pandora-kernel.git
8 years agoiovec: make sure the caller actually wants anything in memcpy_fromiovecend
Sasha Levin [Fri, 1 Aug 2014 03:00:35 +0000 (23:00 -0400)]
iovec: make sure the caller actually wants anything in memcpy_fromiovecend

[ Upstream commit 06ebb06d49486676272a3c030bfeef4bd969a8e6 ]

Check for cases when the caller requests 0 bytes instead of running off
and dereferencing potentially invalid iovecs.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agomacvlan: Initialize vlan_features to turn on offload support.
Vlad Yasevich [Thu, 31 Jul 2014 14:30:25 +0000 (10:30 -0400)]
macvlan: Initialize vlan_features to turn on offload support.

[ Upstream commit 081e83a78db9b0ae1f5eabc2dedecc865f509b98 ]

Macvlan devices do not initialize vlan_features.  As a result,
any vlan devices configured on top of macvlans perform very poorly.
Initialize vlan_features based on the vlan features of the lower-level
device.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agonet: sctp: inherit auth_capable on INIT collisions
Daniel Borkmann [Tue, 22 Jul 2014 13:22:45 +0000 (15:22 +0200)]
net: sctp: inherit auth_capable on INIT collisions

[ Upstream commit 1be9a950c646c9092fb3618197f7b6bfb50e82aa ]

Jason reported an oops caused by SCTP on his ARM machine with
SCTP authentication enabled:

Internal error: Oops: 17 [#1] ARM
CPU: 0 PID: 104 Comm: sctp-test Not tainted 3.13.0-68744-g3632f30c9b20-dirty #1
task: c6eefa40 ti: c6f52000 task.ti: c6f52000
PC is at sctp_auth_calculate_hmac+0xc4/0x10c
LR is at sg_init_table+0x20/0x38
pc : [<c024bb80>]    lr : [<c00f32dc>]    psr: 40000013
sp : c6f538e8  ip : 00000000  fp : c6f53924
r10: c6f50d80  r9 : 00000000  r8 : 00010000
r7 : 00000000  r6 : c7be4000  r5 : 00000000  r4 : c6f56254
r3 : c00c8170  r2 : 00000001  r1 : 00000008  r0 : c6f1e660
Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 0005397f  Table: 06f28000  DAC: 00000015
Process sctp-test (pid: 104, stack limit = 0xc6f521c0)
Stack: (0xc6f538e8 to 0xc6f54000)
[...]
Backtrace:
[<c024babc>] (sctp_auth_calculate_hmac+0x0/0x10c) from [<c0249af8>] (sctp_packet_transmit+0x33c/0x5c8)
[<c02497bc>] (sctp_packet_transmit+0x0/0x5c8) from [<c023e96c>] (sctp_outq_flush+0x7fc/0x844)
[<c023e170>] (sctp_outq_flush+0x0/0x844) from [<c023ef78>] (sctp_outq_uncork+0x24/0x28)
[<c023ef54>] (sctp_outq_uncork+0x0/0x28) from [<c0234364>] (sctp_side_effects+0x1134/0x1220)
[<c0233230>] (sctp_side_effects+0x0/0x1220) from [<c02330b0>] (sctp_do_sm+0xac/0xd4)
[<c0233004>] (sctp_do_sm+0x0/0xd4) from [<c023675c>] (sctp_assoc_bh_rcv+0x118/0x160)
[<c0236644>] (sctp_assoc_bh_rcv+0x0/0x160) from [<c023d5bc>] (sctp_inq_push+0x6c/0x74)
[<c023d550>] (sctp_inq_push+0x0/0x74) from [<c024a6b0>] (sctp_rcv+0x7d8/0x888)

While we already had various kind of bugs in that area
ec0223ec48a9 ("net: sctp: fix sctp_sf_do_5_1D_ce to verify if
we/peer is AUTH capable") and b14878ccb7fa ("net: sctp: cache
auth_enable per endpoint"), this one is a bit of a different
kind.

Giving a bit more background on why SCTP authentication is
needed can be found in RFC4895:

  SCTP uses 32-bit verification tags to protect itself against
  blind attackers. These values are not changed during the
  lifetime of an SCTP association.

  Looking at new SCTP extensions, there is the need to have a
  method of proving that an SCTP chunk(s) was really sent by
  the original peer that started the association and not by a
  malicious attacker.

To cause this bug, we're triggering an INIT collision between
peers; normal SCTP handshake where both sides intent to
authenticate packets contains RANDOM; CHUNKS; HMAC-ALGO
parameters that are being negotiated among peers:

  ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
  <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
  -------------------- COOKIE-ECHO -------------------->
  <-------------------- COOKIE-ACK ---------------------

RFC4895 says that each endpoint therefore knows its own random
number and the peer's random number *after* the association
has been established. The local and peer's random number along
with the shared key are then part of the secret used for
calculating the HMAC in the AUTH chunk.

Now, in our scenario, we have 2 threads with 1 non-blocking
SEQ_PACKET socket each, setting up common shared SCTP_AUTH_KEY
and SCTP_AUTH_ACTIVE_KEY properly, and each of them calling
sctp_bindx(3), listen(2) and connect(2) against each other,
thus the handshake looks similar to this, e.g.:

  ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
  <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
  <--------- INIT[RANDOM; CHUNKS; HMAC-ALGO] -----------
  -------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] -------->
  ...

Since such collisions can also happen with verification tags,
the RFC4895 for AUTH rather vaguely says under section 6.1:

  In case of INIT collision, the rules governing the handling
  of this Random Number follow the same pattern as those for
  the Verification Tag, as explained in Section 5.2.4 of
  RFC 2960 [5]. Therefore, each endpoint knows its own Random
  Number and the peer's Random Number after the association
  has been established.

In RFC2960, section 5.2.4, we're eventually hitting Action B:

  B) In this case, both sides may be attempting to start an
     association at about the same time but the peer endpoint
     started its INIT after responding to the local endpoint's
     INIT. Thus it may have picked a new Verification Tag not
     being aware of the previous Tag it had sent this endpoint.
     The endpoint should stay in or enter the ESTABLISHED
     state but it MUST update its peer's Verification Tag from
     the State Cookie, stop any init or cookie timers that may
     running and send a COOKIE ACK.

In other words, the handling of the Random parameter is the
same as behavior for the Verification Tag as described in
Action B of section 5.2.4.

Looking at the code, we exactly hit the sctp_sf_do_dupcook_b()
case which triggers an SCTP_CMD_UPDATE_ASSOC command to the
side effect interpreter, and in fact it properly copies over
peer_{random, hmacs, chunks} parameters from the newly created
association to update the existing one.

Also, the old asoc_shared_key is being released and based on
the new params, sctp_auth_asoc_init_active_key() updated.
However, the issue observed in this case is that the previous
asoc->peer.auth_capable was 0, and has *not* been updated, so
that instead of creating a new secret, we're doing an early
return from the function sctp_auth_asoc_init_active_key()
leaving asoc->asoc_shared_key as NULL. However, we now have to
authenticate chunks from the updated chunk list (e.g. COOKIE-ACK).

That in fact causes the server side when responding with ...

  <------------------ AUTH; COOKIE-ACK -----------------

... to trigger a NULL pointer dereference, since in
sctp_packet_transmit(), it discovers that an AUTH chunk is
being queued for xmit, and thus it calls sctp_auth_calculate_hmac().

Since the asoc->active_key_id is still inherited from the
endpoint, and the same as encoded into the chunk, it uses
asoc->asoc_shared_key, which is still NULL, as an asoc_key
and dereferences it in ...

  crypto_hash_setkey(desc.tfm, &asoc_key->data[0], asoc_key->len)

... causing an oops. All this happens because sctp_make_cookie_ack()
called with the *new* association has the peer.auth_capable=1
and therefore marks the chunk with auth=1 after checking
sctp_auth_send_cid(), but it is *actually* sent later on over
the then *updated* association's transport that didn't initialize
its shared key due to peer.auth_capable=0. Since control chunks
in that case are not sent by the temporary association which
are scheduled for deletion, they are issued for xmit via
SCTP_CMD_REPLY in the interpreter with the context of the
*updated* association. peer.auth_capable was 0 in the updated
association (which went from COOKIE_WAIT into ESTABLISHED state),
since all previous processing that performed sctp_process_init()
was being done on temporary associations, that we eventually
throw away each time.

The correct fix is to update to the new peer.auth_capable
value as well in the collision case via sctp_assoc_update(),
so that in case the collision migrated from 0 -> 1,
sctp_auth_asoc_init_active_key() can properly recalculate
the secret. This therefore fixes the observed server panic.

Fixes: 730fc3d05cd4 ("[SCTP]: Implete SCTP-AUTH parameter processing")
Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agotcp: Fix integer-overflow in TCP vegas
Christoph Paasch [Tue, 29 Jul 2014 11:40:57 +0000 (13:40 +0200)]
tcp: Fix integer-overflow in TCP vegas

[ Upstream commit 1f74e613ded11517db90b2bd57e9464d9e0fb161 ]

In vegas we do a multiplication of the cwnd and the rtt. This
may overflow and thus their result is stored in a u64. However, we first
need to cast the cwnd so that actually 64-bit arithmetic is done.

Then, we need to do do_div to allow this to be used on 32-bit arches.

Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Doug Leith <doug.leith@nuim.ie>
Fixes: 8d3a564da34e (tcp: tcp_vegas cong avoid fix)
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agotcp: Fix integer-overflows in TCP veno
Christoph Paasch [Tue, 29 Jul 2014 10:07:27 +0000 (12:07 +0200)]
tcp: Fix integer-overflows in TCP veno

[ Upstream commit 45a07695bc64b3ab5d6d2215f9677e5b8c05a7d0 ]

In veno we do a multiplication of the cwnd and the rtt. This
may overflow and thus their result is stored in a u64. However, we first
need to cast the cwnd so that actually 64-bit arithmetic is done.

A first attempt at fixing 76f1017757aa0 ([TCP]: TCP Veno congestion
control) was made by 159131149c2 (tcp: Overflow bug in Vegas), but it
failed to add the required cast in tcp_veno_cong_avoid().

Fixes: 76f1017757aa0 ([TCP]: TCP Veno congestion control)
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoip: make IP identifiers less predictable
Eric Dumazet [Sat, 26 Jul 2014 06:58:10 +0000 (08:58 +0200)]
ip: make IP identifiers less predictable

[ Upstream commit 04ca6973f7c1a0d8537f2d9906a0cf8e69886d75 ]

In "Counting Packets Sent Between Arbitrary Internet Hosts", Jeffrey and
Jedidiah describe ways exploiting linux IP identifier generation to
infer whether two machines are exchanging packets.

With commit 73f156a6e8c1 ("inetpeer: get rid of ip_id_count"), we
changed IP id generation, but this does not really prevent this
side-channel technique.

This patch adds a random amount of perturbation so that IP identifiers
for a given destination [1] are no longer monotonically increasing after
an idle period.

Note that prandom_u32_max(1) returns 0, so if generator is used at most
once per jiffy, this patch inserts no hole in the ID suite and do not
increase collision probability.

This is jiffies based, so in the worst case (HZ=1000), the id can
rollover after ~65 seconds of idle time, which should be fine.

We also change the hash used in __ip_select_ident() to not only hash
on daddr, but also saddr and protocol, so that ICMP probes can not be
used to infer information for other protocols.

For IPv6, adds saddr into the hash as well, but not nexthdr.

If I ping the patched target, we can see ID are now hard to predict.

21:57:11.008086 IP (...)
    A > target: ICMP echo request, seq 1, length 64
21:57:11.010752 IP (... id 2081 ...)
    target > A: ICMP echo reply, seq 1, length 64

21:57:12.013133 IP (...)
    A > target: ICMP echo request, seq 2, length 64
21:57:12.015737 IP (... id 3039 ...)
    target > A: ICMP echo reply, seq 2, length 64

21:57:13.016580 IP (...)
    A > target: ICMP echo request, seq 3, length 64
21:57:13.019251 IP (... id 3437 ...)
    target > A: ICMP echo reply, seq 3, length 64

[1] TCP sessions uses a per flow ID generator not changed by this patch.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jeffrey Knockel <jeffk@cs.unm.edu>
Reported-by: Jedidiah R. Crandall <crandall@cs.unm.edu>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Hannes Frederic Sowa <hannes@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoinetpeer: get rid of ip_id_count
Eric Dumazet [Mon, 2 Jun 2014 12:26:03 +0000 (05:26 -0700)]
inetpeer: get rid of ip_id_count

[ Upstream commit 73f156a6e8c1074ac6327e0abd1169e95eb66463 ]

Ideally, we would need to generate IP ID using a per destination IP
generator.

linux kernels used inet_peer cache for this purpose, but this had a huge
cost on servers disabling MTU discovery.

1) each inet_peer struct consumes 192 bytes

2) inetpeer cache uses a binary tree of inet_peer structs,
   with a nominal size of ~66000 elements under load.

3) lookups in this tree are hitting a lot of cache lines, as tree depth
   is about 20.

4) If server deals with many tcp flows, we have a high probability of
   not finding the inet_peer, allocating a fresh one, inserting it in
   the tree with same initial ip_id_count, (cf secure_ip_id())

5) We garbage collect inet_peer aggressively.

