pandora-kernel.git
16 years ago[NETDEV] config: revert part of previous patch
Randy Dunlap [Tue, 26 Sep 2006 06:11:21 +0000 (23:11 -0700)]
[NETDEV] config: revert part of previous patch

Net devices should depend on NETDEVICES, so revert part of
Paolo's previous patch.

See http://marc.theaimsgroup.com/?l=linux-kernel&m=115566326218740&w=2
for history.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IRDA] via-ircc: fix memory leak
Chuck Short [Tue, 26 Sep 2006 05:31:03 +0000 (22:31 -0700)]
[IRDA] via-ircc: fix memory leak

Fix memory leak.

Coverity id# 653

patch location:
http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-dapper.git;a=commitdiff;h=a1f34cb68b16807ed9d5ebb0f6a6ec5ff8a5fc78

Signed-off-by: Chuck Short <zulcss@gmail.com>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV6]: bh_lock_sock_nested on tcp_v6_rcv
Fabio Olive Leite [Tue, 26 Sep 2006 05:28:47 +0000 (22:28 -0700)]
[IPV6]: bh_lock_sock_nested on tcp_v6_rcv

A while ago Ingo patched tcp_v4_rcv on net/ipv4/tcp_ipv4.c to use
bh_lock_sock_nested and silence a lock validator warning. This fixed
it for IPv4, but recently I saw a report of the same warning on IPv6.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/hwmon-2.6
Linus Torvalds [Thu, 28 Sep 2006 23:23:27 +0000 (16:23 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/hwmon-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/hwmon-2.6: (39 commits)
  hwmon: Remove Yuan Mu's address
  hwmon: Fix unchecked return status, SMSC chips
  hwmon: Fix unchecked return status, batch 6
  w83792d: Fix unchecked return status
  w83l785ts: Fix unchecked return status
  w83781d: Fix unchecked return status
  vt8231: Fix unchecked return status
  Fix unchecked return status, batch 5
  hwmon: Fix unchecked return status, batch 4
  hwmon: Fix unchecked return status, batch 3
  hwmon: Fix unchecked return status, batch 2
  w83627ehf: Fix unchecked return status
  pc87360: Check for error on sysfs files creation
  pc87360: Delete sysfs files on device deletion
  pc87360: Move some code around
  hwmon: Fix unchecked return status, batch 1
  vt1211: Document module parameters
  vt1211: Add documentation
  hwmon: New driver for the VIA VT1211
  w83791d: Documentation update
  ...

16 years agoUSB: g_file_storage: Set sense info Valid bit only when needed
Alan Stern [Tue, 26 Sep 2006 18:51:48 +0000 (14:51 -0400)]
USB: g_file_storage: Set sense info Valid bit only when needed

Strictly speaking, the Valid bit in SCSI sense data is supposed to
be set only when the Information field contains a valid number.  This
patch (as793) turns off the Valid bit when the Information field
hasn't been set.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB: fix autosuspend when CONFIG_PM isn't set
Alan Stern [Tue, 26 Sep 2006 18:50:20 +0000 (14:50 -0400)]
USB: fix autosuspend when CONFIG_PM isn't set

This patch (as791b) fixes things up to avoid compiler warnings or
errors when CONFIG_USB_SUSPEND or CONFIG_PM isn't set.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoOHCI: add auto-stop support
Alan Stern [Tue, 26 Sep 2006 18:46:16 +0000 (14:46 -0400)]
OHCI: add auto-stop support

This patch (as790b) adds "autostop" support to ohci-hcd: the driver
will automatically stop the host controller when no devices have been
connected for at least one second.  This feature is useful when the
USB autosuspend facility isn't available, such as when
CONFIG_USB_SUSPEND hasn't been set.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoOHCI: remove existing autosuspend code
Alan Stern [Mon, 25 Sep 2006 19:41:21 +0000 (15:41 -0400)]
OHCI: remove existing autosuspend code

The autosuspend technique used by ohci-hcd doesn't mesh well with the
newer USB core autosuspend code.  This patch (as789) removes ohci-hcd's
autosuspend support.  Now the driver will be usable, but it won't
automatically go into a low-power state when no devices are connected.
That's for a later patch.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB: allow both root-hub interrupts and polling
Alan Stern [Mon, 25 Sep 2006 19:41:12 +0000 (15:41 -0400)]
USB: allow both root-hub interrupts and polling

Originally I didn't think any host controller driver would ever use
interrupts and polling at the same time, but it turns out ohci-hcd wants
to do exactly that.  This patch (as788) makes it possible.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB: g_file_storage: fix "ignoring return value" warnings
Alan Stern [Mon, 25 Sep 2006 18:31:15 +0000 (14:31 -0400)]
USB: g_file_storage: fix "ignoring return value" warnings

This patch (as792) fixes "ignoring return value" warnings in
file_storage.c.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB: dummy-hcd: fix "warn-unused-result" messages
Alan Stern [Mon, 25 Sep 2006 15:55:56 +0000 (11:55 -0400)]
USB: dummy-hcd: fix "warn-unused-result" messages

This patch (as758) fixes the "warn-unused-result" messages in dummy-hcd.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB: create new workqueue thread for USB autosuspend
Alan Stern [Tue, 19 Sep 2006 14:14:07 +0000 (10:14 -0400)]
USB: create new workqueue thread for USB autosuspend

