pandora-kernel.git
11 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Fri, 14 Jan 2011 01:30:20 +0000 (17:30 -0800)]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md: Fix removal of extra drives when converting RAID6 to RAID5
  md: range check slot number when manually adding a spare.
  md/raid5: handle manually-added spares in start_reshape.
  md: fix sync_completed reporting for very large drives (>2TB)
  md: allow suspend_lo and suspend_hi to decrease as well as increase.
  md: Don't let implementation detail of curr_resync leak out through sysfs.
  md: separate meta and data devs
  md-new-param-to_sync_page_io
  md-new-param-to-calc_dev_sboffset
  md: Be more careful about clearing flags bit in ->recovery
  md: md_stop_writes requires mddev_lock.
  md/raid5: use sysfs_notify_dirent_safe to avoid NULL pointer
  md: Ensure no IO request to get md device before it is properly initialised.
  md: Fix single printks with multiple KERN_<level>s
  md: fix regression resulting in delays in clearing bits in a bitmap
  md: fix regression with re-adding devices to arrays with no metadata

11 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Fri, 14 Jan 2011 01:29:53 +0000 (17:29 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] fix build error - arch/ia64/kernel/perfmon.c

11 years agoRevert "gpiolib: annotate gpio-intialization with __must_check"
Linus Torvalds [Fri, 14 Jan 2011 01:26:46 +0000 (17:26 -0800)]
Revert "gpiolib: annotate gpio-intialization with __must_check"

This reverts commit 0fdae42d361bbb431ca0ab0efed5126a94821177, which
wasn't really supposed to go in, and causes lots of annoying warnings.

Quoth Andrew:
  "Complete brainfart - I meant to drop that patch ages ago."

Quoth Greg:
  "Ick, yeah, that patch isn't ok to go in as-is, all of the callers
   need to be fixed up first, which is what I thought we had agreed on..."

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoecryptfs: fix broken build
Linus Torvalds [Fri, 14 Jan 2011 01:19:38 +0000 (17:19 -0800)]
ecryptfs: fix broken build

Stephen Rothwell reports that the vfs merge broke the build of ecryptfs.
The breakage comes from commit 66cb76666d69 ("sanitize ecryptfs
->mount()") which was obviously not even build tested. Tssk, tssk, Al.

This is the minimal build fixup for the situation, although I don't have
a filesystem to actually test it with.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years ago[IA64] fix build error - arch/ia64/kernel/perfmon.c
Tony Luck [Thu, 13 Jan 2011 22:49:56 +0000 (14:49 -0800)]
[IA64] fix build error - arch/ia64/kernel/perfmon.c

arch/ia64/kernel/perfmon.c:621: error: duplicate 'static'

Introduced by commit c74a1cbb3cac348f276fabc381758f5b0b4713b2

    pass default dentry_operations to mount_pseudo()

Signed-off-by: Tony Luck <tony.luck@intel.com>
11 years agomd: Fix removal of extra drives when converting RAID6 to RAID5
NeilBrown [Thu, 13 Jan 2011 22:14:34 +0000 (09:14 +1100)]
md: Fix removal of extra drives when converting RAID6 to RAID5

When a RAID6 is converted to a RAID5, the extra drive should
be discarded.  However it isn't due to a typo in a comparison.

This bug was introduced in commit e93f68a1fc6 in 2.6.35-rc4
and is suitable for any -stable since than.

As the extra drive is not removed, the 'degraded' counter is wrong and
so the RAID5 will not respond correctly to a subsequent failure.

Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
11 years agomd: range check slot number when manually adding a spare.
NeilBrown [Thu, 13 Jan 2011 22:14:34 +0000 (09:14 +1100)]
md: range check slot number when manually adding a spare.

When adding a spare to an active array, we should check the slot
number, but allow it to be larger than raid_disks if a reshape
is being prepared.

Apply the same test when adding a device to an
array-under-construction.  It already had most of the test in place,
but not quite all.

Signed-off-by: NeilBrown <neilb@suse.de>
11 years agomd/raid5: handle manually-added spares in start_reshape.
NeilBrown [Thu, 13 Jan 2011 22:14:34 +0000 (09:14 +1100)]
md/raid5: handle manually-added spares in start_reshape.

It is possible to manually add spares to specific slots before
starting a reshape.
raid5_start_reshape should recognised this possibility and include
it in the accounting.

Signed-off-by: NeilBrown <neilb@suse.de>
11 years agomd: fix sync_completed reporting for very large drives (>2TB)
Rémi Rérolle [Thu, 13 Jan 2011 22:14:34 +0000 (09:14 +1100)]
md: fix sync_completed reporting for very large drives (>2TB)

The values exported in the sync_completed file are unsigned long, which
overflows with very large drives, resulting in wrong values reported.

Since sync_completed uses sectors as unit, we'll start getting wrong
values with components larger than 2TB.

This patch simply replaces the use of unsigned long by unsigned long long.

Signed-off-by: Rémi Rérolle <rrerolle@lacie.com>
Signed-off-by: NeilBrown <neilb@suse.de>
11 years agomd: allow suspend_lo and suspend_hi to decrease as well as increase.
NeilBrown [Thu, 13 Jan 2011 22:14:34 +0000 (09:14 +1100)]
md: allow suspend_lo and suspend_hi to decrease as well as increase.

The sysfs attributes 'suspend_lo' and 'suspend_hi' describe a region
to which read/writes are suspended so that the under lying data can be
manipulated without user-space noticing.
Currently the window they describe can only move forwards along the
device.  However this is an unnecessary restriction which will cause
problems with planned developments.
So relax this restriction and allow these endpoints to move
arbitrarily.

Signed-off-by: NeilBrown <neilb@suse.de>
11 years agomd: Don't let implementation detail of curr_resync leak out through sysfs.
NeilBrown [Thu, 13 Jan 2011 22:14:34 +0000 (09:14 +1100)]
md: Don't let implementation detail of curr_resync leak out through sysfs.

mddev->curr_resync has artificial values of '1' and '2' which are used
by the code which ensures only one resync is happening at a time on
any given device.

These values are internal and should never be exposed to user-space
(except when translated appropriately as in the 'pending' status in
/proc/mdstat).

Unfortunately they are as ->curr_resync is assigned to
->curr_resync_completed and that value is directly visible through
sysfs.

So change the assignments to ->curr_resync_completed to get the same
valued from elsewhere in a form that doesn't have the magic '1' or '2'
values.

Signed-off-by: NeilBrown <neilb@suse.de>
11 years agomd: separate meta and data devs
Jonathan Brassow [Thu, 13 Jan 2011 22:14:34 +0000 (09:14 +1100)]
md: separate meta and data devs

Allow the metadata to be on a separate device from the
data.

This doesn't mean the data and metadata will by on separate
physical devices - it simply gives device-mapper and userspace
tools more flexibility.

Signed-off-by: NeilBrown <neilb@suse.de>
11 years agomd-new-param-to_sync_page_io
Jonathan Brassow [Thu, 13 Jan 2011 22:14:33 +0000 (09:14 +1100)]
md-new-param-to_sync_page_io

Add new parameter to 'sync_page_io'.

