From: Alan Cox Date: Mon, 10 Mar 2008 21:59:28 +0000 (+0000) Subject: USB: cypress_m8: Speed handling X-Git-Tag: v2.6.26-rc1~1061^2~70 X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=commitdiff_plain;h=8873aaa6e574d85c020a1c472d6d159cd1ec8aef USB: cypress_m8: Speed handling The recent changes to this driver cleaned it up a lot, follow that up by sorting the speed side of things out as well Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 4bf45c711b9d..36f8ef079479 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -147,7 +147,6 @@ struct cypress_private { enum packet_format pkt_fmt; /* format to use for packet send / receive */ int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */ int baud_rate; /* stores current baud rate in integer form */ - int cbr_mask; /* stores current baud rate in masked form */ int isthrottled; /* if throttled, discard reads */ wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */ char prev_status, diff_status; /* used for TIOCMIWAIT */ @@ -183,9 +182,6 @@ static void cypress_unthrottle (struct usb_serial_port *port); static void cypress_set_dead (struct usb_serial_port *port); static void cypress_read_int_callback (struct urb *urb); static void cypress_write_int_callback (struct urb *urb); -/* baud helper functions */ -static int mask_to_rate (unsigned mask); -static unsigned rate_to_mask (int rate); /* write buffer functions */ static struct cypress_buf *cypress_buf_alloc(unsigned int size); static void cypress_buf_free(struct cypress_buf *cb); @@ -291,9 +287,8 @@ static struct usb_serial_driver cypress_ca42v2_device = { *****************************************************************************/ -static int analyze_baud_rate(struct usb_serial_port *port, unsigned baud_mask) +static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) { - int new_rate; struct cypress_private *priv; priv = usb_get_serial_port_data(port); @@ -306,12 +301,6 @@ static int analyze_baud_rate(struct usb_serial_port *port, unsigned baud_mask) * The Cypress HID->COM device will work successfully up to * 115200bps (but the actual throughput is around 3kBps). */ - new_rate = mask_to_rate(baud_mask); - if (new_rate < 0) { - dbg("%s - failed setting baud rate, untranslatable speed", - __func__); - return -1; - } if (port->serial->dev->speed == USB_SPEED_LOW) { /* * Mike Isely 2-Feb-2008: The @@ -345,7 +334,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, unsigned baud_mask) /* This function can either set or retrieve the current serial line settings */ -static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_mask, int data_bits, int stop_bits, +static int cypress_serial_control (struct usb_serial_port *port, speed_t baud_rate, int data_bits, int stop_bits, int parity_enable, int parity_type, int reset, int cypress_request_type) { int new_baudrate = 0, retval = 0, tries = 0; @@ -363,9 +352,13 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m switch(cypress_request_type) { case CYPRESS_SET_CONFIG: new_baudrate = priv->baud_rate; - if (baud_mask != priv->cbr_mask) { + /* 0 means 'Hang up' so doesn't change the true bit rate */ + if (baud_rate == 0) + new_baudrate = priv->baud_rate; + /* Change of speed ? */ + else if (baud_rate != priv->baud_rate) { dbg("%s - baud rate is changing", __FUNCTION__); - retval = analyze_baud_rate(port, baud_mask); + retval = analyze_baud_rate(port, baud_rate); if (retval >= 0) { new_baudrate = retval; dbg("%s - New baud rate set to %d", @@ -410,9 +403,12 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m } else { spin_lock_irqsave(&priv->lock, flags); priv->baud_rate = new_baudrate; - priv->cbr_mask = baud_mask; priv->current_config = feature_buffer[4]; spin_unlock_irqrestore(&priv->lock, flags); + /* If we asked for a speed change encode it */ + if (baud_rate) + tty_encode_baud_rate(port->tty, + new_baudrate, new_baudrate); } break; case CYPRESS_GET_CONFIG: @@ -450,9 +446,6 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m /* store the config in one byte, and later use bit masks to check values */ priv->current_config = feature_buffer[4]; priv->baud_rate = *((u_int32_t *)feature_buffer); - - if ( (priv->cbr_mask = rate_to_mask(priv->baud_rate)) == 0x40) - dbg("%s - failed setting the baud mask (not defined)", __FUNCTION__); spin_unlock_irqrestore(&priv->lock, flags); } } @@ -482,51 +475,6 @@ static void cypress_set_dead(struct usb_serial_port *port) } -/* given a baud mask, it will return integer baud on success */ -static int mask_to_rate (unsigned mask) -{ - int rate; - - switch (mask) { - case B0: rate = 0; break; - case B300: rate = 300; break; - case B600: rate = 600; break; - case B1200: rate = 1200; break; - case B2400: rate = 2400; break; - case B4800: rate = 4800; break; - case B9600: rate = 9600; break; - case B19200: rate = 19200; break; - case B38400: rate = 38400; break; - case B57600: rate = 57600; break; - case B115200: rate = 115200; break; - default: rate = -1; - } - - return rate; -} - - -static unsigned rate_to_mask (int rate) -{ - unsigned mask; - - switch (rate) { - case 0: mask = B0; break; - case 300: mask = B300; break; - case 600: mask = B600; break; - case 1200: mask = B1200; break; - case 2400: mask = B2400; break; - case 4800: mask = B4800; break; - case 9600: mask = B9600; break; - case 19200: mask = B19200; break; - case 38400: mask = B38400; break; - case 57600: mask = B57600; break; - case 115200: mask = B115200; break; - default: mask = 0x40; - } - - return