This patch (as787) creates a new workqueue thread to handle delayed
USB autosuspend requests.  Previously the code used keventd.  However
it turns out that the hub driver's suspend routine calls
flush_scheduled_work(), making it a poor candidate for running in
keventd (the call immediately deadlocks).  The solution is to use a
new thread instead of keventd.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB Storage: unusual_devs.h entry for Sony Ericsson P990i
Jan Mate [Tue, 26 Sep 2006 00:00:57 +0000 (17:00 -0700)]
USB Storage: unusual_devs.h entry for Sony Ericsson P990i

USB Storage: this patch adds support for Sony Ericsson P990i

Signed-off-by: Jan Mate <mate@fiit.stuba.sk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB: microtek usb scanner: Scsi_Cmnd conversion
Henrik Kretzschmar [Tue, 26 Sep 2006 00:00:58 +0000 (17:00 -0700)]
USB: microtek usb scanner: Scsi_Cmnd conversion

Converts obsolete typedef'd Scsi_Cmnd into struct scsi_cmnd.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB: fixes kerneldoc errors in usbcore-auto(susp/res)-patch
Henrik Kretzschmar [Tue, 26 Sep 2006 00:00:56 +0000 (17:00 -0700)]
USB: fixes kerneldoc errors in usbcore-auto(susp/res)-patch

Fixes kerneldoc errors on usb/core/driver.c, which occured in 2.6.18-rc6-mm2
gregkh-usb-usbcore-add-autosuspend-autoresume-infrastructure.patch

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB: add Raritan KVM USB Dongle to the HID_QUIRK_NOGET blacklist
Raghavendra Biligiri [Fri, 15 Sep 2006 14:23:35 +0000 (19:53 +0530)]
USB: add Raritan KVM USB Dongle to the HID_QUIRK_NOGET blacklist

During Installation the host tries to enumerate the keyboard/mouse
dongle for the Raritan KVM.At this time timeouts have been observed
Adding the Raritan KVM USB dongle to the blacklist fixes this issue.

Signed-off-by: Raghavendra Biligiri <Raghavendra_Biligiri@Dell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB: asix - Add alternate device IDs for Dlink DUB-E100 Rev B1
David Hollis [Thu, 21 Sep 2006 12:09:29 +0000 (08:09 -0400)]
USB: asix - Add alternate device IDs for Dlink DUB-E100 Rev B1

Add alternate device IDs for Dlink DUB-E100 Rev B1

Signed-off-by: David Hollis <dhollis@davehollis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agousb-serial: possible irq lock inversion (PPP vs. usb/serial)
Peter Zijlstra [Mon, 25 Sep 2006 10:51:41 +0000 (12:51 +0200)]
usb-serial: possible irq lock inversion (PPP vs. usb/serial)

=========================================================
[ INFO: possible irq lock inversion dependency detected ]

16 years agoohci: Use ref-counting hotplug safe interfaces
Alan Cox [Wed, 27 Sep 2006 22:43:22 +0000 (15:43 -0700)]
ohci: Use ref-counting hotplug safe interfaces

We want to avoid legacy APIs like pci_find_slot().

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB: Fix alignment of buffer passed down to ->hub_control()
Mikael Pettersson [Sun, 24 Sep 2006 00:05:31 +0000 (17:05 -0700)]
USB: Fix alignment of buffer passed down to ->hub_control()

Implementations assume the buffer is at least 4 byte aligned.

Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB: add SeaLevel 2106 SeaLINK support to ftdi_sio
Justin Carlson [Sun, 24 Sep 2006 08:52:12 +0000 (11:52 +0300)]
USB: add SeaLevel 2106 SeaLINK support to ftdi_sio

We have a couple of these USB-Serial converters around; they're slightly
different from the 2104 models in that they can handle 500Kb/sec over RS422.
The existing ftdi driver seems to work just fine if we add in the
appropriate IDs.

Patch is against 2.6.17.6, but should apply cleanly to pretty much
anything recent.

From: Justin Carlson <justinca@qatar.cmu.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB: New PhidgetKit 8/8/8 reset outputs after 2 seconds
Sean Young [Sun, 24 Sep 2006 19:26:57 +0000 (19:26 +0000)]
USB: New PhidgetKit 8/8/8 reset outputs after 2 seconds

New phidget interface kits (type 8/8/8) reset their outputs if they
haven't received a set report for 2 seconds.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB: another device ID for ipaq
Matthias Urlichs [Sun, 24 Sep 2006 19:38:47 +0000 (21:38 +0200)]
USB: another device ID for ipaq

Add yet another device ID to the ipaq USB-serial driver.

Signed-Off-By: Matthias Urlichs <matthias@urlichs.de>
Cc: Ganesh Varadarajan <ganesh@veritas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB serial ftdi_sio: Add support for Tactrix OpenPort devices
Ian Abbott [Mon, 25 Sep 2006 13:19:19 +0000 (14:19 +0100)]
USB serial ftdi_sio: Add support for Tactrix OpenPort devices

This patch adds support for three OpenPort ECU data cables from Tactrix
Inc. to the ftdi_sio driver's device ID table.  One of the PIDs was
supplied by Donour Sizemore on the ftdi-usb-sio-devel mailing list.  The
other two were added by myself after examining the Windows driver software.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB: Pegasus driver failing for ADMtek 8515 network device
Petko Manolov [Wed, 27 Sep 2006 21:25:37 +0000 (14:25 -0700)]
USB: Pegasus driver failing for ADMtek 8515 network device

Address http://bugzilla.kernel.org/show_bug.cgi?id=7126

Attempting to read the ethernet ID directly from the eeprom somehow
confuses ADM8515.  Subsequent read requests to either the eeprom or the MII
fail as well.  Didn't dig much deeper, though.  For example ADM8513 does
not experience this problem.