The new parameter allows us to distinguish between metadata and data
operations.  This becomes important later when we add the ability to
use separate devices for data and metadata.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
11 years agomd-new-param-to-calc_dev_sboffset
Jonathan Brassow [Thu, 13 Jan 2011 22:14:33 +0000 (09:14 +1100)]
md-new-param-to-calc_dev_sboffset

When we allow for separate devices for data and metadata
in a later patch, we will need to be able to calculate
the superblock offset based on more than the bdev.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
11 years agomd: Be more careful about clearing flags bit in ->recovery
NeilBrown [Thu, 13 Jan 2011 22:14:33 +0000 (09:14 +1100)]
md: Be more careful about clearing flags bit in ->recovery

Setting ->recovery to 0 is generally not a good idea as it could clear
bits that shouldn't be cleared.  In particular, MD_RECOVERY_FROZEN
should only be cleared on explicit request from user-space.

So when we need to clear things, just clear the bits that need
clearing.

As there are a few different places which reap a resync process - and
some do an incomplte job - factor out the code for doing the from
md_check_recovery and call that function instead of open coding part
of it.

Signed-off-by: NeilBrown <neilb@suse.de>
Reported-by: Jonathan Brassow <jbrassow@redhat.com>
11 years agomd: md_stop_writes requires mddev_lock.
NeilBrown [Thu, 13 Jan 2011 22:14:33 +0000 (09:14 +1100)]
md: md_stop_writes requires mddev_lock.

As md_stop_writes manipulates the sync_thread and calls md_update_sb,
it need to be called with mddev_lock held.

In all internal cases it is, but the symbol is exported for dm-raid to
call and in that case the lock won't be help.
Do make an exported version which takes the lock, and an internal
version which does not.

Signed-off-by: NeilBrown <neilb@suse.de>
11 years agomd/raid5: use sysfs_notify_dirent_safe to avoid NULL pointer
Jonathan Brassow [Thu, 13 Jan 2011 22:14:33 +0000 (09:14 +1100)]
md/raid5: use sysfs_notify_dirent_safe to avoid NULL pointer

With the module parameter 'start_dirty_degraded' set,
raid5_spare_active() previously called sysfs_notify_dirent() with a NULL
argument (rdev->sysfs_state) when a rebuild finished.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
11 years agomd: Ensure no IO request to get md device before it is properly initialised.
NeilBrown [Thu, 13 Jan 2011 22:14:33 +0000 (09:14 +1100)]
md: Ensure no IO request to get md device before it is properly initialised.

When an md device is in the process of coming on line it is possible
for an IO request (typically a partition table probe) to get through
before the array is fully initialised, which can cause unexpected
behaviour (e.g. a crash).

So explicitly record when the array is ready for IO and don't allow IO
through until then.

There is no possibility for a similar problem when the array is going
off-line as there must only be one 'open' at that time, and it is busy
off-lining the array and so cannot send IO requests.  So no memory
barrier is needed in md_stop()

This has been a bug since commit 409c57f3801 in 2.6.30 which
introduced md_make_request.  Before then, each personality would
register its own make_request_fn when it was ready.
This is suitable for any stable kernel from 2.6.30.y onwards.

Cc: <stable@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Reported-by: "Hawrylewicz Czarnowski, Przemyslaw" <przemyslaw.hawrylewicz.czarnowski@intel.com>
11 years agomd: Fix single printks with multiple KERN_<level>s
Joe Perches [Thu, 13 Jan 2011 22:14:33 +0000 (09:14 +1100)]
md: Fix single printks with multiple KERN_<level>s

Noticed-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: NeilBrown <neilb@suse.de>
11 years agomd: fix regression resulting in delays in clearing bits in a bitmap
NeilBrown [Thu, 13 Jan 2011 22:13:53 +0000 (09:13 +1100)]
md: fix regression resulting in delays in clearing bits in a bitmap

commit 589a594be1fb (2.6.37-rc4) fixed a problem were md_thread would
sometimes call the ->run function at a bad time.

If an error is detected during array start up after the md_thread has
been started, the md_thread is killed.  This resulted in the ->run
function being called once.  However the array may not be in a state
that it is safe to call ->run.

However the fix imposed meant that  ->run was not called on a timeout.
This means that when an array goes idle, bitmap bits do not get
cleared promptly.  While the array is busy the bits will still be
cleared when appropriate so this is not very serious.  There is no
risk to data.

Change the test so that we only avoid calling ->run when the thread
is being stopped.  This more explicitly addresses the problem situation.

This is suitable for 2.6.37-stable and any -stable kernel to which
589a594be1fb was applied.

Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt...
Linus Torvalds [Thu, 13 Jan 2011 20:06:58 +0000 (12:06 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/egtvedt/avr32-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/avr32-2.6:
  avr32: update default configuration files for Atmel boards
  avr32: Convert to clocksource_register_hz
  avr32: make architecture sys_clone prototype match asm-generic prototype
  avr32: use syscall prototypes from asm-generic instead of arch
  avr32: disable kprobes for all default configurations
  avr32: boards: setup: use IS_ERR() instead of NULL check

11 years agoNFS: Fix NFSv3 exclusive open semantics
Trond Myklebust [Thu, 13 Jan 2011 19:15:50 +0000 (14:15 -0500)]
NFS: Fix NFSv3 exclusive open semantics

Commit c0204fd2b8fe047b18b67e07e1bf2a03691240cd (NFS: Clean up
nfs4_proc_create()) broke NFSv3 exclusive open by removing the code
that passes the O_EXCL flag down to nfs3_proc_create(). This patch
reverts that offending hunk from the original commit.

Reported-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org [2.6.37]
Tested-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoavr32: update default configuration files for Atmel boards
Hans-Christian Egtvedt [Thu, 13 Jan 2011 11:18:32 +0000 (12:18 +0100)]
avr32: update default configuration files for Atmel boards

This patch adjusts some values to make the default configuration for Atmel
boards more similar, and adds missing values to enable required functions. Also
remove defined symbols for functions not in use.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
11 years agoavr32: Convert to clocksource_register_hz
John Stultz [Mon, 1 Nov 2010 20:12:27 +0000 (13:12 -0700)]
avr32: Convert to clocksource_register_hz

This converts the avr32 clocksource to use clocksource_register_hz.

This is untested, so any assistance in testing would be appreciated!

CC: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
11 years agoavr32: make architecture sys_clone prototype match asm-generic prototype
Hans-Christian Egtvedt [Thu, 9 Dec 2010 08:02:06 +0000 (09:02 +0100)]
avr32: make architecture sys_clone prototype match asm-generic prototype

This patch will fix the arguments to the architecture sys_clone() function to
match the asm-generic/syscalls.h prototype. In the same go remove the
architecture specific prototype for the same function.

The sys_clone() function is only called from assembly, hence the argument types
were not having any affect.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
11 years agoavr32: use syscall prototypes from asm-generic instead of arch
Hans-Christian Egtvedt [Wed, 8 Dec 2010 23:19:33 +0000 (00:19 +0100)]
avr32: use syscall prototypes from asm-generic instead of arch

This patch removes the redundant syscalls prototypes in the architecture
specific syscalls.h header file. These were identical with the ones in
asm-generic/syscalls.h.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Reported-by: Peter Huewe <PeterHuewe@gmx.de>
Reported-by: Sven Schnelle <svens@stackframe.org>
Cc: stable <stable@kernel.org>
11 years agoavr32: disable kprobes for all default configurations
Hans-Christian Egtvedt [Thu, 9 Dec 2010 07:54:55 +0000 (08:54 +0100)]
avr32: disable kprobes for all default configurations

This patch will disable kprobes for all the default AVR32 board configurations.
This works around a regression in kprobes which seems to be related to AVR32 is
now lacking the struct kprobe_ctlblk.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
11 years agoavr32: boards: setup: use IS_ERR() instead of NULL check
Vasiliy Kulikov [Fri, 26 Nov 2010 17:06:12 +0000 (20:06 +0300)]
avr32: boards: setup: use IS_ERR() instead of NULL check

clk_get() returns ERR_PTR() on error, not NULL.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
11 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Thu, 13 Jan 2011 19:02:55 +0000 (11:02 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix format warning in arch/ia64/kernel/acpi.c

