From: Linus Torvalds Date: Thu, 28 Oct 2010 01:53:26 +0000 (-0700) Subject: Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300 X-Git-Tag: v2.6.37-rc1~81 X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=commitdiff_plain;h=bdab225015fbbb45ccd8913f5d7c01b2bf67d8b2;hp=7c5814c7199851c5fe9395d08fc1ab3c8c1531ea Merge git://git./linux/kernel/git/dhowells/linux-2.6-mn10300 * git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: (44 commits) MN10300: Save frame pointer in thread_info struct rather than global var MN10300: Change "Matsushita" to "Panasonic". MN10300: Create a defconfig for the ASB2364 board MN10300: Update the ASB2303 defconfig MN10300: ASB2364: Add support for SMSC911X and SMC911X MN10300: ASB2364: Handle the IRQ multiplexer in the FPGA MN10300: Generic time support MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support MN10300: Map userspace atomic op regs as a vmalloc page MN10300: And Panasonic AM34 subarch and implement SMP MN10300: Delete idle_timestamp from irq_cpustat_t MN10300: Make various interrupt priority settings configurable MN10300: Optimise do_csum() MN10300: Implement atomic ops using atomic ops unit MN10300: Make the FPU operate in non-lazy mode under SMP MN10300: SMP TLB flushing MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control MN10300: Make the use of PIDR to mark TLB entries controllable MN10300: Rename __flush_tlb*() to local_flush_tlb*() MN10300: AM34 erratum requires MMUCTR read and write on exception entry ... --- diff --git a/Kbuild b/Kbuild index 431f7ca2404c..b00037ad7e03 100644 --- a/Kbuild +++ b/Kbuild @@ -53,7 +53,7 @@ targets += arch/$(SRCARCH)/kernel/asm-offsets.s # Default sed regexp - multiline due to syntax constraints define sed-y "/^->/{s:->#\(.*\):/* \1 */:; \ - s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 (\2) /* \3 */:; \ + s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \ s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \ s:->::; p;}" endef diff --git a/MAINTAINERS b/MAINTAINERS index debde0128cd0..1e6b6bdf6340 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4448,7 +4448,7 @@ L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/panasonic-laptop.c -PANASONIC MN10300/AM33 PORT +PANASONIC MN10300/AM33/AM34 PORT M: David Howells M: Koichi Yasutake L: linux-am33-list@redhat.com (moderated for non-subscribers) diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 7c2a2f7f8dc1..365766a3d536 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -9,8 +9,19 @@ config MN10300 def_bool y select HAVE_OPROFILE -config AM33 - def_bool y +config AM33_2 + def_bool n + +config AM33_3 + def_bool n + +config AM34_2 + def_bool n + select MN10300_HAS_ATOMIC_OPS_UNIT + select MN10300_HAS_CACHE_SNOOP + +config ERRATUM_NEED_TO_RELOAD_MMUCTR + def_bool y if AM33_3 || AM34_2 config MMU def_bool y @@ -37,7 +48,7 @@ config GENERIC_CALIBRATE_DELAY def_bool y config GENERIC_CMOS_UPDATE - def_bool y + def_bool n config GENERIC_FIND_NEXT_BIT def_bool y @@ -45,6 +56,27 @@ config GENERIC_FIND_NEXT_BIT config GENERIC_HWEIGHT def_bool y +config GENERIC_TIME + def_bool y + +config GENERIC_CLOCKEVENTS + def_bool y + +config GENERIC_CLOCKEVENTS_BUILD + def_bool y + depends on GENERIC_CLOCKEVENTS + +config GENERIC_CLOCKEVENTS_BROADCAST + bool + +config CEVT_MN10300 + def_bool y + depends on GENERIC_CLOCKEVENTS + +config CSRC_MN10300 + def_bool y + depends on GENERIC_TIME + config GENERIC_BUG def_bool y @@ -61,18 +93,14 @@ config GENERIC_HARDIRQS config HOTPLUG_CPU def_bool n -config HZ - int - default 1000 - -mainmenu "Matsushita MN10300/AM33 Kernel Configuration" +mainmenu "Panasonic MN10300/AM33 Kernel Configuration" source "init/Kconfig" source "kernel/Kconfig.freezer" -menu "Matsushita MN10300 system setup" +menu "Panasonic MN10300 system setup" choice prompt "Unit type" @@ -87,6 +115,10 @@ config MN10300_UNIT_ASB2303 config MN10300_UNIT_ASB2305 bool "ASB2305" +config MN10300_UNIT_ASB2364 + bool "ASB2364" + select SMSC911X_ARCH_HOOKS if SMSC911X + endchoice choice @@ -99,57 +131,51 @@ choice config MN10300_PROC_MN103E010 bool "MN103E010" depends on MN10300_UNIT_ASB2303 || MN10300_UNIT_ASB2305 + select AM33_2 + select MN10300_PROC_HAS_TTYSM0 + select MN10300_PROC_HAS_TTYSM1 + select MN10300_PROC_HAS_TTYSM2 + +config MN10300_PROC_MN2WS0050 + bool "MN2WS0050" + depends on MN10300_UNIT_ASB2364 + select AM34_2 select MN10300_PROC_HAS_TTYSM0 select MN10300_PROC_HAS_TTYSM1 select MN10300_PROC_HAS_TTYSM2 endchoice -choice - prompt "Processor core support" - default MN10300_CPU_AM33V2 +config MN10300_HAS_ATOMIC_OPS_UNIT + def_bool n help - This option specifies the processor core for which the kernel will be - compiled. It affects the instruction set used. - -config MN10300_CPU_AM33V2 - bool "AM33v2" - -endchoice + This should be enabled if the processor has an atomic ops unit + capable of doing LL/SC equivalent operations. config FPU bool "FPU present" default y - depends on MN10300_PROC_MN103E010 + depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050 -choice - prompt "CPU Caching mode" - default MN10300_CACHE_WBACK +config LAZY_SAVE_FPU + bool "Save FPU state lazily" + default y + depends on FPU && !SMP help - This option determines the caching mode for the kernel. - - Write-Back caching mode involves the all reads and writes causing - the affected cacheline to be read into the cache first before being - operated upon. Memory is not then updated by a write until the cache - is filled and a cacheline needs to be displaced from the cache to - make room. Only at that point is it written back. - - Write-Through caching only fetches cachelines from memory on a - read. Writes always get written directly to memory. If the affected - cacheline is also in cache, it will be updated too. - - The final option is to turn of caching entirely. + Enable this to be lazy in the saving of the FPU state to the owning + task's thread struct. This is useful if most tasks on the system + don't use the FPU as only those tasks that use it will pass it + between them, and the state needn't be saved for a task that isn't + using it. -config MN10300_CACHE_WBACK - bool "Write-Back" + This can't be so easily used on SMP as the process that owns the FPU + state on a CPU may be currently running on another CPU, so for the + moment, it is disabled. -config MN10300_CACHE_WTHRU - bool "Write-Through" +source "arch/mn10300/mm/Kconfig.cache" -config MN10300_CACHE_DISABLED - bool "Disabled" - -endchoice +config MN10300_TLB_USE_PIDR + def_bool y menu "Memory layout options" @@ -170,24 +196,55 @@ config KERNEL_TEXT_ADDRESS config KERNEL_ZIMAGE_BASE_ADDRESS hex "Base address of compressed vmlinux image" - default "0x90700000" + default "0x50700000" +config BOOT_STACK_OFFSET + hex + default "0xF00" if SMP + default "0xFF0" if !SMP + +config BOOT_STACK_SIZE + hex + depends on SMP + default "0x100" endmenu -config PREEMPT - bool "Preemptible Kernel" - help - This option reduces the latency of the kernel when reacting to - real-time or interactive events by allowing a low priority process to - be preempted even if it is in kernel mode executing a system call. - This allows applications to run more reliably even when the system is - under load. +config SMP + bool "Symmetric multi-processing support" + default y + depends on MN10300_PROC_MN2WS0038 || MN10300_PROC_MN2WS0050 + ---help--- + This enables support for systems with more than one CPU. If you have + a system with only one CPU, like most personal computers, say N. If + you have a system with more than one CPU, say Y. + + If you say N here, the kernel will run on single and multiprocessor + machines, but will use only one CPU of a multiprocessor machine. If + you say Y here, the kernel will run on many, but not all, + singleprocessor machines. On a singleprocessor machine, the kernel + will run faster if you say N here. - Say Y here if you are building a kernel for a desktop, embedded - or real-time system. Say N if you are unsure. + See also , + and the SMP-HOWTO available at + . + + If you don't know what to do here, say N. + +config NR_CPUS + int + depends on SMP + default "2" + +config USE_GENERIC_SMP_HELPERS + bool + depends on SMP + default y + +source "kernel/Kconfig.preempt" config MN10300_CURRENT_IN_E2 bool "Hold current task address in E2 register" + depends on !SMP default y help This option removes the E2/R2 register from the set available to gcc @@ -209,12 +266,15 @@ config MN10300_USING_JTAG suppresses the use of certain hardware debugging features, such as single-stepping, which are taken over completely by the JTAG unit. +source "kernel/Kconfig.hz" +source "kernel/time/Kconfig" + config MN10300_RTC bool "Using MN10300 RTC" - depends on MN10300_PROC_MN103E010 + depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050 + select GENERIC_CMOS_UPDATE default n help - This option enables support for the RTC, thus enabling time to be tracked, even when system is powered down. This is available on-chip on the MN103E010. @@ -306,14 +366,23 @@ config MN10300_TTYSM1 choice prompt "Select the timer to supply the clock for SIF1" - default MN10300_TTYSM0_TIMER9 + default MN10300_TTYSM1_TIMER12 \ + if !(AM33_2 || AM33_3) + default MN10300_TTYSM1_TIMER9 \ + if AM33_2 || AM33_3 depends on MN10300_TTYSM1 +config MN10300_TTYSM1_TIMER12 + bool "Use timer 12 (16-bit)" + depends on !(AM33_2 || AM33_3) + config MN10300_TTYSM1_TIMER9 bool "Use timer 9 (16-bit)" + depends on AM33_2 || AM33_3 config MN10300_TTYSM1_TIMER3 bool "Use timer 3 (8-bit)" + depends on AM33_2 || AM33_3 endchoice @@ -328,17 +397,107 @@ config MN10300_TTYSM2 choice prompt "Select the timer to supply the clock for SIF2" - default MN10300_TTYSM0_TIMER10 + default MN10300_TTYSM2_TIMER3 \ + if !(AM33_2 || AM33_3) + default MN10300_TTYSM2_TIMER10 \ + if AM33_2 || AM33_3 depends on MN10300_TTYSM2 +config MN10300_TTYSM2_TIMER9 + bool "Use timer 9 (16-bit)" + depends on !(AM33_2 || AM33_3) + +config MN10300_TTYSM2_TIMER1 + bool "Use timer 1 (8-bit)" + depends on !(AM33_2 || AM33_3) + +config MN10300_TTYSM2_TIMER3 + bool "Use timer 3 (8-bit)" + depends on !(AM33_2 || AM33_3) + config MN10300_TTYSM2_TIMER10 bool "Use timer 10 (16-bit)" + depends on AM33_2 || AM33_3 endchoice config MN10300_TTYSM2_CTS bool "Enable the use of the CTS line /dev/ttySM2" - depends on MN10300_TTYSM2 + depends on MN10300_TTYSM2 && AM33_2 + +endmenu + +menu "Interrupt request priority options" + +comment "[!] NOTE: A lower number/level indicates a higher priority (0 is highest, 6 is lowest)" + +comment "____Non-maskable interrupt levels____" +comment "The following must be set to a higher priority than local_irq_disable() and on-chip serial" + +config GDBSTUB_IRQ_LEVEL + int "GDBSTUB interrupt priority" + depends on GDBSTUB + range 0 1 if LINUX_CLI_LEVEL = 2 + range 0 2 if LINUX_CLI_LEVEL = 3 + range 0 3 if LINUX_CLI_LEVEL = 4 + range 0 4 if LINUX_CLI_LEVEL = 5 + range 0 5 if LINUX_CLI_LEVEL = 6 + default 0 + +comment "The following must be set to a higher priority than local_irq_disable()" + +config MN10300_SERIAL_IRQ_LEVEL + int "MN10300 on-chip serial interrupt priority" + depends on MN10300_TTYSM + range 1 1 if LINUX_CLI_LEVEL = 2 + range 1 2 if LINUX_CLI_LEVEL = 3 + range 1 3 if LINUX_CLI_LEVEL = 4 + range 1 4 if LINUX_CLI_LEVEL = 5 + range 1 5 if LINUX_CLI_LEVEL = 6 + default 1 + +comment "-" +comment "____Maskable interrupt levels____" + +config LINUX_CLI_LEVEL + int "The highest interrupt priority excluded by local_irq_disable() (2-6)" + range 2 6 + default 2 + help + local_irq_disable() doesn't actually disable maskable interrupts - + what it does is restrict the levels of interrupt which are permitted + (a lower level indicates a higher priority) by lowering the value in + EPSW.IM from 7. Any interrupt is permitted for which the level is + lower than EPSW.IM. + + Certain interrupts, such as GDBSTUB and virtual MN10300 on-chip + serial DMA interrupts are allowed to interrupt normal disabled + sections. + +comment "The following must be set to a equal to or lower priority than LINUX_CLI_LEVEL" + +config TIMER_IRQ_LEVEL + int "Kernel timer interrupt priority" + range LINUX_CLI_LEVEL 6 + default 4 + +config PCI_IRQ_LEVEL + int "PCI interrupt priority" + depends on PCI + range LINUX_CLI_LEVEL 6 + default 5 + +config ETHERNET_IRQ_LEVEL + int "Ethernet interrupt priority" + depends on SMC91X || SMC911X || SMSC911X + range LINUX_CLI_LEVEL 6 + default 6 + +config EXT_SERIAL_IRQ_LEVEL + int "External serial port interrupt priority" + depends on SERIAL_8250 + range LINUX_CLI_LEVEL 6 + default 6 endmenu diff --git a/arch/mn10300/Makefile b/arch/mn10300/Makefile index ac5c6bdb2f05..7120282bf0d8 100644 --- a/arch/mn10300/Makefile +++ b/arch/mn10300/Makefile @@ -36,6 +36,9 @@ endif ifeq ($(CONFIG_MN10300_PROC_MN103E010),y) PROCESSOR := mn103e010 endif +ifeq ($(CONFIG_MN10300_PROC_MN2WS0050),y) +PROCESSOR := mn2ws0050 +endif ifeq ($(CONFIG_MN10300_UNIT_ASB2303),y) UNIT := asb2303 @@ -43,6 +46,9 @@ endif ifeq ($(CONFIG_MN10300_UNIT_ASB2305),y) UNIT := asb2305 endif +ifeq ($(CONFIG_MN10300_UNIT_ASB2364),y) +UNIT := asb2364 +endif head-y := arch/mn10300/kernel/head.o arch/mn10300/kernel/init_task.o diff --git a/arch/mn10300/boot/compressed/head.S b/arch/mn10300/boot/compressed/head.S index 502e1eb56709..7b50345b9e84 100644 --- a/arch/mn10300/boot/compressed/head.S +++ b/arch/mn10300/boot/compressed/head.S @@ -14,10 +14,29 @@ #include #include +#include +#ifdef CONFIG_SMP +#include +#endif .globl startup_32 startup_32: - # first save off parameters from bootloader +#ifdef CONFIG_SMP + # + # Secondary CPUs jump directly to the kernel entry point + # + # Must save primary CPU's D0-D2 registers as they hold boot parameters + # + mov (CPUID), d3 + and CPUID_MASK,d3 + beq startup_primary + mov CONFIG_KERNEL_TEXT_ADDRESS,a0 + jmp (a0) + +startup_primary: +#endif /* CONFIG_SMP */ + + # first save parameters from bootloader mov param_save_area,a0 mov d0,(a0) mov d1,(4,a0) @@ -37,8 +56,15 @@ startup_32: mov (a0),d0 btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy lne - mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD,d0 # writethru dcache + +#ifdef CONFIG_MN10300_CACHE_ENABLED +#ifdef CONFIG_MN10300_CACHE_WBACK + mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0 +#else + mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0 +#endif /* WBACK */ movhu d0,(a0) # enable +#endif /* !ENABLED */ # clear the BSS area mov __bss_start,a0 @@ -54,6 +80,9 @@ bssclear_end: # decompress the kernel call decompress_kernel[],0 +#ifdef CONFIG_MN10300_CACHE_WBACK + call mn10300_dcache_flush_inv[],0 +#endif # disable caches again mov CHCTR,a0 @@ -69,10 +98,46 @@ bssclear_end: mov (4,a0),d1 mov (8,a0),d2 + # jump to the kernel proper entry point mov a3,sp mov CONFIG_KERNEL_TEXT_ADDRESS,a0 jmp (a0) + +############################################################################### +# +# Cache flush routines +# +############################################################################### +#ifdef CONFIG_MN10300_CACHE_WBACK +mn10300_dcache_flush_inv: + movhu (CHCTR),d0 + btst CHCTR_DCEN,d0 + beq mn10300_dcache_flush_inv_end + + mov L1_CACHE_NENTRIES,d1 + clr a1 + +mn10300_dcache_flush_inv_loop: + mov (DCACHE_PURGE_WAY0(0),a1),d0 # unconditional purge + mov (DCACHE_PURGE_WAY1(0),a1),d0 # unconditional purge + mov (DCACHE_PURGE_WAY2(0),a1),d0 # unconditional purge + mov (DCACHE_PURGE_WAY3(0),a1),d0 # unconditional purge + + add L1_CACHE_BYTES,a1 + add -1,d1 + bne mn10300_dcache_flush_inv_loop + +mn10300_dcache_flush_inv_end: + ret [],0 +#endif /* CONFIG_MN10300_CACHE_WBACK */ + + +############################################################################### +# +# Data areas +# +############################################################################### .data .align 4 param_save_area: diff --git a/arch/mn10300/configs/asb2303_defconfig b/arch/mn10300/configs/asb2303_defconfig index d80dfcb2c902..3f749b69ca71 100644 --- a/arch/mn10300/configs/asb2303_defconfig +++ b/arch/mn10300/configs/asb2303_defconfig @@ -12,6 +12,8 @@ CONFIG_SLAB=y CONFIG_PROFILING=y # CONFIG_BLOCK is not set CONFIG_PREEMPT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_MN10300_RTC=y CONFIG_MN10300_TTYSM_CONSOLE=y CONFIG_MN10300_TTYSM0=y diff --git a/arch/mn10300/configs/asb2364_defconfig b/arch/mn10300/configs/asb2364_defconfig new file mode 100644 index 000000000000..83ce2f27b12a --- /dev/null +++ b/arch/mn10300/configs/asb2364_defconfig @@ -0,0 +1,98 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y +CONFIG_CGROUP_NS=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_RELAY=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLAB=y +CONFIG_PROFILING=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLOCK is not set +CONFIG_MN10300_UNIT_ASB2364=y +CONFIG_PREEMPT=y +# CONFIG_MN10300_USING_JTAG is not set +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MN10300_TTYSM_CONSOLE=y +CONFIG_MN10300_TTYSM0=y +CONFIG_MN10300_TTYSM0_TIMER2=y +CONFIG_MN10300_TTYSM1=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +CONFIG_IPV6=y +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_CONNECTOR=y +CONFIG_MTD=y +CONFIG_MTD_DEBUG=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_CFI_I4=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP=y +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_SMSC911X=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_PROC_KCORE=y +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_JFFS2_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/mn10300/include/asm/atomic.h b/arch/mn10300/include/asm/atomic.h index f0cc1f84a72f..92d2f9298e38 100644 --- a/arch/mn10300/include/asm/atomic.h +++ b/arch/mn10300/include/asm/atomic.h @@ -1 +1,351 @@ +/* MN10300 Atomic counter operations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_ATOMIC_H +#define _ASM_ATOMIC_H + +#include + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_SMP +#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT +static inline +unsigned long __xchg(volatile unsigned long *m, unsigned long val) +{ + unsigned long status; + unsigned long oldval; + + asm volatile( + "1: mov %4,(_AAR,%3) \n" + " mov (_ADR,%3),%1 \n" + " mov %5,(_ADR,%3) \n" + " mov (_ADR,%3),%0 \n" /* flush */ + " mov (_ASR,%3),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=&r"(oldval), "=m"(*m) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(m), "r"(val) + : "memory", "cc"); + + return oldval; +} + +static inline unsigned long __cmpxchg(volatile unsigned long *m, + unsigned long old, unsigned long new) +{ + unsigned long status; + unsigned long oldval; + + asm volatile( + "1: mov %4,(_AAR,%3) \n" + " mov (_ADR,%3),%1 \n" + " cmp %5,%1 \n" + " bne 2f \n" + " mov %6,(_ADR,%3) \n" + "2: mov (_ADR,%3),%0 \n" /* flush */ + " mov (_ASR,%3),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=&r"(oldval), "=m"(*m) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(m), + "r"(old), "r"(new) + : "memory", "cc"); + + return oldval; +} +#else /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */ +#error "No SMP atomic operation support!" +#endif /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */ + +#else /* CONFIG_SMP */ + +/* + * Emulate xchg for non-SMP MN10300 + */ +struct __xchg_dummy { unsigned long a[100]; }; +#define __xg(x) ((struct __xchg_dummy *)(x)) + +static inline +unsigned long __xchg(volatile unsigned long *m, unsigned long val) +{ + unsigned long oldval; + unsigned long flags; + + flags = arch_local_cli_save(); + oldval = *m; + *m = val; + arch_local_irq_restore(flags); + return oldval; +} + +/* + * Emulate cmpxchg for non-SMP MN10300 + */ +static inline unsigned long __cmpxchg(volatile unsigned long *m, + unsigned long old, unsigned long new) +{ + unsigned long oldval; + unsigned long flags; + + flags = arch_local_cli_save(); + oldval = *m; + if (oldval == old) + *m = new; + arch_local_irq_restore(flags); + return oldval; +} + +#endif /* CONFIG_SMP */ + +#define xchg(ptr, v) \ + ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \ + (unsigned long)(v))) + +#define cmpxchg(ptr, o, n) \ + ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \ + (unsigned long)(o), \ + (unsigned long)(n))) + +#define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v))) +#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new))) + +#endif /* !__ASSEMBLY__ */ + +#ifndef CONFIG_SMP #include +#else + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + */ + +#define ATOMIC_INIT(i) { (i) } + +#ifdef __KERNEL__ + +/** + * atomic_read - read atomic variable + * @v: pointer of type atomic_t + * + * Atomically reads the value of @v. Note that the guaranteed + * useful range of an atomic_t is only 24 bits. + */ +#define atomic_read(v) ((v)->counter) + +/** + * atomic_set - set atomic variable + * @v: pointer of type atomic_t + * @i: required value + * + * Atomically sets the value of @v to @i. Note that the guaranteed + * useful range of an atomic_t is only 24 bits. + */ +#define atomic_set(v, i) (((v)->counter) = (i)) + +/** + * atomic_add_return - add integer to atomic variable + * @i: integer value to add + * @v: pointer of type atomic_t + * + * Atomically adds @i to @v and returns the result + * Note that the guaranteed useful range of an atomic_t is only 24 bits. + */ +static inline int atomic_add_return(int i, atomic_t *v) +{ + int retval; +#ifdef CONFIG_SMP + int status; + + asm volatile( + "1: mov %4,(_AAR,%3) \n" + " mov (_ADR,%3),%1 \n" + " add %5,%1 \n" + " mov %1,(_ADR,%3) \n" + " mov (_ADR,%3),%0 \n" /* flush */ + " mov (_ASR,%3),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=&r"(retval), "=m"(v->counter) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(&v->counter), "r"(i) + : "memory", "cc"); + +#else + unsigned long flags; + + flags = arch_local_cli_save(); + retval = v->counter; + retval += i; + v->counter = retval; + arch_local_irq_restore(flags); +#endif + return retval; +} + +/** + * atomic_sub_return - subtract integer from atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v and returns the result + * Note that the guaranteed useful range of an atomic_t is only 24 bits. + */ +static inline int atomic_sub_return(int i, atomic_t *v) +{ + int retval; +#ifdef CONFIG_SMP + int status; + + asm volatile( + "1: mov %4,(_AAR,%3) \n" + " mov (_ADR,%3),%1 \n" + " sub %5,%1 \n" + " mov %1,(_ADR,%3) \n" + " mov (_ADR,%3),%0 \n" /* flush */ + " mov (_ASR,%3),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=&r"(retval), "=m"(v->counter) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(&v->counter), "r"(i) + : "memory", "cc"); + +#else + unsigned long flags; + flags = arch_local_cli_save(); + retval = v->counter; + retval -= i; + v->counter = retval; + arch_local_irq_restore(flags); +#endif + return retval; +} + +static inline int atomic_add_negative(int i, atomic_t *v) +{ + return atomic_add_return(i, v) < 0; +} + +static inline void atomic_add(int i, atomic_t *v) +{ + atomic_add_return(i, v); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + atomic_sub_return(i, v); +} + +static inline void atomic_inc(atomic_t *v) +{ + atomic_add_return(1, v); +} + +static inline void atomic_dec(atomic_t *v) +{ + atomic_sub_return(1, v); +} + +#define atomic_dec_return(v) atomic_sub_return(1, (v)) +#define atomic_inc_return(v) atomic_add_return(1, (v)) + +#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) +#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) + +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +/** + * atomic_clear_mask - Atomically clear bits in memory + * @mask: Mask of the bits to be cleared + * @v: pointer to word in memory + * + * Atomically clears the bits set in mask from the memory word specified. + */ +static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) +{ +#ifdef CONFIG_SMP + int status; + + asm volatile( + "1: mov %3,(_AAR,%2) \n" + " mov (_ADR,%2),%0 \n" + " and %4,%0 \n" + " mov %0,(_ADR,%2) \n" + " mov (_ADR,%2),%0 \n" /* flush */ + " mov (_ASR,%2),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=m"(*addr) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(addr), "r"(~mask) + : "memory", "cc"); +#else + unsigned long flags; + + mask = ~mask; + flags = arch_local_cli_save(); + *addr &= mask; + arch_local_irq_restore(flags); +#endif +} + +/** + * atomic_set_mask - Atomically set bits in memory + * @mask: Mask of the bits to be set + * @v: pointer to word in memory + * + * Atomically sets the bits set in mask from the memory word specified. + */ +static inline void atomic_set_mask(unsigned long mask, unsigned long *addr) +{ +#ifdef CONFIG_SMP + int status; + + asm volatile( + "1: mov %3,(_AAR,%2) \n" + " mov (_ADR,%2),%0 \n" + " or %4,%0 \n" + " mov %0,(_ADR,%2) \n" + " mov (_ADR,%2),%0 \n" /* flush */ + " mov (_ASR,%2),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=m"(*addr) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(addr), "r"(mask) + : "memory", "cc"); +#else + unsigned long flags; + + flags = arch_local_cli_save(); + *addr |= mask; + arch_local_irq_restore(flags); +#endif +} + +/* Atomic operations are already serializing on MN10300??? */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include + +#endif /* __KERNEL__ */ +#endif /* CONFIG_SMP */ +#endif /* _ASM_ATOMIC_H */ diff --git a/arch/mn10300/include/asm/bitops.h b/arch/mn10300/include/asm/bitops.h index 3f50e9661076..3b8a868188f5 100644 --- a/arch/mn10300/include/asm/bitops.h +++ b/arch/mn10300/include/asm/bitops.h @@ -57,7 +57,7 @@ #define clear_bit(nr, addr) ___clear_bit((nr), (addr)) -static inline void __clear_bit(int nr, volatile void *addr) +static inline void __clear_bit(unsigned long nr, volatile void *addr) { unsigned int *a = (unsigned int *) addr; int mask; @@ -70,15 +70,15 @@ static inline void __clear_bit(int nr, volatile void *addr) /* * test bit */ -static inline int test_bit(int nr, const volatile void *addr) +static inline int test_bit(unsigned long nr, const volatile void *addr) { - return 1UL & (((const unsigned int *) addr)[nr >> 5] >> (nr & 31)); + return 1UL & (((const volatile unsigned int *) addr)[nr >> 5] >> (nr & 31)); } /* * change bit */ -static inline void __change_bit(int nr, volatile void *addr) +static inline void __change_bit(unsigned long nr, volatile void *addr) { int mask; unsigned int *a = (unsigned int *) addr; @@ -88,7 +88,7 @@ static inline void __change_bit(int nr, volatile void *addr) *a ^= mask; } -extern void change_bit(int nr, volatile void *addr); +extern void change_bit(unsigned long nr, volatile void *addr); /* * test and set bit @@ -135,7 +135,7 @@ extern void change_bit(int nr, volatile void *addr); /* * test and change bit */ -static inline int __test_and_change_bit(int nr, volatile void *addr) +static inline int __test_and_change_bit(unsigned long nr, volatile void *addr) { int mask, retval; unsigned int *a = (unsigned int *)addr; @@ -148,7 +148,7 @@ static inline int __test_and_change_bit(int nr, volatile void *addr) return retval; } -extern int test_and_change_bit(int nr, volatile void *addr); +extern int test_and_change_bit(unsigned long nr, volatile void *addr); #include diff --git a/arch/mn10300/include/asm/cache.h b/arch/mn10300/include/asm/cache.h index 781bf613366d..f29cde2cfc91 100644 --- a/arch/mn10300/include/asm/cache.h +++ b/arch/mn10300/include/asm/cache.h @@ -43,14 +43,18 @@ /* instruction cache access registers */ #define ICACHE_DATA(WAY, ENTRY, OFF) \ - __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32) + __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + \ + (ENTRY) * L1_CACHE_BYTES + (OFF) * 4, u32) #define ICACHE_TAG(WAY, ENTRY) \ - __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32) + __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + \ + (ENTRY) * L1_CACHE_BYTES, u32) -/* instruction cache access registers */ +/* data cache access registers */ #define DCACHE_DATA(WAY, ENTRY, OFF) \ - __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32) + __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + \ + (ENTRY) * L1_CACHE_BYTES + (OFF) * 4, u32) #define DCACHE_TAG(WAY, ENTRY) \ - __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32) + __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + \ + (ENTRY) * L1_CACHE_BYTES, u32) #endif /* _ASM_CACHE_H */ diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h index 29e692f7f030..faed90240ded 100644 --- a/arch/mn10300/include/asm/cacheflush.h +++ b/arch/mn10300/include/asm/cacheflush.h @@ -17,66 +17,55 @@ #include /* - * virtually-indexed cache management (our cache is physically indexed) + * Primitive routines */ -#define flush_cache_all() do {} while (0) -#define flush_cache_mm(mm) do {} while (0) -#define flush_cache_dup_mm(mm) do {} while (0) -#define flush_cache_range(mm, start, end) do {} while (0) -#define flush_cache_page(vma, vmaddr, pfn) do {} while (0) -#define flush_cache_vmap(start, end) do {} while (0) -#define flush_cache_vunmap(start, end) do {} while (0) -#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 -#define flush_dcache_page(page) do {} while (0) -#define flush_dcache_mmap_lock(mapping) do {} while (0) -#define flush_dcache_mmap_unlock(mapping) do {} while (0) - -/* - * physically-indexed cache management - */ -#ifndef CONFIG_MN10300_CACHE_DISABLED - -extern void flush_icache_range(unsigned long start, unsigned long end); -extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg); - -#else - -#define flush_icache_range(start, end) do {} while (0) -#define flush_icache_page(vma, pg) do {} while (0) - -#endif - -#define flush_icache_user_range(vma, pg, adr, len) \ - flush_icache_range(adr, adr + len) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - memcpy(dst, src, len); \ - flush_icache_page(vma, page); \ - } while (0) - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - -/* - * primitive routines - */ -#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_CACHE_ENABLED +extern void mn10300_local_icache_inv(void); +extern void mn10300_local_icache_inv_page(unsigned long start); +extern void mn10300_local_icache_inv_range(unsigned long start, unsigned long end); +extern void mn10300_local_icache_inv_range2(unsigned long start, unsigned long size); +extern void mn10300_local_dcache_inv(void); +extern void mn10300_local_dcache_inv_page(unsigned long start); +extern void mn10300_local_dcache_inv_range(unsigned long start, unsigned long end); +extern void mn10300_local_dcache_inv_range2(unsigned long start, unsigned long size); extern void mn10300_icache_inv(void); +extern void mn10300_icache_inv_page(unsigned long start); +extern void mn10300_icache_inv_range(unsigned long start, unsigned long end); +extern void mn10300_icache_inv_range2(unsigned long start, unsigned long size); extern void mn10300_dcache_inv(void); -extern void mn10300_dcache_inv_page(unsigned start); -extern void mn10300_dcache_inv_range(unsigned start, unsigned end); -extern void mn10300_dcache_inv_range2(unsigned start, unsigned size); +extern void mn10300_dcache_inv_page(unsigned long start); +extern void mn10300_dcache_inv_range(unsigned long start, unsigned long end); +extern void mn10300_dcache_inv_range2(unsigned long start, unsigned long size); #ifdef CONFIG_MN10300_CACHE_WBACK +extern void mn10300_local_dcache_flush(void); +extern void mn10300_local_dcache_flush_page(unsigned long start); +extern void mn10300_local_dcache_flush_range(unsigned long start, unsigned long end); +extern void mn10300_local_dcache_flush_range2(unsigned long start, unsigned long size); +extern void mn10300_local_dcache_flush_inv(void); +extern void mn10300_local_dcache_flush_inv_page(unsigned long start); +extern void mn10300_local_dcache_flush_inv_range(unsigned long start, unsigned long end); +extern void mn10300_local_dcache_flush_inv_range2(unsigned long start, unsigned long size); extern void mn10300_dcache_flush(void); -extern void mn10300_dcache_flush_page(unsigned start); -extern void mn10300_dcache_flush_range(unsigned start, unsigned end); -extern void mn10300_dcache_flush_range2(unsigned start, unsigned size); +extern void mn10300_dcache_flush_page(unsigned long start); +extern void mn10300_dcache_flush_range(unsigned long start, unsigned long end); +extern void mn10300_dcache_flush_range2(unsigned long start, unsigned long size); extern void mn10300_dcache_flush_inv(void); -extern void mn10300_dcache_flush_inv_page(unsigned start); -extern void mn10300_dcache_flush_inv_range(unsigned start, unsigned end); -extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size); +extern void mn10300_dcache_flush_inv_page(unsigned long start); +extern void mn10300_dcache_flush_inv_range(unsigned long start, unsigned long end); +extern void mn10300_dcache_flush_inv_range2(unsigned long start, unsigned long size); #else +#define mn10300_local_dcache_flush() do {} while (0) +#define mn10300_local_dcache_flush_page(start) do {} while (0) +#define mn10300_local_dcache_flush_range(start, end) do {} while (0) +#define mn10300_local_dcache_flush_range2(start, size) do {} while (0) +#define mn10300_local_dcache_flush_inv() \ + mn10300_local_dcache_inv() +#define mn10300_local_dcache_flush_inv_page(start) \ + mn10300_local_dcache_inv_page(start) +#define mn10300_local_dcache_flush_inv_range(start, end) \ + mn10300_local_dcache_inv_range(start, end) +#define mn10300_local_dcache_flush_inv_range2(start, size) \ + mn10300_local_dcache_inv_range2(start, size) #define mn10300_dcache_flush() do {} while (0) #define mn10300_dcache_flush_page(start) do {} while (0) #define mn10300_dcache_flush_range(start, end) do {} while (0) @@ -90,7 +79,26 @@ extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size); mn10300_dcache_inv_range2((start), (size)) #endif /* CONFIG_MN10300_CACHE_WBACK */ #else +#define mn10300_local_icache_inv() do {} while (0) +#define mn10300_local_icache_inv_page(start) do {} while (0) +#define mn10300_local_icache_inv_range(start, end) do {} while (0) +#define mn10300_local_icache_inv_range2(start, size) do {} while (0) +#define mn10300_local_dcache_inv() do {} while (0) +#define mn10300_local_dcache_inv_page(start) do {} while (0) +#define mn10300_local_dcache_inv_range(start, end) do {} while (0) +#define mn10300_local_dcache_inv_range2(start, size) do {} while (0) +#define mn10300_local_dcache_flush() do {} while (0) +#define mn10300_local_dcache_flush_inv_page(start) do {} while (0) +#define mn10300_local_dcache_flush_inv() do {} while (0) +#define mn10300_local_dcache_flush_inv_range(start, end)do {} while (0) +#define mn10300_local_dcache_flush_inv_range2(start, size) do {} while (0) +#define mn10300_local_dcache_flush_page(start) do {} while (0) +#define mn10300_local_dcache_flush_range(start, end) do {} while (0) +#define mn10300_local_dcache_flush_range2(start, size) do {} while (0) #define mn10300_icache_inv() do {} while (0) +#define mn10300_icache_inv_page(start) do {} while (0) +#define mn10300_icache_inv_range(start, end) do {} while (0) +#define mn10300_icache_inv_range2(start, size) do {} while (0) #define mn10300_dcache_inv() do {} while (0) #define mn10300_dcache_inv_page(start) do {} while (0) #define mn10300_dcache_inv_range(start, end) do {} while (0) @@ -103,10 +111,56 @@ extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size); #define mn10300_dcache_flush_page(start) do {} while (0) #define mn10300_dcache_flush_range(start, end) do {} while (0) #define mn10300_dcache_flush_range2(start, size) do {} while (0) -#endif /* CONFIG_MN10300_CACHE_DISABLED */ +#endif /* CONFIG_MN10300_CACHE_ENABLED */ + +/* + * Virtually-indexed cache management (our cache is physically indexed) + */ +#define flush_cache_all() do {} while (0) +#define flush_cache_mm(mm) do {} while (0) +#define flush_cache_dup_mm(mm) do {} while (0) +#define flush_cache_range(mm, start, end) do {} while (0) +#define flush_cache_page(vma, vmaddr, pfn) do {} while (0) +#define flush_cache_vmap(start, end) do {} while (0) +#define flush_cache_vunmap(start, end) do {} while (0) +#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 +#define flush_dcache_page(page) do {} while (0) +#define flush_dcache_mmap_lock(mapping) do {} while (0) +#define flush_dcache_mmap_unlock(mapping) do {} while (0) + +/* + * Physically-indexed cache management + */ +#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE) +extern void flush_icache_page(struct vm_area_struct *vma, struct page *page); +extern void flush_icache_range(unsigned long start, unsigned long end); +#elif defined(CONFIG_MN10300_CACHE_INV_ICACHE) +static inline void flush_icache_page(struct vm_area_struct *vma, + struct page *page) +{ + mn10300_icache_inv_page(page_to_phys(page)); +} +extern void flush_icache_range(unsigned long start, unsigned long end); +#else +#define flush_icache_range(start, end) do {} while (0) +#define flush_icache_page(vma, pg) do {} while (0) +#endif + + +#define flush_icache_user_range(vma, pg, adr, len) \ + flush_icache_range(adr, adr + len) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + memcpy(dst, src, len); \ + flush_icache_page(vma, page); \ + } while (0) + +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) /* - * internal debugging function + * Internal debugging function */ #ifdef CONFIG_DEBUG_PAGEALLOC extern void kernel_map_pages(struct page *page, int numpages, int enable); diff --git a/arch/mn10300/include/asm/cpu-regs.h b/arch/mn10300/include/asm/cpu-regs.h index 757e9b5388ea..90ed4a365c97 100644 --- a/arch/mn10300/include/asm/cpu-regs.h +++ b/arch/mn10300/include/asm/cpu-regs.h @@ -15,7 +15,6 @@ #include #endif -#ifdef CONFIG_MN10300_CPU_AM33V2 /* we tell the compiler to pretend to be AM33 so that it doesn't try and use * the FP regs, but tell the assembler that we're actually allowed AM33v2 * instructions */ @@ -24,7 +23,6 @@ asm(" .am33_2\n"); #else .am33_2 #endif -#endif #ifdef __KERNEL__ @@ -58,6 +56,9 @@ asm(" .am33_2\n"); #define EPSW_nAR 0x00040000 /* register bank control */ #define EPSW_ML 0x00080000 /* monitor level */ #define EPSW_FE 0x00100000 /* FPU enable */ +#define EPSW_IM_SHIFT 8 /* EPSW_IM_SHIFT determines the interrupt mode */ + +#define NUM2EPSW_IM(num) ((num) << EPSW_IM_SHIFT) /* FPU registers */ #define FPCR_EF_I 0x00000001 /* inexact result FPU exception flag */ @@ -99,9 +100,11 @@ asm(" .am33_2\n"); #define CPUREV __SYSREGC(0xc0000050, u32) /* CPU revision register */ #define CPUREV_TYPE 0x0000000f /* CPU type */ #define CPUREV_TYPE_S 0 -#define CPUREV_TYPE_AM33V1 0x00000000 /* - AM33 V1 core, AM33/1.00 arch */ -#define CPUREV_TYPE_AM33V2 0x00000001 /* - AM33 V2 core, AM33/2.00 arch */ -#define CPUREV_TYPE_AM34V1 0x00000002 /* - AM34 V1 core, AM33/2.00 arch */ +#define CPUREV_TYPE_AM33_1 0x00000000 /* - AM33-1 core, AM33/1.00 arch */ +#define CPUREV_TYPE_AM33_2 0x00000001 /* - AM33-2 core, AM33/2.00 arch */ +#define CPUREV_TYPE_AM34_1 0x00000002 /* - AM34-1 core, AM33/2.00 arch */ +#define CPUREV_TYPE_AM33_3 0x00000003 /* - AM33-3 core, AM33/2.00 arch */ +#define CPUREV_TYPE_AM34_2 0x00000004 /* - AM34-2 core, AM33/3.00 arch */ #define CPUREV_REVISION 0x000000f0 /* CPU revision */ #define CPUREV_REVISION_S 4 #define CPUREV_ICWAY 0x00000f00 /* number of instruction cache ways */ @@ -180,6 +183,21 @@ asm(" .am33_2\n"); #define CHCTR_ICWMD 0x0f00 /* instruction cache way mode */ #define CHCTR_DCWMD 0xf000 /* data cache way mode */ +#ifdef CONFIG_AM34_2 +#define ICIVCR __SYSREG(0xc0000c00, u32) /* icache area invalidate control */ +#define ICIVCR_ICIVBSY 0x00000008 /* icache area invalidate busy */ +#define ICIVCR_ICI 0x00000001 /* icache area invalidate */ + +#define ICIVMR __SYSREG(0xc0000c04, u32) /* icache area invalidate mask */ + +#define DCPGCR __SYSREG(0xc0000c10, u32) /* data cache area purge control */ +#define DCPGCR_DCPGBSY 0x00000008 /* data cache area purge busy */ +#define DCPGCR_DCP 0x00000002 /* data cache area purge */ +#define DCPGCR_DCI 0x00000001 /* data cache area invalidate */ + +#define DCPGMR __SYSREG(0xc0000c14, u32) /* data cache area purge mask */ +#endif /* CONFIG_AM34_2 */ + /* MMU control registers */ #define MMUCTR __SYSREG(0xc0000090, u32) /* MMU control register */ #define MMUCTR_IRP 0x0000003f /* instruction TLB replace pointer */ @@ -203,6 +221,9 @@ asm(" .am33_2\n"); #define MMUCTR_DTL_LOCK0_3 0x03000000 /* - entry 0-3 locked */ #define MMUCTR_DTL_LOCK0_7 0x04000000 /* - entry 0-7 locked */ #define MMUCTR_DTL_LOCK0_15 0x05000000 /* - entry 0-15 locked */ +#ifdef CONFIG_AM34_2 +#define MMUCTR_WTE 0x80000000 /* write-through cache TLB entry bit enable */ +#endif #define PIDR __SYSREG(0xc0000094, u16) /* PID register */ #define PIDR_PID 0x00ff /* process identifier */ @@ -231,14 +252,6 @@ asm(" .am33_2\n"); #define xPTEL_PS_4Mb 0x00000c00 /* - 4Mb page */ #define xPTEL_PPN 0xfffff006 /* physical page number */ -#define xPTEL_V_BIT 0 /* bit numbers corresponding to above masks */ -#define xPTEL_UNUSED1_BIT 1 -#define xPTEL_UNUSED2_BIT 2 -#define xPTEL_C_BIT 3 -#define xPTEL_PV_BIT 4 -#define xPTEL_D_BIT 5 -#define xPTEL_G_BIT 9 - #define IPTEU __SYSREG(0xc00000a4, u32) /* instruction TLB virtual addr */ #define DPTEU __SYSREG(0xc00000b4, u32) /* data TLB virtual addr */ #define xPTEU_VPN 0xfffffc00 /* virtual page number */ @@ -262,7 +275,16 @@ asm(" .am33_2\n"); #define xPTEL2_PS_128Kb 0x00000100 /* - 128Kb page */ #define xPTEL2_PS_1Kb 0x00000200 /* - 1Kb page */ #define xPTEL2_PS_4Mb 0x00000300 /* - 4Mb page */ -#define xPTEL2_PPN 0xfffffc00 /* physical page number */ +#define xPTEL2_CWT 0x00000400 /* cacheable write-through */ +#define xPTEL2_UNUSED1 0x00000800 /* unused bit (broadcast mask) */ +#define xPTEL2_PPN 0xfffff000 /* physical page number */ + +#define xPTEL2_V_BIT 0 /* bit numbers corresponding to above masks */ +#define xPTEL2_C_BIT 1 +#define xPTEL2_PV_BIT 2 +#define xPTEL2_D_BIT 3 +#define xPTEL2_G_BIT 7 +#define xPTEL2_UNUSED1_BIT 11 #define MMUFCR __SYSREGC(0xc000009c, u32) /* MMU exception cause */ #define MMUFCR_IFC __SYSREGC(0xc000009c, u16) /* MMU instruction excep cause */ @@ -285,6 +307,47 @@ asm(" .am33_2\n"); #define MMUFCR_xFC_PR_RWK_RWU 0x01c0 /* - R/W kernel and R/W user */ #define MMUFCR_xFC_ILLADDR 0x0200 /* illegal address excep flag */ +#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT +/* atomic operation registers */ +#define AAR __SYSREG(0xc0000a00, u32) /* cacheable address */ +#define AAR2 __SYSREG(0xc0000a04, u32) /* uncacheable address */ +#define ADR __SYSREG(0xc0000a08, u32) /* data */ +#define ASR __SYSREG(0xc0000a0c, u32) /* status */ +#define AARU __SYSREG(0xd400aa00, u32) /* user address */ +#define ADRU __SYSREG(0xd400aa08, u32) /* user data */ +#define ASRU __SYSREG(0xd400aa0c, u32) /* user status */ + +#define ASR_RW 0x00000008 /* read */ +#define ASR_BW 0x00000004 /* bus error */ +#define ASR_IW 0x00000002 /* interrupt */ +#define ASR_LW 0x00000001 /* bus lock */ + +#define ASRU_RW ASR_RW /* read */ +#define ASRU_BW ASR_BW /* bus error */ +#define ASRU_IW ASR_IW /* interrupt */ +#define ASRU_LW ASR_LW /* bus lock */ + +/* in inline ASM, we stick the base pointer in to a reg and use offsets from + * it */ +#define ATOMIC_OPS_BASE_ADDR 0xc0000a00 +#ifndef __ASSEMBLY__ +asm( + "_AAR = 0\n" + "_AAR2 = 4\n" + "_ADR = 8\n" + "_ASR = 12\n"); +#else +#define _AAR 0 +#define _AAR2 4 +#define _ADR 8 +#define _ASR 12 +#endif + +/* physical page address for userspace atomic operations registers */ +#define USER_ATOMIC_OPS_PAGE_ADDR 0xd400a000 + +#endif /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */ + #endif /* __KERNEL__ */ #endif /* _ASM_CPU_REGS_H */ diff --git a/arch/mn10300/include/asm/dmactl-regs.h b/arch/mn10300/include/asm/dmactl-regs.h index 58a199da0f4a..80337b339c90 100644 --- a/arch/mn10300/include/asm/dmactl-regs.h +++ b/arch/mn10300/include/asm/dmactl-regs.h @@ -11,91 +11,6 @@ #ifndef _ASM_DMACTL_REGS_H #define _ASM_DMACTL_REGS_H -#include - -#ifdef __KERNEL__ - -/* DMA registers */ -#define DMxCTR(N) __SYSREG(0xd2000000 + ((N) * 0x100), u32) /* control reg */ -#define DMxCTR_BG 0x0000001f /* transfer request source */ -#define DMxCTR_BG_SOFT 0x00000000 /* - software source */ -#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */ -#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */ -#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */ -#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */ -#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */ -#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */ -#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */ -#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */ -#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */ -#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */ -#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */ -#define DMxCTR_BG_AFE 0x0000000d /* - analogue front-end interrupt source */ -#define DMxCTR_BG_ADC 0x0000000e /* - A/D conversion end interrupt source */ -#define DMxCTR_BG_IRDA 0x0000000f /* - IrDA interrupt source */ -#define DMxCTR_BG_RTC 0x00000010 /* - RTC interrupt source */ -#define DMxCTR_BG_XIRQ0 0x00000011 /* - XIRQ0 pin interrupt source */ -#define DMxCTR_BG_XIRQ1 0x00000012 /* - XIRQ1 pin interrupt source */ -#define DMxCTR_BG_XDMR0 0x00000013 /* - external request 0 source (XDMR0 pin) */ -#define DMxCTR_BG_XDMR1 0x00000014 /* - external request 1 source (XDMR1 pin) */ -#define DMxCTR_SAM 0x000000e0 /* DMA transfer src addr mode */ -#define DMxCTR_SAM_INCR 0x00000000 /* - increment */ -#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */ -#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */ -#define DMxCTR_DAM 0x00000000 /* DMA transfer dest addr mode */ -#define DMxCTR_DAM_INCR 0x00000000 /* - increment */ -#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */ -#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */ -#define DMxCTR_TM 0x00001800 /* DMA transfer mode */ -#define DMxCTR_TM_BATCH 0x00000000 /* - batch transfer */ -#define DMxCTR_TM_INTERM 0x00001000 /* - intermittent transfer */ -#define DMxCTR_UT 0x00006000 /* DMA transfer unit */ -#define DMxCTR_UT_1 0x00000000 /* - 1 byte */ -#define DMxCTR_UT_2 0x00002000 /* - 2 byte */ -#define DMxCTR_UT_4 0x00004000 /* - 4 byte */ -#define DMxCTR_UT_16 0x00006000 /* - 16 byte */ -#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */ -#define DMxCTR_RQM 0x00060000 /* external request input source mode */ -#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */ -#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */ -#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */ -#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */ -#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */ -#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */ - -#define DMxSRC(N) __SYSREG(0xd2000004 + ((N) * 0x100), u32) /* control reg */ - -#define DMxDST(N) __SYSREG(0xd2000008 + ((N) * 0x100), u32) /* src addr reg */ - -#define DMxSIZ(N) __SYSREG(0xd200000c + ((N) * 0x100), u32) /* dest addr reg */ -#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */ - -#define DMxCYC(N) __SYSREG(0xd2000010 + ((N) * 0x100), u32) /* intermittent - * size reg */ -#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */ - -#define DM0IRQ 16 /* DMA channel 0 complete IRQ */ -#define DM1IRQ 17 /* DMA channel 1 complete IRQ */ -#define DM2IRQ 18 /* DMA channel 2 complete IRQ */ -#define DM3IRQ 19 /* DMA channel 3 complete IRQ */ - -#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */ -#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */ -#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */ -#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */ - -#ifndef __ASSEMBLY__ - -struct mn10300_dmactl_regs { - u32 ctr; - const void *src; - void *dst; - u32 siz; - u32 cyc; -} __attribute__((aligned(0x100))); - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ +#include #endif /* _ASM_DMACTL_REGS_H */ diff --git a/arch/mn10300/include/asm/elf.h b/arch/mn10300/include/asm/elf.h index e5fa97cd9a14..8157c9267f42 100644 --- a/arch/mn10300/include/asm/elf.h +++ b/arch/mn10300/include/asm/elf.h @@ -31,6 +31,12 @@ #define R_MN10300_SYM_DIFF 33 /* Adjustment when relaxing. */ #define R_MN10300_ALIGN 34 /* Alignment requirement. */ +/* + * AM33/AM34 HW Capabilities + */ +#define HWCAP_MN10300_ATOMIC_OP_UNIT 1 /* Has AM34 Atomic Operations */ + + /* * ELF register definitions.. */ @@ -47,8 +53,6 @@ typedef struct { u_int32_t fpcr; } elf_fpregset_t; -extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); - /* * This is used to ensure we don't load something for the wrong architecture */ @@ -130,7 +134,11 @@ do { \ * instruction set this CPU supports. This could be done in user space, * but it's not easy, and we've already done it here. */ +#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT +#define ELF_HWCAP (HWCAP_MN10300_ATOMIC_OP_UNIT) +#else #define ELF_HWCAP (0) +#endif /* * This yields a string that ld.so will use to load implementation diff --git a/arch/mn10300/include/asm/exceptions.h b/arch/mn10300/include/asm/exceptions.h index fa16466ef3f9..ca3e20508c77 100644 --- a/arch/mn10300/include/asm/exceptions.h +++ b/arch/mn10300/include/asm/exceptions.h @@ -15,8 +15,8 @@ /* * define the breakpoint instruction opcode to use - * - note that the JTAG unit steals 0xFF, so we want to avoid that if we can - * (can use 0xF7) + * - note that the JTAG unit steals 0xFF, so you can't use JTAG and GDBSTUB at + * the same time. */ #define GDBSTUB_BKPT 0xFF @@ -90,7 +90,6 @@ enum exception_code { extern void __set_intr_stub(enum exception_code code, void *handler); extern void set_intr_stub(enum exception_code code, void *handler); -extern void set_jtag_stub(enum exception_code code, void *handler); struct pt_regs; @@ -102,7 +101,6 @@ extern asmlinkage void dtlb_aerror(void); extern asmlinkage void raw_bus_error(void); extern asmlinkage void double_fault(void); extern asmlinkage int system_call(struct pt_regs *); -extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code); extern asmlinkage void nmi(struct pt_regs *, enum exception_code); extern asmlinkage void uninitialised_exception(struct pt_regs *, enum exception_code); @@ -116,6 +114,8 @@ extern void die(const char *, struct pt_regs *, enum exception_code) extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code); +#define NUM2EXCEP_IRQ_LEVEL(num) (EXCEP_IRQ_LEVEL0 + (num) * 8) + #endif /* __ASSEMBLY__ */ #endif /* _ASM_EXCEPTIONS_H */ diff --git a/arch/mn10300/include/asm/fpu.h b/arch/mn10300/include/asm/fpu.h index 64a2b83a7a6a..b7625de8eade 100644 --- a/arch/mn10300/include/asm/fpu.h +++ b/arch/mn10300/include/asm/fpu.h @@ -12,74 +12,125 @@ #ifndef _ASM_FPU_H #define _ASM_FPU_H -#include +#ifndef __ASSEMBLY__ + +#include +#include #include -#include #ifdef __KERNEL__ -/* the task that owns the FPU state */ +extern asmlinkage void fpu_disabled(void); + +#ifdef CONFIG_FPU + +#ifdef CONFIG_LAZY_SAVE_FPU +/* the task that currently owns the FPU state */ extern struct task_struct *fpu_state_owner; +#endif -#define set_using_fpu(tsk) \ -do { \ - (tsk)->thread.fpu_flags |= THREAD_USING_FPU; \ -} while (0) +#if (THREAD_USING_FPU & ~0xff) +#error THREAD_USING_FPU must be smaller than 0x100. +#endif -#define clear_using_fpu(tsk) \ -do { \ - (tsk)->thread.fpu_flags &= ~THREAD_USING_FPU; \ -} while (0) +static inline void set_using_fpu(struct task_struct *tsk) +{ + asm volatile( + "bset %0,(0,%1)" + : + : "i"(THREAD_USING_FPU), "a"(&tsk->thread.fpu_flags) + : "memory", "cc"); +} -#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU) +static inline void clear_using_fpu(struct task_struct *tsk) +{ + asm volatile( + "bclr %0,(0,%1)" + : + : "i"(THREAD_USING_FPU), "a"(&tsk->thread.fpu_flags) + : "memory", "cc"); +} -#define unlazy_fpu(tsk) \ -do { \ - preempt_disable(); \ - if (fpu_state_owner == (tsk)) \ - fpu_save(&tsk->thread.fpu_state); \ - preempt_enable(); \ -} while (0) - -#define exit_fpu() \ -do { \ - struct task_struct *__tsk = current; \ - preempt_disable(); \ - if (fpu_state_owner == __tsk) \ - fpu_state_owner = NULL; \ - preempt_enable(); \ -} while (0) - -#define flush_fpu() \ -do { \ - struct task_struct *__tsk = current; \ - preempt_disable(); \ - if (fpu_state_owner == __tsk) { \ - fpu_state_owner = NULL; \ - __tsk->thread.uregs->epsw &= ~EPSW_FE; \ - } \ - preempt_enable(); \ - clear_using_fpu(__tsk); \ -} while (0) +#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU) -extern asmlinkage void fpu_init_state(void); extern asmlinkage void fpu_kill_state(struct task_struct *); -extern asmlinkage void fpu_disabled(struct pt_regs *, enum exception_code); extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code); - -#ifdef CONFIG_FPU +extern asmlinkage void fpu_invalid_op(struct pt_regs *, enum exception_code); +extern asmlinkage void fpu_init_state(void); extern asmlinkage void fpu_save(struct fpu_state_struct *); -extern asmlinkage void fpu_restore(struct fpu_state_struct *); -#else -#define fpu_save(a) -#define fpu_restore(a) -#endif /* CONFIG_FPU */ - -/* - * signal frame handlers - */ extern int fpu_setup_sigcontext(struct fpucontext *buf); extern int fpu_restore_sigcontext(struct fpucontext *buf); +static inline void unlazy_fpu(struct task_struct *tsk) +{ + preempt_disable(); +#ifndef CONFIG_LAZY_SAVE_FPU + if (tsk->thread.fpu_flags & THREAD_HAS_FPU) { + fpu_save(&tsk->thread.fpu_state); + tsk->thread.fpu_flags &= ~THREAD_HAS_FPU; + tsk->thread.uregs->epsw &= ~EPSW_FE; + } +#else + if (fpu_state_owner == tsk) + fpu_save(&tsk->thread.fpu_state); +#endif + preempt_enable(); +} + +static inline void exit_fpu(void) +{ +#ifdef CONFIG_LAZY_SAVE_FPU + struct task_struct *tsk = current; + + preempt_disable(); + if (fpu_state_owner == tsk) + fpu_state_owner = NULL; + preempt_enable(); +#endif +} + +static inline void flush_fpu(void) +{ + struct task_struct *tsk = current; + + preempt_disable(); +#ifndef CONFIG_LAZY_SAVE_FPU + if (tsk->thread.fpu_flags & THREAD_HAS_FPU) { + tsk->thread.fpu_flags &= ~THREAD_HAS_FPU; + tsk->thread.uregs->epsw &= ~EPSW_FE; + } +#else + if (fpu_state_owner == tsk) { + fpu_state_owner = NULL; + tsk->thread.uregs->epsw &= ~EPSW_FE; + } +#endif + preempt_enable(); + clear_using_fpu(tsk); +} + +#else /* CONFIG_FPU */ + +extern asmlinkage +void unexpected_fpu_exception(struct pt_regs *, enum exception_code); +#define fpu_invalid_op unexpected_fpu_exception +#define fpu_exception unexpected_fpu_exception + +struct task_struct; +struct fpu_state_struct; +static inline bool is_using_fpu(struct task_struct *tsk) { return false; } +static inline void set_using_fpu(struct task_struct *tsk) {} +static inline void clear_using_fpu(struct task_struct *tsk) {} +static inline void fpu_init_state(void) {} +static inline void fpu_save(struct fpu_state_struct *s) {} +static inline void fpu_kill_state(struct task_struct *tsk) {} +static inline void unlazy_fpu(struct task_struct *tsk) {} +static inline void exit_fpu(void) {} +static inline void flush_fpu(void) {} +static inline int fpu_setup_sigcontext(struct fpucontext *buf) { return 0; } +static inline int fpu_restore_sigcontext(struct fpucontext *buf) { return 0; } +#endif /* CONFIG_FPU */ + #endif /* __KERNEL__ */ +#endif /* !