Rev=00.02
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoBluetooth: Add support for GC-WB300D PCIe [04ca:3006] to ath3k.
Daniel Schaal [Sat, 29 Dec 2012 10:14:34 +0000 (11:14 +0100)]
Bluetooth: Add support for GC-WB300D PCIe [04ca:3006] to ath3k.

commit 2c262b2a5235b7f5b18d4d58394511f76371d7cb upstream.

T:  Bus=02 Lev=02 Prnt=02 Port=06 Cnt=01 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=3006 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Daniel Schaal <farbing@web.de>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoBluetooth: Add support for IMC Networks [13d3:3393]
AceLan Kao [Tue, 11 Dec 2012 03:41:20 +0000 (11:41 +0800)]
Bluetooth: Add support for IMC Networks [13d3:3393]

commit eed307e290b96636def331375e065aca43f9069a upstream.

Add support for the AR9462 chip

T:  Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3393 Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoUBIFS: make space fixup work in the remount case
Artem Bityutskiy [Thu, 14 Mar 2013 08:49:23 +0000 (10:49 +0200)]
UBIFS: make space fixup work in the remount case

commit 67e753ca41782913d805ff4a8a2b0f60b26b7915 upstream.

The UBIFS space fixup is a useful feature which allows to fixup the "broken"
flash space at the time of the first mount. The "broken" space is usually the
result of using a "dumb" industrial flasher which is not able to skip empty
NAND pages and just writes all 0xFFs to the empty space, which has grave
side-effects for UBIFS when UBIFS trise to write useful data to those empty
pages.

The fix-up feature works roughly like this:
1. mkfs.ubifs sets the fixup flag in UBIFS superblock when creating the image
   (see -F option)
2. when the file-system is mounted for the first time, UBIFS notices the fixup
   flag and re-writes the entire media atomically, which may take really a lot
   of time.
3. UBIFS clears the fixup flag in the superblock.

This works fine when the file system is mounted R/W for the very first time.
But it did not really work in the case when we first mount the file-system R/O,
and then re-mount R/W. The reason was that we started the fixup procedure too
late, which we cannot really do because we have to fixup the space before it
starts being used.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reported-by: Mark Jackson <mpfj-list@mimc.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoASoC: imx-ssi: Fix occasional AC97 reset failure
Sascha Hauer [Sun, 10 Mar 2013 18:33:03 +0000 (19:33 +0100)]
ASoC: imx-ssi: Fix occasional AC97 reset failure

commit b6e51600f4e983e757b1b6942becaa1ae7d82e67 upstream.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoclockevents: Don't allow dummy broadcast timers
Mark Rutland [Thu, 7 Mar 2013 15:09:24 +0000 (15:09 +0000)]
clockevents: Don't allow dummy broadcast timers

commit a7dc19b8652c862d5b7c4d2339bd3c428bd29c4a upstream.

Currently tick_check_broadcast_device doesn't reject clock_event_devices
with CLOCK_EVT_FEAT_DUMMY, and may select them in preference to real
hardware if they have a higher rating value. In this situation, the
dummy timer is responsible for broadcasting to itself, and the core
clockevents code may attempt to call non-existent callbacks for
programming the dummy, eventually leading to a panic.

This patch makes tick_check_broadcast_device always reject dummy timers,
preventing this problem.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jon Medhurst (Tixy) <tixy@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoLinux 3.2.42 v3.2.42
Ben Hutchings [Wed, 27 Mar 2013 02:41:26 +0000 (02:41 +0000)]
Linux 3.2.42

9 years agokernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORER
Andrew Morton [Wed, 13 Mar 2013 21:59:34 +0000 (14:59 -0700)]
kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORER

commit 522cff142d7d2f9230839c9e1f21a4d8bcc22a4a upstream.

__ARCH_HAS_SA_RESTORER is the preferred conditional for use in 3.9 and
later kernels, per Kees.

Cc: Emese Revfy <re.emese@gmail.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Julien Tinnes <jln@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agosignal: Define __ARCH_HAS_SA_RESTORER so we know whether to clear sa_restorer
Ben Hutchings [Mon, 26 Nov 2012 03:24:19 +0000 (22:24 -0500)]
signal: Define __ARCH_HAS_SA_RESTORER so we know whether to clear sa_restorer

flush_signal_handlers() needs to know whether sigaction::sa_restorer
is defined, not whether SA_RESTORER is defined.  Define the
__ARCH_HAS_SA_RESTORER macro to indicate this.

Vaguely based on upstream commit 574c4866e33d 'consolidate kernel-side
struct sigaction declarations'.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
9 years agoefivars: pstore: Do not check size when erasing variable
Ben Hutchings [Sat, 23 Mar 2013 03:49:53 +0000 (03:49 +0000)]
efivars: pstore: Do not check size when erasing variable

In 3.2, unlike mainline, efi_pstore_erase() calls efi_pstore_write()
with a size of 0, as the underlying EFI interface treats a size of 0
as meaning deletion.

This was not taken into account in my backport of commit d80a361d779a
'efi_pstore: Check remaining space with QueryVariableInfo() before
writing data'.  The size check should be omitted when erasing.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoKMS: fix EDID detailed timing frame rate
Torsten Duwe [Sat, 23 Mar 2013 14:39:34 +0000 (15:39 +0100)]
KMS: fix EDID detailed timing frame rate

commit c19b3b0f6eed552952845e4ad908dba2113d67b4 upstream.

When KMS has parsed an EDID "detailed timing", it leaves the frame rate
zeroed.  Consecutive (debug-) output of that mode thus yields 0 for
vsync.  This simple fix also speeds up future invocations of
drm_mode_vrefresh().