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Thu, 13 Jan 2011 19:02:05 +0000 (11:02 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: ohci: fix compilation on arches without PAGE_KERNEL_RO

11 years agoMerge branch 'for-2.6.38/drivers' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Thu, 13 Jan 2011 18:50:24 +0000 (10:50 -0800)]
Merge branch 'for-2.6.38/drivers' of git://git.kernel.dk/linux-2.6-block

* 'for-2.6.38/drivers' of git://git.kernel.dk/linux-2.6-block:
  cciss: reinstate proper FIFO order of command queue list
  floppy: replace NO_GEOM macro with a function

11 years agoMerge branch 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Thu, 13 Jan 2011 18:45:01 +0000 (10:45 -0800)]
Merge branch 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block

* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
  block: ensure that completion error gets properly traced
  blktrace: add missing probe argument to block_bio_complete
  block cfq: don't use atomic_t for cfq_group
  block cfq: don't use atomic_t for cfq_queue
  block: trace event block fix unassigned field
  block: add internal hd part table references
  block: fix accounting bug on cross partition merges
  kref: add kref_test_and_get
  bio-integrity: mark kintegrityd_wq highpri and CPU intensive
  block: make kblockd_workqueue smarter
  Revert "sd: implement sd_check_events()"
  block: Clean up exit_io_context() source code.
  Fix compile warnings due to missing removal of a 'ret' variable
  fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
  block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
  cfq-iosched: don't check cfqg in choose_service_tree()
  fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
  cdrom: export cdrom_check_events()
  sd: implement sd_check_events()
  sr: implement sr_check_events()
  ...

11 years agoMerge branch 'for-linus/i2c-2638' of git://git.fluff.org/bjdooks/linux
Linus Torvalds [Thu, 13 Jan 2011 18:40:57 +0000 (10:40 -0800)]
Merge branch 'for-linus/i2c-2638' of git://git.fluff.org/bjdooks/linux

* 'for-linus/i2c-2638' of git://git.fluff.org/bjdooks/linux:
  i2c-bfin-twi: move setup to the earlier subsys initcall
  i2c-bfin-twi: handle faulty slave devices better
  i2c-mv64xxx: send repeated START between messages in xfer
  i2c-nomadik: fix regression on adapter name
  i2c-omap: Set latency requirements only once for several messages
  i2c-eg20t: add driver for Intel EG20T
  i2c-ocores: add some device tree documentation
  i2c-ocores: Use devres for resource allocation
  i2c-ocores: Adapt for device tree
  i2c-iop3xx: add iomem annotation

11 years agoMerge branch 'rmobile-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal...
Linus Torvalds [Thu, 13 Jan 2011 18:40:00 +0000 (10:40 -0800)]
Merge branch 'rmobile-latest' of git://git./linux/kernel/git/lethal/sh-2.6

* 'rmobile-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  ARM: mach-shmobile: Kill off unused !gpio_is_valid() case
  ARM: mach-shmobile: sh7372 Enable SDIO IRQs for Mackerel
  ARM: mach-shmobile: sh7377 Enable SDIO IRQs
  ARM: mach-shmobile: sh7367 Enable SDIO IRQs
  ARM: mach-shmobile: sh7372 Enable SDIO IRQs
  ARM: mach-shmobile: mackerel: Add touchscreen ST1232 support
  ARM: mach-shmobile: ap4eb: SCIF port for earlyprintk when using zboot
  ARM: mach-shmobile: mackerel: SCIF port for earlyprintk when using zboot
  ARM: mach-shmobile: mackerel: Add support get_cd in CN23

11 years agoMerge branch 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal...
Linus Torvalds [Thu, 13 Jan 2011 18:39:38 +0000 (10:39 -0800)]
Merge branch 'sh-latest' of git://git./linux/kernel/git/lethal/sh-2.6

* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (31 commits)
  sh: Add support for AP-SH4AD-0A board.
  sh: Add support for AP-SH4A-3A board.
  sh: Add a new mach type for alpha project boards.
  serial: sh-sci: build fixes.
  sh: sh7372 SH4AL-DSP probe support
  sh: sh7366 Enable SDIO IRQs
  sh: sh7343 Enable SDIO IRQs
  sh: mach-ecovec24: enable runtime PM for SDHI
  sh: sh7723 / ap325rxa enable SDIO IRQs
  sh: sh7722 Enable SDIO IRQs
  sh: sh7724 Enable SDIO IRQs
  sh: Fix up legacy PTEA space attribute mapping.
  sh: Stub out legacy PCC pgprot encoding for X2 TLBs.
  sh: constify prefetch pointers.
  sh: Add a machvec callback for early memblock reservations.
  sh: update sh7757lcr_defconfig
  sh: add PVR probing for SH7757 3rd cut
  sh: Use device_initcall() instead of __initcall()
  sh: intc - convert board specific landisk code
  sh: Move init_landisk_IRQ to header file
  ...

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6
Linus Torvalds [Thu, 13 Jan 2011 18:39:14 +0000 (10:39 -0800)]
Merge git://git./linux/kernel/git/lethal/fbdev-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: (29 commits)
  video: move SH_MIPI_DSI/SH_LCD_MIPI_DSI to the top of menu
  fbdev: Implement simple blanking in pseudocolor modes for vt8500lcdfb
  video: imx: Update the manufacturer's name
  nuc900fb: don't treat NULL clk as an error
  s3c2410fb: don't treat NULL clk as an error
  video: tidy up modedb formatting.
  video: matroxfb: Correct video option in comments and kernel config help.
  fbdev: sh_mobile_hdmi: simplify pointer handling
  fbdev: sh_mobile_hdmi: framebuffer notifiers have to be registered
  fbdev: sh_mobile_hdmi: add command line option to use the preferred EDID mode
  OMAP: DSS2: Introduce omap_channel as an omap_dss_device parameter, add new overlay manager.
  OMAP: DSS2: Use dss_features to handle DISPC bits removed on OMAP4
  OMAP: DSS2: LCD2 Channel Changes for DISPC
  OMAP: DSS2: Change remaining DISPC functions for new omap_channel argument
  OMAP: DSS2: Introduce omap_channel argument to DISPC functions used by interface drivers
  OMAP: DSS2: Represent DISPC register defines with channel as parameter
  OMAP: DSS2: Add dss_features for omap4 and overlay manager related features
  OMAP: DSS2: Clean up DISPC color mode validation checks
  OMAP: DSS2: Add back authors of panel-generic.c based drivers
  OMAP: DSS2: remove generic DPI panel driver duplicated panel drivers
  ...

