From: Linus Torvalds Date: Sat, 12 Nov 2011 01:37:17 +0000 (-0200) Subject: Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs X-Git-Tag: v3.2-rc2~26 X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=commitdiff_plain;h=53e3ccfd153f0e71352b34a930e231ac1ae07d5e;hp=810627d9a6d0e8820c798001875bc4e1b7754ebf Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs * 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: fix force shutdown handling in xfs_end_io xfs: constify xfs_item_ops xfs: Fix possible memory corruption in xfs_readlink --- diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index c27915893974..196b8b9dba11 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -32,7 +32,7 @@ The Linux DRM layer contains code intended to support the needs of complex graphics devices, usually containing programmable pipelines well suited to 3D graphics acceleration. Graphics - drivers in the kernel can make use of DRM functions to make + drivers in the kernel may make use of DRM functions to make tasks like memory management, interrupt handling and DMA easier, and provide a uniform interface to applications. @@ -57,10 +57,10 @@ existing drivers. - First, we'll go over some typical driver initialization + First, we go over some typical driver initialization requirements, like setting up command buffers, creating an initial output configuration, and initializing core services. - Subsequent sections will cover core internals in more detail, + Subsequent sections cover core internals in more detail, providing implementation notes and examples. @@ -74,7 +74,7 @@ The core of every DRM driver is struct drm_driver. Drivers - will typically statically initialize a drm_driver structure, + typically statically initialize a drm_driver structure, then pass it to drm_init() at load time. @@ -88,8 +88,8 @@ static struct drm_driver driver = { - /* don't use mtrr's here, the Xserver or user space app should - * deal with them for intel hardware. + /* Don't use MTRRs here; the Xserver or userspace app should + * deal with them for Intel hardware. */ .driver_features = DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | @@ -154,8 +154,8 @@ In the example above, taken from the i915 DRM driver, the driver - sets several flags indicating what core features it supports. - We'll go over the individual callbacks in later sections. Since + sets several flags indicating what core features it supports; + we go over the individual callbacks in later sections. Since flags indicate which features your driver supports to the DRM core, you need to set most of them prior to calling drm_init(). Some, like DRIVER_MODESET can be set later based on user supplied parameters, @@ -203,8 +203,8 @@ DRIVER_HAVE_IRQDRIVER_IRQ_SHARED - DRIVER_HAVE_IRQ indicates whether the driver has a IRQ - handler, DRIVER_IRQ_SHARED indicates whether the device & + DRIVER_HAVE_IRQ indicates whether the driver has an IRQ + handler. DRIVER_IRQ_SHARED indicates whether the device & handler support shared IRQs (note that this is required of PCI drivers). @@ -214,8 +214,8 @@ DRIVER_DMA_QUEUE - If the driver queues DMA requests and completes them - asynchronously, this flag should be set. Deprecated. + Should be set if the driver queues DMA requests and completes them + asynchronously. Deprecated. @@ -238,7 +238,7 @@ In this specific case, the driver requires AGP and supports - IRQs. DMA, as we'll see, is handled by device specific ioctls + IRQs. DMA, as discussed later, is handled by device-specific ioctls in this case. It also supports the kernel mode setting APIs, though unlike in the actual i915 driver source, this example unconditionally exports KMS capability. @@ -269,36 +269,34 @@ initial output configuration. - Note that the tasks performed at driver load time must not - conflict with DRM client requirements. For instance, if user + If compatibility is a concern (e.g. with drivers converted over + to the new interfaces from the old ones), care must be taken to + prevent device initialization and control that is incompatible with + currently active userspace drivers. For instance, if user level mode setting drivers are in use, it would be problematic to perform output discovery & configuration at load time. - Likewise, if pre-memory management aware user level drivers are + Likewise, if user-level drivers unaware of memory management are in use, memory management and command buffer setup may need to - be omitted. These requirements are driver specific, and care + be omitted. These requirements are driver-specific, and care needs to be taken to keep both old and new applications and libraries working. The i915 driver supports the "modeset" module parameter to control whether advanced features are - enabled at load time or in legacy fashion. If compatibility is - a concern (e.g. with drivers converted over to the new interfaces - from the old ones), care must be taken to prevent incompatible - device initialization and control with the currently active - userspace drivers. + enabled at load time or in legacy fashion. Driver private & performance counters The driver private hangs off the main drm_device structure and - can be used for tracking various device specific bits of + can be used for tracking various device-specific bits of information, like register offsets, command buffer status, register state for suspend/resume, etc. At load time, a - driver can simply allocate one and set drm_device.dev_priv - appropriately; at unload the driver can free it and set - drm_device.dev_priv to NULL. + driver may simply allocate one and set drm_device.dev_priv + appropriately; it should be freed and drm_device.dev_priv set + to NULL when the driver is unloaded. - The DRM supports several counters which can be used for rough + The DRM supports several counters which may be used for rough performance characterization. Note that the DRM stat counter system is not often used by applications, and supporting additional counters is completely optional. @@ -307,15 +305,15 @@ These interfaces are deprecated and should not be used. If performance monitoring is desired, the developer should investigate and potentially enhance the kernel perf and tracing infrastructure to export - GPU related performance information to performance monitoring - tools and applications. + GPU related performance information for consumption by performance + monitoring tools and applications. Configuring the device - Obviously, device configuration will be device specific. + Obviously, device configuration is device-specific. However, there are several common operations: finding a device's PCI resources, mapping them, and potentially setting up an IRQ handler. @@ -323,10 +321,10 @@ Finding & mapping resources is fairly straightforward. The DRM wrapper functions, drm_get_resource_start() and - drm_get_resource_len() can be used to find BARs on the given + drm_get_resource_len(), may be used to find BARs on the given drm_device struct. Once those values have been retrieved, the driver load function can call drm_addmap() to create a new - mapping