pandora-kernel.git
11 years agoInput: joydev - allow binding to button-only devices
Christoph Fritz [Sun, 25 Apr 2010 04:41:05 +0000 (21:41 -0700)]
Input: joydev - allow binding to button-only devices

Dance pads don't have an axis, so allow this kind of controllers
to be used via legacy joystick interface.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: elantech - ignore high bits in the position coordinates
Florian Ragwitz [Tue, 4 May 2010 06:29:37 +0000 (23:29 -0700)]
Input: elantech - ignore high bits in the position coordinates

In older versions of the elantech hardware/firmware those bits always
were unset, so it didn't actually matter, but newer versions seem to
use those high bits for something else, screwing up the coordinates
we report to the input layer for those devices.

Signed-off-by: Florian Ragwitz <rafl@debian.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: elantech - allow forcing Elantech protocol
Florian Ragwitz [Tue, 27 Apr 2010 07:47:04 +0000 (00:47 -0700)]
Input: elantech - allow forcing Elantech protocol

Apparently hardware vendors now ship elantech touchpads with different version
magic. This options allows for them to be tested easier with the current driver
in order to add their magic to the whitelist later.

Signed-off-by: Florian Ragwitz <rafl@debian.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: elantech - fix firmware version check
Florian Ragwitz [Tue, 27 Apr 2010 07:45:10 +0000 (00:45 -0700)]
Input: elantech - fix firmware version check

The check determining whether device should use 4- or 6-byte packets
was trying to compare firmware with 2.48, but was failing on majors
greater than 2. The new check ensures that versions like 4.1 are
checked properly.

Signed-off-by: Florian Ragwitz <rafl@debian.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: ati_remote - add some missing devices from lirc_atiusb
Jarod Wilson [Tue, 4 May 2010 06:30:32 +0000 (23:30 -0700)]
Input: ati_remote - add some missing devices from lirc_atiusb

The (out-of-tree) lirc_atiusb driver has a much longer list of devices
it supports.  Some of them look like they may just be guesses at possible
device IDs, but a few are definitely confirmed devices.  This adds the
nVidia-branded RF receiver and the X10 Lola Wireless Video Sender device
(which contains an RF receiver) to the list of devices in ati_remote.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: eeti_ts - cancel pending work when going to suspend
Daniel Mack [Mon, 19 Apr 2010 07:42:16 +0000 (00:42 -0700)]
Input: eeti_ts - cancel pending work when going to suspend

This fixes a race between the suspend code and input events.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: Add support of Synaptics Clickpad device
Takashi Iwai [Mon, 19 Apr 2010 17:37:21 +0000 (10:37 -0700)]
Input: Add support of Synaptics Clickpad device

The new type of touchpads can be detected via a new query command
0x0c. The clickpad flags are in cap[0]:4 and cap[1]:0 bits.

When the device is detected, the driver now reports only the left
button as the supported buttons so that X11 driver can detect that
the device is Clickpad. A Clickpad device gives the button events
only as the middle button. The kernel driver morphs to the left
button. The real handling of Clickpad is done rather in X driver
side.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoRevert "Input: ALPS - add signature for HP Pavilion dm3 laptops"
Dmitry Torokhov [Tue, 20 Apr 2010 07:37:21 +0000 (00:37 -0700)]
Revert "Input: ALPS - add signature for HP Pavilion dm3 laptops"

This reverts commit 5e28d8eb68c12eab9c4a47b42ba993a6420d71d3 since
the magic knock does not work for this model of the touchpad and the
device stays in PS/2 compatibility mode.

11 years agoInput: psmouse - ignore parity error for basic protocols
Dmitry Torokhov [Mon, 19 Apr 2010 07:42:16 +0000 (00:42 -0700)]
Input: psmouse - ignore parity error for basic protocols

Observing behavior of the other OS it appears that parity errors reported
by the keyboard controller are being ignored and the data is processed
as usual. Let's do the same for standard PS/2 protocols (bare, Intellimouse
and Intellimouse Explorer) to provide better compatibility. Thsi should fix
teh following bug:

https://bugzilla.kernel.org/show_bug.cgi?id=6105

Thanks for Damjan Jovanovic for locating the source of issue and ideas
for the patch.

Tested-by: Damjan Jovanovic <damjan.jov@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: wacom - switch mode upon system resume
Ping Cheng [Wed, 14 Apr 2010 06:07:52 +0000 (23:07 -0700)]
Input: wacom - switch mode upon system resume

When Wacom devices wake up from a sleep, the switch mode command
(wacom_query_tablet_data) is needed before wacom_open is called.
wacom_query_tablet_data should not be executed inside wacom_open
since wacom_open is called more than once during probe.

wacom_retrieve_hid_descriptor is removed from wacom_resume due
to the fact that the required descriptors are stored properly
upon system resume.

Reported-and-tested-by: Anton Anikin <Anton@Anikin.name>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoRevert "Input: wacom - merge out and in prox events"
Dmitry Torokhov [Wed, 14 Apr 2010 06:08:58 +0000 (23:08 -0700)]
Revert "Input: wacom - merge out and in prox events"

This reverts commit 776943fd6f104a6e8457dc95a17282e69e963666 as it
causes issues with ISDv4 E3 touchscreens:

https://bugzilla.kernel.org/show_bug.cgi?id=15670

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: matrix_keypad - allow platform to disable key autorepeat
H Hartley Sweeten [Tue, 6 Apr 2010 05:29:09 +0000 (22:29 -0700)]
Input: matrix_keypad - allow platform to disable key autorepeat

In an embedded system the matrix_keypad driver might be used to
interface with an external control panel and not an actual keyboard.
On the control panel some of the keys could be used to turn on/off
various functions.  If key autorepeat is enabled this causes the
function to quickly toggle between the on and off states and makes
operation difficult.

Add an option in the platform-specific data to disable the key
autorepeat.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: ALPS - add signature for HP Pavilion dm3 laptops
Chase Douglas [Tue, 6 Apr 2010 05:29:08 +0000 (22:29 -0700)]
Input: ALPS - add signature for HP Pavilion dm3 laptops

Tested by a user running Ubuntu 9.10 in the following bug report.

