From: Igor M. Liplianin Date: Tue, 25 Jan 2011 20:04:00 +0000 (-0300) Subject: [media] Initial commit to support NetUP Dual DVB-T/C CI RF card X-Git-Tag: v2.6.39-rc1~86^2~272 X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=commitdiff_plain;h=78db854757aa4110f9c6873d1529b851037a3405 [media] Initial commit to support NetUP Dual DVB-T/C CI RF card The card based on cx23885 PCI-e brige. Altera FPGA for CI, multistandard demods stv0367 from STM for QAM & OFDM, Xcieve xc5000 tuners and additional cx25840 for second analog input. Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb/frontends/stv0367.h b/drivers/media/dvb/frontends/stv0367.h index 822a8e98783f..93cc4a57eea0 100644 --- a/drivers/media/dvb/frontends/stv0367.h +++ b/drivers/media/dvb/frontends/stv0367.h @@ -4,8 +4,8 @@ * Driver for ST STV0367 DVB-T & DVB-C demodulator IC. * * Copyright (C) ST Microelectronics. - * Copyright (C) 2010 NetUP Inc. - * Copyright (C) 2010 Igor M. Liplianin + * Copyright (C) 2010,2011 NetUP Inc. + * Copyright (C) 2010,2011 Igor M. Liplianin * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig index 5e5faadd678f..3b6e7f28568e 100644 --- a/drivers/media/video/cx23885/Kconfig +++ b/drivers/media/video/cx23885/Kconfig @@ -1,6 +1,7 @@ config VIDEO_CX23885 tristate "Conexant cx23885 (2388x successor) support" - depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT + depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT && SND + select SND_PCM select I2C_ALGOBIT select VIDEO_BTCX select VIDEO_TUNER diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index b298b730943c..a3fe26cf6367 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -24,10 +24,14 @@ #include #include #include +#include +#include #include "cx23885.h" #include "tuner-xc2028.h" #include "netup-init.h" +#include "altera-ci.h" +#include "xc5000.h" #include "cx23888-ir.h" static unsigned int enable_885_ir; @@ -187,7 +191,7 @@ struct cx23885_board cx23885_boards[] = { .portb = CX23885_MPEG_DVB, }, [CX23885_BOARD_NETUP_DUAL_DVBS2_CI] = { - .cimax = 1, + .ci_type = 1, .name = "NetUP Dual DVB-S2 CI", .portb = CX23885_MPEG_DVB, .portc = CX23885_MPEG_DVB, @@ -329,6 +333,19 @@ struct cx23885_board cx23885_boards[] = { CX25840_SVIDEO_CHROMA4, } }, }, + [CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF] = { + .ci_type = 2, + .name = "NetUP Dual DVB-T/C-CI RF", + .porta = CX23885_ANALOG_VIDEO, + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x64, + .input = { { + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_COMPOSITE1, + } }, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -520,6 +537,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x5654, .subdevice = 0x2390, .card = CX23885_BOARD_GOTVIEW_X5_3D_HYBRID, + }, { + .subvendor = 0x1b55, + .subdevice = 0xe2e4, + .card = CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -740,6 +761,9 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg) /* Tuner Reset Command */ bitmask = 0x02; break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + altera_ci_tuner_reset(dev, port->nr); + break; } if (bitmask) { @@ -998,6 +1022,33 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID: cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */ break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + /* GPIO-0 ~INT in + GPIO-1 TMS out + GPIO-2 ~reset chips out + GPIO-3 to GPIO-10 data/addr for CA in/out + GPIO-11 ~CS out + GPIO-12 ADDR out + GPIO-13 ~WR out + GPIO-14 ~RD out + GPIO-15 ~RDY in + GPIO-16 TCK out + GPIO-17 TDO in + GPIO-18 TDI out + */ + cx_set(GP0_IO, 0x00060000); /* GPIO-1,2 as out */ + /* GPIO-0 as INT, reset & TMS low */ + cx_clear(GP0_IO, 0x00010006); + mdelay(100);/* reset delay */ + cx_set(GP0_IO, 0x00000004); /* reset high */ + cx_write(MC417_CTL, 0x00000037);/* enable GPIO-3..18 pins */ + /* GPIO-17 is TDO in, GPIO-15 is ~RDY in, rest is out */ + cx_write(MC417_OEN, 0x00005000); + /* ~RD, ~WR high; ADDR low; ~CS high */ + cx_write(MC417_RWD, 0x00000d00); + /* enable irq */ + cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/ + break; } } @@ -1113,6 +1164,31 @@ void cx23885_ir_fini(struct cx23885_dev *dev) } } +int netup_jtag_io(void *device, int tms, int tdi, int read_tdo) +{ + int data; + int tdo = 0; + struct cx23885_dev *dev = (struct cx23885_dev *)device; + /*TMS*/ + data = ((cx_read(GP0_IO)) & (~0x00000002)); + data |= (tms ? 0x00020002 : 0x00020000); + cx_write(GP0_IO, data); + + /*TDI*/ + data = ((cx_read(MC417_RWD)) & (~0x0000a000)); + data |= (tdi ? 0x00008000 : 0); + cx_write(MC417_RWD, data); + if (read_tdo) + tdo = (data & 0x00004000) ? 1 : 0; /*TDO*/ + + cx_write(MC417_RWD, data | 0x00002000); + udelay(1); + /*TCK*/ + cx_write(MC417_RWD, data); + + return tdo; +} + void cx23885_ir_pci_int_enable(struct cx23885_dev *dev) { switch (dev->board) { @@ -1212,6 +1288,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; @@ -1271,6 +1348,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: case CX23885_BOARD_COMPRO_VIDEOMATE_E800: case CX23885_BOARD_HAUPPAUGE_HVR1850: case CX23885_BOARD_MYGICA_X8506: @@ -1293,6 +1371,29 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: netup_initialize(dev); break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: { + int ret; + const struct firmware *fw; + const char *filename = "dvb-netup-altera-01.fw"; + char *action = "configure"; + struct altera_config netup_config = { + .dev = dev, + .action = action, + .jtag_io = netup_jtag_io, + }; + + netup_initialize(dev); + + ret = request_firmware(&fw, filename, &dev->pci->dev); + if (ret != 0) + printk(KERN_ERR "did not find the firmware file. (%s) " + "Please see linux/Documentation/dvb/ for more details " + "on firmware-problems.", filename); + else + altera_init(&netup_config, fw); + + break; + } } } diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index 359882419b7f..9ad4c9c577e0 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -29,9 +29,11 @@ #include #include #include +#include #include "cx23885.h" #include "cimax2.h" +#include "altera-ci.h" #include "cx23888-ir.h" #include "cx23885-ir.h" #include "cx23885-av.h" @@ -902,8 +904,6 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) dev->pci_bus = dev->pci->bus->number; dev->pci_slot = PCI_SLOT(dev->pci->devfn); cx23885_irq_add(dev, 0x001f00); - if (cx23885_boards[dev->board].cimax > 0) - cx23885_irq_add(dev, 0x01800000); /* for CiMaxes */ /* External Master 1 Bus */ dev->i2c_bus[0].nr = 0; @@ -1822,14 +1822,13 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id) PCI_MSK_IR); } - if (cx23885_boards[dev->board].cimax > 0 && - ((pci_status & PCI_MSK_GPIO0) || - (pci_status & PCI_MSK_GPIO1))) { + if (cx23885_boards[dev->board].ci_type == 1 && + (pci_status & (PCI_MSK_GPIO1 | PCI_MSK_GPIO0))) + handled += netup_ci_slot_status(dev, pci_status); - if (cx23885_boards[dev->board].cimax > 0) - handled += netup_ci_slot_status(dev, pci_status); - - } + if (cx23885_boards[dev->board].ci_type == 2 && + (pci_status & PCI_MSK_GPIO0)) + handled += altera_ci_irq(dev); if (ts1_status) { if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) @@ -2064,7 +2063,10 @@ static int __devinit cx23885_initdev(struct pci_dev *pci_dev, switch (dev->board) { case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: - cx23885_irq_add_enable(dev, 0x01800000); /* for NetUP */ + cx23885_irq_add_enable(dev, PCI_MSK_GPIO1 | PCI_MSK_GPIO0); + break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + cx23885_irq_add_enable(dev, PCI_MSK_GPIO0); break; } diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 5958cb882e93..cf36b9b4794e 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -58,6 +58,8 @@ #include "atbm8830.h" #include "ds3000.h" #include "cx23885-f300.h" +#include "altera-ci.h" +#include "stv0367.h" static unsigned int debug; @@ -108,6 +110,22 @@ static void dvb_buf_release(struct videobuf_queue *q, cx23885_free_buffer(q, (struct cx23885_buffer *)vb); } +static void cx23885_dvb_gate_ctrl(struct cx23885_tsport *port, int open) +{ + struct videobuf_dvb_frontends *f; + struct videobuf_dvb_frontend *fe; + + f = &port->frontends; + + if (f->gate <= 1) /* undefined or fe0 */ + fe = videobuf_dvb_get_frontend(f, 1); + else + fe = videobuf_dvb_get_frontend(f, f->gate); + + if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl) + fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open); +} + static struct videobuf_queue_ops dvb_qops = { .buf_setup = dvb_buf_setup, .buf_prepare = dvb_buf_prepare, @@ -570,12 +588,84 @@ static struct max2165_config mygic_x8558pro_max2165_cfg2 = { .i2c_address = 0x60, .osc_clk = 20 }; +static struct stv0367_config netup_stv0367_config[] = { + { + .demod_address = 0x1c, + .xtal = 27000000, + .if_khz = 4500, + .if_iq_mode = 0, + .ts_mode = 1, + .clk_pol = 0, + }, { + .demod_address = 0x1d, + .xtal = 27000000, + .if_khz = 4500, + .if_iq_mode = 0, + .ts_mode = 1, + .clk_pol = 0, + }, +}; + +static struct xc5000_config netup_xc5000_config[] = { + { + .i2c_address = 0x61, + .if_khz = 4500, + }, { + .i2c_address = 0x64, + .if_khz = 4500, + }, +}; + +int netup_altera_fpga_rw(void *device, int flag, int data, int read) +{ + struct cx23885_dev *dev = (struct cx23885_dev *)device; + unsigned long timeout = jiffies + msecs_to_jiffies(1); + int mem = 0; + + cx_set(MC417_RWD, ALT_RD | ALT_WR | ALT_CS); + if (read) + cx_set(MC417_OEN, ALT_DATA); + else { + cx_clear(MC417_OEN, ALT_DATA);/* D0-D7 out */ + mem = cx_read(MC417_RWD); + mem &= ~ALT_DATA; + mem |= (data & ALT_DATA); + cx_write(MC417_RWD, mem); + } + + if (flag) + cx_set(MC417_RWD, ALT_AD_RG);/* ADDR */ + else + cx_clear(MC417_RWD, ALT_AD_RG);/* VAL */ + + cx_clear(MC417_RWD, ALT_CS);/* ~CS */ + if (read) + cx_clear(MC417_RWD, ALT_RD); + else + cx_clear(MC417_RWD, ALT_WR); + + for (;;) { + mem = cx_read(MC417_RWD); + if ((mem & ALT_RDY) == 0) + break; + if (time_after(jiffies, timeout)) + break; + udelay(1); + } + + cx_set(MC417_RWD, ALT_RD | ALT_WR | ALT_CS); + if (read) + return mem & ALT_DATA; + + return 0; +}; static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL; - struct videobuf_dvb_frontend *fe0; + struct videobuf_dvb_frontend *fe0, *fe1 = NULL; + int mfe_shared = 0; /* bus not shared by default */ int ret; /* Get the first frontend */ @@ -586,6 +676,12 @@ static int dvb_register(struct cx23885_tsport *port) /* init struct videobuf_dvb */ fe0->dvb.name = dev->name; + /* multi-frontend gate control is undefined or defaults to fe0 */ + port->frontends.gate = 0; + + /* Sets the gate control callback to be used by i2c command calls */ + port->gate_ctrl = cx23885_dvb_gate_ctrl; + /* init frontend */ switch (dev->board) { case CX23885_BOARD_HAUPPAUGE_HVR1250: @@ -966,20 +1062,61 @@ static int dvb_register(struct cx23885_tsport *port) break; } break; - + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + i2c_bus = &dev->i2c_bus[0]; + mfe_shared = 1;/* MFE */ + port->frontends.gate = 0;/* not clear for me yet */ + /* ports B, C */ + /* MFE frontend 1 DVB-T */ + fe0->dvb.frontend = dvb_attach(stv0367ter_attach, + &netup_stv0367_config[port->nr - 1], + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + if (NULL == dvb_attach(xc5000_attach, + fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &netup_xc5000_config[port->nr - 1])) + goto frontend_detach; + /* MFE frontend 2 */ + fe1 = videobuf_dvb_get_frontend(&port->frontends, 2); + if (fe1 == NULL) + goto frontend_detach; + /* DVB-C init */ + fe1->dvb.frontend = dvb_attach(stv0367cab_attach, + &netup_stv0367_config[port->nr - 1], + &i2c_bus->i2c_adap); + if (fe1->dvb.frontend != NULL) { + fe1->dvb.frontend->id = 1; + if (NULL == dvb_attach(xc5000_attach, + fe1->dvb.frontend, + &i2c_bus->i2c_adap, + &netup_xc5000_config[port->nr - 1])) + goto frontend_detach; + } + break; default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " " isn't supported yet\n", dev->name); break; } - if (NULL == fe0->dvb.frontend) { + + if ((NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend)) { printk(KERN_ERR "%s: frontend initialization failed\n", - dev->name); - return -1; + dev->name); + goto frontend_detach; } + /* define general-purpose callback pointer */ fe0->dvb.frontend->callback = cx23885_tuner_callback; + if (fe1) + fe1->dvb.frontend->callback = cx23885_tuner_callback; +#if 0 + /* Ensure all frontends negotiate bus access */ + fe0->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl; + if (fe1) + fe1->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl; +#endif /* Put the analog decoder in standby to keep it quiet */ call_all(dev, core, s_power, 0); @@ -989,10 +1126,10 @@ static int dvb_register(struct cx23885_tsport *port) /* register everything */ ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port, - &dev->pci->dev, adapter_nr, 0, + &dev->pci->dev, adapter_nr, mfe_shared, cx23885_dvb_fe_ioctl_override); if (ret) - return ret; + goto frontend_detach; /* init CI & MAC */ switch (dev->board) { @@ -1008,6 +1145,17 @@ static int dvb_register(struct cx23885_tsport *port) netup_ci_init(port); break; } + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: { + struct altera_ci_config netup_ci_cfg = { + .dev = dev,/* magic number to identify*/ + .adapter = &port->frontends.adapter,/* for CI */ + .demux = &fe0->dvb.demux,/* for hw pid filter */ + .fpga_rw = netup_altera_fpga_rw, + }; + + altera_ci_init(&netup_ci_cfg, port->nr); + break; + } case CX23885_BOARD_TEVII_S470: { u8 eeprom[256]; /* 24C02 i2c eeprom */ @@ -1024,6 +1172,11 @@ static int dvb_register(struct cx23885_tsport *port) } return ret; + +frontend_detach: + port->gate_ctrl = NULL; + videobuf_dvb_dealloc_frontends(&port->frontends); + return -EINVAL; } int cx23885_dvb_register(struct cx23885_tsport *port) @@ -1100,8 +1253,13 @@ int cx23885_dvb_unregister(struct cx23885_tsport *port) case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: netup_ci_exit(port); break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + altera_ci_release(port->dev, port->nr); + break; } + port->gate_ctrl = NULL; + return 0; } diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 62e41ab65810..8b77feabc594 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -85,6 +85,7 @@ #define CX23885_BOARD_MYGICA_X8558PRO 27 #define CX23885_BOARD_LEADTEK_WINFAST_PXTV1200 28 #define CX23885_BOARD_GOTVIEW_X5_3D_HYBRID 29 +#define CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF 30 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 @@ -220,7 +221,7 @@ struct cx23885_board { */ u32 clk_freq; struct cx23885_input input[MAX_CX23885_INPUT]; - int cimax; /* for NetUP */ + int ci_type; /* for NetUP */ }; struct cx23885_subid { @@ -303,6 +304,7 @@ struct cx23885_tsport { /* Allow a single tsport to have multiple frontends */ u32 num_frontends; + void (*gate_ctrl)(struct cx23885_tsport *port, int open); void *port_priv; };