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Thu, 13 Jan 2011 18:32:54 +0000 (10:32 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (348 commits)
  ALSA: hda - Fix NULL-derefence with a single mic in STAC auto-mic detection
  ALSA: hda - Add missing NID 0x19 fixup for Sony VAIO
  ALSA: hda - Fix ALC275 enable hardware EQ for SONY VAIO
  ALSA: oxygen: fix Xonar DG input
  ALSA: hda - Fix EAPD on Lenovo NB ALC269 to low
  ALSA: hda - Fix missing EAPD for Acer 4930G
  ALSA: hda: Disable 4/6 channels on some NVIDIA GPUs.
  ALSA: hda - Add static_hdmi_pcm option to HDMI codec parser
  ALSA: hda - Don't refer ELD when unplugged
  ASoC: tpa6130a2: Fix compiler warning
  ASoC: tlv320dac33: Add DAPM selection for LOM invert
  ASoC: DMIC codec: Adding a generic DMIC codec
  ALSA: snd-usb-us122l: Fix missing NULL checks
  ALSA: snd-usb-us122l: Fix MIDI output
  ASoC: soc-cache: Fix invalid memory access during snd_soc_lzo_cache_sync()
  ASoC: Fix section mismatch in wm8995.c
  ALSA: oxygen: add S/PDIF source selection for Claro cards
  ALSA: oxygen: fix CD/MIDI for X-Meridian (2G)
  ASoC: fix migor audio build
  ALSA: include delay.h for msleep in Xonar DG support
  ...

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Thu, 13 Jan 2011 18:27:28 +0000 (10:27 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (41 commits)
  fs: add documentation on fallocate hole punching
  Gfs2: fail if we try to use hole punch
  Btrfs: fail if we try to use hole punch
  Ext4: fail if we try to use hole punch
  Ocfs2: handle hole punching via fallocate properly
  XFS: handle hole punching via fallocate properly
  fs: add hole punching to fallocate
  vfs: pass struct file to do_truncate on O_TRUNC opens (try #2)
  fix signedness mess in rw_verify_area() on 64bit architectures
  fs: fix kernel-doc for dcache::prepend_path
  fs: fix kernel-doc for dcache::d_validate
  sanitize ecryptfs ->mount()
  switch afs
  move internal-only parts of ncpfs headers to fs/ncpfs
  switch ncpfs
  switch 9p
  pass default dentry_operations to mount_pseudo()
  switch hostfs
  switch affs
  switch configfs
  ...

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Thu, 13 Jan 2011 18:25:58 +0000 (10:25 -0800)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (46 commits)
  hwrng: via_rng - Fix memory scribbling on some CPUs
  crypto: padlock - Move padlock.h into include/crypto
  hwrng: via_rng - Fix asm constraints
  crypto: n2 - use __devexit not __exit in n2_unregister_algs
  crypto: mark crypto workqueues CPU_INTENSIVE
  crypto: mv_cesa - dont return PTR_ERR() of wrong pointer
  crypto: ripemd - Set module author and update email address
  crypto: omap-sham - backlog handling fix
  crypto: gf128mul - Remove experimental tag
  crypto: af_alg - fix af_alg memory_allocated data type
  crypto: aesni-intel - Fixed build with binutils 2.16
  crypto: af_alg - Make sure sk_security is initialized on accept()ed sockets
  net: Add missing lockdep class names for af_alg
  include: Install linux/if_alg.h for user-space crypto API
  crypto: omap-aes - checkpatch --file warning fixes
  crypto: omap-aes - initialize aes module once per request
  crypto: omap-aes - unnecessary code removed
  crypto: omap-aes - error handling implementation improved
  crypto: omap-aes - redundant locking is removed
  crypto: omap-aes - DMA initialization fixes for OMAP off mode
  ...

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Thu, 13 Jan 2011 18:25:24 +0000 (10:25 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: fix cleanup when trying to mount inexistent image
  net/ceph: make ceph_msgr_wq non-reentrant
  ceph: fsc->*_wq's aren't used in memory reclaim path
  ceph: Always free allocated memory in osdmap_decode()
  ceph: Makefile: Remove unnessary code
  ceph: associate requests with opening sessions
  ceph: drop redundant r_mds field
  ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS
  ceph: add dir_layout to inode

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Thu, 13 Jan 2011 18:24:52 +0000 (10:24 -0800)]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: Add MCF548x watchdog driver.
  watchdog: add driver for the Atheros AR71XX/AR724X/AR913X SoCs
  watchdog: Add TCO support for nVidia chipsets
  watchdog: Add support for sp5100 chipset TCO
  watchdog: f71808e_wdt: add F71862FG, F71869 to Kconfig
  watchdog: iTCO_wdt: TCO Watchdog patch for Intel DH89xxCC PCH
  watchdog: iTCO_wdt: TCO Watchdog patch for Intel NM10 DeviceIDs
  watchdog: ks8695_wdt: include mach/hardware.h instead of mach/timex.h.
  watchdog: Propagate Book E WDT period changes to all cores
  watchdog: add CONFIG_WATCHDOG_NOWAYOUT support to PowerPC Book-E watchdog driver
  watchdog: alim7101_wdt: fix compiler warning on alim7101_pci_tbl
  watchdog: alim1535_wdt: fix compiler warning on ali_pci_tbl
  watchdog: Fix reboot on W83627ehf chipset.
  watchdog: Add watchdog support for W83627DHG chip
  watchdog: f71808e_wdt: Add Fintek F71869 watchdog
  watchdog: add f71862fg support
  watchdog: clean-up f71808e_wdt.c

11 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelv...
Linus Torvalds [Thu, 13 Jan 2011 18:24:29 +0000 (10:24 -0800)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (dme1737) Minor cleanups
  hwmon: (dme1737) Add support for in7 for SCH5127
  hwmon: (emc1403) Add EMC1423 support
  hwmon: (w83627hf) Document W83627THF voltage pin mapping
  hwmon: (w83793) Drop useless mutex
  hwmon: (fschmd) Drop useless mutex
  hwmon: (w83781d) Use pr_fmt and pr_<level>
  hwmon: (pc87427) Use pr_fmt and pr_<level>
  hwmon: (pc87360) Use pr_fmt and pr_<level>
  hwmon: (lm78) Use pr_fmt and pr_<level>
  hwmon: (it87) Use pr_fmt and pr_<level>
  hwmon: Schedule the removal of the old intrusion detection interfaces
  hwmon: (w83793) Implement the standard intrusion detection interface
  hwmon: (w83792d) Implement the standard intrusion detection interface
  hwmon: (adm9240) Implement the standard intrusion detection interface
  hwmon: (via686a) Initialize fan_div values
  hwmon: (w83795) Silent false warning from gcc
  hwmon: (ads7828) Update email contact details

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
Linus Torvalds [Thu, 13 Jan 2011 18:24:07 +0000 (10:24 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (45 commits)
  regulator: missing index in PTR_ERR() in isl6271a_probe()
  regulator: Assign return value of mc13xxx_reg_rmw to ret
  regulator: Add initial per-regulator debugfs support
  regulator: Make regulator_has_full_constraints a bool
  regulator: Clean up logging a bit
  regulator: Optimise out noop voltage changes
  regulator: Add API to re-apply voltage to hardware
  regulator: Staticise non-exported functions in mc13892
  regulator: Only notify voltage changes when they succeed
  regulator: Provide a selector based set_voltage_sel() operation
  regulator: Factor out voltage set operation into a separate function
  regulator: Convert WM8994 to use get_voltage_sel()
  regulator: Convert WM835x to use get_voltage_sel()
  regulator: Allow modular build of mc13xxx-core
  regulator: support PMIC mc13892
  make mc13783 regulator code generic
  Change the register name definitions for mc13783
  mach-ux500: Updated and connected ab8500 regulator board configuration
  regulators: Removed macros for initialization of ab8500 regulators
  regulators: Added verbose debug messages to ab8500 regulators
  ...