for the BAR in question. Note you'll probably want a + mapping for the BAR in question. Note that you probably want a drm_local_map_t in your driver private structure to track any mappings you create. @@ -335,20 +333,20 @@ if compatibility with other operating systems isn't a concern (DRM drivers can run under various BSD variants and OpenSolaris), - native Linux calls can be used for the above, e.g. pci_resource_* + native Linux calls may be used for the above, e.g. pci_resource_* and iomap*/iounmap. See the Linux device driver book for more info. - Once you have a register map, you can use the DRM_READn() and + Once you have a register map, you may use the DRM_READn() and DRM_WRITEn() macros to access the registers on your device, or - use driver specific versions to offset into your MMIO space - relative to a driver specific base pointer (see I915_READ for - example). + use driver-specific versions to offset into your MMIO space + relative to a driver-specific base pointer (see I915_READ for + an example). If your device supports interrupt generation, you may want to - setup an interrupt handler at driver load time as well. This + set up an interrupt handler when the driver is loaded. This is done using the drm_irq_install() function. If your device supports vertical blank interrupts, it should call drm_vblank_init() to initialize the core vblank handling code before @@ -357,7 +355,7 @@ - Once your interrupt handler is registered (it'll use your + Once your interrupt handler is registered (it uses your drm_driver.irq_handler as the actual interrupt handling function), you can safely enable interrupts on your device, assuming any other state your interrupt handler uses is also @@ -371,10 +369,10 @@ using the pci_map_rom() call, a convenience function that takes care of mapping the actual ROM, whether it has been shadowed into memory (typically at address 0xc0000) or exists - on the PCI device in the ROM BAR. Note that once you've - mapped the ROM and extracted any necessary information, be - sure to unmap it; on many devices the ROM address decoder is - shared with other BARs, so leaving it mapped can cause + on the PCI device in the ROM BAR. Note that after the ROM + has been mapped and any necessary information has been extracted, + it should be unmapped; on many devices, the ROM address decoder is + shared with other BARs, so leaving it mapped could cause undesired behavior like hangs or memory corruption. @@ -389,9 +387,9 @@ should support a memory manager. - If your driver supports memory management (it should!), you'll + If your driver supports memory management (it should!), you need to set that up at load time as well. How you initialize - it depends on which memory manager you're using, TTM or GEM. + it depends on which memory manager you're using: TTM or GEM. TTM initialization @@ -401,7 +399,7 @@ and devices with dedicated video RAM (VRAM), i.e. most discrete graphics devices. If your device has dedicated RAM, supporting TTM is desirable. TTM also integrates tightly with your - driver specific buffer execution function. See the radeon + driver-specific buffer execution function. See the radeon driver for examples. @@ -429,21 +427,21 @@ created by the memory manager at runtime. Your global TTM should have a type of TTM_GLOBAL_TTM_MEM. The size field for the global object should be sizeof(struct ttm_mem_global), and the init and - release hooks should point at your driver specific init and - release routines, which will probably eventually call - ttm_mem_global_init and ttm_mem_global_release respectively. + release hooks should point at your driver-specific init and + release routines, which probably eventually call + ttm_mem_global_init and ttm_mem_global_release, respectively. Once your global TTM accounting structure is set up and initialized - (done by calling ttm_global_item_ref on the global object you - just created), you'll need to create a buffer object TTM to + by calling ttm_global_item_ref() on it, + you need to create a buffer object TTM to provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, - driver specific init and release functions can be provided, - likely eventually calling ttm_bo_global_init and - ttm_bo_global_release, respectively. Also like the previous - object, ttm_global_item_ref is used to create an initial reference + driver-specific init and release functions may be provided, + likely eventually calling ttm_bo_global_init() and + ttm_bo_global_release(), respectively. Also, like the previous + object, ttm_global_item_ref() is used to create an initial reference count for the TTM, which will call your initialization function. @@ -453,27 +451,26 @@ GEM is an alternative to TTM, designed specifically for UMA devices. It has simpler initialization and execution requirements than TTM, but has no VRAM management capability. Core GEM - initialization is comprised of a basic drm_mm_init call to create + is initialized by calling drm_mm_init() to create a GTT DRM MM object, which provides an address space pool for - object allocation. In a KMS configuration, the driver will - need to allocate and initialize a command ring buffer following - basic GEM initialization. Most UMA devices have a so-called + object allocation. In a KMS configuration, the driver + needs to allocate and initialize a command ring buffer following + core GEM initialization. A UMA device usually has what is called a "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the - device. This space is not typically managed by GEM, and must + device. This space is not typically managed by GEM, and it must be initialized separately into its own DRM MM object. - Initialization will be driver specific, and will depend on - the architecture of the device. In the case of Intel + Initialization is driver-specific. In the case of Intel integrated graphics chips like 965GM, GEM initialization can be done by calling the internal GEM init function, i915_gem_do_init(). Since the 965GM is a UMA device - (i.e. it doesn't have dedicated VRAM), GEM will manage + (i.e. it doesn't have dedicated VRAM), GEM manages making regular RAM available for GPU operations. Memory set aside by the BIOS (called "stolen" memory by the i915 - driver) will be managed by the DRM memrange allocator; the - rest of the aperture will be managed by GEM. + driver) is managed by the DRM memrange allocator; the + rest of the aperture is managed by GEM. /* Basic memrange allocator for stolen space (aka vram) */ drm_memrange_init(&dev_priv->vram, 0, prealloc_size); @@ -483,7 +480,7 @@ - Once the memory manager has been set up, we can allocate the + Once the memory manager has been set up, we may allocate the command buffer. In the i915 case, this is also done with a GEM function, i915_gem_init_ringbuffer(). @@ -493,16 +490,25 @@ Output configuration - The final initialization task is output configuration. This involves - finding and initializing the CRTCs, encoders and connectors - for your device, creating an initial configuration and - registering a framebuffer console driver. + The