IP ID generation do not have to be 'perfect'

Goal is trying to avoid duplicates in a short period of time,
so that reassembly units have a chance to complete reassembly of
fragments belonging to one message before receiving other fragments
with a recycled ID.

We simply use an array of generators, and a Jenkin hash using the dst IP
as a key.

ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it
belongs (it is only used from this file)

secure_ip_id() and secure_ipv6_id() no longer are needed.

Rename ip_select_ident_more() to ip_select_ident_segs() to avoid
unnecessary decrement/increment of the number of segments.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoopenrisc: include export.h for EXPORT_SYMBOL
Jonas Bonn [Wed, 15 Feb 2012 14:00:32 +0000 (15:00 +0100)]
openrisc: include export.h for EXPORT_SYMBOL

commit abdf8b5e07884a183938969253770164d60b87cb upstream.

Use of EXPORT_SYMBOL requires inclusion of export.h

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoMIPS: Fix accessing to per-cpu data when flushing the cache
Ralf Baechle [Tue, 17 Sep 2013 10:44:31 +0000 (12:44 +0200)]
MIPS: Fix accessing to per-cpu data when flushing the cache

commit ff522058bd717506b2fa066fa564657f2b86477e upstream.

This fixes the following issue

BUG: using smp_processor_id() in preemptible [00000000] code: kjournald/1761
caller is blast_dcache32+0x30/0x254
Call Trace:
[<8047f02c>] dump_stack+0x8/0x34
[<802e7e40>] debug_smp_processor_id+0xe0/0xf0
[<80114d94>] blast_dcache32+0x30/0x254
[<80118484>] r4k_dma_cache_wback_inv+0x200/0x288
[<80110ff0>] mips_dma_map_sg+0x108/0x180
[<80355098>] ide_dma_prepare+0xf0/0x1b8
[<8034eaa4>] do_rw_taskfile+0x1e8/0x33c
[<8035951c>] ide_do_rw_disk+0x298/0x3e4
[<8034a3c4>] do_ide_request+0x2e0/0x704
[<802bb0dc>] __blk_run_queue+0x44/0x64
[<802be000>] queue_unplugged.isra.36+0x1c/0x54
[<802beb94>] blk_flush_plug_list+0x18c/0x24c
[<802bec6c>] blk_finish_plug+0x18/0x48
[<8026554c>] journal_commit_transaction+0x3b8/0x151c
[<80269648>] kjournald+0xec/0x238
[<8014ac00>] kthread+0xb8/0xc0
[<8010268c>] ret_from_kernel_thread+0x14/0x1c

Caches in most systems are identical - but not always, so we can't avoid
the use of smp_call_function() by just looking at the boot CPU's data,
have to fiddle with preemption instead.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5835
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoMIPS: perf: Fix build error caused by unused counters_per_cpu_to_total()
Florian Fainelli [Thu, 19 Jul 2012 07:13:52 +0000 (09:13 +0200)]
MIPS: perf: Fix build error caused by unused counters_per_cpu_to_total()

commit 6c37c9580409af7dc664bb6af0a85d540d63aeea upstream.

cc1: warnings being treated as errors
arch/mips/kernel/perf_event_mipsxx.c:166: error: 'counters_per_cpu_to_total' defined but not used
make[2]: *** [arch/mips/kernel/perf_event_mipsxx.o] Error 1
make[2]: *** Waiting for unfinished jobs....

It was first introduced by 82091564cfd7ab8def42777a9c662dbf655c5d25 [MIPS:
perf: Add support for 64-bit perf counters.] in 3.2.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: david.daney@cavium.com
Patchwork: https://patchwork.linux-mips.org/patch/3357/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoopenrisc: add missing header inclusion
Stefan Kristiansson [Tue, 26 Feb 2013 06:36:29 +0000 (07:36 +0100)]
openrisc: add missing header inclusion

commit 160d83781a32e94a1e337efd6722939001e62398 upstream.

Prevents build issue with updated toolchain

Reported-by: Jack Thomasson <jkt@moonlitsw.com>
Tested-by: Christian Svensson <blue@cmd.nu>
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: serial: fix potential heap buffer overflow
Johan Hovold [Wed, 27 Aug 2014 09:55:19 +0000 (11:55 +0200)]
USB: serial: fix potential heap buffer overflow

commit 5654699fb38512bdbfc0f892ce54fce75bdc2bab upstream.

Make sure to verify the number of ports requested by subdriver to avoid
writing beyond the end of fixed-size array in interface data.

The current usb-serial implementation is limited to eight ports per
interface but failed to verify that the number of ports requested by a
subdriver (which could have been determined from device descriptors) did
not exceed this limit.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: s/ddev/\&interface->dev/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: serial: fix potential stack buffer overflow
Johan Hovold [Wed, 27 Aug 2014 09:55:18 +0000 (11:55 +0200)]
USB: serial: fix potential stack buffer overflow

commit d979e9f9ecab04c1ecca741370e30a8a498893f5 upstream.

Make sure to verify the maximum number of endpoints per type to avoid
writing beyond the end of a stack-allocated array.

The current usb-serial implementation is limited to eight ports per
interface but failed to verify that the number of endpoints of a certain
type reported by a device did not exceed this limit.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoARM: 8129/1: errata: work around Cortex-A15 erratum 830321 using dummy strex
Mark Rutland [Fri, 15 Aug 2014 11:11:50 +0000 (12:11 +0100)]
ARM: 8129/1: errata: work around Cortex-A15 erratum 830321 using dummy strex

commit 2c32c65e3726c773760038910be30cce1b4d4149 upstream.

On revisions of Cortex-A15 prior to r3p3, a CLREX instruction at PL1 may
falsely trigger a watchpoint exception, leading to potential data aborts
during exception return and/or livelock.

This patch resolves the issue in the following ways:

  - Replacing our uses of CLREX with a dummy STREX sequence instead (as
    we did for v6 CPUs).

  - Removing the clrex code from v7_exit_coherency_flush and derivatives,
    since this only exists as a minor performance improvement when
    non-cached exclusives are in use (Linux doesn't use these).

Benchmarking on a variety of ARM cores revealed no measurable
performance difference with this change applied, so the change is
performed unconditionally and no new Kconfig entry is added.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[bwh: Backported to 3.2:
 - Drop inapplicable changes to arch/arm/include/asm/cacheflush.h and
   arch/arm/mach-exynos/mcpm-exynos.c]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoARM: 8128/1: abort: don't clear the exclusive monitors
Mark Rutland [Fri, 15 Aug 2014 11:11:49 +0000 (12:11 +0100)]
ARM: 8128/1: abort: don't clear the exclusive monitors

commit 85868313177700d20644263a782351262d2aff84 upstream.

The ARMv6 and ARMv7 early abort handlers clear the exclusive monitors
upon entry to the kernel, but this is redundant:

  - We clear the monitors on every exception return since commit
    200b812d0084 ("Clear the exclusive monitor when returning from an
    exception"), so this is not necessary to ensure the monitors are
    cleared before returning from a fault handler.

  - Any dummy STREX will target a temporary scratch area in memory, and
    may succeed or fail without corrupting useful data. Its status value
    will not be used.

  - Any other STREX in the kernel must be preceded by an LDREX, which
    will initialise the monitors consistently and will not depend on the
    earlier state of the monitors.

Therefore we have no reason to care about the initial state of the
exclusive monitors when a data abort is taken, and clearing the monitors
prior to exception return (as we already do) is sufficient.

This patch removes the redundant clearing of the exclusive monitors from
the early abort handlers.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoHID: picolcd: sanity check report size in raw_event() callback
Jiri Kosina [Wed, 27 Aug 2014 07:13:15 +0000 (09:13 +0200)]
HID: picolcd: sanity check report size in raw_event() callback

commit 844817e47eef14141cf59b8d5ac08dd11c0a9189 upstream.

The report passed to us from transport driver could potentially be
arbitrarily large, therefore we better sanity-check it so that raw_data
that we hold in picolcd_pending structure are always kept within proper
bounds.

Reported-by: Steven Vittitoe <scvitti@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoHID: magicmouse: sanity check report size in raw_event() callback
Jiri Kosina [Wed, 27 Aug 2014 07:12:24 +0000 (09:12 +0200)]
HID: magicmouse: sanity check report size in raw_event() callback

commit c54def7bd64d7c0b6993336abcffb8444795bf38 upstream.

The report passed to us from transport driver could potentially be
arbitrarily large, therefore we better sanity-check it so that
magicmouse_emit_touch() gets only valid values of raw_id.

Reported-by: Steven Vittitoe <scvitti@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoNFSv4: Fix problems with close in the presence of a delegation
Trond Myklebust [Tue, 26 Aug 2014 02:33:12 +0000 (22:33 -0400)]
NFSv4: Fix problems with close in the presence of a delegation

commit aee7af356e151494d5014f57b33460b162f181b5 upstream.

In the presence of delegations, we can no longer assume that the
state->n_rdwr, state->n_rdonly, state->n_wronly reflect the open
stateid share mode, and so we need to calculate the initial value
for calldata->arg.fmode using the state->flags.

Reported-by: James Drews <drews@engr.wisc.edu>
Fixes: 88069f77e1ac5 (NFSv41: Fix a potential state leakage when...)
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: sisusb: add device id for Magic Control USB video
Stephen Hemminger [Tue, 26 Aug 2014 04:07:47 +0000 (21:07 -0700)]
USB: sisusb: add device id for Magic Control USB video

commit 5b6b80aeb21091ed3030b9b6aae597d81326f1aa upstream.

I have a j5 create (JUA210) USB 2 video device and adding it device id
to SIS USB video gets it to work.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoACPI / EC: Add support to disallow QR_EC to be issued when SCI_EVT isn't set
Lv Zheng [Thu, 21 Aug 2014 06:41:13 +0000 (14:41 +0800)]
ACPI / EC: Add support to disallow QR_EC to be issued when SCI_EVT isn't set

commit 3afcf2ece453e1a8c2c6de19cdf06da3772a1b08 upstream.

There is a platform refusing to respond QR_EC when SCI_EVT isn't set
(Acer Aspire V5-573G).

Currently, we rely on the behaviour that the EC firmware can respond
something (for example, 0x00 to indicate "no outstanding events") to
QR_EC even when SCI_EVT is not set, but the reporter has complained
about AC/battery pluging/unpluging and video brightness change delay
on that platform.

This is because the work item that has issued QR_EC has to wait until
timeout in this case, and the _Qxx method evaluation work item queued
after QR_EC one is delayed.

It sounds reasonable to fix this issue by:
 1. Implementing SCI_EVT sanity check before issuing QR_EC in the EC
    driver's main state machine.
 2. Moving QR_EC issuing out of the work queue used by _Qxx evaluation
    to a seperate IRQ handling thread.

This patch fixes this issue using solution 1.

By disallowing QR_EC to be issued when SCI_EVT isn't set, we are able to
handle such platform in the EC driver's main state machine. This patch
enhances the state machine in this way to survive with such malfunctioning
EC firmware.

Note that this patch can also fix CLEAR_ON_RESUME quirk which also relies
on the assumption that the platforms are able to respond even when SCI_EVT
isn't set.

Fixes: c0d653412fc8 ACPI / EC: Fix race condition in ec_transaction_completed()
Link: https://bugzilla.kernel.org/show_bug.cgi?id=82611
Reported-and-tested-by: Alexander Mezin <mezin.alexander@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoHID: logitech-dj: prevent false errors to be shown
Benjamin Tissoires [Fri, 22 Aug 2014 20:16:05 +0000 (16:16 -0400)]
HID: logitech-dj: prevent false errors to be shown

commit 5abfe85c1d4694d5d4bbd13ecc166262b937adf0 upstream.

Commit "HID: logitech: perform bounds checking on device_id early
enough" unfortunately leaks some errors to dmesg which are not real
ones:
- if the report is not a DJ one, then there is not point in checking
  the device_id
- the receiver (index 0) can also receive some notifications which
  can be safely ignored given the current implementation

Move out the test regarding the report_id and also discards
printing errors when the receiver got notified.

Fixes: ad3e14d7c5268c2e24477c6ef54bbdf88add5d36

Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: whiteheat: Added bounds checking for bulk command response
James Forshaw [Sat, 23 Aug 2014 21:39:48 +0000 (14:39 -0700)]
USB: whiteheat: Added bounds checking for bulk command response

commit 6817ae225cd650fb1c3295d769298c38b1eba818 upstream.

This patch fixes a potential security issue in the whiteheat USB driver
which might allow a local attacker to cause kernel memory corrpution. This
is due to an unchecked memcpy into a fixed size buffer (of 64 bytes). On
EHCI and XHCI busses it's possible to craft responses greater than 64
bytes leading a buffer overflow.

Signed-off-by: James Forshaw <forshaw@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoHID: fix a couple of off-by-ones
Jiri Kosina [Thu, 21 Aug 2014 14:57:48 +0000 (09:57 -0500)]
HID: fix a couple of off-by-ones

commit 4ab25786c87eb20857bbb715c3ae34ec8fd6a214 upstream.

There are a few very theoretical off-by-one bugs in report descriptor size
checking when performing a pre-parsing fixup. Fix those.

