USB: serial: pl2303: new device id for Chilitag
[pandora-kernel.git] / drivers / usb / core /
2018-03-03 Dmitry Fleytman... usb: Add device quirk for Logitech HD Pro Webcam C925e
2018-03-03 Oliver Neukumusb: add RESET_RESUME for ELSA MicroLink 56K
2018-03-03 Masakazu MokunoUSB: core: Add type-specific length check of BOS descri...
2018-03-03 Oliver NeukumUSB: usbfs: Filter flags passed in from user space
2018-02-13 Alan SternUSB: usbfs: compute urb->actual_length for isochronous
2018-02-13 Bernhard RosenkraenzerUSB: Add delay-init quirk for Corsair K70 LUX keyboards
2018-01-01 Alan SternUSB: core: prevent malicious bNumInterfaces overflow
2018-01-01 Felipe Balbiusb: quirks: add quirk for WORLDE MINI MIDI keyboard
2018-01-01 Dmitry Fleytmanusb: Increase quirk delay for USB devices
2017-11-26 Dmitry Fleytmanusb: Add device quirk for Logitech HD Pro Webcam C920-C
2017-11-26 Kai-Heng Fengusb: quirks: add delay init quirk for Corsair Strafe...
2017-11-26 Douglas AndersonUSB: core: Avoid race of async_completed() w/ usbdev_re...
2017-11-11 Alan SternUSB: core: fix out-of-bounds access bug in usb_get_bos_...
2017-11-11 Greg Kroah-HartmanUSB: fix out-of-bounds in usb_set_configuration
2017-11-11 Rafael J. WysockiUSB: hcd: Mark secondary HCD as dead if the primary...
2017-10-12 Devin HeitmuellerAdd USB quirk for HVR-950q to avoid intermittent device...
2017-09-15 Johan HovoldUSB: hub: fix SS max number of ports
2017-09-15 Johan HovoldUSB: hub: fix non-SS hub-descriptor handling
2017-09-15 Johan HovoldUSB: hub: fix SS hub-descriptor handling
2017-09-15 Vamsi Krishna Sama... USB: core: replace %p with %pK
2017-08-26 Ajay KaherUSB: Proper handling of Race Condition when two USB...
2017-08-26 Guenter Roeckusb: hub: Do not attempt to autosuspend disconnected...
2017-08-26 Guenter Roeckusb: hub: Fix error loop seen after hub communication...
2017-07-18 Samuel Thibaultusb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk
2017-03-16 Lukáš LalinskýUSB: Add quirk for WORLDE easykey.25 MIDI keyboard
2017-03-16 Alan SternUSB: fix problems with duplicate endpoint addresses
2016-11-20 Alan SternUSB: change bInterval default to 10 ms
2016-11-20 Alan SternUSB: avoid left shift by -1
2016-11-20 Alan SternUSB: fix typo in wMaxPacketSize validation
2016-11-20 Alan SternUSB: validate wMaxPacketValue entries in endpoint descr...
2016-08-22 Kangjie LuUSB: usbfs: fix potential infoleak in devio
2016-06-15 Robert Dobrowolskiusb: hcd: out of bounds access in for_each_companion
2016-04-30 Oliver NeukumUSB: usb_driver_claim_interface: add sanity checking
2016-04-30 Oliver Neukumusb: hub: fix a typo in hub_port_init() leading to...
2016-04-30 Oliver Neukumusb: retry reset if a device times out
2016-01-22 Alan SternUSB: fix invalid memory access in hub_activate()
2015-12-30 Ben Hutchingsusb: Use the USB_SS_MULT() macro to decode burst multip...
2015-11-17 Vincent Palatinusb: Add device quirk for Logitech PTZ cameras
2015-11-17 Yao-Wen MaoUSB: Add reset-resume quirk for two Plantronics usb...
2015-10-13 Mathias Nymanusb: Use the USB_SS_MULT() macro to get the burst multi...
2015-08-12 Robert Schlabbachusb: core: Fix USB 3.0 devices lost in NOTATTACHED...
2015-05-09 Alan SternUSB: usbfs: don't leak kernel data in siginfo
2015-05-09 Alan SternUSB: fix use-after-free bug in usb_hcd_unlink_urb()
2015-05-09 Alan SternUSB: add flag for HCDs that can't receive wakeup reques...
2015-05-09 Sebastian Andrzej... usb: core: buffer: smallest buffer should start at...
2015-02-20 Macpaul LinUSB: Add OTG PET device to TPL
2015-02-20 James P Michels IIIusb-core bInterval quirk
2015-01-01 Al Viromove d_rcu from overlapping d_child to overlapping...