While it is debatable whether this qualifies as a -stable fix I'd apply
it for consistency's sake; drm_helper_probe_single_connector_modes()
does the same thing already for all probed modes.

Signed-off-by: Torsten Duwe <duwe@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoKMS: fix EDID detailed timing vsync parsing
Torsten Duwe [Sat, 23 Mar 2013 14:38:22 +0000 (15:38 +0100)]
KMS: fix EDID detailed timing vsync parsing

commit 16dad1d743d31a104a849c8944e6b9eb479f6cd7 upstream.

EDID spreads some values across multiple bytes; bit-fiddling is needed
to retrieve these.  The current code to parse "detailed timings" has a
cut&paste error that results in a vsync offset of at most 15 lines
instead of 63.

See

   http://en.wikipedia.org/wiki/EDID

and in the "EDID Detailed Timing Descriptor" see bytes 10+11 show why
that needs to be a left shift.

Signed-off-by: Torsten Duwe <duwe@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agomm/hugetlb: fix total hugetlbfs pages count when using memory overcommit accouting
Wanpeng Li [Fri, 22 Mar 2013 22:04:40 +0000 (15:04 -0700)]
mm/hugetlb: fix total hugetlbfs pages count when using memory overcommit accouting

commit d00285884c0892bb1310df96bce6056e9ce9b9d9 upstream.

hugetlb_total_pages is used for overcommit calculations but the current
implementation considers only the default hugetlb page size (which is
either the first defined hugepage size or the one specified by
default_hugepagesz kernel boot parameter).

If the system is configured for more than one hugepage size, which is
possible since commit a137e1cc6d6e ("hugetlbfs: per mount huge page
sizes") then the overcommit estimation done by __vm_enough_memory()
(resp.  shown by meminfo_proc_show) is not precise - there is an
impression of more available/allowed memory.  This can lead to an
unexpected ENOMEM/EFAULT resp.  SIGSEGV when memory is accounted.

Testcase:
  boot: hugepagesz=1G hugepages=1
  the default overcommit ratio is 50
  before patch:

    egrep 'CommitLimit' /proc/meminfo
    CommitLimit:     55434168 kB

  after patch:

    egrep 'CommitLimit' /proc/meminfo
    CommitLimit:     54909880 kB

[akpm@linux-foundation.org: coding-style tweak]
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agovfs,proc: guarantee unique inodes in /proc
Linus Torvalds [Fri, 22 Mar 2013 18:44:04 +0000 (11:44 -0700)]
vfs,proc: guarantee unique inodes in /proc

commit 51f0885e5415b4cc6535e9cdcc5145bfbc134353 upstream.

Dave Jones found another /proc issue with his Trinity tool: thanks to
the namespace model, we can have multiple /proc dentries that point to
the same inode, aliasing directories in /proc/<pid>/net/ for example.

This ends up being a total disaster, because it acts like hardlinked
directories, and causes locking problems.  We rely on the topological
sort of the inodes pointed to by dentries, and if we have aliased
directories, that odering becomes unreliable.

In short: don't do this.  Multiple dentries with the same (directory)
inode is just a bad idea, and the namespace code should never have
exposed things this way.  But we're kind of stuck with it.

This solves things by just always allocating a new inode during /proc
dentry lookup, instead of using "iget_locked()" to look up existing
inodes by superblock and number.  That actually simplies the code a bit,
at the cost of potentially doing more inode [de]allocations.

That said, the inode lookup wasn't free either (and did a lot of locking
of inodes), so it is probably not that noticeable.  We could easily keep
the old lookup model for non-directory entries, but rather than try to
be excessively clever this just implements the minimal and simplest
workaround for the problem.

Reported-and-tested-by: Dave Jones <davej@redhat.com>
Analyzed-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2:
 - Adjust context
 - Never drop the pde reference in proc_get_inode(), as callers only
   expect this when we return an existing inode, and we never do that now]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoi2c: tegra: check the clk_prepare_enable() return value
Laxman Dewangan [Fri, 15 Mar 2013 05:34:08 +0000 (05:34 +0000)]
i2c: tegra: check the clk_prepare_enable() return value

commit 132c803f7b70b17322579f6f4f3f65cf68e55135 upstream.

NVIDIA's Tegra SoC allows read/write of controller register only
if controller clock is enabled. System hangs if read/write happens
to registers without enabling clock.

clk_prepare_enable() can be fail due to unknown reason and hence
adding check for return value of this function. If this function
success then only access register otherwise return to caller with
error.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
[bwh: Backported to 3.2:
 - Adjust context
 - Keep calling clk_enable() directly]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoUSB: serial: fix interface refcounting
Johan Hovold [Tue, 19 Mar 2013 08:21:09 +0000 (09:21 +0100)]
USB: serial: fix interface refcounting

commit d7971051e4df825e0bc11b995e87bfe86355b8e5 upstream.

Make sure the interface is not released before our serial device.

Note that drivers are still not allowed to access the interface in
any way that may interfere with another driver that may have gotten
bound to the same interface after disconnect returns.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoUSB: io_ti: fix get_icount for two port adapters
Johan Hovold [Tue, 19 Mar 2013 08:21:08 +0000 (09:21 +0100)]
USB: io_ti: fix get_icount for two port adapters

commit 5492bf3d5655b4954164f69c02955a7fca267611 upstream.

Add missing get_icount field to two-port driver.

The two-port driver was not updated when switching to the new icount
interface in commit 0bca1b913aff ("tty: Convert the USB drivers to the
new icount interface").

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoUSB: garmin_gps: fix memory leak on disconnect
Johan Hovold [Tue, 19 Mar 2013 08:21:07 +0000 (09:21 +0100)]
USB: garmin_gps: fix memory leak on disconnect

commit 618aa1068df29c37a58045fe940f9106664153fd upstream.