11 years agoMerge branch 'x86-olpc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 13 Jan 2011 18:15:12 +0000 (10:15 -0800)]
Merge branch 'x86-olpc-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-olpc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, olpc: Speed up device tree creation during boot
  x86, olpc: Add OLPC device-tree support
  x86, of: Define irq functions to allow drivers/of/* to build on x86

11 years agoMerge branch 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Thu, 13 Jan 2011 18:14:24 +0000 (10:14 -0800)]
Merge branch 'kvm-updates/2.6.38' of git://git./virt/kvm/kvm

* 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (142 commits)
  KVM: Initialize fpu state in preemptible context
  KVM: VMX: when entering real mode align segment base to 16 bytes
  KVM: MMU: handle 'map_writable' in set_spte() function
  KVM: MMU: audit: allow audit more guests at the same time
  KVM: Fetch guest cr3 from hardware on demand
  KVM: Replace reads of vcpu->arch.cr3 by an accessor
  KVM: MMU: only write protect mappings at pagetable level
  KVM: VMX: Correct asm constraint in vmcs_load()/vmcs_clear()
  KVM: MMU: Initialize base_role for tdp mmus
  KVM: VMX: Optimize atomic EFER load
  KVM: VMX: Add definitions for more vm entry/exit control bits
  KVM: SVM: copy instruction bytes from VMCB
  KVM: SVM: implement enhanced INVLPG intercept
  KVM: SVM: enhance mov DR intercept handler
  KVM: SVM: enhance MOV CR intercept handler
  KVM: SVM: add new SVM feature bit names
  KVM: cleanup emulate_instruction
  KVM: move complete_insn_gp() into x86.c
  KVM: x86: fix CR8 handling
  KVM guest: Fix kvm clock initialization when it's configured out
  ...

11 years agoMerge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Linus Torvalds [Thu, 13 Jan 2011 18:05:56 +0000 (10:05 -0800)]
Merge branch 'for-next' of git://git./linux/kernel/git/jikos/trivial

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Thu, 13 Jan 2011 17:58:38 +0000 (09:58 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hid-multitouch: minor fixes based on additional review
  HID: Switch turbox/mosart touchscreen to hid-mosart
  HID: add Add Cando touch screen 10.1-inch product id
  HID: hid-mulitouch: add support for the 'Sensing Win7-TwoFinger'
  HID: hid-multitouch: add support for Cypress TrueTouch panels
  HID: hid-multitouch: support for PixCir-based panels
  HID: set HID_MAX_FIELD at 128
  HID: add feature_mapping callback

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Thu, 13 Jan 2011 17:58:14 +0000 (09:58 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: add SW_ROTATE_LOCK switch type
  Input: fix force feedback capability query example
  Input: wacom_w8001 - add single-touch support
  Input: add Austria Microsystem AS5011 joystick driver
  Input: remove aaed2000 keyboard driver
  Input: i8042 - introduce 'notimeout' blacklist for Dell Vostro V13
  Input: cy8ctmg110_ts - Convert to dev_pm_ops
  Input: migor_ts - convert to dev_pm_ops
  Input: mcs5000_ts - convert to dev_pm_ops
  Input: eeti_ts - convert to dev_pm_ops
  Input: ad7879 - convert I2C to dev_pm_ops

11 years agodecompressors: remove unused constant from inflate.h
Lasse Collin [Thu, 13 Jan 2011 01:01:26 +0000 (17:01 -0800)]
decompressors: remove unused constant from inflate.h

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodecompressors: check input size in decompress_inflate.c
Lasse Collin [Thu, 13 Jan 2011 01:01:25 +0000 (17:01 -0800)]
decompressors: check input size in decompress_inflate.c

Check for end of the input buffer when skipping over the filename field in
the .gz file header.

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agox86: support XZ-compressed kernel
Lasse Collin [Thu, 13 Jan 2011 01:01:24 +0000 (17:01 -0800)]
x86: support XZ-compressed kernel

This integrates the XZ decompression code to the x86 pre-boot code.

mkpiggy.c is updated to reserve about 32 KiB more buffer safety margin for
kernel decompression.  It is done unconditionally for all decompressors to
keep the code simpler.

The XZ decompressor needs around 30 KiB of heap, so the heap size is
increased to 32 KiB on both x86-32 and x86-64.

Documentation/x86/boot.txt is updated to list the XZ magic number.

With the x86 BCJ filter in XZ, XZ-compressed x86 kernel tends to be a few
percent smaller than the equivalent LZMA-compressed kernel.

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodecompressors: add boot-time XZ support
Lasse Collin [Thu, 13 Jan 2011 01:01:23 +0000 (17:01 -0800)]
decompressors: add boot-time XZ support

This implements the API defined in <linux/decompress/generic.h> which is
used for kernel, initramfs, and initrd decompression.  This patch together
with the first patch is enough for XZ-compressed initramfs and initrd;
XZ-compressed kernel will need arch-specific changes.

The buffering requirements described in decompress_unxz.c are stricter
than with gzip, so the relevant changes should be done to the
arch-specific code when adding support for XZ-compressed kernel.
Similarly, the heap size in arch-specific pre-boot code may need to be
increased (30 KiB is enough).

The XZ decompressor needs memmove(), memeq() (memcmp() == 0), and
memzero() (memset(ptr, 0, size)), which aren't available in all
arch-specific pre-boot environments.  I'm including simple versions in
decompress_unxz.c, but a cleaner solution would naturally be nicer.

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodecompressors: add XZ decompressor module
Lasse Collin [Thu, 13 Jan 2011 01:01:22 +0000 (17:01 -0800)]
decompressors: add XZ decompressor module

In userspace, the .lzma format has become mostly a legacy file format that
got superseded by the .xz format.  Similarly, LZMA Utils was superseded by
XZ Utils.

These patches add support for XZ decompression into the kernel.  Most of
the code is as is from XZ Embedded <http://tukaani.org/xz/embedded.html>.
It was written for the Linux kernel but is usable in other projects too.

Advantages of XZ over the current LZMA code in the kernel:
  - Nice API that can be used by other kernel modules; it's
    not limited to kernel, initramfs, and initrd decompression.
  - Integrity check support (CRC32)
  - BCJ filters improve compression of executable code on
    certain architectures. These together with LZMA2 can
    produce a few percent smaller kernel or Squashfs images
    than plain LZMA without making the decompression slower.

This patch: Add the main decompression code (xz_dec), testing module
(xz_dec_test), wrapper script (xz_wrap.sh) for the xz command line tool,
and documentation.  The xz_dec module is enough to have a usable XZ
decompressor e.g.  for Squashfs.

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoDecompressors: fix callback-to-callback mode in decompress_unlzo.c
Lasse Collin [Thu, 13 Jan 2011 01:01:21 +0000 (17:01 -0800)]
Decompressors: fix callback-to-callback mode in decompress_unlzo.c

Callback-to-callback decompression mode is used for initrd (not
initramfs).  The LZO wrapper is broken for this use case for two reasons:

  - The argument validation is needlessly too strict by
    requiring that "posp" is non-NULL when "fill" is non-NULL.

  - The buffer handling code didn't work at all for this
    use case.

I tested with LZO-compressed kernel, initramfs, initrd, and corrupt
(truncated) initramfs and initrd images.

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoDecompressors: check input size in decompress_unlzo.c
Lasse Collin [Thu, 13 Jan 2011 01:01:21 +0000 (17:01 -0800)]
Decompressors: check input size in decompress_unlzo.c

The code assumes that the input is valid and not truncated.  Add checks to
avoid reading past the end of the input buffer.  Change the type of "skip"
from u8 to int to fix a possible integer overflow.