I used the fact that at power up the device is reading its ID automatically
(not true for older Pegasus based devices) and put it in the Ethernet ID
registers.  So now the driver uses get_registers() instead of
read_eprom_word() if the device is Pegasus_II based one.  Tested it with
all (Pegasus and Pegasus_II) gadgets i have and everything seems ok.

Cc: <jogeedaklown@yahoo.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB: unusual-devs entry for Nokia E60
Alan Stern [Thu, 28 Sep 2006 16:11:56 +0000 (12:11 -0400)]
USB: unusual-devs entry for Nokia E60

This patch (as794) adds an unusual_devs entry for the Nokia E60.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB: Add vendor / product ID to pl2303
Wesley PA4WDH [Thu, 28 Sep 2006 18:45:38 +0000 (20:45 +0200)]
USB: Add vendor / product ID to pl2303

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoUSB: new id for kaweth
Oliver Neukum [Thu, 28 Sep 2006 20:21:19 +0000 (22:21 +0200)]
USB: new id for kaweth

this adds a new id to the kaweth driver.
Please apply.

Signed-Off-By: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agohwmon: Remove Yuan Mu's address
Jean Delvare [Sun, 24 Sep 2006 19:25:52 +0000 (21:25 +0200)]
hwmon: Remove Yuan Mu's address

hwmon: Remove Yuan Mu's address

Yuan Mu no longer works at Winbond.

I wish to publicly thank Yuan for his help with Winbond hardware
monitoring chips support during the past 10 months.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agohwmon: Fix unchecked return status, SMSC chips
Jean Delvare [Sun, 24 Sep 2006 19:25:12 +0000 (21:25 +0200)]
hwmon: Fix unchecked return status, SMSC chips

hwmon: Fix unchecked return status, SMSC chips

Fix up 2 more hwmon drivers so that they no longer ignore return
status from device_create_file().

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agohwmon: Fix unchecked return status, batch 6
Jean Delvare [Sun, 24 Sep 2006 19:24:46 +0000 (21:24 +0200)]
hwmon: Fix unchecked return status, batch 6

hwmon: Fix unchecked return status, batch 6

Fix up 5 more hwmon drivers so that they no longer ignore return status
from device_create_file().

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agow83792d: Fix unchecked return status
Rudolf Marek [Sun, 24 Sep 2006 19:24:12 +0000 (21:24 +0200)]
w83792d: Fix unchecked return status

w83792d: Fix unchecked return status

Fix the w83792d driver. Add error checking to device_create_file
and also care to destroy the files upon exit.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agow83l785ts: Fix unchecked return status
Rudolf Marek [Sun, 24 Sep 2006 19:23:26 +0000 (21:23 +0200)]
w83l785ts: Fix unchecked return status

w83l785ts: Fix unchecked return status

Fix the w83l785ts driver. Add error checking to device_create_file
and also care to destroy the files upon exit.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agow83781d: Fix unchecked return status
Jim Cromie [Sun, 24 Sep 2006 19:22:52 +0000 (21:22 +0200)]
w83781d: Fix unchecked return status

w83781d: Fix unchecked return status

Add 2 attr-file groups (for base and model-specific attrs respectively),
create the base group with single call to sysfs_create_group,
check the return code on individual calls to device_create_file for each
of the model-specific attr-files.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agovt8231: Fix unchecked return status
Roger Lucas [Sun, 24 Sep 2006 19:21:46 +0000 (21:21 +0200)]
vt8231: Fix unchecked return status

vt8231: Fix unchecked return status

Check the return status from device_create_file() and also use
the newer and cleaner sysfs creation functions.

Signed-off-by: Roger Lucas <roger@planbit.co.uk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoFix unchecked return status, batch 5
Jean Delvare [Sun, 24 Sep 2006 19:17:13 +0000 (21:17 +0200)]
Fix unchecked return status, batch 5

hwmon: Fix unchecked return status, batch 5

Fix up some hwmon drivers so that they no longer ignore return status
from device_create_file().

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agohwmon: Fix unchecked return status, batch 4
Jean Delvare [Sun, 24 Sep 2006 19:16:40 +0000 (21:16 +0200)]
hwmon: Fix unchecked return status, batch 4

hwmon: Fix unchecked return status, batch 4

Fix up some hwmon drivers so that they no longer ignore return status
from device_create_file().

Note: f71805f actually checked the status from device_create_file
already. However it did not remove the files on device destruction.
It was also an opportunity to use sysfs_create/remove_group instead
of hand-made loops. This makes the changes much more important but
I think the result is worth it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agohwmon: Fix unchecked return status, batch 3
Mark M. Hoffman [Sun, 24 Sep 2006 19:15:35 +0000 (21:15 +0200)]
hwmon: Fix unchecked return status, batch 3

hwmon: Fix unchecked return status, batch 3

Fix up some hwmon drivers so that they no longer ignore return status
from device_create_file().

Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agohwmon: Fix unchecked return status, batch 2
Mark M. Hoffman [Sun, 24 Sep 2006 19:14:35 +0000 (21:14 +0200)]
hwmon: Fix unchecked return status, batch 2

hwmon: Fix unchecked return status, batch 2

Fix up some hwmon drivers so that they no longer ignore return status
from device_create_file().

Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agow83627ehf: Fix unchecked return status
David Hubbard [Sun, 24 Sep 2006 19:04:38 +0000 (21:04 +0200)]
w83627ehf: Fix unchecked return status

w83627ehf: Fix unchecked return status

Fix: check return value from device_create_file()
Fix: call device_remove_file() on error and module unload
Fix: call hwmon_device_register() after device_create_file() to eliminate race

Signed-off-by: David Hubbard <david.c.hubbard@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agopc87360: Check for error on sysfs files creation
Jim Cromie [Sun, 24 Sep 2006 19:03:25 +0000 (21:03 +0200)]
pc87360: Check for error on sysfs files creation

pc87360: Check for error on sysfs files creation

Use sysfs_create_group() for 2 sensor-types which are chip-model
invariant, i.e. all-or-nothing attribute groups.
Other 2 groups vary too much due to configuration, etc, so we keep the
loops of device_create_file(), but now check their returns.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agopc87360: Delete sysfs files on device deletion
Jim Cromie [Sun, 24 Sep 2006 19:02:44 +0000 (21:02 +0200)]
pc87360: Delete sysfs files on device deletion

pc87360: Delete sysfs files on device deletion

Add 4 explicit attribute groups for the 5 sensor types:
voltage (in), therm, temp, and fan & pwm (together in one group).
Use sysfs_remove_group() to drop them, but keeps the existing
startup code, which calls device_create_file in loops.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agopc87360: Move some code around
Jim Cromie [Sun, 24 Sep 2006 19:01:56 +0000 (21:01 +0200)]
pc87360: Move some code around

pc87360: Move some code around

Moves code for get-set-decl tuples for 3 items: cpu0_vid, vrm, alarms_in
up, to just after the get-set-decl tuple for voltages.
These items are already 'activated' together with the rest of the
voltage attributes, so the move tightens the grouping that's made
explicit in next patch.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agohwmon: Fix unchecked return status, batch 1
Mark M. Hoffman [Sun, 24 Sep 2006 18:59:49 +0000 (20:59 +0200)]
hwmon: Fix unchecked return status, batch 1

hwmon: Fix unchecked return status, batch 1

Fix up some hwmon drivers so that they no longer ignore return status
from device_create_file().

Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agovt1211: Document module parameters
Juerg Haefliger [Sun, 24 Sep 2006 18:55:34 +0000 (20:55 +0200)]
vt1211: Document module parameters

vt1211: Document module parameters

Add a description of the module parameters to the documentation of
the vt1211 driver.

Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agovt1211: Add documentation
Juerg Haefliger [Sun, 24 Sep 2006 18:54:46 +0000 (20:54 +0200)]
vt1211: Add documentation

vt1211: Add documentation

Add documentation for the new vt1211 hardware monitoring driver.

Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agohwmon: New driver for the VIA VT1211
Juerg Haefliger [Sun, 24 Sep 2006 18:54:04 +0000 (20:54 +0200)]
hwmon: New driver for the VIA VT1211

hwmon: New driver for the VIA VT1211

This is a new driver for the VIA VT1211 Super-IO chip. It is a rewrite
of the existing vt1211 driver (by Mark D. Studebaker and Lars Ekman)
which has been around for a while but never made it into the main
kernel tree.

It is implemented as a platform driver and therefore requires
lm_sensors 2.10.1 to function properly.

Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agow83791d: Documentation update
Charles Spirakis [Sun, 24 Sep 2006 18:53:04 +0000 (20:53 +0200)]
w83791d: Documentation update

w83791d: Documentation update

The alarm bits and the beep enable bits are in different positions in
the hardware. Document the problem and leave it to the user-space code
to handle the situation. When this driver is updated to the standardized
sysfs alarm/beep methodology, this won't be a problem.

This is a documentation only change.

Signed-off by: Charles Spirakis <bezaur@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agohwmon: Add individual alarm files to 4 drivers
Jean Delvare [Sun, 24 Sep 2006 18:52:15 +0000 (20:52 +0200)]
hwmon: Add individual alarm files to 4 drivers

hwmon: Add individual alarm files to 4 drivers

Add individual sysfs files for all f71805f, lm63, lm83 and lm90 alarm
and fault conditions. This is a requirement for the planned
chip-independent libsensors. Almost all other hwmon drivers will need
the same improvement.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agohwmon: Make a dozen drivers no more experimental
Jean Delvare [Sun, 24 Sep 2006 18:51:37 +0000 (20:51 +0200)]
hwmon: Make a dozen drivers no more experimental

hwmon: Make a dozen drivers no more experimental

Remove the EXPERIMENTAL tag from a dozen hardware monitoring drivers.
They are in the tree for quite a long time, so we would know by now if
they were causing trouble.

Also make it clearer that the VT8231 is a VIA chip.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agok8temp: Add documentation
Rudolf Marek [Sun, 24 Sep 2006 18:50:57 +0000 (20:50 +0200)]
k8temp: Add documentation

k8temp: Add documentation

Add promised documentation for the k8temp driver.

Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoabituguru: Add suspend/resume support
Hans de Goede [Mon, 28 Aug 2006 12:42:24 +0000 (14:42 +0200)]
abituguru: Add suspend/resume support

This patch contains rudimentary suspend / resume support for the uguru,
this protects the uguru and the driver against suspend / resume cycles,
so there is no reason to unload the driver in your suspend / resume
scripts.