BugLink: http://bugs.launchpad.net/bugs/545307
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: i8042 - spelling fix
Dominik Brodowski [Tue, 6 Apr 2010 05:29:09 +0000 (22:29 -0700)]
Input: i8042 - spelling fix

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: sparse-keymap - implement safer freeing of the keymap
Dmitry Torokhov [Mon, 22 Mar 2010 05:56:15 +0000 (22:56 -0700)]
Input: sparse-keymap - implement safer freeing of the keymap

Allow calling sparse_keymap_free() before unregistering input device
whithout risk of racing with EVIOCGETKEYCODE and EVIOCSETKEYCODE.
This makes life of drivers writers easier.

Acked-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: update the status of the Multitouch X driver project
Henrik Rydberg [Mon, 22 Mar 2010 05:31:26 +0000 (22:31 -0700)]
Input: update the status of the Multitouch X driver project

The Multitouch X driver project has moved to alpha status.
This patch updates the documentation accordingly.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: clarify the no-finger event in multitouch protocol
Henrik Rydberg [Mon, 22 Mar 2010 05:31:26 +0000 (22:31 -0700)]
Input: clarify the no-finger event in multitouch protocol

The current documentation does not explicitly specify how to report
zero fingers, leaving a potential problem in the driver implementations
and giving no parsing directive to userland. This patch defines two
equally valid ways.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: bcm5974 - retract efi-broken suspend_resume
Henrik Rydberg [Sat, 20 Mar 2010 07:06:40 +0000 (00:06 -0700)]
Input: bcm5974 - retract efi-broken suspend_resume

With the recent system-wide improvements on suspend/resume and EFI
booting the suspend_resume method of the bcm5974 has broken. When
waking up from the S3 state on the MacBookAir, the trackpad is found
in a yet unknown state, unable to switch to the proper multitouch
mode. The result is a frozen touchpad, and a flood of errors of the
kind

bcm5974: bad trackpad package, length: 8.

This patch retracts the reset_resume method altogether, falling back
on the generic unbind/rebind functionality of the usb layer until
further investigations can be made as how to reset the device when
booting from efi.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: sparse-keymap - free the right keymap on error
Yong Wang [Sat, 20 Mar 2010 06:02:16 +0000 (23:02 -0700)]
Input: sparse-keymap - free the right keymap on error

'map' is allocated in sparse_keymap_setup() and it it the one that should
be freed on error instead of 'keymap'.

Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: i8042 - add ALDI/MEDION netbook E1222 to qurik reset table
Christoph Fritz [Sun, 14 Mar 2010 06:26:23 +0000 (22:26 -0800)]
Input: i8042 - add ALDI/MEDION netbook E1222 to qurik reset table

ALDI/MEDION netbook E1222 needs to be in the reset quirk list for
its touchpad's proper function.

Reported-by: Michael Fischer <mifi@gmx.de>
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: ALPS - fix stuck buttons on some touchpads
Martin Buck [Sun, 14 Mar 2010 06:23:58 +0000 (22:23 -0800)]
Input: ALPS - fix stuck buttons on some touchpads

Enable button release event redirection to the device that got the
button press not only for touchpads with interleaved protocols, but
unconditionally for all Alps touchpads. This is required at least
for the touchpads in Dell Inspiron 8200 and Latitude d630.

Signed-off-by: Martin Buck <mb-tmp-yvahk-vachg@gromit.dyndns.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: wm831x-on - convert to use genirq
Mark Brown [Thu, 11 Mar 2010 07:41:33 +0000 (23:41 -0800)]
Input: wm831x-on - convert to use genirq

Now that the WM831x core has been converted to use genirq for the
interrupt controller there is no need for the client drivers to
use a WM831x-specific API rather than just calling genirq directly.

Also fixes a leak of the IRQ during init failure - the error path
free_irq() was using NULL rather than the driver data as the data
pointer so free_irq() wouldn't have matched.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: ads7846 - add wakeup support
Ranjith Lohithakshan [Thu, 11 Mar 2010 07:41:22 +0000 (23:41 -0800)]
Input: ads7846 - add wakeup support

Add wakeup support to the ads7846 driver. Platforms can enable wakeup
capability by setting the wakeup flag in ads7846_platform_data. With this
patch the ads7846 driver can be used to wake the system from suspend.

Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: appletouch - fix integer overflow issue
Vadim Zaliva [Thu, 11 Mar 2010 07:41:00 +0000 (23:41 -0800)]
Input: appletouch - fix integer overflow issue

When reading data from Geyser 2 touchpads used on post Oct 2005 Apple
PowerBooks the driver was casting X and Y coordinates values to
'signed char'. Testing on one of such PowerBooks I have noticed that
touchpad always generates positive values, but some of them are greater
that 127, and thus, when cast to 'signed char' being interpreted as
a negative.

Such bigger values have been observed infrequently, closer to the
edges of a touchpad, so the problem was not very visible.
Nevertheless, the patch would potentially improve touchpad
driver accuracy.

Signed-off-by: Vadim Zaliva <lord@crocodile.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: ad7877 - increase pen up imeout
Michael Hennerich [Wed, 10 Mar 2010 04:38:47 +0000 (20:38 -0800)]
Input: ad7877 - increase pen up imeout

The time interval between consecutive interrupts depends on a number of
tunables: first_conversion_delay, acquisition_time, averaging and foremost
the pen_down_acc_interval.

Since the mod_timer() action for the PEN UP event happens in the
spi_async() callback function, latencies incurred by the spi bus drivers
also need to be taken into account.

So all in all, give the PEN UP event a bit more wiggle room and increase
timeout to 100ms.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: ads7846 - add support for AD7843 parts
Michael Hennerich [Wed, 10 Mar 2010 04:38:45 +0000 (20:38 -0800)]
Input: ads7846 - add support for AD7843 parts

The AD7873 is almost identical to the ADS7846; the only difference is
related to the Power Management bits PD0 and PD1.  This results in a
slightly different PENIRQ enable behavior.  For the AD7873, VREF should
be turned off during differential measurements.