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoDecompressors: check for write errors in decompress_unlzo.c
Lasse Collin [Thu, 13 Jan 2011 01:01:20 +0000 (17:01 -0800)]
Decompressors: check for write errors in decompress_unlzo.c

The return value of flush() is not checked in unlzo().  This means that
the decompressor won't stop even if the caller doesn't want more data.
This can happen e.g.  with a corrupt LZO-compressed initramfs image.

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoDecompressors: validate match distance in decompress_unlzma.c
Lasse Collin [Thu, 13 Jan 2011 01:01:19 +0000 (17:01 -0800)]
Decompressors: validate match distance in decompress_unlzma.c

Validate the newly decoded distance (rep0) in process_bit1().  This is to
detect corrupt LZMA data quickly.  The old code can run for long time
producing garbage until it hits the end of the input.

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoDecompressors: check for write errors in decompress_unlzma.c
Lasse Collin [Thu, 13 Jan 2011 01:01:18 +0000 (17:01 -0800)]
Decompressors: check for write errors in decompress_unlzma.c

The return value of wr->flush() is not checked in write_byte().  This
means that the decompressor won't stop even if the caller doesn't want
more data.  This can happen e.g.  with corrupt LZMA-compressed initramfs.
Returning the error quickly allows the user to see the error message
quicker.

There is a similar missing check for wr.flush() near the end of unlzma().

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoDecompressors: check for read errors in decompress_unlzma.c
Lasse Collin [Thu, 13 Jan 2011 01:01:17 +0000 (17:01 -0800)]
Decompressors: check for read errors in decompress_unlzma.c

Return value of rc->fill() is checked in rc_read() and error() is called
when needed, but then the code continues as if nothing had happened.

rc_read() is a void function and it's on the top of performance critical
call stacks, so propagating the error code via return values doesn't sound
like the best fix.  It seems better to check rc->buffer_size (which holds
the return value of rc->fill()) in the main loop.  It does nothing bad
that the code runs a little with unknown data after a failed rc->fill().

This fixes an infinite loop in initramfs decompression if the
LZMA-compressed initramfs image is corrupt.

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoDecompressors: fix header validation in decompress_unlzma.c
Lasse Collin [Thu, 13 Jan 2011 01:01:17 +0000 (17:01 -0800)]
Decompressors: fix header validation in decompress_unlzma.c

Validation of header.pos calls error() but doesn't make the function
return to indicate an error to the caller.  Instead the decoding is
attempted with invalid header.pos.  This fixes it.

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoDecompressors: remove unused function from lib/decompress_unlzma.c
Lasse Collin [Thu, 13 Jan 2011 01:01:16 +0000 (17:01 -0800)]
Decompressors: remove unused function from lib/decompress_unlzma.c

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoDecompressors: include <linux/slab.h> in <linux/decompress/mm.h>
Lasse Collin [Thu, 13 Jan 2011 01:01:15 +0000 (17:01 -0800)]
Decompressors: include <linux/slab.h> in <linux/decompress/mm.h>

Currently users of mm.h need to include <linux/slab.h> to use the macros
malloc() and free() provided by mm.h.  This fixes it.

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoDecompressors: get rid of set_error_fn() macro
Lasse Collin [Thu, 13 Jan 2011 01:01:14 +0000 (17:01 -0800)]
Decompressors: get rid of set_error_fn() macro

set_error_fn() has become a useless complication after c1e7c3ae59
("bzip2/lzma/gzip: pre-boot malloc doesn't return NULL on failure") fixed
the use of error() in malloc().  Only decompress_unlzma.c had some use for
it and that was easy to change too.

This also gets rid of the static function pointer "error", which
should have been marked as __initdata.

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoDecompressors: add missing INIT (i.e. __init)
Lasse Collin [Thu, 13 Jan 2011 01:01:13 +0000 (17:01 -0800)]
Decompressors: add missing INIT (i.e. __init)

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoromfs: have romfs_fs.h pull in necessary headers
Mike Frysinger [Thu, 13 Jan 2011 01:01:12 +0000 (17:01 -0800)]
romfs: have romfs_fs.h pull in necessary headers

This header uses things like __be32, so pull in linux/types.h.

Further, it uses BLOCK_SIZE, so pull in linux/fs.h.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoramoops: fix types, remove typecasts
Andrew Morton [Thu, 13 Jan 2011 01:01:11 +0000 (17:01 -0800)]
ramoops: fix types, remove typecasts

Cc: Ahmed S. Darwish <darwish.07@gmail.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agocramfs: generate unique inode number for better inode cache usage
Stefani Seibold [Thu, 13 Jan 2011 01:01:10 +0000 (17:01 -0800)]
cramfs: generate unique inode number for better inode cache usage

Generate a unique inode numbers for any entries in the cram file system.
For files which did not contain data's (device nodes, fifos and sockets)
the offset of the directory entry inside the cramfs plus 1 will be used as
inode number.

The + 1 for the inode will it make possible to distinguish between a file
which contains no data and files which has data, the later one has a inode
value where the lower two bits are always 0.

It also reimplements the behavior to set the size and the number of block
to 0 for special file, which is the right value for empty files, devices,
fifos and sockets

As a little benefit it will be also more compatible which older mkcramfs,
because it will never use the cramfs_inode->offset for creating a inode
number for special files.

[akpm@linux-foundation.org: trivial comment fix]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agocramfs: hide function prototypes behind __KERNEL__ macro
Alexander Shishkin [Thu, 13 Jan 2011 01:01:09 +0000 (17:01 -0800)]
cramfs: hide function prototypes behind __KERNEL__ macro

Currently, 3 kernel function prototypes are present in a header
file exported to userland. This patch fixes it.

Signed-off-by: Alexander Shishkin <virtuoso@slind.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoaio: remove unused aio_run_iocbs()
Jeff Moyer [Thu, 13 Jan 2011 01:01:08 +0000 (17:01 -0800)]
aio: remove unused aio_run_iocbs()

aio_run_iocbs() is not used at all, so get rid of it.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoaio: remove unnecessary check
Namhyung Kim [Thu, 13 Jan 2011 01:01:08 +0000 (17:01 -0800)]
aio: remove unnecessary check

'nr >= min_nr >= 0' always satisfies 'nr >= 0' so the check is unnecesary.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoVMware balloon: stop locking pages when hypervisor tells us enough
Dmitry Torokhov [Thu, 13 Jan 2011 01:01:07 +0000 (17:01 -0800)]
VMware balloon: stop locking pages when hypervisor tells us enough

When hypervisor decides to decrease target balloon size while the balloon
driver tries to lock pages hypervisor may respond with
VMW_BALLOON_PPN_NOTNEEDED.  Use this data and immediately stop reserving
pages and wait for the next update cycle to fetch new target instead of
continuing trying to lock pages until size of refused list grows above
VMW_BALLOON_MAX_REFUSED (16) pages.

As a result the driver stops bothering the hypervisor with its attempts to
lock more pages that are not needed anymore.  Most likely next order from
hypervisor will be to reduce ballon size anyway.

It is a small optimization.

Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agow1: DS2423 counter driver and documentation
Mika Laitio [Thu, 13 Jan 2011 01:01:06 +0000 (17:01 -0800)]
w1: DS2423 counter driver and documentation

This is a 1-wire/w1 DS2423 slave driver for reading the values from all 4
counters available DS2423 devices by using standard w1_slave file.  In
ds2423 the counters are tied to ram pages 12-15 in and each of those
ram-pages.  Each of these counter values (and asoociated ram page values)
are represented as a own line in w1_slave file.  Driver has been tested on
mips and x86.

usage example:
cat /sys/bus/w1/devices/1d-00000009b964/w1_slave

00 02 00 00 00 00 00 00 00 6d 38 00 ff ff 00 00 fe ff 00 00 ff ff 00 00 ff
ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=2
00 02 00 00 00 00 00 00 00 e0 1f 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff
ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=2
00 5a 0e 5f 18 00 00 00 00 0b 28 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff
ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=408882778
00 05 00 00 00 00 00 00 00 8d 39 ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff crc=YES c=5

Patch includes also the documentation.