Remove bogus disconnect test introduced by 95bef012e ("USB: more serial
drivers writing after disconnect") which prevented queued data from
being freed on disconnect.

The possible IO it was supposed to prevent is long gone.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agocifs: ignore everything in SPNEGO blob after mechTypes
Jeff Layton [Mon, 11 Mar 2013 13:52:19 +0000 (09:52 -0400)]
cifs: ignore everything in SPNEGO blob after mechTypes

commit f853c616883a8de966873a1dab283f1369e275a1 upstream.

We've had several reports of people attempting to mount Windows 8 shares
and getting failures with a return code of -EINVAL. The default sec=
mode changed recently to sec=ntlmssp. With that, we expect and parse a
SPNEGO blob from the server in the NEGOTIATE reply.

The current decode_negTokenInit function first parses all of the
mechTypes and then tries to parse the rest of the negTokenInit reply.
The parser however currently expects a mechListMIC or nothing to follow the
mechTypes, but Windows 8 puts a mechToken field there instead to carry
some info for the new NegoEx stuff.

In practice, we don't do anything with the fields after the mechTypes
anyway so I don't see any real benefit in continuing to parse them.
This patch just has the kernel ignore the fields after the mechTypes.
We'll probably need to reinstate some of this if we ever want to support
NegoEx.

Reported-by: Jason Burgess <jason@jacknife2.dns2go.com>
Reported-by: Yan Li <elliot.li.tech@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoefivars: Handle duplicate names from get_next_variable()
Matt Fleming [Thu, 7 Mar 2013 11:59:14 +0000 (11:59 +0000)]
efivars: Handle duplicate names from get_next_variable()

commit e971318bbed610e28bb3fde9d548e6aaf0a6b02e upstream.

Some firmware exhibits a bug where the same VariableName and
VendorGuid values are returned on multiple invocations of
GetNextVariableName(). See,

    https://bugzilla.kernel.org/show_bug.cgi?id=47631

As a consequence of such a bug, Andre reports hitting the following
WARN_ON() in the sysfs code after updating the BIOS on his, "Gigabyte
Technology Co., Ltd. To be filled by O.E.M./Z77X-UD3H, BIOS F19e
11/21/2012)" machine,

[    0.581554] EFI Variables Facility v0.08 2004-May-17
[    0.584914] ------------[ cut here ]------------
[    0.585639] WARNING: at /home/andre/linux/fs/sysfs/dir.c:536 sysfs_add_one+0xd4/0x100()
[    0.586381] Hardware name: To be filled by O.E.M.
[    0.587123] sysfs: cannot create duplicate filename '/firmware/efi/vars/SbAslBufferPtrVar-01f33c25-764d-43ea-aeea-6b5a41f3f3e8'
[    0.588694] Modules linked in:
[    0.589484] Pid: 1, comm: swapper/0 Not tainted 3.8.0+ #7
[    0.590280] Call Trace:
[    0.591066]  [<ffffffff81208954>] ? sysfs_add_one+0xd4/0x100
[    0.591861]  [<ffffffff810587bf>] warn_slowpath_common+0x7f/0xc0
[    0.592650]  [<ffffffff810588bc>] warn_slowpath_fmt+0x4c/0x50
[    0.593429]  [<ffffffff8134dd85>] ? strlcat+0x65/0x80
[    0.594203]  [<ffffffff81208954>] sysfs_add_one+0xd4/0x100
[    0.594979]  [<ffffffff81208b78>] create_dir+0x78/0xd0
[    0.595753]  [<ffffffff81208ec6>] sysfs_create_dir+0x86/0xe0
[    0.596532]  [<ffffffff81347e4c>] kobject_add_internal+0x9c/0x220
[    0.597310]  [<ffffffff81348307>] kobject_init_and_add+0x67/0x90
[    0.598083]  [<ffffffff81584a71>] ? efivar_create_sysfs_entry+0x61/0x1c0
[    0.598859]  [<ffffffff81584b2b>] efivar_create_sysfs_entry+0x11b/0x1c0
[    0.599631]  [<ffffffff8158517e>] register_efivars+0xde/0x420
[    0.600395]  [<ffffffff81d430a7>] ? edd_init+0x2f5/0x2f5
[    0.601150]  [<ffffffff81d4315f>] efivars_init+0xb8/0x104
[    0.601903]  [<ffffffff8100215a>] do_one_initcall+0x12a/0x180
[    0.602659]  [<ffffffff81d05d80>] kernel_init_freeable+0x13e/0x1c6
[    0.603418]  [<ffffffff81d05586>] ? loglevel+0x31/0x31
[    0.604183]  [<ffffffff816a6530>] ? rest_init+0x80/0x80
[    0.604936]  [<ffffffff816a653e>] kernel_init+0xe/0xf0
[    0.605681]  [<ffffffff816ce7ec>] ret_from_fork+0x7c/0xb0
[    0.606414]  [<ffffffff816a6530>] ? rest_init+0x80/0x80
[    0.607143] ---[ end trace 1609741ab737eb29 ]---

There's not much we can do to work around and keep traversing the
variable list once we hit this firmware bug. Our only solution is to
terminate the loop because, as Lingzhu reports, some machines get
stuck when they encounter duplicate names,

  > I had an IBM System x3100 M4 and x3850 X5 on which kernel would
  > get stuck in infinite loop creating duplicate sysfs files because,
  > for some reason, there are several duplicate boot entries in nvram
  > getting GetNextVariableName into a circle of iteration (with
  > period > 2).

Also disable the workqueue, as efivar_update_sysfs_entries() uses
GetNextVariableName() to figure out which variables have been created
since the last iteration. That algorithm isn't going to work if
GetNextVariableName() returns duplicates. Note that we don't disable
EFI variable creation completely on the affected machines, it's just
that any pstore dump-* files won't appear in sysfs until the next
boot.