Only include suspend / resume functions when CONFIG_PM is set.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agok8temp: Enable automatic loading
Jean Delvare [Mon, 28 Aug 2006 12:41:03 +0000 (14:41 +0200)]
k8temp: Enable automatic loading

Let the k8temp driver load automatically.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agohwmon: New driver k8temp
Rudolf Marek [Mon, 28 Aug 2006 12:40:17 +0000 (14:40 +0200)]
hwmon: New driver k8temp

Add support for the temperature sensor(s) found in AMD K8 CPUs.

Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoit87: Copyright update
Jean Delvare [Mon, 28 Aug 2006 12:39:26 +0000 (14:39 +0200)]
it87: Copyright update

it87: Copyright update

I think my contributions to the it87 driver over the past two
years qualify me as a co-author of this driver.

Also drop old comments of dubious usefulness.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoit87: Overwrite broken default limits
Jean Delvare [Mon, 28 Aug 2006 12:37:54 +0000 (14:37 +0200)]
it87: Overwrite broken default limits

it87: Overwrite broken default limits

Some IT8716F chips where seen with unreasonable defaults for low
voltage and high temperature limits. Overwrite them with sane defaults
so as to not generate meaningless alarms.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoit87: Add support for the IT8718F
Jean Delvare [Mon, 28 Aug 2006 12:37:19 +0000 (14:37 +0200)]
it87: Add support for the IT8718F

it87: Add support for the IT8718F

The IT8718F is a Super-I/O chip with integrated hardware monitoring
functions. It is very similar to the IT8716F, so adding support to the
it87 driver was pretty straightforward. The most significant difference
is that the IT8718F has up to 8 VID pins, instead of 6 for the older
chips.

For the IT8718F, the VID value can only be read from Super-I/O space.

Userspace support is already in lm_sensors SVN (to be soon released
as 2.10.1.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoit87: Cleanup set_fan_div
Jean Delvare [Mon, 28 Aug 2006 12:35:46 +0000 (14:35 +0200)]
it87: Cleanup set_fan_div

it87: Cleanup set_fan_div

We only change one fan clock divider at a time, so there is only one
fan min which needs to be saved and restored.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoit87: in8 has no limit registers
Jean Delvare [Mon, 28 Aug 2006 12:27:25 +0000 (14:27 +0200)]
it87: in8 has no limit registers

it87: in8 has no limit registers

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoit87: Prevent overflow on fan clock divider write
Jean Delvare [Mon, 28 Aug 2006 12:26:22 +0000 (14:26 +0200)]
it87: Prevent overflow on fan clock divider write

it87: Prevent overflow on fan clock divider write

The highest possible clock divider for fan1 and fan2 is 128.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoit87: No sysfs files for disabled fans
Jean Delvare [Mon, 28 Aug 2006 12:24:17 +0000 (14:24 +0200)]
it87: No sysfs files for disabled fans

it87: No sysfs files for disabled fans

Only create the fan attributes for enabled fan tachometers. Some
motherboards have a nice BIOS which only enables the fan inputs which
are wired to a fan header on the board. This makes the configuration
easier for the user.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoit87: Add support for the IT8716F
Jean Delvare [Mon, 28 Aug 2006 12:23:46 +0000 (14:23 +0200)]
it87: Add support for the IT8716F

it87: Add support for the IT8716F

The IT8716F is a Super-I/O chip with integrated hardware monitoring
functions. It is very similar to the IT8712F, so adding support to the
it87 driver was pretty straightforward. The most significant change here
is that the IT8716F has 16-bit fan speed counters, so the user no more
needs to tweak the fan clock dividers to get the best readings.

Userspace support is already in lm_sensors SVN (to be soon released
as 2.10.1.)

Thanks to Stian Oksavik, Olivier Nicolas, Prakash Punnoor and
Juergen Kilb for testing the early versions of this patch.

Thanks also to ITE for providing datasheets and answering my questions.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agosmsc47m1: dev_warn fix
Jean Delvare [Mon, 28 Aug 2006 12:22:34 +0000 (14:22 +0200)]
smsc47m1: dev_warn fix

smsc47m1: dev_warn fix

We can't use dev_warn on an i2c client before it is attached.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agohdaps: Handle errors from input_register_device
Dmitry Torokhov [Mon, 28 Aug 2006 12:21:42 +0000 (14:21 +0200)]
hdaps: Handle errors from input_register_device

HDAPS: handle errors from input_register_device()

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoatxp1: Signed/unsigned char bug fix
Alexey Dobriyan [Mon, 28 Aug 2006 12:18:14 +0000 (14:18 +0200)]
atxp1: Signed/unsigned char bug fix

vid_to_reg() can return -1 and char can be unsigned.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agohwmon: Documentation update for w83627ehf
Rudolf Marek [Wed, 5 Jul 2006 16:15:31 +0000 (18:15 +0200)]
hwmon: Documentation update for w83627ehf

Add documentation for the w83627ehf hardware monitoring driver.

Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agohwmon: Add fan speed control features to w83627ehf
Rudolf Marek [Wed, 5 Jul 2006 16:14:31 +0000 (18:14 +0200)]
hwmon: Add fan speed control features to w83627ehf

This patch adds long-awaited support for automatic fan modes. Based on
the work of Yuan Mu from Winbond, I finished the support with the great
help of David Hubbard.