So, add the AD7873/43 to the list of driver supported devices, and prevent
VREF usage during differential/ratiometric conversion modes.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: bf54x-keys - fix system hang when pressing a key
Mike Frysinger [Wed, 10 Mar 2010 04:38:45 +0000 (20:38 -0800)]
Input: bf54x-keys - fix system hang when pressing a key

We need to use the nosync version of disable_irq so that we don't hang in
the IRQ handler as we don't ACK the interrupt until later.  This used to
work regardless, but at some point, the IRQ behavior changed.  Not sure
when exactly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: alps - add support for the touchpad on Toshiba Tecra A11-11L
Thomas Bächler [Wed, 10 Mar 2010 04:38:48 +0000 (20:38 -0800)]
Input: alps - add support for the touchpad on Toshiba Tecra A11-11L

Signed-off-by: Thomas Bächler <thomas@archlinux.org>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: remove BKL, fix input_open_file() locking
Arnd Bergmann [Wed, 10 Mar 2010 04:38:48 +0000 (20:38 -0800)]
Input: remove BKL, fix input_open_file() locking

Holding the BKL in input_open_file seems pointless because it does not
protect against updates of input_table, and all open functions from the
underlying drivers have proper mutex locking.

This makes input_open_file take the input_mutex when accessing
the table and no lock when calling into the lower function.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: serio_raw - remove BKL
Thadeu Lima de Souza Cascardo [Wed, 10 Mar 2010 04:38:47 +0000 (20:38 -0800)]
Input: serio_raw - remove BKL

serio_raw open function already uses a mutex. Also change formatting
a bit.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: mousedev - remove BKL
Thadeu Lima de Souza Cascardo [Wed, 10 Mar 2010 04:38:47 +0000 (20:38 -0800)]
Input: mousedev - remove BKL

There's no need for BKL in mousedev, relevan protection is provided by
a private mutex.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: add driver for TWL4030 vibrator device
Jari Vanhala [Tue, 9 Mar 2010 08:29:46 +0000 (00:29 -0800)]
Input: add driver for TWL4030 vibrator device

TWL4030 Vibrator implemented via Force Feedback interface.
This uses MFD TWL4030 codec and own dynamic workqueue.

Signed-off-by: Jari Vanhala <ext-jari.vanhala@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: enable remote wakeup for PNP i8042 keyboard ports
Alan Stern [Tue, 9 Mar 2010 07:42:46 +0000 (23:42 -0800)]
Input: enable remote wakeup for PNP i8042 keyboard ports

This patch (as1355) enables remote wakeup by default on PNP i8042
keyboard ports.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: scancode in get/set_keycodes should be unsigned
Dmitry Torokhov [Tue, 9 Mar 2010 06:37:10 +0000 (22:37 -0800)]
Input: scancode in get/set_keycodes should be unsigned

The HID layer has some scan codes of the form 0xffbc0000 for logitech
devices which do not work if scancode is typed as signed int, so we need
to switch to unsigned it instead. While at it keycode being signed does
not make much sense either.

Acked-by: Márton Németh <nm127@freemail.hu>
Acked-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: i8042 - use platfrom_create_bundle() helper
Dmitry Torokhov [Tue, 9 Mar 2010 06:37:09 +0000 (22:37 -0800)]
Input: i8042 - use platfrom_create_bundle() helper

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoMerge commit 'v2.6.34-rc1' into for-linus
Dmitry Torokhov [Tue, 9 Mar 2010 07:17:32 +0000 (23:17 -0800)]
Merge commit 'v2.6.34-rc1' into for-linus

11 years agoLinux 2.6.34-rc1 v2.6.34-rc1
Linus Torvalds [Mon, 8 Mar 2010 18:45:44 +0000 (10:45 -0800)]
Linux 2.6.34-rc1

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
Linus Torvalds [Mon, 8 Mar 2010 18:17:20 +0000 (10:17 -0800)]
Merge git://git./linux/kernel/git/gregkh/driver-core-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (62 commits)
  msi-laptop: depends on RFKILL
  msi-laptop: Detect 3G device exists by standard ec command
  msi-laptop: Add resume method for set the SCM load again
  msi-laptop: Support some MSI 3G netbook that is need load SCM
  msi-laptop: Add threeg sysfs file for support query 3G state by standard 66/62 ec command
  msi-laptop: Support standard ec 66/62 command on MSI notebook and nebook
  Driver core: create lock/unlock functions for struct device
  sysfs: fix for thinko with sysfs_bin_attr_init()
  sysfs: Kill unused sysfs_sb variable.
  sysfs: Pass super_block to sysfs_get_inode
  driver core: Use sysfs_rename_link in device_rename
  sysfs: Implement sysfs_rename_link
  sysfs: Pack sysfs_dirent more tightly.
  sysfs: Serialize updates to the vfs inode
  sysfs: windfarm: init sysfs attributes
  sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on module dynamic attributes
  sysfs: Document sysfs_attr_init and sysfs_bin_attr_init
  sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on dynamic attributes
  sysfs: Use one lockdep class per sysfs attribute.
  sysfs: Only take active references on attributes.
  ...

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Mon, 8 Mar 2010 15:35:30 +0000 (07:35 -0800)]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] i6300esb.c: change platform_driver to pci_driver
  [WATCHDOG] i6300esb: fix unlock register with
  [WATCHDOG] drivers/watchdog/wdt.c:wdt_ioctl(): make `ident' non-static
  [WATCHDOG] change reboot_notifier to platform-shutdown method.
  [WATCHDOG] watchdog_info constify
  [WATCHDOG] gef_wdt: Author corrections following split of GE Fanuc joint venture
  [WATCHDOG] iTCO_wdt: clean up probe(), modify err msg
  [WATCHDOG] ep93xx: watchdog timer driver for TS-72xx SBCs cleanup
  [WATCHDOG] support for max63xx watchdog timer chips
  [WATCHDOG] ep93xx: added platform side support for TS-72xx WDT driver
  [WATCHDOG] ep93xx: implemented watchdog timer driver for TS-72xx SBCs