Reported-by: Ben Hawkes <hawkes@google.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoHID: logitech: perform bounds checking on device_id early enough
Jiri Kosina [Thu, 21 Aug 2014 14:57:17 +0000 (09:57 -0500)]
HID: logitech: perform bounds checking on device_id early enough

commit ad3e14d7c5268c2e24477c6ef54bbdf88add5d36 upstream.

device_index is a char type and the size of paired_dj_deivces is 7
elements, therefore proper bounds checking has to be applied to
device_index before it is used.

We are currently performing the bounds checking in
logi_dj_recv_add_djhid_device(), which is too late, as malicious device
could send REPORT_TYPE_NOTIF_DEVICE_UNPAIRED early enough and trigger the
problem in one of the report forwarding functions called from
logi_dj_raw_event().

Fix this by performing the check at the earliest possible ocasion in
logi_dj_raw_event().

Reported-by: Ben Hawkes <hawkes@google.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoisofs: Fix unbounded recursion when processing relocated directories
Jan Kara [Sun, 17 Aug 2014 09:49:57 +0000 (11:49 +0200)]
isofs: Fix unbounded recursion when processing relocated directories

commit 410dd3cf4c9b36f27ed4542ee18b1af5e68645a4 upstream.

We did not check relocated directory in any way when processing Rock
Ridge 'CL' tag. Thus a corrupted isofs image can possibly have a CL
entry pointing to another CL entry leading to possibly unbounded
recursion in kernel code and thus stack overflow or deadlocks (if there
is a loop created from CL entries).

Fix the problem by not allowing CL entry to point to a directory entry
with CL entry (such use makes no good sense anyway) and by checking
whether CL entry doesn't point to itself.

Reported-by: Chris Evans <cevans@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoxhci: rework cycle bit checking for new dequeue pointers
Mathias Nyman [Tue, 19 Aug 2014 12:17:58 +0000 (15:17 +0300)]
xhci: rework cycle bit checking for new dequeue pointers

commit 365038d83313951d6ace15342eb24624bbef1666 upstream.

When we manually need to move the TR dequeue pointer we need to set the
correct cycle bit as well. Previously we used the trb pointer from the
last event received as a base, but this was changed in
commit 1f81b6d22a59 ("usb: xhci: Prefer endpoint context dequeue pointer")
to use the dequeue pointer from the endpoint context instead

It turns out some Asmedia controllers advance the dequeue pointer
stored in the endpoint context past the event triggering TRB, and
this messed up the way the cycle bit was calculated.

Instead of adding a quirk or complicating the already hard to follow cycle bit
code, the whole cycle bit calculation is now simplified and adapted to handle
event and endpoint context dequeue pointer differences.

Fixes: 1f81b6d22a59 ("usb: xhci: Prefer endpoint context dequeue pointer")
Reported-by: Maciej Puzio <mx34567@gmail.com>
Reported-by: Evan Langlois <uudruid74@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: Maciej Puzio <mx34567@gmail.com>
Tested-by: Evan Langlois <uudruid74@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2:
 - Debug logging in xhci_find_new_dequeue_state() is slightly different
 - Don't delete find_trb_seg(); it's still needed by xhci_cmd_to_noop()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoMIPS: OCTEON: make get_system_type() thread-safe
Aaro Koskinen [Tue, 22 Jul 2014 11:51:08 +0000 (14:51 +0300)]
MIPS: OCTEON: make get_system_type() thread-safe

commit 608308682addfdc7b8e2aee88f0e028331d88e4d upstream.

get_system_type() is not thread-safe on OCTEON. It uses static data,
also more dangerous issue is that it's calling cvmx_fuse_read_byte()
every time without any synchronization. Currently it's possible to get
processes stuck looping forever in kernel simply by launching multiple
readers of /proc/cpuinfo:

(while true; do cat /proc/cpuinfo > /dev/null; done) &
(while true; do cat /proc/cpuinfo > /dev/null; done) &
...

Fix by initializing the system type string only once during the early
boot.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: http://patchwork.linux-mips.org/patch/7437/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agousb: xhci: amd chipset also needs short TX quirk
Huang Rui [Tue, 19 Aug 2014 12:17:57 +0000 (15:17 +0300)]
usb: xhci: amd chipset also needs short TX quirk

commit 2597fe99bb0259387111d0431691f5daac84f5a5 upstream.

AMD xHC also needs short tx quirk after tested on most of chipset
generations. That's because there is the same incorrect behavior like
Fresco Logic host. Please see below message with on USB webcam
attached on xHC host:

[  139.262944] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.266934] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.270913] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.274937] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.278914] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.282936] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.286915] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.290938] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.294913] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.298917] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?

Reported-by: Arindam Nath <arindam.nath@amd.com>
Tested-by: Shriraj-Rai P <shriraj-rai.p@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoxhci: Treat not finding the event_seg on COMP_STOP the same as COMP_STOP_INVAL
Hans de Goede [Tue, 19 Aug 2014 12:17:56 +0000 (15:17 +0300)]
xhci: Treat not finding the event_seg on COMP_STOP the same as COMP_STOP_INVAL

commit 9a54886342e227433aebc9d374f8ae268a836475 upstream.

When using a Renesas uPD720231 chipset usb-3 uas to sata bridge with a 120G
Crucial M500 ssd, model string: Crucial_ CT120M500SSD1, together with a
the integrated Intel xhci controller on a Haswell laptop:

00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04)

The following error gets logged to dmesg:

xhci error: Transfer event TRB DMA ptr not part of current TD

Treating COMP_STOP the same as COMP_STOP_INVAL when no event_seg gets found
fixes this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agokvm: iommu: fix the third parameter of kvm_iommu_put_pages (CVE-2014-3601)
Michael S. Tsirkin [Tue, 19 Aug 2014 11:14:50 +0000 (19:14 +0800)]
kvm: iommu: fix the third parameter of kvm_iommu_put_pages (CVE-2014-3601)

commit 350b8bdd689cd2ab2c67c8a86a0be86cfa0751a7 upstream.

The third parameter of kvm_iommu_put_pages is wrong,
It should be 'gfn - slot->base_gfn'.

By making gfn very large, malicious guest or userspace can cause kvm to
go to this error path, and subsequently to pass a huge value as size.
Alternatively if gfn is small, then pages would be pinned but never
unpinned, causing host memory leak and local DOS.

Passing a reasonable but large value could be the most dangerous case,
because it would unpin a page that should have stayed pinned, and thus
allow the device to DMA into arbitrary memory.  However, this cannot
happen because of the condition that can trigger the error:

- out of memory (where you can't allocate even a single page)
  should not be possible for the attacker to trigger

- when exceeding the iommu's address space, guest pages after gfn
  will also exceed the iommu's address space, and inside
  kvm_iommu_put_pages() the iommu_iova_to_phys() will fail.  The
  page thus would not be unpinned at all.

Reported-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agopata_scc: propagate return value of scc_wait_after_reset
Arjun Sreedharan [Sun, 17 Aug 2014 14:30:09 +0000 (20:00 +0530)]
pata_scc: propagate return value of scc_wait_after_reset

commit 4dc7c76cd500fa78c64adfda4b070b870a2b993c upstream.

scc_bus_softreset not necessarily should return zero.
Propagate the error code.

Signed-off-by: Arjun Sreedharan <arjun024@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoiommu/amd: Fix cleanup_domain for mass device removal
Joerg Roedel [Tue, 5 Aug 2014 15:50:15 +0000 (17:50 +0200)]
iommu/amd: Fix cleanup_domain for mass device removal

commit 9b29d3c6510407d91786c1cf9183ff4debb3473a upstream.

When multiple devices are detached in __detach_device, they
are also removed from the domains dev_list. This makes it
unsafe to use list_for_each_entry_safe, as the next pointer
might also not be in the list anymore after __detach_device
returns. So just repeatedly remove the first element of the
list until it is empty.

Tested-by: Marti Raudsepp <marti@juffo.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: ftdi_sio: Added PID for new ekey device
Jaša Bartelj [Sat, 16 Aug 2014 10:44:27 +0000 (12:44 +0200)]
USB: ftdi_sio: Added PID for new ekey device

commit 646907f5bfb0782c731ae9ff6fb63471a3566132 upstream.

Added support to the ftdi_sio driver for ekey Converter USB which
uses an FT232BM chip.

Signed-off-by: Jaša Bartelj <jasa.bartelj@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: serial: pl2303: add device id for ztek device
Greg KH [Fri, 15 Aug 2014 07:22:21 +0000 (15:22 +0800)]
USB: serial: pl2303: add device id for ztek device

commit 91fcb1ce420e0a5f8d92d556d7008a78bc6ce1eb upstream.

This adds a new device id to the pl2303 driver for the ZTEK device.

Reported-by: Mike Chu <Mike-Chu@prolific.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: ftdi_sio: add Basic Micro ATOM Nano USB2Serial PID
Johan Hovold [Wed, 13 Aug 2014 15:56:52 +0000 (17:56 +0200)]
USB: ftdi_sio: add Basic Micro ATOM Nano USB2Serial PID

commit 6552cc7f09261db2aeaae389aa2c05a74b3a93b4 upstream.

Add device id for Basic Micro ATOM Nano USB2Serial adapters.

Reported-by: Nicolas Alt <n.alt@mytum.de>
Tested-by: Nicolas Alt <n.alt@mytum.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: option: add VIA Telecom CDS7 chipset device id
Brennan Ashton [Wed, 6 Aug 2014 15:46:44 +0000 (08:46 -0700)]
USB: option: add VIA Telecom CDS7 chipset device id

commit d77302739d900bbca5e901a3b7ac48c907ee6c93 upstream.

This VIA Telecom baseband processor is used is used by by u-blox in both the
FW2770 and FW2760 products and may be used in others as well.

This patch has been tested on both of these modem versions.

Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agomd/raid6: avoid data corruption during recovery of double-degraded RAID6
NeilBrown [Tue, 12 Aug 2014 23:57:07 +0000 (09:57 +1000)]
md/raid6: avoid data corruption during recovery of double-degraded RAID6

commit 9c4bdf697c39805078392d5ddbbba5ae5680e0dd upstream.

During recovery of a double-degraded RAID6 it is possible for
some blocks not to be recovered properly, leading to corruption.

If a write happens to one block in a stripe that would be written to a
missing device, and at the same time that stripe is recovering data
to the other missing device, then that recovered data may not be written.

This patch skips, in the double-degraded case, an optimisation that is
only safe for single-degraded arrays.

Bug was introduced in 2.6.32 and fix is suitable for any kernel since
then.  In an older kernel with separate handle_stripe5() and
handle_stripe6() functions the patch must change handle_stripe6().

Fixes: 6c0069c0ae9659e3a91b68eaed06a5c6c37f45c8
Cc: Yuri Tikhonov <yur@emcraft.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Reported-by: "Manibalan P" <pmanibalan@amiindia.co.in>
Tested-by: "Manibalan P" <pmanibalan@amiindia.co.in>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1090423
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoCIFS: Fix wrong directory attributes after rename
Pavel Shilovsky [Mon, 18 Aug 2014 16:49:58 +0000 (20:49 +0400)]
CIFS: Fix wrong directory attributes after rename

commit b46799a8f28c43c5264ac8d8ffa28b311b557e03 upstream.

When we requests rename we also need to update attributes
of both source and target parent directories. Not doing it
causes generic/309 xfstest to fail on SMB2 mounts. Fix this
by marking these directories for force revalidating.

Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoALSA: hda/realtek - Avoid setting wrong COEF on ALC269 & co
Takashi Iwai [Fri, 15 Aug 2014 15:35:00 +0000 (17:35 +0200)]
ALSA: hda/realtek - Avoid setting wrong COEF on ALC269 & co

commit f3ee07d8b6e061bf34a7167c3f564e8da4360a99 upstream.

ALC269 & co have many vendor-specific setups with COEF verbs.
However, some verbs seem specific to some codec versions and they
result in the codec stalling.  Typically, such a case can be avoided
by checking the return value from reading a COEF.  If the return value
is -1, it implies that the COEF is invalid, thus it shouldn't be
written.

This patch adds the invalid COEF checks in appropriate places
accessing ALC269 and its variants.  The patch actually fixes the
resume problem on Acer AO725 laptop.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181
Tested-by: Francesco Muzio <muziofg@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoBtrfs: fix csum tree corruption, duplicate and outdated checksums
Filipe Manana [Sat, 9 Aug 2014 20:22:27 +0000 (21:22 +0100)]
Btrfs: fix csum tree corruption, duplicate and outdated checksums

commit 27b9a8122ff71a8cadfbffb9c4f0694300464f3b upstream.

Under rare circumstances we can end up leaving 2 versions of a checksum
for the same file extent range.

The reason for this is that after calling btrfs_next_leaf we process
slot 0 of the leaf it returns, instead of processing the slot set in
path->slots[0]. Most of the time (by far) path->slots[0] is 0, but after
btrfs_next_leaf() releases the path and before it searches for the next
leaf, another task might cause a split of the next leaf, which migrates
some of its keys to the leaf we were processing before calling
btrfs_next_leaf(). In this case btrfs_next_leaf() returns again the
same leaf but with path->slots[0] having a slot number corresponding
to the first new key it got, that is, a slot number that didn't exist
before calling btrfs_next_leaf(), as the leaf now has more keys than
it had before. So we must really process the returned leaf starting at
path->slots[0] always, as it isn't always 0, and the key at slot 0 can
have an offset much lower than our search offset/bytenr.