2014-12-14 Hans de Goedeusb-quirks: Add reset-resume quirk for MS Wireless...
2014-12-14 Hans de Goedeusb: Do not allow usb_alloc_streams on unconfigured...
2014-12-14 Lu BaoluUSB: Add device quirk for ASUS T100 Base Station keyboard
2014-12-14 Joonyoung ShimUSB: add reset resume quirk for usb3503
2014-11-05 Joe Lawrenceusb: hub: take hub->hdev reference when processing...
2014-09-13 Pratyush AnandUSB: Fix persist resume of some SS USB devices
2014-09-13 Oliver Neukumusbcore: don't log on consecutive debounce failures...
2014-08-06 Gavin Guousb: Check if port status is equal to RxDetect
2014-07-11 Alan SternUSB: Avoid runtime suspend loops for HCDs that can...
2014-04-01 Julius Wernerusb: Make DELAY_INIT quirk wait 100ms between Get Confi...
2014-04-01 Julius Wernerusb: Add device quirk for Logitech HD Pro Webcams C920...
2014-01-03 Julius Wernerusb: hub: Use correct reset for wedged USB3 devices...
2014-01-03 Julius Wernerusb: hub: Clear Port Reset Change during init/resume
2014-01-03 Sarah Sharpusb: Disable USB 2.0 Link PM before device reset.
2013-11-28 Oliver NeukumUSB: quirks: add touchscreen that is dazzeled by remote...
2013-11-28 Oliver NeukumUSB: quirks.c: add one device that cannot deal with...
2013-10-26 Julius Wernerusb: core: don't try to reset_device() a port that...
2013-10-26 Kurt Garloffusb/core/devio.c: Don't reject control message to endpo...
2013-10-26 Hans de Goedeusb: config->desc.bLength may not exceed amount of...
2013-09-10 Oliver Neukumusb: add two quirky touchscreen
2013-08-02 William Gullandusb: Clear both buffers when clearing a control transfe...
2013-05-30 Oliver NeukumUSB: reset resume quirk needed by a hub
2013-05-13 Hans de Goedeusbfs: Always allow ctrl requests with USB_RECIP_ENDPOI...
2013-03-27 Hannes ReineckeUSB: xhci: correctly enable interrupts
2013-03-20 Sarah SharpUSB: Fix connected device switch to Inactive state.
2013-03-20 Sarah SharpUSB: Rip out recursive call on warm port reset.
2013-03-20 Sarah SharpUSB: Prepare for refactoring by adding extra udev checks.
2013-03-20 Sarah SharpUSB: Don't use EHCI port sempahore for USB 3.0 hubs.
2013-03-06 Laurent Pinchartusb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC...
2013-03-06 Laurent Pinchartusb: Add quirk detection based on interface information
2013-02-06 Andreas FleigUSB: Add device quirk for Microsoft VX700 webcam
2013-02-06 Oliver NeukumUSB: hub: handle claim of enabled remote wakeup after...
2013-02-06 Sarah SharpUSB: Handle warm reset failure on empty port.
2013-02-06 Sarah SharpUSB: Ignore port state until reset completes.
2013-02-06 Sarah SharpUSB: Increase reset timeout.
2013-02-06 Sarah SharpUSB: Allow USB 3.0 ports to be disabled.
2013-02-06 Sarah SharpUSB: Ignore xHCI Reset Device status.
2013-02-06 Sarah SharpUSB: Handle auto-transition from hot to warm reset.
2013-01-03 Alan SternUSB: fix endpoint-disabling for failed config changes
2012-10-30 Octavian Purdilausb hub: send clear_tt_buffer_complete events when...
2012-10-10 Alan SternUSB: Fix race condition when removing host controllers
2012-09-19 Alan SternUSB: add device quirk for Joss Optical touchboard
2012-08-09 Theodore Ts'ousb: feed USB device information to the /dev/random...
2012-08-02 Hans de Goedeusbdevfs: Correct amount of data copied to user in...
2012-07-25 Stanislaw Ledwonusb: Add support for root hub port status CAS
2012-06-19 Daniel MackUSB: fix gathering of interface associations
2012-06-19 Alan SternUSB: add NO_D3_DURING_SLEEP flag and revert 151b61284776be2
2012-05-30 Huajun LiUSB: Remove races in devio.c
2012-05-30 Andiry Xuusbcore: enable USB2 LPM if port suspend fails
2012-05-30 Steffen Müllerusb: add USB_QUIRK_RESET_RESUME for M-Audio 88es
2012-05-30 Johan HovoldUSB: move usb_translate_errors to linux/usb.h
2012-05-11 Alan SternUSB: EHCI: fix crash during suspend on ASUS computers
next