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Mon, 8 Mar 2010 15:34:26 +0000 (07:34 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (26 commits)
  ALSA: hdmi - show debug message on changing audio infoframe
  ALSA: hdmi - merge common code for intelhdmi and nvhdmi
  ALSA: hda - Add ASRock mobo to MSI blacklist
  ALSA: hda: uninitialized variable fix
  ALSA: hda: Use LPIB for a Biostar Microtech board
  ALSA: usb/audio.h: Fix field order
  ALSA: fix jazz16 compile (udelay)
  ALSA: hda: Use LPIB for Dell Latitude 131L
  ALSA: hda - Build hda_eld into snd-hda-codec module
  ALSA: hda - Support NVIDIA MCP89 and GT21x hdmi audio
  ALSA: hda - Support max codecs to 8 for nvidia hda controller
  ALSA: riptide: clean up while loop
  ALSA: usbaudio - remove debug "SAMPLE BYTES" printk line
  ALSA: timer - pass real event in snd_timer_notify1() to instance callback
  ALSA: oxygen: change || to &&
  ALSA: opti92x: use PnP data to select Master Control port
  ASoC: fix ak4104 register array access
  ASoC: soc_pcm_open: Add missing bailout tag
  ALSA: usbaudio: Fix wrong bitrate for Creative Creative VF0470 Live Cam
  ALSA: ua101: removing debugging code
  ...

11 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Mon, 8 Mar 2010 15:33:46 +0000 (07:33 -0800)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] smsgiucv_app: deliver z/VM CP special messages (SMSG) as uevents
  [S390] smsgiucv: declare char pointers as "const"
  [S390] dasd: automatic recognition of read-only devices
  [S390] remove unused qdio flags in zfcp and qeth
  [S390] Cleanup xtime usage
  [S390] qdio: add missing bracket
  [S390] cio: fix init_count in case of recognition after steal lock
  [S390] dasd: security and PSF update patch for EMC CKD ioctl
  [S390] hvc_iucv: allocate memory buffers for IUCV in zone DMA
  [S390] uaccess: make sure copy_from_user_overflow is builtin

11 years agoFS-Cache: Remove the EXPERIMENTAL flag
Christian Kujau [Mon, 8 Mar 2010 15:03:09 +0000 (15:03 +0000)]
FS-Cache: Remove the EXPERIMENTAL flag

Remove the EXPERIMENTAL flag from FS-Cache so that Ubuntu can make use of the
facility.

Signed-off-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years ago[WATCHDOG] i6300esb.c: change platform_driver to pci_driver
Wim Van Sebroeck [Mon, 8 Mar 2010 13:48:01 +0000 (13:48 +0000)]
[WATCHDOG] i6300esb.c: change platform_driver to pci_driver

Since the intel 6300esb platform uses a dedicated PCI ID for
it's watchdog timer (00:1d.4), it's better and easier to have
this as a pci_driver.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
11 years ago[S390] smsgiucv_app: deliver z/VM CP special messages (SMSG) as uevents
Hendrik Brueckner [Mon, 8 Mar 2010 11:26:26 +0000 (12:26 +0100)]
[S390] smsgiucv_app: deliver z/VM CP special messages (SMSG) as uevents

The smsgiucv_app driver registers a callback with the smsgiucv driver
to receive z/VM CP special messages (SMSG) starting with "APP".

When the callback is called for special messages, the driver creates
an uevent for the received message.  The uevent consists of additional
environment data containing the message prefix ("APP"), message sender,
and message content.

udev rules can be used to trigger application specific actions through
matching the content or sender of the special message.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] smsgiucv: declare char pointers as "const"
Hendrik Brueckner [Mon, 8 Mar 2010 11:26:25 +0000 (12:26 +0100)]
[S390] smsgiucv: declare char pointers as "const"

Declare the smsgiucv prefix char pointer as "const" and use
use const char pointers in callback functions.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] dasd: automatic recognition of read-only devices
Stefan Weinhuber [Mon, 8 Mar 2010 11:26:24 +0000 (12:26 +0100)]
[S390] dasd: automatic recognition of read-only devices

In z/VM it is possible to attach a device as read-only. To prevent
unintentional write requests and subsequent I/O errors, we can detect
this configuration using the z/VM DIAG 210 interface and set the
respective linux block device to read-only as well.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] remove unused qdio flags in zfcp and qeth
Ursula Braun [Mon, 8 Mar 2010 11:25:20 +0000 (12:25 +0100)]
[S390] remove unused qdio flags in zfcp and qeth

zfcp and qeth are setting flags for the qdio-layer, but these flags
are not used in qdio. Patch removes the flag definitions from qdio
and their settings in zfcp and qeth.

Cc: Jan Glauber <jang@linux.vnet.ibm.com>
Cc: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] Cleanup xtime usage
John Stultz [Mon, 8 Mar 2010 11:25:19 +0000 (12:25 +0100)]
[S390] Cleanup xtime usage

This replaces direct xtime usage in the s390 arch with timekeeping accessors,
so we can further clean up the timekeeping core.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] qdio: add missing bracket
Ursula Braun [Mon, 8 Mar 2010 11:25:18 +0000 (12:25 +0100)]
[S390] qdio: add missing bracket

Add a missing bracket to only log the outbound handler event in the
appropriate case.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] cio: fix init_count in case of recognition after steal lock
Sebastian Ott [Mon, 8 Mar 2010 11:25:17 +0000 (12:25 +0100)]
[S390] cio: fix init_count in case of recognition after steal lock

After we try to steal a lock on a ccw device in boxed state,
we have to restart device recognition and potentially reprobing.

In this case ccw_device_init_count was erroneously decreased
twice. This patch fixes the issue.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] dasd: security and PSF update patch for EMC CKD ioctl
Nigel Hislop [Mon, 8 Mar 2010 11:25:16 +0000 (12:25 +0100)]
[S390] dasd: security and PSF update patch for EMC CKD ioctl

Remove the PSF order/suborder check from the Symmetrix CKD dasd ioctl.
In exchange restrict the ioctl to CAP_SYS_ADMIN and CAP_SYS_RAWIO.