Signed-off-by: Yuan Mu <Ymu@Winbond.com.tw>
Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: David Hubbard <david.c.hubbard@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
16 years agoMerge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Thu, 28 Sep 2006 21:40:39 +0000 (14:40 -0700)]
Merge branch 'devel' of /home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (130 commits)
  [ARM] 3856/1: Add clocksource for Intel IXP4xx platforms
  [ARM] 3855/1: Add generic time support
  [ARM] 3873/1: S3C24XX: Add irq_chip names
  [ARM] 3872/1: S3C24XX: Apply consistant tabbing to irq_chips
  [ARM] 3871/1: S3C24XX: Fix ordering of EINT4..23
  [ARM] nommu: confirms the CR_V bit in nommu mode
  [ARM] nommu: abort handler fixup for !CPU_CP15_MMU cores.
  [ARM] 3870/1: AT91: Start removing static memory mappings
  [ARM] 3869/1: AT91: NAND support for DK and KB9202 boards
  [ARM] 3868/1: AT91 hardware header update
  [ARM] 3867/1: AT91 GPIO update
  [ARM] 3866/1: AT91 clock update
  [ARM] 3865/1: AT91RM9200 header updates
  [ARM] 3862/2: S3C2410 - add basic power management support for AML M5900 series
  [ARM] kthread: switch arch/arm/kernel/apm.c
  [ARM] Off-by-one in arch/arm/common/icst*
  [ARM] 3864/1: Refactore sharpsl_pm
  [ARM] 3863/1: Add Locomo SPI Device
  [ARM] 3847/2:  Convert LOMOMO to use struct device for GPIOs
  [ARM] Use CPU_CACHE_* where possible in asm/cacheflush.h
  ...

16 years agoMerge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc
Linus Torvalds [Thu, 28 Sep 2006 21:23:55 +0000 (14:23 -0700)]
Merge branch 'devel' of /home/rmk/linux-2.6-mmc

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] Don't check READY_FOR_DATA when reading
  [MMC] MMC_CAP_BYTEBLOCK flag for non-log2 block sizes capable hosts
  [MMC] Add multi block-write capability
  [MMC] Remove data->blksz_bits member
  [MMC] Convert mmci to use data->blksz rather than data->blksz_bits

16 years agoMerge nommu branch
Russell King [Thu, 28 Sep 2006 21:20:39 +0000 (22:20 +0100)]
Merge nommu branch

16 years ago[ARM] 3856/1: Add clocksource for Intel IXP4xx platforms
Kevin Hilman [Thu, 21 Sep 2006 23:58:57 +0000 (00:58 +0100)]
[ARM] 3856/1: Add clocksource for Intel IXP4xx platforms

Enables the ixp4xx platforms to use Generic time-of-day.

Signed-off-by: Kevin Hilman <khilman@mvista.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 3855/1: Add generic time support
Kevin Hilman [Thu, 21 Sep 2006 23:16:30 +0000 (00:16 +0100)]
[ARM] 3855/1: Add generic time support

This patch adds Generic time-of-day support for the ARM architecture.

The support is currently added using #ifdef's so that it can support
sub-arches that do not (yet) have a clocksource added.  As sub-arches
add clocksource support, they should 'select GENERIC_TIME'

Signed-off-by: Deepak Saxena <dsaxena@mvista.com>
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 3873/1: S3C24XX: Add irq_chip names
Ben Dooks [Thu, 28 Sep 2006 19:51:35 +0000 (20:51 +0100)]
[ARM] 3873/1: S3C24XX: Add irq_chip names

Add names to all the irq_chip structes

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 3872/1: S3C24XX: Apply consistant tabbing to irq_chips
Ben Dooks [Thu, 28 Sep 2006 19:45:29 +0000 (20:45 +0100)]
[ARM] 3872/1: S3C24XX: Apply consistant tabbing to irq_chips

Apply consistant tabbing to the IRQ chip
structures in arch/arm/mach-s3c2410/irq.c

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 3871/1: S3C24XX: Fix ordering of EINT4..23
Ben Dooks [Thu, 28 Sep 2006 19:40:50 +0000 (20:40 +0100)]
[ARM] 3871/1: S3C24XX: Fix ordering of EINT4..23

The demux code for the IRQ EINTs above 3 was
using find last set instead of finding first
set.

Also fix it so that we only check EINT4..7
when the parent EINT4t7 goes off, and the
8..23 when EINT8t23 goes off.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] nommu: confirms the CR_V bit in nommu mode
Hyok S. Choi [Thu, 28 Sep 2006 12:46:34 +0000 (21:46 +0900)]
[ARM] nommu: confirms the CR_V bit in nommu mode

In nommu mode, the exception vector location depends on the platforms.
Some of the implementations may have some special exception control
forwarding method in their ROM/flash and for some of them has its own
re-mapping mechanism by the h/w.

This patch introduces a special configuration CONFIG_CPU_HIGH_VECTOR which
turns on the CR_V bit in nommu mode. The CR_V bit is turned off by default.
This feature depends on CP15 and does not supported by ARM740.

Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] nommu: abort handler fixup for !CPU_CP15_MMU cores.
Hyok S. Choi [Thu, 28 Sep 2006 12:46:16 +0000 (21:46 +0900)]
[ARM] nommu: abort handler fixup for !CPU_CP15_MMU cores.

There is no FSR/FAR register on no-CP15 or MPU cores. This patch adds a
dummy abort handler which returns zero for the base restored Data Abort
model !CPU_CP15_MMU cores. The abort-lv4t.S is still used with the fix-up
for the base updated Data Abort model cores.

Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 3870/1: AT91: Start removing static memory mappings
Andrew Victor [Thu, 28 Sep 2006 15:26:47 +0000 (16:26 +0100)]
[ARM] 3870/1: AT91: Start removing static memory mappings

This patch removes the static memory mapping for the currently-unused
peripherals [Synchronous Serial, Timer/Counter unit], and for those
drivers that already ioremap() their registers [UART].