final initialization task is output configuration. This involves: + + + Finding and initializing the CRTCs, encoders, and connectors + for the device. + + + Creating an initial configuration. + + + Registering a framebuffer console driver. + + Output discovery and initialization - Several core functions exist to create CRTCs, encoders and - connectors, namely drm_crtc_init(), drm_connector_init() and + Several core functions exist to create CRTCs, encoders, and + connectors, namely: drm_crtc_init(), drm_connector_init(), and drm_encoder_init(), along with several "helper" functions to perform common tasks. @@ -555,10 +561,10 @@ void intel_crt_init(struct drm_device *dev) In the example above (again, taken from the i915 driver), a - CRT connector and encoder combination is created. A device - specific i2c bus is also created, for fetching EDID data and + CRT connector and encoder combination is created. A device-specific + i2c bus is also created for fetching EDID data and performing monitor detection. Once the process is complete, - the new connector is registered with sysfs, to make its + the new connector is registered with sysfs to make its properties available to applications. @@ -567,12 +573,12 @@ void intel_crt_init(struct drm_device *dev) Since many PC-class graphics devices have similar display output designs, the DRM provides a set of helper functions to make output management easier. The core helper routines handle - encoder re-routing and disabling of unused functions following - mode set. Using the helpers is optional, but recommended for + encoder re-routing and the disabling of unused functions following + mode setting. Using the helpers is optional, but recommended for devices with PC-style architectures (i.e. a set of display planes for feeding pixels to encoders which are in turn routed to connectors). Devices with more complex requirements needing - finer grained management can opt to use the core callbacks + finer grained management may opt to use the core callbacks directly. @@ -580,17 +586,25 @@ void intel_crt_init(struct drm_device *dev) - For each encoder, CRTC and connector, several functions must - be provided, depending on the object type. Encoder objects - need to provide a DPMS (basically on/off) function, mode fixup - (for converting requested modes into native hardware timings), - and prepare, set and commit functions for use by the core DRM - helper functions. Connector helpers need to provide mode fetch and - validity functions as well as an encoder matching function for - returning an ideal encoder for a given connector. The core - connector functions include a DPMS callback, (deprecated) - save/restore routines, detection, mode probing, property handling, - and cleanup functions. + Each encoder object needs to provide: + + + A DPMS (basically on/off) function. + + + A mode-fixup function (for converting requested modes into + native hardware timings). + + + Functions (prepare, set, and commit) for use by the core DRM + helper functions. + + + Connector helpers need to provide functions (mode-fetch, validity, + and encoder-matching) for returning an ideal encoder for a given + connector. The core connector functions include a DPMS callback, + save/restore routines (deprecated), detection, mode probing, + property handling, and cleanup functions. @@ -605,22 +619,33 @@ void intel_crt_init(struct drm_device *dev) VBlank event handling The DRM core exposes two vertical blank related ioctls: - DRM_IOCTL_WAIT_VBLANK and DRM_IOCTL_MODESET_CTL. + + + DRM_IOCTL_WAIT_VBLANK + + + This takes a struct drm_wait_vblank structure as its argument, + and it is used to block or request a signal when a specified + vblank event occurs. + + + + + DRM_IOCTL_MODESET_CTL + + + This should be called by application level drivers before and + after mode setting, since on many devices the vertical blank + counter is reset at that time. Internally, the DRM snapshots + the last vblank count when the ioctl is called with the + _DRM_PRE_MODESET command, so that the counter won't go backwards + (which is dealt with when _DRM_POST_MODESET is used). + + + + - - DRM_IOCTL_WAIT_VBLANK takes a struct drm_wait_vblank structure - as its argument, and is used to block or request a signal when a - specified vblank event occurs. - - - DRM_IOCTL_MODESET_CTL should be called by application level - drivers before and after mode setting, since on many devices the - vertical blank counter will be reset at that time. Internally, - the DRM snapshots the last vblank count when the ioctl is called - with the _DRM_PRE_MODESET command so that the counter won't go - backwards (which is dealt with when _DRM_POST_MODESET is used). - To support the functions above, the DRM core provides several helper functions for tracking vertical blank counters, and @@ -632,24 +657,24 @@ void intel_crt_init(struct drm_device *dev) register. The enable and disable vblank callbacks should enable and disable vertical blank interrupts, respectively. In the absence of DRM clients waiting on vblank events, the core DRM - code will use the disable_vblank() function to disable - interrupts, which saves power. They'll be re-enabled again when + code uses the disable_vblank() function to disable + interrupts, which saves power. They are re-enabled again when a client calls the vblank wait ioctl above. - Devices that don't provide a count register can simply use an + A device that doesn't provide a count register may simply use an internal atomic counter incremented on every vertical blank - interrupt, and can make their enable and disable vblank - functions into no-ops. + interrupt (and then treat the enable_vblank() and disable_vblank() + callbacks as no-ops). Memory management - The memory manager lies at the heart of many DRM operations, and - is also required to support advanced client features like OpenGL - pbuffers. The DRM currently contains two memory managers, TTM + The memory manager lies at the heart of many DRM operations; it + is required to support advanced client features like OpenGL + pbuffers. The DRM currently contains two memory managers: TTM and GEM. @@ -679,41 +704,46 @@ void intel_crt_init(struct drm_device *dev) GEM-enabled drivers must provide gem_init_object() and gem_free_object() callbacks to support the core memory - allocation routines. They should also provide several driver - specific ioctls to support command execution, pinning, buffer + allocation routines. They should also provide several driver-specific + ioctls to support command execution, pinning, buffer read & write, mapping, and domain ownership transfers. - On a fundamental level, GEM involves several operations: memory - allocation and freeing, command execution, and aperture management - at command execution time. Buffer object allocation is relatively + On a fundamental level, GEM involves several operations: + + Memory allocation and freeing + Command execution + Aperture management at command execution time + + Buffer object allocation is relatively straightforward and largely provided by