Signed-off-by: Nigel Hislop <hislop_nigel@emc.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] hvc_iucv: allocate memory buffers for IUCV in zone DMA
Hendrik Brueckner [Mon, 8 Mar 2010 11:25:15 +0000 (12:25 +0100)]
[S390] hvc_iucv: allocate memory buffers for IUCV in zone DMA

The device driver must allocate memory for IUCV buffers with GFP_DMA,
because IUCV cannot address memory above 2GB (31bit addresses only).

Because the IUCV ignores the higher bits of the address, sending and
receiving IUCV data with this driver might cause memory corruptions.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] uaccess: make sure copy_from_user_overflow is builtin
Heiko Carstens [Mon, 8 Mar 2010 11:25:14 +0000 (12:25 +0100)]
[S390] uaccess: make sure copy_from_user_overflow is builtin

If there is no in kernel image caller modules will suffer:

ERROR: "copy_from_user_overflow" [net/core/pktgen.ko] undefined!
ERROR: "copy_from_user_overflow" [net/can/can-raw.ko] undefined!
ERROR: "copy_from_user_overflow" [fs/cifs/cifs.ko] undefined!

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[WATCHDOG] i6300esb: fix unlock register with
Wim Van Sebroeck [Mon, 8 Mar 2010 11:02:38 +0000 (11:02 +0000)]
[WATCHDOG] i6300esb: fix unlock register with

Before you can read or write from the i6300esb memeory mapped registers,
you need to unlock these. This is done by writing the magic numbers 0x80
and 0x86 to the reload register. The size of the reload register is 32bit
though.

Also binary 11 is hex 0x03 and not 0x11.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
11 years agoMerge branch 'topic/misc' into for-linus
Takashi Iwai [Mon, 8 Mar 2010 08:35:50 +0000 (09:35 +0100)]
Merge branch 'topic/misc' into for-linus

11 years agoMerge branch 'topic/asoc' into for-linus
Takashi Iwai [Mon, 8 Mar 2010 08:35:48 +0000 (09:35 +0100)]
Merge branch 'topic/asoc' into for-linus

11 years agoMerge branch 'topic/hda' into for-linus
Takashi Iwai [Mon, 8 Mar 2010 08:35:43 +0000 (09:35 +0100)]
Merge branch 'topic/hda' into for-linus

11 years agoALSA: hdmi - show debug message on changing audio infoframe
Wu Fengguang [Mon, 8 Mar 2010 02:45:38 +0000 (10:45 +0800)]
ALSA: hdmi - show debug message on changing audio infoframe

Also change printk level for the two others.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
11 years agoALSA: hdmi - merge common code for intelhdmi and nvhdmi
Wu Fengguang [Mon, 8 Mar 2010 02:44:23 +0000 (10:44 +0800)]
ALSA: hdmi - merge common code for intelhdmi and nvhdmi

Create patch_hdmi.c to hold common code from intelhdmi and nvhdmi.

For now the patch_hdmi.c file is simply included by patch_intelhdmi.c
and patch_nvhdmi.c, and does not represent a real codec.

There are no behavior changes to intelhdmi. However nvhdmi made several
changes when copying code out of intelhdmi, which are all reverted in
this patch. Wei Ni confirmed that the reverted code actually works fine.

Tested-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
11 years agomsi-laptop: depends on RFKILL
Randy Dunlap [Wed, 3 Feb 2010 22:24:28 +0000 (14:24 -0800)]
msi-laptop: depends on RFKILL

msi-laptop uses rfkill*() interfaces so it should depend on RFKILL.

msi-laptop.c:(.text+0x1fcd1b): undefined reference to `rfkill_alloc'
msi-laptop.c:(.text+0x1fcd76): undefined reference to `rfkill_register'
msi-laptop.c:(.text+0x1fcdc8): undefined reference to `rfkill_destroy'
msi-laptop.c:(.text+0x1fcdd9): undefined reference to `rfkill_unregister'

This repairs "msi-laptop: Detect 3G device exists by standard ec command",
which is in some gregkh tree.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agomsi-laptop: Detect 3G device exists by standard ec command
Lee, Chun-Yi [Wed, 27 Jan 2010 04:23:00 +0000 (12:23 +0800)]
msi-laptop: Detect 3G device exists by standard ec command

Detect 3G device exists by standard ec command. Driver will not create the threeg sysfs
file and threeg rfkill interface if there have no internal 3G device in MSI notebook/netbook.

Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agomsi-laptop: Add resume method for set the SCM load again
Lee, Chun-Yi [Tue, 26 Jan 2010 16:13:45 +0000 (00:13 +0800)]
msi-laptop: Add resume method for set the SCM load again

Implement the resume method for set the load SCM flag after system reusme.
Without this patch, the wifi function key on SCM model will back to BIOS
control mode then confuse with the userland software control.
e.g. MSI N034

Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agomsi-laptop: Support some MSI 3G netbook that is need load SCM
Lee, Chun-Yi [Thu, 21 Jan 2010 16:15:59 +0000 (00:15 +0800)]
msi-laptop: Support some MSI 3G netbook that is need load SCM

Some MSI 3G netbook only have one fn key to control Wlan/Bluetooth/3G,
those netbook will load the SCM (windows app) to disable the original
Wlan/Bluetooth control by BIOS when user press fn key, then control
Wlan/Bluetooth/3G by SCM (software control by OS). Without SCM, user
cann't on/off 3G module on those 3G netbook.
On Linux, msi-laptop driver will do the same thing to disable the
original BIOS control, then might need use HAL or other userland
application to do the software control that simulate with SCM.
e.g. MSI N034 netbook

Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agomsi-laptop: Add threeg sysfs file for support query 3G state by standard 66/62 ec...
Lee, Chun-Yi [Sat, 9 Jan 2010 15:17:07 +0000 (23:17 +0800)]
msi-laptop: Add threeg sysfs file for support query 3G state by standard 66/62 ec command

Add threeg sysfs file for support query 3G state by standard 66/62 ec
command, the MSI standard ec interface supported this feature.

Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agomsi-laptop: Support standard ec 66/62 command on MSI notebook and nebook
Lee, Chun-Yi [Sat, 9 Jan 2010 13:16:52 +0000 (21:16 +0800)]
msi-laptop: Support standard ec 66/62 command on MSI notebook and nebook

Suppport standard ec 66/62 command on MSI notebook and nebook. MSI
netbook and notebook already support 66/62 command, so, add new
get_state function, and put the old model to non-standard model, but
driver still support those old model.

Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agoDriver core: create lock/unlock functions for struct device
Greg Kroah-Hartman [Wed, 17 Feb 2010 18:57:05 +0000 (10:57 -0800)]
Driver core: create lock/unlock functions for struct device

In the future, we are going to be changing the lock type for struct
device (once we get the lockdep infrastructure properly worked out)  To
make that changeover easier, and to possibly burry the lock in a
different part of struct device, let's create some functions to lock and
unlock a device so that no out-of-core code needs to be changed in the
future.

This patch creates the device_lock/unlock/trylock() functions, and
converts all in-tree users to them.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Phil Carmody <ext-phil.2.carmody@nokia.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Cc: Magnus Damm <damm@igel.co.jp>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Alex Chiang <achiang@hp.com>
Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrew Patterson <andrew.patterson@hp.com>
Cc: Yu Zhao <yu.zhao@intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: CHENG Renquan <rqcheng@smu.edu.sg>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Frans Pop <elendil@planet.nl>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agosysfs: fix for thinko with sysfs_bin_attr_init()
Stephen Rothwell [Mon, 1 Mar 2010 09:38:36 +0000 (20:38 +1100)]
sysfs: fix for thinko with sysfs_bin_attr_init()

After merging the final tree, today's linux-next build (powerpc
allyesconfig) failed like this:

drivers/pci/pci-sysfs.c: In function 'pci_create_legacy_files':
drivers/pci/pci-sysfs.c:645: error: lvalue required as unary '&' operand
drivers/pci/pci-sysfs.c:658: error: lvalue required as unary '&' operand

Caused by commit "sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on
dynamic attributes" interacting with commit "sysfs: Use one lockdep
class per sysfs attribute") both from the driver-core tree.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agosysfs: Kill unused sysfs_sb variable.
Eric W. Biederman [Sat, 13 Feb 2010 03:22:28 +0000 (19:22 -0800)]
sysfs: Kill unused sysfs_sb variable.

Now that there are no more users we can remove
the sysfs_sb variable.

Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agosysfs: Pass super_block to sysfs_get_inode
Eric W. Biederman [Sat, 13 Feb 2010 03:22:27 +0000 (19:22 -0800)]
sysfs: Pass super_block to sysfs_get_inode

Currently sysfs_get_inode magically returns an inode on
sysfs_sb.  Make the super_block parameter explicit and
the code becomes clearer.

Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agodriver core: Use sysfs_rename_link in device_rename
Eric W. Biederman [Sat, 13 Feb 2010 03:22:26 +0000 (19:22 -0800)]
driver core: Use sysfs_rename_link in device_rename

Don't open code the renaming of symlinks in sysfs
instead use the new helper function sysfs_rename_link

Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agosysfs: Implement sysfs_rename_link
Eric W. Biederman [Sat, 13 Feb 2010 03:22:25 +0000 (19:22 -0800)]
sysfs: Implement sysfs_rename_link

Because of rename ordering problems we occassionally give false
warnings about invalid sysfs operations.  So using sysfs_rename
create a sysfs_rename_link function that doesn't need strange
workarounds.

Cc: Benjamin Thery <benjamin.thery@bull.net>
Cc: Daniel Lezcano <dlezcano@fr.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agosysfs: Pack sysfs_dirent more tightly.
Eric W. Biederman [Sat, 13 Feb 2010 03:22:24 +0000 (19:22 -0800)]
sysfs: Pack sysfs_dirent more tightly.

Placing the 16bit s_mode between a pointer and a long doesn't pack well
especailly on 64bit where we wast 48 bits.  So move s_mode and
declare it as a unsigned short.  This is the sysfs backing store
after all we don't need fields extra large just in case someday
we want userspace to be able to use a larger value.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agosysfs: Serialize updates to the vfs inode
Eric W. Biederman [Sat, 13 Feb 2010 03:22:23 +0000 (19:22 -0800)]
sysfs: Serialize updates to the vfs inode

The vfs depends upon filesystem methods to update the
vfs inode.   Sysfs adds to the normal number of places
where the vfs inode is updated by also updatng the
vfs inode in sysfs_refresh_inode.

Typically the inode mutex is used to serialize updates
to the vfs inode, but grabbing the inode mutex in
sysfs_permission and sysfs_getattr causes deadlocks,
because sometimes the vfs calls those operations with
the inode mutex held.  Therefore sysfs  can not use the
inode mutex to serial updates to the vfs inode.

The sysfs_mutex is acquired in all of the routines
where sysfs updates the vfs inode, and with a small
change we can consistently protext sysfs vfs inode
updates with the sysfs_mutex. To protect the sysfs
vfs inode updates with the sysfs_mutex simply requires
extending the scope of sysfs_mutex in sysfs_setattr
over inode_setattr, and over inode_change_ok (so we
have an unchanging inode when we perform the check).

Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agosysfs: windfarm: init sysfs attributes
Johannes Berg [Sat, 20 Feb 2010 15:43:02 +0000 (16:43 +0100)]
sysfs: windfarm: init sysfs attributes

This is required for lockdep.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agosysfs: Use sysfs_attr_init and sysfs_bin_attr_init on module dynamic attributes
Eric W. Biederman [Fri, 12 Feb 2010 21:41:56 +0000 (13:41 -0800)]
sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on module dynamic attributes

A little more whack-a-mole annotating the dynamic sysfs attributes.  I
had everything built into my earlier test kernel, and so I missed
these.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agosysfs: Document sysfs_attr_init and sysfs_bin_attr_init
Eric W. Biederman [Fri, 12 Feb 2010 12:35:32 +0000 (04:35 -0800)]
sysfs: Document sysfs_attr_init and sysfs_bin_attr_init

I have added a new requirement to the external sysfs interface
that dynamically allocated sysfs attributes must call sysfs_attr_init
if lockdep is enabled.  For the time being callying sysfs_attr_init
is only mandatory if lockdep is enabled, so we can live with a few
unconverted instances until we find them all.  As this is part of
the public interface of sysfs it is a good idea to document these
pseudo functions so someone inspeciting the code can find out
what has happened.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agosysfs: Use sysfs_attr_init and sysfs_bin_attr_init on dynamic attributes
Eric W. Biederman [Thu, 11 Feb 2010 23:23:05 +0000 (15:23 -0800)]
sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on dynamic attributes

These are the non-static sysfs attributes that exist on
my test machine.  Fix them to use sysfs_attr_init or
sysfs_bin_attr_init as appropriate.   It simply requires
making a sysfs attribute present to see this.  So this
is a little bit tedious but otherwise not too bad.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agosysfs: Use one lockdep class per sysfs attribute.
Eric W. Biederman [Thu, 11 Feb 2010 23:21:53 +0000 (15:21 -0800)]
sysfs: Use one lockdep class per sysfs attribute.