__ASSEMBLY__ */ #endif /* _ASM_FPU_H */ diff --git a/arch/mn10300/include/asm/frame.inc b/arch/mn10300/include/asm/frame.inc index 5b1949bdf039..2ee58e3eb6b3 100644 --- a/arch/mn10300/include/asm/frame.inc +++ b/arch/mn10300/include/asm/frame.inc @@ -18,6 +18,7 @@ #ifndef __ASM_OFFSETS_H__ #include #endif +#include #define pi break @@ -37,11 +38,15 @@ movm [d2,d3,a2,a3,exreg0,exreg1,exother],(sp) mov sp,fp # FRAME pointer in A3 add -12,sp # allow for calls to be made - mov (__frame),a1 - mov a1,(REG_NEXT,fp) - mov fp,(__frame) - and ~EPSW_FE,epsw # disable the FPU inside the kernel + # push the exception frame onto the front of the list + GET_THREAD_INFO a1 + mov (TI_frame,a1),a0 + mov a0,(REG_NEXT,fp) + mov fp,(TI_frame,a1) + + # disable the FPU inside the kernel + and ~EPSW_FE,epsw # we may be holding current in E2 #ifdef CONFIG_MN10300_CURRENT_IN_E2 @@ -57,10 +62,11 @@ .macro RESTORE_ALL # peel back the stack to the calling frame # - this permits execve() to discard extra frames due to kernel syscalls - mov (__frame),fp + GET_THREAD_INFO a0 + mov (TI_frame,a0),fp mov fp,sp - mov (REG_NEXT,fp),d0 # userspace has regs->next == 0 - mov d0,(__frame) + mov (REG_NEXT,fp),d0 + mov d0,(TI_frame,a0) # userspace has regs->next == 0 #ifndef CONFIG_MN10300_USING_JTAG mov (REG_EPSW,fp),d0 diff --git a/arch/mn10300/include/asm/gdb-stub.h b/arch/mn10300/include/asm/gdb-stub.h index 41ed26763964..f5495ad82b77 100644 --- a/arch/mn10300/include/asm/gdb-stub.h +++ b/arch/mn10300/include/asm/gdb-stub.h @@ -110,7 +110,7 @@ extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code); extern asmlinkage void __gdbstub_bug_trap(void); extern asmlinkage void __gdbstub_pause(void); -#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_CACHE_ENABLED extern asmlinkage void gdbstub_purge_cache(void); #else #define gdbstub_purge_cache() do {} while (0) diff --git a/arch/mn10300/include/asm/hardirq.h b/arch/mn10300/include/asm/hardirq.h index 54d950117674..0000d650b55f 100644 --- a/arch/mn10300/include/asm/hardirq.h +++ b/arch/mn10300/include/asm/hardirq.h @@ -19,9 +19,10 @@ /* assembly code in softirq.h is sensitive to the offsets of these fields */ typedef struct { unsigned int __softirq_pending; - unsigned long idle_timestamp; +#ifdef CONFIG_MN10300_WD_TIMER unsigned int __nmi_count; /* arch dependent */ unsigned int __irq_count; /* arch dependent */ +#endif } ____cacheline_aligned irq_cpustat_t; #include /* Standard mappings for irq_cpustat_t above */ diff --git a/arch/mn10300/include/asm/highmem.h b/arch/mn10300/include/asm/highmem.h index e2155e686451..bfe2d88604d9 100644 --- a/arch/mn10300/include/asm/highmem.h +++ b/arch/mn10300/include/asm/highmem.h @@ -87,7 +87,7 @@ static inline unsigned long __kmap_atomic(struct page *page) BUG(); #endif set_pte(kmap_pte - idx, mk_pte(page, kmap_prot)); - __flush_tlb_one(vaddr); + local_flush_tlb_one(vaddr); return vaddr; } @@ -116,7 +116,7 @@ static inline void __kunmap_atomic(unsigned long vaddr) * this pte without first remap it */ pte_clear(kmap_pte - idx); - __flush_tlb_one(vaddr); + local_flush_tlb_one(vaddr); } #endif diff --git a/arch/mn10300/include/asm/intctl-regs.h b/arch/mn10300/include/asm/intctl-regs.h index ba544c796c5a..585b708c2bc0 100644 --- a/arch/mn10300/include/asm/intctl-regs.h +++ b/arch/mn10300/include/asm/intctl-regs.h @@ -15,24 +15,19 @@ #ifdef __KERNEL__ -/* interrupt controller registers */ -#define GxICR(X) __SYSREG(0xd4000000 + (X) * 4, u16) /* group irq ctrl regs */ - -#define IAGR __SYSREG(0xd4000100, u16) /* intr acceptance group reg */ -#define IAGR_GN 0x00fc /* group number register - * (documentation _has_ to be wrong) - */ +/* + * Interrupt controller registers + * - Registers 64-191 are at addresses offset from the main array + */ +#define GxICR(X) \ + __SYSREG(0xd4000000 + (X) * 4 + \ + (((X) >= 64) && ((X) < 192)) * 0xf00, u16) -#define EXTMD __SYSREG(0xd4000200, u16) /* external pin intr spec reg */ -#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3) +#define GxICR_u8(X) \ + __SYSREG(0xd4000000 + (X) * 4 + \ + (((X) >= 64) && ((X) < 192)) * 0xf00, u8) -#define SET_XIRQ_TRIGGER(X,Y) \ -do { \ - u16 x = EXTMD; \ - x &= ~(3 << ((X) * 2)); \ - x |= ((Y) & 3) << ((X) * 2); \ - EXTMD = x; \ -} while (0) +#include #define XIRQ_TRIGGER_LOWLEVEL 0 #define XIRQ_TRIGGER_HILEVEL 1 @@ -59,10 +54,18 @@ do { \ #define GxICR_LEVEL_5 0x5000 /* - level 5 */ #define GxICR_LEVEL_6 0x6000 /* - level 6 */ #define GxICR_LEVEL_SHIFT 12 +#define GxICR_NMI 0x8000 /* nmi request flag */ + +#define NUM2GxICR_LEVEL(num) ((num) << GxICR_LEVEL_SHIFT) #ifndef __ASSEMBLY__ extern void set_intr_level(int irq, u16 level); -extern void set_intr_postackable(int irq); +extern void mn10300_intc_set_level(unsigned int irq, unsigned int level); +extern void mn10300_intc_clear(unsigned int irq); +extern void mn10300_intc_set(unsigned int irq); +extern void mn10300_intc_enable(unsigned int irq); +extern void mn10300_intc_disable(unsigned int irq); +extern void mn10300_set_lateack_irq_type(int irq); #endif /* external interrupts */ diff --git a/arch/mn10300/include/asm/io.h b/arch/mn10300/include/asm/io.h index c1a4119e6497..787255da744e 100644 --- a/arch/mn10300/include/asm/io.h +++ b/arch/mn10300/include/asm/io.h @@ -206,6 +206,19 @@ static inline void outsl(unsigned long addr, const void *buffer, int count) #define iowrite32_rep(p, src, count) \ outsl((unsigned long) (p), (src), (count)) +#define readsb(p, dst, count) \ + insb((unsigned long) (p), (dst), (count)) +#define readsw(p, dst, count) \ + insw((unsigned long) (p), (dst), (count)) +#define readsl(p, dst, count) \ + insl((unsigned long) (p), (dst), (count)) + +#define writesb(p, src, count) \ + outsb((unsigned long) (p), (src), (count)) +#define writesw(p, src, count) \ + outsw((unsigned long) (p), (src), (count)) +#define writesl(p, src, count) \ + outsl((unsigned long) (p), (src), (count)) #define IO_SPACE_LIMIT 0xffffffff diff --git a/arch/mn10300/include/asm/irq.h b/arch/mn10300/include/asm/irq.h index 25c045d16d1c..1a73fb3f60c6 100644 --- a/arch/mn10300/include/asm/irq.h +++ b/arch/mn10300/include/asm/irq.h @@ -21,8 +21,16 @@ /* this number is used when no interrupt has been assigned */ #define NO_IRQ INT_MAX -/* hardware irq numbers */ -#define NR_IRQS GxICR_NUM_IRQS +/* + * hardware irq numbers + * - the ASB2364 has an FPGA with an IRQ multiplexer on it + */ +#ifdef CONFIG_MN10300_UNIT_ASB2364 +#include +#else +#define NR_CPU_IRQS GxICR_NUM_IRQS +#define NR_IRQS NR_CPU_IRQS +#endif /* external hardware irq numbers */ #define NR_XIRQS GxICR_NUM_XIRQS diff --git a/arch/mn10300/include/asm/irq_regs.h b/arch/mn10300/include/asm/irq_regs.h index a848cd232eb4..97d0cb5af807 100644 --- a/arch/mn10300/include/asm/irq_regs.h +++ b/arch/mn10300/include/asm/irq_regs.h @@ -18,7 +18,11 @@ #define ARCH_HAS_OWN_IRQ_REGS #ifndef __ASSEMBLY__ -#define get_irq_regs() (__frame) +static inline __attribute__((const)) +struct pt_regs *get_irq_regs(void) +{ + return current_frame(); +} #endif #endif /* _ASM_IRQ_REGS_H */ diff --git a/arch/mn10300/include/asm/irqflags.h b/arch/mn10300/include/asm/irqflags.h index 5e529a117cb2..7a7ae12c7119 100644 --- a/arch/mn10300/include/asm/irqflags.h +++ b/arch/mn10300/include/asm/irqflags.h @@ -13,6 +13,9 @@ #define _ASM_IRQFLAGS_H #include +#ifndef __ASSEMBLY__ +#include +#endif /* * interrupt control @@ -23,11 +26,7 @@ * - level 6 - timer interrupt * - "enabled": run in IM7 */ -#ifdef CONFIG_MN10300_TTYSM -#define MN10300_CLI_LEVEL EPSW_IM_2 -#else -#define MN10300_CLI_LEVEL EPSW_IM_1 -#endif +#define MN10300_CLI_LEVEL (CONFIG_LINUX_CLI_LEVEL << EPSW_IM_SHIFT) #ifndef __ASSEMBLY__ @@ -64,11 +63,12 @@ static inline unsigned long arch_local_irq_save(void) /* * we make sure arch_irq_enable() doesn't cause priority inversion */ -extern unsigned long __mn10300_irq_enabled_epsw; +extern unsigned long __mn10300_irq_enabled_epsw[]; static inline void arch_local_irq_enable(void) { unsigned long tmp; + int cpu = raw_smp_processor_id(); asm volatile( " mov epsw,%0 \n" @@ -76,8 +76,8 @@ static inline void arch_local_irq_enable(void) " or %2,%0 \n" " mov %0,epsw \n" : "=&d"(tmp) - : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) - : "memory"); + : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw[cpu]) + : "memory", "cc"); } static inline void arch_local_irq_restore(unsigned long flags) @@ -94,7 +94,7 @@ static inline void arch_local_irq_restore(unsigned long flags) static inline bool arch_irqs_disabled_flags(unsigned long flags) { - return (flags & EPSW_IM) <= MN10300_CLI_LEVEL; + return (flags & (EPSW_IE | EPSW_IM)) != (EPSW_IE | EPSW_IM_7); } static inline bool arch_irqs_disabled(void) @@ -109,6 +109,9 @@ static inline bool arch_irqs_disabled(void) */ static inline void arch_safe_halt(void) { +#ifdef CONFIG_SMP + arch_local_irq_enable(); +#else asm volatile( " or %0,epsw \n" " nop \n" @@ -117,7 +120,97 @@ static inline void arch_safe_halt(void) : : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP) : "cc"); +#endif } +#define __sleep_cpu() \ +do { \ + asm volatile( \ + " bset %1,(%0)\n" \ + "1: btst %1,(%0)\n" \ + " bne 1b\n" \ + : \ + : "i"(&CPUM), "i"(CPUM_SLEEP) \ + : "cc" \ + ); \ +} while (0) + +static inline void arch_local_cli(void) +{ + asm volatile( + " and %0,epsw \n" + " nop \n" + " nop \n" + " nop \n" + : + : "i"(~EPSW_IE) + : "memory" + ); +} + +static inline unsigned long arch_local_cli_save(void) +{ + unsigned long flags = arch_local_save_flags(); + arch_local_cli(); + return flags; +} + +static inline void arch_local_sti(void) +{ + asm volatile( + " or %0,epsw \n" + : + : "i"(EPSW_IE) + : "memory"); +} + +static inline void arch_local_change_intr_mask_level(unsigned long level) +{ + asm volatile( + " and %0,epsw \n" + " or %1,epsw \n" + : + : "i"(~EPSW_IM), "i"(EPSW_IE | level) + : "cc", "memory"); +} + +#else /* !__ASSEMBLY__ */ + +#define LOCAL_SAVE_FLAGS(reg) \ + mov epsw,reg + +#define LOCAL_IRQ_DISABLE \ + and ~EPSW_IM,epsw; \ + or EPSW_IE|MN10300_CLI_LEVEL,epsw; \ + nop; \ + nop; \ + nop + +#define LOCAL_IRQ_ENABLE \ + or EPSW_IE|EPSW_IM_7,epsw + +#define LOCAL_IRQ_RESTORE(reg) \ + mov reg,epsw + +#define LOCAL_CLI_SAVE(reg) \ + mov epsw,reg; \ + and ~EPSW_IE,epsw; \ + nop; \ + nop; \ + nop + +#define LOCAL_CLI \ + and ~EPSW_IE,epsw; \ + nop; \ + nop; \ + nop + +#define LOCAL_STI \ + or EPSW_IE,epsw + +#define LOCAL_CHANGE_INTR_MASK_LEVEL(level) \ + and ~EPSW_IM,epsw; \ + or EPSW_IE|(level),epsw + #endif /* __ASSEMBLY__ */ #endif /* _ASM_IRQFLAGS_H */ diff --git a/arch/mn10300/include/asm/mmu_context.h b/arch/mn10300/include/asm/mmu_context.h index cb294c244de3..c8f6c82672ad 100644 --- a/arch/mn10300/include/asm/mmu_context.h +++ b/arch/mn10300/include/asm/mmu_context.h @@ -27,28 +27,38 @@ #include #include +#define MMU_CONTEXT_TLBPID_NR 256 #define MMU_CONTEXT_TLBPID_MASK 0x000000ffUL #define MMU_CONTEXT_VERSION_MASK 0xffffff00UL #define MMU_CONTEXT_FIRST_VERSION 0x00000100UL #define MMU_NO_CONTEXT 0x00000000UL - -extern unsigned long mmu_context_cache[NR_CPUS]; -#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()]) +#define MMU_CONTEXT_TLBPID_LOCK_NR 0 #define enter_lazy_tlb(mm, tsk) do {} while (0) +static inline void cpu_ran_vm(int cpu, struct mm_struct *mm) +{ #ifdef CONFIG_SMP -#define cpu_ran_vm(cpu, mm) \ - cpumask_set_cpu((cpu), mm_cpumask(mm)) -#define cpu_maybe_ran_vm(cpu, mm) \ - cpumask_test_and_set_cpu((cpu), mm_cpumask(mm)) + cpumask_set_cpu(cpu, mm_cpumask(mm)); +#endif +} + +static inline bool cpu_maybe_ran_vm(int cpu, struct mm_struct *mm) +{ +#ifdef CONFIG_SMP + return cpumask_test_and_set_cpu(cpu, mm_cpumask(mm)); #else -#define cpu_ran_vm(cpu, mm) do {} while (0) -#define cpu_maybe_ran_vm(cpu, mm) true -#endif /* CONFIG_SMP */ + return true; +#endif +} -/* - * allocate an MMU context +#ifdef CONFIG_MN10300_TLB_USE_PIDR +extern unsigned long mmu_context_cache[NR_CPUS]; +#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()]) + +/** + * allocate_mmu_context - Allocate storage for the arch-specific MMU data + * @mm: The userspace VM context being set up */ static inline unsigned long allocate_mmu_context(struct mm_struct *mm) { @@ -58,7 +68,7 @@ static inline unsigned long allocate_mmu_context(struct mm_struct *mm) if (!(mc & MMU_CONTEXT_TLBPID_MASK)) { /* we exhausted the TLB PIDs of this version on this CPU, so we * flush this CPU's TLB in its entirety and start new cycle */ - flush_tlb_all(); + local_flush_tlb_all(); /* fix the TLB version if needed (we avoid version #0 so as to * distingush MMU_NO_CONTEXT) */ @@ -100,23 +110,35 @@ static inline int init_new_context(struct task_struct *tsk, return 0; } -/* - * destroy context related info for an mm_struct that is about to be put to - * rest - */ -#define destroy_context(mm) do { } while (0) - /* * after we have set current->mm to a new value, this activates the context for * the new mm so we see the new mappings. */ -static inline void activate_context(struct mm_struct *mm, int cpu) +static inline void activate_context(struct mm_struct *mm) { PIDR = get_mmu_context(mm) & MMU_CONTEXT_TLBPID_MASK; } +#else /* CONFIG_MN10300_TLB_USE_PIDR */ -/* - * change between virtual memory sets +#define init_new_context(tsk, mm) (0) +#define activate_context(mm) local_flush_tlb() + +#endif /* CONFIG_MN10300_TLB_USE_PIDR */ + +/** + * destroy_context - Destroy mm context information + * @mm: The MM being destroyed. + * + * Destroy context related info for an mm_struct that is about to be put to + * rest + */ +#define destroy_context(mm) do {} while (0) + +/** + * switch_mm - Change between userspace virtual memory contexts + * @prev: The outgoing MM context. + * @next: The incoming MM context. + * @tsk: The incoming task. */ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) @@ -124,11 +146,12 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, int cpu = smp_processor_id(); if (prev != next) { +#ifdef CONFIG_SMP + per_cpu(cpu_tlbstate, cpu).active_mm = next; +#endif cpu_ran_vm(cpu, next); - activate_context(next, cpu); PTBR = (unsigned long) next->pgd; - } else if (!cpu_maybe_ran_vm(cpu, next)) { - activate_context(next, cpu); + activate_context(next); } } diff --git a/arch/mn10300/include/asm/pgalloc.h b/arch/mn10300/include/asm/pgalloc.h index a19f11327cd8..146bacf193ea 100644 --- a/arch/mn10300/include/asm/pgalloc.h +++ b/arch/mn10300/include/asm/pgalloc.h @@ -11,7 +11,6 @@ #ifndef _ASM_PGALLOC_H #define _ASM_PGALLOC_H -#include #include #include #include /* for struct page */ diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h index b049a8bd1577..a1e894b5f65b 100644 --- a/arch/mn10300/include/asm/pgtable.h +++ b/arch/mn10300/include/asm/pgtable.h @@ -90,46 +90,58 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; * The vmalloc() routines also leaves a hole of 4kB between each vmalloced * area to catch addressing errors. */ +#ifndef __ASSEMBLY__ +#define VMALLOC_OFFSET (8UL * 1024 * 1024) +#define VMALLOC_START (0x70000000UL) +#define VMALLOC_END (0x7C000000UL) +#else #define VMALLOC_OFFSET (8 * 1024 * 1024) #define VMALLOC_START (0x70000000) #define VMALLOC_END (0x7C000000) +#endif #ifndef __ASSEMBLY__ extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE]; #endif -/* IPTEL/DPTEL bit assignments */ -#define _PAGE_BIT_VALID xPTEL_V_BIT -#define _PAGE_BIT_ACCESSED xPTEL_UNUSED1_BIT /* mustn't be loaded into IPTEL/DPTEL */ -#define _PAGE_BIT_NX xPTEL_UNUSED2_BIT /* mustn't be loaded into IPTEL/DPTEL */ -#define _PAGE_BIT_CACHE xPTEL_C_BIT -#define _PAGE_BIT_PRESENT xPTEL_PV_BIT -#define _PAGE_BIT_DIRTY xPTEL_D_BIT -#define _PAGE_BIT_GLOBAL xPTEL_G_BIT - -#define _PAGE_VALID xPTEL_V -#define _PAGE_ACCESSED xPTEL_UNUSED1 -#define _PAGE_NX xPTEL_UNUSED2 /* no-execute bit */ -#define _PAGE_CACHE xPTEL_C -#define _PAGE_PRESENT xPTEL_PV -#define _PAGE_DIRTY xPTEL_D -#define _PAGE_PROT xPTEL_PR -#define _PAGE_PROT_RKNU xPTEL_PR_ROK -#define _PAGE_PROT_WKNU xPTEL_PR_RWK -#define _PAGE_PROT_RKRU xPTEL_PR_ROK_ROU -#define _PAGE_PROT_WKRU xPTEL_PR_RWK_ROU -#define _PAGE_PROT_WKWU xPTEL_PR_RWK_RWU -#define _PAGE_GLOBAL xPTEL_G -#define _PAGE_PSE xPTEL_PS_4Mb /* 4MB page */ - -#define _PAGE_FILE xPTEL_UNUSED1_BIT /* set:pagecache unset:swap */ - -#define __PAGE_PROT_UWAUX 0x040 -#define __PAGE_PROT_USER 0x080 -#define __PAGE_PROT_WRITE 0x100 +/* IPTEL2/DPTEL2 bit assignments */ +#define _PAGE_BIT_VALID xPTEL2_V_BIT +#define _PAGE_BIT_CACHE xPTEL2_C_BIT +#define _PAGE_BIT_PRESENT xPTEL2_PV_BIT +#define _PAGE_BIT_DIRTY xPTEL2_D_BIT +#define _PAGE_BIT_GLOBAL xPTEL2_G_BIT +#define _PAGE_BIT_ACCESSED xPTEL2_UNUSED1_BIT /* mustn't be loaded into IPTEL2/DPTEL2 */ + +#define _PAGE_VALID xPTEL2_V +#define _PAGE_CACHE xPTEL2_C +#define _PAGE_PRESENT xPTEL2_PV +#define _PAGE_DIRTY xPTEL2_D +#define _PAGE_PROT xPTEL2_PR +#define _PAGE_PROT_RKNU xPTEL2_PR_ROK +#define _PAGE_PROT_WKNU xPTEL2_PR_RWK +#define _PAGE_PROT_RKRU xPTEL2_PR_ROK_ROU +#define _PAGE_PROT_WKRU xPTEL2_PR_RWK_ROU +#define _PAGE_PROT_WKWU xPTEL2_PR_RWK_RWU +#define _PAGE_GLOBAL xPTEL2_G +#define _PAGE_PS_MASK xPTEL2_PS +#define _PAGE_PS_4Kb xPTEL2_PS_4Kb +#define _PAGE_PS_128Kb xPTEL2_PS_128Kb +#define _PAGE_PS_1Kb xPTEL2_PS_1Kb +#define _PAGE_PS_4Mb xPTEL2_PS_4Mb +#define _PAGE_PSE xPTEL2_PS_4Mb /* 4MB page */ +#define _PAGE_CACHE_WT xPTEL2_CWT +#define _PAGE_ACCESSED xPTEL2_UNUSED1 +#define _PAGE_NX 0 /* no-execute bit */ + +/* If _PAGE_VALID is clear, we use these: */ +#define _PAGE_FILE xPTEL2_C /* set:pagecache unset:swap */ +#define _PAGE_PROTNONE 0x000 /* If not present */ + +#define __PAGE_PROT_UWAUX 0x010 +#define __PAGE_PROT_USER 0x020 +#define __PAGE_PROT_WRITE 0x040 #define _PAGE_PRESENTV (_PAGE_PRESENT|_PAGE_VALID) -#define _PAGE_PROTNONE 0x000 /* If not present */ #ifndef __ASSEMBLY__ @@ -170,6 +182,9 @@ extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE]; #define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE) #define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC) +#define __PAGE_USERIO (__PAGE_KERNEL_BASE | _PAGE_PROT_WKWU | _PAGE_NX) +#define PAGE_USERIO __pgprot(__PAGE_USERIO) + /* * Whilst the MN10300 can do page protection for execute (given separate data * and insn TLBs), we are not supporting it at the moment. Write permission, @@ -323,11 +338,7 @@ static inline int pte_exec_kernel(pte_t pte) return 1; } -/* - * Bits 0 and 1 are taken, split up the 29 bits of offset - * into this range: - */ -#define PTE_FILE_MAX_BITS 29 +#define PTE_FILE_MAX_BITS 30 #define pte_to_pgoff(pte) (pte_val(pte) >> 2) #define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE) @@ -373,8 +384,13 @@ static inline void ptep_mkdirty(pte_t *ptep) * Macro to mark a page protection value as "uncacheable". On processors which * do not support it, this is a no-op. */ -#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE) +#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHE) +/* + * Macro to mark a page protection value as "Write-Through". + * On processors which do not support it, this is a no-op. + */ +#define pgprot_through(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE_WT) /* * Conversion functions: convert a page and protection to a page entry, diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h index f7d4b0d285e8..4c1b5cc14c19 100644 --- a/arch/mn10300/include/asm/processor.h +++ b/arch/mn10300/include/asm/processor.h @@ -13,10 +13,13 @@ #ifndef _ASM_PROCESSOR_H #define _ASM_PROCESSOR_H +#include +#include #include #include #include -#include +#include +#include /* Forward declaration, a strange C thing */ struct task_struct; @@ -33,6 +36,8 @@ struct mm_struct; __pc; \ }) +extern void get_mem_info(unsigned long *mem_base, unsigned long *mem_size); + extern void show_registers(struct pt_regs *regs); /* @@ -43,17 +48,22 @@ extern void show_registers(struct pt_regs *regs); struct mn10300_cpuinfo { int type; - unsigned long loops_per_sec; + unsigned long loops_per_jiffy; char hard_math; - unsigned long *pgd_quick; - unsigned long *pte_quick; - unsigned long pgtable_cache_sz; }; extern struct mn10300_cpuinfo boot_cpu_data; +#ifdef CONFIG_SMP +#if CONFIG_NR_CPUS < 2 || CONFIG_NR_CPUS > 8 +# error Sorry, NR_CPUS should be 2 to 8 +#endif +extern struct mn10300_cpuinfo cpu_data[]; +#define current_cpu_data cpu_data[smp_processor_id()] +#else /* CONFIG_SMP */ #define cpu_data &boot_cpu_data #define current_cpu_data boot_cpu_data +#endif /* CONFIG_SMP */ extern void identify_cpu(struct mn10300_cpuinfo *); extern void print_cpu_info(struct mn10300_cpuinfo *); @@ -76,10 +86,6 @@ extern void dodgy_tsc(void); */ #define TASK_UNMAPPED_BASE 0x30000000 -typedef struct { - unsigned long seg; -} mm_segment_t; - struct fpu_state_struct { unsigned long fs[32]; /* fpu registers */ unsigned long fpcr; /* fpu control register */ @@ -92,20 +98,19 @@ struct thread_struct { unsigned long a3; /* kernel FP */ unsigned long wchan; unsigned long usp; - struct pt_regs *__frame; unsigned long fpu_flags; #define THREAD_USING_FPU 0x00000001 /* T if this task is using the FPU */ +#define THREAD_HAS_FPU 0x00000002 /* T if this task owns the FPU right now */ struct fpu_state_struct fpu_state; }; -#define INIT_THREAD \ -{ \ - .uregs = init_uregs, \ - .pc = 0, \ - .sp = 0, \ - .a3 = 0, \ - .wchan = 0, \ - .__frame = NULL, \ +#define INIT_THREAD \ +{ \ + .uregs = init_uregs, \ + .pc = 0, \ + .sp = 0, \ + .a3 = 0, \ + .wchan = 0, \ } #define INIT_MMAP \ @@ -117,13 +122,20 @@ struct thread_struct { * - need to discard the frame stacked by the kernel thread invoking the execve * syscall (see RESTORE_ALL macro) */ -#define start_thread(regs, new_pc, new_sp) do { \ - set_fs(USER_DS); \ - __frame = current->thread.uregs; \ - __frame->epsw = EPSW_nSL | EPSW_IE | EPSW_IM; \ - __frame->pc = new_pc; \ - __frame->sp = new_sp; \ -} while (0) +static inline void start_thread(struct pt_regs *regs, + unsigned long new_pc, unsigned long new_sp) +{ + struct thread_info *ti = current_thread_info(); + struct pt_regs *frame0; + set_fs(USER_DS); + + frame0 = thread_info_to_uregs(ti); + frame0->epsw = EPSW_nSL | EPSW_IE | EPSW_IM; + frame0->pc = new_pc; + frame0->sp = new_sp; + ti->frame = frame0; +} + /* Free all resources held by a thread. */ extern void release_thread(struct task_struct *); @@ -157,7 +169,7 @@ unsigned long get_wchan(struct task_struct *p); static inline void prefetch(const void *x) { -#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_CACHE_ENABLED #ifdef CONFIG_MN10300_PROC_MN103E010 asm volatile ("nop; nop; dcpf (%0)" : : "r"(x)); #else @@ -168,7 +180,7 @@ static inline void prefetch(const void *x) static inline void prefetchw(const void *x) { -#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_CACHE_ENABLED #ifdef CONFIG_MN10300_PROC_MN103E010 asm volatile ("nop; nop; dcpf (%0)" : : "r"(x)); #else diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h index 7c2e911052b6..b6961811d445 100644 --- a/arch/mn10300/include/asm/ptrace.h +++ b/arch/mn10300/include/asm/ptrace.h @@ -40,7 +40,6 @@ #define PT_PC 26 #define NR_PTREGS 27 -#ifndef __ASSEMBLY__ /* * This defines the way registers are stored in the event of an exception * - the strange order is due to the MOVM instruction @@ -75,7 +74,6 @@ struct pt_regs { unsigned long epsw; unsigned long pc; }; -#endif /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ #define PTRACE_GETREGS 12 @@ -86,12 +84,7 @@ struct pt_regs { /* options set using PTRACE_SETOPTIONS */ #define PTRACE_O_TRACESYSGOOD 0x00000001 -#if defined(__KERNEL__) - -extern struct pt_regs *__frame; /* current frame pointer */ - -#if !defined(__ASSEMBLY__) -struct task_struct; +#ifdef __KERNEL__ #define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL) #define instruction_pointer(regs) ((regs)->pc) @@ -100,9 +93,7 @@ extern void show_regs(struct pt_regs *); #define arch_has_single_step() (1) -#endif /* !__ASSEMBLY */ - #define profile_pc(regs) ((regs)->pc) -#endif /* __KERNEL__ */ +#endif /* __KERNEL__ */ #endif /* _ASM_PTRACE_H */ diff --git a/arch/mn10300/include/asm/reset-regs.h b/arch/mn10300/include/asm/reset-regs.h index 174523d50132..10c7502a113f 100644 --- a/arch/mn10300/include/asm/reset-regs.h +++ b/arch/mn10300/include/asm/reset-regs.h @@ -50,7 +50,7 @@ static inline void mn10300_proc_hard_reset(void) RSTCTR |= RSTCTR_CHIPRST; } -extern unsigned int watchdog_alert_counter; +extern unsigned int watchdog_alert_counter[]; extern void watchdog_go(void); extern asmlinkage void watchdog_handler(void); diff --git a/arch/mn10300/include/asm/rtc.h b/arch/mn10300/include/asm/rtc.h index c295194cc703..6c14bb1d0d9b 100644 --- a/arch/mn10300/include/asm/rtc.h +++ b/arch/mn10300/include/asm/rtc.h @@ -15,25 +15,14 @@ #include -extern void check_rtc_time(void); extern void __init calibrate_clock(void); -extern unsigned long __init get_initial_rtc_time(void); #else /* !CONFIG_MN10300_RTC */ -static inline void check_rtc_time(void) -{ -} - static inline void calibrate_clock(void) { } -static inline unsigned long get_initial_rtc_time(void) -{ - return 0; -} - #endif /* !CONFIG_MN10300_RTC */ #include diff --git a/arch/mn10300/include/asm/rwlock.h b/arch/mn10300/include/asm/rwlock.h new file mode 100644 index 000000000000..6d594d4a0e10 --- /dev/null +++ b/arch/mn10300/include/asm/rwlock.h @@ -0,0 +1,125 @@ +/* + * Helpers used by both rw spinlocks and rw semaphores. + * + * Based in part on code from semaphore.h and + * spinlock.h Copyright 1996 Linus Torvalds. + * + * Copyright 1999 Red Hat, Inc. + * + * Written by Benjamin LaHaise. + * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 13-Nov-2006 MEI Temporarily delete lock functions for SMP support. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ +#ifndef _ASM_RWLOCK_H +#define _ASM_RWLOCK_H + +#define RW_LOCK_BIAS 0x01000000 + +#ifndef CONFIG_SMP + +typedef struct { unsigned long a[100]; } __dummy_lock_t; +#define __dummy_lock(lock) (*(__dummy_lock_t *)(lock)) + +#define RW_LOCK_BIAS_STR "0x01000000" + +#define __build_read_lock_ptr(rw, helper) \ + do { \ + asm volatile( \ + " mov (%0),d3 \n" \ + " sub 1,d3 \n" \ + " mov d3,(%0) \n" \ + " blt 1f \n" \ + " bra 2f \n" \ + "1: jmp 3f \n" \ + "2: \n" \ + " .section .text.lock,\"ax\" \n" \ + "3: call "helper"[],0 \n" \ + " jmp 2b \n" \ + " .previous" \ + : \ + : "d" (rw) \ + : "memory", "d3", "cc"); \ + } while (0) + +#define __build_read_lock_const(rw, helper) \ + do { \ + asm volatile( \ + " mov (%0),d3 \n" \ + " sub 1,d3 \n" \ + " mov d3,(%0) \n" \ + " blt 1f \n" \ + " bra 2f \n" \ + "1: jmp 3f \n" \ + "2: \n" \ + " .section .text.lock,\"ax\" \n" \ + "3: call "helper"[],0 \n" \ + " jmp 2b \n" \ + " .previous" \ + : \ + : "d" (rw) \ + : "memory", "d3", "cc"); \ + } while (0) + +#define __build_read_lock(rw, helper) \ + do { \ + if (__builtin_constant_p(rw)) \ + __build_read_lock_const(rw, helper); \ + else \ + __build_read_lock_ptr(rw, helper); \ + } while (0) + +#define __build_write_lock_ptr(rw, helper) \ + do { \ + asm volatile( \ + " mov (%0),d3 \n" \ + " sub 1,d3 \n" \ + " mov d3,(%0) \n" \ + " blt 1f \n" \ + " bra 2f \n" \ + "1: jmp 3f \n" \ + "2: \n" \ + " .section .text.lock,\"ax\" \n" \ + "3: call "helper"[],0 \n" \ + " jmp 2b \n" \ + " .previous" \ + : \ + : "d" (rw) \ + : "memory", "d3", "cc"); \ + } while (0) + +#define __build_write_lock_const(rw, helper) \ + do { \ + asm volatile( \ + " mov (%0),d3 \n" \ + " sub 1,d3 \n" \ + " mov d3,(%0) \n" \ + " blt 1f \n" \ + " bra 2f \n" \ + "1: jmp 3f \n" \ + "2: \n" \ + " .section .text.lock,\"ax\" \n" \ + "3: call "helper"[],0 \n" \ + " jmp 2b \n" \ + " .previous" \ + : \ + : "d" (rw) \ + : "memory", "d3", "cc"); \ + } while (0) + +#define __build_write_lock(rw, helper) \ + do { \ + if (__builtin_constant_p(rw)) \ + __build_write_lock_const(rw, helper); \ + else \ + __build_write_lock_ptr(rw, helper); \ + } while (0) + +#endif /* CONFIG_SMP */ +#endif /* _ASM_RWLOCK_H */ diff --git a/arch/mn10300/include/asm/serial-regs.h b/arch/mn10300/include/asm/serial-regs.h index 6498469e93ac..8320cda32f5a 100644 --- a/arch/mn10300/include/asm/serial-regs.h +++ b/arch/mn10300/include/asm/serial-regs.h @@ -20,18 +20,25 @@ /* serial port 0 */ #define SC0CTR __SYSREG(0xd4002000, u16) /* control reg */ #define SC01CTR_CK 0x0007 /* clock source select */ -#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */ #define SC01CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */ #define SC01CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */ +#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ +#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */ +#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3) +#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ #define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */ -#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 2 underflow (serial port 1 only) */ +#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 0 underflow (serial port 0 only) */ #define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */ +#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */ +#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */ +#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 1 only) */ #define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */ -#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ -#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */ +#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */ +#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ +#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 0 underflow (serial port 0 only) */ +#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */ +#define SC1CTR_CK_TM12UFLOW_8 0x0000 /* - 1/8 timer 12 underflow (serial port 1 only) */ +#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */ #define SC01CTR_STB 0x0008 /* stop bit select */ #define SC01CTR_STB_1BIT 0x0000 /* - 1 stop bit */ #define SC01CTR_STB_2BIT 0x0008 /* - 2 stop bits */ @@ -100,11 +107,23 @@ /* serial port 2 */ #define SC2CTR __SYSREG(0xd4002020, u16) /* control reg */ +#ifdef CONFIG_AM33_2 #define SC2CTR_CK 0x0003 /* clock source select */ #define SC2CTR_CK_TM10UFLOW 0x0000 /* - timer 10 underflow */ #define SC2CTR_CK_TM2UFLOW 0x0001 /* - timer 2 underflow */ #define SC2CTR_CK_EXTERN 0x0002 /* - external closk */ #define SC2CTR_CK_TM3UFLOW 0x0003 /* - timer 3 underflow */ +#else /* CONFIG_AM33_2 */ +#define SC2CTR_CK 0x0007 /* clock source select */ +#define SC2CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow */ +#define SC2CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */ +#define SC2CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */ +#define SC2CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow */ +#define SC2CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 1 underflow */ +#define SC2CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow */ +#define SC2CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ +#define SC2CTR_CK_EXTERN 0x0007 /* - external closk */ +#endif /* CONFIG_AM33_2 */ #define SC2CTR_STB 0x0008 /* stop bit select */ #define SC2CTR_STB_1BIT 0x0000 /* - 1 stop bit */ #define SC2CTR_STB_2BIT 0x0008 /* - 2 stop bits */ @@ -134,9 +153,14 @@ #define SC2ICR_RES 0x04 /* receive error select */ #define SC2ICR_RI 0x01 /* receive interrupt cause */ -#define SC2TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */ -#define SC2RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */ -#define SC2STR __SYSREG(0xd400201c, u8) /* status reg */ +#define SC2TXB __SYSREG(0xd4002028, u8) /* transmit buffer reg */ +#define SC2RXB __SYSREG(0xd4002029, u8) /* receive buffer reg */ + +#ifdef CONFIG_AM33_2 +#define SC2STR __SYSREG(0xd400202c, u8) /* status reg */ +#else /* CONFIG_AM33_2 */ +#define SC2STR __SYSREG(0xd400202c, u16) /* status reg */ +#endif /* CONFIG_AM33_2 */ #define SC2STR_OEF 0x0001 /* overrun error found */ #define SC2STR_PEF 0x0002 /* parity error found */ #define SC2STR_FEF 0x0004 /* framing error found */ @@ -146,10 +170,17 @@ #define SC2STR_RXF 0x0040 /* receive status */ #define SC2STR_TXF 0x0080 /* transmit status */ +#ifdef CONFIG_AM33_2 #define SC2TIM __SYSREG(0xd400202d, u8) /* status reg */ +#endif +#ifdef CONFIG_AM33_2 #define SC2RXIRQ 24 /* serial 2 Receive IRQ */ #define SC2TXIRQ 25 /* serial 2 Transmit IRQ */ +#else /* CONFIG_AM33_2 */ +#define SC2RXIRQ 68 /* serial 2 Receive IRQ */ +#define SC2TXIRQ 69 /* serial 2 Transmit IRQ */ +#endif /* CONFIG_AM33_2 */ #define SC2RXICR GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */ #define SC2TXICR GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */ diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h index a29445cddd6f..23a799293599 100644 --- a/arch/mn10300/include/asm/serial.h +++ b/arch/mn10300/include/asm/serial.h @@ -9,10 +9,8 @@ * 2 of the Licence, or (at your option) any later version. */ -/* - * The ASB2305 has an 18.432 MHz clock the UART - */ -#define BASE_BAUD (18432000 / 16) +#ifndef _ASM_SERIAL_H +#define _ASM_SERIAL_H /* Standard COM flags (except for COM4, because of the 8514 problem) */ #ifdef CONFIG_SERIAL_DETECT_IRQ @@ -34,3 +32,5 @@ #endif #include + +#endif /* _ASM_SERIAL_H */ diff --git a/arch/mn10300/include/asm/smp.h b/arch/mn10300/include/asm/smp.h index 4eb8c61b7dab..a3930e43a958 100644 --- a/arch/mn10300/include/asm/smp.h +++ b/arch/mn10300/include/asm/smp.h @@ -3,6 +3,16 @@ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 13-Nov-2006 MEI Define IPI-IRQ number and add inline/macro function + * for SMP support. + * 22-Jan-2007 MEI Add the define related to SMP_BOOT_IRQ. + * 23-Feb-2007 MEI Add the define related to SMP icahce invalidate. + * 23-Jun-2008 MEI Delete INTC_IPI. + * 22-Jul-2008 MEI Add smp_nmi_call_function and related defines. + * 04-Aug-2008 MEI Delete USE_DOIRQ_CACHE_IPI. + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public Licence * as published by the Free Software Foundation; either version @@ -11,8 +21,85 @@ #ifndef _ASM_SMP_H #define _ASM_SMP_H -#ifdef CONFIG_SMP -#error SMP not yet supported for MN10300 +#ifndef __ASSEMBLY__ +#include +#include #endif +#ifdef CONFIG_SMP +#include + +#define RESCHEDULE_IPI 63 +#define CALL_FUNC_SINGLE_IPI 192 +#define LOCAL_TIMER_IPI 193 +#define FLUSH_CACHE_IPI 194 +#define CALL_FUNCTION_NMI_IPI 195 +#define GDB_NMI_IPI 196 + +#define SMP_BOOT_IRQ 195 + +#define RESCHEDULE_GxICR_LV GxICR_LEVEL_6 +#define CALL_FUNCTION_GxICR_LV GxICR_LEVEL_4 +#define LOCAL_TIMER_GxICR_LV GxICR_LEVEL_4 +#define FLUSH_CACHE_GxICR_LV GxICR_LEVEL_0 +#define SMP_BOOT_GxICR_LV GxICR_LEVEL_0 + +#define TIME_OUT_COUNT_BOOT_IPI 100 +#define DELAY_TIME_BOOT_IPI 75000 + + +#ifndef __ASSEMBLY__ + +/** + * raw_smp_processor_id - Determine the raw CPU ID of the CPU running it + * + * What we really want to do is to use the CPUID hardware CPU register to get + * this information, but accesses to that aren't cached, and run at system bus + * speed, not CPU speed. A copy of this value is, however, stored in the + * thread_info struct, and that can be cached. + * + * An alternate way of dealing with this could be to use the EPSW.S bits to + * cache this information for systems with up to four CPUs. + */ +#if 0 +#define raw_smp_processor_id() (CPUID) +#else +#define raw_smp_processor_id() (current_thread_info()->cpu) #endif + +static inline int cpu_logical_map(int cpu) +{ + return cpu; +} + +static inline int cpu_number_map(int cpu) +{ + return cpu; +} + + +extern cpumask_t cpu_boot_map; + +extern void smp_init_cpus(void); +extern void smp_cache_interrupt(void); +extern void send_IPI_allbutself(int irq); +extern int smp_nmi_call_function(smp_call_func_t func, void *info, int wait); + +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); + +#ifdef CONFIG_HOTPLUG_CPU +extern int __cpu_disable(void); +extern void __cpu_die(unsigned int cpu); +#endif /* CONFIG_HOTPLUG_CPU */ + +#endif /* __ASSEMBLY__ */ +#else /* CONFIG_SMP */ +#ifndef __ASSEMBLY__ + +static inline void smp_init_cpus(void) {} + +#endif /* __ASSEMBLY__ */ +#endif /* CONFIG_SMP */ + +#endif /* _ASM_SMP_H */ diff --git a/arch/mn10300/include/asm/smsc911x.h b/arch/mn10300/include/asm/smsc911x.h new file mode 100644 index 000000000000..2fcd1080322b --- /dev/null +++ b/arch/mn10300/include/asm/smsc911x.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/spinlock.h b/arch/mn10300/include/asm/spinlock.h index 4bf9c8b169e0..93429154e898 100644 --- a/arch/mn10300/include/asm/spinlock.h +++ b/arch/mn10300/include/asm/spinlock.h @@ -11,6 +11,183 @@ #ifndef _ASM_SPINLOCK_H #define _ASM_SPINLOCK_H -#error SMP spinlocks not implemented for MN10300 +#include +#include +#include +/* + * Simple spin lock operations. There are two variants, one clears IRQ's + * on the local processor, one does not. + * + * We make no fairness assumptions. They have a cost. + */ + +#define arch_spin_is_locked(x) (*(volatile signed char *)(&(x)->slock) != 0) +#define arch_spin_unlock_wait(x) do { barrier(); } while (arch_spin_is_locked(x)) + +static inline void arch_spin_unlock(arch_spinlock_t *lock) +{ + asm volatile( + " bclr 1,(0,%0) \n" + : + : "a"(&lock->slock) + : "memory", "cc"); +} + +static inline int arch_spin_trylock(arch_spinlock_t *lock) +{ + int ret; + + asm volatile( + " mov 1,%0 \n" + " bset %0,(%1) \n" + " bne 1f \n" + " clr %0 \n" + "1: xor 1,%0 \n" + : "=d"(ret) + : "a"(&lock->slock) + : "memory", "cc"); + + return ret; +} + +static inline void arch_spin_lock(arch_spinlock_t *lock) +{ + asm volatile( + "1: bset 1,(0,%0) \n" + " bne 1b \n" + : + : "a"(&lock->slock) + : "memory", "cc"); +} + +static inline void arch_spin_lock_flags(arch_spinlock_t *lock, + unsigned long flags) +{ + int temp; + + asm volatile( + "1: bset 1,(0,%2) \n" + " beq 3f \n" + " mov %1,epsw \n" + "2: mov (0,%2),%0 \n" + " or %0,%0 \n" + " bne 2b \n" + " mov %3,%0 \n" + " mov %0,epsw \n" + " nop \n" + " nop \n" + " bra 1b\n" + "3: \n" + : "=&d" (temp) + : "d" (flags), "a"(&lock->slock), "i"(EPSW_IE | MN10300_CLI_LEVEL) + : "memory", "cc"); +} + +#ifdef __KERNEL__ + +/* + * Read-write spinlocks, allowing multiple readers + * but only one writer. + * + * NOTE! it is quite common to have readers in interrupts + * but no interrupt writers. For those circumstances we + * can "mix" irq-safe locks - any writer needs to get a + * irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + */ + +/** + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ +#define arch_read_can_lock(x) ((int)(x)->lock > 0) + +/** + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ +#define arch_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS) + +/* + * On mn10300, we implement read-write locks as a 32-bit counter + * with the high bit (sign) being the "contended" bit. + */ +static inline void arch_read_lock(arch_rwlock_t *rw) +{ +#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + __build_read_lock(rw, "__read_lock_failed"); +#else + { + atomic_t *count = (atomic_t *)rw; + while (atomic_dec_return(count) < 0) + atomic_inc(count); + } +#endif +} + +static inline void arch_write_lock(arch_rwlock_t *rw) +{ +#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + __build_write_lock(rw, "__write_lock_failed"); +#else + { + atomic_t *count = (atomic_t *)rw; + while (!atomic_sub_and_test(RW_LOCK_BIAS, count)) + atomic_add(RW_LOCK_BIAS, count); + } +#endif +} + +static inline void arch_read_unlock(arch_rwlock_t *rw) +{ +#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + __build_read_unlock(rw); +#else + { + atomic_t *count = (atomic_t *)rw; + atomic_inc(count); + } +#endif +} + +static inline void arch_write_unlock(arch_rwlock_t *rw) +{ +#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + __build_write_unlock(rw); +#else + { + atomic_t *count = (atomic_t *)rw; + atomic_add(RW_LOCK_BIAS, count); + } +#endif +} + +static inline int arch_read_trylock(arch_rwlock_t *lock) +{ + atomic_t *count = (atomic_t *)lock; + atomic_dec(count); + if (atomic_read(count) >= 0) + return 1; + atomic_inc(count); + return 0; +} + +static inline int arch_write_trylock(arch_rwlock_t *lock) +{ + atomic_t *count = (atomic_t *)lock; + if (atomic_sub_and_test(RW_LOCK_BIAS, count)) + return 1; + atomic_add(RW_LOCK_BIAS, count); + return 0; +} + +#define arch_read_lock_flags(lock, flags) arch_read_lock(lock) +#define arch_write_lock_flags(lock, flags) arch_write_lock(lock) + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* __KERNEL__ */ #endif /* _ASM_SPINLOCK_H */ diff --git a/arch/mn10300/include/asm/spinlock_types.h b/arch/mn10300/include/asm/spinlock_types.h new file mode 100644 index 000000000000..653dc519b405 --- /dev/null +++ b/arch/mn10300/include/asm/spinlock_types.h @@ -0,0 +1,20 @@ +#ifndef _ASM_SPINLOCK_TYPES_H +#define _ASM_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct arch_spinlock { + unsigned int slock; +} arch_spinlock_t; + +#define __ARCH_SPIN_LOCK_UNLOCKED { 0 } + +typedef struct { + unsigned int lock; +} arch_rwlock_t; + +#define __ARCH_RW_LOCK_UNLOCKED { RW_LOCK_BIAS } + +#endif /* _ASM_SPINLOCK_TYPES_H */ diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h index 9f7c7e17c01e..8ff3e5aaca41 100644 --- a/arch/mn10300/include/asm/system.h +++ b/arch/mn10300/include/asm/system.h @@ -12,12 +12,29 @@ #define _ASM_SYSTEM_H #include +#include #ifdef __KERNEL__ #ifndef __ASSEMBLY__ #include #include +#include + +#if !defined(CONFIG_LAZY_SAVE_FPU) +struct fpu_state_struct; +extern asmlinkage void fpu_save(struct fpu_state_struct *); +#define switch_fpu(prev, next) \ + do { \ + if ((prev)->thread.fpu_flags & THREAD_HAS_FPU) { \ + (prev)->thread.fpu_flags &= ~THREAD_HAS_FPU; \ + (prev)->thread.uregs->epsw &= ~EPSW_FE; \ + fpu_save(&(prev)->thread.fpu_state); \ + } \ + } while (0) +#else +#define switch_fpu(prev, next) do {} while (0) +#endif struct task_struct; struct thread_struct; @@ -30,6 +47,7 @@ struct task_struct *__switch_to(struct thread_struct *prev, /* context switching is now performed out-of-line in switch_to.S */ #define switch_to(prev, next, last) \ do { \ + switch_fpu(prev, next); \ current->thread.wchan = (u_long) __builtin_return_address(0); \ (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \ mb(); \ @@ -40,8 +58,6 @@ do { \ #define nop() asm volatile ("nop") -#endif /* !__ASSEMBLY__ */ - /* * Force strict CPU ordering. * And yes, this is required on UP too when we're talking @@ -68,64 +84,19 @@ do { \ #define smp_mb() mb() #define smp_rmb() rmb() #define smp_wmb() wmb() -#else +#define set_mb(var, value) do { xchg(&var, value); } while (0) +#else /* CONFIG_SMP */ #define smp_mb() barrier() #define smp_rmb() barrier() #define smp_wmb() barrier() -#endif - #define set_mb(var, value) do { var = value; mb(); } while (0) +#endif /* CONFIG_SMP */ + #define set_wmb(var, value) do { var = value; wmb(); } while (0) #define read_barrier_depends() do {} while (0) #define smp_read_barrier_depends() do {} while (0) -/*****************************************************************************/ -/* - * MN10300 doesn't actually have an exchange instruction - */ -#ifndef __ASSEMBLY__ - -struct __xchg_dummy { unsigned long a[100]; }; -#define __xg(x) ((struct __xchg_dummy *)(x)) - -static inline -unsigned long __xchg(volatile unsigned long *m, unsigned long val) -{ - unsigned long retval; - unsigned long flags; - - local_irq_save(flags); - retval = *m; - *m = val; - local_irq_restore(flags); - return retval; -} - -#define xchg(ptr, v) \ - ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \ - (unsigned long)(v))) - -static inline unsigned long __cmpxchg(volatile unsigned long *m, - unsigned long old, unsigned long new) -{ - unsigned long retval; - unsigned long flags; - - local_irq_save(flags); - retval = *m; - if (retval == old) - *m = new; - local_irq_restore(flags); - return retval; -} - -#define cmpxchg(ptr, o, n) \ - ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \ - (unsigned long)(o), \ - (unsigned long)(n))) - #endif /* !__ASSEMBLY__ */ - #endif /* __KERNEL__ */ #endif /* _ASM_SYSTEM_H */ diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h index 2001cb657a95..aa07a4a5d794 100644 --- a/arch/mn10300/include/asm/thread_info.h +++ b/arch/mn10300/include/asm/thread_info.h @@ -16,10 +16,6 @@ #include -#ifndef __ASSEMBLY__ -#include -#endif - #define PREEMPT_ACTIVE 0x10000000 #ifdef CONFIG_4KSTACKS @@ -38,10 +34,14 @@ * must also be changed */ #ifndef __ASSEMBLY__ +typedef struct { + unsigned long seg; +} mm_segment_t; struct thread_info { struct task_struct *task; /* main task structure */ struct exec_domain *exec_domain; /* execution domain */ + struct pt_regs *frame; /* current exception frame */ unsigned long flags; /* low level flags */ __u32 cpu; /* current CPU */ __s32 preempt_count; /* 0 => preemptable, <0 => BUG */ @@ -55,6 +55,10 @@ struct thread_info { __u8 supervisor_stack[0]; }; +#define thread_info_to_uregs(ti) \ + ((struct pt_regs *) \ + ((unsigned long)ti + THREAD_SIZE - sizeof(struct pt_regs))) + #else /* !