For example, consider the following scenario, where we have:

sums->bytenr: 40157184, sums->len: 16384, sums end: 40173568
four 4kb file data blocks with offsets 40157184401612804016537640169472

  Leaf N:

    slot = 0                           slot = btrfs_header_nritems() - 1
  |-------------------------------------------------------------------|
  | [(CSUM CSUM 39239680), size 8] ... [(CSUM CSUM 40116224), size 4] |
  |-------------------------------------------------------------------|

  Leaf N + 1:

      slot = 0                          slot = btrfs_header_nritems() - 1
  |--------------------------------------------------------------------|
  | [(CSUM CSUM 40161280), size 32] ... [((CSUM CSUM 40615936), size 8 |
  |--------------------------------------------------------------------|

Because we are at the last slot of leaf N, we call btrfs_next_leaf() to
find the next highest key, which releases the current path and then searches
for that next key. However after releasing the path and before finding that
next key, the item at slot 0 of leaf N + 1 gets moved to leaf N, due to a call
to ctree.c:push_leaf_left() (via ctree.c:split_leaf()), and therefore
btrfs_next_leaf() will returns us a path again with leaf N but with the slot
pointing to its new last key (CSUM CSUM 40161280). This new version of leaf N
is then:

    slot = 0                        slot = btrfs_header_nritems() - 2  slot = btrfs_header_nritems() - 1
  |----------------------------------------------------------------------------------------------------|
  | [(CSUM CSUM 39239680), size 8] ... [(CSUM CSUM 40116224), size 4]  [(CSUM CSUM 40161280), size 32] |
  |----------------------------------------------------------------------------------------------------|

And incorrecly using slot 0, makes us set next_offset to 39239680 and we jump
into the "insert:" label, which will set tmp to:

    tmp = min((sums->len - total_bytes) >> blocksize_bits,
        (next_offset - file_key.offset) >> blocksize_bits) =
    min((16384 - 0) >> 12, (39239680 - 40157184) >> 12) =
    min(4, (u64)-917504 = 18446744073708634112 >> 12) = 4

and

   ins_size = csum_size * tmp = 4 * 4 = 16 bytes.

In other words, we insert a new csum item in the tree with key
(CSUM_OBJECTID CSUM_KEY 40157184 = sums->bytenr) that contains the checksums
for all the data (4 blocks of 4096 bytes each = sums->len). Which is wrong,
because the item with key (CSUM CSUM 40161280) (the one that was moved from
leaf N + 1 to the end of leaf N) contains the old checksums of the last 12288
bytes of our data and won't get those old checksums removed.

So this leaves us 2 different checksums for 3 4kb blocks of data in the tree,
and breaks the logical rule:

   Key_N+1.offset >= Key_N.offset + length_of_data_its_checksums_cover

An obvious bad effect of this is that a subsequent csum tree lookup to get
the checksum of any of the blocks with logical offset of 4016128040165376
or 40169472 (the last 3 4kb blocks of file data), will get the old checksums.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoASoC: pxa-ssp: drop SNDRV_PCM_FMTBIT_S24_LE
Daniel Mack [Wed, 13 Aug 2014 19:51:06 +0000 (21:51 +0200)]
ASoC: pxa-ssp: drop SNDRV_PCM_FMTBIT_S24_LE

commit 9301503af016eb537ccce76adec0c1bb5c84871e upstream.

This mode is unsupported, as the DMA controller can't do zero-padding
of samples.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agopowerpc/mm: Use read barrier when creating real_pte
Aneesh Kumar K.V [Wed, 13 Aug 2014 07:02:03 +0000 (12:32 +0530)]
powerpc/mm: Use read barrier when creating real_pte

commit 85c1fafd7262e68ad821ee1808686b1392b1167d upstream.

On ppc64 we support 4K hash pte with 64K page size. That requires
us to track the hash pte slot information on a per 4k basis. We do that
by storing the slot details in the second half of pte page. The pte bit
_PAGE_COMBO is used to indicate whether the second half need to be
looked while building real_pte. We need to use read memory barrier while
doing that so that load of hidx is not reordered w.r.t _PAGE_COMBO
check. On the store side we already do a lwsync in __hash_page_4K

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[bwh: Backported to 3.2: include <asm/system.h> to ensure smp_rmb()
 is defined; cell_defconfig fails to build without this]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agopowerpc: Fix build errors STRICT_MM_TYPECHECKS
Aneesh Kumar K.V [Mon, 6 May 2013 10:51:00 +0000 (10:51 +0000)]
powerpc: Fix build errors STRICT_MM_TYPECHECKS

commit 83d5e64b7efa7f39b10ff5e92792e807a720289c upstream.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoreiserfs: Fix use after free in journal teardown
Jan Kara [Wed, 6 Aug 2014 17:43:56 +0000 (19:43 +0200)]
reiserfs: Fix use after free in journal teardown

commit 01777836c87081e4f68c4a43c9abe6114805f91e upstream.

If do_journal_release() races with do_journal_end() which requeues
delayed works for transaction flushing, we can leave work items for
flushing outstanding transactions queued while freeing them. That
results in use after free and possible crash in run_timers_softirq().

Fix the problem by not requeueing works if superblock is being shut down
(MS_ACTIVE not set) and using cancel_delayed_work_sync() in
do_journal_release().

Signed-off-by: Jan Kara <jack@suse.cz>
[bwh: Backported to 3.2:
 - Adjust context
 - commit_wq is global, not per-superblock
 - Change comment about 'these works'; we only have one work item
 - Drop inapplicable changes to reiserfs_schedule_old_flush()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agocarl9170: fix sending URBs with wrong type when using full-speed
Ronald Wahl [Thu, 7 Aug 2014 12:15:50 +0000 (14:15 +0200)]
carl9170: fix sending URBs with wrong type when using full-speed

commit 671796dd96b6cd85b75fba9d3007bcf7e5f7c309 upstream.

The driver assumes that endpoint 4 is always an interrupt endpoint.
Unfortunately the type differs between high-speed and full-speed
configurations while in the former case it is indeed an interrupt
endpoint this is not true for the latter case - here it is a bulk
endpoint. When sending URBs with the wrong type the kernel will
generate a warning message including backtrace. In this specific
case there will be a huge amount of warnings which can bring the system
to freeze.

To fix this we are now sending URBs to endpoint 4 using the type
found in the endpoint descriptor.

A side note: The carl9170 firmware currently specifies endpoint 4 as
interrupt endpoint even in the full-speed configuration but this has
no relevance because before this firmware is loaded the endpoint type
is as described above and after the firmware is running the stick is not
reenumerated and so the old descriptor is used.

Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agox86/xen: resume timer irqs early
David Vrabel [Thu, 7 Aug 2014 16:06:06 +0000 (17:06 +0100)]
x86/xen: resume timer irqs early

commit 8d5999df35314607c38fbd6bdd709e25c3a4eeab upstream.

If the timer irqs are resumed during device resume it is possible in
certain circumstances for the resume to hang early on, before device
interrupts are resumed.  For an Ubuntu 14.04 PVHVM guest this would
occur in ~0.5% of resume attempts.

It is not entirely clear what is occuring the point of the hang but I
think a task necessary for the resume calls schedule_timeout(),
waiting for a timer interrupt (which never arrives).  This failure may
require specific tasks to be running on the other VCPUs to trigger
(processes are not frozen during a suspend/resume if PREEMPT is
disabled).

Add IRQF_EARLY_RESUME to the timer interrupts so they are resumed in
syscore_resume().

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoring-buffer: Always reset iterator to reader page
Steven Rostedt (Red Hat) [Wed, 6 Aug 2014 18:11:33 +0000 (14:11 -0400)]
ring-buffer: Always reset iterator to reader page

commit 651e22f2701b4113989237c3048d17337dd2185c upstream.

When performing a consuming read, the ring buffer swaps out a
page from the ring buffer with a empty page and this page that
was swapped out becomes the new reader page. The reader page
is owned by the reader and since it was swapped out of the ring
buffer, writers do not have access to it (there's an exception
to that rule, but it's out of scope for this commit).

When reading the "trace" file, it is a non consuming read, which
means that the data in the ring buffer will not be modified.
When the trace file is opened, a ring buffer iterator is allocated
and writes to the ring buffer are disabled, such that the iterator
will not have issues iterating over the data.

Although the ring buffer disabled writes, it does not disable other
reads, or even consuming reads. If a consuming read happens, then
the iterator is reset and starts reading from the beginning again.

My tests would sometimes trigger this bug on my i386 box:

WARNING: CPU: 0 PID: 5175 at kernel/trace/trace.c:1527 __trace_find_cmdline+0x66/0xaa()
Modules linked in:
CPU: 0 PID: 5175 Comm: grep Not tainted 3.16.0-rc3-test+ #8
Hardware name:                  /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006
 00000000 00000000 f09c9e1c c18796b3 c1b5d74c f09c9e4c c103a0e3 c1b5154b
 f09c9e78 00001437 c1b5d74c 000005f7 c10bd85a c10bd85a c1cac57c f09c9eb0
 ed0e0000 f09c9e64 c103a185 00000009 f09c9e5c c1b5154b f09c9e78 f09c9e80^M
Call Trace:
 [<c18796b3>] dump_stack+0x4b/0x75
 [<c103a0e3>] warn_slowpath_common+0x7e/0x95
 [<c10bd85a>] ? __trace_find_cmdline+0x66/0xaa
 [<c10bd85a>] ? __trace_find_cmdline+0x66/0xaa
 [<c103a185>] warn_slowpath_fmt+0x33/0x35
 [<c10bd85a>] __trace_find_cmdline+0x66/0xaa^M
 [<c10bed04>] trace_find_cmdline+0x40/0x64
 [<c10c3c16>] trace_print_context+0x27/0xec
 [<c10c4360>] ? trace_seq_printf+0x37/0x5b
 [<c10c0b15>] print_trace_line+0x319/0x39b
 [<c10ba3fb>] ? ring_buffer_read+0x47/0x50
 [<c10c13b1>] s_show+0x192/0x1ab
 [<c10bfd9a>] ? s_next+0x5a/0x7c
 [<c112e76e>] seq_read+0x267/0x34c
 [<c1115a25>] vfs_read+0x8c/0xef
 [<c112e507>] ? seq_lseek+0x154/0x154
 [<c1115ba2>] SyS_read+0x54/0x7f
 [<c188488e>] syscall_call+0x7/0xb
---[ end trace 3f507febd6b4cc83 ]---
>>>> ##### CPU 1 buffer started ####

Which was the __trace_find_cmdline() function complaining about the pid
in the event record being negative.

After adding more test cases, this would trigger more often. Strangely
enough, it would never trigger on a single test, but instead would trigger
only when running all the tests. I believe that was the case because it
required one of the tests to be shutting down via delayed instances while
a new test started up.

After spending several days debugging this, I found that it was caused by
the iterator becoming corrupted. Debugging further, I found out why
the iterator became corrupted. It happened with the rb_iter_reset().

As consuming reads may not read the full reader page, and only part
of it, there's a "read" field to know where the last read took place.
The iterator, must also start at the read position. In the rb_iter_reset()
code, if the reader page was disconnected from the ring buffer, the iterator
would start at the head page within the ring buffer (where writes still
happen). But the mistake there was that it still used the "read" field
to start the iterator on the head page, where it should always start
at zero because readers never read from within the ring buffer where
writes occur.

I originally wrote a patch to have it set the iter->head to 0 instead
of iter->head_page->read, but then I questioned why it wasn't always
setting the iter to point to the reader page, as the reader page is
still valid.  The list_empty(reader_page->list) just means that it was
successful in swapping out. But the reader_page may still have data.

There was a bug report a long time ago that was not reproducible that
had something about trace_pipe (consuming read) not matching trace
(iterator read). This may explain why that happened.

Anyway, the correct answer to this bug is to always use the reader page
an not reset the iterator to inside the writable ring buffer.

Fixes: d769041f8653 "ring_buffer: implement new locking"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoring-buffer: Up rb_iter_peek() loop count to 3
Steven Rostedt (Red Hat) [Wed, 6 Aug 2014 19:36:31 +0000 (15:36 -0400)]
ring-buffer: Up rb_iter_peek() loop count to 3

commit 021de3d904b88b1771a3a2cfc5b75023c391e646 upstream.