Linux's shmem layer, which provides memory to back each object. When mapped into the GTT or used in a command buffer, the backing pages for an object are flushed to memory and marked write combined so as to be coherent - with the GPU. Likewise, when the GPU finishes rendering to an object, - if the CPU accesses it, it must be made coherent with the CPU's view + with the GPU. Likewise, if the CPU accesses an object after the GPU + has finished rendering to the object, then the object must be made + coherent with the CPU's view of memory, usually involving GPU cache flushing of various kinds. - This core CPU<->GPU coherency management is provided by the GEM - set domain function, which evaluates an object's current domain and + This core CPU<->GPU coherency management is provided by a + device-specific ioctl, which evaluates an object's current domain and performs any necessary flushing or synchronization to put the object into the desired coherency domain (note that the object may be busy, - i.e. an active render target; in that case the set domain function - will block the client and wait for rendering to complete before + i.e. an active render target; in that case, setting the domain + blocks the client and waits for rendering to complete before performing any necessary flushing operations). Perhaps the most important GEM function is providing a command execution interface to clients. Client programs construct command - buffers containing references to previously allocated memory objects - and submit them to GEM. At that point, GEM will take care to bind + buffers containing references to previously allocated memory objects, + and then submit them to GEM. At that point, GEM takes care to bind all the objects into the GTT, execute the buffer, and provide necessary synchronization between clients accessing the same buffers. This often involves evicting some objects from the GTT and re-binding others (a fairly expensive operation), and providing relocation support which hides fixed GTT offsets from clients. Clients must take care not to submit command buffers that reference more objects - than can fit in the GTT or GEM will reject them and no rendering + than can fit in the GTT; otherwise, GEM will reject them and no rendering will occur. Similarly, if several objects in the buffer require fence registers to be allocated for correct rendering (e.g. 2D blits on pre-965 chips), care must be taken not to require more fence @@ -729,7 +759,7 @@ void intel_crt_init(struct drm_device *dev) Output management At the core of the DRM output management code is a set of - structures representing CRTCs, encoders and connectors. + structures representing CRTCs, encoders, and connectors. A CRTC is an abstraction representing a part of the chip that @@ -765,21 +795,19 @@ void intel_crt_init(struct drm_device *dev) Framebuffer management - In order to set a mode on a given CRTC, encoder and connector - configuration, clients need to provide a framebuffer object which - will provide a source of pixels for the CRTC to deliver to the encoder(s) - and ultimately the connector(s) in the configuration. A framebuffer - is fundamentally a driver specific memory object, made into an opaque - handle by the DRM addfb function. Once an fb has been created this - way it can be passed to the KMS mode setting routines for use in - a configuration. + Clients need to provide a framebuffer object which provides a source + of pixels for a CRTC to deliver to the encoder(s) and ultimately the + connector(s). A framebuffer is fundamentally a driver-specific memory + object, made into an opaque handle by the DRM's addfb() function. + Once a framebuffer has been created this way, it may be passed to the + KMS mode setting routines for use in a completed configuration. Command submission & fencing - This should cover a few device specific command submission + This should cover a few device-specific command submission implementations. @@ -789,7 +817,7 @@ void intel_crt_init(struct drm_device *dev) The DRM core provides some suspend/resume code, but drivers wanting full suspend/resume support should provide save() and - restore() functions. These will be called at suspend, + restore() functions. These are called at suspend, hibernate, or resume time, and should perform any state save or restore required by your device across suspend or hibernate states. @@ -812,8 +840,8 @@ void intel_crt_init(struct drm_device *dev) The DRM core exports several interfaces to applications, generally intended to be used through corresponding libdrm - wrapper functions. In addition, drivers export device specific - interfaces for use by userspace drivers & device aware + wrapper functions. In addition, drivers export device-specific + interfaces for use by userspace drivers & device-aware applications through ioctls and sysfs files. @@ -822,8 +850,8 @@ void intel_crt_init(struct drm_device *dev) management, memory management, and output management. - Cover generic ioctls and sysfs layout here. Only need high - level info, since man pages will cover the rest. + Cover generic ioctls and sysfs layout here. We only need high-level + info, since man pages should cover the rest. diff --git a/Documentation/cgroups/freezer-subsystem.txt b/Documentation/cgroups/freezer-subsystem.txt index c21d77742a07..7e62de1e59ff 100644 --- a/Documentation/cgroups/freezer-subsystem.txt +++ b/Documentation/cgroups/freezer-subsystem.txt @@ -33,9 +33,9 @@ demonstrate this problem using nested bash shells: From a second, unrelated bash shell: $ kill -SIGSTOP 16690 - $ kill -SIGCONT 16990 + $ kill -SIGCONT 16690 - + This happens because bash can observe both signals and choose how it responds to them. diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h index 6260d5deeabc..c7cb0af0eb59 100644 --- a/arch/sparc/include/asm/unistd.h +++ b/arch/sparc/include/asm/unistd.h @@ -406,8 +406,10 @@ #define __NR_syncfs 335 #define __NR_sendmmsg 336 #define __NR_setns 337 +#define __NR_process_vm_readv 338 +#define __NR_process_vm_writev 339 -#define NR_syscalls 338 +#define NR_syscalls 340 #ifdef __32bit_syscall_numbers__ /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants, diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index 09d8ec454450..63402f9e9f51 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -84,4 +84,4 @@ sys_call_table: /*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv /*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init /*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime -/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns +/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index edbec45d4688..db86b1a0e9a9 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -85,7 +85,7 @@ sys_call_table32: /*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv .word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init /*330*/ .word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime - .word sys_syncfs, compat_sys_sendmmsg, sys_setns + .word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev #endif /* CONFIG_COMPAT */ @@ -162,4 +162,4 @@ sys_call_table: /*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv .word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init /*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime - .word sys_syncfs, sys_sendmmsg, sys_setns + .word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 434a6c011675..95706fa24c73 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -669,7 +669,7 @@ struct srcu_notifier_head *opp_get_notifier(struct device *dev) struct device_opp *dev_opp = find_device_opp(dev); if (IS_ERR(dev_opp)) - return ERR_PTR(PTR_ERR(dev_opp)); /* matching type */ + return ERR_CAST(dev_opp); /* matching type */ return &dev_opp->head; } diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index cc531bb59c26..e9c2cfe45daa 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -789,8 +789,8 @@ static struct vm_operations_struct i915_gem_vm_ops = { }; static struct drm_driver driver = { - /* don't use mtrr's here, the Xserver or user space app should - * deal with them for intel hardware. + /* Don't use MTRRs here; the Xserver or userspace app should + * deal with them for Intel hardware. */ .driver_features = DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/ diff --git a/drivers/hwspinlock/u8500_hsem.c b/drivers/hwspinlock/u8500_hsem.c index 143461a95ae4..86980fe04117 100644 --- a/drivers/hwspinlock/u8500_hsem.c +++ b/drivers/hwspinlock/u8500_hsem.c @@ -21,6 +21,7 @@ * General Public License for more details. */ +#include #include #include #include @@ -108,10 +109,8 @@ static int __devinit u8500_hsem_probe(struct platform_device *pdev) return -ENODEV; io_base = ioremap(res->start, resource_size(res)); - if (!io_base) { - ret = -ENOMEM; - goto free_state; - } + if (!io_base) + return -ENOMEM; /* make sure protocol 1 is selected */ val = readl(io_base + HSEM_CTRL_REG); diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 472aedfb07cf..297e26092178 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3110,7 +3110,7 @@ static void handle_stripe(struct stripe_head *sh) struct r5dev *pdev, *qdev; clear_bit(STRIPE_HANDLE, &sh->state); - if (test_and_set_bit(STRIPE_ACTIVE, &sh->state)) { + if (test_and_set_bit_lock(STRIPE_ACTIVE, &sh->state)) { /* already being handled, ensure it gets handled * again when current action finishes */ set_bit(STRIPE_HANDLE, &sh->state); @@ -3159,10 +3159,14 @@ static void handle_stripe(struct stripe_head *sh) /* check if the array has lost more than max_degraded devices and, * if so, some requests might need to be failed. */ - if (s.failed > conf->max_degraded && s.to_read+s.to_write+s.written) - handle_failed_stripe(conf, sh, &s, disks, &s.return_bi); - if (s.failed > conf->max_degraded && s.syncing) - handle_failed_sync(conf, sh, &s); + if (s.failed > conf->max_degraded) { + sh->check_state = 0; + sh->reconstruct_state = 0; + if (s.to_read+s.to_write+s.written) + handle_failed_stripe(conf, sh, &s, disks, &s.return_bi); + if (s.syncing) + handle_failed_sync(conf, sh, &s); + } /* * might be able to return some write requests if the parity blocks @@ -3371,7 +3375,7 @@ finish: return_io(s.return_bi); - clear_bit(STRIPE_ACTIVE, &sh->state); + clear_bit_unlock(STRIPE_ACTIVE, &sh->state); } static void raid5_activate_delayed(struct r5conf *conf) diff --git a/drivers/media/video/s5k6aa.c b/drivers/media/video/s5k6aa.c index 2446736b7871..0df7f2a41814 100644 --- a/drivers/media/video/s5k6aa.c +++ b/drivers/media/video/s5k6aa.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c index 4175544b491b..ec10629a0b0b 100644 --- a/drivers/mfd/ab5500-core.c +++ b/drivers/mfd/ab5500-core.c @@ -13,6 +13,7 @@ * TODO: Event handling with irq_chip. Waiting for PRCMU fw support. */ +#include #include #include #include diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c index 6be1fe6b5f9a..43c0ebb81956 100644 --- a/drivers/mfd/ab5500-debugfs.c +++ b/drivers/mfd/ab5500-debugfs.c @@ -4,6 +4,7 @@ * Debugfs support for the AB5500 MFD driver */ +#include #include #include #include diff --git a/drivers/mtd/maps/bcm963xx-flash.c b/drivers/mtd/maps/bcm963xx-flash.c index 608967fe74c6..736ca10ca9f1 100644 --- a/drivers/mtd/maps/bcm963xx-flash.c +++ b/drivers/mtd/maps/bcm963xx-flash.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index f4e3d82379d7..7f43cf86d776 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -83,8 +83,10 @@ config DELL_LAPTOP depends on EXPERIMENTAL depends on BACKLIGHT_CLASS_DEVICE depends on RFKILL || RFKILL = n - depends on POWER_SUPPLY depends on SERIO_I8042 + select POWER_SUPPLY + select LEDS_CLASS + select NEW_LEDS default n ---help--- This driver adds support for rfkill and backlight control to Dell diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 4cb0d0a3e57b..fc7bbba585ce 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -66,14 +66,16 @@ static int debug; module_param(debug, int, 0600); -#define T1 (HZ/10) -#define T2 (HZ/3) -#define N2 3 +/* Defaults: these are from the specification */ + +#define T1 10 /* 100mS */ +#define T2 34 /* 333mS */ +#define N2 3 /* Retry 3 times */ /* Use long timers for testing at low speed with debug on */ #ifdef DEBUG_TIMING -#define T1 HZ -#define T2 (2 * HZ) +#define T1 100 +#define T2 200 #endif /* diff --git a/fs/proc/base.c b/fs/proc/base.c index 2db1bd3173b2..851ba3dcdc29 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -1652,46 +1652,12 @@ out: return error; } -static int proc_pid_fd_link_getattr(struct vfsmount *mnt, struct dentry *dentry, - struct kstat *stat) -{ - struct inode *inode = dentry->d_inode; - struct task_struct *task = get_proc_task(inode); - int rc; - - if (task == NULL) - return -ESRCH; - - rc = -EACCES; - if (lock_trace(task)) - goto out_task; - - generic_fillattr(inode, stat); - unlock_trace(task); - rc = 0; -out_task: - put_task_struct(task); - return rc; -} - static const struct inode_operations proc_pid_link_inode_operations = { .readlink = proc_pid_readlink, .follow_link = proc_pid_follow_link, .setattr = proc_setattr, }; -static const struct inode_operations proc_fdinfo_link_inode_operations = { - .setattr = proc_setattr, - .getattr = proc_pid_fd_link_getattr, -}; - -static const struct inode_operations proc_fd_link_inode_operations = { - .readlink = proc_pid_readlink, - .follow_link = proc_pid_follow_link, - .setattr = proc_setattr, - .getattr = proc_pid_fd_link_getattr, -}; - /* building an inode */ @@ -1923,61 +1889,49 @@ out: static int proc_fd_info(struct inode *inode, struct path *path, char *info) { - struct task_struct *task; - struct files_struct *files; + struct task_struct *task = get_proc_task(inode); + struct files_struct *files = NULL; struct file *file; int fd = proc_fd(inode); - int rc; - - task = get_proc_task(inode); - if (!task) - return -ENOENT; - - rc = -EACCES; - if (lock_trace(task)) - goto out_task; - - rc = -ENOENT; - files = get_files_struct(task); - if (files == NULL) - goto out_unlock; - /* - * We are not taking a ref to the file structure, so we must - * hold ->file_lock. - */ - spin_lock(&files->file_lock); - file = fcheck_files(files, fd); - if (file) { - unsigned int f_flags; - struct fdtable *fdt; - - fdt = files_fdtable(files); - f_flags = file->f_flags & ~O_CLOEXEC; - if (FD_ISSET(fd, fdt->close_on_exec)) - f_flags |= O_CLOEXEC; - - if (path) { - *path = file->f_path; - path_get(&file->f_path); + if (task) { + files = get_files_struct(task); + put_task_struct(task); + } + if (files) { + /* + * We are not taking a ref to the file structure, so we must + * hold ->file_lock. + */ + spin_lock(&files->file_lock); + file = fcheck_files(files, fd); + if (file) { + unsigned int f_flags; + struct fdtable *fdt; + + fdt = files_fdtable(files); + f_flags = file->f_flags & ~O_CLOEXEC; + if (FD_ISSET(fd, fdt->close_on_exec)) + f_flags |= O_CLOEXEC; + + if (path) { + *path = file->f_path; + path_get(&file->f_path); + } + if (info) + snprintf(info, PROC_FDINFO_MAX, + "pos:\t%lli\n" + "flags:\t0%o\n", + (long long) file->f_pos, + f_flags); + spin_unlock(&files->file_lock); + put_files_struct(files); + return 0; } - if (info) - snprintf(info, PROC_FDINFO_MAX, - "pos:\t%lli\n" - "flags:\t0%o\n", - (long long) file->f_pos, - f_flags); - rc = 0; - } else - rc = -ENOENT; - spin_unlock(&files->file_lock); - put_files_struct(files); - -out_unlock: - unlock_trace(task); -out_task: - put_task_struct(task); - return rc; + spin_unlock(&files->file_lock); + put_files_struct(files); + } + return -ENOENT; } static int proc_fd_link(struct inode *inode, struct path *path) @@ -2072,7 +2026,7 @@ static struct dentry *proc_fd_instantiate(struct inode *dir, spin_unlock(&files->file_lock); put_files_struct(files); - inode->i_op = &proc_fd_link_inode_operations; + inode->i_op = &proc_pid_link_inode_operations; inode->i_size = 64; ei->op.proc_get_link = proc_fd_link; d_set_d_op(dentry, &tid_fd_dentry_operations); @@ -2104,12 +2058,7 @@ static struct dentry *proc_lookupfd_common(struct inode *dir, if (fd == ~0U) goto out; - result = ERR_PTR(-EACCES); - if (lock_trace(task)) - goto out; - result = instantiate(dir, dentry, task, &fd); - unlock_trace(task); out: put_task_struct(task); out_no_task: @@ -2129,28 +2078,23 @@ static int proc_readfd_common(struct file * filp, void * dirent, retval = -ENOENT; if (!p) goto out_no_task; - - retval = -EACCES; - if (lock_trace(p)) - goto out; - retval = 0; fd = filp->f_pos; switch (fd) { case 0: if (filldir(dirent, ".", 1, 0, inode->i_ino, DT_DIR) < 0) - goto out_unlock; + goto out; filp->f_pos++; case 1: ino = parent_ino(dentry); if (filldir(dirent, "..", 2, 1, ino, DT_DIR) < 0) - goto out_unlock; + goto out; filp->f_pos++; default: files = get_files_struct(p); if (!files) - goto out_unlock; + goto out; rcu_read_lock(); for (fd = filp->f_pos-2; fd < files_fdtable(files)->max_fds; @@ -2174,9 +2118,6 @@ static int proc_readfd_common(struct file * filp, void * dirent, rcu_read_unlock(); put_files_struct(files); } - -out_unlock: - unlock_trace(p); out: put_task_struct(p); out_no_task: @@ -2254,7 +2195,6 @@ static struct dentry *proc_fdinfo_instantiate(struct inode *dir, ei->fd = fd; inode->i_mode = S_IFREG | S_IRUSR; inode->i_fop = &proc_fdinfo_file_operations; - inode->i_op = &proc_fdinfo_link_inode_operations; d_set_d_op(dentry, &tid_fd_dentry_operations); d_add(dentry, inode); /* Close the race of the process dying before we return the dentry */ diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index afb94583960c..98ce8124b1cc 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -41,7 +41,7 @@ struct devfreq_dev_status { unsigned long total_time; unsigned long busy_time; unsigned long current_frequency; - void *private_date; + void *private_data; }; /** diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h index 08a2fee40659..aad6bd4b3efd 100644 --- a/include/linux/hwspinlock.h +++ b/include/linux/hwspinlock.h @@ -118,7 +118,6 @@ int __hwspin_trylock(struct hwspinlock *hwlock, int mode, unsigned long *flags) static inline void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags) { - return 0; } static inline int hwspin_lock_get_id(struct hwspinlock *hwlock) diff --git a/kernel/power/qos.c b/kernel/power/qos.c index 56db75147186..995e3bd3417b 100644 --- a/kernel/power/qos.c +++ b/kernel/power/qos.c @@ -70,6 +70,7 @@ static struct pm_qos_constraints cpu_dma_constraints = { }; static struct pm_qos_object cpu_dma_pm_qos = { .constraints = &cpu_dma_constraints, + .name = "cpu_dma_latency", }; static BLOCKING_NOTIFIER_HEAD(network_lat_notifier); diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 8d02ccb10c59..30e2befd6f2a 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -42,6 +42,7 @@ $default{"BISECT_MANUAL"} = 0; $default{"BISECT_SKIP"} = 1; $default{"SUCCESS_LINE"} = "login:"; $default{"DETECT_TRIPLE_FAULT"} = 1; +$default{"NO_INSTALL"} = 0; $default{"BOOTED_TIMEOUT"} = 1; $default{"DIE_ON_FAILURE"} = 1; $default{"SSH_EXEC"} = "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND"; @@ -84,6 +85,7 @@ my $grub_number; my $target; my $make; my $post_install; +my $no_install; my $noclean; my $minconfig; my $start_minconfig; @@ -115,6 +117,7 @@ my $timeout; my $booted_timeout; my $detect_triplefault; my $console; +my $reboot_success_line; my $success_line; my $stop_after_success; my $stop_after_failure; @@ -130,6 +133,12 @@ my %config_help; my %variable; my %force_config; +# do not force reboots on config problems +my $no_reboot = 1; + +# default variables that can be used +chomp ($variable{"PWD"} = `pwd`); + $config_help{"MACHINE"} = << "EOF" The machine hostname that you will test. EOF @@ -241,6 +250,7 @@ sub read_yn { sub get_ktest_config { my ($config) = @_; + my $ans; return if (defined($opt{$config})); @@ -254,16 +264,17 @@ sub get_ktest_config { if (defined($default{$config})) { print "\[$default{$config}\] "; } - $entered_configs{$config} = ; - $entered_configs{$config} =~ s/^\s*(.*\S)\s*$/$1/; - if ($entered_configs{$config} =~ /^\s*$/) { + $ans = ; + $ans =~ s/^\s*(.*\S)\s*$/$1/; + if ($ans =~ /^\s*$/) { if ($default{$config}) { - $entered_configs{$config} = $default{$config}; + $ans = $default{$config}; } else { print "Your answer can not be blank\n"; next; } } + $entered_configs{$config} = process_variables($ans); last; } } @@ -298,7 +309,7 @@ sub get_ktest_configs { } sub process_variables { - my ($value) = @_; + my ($value, $remove_undef) = @_; my $retval = ""; # We want to check for '\', and it is just easier @@ -316,6 +327,10 @@ sub process_variables { $retval = "$retval$begin"; if (defined($variable{$var})) { $retval = "$retval$variable{$var}"; + } elsif (defined($remove_undef) && $remove_undef) { + # for if statements, any variable that is not defined, + # we simple convert to 0 + $retval = "${retval}0"; } else { # put back the origin piece. $retval = "$retval\$\{$var\}"; @@ -331,10 +346,17 @@ sub process_variables { } sub set_value { - my ($lvalue, $rvalue) = @_; + my ($lvalue, $rvalue, $override, $overrides, $name) = @_; if (defined($opt{$lvalue})) { - die "Error: Option $lvalue defined more than once!\n"; + if (!$override || defined(${$overrides}{$lvalue})) { + my $extra = ""; + if ($override) { + $extra = "In the same override section!