__ASSEMBLY__ */ #ifndef __ASM_OFFSETS_H__ @@ -102,6 +106,12 @@ struct thread_info *current_thread_info(void) return ti; } +static inline __attribute__((const)) +struct pt_regs *current_frame(void) +{ + return current_thread_info()->frame; +} + /* how to get the current stack pointer from C */ static inline unsigned long current_stack_pointer(void) { diff --git a/arch/mn10300/include/asm/timer-regs.h b/arch/mn10300/include/asm/timer-regs.h index 1d883b7f94ab..c634977caf66 100644 --- a/arch/mn10300/include/asm/timer-regs.h +++ b/arch/mn10300/include/asm/timer-regs.h @@ -17,21 +17,27 @@ #ifdef __KERNEL__ -/* timer prescalar control */ +/* + * Timer prescalar control + */ #define TMPSCNT __SYSREG(0xd4003071, u8) /* timer prescaler control */ #define TMPSCNT_ENABLE 0x80 /* timer prescaler enable */ #define TMPSCNT_DISABLE 0x00 /* timer prescaler disable */ -/* 8 bit timers */ +/* + * 8-bit timers + */ #define TM0MD __SYSREG(0xd4003000, u8) /* timer 0 mode register */ #define TM0MD_SRC 0x07 /* timer source */ #define TM0MD_SRC_IOCLK 0x00 /* - IOCLK */ #define TM0MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ #define TM0MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */ #define TM0MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM0MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) +#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */ #define TM0MD_SRC_TM0IO 0x07 /* - TM0IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM0MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM0MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -43,7 +49,9 @@ #define TM1MD_SRC_TM0CASCADE 0x03 /* - cascade with timer 0 */ #define TM1MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM1MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM1MD_SRC_TM1IO 0x07 /* - TM1IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM1MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM1MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -55,7 +63,9 @@ #define TM2MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 1 */ #define TM2MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM2MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#if defined(CONFIG_AM33_2) #define TM2MD_SRC_TM2IO 0x07 /* - TM2IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM2MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM2MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -64,11 +74,13 @@ #define TM3MD_SRC_IOCLK 0x00 /* - IOCLK */ #define TM3MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ #define TM3MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM3MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 2 */ +#define TM3MD_SRC_TM2CASCADE 0x03 /* - cascade with timer 2 */ #define TM3MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM3MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM3MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM3MD_SRC_TM3IO 0x07 /* - TM3IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM3MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM3MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -96,7 +108,9 @@ #define TM2ICR GxICR(TM2IRQ) /* timer 2 uflow intr ctrl reg */ #define TM3ICR GxICR(TM3IRQ) /* timer 3 uflow intr ctrl reg */ -/* 16-bit timers 4,5 & 7-11 */ +/* + * 16-bit timers 4,5 & 7-15 + */ #define TM4MD __SYSREG(0xd4003080, u8) /* timer 4 mode register */ #define TM4MD_SRC 0x07 /* timer source */ #define TM4MD_SRC_IOCLK 0x00 /* - IOCLK */ @@ -105,7 +119,9 @@ #define TM4MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM4MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM4MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM4MD_SRC_TM4IO 0x07 /* - TM4IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM4MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM4MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -118,7 +134,11 @@ #define TM5MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM5MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM5MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM5MD_SRC_TM5IO 0x07 /* - TM5IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM5MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM5MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM5MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -130,7 +150,9 @@ #define TM7MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM7MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM7MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM7MD_SRC_TM7IO 0x07 /* - TM7IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM7MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM7MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -143,7 +165,11 @@ #define TM8MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM8MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM8MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM8MD_SRC_TM8IO 0x07 /* - TM8IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM8MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM8MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM8MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -156,7 +182,11 @@ #define TM9MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM9MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM9MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM9MD_SRC_TM9IO 0x07 /* - TM9IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM9MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM9MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM9MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -169,7 +199,11 @@ #define TM10MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM10MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM10MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM10MD_SRC_TM10IO 0x07 /* - TM10IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM10MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM10MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM10MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -178,32 +212,101 @@ #define TM11MD_SRC_IOCLK 0x00 /* - IOCLK */ #define TM11MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ #define TM11MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM11MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */ #define TM11MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM11MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM11MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM11MD_SRC_TM11IO 0x07 /* - TM11IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM11MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM11MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM11MD_COUNT_ENABLE 0x80 /* timer count enable */ +#if defined(CONFIG_AM34_2) +#define TM12MD __SYSREG(0xd4003180, u8) /* timer 11 mode register */ +#define TM12MD_SRC 0x07 /* timer source */ +#define TM12MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM12MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM12MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM12MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM12MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM12MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM12MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#define TM12MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM12MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM13MD __SYSREG(0xd4003182, u8) /* timer 11 mode register */ +#define TM13MD_SRC 0x07 /* timer source */ +#define TM13MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM13MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM13MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM13MD_SRC_TM12CASCADE 0x03 /* - cascade with timer 12 */ +#define TM13MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM13MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM13MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM13MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#define TM13MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM13MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM14MD __SYSREG(0xd4003184, u8) /* timer 11 mode register */ +#define TM14MD_SRC 0x07 /* timer source */ +#define TM14MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM14MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM14MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM14MD_SRC_TM13CASCADE 0x03 /* - cascade with timer 13 */ +#define TM14MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM14MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM14MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM14MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#define TM14MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM14MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM15MD __SYSREG(0xd4003186, u8) /* timer 11 mode register */ +#define TM15MD_SRC 0x07 /* timer source */ +#define TM15MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM15MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM15MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM15MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM15MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM15MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM15MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#define TM15MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM15MD_COUNT_ENABLE 0x80 /* timer count enable */ +#endif /* CONFIG_AM34_2 */ + + #define TM4BR __SYSREG(0xd4003090, u16) /* timer 4 base register */ #define TM5BR __SYSREG(0xd4003092, u16) /* timer 5 base register */ +#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */ #define TM7BR __SYSREG(0xd4003096, u16) /* timer 7 base register */ #define TM8BR __SYSREG(0xd4003098, u16) /* timer 8 base register */ #define TM9BR __SYSREG(0xd400309a, u16) /* timer 9 base register */ +#define TM89BR __SYSREG(0xd4003098, u32) /* timer 8:9 base register */ #define TM10BR __SYSREG(0xd400309c, u16) /* timer 10 base register */ #define TM11BR __SYSREG(0xd400309e, u16) /* timer 11 base register */ -#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */ +#if defined(CONFIG_AM34_2) +#define TM12BR __SYSREG(0xd4003190, u16) /* timer 12 base register */ +#define TM13BR __SYSREG(0xd4003192, u16) /* timer 13 base register */ +#define TM14BR __SYSREG(0xd4003194, u16) /* timer 14 base register */ +#define TM15BR __SYSREG(0xd4003196, u16) /* timer 15 base register */ +#endif /* CONFIG_AM34_2 */ #define TM4BC __SYSREG(0xd40030a0, u16) /* timer 4 binary counter */ #define TM5BC __SYSREG(0xd40030a2, u16) /* timer 5 binary counter */ #define TM45BC __SYSREG(0xd40030a0, u32) /* timer 4:5 binary counter */ - #define TM7BC __SYSREG(0xd40030a6, u16) /* timer 7 binary counter */ #define TM8BC __SYSREG(0xd40030a8, u16) /* timer 8 binary counter */ #define TM9BC __SYSREG(0xd40030aa, u16) /* timer 9 binary counter */ +#define TM89BC __SYSREG(0xd40030a8, u32) /* timer 8:9 binary counter */ #define TM10BC __SYSREG(0xd40030ac, u16) /* timer 10 binary counter */ #define TM11BC __SYSREG(0xd40030ae, u16) /* timer 11 binary counter */ +#if defined(CONFIG_AM34_2) +#define TM12BC __SYSREG(0xd40031a0, u16) /* timer 12 binary counter */ +#define TM13BC __SYSREG(0xd40031a2, u16) /* timer 13 binary counter */ +#define TM14BC __SYSREG(0xd40031a4, u16) /* timer 14 binary counter */ +#define TM15BC __SYSREG(0xd40031a6, u16) /* timer 15 binary counter */ +#endif /* CONFIG_AM34_2 */ #define TM4IRQ 6 /* timer 4 IRQ */ #define TM5IRQ 7 /* timer 5 IRQ */ @@ -212,6 +315,12 @@ #define TM9IRQ 13 /* timer 9 IRQ */ #define TM10IRQ 14 /* timer 10 IRQ */ #define TM11IRQ 15 /* timer 11 IRQ */ +#if defined(CONFIG_AM34_2) +#define TM12IRQ 64 /* timer 12 IRQ */ +#define TM13IRQ 65 /* timer 13 IRQ */ +#define TM14IRQ 66 /* timer 14 IRQ */ +#define TM15IRQ 67 /* timer 15 IRQ */ +#endif /* CONFIG_AM34_2 */ #define TM4ICR GxICR(TM4IRQ) /* timer 4 uflow intr ctrl reg */ #define TM5ICR GxICR(TM5IRQ) /* timer 5 uflow intr ctrl reg */ @@ -220,8 +329,16 @@ #define TM9ICR GxICR(TM9IRQ) /* timer 9 uflow intr ctrl reg */ #define TM10ICR GxICR(TM10IRQ) /* timer 10 uflow intr ctrl reg */ #define TM11ICR GxICR(TM11IRQ) /* timer 11 uflow intr ctrl reg */ - -/* 16-bit timer 6 */ +#if defined(CONFIG_AM34_2) +#define TM12ICR GxICR(TM12IRQ) /* timer 12 uflow intr ctrl reg */ +#define TM13ICR GxICR(TM13IRQ) /* timer 13 uflow intr ctrl reg */ +#define TM14ICR GxICR(TM14IRQ) /* timer 14 uflow intr ctrl reg */ +#define TM15ICR GxICR(TM15IRQ) /* timer 15 uflow intr ctrl reg */ +#endif /* CONFIG_AM34_2 */ + +/* + * 16-bit timer 6 + */ #define TM6MD __SYSREG(0xd4003084, u16) /* timer6 mode register */ #define TM6MD_SRC 0x0007 /* timer source */ #define TM6MD_SRC_IOCLK 0x0000 /* - IOCLK */ @@ -229,10 +346,14 @@ #define TM6MD_SRC_IOCLK_32 0x0002 /* - 1/32 IOCLK */ #define TM6MD_SRC_TM0UFLOW 0x0004 /* - timer 0 underflow */ #define TM6MD_SRC_TM1UFLOW 0x0005 /* - timer 1 underflow */ -#define TM6MD_SRC_TM6IOB_BOTH 0x0006 /* - TM6IOB pin input (both edges) */ +#define TM6MD_SRC_TM2UFLOW 0x0006 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) +/* #define TM6MD_SRC_TM6IOB_BOTH 0x0006 */ /* - TM6IOB pin input (both edges) */ #define TM6MD_SRC_TM6IOB_SINGLE 0x0007 /* - TM6IOB pin input (single edge) */ -#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */ +#endif /* CONFIG_AM33_2 */ #define TM6MD_ONESHOT_ENABLE 0x0040 /* oneshot count */ +#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */ +#if defined(CONFIG_AM33_2) #define TM6MD_TRIG_ENABLE 0x0080 /* TM6IOB pin trigger enable */ #define TM6MD_PWM 0x3800 /* PWM output mode */ #define TM6MD_PWM_DIS 0x0000 /* - disabled */ @@ -240,10 +361,15 @@ #define TM6MD_PWM_11BIT 0x1800 /* - 11 bits mode */ #define TM6MD_PWM_12BIT 0x3000 /* - 12 bits mode */ #define TM6MD_PWM_14BIT 0x3800 /* - 14 bits mode */ +#endif /* CONFIG_AM33_2 */ + #define TM6MD_INIT_COUNTER 0x4000 /* initialize TMnBC to zero */ #define TM6MD_COUNT_ENABLE 0x8000 /* timer count enable */ #define TM6MDA __SYSREG(0xd40030b4, u8) /* timer6 cmp/cap A mode reg */ +#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ +#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ +#if defined(CONFIG_AM33_2) #define TM6MDA_OUT 0x07 /* output select */ #define TM6MDA_OUT_SETA_RESETB 0x00 /* - set at match A, reset at match B */ #define TM6MDA_OUT_SETA_RESETOV 0x01 /* - set at match A, reset at overflow */ @@ -251,30 +377,35 @@ #define TM6MDA_OUT_RESETA 0x03 /* - reset at match A */ #define TM6MDA_OUT_TOGGLE 0x04 /* - toggle on match A */ #define TM6MDA_MODE 0xc0 /* compare A register mode */ -#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ -#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ #define TM6MDA_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ #define TM6MDA_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ #define TM6MDA_EDGE 0x20 /* compare A edge select */ #define TM6MDA_EDGE_FALLING 0x00 /* capture on falling edge */ #define TM6MDA_EDGE_RISING 0x20 /* capture on rising edge */ #define TM6MDA_CAPTURE_ENABLE 0x10 /* capture enable */ +#else /* !CONFIG_AM33_2 */ +#define TM6MDA_MODE 0x40 /* compare A register mode */ +#endif /* CONFIG_AM33_2 */ #define TM6MDB __SYSREG(0xd40030b5, u8) /* timer6 cmp/cap B mode reg */ +#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ +#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ +#if defined(CONFIG_AM33_2) #define TM6MDB_OUT 0x07 /* output select */ #define TM6MDB_OUT_SETB_RESETA 0x00 /* - set at match B, reset at match A */ #define TM6MDB_OUT_SETB_RESETOV 0x01 /* - set at match B */ #define TM6MDB_OUT_RESETB 0x03 /* - reset at match B */ #define TM6MDB_OUT_TOGGLE 0x04 /* - toggle on match B */ #define TM6MDB_MODE 0xc0 /* compare B register mode */ -#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ -#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ #define TM6MDB_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ #define TM6MDB_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ #define TM6MDB_EDGE 0x20 /* compare B edge select */ #define TM6MDB_EDGE_FALLING 0x00 /* capture on falling edge */ #define TM6MDB_EDGE_RISING 0x20 /* capture on rising edge */ #define TM6MDB_CAPTURE_ENABLE 0x10 /* capture enable */ +#else /* !CONFIG_AM33_2 */ +#define TM6MDB_MODE 0x40 /* compare B register mode */ +#endif /* CONFIG_AM33_2 */ #define TM6CA __SYSREG(0xd40030c4, u16) /* timer6 cmp/capture reg A */ #define TM6CB __SYSREG(0xd40030d4, u16) /* timer6 cmp/capture reg B */ @@ -288,6 +419,34 @@ #define TM6AICR GxICR(TM6AIRQ) /* timer 6A intr control reg */ #define TM6BICR GxICR(TM6BIRQ) /* timer 6B intr control reg */ +#if defined(CONFIG_AM34_2) +/* + * MTM: OS Tick-Timer + */ +#define TMTMD __SYSREG(0xd4004100, u8) /* Tick Timer mode register */ +#define TMTMD_TMTLDE 0x40 /* initialize TMTBC = TMTBR */ +#define TMTMD_TMTCNE 0x80 /* timer count enable */ + +#define TMTBR __SYSREG(0xd4004110, u32) /* Tick Timer mode reg */ +#define TMTBC __SYSREG(0xd4004120, u32) /* Tick Timer mode reg */ + +/* + * MTM: OS Timestamp-Timer + */ +#define TMSMD __SYSREG(0xd4004140, u8) /* Tick Timer mode register */ +#define TMSMD_TMSLDE 0x40 /* initialize TMSBC = TMSBR */ +#define TMSMD_TMSCNE 0x80 /* timer count enable */ + +#define TMSBR __SYSREG(0xd4004150, u32) /* Tick Timer mode register */ +#define TMSBC __SYSREG(0xd4004160, u32) /* Tick Timer mode register */ + +#define TMTIRQ 119 /* OS Tick timer IRQ */ +#define TMSIRQ 120 /* Timestamp timer IRQ */ + +#define TMTICR GxICR(TMTIRQ) /* OS Tick timer uflow intr ctrl reg */ +#define TMSICR GxICR(TMSIRQ) /* Timestamp timer uflow intr ctrl reg */ +#endif /* CONFIG_AM34_2 */ + #endif /* __KERNEL__ */ #endif /* _ASM_TIMER_REGS_H */ diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h index 8d031f9e117d..bd4e90dfe6c2 100644 --- a/arch/mn10300/include/asm/timex.h +++ b/arch/mn10300/include/asm/timex.h @@ -16,18 +16,30 @@ #define TICK_SIZE (tick_nsec / 1000) -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set - * to something appropriate, but what? */ - -extern cycles_t cacheflush_time; +#define CLOCK_TICK_RATE MN10300_JCCLK /* Underlying HZ */ #ifdef __KERNEL__ +extern cycles_t cacheflush_time; + static inline cycles_t get_cycles(void) { return read_timestamp_counter(); } +extern int init_clockevents(void); +extern int init_clocksource(void); + +static inline void setup_jiffies_interrupt(int irq, + struct irqaction *action) +{ + u16 tmp; + setup_irq(irq, action); + set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL)); + GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; + tmp = GxICR(irq); +} + #endif /* __KERNEL__ */ #endif /* _ASM_TIMEX_H */ diff --git a/arch/mn10300/include/asm/tlbflush.h b/arch/mn10300/include/asm/tlbflush.h index 1a7e29281c5d..efddd6e1adea 100644 --- a/arch/mn10300/include/asm/tlbflush.h +++ b/arch/mn10300/include/asm/tlbflush.h @@ -11,24 +11,78 @@ #ifndef _ASM_TLBFLUSH_H #define _ASM_TLBFLUSH_H +#include #include -#define __flush_tlb() \ -do { \ - int w; \ - __asm__ __volatile__ \ - (" mov %1,%0 \n" \ - " or %2,%0 \n" \ - " mov %0,%1 \n" \ - : "=d"(w) \ - : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) \ - : "cc", "memory" \ - ); \ -} while (0) +struct tlb_state { + struct mm_struct *active_mm; + int state; +}; +DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate); -#define __flush_tlb_all() __flush_tlb() -#define __flush_tlb_one(addr) __flush_tlb() +/** + * local_flush_tlb - Flush the current MM's entries from the local CPU's TLBs + */ +static inline void local_flush_tlb(void) +{ + int w; + asm volatile( + " mov %1,%0 \n" + " or %2,%0 \n" + " mov %0,%1 \n" + : "=d"(w) + : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) + : "cc", "memory"); +} + +/** + * local_flush_tlb_all - Flush all entries from the local CPU's TLBs + */ +static inline void local_flush_tlb_all(void) +{ + local_flush_tlb(); +} +/** + * local_flush_tlb_one - Flush one entry from the local CPU's TLBs + */ +static inline void local_flush_tlb_one(unsigned long addr) +{ + local_flush_tlb(); +} + +/** + * local_flush_tlb_page - Flush a page's entry from the local CPU's TLBs + * @mm: The MM to flush for + * @addr: The address of the target page in RAM (not its page struct) + */ +static inline +void local_flush_tlb_page(struct mm_struct *mm, unsigned long addr) +{ + unsigned long pteu, flags, cnx; + + addr &= PAGE_MASK; + + local_irq_save(flags); + + cnx = 1; +#ifdef CONFIG_MN10300_TLB_USE_PIDR + cnx = mm->context.tlbpid[smp_processor_id()]; +#endif + if (cnx) { + pteu = addr; +#ifdef CONFIG_MN10300_TLB_USE_PIDR + pteu |= cnx & xPTEU_PID; +#endif + IPTEU = pteu; + DPTEU = pteu; + if (IPTEL & xPTEL_V) + IPTEL = 0; + if (DPTEL & xPTEL_V) + DPTEL = 0; + } + local_irq_restore(flags); +} /* * TLB flushing: @@ -40,41 +94,61 @@ do { \ * - flush_tlb_range(mm, start, end) flushes a range of pages * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables */ -#define flush_tlb_all() \ -do { \ - preempt_disable(); \ - __flush_tlb_all(); \ - preempt_enable(); \ -} while (0) - -#define flush_tlb_mm(mm) \ -do { \ - preempt_disable(); \ - __flush_tlb_all(); \ - preempt_enable(); \ -} while (0) - -#define flush_tlb_range(vma, start, end) \ -do { \ - unsigned long __s __attribute__((unused)) = (start); \ - unsigned long __e __attribute__((unused)) = (end); \ - preempt_disable(); \ - __flush_tlb_all(); \ - preempt_enable(); \ -} while (0) - - -#define __flush_tlb_global() flush_tlb_all() -#define flush_tlb() flush_tlb_all() -#define flush_tlb_kernel_range(start, end) \ -do { \ - unsigned long __s __attribute__((unused)) = (start); \ - unsigned long __e __attribute__((unused)) = (end); \ - flush_tlb_all(); \ -} while (0) - -extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr); - -#define flush_tlb_pgtables(mm, start, end) do {} while (0) +#ifdef CONFIG_SMP + +#include + +extern void flush_tlb_all(void); +extern void flush_tlb_current_task(void); +extern void flush_tlb_mm(struct mm_struct *); +extern void flush_tlb_page(struct vm_area_struct *, unsigned long); + +#define flush_tlb() flush_tlb_current_task() + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + flush_tlb_mm(vma->vm_mm); +} + +#else /* CONFIG_SMP */ + +static inline void flush_tlb_all(void) +{ + preempt_disable(); + local_flush_tlb_all(); + preempt_enable(); +} + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + preempt_disable(); + local_flush_tlb_all(); + preempt_enable(); +} + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + preempt_disable(); + local_flush_tlb_all(); + preempt_enable(); +} + +#define flush_tlb_page(vma, addr) local_flush_tlb_page((vma)->vm_mm, addr) +#define flush_tlb() flush_tlb_all() + +#endif /* CONFIG_SMP */ + +static inline void flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ + flush_tlb_all(); +} + +static inline void flush_tlb_pgtables(struct mm_struct *mm, + unsigned long start, unsigned long end) +{ +} #endif /* _ASM_TLBFLUSH_H */ diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h index 197a7af3dd8a..679dee0bbd08 100644 --- a/arch/mn10300/include/asm/uaccess.h +++ b/arch/mn10300/include/asm/uaccess.h @@ -14,9 +14,8 @@ /* * User space memory access functions */ -#include +#include #include -#include #include #define VERIFY_READ 0 @@ -29,7 +28,6 @@ * * For historical reasons, these macros are grossly misnamed. */ - #define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) #define KERNEL_XDS MAKE_MM_SEG(0xBFFFFFFF) @@ -377,7 +375,7 @@ unsigned long __generic_copy_to_user_nocheck(void *to, const void *from, #if 0 -#error don't use - these macros don't increment to & from pointers +#error "don't use - these macros don't increment to & from pointers" /* Optimize just a little bit when we know the size of the move. */ #define __constant_copy_user(to, from, size) \ do { \ diff --git a/arch/mn10300/kernel/Makefile b/arch/mn10300/kernel/Makefile index 23f2ab67574c..8f5f1e81baf5 100644 --- a/arch/mn10300/kernel/Makefile +++ b/arch/mn10300/kernel/Makefile @@ -3,13 +3,16 @@ # extra-y := head.o init_task.o vmlinux.lds -obj-y := process.o signal.o entry.o fpu.o traps.o irq.o \ +fpu-obj-y := fpu-nofpu.o fpu-nofpu-low.o +fpu-obj-$(CONFIG_FPU) := fpu.o fpu-low.o + +obj-y := process.o signal.o entry.o traps.o irq.o \ ptrace.o setup.o time.o sys_mn10300.o io.o kthread.o \ - switch_to.o mn10300_ksyms.o kernel_execve.o + switch_to.o mn10300_ksyms.o kernel_execve.o $(fpu-obj-y) -obj-$(CONFIG_MN10300_WD_TIMER) += mn10300-watchdog.o mn10300-watchdog-low.o +obj-$(CONFIG_SMP) += smp.o smp-low.o -obj-$(CONFIG_FPU) += fpu-low.o +obj-$(CONFIG_MN10300_WD_TIMER) += mn10300-watchdog.o mn10300-watchdog-low.o obj-$(CONFIG_MN10300_TTYSM) += mn10300-serial.o mn10300-serial-low.o \ mn10300-debug.o @@ -17,7 +20,7 @@ obj-$(CONFIG_GDBSTUB) += gdb-stub.o gdb-low.o obj-$(CONFIG_GDBSTUB_ON_TTYSx) += gdb-io-serial.o gdb-io-serial-low.o obj-$(CONFIG_GDBSTUB_ON_TTYSMx) += gdb-io-ttysm.o gdb-io-ttysm-low.o -ifneq ($(CONFIG_MN10300_CACHE_DISABLED),y) +ifeq ($(CONFIG_MN10300_CACHE_ENABLED),y) obj-$(CONFIG_GDBSTUB) += gdb-cache.o endif @@ -25,3 +28,5 @@ obj-$(CONFIG_MN10300_RTC) += rtc.o obj-$(CONFIG_PROFILE) += profile.o profile-low.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_KPROBES) += kprobes.o +obj-$(CONFIG_CSRC_MN10300) += csrc-mn10300.o +obj-$(CONFIG_CEVT_MN10300) += cevt-mn10300.o diff --git a/arch/mn10300/kernel/asm-offsets.c b/arch/mn10300/kernel/asm-offsets.c index 02dc7e461fef..96f24fab7de6 100644 --- a/arch/mn10300/kernel/asm-offsets.c +++ b/arch/mn10300/kernel/asm-offsets.c @@ -23,6 +23,7 @@ void foo(void) OFFSET(TI_task, thread_info, task); OFFSET(TI_exec_domain, thread_info, exec_domain); + OFFSET(TI_frame, thread_info, frame); OFFSET(TI_flags, thread_info, flags); OFFSET(TI_cpu, thread_info, cpu); OFFSET(TI_preempt_count, thread_info, preempt_count); @@ -66,7 +67,15 @@ void foo(void) OFFSET(THREAD_SP, thread_struct, sp); OFFSET(THREAD_A3, thread_struct, a3); OFFSET(THREAD_USP, thread_struct, usp); - OFFSET(THREAD_FRAME, thread_struct, __frame); +#ifdef CONFIG_FPU + OFFSET(THREAD_FPU_FLAGS, thread_struct, fpu_flags); + OFFSET(THREAD_FPU_STATE, thread_struct, fpu_state); + DEFINE(__THREAD_USING_FPU, THREAD_USING_FPU); + DEFINE(__THREAD_HAS_FPU, THREAD_HAS_FPU); +#endif /* CONFIG_FPU */ + BLANK(); + + OFFSET(TASK_THREAD, task_struct, thread); BLANK(); DEFINE(CLONE_VM_asm, CLONE_VM); diff --git a/arch/mn10300/kernel/cevt-mn10300.c b/arch/mn10300/kernel/cevt-mn10300.c new file mode 100644 index 000000000000..d4cb535bf786 --- /dev/null +++ b/arch/mn10300/kernel/cevt-mn10300.c @@ -0,0 +1,131 @@ +/* MN10300 clockevents + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by Mark Salter (msalter@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include "internal.h" + +#ifdef CONFIG_SMP +#if (CONFIG_NR_CPUS > 2) && !defined(CONFIG_GEENERIC_CLOCKEVENTS_BROADCAST) +#error "This doesn't scale well! Need per-core local timers." +#endif +#else /* CONFIG_SMP */ +#define stop_jiffies_counter1() +#define reload_jiffies_counter1(x) +#define TMJC1IRQ TMJCIRQ +#endif + + +static int next_event(unsigned long delta, + struct clock_event_device *evt) +{ + unsigned int cpu = smp_processor_id(); + + if (cpu == 0) { + stop_jiffies_counter(); + reload_jiffies_counter(delta - 1); + } else { + stop_jiffies_counter1(); + reload_jiffies_counter1(delta - 1); + } + return 0; +} + +static void set_clock_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + /* Nothing to do ... */ +} + +static DEFINE_PER_CPU(struct clock_event_device, mn10300_clockevent_device); +static DEFINE_PER_CPU(struct irqaction, timer_irq); + +static irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *cd; + unsigned int cpu = smp_processor_id(); + + if (cpu == 0) + stop_jiffies_counter(); + else + stop_jiffies_counter1(); + + cd = &per_cpu(mn10300_clockevent_device, cpu); + cd->event_handler(cd); + + return IRQ_HANDLED; +} + +static void event_handler(struct clock_event_device *dev) +{ +} + +int __init init_clockevents(void) +{ + struct clock_event_device *cd; + struct irqaction *iact; + unsigned int cpu = smp_processor_id(); + + cd = &per_cpu(mn10300_clockevent_device, cpu); + + if (cpu == 0) { + stop_jiffies_counter(); + cd->irq = TMJCIRQ; + } else { + stop_jiffies_counter1(); + cd->irq = TMJC1IRQ; + } + + cd->name = "Timestamp"; + cd->features = CLOCK_EVT_FEAT_ONESHOT; + + /* Calculate the min / max delta */ + clockevent_set_clock(cd, MN10300_JCCLK); + + cd->max_delta_ns = clockevent_delta2ns(TMJCBR_MAX, cd); + cd->min_delta_ns = clockevent_delta2ns(100, cd); + + cd->rating = 200; + cd->cpumask = cpumask_of(smp_processor_id()); + cd->set_mode = set_clock_mode; + cd->event_handler = event_handler; + cd->set_next_event = next_event; + + iact = &per_cpu(timer_irq, cpu); + iact->flags = IRQF_DISABLED | IRQF_SHARED | IRQF_TIMER; + iact->handler = timer_interrupt; + + clockevents_register_device(cd); + +#if defined(CONFIG_SMP) && !defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) + /* setup timer irq affinity so it only runs on this cpu */ + { + struct irq_desc *desc; + desc = irq_to_desc(cd->irq); + cpumask_copy(desc->affinity, cpumask_of(cpu)); + iact->flags |= IRQF_NOBALANCING; + } +#endif + + if (cpu == 0) { + reload_jiffies_counter(MN10300_JC_PER_HZ - 1); + iact->name = "CPU0 Timer"; + } else { + reload_jiffies_counter1(MN10300_JC_PER_HZ - 1); + iact->name = "CPU1 Timer"; + } + + setup_jiffies_interrupt(cd->irq, iact); + + return 0; +} diff --git a/arch/mn10300/kernel/csrc-mn10300.c b/arch/mn10300/kernel/csrc-mn10300.c new file mode 100644 index 000000000000..ba2f0c4d6e01 --- /dev/null +++ b/arch/mn10300/kernel/csrc-mn10300.c @@ -0,0 +1,35 @@ +/* MN10300 clocksource + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by Mark Salter (msalter@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include +#include "internal.h" + +static cycle_t mn10300_read(struct clocksource *cs) +{ + return read_timestamp_counter(); +} + +static struct clocksource clocksource_mn10300 = { + .name = "TSC", + .rating = 200, + .read = mn10300_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +int __init init_clocksource(void) +{ + startup_timestamp_counter(); + clocksource_set_clock(&clocksource_mn10300, MN10300_TSCCLK); + clocksource_register(&clocksource_mn10300); + return 0; +} diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 3d394b4eefba..f00b9bafcd3e 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -28,25 +28,17 @@ #include #include +#if defined(CONFIG_SMP) && defined(CONFIG_GDBSTUB) +#include +#endif /* CONFIG_SMP && CONFIG_GDBSTUB */ + #ifdef CONFIG_PREEMPT -#define preempt_stop __cli +#define preempt_stop LOCAL_IRQ_DISABLE #else #define preempt_stop #define resume_kernel restore_all #endif - .macro __cli - and ~EPSW_IM,epsw - or EPSW_IE|MN10300_CLI_LEVEL,epsw - nop - nop - nop - .endm - .macro __sti - or EPSW_IE|EPSW_IM_7,epsw - .endm - - .am33_2 ############################################################################### @@ -88,7 +80,7 @@ syscall_call: syscall_exit: # make sure we don't miss an interrupt setting need_resched or # sigpending between sampling and the rti - __cli + LOCAL_IRQ_DISABLE mov (TI_flags,a2),d2 btst _TIF_ALLWORK_MASK,d2 bne syscall_exit_work @@ -105,7 +97,7 @@ restore_all: syscall_exit_work: btst _TIF_SYSCALL_TRACE,d2 beq work_pending - __sti # could let syscall_trace_exit() call + LOCAL_IRQ_ENABLE # could let syscall_trace_exit() call # schedule() instead mov fp,d0 call syscall_trace_exit[],0 # do_syscall_trace(regs) @@ -121,7 +113,7 @@ work_resched: # make sure we don't miss an interrupt setting need_resched or # sigpending between sampling and the rti - __cli + LOCAL_IRQ_DISABLE # is there any work to be done other than syscall tracing? mov (TI_flags,a2),d2 @@ -168,7 +160,7 @@ ret_from_intr: ENTRY(resume_userspace) # make sure we don't miss an interrupt setting need_resched or # sigpending between sampling and the rti - __cli + LOCAL_IRQ_DISABLE # is there any work to be done on int/exception return? mov (TI_flags,a2),d2 @@ -178,7 +170,7 @@ ENTRY(resume_userspace) #ifdef CONFIG_PREEMPT ENTRY(resume_kernel) - __cli + LOCAL_IRQ_DISABLE mov (TI_preempt_count,a2),d0 # non-zero preempt_count ? cmp 0,d0 bne restore_all @@ -214,31 +206,6 @@ ENTRY(irq_handler) jmp ret_from_intr -############################################################################### -# -# Monitor Signal handler entry point -# -############################################################################### -ENTRY(monitor_signal) - movbu (0xae000001),d1 - cmp 1,d1 - beq monsignal - ret [],0 - -monsignal: - or EPSW_NMID,epsw - mov d0,a0 - mov a0,sp - mov (REG_EPSW,fp),d1 - and ~EPSW_nSL,d1 - mov d1,(REG_EPSW,fp) - movm (sp),[d2,d3,a2,a3,exreg0,exreg1,exother] - mov (sp),a1 - mov a1,usp - movm (sp),[other] - add 4,sp -here: jmp 0x8e000008-here+0x8e000008 - ############################################################################### # # Double Fault handler entry point @@ -276,6 +243,10 @@ double_fault_loop: ENTRY(raw_bus_error) add -4,sp mov d0,(sp) +#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) + mov (MMUCTR),d0 + mov d0,(MMUCTR) +#endif mov (BCBERR),d0 # what btst BCBERR_BEMR_DMA,d0 # see if it was an external bus error beq __common_exception_aux # it wasn't @@ -302,11 +273,88 @@ ENTRY(nmi_handler) add -4,sp mov d0,(sp) mov (TBR),d0 + +#ifdef CONFIG_SMP + add -4,sp + mov d0,(sp) # save d0(TBR) + movhu (NMIAGR),d0 + and NMIAGR_GN,d0 + lsr 0x2,d0 + cmp CALL_FUNCTION_NMI_IPI,d0 + bne 5f # if not call function, jump + + # function call nmi ipi + add 4,sp # no need to store TBR + mov GxICR_DETECT,d0 # clear NMI request + movbu d0,(GxICR(CALL_FUNCTION_NMI_IPI)) + movhu (GxICR(CALL_FUNCTION_NMI_IPI)),d0 + and ~EPSW_NMID,epsw # enable NMI + + mov (sp),d0 # restore d0 + SAVE_ALL + call smp_nmi_call_function_interrupt[],0 + RESTORE_ALL + +5: +#ifdef CONFIG_GDBSTUB + cmp GDB_NMI_IPI,d0 + bne 3f # if not gdb nmi ipi, jump + + # gdb nmi ipi + add 4,sp # no need to store TBR + mov GxICR_DETECT,d0 # clear NMI + movbu d0,(GxICR(GDB_NMI_IPI)) + movhu (GxICR(GDB_NMI_IPI)),d0 + and ~EPSW_NMID,epsw # enable NMI +#ifdef CONFIG_MN10300_CACHE_ENABLED + mov (gdbstub_nmi_opr_type),d0 + cmp GDBSTUB_NMI_CACHE_PURGE,d0 + bne 4f # if not gdb cache purge, jump + + # gdb cache purge nmi ipi + add -20,sp + mov d1,(4,sp) + mov a0,(8,sp) + mov a1,(12,sp) + mov mdr,d0 + mov d0,(16,sp) + call gdbstub_local_purge_cache[],0 + mov 0x1,d0 + mov (CPUID),d1 + asl d1,d0 + mov gdbstub_nmi_cpumask,a0 + bclr d0,(a0) + mov (4,sp),d1 + mov (8,sp),a0 + mov (12,sp),a1 + mov (16,sp),d0 + mov d0,mdr + add 20,sp + mov (sp),d0 + add 4,sp + rti +4: +#endif /* CONFIG_MN10300_CACHE_ENABLED */ + # gdb wait nmi ipi + mov (sp),d0 + SAVE_ALL + call gdbstub_nmi_wait[],0 + RESTORE_ALL +3: +#endif /* CONFIG_GDBSTUB */ + mov (sp),d0 # restore TBR to d0 + add 4,sp +#endif /* CONFIG_SMP */ + bra __common_exception_nonmi ENTRY(__common_exception) add -4,sp mov d0,(sp) +#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) + mov (MMUCTR),d0 + mov d0,(MMUCTR) +#endif __common_exception_aux: mov (TBR),d0 @@ -331,15 +379,21 @@ __common_exception_nonmi: mov d0,(REG_ORIG_D0,fp) #ifdef CONFIG_GDBSTUB +#ifdef CONFIG_SMP + call gdbstub_busy_check[],0 + and d0,d0 # check return value + beq 2f +#else /* CONFIG_SMP */ btst 0x01,(gdbstub_busy) beq 2f +#endif /* CONFIG_SMP */ and ~EPSW_IE,epsw mov fp,d0 mov a2,d1 call gdbstub_exception[],0 # gdbstub itself caused an exception bra restore_all 2: -#endif +#endif /* CONFIG_GDBSTUB */ mov fp,d0 # arg 0: stacked register file mov a2,d1 # arg 1: exception number @@ -374,11 +428,7 @@ ENTRY(set_excp_vector) add exception_table,d0 mov d1,(d0) mov 4,d1 -#if defined(CONFIG_MN10300_CACHE_WBACK) - jmp mn10300_dcache_flush_inv_range2 -#else ret [],0 -#endif ############################################################################### # diff --git a/arch/mn10300/kernel/fpu-low.S b/arch/mn10300/kernel/fpu-low.S index 96cfd47e68d5..78df25cfae29 100644 --- a/arch/mn10300/kernel/fpu-low.S +++ b/arch/mn10300/kernel/fpu-low.S @@ -8,25 +8,14 @@ * as published by the Free Software Foundation; either version * 2 of the Licence, or (at your option) any later version. */ +#include #include +#include +#include +#include +#include -############################################################################### -# -# void fpu_init_state(void) -# - initialise the FPU -# -############################################################################### - .globl fpu_init_state - .type fpu_init_state,@function -fpu_init_state: - mov epsw,d0 - or EPSW_FE,epsw - -#ifdef CONFIG_MN10300_PROC_MN103E010 - nop - nop - nop -#endif +.macro FPU_INIT_STATE_ALL fmov 0,fs0 fmov fs0,fs1 fmov fs0,fs2 @@ -60,7 +49,100 @@ fpu_init_state: fmov fs0,fs30 fmov fs0,fs31 fmov FPCR_INIT,fpcr +.endm + +.macro FPU_SAVE_ALL areg,dreg + fmov fs0,(\areg+) + fmov fs1,(\areg+) + fmov fs2,(\areg+) + fmov fs3,(\areg+) + fmov fs4,(\areg+) + fmov fs5,(\areg+) + fmov fs6,(\areg+) + fmov fs7,(\areg+) + fmov fs8,(\areg+) + fmov fs9,(\areg+) + fmov fs10,(\areg+) + fmov fs11,(\areg+) + fmov fs12,(\areg+) + fmov fs13,(\areg+) + fmov fs14,(\areg+) + fmov fs15,(\areg+) + fmov fs16,(\areg+) + fmov fs17,(\areg+) + fmov fs18,(\areg+) + fmov fs19,(\areg+) + fmov fs20,(\areg+) + fmov fs21,(\areg+) + fmov fs22,(\areg+) + fmov fs23,(\areg+) + fmov fs24,(\areg+) + fmov fs25,(\areg+) + fmov fs26,(\areg+) + fmov fs27,(\areg+) + fmov fs28,(\areg+) + fmov fs29,(\areg+) + fmov fs30,(\areg+) + fmov fs31,(\areg+) + fmov fpcr,\dreg + mov \dreg,(\areg) +.endm + +.macro FPU_RESTORE_ALL areg,dreg + fmov (\areg+),fs0 + fmov (\areg+),fs1 + fmov (\areg+),fs2 + fmov (\areg+),fs3 + fmov (\areg+),fs4 + fmov (\areg+),fs5 + fmov (\areg+),fs6 + fmov (\areg+),fs7 + fmov (\areg+),fs8 + fmov (\areg+),fs9 + fmov (\areg+),fs10 + fmov (\areg+),fs11 + fmov (\areg+),fs12 + fmov (\areg+),fs13 + fmov (\areg+),fs14 + fmov (\areg+),fs15 + fmov (\areg+),fs16 + fmov (\areg+),fs17 + fmov (\areg+),fs18 + fmov (\areg+),fs19 + fmov (\areg+),fs20 + fmov (\areg+),fs21 + fmov (\areg+),fs22 + fmov (\areg+),fs23 + fmov (\areg+),fs24 + fmov (\areg+),fs25 + fmov (\areg+),fs26 + fmov (\areg+),fs27 + fmov (\areg+),fs28 + fmov (\areg+),fs29 + fmov (\areg+),fs30 + fmov (\areg+),fs31 + mov (\areg),\dreg + fmov \dreg,fpcr +.endm +############################################################################### +# +# void fpu_init_state(void) +# - initialise the FPU +# +############################################################################### + .globl fpu_init_state + .type fpu_init_state,@function +fpu_init_state: + mov epsw,d0 + or EPSW_FE,epsw + +#ifdef CONFIG_MN10300_PROC_MN103E010 + nop + nop + nop +#endif + FPU_INIT_STATE_ALL #ifdef CONFIG_MN10300_PROC_MN103E010 nop nop @@ -89,40 +171,7 @@ fpu_save: nop #endif mov d0,a0 - fmov fs0,(a0+) - fmov fs1,(a0+) - fmov fs2,(a0+) - fmov fs3,(a0+) - fmov fs4,(a0+) - fmov fs5,(a0+) - fmov fs6,(a0+) - fmov fs7,(a0+) - fmov fs8,(a0+) - fmov fs9,(a0+) - fmov fs10,(a0+) - fmov fs11,(a0+) - fmov fs12,(a0+) - fmov fs13,(a0+) - fmov fs14,(a0+) - fmov fs15,(a0+) - fmov fs16,(a0+) - fmov fs17,(a0+) - fmov fs18,(a0+) - fmov fs19,(a0+) - fmov fs20,(a0+) - fmov fs21,(a0+) - fmov fs22,(a0+) - fmov fs23,(a0+) - fmov fs24,(a0+) - fmov fs25,(a0+) - fmov fs26,(a0+) - fmov fs27,(a0+) - fmov fs28,(a0+) - fmov fs29,(a0+) - fmov fs30,(a0+) - fmov fs31,(a0+) - fmov fpcr,d0 - mov d0,(a0) + FPU_SAVE_ALL a0,d0 #ifdef CONFIG_MN10300_PROC_MN103E010 nop nop @@ -135,63 +184,75 @@ fpu_save: ############################################################################### # -# void fpu_restore(struct fpu_state_struct *) -# - restore the fpu state -# - note that an FPU Operational exception might occur during this process +# void fpu_disabled(void) +# - handle an exception due to the FPU being disabled +# when CONFIG_FPU is enabled # ############################################################################### - .globl fpu_restore - .type fpu_restore,@function -fpu_restore: - mov epsw,d1 - or EPSW_FE,epsw /* enable the FPU so we can access it */ - -#ifdef CONFIG_MN10300_PROC_MN103E010 + .type fpu_disabled,@function + .globl fpu_disabled +fpu_disabled: + or EPSW_nAR|EPSW_FE,epsw nop nop -#endif - mov d0,a0 - fmov (a0+),fs0 - fmov (a0+),fs1 - fmov (a0+),fs2 - fmov (a0+),fs3 - fmov (a0+),fs4 - fmov (a0+),fs5 - fmov (a0+),fs6 - fmov (a0+),fs7 - fmov (a0+),fs8 - fmov (a0+),fs9 - fmov (a0+),fs10 - fmov (a0+),fs11 - fmov (a0+),fs12 - fmov (a0+),fs13 - fmov (a0+),fs14 - fmov (a0+),fs15 - fmov (a0+),fs16 - fmov (a0+),fs17 - fmov (a0+),fs18 - fmov (a0+),fs19 - fmov (a0+),fs20 - fmov (a0+),fs21 - fmov (a0+),fs22 - fmov (a0+),fs23 - fmov (a0+),fs24 - fmov (a0+),fs25 - fmov (a0+),fs26 - fmov (a0+),fs27 - fmov (a0+),fs28 - fmov (a0+),fs29 - fmov (a0+),fs30 - fmov (a0+),fs31 - mov (a0),d0 - fmov d0,fpcr -#ifdef CONFIG_MN10300_PROC_MN103E010 nop + + mov sp,a1 + mov (a1),d1 /* get epsw of user context */ + and ~(THREAD_SIZE-1),a1 /* a1: (thread_info *ti) */ + mov (TI_task,a1),a2 /* a2: (task_struct *tsk) */ + btst EPSW_nSL,d1 + beq fpu_used_in_kernel + + or EPSW_FE,d1 + mov d1,(sp) + mov (TASK_THREAD+THREAD_FPU_FLAGS,a2),d1 +#ifndef CONFIG_LAZY_SAVE_FPU + or __THREAD_HAS_FPU,d1 + mov d1,(TASK_THREAD+THREAD_FPU_FLAGS,a2) +#else /* !CONFIG_LAZY_SAVE_FPU */ + mov (fpu_state_owner),a0 + cmp 0,a0 + beq fpu_regs_save_end + + mov (TASK_THREAD+THREAD_UREGS,a0),a1 + add TASK_THREAD+THREAD_FPU_STATE,a0 + FPU_SAVE_ALL a0,d0 + + mov (REG_EPSW,a1),d0 + and ~EPSW_FE,d0 + mov d0,(REG_EPSW,a1) + +fpu_regs_save_end: + mov a2,(fpu_state_owner) +#endif /* !CONFIG_LAZY_SAVE_FPU */ + + btst __THREAD_USING_FPU,d1 + beq fpu_regs_init + add TASK_THREAD+THREAD_FPU_STATE,a2 + FPU_RESTORE_ALL a2,d0 + rti + +fpu_regs_init: + FPU_INIT_STATE_ALL + add TASK_THREAD+THREAD_FPU_FLAGS,a2 + bset __THREAD_USING_FPU,(0,a2) + rti + +fpu_used_in_kernel: + and ~(EPSW_nAR|EPSW_FE),epsw nop nop -#endif - mov d1,epsw - ret [],0 + add -4,sp + SAVE_ALL + mov -1,d0 + mov d0,(REG_ORIG_D0,fp) + + and ~EPSW_NMID,epsw + + mov fp,d0 + call fpu_disabled_in_kernel[],0 + jmp ret_from_exception - .size fpu_restore,.-fpu_restore + .size fpu_disabled,.-fpu_disabled diff --git a/arch/mn10300/kernel/fpu-nofpu-low.S b/arch/mn10300/kernel/fpu-nofpu-low.S new file mode 100644 index 000000000000..7ea087a549f4 --- /dev/null +++ b/arch/mn10300/kernel/fpu-nofpu-low.S @@ -0,0 +1,39 @@ +/* MN10300 Low level FPU management operations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include + +############################################################################### +# +# void fpu_disabled(void) +# - handle an exception due to the FPU being disabled +# when CONFIG_FPU is disabled +# +############################################################################### + .type fpu_disabled,@function + .globl fpu_disabled +fpu_disabled: + add -4,sp + SAVE_ALL + mov -1,d0 + mov d0,(REG_ORIG_D0,fp) + + and ~EPSW_NMID,epsw + + mov fp,d0 + call unexpected_fpu_exception[],0 + jmp ret_from_exception + + .size fpu_disabled,.-fpu_disabled diff --git a/arch/mn10300/kernel/fpu-nofpu.c b/arch/mn10300/kernel/fpu-nofpu.c new file mode 100644 index 000000000000..31c765b92c5d --- /dev/null +++ b/arch/mn10300/kernel/fpu-nofpu.c @@ -0,0 +1,30 @@ +/* MN10300 FPU management + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include + +/* + * handle an FPU operational exception + * - there's a possibility that if the FPU is asynchronous, the signal might + * be meant for a process other than the current one + */ +asmlinkage +void unexpected_fpu_exception(struct pt_regs *regs, enum exception_code code) +{ + panic("An FPU exception was received, but there's no FPU enabled."); +} + +/* + * fill in the FPU structure for a core dump + */ +int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpreg) +{ + return 0; /* not valid */ +} diff --git a/arch/mn10300/kernel/fpu.c b/arch/mn10300/kernel/fpu.c index e705f25ad5ff..5f9c3fa19a85 100644 --- a/arch/mn10300/kernel/fpu.c +++ b/arch/mn10300/kernel/fpu.c @@ -12,56 +12,19 @@ #include #include #include +#include +#ifdef CONFIG_LAZY_SAVE_FPU struct task_struct *fpu_state_owner; +#endif /* - * handle an exception due to the FPU being disabled + * error functions in FPU disabled exception */ -asmlinkage void fpu_disabled(struct pt_regs *regs, enum exception_code code) +asmlinkage void fpu_disabled_in_kernel(struct pt_regs *regs) { - struct task_struct *tsk = current; - - if (!user_mode(regs)) - die_if_no_fixup("An FPU Disabled exception happened in" - " kernel space\n", - regs, code); - -#ifdef CONFIG_FPU - preempt_disable(); - - /* transfer the last process's FPU state to memory */ - if (fpu_state_owner) { - fpu_save(&fpu_state_owner->thread.fpu_state); - fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE; - } - - /* the current process now owns the FPU state */ - fpu_state_owner = tsk; - regs->epsw |= EPSW_FE; - - /* load the FPU with the current process's FPU state or invent a new - * clean one if the process doesn't have one */ - if (is_using_fpu(tsk)) { - fpu_restore(&tsk->thread.fpu_state); - } else { - fpu_init_state(); - set_using_fpu(tsk); - } - - preempt_enable(); -#else - { - siginfo_t info; - - info.si_signo = SIGFPE; - info.si_errno = 0; - info.si_addr = (void *) tsk->thread.uregs->pc; - info.si_code = FPE_FLTINV; - - force_sig_info(SIGFPE, &info, tsk); - } -#endif /* CONFIG_FPU */ + die_if_no_fixup("An FPU Disabled exception happened in kernel space\n", + regs, EXCEP_FPU_DISABLED); } /* @@ -71,15 +34,16 @@ asmlinkage void fpu_disabled(struct pt_regs *regs, enum exception_code code) */ asmlinkage void fpu_exception(struct pt_regs *regs, enum exception_code code) { - struct task_struct *tsk = fpu_state_owner; + struct task_struct *tsk = current; siginfo_t info; + u32 fpcr; if (!user_mode(regs)) die_if_no_fixup("An FPU Operation exception happened in" " kernel space\n", regs, code); - if (!tsk) + if (!is_using_fpu(tsk)) die_if_no_fixup("An FPU Operation exception happened," " but the FPU is not in use", regs, code); @@ -89,48 +53,45 @@ asmlinkage void fpu_exception(struct pt_regs *regs, enum exception_code code) info.si_addr = (void *) tsk->thread.uregs->pc; info.si_code = FPE_FLTINV; -#ifdef CONFIG_FPU - { - u32 fpcr; + unlazy_fpu(tsk); - /* get FPCR (we need to enable the FPU whilst we do this) */ - asm volatile(" or %1,epsw \n" -#ifdef CONFIG_MN10300_PROC_MN103E010 - " nop \n" - " nop \n" - " nop \n" -#endif - " fmov fpcr,%0 \n" -#ifdef CONFIG_MN10300_PROC_MN103E010 - " nop \n" - " nop \n" - " nop \n" -#endif - " and %2,epsw \n" - : "=&d"(fpcr) - : "i"(EPSW_FE), "i"(~EPSW_FE) - ); - - if (fpcr & FPCR_EC_Z) - info.si_code = FPE_FLTDIV; - else if (fpcr & FPCR_EC_O) - info.si_code = FPE_FLTOVF; - else if (fpcr & FPCR_EC_U) - info.si_code = FPE_FLTUND; - else if (fpcr & FPCR_EC_I) - info.si_code = FPE_FLTRES; - } -#endif + fpcr = tsk->thread.fpu_state.fpcr; + + if (fpcr & FPCR_EC_Z) + info.si_code = FPE_FLTDIV; + else if (fpcr & FPCR_EC_O) + info.si_code = FPE_FLTOVF; + else if (fpcr & FPCR_EC_U) + info.si_code = FPE_FLTUND; + else if (fpcr & FPCR_EC_I) + info.si_code = FPE_FLTRES; force_sig_info(SIGFPE, &info, tsk); } +/* + * handle an FPU invalid_op exception + * - Derived from DO_EINFO() macro in arch/mn10300/kernel/traps.c + */ +asmlinkage void fpu_invalid_op(struct pt_regs *regs, enum exception_code code) +{ + siginfo_t info; + + if (!user_mode(regs)) + die_if_no_fixup("FPU invalid opcode", regs, code); + + info.si_signo = SIGILL; + info.si_errno = 0; + info.si_code = ILL_COPROC; + info.si_addr = (void *) regs->pc; + force_sig_info(info.si_signo, &info, current); +} + /* * save the FPU state to a signal context */ int fpu_setup_sigcontext(struct fpucontext *fpucontext) { -#ifdef CONFIG_FPU struct task_struct *tsk = current; if (!is_using_fpu(tsk)) @@ -142,11 +103,19 @@ int fpu_setup_sigcontext(struct fpucontext *fpucontext) */ preempt_disable(); +#ifndef CONFIG_LAZY_SAVE_FPU + if (tsk->thread.fpu_flags & THREAD_HAS_FPU) { + fpu_save(&tsk->thread.fpu_state); + tsk->thread.uregs->epsw &= ~EPSW_FE; + tsk->thread.fpu_flags &= ~THREAD_HAS_FPU; + } +#else /* !CONFIG_LAZY_SAVE_FPU */ if (fpu_state_owner == tsk) { fpu_save(&tsk->thread.fpu_state); fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE; fpu_state_owner = NULL; } +#endif /* !CONFIG_LAZY_SAVE_FPU */ preempt_enable(); @@ -161,9 +130,6 @@ int fpu_setup_sigcontext(struct fpucontext *fpucontext) return -1; return 1; -#else - return 0; -#endif } /* @@ -171,17 +137,23 @@ int fpu_setup_sigcontext(struct fpucontext *fpucontext) */ void fpu_kill_state(struct task_struct *tsk) { -#ifdef CONFIG_FPU /* disown anything left in the FPU */ preempt_disable(); +#ifndef CONFIG_LAZY_SAVE_FPU + if (tsk->thread.fpu_flags & THREAD_HAS_FPU) { + tsk->thread.uregs->epsw &= ~EPSW_FE; + tsk->thread.fpu_flags &= ~THREAD_HAS_FPU; + } +#else /* !CONFIG_LAZY_SAVE_FPU */ if (fpu_state_owner == tsk) { fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE; fpu_state_owner = NULL; } +#endif /* !CONFIG_LAZY_SAVE_FPU */ preempt_enable(); -#endif + /* we no longer have a valid current FPU state */ clear_using_fpu(tsk); } @@ -195,8 +167,7 @@ int fpu_restore_sigcontext(struct fpucontext *fpucontext) int ret; /* load up the old FPU state */ - ret = copy_from_user(&tsk->thread.fpu_state, - fpucontext, + ret = copy_from_user(&tsk->thread.fpu_state, fpucontext, min(sizeof(struct fpu_state_struct), sizeof(struct fpucontext))); if (!ret) diff --git a/arch/mn10300/kernel/gdb-io-serial-low.S b/arch/mn10300/kernel/gdb-io-serial-low.S index 4998b24f5d3a..b1d0152e96cb 100644 --- a/arch/mn10300/kernel/gdb-io-serial-low.S +++ b/arch/mn10300/kernel/gdb-io-serial-low.S @@ -18,6 +18,7 @@ #include #include #include +#include #include .text @@ -69,7 +70,7 @@ gdbstub_io_rx_overflow: bra gdbstub_io_rx_done gdbstub_io_rx_enter: - or EPSW_IE|EPSW_IM_1,epsw + LOCAL_CHANGE_INTR_MASK_LEVEL(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL+1)) add -4,sp SAVE_ALL @@ -80,7 +81,7 @@ gdbstub_io_rx_enter: mov fp,d0 call gdbstub_rx_irq[],0 # gdbstub_rx_irq(regs,excep) - and ~EPSW_IE,epsw + LOCAL_CLI bclr 0x01,(gdbstub_busy) .globl gdbstub_return diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c index ae663dc717e9..0d5d63c91dc3 100644 --- a/arch/mn10300/kernel/gdb-io-serial.c +++ b/arch/mn10300/kernel/gdb-io-serial.c @@ -23,6 +23,7 @@ #include #include #include +#include /* * initialise the GDB stub @@ -45,22 +46,34 @@ void gdbstub_io_init(void) XIRQxICR(GDBPORT_SERIAL_IRQ) = 0; tmp = XIRQxICR(GDBPORT_SERIAL_IRQ); +#if CONFIG_GDBSTUB_IRQ_LEVEL == 0 IVAR0 = EXCEP_IRQ_LEVEL0; - set_intr_stub(EXCEP_IRQ_LEVEL0, gdbstub_io_rx_handler); +#elif CONFIG_GDBSTUB_IRQ_LEVEL == 1 + IVAR1 = EXCEP_IRQ_LEVEL1; +#elif CONFIG_GDBSTUB_IRQ_LEVEL == 2 + IVAR2 = EXCEP_IRQ_LEVEL2; +#elif CONFIG_GDBSTUB_IRQ_LEVEL == 3 + IVAR3 = EXCEP_IRQ_LEVEL3; +#elif CONFIG_GDBSTUB_IRQ_LEVEL == 4 + IVAR4 = EXCEP_IRQ_LEVEL4; +#elif CONFIG_GDBSTUB_IRQ_LEVEL == 5 + IVAR5 = EXCEP_IRQ_LEVEL5; +#else +#error "Unknown irq level for gdbstub." +#endif + + set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL), + gdbstub_io_rx_handler); XIRQxICR(GDBPORT_SERIAL_IRQ) &= ~GxICR_REQUEST; - XIRQxICR(GDBPORT_SERIAL_IRQ) = GxICR_ENABLE | GxICR_LEVEL_0; + XIRQxICR(GDBPORT_SERIAL_IRQ) = + GxICR_ENABLE | NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL); tmp = XIRQxICR(GDBPORT_SERIAL_IRQ); GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI; /* permit level 0 IRQs to take place */ - asm volatile( - " and %0,epsw \n" - " or %1,epsw \n" - : - : "i"(~EPSW_IM), "i"(EPSW_IE | EPSW_IM_1) - ); + local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); } /* @@ -87,6 +100,9 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock) { unsigned ix; u8 ch, st; +#if defined(CONFIG_MN10300_WD_TIMER) + int cpu; +#endif *_ch = 0xff; @@ -104,8 +120,9 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock) if (nonblock) return -EAGAIN; #ifdef CONFIG_MN10300_WD_TIMER - watchdog_alert_counter = 0; -#endif /* CONFIG_MN10300_WD_TIMER */ + for (cpu = 0; cpu < NR_CPUS; cpu++) + watchdog_alert_counter[cpu] = 0; +#endif goto try_again; } diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c index a560bbc3137d..97dfda23342c 100644 --- a/arch/mn10300/kernel/gdb-io-ttysm.c +++ b/arch/mn10300/kernel/gdb-io-ttysm.c @@ -58,9 +58,12 @@ void __init gdbstub_io_init(void) gdbstub_io_set_baud(115200); /* we want to get serial receive interrupts */ - set_intr_level(gdbstub_port->rx_irq, GxICR_LEVEL_0); - set_intr_level(gdbstub_port->tx_irq, GxICR_LEVEL_0); - set_intr_stub(EXCEP_IRQ_LEVEL0, gdbstub_io_rx_handler); + set_intr_level(gdbstub_port->rx_irq, + NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL)); + set_intr_level(gdbstub_port->tx_irq, + NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL)); + set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL), + gdbstub_io_rx_handler); *gdbstub_port->rx_icr |= GxICR_ENABLE; tmp = *gdbstub_port->rx_icr; @@ -84,12 +87,7 @@ void __init gdbstub_io_init(void) tmp = *gdbstub_port->_control; /* permit level 0 IRQs only */ - asm volatile( - " and %0,epsw \n" - " or %1,epsw \n" - : - : "i"(~EPSW_IM), "i"(EPSW_IE|EPSW_IM_1) - ); + local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); } /* @@ -184,6 +182,9 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock) { unsigned ix; u8 ch, st; +#if defined(CONFIG_MN10300_WD_TIMER) + int cpu; +#endif *_ch = 0xff; @@ -201,8 +202,9 @@ try_again: if (nonblock) return -EAGAIN; #ifdef CONFIG_MN10300_WD_TIMER - watchdog_alert_counter = 0; -#endif /* CONFIG_MN10300_WD_TIMER */ + for (cpu = 0; cpu < NR_CPUS; cpu++) + watchdog_alert_counter[cpu] = 0; +#endif goto try_again; } diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c index 41b11706c8ed..a5fc3f05309b 100644 --- a/arch/mn10300/kernel/gdb-stub.c +++ b/arch/mn10300/kernel/gdb-stub.c @@ -440,15 +440,11 @@ static const unsigned char gdbstub_insn_sizes[256] = static int __gdbstub_mark_bp(u8 *addr, int ix) { - if (addr < (u8 *) 0x70000000UL) - return 0; - /* 70000000-7fffffff: vmalloc area */ - if (addr < (u8 *) 0x80000000UL) + /* vmalloc area */ + if (((u8 *) VMALLOC_START <= addr) && (addr < (u8 *) VMALLOC_END)) goto okay; - if (addr < (u8 *) 0x8c000000UL) - return 0; - /* 8c000000-93ffffff: SRAM, SDRAM */ - if (addr < (u8 *) 0x94000000UL) + /* SRAM, SDRAM */ + if (((u8 *) 0x80000000UL <= addr) && (addr < (u8 *) 0xa0000000UL)) goto okay; return 0; @@ -1197,9 +1193,8 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep) mn10300_set_gdbleds(1); asm volatile("mov mdr,%0" : "=d"(mdr)); - asm volatile("mov epsw,%0" : "=d"(epsw)); - asm volatile("mov %0,epsw" - :: "d"((epsw & ~EPSW_IM) | EPSW_IE | EPSW_IM_1)); + local_save_flags(epsw); + local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); gdbstub_store_fpu(); diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S index 14f27f3bfaf4..73e00fc78072 100644 --- a/arch/mn10300/kernel/head.S +++ b/arch/mn10300/kernel/head.S @@ -19,6 +19,12 @@ #include #include #include +#ifdef CONFIG_SMP +#include +#include +#include +#include +#endif /* CONFIG_SMP */ __HEAD @@ -30,17 +36,51 @@ .globl _start .type _start,@function _start: +#ifdef CONFIG_SMP + # + # If this is a secondary CPU (AP), then deal with that elsewhere + # + mov (CPUID),d3 + and CPUID_MASK,d3 + bne startup_secondary + + # + # We're dealing with the primary CPU (BP) here, then. + # Keep BP's D0,D1,D2 register for boot check. + # + + # Set up the Boot IPI for each secondary CPU + mov 0x1,a0 +loop_set_secondary_icr: + mov a0,a1 + asl CROSS_ICR_CPU_SHIFT,a1 + add CROSS_GxICR(SMP_BOOT_IRQ,0),a1 + movhu (a1),d3 + or GxICR_ENABLE|GxICR_LEVEL_0,d3 + movhu d3,(a1) + movhu (a1),d3 # flush + inc a0 + cmp NR_CPUS,a0 + bne loop_set_secondary_icr +#endif /* CONFIG_SMP */ + # save commandline pointer mov d0,a3 # preload the PGD pointer register mov swapper_pg_dir,d0 mov d0,(PTBR) + clr d0 + movbu d0,(PIDR) # turn on the TLBs mov MMUCTR_IIV|MMUCTR_DIV,d0 mov d0,(MMUCTR) +#ifdef CONFIG_AM34_2 + mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE|MMUCTR_WTE,d0 +#else mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0 +#endif mov d0,(MMUCTR) # turn on AM33v2 exception handling mode and set the trap table base @@ -51,6 +91,11 @@ _start: mov d0,(TBR) # invalidate and enable both of the caches +#ifdef CONFIG_SMP + mov ECHCTR,a0 + clr d0 + mov d0,(a0) +#endif mov CHCTR,a0 clr d0 movhu d0,(a0) # turn off first @@ -61,18 +106,18 @@ _start: btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy lne -#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_CACHE_ENABLED #ifdef CONFIG_MN10300_CACHE_WBACK #ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0 #else mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0 -#endif /* CACHE_DISABLED */ +#endif /* NOWRALLOC */ #else mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0 #endif /* WBACK */ movhu d0,(a0) # enable -#endif /* NOWRALLOC */ +#endif /* ENABLED */ # turn on RTS on the debug serial port if applicable #ifdef CONFIG_MN10300_UNIT_ASB2305 @@ -206,6 +251,44 @@ __no_parameters: call processor_init[],0 call unit_init[],0 +#ifdef CONFIG_SMP + # mark the primary CPU in cpu_boot_map + mov cpu_boot_map,a0 + mov 0x1,d0 + mov d0,(a0) + + # signal each secondary CPU to begin booting + mov 0x1,d2 # CPU ID + +loop_request_boot_secondary: + mov d2,a0 + # send SMP_BOOT_IPI to secondary CPU + asl CROSS_ICR_CPU_SHIFT,a0 + add CROSS_GxICR(SMP_BOOT_IRQ,0),a0 + movhu (a0),d0 + or GxICR_REQUEST|GxICR_DETECT,d0 + movhu d0,(a0) + movhu (a0),d0 # flush + + # wait up to 100ms for AP's IPI to be received + clr d3 +wait_on_secondary_boot: + mov DELAY_TIME_BOOT_IPI,d0 + call __delay[],0 + inc d3 + mov cpu_boot_map,a0 + mov (a0),d0 + lsr d2,d0 + btst 0x1,d0 + bne 1f + cmp TIME_OUT_COUNT_BOOT_IPI,d3 + bne wait_on_secondary_boot +1: + inc d2 + cmp NR_CPUS,d2 + bne loop_request_boot_secondary +#endif /* CONFIG_SMP */ + #ifdef CONFIG_GDBSTUB call gdbstub_init[],0 @@ -217,7 +300,118 @@ __gdbstub_pause: #endif jmp start_kernel - .size _start, _start-. + .size _start,.