After writting a test to try to trigger the bug that caused the
ring buffer iterator to become corrupted, I hit another bug:

 WARNING: CPU: 1 PID: 5281 at kernel/trace/ring_buffer.c:3766 rb_iter_peek+0x113/0x238()
 Modules linked in: ipt_MASQUERADE sunrpc [...]
 CPU: 1 PID: 5281 Comm: grep Tainted: G        W     3.16.0-rc3-test+ #143
 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
  0000000000000000 ffffffff81809a80 ffffffff81503fb0 0000000000000000
  ffffffff81040ca1 ffff8800796d6010 ffffffff810c138d ffff8800796d6010
  ffff880077438c80 ffff8800796d6010 ffff88007abbe600 0000000000000003
 Call Trace:
  [<ffffffff81503fb0>] ? dump_stack+0x4a/0x75
  [<ffffffff81040ca1>] ? warn_slowpath_common+0x7e/0x97
  [<ffffffff810c138d>] ? rb_iter_peek+0x113/0x238
  [<ffffffff810c138d>] ? rb_iter_peek+0x113/0x238
  [<ffffffff810c14df>] ? ring_buffer_iter_peek+0x2d/0x5c
  [<ffffffff810c6f73>] ? tracing_iter_reset+0x6e/0x96
  [<ffffffff810c74a3>] ? s_start+0xd7/0x17b
  [<ffffffff8112b13e>] ? kmem_cache_alloc_trace+0xda/0xea
  [<ffffffff8114cf94>] ? seq_read+0x148/0x361
  [<ffffffff81132d98>] ? vfs_read+0x93/0xf1
  [<ffffffff81132f1b>] ? SyS_read+0x60/0x8e
  [<ffffffff8150bf9f>] ? tracesys+0xdd/0xe2

Debugging this bug, which triggers when the rb_iter_peek() loops too
many times (more than 2 times), I discovered there's a case that can
cause that function to legitimately loop 3 times!

rb_iter_peek() is different than rb_buffer_peek() as the rb_buffer_peek()
only deals with the reader page (it's for consuming reads). The
rb_iter_peek() is for traversing the buffer without consuming it, and as
such, it can loop for one more reason. That is, if we hit the end of
the reader page or any page, it will go to the next page and try again.

That is, we have this:

 1. iter->head > iter->head_page->page->commit
    (rb_inc_iter() which moves the iter to the next page)
    try again

 2. event = rb_iter_head_event()
    event->type_len == RINGBUF_TYPE_TIME_EXTEND
    rb_advance_iter()
    try again

 3. read the event.

But we never get to 3, because the count is greater than 2 and we
cause the WARNING and return NULL.

Up the counter to 3.

Fixes: 69d1b839f7ee "ring-buffer: Bind time extend and data events together"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[bwh: Backported to 3.2: drop inapplicable spelling correction]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agos390/locking: Reenable optimistic spinning
Christian Borntraeger [Tue, 5 Aug 2014 07:57:51 +0000 (09:57 +0200)]
s390/locking: Reenable optimistic spinning

commit 36e7fdaa1a04fcf65b864232e1af56a51c7814d6 upstream.

commit 4badad352a6bb202ec68afa7a574c0bb961e5ebc (locking/mutex: Disable
optimistic spinning on some architectures) fenced spinning for
architectures without proper cmpxchg.
There is no need to disable mutex spinning on s390, though:
The instructions CS,CSG and friends provide the proper guarantees.
(We dont implement cmpxchg with locks).

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agohwmon: (ads1015) Fix out-of-bounds array access
Axel Lin [Tue, 5 Aug 2014 01:59:49 +0000 (09:59 +0800)]
hwmon: (ads1015) Fix out-of-bounds array access

commit e981429557cbe10c780fab1c1a237cb832757652 upstream.

Current code uses data_rate as array index in ads1015_read_adc() and uses pga
as array index in ads1015_reg_to_mv, so we must make sure both data_rate and
pga settings are in valid value range.
Return -EINVAL if the setting is out-of-range.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agohwmon: (lm92) Prevent overflow problem when writing large limits
Axel Lin [Tue, 5 Aug 2014 02:08:31 +0000 (10:08 +0800)]
hwmon: (lm92) Prevent overflow problem when writing large limits

commit 5b963089161b8fb244889c972edf553b9d737545 upstream.

On platforms with sizeof(int) < sizeof(long), writing a temperature
limit larger than MAXINT will result in unpredictable limit values
written to the chip. Avoid auto-conversion from long to int to fix
the problem.

The hysteresis temperature range depends on the value of
data->temp[attr->index], since val is subtracted from it.
Use a wider clamp, [-120000, 220000] should do to cover the
possible range. Also add missing TEMP_TO_REG() on writes into
cached hysteresis value.

Also uses clamp_val to simplify the code a bit.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
[Guenter Roeck: Fixed double TEMP_TO_REG on hysteresis updates]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[bwh: Backported to 3.2:
 - s/temp\[attr->index\]/temp1_crit/
 - s/temp\[t_hyst\]/temp1_hyst/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoRDMA/iwcm: Use a default listen backlog if needed
Steve Wise [Fri, 25 Jul 2014 14:11:33 +0000 (09:11 -0500)]
RDMA/iwcm: Use a default listen backlog if needed

commit 2f0304d21867476394cd51a54e97f7273d112261 upstream.

If the user creates a listening cm_id with backlog of 0 the IWCM ends
up not allowing any connection requests at all.  The correct behavior
is for the IWCM to pick a default value if the user backlog parameter
is zero.

Lustre from version 1.8.8 onward uses a backlog of 0, which breaks
iwarp support without this fix.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
[bwh: Backported to 3.2: use register_net_sysctl_table()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agodrm/radeon: load the lm63 driver for an lm64 thermal chip.
Alex Deucher [Mon, 28 Jul 2014 03:21:50 +0000 (23:21 -0400)]
drm/radeon: load the lm63 driver for an lm64 thermal chip.

commit 5dc355325b648dc9b4cf3bea4d968de46fd59215 upstream.

Looks like the lm63 driver supports the lm64 as well.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agopowerpc/mm/numa: Fix break placement
Andrey Utkin [Mon, 4 Aug 2014 20:13:10 +0000 (23:13 +0300)]
powerpc/mm/numa: Fix break placement

commit b00fc6ec1f24f9d7af9b8988b6a198186eb3408c upstream.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81631
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agodrm/ttm: Fix possible stack overflow by recursive shrinker calls.
Tetsuo Handa [Sun, 3 Aug 2014 11:02:03 +0000 (20:02 +0900)]
drm/ttm: Fix possible stack overflow by recursive shrinker calls.

commit 71336e011d1d2312bcbcaa8fcec7365024f3a95d upstream.

While ttm_dma_pool_shrink_scan() tries to take mutex before doing GFP_KERNEL
allocation, ttm_pool_shrink_scan() does not do it. This can result in stack
overflow if kmalloc() in ttm_page_pool_free() triggered recursion due to
memory pressure.

  shrink_slab()
  => ttm_pool_shrink_scan()
     => ttm_page_pool_free()
        => kmalloc(GFP_KERNEL)
           => shrink_slab()
              => ttm_pool_shrink_scan()
                 => ttm_page_pool_free()
                    => kmalloc(GFP_KERNEL)

Change ttm_pool_shrink_scan() to do like ttm_dma_pool_shrink_scan() does.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[bwh: Backported to 3.2:
 - Adjust context
 - Change return value in the contended case to follow the old shrinker
   API]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agohwmon: (sis5595) Prevent overflow problem when writing large limits
Axel Lin [Thu, 31 Jul 2014 14:27:04 +0000 (22:27 +0800)]
hwmon: (sis5595) Prevent overflow problem when writing large limits

commit cc336546ddca8c22de83720632431c16a5f9fe9a upstream.

On platforms with sizeof(int) < sizeof(long), writing a temperature
limit larger than MAXINT will result in unpredictable limit values
written to the chip. Avoid auto-conversion from long to int to fix
the problem.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agohwmon: (gpio-fan) Prevent overflow problem when writing large limits
Axel Lin [Sat, 2 Aug 2014 05:36:38 +0000 (13:36 +0800)]
hwmon: (gpio-fan) Prevent overflow problem when writing large limits

commit 2565fb05d1e9fc0831f7b1c083bcfcb1cba1f020 upstream.

On platforms with sizeof(int) < sizeof(unsigned long), writing a rpm value
larger than MAXINT will result in unpredictable limit values written to the
chip. Avoid auto-conversion from unsigned long to int to fix the problem.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoALSA: virtuoso: add Xonar Essence STX II support
Clemens Ladisch [Mon, 4 Aug 2014 13:17:55 +0000 (15:17 +0200)]
ALSA: virtuoso: add Xonar Essence STX II support

commit f42bb22243d2ae264d721b055f836059fe35321f upstream.

Just add the PCI ID for the STX II.  It appears to work the same as the
STX, except for the addition of the not-yet-supported daughterboard.

Tested-by: Mario <fugazzi99@gmail.com>
Tested-by: corubba <corubba@gmx.de>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoALSA: virtuoso: Xonar DSX support
Sergiu Giurgiu [Sun, 9 Sep 2012 09:14:15 +0000 (05:14 -0400)]
ALSA: virtuoso: Xonar DSX support

commit 4492363251235c4499a2d073c5f09121ea23d39d upstream.

This patch adds support for ASUS - Xonar DSX sound cards. Tested on
openSUSE 12.2 with kernel:
Linux 3.4.6-2.10-desktop #1 SMP PREEMPT Thu Jul 26 09:36:26 UTC 2012 (641c197) x86_64 x86_64 x86_64 GNU/Linux
Works:
 - play sounds
 - adjust volume on master channel.
 - mute .

Since Xonar DS uses the same chip, everything that works for DS should
work for DSX as well.

Signed-off-by: Sergiu Giurgiu <sgiurgiu11@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: serial: ftdi_sio: Add support for new Xsens devices
Patrick Riphagen [Thu, 24 Jul 2014 07:09:50 +0000 (09:09 +0200)]
USB: serial: ftdi_sio: Add support for new Xsens devices

commit 4bdcde358b4bda74e356841d351945ca3f2245dd upstream.

This adds support for new Xsens devices, using Xsens' own Vendor ID.

Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: serial: ftdi_sio: Annotate the current Xsens PID assignments
Patrick Riphagen [Thu, 24 Jul 2014 07:12:52 +0000 (09:12 +0200)]
USB: serial: ftdi_sio: Annotate the current Xsens PID assignments

commit 9273b8a270878906540349422ab24558b9d65716 upstream.

The converters are used in specific products. It can be useful to know
which they are exactly.

Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agonetlabel: fix a problem when setting bits below the previously lowest bit
Paul Moore [Fri, 1 Aug 2014 15:17:03 +0000 (11:17 -0400)]
netlabel: fix a problem when setting bits below the previously lowest bit

commit 41c3bd2039e0d7b3dc32313141773f20716ec524 upstream.

The NetLabel category (catmap) functions have a problem in that they
assume categories will be set in an increasing manner, e.g. the next
category set will always be larger than the last.  Unfortunately, this
is not a valid assumption and could result in problems when attempting
to set categories less than the startbit in the lowest catmap node.
In some cases kernel panics and other nasties can result.

This patch corrects the problem by checking for this and allocating a
new catmap node instance and placing it at the front of the list.

Reported-by: Christian Evans <frodox@zoho.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
[bwh: Backported to 3.2: adjust filename for SMACK]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agonetlabel: use GFP flags from caller instead of GFP_ATOMIC
Dan Carpenter [Wed, 21 Mar 2012 20:41:01 +0000 (20:41 +0000)]
netlabel: use GFP flags from caller instead of GFP_ATOMIC

commit 64b5fad526f63e9b56752a7e8e153b99ec0ddecd upstream.

This function takes a GFP flags as a parameter, but they are never used.
We don't take a lock in this function so there is no reason to prefer
GFP_ATOMIC over the caller's GFP flags.

There is only one caller, cipso_v4_map_cat_rng_ntoh(), and it passes
GFP_ATOMIC as the GFP flags so this doesn't change how the code works.
It's just a cleanup.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoARM: OMAP3: Fix choice of omap3_restore_es function in OMAP34XX rev3.1.2 case.
Jeremy Vial [Thu, 31 Jul 2014 13:10:33 +0000 (15:10 +0200)]
ARM: OMAP3: Fix choice of omap3_restore_es function in OMAP34XX rev3.1.2 case.

commit 9b5f7428f8b16bd8980213f2b70baf1dd0b9e36c upstream.

According to the comment “restore_es3: applies to 34xx >= ES3.0" in
"arch/arm/mach-omap2/sleep34xx.S”, omap3_restore_es3 should be used
if the revision of an OMAP34xx is ES3.1.2.

Signed-off-by: Jeremy Vial <jvial@adeneo-embedded.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agomnt: Change the default remount atime from relatime to the existing value
Eric W. Biederman [Tue, 29 Jul 2014 00:36:04 +0000 (17:36 -0700)]
mnt: Change the default remount atime from relatime to the existing value

commit ffbc6f0ead47fa5a1dc9642b0331cb75c20a640e upstream.

Since March 2009 the kernel has treated the state that if no
MS_..ATIME flags are passed then the kernel defaults to relatime.

Defaulting to relatime instead of the existing atime state during a
remount is silly, and causes problems in practice for people who don't
specify any MS_...ATIME flags and to get the default filesystem atime
setting.  Those users may encounter a permission error because the
default atime setting does not work.

A default that does not work and causes permission problems is
ridiculous, so preserve the existing value to have a default
atime setting that is always guaranteed to work.

Using the default atime setting in this way is particularly
interesting for applications built to run in restricted userspace
environments without /proc mounted, as the existing atime mount
options of a filesystem can not be read from /proc/mounts.