Reported-by: Andre Heider <a.heider@gmail.com>
Reported-by: Lingzhu Xiang <lxiang@redhat.com>
Tested-by: Lingzhu Xiang <lxiang@redhat.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
[bwh: Backported to 3.2: reason is not checked in efi_pstore_write()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoefivars: explicitly calculate length of VariableName
Matt Fleming [Fri, 1 Mar 2013 14:49:12 +0000 (14:49 +0000)]
efivars: explicitly calculate length of VariableName

commit ec50bd32f1672d38ddce10fb1841cbfda89cfe9a upstream.

It's not wise to assume VariableNameSize represents the length of
VariableName, as not all firmware updates VariableNameSize in the same
way (some don't update it at all if EFI_SUCCESS is returned). There
are even implementations out there that update VariableNameSize with
values that are both larger than the string returned in VariableName
and smaller than the buffer passed to GetNextVariableName(), which
resulted in the following bug report from Michael Schroeder,

  > On HP z220 system (firmware version 1.54), some EFI variables are
  > incorrectly named :
  >
  > ls -d /sys/firmware/efi/vars/*8be4d* | grep -v -- -8be returns
  > /sys/firmware/efi/vars/dbxDefault-pport8be4df61-93ca-11d2-aa0d-00e098032b8c
  > /sys/firmware/efi/vars/KEKDefault-pport8be4df61-93ca-11d2-aa0d-00e098032b8c
  > /sys/firmware/efi/vars/SecureBoot-pport8be4df61-93ca-11d2-aa0d-00e098032b8c
  > /sys/firmware/efi/vars/SetupMode-Information8be4df61-93ca-11d2-aa0d-00e098032b8c

The issue here is that because we blindly use VariableNameSize without
verifying its value, we can potentially read garbage values from the
buffer containing VariableName if VariableNameSize is larger than the
length of VariableName.

Since VariableName is a string, we can calculate its size by searching
for the terminating NULL character.

Reported-by: Frederic Crozat <fcrozat@suse.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Michael Schroeder <mls@suse.com>
Cc: Lee, Chun-Yi <jlee@suse.com>
Cc: Lingzhu Xiang <lxiang@redhat.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoefi_pstore: Introducing workqueue updating sysfs
Seiji Aguchi [Tue, 12 Feb 2013 21:04:41 +0000 (13:04 -0800)]
efi_pstore: Introducing workqueue updating sysfs

commit a93bc0c6e07ed9bac44700280e65e2945d864fd4 upstream.

[Problem]
efi_pstore creates sysfs entries, which enable users to access to NVRAM,
in a write callback. If a kernel panic happens in an interrupt context,
it may fail because it could sleep due to dynamic memory allocations during
creating sysfs entries.

[Patch Description]
This patch removes sysfs operations from a write callback by introducing
a workqueue updating sysfs entries which is scheduled after the write
callback is called.

Also, the workqueue is kicked in a just oops case.
A system will go down in other cases such as panic, clean shutdown and emergency
restart. And we don't need to create sysfs entries because there is no chance for
users to access to them.

efi_pstore will be robust against a kernel panic in an interrupt context with this patch.

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
[bwh: Backported to 3.2:
 - Adjust contest
 - Don't check reason in efi_pstore_write(), as it is not given as a
   parameter
 - Move up declaration of __efivars]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoefivars: Fix check for CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE
Ben Hutchings [Fri, 22 Mar 2013 19:56:51 +0000 (19:56 +0000)]
efivars: Fix check for CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE

commit ca0ba26fbbd2d81c43085df49ce0abfe34535a90 upstream.

The 'CONFIG_' prefix is not implicit in IS_ENABLED().

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
9 years agoefivars: Add module parameter to disable use as a pstore backend
Seth Forshee [Mon, 11 Mar 2013 21:17:50 +0000 (16:17 -0500)]
efivars: Add module parameter to disable use as a pstore backend

commit ec0971ba5372a4dfa753f232449d23a8fd98490e upstream.

We know that with some firmware implementations writing too much data to
UEFI variables can lead to bricking machines. Recent changes attempt to
address this issue, but for some it may still be prudent to avoid
writing large amounts of data until the solution has been proven on a
wide variety of hardware.

Crash dumps or other data from pstore can potentially be a large data
source. Add a pstore_module parameter to efivars to allow disabling its
use as a backend for pstore. Also add a config option,
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE, to allow setting the default
value of this paramter to true (i.e. disabled by default).

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoefivars: Allow disabling use as a pstore backend
Seth Forshee [Thu, 7 Mar 2013 17:40:17 +0000 (11:40 -0600)]
efivars: Allow disabling use as a pstore backend

commit ed9dc8ce7a1c8115dba9483a9b51df8b63a2e0ef upstream.

Add a new option, CONFIG_EFI_VARS_PSTORE, which can be set to N to
avoid using efivars as a backend to pstore, as some users may want to
compile out the code completely.

Set the default to Y to maintain backwards compatability, since this
feature has always been enabled until now.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agodm thin: fix discard corruption
Joe Thornber [Wed, 20 Mar 2013 17:21:24 +0000 (17:21 +0000)]
dm thin: fix discard corruption

commit f046f89a99ccfd9408b94c653374ff3065c7edb3 upstream.

Fix a bug in dm_btree_remove that could leave leaf values with incorrect
reference counts.  The effect of this was that removal of a shared block
could result in the space maps thinking the block was no longer used.
More concretely, if you have a thin device and a snapshot of it, sending
a discard to a shared region of the thin could corrupt the snapshot.

Thinp uses a 2-level nested btree to store it's mappings.  This first
level is indexed by thin device, and the second level by logical
block.

