From: Adam Kropelin <akropel1@rochester.rr.com>
Date: Sun, 29 Jul 2007 15:03:29 +0000 (-0400)
Subject: usb-serial: Fix edgeport regression on non-EPiC devices
X-Git-Tag: v2.6.23-rc2~151^2~1
X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=commitdiff_plain;h=bc71e479cdb2caab9b4473f7ad508c3fcb142486

usb-serial: Fix edgeport regression on non-EPiC devices

Fix serious regression on non-EPiC edgeport usb-serial devices. Baud
rate and MCR/LCR registers are not being written on these models due
to apparent copy-n-paste errors introduced with EPiC support.

Failure reported by Nick Pasich <Nick@NickAndBarb.net>.

Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---

diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index dd42f57089ff..2ecb1d2a034d 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2366,9 +2366,8 @@ static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRa
 	int status;
 	unsigned char number = edge_port->port->number - edge_port->port->serial->minor;
 
-	if ((!edge_serial->is_epic) ||
-	    ((edge_serial->is_epic) &&
-	     (!edge_serial->epic_descriptor.Supports.IOSPSetBaudRate))) {
+	if (edge_serial->is_epic &&
+	    !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) {
 		dbg("SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d",
 		    edge_port->port->number, baudRate);
 		return 0;
@@ -2461,18 +2460,16 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r
 
 	dbg("%s - write to %s register 0x%02x", (regNum == MCR) ? "MCR" : "LCR", __FUNCTION__, regValue);
 
-	if ((!edge_serial->is_epic) ||
-	    ((edge_serial->is_epic) &&
-	     (!edge_serial->epic_descriptor.Supports.IOSPWriteMCR) &&
-	     (regNum == MCR))) {
+	if (edge_serial->is_epic &&
+	    !edge_serial->epic_descriptor.Supports.IOSPWriteMCR &&
+	    regNum == MCR) {
 		dbg("SendCmdWriteUartReg - Not writing to MCR Register");
 		return 0;
 	}
 
-	if ((!edge_serial->is_epic) ||
-	    ((edge_serial->is_epic) &&
-	     (!edge_serial->epic_descriptor.Supports.IOSPWriteLCR) &&
-	     (regNum == LCR))) {
+	if (edge_serial->is_epic &&
+	    !edge_serial->epic_descriptor.Supports.IOSPWriteLCR &&
+	    regNum == LCR) {
 		dbg ("SendCmdWriteUartReg - Not writing to LCR Register");
 		return 0;
 	}