In practice this fixes user space that uses the default atime
setting on remount that are broken by the permission checks
keeping less privileged users from changing more privileged users
atime settings.

Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
[bwh: Backported to 3.2: add definition of MNT_ATIME_MASK, as we don't
 need the fix that introduced that definition upstream]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agocrypto: af_alg - properly label AF_ALG socket
Milan Broz [Tue, 29 Jul 2014 18:41:09 +0000 (18:41 +0000)]
crypto: af_alg - properly label AF_ALG socket

commit 4c63f83c2c2e16a13ce274ee678e28246bd33645 upstream.

Th AF_ALG socket was missing a security label (e.g. SELinux)
which means that socket was in "unlabeled" state.

This was recently demonstrated in the cryptsetup package
(cryptsetup v1.6.5 and later.)
See https://bugzilla.redhat.com/show_bug.cgi?id=1115120

This patch clones the sock's label from the parent sock
and resolves the issue (similar to AF_BLUETOOTH protocol family).

Signed-off-by: Milan Broz <gmazyland@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoMIPS: GIC: Prevent array overrun
Jeffrey Deans [Thu, 17 Jul 2014 08:20:56 +0000 (09:20 +0100)]
MIPS: GIC: Prevent array overrun

commit ffc8415afab20bd97754efae6aad1f67b531132b upstream.

A GIC interrupt which is declared as having a GIC_MAP_TO_NMI_MSK
mapping causes the cpu parameter to gic_setup_intr() to be increased
to 32, causing memory corruption when pcpu_masks[] is written to again
later in the function.

Signed-off-by: Jeffrey Deans <jeffrey.deans@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7375/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agohwmon: (amc6821) Fix possible race condition bug
Axel Lin [Thu, 31 Jul 2014 01:43:19 +0000 (09:43 +0800)]
hwmon: (amc6821) Fix possible race condition bug

commit cf44819c98db11163f58f08b822d626c7a8f5188 upstream.

Ensure mutex lock protects the read-modify-write period to prevent possible
race condition bug.
In additional, update data->valid should also be protected by the mutex lock.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agohwmon: (amc6821) Fix return value
Sachin Kamat [Wed, 11 Sep 2013 04:19:50 +0000 (09:49 +0530)]
hwmon: (amc6821) Fix return value

commit 3499e5b2e14b792fe411302fea3b6fcc4ba40ef2 upstream.

Propagate return value obtained from i2c_smbus_read_byte_data()
instead of hardcoding.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: T. Mertelj <tomaz.mertelj@guest.arnes.si>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agohwmon: (lm78) Fix overflow problems seen when writing large temperature limits
Guenter Roeck [Wed, 30 Jul 2014 03:48:59 +0000 (20:48 -0700)]
hwmon: (lm78) Fix overflow problems seen when writing large temperature limits

commit 1074d683a51f1aded3562add9ef313e75d557327 upstream.

On platforms with sizeof(int) < sizeof(long), writing a temperature
limit larger than MAXINT will result in unpredictable limit values
written to the chip. Avoid auto-conversion from long to int to fix
the problem.

Cc: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agohwmon: (lm85) Fix various errors on attribute writes
Guenter Roeck [Wed, 30 Jul 2014 05:23:12 +0000 (22:23 -0700)]
hwmon: (lm85) Fix various errors on attribute writes

commit 3248c3b771ddd9d31695da17ba350eb6e1b80a53 upstream.

Temperature limit register writes did not account for negative numbers.
As a result, writing -127000 resulted in -126000 written into the
temperature limit register. This problem affected temp[1-3]_min,
temp[1-3]_max, temp[1-3]_auto_temp_crit, and temp[1-3]_auto_temp_min.

When writing pwm[1-3]_freq, a long variable was auto-converted into an int
without range check. Wiring values larger than MAXINT resulted in unexpected
register values.

When writing temp[1-3]_auto_temp_max, an unsigned long variable was
auto-converted into an int without range check. Writing values larger than
MAXINT resulted in unexpected register values.

vrm is an u8, so the written value needs to be limited to [0, 255].

Cc: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[bwh: Backported to 3.2:
 - Driver is not using clamp_val(); keep using SENSORS_LIMIT() for consistency
 - Driver is not using kstrtoul(); make the minimum change to store_vrm_reg()
   so we can validate the value before assigning]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoext4: fix ext4_discard_allocated_blocks() if we can't allocate the pa struct
Theodore Ts'o [Thu, 31 Jul 2014 02:17:17 +0000 (22:17 -0400)]
ext4: fix ext4_discard_allocated_blocks() if we can't allocate the pa struct

commit 86f0afd463215fc3e58020493482faa4ac3a4d69 upstream.

If there is a failure while allocating the preallocation structure, a
number of blocks can end up getting marked in the in-memory buddy
bitmap, and then not getting released.  This can result in the
following corruption getting reported by the kernel:

EXT4-fs error (device sda3): ext4_mb_generate_buddy:758: group 1126,
12793 clusters in bitmap, 12729 in gd

In that case, we need to release the blocks using mb_free_blocks().

Tested: fs smoke test; also demonstrated that with injected errors,
the file system is no longer getting corrupted

Google-Bug-Id: 16657874

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoext4: cleanup in ext4_discard_allocated_blocks()
Zheng Liu [Mon, 28 May 2012 21:53:53 +0000 (17:53 -0400)]
ext4: cleanup in ext4_discard_allocated_blocks()

commit 400db9d30146dc062aaba97a6301b425eb6015bc upstream.

remove 'len' variable in ext4_discard_allocated_blocks() because it is
useless.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agomd/raid1,raid10: always abort recover on write error.
NeilBrown [Thu, 31 Jul 2014 00:16:29 +0000 (10:16 +1000)]
md/raid1,raid10: always abort recover on write error.

commit 2446dba03f9dabe0b477a126cbeb377854785b47 upstream.

Currently we don't abort recovery on a write error if the write error
to the recovering device was triggerd by normal IO (as opposed to
recovery IO).

This means that for one bitmap region, the recovery might write to the
recovering device for a few sectors, then not bother for subsequent
sectors (as it never writes to failed devices).  In this case
the bitmap bit will be cleared, but it really shouldn't.

The result is that if the recovering device fails and is then re-added
(after fixing whatever hardware problem triggerred the failure),
the second recovery won't redo the region it was in the middle of,
so some of the device will not be recovered properly.

If we abort the recovery, the region being processes will be cancelled
(bit not cleared) and the whole region will be retried.

As the bug can result in data corruption the patch is suitable for
-stable.  For kernels prior to 3.11 there is a conflict in raid10.c
which will require care.

Original-from: jiao hui <jiaohui@bwstor.com.cn>
Reported-and-tested-by: jiao hui <jiaohui@bwstor.com.cn>
Signed-off-by: NeilBrown <neilb@suse.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agomm, thp: do not allow thp faults to avoid cpuset restrictions
David Rientjes [Wed, 30 Jul 2014 23:08:24 +0000 (16:08 -0700)]
mm, thp: do not allow thp faults to avoid cpuset restrictions

commit b104a35d32025ca740539db2808aa3385d0f30eb upstream.

The page allocator relies on __GFP_WAIT to determine if ALLOC_CPUSET
should be set in allocflags.  ALLOC_CPUSET controls if a page allocation
should be restricted only to the set of allowed cpuset mems.

Transparent hugepages clears __GFP_WAIT when defrag is disabled to prevent
the fault path from using memory compaction or direct reclaim.  Thus, it
is unfairly able to allocate outside of its cpuset mems restriction as a
side-effect.

This patch ensures that ALLOC_CPUSET is only cleared when the gfp mask is
truly GFP_ATOMIC by verifying it is also not a thp allocation.

Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Alex Thorlton <athorlton@sgi.com>
Tested-by: Alex Thorlton <athorlton@sgi.com>
Cc: Bob Liu <lliubbo@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hedi Berriche <hedi@sgi.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoMIPS: Prevent user from setting FCSR cause bits
Paul Burton [Tue, 22 Jul 2014 13:21:21 +0000 (14:21 +0100)]
MIPS: Prevent user from setting FCSR cause bits

commit b1442d39fac2fcfbe6a4814979020e993ca59c9e upstream.

If one or more matching FCSR cause & enable bits are set in saved thread
context then when that context is restored the kernel will take an FP
exception. This is of course undesirable and considered an oops, leading
to the kernel writing a backtrace to the console and potentially
rebooting depending upon the configuration. Thus the kernel avoids this
situation by clearing the cause bits of the FCSR register when handling
FP exceptions and after emulating FP instructions.

However the kernel does not prevent userland from setting arbitrary FCSR
cause & enable bits via ptrace, using either the PTRACE_POKEUSR or
PTRACE_SETFPREGS requests. This means userland can trivially cause the
kernel to oops on any system with an FPU. Prevent this from happening
by clearing the cause bits when writing to the saved FCSR context via
ptrace.

This problem appears to exist at least back to the beginning of the git
era in the PTRACE_POKEUSR case.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Paul Burton <paul.burton@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/7438/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoMIPS: tlbex: Fix a missing statement for HUGETLB
Huacai Chen [Tue, 29 Jul 2014 06:54:40 +0000 (14:54 +0800)]
MIPS: tlbex: Fix a missing statement for HUGETLB

commit 8393c524a25609a30129e4a8975cf3b91f6c16a5 upstream.

In commit 2c8c53e28f1 (MIPS: Optimize TLB handlers for Octeon CPUs)
build_r4000_tlb_refill_handler() is modified. But it doesn't compatible
with the original code in HUGETLB case. Because there is a copy & paste
error and one line of code is missing. It is very easy to produce a bug
with LTP's hugemmap05 test.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Binbin Zhou <zhoubb@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/7496/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agohwmon: (ads1015) Fix off-by-one for valid channel index checking
Axel Lin [Wed, 30 Jul 2014 03:13:52 +0000 (11:13 +0800)]
hwmon: (ads1015) Fix off-by-one for valid channel index checking

commit 56de1377ad92f72ee4e5cb0faf7a9b6048fdf0bf upstream.

Current code uses channel as array index, so the valid channel value is
0 .. ADS1015_CHANNELS - 1.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agotpm: Provide a generic means to override the chip returned timeouts
Jason Gunthorpe [Thu, 22 May 2014 00:26:44 +0000 (18:26 -0600)]
tpm: Provide a generic means to override the chip returned timeouts

commit 8e54caf407b98efa05409e1fee0e5381abd2b088 upstream.

Some Atmel TPMs provide completely wrong timeouts from their
TPM_CAP_PROP_TIS_TIMEOUT query. This patch detects that and returns
new correct values via a DID/VID table in the TIS driver.

Tested on ARM using an AT97SC3204T FW version 37.16

[PHuewe: without this fix these 'broken' Atmel TPMs won't function on
older kernels]
Signed-off-by: "Berg, Christopher" <Christopher.Berg@atmel.com>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
[bwh: Backported to 3.2:
 - Adjust filename, context
 - s/chip->ops->/chip->vendor./]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agonet: sendmsg: fix NULL pointer dereference
Andrey Ryabinin [Sat, 26 Jul 2014 17:26:58 +0000 (21:26 +0400)]
net: sendmsg: fix NULL pointer dereference

commit 40eea803c6b2cfaab092f053248cbeab3f368412 upstream.

Sasha's report:
> While fuzzing with trinity inside a KVM tools guest running the latest -next
> kernel with the KASAN patchset, I've stumbled on the following spew:
>
> [ 4448.949424] ==================================================================
> [ 4448.951737] AddressSanitizer: user-memory-access on address 0
> [ 4448.952988] Read of size 2 by thread T19638:
> [ 4448.954510] CPU: 28 PID: 19638 Comm: trinity-c76 Not tainted 3.16.0-rc4-next-20140711-sasha-00046-g07d3099-dirty #813
> [ 4448.956823]  ffff88046d86ca40 0000000000000000 ffff880082f37e78 ffff880082f37a40
> [ 4448.958233]  ffffffffb6e47068 ffff880082f37a68 ffff880082f37a58 ffffffffb242708d
> [ 4448.959552]  0000000000000000 ffff880082f37a88 ffffffffb24255b1 0000000000000000
> [ 4448.961266] Call Trace:
> [ 4448.963158] dump_stack (lib/dump_stack.c:52)
> [ 4448.964244] kasan_report_user_access (mm/kasan/report.c:184)
> [ 4448.965507] __asan_load2 (mm/kasan/kasan.c:352)
> [ 4448.966482] ? netlink_sendmsg (net/netlink/af_netlink.c:2339)
> [ 4448.967541] netlink_sendmsg (net/netlink/af_netlink.c:2339)
> [ 4448.968537] ? get_parent_ip (kernel/sched/core.c:2555)
> [ 4448.970103] sock_sendmsg (net/socket.c:654)
> [ 4448.971584] ? might_fault (mm/memory.c:3741)
> [ 4448.972526] ? might_fault (./arch/x86/include/asm/current.h:14 mm/memory.c:3740)
> [ 4448.973596] ? verify_iovec (net/core/iovec.c:64)
> [ 4448.974522] ___sys_sendmsg (net/socket.c:2096)
> [ 4448.975797] ? put_lock_stats.isra.13 (./arch/x86/include/asm/preempt.h:98 kernel/locking/lockdep.c:254)
> [ 4448.977030] ? lock_release_holdtime (kernel/locking/lockdep.c:273)
> [ 4448.978197] ? lock_release_non_nested (kernel/locking/lockdep.c:3434 (discriminator 1))
> [ 4448.979346] ? check_chain_key (kernel/locking/lockdep.c:2188)
> [ 4448.980535] __sys_sendmmsg (net/socket.c:2181)
> [ 4448.981592] ? trace_hardirqs_on_caller (kernel/locking/lockdep.c:2600)
> [ 4448.982773] ? trace_hardirqs_on (kernel/locking/lockdep.c:2607)
> [ 4448.984458] ? syscall_trace_enter (arch/x86/kernel/ptrace.c:1500 (discriminator 2))
> [ 4448.985621] ? trace_hardirqs_on_caller (kernel/locking/lockdep.c:2600)
> [ 4448.986754] SyS_sendmmsg (net/socket.c:2201)
> [ 4448.987708] tracesys (arch/x86/kernel/entry_64.S:542)
> [ 4448.988929] ==================================================================

This reports means that we've come to netlink_sendmsg() with msg->msg_name == NULL and msg->msg_namelen > 0.