Often when we're removing an entry in this mapping tree we need to
rebalance nodes, which can involve shadowing them, possibly creating a
copy if the block is shared.  If we do create a copy then children of
that node need to have their reference counts incremented.  In this
way reference counts percolate down the tree as shared trees diverge.

The rebalance functions were incrementing the children at the
appropriate time, but they were always assuming the children were
internal nodes.  This meant the leaf values (in our case packed
block/flags entries) were not being incremented.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
[bwh: Backported to 3.2: bump target version numbers from 1.0.1 to 1.0.2]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agousb: gadget: udc-core: fix a regression during gadget driver unbinding
Alan Stern [Fri, 15 Mar 2013 18:02:14 +0000 (14:02 -0400)]
usb: gadget: udc-core: fix a regression during gadget driver unbinding

commit 511f3c5326eabe1ece35202a404c24c0aeacc246 upstream.

This patch (as1666) fixes a regression in the UDC core.  The core
takes care of unbinding gadget drivers, and it does the unbinding
before telling the UDC driver to turn off the controller hardware.
When the call to the udc_stop callback is made, the gadget no longer
has a driver.  The callback routine should not be invoked with a
pointer to the old driver; doing so can cause problems (such as
use-after-free accesses in net2280).

This patch should be applied, with appropriate context changes, to all
the stable kernels going back to 3.1.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoALSA: hda - Fix typo in checking IEC958 emphasis bit
Takashi Iwai [Wed, 20 Mar 2013 14:42:00 +0000 (15:42 +0100)]
ALSA: hda - Fix typo in checking IEC958 emphasis bit

commit a686fd141e20244ad75f80ad54706da07d7bb90a upstream.

There is a typo in convert_to_spdif_status() about checking the
emphasis IEC958 status bit.  It should check the given value instead
of the resultant value.

Reported-by: Martin Weishart <martin.weishart@telosalliance.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoext4: fix data=journal fast mount/umount hang
Theodore Ts'o [Wed, 20 Mar 2013 13:42:11 +0000 (09:42 -0400)]
ext4: fix data=journal fast mount/umount hang

commit 2b405bfa84063bfa35621d2d6879f52693c614b0 upstream.

In data=journal mode, if we unmount the file system before a
transaction has a chance to complete, when the journal inode is being
evicted, we can end up calling into jbd2_log_wait_commit() for the
last transaction, after the journalling machinery has been shut down.

Arguably we should adjust ext4_should_journal_data() to return FALSE
for the journal inode, but the only place it matters is
ext4_evict_inode(), and so to save a bit of CPU time, and to make the
patch much more obviously correct by inspection(tm), we'll fix it by
explicitly not trying to waiting for a journal commit when we are
evicting the journal inode, since it's guaranteed to never succeed in
this case.

This can be easily replicated via:

     mount -t ext4 -o data=journal /dev/vdb /vdb ; umount /vdb

------------[ cut here ]------------
WARNING: at /usr/projects/linux/ext4/fs/jbd2/journal.c:542 __jbd2_log_start_commit+0xba/0xcd()
Hardware name: Bochs
JBD2: bad log_start_commit: 3005630206 3005630206 0 0
Modules linked in:
Pid: 2909, comm: umount Not tainted 3.8.0-rc3 #1020
Call Trace:
 [<c015c0ef>] warn_slowpath_common+0x68/0x7d
 [<c02b7e7d>] ? __jbd2_log_start_commit+0xba/0xcd
 [<c015c177>] warn_slowpath_fmt+0x2b/0x2f
 [<c02b7e7d>] __jbd2_log_start_commit+0xba/0xcd
 [<c02b8075>] jbd2_log_start_commit+0x24/0x34
 [<c0279ed5>] ext4_evict_inode+0x71/0x2e3
 [<c021f0ec>] evict+0x94/0x135
 [<c021f9aa>] iput+0x10a/0x110
 [<c02b7836>] jbd2_journal_destroy+0x190/0x1ce
 [<c0175284>] ? bit_waitqueue+0x50/0x50
 [<c028d23f>] ext4_put_super+0x52/0x294
 [<c020efe3>] generic_shutdown_super+0x48/0xb4
 [<c020f071>] kill_block_super+0x22/0x60
 [<c020f3e0>] deactivate_locked_super+0x22/0x49
 [<c020f5d6>] deactivate_super+0x30/0x33
 [<c0222795>] mntput_no_expire+0x107/0x10c
 [<c02233a7>] sys_umount+0x2cf/0x2e0
 [<c02233ca>] sys_oldumount+0x12/0x14
 [<c08096b8>] syscall_call+0x7/0xb
---[ end trace 6a954cc790501c1f ]---
jbd2_log_wait_commit: error: j_commit_request=-1289337090, tid=0

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoALSA: snd-usb: mixer: ignore -EINVAL in snd_usb_mixer_controls()
Daniel Mack [Tue, 19 Mar 2013 20:09:25 +0000 (21:09 +0100)]
ALSA: snd-usb: mixer: ignore -EINVAL in snd_usb_mixer_controls()

commit 83ea5d18d74f032a760fecde78c0210f66f7f70c upstream.

Creation of individual mixer controls may fail, but that shouldn't cause
the entire mixer creation to fail. Even worse, if the mixer creation
fails, that will error out the entire device probing.

All the functions called by parse_audio_unit() should return -EINVAL if
they find descriptors that are unsupported or believed to be malformed,
so we can safely handle this error code as a non-fatal condition in
snd_usb_mixer_controls().