mask; -} /***************************************************************************** * Cypress serial driver functions *****************************************************************************/ @@ -558,7 +506,6 @@ static int generic_startup (struct usb_serial *serial) priv->line_control = 0; priv->termios_initialized = 0; priv->rx_flags = 0; - priv->cbr_mask = B300; /* Default packet format setting is determined by packet size. Anything with a size larger then 9 must have a separate count field since the 3 bit count field is otherwise too @@ -1004,9 +951,9 @@ static int cypress_tiocmset (struct usb_serial_port *port, struct file *file, priv->line_control &= ~CONTROL_RTS; if (clear & TIOCM_DTR) priv->line_control &= ~CONTROL_DTR; + priv->cmd_ctrl = 1; spin_unlock_irqrestore(&priv->lock, flags); - priv->cmd_ctrl = 1; return cypress_write(port, NULL, 0); } @@ -1018,20 +965,6 @@ static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsi dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd); switch (cmd) { - case TIOCGSERIAL: - if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct ktermios))) { - return -EFAULT; - } - return (0); - break; - case TIOCSSERIAL: - if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct ktermios))) { - return -EFAULT; - } - /* here we need to call cypress_set_termios to invoke the new settings */ - cypress_set_termios(port, &priv->tmp_termios); - return (0); - break; /* This code comes from drivers/char/serial.c and ftdi_sio.c */ case TIOCMIWAIT: while (priv != NULL) { @@ -1079,7 +1012,7 @@ static void cypress_set_termios (struct usb_serial_port *port, struct cypress_private *priv = usb_get_serial_port_data(port); struct tty_struct *tty; int data_bits, stop_bits, parity_type, parity_enable; - unsigned cflag, iflag, baud_mask; + unsigned cflag, iflag; unsigned long flags; __u8 oldlines; int linechange = 0; @@ -1087,10 +1020,6 @@ static void cypress_set_termios (struct usb_serial_port *port, dbg("%s - port %d", __FUNCTION__, port->number); tty = port->tty; - if ((!tty) || (!tty->termios)) { - dbg("%s - no tty structures", __FUNCTION__); - return; - } spin_lock_irqsave(&priv->lock, flags); if (!priv->termios_initialized) { @@ -1098,40 +1027,37 @@ static void cypress_set_termios (struct usb_serial_port *port, *(tty->termios) = tty_std_termios; tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL | CLOCAL; + tty->termios->c_ispeed = 4800; + tty->termios->c_ospeed = 4800; } else if (priv->chiptype == CT_CYPHIDCOM) { *(tty->termios) = tty_std_termios; tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + tty->termios->c_ispeed = 9600; + tty->termios->c_ospeed = 9600; } else if (priv->chiptype == CT_CA42V2) { *(tty->termios) = tty_std_termios; tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + tty->termios->c_ispeed = 9600; + tty->termios->c_ospeed = 9600; } priv->termios_initialized = 1; } spin_unlock_irqrestore(&priv->lock, flags); + /* Unsupported features need clearing */ + tty->termios->c_cflag &= ~(CMSPAR|CRTSCTS); + cflag = tty->termios->c_cflag; iflag = tty->termios->c_iflag; /* check if there are new settings */ if (old_termios) { - if ((cflag != old_termios->c_cflag) || - (RELEVANT_IFLAG(iflag) != - RELEVANT_IFLAG(old_termios->c_iflag))) { - dbg("%s - attempting to set new termios settings", - __FUNCTION__); - /* should make a copy of this in case something goes - * wrong in the function, we can restore it */ - spin_lock_irqsave(&priv->lock, flags); - priv->tmp_termios = *(tty->termios); - spin_unlock_irqrestore(&priv->lock, flags); - } else { - dbg("%s - nothing to do, exiting", __FUNCTION__); - return; - } - } else - return; + spin_lock_irqsave(&priv->lock, flags); + priv->tmp_termios = *(tty->termios); + spin_unlock_irqrestore(&priv->lock, flags); + } /* set number of data bits, parity, stop bits */ /* when parity is disabled the parity type bit is ignored */ @@ -1173,53 +1099,16 @@ static void cypress_set_termios (struct usb_serial_port *port, if ((cflag & CBAUD) == B0) { /* drop dtr and rts */ dbg("%s - dropping the lines, baud rate 0bps", __FUNCTION__); - baud_mask = B0; priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); - } else { - baud_mask = (cflag & CBAUD); - switch(baud_mask) { - case B300: - dbg("%s - setting baud 300bps", __FUNCTION__); - break; - case B600: - dbg("%s - setting baud 600bps", __FUNCTION__); - break; - case B1200: - dbg("%s - setting baud 1200bps", __FUNCTION__); - break; - case B2400: - dbg("%s - setting baud 2400bps", __FUNCTION__); - break; - case B4800: - dbg("%s - setting baud 4800bps", __FUNCTION__); - break; - case B9600: - dbg("%s - setting baud 9600bps", __FUNCTION__); - break; - case B19200: - dbg("%s - setting baud 19200bps", __FUNCTION__); - break; - case B38400: - dbg("%s - setting baud 38400bps", __FUNCTION__); - break; - case B57600: - dbg("%s - setting baud 57600bps", __FUNCTION__); - break; - case B115200: - dbg("%s - setting baud 115200bps", __FUNCTION__); - break; - default: - dbg("%s - unknown masked baud rate", __FUNCTION__); - } + } else priv->line_control = (CONTROL_DTR | CONTROL_RTS); - } spin_unlock_irqrestore(&priv->lock, flags); dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, " "%d data_bits (+5)", __FUNCTION__, stop_bits, parity_enable, parity_type, data_bits); - cypress_serial_control(port, baud_mask, data_bits, stop_bits, + cypress_serial_control(port, tty_get_baud_rate(tty), data_bits, stop_bits, parity_enable, parity_type, 0, CYPRESS_SET_CONFIG); /* we perform a CYPRESS_GET_CONFIG so that the current settings are