After this report there was no usual "Unable to handle kernel NULL pointer dereference"
and this gave me a clue that address 0 is mapped and contains valid socket address structure in it.

This bug was introduced in f3d3342602f8bcbf37d7c46641cb9bca7618eb1c
(net: rework recvmsg handler msg_name and msg_namelen logic).
Commit message states that:
"Set msg->msg_name = NULL if user specified a NULL in msg_name but had a
 non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't
 affect sendto as it would bail out earlier while trying to copy-in the
 address."
But in fact this affects sendto when address 0 is mapped and contains
socket address structure in it. In such case copy-in address will succeed,
verify_iovec() function will successfully exit with msg->msg_namelen > 0
and msg->msg_name == NULL.

This patch fixes it by setting msg_namelen to 0 if msg_name == NULL.

Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Eric Dumazet <edumazet@google.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoiommu/vt-d: Exclude devices using RMRRs from IOMMU API domains
Alex Williamson [Thu, 3 Jul 2014 15:57:02 +0000 (09:57 -0600)]
iommu/vt-d: Exclude devices using RMRRs from IOMMU API domains

commit c875d2c1b8083cd627ea0463e20bf22c2d7421ee upstream.

The user of the IOMMU API domain expects to have full control of
the IOVA space for the domain.  RMRRs are fundamentally incompatible
with that idea.  We can neither map the RMRR into the IOMMU API
domain, nor can we guarantee that the device won't continue DMA with
the area described by the RMRR as part of the new domain.  Therefore
we must prevent such devices from being used by the IOMMU API.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[bwh: Backported to 3.2: driver only operates on PCI devices]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoFix gcc-4.9.0 miscompilation of load_balance() in scheduler
Linus Torvalds [Sat, 26 Jul 2014 21:52:01 +0000 (14:52 -0700)]
Fix gcc-4.9.0 miscompilation of load_balance() in scheduler

commit 2062afb4f804afef61cbe62a30cac9a46e58e067 upstream.

Michel Dänzer and a couple of other people reported inexplicable random
oopses in the scheduler, and the cause turns out to be gcc mis-compiling
the load_balance() function when debugging is enabled.  The gcc bug
apparently goes back to gcc-4.5, but slight optimization changes means
that it now showed up as a problem in 4.9.0 and 4.9.1.

The instruction scheduling problem causes gcc to schedule a spill
operation to before the stack frame has been created, which in turn can
corrupt the spilled value if an interrupt comes in.  There may be other
effects of this bug too, but that's the code generation problem seen in
Michel's case.

This is fixed in current gcc HEAD, but the workaround as suggested by
Markus Trippelsdorf is pretty simple: use -fno-var-tracking-assignments
when compiling the kernel, which disables the gcc code that causes the
problem.  This can result in slightly worse debug information for
variable accesses, but that is infinitely preferable to actual code
generation problems.

Doing this unconditionally (not just for CONFIG_DEBUG_INFO) also allows
non-debug builds to verify that the debug build would be identical: we
can do

    export GCC_COMPARE_DEBUG=1

to make gcc internally verify that the result of the build is
independent of the "-g" flag (it will make the compiler build everything
twice, toggling the debug flag, and compare the results).

Without the "-fno-var-tracking-assignments" option, the build would fail
(even with 4.8.3 that didn't show the actual stack frame bug) with a gcc
compare failure.

See also gcc bugzilla:

  https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61801

Reported-by: Michel Dänzer <michel@daenzer.net>
Suggested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoDrivers: scsi: storvsc: Implement a eh_timed_out handler
K. Y. Srinivasan [Sat, 12 Jul 2014 16:48:30 +0000 (09:48 -0700)]
Drivers: scsi: storvsc: Implement a eh_timed_out handler

commit 56b26e69c8283121febedd12b3cc193384af46b9 upstream.

On Azure, we have seen instances of unbounded I/O latencies. To deal with
this issue, implement handler that can reset the timeout. Note that the
host gaurantees that it will respond to each command that has been issued.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
[hch: added a better comment explaining the issue]
Signed-off-by: Christoph Hellwig <hch@lst.de>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agohpsa: fix bad -ENOMEM return value in hpsa_big_passthru_ioctl
Stephen M. Cameron [Thu, 3 Jul 2014 15:18:03 +0000 (10:18 -0500)]
hpsa: fix bad -ENOMEM return value in hpsa_big_passthru_ioctl

commit 0758f4f732b08b6ef07f2e5f735655cf69fea477 upstream.

When copy_from_user fails, return -EFAULT, not -ENOMEM

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Reported-by: Robert Elliott <elliott@hp.com>
Reviewed-by: Joe Handzik <joseph.t.handzik@hp.com>
Reviewed-by: Scott Teel <scott.teel@hp.com>
Reviewed by: Mike MIller <michael.miller@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agobfa: Fix undefined bit shift on big-endian architectures with 32-bit DMA address
Ben Hutchings [Sun, 8 Jun 2014 22:33:25 +0000 (23:33 +0100)]
bfa: Fix undefined bit shift on big-endian architectures with 32-bit DMA address

commit 03a6c3ff3282ee9fa893089304d951e0be93a144 upstream.

bfa_swap_words() shifts its argument (assumed to be 64-bit) by 32 bits
each way.  In two places the argument type is dma_addr_t, which may be
32-bit, in which case the effect of the bit shift is undefined:

drivers/scsi/bfa/bfa_fcpim.c: In function 'bfa_ioim_send_ioreq':
drivers/scsi/bfa/bfa_fcpim.c:2497:4: warning: left shift count >= width of type [enabled by default]
    addr = bfa_sgaddr_le(sg_dma_address(sg));
    ^
drivers/scsi/bfa/bfa_fcpim.c:2497:4: warning: right shift count >= width of type [enabled by default]
drivers/scsi/bfa/bfa_fcpim.c:2509:4: warning: left shift count >= width of type [enabled by default]
    addr = bfa_sgaddr_le(sg_dma_address(sg));
    ^
drivers/scsi/bfa/bfa_fcpim.c:2509:4: warning: right shift count >= width of type [enabled by default]

Avoid this by adding casts to u64 in bfa_swap_words().

Compile-tested only.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Fixes: f16a17507b09 ('[SCSI] bfa: remove all OS wrappers')
Signed-off-by: Christoph Hellwig <hch@lst.de>
8 years agostaging: vt6655: Fix disassociated messages every 10 seconds
Malcolm Priestley [Wed, 23 Jul 2014 20:35:12 +0000 (21:35 +0100)]
staging: vt6655: Fix disassociated messages every 10 seconds

commit 4aa0abed3a2a11b7d71ad560c1a3e7631c5a31cd upstream.

byReAssocCount is incremented every second resulting in
disassociated message being send every 10 seconds whether
connection or not.

byReAssocCount should only advance while eCommandState
is in WLAN_ASSOCIATE_WAIT

Change existing scope to if condition.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agostaging: vt6655: Fix Warning on boot handle_irq_event_percpu.
Malcolm Priestley [Wed, 23 Jul 2014 20:35:11 +0000 (21:35 +0100)]
staging: vt6655: Fix Warning on boot handle_irq_event_percpu.

commit 6cff1f6ad4c615319c1a146b2aa0af1043c5e9f5 upstream.

WARNING: CPU: 0 PID: 929 at /home/apw/COD/linux/kernel/irq/handle.c:147 handle_irq_event_percpu+0x1d1/0x1e0()
irq 17 handler device_intr+0x0/0xa80 [vt6655_stage] enabled interrupts

Using spin_lock_irqsave appears to fix this.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agohwmon: (smsc47m192) Fix temperature limit and vrm write operations
Guenter Roeck [Fri, 18 Jul 2014 14:31:18 +0000 (07:31 -0700)]
hwmon: (smsc47m192) Fix temperature limit and vrm write operations

commit 043572d5444116b9d9ad8ae763cf069e7accbc30 upstream.

Temperature limit clamps are applied after converting the temperature
from milli-degrees C to degrees C, so either the clamp limit needs
to be specified in degrees C, not milli-degrees C, or clamping must
happen before converting to degrees C. Use the latter method to avoid
overflows.

vrm is an u8, so the written value needs to be limited to [0, 255].

Cc: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
[bwh: Backported to 3.2:
 - Driver is not using clamp_val(); keep using SENSORS_LIMIT() for consistency
 - Driver is not using kstrtoul(); make the minimum change to set_vrm() so
   we can validate the value before assigning]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agodrm/radeon: fix irq ring buffer overflow handling
Christian König [Wed, 23 Jul 2014 07:47:58 +0000 (09:47 +0200)]
drm/radeon: fix irq ring buffer overflow handling

commit e8c214d22e76dd0ead38f97f8d2dc09aac70d651 upstream.

We must mask out the overflow bit as well, otherwise
the wptr will never match the rptr again and the interrupt
handler will loop forever.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
[bwh: Backported to 3.2: drop changes for unsupported GPUs]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: Fix persist resume of some SS USB devices
Pratyush Anand [Fri, 18 Jul 2014 07:07:10 +0000 (12:37 +0530)]
USB: Fix persist resume of some SS USB devices

commit a40178b2fa6ad87670fb1e5fa4024db00c149629 upstream.

Problem Summary: Problem has been observed generally with PM states
where VBUS goes off during suspend. There are some SS USB devices which
take longer time for link training compared to many others.  Such
devices fail to reconnect with same old address which was associated
with it before suspend.

When system resumes, at some point of time (dpm_run_callback->
usb_dev_resume->usb_resume->usb_resume_both->usb_resume_device->
usb_port_resume) SW reads hub status. If device is present,
then it finishes port resume and re-enumerates device with same
address. If device is not present then, SW thinks that device was
removed during suspend and therefore does logical disconnection
and removes all the resource allocated for this device.

Now, if I put sufficient delay just before root hub status read in
usb_resume_device then, SW sees always that device is present. In normal
course(without any delay) SW sees that no device is present and then SW
removes all resource associated with the device at this port.  In the
latter case, after sometime, device says that hey I am here, now host
enumerates it, but with new address.

Problem had been reproduced when I connect verbatim USB3.0 hard disc
with my STiH407 XHCI host running with 3.10 kernel.

I see that similar problem has been reported here.
https://bugzilla.kernel.org/show_bug.cgi?id=53211
Reading above it seems that bug was not in 3.6.6 and was present in 3.8
and again it was not present for some in 3.12.6, while it was present
for few others. I tested with 3.13-FC19 running at i686 desktop, problem
was still there. However, I was failed to reproduce it with 3.16-RC4
running at same i686 machine. I would say it is just a random
observation. Problem for few devices is always there, as I am unable to
find a proper fix for the issue.

So, now question is what should be the amount of delay so that host is
always able to recognize suspended device after resume.

XHCI specs 4.19.4 says that when Link training is successful, port sets
CSC bit to 1. So if SW reads port status before successful link
training, then it will not find device to be present.  USB Analyzer log
with such buggy devices show that in some cases device switch on the
RX termination after long delay of host enabling the VBUS. In few other
cases it has been seen that device fails to negotiate link training in
first attempt. It has been reported till now that few devices take as
long as 2000 ms to train the link after host enabling its VBUS and
RX termination. This patch implements a 2000 ms timeout for CSC bit to set
ie for link training. If in a case link trains before timeout, loop will
exit earlier.

This patch implements above delay, but only for SS device and when
persist is enabled.

So, for the good device overhead is almost none. While for the bad
devices penalty could be the time which it take for link training.
But, If a device was connected before suspend, and was removed
while system was asleep, then the penalty would be the timeout ie
2000 ms.

Results:

Verbatim USB SS hard disk connected with STiH407 USB host running 3.10
Kernel resumes in 461 msecs without this patch, but hard disk is
assigned a new device address. Same system resumes in 790 msecs with
this patch, but with old device address.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agousbcore: don't log on consecutive debounce failures of the same port
Oliver Neukum [Mon, 14 Jul 2014 13:39:49 +0000 (15:39 +0200)]
usbcore: don't log on consecutive debounce failures of the same port

commit 5ee0f803cc3a0738a63288e4a2f453c85889fbda upstream.