That fixes a long standing bug which is commonly worked around by
adding quirks which make the driver ignore entire interfaces. Some of
them might now be unnecessary.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-and-tested-by: Rodolfo Thomazelli <pe.soberbo@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoALSA: snd-usb: mixer: propagate errors up the call chain
Daniel Mack [Tue, 19 Mar 2013 20:09:24 +0000 (21:09 +0100)]
ALSA: snd-usb: mixer: propagate errors up the call chain

commit 4d7b86c98e445b075c2c4c3757eb6d3d6efbe72e upstream.

In check_input_term() and parse_audio_feature_unit(), propagate the
error value that has been returned by a failing function instead of
-EINVAL. That helps cleaning up the error pathes in the mixer.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agox86-64: Fix the failure case in copy_user_handle_tail()
CQ Tang [Mon, 18 Mar 2013 15:02:21 +0000 (11:02 -0400)]
x86-64: Fix the failure case in copy_user_handle_tail()

commit 66db3feb486c01349f767b98ebb10b0c3d2d021b upstream.

The increment of "to" in copy_user_handle_tail() will have incremented
before a failure has been noted.  This causes us to skip a byte in the
failure case.

Only do the increment when assured there is no failure.

Signed-off-by: CQ Tang <cq.tang@intel.com>
Link: http://lkml.kernel.org/r/20130318150221.8439.993.stgit@phlsvslse11.ph.intel.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoUSB: xhci - fix bit definitions for IMAN register
Dmitry Torokhov [Mon, 25 Feb 2013 18:56:01 +0000 (10:56 -0800)]
USB: xhci - fix bit definitions for IMAN register

commit f8264340e694604863255cc0276491d17c402390 upstream.

According to XHCI specification (5.5.2.1) the IP is bit 0 and IE is bit 1
of IMAN register. Previously their definitions were reversed.

Even though there are no ill effects being observed from the swapped
definitions (because IMAN_IP is RW1C and in legacy PCI case we come in
with it already set to 1 so it was clearing itself even though we were
setting IMAN_IE instead of IMAN_IP), we should still correct the values.

This patch should be backported to kernels as old as 2.6.36, that
contain the commit 4e833c0b87a30798e67f06120cecebef6ee9644c "xhci: don't
re-enable IE constantly".

Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoALSA: hda/cirrus - Fix the digital beep registration
Takashi Iwai [Mon, 18 Mar 2013 10:00:44 +0000 (11:00 +0100)]
ALSA: hda/cirrus - Fix the digital beep registration

commit a86b1a2cd2f81f74e815e07f756edd7bc5b6f034 upstream.

The argument passed to snd_hda_attach_beep_device() is a widget NID
while spec->beep_amp holds the composed value for amp controls.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agodrm/radeon/benchmark: make sure bo blit copy exists before using it
Alex Deucher [Tue, 12 Mar 2013 16:53:13 +0000 (12:53 -0400)]
drm/radeon/benchmark: make sure bo blit copy exists before using it

commit fa8d387dc3f62062a6b4afbbb2a3438094fd8584 upstream.

Fixes a segfault on asics without a blit callback.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=62239

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[bwh: Backported to 3.2: s/copy\.blit/copy_blit/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agousb-storage: add unusual_devs entry for Samsung YP-Z3 mp3 player
Dmitry Artamonow [Sat, 9 Mar 2013 16:30:58 +0000 (20:30 +0400)]
usb-storage: add unusual_devs entry for Samsung YP-Z3 mp3 player

commit 29f86e66428ee083aec106cca1748dc63d98ce23 upstream.

Device stucks on filesystem writes, unless following quirk is passed:
  echo 04e8:5136:m > /sys/module/usb_storage/parameters/quirks

Add corresponding entry to unusual_devs.h

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoUSB: xhci: correctly enable interrupts
Hannes Reinecke [Mon, 4 Mar 2013 16:14:43 +0000 (17:14 +0100)]
USB: xhci: correctly enable interrupts

commit 00eed9c814cb8f281be6f0f5d8f45025dc0a97eb upstream.

xhci has its own interrupt enabling routine, which will try to
use MSI-X/MSI if present. So the usb core shouldn't try to enable
legacy interrupts; on some machines the xhci legacy IRQ setting
is invalid.

v3: Be careful to not break XHCI_BROKEN_MSI workaround (by trenn)

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Frederik Himpe <fhimpe@vub.ac.be>
Cc: David Haerdeman <david@hardeman.nu>
Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agotracing: Prevent buffer overwrite disabled for latency tracers
Steven Rostedt (Red Hat) [Thu, 14 Mar 2013 19:03:53 +0000 (15:03 -0400)]
tracing: Prevent buffer overwrite disabled for latency tracers

commit 613f04a0f51e6e68ac6fe571ab79da3c0a5eb4da upstream.

The latency tracers require the buffers to be in overwrite mode,
otherwise they get screwed up. Force the buffers to stay in overwrite
mode when latency tracers are enabled.

Added a flag_changed() method to the tracer structure to allow
the tracers to see what flags are being changed, and also be able
to prevent the change from happing.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[bwh: Backported to 3.2:
 - Adjust context
 - Drop some changes that are not needed because trace_set_options() is not
   separate from tracing_trace_options_write()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agotracing: Keep overwrite in sync between regular and snapshot buffers
Steven Rostedt (Red Hat) [Thu, 14 Mar 2013 18:20:54 +0000 (14:20 -0400)]
tracing: Keep overwrite in sync between regular and snapshot buffers

commit 80902822658aab18330569587cdb69ac1dfdcea8 upstream.

Changing the overwrite mode for the ring buffer via the trace
option only sets the normal buffer. But the snapshot buffer could
swap with it, and then the snapshot would be in non overwrite mode
and the normal buffer would be in overwrite mode, even though the
option flag states otherwise.