Acknowledge that the logical sysfs rwsem has one instance per
sysfs attribute with different locking depencencies for different
attributes.

There is a sysfs idiom where writing to one sysfs file causes the
addition or removal of other sysfs files.   Lumping all of the
sysfs attributes together in one lock class causes lockdep to
generate lots of false positives.

This introduces the requirement that non-static sysfs attributes
need to be initialized with sysfs_attr_init or sysfs_bin_attr_init.
Strictly speaking this requirement only exists when lockdep is
enabled, and when lockdep is enabled we get a bit fat warning
if this requirement is not met.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agosysfs: Only take active references on attributes.
Eric W. Biederman [Thu, 11 Feb 2010 23:20:00 +0000 (15:20 -0800)]
sysfs: Only take active references on attributes.

If we exclude directories and symlinks from the set of sysfs
dirents where we need active references we are left with
sysfs attributes (binary or not).

- Tweak sysfs_deactivate to only do something on attributes
- Move lockdep initialization into sysfs_file_add_mode to
  limit it to just attributes.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agosysfs: Remove sysfs_get/put_active_two
Eric W. Biederman [Thu, 11 Feb 2010 23:18:38 +0000 (15:18 -0800)]
sysfs: Remove sysfs_get/put_active_two

It turns out that holding an active reference on a directory is
pointless.  The purpose of the active references are to allows us to
block when removing sysfs entries that have custom methods so we don't
remove modules while running modular code and to keep those custom
methods from accessing data structures after the files have been
removed.  Further sysfs_remove_dir remove all elements in the
directory before removing the directory itself, so there is no chance
we will remove a directory with active children.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agoDriver core: Fix first line of kernel-doc for a few functions
Ben Hutchings [Sun, 14 Feb 2010 14:18:53 +0000 (14:18 +0000)]
Driver core: Fix first line of kernel-doc for a few functions

The function name must be followed by a space, hypen, space, and a
short description.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agoUIO: Remove SMX Cryptengine driver
Hans J. Koch [Wed, 10 Feb 2010 19:12:42 +0000 (20:12 +0100)]
UIO: Remove SMX Cryptengine driver

Ben Nizette, the author of this driver, told me in a private mail that this
project has been cancelled. He suggested to remove the driver for now, and
will come back with a new version should the hardware really exist.
This patch completely removes the driver.

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Acked-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agoUIO: minor Kconfig fixes
John Ogness [Thu, 11 Feb 2010 14:38:53 +0000 (15:38 +0100)]
UIO: minor Kconfig fixes

Two trivial fixes for the Userspace IO Kconfig file:
1) uio_sercos3 is a PCI driver, so let it depend on PCI.
2) "default n" under UIO_PCI_GENERIC is luxury since it is already the default.

Acked-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agoUIO: Add a driver for Hilscher netX-based fieldbus cards
Hans J. Koch [Tue, 9 Feb 2010 19:13:49 +0000 (20:13 +0100)]
UIO: Add a driver for Hilscher netX-based fieldbus cards

This patch adds a Userspace IO driver for netX-based fieldbus cards by
Hilscher (see http://www.hilscher.com). ATM, cifX and comX cards are
supported. The userspace part for this driver is provided by Hilscher
and should come with the card.
The driver is in use for several months now and has been tested by
people at Hilscher and Linutronix.

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agoauxdisplay: move cfag12864bfb's probe function to .devinit.text
Uwe Kleine-König [Thu, 4 Feb 2010 19:56:56 +0000 (20:56 +0100)]
auxdisplay: move cfag12864bfb's probe function to .devinit.text

A pointer to cfag12864bfb_probe is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded.  Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.

An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avuton Olrich <avuton@gmail.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agomedia: move omap24xxcam's probe function to .devinit.text
Uwe Kleine-König [Thu, 4 Feb 2010 19:56:55 +0000 (20:56 +0100)]
media: move omap24xxcam's probe function to .devinit.text

A pointer to omap24xxcam_probe is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded.  Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.

An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Acked-by: Trilok Soni <soni.trilok@gmail.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agow1: move omap_hdq's probe function to .devinit.text
Uwe Kleine-König [Thu, 4 Feb 2010 19:56:54 +0000 (20:56 +0100)]
w1: move omap_hdq's probe function to .devinit.text

A pointer to omap_hdq_probe is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded.  Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.

An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Stanley.Miao <stanley.miao@windriver.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agoi2c: move i2c_omap's probe function to .devinit.text
Uwe Kleine-König [Thu, 4 Feb 2010 19:56:53 +0000 (20:56 +0100)]
i2c: move i2c_omap's probe function to .devinit.text

A pointer to omap_i2c_probe is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded.  Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.

An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: chandra shekhar <x0044955@ti.com>
Cc: Jason P Marini <jason.marini@gmail.com>
Cc: Syed Mohammed Khasim <x0khasim@ti.com>
Cc: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: Juha Yrjola <juha.yrjola@solidboot.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agox86: move hp-wmi's probe function to .devinit.text
Uwe Kleine-König [Thu, 4 Feb 2010 19:56:52 +0000 (20:56 +0100)]
x86: move hp-wmi's probe function to .devinit.text

A pointer to hp_wmi_bios_setup is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded.  Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.

An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Frans Pop <elendil@planet.nl>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agoplatform-drivers: move probe to .devinit.text in drivers/video
Uwe Kleine-König [Thu, 4 Feb 2010 19:56:51 +0000 (20:56 +0100)]
platform-drivers: move probe to .devinit.text in drivers/video

A pointer to a probe callback is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded.  Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.