Some laptops have an internal port for a BT device which picks
up noise when the kill switch is used, but not enough to trigger
printk_rlimit(). So we shouldn't log consecutive faults of this kind.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2:
 - Adjust context
 - Error message already includes the port number]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode)
Romain Degez [Fri, 11 Jul 2014 16:08:13 +0000 (18:08 +0200)]
ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode)

commit b32bfc06aefab61acc872dec3222624e6cd867ed upstream.

Add support of the Promise FastTrak TX8660 SATA HBA in ahci mode by
registering the board in the ahci_pci_tbl[].

Note: this HBA also provide a hardware RAID mode when activated in
BIOS but specific drivers from the manufacturer are required in this
case.

Signed-off-by: Romain Degez <romain.degez@gmail.com>
Tested-by: Romain Degez <romain.degez@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: OHCI: don't lose track of EDs when a controller dies
Alan Stern [Thu, 17 Jul 2014 20:34:29 +0000 (16:34 -0400)]
USB: OHCI: don't lose track of EDs when a controller dies

commit 977dcfdc60311e7aa571cabf6f39c36dde13339e upstream.

This patch fixes a bug in ohci-hcd.  When an URB is unlinked, the
corresponding Endpoint Descriptor is added to the ed_rm_list and taken
off the hardware schedule.  Once the ED is no longer visible to the
hardware, finish_unlinks() handles the URBs that were unlinked or have
completed.  If any URBs remain attached to the ED, the ED is added
back to the hardware schedule -- but only if the controller is
running.

This fails when a controller dies.  A non-empty ED does not get added
back to the hardware schedule and does not remain on the ed_rm_list;
ohci-hcd loses track of it.  The remaining URBs cannot be unlinked,
which causes the USB stack to hang.

The patch changes finish_unlinks() so that non-empty EDs remain on
the ed_rm_list if the controller isn't running.  This requires moving
some of the existing code around, to avoid modifying the ED's hardware
fields more than once.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: keep using HC_IS_RUNNING()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoscsi: handle flush errors properly
James Bottomley [Thu, 3 Jul 2014 17:17:34 +0000 (19:17 +0200)]
scsi: handle flush errors properly

commit 89fb4cd1f717a871ef79fa7debbe840e3225cd54 upstream.

Flush commands don't transfer data and thus need to be special cased
in the I/O completion handler so that we can propagate errors to
the block layer and filesystem.

Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Reported-by: Steven Haber <steven@qumulo.com>
Tested-by: Steven Haber <steven@qumulo.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoBluetooth: never linger on process exit
Vladimir Davydov [Tue, 15 Jul 2014 08:25:28 +0000 (12:25 +0400)]
Bluetooth: never linger on process exit

commit 093facf3634da1b0c2cc7ed106f1983da901bbab upstream.

If the current process is exiting, lingering on socket close will make
it unkillable, so we should avoid it.

Reproducer:

  #include <sys/types.h>
  #include <sys/socket.h>

  #define BTPROTO_L2CAP   0
  #define BTPROTO_SCO     2
  #define BTPROTO_RFCOMM  3

  int main()
  {
          int fd;
          struct linger ling;

          fd = socket(PF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM);
          //or: fd = socket(PF_BLUETOOTH, SOCK_DGRAM, BTPROTO_L2CAP);
          //or: fd = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BTPROTO_SCO);

          ling.l_onoff = 1;
          ling.l_linger = 1000000000;
          setsockopt(fd, SOL_SOCKET, SO_LINGER, &ling, sizeof(ling));

          return 0;
  }

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agox86: don't exclude low BIOS area when allocating address space for non-PCI cards
Christoph Schulz [Wed, 16 Jul 2014 08:00:57 +0000 (10:00 +0200)]
x86: don't exclude low BIOS area when allocating address space for non-PCI cards

commit cbace46a9710a480cae51e4611697df5de41713e upstream.

Commit 30919b0bf356 ("x86: avoid low BIOS area when allocating address
space") moved the test for resource allocations that fall within the first
1MB of address space from the PCI-specific path to a generic path, such
that all resource allocations will avoid this area.  However, this breaks
ISA cards which need to allocate a memory region within the first 1MB.  An
example is the i82365 PCMCIA controller and derivatives like the Ricoh
RF5C296/396 which map part of the PCMCIA socket memory address space into
the first 1MB of system memory address space.  They do not work anymore as
no usable memory region exists due to this change:

  Intel ISA PCIC probe: Ricoh RF5C296/396 ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
  host opts [0]: none
  host opts [1]: none
  ISA irqs (scanned) = 3,4,5,9,10 status change on irq 10
  pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
  pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
  pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
  pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3e7 0x3f0-0x3ff
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0affff: excluding 0xa0000-0xaffff
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0b0000-0x0bffff: excluding 0xb0000-0xbffff
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d0000-0x0dffff: clean.
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0e0000-0x0effff: clean.
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
  pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
  pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
  pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
  pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3e7 0x3f0-0x3ff
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0a0000-0x0affff: excluding 0xa0000-0xaffff
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0b0000-0x0bffff: excluding 0xb0000-0xbffff
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d0000-0x0dffff: clean.
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0e0000-0x0effff: clean.
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean.
  pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0cc000-0x0effff: excluding 0xe0000-0xeffff
  pcmcia_socket pcmcia_socket1: cs: unable to map card memory!

If filtering out the first 1MB is reverted, everything works as expected.

Tested-by: Robert Resch <fli4l@robert.reschpara.de>
Signed-off-by: Christoph Schulz <develop@kristov.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agomtd/ftl: fix the double free of the buffers allocated in build_maps()
Kevin Hao [Thu, 3 Jul 2014 02:35:26 +0000 (10:35 +0800)]
mtd/ftl: fix the double free of the buffers allocated in build_maps()

commit a152056c912db82860a8b4c23d0bd3a5aa89e363 upstream.

I got the following panic on my fsl p5020ds board.

  Unable to handle kernel paging request for data at address 0x7375627379737465
  Faulting instruction address: 0xc000000000100778
  Oops: Kernel access of bad area, sig: 11 [#1]
  SMP NR_CPUS=24 CoreNet Generic
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-next-20140613 #145
  task: c0000000fe080000 ti: c0000000fe088000 task.ti: c0000000fe088000
  NIP: c000000000100778 LR: c00000000010073c CTR: 0000000000000000
  REGS: c0000000fe08aa00 TRAP: 0300   Not tainted  (3.15.0-next-20140613)
  MSR: 0000000080029000 <CE,EE,ME>  CR: 24ad2e24  XER: 00000000
  DEAR: 7375627379737465 ESR: 0000000000000000 SOFTE: 1
  GPR00: c0000000000c99b0 c0000000fe08ac80 c0000000009598e0 c0000000fe001d80
  GPR04: 00000000000000d0 0000000000000913 c000000007902b20 0000000000000000
  GPR08: c0000000feaae888 0000000000000000 0000000007091000 0000000000200200
  GPR12: 0000000028ad2e28 c00000000fff4000 c0000000007abe08 0000000000000000
  GPR16: c0000000007ab160 c0000000007aaf98 c00000000060ba68 c0000000007abda8
  GPR20: c0000000007abde8 c0000000feaea6f8 c0000000feaea708 c0000000007abd10
  GPR24: c000000000989370 c0000000008c6228 00000000000041ed c0000000fe00a400
  GPR28: c00000000017c1cc 00000000000000d0 7375627379737465 c0000000fe001d80
  NIP [c000000000100778] .__kmalloc_track_caller+0x70/0x168
  LR [c00000000010073c] .__kmalloc_track_caller+0x34/0x168
  Call Trace:
  [c0000000fe08ac80] [c00000000087e6b8] uevent_sock_list+0x0/0x10 (unreliable)
  [c0000000fe08ad20] [c0000000000c99b0] .kstrdup+0x44/0x90
  [c0000000fe08adc0] [c00000000017c1cc] .__kernfs_new_node+0x4c/0x130
  [c0000000fe08ae70] [c00000000017d7e4] .kernfs_new_node+0x2c/0x64
  [c0000000fe08aef0] [c00000000017db00] .kernfs_create_dir_ns+0x34/0xc8
  [c0000000fe08af80] [c00000000018067c] .sysfs_create_dir_ns+0x58/0xcc
  [c0000000fe08b010] [c0000000002c711c] .kobject_add_internal+0xc8/0x384
  [c0000000fe08b0b0] [c0000000002c7644] .kobject_add+0x64/0xc8
  [c0000000fe08b140] [c000000000355ebc] .device_add+0x11c/0x654
  [c0000000fe08b200] [c0000000002b5988] .add_disk+0x20c/0x4b4
  [c0000000fe08b2c0] [c0000000003a21d4] .add_mtd_blktrans_dev+0x340/0x514
  [c0000000fe08b350] [c0000000003a3410] .mtdblock_add_mtd+0x74/0xb4
  [c0000000fe08b3e0] [c0000000003a32cc] .blktrans_notify_add+0x64/0x94
  [c0000000fe08b470] [c00000000039b5b4] .add_mtd_device+0x1d4/0x368
  [c0000000fe08b520] [c00000000039b830] .mtd_device_parse_register+0xe8/0x104
  [c0000000fe08b5c0] [c0000000003b8408] .of_flash_probe+0x72c/0x734
  [c0000000fe08b750] [c00000000035ba40] .platform_drv_probe+0x38/0x84
  [c0000000fe08b7d0] [c0000000003599a4] .really_probe+0xa4/0x29c
  [c0000000fe08b870] [c000000000359d3c] .__driver_attach+0x100/0x104
  [c0000000fe08b900] [c00000000035746c] .bus_for_each_dev+0x84/0xe4
  [c0000000fe08b9a0] [c0000000003593c0] .driver_attach+0x24/0x38
  [c0000000fe08ba10] [c000000000358f24] .bus_add_driver+0x1c8/0x2ac
  [c0000000fe08bab0] [c00000000035a3a4] .driver_register+0x8c/0x158
  [c0000000fe08bb30] [c00000000035b9f4] .__platform_driver_register+0x6c/0x80
  [c0000000fe08bba0] [c00000000084e080] .of_flash_driver_init+0x1c/0x30
  [c0000000fe08bc10] [c000000000001864] .do_one_initcall+0xbc/0x238
  [c0000000fe08bd00] [c00000000082cdc0] .kernel_init_freeable+0x188/0x268
  [c0000000fe08bdb0] [c0000000000020a0] .kernel_init+0x1c/0xf7c
  [c0000000fe08be30] [c000000000000884] .ret_from_kernel_thread+0x58/0xd4
  Instruction dump:
  41bd0010 480000c8 4bf04eb5 60000000 e94d0028 e93f0000 7cc95214 e8a60008
  7fc9502a 2fbe0000 419e00c8 e93f0022 <7f7e482a39200000 88ed06b2 992d06b2
  ---[ end trace b4c9a94804a42d40 ]---

It seems that the corrupted partition header on my mtd device triggers
a bug in the ftl. In function build_maps() it will allocate the buffers
needed by the mtd partition, but if something goes wrong such as kmalloc
failure, mtd read error or invalid partition header parameter, it will
free all allocated buffers and then return non-zero. In my case, it
seems that partition header parameter 'NumTransferUnits' is invalid.

And the ftl_freepart() is a function which free all the partition
buffers allocated by build_maps(). Given the build_maps() is a self
cleaning function, so there is no need to invoke this function even
if build_maps() return with error. Otherwise it will causes the
buffers to be freed twice and then weird things would happen.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agogspca_pac7302: Add new usb-id for Genius i-Look 317
Hans de Goede [Wed, 9 Jul 2014 09:20:44 +0000 (06:20 -0300)]
gspca_pac7302: Add new usb-id for Genius i-Look 317

commit 242841d3d71191348f98310e2d2001e1001d8630 upstream.

Tested-and-reported-by: yullaw <yullaw@mageia.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agotda10071: force modulation to QPSK on DVB-S
Antti Palosaari [Fri, 4 Jul 2014 08:44:39 +0000 (05:44 -0300)]
tda10071: force modulation to QPSK on DVB-S

commit db4175ae2095634dbecd4c847da439f9c83e1b3b upstream.

Only supported modulation for DVB-S is QPSK. Modulation parameter
contains invalid value for DVB-S on some cases, which leads driver
refusing tuning attempt. Due to that, hard code modulation to QPSK
in case of DVB-S.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoserial: core: Preserve termios c_cflag for console resume
Peter Hurley [Wed, 9 Jul 2014 13:21:14 +0000 (09:21 -0400)]
serial: core: Preserve termios c_cflag for console resume

commit ae84db9661cafc63d179e1d985a2c5b841ff0ac4 upstream.

When a tty is opened for the serial console, the termios c_cflag
settings are inherited from the console line settings.
However, if the tty is subsequently closed, the termios settings
are lost. This results in a garbled console if the console is later
suspended and resumed.

Preserve the termios c_cflag for the serial console when the tty
is shutdown; this reflects the most recent line settings.

Fixes: Bugzilla #69751, 'serial console does not wake from S3'
Reported-by: Valerio Vanni <valerio.vanni@inwind.it>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: tty_struct::termios is a pointer]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>