Keep the two buffers overwrite modes in sync.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agotracing: Protect tracer flags with trace_types_lock
Steven Rostedt (Red Hat) [Thu, 14 Mar 2013 17:50:56 +0000 (13:50 -0400)]
tracing: Protect tracer flags with trace_types_lock

commit 69d34da2984c95b33ea21518227e1f9470f11d95 upstream.

Seems that the tracer flags have never been protected from
synchronous writes. Luckily, admins don't usually modify the
tracing flags via two different tasks. But if scripts were to
be used to modify them, then they could get corrupted.

Move the trace_types_lock that protects against tracers changing
to also protect the flags being set.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[bwh: Backported to 3.2: also move failure return in
 tracing_trace_options_write() after unlocking]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agotracing: Fix free of probe entry by calling call_rcu_sched()
Steven Rostedt (Red Hat) [Wed, 13 Mar 2013 15:15:19 +0000 (11:15 -0400)]
tracing: Fix free of probe entry by calling call_rcu_sched()

commit 740466bc89ad8bd5afcc8de220f715f62b21e365 upstream.

Because function tracing is very invasive, and can even trace
calls to rcu_read_lock(), RCU access in function tracing is done
with preempt_disable_notrace(). This requires a synchronize_sched()
for updates and not a synchronize_rcu().

Function probes (traceon, traceoff, etc) must be freed after
a synchronize_sched() after its entry has been removed from the
hash. But call_rcu() is used. Fix this by using call_rcu_sched().

Also fix the usage to use hlist_del_rcu() instead of hlist_del().

Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agodrm/i915: bounds check execbuffer relocation count
Kees Cook [Tue, 12 Mar 2013 00:31:45 +0000 (17:31 -0700)]
drm/i915: bounds check execbuffer relocation count

commit 3118a4f652c7b12c752f3222af0447008f9b2368 upstream.

It is possible to wrap the counter used to allocate the buffer for
relocation copies. This could lead to heap writing overflows.

CVE-2013-0913

v3: collapse test, improve comment
v2: move check into validate_exec_list

Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Pinkie Pie
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agodrm/i915: restrict kernel address leak in debugfs
Kees Cook [Mon, 11 Mar 2013 19:25:19 +0000 (12:25 -0700)]
drm/i915: restrict kernel address leak in debugfs

commit 2563a4524febe8f4a98e717e02436d1aaf672aa2 upstream.

Masks kernel address info-leak in object dumps with the %pK suffix,
so they cannot be used to target kernel memory corruption attacks if
the kptr_restrict sysctl is set.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2: the rest of the format string is different]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agocifs: delay super block destruction until all cifsFileInfo objects are gone
Mateusz Guzik [Fri, 8 Mar 2013 15:30:03 +0000 (16:30 +0100)]
cifs: delay super block destruction until all cifsFileInfo objects are gone

commit 24261fc23db950951760d00c188ba63cc756b932 upstream.

cifsFileInfo objects hold references to dentries and it is possible that
these will still be around in workqueues when VFS decides to kill super
block during unmount.

This results in panics like this one:
BUG: Dentry ffff88001f5e76c0{i=66b4a,n=1M-2} still in use (1) [unmount of cifs cifs]
------------[ cut here ]------------
kernel BUG at fs/dcache.c:943!
[..]
Process umount (pid: 1781, threadinfo ffff88003d6e8000, task ffff880035eeaec0)
[..]
Call Trace:
 [<ffffffff811b44f3>] shrink_dcache_for_umount+0x33/0x60
 [<ffffffff8119f7fc>] generic_shutdown_super+0x2c/0xe0
 [<ffffffff8119f946>] kill_anon_super+0x16/0x30
 [<ffffffffa036623a>] cifs_kill_sb+0x1a/0x30 [cifs]
 [<ffffffff8119fcc7>] deactivate_locked_super+0x57/0x80
 [<ffffffff811a085e>] deactivate_super+0x4e/0x70
 [<ffffffff811bb417>] mntput_no_expire+0xd7/0x130
 [<ffffffff811bc30c>] sys_umount+0x9c/0x3c0
 [<ffffffff81657c19>] system_call_fastpath+0x16/0x1b

Fix this by making each cifsFileInfo object hold a reference to cifs
super block, which implicitly keeps VFS super block around as well.

Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reported-and-Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agotracing: Fix race in snapshot swapping
Steven Rostedt (Red Hat) [Tue, 12 Mar 2013 15:32:32 +0000 (11:32 -0400)]
tracing: Fix race in snapshot swapping

commit 2721e72dd10f71a3ba90f59781becf02638aa0d9 upstream.

Although the swap is wrapped with a spin_lock, the assignment
of the temp buffer used to swap is not within that lock.
It needs to be moved into that lock, otherwise two swaps
happening on two different CPUs, can end up using the wrong
temp buffer to assign in the swap.

Luckily, all current callers of the swap function appear to have
their own locks. But in case something is added that allows two
different callers to call the swap, then there's a chance that
this race can trigger and corrupt the buffers.

New code is coming soon that will allow for this race to trigger.

I've Cc'd stable, so this bug will not show up if someone backports
one of the changes that can trigger this bug.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoext4: use atomic64_t for the per-flexbg free_clusters count
Theodore Ts'o [Tue, 12 Mar 2013 03:39:59 +0000 (23:39 -0400)]
ext4: use atomic64_t for the per-flexbg free_clusters count

commit 90ba983f6889e65a3b506b30dc606aa9d1d46cd2 upstream.

A user who was using a 8TB+ file system and with a very large flexbg
size (> 65536) could cause the atomic_t used in the struct flex_groups
to overflow.  This was detected by PaX security patchset:

http://forums.grsecurity.net/viewtopic.php?f=3&t=3289&p=12551#p12551

This bug was introduced in commit 9f24e4208f7e, so it's been around
since 2.6.30.  :-(

Fix this by using an atomic64_t for struct orlav_stats's
free_clusters.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoext4: convert number of blocks to clusters properly
Lukas Czerner [Sat, 2 Mar 2013 22:18:58 +0000 (17:18 -0500)]
ext4: convert number of blocks to clusters properly

commit 810da240f221d64bf90020f25941b05b378186fe upstream.