[randy.dunlap@oracle.com: fix ds2423 build, needs to select CRC16]
Signed-off-by: Mika Laitio <lamikr@pilppa.org>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomemstick: factor out transfer initiating functionality in mspro_block.c
Alex Dubov [Thu, 13 Jan 2011 01:01:05 +0000 (17:01 -0800)]
memstick: factor out transfer initiating functionality in mspro_block.c

Apart from currently used standard memstick data transfer method, Sony
introduced several newer ones, to uncover full bandwidth/capacity of its
Pro, HG and XC media formats. This patch lays a foundation to enable
those methods as made possible by host/media capabilities.

As a side effect of this patch, mspro_block_read_attributes became more
streamlined and readable.

[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Reported-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomemstick: remove mspro_block_mutex
Alex Dubov [Thu, 13 Jan 2011 01:01:04 +0000 (17:01 -0800)]
memstick: remove mspro_block_mutex

mspro_block_mutex is identical in scope to mspro_block_disk_lock and therefore
unnecessary.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomemstick: avert possible race condition between idr_pre_get and idr_get_new
Alex Dubov [Thu, 13 Jan 2011 01:01:04 +0000 (17:01 -0800)]
memstick: avert possible race condition between idr_pre_get and idr_get_new

Implement the usual pattern around idr_pre_get() and idr_get_new() to
handlethe situation where another thread concurrently steals this thread's
idr_pre_get() preallocation.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomemstick: add support for JMicron JMB 385 and 390 controllers
Takashi Iwai [Thu, 13 Jan 2011 01:01:03 +0000 (17:01 -0800)]
memstick: add support for JMicron JMB 385 and 390 controllers

Signed-off-by: Aries Lee <arieslee@jmicron.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomemstick: set PMOS values propery for JMicron 38x controllers
Takashi Iwai [Thu, 13 Jan 2011 01:01:02 +0000 (17:01 -0800)]
memstick: set PMOS values propery for JMicron 38x controllers

Add a function jmb38x_ms_pmos() to enable / disable PMOS setups for
JMicron 38x controllers.

Signed-off-by: Aries Lee <arieslee@jmicron.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomemstick: fix setup for JMicron 38x controllers
Takashi Iwai [Thu, 13 Jan 2011 01:01:01 +0000 (17:01 -0800)]
memstick: fix setup for JMicron 38x controllers

This patch corrects the definition of clock values for JMicron 38x
controllers and sets the value properly per interface type.
Also, it adds a check for TPC errors in the interrupt handler.

Signed-off-by: Aries Lee <arieslee@jmicron.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomemstick: core: fix device_register() error handling
Vasiliy Kulikov [Thu, 13 Jan 2011 01:01:00 +0000 (17:01 -0800)]
memstick: core: fix device_register() error handling

If device_register() fails then call put_device().  See comment to
device_register.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopps: add parallel port PPS signal generator
Alexander Gordeev [Thu, 13 Jan 2011 01:01:00 +0000 (17:01 -0800)]
pps: add parallel port PPS signal generator

Add PPS signal generator which utilizes STROBE pin of a parallel port to
send PPS signals.  It uses parport abstraction layer and hrtimers to
precisely control the signal.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopps: add parallel port PPS signal generator
Alexander Gordeev [Thu, 13 Jan 2011 01:00:59 +0000 (17:00 -0800)]
pps: add parallel port PPS signal generator

Add PPS signal generator which utilizes STROBE pin of a parallel port to
send PPS signals.  It uses parport abstraction layer and hrtimers to
precisely control the signal.

[akpm@linux-foundation.org: fix build]
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopps: add parallel port PPS client
Alexander Gordeev [Thu, 13 Jan 2011 01:00:58 +0000 (17:00 -0800)]
pps: add parallel port PPS client

Add parallel port PPS client.  It uses a standard method for capturing
timestamps for assert edge transitions: getting a timestamp soon after an
interrupt has happened.

This is not a very precise source of time information due to interrupt
handling delays.  However, timestamps for clear edge transitions are much
more precise because the interrupt handler continuously polls hardware
port until the transition is done.

Hardware port operations require only about 1us so the maximum error
should not exceed this value.  This was my primary goal when developing
this client.

Clear edge capture could be disabled using clear_wait parameter.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopps: add kernel consumer support
Alexander Gordeev [Thu, 13 Jan 2011 01:00:58 +0000 (17:00 -0800)]
pps: add kernel consumer support

Add an optional feature of PPSAPI, kernel consumer support, which uses the
added hardpps() function.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopps: capture MONOTONIC_RAW timestamps as well
Alexander Gordeev [Thu, 13 Jan 2011 01:00:57 +0000 (17:00 -0800)]
pps: capture MONOTONIC_RAW timestamps as well

MONOTONIC_RAW clock timestamps are ideally suited for frequency
calculation and also fit well into the original NTP hardpps design.  Now
phase and frequency can be adjusted separately: the former based on
REALTIME clock and the latter based on MONOTONIC_RAW clock.

A new function getnstime_raw_and_real is added to timekeeping subsystem to
capture both timestamps at the same time and atomically.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agontp: add hardpps implementation
Alexander Gordeev [Thu, 13 Jan 2011 01:00:56 +0000 (17:00 -0800)]
ntp: add hardpps implementation

This commit adds hardpps() implementation based upon the original one from
the NTPv4 reference kernel code from David Mills.  However, it is highly
optimized towards very fast syncronization and maximum stickness to PPS
signal.  The typical error is less then a microsecond.

To make it sync faster I had to throw away exponential phase filter so
that the full phase offset is corrected immediately.  Then I also had to
throw away median phase filter because it gives a bigger error itself if
used without exponential filter.

Maybe we will find an appropriate filtering scheme in the future but it's
not necessary if the signal quality is ok.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopps: timestamp is always passed to dcd_change()
Alexander Gordeev [Thu, 13 Jan 2011 01:00:55 +0000 (17:00 -0800)]
pps: timestamp is always passed to dcd_change()

Remove the code that gatheres timestamp in pps_tty_dcd_change() in case
passed ts parameter is NULL because it never happens in the current code.
Fix comments as well.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopps: simplify conditions a bit
Alexander Gordeev [Thu, 13 Jan 2011 01:00:54 +0000 (17:00 -0800)]
pps: simplify conditions a bit

Bitwise conjunction is distributive so we can simplify some conditions.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopps: use BUG_ON for kernel API safety checks
Alexander Gordeev [Thu, 13 Jan 2011 01:00:54 +0000 (17:00 -0800)]
pps: use BUG_ON for kernel API safety checks

This way less overhead is involved when running production kernel.  If you
want to debug a pps client module please define DEBUG to enable the
checks.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopps: make idr lock a mutex and protect idr_pre_get
Alexander Gordeev [Thu, 13 Jan 2011 01:00:53 +0000 (17:00 -0800)]
pps: make idr lock a mutex and protect idr_pre_get