An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: Alberto Mardegan <mardy@users.sourceforge.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andriy Skulysh <askulysh@gmail.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Chandramouli Narayanan <mouli@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Frans Pop <elendil@planet.nl>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ian Molton <spyro@f2s.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Kaj-Michael Lang <milang@tal.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: linux-fbdev-devel@lists.sourceforge.net
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Magnus Damm <damm@igel.co.jp>
Cc: Martin Michlmayr <tbm@cyrius.com>
Cc: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Pavel Machek <pavel@suse.cz>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Roel Kluin <roel.kluin@gmail.com>
Cc: Roland Stigge <stigge@antcom.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vincent Sanders <vince@simtec.co.uk>
Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: James Simmons <jsimmons@infradead.org>
Acked-by: Peter Jones <pjones@redhat.com>
Acked-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agoplatform-drivers: move probe to .devinit.text in drivers/scsi
Uwe Kleine-König [Thu, 4 Feb 2010 19:56:50 +0000 (20:56 +0100)]
platform-drivers: move probe to .devinit.text in drivers/scsi

A pointer to a probe callback is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded.  Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.

An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
Cc: Henrik Kretzschmar <henne@nachtwindheim.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: peter fuerst <post@pfrst.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agoplatform-drivers: move probe to .devinit.text in arch/arm
Uwe Kleine-König [Thu, 4 Feb 2010 19:56:49 +0000 (20:56 +0100)]
platform-drivers: move probe to .devinit.text in arch/arm

A pointer to a probe callback is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded.  Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.

An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Cc: Paul Sokolovsky <pmiscml@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agoDriver core: make struct platform_driver.id_table const
Uwe Kleine-König [Tue, 26 Jan 2010 08:35:00 +0000 (09:35 +0100)]
Driver core: make struct platform_driver.id_table const

This fixes a warning on several pxa based machines:

arch/arm/mach-pxa/ssp.c:475: warning: initialization discards qualifiers from pointer target type

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Vikram Dhillon <dhillonv10@gmail.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agoDriver core: Constify struct sysfs_ops in struct kobj_type
Emese Revfy [Tue, 19 Jan 2010 01:58:23 +0000 (02:58 +0100)]
Driver core: Constify struct sysfs_ops in struct kobj_type

Constify struct sysfs_ops.

This is part of the ops structure constification
effort started by Arjan van de Ven et al.

Benefits of this constification:

 * prevents modification of data that is shared
   (referenced) by many other structure instances
   at runtime

 * detects/prevents accidental (but not intentional)
   modification attempts on archs that enforce
   read-only kernel data at runtime

 * potentially better optimized code as the compiler
   can assume that the const data cannot be changed

 * the compiler/linker move const data into .rodata
   and therefore exclude them from false sharing

Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: David Teigland <teigland@redhat.com>
Acked-by: Matt Domsch <Matt_Domsch@dell.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agosysdev: fix up the probe/release attributes
Greg Kroah-Hartman [Thu, 21 Jan 2010 23:07:59 +0000 (15:07 -0800)]
sysdev: fix up the probe/release attributes

These should be sysdev attributes, not class attributes.  This patch
should resolve the problem.

Thanks to Stephen Rothwell for pointing out the problem.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agoHOWTO: Updates on subsystem trees, patchwork, -next (vs. -mm)
Stefan Richter [Fri, 15 Jan 2010 12:23:51 +0000 (13:23 +0100)]
HOWTO: Updates on subsystem trees, patchwork, -next (vs. -mm)

One of the roles which -mm fulfilled some time ago (to offer an
integration testing ground) has been taken over by -next.  This is still
news to Documentation/HOWTO, so mention it there.

Also add a word on how patchwork is used to track patches as they make
their way into subsystem trees.  Remove some arbitrary links to
subsystem repositories; they can all be found in the MAINTAINERS
database.

Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agokobject: Constify struct kset_uevent_ops
Emese Revfy [Thu, 31 Dec 2009 13:52:51 +0000 (14:52 +0100)]
kobject: Constify struct kset_uevent_ops

Constify struct kset_uevent_ops.

This is part of the ops structure constification
effort started by Arjan van de Ven et al.

Benefits of this constification:

 * prevents modification of data that is shared
   (referenced) by many other structure instances
   at runtime

 * detects/prevents accidental (but not intentional)
   modification attempts on archs that enforce
   read-only kernel data at runtime

 * potentially better optimized code as the compiler
   can assume that the const data cannot be changed

 * the compiler/linker move const data into .rodata
   and therefore exclude them from false sharing

Signed-off-by: Emese Revfy <re.emese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agodriver-core: firmware_class: remove base.h header inclusion
Luis R. Rodriguez [Thu, 14 Jan 2010 02:18:15 +0000 (21:18 -0500)]
driver-core: firmware_class: remove base.h header inclusion

base.h is used by base drivers for sharing internal structures.
Turns out firmware_class does not depend on it at all so remove it.

Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agosysfs: Cache the last sysfs_dirent to improve readdir scalability v2
Eric W. Biederman [Fri, 1 Jan 2010 22:43:53 +0000 (14:43 -0800)]
sysfs: Cache the last sysfs_dirent to improve readdir scalability v2

When sysfs_readdir stops short we now cache the next
sysfs_dirent to return to user space in filp->private_data.
There is no impact on the rest of sysfs by doing this and
in the common case it allows us to pick up exactly where
we left off with no seeking.

Additionally I drop and regrab the sysfs_mutex around
filldir to avoid a page fault abritrarily increasing the
hold time on the sysfs_mutex.

v2: Returned to using INT_MAX as the EOF condition.
    seekdir is ambiguous unless all directory entries have
    a unique f_pos value.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14949

Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
11 years agoDriver-Core: require valid action string in uevent trigger
Kay Sievers [Thu, 14 Jan 2010 21:54:37 +0000 (22:54 +0100)]
Driver-Core: require valid action string in uevent trigger

No longer fall back to "add" and warn, but always require a valid
action-string written to the "uevent" file.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>