Also, the Ethernet driver now uses the platform_device resources but
doesn't yet use ioremap() so we need to pass it the virtual address
instead of the physical address.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[S390] Inline assembly cleanup.
Martin Schwidefsky [Thu, 28 Sep 2006 14:56:43 +0000 (16:56 +0200)]
[S390] Inline assembly cleanup.

Major cleanup of all s390 inline assemblies. They now have a common
coding style. Quite a few have been shortened, mainly by using register
asm variables. Use of the EX_TABLE macro helps  as well. The atomic ops,
bit ops and locking inlines new use the Q-constraint if a newer gcc
is used.  That results in slightly better code.

Thanks to Christian Borntraeger for proof reading the changes.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
16 years ago[S390] Whitespace cleanup.
Heiko Carstens [Thu, 28 Sep 2006 14:56:37 +0000 (16:56 +0200)]
[S390] Whitespace cleanup.

Huge s390 assembly files whitespace cleanup.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
16 years ago[S390] user readable uninitialised kernel memory.
Martin Schwidefsky [Thu, 28 Sep 2006 14:56:03 +0000 (16:56 +0200)]
[S390] user readable uninitialised kernel memory.

A user space program can read uninitialised kernel memory
by appending to a file from a bad address and then reading
the result back. The cause is the copy_from_user function
that does not clear the remaining bytes of the kernel
buffer after it got a fault on the user space address.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
16 years ago[S390] init_timer in tty3270.
Jan Glauber [Thu, 28 Sep 2006 14:55:53 +0000 (16:55 +0200)]
[S390] init_timer in tty3270.

Call init_timer only once fpr tp->timer in tty3270.

Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
16 years ago[S390] config option for z9-109 code generation.
Christian Borntraeger [Thu, 28 Sep 2006 14:55:46 +0000 (16:55 +0200)]
[S390] config option for z9-109 code generation.

Add a kernel config option for the IBM System z9. This will produce
faster code on newer compilers using the -march=z9-109 option.

Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
16 years ago[S390] __div64_32 for 31 bit.
Martin Schwidefsky [Thu, 28 Sep 2006 14:55:39 +0000 (16:55 +0200)]
[S390] __div64_32 for 31 bit.

The clocksource infrastructure introduced with commit
ad596171ed635c51a9eef829187af100cbf8dcf7 broke 31 bit s390.
The reason is that the do_div() primitive for 31 bit always
had a restriction: it could only divide an unsigned 64 bit
integer by an unsigned 31 bit integer. The clocksource code
now uses do_div() with a base value that has the most
significant bit set. The result is that clock->cycle_interval
has a funny value which causes the linux time to jump around
like mad.
The solution is "obvious": implement a proper __div64_32
function for 31 bit s390.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
16 years ago[S390] remove unnecessary includes.
Christian Borntraeger [Thu, 28 Sep 2006 14:55:33 +0000 (16:55 +0200)]
[S390] remove unnecessary includes.

Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
16 years ago[S390] hypfs sparse warnings.
Michael Holzheu [Thu, 28 Sep 2006 14:55:28 +0000 (16:55 +0200)]
[S390] hypfs sparse warnings.

sparse complains, if we use bitwise operations on enums. Cast enum to
long in order to fix that problem!

Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
16 years ago[S390] Avoid static struct initializations in appldata.
Gerald Schaefer [Thu, 28 Sep 2006 14:55:23 +0000 (16:55 +0200)]
[S390] Avoid static struct initializations in appldata.

Don't use static initialization for struct members containing
variables because gcc would generate more code and use double space
on stack.

Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
16 years ago[S390] init task memory faults.
Akinobu Mita [Thu, 28 Sep 2006 14:55:18 +0000 (16:55 +0200)]
[S390] init task memory faults.

Lock for mmap_sem is missing on page fault retry for init task
when it fails due to out of memory.

Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
16 years ago[ARM] 3869/1: AT91: NAND support for DK and KB9202 boards
Andrew Victor [Thu, 28 Sep 2006 09:27:00 +0000 (10:27 +0100)]
[ARM] 3869/1: AT91: NAND support for DK and KB9202 boards

This patch adds support for the NAND flash on the Atmel AT91RM9200-DK
and KwikByte KB920x boards.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 3868/1: AT91 hardware header update
Andrew Victor [Wed, 27 Sep 2006 15:18:18 +0000 (16:18 +0100)]
[ARM] 3868/1: AT91 hardware header update

This patch adds the hardware register definitions for the TWI (I2C)
controller found on the AT91RM9200 and AT91SAM9xx processors.
It also defines the AIC Fast-Forcing registers added to the AT91SAM9's.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 3867/1: AT91 GPIO update
Andrew Victor [Wed, 27 Sep 2006 12:23:00 +0000 (13:23 +0100)]
[ARM] 3867/1: AT91 GPIO update

This patch makes the AT91 gpio.c support processor-generic (AT91RM9200
and AT91SAM9xxx).  The GPIO controllers supported by a particular AT91
processor are defined in the processor-specific file and are registered
with gpio.c at startup.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 3866/1: AT91 clock update
Andrew Victor [Wed, 27 Sep 2006 09:50:59 +0000 (10:50 +0100)]
[ARM] 3866/1: AT91 clock update

This patch makes the AT91 clock.c support processor-generic (AT91RM9200
and AT91SAM9xxx).  The clocks supported by a particular AT91 processor
are defined in the processor-specific file and are registered with
clock.c at startup.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 3865/1: AT91RM9200 header updates
Andrew Victor [Wed, 27 Sep 2006 08:44:11 +0000 (09:44 +0100)]
[ARM] 3865/1: AT91RM9200 header updates

This is more preparation for adding support for the new Atmel AT91SAM9
processors.