We're using macro EXT4_B2C() to convert number of blocks to number of
clusters for bigalloc file systems.  However, we should be using
EXT4_NUM_B2C().

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
[bwh: Backported to 3.2:
 - Adjust context
 - Drop changes in ext4_setup_new_descs() and ext4_calculate_overhead()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agojbd2: fix use after free in jbd2_journal_dirty_metadata()
Jan Kara [Mon, 11 Mar 2013 17:24:56 +0000 (13:24 -0400)]
jbd2: fix use after free in jbd2_journal_dirty_metadata()

commit ad56edad089b56300fd13bb9eeb7d0424d978239 upstream.

jbd2_journal_dirty_metadata() didn't get a reference to journal_head it
was working with. This is OK in most of the cases since the journal head
should be attached to a transaction but in rare occasions when we are
journalling data, __ext4_journalled_writepage() can race with
jbd2_journal_invalidatepage() stripping buffers from a page and thus
journal head can be freed under hands of jbd2_journal_dirty_metadata().

Fix the problem by getting own journal head reference in
jbd2_journal_dirty_metadata() (and also in jbd2_journal_set_triggers()
which can possibly have the same issue).

Reported-by: Zheng Liu <gnehzuil.liu@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agoext4: fix the wrong number of the allocated blocks in ext4_split_extent()
Zheng Liu [Mon, 11 Mar 2013 01:20:23 +0000 (21:20 -0400)]
ext4: fix the wrong number of the allocated blocks in ext4_split_extent()

commit 3a2256702e47f68f921dfad41b1764d05c572329 upstream.

This commit fixes a wrong return value of the number of the allocated
blocks in ext4_split_extent.  When the length of blocks we want to
allocate is greater than the length of the current extent, we return a
wrong number.  Let's see what happens in the following case when we
call ext4_split_extent().

  map: [48, 72]
  ex:  [32, 64, u]

'ex' will be split into two parts:
  ex1: [32, 47, u]
  ex2: [48, 64, w]

'map->m_len' is returned from this function, and the value is 24.  But
the real length is 16.  So it should be fixed.

Meanwhile in this commit we use right length of the allocated blocks
when get_reserved_cluster_alloc in ext4_ext_handle_uninitialized_extents
is called.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agosfc: Only use TX push if a single descriptor is to be written
Ben Hutchings [Wed, 27 Feb 2013 16:50:38 +0000 (16:50 +0000)]
sfc: Only use TX push if a single descriptor is to be  written

[ Upstream commit fae8563b25f73dc584a07bcda7a82750ff4f7672 ]

Using TX push when notifying the NIC of multiple new descriptors in
the ring will very occasionally cause the TX DMA engine to re-use an
old descriptor.  This can result in a duplicated or partly duplicated
packet (new headers with old data), or an IOMMU page fault.  This does
not happen when the pushed descriptor is the only one written.

TX push also provides little latency benefit when a packet requires
more than one descriptor.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agosfc: Disable soft interrupt handling during efx_device_detach_sync()
Ben Hutchings [Tue, 5 Mar 2013 01:03:47 +0000 (01:03 +0000)]
sfc: Disable soft interrupt handling during  efx_device_detach_sync()

[ Upstream commit 35205b211c8d17a8a0b5e8926cb7c73e9a7ef1ad ]

efx_device_detach_sync() locks all TX queues before marking the device
detached and thus disabling further TX scheduling.  But it can still
be interrupted by TX completions which then result in TX scheduling in
soft interrupt context.  This will deadlock when it tries to acquire
a TX queue lock that efx_device_detach_sync() already acquired.

To avoid deadlock, we must use netif_tx_{,un}lock_bh().

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agosfc: Detach net device when stopping queues for reconfiguration
Ben Hutchings [Mon, 28 Jan 2013 19:01:06 +0000 (19:01 +0000)]
sfc: Detach net device when stopping queues for  reconfiguration

[ Upstream commit 29c69a4882641285a854d6d03ca5adbba68c0034 ]

We must only ever stop TX queues when they are full or the net device
is not 'ready' so far as the net core, and specifically the watchdog,
is concerned.  Otherwise, the watchdog may fire *immediately* if no
packets have been added to the queue in the last 5 seconds.

The device is ready if all the following are true:

(a) It has a qdisc
(b) It is marked present
(c) It is running
(d) The link is reported up

(a) and (c) are normally true, and must not be changed by a driver.
(d) is under our control, but fake link changes may disturb userland.
This leaves (b).  We already mark the device absent during reset
and self-test, but we need to do the same during MTU changes and ring
reallocation.  We don't need to do this when the device is brought
down because then (c) is already false.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
9 years agosfc: Fix efx_rx_buf_offset() in the presence of swiotlb
Ben Hutchings [Thu, 10 Jan 2013 23:51:54 +0000 (23:51 +0000)]
sfc: Fix efx_rx_buf_offset() in the presence of  swiotlb

[ Upstream commits 06e63c57acbb1df7c35ebe846ae416a8b88dfafa,
  b590ace09d51cd39744e0f7662c5e4a0d1b5d952 and
  c73e787a8db9117d59b5180baf83203a42ecadca ]

We assume that the mapping between DMA and virtual addresses is done
on whole pages, so we can find the page offset of an RX buffer using
the lower bits of the DMA address.  However, swiotlb maps in units of
2K, breaking this assumption.

Add an explicit page_offset field to struct efx_rx_buffer.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>