-_start + +############################################################################### +# +# Secondary CPU boot point +# +############################################################################### +#ifdef CONFIG_SMP +startup_secondary: + # preload the PGD pointer register + mov swapper_pg_dir,d0 + mov d0,(PTBR) + clr d0 + movbu d0,(PIDR) + + # turn on the TLBs + mov MMUCTR_IIV|MMUCTR_DIV,d0 + mov d0,(MMUCTR) +#ifdef CONFIG_AM34_2 + mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE|MMUCTR_WTE,d0 +#else + mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0 +#endif + mov d0,(MMUCTR) + + # turn on AM33v2 exception handling mode and set the trap table base + movhu (CPUP),d0 + or CPUP_EXM_AM33V2,d0 + movhu d0,(CPUP) + + # set the interrupt vector table + mov CONFIG_INTERRUPT_VECTOR_BASE,d0 + mov d0,(TBR) + + # invalidate and enable both of the caches + mov ECHCTR,a0 + clr d0 + mov d0,(a0) + mov CHCTR,a0 + clr d0 + movhu d0,(a0) # turn off first + mov CHCTR_ICINV|CHCTR_DCINV,d0 + movhu d0,(a0) + setlb + mov (a0),d0 + btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy (use CPU loop buffer) + lne + +#ifdef CONFIG_MN10300_CACHE_ENABLED +#ifdef CONFIG_MN10300_CACHE_WBACK +#ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC + mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0 +#else + mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0 +#endif /* !NOWRALLOC */ +#else + mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0 +#endif /* WBACK */ + movhu d0,(a0) # enable +#endif /* ENABLED */ + + # Clear the boot IPI interrupt for this CPU + movhu (GxICR(SMP_BOOT_IRQ)),d0 + and ~GxICR_REQUEST,d0 + movhu d0,(GxICR(SMP_BOOT_IRQ)) + movhu (GxICR(SMP_BOOT_IRQ)),d0 # flush + + /* get stack */ + mov CONFIG_INTERRUPT_VECTOR_BASE + CONFIG_BOOT_STACK_OFFSET,a0 + mov (CPUID),d0 + and CPUID_MASK,d0 + mulu CONFIG_BOOT_STACK_SIZE,d0 + sub d0,a0 + mov a0,sp + + # init interrupt for AP + call smp_prepare_cpu_init[],0 + + # mark this secondary CPU in cpu_boot_map + mov (CPUID),d0 + mov 0x1,d1 + asl d0,d1 + mov cpu_boot_map,a0 + bset d1,(a0) + + or EPSW_IE|EPSW_IM_1,epsw # permit level 0 interrupts + nop + nop +#ifdef CONFIG_MN10300_CACHE_WBACK + # flush the local cache if it's in writeback mode + call mn10300_local_dcache_flush_inv[],0 + setlb + mov (CHCTR),d0 + btst CHCTR_DCBUSY,d0 # wait till not busy (use CPU loop buffer) + lne +#endif + + # now sleep waiting for further instructions +secondary_sleep: + mov CPUM_SLEEP,d0 + movhu d0,(CPUM) + nop + nop + bra secondary_sleep + .size startup_secondary,.-startup_secondary +#endif /* CONFIG_SMP */ + +############################################################################### +# +# +# +############################################################################### ENTRY(__head_end) /* diff --git a/arch/mn10300/kernel/internal.h b/arch/mn10300/kernel/internal.h index eee2eee86267..6a064ab5af07 100644 --- a/arch/mn10300/kernel/internal.h +++ b/arch/mn10300/kernel/internal.h @@ -9,6 +9,9 @@ * 2 of the Licence, or (at your option) any later version. */ +struct clocksource; +struct clock_event_device; + /* * kthread.S */ @@ -18,3 +21,25 @@ extern int kernel_thread_helper(int); * entry.S */ extern void ret_from_fork(struct task_struct *) __attribute__((noreturn)); + +/* + * smp-low.S + */ +#ifdef CONFIG_SMP +extern void mn10300_low_ipi_handler(void); +#endif + +/* + * time.c + */ +extern irqreturn_t local_timer_interrupt(void); + +/* + * time.c + */ +#ifdef CONFIG_CEVT_MN10300 +extern void clockevent_set_clock(struct clock_event_device *, unsigned int); +#endif +#ifdef CONFIG_CSRC_MN10300 +extern void clocksource_set_clock(struct clocksource *, unsigned int); +#endif diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index e2d5ed891f37..c2e44597c22b 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -12,11 +12,26 @@ #include #include #include +#include #include +#include -unsigned long __mn10300_irq_enabled_epsw = EPSW_IE | EPSW_IM_7; +unsigned long __mn10300_irq_enabled_epsw[NR_CPUS] __cacheline_aligned_in_smp = { + [0 ... NR_CPUS - 1] = EPSW_IE | EPSW_IM_7 +}; EXPORT_SYMBOL(__mn10300_irq_enabled_epsw); +#ifdef CONFIG_SMP +static char irq_affinity_online[NR_IRQS] = { + [0 ... NR_IRQS - 1] = 0 +}; + +#define NR_IRQ_WORDS ((NR_IRQS + 31) / 32) +static unsigned long irq_affinity_request[NR_IRQ_WORDS] = { + [0 ... NR_IRQ_WORDS - 1] = 0 +}; +#endif /* CONFIG_SMP */ + atomic_t irq_err_count; /* @@ -24,30 +39,67 @@ atomic_t irq_err_count; */ static void mn10300_cpupic_ack(unsigned int irq) { + unsigned long flags; u16 tmp; - *(volatile u8 *) &GxICR(irq) = GxICR_DETECT; + + flags = arch_local_cli_save(); + GxICR_u8(irq) = GxICR_DETECT; tmp = GxICR(irq); + arch_local_irq_restore(flags); } -static void mn10300_cpupic_mask(unsigned int irq) +static void __mask_and_set_icr(unsigned int irq, + unsigned int mask, unsigned int set) { - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL); + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + tmp = GxICR(irq); + GxICR(irq) = (tmp & mask) | set; tmp = GxICR(irq); + arch_local_irq_restore(flags); +} + +static void mn10300_cpupic_mask(unsigned int irq) +{ + __mask_and_set_icr(irq, GxICR_LEVEL, 0); } static void mn10300_cpupic_mask_ack(unsigned int irq) { - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT; - tmp = GxICR(irq); +#ifdef CONFIG_SMP + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + + if (!test_and_clear_bit(irq, irq_affinity_request)) { + tmp = GxICR(irq); + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT; + tmp = GxICR(irq); + } else { + u16 tmp2; + tmp = GxICR(irq); + GxICR(irq) = (tmp & GxICR_LEVEL); + tmp2 = GxICR(irq); + + irq_affinity_online[irq] = + any_online_cpu(*irq_desc[irq].affinity); + CROSS_GxICR(irq, irq_affinity_online[irq]) = + (tmp & (GxICR_LEVEL | GxICR_ENABLE)) | GxICR_DETECT; + tmp = CROSS_GxICR(irq, irq_affinity_online[irq]); + } + + arch_local_irq_restore(flags); +#else /* CONFIG_SMP */ + __mask_and_set_icr(irq, GxICR_LEVEL, GxICR_DETECT); +#endif /* CONFIG_SMP */ } static void mn10300_cpupic_unmask(unsigned int irq) { - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE; - tmp = GxICR(irq); + __mask_and_set_icr(irq, GxICR_LEVEL, GxICR_ENABLE); } static void mn10300_cpupic_unmask_clear(unsigned int irq) @@ -56,11 +108,89 @@ static void mn10300_cpupic_unmask_clear(unsigned int irq) * device has ceased to assert its interrupt line and the interrupt * channel has been disabled in the PIC, so for level-triggered * interrupts we need to clear the request bit when we re-enable */ - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; - tmp = GxICR(irq); +#ifdef CONFIG_SMP + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + + if (!test_and_clear_bit(irq, irq_affinity_request)) { + tmp = GxICR(irq); + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; + tmp = GxICR(irq); + } else { + tmp = GxICR(irq); + + irq_affinity_online[irq] = any_online_cpu(*irq_desc[irq].affinity); + CROSS_GxICR(irq, irq_affinity_online[irq]) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; + tmp = CROSS_GxICR(irq, irq_affinity_online[irq]); + } + + arch_local_irq_restore(flags); +#else /* CONFIG_SMP */ + __mask_and_set_icr(irq, GxICR_LEVEL, GxICR_ENABLE | GxICR_DETECT); +#endif /* CONFIG_SMP */ } +#ifdef CONFIG_SMP +static int +mn10300_cpupic_setaffinity(unsigned int irq, const struct cpumask *mask) +{ + unsigned long flags; + int err; + + flags = arch_local_cli_save(); + + /* check irq no */ + switch (irq) { + case TMJCIRQ: + case RESCHEDULE_IPI: + case CALL_FUNC_SINGLE_IPI: + case LOCAL_TIMER_IPI: + case FLUSH_CACHE_IPI: + case CALL_FUNCTION_NMI_IPI: + case GDB_NMI_IPI: +#ifdef CONFIG_MN10300_TTYSM0 + case SC0RXIRQ: + case SC0TXIRQ: +#ifdef CONFIG_MN10300_TTYSM0_TIMER8 + case TM8IRQ: +#elif CONFIG_MN10300_TTYSM0_TIMER2 + case TM2IRQ: +#endif /* CONFIG_MN10300_TTYSM0_TIMER8 */ +#endif /* CONFIG_MN10300_TTYSM0 */ + +#ifdef CONFIG_MN10300_TTYSM1 + case SC1RXIRQ: + case SC1TXIRQ: +#ifdef CONFIG_MN10300_TTYSM1_TIMER12 + case TM12IRQ: +#elif CONFIG_MN10300_TTYSM1_TIMER9 + case TM9IRQ: +#elif CONFIG_MN10300_TTYSM1_TIMER3 + case TM3IRQ: +#endif /* CONFIG_MN10300_TTYSM1_TIMER12 */ +#endif /* CONFIG_MN10300_TTYSM1 */ + +#ifdef CONFIG_MN10300_TTYSM2 + case SC2RXIRQ: + case SC2TXIRQ: + case TM10IRQ: +#endif /* CONFIG_MN10300_TTYSM2 */ + err = -1; + break; + + default: + set_bit(irq, irq_affinity_request); + err = 0; + break; + } + + arch_local_irq_restore(flags); + return err; +} +#endif /* CONFIG_SMP */ + /* * MN10300 PIC level-triggered IRQ handling. * @@ -79,6 +209,9 @@ static struct irq_chip mn10300_cpu_pic_level = { .mask = mn10300_cpupic_mask, .mask_ack = mn10300_cpupic_mask, .unmask = mn10300_cpupic_unmask_clear, +#ifdef CONFIG_SMP + .set_affinity = mn10300_cpupic_setaffinity, +#endif }; /* @@ -94,6 +227,9 @@ static struct irq_chip mn10300_cpu_pic_edge = { .mask = mn10300_cpupic_mask, .mask_ack = mn10300_cpupic_mask_ack, .unmask = mn10300_cpupic_unmask, +#ifdef CONFIG_SMP + .set_affinity = mn10300_cpupic_setaffinity, +#endif }; /* @@ -111,14 +247,34 @@ void ack_bad_irq(int irq) */ void set_intr_level(int irq, u16 level) { - u16 tmp; + BUG_ON(in_interrupt()); - if (in_interrupt()) - BUG(); + __mask_and_set_icr(irq, GxICR_ENABLE, level); +} - tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_ENABLE) | level; - tmp = GxICR(irq); +void mn10300_intc_set_level(unsigned int irq, unsigned int level) +{ + set_intr_level(irq, NUM2GxICR_LEVEL(level) & GxICR_LEVEL); +} + +void mn10300_intc_clear(unsigned int irq) +{ + __mask_and_set_icr(irq, GxICR_LEVEL | GxICR_ENABLE, GxICR_DETECT); +} + +void mn10300_intc_set(unsigned int irq) +{ + __mask_and_set_icr(irq, 0, GxICR_REQUEST | GxICR_DETECT); +} + +void mn10300_intc_enable(unsigned int irq) +{ + mn10300_cpupic_unmask(irq); +} + +void mn10300_intc_disable(unsigned int irq) +{ + mn10300_cpupic_mask(irq); } /* @@ -126,7 +282,7 @@ void set_intr_level(int irq, u16 level) * than before * - see Documentation/mn10300/features.txt */ -void set_intr_postackable(int irq) +void mn10300_set_lateack_irq_type(int irq) { set_irq_chip_and_handler(irq, &mn10300_cpu_pic_level, handle_level_irq); @@ -147,6 +303,7 @@ void __init init_IRQ(void) * interrupts */ set_irq_chip_and_handler(irq, &mn10300_cpu_pic_edge, handle_level_irq); + unit_init_IRQ(); } @@ -156,20 +313,22 @@ void __init init_IRQ(void) asmlinkage void do_IRQ(void) { unsigned long sp, epsw, irq_disabled_epsw, old_irq_enabled_epsw; + unsigned int cpu_id = smp_processor_id(); int irq; sp = current_stack_pointer(); - if (sp - (sp & ~(THREAD_SIZE - 1)) < STACK_WARN) - BUG(); + BUG_ON(sp - (sp & ~(THREAD_SIZE - 1)) < STACK_WARN); /* make sure local_irq_enable() doesn't muck up the interrupt priority * setting in EPSW */ - old_irq_enabled_epsw = __mn10300_irq_enabled_epsw; + old_irq_enabled_epsw = __mn10300_irq_enabled_epsw[cpu_id]; local_save_flags(epsw); - __mn10300_irq_enabled_epsw = EPSW_IE | (EPSW_IM & epsw); + __mn10300_irq_enabled_epsw[cpu_id] = EPSW_IE | (EPSW_IM & epsw); irq_disabled_epsw = EPSW_IE | MN10300_CLI_LEVEL; - __IRQ_STAT(smp_processor_id(), __irq_count)++; +#ifdef CONFIG_MN10300_WD_TIMER + __IRQ_STAT(cpu_id, __irq_count)++; +#endif irq_enter(); @@ -189,7 +348,7 @@ asmlinkage void do_IRQ(void) local_irq_restore(epsw); } - __mn10300_irq_enabled_epsw = old_irq_enabled_epsw; + __mn10300_irq_enabled_epsw[cpu_id] = old_irq_enabled_epsw; irq_exit(); } @@ -222,9 +381,16 @@ int show_interrupts(struct seq_file *p, void *v) seq_printf(p, "%3d: ", i); for_each_present_cpu(cpu) seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu)); - seq_printf(p, " %14s.%u", irq_desc[i].chip->name, - (GxICR(i) & GxICR_LEVEL) >> - GxICR_LEVEL_SHIFT); + + if (i < NR_CPU_IRQS) + seq_printf(p, " %14s.%u", + irq_desc[i].chip->name, + (GxICR(i) & GxICR_LEVEL) >> + GxICR_LEVEL_SHIFT); + else + seq_printf(p, " %14s", + irq_desc[i].chip->name); + seq_printf(p, " %s", action->name); for (action = action->next; @@ -240,11 +406,13 @@ int show_interrupts(struct seq_file *p, void *v) /* polish off with NMI and error counters */ case NR_IRQS: +#ifdef CONFIG_MN10300_WD_TIMER seq_printf(p, "NMI: "); for (j = 0; j < NR_CPUS; j++) if (cpu_online(j)) seq_printf(p, "%10u ", nmi_count(j)); seq_putc(p, '\n'); +#endif seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); break; @@ -252,3 +420,51 @@ int show_interrupts(struct seq_file *p, void *v) return 0; } + +#ifdef CONFIG_HOTPLUG_CPU +void migrate_irqs(void) +{ + irq_desc_t *desc; + int irq; + unsigned int self, new; + unsigned long flags; + + self = smp_processor_id(); + for (irq = 0; irq < NR_IRQS; irq++) { + desc = irq_desc + irq; + + if (desc->status == IRQ_PER_CPU) + continue; + + if (cpu_isset(self, irq_desc[irq].affinity) && + !cpus_intersects(irq_affinity[irq], cpu_online_map)) { + int cpu_id; + cpu_id = first_cpu(cpu_online_map); + cpu_set(cpu_id, irq_desc[irq].affinity); + } + /* We need to operate irq_affinity_online atomically. */ + arch_local_cli_save(flags); + if (irq_affinity_online[irq] == self) { + u16 x, tmp; + + x = GxICR(irq); + GxICR(irq) = x & GxICR_LEVEL; + tmp = GxICR(irq); + + new = any_online_cpu(irq_desc[irq].affinity); + irq_affinity_online[irq] = new; + + CROSS_GxICR(irq, new) = + (x & GxICR_LEVEL) | GxICR_DETECT; + tmp = CROSS_GxICR(irq, new); + + x &= GxICR_LEVEL | GxICR_ENABLE; + if (GxICR(irq) & GxICR_REQUEST) { + x |= GxICR_REQUEST | GxICR_DETECT; + CROSS_GxICR(irq, new) = x; + tmp = CROSS_GxICR(irq, new); + } + arch_local_irq_restore(flags); + } +} +#endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/mn10300/kernel/kprobes.c b/arch/mn10300/kernel/kprobes.c index 67e6389d625a..0311a7fcea16 100644 --- a/arch/mn10300/kernel/kprobes.c +++ b/arch/mn10300/kernel/kprobes.c @@ -377,8 +377,10 @@ void __kprobes arch_arm_kprobe(struct kprobe *p) void __kprobes arch_disarm_kprobe(struct kprobe *p) { +#ifndef CONFIG_MN10300_CACHE_SNOOP mn10300_dcache_flush(); mn10300_icache_inv(); +#endif } void arch_remove_kprobe(struct kprobe *p) @@ -390,8 +392,10 @@ void __kprobes disarm_kprobe(struct kprobe *p, struct pt_regs *regs) { *p->addr = p->opcode; regs->pc = (unsigned long) p->addr; +#ifndef CONFIG_MN10300_CACHE_SNOOP mn10300_dcache_flush(); mn10300_icache_inv(); +#endif } static inline diff --git a/arch/mn10300/kernel/mn10300-serial-low.S b/arch/mn10300/kernel/mn10300-serial-low.S index 66702d256610..dfc1b6f2fa9a 100644 --- a/arch/mn10300/kernel/mn10300-serial-low.S +++ b/arch/mn10300/kernel/mn10300-serial-low.S @@ -39,7 +39,7 @@ ############################################################################### .balign L1_CACHE_BYTES ENTRY(mn10300_serial_vdma_interrupt) - or EPSW_IE,psw # permit overriding by +# or EPSW_IE,psw # permit overriding by # debugging interrupts movm [d2,d3,a2,a3,exreg0],(sp) @@ -164,7 +164,7 @@ mnsc_vdma_tx_noint: rti mnsc_vdma_tx_empty: - mov +(GxICR_LEVEL_1|GxICR_DETECT),d2 + mov +(NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL)|GxICR_DETECT),d2 movhu d2,(e3) # disable the interrupt movhu (e3),d2 # flush @@ -175,7 +175,7 @@ mnsc_vdma_tx_break: movhu (SCxCTR,e2),d2 # turn on break mode or SC01CTR_BKE,d2 movhu d2,(SCxCTR,e2) - mov +(GxICR_LEVEL_1|GxICR_DETECT),d2 + mov +(NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL)|GxICR_DETECT),d2 movhu d2,(e3) # disable transmit interrupts on this # channel movhu (e3),d2 # flush diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c index db509dd80565..996384dba45d 100644 --- a/arch/mn10300/kernel/mn10300-serial.c +++ b/arch/mn10300/kernel/mn10300-serial.c @@ -44,6 +44,11 @@ static const char serial_revdate[] = "2007-11-06"; #include #include "mn10300-serial.h" +#ifdef CONFIG_SMP +#undef GxICR +#define GxICR(X) CROSS_GxICR(X, 0) +#endif /* CONFIG_SMP */ + #define kenter(FMT, ...) \ printk(KERN_DEBUG "-->%s(" FMT ")\n", __func__, ##__VA_ARGS__) #define _enter(FMT, ...) \ @@ -57,6 +62,11 @@ static const char serial_revdate[] = "2007-11-06"; #define _proto(FMT, ...) \ no_printk(KERN_DEBUG "### MNSERIAL " FMT " ###\n", ##__VA_ARGS__) +#ifndef CODMSB +/* c_cflag bit meaning */ +#define CODMSB 004000000000 /* change Transfer bit-order */ +#endif + #define NR_UARTS 3 #ifdef CONFIG_MN10300_TTYSM_CONSOLE @@ -152,26 +162,35 @@ struct mn10300_serial_port mn10300_serial_port_sif0 = { .name = "ttySM0", ._iobase = &SC0CTR, ._control = &SC0CTR, - ._status = (volatile u8 *) &SC0STR, + ._status = (volatile u8 *)&SC0STR, ._intr = &SC0ICR, ._rxb = &SC0RXB, ._txb = &SC0TXB, .rx_name = "ttySM0:Rx", .tx_name = "ttySM0:Tx", -#ifdef CONFIG_MN10300_TTYSM0_TIMER8 +#if defined(CONFIG_MN10300_TTYSM0_TIMER8) .tm_name = "ttySM0:Timer8", ._tmxmd = &TM8MD, ._tmxbr = &TM8BR, ._tmicr = &TM8ICR, .tm_irq = TM8IRQ, .div_timer = MNSCx_DIV_TIMER_16BIT, -#else /* CONFIG_MN10300_TTYSM0_TIMER2 */ +#elif defined(CONFIG_MN10300_TTYSM0_TIMER0) + .tm_name = "ttySM0:Timer0", + ._tmxmd = &TM0MD, + ._tmxbr = (volatile u16 *)&TM0BR, + ._tmicr = &TM0ICR, + .tm_irq = TM0IRQ, + .div_timer = MNSCx_DIV_TIMER_8BIT, +#elif defined(CONFIG_MN10300_TTYSM0_TIMER2) .tm_name = "ttySM0:Timer2", ._tmxmd = &TM2MD, - ._tmxbr = (volatile u16 *) &TM2BR, + ._tmxbr = (volatile u16 *)&TM2BR, ._tmicr = &TM2ICR, .tm_irq = TM2IRQ, .div_timer = MNSCx_DIV_TIMER_8BIT, +#else +#error "Unknown config for ttySM0" #endif .rx_irq = SC0RXIRQ, .tx_irq = SC0TXIRQ, @@ -205,26 +224,35 @@ struct mn10300_serial_port mn10300_serial_port_sif1 = { .name = "ttySM1", ._iobase = &SC1CTR, ._control = &SC1CTR, - ._status = (volatile u8 *) &SC1STR, + ._status = (volatile u8 *)&SC1STR, ._intr = &SC1ICR, ._rxb = &SC1RXB, ._txb = &SC1TXB, .rx_name = "ttySM1:Rx", .tx_name = "ttySM1:Tx", -#ifdef CONFIG_MN10300_TTYSM1_TIMER9 +#if defined(CONFIG_MN10300_TTYSM1_TIMER9) .tm_name = "ttySM1:Timer9", ._tmxmd = &TM9MD, ._tmxbr = &TM9BR, ._tmicr = &TM9ICR, .tm_irq = TM9IRQ, .div_timer = MNSCx_DIV_TIMER_16BIT, -#else /* CONFIG_MN10300_TTYSM1_TIMER3 */ +#elif defined(CONFIG_MN10300_TTYSM1_TIMER3) .tm_name = "ttySM1:Timer3", ._tmxmd = &TM3MD, - ._tmxbr = (volatile u16 *) &TM3BR, + ._tmxbr = (volatile u16 *)&TM3BR, ._tmicr = &TM3ICR, .tm_irq = TM3IRQ, .div_timer = MNSCx_DIV_TIMER_8BIT, +#elif defined(CONFIG_MN10300_TTYSM1_TIMER12) + .tm_name = "ttySM1/Timer12", + ._tmxmd = &TM12MD, + ._tmxbr = &TM12BR, + ._tmicr = &TM12ICR, + .tm_irq = TM12IRQ, + .div_timer = MNSCx_DIV_TIMER_16BIT, +#else +#error "Unknown config for ttySM1" #endif .rx_irq = SC1RXIRQ, .tx_irq = SC1TXIRQ, @@ -260,20 +288,45 @@ struct mn10300_serial_port mn10300_serial_port_sif2 = { .uart.lock = __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif2.uart.lock), .name = "ttySM2", - .rx_name = "ttySM2:Rx", - .tx_name = "ttySM2:Tx", - .tm_name = "ttySM2:Timer10", ._iobase = &SC2CTR, ._control = &SC2CTR, - ._status = &SC2STR, + ._status = (volatile u8 *)&SC2STR, ._intr = &SC2ICR, ._rxb = &SC2RXB, ._txb = &SC2TXB, + .rx_name = "ttySM2:Rx", + .tx_name = "ttySM2:Tx", +#if defined(CONFIG_MN10300_TTYSM2_TIMER10) + .tm_name = "ttySM2/Timer10", ._tmxmd = &TM10MD, ._tmxbr = &TM10BR, ._tmicr = &TM10ICR, .tm_irq = TM10IRQ, .div_timer = MNSCx_DIV_TIMER_16BIT, +#elif defined(CONFIG_MN10300_TTYSM2_TIMER9) + .tm_name = "ttySM2/Timer9", + ._tmxmd = &TM9MD, + ._tmxbr = &TM9BR, + ._tmicr = &TM9ICR, + .tm_irq = TM9IRQ, + .div_timer = MNSCx_DIV_TIMER_16BIT, +#elif defined(CONFIG_MN10300_TTYSM2_TIMER1) + .tm_name = "ttySM2/Timer1", + ._tmxmd = &TM1MD, + ._tmxbr = (volatile u16 *)&TM1BR, + ._tmicr = &TM1ICR, + .tm_irq = TM1IRQ, + .div_timer = MNSCx_DIV_TIMER_8BIT, +#elif defined(CONFIG_MN10300_TTYSM2_TIMER3) + .tm_name = "ttySM2/Timer3", + ._tmxmd = &TM3MD, + ._tmxbr = (volatile u16 *)&TM3BR, + ._tmicr = &TM3ICR, + .tm_irq = TM3IRQ, + .div_timer = MNSCx_DIV_TIMER_8BIT, +#else +#error "Unknown config for ttySM2" +#endif .rx_irq = SC2RXIRQ, .tx_irq = SC2TXIRQ, .rx_icr = &GxICR(SC2RXIRQ), @@ -322,9 +375,13 @@ struct mn10300_serial_port *mn10300_serial_ports[NR_UARTS + 1] = { */ static void mn10300_serial_mask_ack(unsigned int irq) { + unsigned long flags; u16 tmp; + + flags = arch_local_cli_save(); GxICR(irq) = GxICR_LEVEL_6; tmp = GxICR(irq); /* flush write buffer */ + arch_local_irq_restore(flags); } static void mn10300_serial_nop(unsigned int irq) @@ -348,23 +405,36 @@ struct mn10300_serial_int mn10300_serial_int_tbl[NR_IRQS]; static void mn10300_serial_dis_tx_intr(struct mn10300_serial_port *port) { + unsigned long flags; u16 x; - *port->tx_icr = GxICR_LEVEL_1 | GxICR_DETECT; + + flags = arch_local_cli_save(); + *port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); x = *port->tx_icr; + arch_local_irq_restore(flags); } static void mn10300_serial_en_tx_intr(struct mn10300_serial_port *port) { + unsigned long flags; u16 x; - *port->tx_icr = GxICR_LEVEL_1 | GxICR_ENABLE; + + flags = arch_local_cli_save(); + *port->tx_icr = + NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL) | GxICR_ENABLE; x = *port->tx_icr; + arch_local_irq_restore(flags); } static void mn10300_serial_dis_rx_intr(struct mn10300_serial_port *port) { + unsigned long flags; u16 x; - *port->rx_icr = GxICR_LEVEL_1 | GxICR_DETECT; + + flags = arch_local_cli_save(); + *port->rx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); x = *port->rx_icr; + arch_local_irq_restore(flags); } /* @@ -650,7 +720,7 @@ static unsigned int mn10300_serial_tx_empty(struct uart_port *_port) static void mn10300_serial_set_mctrl(struct uart_port *_port, unsigned int mctrl) { - struct mn10300_serial_port *port = + struct mn10300_serial_port *port __attribute__ ((unused)) = container_of(_port, struct mn10300_serial_port, uart); _enter("%s,%x", port->name, mctrl); @@ -706,6 +776,7 @@ static void mn10300_serial_start_tx(struct uart_port *_port) UART_XMIT_SIZE)); /* kick the virtual DMA controller */ + arch_local_cli(); x = *port->tx_icr; x |= GxICR_ENABLE; @@ -716,10 +787,14 @@ static void mn10300_serial_start_tx(struct uart_port *_port) _debug("CTR=%04hx ICR=%02hx STR=%04x TMD=%02hx TBR=%04hx ICR=%04hx", *port->_control, *port->_intr, *port->_status, - *port->_tmxmd, *port->_tmxbr, *port->tx_icr); + *port->_tmxmd, + (port->div_timer == MNSCx_DIV_TIMER_8BIT) ? + *(volatile u8 *)port->_tmxbr : *port->_tmxbr, + *port->tx_icr); *port->tx_icr = x; x = *port->tx_icr; + arch_local_sti(); } /* @@ -842,8 +917,10 @@ static int mn10300_serial_startup(struct uart_port *_port) pint->port = port; pint->vdma = mn10300_serial_vdma_tx_handler; - set_intr_level(port->rx_irq, GxICR_LEVEL_1); - set_intr_level(port->tx_irq, GxICR_LEVEL_1); + set_intr_level(port->rx_irq, + NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL)); + set_intr_level(port->tx_irq, + NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL)); set_irq_chip(port->tm_irq, &mn10300_serial_pic); if (request_irq(port->rx_irq, mn10300_serial_interrupt, @@ -876,6 +953,7 @@ error: */ static void mn10300_serial_shutdown(struct uart_port *_port) { + u16 x; struct mn10300_serial_port *port = container_of(_port, struct mn10300_serial_port, uart); @@ -897,8 +975,12 @@ static void mn10300_serial_shutdown(struct uart_port *_port) free_irq(port->rx_irq, port); free_irq(port->tx_irq, port); - *port->rx_icr = GxICR_LEVEL_1; - *port->tx_icr = GxICR_LEVEL_1; + arch_local_cli(); + *port->rx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); + x = *port->rx_icr; + *port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); + x = *port->tx_icr; + arch_local_sti(); } /* @@ -947,11 +1029,66 @@ static void mn10300_serial_change_speed(struct mn10300_serial_port *port, /* Determine divisor based on baud rate */ battempt = 0; - if (div_timer == MNSCx_DIV_TIMER_16BIT) - scxctr |= SC0CTR_CK_TM8UFLOW_8; /* ( == SC1CTR_CK_TM9UFLOW_8 - * == SC2CTR_CK_TM10UFLOW) */ - else if (div_timer == MNSCx_DIV_TIMER_8BIT) + switch (port->uart.line) { +#ifdef CONFIG_MN10300_TTYSM0 + case 0: /* ttySM0 */ +#if defined(CONFIG_MN10300_TTYSM0_TIMER8) + scxctr |= SC0CTR_CK_TM8UFLOW_8; +#elif defined(CONFIG_MN10300_TTYSM0_TIMER0) + scxctr |= SC0CTR_CK_TM0UFLOW_8; +#elif defined(CONFIG_MN10300_TTYSM0_TIMER2) scxctr |= SC0CTR_CK_TM2UFLOW_8; +#else +#error "Unknown config for ttySM0" +#endif + break; +#endif /* CONFIG_MN10300_TTYSM0 */ + +#ifdef CONFIG_MN10300_TTYSM1 + case 1: /* ttySM1 */ +#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3) +#if defined(CONFIG_MN10300_TTYSM1_TIMER9) + scxctr |= SC1CTR_CK_TM9UFLOW_8; +#elif defined(CONFIG_MN10300_TTYSM1_TIMER3) + scxctr |= SC1CTR_CK_TM3UFLOW_8; +#else +#error "Unknown config for ttySM1" +#endif +#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */ +#if defined(CONFIG_MN10300_TTYSM1_TIMER12) + scxctr |= SC1CTR_CK_TM12UFLOW_8; +#else +#error "Unknown config for ttySM1" +#endif +#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */ + break; +#endif /* CONFIG_MN10300_TTYSM1 */ + +#ifdef CONFIG_MN10300_TTYSM2 + case 2: /* ttySM2 */ +#if defined(CONFIG_AM33_2) +#if defined(CONFIG_MN10300_TTYSM2_TIMER10) + scxctr |= SC2CTR_CK_TM10UFLOW; +#else +#error "Unknown config for ttySM2" +#endif +#else /* CONFIG_AM33_2 */ +#if defined(CONFIG_MN10300_TTYSM2_TIMER9) + scxctr |= SC2CTR_CK_TM9UFLOW_8; +#elif defined(CONFIG_MN10300_TTYSM2_TIMER1) + scxctr |= SC2CTR_CK_TM1UFLOW_8; +#elif defined(CONFIG_MN10300_TTYSM2_TIMER3) + scxctr |= SC2CTR_CK_TM3UFLOW_8; +#else +#error "Unknown config for ttySM2" +#endif +#endif /* CONFIG_AM33_2 */ + break; +#endif /* CONFIG_MN10300_TTYSM2 */ + + default: + break; + } try_alternative: baud = uart_get_baud_rate(&port->uart, new, old, 0, @@ -1195,6 +1332,12 @@ static void mn10300_serial_set_termios(struct uart_port *_port, ctr &= ~SC2CTR_TWE; *port->_control = ctr; } + + /* change Transfer bit-order (LSB/MSB) */ + if (new->c_cflag & CODMSB) + *port->_control |= SC01CTR_OD_MSBFIRST; /* MSB MODE */ + else + *port->_control &= ~SC01CTR_OD_MSBFIRST; /* LSB MODE */ } /* @@ -1302,11 +1445,16 @@ static int __init mn10300_serial_init(void) printk(KERN_INFO "%s version %s (%s)\n", serial_name, serial_version, serial_revdate); -#ifdef CONFIG_MN10300_TTYSM2 - SC2TIM = 8; /* make the baud base of timer 2 IOCLK/8 */ +#if defined(CONFIG_MN10300_TTYSM2) && defined(CONFIG_AM33_2) + { + int tmp; + SC2TIM = 8; /* make the baud base of timer 2 IOCLK/8 */ + tmp = SC2TIM; + } #endif - set_intr_stub(EXCEP_IRQ_LEVEL1, mn10300_serial_vdma_interrupt); + set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL), + mn10300_serial_vdma_interrupt); ret = uart_register_driver(&mn10300_serial_driver); if (!ret) { @@ -1366,9 +1514,11 @@ static void mn10300_serial_console_write(struct console *co, port = mn10300_serial_ports[co->index]; /* firstly hijack the serial port from the "virtual DMA" controller */ + arch_local_cli(); txicr = *port->tx_icr; - *port->tx_icr = GxICR_LEVEL_1; + *port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); tmp = *port->tx_icr; + arch_local_sti(); /* the transmitter may be disabled */ scxctr = *port->_control; @@ -1422,8 +1572,10 @@ static void mn10300_serial_console_write(struct console *co, if (!(scxctr & SC01CTR_TXE)) *port->_control = scxctr; + arch_local_cli(); *port->tx_icr = txicr; tmp = *port->tx_icr; + arch_local_sti(); } /* diff --git a/arch/mn10300/kernel/mn10300-watchdog-low.S b/arch/mn10300/kernel/mn10300-watchdog-low.S index 996244745cca..f2f5c9cfaabd 100644 --- a/arch/mn10300/kernel/mn10300-watchdog-low.S +++ b/arch/mn10300/kernel/mn10300-watchdog-low.S @@ -16,6 +16,7 @@ #include #include #include +#include .text @@ -53,7 +54,13 @@ watchdog_handler: .type touch_nmi_watchdog,@function touch_nmi_watchdog: clr d0 - mov d0,(watchdog_alert_counter) + clr d1 + mov watchdog_alert_counter, a0 + setlb + mov d0, (a0+) + inc d1 + cmp NR_CPUS, d1 + lne ret [],0 .size touch_nmi_watchdog,.-touch_nmi_watchdog diff --git a/arch/mn10300/kernel/mn10300-watchdog.c b/arch/mn10300/kernel/mn10300-watchdog.c index f362d9d138f1..c5e12bfd9fcd 100644 --- a/arch/mn10300/kernel/mn10300-watchdog.c +++ b/arch/mn10300/kernel/mn10300-watchdog.c @@ -30,7 +30,7 @@ static DEFINE_SPINLOCK(watchdog_print_lock); static unsigned int watchdog; static unsigned int watchdog_hz = 1; -unsigned int watchdog_alert_counter; +unsigned int watchdog_alert_counter[NR_CPUS]; EXPORT_SYMBOL(touch_nmi_watchdog); @@ -39,9 +39,6 @@ EXPORT_SYMBOL(touch_nmi_watchdog); * is to check its timer makes IRQ counts. If they are not * changing then that CPU has some problem. * - * as these watchdog NMI IRQs are generated on every CPU, we only - * have to check the current processor. - * * since NMIs dont listen to _any_ locks, we have to be extremely * careful not to rely on unsafe variables. The printk might lock * up though, so we have to break up any console locks first ... @@ -69,8 +66,8 @@ int __init check_watchdog(void) printk(KERN_INFO "OK.\n"); - /* now that we know it works we can reduce NMI frequency to - * something more reasonable; makes a difference in some configs + /* now that we know it works we can reduce NMI frequency to something + * more reasonable; makes a difference in some configs */ watchdog_hz = 1; @@ -121,15 +118,22 @@ void __init watchdog_go(void) } } +#ifdef CONFIG_SMP +static void watchdog_dump_register(void *dummy) +{ + printk(KERN_ERR "--- Register Dump (CPU%d) ---\n", CPUID); + show_registers(current_frame()); +} +#endif + asmlinkage void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep) { - /* * Since current-> is always on the stack, and we always switch * the stack NMI-atomically, it's safe to use smp_processor_id(). */ - int sum, cpu = smp_processor_id(); + int sum, cpu; int irq = NMIIRQ; u8 wdt, tmp; @@ -138,43 +142,61 @@ void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep) tmp = WDCTR; NMICR = NMICR_WDIF; - nmi_count(cpu)++; + nmi_count(smp_processor_id())++; kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); - sum = irq_stat[cpu].__irq_count; - - if (last_irq_sums[cpu] == sum) { - /* - * Ayiee, looks like this CPU is stuck ... - * wait a few IRQs (5 seconds) before doing the oops ... - */ - watchdog_alert_counter++; - if (watchdog_alert_counter == 5 * watchdog_hz) { - spin_lock(&watchdog_print_lock); + + for_each_online_cpu(cpu) { + + sum = irq_stat[cpu].__irq_count; + + if ((last_irq_sums[cpu] == sum) +#if defined(CONFIG_GDBSTUB) && defined(CONFIG_SMP) + && !(CHK_GDBSTUB_BUSY() + || atomic_read(&cpu_doing_single_step)) +#endif + ) { /* - * We are in trouble anyway, lets at least try - * to get a message out. + * Ayiee, looks like this CPU is stuck ... + * wait a few IRQs (5 seconds) before doing the oops ... */ - bust_spinlocks(1); - printk(KERN_ERR - "NMI Watchdog detected LOCKUP on CPU%d," - " pc %08lx, registers:\n", - cpu, regs->pc); - show_registers(regs); - printk("console shuts up ...\n"); - console_silent(); - spin_unlock(&watchdog_print_lock); - bust_spinlocks(0); + watchdog_alert_counter[cpu]++; + if (watchdog_alert_counter[cpu] == 5 * watchdog_hz) { + spin_lock(&watchdog_print_lock); + /* + * We are in trouble anyway, lets at least try + * to get a message out. + */ + bust_spinlocks(1); + printk(KERN_ERR + "NMI Watchdog detected LOCKUP on CPU%d," + " pc %08lx, registers:\n", + cpu, regs->pc); +#ifdef CONFIG_SMP + printk(KERN_ERR + "--- Register Dump (CPU%d) ---\n", + CPUID); +#endif + show_registers(regs); +#ifdef CONFIG_SMP + smp_nmi_call_function(watchdog_dump_register, + NULL, 1); +#endif + printk(KERN_NOTICE "console shuts up ...\n"); + console_silent(); + spin_unlock(&watchdog_print_lock); + bust_spinlocks(0); #ifdef CONFIG_GDBSTUB - if (gdbstub_busy) - gdbstub_exception(regs, excep); - else - gdbstub_intercept(regs, excep); + if (CHK_GDBSTUB_BUSY_AND_ACTIVE()) + gdbstub_exception(regs, excep); + else + gdbstub_intercept(regs, excep); #endif - do_exit(SIGSEGV); + do_exit(SIGSEGV); + } + } else { + last_irq_sums[cpu] = sum; + watchdog_alert_counter[cpu] = 0; } - } else { - last_irq_sums[cpu] = sum; - watchdog_alert_counter = 0; } WDCTR = wdt | WDCTR_WDRST; diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c index f48373e2bc1c..0d0f8049a17b 100644 --- a/arch/mn10300/kernel/process.c +++ b/arch/mn10300/kernel/process.c @@ -57,6 +57,7 @@ unsigned long thread_saved_pc(struct task_struct *tsk) void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); +#if !defined(CONFIG_SMP) || defined(CONFIG_HOTPLUG_CPU) /* * we use this if we don't have any better idle routine */ @@ -69,6 +70,35 @@ static void default_idle(void) local_irq_enable(); } +#else /* !CONFIG_SMP || CONFIG_HOTPLUG_CPU */ +/* + * On SMP it's slightly faster (but much more power-consuming!) + * to poll the ->work.need_resched flag instead of waiting for the + * cross-CPU IPI to arrive. Use this option with caution. + */ +static inline void poll_idle(void) +{ + int oldval; + + local_irq_enable(); + + /* + * Deal with another CPU just having chosen a thread to + * run here: + */ + oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); + + if (!oldval) { + set_thread_flag(TIF_POLLING_NRFLAG); + while (!need_resched()) + cpu_relax(); + clear_thread_flag(TIF_POLLING_NRFLAG); + } else { + set_need_resched(); + } +} +#endif /* !CONFIG_SMP || CONFIG_HOTPLUG_CPU */ + /* * the idle thread * - there's no useful work to be done, so just try to conserve power and have @@ -77,8 +107,6 @@ static void default_idle(void) */ void cpu_idle(void) { - int cpu = smp_processor_id(); - /* endless idle loop with no priority at all */ for (;;) { while (!need_resched()) { @@ -86,10 +114,13 @@ void cpu_idle(void) smp_rmb(); idle = pm_idle; - if (!idle) + if (!idle) { +#if defined(CONFIG_SMP) && !defined(CONFIG_HOTPLUG_CPU) + idle = poll_idle; +#else /* CONFIG_SMP && !CONFIG_HOTPLUG_CPU */ idle = default_idle; - - irq_stat[cpu].idle_timestamp = jiffies; +#endif /* CONFIG_SMP && !CONFIG_HOTPLUG_CPU */ + } idle(); } @@ -197,6 +228,7 @@ int copy_thread(unsigned long clone_flags, unsigned long c_usp, unsigned long ustk_size, struct task_struct *p, struct pt_regs *kregs) { + struct thread_info *ti = task_thread_info(p); struct pt_regs *c_uregs, *c_kregs, *uregs; unsigned long c_ksp; @@ -217,7 +249,7 @@ int copy_thread(unsigned long clone_flags, /* the new TLS pointer is passed in as arg #5 to sys_clone() */ if (clone_flags & CLONE_SETTLS) - c_uregs->e2 = __frame->d3; + c_uregs->e2 = current_frame()->d3; /* set up the return kernel frame if called from kernel_thread() */ c_kregs = c_uregs; @@ -235,7 +267,7 @@ int copy_thread(unsigned long clone_flags, } /* set up things up so the scheduler can start the new task */ - p->thread.__frame = c_kregs; + ti->frame = c_kregs; p->thread.a3 = (unsigned long) c_kregs; p->thread.sp = c_ksp; p->thread.pc = (unsigned long) ret_from_fork; @@ -247,25 +279,26 @@ int copy_thread(unsigned long clone_flags, /* * clone a process - * - tlsptr is retrieved by copy_thread() from __frame->d3 + * - tlsptr is retrieved by copy_thread() from current_frame()->d3 */ asmlinkage long sys_clone(unsigned long clone_flags, unsigned long newsp, int __user *parent_tidptr, int __user *child_tidptr, int __user *tlsptr) { - return do_fork(clone_flags, newsp ?: __frame->sp, __frame, 0, - parent_tidptr, child_tidptr); + return do_fork(clone_flags, newsp ?: current_frame()->sp, + current_frame(), 0, parent_tidptr, child_tidptr); } asmlinkage long sys_fork(void) { - return do_fork(SIGCHLD, __frame->sp, __frame, 0, NULL, NULL); + return do_fork(SIGCHLD, current_frame()->sp, + current_frame(), 0, NULL, NULL); } asmlinkage long sys_vfork(void) { - return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, __frame->sp, __frame, - 0, NULL, NULL); + return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, current_frame()->sp, + current_frame(), 0, NULL, NULL); } asmlinkage long sys_execve(const char __user *name, @@ -279,7 +312,7 @@ asmlinkage long sys_execve(const char __user *name, error = PTR_ERR(filename); if (IS_ERR(filename)) return error; - error = do_execve(filename, argv, envp, __frame); + error = do_execve(filename, argv, envp, current_frame()); putname(filename); return error; } diff --git a/arch/mn10300/kernel/profile.c b/arch/mn10300/kernel/profile.c index 20d7d0306b16..4f342f75d00c 100644 --- a/arch/mn10300/kernel/profile.c +++ b/arch/mn10300/kernel/profile.c @@ -41,7 +41,7 @@ static __init int profile_init(void) tmp = TM11ICR; printk(KERN_INFO "Profiling initiated on timer 11, priority 0, %uHz\n", - mn10300_ioclk / 8 / (TM11BR + 1)); + MN10300_IOCLK / 8 / (TM11BR + 1)); printk(KERN_INFO "Profile histogram stored %p-%p\n", prof_buffer, (u8 *)(prof_buffer + prof_len) - 1); diff --git a/arch/mn10300/kernel/rtc.c b/arch/mn10300/kernel/rtc.c index 4eef0e7224f6..e9e20f9a4dd3 100644 --- a/arch/mn10300/kernel/rtc.c +++ b/arch/mn10300/kernel/rtc.c @@ -20,18 +20,22 @@ DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); -/* time for RTC to update itself in ioclks */ -static unsigned long mn10300_rtc_update_period; - +/* + * Read the current RTC time + */ void read_persistent_clock(struct timespec *ts) { struct rtc_time tm; get_rtc_time(&tm); - ts->tv_sec = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday, - tm.tm_hour, tm.tm_min, tm.tm_sec); ts->tv_nsec = 0; + ts->tv_sec = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec); + + /* if rtc is way off in the past, set something reasonable */ + if (ts->tv_sec < 0) + ts->tv_sec = mktime(2009, 1, 1, 12, 0, 0); } /* @@ -115,39 +119,14 @@ int update_persistent_clock(struct timespec now) */ void __init calibrate_clock(void) { - unsigned long count0, counth, count1; unsigned char status; /* make sure the RTC is running and is set to operate in 24hr mode */ status = RTSRC; RTCRB |= RTCRB_SET; RTCRB |= RTCRB_TM_24HR; + RTCRB &= ~RTCRB_DM_BINARY; RTCRA |= RTCRA_DVR; RTCRA &= ~RTCRA_DVR; RTCRB &= ~RTCRB_SET; - - /* work out the clock speed by counting clock cycles between ends of - * the RTC update cycle - track the RTC through one complete update - * cycle (1 second) - */ - startup_timestamp_counter(); - - while (!(RTCRA & RTCRA_UIP)) {} - while ((RTCRA & RTCRA_UIP)) {} - - count0 = TMTSCBC; - - while (!(RTCRA & RTCRA_UIP)) {} - - counth = TMTSCBC; - - while ((RTCRA & RTCRA_UIP)) {} - - count1 = TMTSCBC; - - shutdown_timestamp_counter(); - - MN10300_TSCCLK = count0 - count1; /* the timers count down */ - mn10300_rtc_update_period = counth - count1; - MN10300_TSC_PER_HZ = MN10300_TSCCLK / HZ; } diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c index d464affcba0e..9e7a3209a3e1 100644 --- a/arch/mn10300/kernel/setup.c +++ b/arch/mn10300/kernel/setup.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -30,7 +31,6 @@ #include #include #include -#include #include #include @@ -64,11 +64,13 @@ unsigned long memory_size; struct thread_info *__current_ti = &init_thread_union.thread_info; struct task_struct *__current = &init_task; -#define mn10300_known_cpus 3 +#define mn10300_known_cpus 5 static const char *const mn10300_cputypes[] = { - "am33v1", - "am33v2", - "am34v1", + "am33-1", + "am33-2", + "am34-1", + "am33-3", + "am34-2", "unknown" }; @@ -123,6 +125,7 @@ void __init setup_arch(char **cmdline_p) cpu_init(); unit_setup(); + smp_init_cpus(); parse_mem_cmdline(cmdline_p); init_mm.start_code = (unsigned long)&_text; @@ -179,57 +182,55 @@ void __init setup_arch(char **cmdline_p) void __init cpu_init(void) { unsigned long cpurev = CPUREV, type; - unsigned long base, size; type = (CPUREV & CPUREV_TYPE) >> CPUREV_TYPE_S; if (type > mn10300_known_cpus) type = mn10300_known_cpus; - printk(KERN_INFO "Matsushita %s, rev %ld\n", + printk(KERN_INFO "Panasonic %s, rev %ld\n", mn10300_cputypes[type], (cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S); - /* determine the memory size and base from the memory controller regs */ - memory_size = 0; - - base = SDBASE(0); - if (base & SDBASE_CE) { - size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT; - size = ~size + 1; - base &= SDBASE_CBA; + get_mem_info(&phys_memory_base, &memory_size); + phys_memory_end = phys_memory_base + memory_size; - printk(KERN_INFO "SDRAM[0]: %luMb @%08lx\n", size >> 20, base); - memory_size += size; - phys_memory_base = base; - } + fpu_init_state(); +} - base = SDBASE(1); - if (base & SDBASE_CE) { - size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT; - size = ~size + 1; - base &= SDBASE_CBA; +static struct cpu cpu_devices[NR_CPUS]; - printk(KERN_INFO "SDRAM[1]: %luMb @%08lx\n", size >> 20, base); - memory_size += size; - if (phys_memory_base == 0) - phys_memory_base = base; - } +static int __init topology_init(void) +{ + int i; - phys_memory_end = phys_memory_base + memory_size; + for_each_present_cpu(i) + register_cpu(&cpu_devices[i], i); -#ifdef CONFIG_FPU - fpu_init_state(); -#endif + return 0; } +subsys_initcall(topology_init); + /* * Get CPU information for use by the procfs. */ static int show_cpuinfo(struct seq_file *m, void *v) { +#ifdef CONFIG_SMP + struct mn10300_cpuinfo *c = v; + unsigned long cpu_id = c - cpu_data; + unsigned long cpurev = c->type, type, icachesz, dcachesz; +#else /* CONFIG_SMP */ + unsigned long cpu_id = 0; unsigned long cpurev = CPUREV, type, icachesz, dcachesz; +#endif /* CONFIG_SMP */ - type = (CPUREV & CPUREV_TYPE) >> CPUREV_TYPE_S; +#ifdef CONFIG_SMP + if (!cpu_online(cpu_id)) + return 0; +#endif + + type = (cpurev & CPUREV_TYPE) >> CPUREV_TYPE_S; if (type > mn10300_known_cpus) type = mn10300_known_cpus; @@ -244,13 +245,14 @@ static int show_cpuinfo(struct seq_file *m, void *v) 1024; seq_printf(m, - "processor : 0\n" - "vendor_id : Matsushita\n" + "processor : %ld\n" + "vendor_id : " PROCESSOR_VENDOR_NAME "\n" "cpu core : %s\n" "cpu rev : %lu\n" "model name : " PROCESSOR_MODEL_NAME "\n" "icache size: %lu\n" "dcache size: %lu\n", + cpu_id, mn10300_cputypes[type], (cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S, icachesz, @@ -262,8 +264,13 @@ static int show_cpuinfo(struct seq_file *m, void *v) "bogomips : %lu.%02lu\n\n", MN10300_IOCLK / 1000000, (MN10300_IOCLK / 10000) % 100, +#ifdef CONFIG_SMP + c->loops_per_jiffy / (500000 / HZ), + (c->loops_per_jiffy / (5000 / HZ)) % 100 +#else /* CONFIG_SMP */ loops_per_jiffy / (500000 / HZ), (loops_per_jiffy / (5000 / HZ)) % 100 +#endif /* CONFIG_SMP */ ); return 0; diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c index d4de05ab7864..690f4e9507d7 100644 --- a/arch/mn10300/kernel/signal.c +++ b/arch/mn10300/kernel/signal.c @@ -91,7 +91,7 @@ asmlinkage long sys_sigaction(int sig, */ asmlinkage long sys_sigaltstack(const stack_t __user *uss, stack_t *uoss) { - return do_sigaltstack(uss, uoss, __frame->sp); + return do_sigaltstack(uss, uoss, current_frame()->sp); } /* @@ -156,10 +156,11 @@ badframe: */ asmlinkage long sys_sigreturn(void) { - struct sigframe __user *frame = (struct sigframe __user *) __frame->sp; + struct sigframe __user *frame; sigset_t set; long d0; + frame = (struct sigframe __user *) current_frame()->sp; if (verify_area(VERIFY_READ, frame, sizeof(*frame))) goto badframe; if (__get_user(set.sig[0], &frame->sc.oldmask)) @@ -176,7 +177,7 @@ asmlinkage long sys_sigreturn(void) recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - if (restore_sigcontext(__frame, &frame->sc, &d0)) + if (restore_sigcontext(current_frame(), &frame->sc, &d0)) goto badframe; return d0; @@ -191,11 +192,11 @@ badframe: */ asmlinkage long sys_rt_sigreturn(void) { - struct rt_sigframe __user *frame = - (struct rt_sigframe __user *) __frame->sp; + struct rt_sigframe __user *frame; sigset_t set; - unsigned long d0; + long d0; + frame = (struct rt_sigframe __user *) current_frame()->sp; if (verify_area(VERIFY_READ, frame, sizeof(*frame))) goto badframe; if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) @@ -207,10 +208,11 @@ asmlinkage long sys_rt_sigreturn(void) recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - if (restore_sigcontext(__frame, &frame->uc.uc_mcontext, &d0)) + if (restore_sigcontext(current_frame(), &frame->uc.uc_mcontext, &d0)) goto badframe; - if (do_sigaltstack(&frame->uc.uc_stack, NULL, __frame->sp) == -EFAULT) + if (do_sigaltstack(&frame->uc.uc_stack, NULL, current_frame()->sp) == + -EFAULT) goto badframe; return d0; @@ -572,7 +574,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags) if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); - tracehook_notify_resume(__frame); + tracehook_notify_resume(current_frame()); if (current->replacement_session_keyring) key_replace_session_keyring(); } diff --git a/arch/mn10300/kernel/smp-low.S b/arch/mn10300/kernel/smp-low.S new file mode 100644 index 000000000000..72938cefc05e --- /dev/null +++ b/arch/mn10300/kernel/smp-low.S @@ -0,0 +1,97 @@ +/* SMP IPI low-level handler + * + * Copyright (C) 2006-2007 Matsushita Electric Industrial Co., Ltd. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + + .am33_2 + +############################################################################### +# +# IPI interrupt handler +# +############################################################################### + .globl mn10300_low_ipi_handler +mn10300_low_ipi_handler: + add -4,sp + mov d0,(sp) + movhu (IAGR),d0 + and IAGR_GN,d0 + lsr 0x2,d0 +#ifdef CONFIG_MN10300_CACHE_ENABLED + cmp FLUSH_CACHE_IPI,d0 + beq mn10300_flush_cache_ipi +#endif + cmp SMP_BOOT_IRQ,d0 + beq mn10300_smp_boot_ipi + /* OTHERS */ + mov (sp),d0 + add 4,sp +#ifdef CONFIG_GDBSTUB + jmp gdbstub_io_rx_handler +#else + jmp end +#endif + +############################################################################### +# +# Cache flush IPI interrupt handler +# +############################################################################### +#ifdef CONFIG_MN10300_CACHE_ENABLED +mn10300_flush_cache_ipi: + mov (sp),d0 + add 4,sp + + /* FLUSH_CACHE_IPI */ + add -4,sp + SAVE_ALL + mov GxICR_DETECT,d2 + movbu d2,(GxICR(FLUSH_CACHE_IPI)) # ACK the interrupt + movhu (GxICR(FLUSH_CACHE_IPI)),d2 + call smp_cache_interrupt[],0 + RESTORE_ALL + jmp end +#endif + +############################################################################### +# +# SMP boot CPU IPI interrupt handler +# +############################################################################### +mn10300_smp_boot_ipi: + /* clear interrupt */ + movhu (GxICR(SMP_BOOT_IRQ)),d0 + and ~GxICR_REQUEST,d0 + movhu d0,(GxICR(SMP_BOOT_IRQ)) + mov (sp),d0 + add 4,sp + + # get stack + mov (CPUID),a0 + add -1,a0 + add a0,a0 + add a0,a0 + mov (start_stack,a0),a0 + mov a0,sp + jmp initialize_secondary + + +# Jump here after RTI to suppress the icache lookahead +end: diff --git a/arch/mn10300/kernel/smp.c b/arch/mn10300/kernel/smp.c new file mode 100644 index 000000000000..0dcd1c686ba8 --- /dev/null +++ b/arch/mn10300/kernel/smp.c @@ -0,0 +1,1152 @@ +/* SMP support routines. + * + * Copyright (C) 2006-2008 Panasonic Corporation + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "internal.h" + +#ifdef CONFIG_HOTPLUG_CPU +#include +#include + +static unsigned long sleep_mode[NR_CPUS]; + +static void run_sleep_cpu(unsigned int cpu); +static void run_wakeup_cpu(unsigned int cpu); +#endif /* CONFIG_HOTPLUG_CPU */ + +/* + * Debug Message function + */ + +#undef DEBUG_SMP +#ifdef DEBUG_SMP +#define Dprintk(fmt, ...) printk(KERN_DEBUG fmt, ##__VA_ARGS__) +#else +#define Dprintk(fmt, ...) no_printk(KERN_DEBUG fmt, ##__VA_ARGS__) +#endif + +/* timeout value in msec for smp_nmi_call_function. zero is no timeout. */ +#define CALL_FUNCTION_NMI_IPI_TIMEOUT 0 + +/* + * Structure and data for smp_nmi_call_function(). + */ +struct nmi_call_data_struct { + smp_call_func_t func; + void *info; + cpumask_t started; + cpumask_t finished; + int wait; + char size_alignment[0] + __attribute__ ((__aligned__(SMP_CACHE_BYTES))); +} __attribute__ ((__aligned__(SMP_CACHE_BYTES))); + +static DEFINE_SPINLOCK(smp_nmi_call_lock); +static struct nmi_call_data_struct *nmi_call_data; + +/* + * Data structures and variables + */ +static cpumask_t cpu_callin_map; /* Bitmask of callin CPUs */ +static cpumask_t cpu_callout_map; /* Bitmask of callout CPUs */ +cpumask_t cpu_boot_map; /* Bitmask of boot APs */ +unsigned long start_stack[NR_CPUS - 1]; + +/* + * Per CPU parameters + */ +struct mn10300_cpuinfo cpu_data[NR_CPUS] __cacheline_aligned; + +static int cpucount; /* The count of boot CPUs */ +static cpumask_t smp_commenced_mask; +cpumask_t cpu_initialized __initdata = CPU_MASK_NONE; + +/* + * Function Prototypes + */ +static int do_boot_cpu(int); +static void smp_show_cpu_info(int cpu_id); +static void smp_callin(void); +static void smp_online(void); +static void smp_store_cpu_info(int); +static void smp_cpu_init(void); +static void smp_tune_scheduling(void); +static void send_IPI_mask(const cpumask_t *cpumask, int irq); +static void init_ipi(void); + +/* + * IPI Initialization interrupt definitions + */ +static void mn10300_ipi_disable(unsigned int irq); +static void mn10300_ipi_enable(unsigned int irq); +static void mn10300_ipi_ack(unsigned int irq); +static void mn10300_ipi_nop(unsigned int irq); + +static struct irq_chip mn10300_ipi_type = { + .name = "cpu_ipi", + .disable = mn10300_ipi_disable, + .enable = mn10300_ipi_enable, + .ack = mn10300_ipi_ack, + .eoi = mn10300_ipi_nop +}; + +static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id); +static irqreturn_t smp_call_function_interrupt(int irq, void *dev_id); + +static struct irqaction reschedule_ipi = { + .handler = smp_reschedule_interrupt, + .name = "smp reschedule IPI" +}; +static struct irqaction call_function_ipi = { + .handler = smp_call_function_interrupt, + .name = "smp call function IPI" +}; + +#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) +static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id); +static struct irqaction local_timer_ipi = { + .handler = smp_ipi_timer_interrupt, + .flags = IRQF_DISABLED, + .name = "smp local timer IPI" +}; +#endif + +/** + * init_ipi - Initialise the IPI mechanism + */ +static void init_ipi(void) +{ + unsigned long flags; + u16 tmp16; + + /* set up the reschedule IPI */ + set_irq_chip_and_handler(RESCHEDULE_IPI, + &mn10300_ipi_type, handle_percpu_irq); + setup_irq(RESCHEDULE_IPI, &reschedule_ipi); + set_intr_level(RESCHEDULE_IPI, RESCHEDULE_GxICR_LV); + mn10300_ipi_enable(RESCHEDULE_IPI); + + /* set up the call function IPI */ + set_irq_chip_and_handler(CALL_FUNC_SINGLE_IPI, + &mn10300_ipi_type, handle_percpu_irq); + setup_irq(CALL_FUNC_SINGLE_IPI, &call_function_ipi); + set_intr_level(CALL_FUNC_SINGLE_IPI, CALL_FUNCTION_GxICR_LV); + mn10300_ipi_enable(CALL_FUNC_SINGLE_IPI); + + /* set up the local timer IPI */ +#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || \ + defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) + set_irq_chip_and_handler(LOCAL_TIMER_IPI, + &mn10300_ipi_type, handle_percpu_irq); + setup_irq(LOCAL_TIMER_IPI, &local_timer_ipi); + set_intr_level(LOCAL_TIMER_IPI, LOCAL_TIMER_GxICR_LV); + mn10300_ipi_enable(LOCAL_TIMER_IPI); +#endif + +#ifdef CONFIG_MN10300_CACHE_ENABLED + /* set up the cache flush IPI */ + flags = arch_local_cli_save(); + __set_intr_stub(NUM2EXCEP_IRQ_LEVEL(FLUSH_CACHE_GxICR_LV), + mn10300_low_ipi_handler); + GxICR(FLUSH_CACHE_IPI) = FLUSH_CACHE_GxICR_LV | GxICR_DETECT; + mn10300_ipi_enable(FLUSH_CACHE_IPI); + arch_local_irq_restore(flags); +#endif + + /* set up the NMI call function IPI */ + flags = arch_local_cli_save(); + GxICR(CALL_FUNCTION_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT; + tmp16 = GxICR(CALL_FUNCTION_NMI_IPI); + arch_local_irq_restore(flags); + + /* set up the SMP boot IPI */ + flags = arch_local_cli_save(); + __set_intr_stub(NUM2EXCEP_IRQ_LEVEL(SMP_BOOT_GxICR_LV), + mn10300_low_ipi_handler); + arch_local_irq_restore(flags); +} + +/** + * mn10300_ipi_shutdown - Shut down handling of an IPI + * @irq: The IPI to be shut down. + */ +static void mn10300_ipi_shutdown(unsigned int irq) +{ + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + + tmp = GxICR(irq); + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT; + tmp = GxICR(irq); + + arch_local_irq_restore(flags); +} + +/** + * mn10300_ipi_enable - Enable an IPI + * @irq: The IPI to be enabled. + */ +static void mn10300_ipi_enable(unsigned int irq) +{ + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + + tmp = GxICR(irq); + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE; + tmp = GxICR(irq); + + arch_local_irq_restore(flags); +} + +/** + * mn10300_ipi_disable - Disable an IPI + * @irq: The IPI to be disabled. + */ +static void mn10300_ipi_disable(unsigned int irq) +{ + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + + tmp = GxICR(irq); + GxICR(irq) = tmp & GxICR_LEVEL; + tmp = GxICR(irq); + + arch_local_irq_restore(flags); +} + +/** + * mn10300_ipi_ack - Acknowledge an IPI interrupt in the PIC + * @irq: The IPI to be acknowledged. + * + * Clear the interrupt detection flag for the IPI on the appropriate interrupt + * channel in the PIC. + */ +static void mn10300_ipi_ack(unsigned int irq) +{ + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + GxICR_u8(irq) = GxICR_DETECT; + tmp = GxICR(irq); + arch_local_irq_restore(flags); +} + +/** + * mn10300_ipi_nop - Dummy IPI action + * @irq: The IPI to be acted upon. + */ +static void mn10300_ipi_nop(unsigned int irq) +{ +} + +/** + * send_IPI_mask - Send IPIs to all CPUs in list + * @cpumask: The list of CPUs to target. + * @irq: The IPI request to be sent. + * + * Send the specified IPI to all the CPUs in the list, not waiting for them to + * finish before returning. The caller is responsible for synchronisation if + * that is needed. + */ +static void send_IPI_mask(const cpumask_t *cpumask, int irq) +{ + int i; + u16 tmp; + + for (i = 0; i < NR_CPUS; i++) { + if (cpu_isset(i, *cpumask)) { + /* send IPI */ + tmp = CROSS_GxICR(irq, i); + CROSS_GxICR(irq, i) = + tmp | GxICR_REQUEST | GxICR_DETECT; + tmp = CROSS_GxICR(irq, i); /* flush write buffer */ + } + } +} + +/** + * send_IPI_self - Send an IPI to this CPU. + * @irq: The IPI request to be sent. + * + * Send the specified IPI to the current CPU. + */ +void send_IPI_self(int irq) +{ + send_IPI_mask(cpumask_of(smp_processor_id()), irq); +} + +/** + * send_IPI_allbutself - Send IPIs to all the other CPUs. + * @irq: The IPI request to be sent. + * + * Send the specified IPI to all CPUs in the system barring the current one, + * not waiting for them to finish before returning. The caller is responsible + * for synchronisation if that is needed. + */ +void send_IPI_allbutself(int irq) +{ + cpumask_t cpumask; + + cpumask = cpu_online_map; + cpu_clear(smp_processor_id(), cpumask); + send_IPI_mask(&cpumask, irq); +} + +void arch_send_call_function_ipi_mask(const struct cpumask *mask) +{ + BUG(); + /*send_IPI_mask(mask, CALL_FUNCTION_IPI);*/ +} + +void arch_send_call_function_single_ipi(int cpu) +{ + send_IPI_mask(cpumask_of(cpu), CALL_FUNC_SINGLE_IPI); +} + +/** + * smp_send_reschedule - Send reschedule IPI to a CPU + * @cpu: The CPU to target. + */ +void smp_send_reschedule(int cpu) +{ + send_IPI_mask(cpumask_of(cpu), RESCHEDULE_IPI); +} + +/** + * smp_nmi_call_function - Send a call function NMI IPI to all CPUs + * @func: The function to ask to be run. + * @info: The context data to pass to that function. + * @wait: If true, wait (atomically) until function is run on all CPUs. + * + * Send a non-maskable request to all CPUs in the system, requesting them to + * run the specified function with the given context data, and, potentially, to + * wait for completion of that function on all CPUs. + * + * Returns 0 if successful, -ETIMEDOUT if we were asked to wait, but hit the + * timeout. + */ +int smp_nmi_call_function(smp_call_func_t func, void *info, int wait) +{ + struct nmi_call_data_struct data; + unsigned long flags; + unsigned int cnt; + int cpus, ret = 0; + + cpus = num_online_cpus() - 1; + if (cpus < 1) + return 0; + + data.func = func; + data.info = info; + data.started = cpu_online_map; + cpu_clear(smp_processor_id(), data.started); + data.wait = wait; + if (wait) + data.finished = data.started; + + spin_lock_irqsave(&smp_nmi_call_lock, flags); + nmi_call_data = &data; + smp_mb(); + + /* Send a message to all other CPUs and wait for them to respond */ + send_IPI_allbutself(CALL_FUNCTION_NMI_IPI); + + /* Wait for response */ + if (CALL_FUNCTION_NMI_IPI_TIMEOUT > 0) { + for (cnt = 0; + cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT && + !cpus_empty(data.started); + cnt++) + mdelay(1); + + if (wait && cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT) { + for (cnt = 0; + cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT && + !cpus_empty(data.finished); + cnt++) + mdelay(1); + } + + if (cnt >= CALL_FUNCTION_NMI_IPI_TIMEOUT) + ret = -ETIMEDOUT; + + } else { + /* If timeout value is zero, wait until cpumask has been + * cleared */ + while (!cpus_empty(data.started)) + barrier(); + if (wait) + while (!cpus_empty(data.finished)) + barrier(); + } + + spin_unlock_irqrestore(&smp_nmi_call_lock, flags); + return ret; +} + +/** + * stop_this_cpu - Callback to stop a CPU. + * @unused: Callback context (ignored). + */ +void stop_this_cpu(void *unused) +{ + static volatile int stopflag; + unsigned long flags; + +#ifdef CONFIG_GDBSTUB + /* In case of single stepping smp_send_stop by other CPU, + * clear procindebug to avoid deadlock. + */ + atomic_set(&procindebug[smp_processor_id()], 0); +#endif /* CONFIG_GDBSTUB */ + + flags = arch_local_cli_save(); + cpu_clear(smp_processor_id(), cpu_online_map); + + while (!stopflag) + cpu_relax(); + + cpu_set(smp_processor_id(), cpu_online_map); + arch_local_irq_restore(flags); +} + +/** + * smp_send_stop - Send a stop request to all CPUs. + */ +void smp_send_stop(void) +{ + smp_nmi_call_function(stop_this_cpu, NULL, 0); +} + +/** + * smp_reschedule_interrupt - Reschedule IPI handler + * @irq: The interrupt number. + * @dev_id: The device ID. + * + * We need do nothing here, since the scheduling will be effected on our way + * back through entry.S. + * + * Returns IRQ_HANDLED to indicate we handled the interrupt successfully. + */ +static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id) +{ + /* do nothing */ + return IRQ_HANDLED; +} + +/** + * smp_call_function_interrupt - Call function IPI handler + * @irq: The interrupt number. + * @dev_id: The device ID. + * + * Returns IRQ_HANDLED to indicate we handled the interrupt successfully. + */ +static irqreturn_t smp_call_function_interrupt(int irq, void *dev_id) +{ + /* generic_smp_call_function_interrupt(); */ + generic_smp_call_function_single_interrupt(); + return IRQ_HANDLED; +} + +/** + * smp_nmi_call_function_interrupt - Non-maskable call function IPI handler + */ +void smp_nmi_call_function_interrupt(void) +{ + smp_call_func_t func = nmi_call_data->func; + void *info = nmi_call_data->info; + int wait = nmi_call_data->wait; + + /* Notify the initiating CPU that I've grabbed the data and am about to + * execute the function + */ + smp_mb(); + cpu_clear(smp_processor_id(), nmi_call_data->started); + (*func)(info); + + if (wait) { + smp_mb(); + cpu_clear(smp_processor_id(), nmi_call_data->finished); + } +} + +#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || \ + defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) +/** + * smp_ipi_timer_interrupt - Local timer IPI handler + * @irq: The interrupt number. + * @dev_id: The device ID. + * + * Returns IRQ_HANDLED to indicate we handled the interrupt successfully. + */ +static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id) +{ + return local_timer_interrupt(); +} +#endif + +void __init smp_init_cpus(void) +{ + int i; + for (i = 0; i < NR_CPUS; i++) { + set_cpu_possible(i, true); + set_cpu_present(i, true); + } +} + +/** + * smp_cpu_init - Initialise AP in start_secondary. + * + * For this Application Processor, set up init_mm, initialise FPU and set + * interrupt level 0-6 setting. + */ +static void __init smp_cpu_init(void) +{ + unsigned long flags; + int cpu_id = smp_processor_id(); + u16 tmp16; + + if (test_and_set_bit(cpu_id, &cpu_initialized)) { + printk(KERN_WARNING "CPU#%d already initialized!\n", cpu_id); + for (;;) + local_irq_enable(); + } + printk(KERN_INFO "Initializing CPU#%d\n", cpu_id); + + atomic_inc(&init_mm.mm_count); + current->active_mm = &init_mm; + BUG_ON(current->mm); + + enter_lazy_tlb(&init_mm, current); + + /* Force FPU initialization */ + clear_using_fpu(current); + + GxICR(CALL_FUNC_SINGLE_IPI) = CALL_FUNCTION_GxICR_LV | GxICR_DETECT; + mn10300_ipi_enable(CALL_FUNC_SINGLE_IPI); + + GxICR(LOCAL_TIMER_IPI) = LOCAL_TIMER_GxICR_LV | GxICR_DETECT; + mn10300_ipi_enable(LOCAL_TIMER_IPI); + + GxICR(RESCHEDULE_IPI) = RESCHEDULE_GxICR_LV | GxICR_DETECT; + mn10300_ipi_enable(RESCHEDULE_IPI); + +#ifdef CONFIG_MN10300_CACHE_ENABLED + GxICR(FLUSH_CACHE_IPI) = FLUSH_CACHE_GxICR_LV | GxICR_DETECT; + mn10300_ipi_enable(FLUSH_CACHE_IPI); +#endif + + mn10300_ipi_shutdown(SMP_BOOT_IRQ); + + /* Set up the non-maskable call function IPI */ + flags = arch_local_cli_save(); + GxICR(CALL_FUNCTION_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT; + tmp16 = GxICR(CALL_FUNCTION_NMI_IPI); + arch_local_irq_restore(flags); +} + +/** + * smp_prepare_cpu_init - Initialise CPU in startup_secondary + * + * Set interrupt level 0-6 setting and init ICR of gdbstub. + */ +void smp_prepare_cpu_init(void) +{ + int loop; + + /* Set the interrupt vector registers */ + IVAR0 = EXCEP_IRQ_LEVEL0; + IVAR1 = EXCEP_IRQ_LEVEL1; + IVAR2 = EXCEP_IRQ_LEVEL2; + IVAR3 = EXCEP_IRQ_LEVEL3; + IVAR4 = EXCEP_IRQ_LEVEL4; + IVAR5 = EXCEP_IRQ_LEVEL5; + IVAR6 = EXCEP_IRQ_LEVEL6; + + /* Disable all interrupts and set to priority 6 (lowest) */ + for (loop = 0; loop < GxICR_NUM_IRQS; loop++) + GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT; + +#ifdef CONFIG_GDBSTUB + /* initialise GDB-stub */ + do { + unsigned long flags; + u16 tmp16; + + flags = arch_local_cli_save(); + GxICR(GDB_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT; + tmp16 = GxICR(GDB_NMI_IPI); + arch_local_irq_restore(flags); + } while (0); +#endif +} + +/** + * start_secondary - Activate a secondary CPU (AP) + * @unused: Thread parameter (ignored). + */ +int __init start_secondary(void *unused) +{ + smp_cpu_init(); + smp_callin(); + while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) + cpu_relax(); + + local_flush_tlb(); + preempt_disable(); + smp_online(); + +#ifdef CONFIG_GENERIC_CLOCKEVENTS + init_clockevents(); +#endif + cpu_idle(); + return 0; +} + +/** + * smp_prepare_cpus - Boot up secondary CPUs (APs) + * @max_cpus: Maximum number of CPUs to boot. + * + * Call do_boot_cpu, and boot up APs. + */ +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + int phy_id; + + /* Setup boot CPU information */ + smp_store_cpu_info(0); + smp_tune_scheduling(); + + init_ipi(); + + /* If SMP should be disabled, then finish */ + if (max_cpus == 0) { + printk(KERN_INFO "SMP mode deactivated.\n"); + goto smp_done; + } + + /* Boot secondary CPUs (for which phy_id > 0) */ + for (phy_id = 0; phy_id < NR_CPUS; phy_id++) { + /* Don't boot primary CPU */ + if (max_cpus <= cpucount + 1) + continue; + if (phy_id != 0) + do_boot_cpu(phy_id); + set_cpu_possible(phy_id, true); + smp_show_cpu_info(phy_id); + } + +smp_done: + Dprintk("Boot done.\n"); +} + +/** + * smp_store_cpu_info - Save a CPU's information + * @cpu: The CPU to save for. + * + * Save boot_cpu_data and jiffy for the specified CPU. + */ +static void __init smp_store_cpu_info(int cpu) +{ + struct mn10300_cpuinfo *ci = &cpu_data[cpu]; + + *ci = boot_cpu_data; + ci->loops_per_jiffy = loops_per_jiffy; + ci->type = CPUREV; +} + +/** + * smp_tune_scheduling - Set time slice value + * + * Nothing to do here. + */ +static void __init smp_tune_scheduling(void) +{ +} + +/** + * do_boot_cpu: Boot up one CPU + * @phy_id: Physical ID of CPU to boot. + * + * Send an IPI to a secondary CPU to boot it. Returns 0 on success, 1 + * otherwise. + */ +static int __init do_boot_cpu(int phy_id) +{ + struct task_struct *idle; + unsigned long send_status, callin_status; + int timeout, cpu_id; + + send_status = GxICR_REQUEST; + callin_status = 0; + timeout = 0; + cpu_id = phy_id; + + cpucount++; + + /* Create idle thread for this CPU */ + idle = fork_idle(cpu_id); + if (IS_ERR(idle)) + panic("Failed fork for CPU#%d.", cpu_id); + + idle->thread.pc = (unsigned long)start_secondary; + + printk(KERN_NOTICE "Booting CPU#%d\n", cpu_id); + start_stack[cpu_id - 1] = idle->thread.sp; + + task_thread_info(idle)->cpu = cpu_id; + + /* Send boot IPI to AP */ + send_IPI_mask(cpumask_of(phy_id), SMP_BOOT_IRQ); + + Dprintk("Waiting for send to finish...\n"); + + /* Wait for AP's IPI receive in 100[ms] */ + do { + udelay(1000); + send_status = + CROSS_GxICR(SMP_BOOT_IRQ, phy_id) & GxICR_REQUEST; + } while (send_status == GxICR_REQUEST && timeout++ < 100); + + Dprintk("Waiting for cpu_callin_map.\n"); + + if (send_status == 0) { + /* Allow AP to start initializing */ + cpu_set(cpu_id, cpu_callout_map); + + /* Wait for setting cpu_callin_map */ + timeout = 0; + do { + udelay(1000); + callin_status = cpu_isset(cpu_id, cpu_callin_map); + } while (callin_status == 0 && timeout++ < 5000); + + if (callin_status == 0) + Dprintk("Not responding.\n"); + } else { + printk(KERN_WARNING "IPI not delivered.\n"); + } + + if (send_status == GxICR_REQUEST || callin_status == 0) { + cpu_clear(cpu_id, cpu_callout_map); + cpu_clear(cpu_id, cpu_callin_map); + cpu_clear(cpu_id, cpu_initialized); + cpucount--; + return 1; + } + return 0; +} + +/** + * smp_show_cpu_info - Show SMP CPU information + * @cpu: The CPU of interest. + */ +static void __init smp_show_cpu_info(int cpu) +{ + struct mn10300_cpuinfo *ci = &cpu_data[cpu]; + + printk(KERN_INFO + "CPU#%d : ioclk speed: %lu.%02luMHz : bogomips : %lu.%02lu\n", + cpu, + MN10300_IOCLK / 1000000, + (MN10300_IOCLK / 10000) % 100, + ci->loops_per_jiffy / (500000 / HZ), + (ci->loops_per_jiffy / (5000 / HZ)) % 100); +} + +/** + * smp_callin - Set cpu_callin_map of the current CPU ID + */ +static void __init smp_callin(void) +{ + unsigned long timeout; + int cpu; + + cpu = smp_processor_id(); + timeout = jiffies + (2 * HZ); + + if (cpu_isset(cpu, cpu_callin_map)) { + printk(KERN_ERR "CPU#%d already present.\n", cpu); + BUG(); + } + Dprintk("CPU#%d waiting for CALLOUT\n", cpu); + + /* Wait for AP startup 2s total */ + while (time_before(jiffies, timeout)) { + if (cpu_isset(cpu, cpu_callout_map)) + break; + cpu_relax(); + } + + if (!time_before(jiffies, timeout)) { + printk(KERN_ERR + "BUG: CPU#%d started up but did not get a callout!\n", + cpu); + BUG(); + } + +#ifdef CONFIG_CALIBRATE_DELAY + calibrate_delay(); /* Get our bogomips */ +#endif + + /* Save our processor parameters */ + smp_store_cpu_info(cpu); + + /* Allow the boot processor to continue */ + cpu_set(cpu, cpu_callin_map); +} + +/** + * smp_online - Set cpu_online_map + */ +static void __init smp_online(void) +{ + int cpu; + + cpu = smp_processor_id(); + + local_irq_enable(); + + cpu_set(cpu, cpu_online_map); + smp_wmb(); +} + +/** + * smp_cpus_done - + * @max_cpus: Maximum CPU count. + * + * Do nothing. + */ +void __init smp_cpus_done(unsigned int max_cpus) +{ +} + +/* + * smp_prepare_boot_cpu - Set up stuff for the boot processor. + * + * Set up the cpu_online_map, cpu_callout_map and cpu_callin_map of the boot + * processor (CPU 0). + */ +void __devinit smp_prepare_boot_cpu(void) +{ + cpu_set(0, cpu_callout_map); + cpu_set(0, cpu_callin_map); + current_thread_info()->cpu = 0; +} + +/* + * initialize_secondary - Initialise a secondary CPU (Application Processor). + * + * Set SP register and jump to thread's PC address. + */ +void initialize_secondary(void) +{ + asm volatile ( + "mov %0,sp \n" + "jmp (%1) \n" + : + : "a"(current->thread.sp), "a"(current->thread.pc)); +} + +/** + * __cpu_up - Set smp_commenced_mask for the nominated CPU + * @cpu: The target CPU. + */ +int __devinit __cpu_up(unsigned int cpu) +{ + int timeout; + +#ifdef CONFIG_HOTPLUG_CPU + if (num_online_cpus() == 1) + disable_hlt(); + if (sleep_mode[cpu]) + run_wakeup_cpu(cpu); +#endif /* CONFIG_HOTPLUG_CPU */ + + cpu_set(cpu, smp_commenced_mask); + + /* Wait 5s total for a response */ + for (timeout = 0 ; timeout < 5000 ; timeout++) { + if (cpu_isset(cpu, cpu_online_map)) + break; + udelay(1000); + } + + BUG_ON(!cpu_isset(cpu, cpu_online_map)); + return 0; +} + +/** + * setup_profiling_timer - Set up the profiling timer + * @multiplier - The frequency multiplier to use + * + * The frequency of the profiling timer can be changed by writing a multiplier + * value into /proc/profile. + */ +int setup_profiling_timer(unsigned int multiplier) +{ + return -EINVAL; +} + +/* + * CPU hotplug routines + */ +#ifdef CONFIG_HOTPLUG_CPU + +static DEFINE_PER_CPU(struct cpu, cpu_devices); + +static int __init topology_init(void) +{ + int cpu, ret; + + for_each_cpu(cpu) { + ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu, NULL); + if (ret) + printk(KERN_WARNING + "topology_init: register_cpu %d failed (%d)\n", + cpu, ret); + } + return 0; +} + +subsys_initcall(topology_init); + +int __cpu_disable(void) +{ + int cpu = smp_processor_id(); + if (cpu == 0) + return -EBUSY; + + migrate_irqs(); + cpu_clear(cpu, current->active_mm->cpu_vm_mask); + return 0; +} + +void __cpu_die(unsigned int cpu) +{ + run_sleep_cpu(cpu); + + if (num_online_cpus() == 1) + enable_hlt(); +} + +#ifdef CONFIG_MN10300_CACHE_ENABLED +static inline void hotplug_cpu_disable_cache(void) +{ + int tmp; + asm volatile( + " movhu (%1),%0 \n" + " and %2,%0 \n" + " movhu %0,(%1) \n" + "1: movhu (%1),%0 \n" + " btst %3,%0 \n" + " bne 1b \n" + : "=&r"(tmp) + : "a"(&CHCTR), + "i"(~(CHCTR_ICEN | CHCTR_DCEN)), + "i"(CHCTR_ICBUSY | CHCTR_DCBUSY) + : "memory", "cc"); +} + +static inline void hotplug_cpu_enable_cache(void) +{ + int tmp; + asm volatile( + "movhu (%1),%0 \n" + "or %2,%0 \n" + "movhu %0,(%1) \n" + : "=&r"(tmp) + : "a"(&CHCTR), + "i"(CHCTR_ICEN | CHCTR_DCEN) + : "memory", "cc"); +} + +static inline void hotplug_cpu_invalidate_cache(void) +{ + int tmp; + asm volatile ( + "movhu (%1),%0 \n" + "or %2,%0 \n" + "movhu %0,(%1) \n" + : "=&r"(tmp) + : "a"(&CHCTR), + "i"(CHCTR_ICINV | CHCTR_DCINV) + : "cc"); +} + +#else /* CONFIG_MN10300_CACHE_ENABLED */ +#define hotplug_cpu_disable_cache() do {} while (0) +#define hotplug_cpu_enable_cache() do {} while (0) +#define hotplug_cpu_invalidate_cache() do {} while (0) +#endif /* CONFIG_MN10300_CACHE_ENABLED */ + +/** + * hotplug_cpu_nmi_call_function - Call a function on other CPUs for hotplug + * @cpumask: List of target CPUs. + * @func: The function to call on those CPUs. + * @info: The context data for the function to be called. + * @wait: Whether to wait for the calls to complete. + * + * Non-maskably call a function on another CPU for hotplug purposes. + * + * This function must be called with maskable interrupts disabled. + */ +static int hotplug_cpu_nmi_call_function(cpumask_t cpumask, + smp_call_func_t func, void *info, + int wait) +{ + /* + * The address and the size of nmi_call_func_mask_data + * need to be aligned on L1_CACHE_BYTES. + */ + static struct nmi_call_data_struct nmi_call_func_mask_data + __cacheline_aligned; + unsigned long start, end; + + start = (unsigned long)&nmi_call_func_mask_data; + end = start + sizeof(struct nmi_call_data_struct); + + nmi_call_func_mask_data.func = func; + nmi_call_func_mask_data.info = info; + nmi_call_func_mask_data.started = cpumask; + nmi_call_func_mask_data.wait = wait; + if (wait) + nmi_call_func_mask_data.finished = cpumask; + + spin_lock(&smp_nmi_call_lock); + nmi_call_data = &nmi_call_func_mask_data; + mn10300_local_dcache_flush_range(start, end); + smp_wmb(); + + send_IPI_mask(cpumask, CALL_FUNCTION_NMI_IPI); + + do { + mn10300_local_dcache_inv_range(start, end); + barrier(); + } while (!cpus_empty(nmi_call_func_mask_data.started)); + + if (wait) { + do { + mn10300_local_dcache_inv_range(start, end); + barrier(); + } while (!cpus_empty(nmi_call_func_mask_data.finished)); + } + + spin_unlock(&smp_nmi_call_lock); + return 0; +} + +static void restart_wakeup_cpu(void) +{ + unsigned int cpu = smp_processor_id(); + + cpu_set(cpu, cpu_callin_map); + local_flush_tlb(); + cpu_set(cpu, cpu_online_map); + smp_wmb(); +} + +static void prepare_sleep_cpu(void *unused) +{ + sleep_mode[smp_processor_id()] = 1; + smp_mb(); + mn10300_local_dcache_flush_inv(); + hotplug_cpu_disable_cache(); + hotplug_cpu_invalidate_cache(); +} + +/* when this function called, IE=0, NMID=0. */ +static void sleep_cpu(void *unused) +{ + unsigned int cpu_id = smp_processor_id(); + /* + * CALL_FUNCTION_NMI_IPI for wakeup_cpu() shall not be requested, + * before this cpu goes in SLEEP mode. + */ + do { + smp_mb(); + __sleep_cpu(); + } while (sleep_mode[cpu_id]); + restart_wakeup_cpu(); +} + +static void run_sleep_cpu(unsigned int cpu) +{ + unsigned long flags; + cpumask_t cpumask = cpumask_of(cpu); + + flags = arch_local_cli_save(); + hotplug_cpu_nmi_call_function(cpumask, prepare_sleep_cpu, NULL, 1); + hotplug_cpu_nmi_call_function(cpumask, sleep_cpu, NULL, 0); + udelay(1); /* delay for the cpu to sleep. */ + arch_local_irq_restore(flags); +} + +static void wakeup_cpu(void) +{ + hotplug_cpu_invalidate_cache(); + hotplug_cpu_enable_cache(); + smp_mb(); + sleep_mode[smp_processor_id()] = 0; +} + +static void run_wakeup_cpu(unsigned int cpu) +{ + unsigned long flags; + + flags = arch_local_cli_save(); +#if NR_CPUS == 2 + mn10300_local_dcache_flush_inv(); +#else + /* + * Before waking up the cpu, + * all online cpus should stop and flush D-Cache for global data. + */ +#error not support NR_CPUS > 2, when CONFIG_HOTPLUG_CPU=y. +#endif + hotplug_cpu_nmi_call_function(cpumask_of(cpu), wakeup_cpu, NULL, 1); + arch_local_irq_restore(flags); +} + +#endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/mn10300/kernel/switch_to.S b/arch/mn10300/kernel/switch_to.S index 630aad71b946..9074d0fb8788 100644 --- a/arch/mn10300/kernel/switch_to.S +++ b/arch/mn10300/kernel/switch_to.S @@ -15,6 +15,9 @@ #include #include #include +#ifdef CONFIG_SMP +#include +#endif /* CONFIG_SMP */ .text @@ -35,8 +38,6 @@ ENTRY(__switch_to) mov d1,a1 # save prev context - mov (__frame),d0 - mov d0,(THREAD_FRAME,a0) mov __switch_back,d0 mov d0,(THREAD_PC,a0) mov sp,a2 @@ -58,8 +59,6 @@ ENTRY(__switch_to) mov a2,e2 #endif - mov (THREAD_FRAME,a1),a2 - mov a2,(__frame) mov (THREAD_PC,a1),a2 mov d2,d0 # for ret_from_fork mov d0,a0 # for __switch_to diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c index 8f7f6d22783d..f860a340acc9 100644 --- a/arch/mn10300/kernel/time.c +++ b/arch/mn10300/kernel/time.c @@ -17,29 +17,18 @@ #include #include #include +#include +#include #include #include #include #include #include - -#ifdef CONFIG_MN10300_RTC -unsigned long mn10300_ioclk; /* system I/O clock frequency */ -unsigned long mn10300_iobclk; /* system I/O clock frequency */ -unsigned long mn10300_tsc_per_HZ; /* number of ioclks per jiffy */ -#endif /* CONFIG_MN10300_RTC */ +#include "internal.h" static unsigned long mn10300_last_tsc; /* time-stamp counter at last time * interrupt occurred */ -static irqreturn_t timer_interrupt(int irq, void *dev_id); - -static struct irqaction timer_irq = { - .handler = timer_interrupt, - .flags = IRQF_DISABLED | IRQF_SHARED | IRQF_TIMER, - .name = "timer", -}; - static unsigned long sched_clock_multiplier; /* @@ -54,9 +43,12 @@ unsigned long long sched_clock(void) unsigned long tsc, tmp; unsigned product[3]; /* 96-bit intermediate value */ + /* cnt32_to_63() is not safe with preemption */ + preempt_disable(); + /* read the TSC value */ - tsc = 0 - get_cycles(); /* get_cycles() counts down */ + tsc = get_cycles(); /* expand to 64-bits. * - sched_clock() must be called once a minute or better or the @@ -64,6 +56,8 @@ unsigned long long sched_clock(void) */ tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL; + preempt_enable(); + /* scale the 64-bit TSC value to a nanosecond value via a 96-bit * intermediate */ @@ -90,6 +84,20 @@ static void __init mn10300_sched_clock_init(void) __muldiv64u(NSEC_PER_SEC, 1 << 16, MN10300_TSCCLK); } +/** + * local_timer_interrupt - Local timer interrupt handler + * + * Handle local timer interrupts for this CPU. They may have been propagated + * to this CPU from the CPU that actually gets them by way of an IPI. + */ +irqreturn_t local_timer_interrupt(void) +{ + profile_tick(CPU_PROFILING); + update_process_times(user_mode(get_irq_regs())); + return IRQ_HANDLED; +} + +#ifndef CONFIG_GENERIC_TIME /* * advance the kernel's time keeping clocks (xtime and jiffies) * - we use Timer 0 & 1 cascaded as a clock to nudge us the next time @@ -98,27 +106,73 @@ static void __init mn10300_sched_clock_init(void) static irqreturn_t timer_interrupt(int irq, void *dev_id) { unsigned tsc, elapse; + irqreturn_t ret; write_seqlock(&xtime_lock); while (tsc = get_cycles(), - elapse = mn10300_last_tsc - tsc, /* time elapsed since last + elapse = tsc - mn10300_last_tsc, /* time elapsed since last * tick */ elapse > MN10300_TSC_PER_HZ ) { - mn10300_last_tsc -= MN10300_TSC_PER_HZ; + mn10300_last_tsc += MN10300_TSC_PER_HZ; /* advance the kernel's time tracking system */ - profile_tick(CPU_PROFILING); do_timer(1); } write_sequnlock(&xtime_lock); - update_process_times(user_mode(get_irq_regs())); + ret = local_timer_interrupt(); +#ifdef CONFIG_SMP + send_IPI_allbutself(LOCAL_TIMER_IPI); +#endif + return ret; +} - return IRQ_HANDLED; +static struct irqaction timer_irq = { + .handler = timer_interrupt, + .flags = IRQF_DISABLED | IRQF_SHARED | IRQF_TIMER, + .name = "timer", +}; +#endif /* CONFIG_GENERIC_TIME */ + +#ifdef CONFIG_CSRC_MN10300 +void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock) +{ + u64 temp; + u32 shift; + + /* Find a shift value */ + for (shift = 32; shift > 0; shift--) { + temp = (u64) NSEC_PER_SEC << shift; + do_div(temp, clock); + if ((temp >> 32) == 0) + break; + } + cs->shift = shift; + cs->mult = (u32) temp; } +#endif + +#if CONFIG_CEVT_MN10300 +void __cpuinit clockevent_set_clock(struct clock_event_device *cd, + unsigned int clock) +{ + u64 temp; + u32 shift; + + /* Find a shift value */ + for (shift = 32; shift > 0; shift--) { + temp = (u64) clock << shift; + do_div(temp, NSEC_PER_SEC); + if ((temp >> 32) == 0) + break; + } + cd->shift = shift; + cd->mult = (u32) temp; +} +#endif /* * initialise the various timers used by the main part of the kernel @@ -131,21 +185,25 @@ void __init time_init(void) */ TMPSCNT |= TMPSCNT_ENABLE; +#ifdef CONFIG_GENERIC_TIME + init_clocksource(); +#else startup_timestamp_counter(); +#endif printk(KERN_INFO "timestamp counter I/O clock running at %lu.%02lu" " (calibrated against RTC)\n", MN10300_TSCCLK / 1000000, (MN10300_TSCCLK / 10000) % 100); - mn10300_last_tsc = TMTSCBC; - - /* use timer 0 & 1 cascaded to tick at as close to HZ as possible */ - setup_irq(TMJCIRQ, &timer_irq); + mn10300_last_tsc = read_timestamp_counter(); - set_intr_level(TMJCIRQ, TMJCICR_LEVEL); - - startup_jiffies_counter(); +#ifdef CONFIG_GENERIC_CLOCKEVENTS + init_clockevents(); +#else + reload_jiffies_counter(MN10300_JC_PER_HZ - 1); + setup_jiffies_interrupt(TMJCIRQ, &timer_irq, CONFIG_TIMER_IRQ_LEVEL); +#endif #ifdef CONFIG_MN10300_WD_TIMER /* start the watchdog timer */ diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c index 91365adba4f5..b90c3f160c77 100644 --- a/arch/mn10300/kernel/traps.c +++ b/arch/mn10300/kernel/traps.c @@ -45,9 +45,6 @@ #error "INTERRUPT_VECTOR_BASE not aligned to 16MiB boundary!" #endif -struct pt_regs *__frame; /* current frame pointer */ -EXPORT_SYMBOL(__frame); - int kstack_depth_to_print = 24; spinlock_t die_lock = __SPIN_LOCK_UNLOCKED(die_lock); @@ -101,7 +98,6 @@ DO_EINFO(SIGILL, {}, "invalid opcode", invalid_op, ILL_ILLOPC); DO_EINFO(SIGILL, {}, "invalid ex opcode", invalid_exop, ILL_ILLOPC); DO_EINFO(SIGBUS, {}, "invalid address", mem_error, BUS_ADRERR); DO_EINFO(SIGBUS, {}, "bus error", bus_error, BUS_ADRERR); -DO_EINFO(SIGILL, {}, "FPU invalid opcode", fpu_invalid_op, ILL_COPROC); DO_ERROR(SIGTRAP, #ifndef CONFIG_MN10300_USING_JTAG @@ -222,11 +218,14 @@ void show_registers_only(struct pt_regs *regs) printk(KERN_EMERG "threadinfo=%p task=%p)\n", current_thread_info(), current); - if ((unsigned long) current >= 0x90000000UL && - (unsigned long) current < 0x94000000UL) + if ((unsigned long) current >= PAGE_OFFSET && + (unsigned long) current < (unsigned long)high_memory) printk(KERN_EMERG "Process %s (pid: %d)\n", current->comm, current->pid); +#ifdef CONFIG_SMP + printk(KERN_EMERG "CPUID: %08x\n", CPUID); +#endif printk(KERN_EMERG "CPUP: %04hx\n", CPUP); printk(KERN_EMERG "TBR: %08x\n", TBR); printk(KERN_EMERG "DEAR: %08x\n", DEAR); @@ -522,8 +521,12 @@ void __init set_intr_stub(enum exception_code code, void *handler) { unsigned long addr; u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code); + unsigned long flags; addr = (unsigned long) handler - (unsigned long) vector; + + flags = arch_local_cli_save(); + vector[0] = 0xdc; /* JMP handler */ vector[1] = addr; vector[2] = addr >> 8; @@ -533,30 +536,12 @@ void __init set_intr_stub(enum exception_code code, void *handler) vector[6] = 0xcb; vector[7] = 0xcb; - mn10300_dcache_flush_inv(); - mn10300_icache_inv(); -} - -/* - * set an interrupt stub to invoke the JTAG unit and then jump to a handler - */ -void __init set_jtag_stub(enum exception_code code, void *handler) -{ - unsigned long addr; - u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code); - - addr = (unsigned long) handler - ((unsigned long) vector + 1); - vector[0] = 0xff; /* PI to jump into JTAG debugger */ - vector[1] = 0xdc; /* jmp handler */ - vector[2] = addr; - vector[3] = addr >> 8; - vector[4] = addr >> 16; - vector[5] = addr >> 24; - vector[6] = 0xcb; - vector[7] = 0xcb; + arch_local_irq_restore(flags); +#ifndef CONFIG_MN10300_CACHE_SNOOP mn10300_dcache_flush_inv(); - flush_icache_range((unsigned long) vector, (unsigned long) vector + 8); + mn10300_icache_inv(); +#endif } /* @@ -581,7 +566,6 @@ void __init trap_init(void) set_excp_vector(EXCEP_PRIVINSACC, insn_acc_error); set_excp_vector(EXCEP_PRIVDATACC, data_acc_error); set_excp_vector(EXCEP_DATINSACC, insn_acc_error); - set_excp_vector(EXCEP_FPU_DISABLED, fpu_disabled); set_excp_vector(EXCEP_FPU_UNIMPINS, fpu_invalid_op); set_excp_vector(EXCEP_FPU_OPERATION, fpu_exception); diff --git a/arch/mn10300/lib/bitops.c b/arch/mn10300/lib/bitops.c index 440a7dcbf87b..a66c6cdaf442 100644 --- a/arch/mn10300/lib/bitops.c +++ b/arch/mn10300/lib/bitops.c @@ -15,7 +15,7 @@ /* * try flipping a bit using BSET and BCLR */ -void change_bit(int nr, volatile void *addr) +void change_bit(unsigned long nr, volatile void *addr) { if (test_bit(nr, addr)) goto try_clear_bit; @@ -34,7 +34,7 @@ try_clear_bit: /* * try flipping a bit using BSET and BCLR and returning the old value */ -int test_and_change_bit(int nr, volatile void *addr) +int test_and_change_bit(unsigned long nr, volatile void *addr) { if (test_bit(nr, addr)) goto try_clear_bit; diff --git a/arch/mn10300/lib/delay.c b/arch/mn10300/lib/delay.c index fdf6f710f94e..8e7ceb8ba33d 100644 --- a/arch/mn10300/lib/delay.c +++ b/arch/mn10300/lib/delay.c @@ -38,14 +38,14 @@ EXPORT_SYMBOL(__delay); */ void __udelay(unsigned long usecs) { - signed long ioclk, stop; + unsigned long start, stop, cnt; /* usecs * CLK / 1E6 */ stop = __muldiv64u(usecs, MN10300_TSCCLK, 1000000); - stop = TMTSCBC - stop; + start = TMTSCBC; do { - ioclk = TMTSCBC; - } while (stop < ioclk); + cnt = start - TMTSCBC; + } while (cnt < stop); } EXPORT_SYMBOL(__udelay); diff --git a/arch/mn10300/lib/do_csum.S b/arch/mn10300/lib/do_csum.S index e138994e1667..1d27bba0cd8f 100644 --- a/arch/mn10300/lib/do_csum.S +++ b/arch/mn10300/lib/do_csum.S @@ -10,26 +10,25 @@ */ #include - .section .text - .balign L1_CACHE_BYTES + .section .text + .balign L1_CACHE_BYTES ############################################################################### # -# unsigned int do_csum(const unsigned char *buff, size_t len) +# unsigned int do_csum(const unsigned char *buff, int len) # ############################################################################### .globl do_csum - .type do_csum,@function + .type do_csum,@function do_csum: movm [d2,d3],(sp) - mov d0,(12,sp) - mov d1,(16,sp) mov d1,d2 # count mov d0,a0 # buff + mov a0,a1 clr d1 # accumulator cmp +0,d2 - beq do_csum_done # return if zero-length buffer + ble do_csum_done # check for zero length or negative # 4-byte align the buffer pointer btst +3,a0 @@ -41,17 +40,15 @@ do_csum: inc a0 asl +8,d0 add d0,d1 - addc +0,d1 add -1,d2 -do_csum_addr_not_odd: +do_csum_addr_not_odd: cmp +2,d2 bcs do_csum_fewer_than_4 btst +2,a0 beq do_csum_now_4b_aligned movhu (a0+),d0 add d0,d1 - addc +0,d1 add -2,d2 cmp +4,d2 bcs do_csum_fewer_than_4 @@ -66,20 +63,20 @@ do_csum_now_4b_aligned: do_csum_loop: mov (a0+),d0 - add d0,d1 mov (a0+),e0 - addc e0,d1 mov (a0+),e1 - addc e1,d1 mov (a0+),e3 + add d0,d1 + addc e0,d1 + addc e1,d1 addc e3,d1 mov (a0+),d0 - addc d0,d1 mov (a0+),e0 - addc e0,d1 mov (a0+),e1 - addc e1,d1 mov (a0+),e3 + addc d0,d1 + addc e0,d1 + addc e1,d1 addc e3,d1 addc +0,d1 @@ -94,12 +91,12 @@ do_csum_remainder: cmp +16,d2 bcs do_csum_fewer_than_16 mov (a0+),d0 - add d0,d1 mov (a0+),e0 - addc e0,d1 mov (a0+),e1 - addc e1,d1 mov (a0+),e3 + add d0,d1 + addc e0,d1 + addc e1,d1 addc e3,d1 addc +0,d1 add -16,d2 @@ -131,9 +128,9 @@ do_csum_fewer_than_4: xor_cmp d0,d0,+2,d2 bcs do_csum_fewer_than_2 movhu (a0+),d0 -do_csum_fewer_than_2: and +1,d2 beq do_csum_add_last_bit +do_csum_fewer_than_2: movbu (a0),d3 add d3,d0 do_csum_add_last_bit: @@ -142,21 +139,19 @@ do_csum_add_last_bit: do_csum_done: # compress the checksum down to 16 bits - mov +0xffff0000,d2 - and d1,d2 + mov +0xffff0000,d0 + and d1,d0 asl +16,d1 - add d2,d1,d0 + add d1,d0 addc +0xffff,d0 lsr +16,d0 # flip the halves of the word result if the buffer was oddly aligned - mov (12,sp),d1 - and +1,d1 + and +1,a1 beq do_csum_not_oddly_aligned swaph d0,d0 # exchange bits 15:8 with 7:0 do_csum_not_oddly_aligned: ret [d2,d3],8 -do_csum_end: - .size do_csum, do_csum_end-do_csum + .size do_csum, .-do_csum diff --git a/arch/mn10300/mm/Kconfig.cache b/arch/mn10300/mm/Kconfig.cache new file mode 100644 index 000000000000..c4fd923a55a0 --- /dev/null +++ b/arch/mn10300/mm/Kconfig.cache @@ -0,0 +1,101 @@ +# +# MN10300 CPU cache options +# + +choice + prompt "CPU Caching mode" + default MN10300_CACHE_WBACK + help + This option determines the caching mode for the kernel. + + Write-Back caching mode involves the all reads and writes causing + the affected cacheline to be read into the cache first before being + operated upon. Memory is not then updated by a write until the cache + is filled and a cacheline needs to be displaced from the cache to + make room. Only at that point is it written back. + + Write-Through caching only fetches cachelines from memory on a + read. Writes always get written directly to memory. If the affected + cacheline is also in cache, it will be updated too. + + The final option is to turn of caching entirely. + +config MN10300_CACHE_WBACK + bool "Write-Back" + help + The dcache operates in delayed write-back mode. It must be manually + flushed if writes are made that subsequently need to be executed or + to be DMA'd by a device. + +config MN10300_CACHE_WTHRU + bool "Write-Through" + help + The dcache operates in immediate write-through mode. Writes are + committed to RAM immediately in addition to being stored in the + cache. This means that the written data is immediately available for + execution or DMA. + + This is not available for use with an SMP kernel if cache flushing + and invalidation by automatic purge register is not selected. + +config MN10300_CACHE_DISABLED + bool "Disabled" + help + The icache and dcache are disabled. + +endchoice + +config MN10300_CACHE_ENABLED + def_bool y if !MN10300_CACHE_DISABLED + + +choice + prompt "CPU cache flush/invalidate method" + default MN10300_CACHE_MANAGE_BY_TAG if !AM34_2 + default MN10300_CACHE_MANAGE_BY_REG if AM34_2 + depends on MN10300_CACHE_ENABLED + help + This determines the method by which CPU cache flushing and + invalidation is performed. + +config MN10300_CACHE_MANAGE_BY_TAG + bool "Use the cache tag registers directly" + depends on !(SMP && MN10300_CACHE_WTHRU) + +config MN10300_CACHE_MANAGE_BY_REG + bool "Flush areas by way of automatic purge registers (AM34 only)" + depends on AM34_2 + +endchoice + +config MN10300_CACHE_INV_BY_TAG + def_bool y if MN10300_CACHE_MANAGE_BY_TAG && MN10300_CACHE_ENABLED + +config MN10300_CACHE_INV_BY_REG + def_bool y if MN10300_CACHE_MANAGE_BY_REG && MN10300_CACHE_ENABLED + +config MN10300_CACHE_FLUSH_BY_TAG + def_bool y if MN10300_CACHE_MANAGE_BY_TAG && MN10300_CACHE_WBACK + +config MN10300_CACHE_FLUSH_BY_REG + def_bool y if MN10300_CACHE_MANAGE_BY_REG && MN10300_CACHE_WBACK + + +config MN10300_HAS_CACHE_SNOOP + def_bool n + +config MN10300_CACHE_SNOOP + bool "Use CPU Cache Snooping" + depends on MN10300_CACHE_ENABLED && MN10300_HAS_CACHE_SNOOP + default y + +config MN10300_CACHE_FLUSH_ICACHE + def_bool y if MN10300_CACHE_WBACK && !MN10300_CACHE_SNOOP + help + Set if we need the dcache flushing before the icache is invalidated. + +config MN10300_CACHE_INV_ICACHE + def_bool y if MN10300_CACHE_WTHRU && !MN10300_CACHE_SNOOP + help + Set if we need the icache to be invalidated, even if the dcache is in + write-through mode and doesn't need flushing. diff --git a/arch/mn10300/mm/Makefile b/arch/mn10300/mm/Makefile index 1557277fbc5c..203fee23f7d7 100644 --- a/arch/mn10300/mm/Makefile +++ b/arch/mn10300/mm/Makefile @@ -2,11 +2,21 @@ # Makefile for the MN10300-specific memory management code # -cacheflush-y := cache.o cache-mn10300.o -cacheflush-$(CONFIG_MN10300_CACHE_WBACK) += cache-flush-mn10300.o +cache-smp-wback-$(CONFIG_MN10300_CACHE_WBACK) := cache-smp-flush.o + +cacheflush-y := cache.o +cacheflush-$(CONFIG_SMP) += cache-smp.o cache-smp-inv.o $(cache-smp-wback-y) +cacheflush-$(CONFIG_MN10300_CACHE_INV_ICACHE) += cache-inv-icache.o +cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_ICACHE) += cache-flush-icache.o +cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_TAG) += cache-inv-by-tag.o +cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_REG) += cache-inv-by-reg.o +cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_TAG) += cache-flush-by-tag.o +cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_REG) += cache-flush-by-reg.o cacheflush-$(CONFIG_MN10300_CACHE_DISABLED) := cache-disabled.o obj-y := \ init.o fault.o pgtable.o extable.o tlb-mn10300.o mmu-context.o \ misalignment.o dma-alloc.o $(cacheflush-y) + +obj-$(CONFIG_SMP) += tlb-smp.o diff --git a/arch/mn10300/mm/cache-flush-by-reg.S b/arch/mn10300/mm/cache-flush-by-reg.S new file mode 100644 index 000000000000..1dcae0211671 --- /dev/null +++ b/arch/mn10300/mm/cache-flush-by-reg.S @@ -0,0 +1,308 @@ +/* MN10300 CPU core caching routines, using indirect regs on cache controller + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include + + .am33_2 + +#ifndef CONFIG_SMP + .globl mn10300_dcache_flush + .globl mn10300_dcache_flush_page + .globl mn10300_dcache_flush_range + .globl mn10300_dcache_flush_range2 + .globl mn10300_dcache_flush_inv + .globl mn10300_dcache_flush_inv_page + .globl mn10300_dcache_flush_inv_range + .globl mn10300_dcache_flush_inv_range2 + +mn10300_dcache_flush = mn10300_local_dcache_flush +mn10300_dcache_flush_page = mn10300_local_dcache_flush_page +mn10300_dcache_flush_range = mn10300_local_dcache_flush_range +mn10300_dcache_flush_range2 = mn10300_local_dcache_flush_range2 +mn10300_dcache_flush_inv = mn10300_local_dcache_flush_inv +mn10300_dcache_flush_inv_page = mn10300_local_dcache_flush_inv_page +mn10300_dcache_flush_inv_range = mn10300_local_dcache_flush_inv_range +mn10300_dcache_flush_inv_range2 = mn10300_local_dcache_flush_inv_range2 + +#endif /* !CONFIG_SMP */ + +############################################################################### +# +# void mn10300_local_dcache_flush(void) +# Flush the entire data cache back to RAM +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_flush + .type mn10300_local_dcache_flush,@function +mn10300_local_dcache_flush: + movhu (CHCTR),d0 + btst CHCTR_DCEN,d0 + beq mn10300_local_dcache_flush_end + + mov DCPGCR,a0 + + LOCAL_CLI_SAVE(d1) + + # wait for busy bit of area purge + setlb + mov (a0),d0 + btst DCPGCR_DCPGBSY,d0 + lne + + # set mask + clr d0 + mov d0,(DCPGMR) + + # area purge + # + # DCPGCR = DCPGCR_DCP + # + mov DCPGCR_DCP,d0 + mov d0,(a0) + + # wait for busy bit of area purge + setlb + mov (a0),d0 + btst DCPGCR_DCPGBSY,d0 + lne + + LOCAL_IRQ_RESTORE(d1) + +mn10300_local_dcache_flush_end: + ret [],0 + .size mn10300_local_dcache_flush,.-mn10300_local_dcache_flush + +############################################################################### +# +# void mn10300_local_dcache_flush_page(unsigned long start) +# void mn10300_local_dcache_flush_range(unsigned long start, unsigned long end) +# void mn10300_local_dcache_flush_range2(unsigned long start, unsigned long size) +# Flush a range of addresses on a page in the dcache +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_flush_page + .globl mn10300_local_dcache_flush_range + .globl mn10300_local_dcache_flush_range2 + .type mn10300_local_dcache_flush_page,@function + .type mn10300_local_dcache_flush_range,@function + .type mn10300_local_dcache_flush_range2,@function +mn10300_local_dcache_flush_page: + and ~(PAGE_SIZE-1),d0 + mov PAGE_SIZE,d1 +mn10300_local_dcache_flush_range2: + add d0,d1 +mn10300_local_dcache_flush_range: + movm [d2,d3,a2],(sp) + + movhu (CHCTR),d2 + btst CHCTR_DCEN,d2 + beq mn10300_local_dcache_flush_range_end + + # calculate alignsize + # + # alignsize = L1_CACHE_BYTES; + # for (i = (end - start - 1) / L1_CACHE_BYTES ; i > 0; i >>= 1) + # alignsize <<= 1; + # d2 = alignsize; + # + mov L1_CACHE_BYTES,d2 + sub d0,d1,d3 + add -1,d3 + lsr L1_CACHE_SHIFT,d3 + beq 2f +1: + add d2,d2 + lsr 1,d3 + bne 1b +2: + mov d1,a1 # a1 = end + + LOCAL_CLI_SAVE(d3) + mov DCPGCR,a0 + + # wait for busy bit of area purge + setlb + mov (a0),d1 + btst DCPGCR_DCPGBSY,d1 + lne + + # determine the mask + mov d2,d1 + add -1,d1 + not d1 # d1 = mask = ~(alignsize-1) + mov d1,(DCPGMR) + + and d1,d0,a2 # a2 = mask & start + +dcpgloop: + # area purge + mov a2,d0 + or DCPGCR_DCP,d0 + mov d0,(a0) # DCPGCR = (mask & start) | DCPGCR_DCP + + # wait for busy bit of area purge + setlb + mov (a0),d1 + btst DCPGCR_DCPGBSY,d1 + lne + + # check purge of end address + add d2,a2 # a2 += alignsize + cmp a1,a2 # if (a2 < end) goto dcpgloop + bns dcpgloop + + LOCAL_IRQ_RESTORE(d3) + +mn10300_local_dcache_flush_range_end: + ret [d2,d3,a2],12 + + .size mn10300_local_dcache_flush_page,.-mn10300_local_dcache_flush_page + .size mn10300_local_dcache_flush_range,.-mn10300_local_dcache_flush_range + .size mn10300_local_dcache_flush_range2,.-mn10300_local_dcache_flush_range2 + +############################################################################### +# +# void mn10300_local_dcache_flush_inv(void) +# Flush the entire data cache and invalidate all entries +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_flush_inv + .type mn10300_local_dcache_flush_inv,@function +mn10300_local_dcache_flush_inv: + movhu (CHCTR),d0 + btst CHCTR_DCEN,d0 + beq mn10300_local_dcache_flush_inv_end + + mov DCPGCR,a0 + + LOCAL_CLI_SAVE(d1) + + # wait for busy bit of area purge & invalidate + setlb + mov (a0),d0 + btst DCPGCR_DCPGBSY,d0 + lne + + # set the mask to cover everything + clr d0 + mov d0,(DCPGMR) + + # area purge & invalidate + mov DCPGCR_DCP|DCPGCR_DCI,d0 + mov d0,(a0) + + # wait for busy bit of area purge & invalidate + setlb + mov (a0),d0 + btst DCPGCR_DCPGBSY,d0 + lne + + LOCAL_IRQ_RESTORE(d1) + +mn10300_local_dcache_flush_inv_end: + ret [],0 + .size mn10300_local_dcache_flush_inv,.