Now pps_idr_lock is never used in interrupt context so we can replace
spin_lock_irq/spin_unlock_irq with plain spin_lock/spin_unlock. But
there is also a potential race condition when someone can steal an id
which was allocated by idr_pre_get before it is used. So convert spin
lock to mutex and protect the whole id generation process.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopps: move idr stuff to pps.c
Alexander Gordeev [Thu, 13 Jan 2011 01:00:53 +0000 (17:00 -0800)]
pps: move idr stuff to pps.c

Since now idr is only used to manage char device id's and not used in
kernel API anymore it should be moved to pps.c.  This also makes it
possible to release id only at actual device freeing so nobody can
register a pps device with the same id while our device is not freed yet.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopps: convert printk/pr_* to dev_*
Alexander Gordeev [Thu, 13 Jan 2011 01:00:52 +0000 (17:00 -0800)]
pps: convert printk/pr_* to dev_*

Since we now have direct pointers to struct pps_device everywhere it's
easy to use dev_* functions to print messages instead of plain printks.
Where dev_* cannot be used printks are converted to pr_*.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopps: access pps device by direct pointer
Alexander Gordeev [Thu, 13 Jan 2011 01:00:51 +0000 (17:00 -0800)]
pps: access pps device by direct pointer

Using device index as a pointer needs some unnecessary work to be done
every time the pointer is needed (in irq handler for example).  Using a
direct pointer is much more easy (and safe as well).

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopps: unify timestamp gathering
Alexander Gordeev [Thu, 13 Jan 2011 01:00:50 +0000 (17:00 -0800)]
pps: unify timestamp gathering

Add a helper function to gather timestamps.  This way clients don't have
to duplicate it.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopps: fix race in PPS_FETCH handler
Alexander Gordeev [Thu, 13 Jan 2011 01:00:50 +0000 (17:00 -0800)]
pps: fix race in PPS_FETCH handler

There was a race in PPS_FETCH ioctl handler when several processes want to
obtain PPS data simultaneously using sleeping PPS_FETCH.  They all sleep
most of the time in the system call.

With the old approach when the first process waiting on the pps queue is
waken up it makes new system call right away and zeroes pps->go.  So other
processes continue to sleep.  This is a clear race condition because of
the global 'go' variable.

With the new approach pps->last_ev holds some value increasing at each PPS
event.  PPS_FETCH ioctl handler saves current value to the local variable
at the very beginning so it can safely check that there is a new event by
just comparing both variables.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopps: declare variables where they are used in switch
Alexander Gordeev [Thu, 13 Jan 2011 01:00:49 +0000 (17:00 -0800)]
pps: declare variables where they are used in switch

Move variable declarations where they are used in pps_cdev_ioctl.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopps: trivial fixes
Alexander Gordeev [Thu, 13 Jan 2011 01:00:49 +0000 (17:00 -0800)]
pps: trivial fixes

Here are some very trivial fixes combined:

- add macro definitions to protect header file from including several times

- remove declaration for an unexistent array

- fix typos

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agotaskstats: use better ifdef for alignment
Jeff Mahoney [Thu, 13 Jan 2011 01:00:48 +0000 (17:00 -0800)]
taskstats: use better ifdef for alignment

Commit 4be2c95d ("taskstats: pad taskstats netlink response for aligment
issues on ia64") added a null field to align the taskstats structure but
the discussion centered around ia64.  The issue exists on other platforms
with inefficient unaligned access and adding them piecemeal would be an
unmaintainable mess.

This patch uses Dave Miller's suggestion of using a combination of
CONFIG_64BIT && !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to determine
whether alignment is needed.

Note that this will cause breakage on those platforms with applications
like iotop which had hard-coded offsets into the packet to access the
taskstats structure.

The message seen on systems without the alignment fixes looks like: kernel
unaligned access to 0xe000023879dca9bc, ip=0xa000000100133d10

The addresses may vary but resolve to locations inside __delayacct_add_tsk.

iotop makes what I'd call unreasonable assumptions about the contents of a
netlink genetlink packet containing generic attributes.  They're typed and
have headers that specify value lengths, so the client can (should)
identify and skip the ones the client doesn't understand.

The kernel, as of version 2.6.36, presented a packet like so:
+--------------------------------+
| genlmsghdr - 4 bytes           |
+--------------------------------+
| NLA header - 4 bytes           | /* Aggregate header */
+-+------------------------------+
| | NLA header - 4 bytes         | /* PID header */
| +------------------------------+
| | pid/tgid   - 4 bytes         |
| +------------------------------+
| | NLA header - 4 bytes         | /* stats header */
| + -----------------------------+ <- oops. aligned on 4 byte boundary
| | struct taskstats - 328 bytes |
+-+------------------------------+

The iotop code expects that the kernel will behave as it did then,
assuming that the packet format is set in stone.  The format is set in
stone, but the packet offsets are not.  There's nothing in the packet
format that guarantees that the packet will be sent in exactly the same
way.  The attribute contents are set (or versioned) and the aggregate
contents are set but they can be anywhere in the packet.

The issue here isn't that an unaligned structure gets passed to userspace,
it's that the NLA infrastructure has something of a weakness: The 4 byte
attribute header may force the payload to be unaligned.  The taskstats
structure is created at an unaligned location and then 64-bit values are
operated on inside the kernel, so the unaligned access warnings gets
spewed everywhere.

It's possible to use the unaligned access API to operate on the structure
in the kernel but it seems like a wasted effort to work around userspace
code that isn't following the packet format.  Any new additions would also
need the be worked around.  It's a maintenance nightmare.

The conclusion of the earlier discussion seemed to be "ok fine, if we have
to break it, don't break it on arches that don't have the problem." Dave
pointed out that the unaligned access problem doesn't only exist on ia64,
but also on other 64-bit arches that don't have efficient unaligned access
and it should be fixed there as well.  The committed version of the patch
and this addition keep with the conclusion of that discussion not to break
it unnecessarily, which the pid padding and the packet padding fixes did
do.  x86_64 and powerpc don't suffer this problem so they shouldn't suffer
the solution.  Other 64-bit architectures do and will, though.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reported-by: David S. Miller <davem@davemloft.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Florian Mickler <florian@mickler.org>
Cc: Guillaume Chazarain <guichaz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoNFC: Driver for NXP Semiconductors PN544 NFC chip.
Matti J. Aaltonen [Thu, 13 Jan 2011 01:00:47 +0000 (17:00 -0800)]
NFC: Driver for NXP Semiconductors PN544 NFC chip.

Creates a new "Near Field Communication" subsystem in drivers/nfc.
http://en.wikipedia.org/wiki/Near_Field_Communication is useful ;)

This is a driver for the pn544 NFC device. The driver transfers
ETSI messages between the device and the user space.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agouser_ns: improve the user_ns on-the-slab packaging
Pavel Emelyanov [Thu, 13 Jan 2011 01:00:46 +0000 (17:00 -0800)]
user_ns: improve the user_ns on-the-slab packaging

Currently on 64-bit arch the user_namespace is 2096 and when being
kmalloc-ed it resides on a 4k slab wasting 2003 bytes.

If we allocate a separate cache for it and reduce the hash size from 128
to 64 chains the packaging becomes *much* better - the struct is 1072
bytes and the hole between is 98 bytes.

[akpm@linux-foundation.org: s/__initcall/module_init/]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agosysctl: remove obsolete comments
Jovi Zhang [Thu, 13 Jan 2011 01:00:45 +0000 (17:00 -0800)]
sysctl: remove obsolete comments

ctl_unnumbered.txt have been removed in Documentation directory so just
also remove this invalid comments

[akpm@linux-foundation.org: fix Documentation/sysctl/00-INDEX, per Dave]
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Cc: Dave Young <hidave.darkstar@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>