\n"; + } + die "$name: $.: Option $lvalue defined more than once!\n$extra"; + } + ${$overrides}{$lvalue} = $rvalue; } if ($rvalue =~ /^\s*$/) { delete $opt{$lvalue}; @@ -355,86 +377,274 @@ sub set_variable { } } -sub read_config { - my ($config) = @_; +sub process_compare { + my ($lval, $cmp, $rval) = @_; + + # remove whitespace + + $lval =~ s/^\s*//; + $lval =~ s/\s*$//; + + $rval =~ s/^\s*//; + $rval =~ s/\s*$//; + + if ($cmp eq "==") { + return $lval eq $rval; + } elsif ($cmp eq "!=") { + return $lval ne $rval; + } + + my $statement = "$lval $cmp $rval"; + my $ret = eval $statement; + + # $@ stores error of eval + if ($@) { + return -1; + } + + return $ret; +} + +sub value_defined { + my ($val) = @_; + + return defined($variable{$2}) || + defined($opt{$2}); +} + +my $d = 0; +sub process_expression { + my ($name, $val) = @_; + + my $c = $d++; + + while ($val =~ s/\(([^\(]*?)\)/\&\&\&\&VAL\&\&\&\&/) { + my $express = $1; + + if (process_expression($name, $express)) { + $val =~ s/\&\&\&\&VAL\&\&\&\&/ 1 /; + } else { + $val =~ s/\&\&\&\&VAL\&\&\&\&/ 0 /; + } + } + + $d--; + my $OR = "\\|\\|"; + my $AND = "\\&\\&"; + + while ($val =~ s/^(.*?)($OR|$AND)//) { + my $express = $1; + my $op = $2; + + if (process_expression($name, $express)) { + if ($op eq "||") { + return 1; + } + } else { + if ($op eq "&&") { + return 0; + } + } + } + + if ($val =~ /(.*)(==|\!=|>=|<=|>|<)(.*)/) { + my $ret = process_compare($1, $2, $3); + if ($ret < 0) { + die "$name: $.: Unable to process comparison\n"; + } + return $ret; + } + + if ($val =~ /^\s*(NOT\s*)?DEFINED\s+(\S+)\s*$/) { + if (defined $1) { + return !value_defined($2); + } else { + return value_defined($2); + } + } + + if ($val =~ /^\s*0\s*$/) { + return 0; + } elsif ($val =~ /^\s*\d+\s*$/) { + return 1; + } + + die ("$name: $.: Undefined content $val in if statement\n"); +} + +sub process_if { + my ($name, $value) = @_; + + # Convert variables and replace undefined ones with 0 + my $val = process_variables($value, 1); + my $ret = process_expression $name, $val; + + return $ret; +} - open(IN, $config) || die "can't read file $config"; +sub __read_config { + my ($config, $current_test_num) = @_; + + my $in; + open($in, $config) || die "can't read file $config"; my $name = $config; $name =~ s,.*/(.*),$1,; - my $test_num = 0; + my $test_num = $$current_test_num; my $default = 1; my $repeat = 1; my $num_tests_set = 0; my $skip = 0; my $rest; + my $line; my $test_case = 0; + my $if = 0; + my $if_set = 0; + my $override = 0; - while () { + my %overrides; + + while (<$in>) { # ignore blank lines and comments next if (/^\s*$/ || /\s*\#/); - if (/^\s*TEST_START(.*)/) { + if (/^\s*(TEST_START|DEFAULTS)\b(.*)/) { - $rest = $1; + my $type = $1; + $rest = $2; + $line = $2; - if ($num_tests_set) { - die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n"; - } + my $old_test_num; + my $old_repeat; + $override = 0; + + if ($type eq "TEST_START") { + + if ($num_tests_set) { + die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n"; + } - my $old_test_num = $test_num; - my $old_repeat = $repeat; + $old_test_num = $test_num; + $old_repeat = $repeat; - $test_num += $repeat; - $default = 0; - $repeat = 1; + $test_num += $repeat; + $default = 0; + $repeat = 1; + } else { + $default = 1; + } - if ($rest =~ /\s+SKIP(.*)/) { - $rest = $1; + # If SKIP is anywhere in the line, the command will be skipped + if ($rest =~ s/\s+SKIP\b//) { $skip = 1; } else { $test_case = 1; $skip = 0; } - if ($rest =~ /\s+ITERATE\s+(\d+)(.*)$/) { - $repeat = $1; - $rest = $2; - $repeat_tests{"$test_num"} = $repeat; + if ($rest =~ s/\sELSE\b//) { + if (!$if) { + die "$name: $.: ELSE found with out matching IF section\n$_"; + } + $if = 0; + + if ($if_set) { + $skip = 1; + } else { + $skip = 0; + } } - if ($rest =~ /\s+SKIP(.*)/) { - $rest = $1; - $skip = 1; + if ($rest =~ s/\sIF\s+(.*)//) { + if (process_if($name, $1)) { + $if_set = 1; + } else { + $skip = 1; + } + $if = 1; + } else { + $if = 0; + $if_set = 0; } - if ($rest !~ /^\s*$/) { - die "$name: $.: Gargbage found after TEST_START\n$_"; + if (!$skip) { + if ($type eq "TEST_START") { + if ($rest =~ s/\s+ITERATE\s+(\d+)//) { + $repeat = $1; + $repeat_tests{"$test_num"} = $repeat; + } + } elsif ($rest =~ s/\sOVERRIDE\b//) { + # DEFAULT only + $override = 1; + # Clear previous overrides + %overrides = (); + } + } + + if (!$skip && $rest !~ /^\s*$/) { + die "$name: $.: Gargbage found after $type\n$_"; } - if ($skip) { + if ($skip && $type eq "TEST_START") { $test_num = $old_test_num; $repeat = $old_repeat; } - } elsif (/^\s*DEFAULTS(.*)$/) { - $default = 1; - + } elsif (/^\s*ELSE\b(.*)$/) { + if (!$if) { + die "$name: $.: ELSE found with out matching IF section\n$_"; + } $rest = $1; - - if ($rest =~ /\s+SKIP(.*)/) { - $rest = $1; + if ($if_set) { $skip = 1; + $rest = ""; } else { $skip = 0; + + if ($rest =~ /\sIF\s+(.*)/) { + # May be a ELSE IF section. + if (!process_if($name, $1)) { + $skip = 1; + } + $rest = ""; + } else { + $if = 0; + } } if ($rest !~ /^\s*$/) { die "$name: $.: Gargbage found after DEFAULTS\n$_"; } + } elsif (/^\s*INCLUDE\s+(\S+)/) { + + next if ($skip); + + if (!$default) { + die "$name: $.: INCLUDE can only be done in default sections\n$_"; + } + + my $file = process_variables($1); + + if ($file !~ m,^/,) { + # check the path of the config file first + if ($config =~ m,(.*)/,) { + if (-f "$1/$file") { + $file = "$1/$file"; + } + } + } + + if ( ! -r $file ) { + die "$name: $.: Can't read file $file\n$_"; + } + + if (__read_config($file, \$test_num)) { + $test_case = 1; + } + } elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) { next if ($skip); @@ -460,10 +670,10 @@ sub read_config { } if ($default || $lvalue =~ /\[\d+\]$/) { - set_value($lvalue, $rvalue); + set_value($lvalue, $rvalue, $override, \%overrides, $name); } else { my $val = "$lvalue\[$test_num\]"; - set_value($val, $rvalue); + set_value($val, $rvalue, $override, \%overrides, $name); if ($repeat > 1) { $repeats{$val} = $repeat; @@ -490,13 +700,26 @@ sub read_config { } } - close(IN); - if ($test_num) { $test_num += $repeat - 1; $opt{"NUM_TESTS"} = $test_num; } + close($in); + + $$current_test_num = $test_num; + + return $test_case; +} + +sub read_config { + my ($config) = @_; + + my $test_case; + my $test_num = 0; + + $test_case = __read_config $config, \$test_num; + # make sure we have all mandatory configs get_ktest_configs; @@ -603,8 +826,20 @@ sub doprint { } sub run_command; +sub start_monitor; +sub end_monitor; +sub wait_for_monitor; sub reboot { + my ($time) = @_; + + if (defined($time)) { + start_monitor; + # flush out current monitor + # May contain the reboot success line + wait_for_monitor 1; + } + # try to reboot normally if (run_command $reboot) { if (defined($powercycle_after_reboot)) { @@ -615,12 +850,17 @@ sub reboot { # nope? power cycle it. run_command "$power_cycle"; } + + if (defined($time)) { + wait_for_monitor($time, $reboot_success_line); + end_monitor; + } } sub do_not_reboot { my $i = $iteration; - return $test_type eq "build" || + return $test_type eq "build" || $no_reboot || ($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") || ($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build"); } @@ -693,16 +933,29 @@ sub end_monitor { } sub wait_for_monitor { - my ($time) = @_; + my ($time, $stop) = @_; + my $full_line = ""; my $line; + my $booted = 0; doprint "** Wait for monitor to settle down **\n"; # read the monitor and wait for the system to calm down - do { + while (!