Changes include:
- Replace AT91_BASE_* with AT91RM9200_BASE_*
- Replace AT91_ID_* with AT91RM9200_ID_*
- ROM, SRAM and UHP address definitions moved to at91rm9200.h.
- The raw AT91_P[ABCD]_* definitions are now depreciated in favour of
the GPIO API.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 3862/2: S3C2410 - add basic power management support for AML M5900 series
David Anders [Tue, 26 Sep 2006 16:46:00 +0000 (17:46 +0100)]
[ARM] 3862/2: S3C2410 - add basic power management support for AML M5900 series

this patch registers the wakeup irq, sets a gpio pin to indicate the
status of system for suspend/resume operations, and adds the machine to
the supported machines for use with the simtec-pm

Signed-off-by: David Anders <danders@amltd.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] kthread: switch arch/arm/kernel/apm.c
Serge E. Hallyn [Mon, 7 Aug 2006 16:57:36 +0000 (11:57 -0500)]
[ARM] kthread: switch arch/arm/kernel/apm.c

Switch arch/arm/kernel/apm.c from using kernel_thread - whose export
is deprecated - to kthread.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] Off-by-one in arch/arm/common/icst*
Eric Sesterhenn [Tue, 26 Sep 2006 12:22:00 +0000 (14:22 +0200)]
[ARM] Off-by-one in arch/arm/common/icst*

hi,

a quick find -iname \*.[ch] | xargs grep "> ARRAY_SIZE(", revealed
these in the icst drivers.
If i == ARRAY_SIZE, we get past the idx2s array.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Wed, 27 Sep 2006 21:41:24 +0000 (14:41 -0700)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (48 commits)
  [PATCH] bonding: update version number
  [PATCH] git-netdev-all: pc300_tty build fix
  [PATCH] Make PC300 WAN driver compile again
  [PATCH] Modularize generic HDLC
  [PATCH] more s2io __iomem annotations
  [PATCH] restore __iomem annotations in e1000
  [PATCH] 64bit bugs in s2io
  [PATCH] bonding: Fix primary selection error at enslavement time
  [PATCH] bonding: Don't mangle LACPDUs
  [PATCH] bonding: Validate probe replies in ARP monitor
  [PATCH] bonding: Don't release slaves when master is admin down
  [PATCH] bonding: Add priv_flag to avoid event mishandling
  [PATCH] bonding: Handle large hard_header_len
  [PATCH] bonding: Remove unneeded NULL test
  [PATCH] bonding: Format fix in seq_printf call
  [PATCH] bonding: Convert delay value from s16 to int
  [PATCH] bonding: Allow bonding to enslave a 10 Gig adapter
  Delete unused drivers/net/gt64240eth.h
  [PATCH] skge: fiber support
  [PATCH] fix possible NULL ptr deref in forcedeth
  ...

16 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Wed, 27 Sep 2006 21:41:00 +0000 (14:41 -0700)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] Don't use old-EH ->eng_timeout() hook when not needed
  [libata] sata_mv: fix oops by filling in missing hook
  [libata] One more s/15/ATA_SECONDARY_IRQ/ substitution
  [libata] pata_serverworks: fill in ->irq_clear hook
  [PATCH] pata_serverworks: correct PCI ID in cable detection table
  [PATCH] libata-sff: use our IRQ defines
  [PATCH] libata-eh: Remove layering violation and duplication when handling absent ports
  [PATCH] libata: tighten rules for legacy dependancies
  [PATCH] libata: refuse to register IRQless ports

16 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Wed, 27 Sep 2006 21:40:30 +0000 (14:40 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (129 commits)
  [PATCH] USB Storage: fix Rio Karma eject support build error
  USB: Airprime driver improvements to allow full speed EvDO transfers
  USB: remove OTG build warning
  USB: EHCI update VIA workaround
  USB: force root hub resume after power loss
  USB: ohci_usb can oops on shutdown
  USB: Dealias -110 code (more complete)
  USB: Remove unneeded void * casts in core files
  USB: u132-hcd: host controller driver for ELAN U132 adapter
  USB: ftdi-elan: client driver for ELAN Uxxx adapters
  usb serial: support Alcor Micro Corp. USB 2.0 TO RS-232 through pl2303 driver
  USB: Moschip 7840 USB-Serial Driver
  USB: add PlayStation 2 Trance Vibrator driver
  USB: Add ADU support for Ontrak ADU devices
  aircable: fix printk format warnings
  Add AIRcable USB Bluetooth Dongle Driver
  cypress_m8: implement graceful failure handling
  cypress_m8: improve control endpoint error handling
  cypress_m8: use usb_fill_int_urb where appropriate
  cypress_m8: use appropriate URB polling interval
  ...

16 years ago[PATCH] i386: Use early clobbers for semaphores now
Andi Kleen [Wed, 27 Sep 2006 19:38:56 +0000 (21:38 +0200)]
[PATCH] i386: Use early clobbers for semaphores now

The new code does clobber the result early, so make sure to tell
gcc to not put it into the same register as a input argument

Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@osdl.org>
Acked-by: Kyle McMartin <kyle@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>