-mn10300_local_dcache_flush_inv + +############################################################################### +# +# void mn10300_local_dcache_flush_inv_page(unsigned long start) +# void mn10300_local_dcache_flush_inv_range(unsigned long start, unsigned long end) +# void mn10300_local_dcache_flush_inv_range2(unsigned long start, unsigned long size) +# Flush and invalidate a range of addresses on a page in the dcache +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_flush_inv_page + .globl mn10300_local_dcache_flush_inv_range + .globl mn10300_local_dcache_flush_inv_range2 + .type mn10300_local_dcache_flush_inv_page,@function + .type mn10300_local_dcache_flush_inv_range,@function + .type mn10300_local_dcache_flush_inv_range2,@function +mn10300_local_dcache_flush_inv_page: + and ~(PAGE_SIZE-1),d0 + mov PAGE_SIZE,d1 +mn10300_local_dcache_flush_inv_range2: + add d0,d1 +mn10300_local_dcache_flush_inv_range: + movm [d2,d3,a2],(sp) + + movhu (CHCTR),d2 + btst CHCTR_DCEN,d2 + beq mn10300_local_dcache_flush_inv_range_end + + # calculate alignsize + # + # alignsize = L1_CACHE_BYTES; + # for (i = (end - start - 1) / L1_CACHE_BYTES; i > 0; i >>= 1) + # alignsize <<= 1; + # d2 = alignsize + # + mov L1_CACHE_BYTES,d2 + sub d0,d1,d3 + add -1,d3 + lsr L1_CACHE_SHIFT,d3 + beq 2f +1: + add d2,d2 + lsr 1,d3 + bne 1b +2: + mov d1,a1 # a1 = end + + LOCAL_CLI_SAVE(d3) + mov DCPGCR,a0 + + # wait for busy bit of area purge & invalidate + setlb + mov (a0),d1 + btst DCPGCR_DCPGBSY,d1 + lne + + # set the mask + mov d2,d1 + add -1,d1 + not d1 # d1 = mask = ~(alignsize-1) + mov d1,(DCPGMR) + + and d1,d0,a2 # a2 = mask & start + +dcpgivloop: + # area purge & invalidate + mov a2,d0 + or DCPGCR_DCP|DCPGCR_DCI,d0 + mov d0,(a0) # DCPGCR = (mask & start)|DCPGCR_DCP|DCPGCR_DCI + + # wait for busy bit of area purge & invalidate + setlb + mov (a0),d1 + btst DCPGCR_DCPGBSY,d1 + lne + + # check purge & invalidate of end address + add d2,a2 # a2 += alignsize + cmp a1,a2 # if (a2 < end) goto dcpgivloop + bns dcpgivloop + + LOCAL_IRQ_RESTORE(d3) + +mn10300_local_dcache_flush_inv_range_end: + ret [d2,d3,a2],12 + .size mn10300_local_dcache_flush_inv_page,.-mn10300_local_dcache_flush_inv_page + .size mn10300_local_dcache_flush_inv_range,.-mn10300_local_dcache_flush_inv_range + .size mn10300_local_dcache_flush_inv_range2,.-mn10300_local_dcache_flush_inv_range2 diff --git a/arch/mn10300/mm/cache-flush-by-tag.S b/arch/mn10300/mm/cache-flush-by-tag.S new file mode 100644 index 000000000000..5cd6a27dd63e --- /dev/null +++ b/arch/mn10300/mm/cache-flush-by-tag.S @@ -0,0 +1,251 @@ +/* MN10300 CPU core caching routines, using direct tag flushing + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include + + .am33_2 + +#ifndef CONFIG_SMP + .globl mn10300_dcache_flush + .globl mn10300_dcache_flush_page + .globl mn10300_dcache_flush_range + .globl mn10300_dcache_flush_range2 + .globl mn10300_dcache_flush_inv + .globl mn10300_dcache_flush_inv_page + .globl mn10300_dcache_flush_inv_range + .globl mn10300_dcache_flush_inv_range2 + +mn10300_dcache_flush = mn10300_local_dcache_flush +mn10300_dcache_flush_page = mn10300_local_dcache_flush_page +mn10300_dcache_flush_range = mn10300_local_dcache_flush_range +mn10300_dcache_flush_range2 = mn10300_local_dcache_flush_range2 +mn10300_dcache_flush_inv = mn10300_local_dcache_flush_inv +mn10300_dcache_flush_inv_page = mn10300_local_dcache_flush_inv_page +mn10300_dcache_flush_inv_range = mn10300_local_dcache_flush_inv_range +mn10300_dcache_flush_inv_range2 = mn10300_local_dcache_flush_inv_range2 + +#endif /* !CONFIG_SMP */ + +############################################################################### +# +# void mn10300_local_dcache_flush(void) +# Flush the entire data cache back to RAM +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_flush + .type mn10300_local_dcache_flush,@function +mn10300_local_dcache_flush: + movhu (CHCTR),d0 + btst CHCTR_DCEN,d0 + beq mn10300_local_dcache_flush_end + + # read the addresses tagged in the cache's tag RAM and attempt to flush + # those addresses specifically + # - we rely on the hardware to filter out invalid tag entry addresses + mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address + mov DCACHE_PURGE(0,0),a1 # dcache purge request address + mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries + +mn10300_local_dcache_flush_loop: + mov (a0),d0 + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 + or L1_CACHE_TAG_VALID,d0 # retain valid entries in the + # cache + mov d0,(a1) # conditional purge + + add L1_CACHE_BYTES,a0 + add L1_CACHE_BYTES,a1 + add -1,d1 + bne mn10300_local_dcache_flush_loop + +mn10300_local_dcache_flush_end: + ret [],0 + .size mn10300_local_dcache_flush,.-mn10300_local_dcache_flush + +############################################################################### +# +# void mn10300_local_dcache_flush_page(unsigned long start) +# void mn10300_local_dcache_flush_range(unsigned long start, unsigned long end) +# void mn10300_local_dcache_flush_range2(unsigned long start, unsigned long size) +# Flush a range of addresses on a page in the dcache +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_flush_page + .globl mn10300_local_dcache_flush_range + .globl mn10300_local_dcache_flush_range2 + .type mn10300_local_dcache_flush_page,@function + .type mn10300_local_dcache_flush_range,@function + .type mn10300_local_dcache_flush_range2,@function +mn10300_local_dcache_flush_page: + and ~(PAGE_SIZE-1),d0 + mov PAGE_SIZE,d1 +mn10300_local_dcache_flush_range2: + add d0,d1 +mn10300_local_dcache_flush_range: + movm [d2],(sp) + + movhu (CHCTR),d2 + btst CHCTR_DCEN,d2 + beq mn10300_local_dcache_flush_range_end + + sub d0,d1,a0 + cmp MN10300_DCACHE_FLUSH_BORDER,a0 + ble 1f + + movm (sp),[d2] + bra mn10300_local_dcache_flush +1: + + # round start addr down + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 + mov d0,a1 + + add L1_CACHE_BYTES,d1 # round end addr up + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 + + # write a request to flush all instances of an address from the cache + mov DCACHE_PURGE(0,0),a0 + mov a1,d0 + and L1_CACHE_TAG_ENTRY,d0 + add d0,a0 # starting dcache purge control + # reg address + + sub a1,d1 + lsr L1_CACHE_SHIFT,d1 # total number of entries to + # examine + + or L1_CACHE_TAG_VALID,a1 # retain valid entries in the + # cache + +mn10300_local_dcache_flush_range_loop: + mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line + # all ways + + add L1_CACHE_BYTES,a0 + add L1_CACHE_BYTES,a1 + and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0 + add -1,d1 + bne mn10300_local_dcache_flush_range_loop + +mn10300_local_dcache_flush_range_end: + ret [d2],4 + + .size mn10300_local_dcache_flush_page,.-mn10300_local_dcache_flush_page + .size mn10300_local_dcache_flush_range,.-mn10300_local_dcache_flush_range + .size mn10300_local_dcache_flush_range2,.-mn10300_local_dcache_flush_range2 + +############################################################################### +# +# void mn10300_local_dcache_flush_inv(void) +# Flush the entire data cache and invalidate all entries +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_flush_inv + .type mn10300_local_dcache_flush_inv,@function +mn10300_local_dcache_flush_inv: + movhu (CHCTR),d0 + btst CHCTR_DCEN,d0 + beq mn10300_local_dcache_flush_inv_end + + mov L1_CACHE_NENTRIES,d1 + clr a1 + +mn10300_local_dcache_flush_inv_loop: + mov (DCACHE_PURGE_WAY0(0),a1),d0 # unconditional purge + mov (DCACHE_PURGE_WAY1(0),a1),d0 # unconditional purge + mov (DCACHE_PURGE_WAY2(0),a1),d0 # unconditional purge + mov (DCACHE_PURGE_WAY3(0),a1),d0 # unconditional purge + + add L1_CACHE_BYTES,a1 + add -1,d1 + bne mn10300_local_dcache_flush_inv_loop + +mn10300_local_dcache_flush_inv_end: + ret [],0 + .size mn10300_local_dcache_flush_inv,.-mn10300_local_dcache_flush_inv + +############################################################################### +# +# void mn10300_local_dcache_flush_inv_page(unsigned long start) +# void mn10300_local_dcache_flush_inv_range(unsigned long start, unsigned long end) +# void mn10300_local_dcache_flush_inv_range2(unsigned long start, unsigned long size) +# Flush and invalidate a range of addresses on a page in the dcache +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_flush_inv_page + .globl mn10300_local_dcache_flush_inv_range + .globl mn10300_local_dcache_flush_inv_range2 + .type mn10300_local_dcache_flush_inv_page,@function + .type mn10300_local_dcache_flush_inv_range,@function + .type mn10300_local_dcache_flush_inv_range2,@function +mn10300_local_dcache_flush_inv_page: + and ~(PAGE_SIZE-1),d0 + mov PAGE_SIZE,d1 +mn10300_local_dcache_flush_inv_range2: + add d0,d1 +mn10300_local_dcache_flush_inv_range: + movm [d2],(sp) + + movhu (CHCTR),d2 + btst CHCTR_DCEN,d2 + beq mn10300_local_dcache_flush_inv_range_end + + sub d0,d1,a0 + cmp MN10300_DCACHE_FLUSH_INV_BORDER,a0 + ble 1f + + movm (sp),[d2] + bra mn10300_local_dcache_flush_inv +1: + + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start + # addr down + mov d0,a1 + + add L1_CACHE_BYTES,d1 # round end addr up + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 + + # write a request to flush and invalidate all instances of an address + # from the cache + mov DCACHE_PURGE(0,0),a0 + mov a1,d0 + and L1_CACHE_TAG_ENTRY,d0 + add d0,a0 # starting dcache purge control + # reg address + + sub a1,d1 + lsr L1_CACHE_SHIFT,d1 # total number of entries to + # examine + +mn10300_local_dcache_flush_inv_range_loop: + mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line + # in all ways + + add L1_CACHE_BYTES,a0 + add L1_CACHE_BYTES,a1 + and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0 + add -1,d1 + bne mn10300_local_dcache_flush_inv_range_loop + +mn10300_local_dcache_flush_inv_range_end: + ret [d2],4 + .size mn10300_local_dcache_flush_inv_page,.-mn10300_local_dcache_flush_inv_page + .size mn10300_local_dcache_flush_inv_range,.-mn10300_local_dcache_flush_inv_range + .size mn10300_local_dcache_flush_inv_range2,.-mn10300_local_dcache_flush_inv_range2 diff --git a/arch/mn10300/mm/cache-flush-icache.c b/arch/mn10300/mm/cache-flush-icache.c new file mode 100644 index 000000000000..fdb1a9db20f0 --- /dev/null +++ b/arch/mn10300/mm/cache-flush-icache.c @@ -0,0 +1,155 @@ +/* Flush dcache and invalidate icache when the dcache is in writeback mode + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include +#include +#include "cache-smp.h" + +/** + * flush_icache_page - Flush a page from the dcache and invalidate the icache + * @vma: The VMA the page is part of. + * @page: The page to be flushed. + * + * Write a page back from the dcache and invalidate the icache so that we can + * run code from it that we've just written into it + */ +void flush_icache_page(struct vm_area_struct *vma, struct page *page) +{ + unsigned long start = page_to_phys(page); + unsigned long flags; + + flags = smp_lock_cache(); + + mn10300_local_dcache_flush_page(start); + mn10300_local_icache_inv_page(start); + + smp_cache_call(SMP_IDCACHE_INV_FLUSH_RANGE, start, start + PAGE_SIZE); + smp_unlock_cache(flags); +} +EXPORT_SYMBOL(flush_icache_page); + +/** + * flush_icache_page_range - Flush dcache and invalidate icache for part of a + * single page + * @start: The starting virtual address of the page part. + * @end: The ending virtual address of the page part. + * + * Flush the dcache and invalidate the icache for part of a single page, as + * determined by the virtual addresses given. The page must be in the paged + * area. + */ +static void flush_icache_page_range(unsigned long start, unsigned long end) +{ + unsigned long addr, size, off; + struct page *page; + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *ppte, pte; + + /* work out how much of the page to flush */ + off = start & ~PAGE_MASK; + size = end - start; + + /* get the physical address the page is mapped to from the page + * tables */ + pgd = pgd_offset(current->mm, start); + if (!pgd || !pgd_val(*pgd)) + return; + + pud = pud_offset(pgd, start); + if (!pud || !pud_val(*pud)) + return; + + pmd = pmd_offset(pud, start); + if (!pmd || !pmd_val(*pmd)) + return; + + ppte = pte_offset_map(pmd, start); + if (!ppte) + return; + pte = *ppte; + pte_unmap(ppte); + + if (pte_none(pte)) + return; + + page = pte_page(pte); + if (!page) + return; + + addr = page_to_phys(page); + + /* flush the dcache and invalidate the icache coverage on that + * region */ + mn10300_local_dcache_flush_range2(addr + off, size); + mn10300_local_icache_inv_range2(addr + off, size); + smp_cache_call(SMP_IDCACHE_INV_FLUSH_RANGE, start, end); +} + +/** + * flush_icache_range - Globally flush dcache and invalidate icache for region + * @start: The starting virtual address of the region. + * @end: The ending virtual address of the region. + * + * This is used by the kernel to globally flush some code it has just written + * from the dcache back to RAM and then to globally invalidate the icache over + * that region so that that code can be run on all CPUs in the system. + */ +void flush_icache_range(unsigned long start, unsigned long end) +{ + unsigned long start_page, end_page; + unsigned long flags; + + flags = smp_lock_cache(); + + if (end > 0x80000000UL) { + /* addresses above 0xa0000000 do not go through the cache */ + if (end > 0xa0000000UL) { + end = 0xa0000000UL; + if (start >= end) + goto done; + } + + /* kernel addresses between 0x80000000 and 0x9fffffff do not + * require page tables, so we just map such addresses + * directly */ + start_page = (start >= 0x80000000UL) ? start : 0x80000000UL; + mn10300_local_dcache_flush_range(start_page, end); + mn10300_local_icache_inv_range(start_page, end); + smp_cache_call(SMP_IDCACHE_INV_FLUSH_RANGE, start_page, end); + if (start_page == start) + goto done; + end = start_page; + } + + start_page = start & PAGE_MASK; + end_page = (end - 1) & PAGE_MASK; + + if (start_page == end_page) { + /* the first and last bytes are on the same page */ + flush_icache_page_range(start, end); + } else if (start_page + 1 == end_page) { + /* split over two virtually contiguous pages */ + flush_icache_page_range(start, end_page); + flush_icache_page_range(end_page, end); + } else { + /* more than 2 pages; just flush the entire cache */ + mn10300_dcache_flush(); + mn10300_icache_inv(); + smp_cache_call(SMP_IDCACHE_INV_FLUSH, 0, 0); + } + +done: + smp_unlock_cache(flags); +} +EXPORT_SYMBOL(flush_icache_range); diff --git a/arch/mn10300/mm/cache-flush-mn10300.S b/arch/mn10300/mm/cache-flush-mn10300.S deleted file mode 100644 index c8ed1cbac107..000000000000 --- a/arch/mn10300/mm/cache-flush-mn10300.S +++ /dev/null @@ -1,192 +0,0 @@ -/* MN10300 CPU core caching routines - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include - - .am33_2 - .globl mn10300_dcache_flush - .globl mn10300_dcache_flush_page - .globl mn10300_dcache_flush_range - .globl mn10300_dcache_flush_range2 - .globl mn10300_dcache_flush_inv - .globl mn10300_dcache_flush_inv_page - .globl mn10300_dcache_flush_inv_range - .globl mn10300_dcache_flush_inv_range2 - -############################################################################### -# -# void mn10300_dcache_flush(void) -# Flush the entire data cache back to RAM -# -############################################################################### - ALIGN -mn10300_dcache_flush: - movhu (CHCTR),d0 - btst CHCTR_DCEN,d0 - beq mn10300_dcache_flush_end - - # read the addresses tagged in the cache's tag RAM and attempt to flush - # those addresses specifically - # - we rely on the hardware to filter out invalid tag entry addresses - mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address - mov DCACHE_PURGE(0,0),a1 # dcache purge request address - mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries - -mn10300_dcache_flush_loop: - mov (a0),d0 - and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 - or L1_CACHE_TAG_VALID,d0 # retain valid entries in the - # cache - mov d0,(a1) # conditional purge - -mn10300_dcache_flush_skip: - add L1_CACHE_BYTES,a0 - add L1_CACHE_BYTES,a1 - add -1,d1 - bne mn10300_dcache_flush_loop - -mn10300_dcache_flush_end: - ret [],0 - -############################################################################### -# -# void mn10300_dcache_flush_page(unsigned start) -# void mn10300_dcache_flush_range(unsigned start, unsigned end) -# void mn10300_dcache_flush_range2(unsigned start, unsigned size) -# Flush a range of addresses on a page in the dcache -# -############################################################################### - ALIGN -mn10300_dcache_flush_page: - mov PAGE_SIZE,d1 -mn10300_dcache_flush_range2: - add d0,d1 -mn10300_dcache_flush_range: - movm [d2,d3],(sp) - - movhu (CHCTR),d2 - btst CHCTR_DCEN,d2 - beq mn10300_dcache_flush_range_end - - # round start addr down - and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 - mov d0,a1 - - add L1_CACHE_BYTES,d1 # round end addr up - and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 - - # write a request to flush all instances of an address from the cache - mov DCACHE_PURGE(0,0),a0 - mov a1,d0 - and L1_CACHE_TAG_ENTRY,d0 - add d0,a0 # starting dcache purge control - # reg address - - sub a1,d1 - lsr L1_CACHE_SHIFT,d1 # total number of entries to - # examine - - or L1_CACHE_TAG_VALID,a1 # retain valid entries in the - # cache - -mn10300_dcache_flush_range_loop: - mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line - # all ways - - add L1_CACHE_BYTES,a0 - add L1_CACHE_BYTES,a1 - and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0 - add -1,d1 - bne mn10300_dcache_flush_range_loop - -mn10300_dcache_flush_range_end: - ret [d2,d3],8 - -############################################################################### -# -# void mn10300_dcache_flush_inv(void) -# Flush the entire data cache and invalidate all entries -# -############################################################################### - ALIGN -mn10300_dcache_flush_inv: - movhu (CHCTR),d0 - btst CHCTR_DCEN,d0 - beq mn10300_dcache_flush_inv_end - - # hit each line in the dcache with an unconditional purge - mov DCACHE_PURGE(0,0),a1 # dcache purge request address - mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries - -mn10300_dcache_flush_inv_loop: - mov (a1),d0 # unconditional purge - - add L1_CACHE_BYTES,a1 - add -1,d1 - bne mn10300_dcache_flush_inv_loop - -mn10300_dcache_flush_inv_end: - ret [],0 - -############################################################################### -# -# void mn10300_dcache_flush_inv_page(unsigned start) -# void mn10300_dcache_flush_inv_range(unsigned start, unsigned end) -# void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size) -# Flush and invalidate a range of addresses on a page in the dcache -# -############################################################################### - ALIGN -mn10300_dcache_flush_inv_page: - mov PAGE_SIZE,d1 -mn10300_dcache_flush_inv_range2: - add d0,d1 -mn10300_dcache_flush_inv_range: - movm [d2,d3],(sp) - movhu (CHCTR),d2 - btst CHCTR_DCEN,d2 - beq mn10300_dcache_flush_inv_range_end - - and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start - # addr down - mov d0,a1 - - add L1_CACHE_BYTES,d1 # round end addr up - and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 - - # write a request to flush and invalidate all instances of an address - # from the cache - mov DCACHE_PURGE(0,0),a0 - mov a1,d0 - and L1_CACHE_TAG_ENTRY,d0 - add d0,a0 # starting dcache purge control - # reg address - - sub a1,d1 - lsr L1_CACHE_SHIFT,d1 # total number of entries to - # examine - -mn10300_dcache_flush_inv_range_loop: - mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line - # in all ways - - add L1_CACHE_BYTES,a0 - add L1_CACHE_BYTES,a1 - and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0 - add -1,d1 - bne mn10300_dcache_flush_inv_range_loop - -mn10300_dcache_flush_inv_range_end: - ret [d2,d3],8 diff --git a/arch/mn10300/mm/cache-inv-by-reg.S b/arch/mn10300/mm/cache-inv-by-reg.S new file mode 100644 index 000000000000..c8950861ed77 --- /dev/null +++ b/arch/mn10300/mm/cache-inv-by-reg.S @@ -0,0 +1,356 @@ +/* MN10300 CPU cache invalidation routines, using automatic purge registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include + +#define mn10300_local_dcache_inv_range_intr_interval \ + +((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1) + +#if mn10300_local_dcache_inv_range_intr_interval > 0xff +#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less +#endif + + .am33_2 + +#ifndef CONFIG_SMP + .globl mn10300_icache_inv + .globl mn10300_icache_inv_page + .globl mn10300_icache_inv_range + .globl mn10300_icache_inv_range2 + .globl mn10300_dcache_inv + .globl mn10300_dcache_inv_page + .globl mn10300_dcache_inv_range + .globl mn10300_dcache_inv_range2 + +mn10300_icache_inv = mn10300_local_icache_inv +mn10300_icache_inv_page = mn10300_local_icache_inv_page +mn10300_icache_inv_range = mn10300_local_icache_inv_range +mn10300_icache_inv_range2 = mn10300_local_icache_inv_range2 +mn10300_dcache_inv = mn10300_local_dcache_inv +mn10300_dcache_inv_page = mn10300_local_dcache_inv_page +mn10300_dcache_inv_range = mn10300_local_dcache_inv_range +mn10300_dcache_inv_range2 = mn10300_local_dcache_inv_range2 + +#endif /* !CONFIG_SMP */ + +############################################################################### +# +# void mn10300_local_icache_inv(void) +# Invalidate the entire icache +# +############################################################################### + ALIGN + .globl mn10300_local_icache_inv + .type mn10300_local_icache_inv,@function +mn10300_local_icache_inv: + mov CHCTR,a0 + + movhu (a0),d0 + btst CHCTR_ICEN,d0 + beq mn10300_local_icache_inv_end + + # invalidate + or CHCTR_ICINV,d0 + movhu d0,(a0) + movhu (a0),d0 + +mn10300_local_icache_inv_end: + ret [],0 + .size mn10300_local_icache_inv,.-mn10300_local_icache_inv + +############################################################################### +# +# void mn10300_local_dcache_inv(void) +# Invalidate the entire dcache +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_inv + .type mn10300_local_dcache_inv,@function +mn10300_local_dcache_inv: + mov CHCTR,a0 + + movhu (a0),d0 + btst CHCTR_DCEN,d0 + beq mn10300_local_dcache_inv_end + + # invalidate + or CHCTR_DCINV,d0 + movhu d0,(a0) + movhu (a0),d0 + +mn10300_local_dcache_inv_end: + ret [],0 + .size mn10300_local_dcache_inv,.-mn10300_local_dcache_inv + +############################################################################### +# +# void mn10300_local_dcache_inv_range(unsigned long start, unsigned long end) +# void mn10300_local_dcache_inv_range2(unsigned long start, unsigned long size) +# void mn10300_local_dcache_inv_page(unsigned long start) +# Invalidate a range of addresses on a page in the dcache +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_inv_page + .globl mn10300_local_dcache_inv_range + .globl mn10300_local_dcache_inv_range2 + .type mn10300_local_dcache_inv_page,@function + .type mn10300_local_dcache_inv_range,@function + .type mn10300_local_dcache_inv_range2,@function +mn10300_local_dcache_inv_page: + and ~(PAGE_SIZE-1),d0 + mov PAGE_SIZE,d1 +mn10300_local_dcache_inv_range2: + add d0,d1 +mn10300_local_dcache_inv_range: + # If we are in writeback mode we check the start and end alignments, + # and if they're not cacheline-aligned, we must flush any bits outside + # the range that share cachelines with stuff inside the range +#ifdef CONFIG_MN10300_CACHE_WBACK + btst ~(L1_CACHE_BYTES-1),d0 + bne 1f + btst ~(L1_CACHE_BYTES-1),d1 + beq 2f +1: + bra mn10300_local_dcache_flush_inv_range +2: +#endif /* CONFIG_MN10300_CACHE_WBACK */ + + movm [d2,d3,a2],(sp) + + mov CHCTR,a0 + movhu (a0),d2 + btst CHCTR_DCEN,d2 + beq mn10300_local_dcache_inv_range_end + + # round the addresses out to be full cachelines, unless we're in + # writeback mode, in which case we would be in flush and invalidate by + # now +#ifndef CONFIG_MN10300_CACHE_WBACK + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start + # addr down + + mov L1_CACHE_BYTES-1,d2 + add d2,d1 + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 # round end addr up +#endif /* !CONFIG_MN10300_CACHE_WBACK */ + + sub d0,d1,d2 # calculate the total size + mov d0,a2 # A2 = start address + mov d1,a1 # A1 = end address + + LOCAL_CLI_SAVE(d3) + + mov DCPGCR,a0 # make sure the purger isn't busy + setlb + mov (a0),d0 + btst DCPGCR_DCPGBSY,d0 + lne + + # skip initial address alignment calculation if address is zero + mov d2,d1 + cmp 0,a2 + beq 1f + +dcivloop: + /* calculate alignsize + * + * alignsize = L1_CACHE_BYTES; + * while (! start & alignsize) { + * alignsize <<=1; + * } + * d1 = alignsize; + */ + mov L1_CACHE_BYTES,d1 + lsr 1,d1 + setlb + add d1,d1 + mov d1,d0 + and a2,d0 + leq + +1: + /* calculate invsize + * + * if (totalsize > alignsize) { + * invsize = alignsize; + * } else { + * invsize = totalsize; + * tmp = 0x80000000; + * while (! invsize & tmp) { + * tmp >>= 1; + * } + * invsize = tmp; + * } + * d1 = invsize + */ + cmp d2,d1 + bns 2f + mov d2,d1 + + mov 0x80000000,d0 # start from 31bit=1 + setlb + lsr 1,d0 + mov d0,e0 + and d1,e0 + leq + mov d0,d1 + +2: + /* set mask + * + * mask = ~(invsize-1); + * DCPGMR = mask; + */ + mov d1,d0 + add -1,d0 + not d0 + mov d0,(DCPGMR) + + # invalidate area + mov a2,d0 + or DCPGCR_DCI,d0 + mov d0,(a0) # DCPGCR = (mask & start) | DCPGCR_DCI + + setlb # wait for the purge to complete + mov (a0),d0 + btst DCPGCR_DCPGBSY,d0 + lne + + sub d1,d2 # decrease size remaining + add d1,a2 # increase next start address + + /* check invalidating of end address + * + * a2 = a2 + invsize + * if (a2 < end) { + * goto dcivloop; + * } */ + cmp a1,a2 + bns dcivloop + + LOCAL_IRQ_RESTORE(d3) + +mn10300_local_dcache_inv_range_end: + ret [d2,d3,a2],12 + .size mn10300_local_dcache_inv_page,.-mn10300_local_dcache_inv_page + .size mn10300_local_dcache_inv_range,.-mn10300_local_dcache_inv_range + .size mn10300_local_dcache_inv_range2,.-mn10300_local_dcache_inv_range2 + +############################################################################### +# +# void mn10300_local_icache_inv_page(unsigned long start) +# void mn10300_local_icache_inv_range2(unsigned long start, unsigned long size) +# void mn10300_local_icache_inv_range(unsigned long start, unsigned long end) +# Invalidate a range of addresses on a page in the icache +# +############################################################################### + ALIGN + .globl mn10300_local_icache_inv_page + .globl mn10300_local_icache_inv_range + .globl mn10300_local_icache_inv_range2 + .type mn10300_local_icache_inv_page,@function + .type mn10300_local_icache_inv_range,@function + .type mn10300_local_icache_inv_range2,@function +mn10300_local_icache_inv_page: + and ~(PAGE_SIZE-1),d0 + mov PAGE_SIZE,d1 +mn10300_local_icache_inv_range2: + add d0,d1 +mn10300_local_icache_inv_range: + movm [d2,d3,a2],(sp) + + mov CHCTR,a0 + movhu (a0),d2 + btst CHCTR_ICEN,d2 + beq mn10300_local_icache_inv_range_reg_end + + /* calculate alignsize + * + * alignsize = L1_CACHE_BYTES; + * for (i = (end - start - 1) / L1_CACHE_BYTES ; i > 0; i >>= 1) { + * alignsize <<= 1; + * } + * d2 = alignsize; + */ + mov L1_CACHE_BYTES,d2 + sub d0,d1,d3 + add -1,d3 + lsr L1_CACHE_SHIFT,d3 + beq 2f +1: + add d2,d2 + lsr 1,d3 + bne 1b +2: + + /* a1 = end */ + mov d1,a1 + + LOCAL_CLI_SAVE(d3) + + mov ICIVCR,a0 + /* wait for busy bit of area invalidation */ + setlb + mov (a0),d1 + btst ICIVCR_ICIVBSY,d1 + lne + + /* set mask + * + * mask = ~(alignsize-1); + * ICIVMR = mask; + */ + mov d2,d1 + add -1,d1 + not d1 + mov d1,(ICIVMR) + /* a2 = mask & start */ + and d1,d0,a2 + +icivloop: + /* area invalidate + * + * ICIVCR = (mask & start) | ICIVCR_ICI + */ + mov a2,d0 + or ICIVCR_ICI,d0 + mov d0,(a0) + + /* wait for busy bit of area invalidation */ + setlb + mov (a0),d1 + btst ICIVCR_ICIVBSY,d1 + lne + + /* check invalidating of end address + * + * a2 = a2 + alignsize + * if (a2 < end) { + * goto icivloop; + * } */ + add d2,a2 + cmp a1,a2 + bns icivloop + + LOCAL_IRQ_RESTORE(d3) + +mn10300_local_icache_inv_range_reg_end: + ret [d2,d3,a2],12 + .size mn10300_local_icache_inv_page,.-mn10300_local_icache_inv_page + .size mn10300_local_icache_inv_range,.-mn10300_local_icache_inv_range + .size mn10300_local_icache_inv_range2,.-mn10300_local_icache_inv_range2 diff --git a/arch/mn10300/mm/cache-inv-by-tag.S b/arch/mn10300/mm/cache-inv-by-tag.S new file mode 100644 index 000000000000..e9713b40c0ff --- /dev/null +++ b/arch/mn10300/mm/cache-inv-by-tag.S @@ -0,0 +1,348 @@ +/* MN10300 CPU core caching routines + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include + +#define mn10300_local_dcache_inv_range_intr_interval \ + +((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1) + +#if mn10300_local_dcache_inv_range_intr_interval > 0xff +#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less +#endif + + .am33_2 + + .globl mn10300_local_icache_inv_page + .globl mn10300_local_icache_inv_range + .globl mn10300_local_icache_inv_range2 + +mn10300_local_icache_inv_page = mn10300_local_icache_inv +mn10300_local_icache_inv_range = mn10300_local_icache_inv +mn10300_local_icache_inv_range2 = mn10300_local_icache_inv + +#ifndef CONFIG_SMP + .globl mn10300_icache_inv + .globl mn10300_icache_inv_page + .globl mn10300_icache_inv_range + .globl mn10300_icache_inv_range2 + .globl mn10300_dcache_inv + .globl mn10300_dcache_inv_page + .globl mn10300_dcache_inv_range + .globl mn10300_dcache_inv_range2 + +mn10300_icache_inv = mn10300_local_icache_inv +mn10300_icache_inv_page = mn10300_local_icache_inv_page +mn10300_icache_inv_range = mn10300_local_icache_inv_range +mn10300_icache_inv_range2 = mn10300_local_icache_inv_range2 +mn10300_dcache_inv = mn10300_local_dcache_inv +mn10300_dcache_inv_page = mn10300_local_dcache_inv_page +mn10300_dcache_inv_range = mn10300_local_dcache_inv_range +mn10300_dcache_inv_range2 = mn10300_local_dcache_inv_range2 + +#endif /* !CONFIG_SMP */ + +############################################################################### +# +# void mn10300_local_icache_inv(void) +# Invalidate the entire icache +# +############################################################################### + ALIGN + .globl mn10300_local_icache_inv + .type mn10300_local_icache_inv,@function +mn10300_local_icache_inv: + mov CHCTR,a0 + + movhu (a0),d0 + btst CHCTR_ICEN,d0 + beq mn10300_local_icache_inv_end + +#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3) + LOCAL_CLI_SAVE(d1) + + # disable the icache + and ~CHCTR_ICEN,d0 + movhu d0,(a0) + + # and wait for it to calm down + setlb + movhu (a0),d0 + btst CHCTR_ICBUSY,d0 + lne + + # invalidate + or CHCTR_ICINV,d0 + movhu d0,(a0) + + # wait for the cache to finish + mov CHCTR,a0 + setlb + movhu (a0),d0 + btst CHCTR_ICBUSY,d0 + lne + + # and reenable it + and ~CHCTR_ICINV,d0 + or CHCTR_ICEN,d0 + movhu d0,(a0) + movhu (a0),d0 + + LOCAL_IRQ_RESTORE(d1) +#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */ + # invalidate + or CHCTR_ICINV,d0 + movhu d0,(a0) + movhu (a0),d0 +#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */ + +mn10300_local_icache_inv_end: + ret [],0 + .size mn10300_local_icache_inv,.-mn10300_local_icache_inv + +############################################################################### +# +# void mn10300_local_dcache_inv(void) +# Invalidate the entire dcache +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_inv + .type mn10300_local_dcache_inv,@function +mn10300_local_dcache_inv: + mov CHCTR,a0 + + movhu (a0),d0 + btst CHCTR_DCEN,d0 + beq mn10300_local_dcache_inv_end + +#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3) + LOCAL_CLI_SAVE(d1) + + # disable the dcache + and ~CHCTR_DCEN,d0 + movhu d0,(a0) + + # and wait for it to calm down + setlb + movhu (a0),d0 + btst CHCTR_DCBUSY,d0 + lne + + # invalidate + or CHCTR_DCINV,d0 + movhu d0,(a0) + + # wait for the cache to finish + mov CHCTR,a0 + setlb + movhu (a0),d0 + btst CHCTR_DCBUSY,d0 + lne + + # and reenable it + and ~CHCTR_DCINV,d0 + or CHCTR_DCEN,d0 + movhu d0,(a0) + movhu (a0),d0 + + LOCAL_IRQ_RESTORE(d1) +#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */ + # invalidate + or CHCTR_DCINV,d0 + movhu d0,(a0) + movhu (a0),d0 +#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */ + +mn10300_local_dcache_inv_end: + ret [],0 + .size mn10300_local_dcache_inv,.-mn10300_local_dcache_inv + +############################################################################### +# +# void mn10300_local_dcache_inv_range(unsigned long start, unsigned long end) +# void mn10300_local_dcache_inv_range2(unsigned long start, unsigned long size) +# void mn10300_local_dcache_inv_page(unsigned long start) +# Invalidate a range of addresses on a page in the dcache +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_inv_page + .globl mn10300_local_dcache_inv_range + .globl mn10300_local_dcache_inv_range2 + .type mn10300_local_dcache_inv_page,@function + .type mn10300_local_dcache_inv_range,@function + .type mn10300_local_dcache_inv_range2,@function +mn10300_local_dcache_inv_page: + and ~(PAGE_SIZE-1),d0 + mov PAGE_SIZE,d1 +mn10300_local_dcache_inv_range2: + add d0,d1 +mn10300_local_dcache_inv_range: + # If we are in writeback mode we check the start and end alignments, + # and if they're not cacheline-aligned, we must flush any bits outside + # the range that share cachelines with stuff inside the range +#ifdef CONFIG_MN10300_CACHE_WBACK + btst ~(L1_CACHE_BYTES-1),d0 + bne 1f + btst ~(L1_CACHE_BYTES-1),d1 + beq 2f +1: + bra mn10300_local_dcache_flush_inv_range +2: +#endif /* CONFIG_MN10300_CACHE_WBACK */ + + movm [d2,d3,a2],(sp) + + mov CHCTR,a2 + movhu (a2),d2 + btst CHCTR_DCEN,d2 + beq mn10300_local_dcache_inv_range_end + +#ifndef CONFIG_MN10300_CACHE_WBACK + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start + # addr down + + add L1_CACHE_BYTES,d1 # round end addr up + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 +#endif /* !CONFIG_MN10300_CACHE_WBACK */ + mov d0,a1 + + clr d2 # we're going to clear tag RAM + # entries + + # read the tags from the tag RAM, and if they indicate a valid dirty + # cache line then invalidate that line + mov DCACHE_TAG(0,0),a0 + mov a1,d0 + and L1_CACHE_TAG_ENTRY,d0 + add d0,a0 # starting dcache tag RAM + # access address + + sub a1,d1 + lsr L1_CACHE_SHIFT,d1 # total number of entries to + # examine + + and ~(L1_CACHE_DISPARITY-1),a1 # determine comparator base + +mn10300_local_dcache_inv_range_outer_loop: + LOCAL_CLI_SAVE(d3) + + # disable the dcache + movhu (a2),d0 + and ~CHCTR_DCEN,d0 + movhu d0,(a2) + + # and wait for it to calm down + setlb + movhu (a2),d0 + btst CHCTR_DCBUSY,d0 + lne + +mn10300_local_dcache_inv_range_loop: + + # process the way 0 slot + mov (L1_CACHE_WAYDISP*0,a0),d0 # read the tag in the way 0 slot + btst L1_CACHE_TAG_VALID,d0 + beq mn10300_local_dcache_inv_range_skip_0 # jump if this cacheline + # is not valid + + xor a1,d0 + lsr 12,d0 + bne mn10300_local_dcache_inv_range_skip_0 # jump if not this cacheline + + mov d2,(L1_CACHE_WAYDISP*0,a0) # kill the tag + +mn10300_local_dcache_inv_range_skip_0: + + # process the way 1 slot + mov (L1_CACHE_WAYDISP*1,a0),d0 # read the tag in the way 1 slot + btst L1_CACHE_TAG_VALID,d0 + beq mn10300_local_dcache_inv_range_skip_1 # jump if this cacheline + # is not valid + + xor a1,d0 + lsr 12,d0 + bne mn10300_local_dcache_inv_range_skip_1 # jump if not this cacheline + + mov d2,(L1_CACHE_WAYDISP*1,a0) # kill the tag + +mn10300_local_dcache_inv_range_skip_1: + + # process the way 2 slot + mov (L1_CACHE_WAYDISP*2,a0),d0 # read the tag in the way 2 slot + btst L1_CACHE_TAG_VALID,d0 + beq mn10300_local_dcache_inv_range_skip_2 # jump if this cacheline + # is not valid + + xor a1,d0 + lsr 12,d0 + bne mn10300_local_dcache_inv_range_skip_2 # jump if not this cacheline + + mov d2,(L1_CACHE_WAYDISP*2,a0) # kill the tag + +mn10300_local_dcache_inv_range_skip_2: + + # process the way 3 slot + mov (L1_CACHE_WAYDISP*3,a0),d0 # read the tag in the way 3 slot + btst L1_CACHE_TAG_VALID,d0 + beq mn10300_local_dcache_inv_range_skip_3 # jump if this cacheline + # is not valid + + xor a1,d0 + lsr 12,d0 + bne mn10300_local_dcache_inv_range_skip_3 # jump if not this cacheline + + mov d2,(L1_CACHE_WAYDISP*3,a0) # kill the tag + +mn10300_local_dcache_inv_range_skip_3: + + # approx every N steps we re-enable the cache and see if there are any + # interrupts to be processed + # we also break out if we've reached the end of the loop + # (the bottom nibble of the count is zero in both cases) + add L1_CACHE_BYTES,a0 + add L1_CACHE_BYTES,a1 + and ~L1_CACHE_WAYDISP,a0 + add -1,d1 + btst mn10300_local_dcache_inv_range_intr_interval,d1 + bne mn10300_local_dcache_inv_range_loop + + # wait for the cache to finish what it's doing + setlb + movhu (a2),d0 + btst CHCTR_DCBUSY,d0 + lne + + # and reenable it + or CHCTR_DCEN,d0 + movhu d0,(a2) + movhu (a2),d0 + + # re-enable interrupts + # - we don't bother with delay NOPs as we'll have enough instructions + # before we disable interrupts again to give the interrupts a chance + # to happen + LOCAL_IRQ_RESTORE(d3) + + # go around again if the counter hasn't yet reached zero + add 0,d1 + bne mn10300_local_dcache_inv_range_outer_loop + +mn10300_local_dcache_inv_range_end: + ret [d2,d3,a2],12 + .size mn10300_local_dcache_inv_page,.-mn10300_local_dcache_inv_page + .size mn10300_local_dcache_inv_range,.-mn10300_local_dcache_inv_range + .size mn10300_local_dcache_inv_range2,.-mn10300_local_dcache_inv_range2 diff --git a/arch/mn10300/mm/cache-inv-icache.c b/arch/mn10300/mm/cache-inv-icache.c new file mode 100644 index 000000000000..a8933a60b2d4 --- /dev/null +++ b/arch/mn10300/mm/cache-inv-icache.c @@ -0,0 +1,129 @@ +/* Invalidate icache when dcache doesn't need invalidation as it's in + * write-through mode + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include +#include +#include "cache-smp.h" + +/** + * flush_icache_page_range - Flush dcache and invalidate icache for part of a + * single page + * @start: The starting virtual address of the page part. + * @end: The ending virtual address of the page part. + * + * Invalidate the icache for part of a single page, as determined by the + * virtual addresses given. The page must be in the paged area. The dcache is + * not flushed as the cache must be in write-through mode to get here. + */ +static void flush_icache_page_range(unsigned long start, unsigned long end) +{ + unsigned long addr, size, off; + struct page *page; + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *ppte, pte; + + /* work out how much of the page to flush */ + off = start & ~PAGE_MASK; + size = end - start; + + /* get the physical address the page is mapped to from the page + * tables */ + pgd = pgd_offset(current->mm, start); + if (!pgd || !pgd_val(*pgd)) + return; + + pud = pud_offset(pgd, start); + if (!pud || !pud_val(*pud)) + return; + + pmd = pmd_offset(pud, start); + if (!pmd || !pmd_val(*pmd)) + return; + + ppte = pte_offset_map(pmd, start); + if (!ppte) + return; + pte = *ppte; + pte_unmap(ppte); + + if (pte_none(pte)) + return; + + page = pte_page(pte); + if (!page) + return; + + addr = page_to_phys(page); + + /* invalidate the icache coverage on that region */ + mn10300_local_icache_inv_range2(addr + off, size); + smp_cache_call(SMP_ICACHE_INV_FLUSH_RANGE, start, end); +} + +/** + * flush_icache_range - Globally flush dcache and invalidate icache for region + * @start: The starting virtual address of the region. + * @end: The ending virtual address of the region. + * + * This is used by the kernel to globally flush some code it has just written + * from the dcache back to RAM and then to globally invalidate the icache over + * that region so that that code can be run on all CPUs in the system. + */ +void flush_icache_range(unsigned long start, unsigned long end) +{ + unsigned long start_page, end_page; + unsigned long flags; + + flags = smp_lock_cache(); + + if (end > 0x80000000UL) { + /* addresses above 0xa0000000 do not go through the cache */ + if (end > 0xa0000000UL) { + end = 0xa0000000UL; + if (start >= end) + goto done; + } + + /* kernel addresses between 0x80000000 and 0x9fffffff do not + * require page tables, so we just map such addresses + * directly */ + start_page = (start >= 0x80000000UL) ? start : 0x80000000UL; + mn10300_icache_inv_range(start_page, end); + smp_cache_call(SMP_ICACHE_INV_FLUSH_RANGE, start, end); + if (start_page == start) + goto done; + end = start_page; + } + + start_page = start & PAGE_MASK; + end_page = (end - 1) & PAGE_MASK; + + if (start_page == end_page) { + /* the first and last bytes are on the same page */ + flush_icache_page_range(start, end); + } else if (start_page + 1 == end_page) { + /* split over two virtually contiguous pages */ + flush_icache_page_range(start, end_page); + flush_icache_page_range(end_page, end); + } else { + /* more than 2 pages; just flush the entire cache */ + mn10300_local_icache_inv(); + smp_cache_call(SMP_ICACHE_INV, 0, 0); + } + +done: + smp_unlock_cache(flags); +} +EXPORT_SYMBOL(flush_icache_range); diff --git a/arch/mn10300/mm/cache-mn10300.S b/arch/mn10300/mm/cache-mn10300.S deleted file mode 100644 index e839d0aedd69..000000000000 --- a/arch/mn10300/mm/cache-mn10300.S +++ /dev/null @@ -1,289 +0,0 @@ -/* MN10300 CPU core caching routines - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include - -#define mn10300_dcache_inv_range_intr_interval \ - +((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1) - -#if mn10300_dcache_inv_range_intr_interval > 0xff -#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less -#endif - - .am33_2 - - .globl mn10300_icache_inv - .globl mn10300_dcache_inv - .globl mn10300_dcache_inv_range - .globl mn10300_dcache_inv_range2 - .globl mn10300_dcache_inv_page - -############################################################################### -# -# void mn10300_icache_inv(void) -# Invalidate the entire icache -# -############################################################################### - ALIGN -mn10300_icache_inv: - mov CHCTR,a0 - - movhu (a0),d0 - btst CHCTR_ICEN,d0 - beq mn10300_icache_inv_end - - mov epsw,d1 - and ~EPSW_IE,epsw - nop - nop - - # disable the icache - and ~CHCTR_ICEN,d0 - movhu d0,(a0) - - # and wait for it to calm down - setlb - movhu (a0),d0 - btst CHCTR_ICBUSY,d0 - lne - - # invalidate - or CHCTR_ICINV,d0 - movhu d0,(a0) - - # wait for the cache to finish - mov CHCTR,a0 - setlb - movhu (a0),d0 - btst CHCTR_ICBUSY,d0 - lne - - # and reenable it - and ~CHCTR_ICINV,d0 - or CHCTR_ICEN,d0 - movhu d0,(a0) - movhu (a0),d0 - - mov d1,epsw - -mn10300_icache_inv_end: - ret [],0 - -############################################################################### -# -# void mn10300_dcache_inv(void) -# Invalidate the entire dcache -# -############################################################################### - ALIGN -mn10300_dcache_inv: - mov CHCTR,a0 - - movhu (a0),d0 - btst CHCTR_DCEN,d0 - beq mn10300_dcache_inv_end - - mov epsw,d1 - and ~EPSW_IE,epsw - nop - nop - - # disable the dcache - and ~CHCTR_DCEN,d0 - movhu d0,(a0) - - # and wait for it to calm down - setlb - movhu (a0),d0 - btst CHCTR_DCBUSY,d0 - lne - - # invalidate - or CHCTR_DCINV,d0 - movhu d0,(a0) - - # wait for the cache to finish - mov CHCTR,a0 - setlb - movhu (a0),d0 - btst CHCTR_DCBUSY,d0 - lne - - # and reenable it - and ~CHCTR_DCINV,d0 - or CHCTR_DCEN,d0 - movhu d0,(a0) - movhu (a0),d0 - - mov d1,epsw - -mn10300_dcache_inv_end: - ret [],0 - -############################################################################### -# -# void mn10300_dcache_inv_range(unsigned start, unsigned end) -# void mn10300_dcache_inv_range2(unsigned start, unsigned size) -# void mn10300_dcache_inv_page(unsigned start) -# Invalidate a range of addresses on a page in the dcache -# -############################################################################### - ALIGN -mn10300_dcache_inv_page: - mov PAGE_SIZE,d1 -mn10300_dcache_inv_range2: - add d0,d1 -mn10300_dcache_inv_range: - movm [d2,d3,a2],(sp) - mov CHCTR,a2 - - movhu (a2),d2 - btst CHCTR_DCEN,d2 - beq mn10300_dcache_inv_range_end - - and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start - # addr down - mov d0,a1 - - add L1_CACHE_BYTES,d1 # round end addr up - and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 - - clr d2 # we're going to clear tag ram - # entries - - # read the tags from the tag RAM, and if they indicate a valid dirty - # cache line then invalidate that line - mov DCACHE_TAG(0,0),a0 - mov a1,d0 - and L1_CACHE_TAG_ENTRY,d0 - add d0,a0 # starting dcache tag RAM - # access address - - sub a1,d1 - lsr L1_CACHE_SHIFT,d1 # total number of entries to - # examine - - and ~(L1_CACHE_DISPARITY-1),a1 # determine comparator base - -mn10300_dcache_inv_range_outer_loop: - # disable interrupts - mov epsw,d3 - and ~EPSW_IE,epsw - nop # note that reading CHCTR and - # AND'ing D0 occupy two delay - # slots after disabling - # interrupts - - # disable the dcache - movhu (a2),d0 - and ~CHCTR_DCEN,d0 - movhu d0,(a2) - - # and wait for it to calm down - setlb - movhu (a2),d0 - btst CHCTR_DCBUSY,d0 - lne - -mn10300_dcache_inv_range_loop: - - # process the way 0 slot - mov (L1_CACHE_WAYDISP*0,a0),d0 # read the tag in the way 0 slot - btst L1_CACHE_TAG_VALID,d0 - beq mn10300_dcache_inv_range_skip_0 # jump if this cacheline is not - # valid - - xor a1,d0 - lsr 12,d0 - bne mn10300_dcache_inv_range_skip_0 # jump if not this cacheline - - mov d2,(a0) # kill the tag - -mn10300_dcache_inv_range_skip_0: - - # process the way 1 slot - mov (L1_CACHE_WAYDISP*1,a0),d0 # read the tag in the way 1 slot - btst L1_CACHE_TAG_VALID,d0 - beq mn10300_dcache_inv_range_skip_1 # jump if this cacheline is not - # valid - - xor a1,d0 - lsr 12,d0 - bne mn10300_dcache_inv_range_skip_1 # jump if not this cacheline - - mov d2,(a0) # kill the tag - -mn10300_dcache_inv_range_skip_1: - - # process the way 2 slot - mov (L1_CACHE_WAYDISP*2,a0),d0 # read the tag in the way 2 slot - btst L1_CACHE_TAG_VALID,d0 - beq mn10300_dcache_inv_range_skip_2 # jump if this cacheline is not - # valid - - xor a1,d0 - lsr 12,d0 - bne mn10300_dcache_inv_range_skip_2 # jump if not this cacheline - - mov d2,(a0) # kill the tag - -mn10300_dcache_inv_range_skip_2: - - # process the way 3 slot - mov (L1_CACHE_WAYDISP*3,a0),d0 # read the tag in the way 3 slot - btst L1_CACHE_TAG_VALID,d0 - beq mn10300_dcache_inv_range_skip_3 # jump if this cacheline is not - # valid - - xor a1,d0 - lsr 12,d0 - bne mn10300_dcache_inv_range_skip_3 # jump if not this cacheline - - mov d2,(a0) # kill the tag - -mn10300_dcache_inv_range_skip_3: - - # approx every N steps we re-enable the cache and see if there are any - # interrupts to be processed - # we also break out if we've reached the end of the loop - # (the bottom nibble of the count is zero in both cases) - add L1_CACHE_BYTES,a0 - add L1_CACHE_BYTES,a1 - add -1,d1 - btst mn10300_dcache_inv_range_intr_interval,d1 - bne mn10300_dcache_inv_range_loop - - # wait for the cache to finish what it's doing - setlb - movhu (a2),d0 - btst CHCTR_DCBUSY,d0 - lne - - # and reenable it - or CHCTR_DCEN,d0 - movhu d0,(a2) - movhu (a2),d0 - - # re-enable interrupts - # - we don't bother with delay NOPs as we'll have enough instructions - # before we disable interrupts again to give the interrupts a chance - # to happen - mov d3,epsw - - # go around again if the counter hasn't yet reached zero - add 0,d1 - bne mn10300_dcache_inv_range_outer_loop - -mn10300_dcache_inv_range_end: - ret [d2,d3,a2],12 diff --git a/arch/mn10300/mm/cache-smp-flush.c b/arch/mn10300/mm/cache-smp-flush.c new file mode 100644 index 000000000000..fd51af5eaf70 --- /dev/null +++ b/arch/mn10300/mm/cache-smp-flush.c @@ -0,0 +1,156 @@ +/* Functions for global dcache flush when writeback caching in SMP + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include "cache-smp.h" + +/** + * mn10300_dcache_flush - Globally flush data cache + * + * Flush the data cache on all CPUs. + */ +void mn10300_dcache_flush(void) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_flush(); + smp_cache_call(SMP_DCACHE_FLUSH, 0, 0); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_flush_page - Globally flush a page of data cache + * @start: The address of the page of memory to be flushed. + * + * Flush a range of addresses in the data cache on all CPUs covering + * the page that includes the given address. + */ +void mn10300_dcache_flush_page(unsigned long start) +{ + unsigned long flags; + + start &= ~(PAGE_SIZE-1); + + flags = smp_lock_cache(); + mn10300_local_dcache_flush_page(start); + smp_cache_call(SMP_DCACHE_FLUSH_RANGE, start, start + PAGE_SIZE); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_flush_range - Globally flush range of data cache + * @start: The start address of the region to be flushed. + * @end: The end address of the region to be flushed. + * + * Flush a range of addresses in the data cache on all CPUs, between start and + * end-1 inclusive. + */ +void mn10300_dcache_flush_range(unsigned long start, unsigned long end) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_flush_range(start, end); + smp_cache_call(SMP_DCACHE_FLUSH_RANGE, start, end); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_flush_range2 - Globally flush range of data cache + * @start: The start address of the region to be flushed. + * @size: The size of the region to be flushed. + * + * Flush a range of addresses in the data cache on all CPUs, between start and + * start+size-1 inclusive. + */ +void mn10300_dcache_flush_range2(unsigned long start, unsigned long size) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_flush_range2(start, size); + smp_cache_call(SMP_DCACHE_FLUSH_RANGE, start, start + size); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_flush_inv - Globally flush and invalidate data cache + * + * Flush and invalidate the data cache on all CPUs. + */ +void mn10300_dcache_flush_inv(void) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_flush_inv(); + smp_cache_call(SMP_DCACHE_FLUSH_INV, 0, 0); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_flush_inv_page - Globally flush and invalidate a page of data + * cache + * @start: The address of the page of memory to be flushed and invalidated. + * + * Flush and invalidate a range of addresses in the data cache on all CPUs + * covering the page that includes the given address. + */ +void mn10300_dcache_flush_inv_page(unsigned long start) +{ + unsigned long flags; + + start &= ~(PAGE_SIZE-1); + + flags = smp_lock_cache(); + mn10300_local_dcache_flush_inv_page(start); + smp_cache_call(SMP_DCACHE_FLUSH_INV_RANGE, start, start + PAGE_SIZE); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_flush_inv_range - Globally flush and invalidate range of data + * cache + * @start: The start address of the region to be flushed and invalidated. + * @end: The end address of the region to be flushed and invalidated. + * + * Flush and invalidate a range of addresses in the data cache on all CPUs, + * between start and end-1 inclusive. + */ +void mn10300_dcache_flush_inv_range(unsigned long start, unsigned long end) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_flush_inv_range(start, end); + smp_cache_call(SMP_DCACHE_FLUSH_INV_RANGE, start, end); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_flush_inv_range2 - Globally flush and invalidate range of data + * cache + * @start: The start address of the region to be flushed and invalidated. + * @size: The size of the region to be flushed and invalidated. + * + * Flush and invalidate a range of addresses in the data cache on all CPUs, + * between start and start+size-1 inclusive. + */ +void mn10300_dcache_flush_inv_range2(unsigned long start, unsigned long size) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_flush_inv_range2(start, size); + smp_cache_call(SMP_DCACHE_FLUSH_INV_RANGE, start, start + size); + smp_unlock_cache(flags); +} diff --git a/arch/mn10300/mm/cache-smp-inv.c b/arch/mn10300/mm/cache-smp-inv.c new file mode 100644 index 000000000000..ff1787358c8e --- /dev/null +++ b/arch/mn10300/mm/cache-smp-inv.c @@ -0,0 +1,153 @@ +/* Functions for global i/dcache invalidation when caching in SMP + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include "cache-smp.h" + +/** + * mn10300_icache_inv - Globally invalidate instruction cache + * + * Invalidate the instruction cache on all CPUs. + */ +void mn10300_icache_inv(void) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_icache_inv(); + smp_cache_call(SMP_ICACHE_INV, 0, 0); + smp_unlock_cache(flags); +} + +/** + * mn10300_icache_inv_page - Globally invalidate a page of instruction cache + * @start: The address of the page of memory to be invalidated. + * + * Invalidate a range of addresses in the instruction cache on all CPUs + * covering the page that includes the given address. + */ +void mn10300_icache_inv_page(unsigned long start) +{ + unsigned long flags; + + start &= ~(PAGE_SIZE-1); + + flags = smp_lock_cache(); + mn10300_local_icache_inv_page(start); + smp_cache_call(SMP_ICACHE_INV_RANGE, start, start + PAGE_SIZE); + smp_unlock_cache(flags); +} + +/** + * mn10300_icache_inv_range - Globally invalidate range of instruction cache + * @start: The start address of the region to be invalidated. + * @end: The end address of the region to be invalidated. + * + * Invalidate a range of addresses in the instruction cache on all CPUs, + * between start and end-1 inclusive. + */ +void mn10300_icache_inv_range(unsigned long start, unsigned long end) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_icache_inv_range(start, end); + smp_cache_call(SMP_ICACHE_INV_RANGE, start, end); + smp_unlock_cache(flags); +} + +/** + * mn10300_icache_inv_range2 - Globally invalidate range of instruction cache + * @start: The start address of the region to be invalidated. + * @size: The size of the region to be invalidated. + * + * Invalidate a range of addresses in the instruction cache on all CPUs, + * between start and start+size-1 inclusive. + */ +void mn10300_icache_inv_range2(unsigned long start, unsigned long size) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_icache_inv_range2(start, size); + smp_cache_call(SMP_ICACHE_INV_RANGE, start, start + size); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_inv - Globally invalidate data cache + * + * Invalidate the data cache on all CPUs. + */ +void mn10300_dcache_inv(void) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_inv(); + smp_cache_call(SMP_DCACHE_INV, 0, 0); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_inv_page - Globally invalidate a page of data cache + * @start: The address of the page of memory to be invalidated. + * + * Invalidate a range of addresses in the data cache on all CPUs covering the + * page that includes the given address. + */ +void mn10300_dcache_inv_page(unsigned long start) +{ + unsigned long flags; + + start &= ~(PAGE_SIZE-1); + + flags = smp_lock_cache(); + mn10300_local_dcache_inv_page(start); + smp_cache_call(SMP_DCACHE_INV_RANGE, start, start + PAGE_SIZE); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_inv_range - Globally invalidate range of data cache + * @start: The start address of the region to be invalidated. + * @end: The end address of the region to be invalidated. + * + * Invalidate a range of addresses in the data cache on all CPUs, between start + * and end-1 inclusive. + */ +void mn10300_dcache_inv_range(unsigned long start, unsigned long end) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_inv_range(start, end); + smp_cache_call(SMP_DCACHE_INV_RANGE, start, end); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_inv_range2 - Globally invalidate range of data cache + * @start: The start address of the region to be invalidated. + * @size: The size of the region to be invalidated. + * + * Invalidate a range of addresses in the data cache on all CPUs, between start + * and start+size-1 inclusive. + */ +void mn10300_dcache_inv_range2(unsigned long start, unsigned long size) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_inv_range2(start, size); + smp_cache_call(SMP_DCACHE_INV_RANGE, start, start + size); + smp_unlock_cache(flags); +} diff --git a/arch/mn10300/mm/cache-smp.c b/arch/mn10300/mm/cache-smp.c new file mode 100644 index 000000000000..4a6e9a4b5b27 --- /dev/null +++ b/arch/mn10300/mm/cache-smp.c @@ -0,0 +1,105 @@ +/* SMP global caching code + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "cache-smp.h" + +DEFINE_SPINLOCK(smp_cache_lock); +static unsigned long smp_cache_mask; +static unsigned long smp_cache_start; +static unsigned long smp_cache_end; +static cpumask_t smp_cache_ipi_map; /* Bitmask of cache IPI done CPUs */ + +/** + * smp_cache_interrupt - Handle IPI request to flush caches. + * + * Handle a request delivered by IPI to flush the current CPU's + * caches. The parameters are stored in smp_cache_*. + */ +void smp_cache_interrupt(void) +{ + unsigned long opr_mask = smp_cache_mask; + + switch ((enum smp_dcache_ops)(opr_mask & SMP_DCACHE_OP_MASK)) { + case SMP_DCACHE_NOP: + break; + case SMP_DCACHE_INV: + mn10300_local_dcache_inv(); + break; + case SMP_DCACHE_INV_RANGE: + mn10300_local_dcache_inv_range(smp_cache_start, smp_cache_end); + break; + case SMP_DCACHE_FLUSH: + mn10300_local_dcache_flush(); + break; + case SMP_DCACHE_FLUSH_RANGE: + mn10300_local_dcache_flush_range(smp_cache_start, + smp_cache_end); + break; + case SMP_DCACHE_FLUSH_INV: + mn10300_local_dcache_flush_inv(); + break; + case SMP_DCACHE_FLUSH_INV_RANGE: + mn10300_local_dcache_flush_inv_range(smp_cache_start, + smp_cache_end); + break; + } + + switch ((enum smp_icache_ops)(opr_mask & SMP_ICACHE_OP_MASK)) { + case SMP_ICACHE_NOP: + break; + case SMP_ICACHE_INV: + mn10300_local_icache_inv(); + break; + case SMP_ICACHE_INV_RANGE: + mn10300_local_icache_inv_range(smp_cache_start, smp_cache_end); + break; + } + + cpu_clear(smp_processor_id(), smp_cache_ipi_map); +} + +/** + * smp_cache_call - Issue an IPI to request the other CPUs flush caches + * @opr_mask: Cache operation flags + * @start: Start address of request + * @end: End address of request + * + * Send cache flush IPI to other CPUs. This invokes smp_cache_interrupt() + * above on those other CPUs and then waits for them to finish. + * + * The caller must hold smp_cache_lock. + */ +void smp_cache_call(unsigned long opr_mask, + unsigned long start, unsigned long end) +{ + smp_cache_mask = opr_mask; + smp_cache_start = start; + smp_cache_end = end; + smp_cache_ipi_map = cpu_online_map; + cpu_clear(smp_processor_id(), smp_cache_ipi_map); + + send_IPI_allbutself(FLUSH_CACHE_IPI); + + while (!cpus_empty(smp_cache_ipi_map)) + /* nothing. lockup detection does not belong here */ + mb(); +} diff --git a/arch/mn10300/mm/cache-smp.h b/arch/mn10300/mm/cache-smp.h new file mode 100644 index 000000000000..cb52892aa66a --- /dev/null +++ b/arch/mn10300/mm/cache-smp.h @@ -0,0 +1,69 @@ +/* SMP caching definitions + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + + +/* + * Operation requests for smp_cache_call(). + * + * One of smp_icache_ops and one of smp_dcache_ops can be OR'd together. + */ +enum smp_icache_ops { + SMP_ICACHE_NOP = 0x0000, + SMP_ICACHE_INV = 0x0001, + SMP_ICACHE_INV_RANGE = 0x0002, +}; +#define SMP_ICACHE_OP_MASK 0x0003 + +enum smp_dcache_ops { + SMP_DCACHE_NOP = 0x0000, + SMP_DCACHE_INV = 0x0004, + SMP_DCACHE_INV_RANGE = 0x0008, + SMP_DCACHE_FLUSH = 0x000c, + SMP_DCACHE_FLUSH_RANGE = 0x0010, + SMP_DCACHE_FLUSH_INV = 0x0014, + SMP_DCACHE_FLUSH_INV_RANGE = 0x0018, +}; +#define SMP_DCACHE_OP_MASK 0x001c + +#define SMP_IDCACHE_INV_FLUSH (SMP_ICACHE_INV | SMP_DCACHE_FLUSH) +#define SMP_IDCACHE_INV_FLUSH_RANGE (SMP_ICACHE_INV_RANGE | SMP_DCACHE_FLUSH_RANGE) + +/* + * cache-smp.c + */ +#ifdef CONFIG_SMP +extern spinlock_t smp_cache_lock; + +extern void smp_cache_call(unsigned long opr_mask, + unsigned long addr, unsigned long end); + +static inline unsigned long smp_lock_cache(void) + __acquires(&smp_cache_lock) +{ + unsigned long flags; + spin_lock_irqsave(&smp_cache_lock, flags); + return flags; +} + +static inline void smp_unlock_cache(unsigned long flags) + __releases(&smp_cache_lock) +{ + spin_unlock_irqrestore(&smp_cache_lock, flags); +} + +#else +static inline unsigned long smp_lock_cache(void) { return 0; } +static inline void smp_unlock_cache(unsigned long flags) {} +static inline void smp_cache_call(unsigned long opr_mask, + unsigned long addr, unsigned long end) +{ +} +#endif /* CONFIG_SMP */ diff --git a/arch/mn10300/mm/cache.c b/arch/mn10300/mm/cache.c index 9261217e8d2c..0a1f0aa92ebc 100644 --- a/arch/mn10300/mm/cache.c +++ b/arch/mn10300/mm/cache.c @@ -18,8 +18,13 @@ #include #include #include +#include +#include "cache-smp.h" EXPORT_SYMBOL(mn10300_icache_inv); +EXPORT_SYMBOL(mn10300_icache_inv_range); +EXPORT_SYMBOL(mn10300_icache_inv_range2); +EXPORT_SYMBOL(mn10300_icache_inv_page); EXPORT_SYMBOL(mn10300_dcache_inv); EXPORT_SYMBOL(mn10300_dcache_inv_range); EXPORT_SYMBOL(mn10300_dcache_inv_range2); @@ -36,96 +41,6 @@ EXPORT_SYMBOL(mn10300_dcache_flush_range2); EXPORT_SYMBOL(mn10300_dcache_flush_page); #endif -/* - * write a page back from the dcache and invalidate the icache so that we can - * run code from it that we've just written into it - */ -void flush_icache_page(struct vm_area_struct *vma, struct page *page) -{ - mn10300_dcache_flush_page(page_to_phys(page)); - mn10300_icache_inv(); -} -EXPORT_SYMBOL(flush_icache_page); - -/* - * write some code we've just written back from the dcache and invalidate the - * icache so that we can run that code - */ -void flush_icache_range(unsigned long start, unsigned long end) -{ -#ifdef CONFIG_MN10300_CACHE_WBACK - unsigned long addr, size, base, off; - struct page *page; - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *ppte, pte; - - if (end > 0x80000000UL) { - /* addresses above 0xa0000000 do not go through the cache */ - if (end > 0xa0000000UL) { - end = 0xa0000000UL; - if (start >= end) - return; - } - - /* kernel addresses between 0x80000000 and 0x9fffffff do not - * require page tables, so we just map such addresses directly */ - base = (start >= 0x80000000UL) ? start : 0x80000000UL; - mn10300_dcache_flush_range(base, end); - if (base == start) - goto invalidate; - end = base; - } - - for (; start < end; start += size) { - /* work out how much of the page to flush */ - off = start & (PAGE_SIZE - 1); - - size = end - start; - if (size > PAGE_SIZE - off) - size = PAGE_SIZE - off; - - /* get the physical address the page is mapped to from the page - * tables */ - pgd = pgd_offset(current->mm, start); - if (!pgd || !pgd_val(*pgd)) - continue; - - pud = pud_offset(pgd, start); - if (!pud || !pud_val(*pud)) - continue; - - pmd = pmd_offset(pud, start); - if (!pmd || !pmd_val(*pmd)) - continue; - - ppte = pte_offset_map(pmd, start); - if (!ppte) - continue; - pte = *ppte; - pte_unmap(ppte); - - if (pte_none(pte)) - continue; - - page = pte_page(pte); - if (!page) - continue; - - addr = page_to_phys(page); - - /* flush the dcache and invalidate the icache coverage on that - * region */ - mn10300_dcache_flush_range2(addr + off, size); - } -#endif - -invalidate: - mn10300_icache_inv(); -} -EXPORT_SYMBOL(flush_icache_range); - /* * allow userspace to flush the instruction cache */ diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c index 81f153fa51b4..59c3da49d9d9 100644 --- a/arch/mn10300/mm/fault.c +++ b/arch/mn10300/mm/fault.c @@ -39,10 +39,6 @@ void bust_spinlocks(int yes) { if (yes) { oops_in_progress = 1; -#ifdef CONFIG_SMP - /* Many serial drivers do __global_cli() */ - global_irq_lock = 0; -#endif } else { int loglevel_save = console_loglevel; #ifdef CONFIG_VT @@ -100,8 +96,6 @@ static void print_pagetable_entries(pgd_t *pgdir, unsigned long address) } #endif -asmlinkage void monitor_signal(struct pt_regs *); - /* * This routine handles page faults. It determines the address, * and the problem, and then passes it off to one of the appropriate @@ -279,7 +273,6 @@ good_area: */ bad_area: up_read(&mm->mmap_sem); - monitor_signal(regs); /* User mode accesses just cause a SIGSEGV */ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) { @@ -292,7 +285,6 @@ bad_area: } no_context: - monitor_signal(regs); /* Are we prepared to handle this kernel fault? */ if (fixup_exception(regs)) return; @@ -338,14 +330,13 @@ no_context: */ out_of_memory: up_read(&mm->mmap_sem); - if ((fault_code & MMUFCR_xFC_ACCESS) != MMUFCR_xFC_ACCESS_USR) - goto no_context; - pagefault_out_of_memory(); - return; + printk(KERN_ALERT "VM: killing process %s\n", tsk->comm); + if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) + do_exit(SIGKILL); + goto no_context; do_sigbus: up_read(&mm->mmap_sem); - monitor_signal(regs); /* * Send a sigbus, regardless of whether we were in kernel diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c index 6e6bc0e51521..48907cc3bdb7 100644 --- a/arch/mn10300/mm/init.c +++ b/arch/mn10300/mm/init.c @@ -41,6 +41,10 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); unsigned long highstart_pfn, highend_pfn; +#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT +static struct vm_struct user_iomap_vm; +#endif + /* * set up paging */ @@ -73,7 +77,24 @@ void __init paging_init(void) /* pass the memory from the bootmem allocator to the main allocator */ free_area_init(zones_size); - __flush_tlb_all(); +#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + /* The Atomic Operation Unit registers need to be mapped to userspace + * for all processes. The following uses vm_area_register_early() to + * reserve the first page of the vmalloc area and sets the pte for that + * page. + * + * glibc hardcodes this virtual mapping, so we're pretty much stuck with + * it from now on. + */ + user_iomap_vm.flags = VM_USERMAP; + user_iomap_vm.size = 1 << PAGE_SHIFT; + vm_area_register_early(&user_iomap_vm, PAGE_SIZE); + ppte = kernel_vmalloc_ptes; + set_pte(ppte, pfn_pte(USER_ATOMIC_OPS_PAGE_ADDR >> PAGE_SHIFT, + PAGE_USERIO)); +#endif + + local_flush_tlb_all(); } /* @@ -84,8 +105,7 @@ void __init mem_init(void) int codesize, reservedpages, datasize, initsize; int tmp; - if (!mem_map) - BUG(); + BUG_ON(!mem_map); #define START_PFN (contig_page_data.bdata->node_min_pfn) #define MAX_LOW_PFN (contig_page_data.bdata->node_low_pfn) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 6dffbf97ac26..eef989c1d0c1 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -449,8 +449,7 @@ found_opcode: regs->pc, opcode, pop->opcode, pop->params[0], pop->params[1]); tmp = format_tbl[pop->format].opsz; - if (tmp > noc) - BUG(); /* match was less complete than it ought to have been */ + BUG_ON(tmp > noc); /* match was less complete than it ought to have been */ if (tmp < noc) { tmp = noc - tmp; diff --git a/arch/mn10300/mm/mmu-context.c b/arch/mn10300/mm/mmu-context.c index 36ba02191d40..a4f7d3dcc6e6 100644 --- a/arch/mn10300/mm/mmu-context.c +++ b/arch/mn10300/mm/mmu-context.c @@ -13,40 +13,15 @@ #include #include +#ifdef CONFIG_MN10300_TLB_USE_PIDR /* * list of the MMU contexts last allocated on each CPU */ unsigned long mmu_context_cache[NR_CPUS] = { - [0 ... NR_CPUS - 1] = MMU_CONTEXT_FIRST_VERSION * 2 - 1, + [0 ... NR_CPUS - 1] = + MMU_CONTEXT_FIRST_VERSION * 2 - (1 - MMU_CONTEXT_TLBPID_LOCK_NR), }; - -/* - * flush the specified TLB entry - */ -void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) -{ - unsigned long pteu, cnx, flags; - - addr &= PAGE_MASK; - - /* make sure the context doesn't migrate and defend against - * interference from vmalloc'd regions */ - local_irq_save(flags); - - cnx = mm_context(vma->vm_mm); - - if (cnx != MMU_NO_CONTEXT) { - pteu = addr | (cnx & 0x000000ffUL); - IPTEU = pteu; - DPTEU = pteu; - if (IPTEL & xPTEL_V) - IPTEL = 0; - if (DPTEL & xPTEL_V) - DPTEL = 0; - } - - local_irq_restore(flags); -} +#endif /* CONFIG_MN10300_TLB_USE_PIDR */ /* * preemptively set a TLB entry @@ -63,10 +38,16 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t *pte * interference from vmalloc'd regions */ local_irq_save(flags); + cnx = ~MMU_NO_CONTEXT; +#ifdef CONFIG_MN10300_TLB_USE_PIDR cnx = mm_context(vma->vm_mm); +#endif if (cnx != MMU_NO_CONTEXT) { - pteu = addr | (cnx & 0x000000ffUL); + pteu = addr; +#ifdef CONFIG_MN10300_TLB_USE_PIDR + pteu |= cnx & MMU_CONTEXT_TLBPID_MASK; +#endif if (!(pte_val(pte) & _PAGE_NX)) { IPTEU = pteu; if (IPTEL & xPTEL_V) diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c index 9c1624c9e4e9..450f7ba3f8f2 100644 --- a/arch/mn10300/mm/pgtable.c +++ b/arch/mn10300/mm/pgtable.c @@ -59,7 +59,7 @@ void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags) * It's enough to flush this one mapping. * (PGE mappings get flushed as well) */ - __flush_tlb_one(vaddr); + local_flush_tlb_one(vaddr); } pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) diff --git a/arch/mn10300/mm/tlb-mn10300.S b/arch/mn10300/mm/tlb-mn10300.S index 7095147dcb8b..b9940177d81b 100644 --- a/arch/mn10300/mm/tlb-mn10300.S +++ b/arch/mn10300/mm/tlb-mn10300.S @@ -27,7 +27,6 @@ ############################################################################### .type itlb_miss,@function ENTRY(itlb_miss) - and ~EPSW_NMID,epsw #ifdef CONFIG_GDBSTUB movm [d2,d3,a2],(sp) #else @@ -38,6 +37,12 @@ ENTRY(itlb_miss) nop #endif +#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) + mov (MMUCTR),d2 + mov d2,(MMUCTR) +#endif + + and ~EPSW_NMID,epsw mov (IPTEU),d3 mov (PTBR),a2 mov d3,d2 @@ -56,10 +61,16 @@ ENTRY(itlb_miss) btst _PAGE_VALID,d2 beq itlb_miss_fault # jump if doesn't point to a page # (might be a swap id) +#if ((_PAGE_ACCESSED & 0xffffff00) == 0) bset _PAGE_ACCESSED,(0,a2) - and ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2 +#elif ((_PAGE_ACCESSED & 0xffff00ff) == 0) + bset +(_PAGE_ACCESSED >> 8),(1,a2) +#else +#error "_PAGE_ACCESSED value is out of range" +#endif + and ~xPTEL2_UNUSED1,d2 itlb_miss_set: - mov d2,(IPTEL) # change the TLB + mov d2,(IPTEL2) # change the TLB #ifdef CONFIG_GDBSTUB movm (sp),[d2,d3,a2] #endif @@ -79,7 +90,6 @@ itlb_miss_fault: ############################################################################### .type dtlb_miss,@function ENTRY(dtlb_miss) - and ~EPSW_NMID,epsw #ifdef CONFIG_GDBSTUB movm [d2,d3,a2],(sp) #else @@ -90,6 +100,12 @@ ENTRY(dtlb_miss) nop #endif +#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) + mov (MMUCTR),d2 + mov d2,(MMUCTR) +#endif + + and ~EPSW_NMID,epsw mov (DPTEU),d3 mov (PTBR),a2 mov d3,d2 @@ -108,10 +124,16 @@ ENTRY(dtlb_miss) btst _PAGE_VALID,d2 beq dtlb_miss_fault # jump if doesn't point to a page # (might be a swap id) +#if ((_PAGE_ACCESSED & 0xffffff00) == 0) bset _PAGE_ACCESSED,(0,a2) - and ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2 +#elif ((_PAGE_ACCESSED & 0xffff00ff) == 0) + bset +(_PAGE_ACCESSED >> 8),(1,a2) +#else +#error "_PAGE_ACCESSED value is out of range" +#endif + and ~xPTEL2_UNUSED1,d2 dtlb_miss_set: - mov d2,(DPTEL) # change the TLB + mov d2,(DPTEL2) # change the TLB #ifdef CONFIG_GDBSTUB movm (sp),[d2,d3,a2] #endif @@ -130,9 +152,15 @@ dtlb_miss_fault: ############################################################################### .type itlb_aerror,@function ENTRY(itlb_aerror) - and ~EPSW_NMID,epsw add -4,sp SAVE_ALL + +#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) + mov (MMUCTR),d1 + mov d1,(MMUCTR) +#endif + + and ~EPSW_NMID,epsw add -4,sp # need to pass three params # calculate the fault code @@ -140,15 +168,13 @@ ENTRY(itlb_aerror) or 0x00010000,d1 # it's an instruction fetch # determine the page address - mov (IPTEU),a2 - mov a2,d0 + mov (IPTEU),d0 and PAGE_MASK,d0 mov d0,(12,sp) clr d0 - mov d0,(IPTEL) + mov d0,(IPTEL2) - and ~EPSW_NMID,epsw or EPSW_IE,epsw mov fp,d0 call do_page_fault[],0 # do_page_fault(regs,code,addr @@ -163,10 +189,16 @@ ENTRY(itlb_aerror) ############################################################################### .type dtlb_aerror,@function ENTRY(dtlb_aerror) - and ~EPSW_NMID,epsw add -4,sp SAVE_ALL + +#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) + mov (MMUCTR),d1 + mov d1,(MMUCTR) +#endif + add -4,sp # need to pass three params + and ~EPSW_NMID,epsw # calculate the fault code movhu (MMUFCR_DFC),d1 @@ -178,9 +210,8 @@ ENTRY(dtlb_aerror) mov d0,(12,sp) clr d0 - mov d0,(DPTEL) + mov d0,(DPTEL2) - and ~EPSW_NMID,epsw or EPSW_IE,epsw mov fp,d0 call do_page_fault[],0 # do_page_fault(regs,code,addr diff --git a/arch/mn10300/mm/tlb-smp.c b/arch/mn10300/mm/tlb-smp.c new file mode 100644 index 000000000000..0b6a5ad1960e --- /dev/null +++ b/arch/mn10300/mm/tlb-smp.c @@ -0,0 +1,214 @@ +/* SMP TLB support routines. + * + * Copyright (C) 2006-2008 Panasonic Corporation + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * For flush TLB + */ +#define FLUSH_ALL 0xffffffff + +static cpumask_t flush_cpumask; +static struct mm_struct *flush_mm; +static unsigned long flush_va; +static DEFINE_SPINLOCK(tlbstate_lock); + +DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = { + &init_mm, 0 +}; + +static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, + unsigned long va); +static void do_flush_tlb_all(void *info); + +/** + * smp_flush_tlb - Callback to invalidate the TLB. + * @unused: Callback context (ignored). + */ +void smp_flush_tlb(void *unused) +{ + unsigned long cpu_id; + + cpu_id = get_cpu(); + + if (!cpu_isset(cpu_id, flush_cpumask)) + /* This was a BUG() but until someone can quote me the line + * from the intel manual that guarantees an IPI to multiple + * CPUs is retried _only_ on the erroring CPUs its staying as a + * return + * + * BUG(); + */ + goto out; + + if (flush_va == FLUSH_ALL) + local_flush_tlb(); + else + local_flush_tlb_page(flush_mm, flush_va); + + smp_mb__before_clear_bit(); + cpu_clear(cpu_id, flush_cpumask); + smp_mb__after_clear_bit(); +out: + put_cpu(); +} + +/** + * flush_tlb_others - Tell the specified CPUs to invalidate their TLBs + * @cpumask: The list of CPUs to target. + * @mm: The VM context to flush from (if va!=FLUSH_ALL). + * @va: Virtual address to flush or FLUSH_ALL to flush everything. + */ +static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, + unsigned long va) +{ + cpumask_t tmp; + + /* A couple of sanity checks (to be removed): + * - mask must not be empty + * - current CPU must not be in mask + * - we do not send IPIs to as-yet unbooted CPUs. + */ + BUG_ON(!mm); + BUG_ON(cpus_empty(cpumask)); + BUG_ON(cpu_isset(smp_processor_id(), cpumask)); + + cpus_and(tmp, cpumask, cpu_online_map); + BUG_ON(!cpus_equal(cpumask, tmp)); + + /* I'm not happy about this global shared spinlock in the MM hot path, + * but we'll see how contended it is. + * + * Temporarily this turns IRQs off, so that lockups are detected by the + * NMI watchdog. + */ + spin_lock(&tlbstate_lock); + + flush_mm = mm; + flush_va = va; +#if NR_CPUS <= BITS_PER_LONG + atomic_set_mask(cpumask.bits[0], &flush_cpumask.bits[0]); +#else +#error Not supported. +#endif + + /* FIXME: if NR_CPUS>=3, change send_IPI_mask */ + smp_call_function(smp_flush_tlb, NULL, 1); + + while (!cpus_empty(flush_cpumask)) + /* Lockup detection does not belong here */ + smp_mb(); + + flush_mm = NULL; + flush_va = 0; + spin_unlock(&tlbstate_lock); +} + +/** + * flush_tlb_mm - Invalidate TLB of specified VM context + * @mm: The VM context to invalidate. + */ +void flush_tlb_mm(struct mm_struct *mm) +{ + cpumask_t cpu_mask; + + preempt_disable(); + cpu_mask = mm->cpu_vm_mask; + cpu_clear(smp_processor_id(), cpu_mask); + + local_flush_tlb(); + if (!cpus_empty(cpu_mask)) + flush_tlb_others(cpu_mask, mm, FLUSH_ALL); + + preempt_enable(); +} + +/** + * flush_tlb_current_task - Invalidate TLB of current task + */ +void flush_tlb_current_task(void) +{ + struct mm_struct *mm = current->mm; + cpumask_t cpu_mask; + + preempt_disable(); + cpu_mask = mm->cpu_vm_mask; + cpu_clear(smp_processor_id(), cpu_mask); + + local_flush_tlb(); + if (!cpus_empty(cpu_mask)) + flush_tlb_others(cpu_mask, mm, FLUSH_ALL); + + preempt_enable(); +} + +/** + * flush_tlb_page - Invalidate TLB of page + * @vma: The VM context to invalidate the page for. + * @va: The virtual address of the page to invalidate. + */ +void flush_tlb_page(struct vm_area_struct *vma, unsigned long va) +{ + struct mm_struct *mm = vma->vm_mm; + cpumask_t cpu_mask; + + preempt_disable(); + cpu_mask = mm->cpu_vm_mask; + cpu_clear(smp_processor_id(), cpu_mask); + + local_flush_tlb_page(mm, va); + if (!cpus_empty(cpu_mask)) + flush_tlb_others(cpu_mask, mm, va); + + preempt_enable(); +} + +/** + * do_flush_tlb_all - Callback to completely invalidate a TLB + * @unused: Callback context (ignored). + */ +static void do_flush_tlb_all(void *unused) +{ + local_flush_tlb_all(); +} + +/** + * flush_tlb_all - Completely invalidate TLBs on all CPUs + */ +void flush_tlb_all(void) +{ + on_each_cpu(do_flush_tlb_all, 0, 1); +} diff --git a/arch/mn10300/proc-mn103e010/include/proc/cache.h b/arch/mn10300/proc-mn103e010/include/proc/cache.h index bdc1f9a59b4c..c1528004163c 100644 --- a/arch/mn10300/proc-mn103e010/include/proc/cache.h +++ b/arch/mn10300/proc-mn103e010/include/proc/cache.h @@ -30,4 +30,13 @@ */ #define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4 +/* + * The size of range at which it becomes more economical to just flush the + * whole cache rather than trying to flush the specified range. + */ +#define MN10300_DCACHE_FLUSH_BORDER \ + +(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES) +#define MN10300_DCACHE_FLUSH_INV_BORDER \ + +(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES) + #endif /* _ASM_PROC_CACHE_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/clock.h b/arch/mn10300/proc-mn103e010/include/proc/clock.h index aa23e147d620..704a819f1f4b 100644 --- a/arch/mn10300/proc-mn103e010/include/proc/clock.h +++ b/arch/mn10300/proc-mn103e010/include/proc/clock.h @@ -13,6 +13,4 @@ #include -#define MN10300_WDCLK MN10300_IOCLK - #endif /* _ASM_PROC_CLOCK_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/dmactl-regs.h b/arch/mn10300/proc-mn103e010/include/proc/dmactl-regs.h new file mode 100644 index 000000000000..d72d328d1f9c --- /dev/null +++ b/arch/mn10300/proc-mn103e010/include/proc/dmactl-regs.h @@ -0,0 +1,102 @@ +/* MN103E010 on-board DMA controller registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_PROC_DMACTL_REGS_H +#define _ASM_PROC_DMACTL_REGS_H + +#include + +#ifdef __KERNEL__ + +/* DMA registers */ +#define DMxCTR(N) __SYSREG(0xd2000000 + ((N) * 0x100), u32) /* control reg */ +#define DMxCTR_BG 0x0000001f /* transfer request source */ +#define DMxCTR_BG_SOFT 0x00000000 /* - software source */ +#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */ +#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */ +#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */ +#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */ +#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */ +#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */ +#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */ +#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */ +#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */ +#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */ +#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */ +#define DMxCTR_BG_AFE 0x0000000d /* - analogue front-end interrupt source */ +#define DMxCTR_BG_ADC 0x0000000e /* - A/D conversion end interrupt source */ +#define DMxCTR_BG_IRDA 0x0000000f /* - IrDA interrupt source */ +#define DMxCTR_BG_RTC 0x00000010 /* - RTC interrupt source */ +#define DMxCTR_BG_XIRQ0 0x00000011 /* - XIRQ0 pin interrupt source */ +#define DMxCTR_BG_XIRQ1 0x00000012 /* - XIRQ1 pin interrupt source */ +#define DMxCTR_BG_XDMR0 0x00000013 /* - external request 0 source (XDMR0 pin) */ +#define DMxCTR_BG_XDMR1 0x00000014 /* - external request 1 source (XDMR1 pin) */ +#define DMxCTR_SAM 0x000000e0 /* DMA transfer src addr mode */ +#define DMxCTR_SAM_INCR 0x00000000 /* - increment */ +#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */ +#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */ +#define DMxCTR_DAM 0x00000000 /* DMA transfer dest addr mode */ +#define DMxCTR_DAM_INCR 0x00000000 /* - increment */ +#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */ +#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */ +#define DMxCTR_TM 0x00001800 /* DMA transfer mode */ +#define DMxCTR_TM_BATCH 0x00000000 /* - batch transfer */ +#define DMxCTR_TM_INTERM 0x00001000 /* - intermittent transfer */ +#define DMxCTR_UT 0x00006000 /* DMA transfer unit */ +#define DMxCTR_UT_1 0x00000000 /* - 1 byte */ +#define DMxCTR_UT_2 0x00002000 /* - 2 byte */ +#define DMxCTR_UT_4 0x00004000 /* - 4 byte */ +#define DMxCTR_UT_16 0x00006000 /* - 16 byte */ +#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */ +#define DMxCTR_RQM 0x00060000 /* external request input source mode */ +#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */ +#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */ +#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */ +#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */ +#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */ +#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */ + +#define DMxSRC(N) __SYSREG(0xd2000004 + ((N) * 0x100), u32) /* control reg */ + +#define DMxDST(N) __SYSREG(0xd2000008 + ((N) * 0x100), u32) /* src addr reg */ + +#define DMxSIZ(N) __SYSREG(0xd200000c + ((N) * 0x100), u32) /* dest addr reg */ +#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */ + +#define DMxCYC(N) __SYSREG(0xd2000010 + ((N) * 0x100), u32) /* intermittent + * size reg */ +#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */ + +#define DM0IRQ 16 /* DMA channel 0 complete IRQ */ +#define DM1IRQ 17 /* DMA channel 1 complete IRQ */ +#define DM2IRQ 18 /* DMA channel 2 complete IRQ */ +#define DM3IRQ 19 /* DMA channel 3 complete IRQ */ + +#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */ +#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */ +#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */ +#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */ + +#ifndef __ASSEMBLY__ + +struct mn10300_dmactl_regs { + u32 ctr; + const void *src; + void *dst; + u32 siz; + u32 cyc; +} __attribute__((aligned(0x100))); + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_PROC_DMACTL_REGS_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/intctl-regs.h b/arch/mn10300/proc-mn103e010/include/proc/intctl-regs.h new file mode 100644 index 000000000000..f537801a44ba --- /dev/null +++ b/arch/mn10300/proc-mn103e010/include/proc/intctl-regs.h @@ -0,0 +1,29 @@ +#ifndef _ASM_PROC_INTCTL_REGS_H +#define _ASM_PROC_INTCTL_REGS_H + +#ifndef _ASM_INTCTL_REGS_H +# error "please don't include this file directly" +#endif + +/* intr acceptance group reg */ +#define IAGR __SYSREG(0xd4000100, u16) + +/* group number register */ +#define IAGR_GN 0x00fc + +#define __GET_XIRQ_TRIGGER(X, Z) (((Z) >> ((X) * 2)) & 3) + +#define __SET_XIRQ_TRIGGER(X, Y, Z) \ +({ \ + typeof(Z) x = (Z); \ + x &= ~(3 << ((X) * 2)); \ + x |= ((Y) & 3) << ((X) * 2); \ + (Z) = x; \ +}) + +/* external pin intr spec reg */ +#define EXTMD __SYSREG(0xd4000200, u16) +#define GET_XIRQ_TRIGGER(X) __GET_XIRQ_TRIGGER(X, EXTMD) +#define SET_XIRQ_TRIGGER(X, Y) __SET_XIRQ_TRIGGER(X, Y, EXTMD) + +#endif /* _ASM_PROC_INTCTL_REGS_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/proc.h b/arch/mn10300/proc-mn103e010/include/proc/proc.h index 22a2b93f70b7..39c4f8e7d2d3 100644 --- a/arch/mn10300/proc-mn103e010/include/proc/proc.h +++ b/arch/mn10300/proc-mn103e010/include/proc/proc.h @@ -12,7 +12,7 @@ #ifndef _ASM_PROC_PROC_H #define _ASM_PROC_PROC_H -#define PROCESSOR_VENDOR_NAME "Matsushita" +#define PROCESSOR_VENDOR_NAME "Panasonic" #define PROCESSOR_MODEL_NAME "mn103e010" #endif /* _ASM_PROC_PROC_H */ diff --git a/arch/mn10300/proc-mn103e010/proc-init.c b/arch/mn10300/proc-mn103e010/proc-init.c index 9a482efafa82..27b97980dca4 100644 --- a/arch/mn10300/proc-mn103e010/proc-init.c +++ b/arch/mn10300/proc-mn103e010/proc-init.c @@ -9,7 +9,9 @@ * 2 of the Licence, or (at your option) any later version. */ #include +#include #include +#include /* * initialise the on-silicon processor peripherals @@ -28,6 +30,7 @@ asmlinkage void __init processor_init(void) __set_intr_stub(EXCEP_DAERROR, dtlb_aerror); __set_intr_stub(EXCEP_BUSERROR, raw_bus_error); __set_intr_stub(EXCEP_DOUBLE_FAULT, double_fault); + __set_intr_stub(EXCEP_FPU_DISABLED, fpu_disabled); __set_intr_stub(EXCEP_SYSCALL0, system_call); __set_intr_stub(EXCEP_NMI, nmi_handler); @@ -73,3 +76,37 @@ asmlinkage void __init processor_init(void) calibrate_clock(); } + +/* + * determine the memory size and base from the memory controller regs + */ +void __init get_mem_info(unsigned long *mem_base, unsigned long *mem_size) +{ + unsigned long base, size; + + *mem_base = 0; + *mem_size = 0; + + base = SDBASE(0); + if (base & SDBASE_CE) { + size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT; + size = ~size + 1; + base &= SDBASE_CBA; + + printk(KERN_INFO "SDRAM[0]: %luMb @%08lx\n", size >> 20, base); + *mem_size += size; + *mem_base = base; + } + + base = SDBASE(1); + if (base & SDBASE_CE) { + size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT; + size = ~size + 1; + base &= SDBASE_CBA; + + printk(KERN_INFO "SDRAM[1]: %luMb @%08lx\n", size >> 20, base); + *mem_size += size; + if (*mem_base == 0) + *mem_base = base; + } +} diff --git a/arch/mn10300/proc-mn2ws0050/Makefile b/arch/mn10300/proc-mn2ws0050/Makefile new file mode 100644 index 000000000000..d4ca13309a85 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the linux kernel. +# + +obj-y := proc-init.o diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/cache.h b/arch/mn10300/proc-mn2ws0050/include/proc/cache.h new file mode 100644 index 000000000000..cafd7b5b55b4 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/cache.h @@ -0,0 +1,48 @@ +/* Cache specification + * + * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 13-Nov-2006 MEI Add L1_CACHE_SHIFT_MAX definition. + * 29-Jul-2008 MEI Add define for MN10300_HAS_AREAPURGE_REG. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_PROC_CACHE_H +#define _ASM_PROC_CACHE_H + +/* + * L1 cache + */ +#define L1_CACHE_NWAYS 4 /* number of ways in caches */ +#define L1_CACHE_NENTRIES 128 /* number of entries in each way */ +#define L1_CACHE_BYTES 32 /* bytes per entry */ +#define L1_CACHE_SHIFT 5 /* shift for bytes per entry */ +#define L1_CACHE_WAYDISP 0x1000 /* distance from one way to the next */ + +#define L1_CACHE_TAG_VALID 0x00000001 /* cache tag valid bit */ +#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */ +#define L1_CACHE_TAG_ENTRY 0x00000fe0 /* cache tag entry address mask */ +#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */ + +/* + * specification of the interval between interrupt checking intervals whilst + * managing the cache with the interrupts disabled + */ +#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4 + +/* + * The size of range at which it becomes more economical to just flush the + * whole cache rather than trying to flush the specified range. + */ +#define MN10300_DCACHE_FLUSH_BORDER \ + +(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES) +#define MN10300_DCACHE_FLUSH_INV_BORDER \ + +(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES) + +#endif /* _ASM_PROC_CACHE_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/clock.h b/arch/mn10300/proc-mn2ws0050/include/proc/clock.h new file mode 100644 index 000000000000..fe4c0a4a53a2 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/clock.h @@ -0,0 +1,20 @@ +/* clock.h: proc-specific clocks + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 23-Feb-2007 MEI Delete define for watchdog timer. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_PROC_CLOCK_H +#define _ASM_PROC_CLOCK_H + +#include + +#endif /* _ASM_PROC_CLOCK_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h new file mode 100644 index 000000000000..4c4319e241d1 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h @@ -0,0 +1,103 @@ +/* MN2WS0050 on-board DMA controller registers + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#ifndef _ASM_PROC_DMACTL_REGS_H +#define _ASM_PROC_DMACTL_REGS_H + +#include + +#ifdef __KERNEL__ + +/* DMA registers */ +#define DMxCTR(N) __SYSREG(0xd4005000+(N*0x100), u32) /* control reg */ +#define DMxCTR_BG 0x0000001f /* transfer request source */ +#define DMxCTR_BG_SOFT 0x00000000 /* - software source */ +#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */ +#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */ +#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */ +#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */ +#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */ +#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */ +#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */ +#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */ +#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */ +#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */ +#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */ +#define DMxCTR_BG_RYBY 0x0000000d /* - NAND Flash RY/BY request source */ +#define DMxCTR_BG_RMC 0x0000000e /* - remote controller output */ +#define DMxCTR_BG_XIRQ12 0x00000011 /* - XIRQ12 pin interrupt source */ +#define DMxCTR_BG_XIRQ13 0x00000012 /* - XIRQ13 pin interrupt source */ +#define DMxCTR_BG_TCK 0x00000014 /* - tick timer underflow */ +#define DMxCTR_BG_SC4TX 0x00000019 /* - serial port4 transmission */ +#define DMxCTR_BG_SC4RX 0x0000001a /* - serial port4 reception */ +#define DMxCTR_BG_SC5TX 0x0000001b /* - serial port5 transmission */ +#define DMxCTR_BG_SC5RX 0x0000001c /* - serial port5 reception */ +#define DMxCTR_BG_SC6TX 0x0000001d /* - serial port6 transmission */ +#define DMxCTR_BG_SC6RX 0x0000001e /* - serial port6 reception */ +#define DMxCTR_BG_TMSUFLOW 0x0000001f /* - timestamp timer underflow */ +#define DMxCTR_SAM 0x00000060 /* DMA transfer src addr mode */ +#define DMxCTR_SAM_INCR 0x00000000 /* - increment */ +#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */ +#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */ +#define DMxCTR_DAM 0x00000300 /* DMA transfer dest addr mode */ +#define DMxCTR_DAM_INCR 0x00000000 /* - increment */ +#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */ +#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */ +#define DMxCTR_UT 0x00006000 /* DMA transfer unit */ +#define DMxCTR_UT_1 0x00000000 /* - 1 byte */ +#define DMxCTR_UT_2 0x00002000 /* - 2 byte */ +#define DMxCTR_UT_4 0x00004000 /* - 4 byte */ +#define DMxCTR_UT_16 0x00006000 /* - 16 byte */ +#define DMxCTR_RRE 0x00008000 /* DMA round robin enable */ +#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */ +#define DMxCTR_RQM 0x00060000 /* external request input source mode */ +#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */ +#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */ +#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */ +#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */ +#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */ +#define DMxCTR_PERR 0x40000000 /* DMA transfer parameter error flag */ +#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */ + +#define DMxSRC(N) __SYSREG(0xd4005004+(N*0x100), u32) /* control reg */ + +#define DMxDST(N) __SYSREG(0xd4005008+(N*0x100), u32) /* source addr reg */ + +#define DMxSIZ(N) __SYSREG(0xd400500c+(N*0x100), u32) /* dest addr reg */ +#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */ + +#define DMxCYC(N) __SYSREG(0xd4005010+(N*0x100), u32) /* intermittent size reg */ +#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */ + +#define DM0IRQ 16 /* DMA channel 0 complete IRQ */ +#define DM1IRQ 17 /* DMA channel 1 complete IRQ */ +#define DM2IRQ 18 /* DMA channel 2 complete IRQ */ +#define DM3IRQ 19 /* DMA channel 3 complete IRQ */ + +#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */ +#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */ +#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */ +#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */ + +#ifndef __ASSEMBLY__ + +struct mn10300_dmactl_regs { + u32 ctr; + const void *src; + void *dst; + u32 siz; + u32 cyc; +} __attribute__((aligned(0x100))); + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_PROC_DMACTL_REGS_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/intctl-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/intctl-regs.h new file mode 100644 index 000000000000..a1e977273d19 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/intctl-regs.h @@ -0,0 +1,29 @@ +#ifndef _ASM_PROC_INTCTL_REGS_H +#define _ASM_PROC_INTCTL_REGS_H + +#ifndef _ASM_INTCTL_REGS_H +# error "please don't include this file directly" +#endif + +/* intr acceptance group reg */ +#define IAGR __SYSREG(0xd4000100, u16) + +/* group number register */ +#define IAGR_GN 0x003fc + +#define __GET_XIRQ_TRIGGER(X, Z) (((Z) >> ((X) * 2)) & 3) + +#define __SET_XIRQ_TRIGGER(X, Y, Z) \ +({ \ + typeof(Z) x = (Z); \ + x &= ~(3 << ((X) * 2)); \ + x |= ((Y) & 3) << ((X) * 2); \ + (Z) = x; \ +}) + +/* external pin intr spec reg */ +#define EXTMD0 __SYSREG(0xd4000200, u32) +#define GET_XIRQ_TRIGGER(X) __GET_XIRQ_TRIGGER(X, EXTMD0) +#define SET_XIRQ_TRIGGER(X, Y) __SET_XIRQ_TRIGGER(X, Y, EXTMD0) + +#endif /* _ASM_PROC_INTCTL_REGS_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/irq.h b/arch/mn10300/proc-mn2ws0050/include/proc/irq.h new file mode 100644 index 000000000000..37777a85ab6f --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/irq.h @@ -0,0 +1,49 @@ +/* MN2WS0050 on-board interrupt controller registers + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 13-Nov-2006 MEI Define extended IRQ number for SMP support. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _PROC_IRQ_H +#define _PROC_IRQ_H + +#ifdef __KERNEL__ + +#define GxICR_NUM_IRQS 163 +#ifdef CONFIG_SMP +#define GxICR_NUM_EXT_IRQS 197 +#endif /* CONFIG_SMP */ + +#define GxICR_NUM_XIRQS 16 + +#define XIRQ0 34 +#define XIRQ1 35 +#define XIRQ2 36 +#define XIRQ3 37 +#define XIRQ4 38 +#define XIRQ5 39 +#define XIRQ6 40 +#define XIRQ7 41 +#define XIRQ8 42 +#define XIRQ9 43 +#define XIRQ10 44 +#define XIRQ11 45 +#define XIRQ12 46 +#define XIRQ13 47 +#define XIRQ14 48 +#define XIRQ15 49 + +#define XIRQ2IRQ(num) (XIRQ0 + num) + +#endif /* __KERNEL__ */ + +#endif /* _PROC_IRQ_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/nand-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/nand-regs.h new file mode 100644 index 000000000000..84448f3828b3 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/nand-regs.h @@ -0,0 +1,120 @@ +/* NAND flash interface register definitions + * + * Copyright (C) 2008-2009 Panasonic Corporation + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _PROC_NAND_REGS_H_ +#define _PROC_NAND_REGS_H_ + +/* command register */ +#define FCOMMAND_0 __SYSREG(0xd8f00000, u8) /* fcommand[24:31] */ +#define FCOMMAND_1 __SYSREG(0xd8f00001, u8) /* fcommand[16:23] */ +#define FCOMMAND_2 __SYSREG(0xd8f00002, u8) /* fcommand[8:15] */ +#define FCOMMAND_3 __SYSREG(0xd8f00003, u8) /* fcommand[0:7] */ + +/* for dma 16 byte trans, use FCOMMAND2 register */ +#define FCOMMAND2_0 __SYSREG(0xd8f00110, u8) /* fcommand2[24:31] */ +#define FCOMMAND2_1 __SYSREG(0xd8f00111, u8) /* fcommand2[16:23] */ +#define FCOMMAND2_2 __SYSREG(0xd8f00112, u8) /* fcommand2[8:15] */ +#define FCOMMAND2_3 __SYSREG(0xd8f00113, u8) /* fcommand2[0:7] */ + +#define FCOMMAND_FIEN 0x80 /* nand flash I/F enable */ +#define FCOMMAND_BW_8BIT 0x00 /* 8bit bus width */ +#define FCOMMAND_BW_16BIT 0x40 /* 16bit bus width */ +#define FCOMMAND_BLOCKSZ_SMALL 0x00 /* small block */ +#define FCOMMAND_BLOCKSZ_LARGE 0x20 /* large block */ +#define FCOMMAND_DMASTART 0x10 /* dma start */ +#define FCOMMAND_RYBY 0x08 /* ready/busy flag */ +#define FCOMMAND_RYBYINTMSK 0x04 /* mask ready/busy interrupt */ +#define FCOMMAND_XFWP 0x02 /* write protect enable */ +#define FCOMMAND_XFCE 0x01 /* flash device disable */ +#define FCOMMAND_SEQKILL 0x10 /* stop seq-read */ +#define FCOMMAND_ANUM 0x07 /* address cycle */ +#define FCOMMAND_ANUM_NONE 0x00 /* address cycle none */ +#define FCOMMAND_ANUM_1CYC 0x01 /* address cycle 1cycle */ +#define FCOMMAND_ANUM_2CYC 0x02 /* address cycle 2cycle */ +#define FCOMMAND_ANUM_3CYC 0x03 /* address cycle 3cycle */ +#define FCOMMAND_ANUM_4CYC 0x04 /* address cycle 4cycle */ +#define FCOMMAND_ANUM_5CYC 0x05 /* address cycle 5cycle */ +#define FCOMMAND_FCMD_READ0 0x00 /* read1 command */ +#define FCOMMAND_FCMD_SEQIN 0x80 /* page program 1st command */ +#define FCOMMAND_FCMD_PAGEPROG 0x10 /* page program 2nd command */ +#define FCOMMAND_FCMD_RESET 0xff /* reset command */ +#define FCOMMAND_FCMD_ERASE1 0x60 /* erase 1st command */ +#define FCOMMAND_FCMD_ERASE2 0xd0 /* erase 2nd command */ +#define FCOMMAND_FCMD_STATUS 0x70 /* read status command */ +#define FCOMMAND_FCMD_READID 0x90 /* read id command */ +#define FCOMMAND_FCMD_READOOB 0x50 /* read3 command */ +/* address register */ +#define FADD __SYSREG(0xd8f00004, u32) +/* address register 2 */ +#define FADD2 __SYSREG(0xd8f00008, u32) +/* error judgement register */ +#define FJUDGE __SYSREG(0xd8f0000c, u32) +#define FJUDGE_NOERR 0x0 /* no error */ +#define FJUDGE_1BITERR 0x1 /* 1bit error in data area */ +#define FJUDGE_PARITYERR 0x2 /* parity error */ +#define FJUDGE_UNCORRECTABLE 0x3 /* uncorrectable error */ +#define FJUDGE_ERRJDG_MSK 0x3 /* mask of judgement result */ +/* 1st ECC store register */ +#define FECC11 __SYSREG(0xd8f00010, u32) +/* 2nd ECC store register */ +#define FECC12 __SYSREG(0xd8f00014, u32) +/* 3rd ECC store register */ +#define FECC21 __SYSREG(0xd8f00018, u32) +/* 4th ECC store register */ +#define FECC22 __SYSREG(0xd8f0001c, u32) +/* 5th ECC store register */ +#define FECC31 __SYSREG(0xd8f00020, u32) +/* 6th ECC store register */ +#define FECC32 __SYSREG(0xd8f00024, u32) +/* 7th ECC store register */ +#define FECC41 __SYSREG(0xd8f00028, u32) +/* 8th ECC store register */ +#define FECC42 __SYSREG(0xd8f0002c, u32) +/* data register */ +#define FDATA __SYSREG(0xd8f00030, u32) +/* access pulse register */ +#define FPWS __SYSREG(0xd8f00100, u32) +#define FPWS_PWS1W_2CLK 0x00000000 /* write pulse width 1clock */ +#define FPWS_PWS1W_3CLK 0x01000000 /* write pulse width 2clock */ +#define FPWS_PWS1W_4CLK 0x02000000 /* write pulse width 4clock */ +#define FPWS_PWS1W_5CLK 0x03000000 /* write pulse width 5clock */ +#define FPWS_PWS1W_6CLK 0x04000000 /* write pulse width 6clock */ +#define FPWS_PWS1W_7CLK 0x05000000 /* write pulse width 7clock */ +#define FPWS_PWS1W_8CLK 0x06000000 /* write pulse width 8clock */ +#define FPWS_PWS1R_3CLK 0x00010000 /* read pulse width 3clock */ +#define FPWS_PWS1R_4CLK 0x00020000 /* read pulse width 4clock */ +#define FPWS_PWS1R_5CLK 0x00030000 /* read pulse width 5clock */ +#define FPWS_PWS1R_6CLK 0x00040000 /* read pulse width 6clock */ +#define FPWS_PWS1R_7CLK 0x00050000 /* read pulse width 7clock */ +#define FPWS_PWS1R_8CLK 0x00060000 /* read pulse width 8clock */ +#define FPWS_PWS2W_2CLK 0x00000100 /* write pulse interval 2clock */ +#define FPWS_PWS2W_3CLK 0x00000200 /* write pulse interval 3clock */ +#define FPWS_PWS2W_4CLK 0x00000300 /* write pulse interval 4clock */ +#define FPWS_PWS2W_5CLK 0x00000400 /* write pulse interval 5clock */ +#define FPWS_PWS2W_6CLK 0x00000500 /* write pulse interval 6clock */ +#define FPWS_PWS2R_2CLK 0x00000001 /* read pulse interval 2clock */ +#define FPWS_PWS2R_3CLK 0x00000002 /* read pulse interval 3clock */ +#define FPWS_PWS2R_4CLK 0x00000003 /* read pulse interval 4clock */ +#define FPWS_PWS2R_5CLK 0x00000004 /* read pulse interval 5clock */ +#define FPWS_PWS2R_6CLK 0x00000005 /* read pulse interval 6clock */ +/* command register 2 */ +#define FCOMMAND2 __SYSREG(0xd8f00110, u32) +/* transfer frequency register */ +#define FNUM __SYSREG(0xd8f00114, u32) +#define FSDATA_ADDR 0xd8f00400 +/* active data register */ +#define FSDATA __SYSREG(FSDATA_ADDR, u32) + +#endif /* _PROC_NAND_REGS_H_ */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/proc.h b/arch/mn10300/proc-mn2ws0050/include/proc/proc.h new file mode 100644 index 000000000000..90d5cadd05bd --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/proc.h @@ -0,0 +1,18 @@ +/* proc.h: MN2WS0050 processor description + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_PROC_PROC_H +#define _ASM_PROC_PROC_H + +#define PROCESSOR_VENDOR_NAME "Panasonic" +#define PROCESSOR_MODEL_NAME "mn2ws0050" + +#endif /* _ASM_PROC_PROC_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/smp-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/smp-regs.h new file mode 100644 index 000000000000..22f277fbb4de --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/smp-regs.h @@ -0,0 +1,51 @@ +/* MN10300/AM33v2 Microcontroller SMP registers + * + * Copyright (C) 2006 Matsushita Electric Industrial Co., Ltd. + * All Rights Reserved. + * Created: + * 13-Nov-2006 MEI Add extended cache and atomic operation register + * for SMP support. + * 23-Feb-2007 MEI Add define for gdbstub SMP. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_PROC_SMP_REGS_H +#define _ASM_PROC_SMP_REGS_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +#include +#endif +#include + +/* + * Reference to the interrupt controllers of other CPUs + */ +#define CROSS_ICR_CPU_SHIFT 16 + +#define CROSS_GxICR(X, CPU) __SYSREG(0xc4000000 + (X) * 4 + \ + ((X) >= 64 && (X) < 192) * 0xf00 + ((CPU) << CROSS_ICR_CPU_SHIFT), u16) +#define CROSS_GxICR_u8(X, CPU) __SYSREG(0xc4000000 + (X) * 4 + \ + (((X) >= 64) && ((X) < 192)) * 0xf00 + ((CPU) << CROSS_ICR_CPU_SHIFT), u8) + +/* CPU ID register */ +#define CPUID __SYSREGC(0xc0000054, u32) +#define CPUID_MASK 0x00000007 /* CPU ID mask */ + +/* extended cache control register */ +#define ECHCTR __SYSREG(0xc0000c20, u32) +#define ECHCTR_IBCM 0x00000001 /* instruction cache broad cast mask */ +#define ECHCTR_DBCM 0x00000002 /* data cache broad cast mask */ +#define ECHCTR_ISPM 0x00000004 /* instruction cache snoop mask */ +#define ECHCTR_DSPM 0x00000008 /* data cache snoop mask */ + +#define NMIAGR __SYSREG(0xd400013c, u16) +#define NMIAGR_GN 0x03fc + +#endif /* __KERNEL__ */ +#endif /* _ASM_PROC_SMP_REGS_H */ diff --git a/arch/mn10300/proc-mn2ws0050/proc-init.c b/arch/mn10300/proc-mn2ws0050/proc-init.c new file mode 100644 index 000000000000..c58249b9525a --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/proc-init.c @@ -0,0 +1,134 @@ +/* MN2WS0050 processor initialisation + * + * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MEMCONF __SYSREGC(0xdf800400, u32) + +/* + * initialise the on-silicon processor peripherals + */ +asmlinkage void __init processor_init(void) +{ + int loop; + + /* set up the exception table first */ + for (loop = 0x000; loop < 0x400; loop += 8) + __set_intr_stub(loop, __common_exception); + + __set_intr_stub(EXCEP_ITLBMISS, itlb_miss); + __set_intr_stub(EXCEP_DTLBMISS, dtlb_miss); + __set_intr_stub(EXCEP_IAERROR, itlb_aerror); + __set_intr_stub(EXCEP_DAERROR, dtlb_aerror); + __set_intr_stub(EXCEP_BUSERROR, raw_bus_error); + __set_intr_stub(EXCEP_DOUBLE_FAULT, double_fault); + __set_intr_stub(EXCEP_FPU_DISABLED, fpu_disabled); + __set_intr_stub(EXCEP_SYSCALL0, system_call); + + __set_intr_stub(EXCEP_NMI, nmi_handler); + __set_intr_stub(EXCEP_WDT, nmi_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL0, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL1, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL2, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL3, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL4, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL5, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL6, irq_handler); + + IVAR0 = EXCEP_IRQ_LEVEL0; + IVAR1 = EXCEP_IRQ_LEVEL1; + IVAR2 = EXCEP_IRQ_LEVEL2; + IVAR3 = EXCEP_IRQ_LEVEL3; + IVAR4 = EXCEP_IRQ_LEVEL4; + IVAR5 = EXCEP_IRQ_LEVEL5; + IVAR6 = EXCEP_IRQ_LEVEL6; + +#ifndef CONFIG_MN10300_HAS_CACHE_SNOOP + mn10300_dcache_flush_inv(); + mn10300_icache_inv(); +#endif + + /* disable all interrupts and set to priority 6 (lowest) */ +#ifdef CONFIG_SMP + for (loop = 0; loop < GxICR_NUM_IRQS; loop++) + GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT; +#else /* !CONFIG_SMP */ + for (loop = 0; loop < NR_IRQS; loop++) + GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT; +#endif /* !CONFIG_SMP */ + + /* clear the timers */ + TM0MD = 0; + TM1MD = 0; + TM2MD = 0; + TM3MD = 0; + TM4MD = 0; + TM5MD = 0; + TM6MD = 0; + TM6MDA = 0; + TM6MDB = 0; + TM7MD = 0; + TM8MD = 0; + TM9MD = 0; + TM10MD = 0; + TM11MD = 0; + TM12MD = 0; + TM13MD = 0; + TM14MD = 0; + TM15MD = 0; + + calibrate_clock(); +} + +/* + * determine the memory size and base from the memory controller regs + */ +void __init get_mem_info(unsigned long *mem_base, unsigned long *mem_size) +{ + unsigned long memconf = MEMCONF; + unsigned long size = 0; /* order: MByte */ + + *mem_base = 0x90000000; /* fixed address */ + + switch (memconf & 0x00000003) { + case 0x01: + size = 256 / 8; /* 256 Mbit per chip */ + break; + case 0x02: + size = 512 / 8; /* 512 Mbit per chip */ + break; + case 0x03: + size = 1024 / 8; /* 1 Gbit per chip */ + break; + default: + panic("Invalid SDRAM size"); + break; + } + + printk(KERN_INFO "DDR2-SDRAM: %luMB x 2 @%08lx\n", size, *mem_base); + + *mem_size = (size * 2) << 20; +} diff --git a/arch/mn10300/unit-asb2303/include/unit/clock.h b/arch/mn10300/unit-asb2303/include/unit/clock.h index 2a0bf79ab968..0316907a012e 100644 --- a/arch/mn10300/unit-asb2303/include/unit/clock.h +++ b/arch/mn10300/unit-asb2303/include/unit/clock.h @@ -14,32 +14,11 @@ #ifndef __ASSEMBLY__ -#ifdef CONFIG_MN10300_RTC - -extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ -extern unsigned long mn10300_iobclk; -extern unsigned long mn10300_tsc_per_HZ; - -#define MN10300_IOCLK mn10300_ioclk -/* If this processors has a another clock, uncomment the below. */ -/* #define MN10300_IOBCLK mn10300_iobclk */ - -#else /* !CONFIG_MN10300_RTC */ - #define MN10300_IOCLK 33333333UL /* #define MN10300_IOBCLK 66666666UL */ -#endif /* !CONFIG_MN10300_RTC */ - -#define MN10300_JCCLK MN10300_IOCLK -#define MN10300_TSCCLK MN10300_IOCLK - -#ifdef CONFIG_MN10300_RTC -#define MN10300_TSC_PER_HZ mn10300_tsc_per_HZ -#else /* !CONFIG_MN10300_RTC */ -#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) -#endif /* !CONFIG_MN10300_RTC */ - #endif /* !__ASSEMBLY__ */ +#define MN10300_WDCLK MN10300_IOCLK + #endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2303/include/unit/serial.h b/arch/mn10300/unit-asb2303/include/unit/serial.h index 047566cd2e36..991e356bac5f 100644 --- a/arch/mn10300/unit-asb2303/include/unit/serial.h +++ b/arch/mn10300/unit-asb2303/include/unit/serial.h @@ -21,6 +21,11 @@ #define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ +/* + * The ASB2303 has an 18.432 MHz clock the UART + */ +#define BASE_BAUD (18432000 / 16) + /* * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports */ diff --git a/arch/mn10300/unit-asb2303/include/unit/timex.h b/arch/mn10300/unit-asb2303/include/unit/timex.h index f206b63c95b4..cc18fe7d8b90 100644 --- a/arch/mn10300/unit-asb2303/include/unit/timex.h +++ b/arch/mn10300/unit-asb2303/include/unit/timex.h @@ -1,6 +1,6 @@ -/* ASB2303-specific timer specifcations +/* ASB2303-specific timer specifications * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Copyright (C) 2007, 2010 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * * This program is free software; you can redistribute it and/or @@ -17,67 +17,72 @@ #include #include +#include /* * jiffies counter specifications */ #define TMJCBR_MAX 0xffff -#define TMJCBC TM01BC - -#define TMJCMD TM01MD -#define TMJCBR TM01BR #define TMJCIRQ TM1IRQ #define TMJCICR TM1ICR -#define TMJCICR_LEVEL GxICR_LEVEL_5 #ifndef __ASSEMBLY__ -static inline void startup_jiffies_counter(void) +#define MN10300_SRC_IOCLK MN10300_IOCLK + +#ifndef HZ +# error HZ undeclared. +#endif /* !HZ */ +/* use as little prescaling as possible to avoid losing accuracy */ +#if (MN10300_SRC_IOCLK + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 1 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK +#elif (MN10300_SRC_IOCLK / 8 + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 8 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_8 +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_8 +#elif (MN10300_SRC_IOCLK / 32 + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 32 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_32 +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_32 +#else +# error You lose. +#endif + +#define MN10300_JCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) +#define MN10300_TSCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) + +#define MN10300_JC_PER_HZ ((MN10300_JCCLK + HZ / 2) / HZ) +#define MN10300_TSC_PER_HZ ((MN10300_TSCCLK + HZ / 2) / HZ) + +static inline void stop_jiffies_counter(void) { - unsigned rate; - u16 md, t16; - - /* use as little prescaling as possible to avoid losing accuracy */ - md = TM0MD_SRC_IOCLK; - rate = MN10300_JCCLK / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_8; - rate = MN10300_JCCLK / 8 / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_32; - rate = MN10300_JCCLK / 32 / HZ; - - if (rate > TMJCBR_MAX) - BUG(); - } - } + u16 tmp; + TM01MD = JC_TIMER_CLKSRC | TM1MD_SRC_TM0CASCADE << 8; + tmp = TM01MD; +} - TMJCBR = rate - 1; - t16 = TMJCBR; +static inline void reload_jiffies_counter(u32 cnt) +{ + u32 tmp; - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_INIT_COUNTER | - TM1MD_INIT_COUNTER << 8; + TM01BR = cnt; + tmp = TM01BR; - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_COUNT_ENABLE | - TM1MD_COUNT_ENABLE << 8; + TM01MD = JC_TIMER_CLKSRC | \ + TM1MD_SRC_TM0CASCADE << 8 | \ + TM0MD_INIT_COUNTER | \ + TM1MD_INIT_COUNTER << 8; - t16 = TMJCMD; - TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; - t16 = TMJCICR; -} + TM01MD = JC_TIMER_CLKSRC | \ + TM1MD_SRC_TM0CASCADE << 8 | \ + TM0MD_COUNT_ENABLE | \ + TM1MD_COUNT_ENABLE << 8; -static inline void shutdown_jiffies_counter(void) -{ + tmp = TM01MD; } #endif /* !__ASSEMBLY__ */ @@ -94,29 +99,39 @@ static inline void shutdown_jiffies_counter(void) static inline void startup_timestamp_counter(void) { + u32 t32; + /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time * - count down from 4Gig-1 to 0 and wrap at IOCLK rate */ TM45BR = TMTSCBR_MAX; + t32 = TM45BR; - TM4MD = TM4MD_SRC_IOCLK; + TM4MD = TSC_TIMER_CLKSRC; TM4MD |= TM4MD_INIT_COUNTER; TM4MD &= ~TM4MD_INIT_COUNTER; TM4ICR = 0; + t32 = TM4ICR; TM5MD = TM5MD_SRC_TM4CASCADE; TM5MD |= TM5MD_INIT_COUNTER; TM5MD &= ~TM5MD_INIT_COUNTER; TM5ICR = 0; + t32 = TM5ICR; TM5MD |= TM5MD_COUNT_ENABLE; TM4MD |= TM4MD_COUNT_ENABLE; + t32 = TM5MD; + t32 = TM4MD; } static inline void shutdown_timestamp_counter(void) { + u8 t8; TM4MD = 0; TM5MD = 0; + t8 = TM4MD; + t8 = TM5MD; } /* @@ -127,7 +142,7 @@ typedef unsigned long cycles_t; static inline cycles_t read_timestamp_counter(void) { - return (cycles_t)TMTSCBC; + return (cycles_t)~TMTSCBC; } #endif /* !__ASSEMBLY__ */ diff --git a/arch/mn10300/unit-asb2303/unit-init.c b/arch/mn10300/unit-asb2303/unit-init.c index 70e8cb4ea266..834a76aa551a 100644 --- a/arch/mn10300/unit-asb2303/unit-init.c +++ b/arch/mn10300/unit-asb2303/unit-init.c @@ -31,6 +31,14 @@ asmlinkage void __init unit_init(void) SET_XIRQ_TRIGGER(3, XIRQ_TRIGGER_HILEVEL); SET_XIRQ_TRIGGER(4, XIRQ_TRIGGER_LOWLEVEL); SET_XIRQ_TRIGGER(5, XIRQ_TRIGGER_LOWLEVEL); + +#ifdef CONFIG_EXT_SERIAL_IRQ_LEVEL + set_intr_level(XIRQ0, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL)); +#endif + +#ifdef CONFIG_ETHERNET_IRQ_LEVEL + set_intr_level(XIRQ3, NUM2GxICR_LEVEL(CONFIG_ETHERNET_IRQ_LEVEL)); +#endif } /* @@ -51,7 +59,7 @@ void __init unit_init_IRQ(void) switch (GET_XIRQ_TRIGGER(extnum)) { case XIRQ_TRIGGER_HILEVEL: case XIRQ_TRIGGER_LOWLEVEL: - set_intr_postackable(XIRQ2IRQ(extnum)); + mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum)); break; default: break; diff --git a/arch/mn10300/unit-asb2305/include/unit/clock.h b/arch/mn10300/unit-asb2305/include/unit/clock.h index 67be3f2eb18e..29e3425431cf 100644 --- a/arch/mn10300/unit-asb2305/include/unit/clock.h +++ b/arch/mn10300/unit-asb2305/include/unit/clock.h @@ -14,32 +14,11 @@ #ifndef __ASSEMBLY__ -#ifdef CONFIG_MN10300_RTC - -extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ -extern unsigned long mn10300_iobclk; -extern unsigned long mn10300_tsc_per_HZ; - -#define MN10300_IOCLK mn10300_ioclk -/* If this processors has a another clock, uncomment the below. */ -/* #define MN10300_IOBCLK mn10300_iobclk */ - -#else /* !CONFIG_MN10300_RTC */ - #define MN10300_IOCLK 33333333UL /* #define MN10300_IOBCLK 66666666UL */ -#endif /* !CONFIG_MN10300_RTC */ - -#define MN10300_JCCLK MN10300_IOCLK -#define MN10300_TSCCLK MN10300_IOCLK - -#ifdef CONFIG_MN10300_RTC -#define MN10300_TSC_PER_HZ mn10300_tsc_per_HZ -#else /* !CONFIG_MN10300_RTC */ -#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) -#endif /* !CONFIG_MN10300_RTC */ - #endif /* !__ASSEMBLY__ */ +#define MN10300_WDCLK MN10300_IOCLK + #endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2305/include/unit/serial.h b/arch/mn10300/unit-asb2305/include/unit/serial.h index 8086cc092cec..88c08219315f 100644 --- a/arch/mn10300/unit-asb2305/include/unit/serial.h +++ b/arch/mn10300/unit-asb2305/include/unit/serial.h @@ -20,6 +20,11 @@ #define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ +/* + * The ASB2305 has an 18.432 MHz clock the UART + */ +#define BASE_BAUD (18432000 / 16) + /* * dispose of the /dev/ttyS0 serial port */ diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h index d1c72d59fa9f..758af30d1a16 100644 --- a/arch/mn10300/unit-asb2305/include/unit/timex.h +++ b/arch/mn10300/unit-asb2305/include/unit/timex.h @@ -1,6 +1,6 @@ -/* ASB2305 timer specifcations +/* ASB2305-specific timer specifications * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Copyright (C) 2007, 2010 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * * This program is free software; you can redistribute it and/or @@ -17,67 +17,72 @@ #include #include +#include /* * jiffies counter specifications */ #define TMJCBR_MAX 0xffff -#define TMJCBC TM01BC - -#define TMJCMD TM01MD -#define TMJCBR TM01BR #define TMJCIRQ TM1IRQ #define TMJCICR TM1ICR -#define TMJCICR_LEVEL GxICR_LEVEL_5 #ifndef __ASSEMBLY__ -static inline void startup_jiffies_counter(void) +#define MN10300_SRC_IOCLK MN10300_IOCLK + +#ifndef HZ +# error HZ undeclared. +#endif /* !HZ */ +/* use as little prescaling as possible to avoid losing accuracy */ +#if (MN10300_SRC_IOCLK + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 1 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK +#elif (MN10300_SRC_IOCLK / 8 + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 8 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_8 +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_8 +#elif (MN10300_SRC_IOCLK / 32 + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 32 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_32 +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_32 +#else +# error You lose. +#endif + +#define MN10300_JCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) +#define MN10300_TSCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) + +#define MN10300_JC_PER_HZ ((MN10300_JCCLK + HZ / 2) / HZ) +#define MN10300_TSC_PER_HZ ((MN10300_TSCCLK + HZ / 2) / HZ) + +static inline void stop_jiffies_counter(void) { - unsigned rate; - u16 md, t16; - - /* use as little prescaling as possible to avoid losing accuracy */ - md = TM0MD_SRC_IOCLK; - rate = MN10300_JCCLK / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_8; - rate = MN10300_JCCLK / 8 / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_32; - rate = MN10300_JCCLK / 32 / HZ; - - if (rate > TMJCBR_MAX) - BUG(); - } - } + u16 tmp; + TM01MD = JC_TIMER_CLKSRC | TM1MD_SRC_TM0CASCADE << 8; + tmp = TM01MD; +} - TMJCBR = rate - 1; - t16 = TMJCBR; +static inline void reload_jiffies_counter(u32 cnt) +{ + u32 tmp; - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_INIT_COUNTER | - TM1MD_INIT_COUNTER << 8; + TM01BR = cnt; + tmp = TM01BR; - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_COUNT_ENABLE | - TM1MD_COUNT_ENABLE << 8; + TM01MD = JC_TIMER_CLKSRC | \ + TM1MD_SRC_TM0CASCADE << 8 | \ + TM0MD_INIT_COUNTER | \ + TM1MD_INIT_COUNTER << 8; - t16 = TMJCMD; - TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; - t16 = TMJCICR; -} + TM01MD = JC_TIMER_CLKSRC | \ + TM1MD_SRC_TM0CASCADE << 8 | \ + TM0MD_COUNT_ENABLE | \ + TM1MD_COUNT_ENABLE << 8; -static inline void shutdown_jiffies_counter(void) -{ + tmp = TM01MD; } #endif /* !__ASSEMBLY__ */ @@ -94,29 +99,39 @@ static inline void shutdown_jiffies_counter(void) static inline void startup_timestamp_counter(void) { + u32 t32; + /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time * - count down from 4Gig-1 to 0 and wrap at IOCLK rate */ TM45BR = TMTSCBR_MAX; + t32 = TM45BR; - TM4MD = TM4MD_SRC_IOCLK; + TM4MD = TSC_TIMER_CLKSRC; TM4MD |= TM4MD_INIT_COUNTER; TM4MD &= ~TM4MD_INIT_COUNTER; TM4ICR = 0; + t32 = TM4ICR; TM5MD = TM5MD_SRC_TM4CASCADE; TM5MD |= TM5MD_INIT_COUNTER; TM5MD &= ~TM5MD_INIT_COUNTER; TM5ICR = 0; + t32 = TM5ICR; TM5MD |= TM5MD_COUNT_ENABLE; TM4MD |= TM4MD_COUNT_ENABLE; + t32 = TM5MD; + t32 = TM4MD; } static inline void shutdown_timestamp_counter(void) { + u8 t8; TM4MD = 0; TM5MD = 0; + t8 = TM4MD; + t8 = TM5MD; } /* @@ -127,7 +142,7 @@ typedef unsigned long cycles_t; static inline cycles_t read_timestamp_counter(void) { - return (cycles_t) TMTSCBC; + return (cycles_t)~TMTSCBC; } #endif /* !__ASSEMBLY__ */ diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c index 45b40ac6c464..8e6763e6f250 100644 --- a/arch/mn10300/unit-asb2305/pci-asb2305.c +++ b/arch/mn10300/unit-asb2305/pci-asb2305.c @@ -93,7 +93,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) struct pci_bus *bus; struct pci_dev *dev; int idx; - struct resource *r, *pr; + struct resource *r; /* Depth-First Search on bus tree */ list_for_each_entry(bus, bus_list, node) { @@ -105,10 +105,8 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) r = &dev->resource[idx]; if (!r->flags) continue; - pr = pci_find_parent_resource(dev, r); if (!r->start || - !pr || - request_resource(pr, r) < 0) { + pci_claim_resource(dev, idx) < 0) { printk(KERN_ERR "PCI:" " Cannot allocate resource" " region %d of bridge %s\n", @@ -131,7 +129,7 @@ static void __init pcibios_allocate_resources(int pass) struct pci_dev *dev = NULL; int idx, disabled; u16 command; - struct resource *r, *pr; + struct resource *r; for_each_pci_dev(dev) { pci_read_config_word(dev, PCI_COMMAND, &command); @@ -150,8 +148,7 @@ static void __init pcibios_allocate_resources(int pass) " (f=%lx, d=%d, p=%d)\n", pci_name(dev), r->start, r->end, r->flags, disabled, pass); - pr = pci_find_parent_resource(dev, r); - if (!pr || request_resource(pr, r) < 0) { + if (pci_claim_resource(dev, idx) < 0) { printk(KERN_ERR "PCI:" " Cannot allocate resource" " region %d of device %s\n", @@ -184,7 +181,7 @@ static void __init pcibios_allocate_resources(int pass) static int __init pcibios_assign_resources(void) { struct pci_dev *dev = NULL; - struct resource *r, *pr; + struct resource *r; if (!(pci_probe & PCI_ASSIGN_ROMS)) { /* Try to use BIOS settings for ROMs, otherwise let @@ -194,8 +191,7 @@ static int __init pcibios_assign_resources(void) r = &dev->resource[PCI_ROM_RESOURCE]; if (!r->flags || !r->start) continue; - pr = pci_find_parent_resource(dev, r); - if (!pr || request_resource(pr, r) < 0) { + if (pci_claim_resource(dev, PCI_ROM_RESOURCE) < 0) { r->end -= r->start; r->start = 0; } diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c index 6d8720a0a599..a4954fe82094 100644 --- a/arch/mn10300/unit-asb2305/pci.c +++ b/arch/mn10300/unit-asb2305/pci.c @@ -503,7 +503,7 @@ asmlinkage void __init unit_pci_init(void) struct pci_ops *o = &pci_direct_ampci; u32 x; - set_intr_level(XIRQ1, GxICR_LEVEL_3); + set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_PCI_IRQ_LEVEL)); memset(&bus, 0, sizeof(bus)); diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c index a76c8e0ab90f..e1becd6b7571 100644 --- a/arch/mn10300/unit-asb2305/unit-init.c +++ b/arch/mn10300/unit-asb2305/unit-init.c @@ -26,8 +26,10 @@ asmlinkage void __init unit_init(void) { #ifndef CONFIG_GDBSTUB_ON_TTYSx /* set the 16550 interrupt line to level 3 if not being used for GDB */ - set_intr_level(XIRQ0, GxICR_LEVEL_3); +#ifdef CONFIG_EXT_SERIAL_IRQ_LEVEL + set_intr_level(XIRQ0, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL)); #endif +#endif /* CONFIG_GDBSTUB_ON_TTYSx */ } /* @@ -51,7 +53,7 @@ void __init unit_init_IRQ(void) switch (GET_XIRQ_TRIGGER(extnum)) { case XIRQ_TRIGGER_HILEVEL: case XIRQ_TRIGGER_LOWLEVEL: - set_intr_postackable(XIRQ2IRQ(extnum)); + mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum)); break; default: break; diff --git a/arch/mn10300/unit-asb2364/Makefile b/arch/mn10300/unit-asb2364/Makefile new file mode 100644 index 000000000000..b3263ecfc4ff --- /dev/null +++ b/arch/mn10300/unit-asb2364/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for the linux kernel. +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). +# +# Note 2! The CFLAGS definitions are now in the main makefile... + +obj-y := unit-init.o leds.o irq-fpga.o + +obj-$(CONFIG_SMSC911X) += smsc911x.o diff --git a/arch/mn10300/unit-asb2364/include/unit/clock.h b/arch/mn10300/unit-asb2364/include/unit/clock.h new file mode 100644 index 000000000000..d34ac9a7508b --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/clock.h @@ -0,0 +1,29 @@ +/* clock.h: unit-specific clocks + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 23-Feb-2007 MEI Add define for watchdog timer. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_CLOCK_H +#define _ASM_UNIT_CLOCK_H + +#ifndef __ASSEMBLY__ + +#define MN10300_IOCLK 100000000UL /* for DDR800 */ +/*#define MN10300_IOCLK 83333333UL */ /* for DDR667 */ +#define MN10300_IOBCLK MN10300_IOCLK /* IOBCLK is equal to IOCLK */ + +#endif /* !__ASSEMBLY__ */ + +#define MN10300_WDCLK 27000000UL + +#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h b/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h new file mode 100644 index 000000000000..7cf12054db65 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h @@ -0,0 +1,52 @@ +/* ASB2364 FPGA registers + */ + +#ifndef _ASM_UNIT_FPGA_REGS_H +#define _ASM_UNIT_FPGA_REGS_H + +#include + +#ifdef __KERNEL__ + +#define ASB2364_FPGA_REG_RESET_LAN __SYSREG(0xa9001300, u16) +#define ASB2364_FPGA_REG_RESET_UART __SYSREG(0xa9001304, u16) +#define ASB2364_FPGA_REG_RESET_I2C __SYSREG(0xa9001308, u16) +#define ASB2364_FPGA_REG_RESET_USB __SYSREG(0xa900130c, u16) +#define ASB2364_FPGA_REG_RESET_AV __SYSREG(0xa9001310, u16) + +#define ASB2364_FPGA_REG_IRQ(X) __SYSREG(0xa9001590+((X)*4), u16) +#define ASB2364_FPGA_REG_IRQ_LAN ASB2364_FPGA_REG_IRQ(0) +#define ASB2364_FPGA_REG_IRQ_UART ASB2364_FPGA_REG_IRQ(1) +#define ASB2364_FPGA_REG_IRQ_I2C ASB2364_FPGA_REG_IRQ(2) +#define ASB2364_FPGA_REG_IRQ_USB ASB2364_FPGA_REG_IRQ(3) +#define ASB2364_FPGA_REG_IRQ_FPGA ASB2364_FPGA_REG_IRQ(5) + +#define ASB2364_FPGA_REG_MASK(X) __SYSREG(0xa9001590+((X)*4), u16) +#define ASB2364_FPGA_REG_MASK_LAN ASB2364_FPGA_REG_MASK(0) +#define ASB2364_FPGA_REG_MASK_UART ASB2364_FPGA_REG_MASK(1) +#define ASB2364_FPGA_REG_MASK_I2C ASB2364_FPGA_REG_MASK(2) +#define ASB2364_FPGA_REG_MASK_USB ASB2364_FPGA_REG_MASK(3) +#define ASB2364_FPGA_REG_MASK_FPGA ASB2364_FPGA_REG_MASK(5) + +#define ASB2364_FPGA_REG_CPLD5_SET1 __SYSREG(0xa9002500, u16) +#define ASB2364_FPGA_REG_CPLD5_SET2 __SYSREG(0xa9002504, u16) +#define ASB2364_FPGA_REG_CPLD6_SET1 __SYSREG(0xa9002600, u16) +#define ASB2364_FPGA_REG_CPLD6_SET2 __SYSREG(0xa9002604, u16) +#define ASB2364_FPGA_REG_CPLD7_SET1 __SYSREG(0xa9002700, u16) +#define ASB2364_FPGA_REG_CPLD7_SET2 __SYSREG(0xa9002704, u16) +#define ASB2364_FPGA_REG_CPLD8_SET1 __SYSREG(0xa9002800, u16) +#define ASB2364_FPGA_REG_CPLD8_SET2 __SYSREG(0xa9002804, u16) +#define ASB2364_FPGA_REG_CPLD9_SET1 __SYSREG(0xa9002900, u16) +#define ASB2364_FPGA_REG_CPLD9_SET2 __SYSREG(0xa9002904, u16) +#define ASB2364_FPGA_REG_CPLD10_SET1 __SYSREG(0xa9002a00, u16) +#define ASB2364_FPGA_REG_CPLD10_SET2 __SYSREG(0xa9002a04, u16) + +#define SyncExBus() \ + do { \ + unsigned short w; \ + w = *(volatile short *)0xa9000000; \ + } while (0) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_UNIT_FPGA_REGS_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/irq.h b/arch/mn10300/unit-asb2364/include/unit/irq.h new file mode 100644 index 000000000000..786148e46565 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/irq.h @@ -0,0 +1,35 @@ +/* ASB2364 FPGA irq numbers + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _UNIT_IRQ_H +#define _UNIT_IRQ_H + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_SMP +#define NR_CPU_IRQS GxICR_NUM_EXT_IRQS +#else +#define NR_CPU_IRQS GxICR_NUM_IRQS +#endif + +enum { + FPGA_LAN_IRQ = NR_CPU_IRQS, + FPGA_UART_IRQ, + FPGA_I2C_IRQ, + FPGA_USB_IRQ, + FPGA_RESERVED_IRQ, + FPGA_FPGA_IRQ, + NR_IRQS +}; + +extern void __init irq_fpga_init(void); + +#endif /* !__ASSEMBLY__ */ +#endif /* _UNIT_IRQ_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/leds.h b/arch/mn10300/unit-asb2364/include/unit/leds.h new file mode 100644 index 000000000000..03a3933ad323 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/leds.h @@ -0,0 +1,54 @@ +/* Unit-specific leds + * + * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_LEDS_H +#define _ASM_UNIT_LEDS_H + +#include +#include +#include + +#define MN10300_USE_7SEGLEDS 0 + +#define ASB2364_7SEGLEDS __SYSREG(0xA9001630, u32) + +/* + * use the 7-segment LEDs to indicate states + */ + +#if MN10300_USE_7SEGLEDS +/* flip the 7-segment LEDs between "Gdb-" and "----" */ +#define mn10300_set_gdbleds(ONOFF) \ + do { \ + ASB2364_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \ + } while (0) +#else +#define mn10300_set_gdbleds(ONOFF) do {} while (0) +#endif + +#if MN10300_USE_7SEGLEDS +/* indicate double-fault by displaying "db-f" on the LEDs */ +#define mn10300_set_dbfleds \ + mov 0x43077f1d,d0 ; \ + mov d0,(ASB2364_7SEGLEDS) +#else +#define mn10300_set_dbfleds +#endif + +#ifndef __ASSEMBLY__ +extern void peripheral_leds_display_exception(enum exception_code); +extern void peripheral_leds_led_chase(void); +extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int); +extern void debug_to_serial(const char *, int); +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UNIT_LEDS_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/serial.h b/arch/mn10300/unit-asb2364/include/unit/serial.h new file mode 100644 index 000000000000..7f048bbfdfd7 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/serial.h @@ -0,0 +1,151 @@ +/* Unit-specific 8250 serial ports + * + * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_SERIAL_H +#define _ASM_UNIT_SERIAL_H + +#include +#include +#include +#include + +#define SERIAL_PORT0_BASE_ADDRESS 0xA8200000 + +#define SERIAL_IRQ XIRQ1 /* single serial (TL16C550C) (Lo) */ + +/* + * The ASB2364 has an 12.288 MHz clock + * for your UART. + * + * It'd be nice if someone built a serial card with a 24.576 MHz + * clock, since the 16550A is capable of handling a top speed of 1.5 + * megabits/second; but this requires the faster clock. + */ +#define BASE_BAUD (12288000 / 16) + +/* + * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports + */ +#ifndef CONFIG_GDBSTUB_ON_TTYSx + +#define SERIAL_PORT_DFNS \ + { \ + .baud_base = BASE_BAUD, \ + .irq = SERIAL_IRQ, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ + .iomem_reg_shift = 1, \ + .io_type = SERIAL_IO_MEM, \ + }, + +#ifndef __ASSEMBLY__ + +static inline void __debug_to_serial(const char *p, int n) +{ +} + +#endif /* !__ASSEMBLY__ */ + +#else /* CONFIG_GDBSTUB_ON_TTYSx */ + +#define SERIAL_PORT_DFNS /* stolen by gdb-stub */ + +#if defined(CONFIG_GDBSTUB_ON_TTYS0) +#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) +#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) +#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) +#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) +#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) +#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) +#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) +#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) +#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) +#define GDBPORT_SERIAL_IRQ SERIAL_IRQ + +#elif defined(CONFIG_GDBSTUB_ON_TTYS1) +#error The ASB2364 does not have a /dev/ttyS1 +#endif + +#ifndef __ASSEMBLY__ + +static inline void __debug_to_serial(const char *p, int n) +{ + char ch; + +#define LSR_WAIT_FOR(STATE) \ + do {} while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) +#define FLOWCTL_QUERY(LINE) \ + ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; }) +#define FLOWCTL_WAIT_FOR(LINE) \ + do {} while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) +#define FLOWCTL_CLEAR(LINE) \ + do { GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; } while (0) +#define FLOWCTL_SET(LINE) \ + do { GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; } while (0) + + FLOWCTL_SET(DTR); + + for (; n > 0; n--) { + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + + ch = *p++; + if (ch == 0x0a) { + GDBPORT_SERIAL_TX = 0x0d; + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + } + GDBPORT_SERIAL_TX = ch; + } + + FLOWCTL_CLEAR(DTR); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_GDBSTUB_ON_TTYSx */ + +#define SERIAL_INITIALIZE \ +do { \ + /* release reset */ \ + ASB2364_FPGA_REG_RESET_UART = 0x0001; \ + SyncExBus(); \ +} while (0) + +#define SERIAL_CHECK_INTERRUPT \ +do { \ + if ((ASB2364_FPGA_REG_IRQ_UART & 0x0001) == 0x0001) { \ + return IRQ_NONE; \ + } \ +} while (0) + +#define SERIAL_CLEAR_INTERRUPT \ +do { \ + ASB2364_FPGA_REG_IRQ_UART = 0x0001; \ + SyncExBus(); \ +} while (0) + +#define SERIAL_SET_INT_MASK \ +do { \ + ASB2364_FPGA_REG_MASK_UART = 0x0001; \ + SyncExBus(); \ +} while (0) + +#define SERIAL_CLEAR_INT_MASK \ +do { \ + ASB2364_FPGA_REG_MASK_UART = 0x0000; \ + SyncExBus(); \ +} while (0) + +#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/smsc911x.h b/arch/mn10300/unit-asb2364/include/unit/smsc911x.h new file mode 100644 index 000000000000..4c1ede535fa9 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/smsc911x.h @@ -0,0 +1,171 @@ +/* Support for the SMSC911x NIC + * + * Copyright (C) 2006 Matsushita Electric Industrial Co., Ltd. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_SMSC911X_H +#define _ASM_UNIT_SMSC911X_H + +#include +#include +#include + +#define MN10300_USE_EXT_EEPROM + + +#define SMSC911X_BASE 0xA8000000UL +#define SMSC911X_BASE_END 0xA8000100UL +#define SMSC911X_IRQ FPGA_LAN_IRQ + +/* + * Allow the FPGA to be initialised by the SMSC911x driver + */ +#undef SMSC_INITIALIZE +#define SMSC_INITIALIZE() \ +do { \ + /* release reset */ \ + ASB2364_FPGA_REG_RESET_LAN = 0x0001; \ + SyncExBus(); \ +} while (0) + +#ifdef MN10300_USE_EXT_EEPROM +#include +#include + +#define EEPROM_ADDRESS 0xA0 +#define MAC_OFFSET 0x0008 +#define USE_IIC_CH 0 /* 0 or 1 */ +#define IIC_OFFSET (0x80000 * USE_IIC_CH) +#define IIC_DTRM __SYSREG(0xd8400000 + IIC_OFFSET, u32) +#define IIC_DREC __SYSREG(0xd8400004 + IIC_OFFSET, u32) +#define IIC_MYADD __SYSREG(0xd8400008 + IIC_OFFSET, u32) +#define IIC_CLK __SYSREG(0xd840000c + IIC_OFFSET, u32) +#define IIC_BRST __SYSREG(0xd8400010 + IIC_OFFSET, u32) +#define IIC_HOLD __SYSREG(0xd8400014 + IIC_OFFSET, u32) +#define IIC_BSTS __SYSREG(0xd8400018 + IIC_OFFSET, u32) +#define IIC_ICR __SYSREG(0xd4000080 + 4 * USE_IIC_CH, u16) + +#define IIC_CLK_PLS ((unsigned short)(MN10300_IOCLK / 100000 - 1)) +#define IIC_CLK_LOW ((unsigned short)(IIC_CLK_PLS / 2)) + +#define SYS_IIC_DTRM_Bit_STA ((unsigned short)0x0400) +#define SYS_IIC_DTRM_Bit_STO ((unsigned short)0x0200) +#define SYS_IIC_DTRM_Bit_ACK ((unsigned short)0x0100) +#define SYS_IIC_DTRM_Bit_DATA ((unsigned short)0x00FF) + +static inline void POLL_INT_REQ(volatile u16 *icr) +{ + unsigned long flags; + u16 tmp; + + while (!(*icr & GxICR_REQUEST)) + ; + flags = arch_local_cli_save(); + tmp = *icr; + *icr = (tmp & GxICR_LEVEL) | GxICR_DETECT; + tmp = *icr; + arch_local_irq_restore(flags); +} + +/* + * Implement the SMSC911x hook for MAC address retrieval + */ +#undef smsc_get_mac +static inline int smsc_get_mac(struct net_device *dev) +{ + unsigned char *mac_buf = dev->dev_addr; + int i; + unsigned short value; + unsigned int data; + int mac_length = 6; + int check; + u16 orig_gicr, tmp; + unsigned long flags; + + /* save original GnICR and clear GnICR.IE */ + flags = arch_local_cli_save(); + orig_gicr = IIC_ICR; + IIC_ICR = orig_gicr & GxICR_LEVEL; + tmp = IIC_ICR; + arch_local_irq_restore(flags); + + IIC_MYADD = 0x00000008; + IIC_CLK = (IIC_CLK_LOW << 16) + (IIC_CLK_PLS); + /* bus hung recovery */ + + while (1) { + check = 0; + for (i = 0; i < 3; i++) { + if ((IIC_BSTS & 0x00000003) == 0x00000003) + check++; + udelay(3); + } + + if (check == 3) { + IIC_BRST = 0x00000003; + break; + } else { + for (i = 0; i < 3; i++) { + IIC_BRST = 0x00000002; + udelay(8); + IIC_BRST = 0x00000003; + udelay(8); + } + } + } + + IIC_BRST = 0x00000002; + IIC_BRST = 0x00000003; + + value = SYS_IIC_DTRM_Bit_STA | SYS_IIC_DTRM_Bit_ACK; + value |= (((unsigned short)EEPROM_ADDRESS & SYS_IIC_DTRM_Bit_DATA) | + (unsigned short)0x0000); + IIC_DTRM = value; + POLL_INT_REQ(&IIC_ICR); + + /** send offset of MAC address in EEPROM **/ + IIC_DTRM = (unsigned char)((MAC_OFFSET & 0xFF00) >> 8); + POLL_INT_REQ(&IIC_ICR); + + IIC_DTRM = (unsigned char)(MAC_OFFSET & 0x00FF); + POLL_INT_REQ(&IIC_ICR); + + udelay(1000); + + value = SYS_IIC_DTRM_Bit_STA; + value |= (((unsigned short)EEPROM_ADDRESS & SYS_IIC_DTRM_Bit_DATA) | + (unsigned short)0x0001); + IIC_DTRM = value; + POLL_INT_REQ(&IIC_ICR); + + IIC_DTRM = 0x00000000; + while (mac_length > 0) { + POLL_INT_REQ(&IIC_ICR); + + data = IIC_DREC; + mac_length--; + if (mac_length == 0) + value = 0x00000300; /* stop IIC bus */ + else if (mac_length == 1) + value = 0x00000100; /* no ack */ + else + value = 0x00000000; /* ack */ + IIC_DTRM = value; + *mac_buf++ = (unsigned char)(data & 0xff); + } + + /* restore GnICR.LV and GnICR.IE */ + flags = arch_local_cli_save(); + IIC_ICR = (orig_gicr & (GxICR_LEVEL | GxICR_ENABLE)); + tmp = IIC_ICR; + arch_local_irq_restore(flags); + + return 0; +} +#endif /* MN10300_USE_EXT_EEPROM */ +#endif /* _ASM_UNIT_SMSC911X_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/timex.h b/arch/mn10300/unit-asb2364/include/unit/timex.h new file mode 100644 index 000000000000..ddb7ed010706 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/timex.h @@ -0,0 +1,159 @@ +/* timex.h: MN2WS0038 architecture timer specifications + * + * Copyright (C) 2002, 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_TIMEX_H +#define _ASM_UNIT_TIMEX_H + +#ifndef __ASSEMBLY__ +#include +#endif /* __ASSEMBLY__ */ + +#include +#include +#include + +/* + * jiffies counter specifications + */ + +#define TMJCBR_MAX 0xffffff /* 24bit */ +#define TMJCIRQ TMTIRQ + +#ifndef __ASSEMBLY__ + +#define MN10300_SRC_IOBCLK MN10300_IOBCLK + +#ifndef HZ +# error HZ undeclared. +#endif /* !HZ */ + +#define MN10300_JCCLK (MN10300_SRC_IOBCLK) +#define MN10300_TSCCLK (MN10300_SRC_IOBCLK) + +#define MN10300_JC_PER_HZ ((MN10300_JCCLK + HZ / 2) / HZ) +#define MN10300_TSC_PER_HZ ((MN10300_TSCCLK + HZ / 2) / HZ) + +/* Check bit width of MTM interval value that sets base register */ +#if (MN10300_JC_PER_HZ - 1) > TMJCBR_MAX +# error MTM tick timer interval value is overflow. +#endif + +static inline void stop_jiffies_counter(void) +{ + u16 tmp; + TMTMD = 0; + tmp = TMTMD; +} + +static inline void reload_jiffies_counter(u32 cnt) +{ + u32 tmp; + + TMTBR = cnt; + tmp = TMTBR; + + TMTMD = TMTMD_TMTLDE; + TMTMD = TMTMD_TMTCNE; + tmp = TMTMD; +} + +#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_CLOCKEVENTS) && \ + !defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) +/* + * If we aren't using broadcasting, each core needs its own event timer. + * Since CPU0 uses the tick timer which is 24-bits, we use timer 4 & 5 + * cascaded to 32-bits for CPU1 (but only really use 24-bits to match + * CPU0). + */ + +#define TMJC1IRQ TM5IRQ + +static inline void stop_jiffies_counter1(void) +{ + u8 tmp; + TM4MD = 0; + TM5MD = 0; + tmp = TM4MD; + tmp = TM5MD; +} + +static inline void reload_jiffies_counter1(u32 cnt) +{ + u32 tmp; + + TM45BR = cnt; + tmp = TM45BR; + + TM4MD = TM4MD_INIT_COUNTER; + tmp = TM4MD; + + TM5MD = TM5MD_SRC_TM4CASCADE | TM5MD_INIT_COUNTER; + TM5MD = TM5MD_SRC_TM4CASCADE | TM5MD_COUNT_ENABLE; + tmp = TM5MD; + + TM4MD = TM4MD_COUNT_ENABLE; + tmp = TM4MD; +} +#endif /* CONFIG_SMP&GENERIC_CLOCKEVENTS&!GENERIC_CLOCKEVENTS_BROADCAST */ + +#endif /* !__ASSEMBLY__ */ + + +/* + * timestamp counter specifications + */ +#define TMTSCBR_MAX 0xffffffff + +#ifndef __ASSEMBLY__ + +/* Use 32-bit timestamp counter */ +#define TMTSCMD TMSMD +#define TMTSCBR TMSBR +#define TMTSCBC TMSBC +#define TMTSCICR TMSICR + +static inline void startup_timestamp_counter(void) +{ + u32 sync; + + /* set up TMS(Timestamp) 32bit timer register to count real time + * - count down from 4Gig-1 to 0 and wrap at IOBCLK rate + */ + + TMTSCBR = TMTSCBR_MAX; + sync = TMTSCBR; + + TMTSCICR = 0; + sync = TMTSCICR; + + TMTSCMD = TMTMD_TMTLDE; + TMTSCMD = TMTMD_TMTCNE; + sync = TMTSCMD; +} + +static inline void shutdown_timestamp_counter(void) +{ + TMTSCMD = 0; +} + +/* + * we use a cascaded pair of 16-bit down-counting timers to count I/O + * clock cycles for the purposes of time keeping + */ +typedef unsigned long cycles_t; + +static inline cycles_t read_timestamp_counter(void) +{ + return (cycles_t)~TMTSCBC; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/arch/mn10300/unit-asb2364/irq-fpga.c b/arch/mn10300/unit-asb2364/irq-fpga.c new file mode 100644 index 000000000000..fcf29754e4d1 --- /dev/null +++ b/arch/mn10300/unit-asb2364/irq-fpga.c @@ -0,0 +1,96 @@ +/* ASB2364 FPGA interrupt multiplexing + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#include +#include +#include +#include + +/* + * FPGA PIC operations + */ +static void asb2364_fpga_mask(unsigned int irq) +{ + ASB2364_FPGA_REG_MASK(irq - NR_CPU_IRQS) = 0x0001; + SyncExBus(); +} + +static void asb2364_fpga_ack(unsigned int irq) +{ + ASB2364_FPGA_REG_IRQ(irq - NR_CPU_IRQS) = 0x0001; + SyncExBus(); +} + +static void asb2364_fpga_mask_ack(unsigned int irq) +{ + ASB2364_FPGA_REG_MASK(irq - NR_CPU_IRQS) = 0x0001; + SyncExBus(); + ASB2364_FPGA_REG_IRQ(irq - NR_CPU_IRQS) = 0x0001; + SyncExBus(); +} + +static void asb2364_fpga_unmask(unsigned int irq) +{ + ASB2364_FPGA_REG_MASK(irq - NR_CPU_IRQS) = 0x0000; + SyncExBus(); +} + +static struct irq_chip asb2364_fpga_pic = { + .name = "fpga", + .ack = asb2364_fpga_ack, + .mask = asb2364_fpga_mask, + .mask_ack = asb2364_fpga_mask_ack, + .unmask = asb2364_fpga_unmask, +}; + +/* + * FPGA PIC interrupt handler + */ +static irqreturn_t fpga_interrupt(int irq, void *_mask) +{ + if ((ASB2364_FPGA_REG_IRQ_LAN & 0x0001) != 0x0001) + generic_handle_irq(FPGA_LAN_IRQ); + if ((ASB2364_FPGA_REG_IRQ_UART & 0x0001) != 0x0001) + generic_handle_irq(FPGA_UART_IRQ); + if ((ASB2364_FPGA_REG_IRQ_I2C & 0x0001) != 0x0001) + generic_handle_irq(FPGA_I2C_IRQ); + if ((ASB2364_FPGA_REG_IRQ_USB & 0x0001) != 0x0001) + generic_handle_irq(FPGA_USB_IRQ); + if ((ASB2364_FPGA_REG_IRQ_FPGA & 0x0001) != 0x0001) + generic_handle_irq(FPGA_FPGA_IRQ); + + return IRQ_HANDLED; +} + +/* + * Define an interrupt action for each FPGA PIC output + */ +static struct irqaction fpga_irq[] = { + [0] = { + .handler = fpga_interrupt, + .flags = IRQF_DISABLED | IRQF_SHARED, + .name = "fpga", + }, +}; + +/* + * Initialise the FPGA's PIC + */ +void __init irq_fpga_init(void) +{ + int irq; + + for (irq = NR_CPU_IRQS; irq < NR_IRQS; irq++) + set_irq_chip_and_handler(irq, &asb2364_fpga_pic, handle_level_irq); + + /* the FPGA drives the XIRQ1 input on the CPU PIC */ + setup_irq(XIRQ1, &fpga_irq[0]); +} diff --git a/arch/mn10300/unit-asb2364/leds.c b/arch/mn10300/unit-asb2364/leds.c new file mode 100644 index 000000000000..1ff830c372b3 --- /dev/null +++ b/arch/mn10300/unit-asb2364/leds.c @@ -0,0 +1,98 @@ +/* leds.c: ASB2364 peripheral 7seg LEDs x4 support + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include + +#include +#include +#include +#include +#include + +#if MN10300_USE_7SEGLEDS +static const u8 asb2364_led_hex_tbl[16] = { + 0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0, + 0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c +}; + +static const u32 asb2364_led_chase_tbl[6] = { + ~0x02020202, /* top - segA */ + ~0x04040404, /* right top - segB */ + ~0x08080808, /* right bottom - segC */ + ~0x10101010, /* bottom - segD */ + ~0x20202020, /* left bottom - segE */ + ~0x40404040, /* left top - segF */ +}; + +static unsigned asb2364_led_chase; + +void peripheral_leds7x4_display_dec(unsigned int val, unsigned int points) +{ + u32 leds; + + leds = asb2364_led_hex_tbl[(val/1000) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(val/100) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(val/10) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[val % 10]; + leds |= points^0x01010101; + + ASB2364_7SEGLEDS = leds; +} + +void peripheral_leds7x4_display_hex(unsigned int val, unsigned int points) +{ + u32 leds; + + leds = asb2364_led_hex_tbl[(val/1000) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(val/100) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(val/10) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[val % 10]; + leds |= points^0x01010101; + + ASB2364_7SEGLEDS = leds; +} + +/* display triple horizontal bar and exception code */ +void peripheral_leds_display_exception(enum exception_code code) +{ + u32 leds; + + leds = asb2364_led_hex_tbl[(code/0x100) % 0x10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(code/0x10) % 0x10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[code % 0x10]; + leds |= 0x6d010101; + + ASB2364_7SEGLEDS = leds; +} + +void peripheral_leds_led_chase(void) +{ + ASB2364_7SEGLEDS = asb2364_led_chase_tbl[asb2364_led_chase]; + asb2364_led_chase++; + if (asb2364_led_chase >= 6) + asb2364_led_chase = 0; +} +#else /* MN10300_USE_7SEGLEDS */ +void peripheral_leds7x4_display_dec(unsigned int val, unsigned int points) { } +void peripheral_leds7x4_display_hex(unsigned int val, unsigned int points) { } +void peripheral_leds_display_exception(enum exception_code code) { } +void peripheral_leds_led_chase(void) { } +#endif /* MN10300_USE_7SEGLEDS */ diff --git a/arch/mn10300/unit-asb2364/smsc911x.c b/arch/mn10300/unit-asb2364/smsc911x.c new file mode 100644 index 000000000000..544a73e94c81 --- /dev/null +++ b/arch/mn10300/unit-asb2364/smsc911x.c @@ -0,0 +1,58 @@ +/* Specification for the SMSC911x NIC + * + * Copyright (C) 2006 Matsushita Electric Industrial Co., Ltd. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT, +}; + +static struct resource smsc911x_resources[] = { + [0] = { + .start = SMSC911X_BASE, + .end = SMSC911X_BASE_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SMSC911X_IRQ, + .end = SMSC911X_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = 0, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + } +}; + +/* + * add platform devices + */ +static int __init unit_device_init(void) +{ + platform_device_register(&smsc911x_device); + return 0; +} + +device_initcall(unit_device_init); diff --git a/arch/mn10300/unit-asb2364/unit-init.c b/arch/mn10300/unit-asb2364/unit-init.c new file mode 100644 index 000000000000..11440803db10 --- /dev/null +++ b/arch/mn10300/unit-asb2364/unit-init.c @@ -0,0 +1,88 @@ +/* ASB2364 initialisation + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +/* + * initialise some of the unit hardware before gdbstub is set up + */ +asmlinkage void __init unit_init(void) +{ + /* set up the external interrupts */ + + /* XIRQ[0]: NAND RXBY */ + /* SET_XIRQ_TRIGGER(0, XIRQ_TRIGGER_LOWLEVEL); */ + + /* XIRQ[1]: LAN, UART, I2C, USB, PCI, FPGA */ + SET_XIRQ_TRIGGER(1, XIRQ_TRIGGER_LOWLEVEL); + + /* XIRQ[2]: Extend Slot 1-9 */ + /* SET_XIRQ_TRIGGER(2, XIRQ_TRIGGER_LOWLEVEL); */ + +#if defined(CONFIG_EXT_SERIAL_IRQ_LEVEL) && \ + defined(CONFIG_ETHERNET_IRQ_LEVEL) && \ + (CONFIG_EXT_SERIAL_IRQ_LEVEL != CONFIG_ETHERNET_IRQ_LEVEL) +# error CONFIG_EXT_SERIAL_IRQ_LEVEL != CONFIG_ETHERNET_IRQ_LEVEL +#endif + +#if defined(CONFIG_EXT_SERIAL_IRQ_LEVEL) + set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL)); +#elif defined(CONFIG_ETHERNET_IRQ_LEVEL) + set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_ETHERNET_IRQ_LEVEL)); +#endif +} + +/* + * initialise the rest of the unit hardware after gdbstub is ready + */ +asmlinkage void __init unit_setup(void) +{ + +} + +/* + * initialise the external interrupts used by a unit of this type + */ +void __init unit_init_IRQ(void) +{ + unsigned int extnum; + + for (extnum = 0 ; extnum < NR_XIRQS ; extnum++) { + switch (GET_XIRQ_TRIGGER(extnum)) { + /* LEVEL triggered interrupts should be made + * post-ACK'able as they hold their lines until + * serviced + */ + case XIRQ_TRIGGER_HILEVEL: + case XIRQ_TRIGGER_LOWLEVEL: + mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum)); + break; + default: + break; + } + } + +#define IRQCTL __SYSREG(0xd5000090, u32) + IRQCTL |= 0x02; + + irq_fpga_init(); +} diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 86fe67fd49ba..9334539ebf75 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1041,7 +1041,7 @@ config SMC911X tristate "SMSC LAN911[5678] support" select CRC32 select MII - depends on ARM || SUPERH + depends on ARM || SUPERH || MN10300 help This is a driver for SMSC's LAN911x series of Ethernet chipsets including the new LAN9115, LAN9116, LAN9117, and LAN9118. @@ -1055,7 +1055,7 @@ config SMC911X config SMSC911X tristate "SMSC LAN911x/LAN921x families embedded ethernet support" - depends on ARM || SUPERH || BLACKFIN || MIPS + depends on ARM || SUPERH || BLACKFIN || MIPS || MN10300 select CRC32 select MII select PHYLIB @@ -1067,6 +1067,14 @@ config SMSC911X . The module will be called smsc911x. +config SMSC911X_ARCH_HOOKS + def_bool n + depends on SMSC911X + help + If the arch enables this, it allows the arch to implement various + hooks for more comprehensive interrupt control and also to override + the source of the MAC address. + config NET_VENDOR_RACAL bool "Racal-Interlan (Micom) NI cards" depends on ISA diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index a8e5856ce882..64bfdae5956f 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -2075,7 +2075,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev) } else { /* Try reading mac address from device. if EEPROM is present * it will already have been set */ - smsc911x_read_mac_address(dev); + smsc_get_mac(dev); if (is_valid_ether_addr(dev->dev_addr)) { /* eeprom values are valid so use them */ @@ -2176,6 +2176,7 @@ static struct platform_driver smsc911x_driver = { /* Entry point for loading the module */ static int __init smsc911x_init_module(void) { + SMSC_INITIALIZE(); return platform_driver_register(&smsc911x_driver); } diff --git a/drivers/net/smsc911x.h b/drivers/net/smsc911x.h index 016360c65ce2..52f38e12a879 100644 --- a/drivers/net/smsc911x.h +++ b/drivers/net/smsc911x.h @@ -394,4 +394,15 @@ #define LPA_PAUSE_ALL (LPA_PAUSE_CAP | \ LPA_PAUSE_ASYM) +/* + * Provide hooks to let the arch add to the initialisation procedure + * and to override the source of the MAC address. + */ +#define SMSC_INITIALIZE() do {} while (0) +#define smsc_get_mac(dev) smsc911x_read_mac_address((dev)) + +#ifdef CONFIG_SMSC911X_ARCH_HOOKS +#include +#endif + #endif /* __SMSC911X_H__ */ diff --git a/include/linux/smp.h b/include/linux/smp.h index cfa2d20e35f1..6dc95cac6b3d 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -13,9 +13,10 @@ extern void cpu_idle(void); +typedef void (*smp_call_func_t)(void *info); struct call_single_data { struct list_head list; - void (*func) (void *info); + smp_call_func_t func; void *info; u16 flags; u16 priv; @@ -24,8 +25,8 @@ struct call_single_data { /* total number of cpus in this system (may exceed NR_CPUS) */ extern unsigned int total_cpus; -int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, - int wait); +int smp_call_function_single(int cpuid, smp_call_func_t func, void *info, + int wait); #ifdef CONFIG_SMP @@ -69,15 +70,15 @@ extern void smp_cpus_done(unsigned int max_cpus); /* * Call a function on all other processors */ -int smp_call_function(void(*func)(void *info), void *info, int wait); +int smp_call_function(smp_call_func_t func, void *info, int wait); void smp_call_function_many(const struct cpumask *mask, - void (*func)(void *info), void *info, bool wait); + smp_call_func_t func, void *info, bool wait); void __smp_call_function_single(int cpuid, struct call_single_data *data, int wait); int smp_call_function_any(const struct cpumask *mask, - void (*func)(void *info), void *info, int wait); + smp_call_func_t func, void *info, int wait); /* * Generic and arch helpers @@ -94,7 +95,7 @@ void ipi_call_unlock_irq(void); /* * Call a function on all processors */ -int on_each_cpu(void (*func) (void *info), void *info, int wait); +int on_each_cpu(smp_call_func_t func, void *info, int wait); #define MSG_ALL_BUT_SELF 0x8000 /* Assume <32768 CPU's */ #define MSG_ALL 0x8001 @@ -122,7 +123,7 @@ static inline void smp_send_stop(void) { } * These macros fold the SMP functionality into a single CPU system */ #define raw_smp_processor_id() 0 -static inline int up_smp_call_function(void (*func)(void *), void *info) +static inline int up_smp_call_function(smp_call_func_t func, void *info) { return 0; } @@ -143,7 +144,7 @@ static inline void smp_send_reschedule(int cpu) { } static inline void init_call_single_data(void) { } static inline int -smp_call_function_any(const struct cpumask *mask, void (*func)(void *info), +smp_call_function_any(const struct cpumask *mask, smp_call_func_t func, void *info, int wait) { return smp_call_function_single(0, func, info, wait); diff --git a/kernel/smp.c b/kernel/smp.c index ed6aacfcb7ef..12ed8b013e2d 100644 --- a/kernel/smp.c +++ b/kernel/smp.c @@ -267,7 +267,7 @@ static DEFINE_PER_CPU_SHARED_ALIGNED(struct call_single_data, csd_data); * * Returns 0 on success, else a negative status code. */ -int smp_call_function_single(int cpu, void (*func) (void *info), void *info, +int smp_call_function_single(int cpu, smp_call_func_t func, void *info, int wait) { struct call_single_data d = { @@ -336,7 +336,7 @@ EXPORT_SYMBOL(smp_call_function_single); * 3) any other online cpu in @mask */ int smp_call_function_any(const struct cpumask *mask, - void (*func)(void *info), void *info, int wait) + smp_call_func_t func, void *info, int wait) { unsigned int cpu; const struct cpumask *nodemask; @@ -416,7 +416,7 @@ void __smp_call_function_single(int cpu, struct call_single_data *data, * must be disabled when calling this function. */ void smp_call_function_many(const struct cpumask *mask, - void (*func)(void *), void *info, bool wait) + smp_call_func_t func, void *info, bool wait) { struct call_function_data *data; unsigned long flags; @@ -500,7 +500,7 @@ EXPORT_SYMBOL(smp_call_function_many); * You must not call this function with disabled interrupts or from a * hardware interrupt handler or from a bottom half handler. */ -int smp_call_function(void (*func)(void *), void *info, int wait) +int smp_call_function(smp_call_func_t func, void *info, int wait) { preempt_disable(); smp_call_function_many(cpu_online_mask, func, info, wait); diff --git a/mm/maccess.c b/mm/maccess.c index 4e348dbaecd7..e2b6f5634e0d 100644 --- a/mm/maccess.c +++ b/mm/maccess.c @@ -1,9 +1,9 @@ /* * Access kernel memory without faulting. */ -#include #include #include +#include /** * probe_kernel_read(): safely attempt to read from a location