$booted) { $line = wait_for_input($monitor_fp, $time); - print "$line" if (defined($line)); - } while (defined($line)); + last if (!defined($line)); + print "$line"; + $full_line .= $line; + + if (defined($stop) && $full_line =~ /$stop/) { + doprint "wait for monitor detected $stop\n"; + $booted = 1; + } + + if ($line =~ /\n/) { + $full_line = ""; + } + } print "** Monitor flushed **\n"; } @@ -719,10 +972,7 @@ sub fail { # no need to reboot for just building. if (!do_not_reboot) { doprint "REBOOTING\n"; - reboot; - start_monitor; - wait_for_monitor $sleep_time; - end_monitor; + reboot $sleep_time; } my $name = ""; @@ -854,9 +1104,12 @@ sub get_grub_index { open(IN, "$ssh_grub |") or die "unable to get menu.lst"; + my $found = 0; + while () { if (/^\s*title\s+$grub_menu\s*$/) { $grub_number++; + $found = 1; last; } elsif (/^\s*title\s/) { $grub_number++; @@ -865,7 +1118,7 @@ sub get_grub_index { close(IN); die "Could not find '$grub_menu' in /boot/grub/menu on $machine" - if ($grub_number < 0); + if (!$found); doprint "$grub_number\n"; } @@ -902,7 +1155,8 @@ sub wait_for_input sub reboot_to { if ($reboot_type eq "grub") { - run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch && reboot)'"; + run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'"; + reboot; return; } @@ -1083,6 +1337,8 @@ sub do_post_install { sub install { + return if ($no_install); + run_scp "$outputdir/$build_target", "$target_image" or dodie "failed to copy image"; @@ -1140,6 +1396,11 @@ sub get_version { } sub start_monitor_and_boot { + # Make sure the stable kernel has finished booting + start_monitor; + wait_for_monitor 5; + end_monitor; + get_grub_index; get_version; install; @@ -1250,6 +1511,10 @@ sub build { unlink $buildlog; + # Failed builds should not reboot the target + my $save_no_reboot = $no_reboot; + $no_reboot = 1; + if (defined($pre_build)) { my $ret = run_command $pre_build; if (!$ret && defined($pre_build_die) && @@ -1272,15 +1537,15 @@ sub build { # allow for empty configs run_command "touch $output_config"; - run_command "mv $output_config $outputdir/config_temp" or - dodie "moving .config"; + if (!$noclean) { + run_command "mv $output_config $outputdir/config_temp" or + dodie "moving .config"; - if (!$noclean && !run_command "$make mrproper") { - dodie "make mrproper"; - } + run_command "$make mrproper" or dodie "make mrproper"; - run_command "mv $outputdir/config_temp $output_config" or - dodie "moving config_temp"; + run_command "mv $outputdir/config_temp $output_config" or + dodie "moving config_temp"; + } } elsif (!$noclean) { unlink "$output_config"; @@ -1318,10 +1583,15 @@ sub build { if (!$build_ret) { # bisect may need this to pass - return 0 if ($in_bisect); + if ($in_bisect) { + $no_reboot = $save_no_reboot; + return 0; + } fail "failed build" and return 0; } + $no_reboot = $save_no_reboot; + return 1; } @@ -1356,10 +1626,7 @@ sub success { if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) { doprint "Reboot and wait $sleep_time seconds\n"; - reboot; - start_monitor; - wait_for_monitor $sleep_time; - end_monitor; + reboot $sleep_time; } } @@ -1500,10 +1767,7 @@ sub run_git_bisect { sub bisect_reboot { doprint "Reboot and sleep $bisect_sleep_time seconds\n"; - reboot; - start_monitor; - wait_for_monitor $bisect_sleep_time; - end_monitor; + reboot $bisect_sleep_time; } # returns 1 on success, 0 on failure, -1 on skip @@ -2066,10 +2330,7 @@ sub config_bisect { sub patchcheck_reboot { doprint "Reboot and sleep $patchcheck_sleep_time seconds\n"; - reboot; - start_monitor; - wait_for_monitor $patchcheck_sleep_time; - end_monitor; + reboot $patchcheck_sleep_time; } sub patchcheck { @@ -2178,12 +2439,31 @@ sub patchcheck { } my %depends; +my %depcount; my $iflevel = 0; my @ifdeps; # prevent recursion my %read_kconfigs; +sub add_dep { + # $config depends on $dep + my ($config, $dep) = @_; + + if (defined($depends{$config})) { + $depends{$config} .= " " . $dep; + } else { + $depends{$config} = $dep; + } + + # record the number of configs depending on $dep + if (defined $depcount{$dep}) { + $depcount{$dep}++; + } else { + $depcount{$dep} = 1; + } +} + # taken from streamline_config.pl sub read_kconfig { my ($kconfig) = @_; @@ -2230,30 +2510,19 @@ sub read_kconfig { $config = $2; for (my $i = 0; $i < $iflevel; $i++) { - if ($i) { - $depends{$config} .= " " . $ifdeps[$i]; - } else { - $depends{$config} = $ifdeps[$i]; - } - $state = "DEP"; + add_dep $config, $ifdeps[$i]; } # collect the depends for the config } elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) { - if (defined($depends{$1})) { - $depends{$config} .= " " . $1; - } else { - $depends{$config} = $1; - } + add_dep $config, $1; # Get the configs that select this config - } elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) { - if (defined($depends{$1})) { - $depends{$1} .= " " . $config; - } else { - $depends{$1} = $config; - } + } elsif ($state eq "NEW" && /^\s*select\s+(\S+)/) { + + # selected by depends on config + add_dep $1, $config; # Check for if statements } elsif (/^if\s+(.*\S)\s*$/) { @@ -2365,11 +2634,18 @@ sub make_new_config { close OUT; } +sub chomp_config { + my ($config) = @_; + + $config =~ s/CONFIG_//; + + return $config; +} + sub get_depends { my ($dep) = @_; - my $kconfig = $dep; - $kconfig =~ s/CONFIG_//; + my $kconfig = chomp_config $dep; $dep = $depends{"$kconfig"}; @@ -2419,8 +2695,7 @@ sub test_this_config { return undef; } - my $kconfig = $config; - $kconfig =~ s/CONFIG_//; + my $kconfig = chomp_config $config; # Test dependencies first if (defined($depends{"$kconfig"})) { @@ -2510,6 +2785,14 @@ sub make_min_config { my @config_keys = keys %min_configs; + # All configs need a depcount + foreach my $config (@config_keys) { + my $kconfig = chomp_config $config; + if (!defined $depcount{$kconfig}) { + $depcount{$kconfig} = 0; + } + } + # Remove anything that was set by the make allnoconfig # we shouldn't need them as they get set for us anyway. foreach my $config (@config_keys) { @@ -2548,8 +2831,13 @@ sub make_min_config { # Now disable each config one by one and do a make oldconfig # till we find a config that changes our list. - # Put configs that did not modify the config at the end. my @test_configs = keys %min_configs; + + # Sort keys by who is most dependent on + @test_configs = sort { $depcount{chomp_config($b)} <=> $depcount{chomp_config($a)} } + @test_configs ; + + # Put configs that did not modify the config at the end. my $reset = 1; for (my $i = 0; $i < $#test_configs; $i++) { if (!defined($nochange_config{$test_configs[0]})) { @@ -2659,10 +2947,7 @@ sub make_min_config { } doprint "Reboot and wait $sleep_time seconds\n"; - reboot; - start_monitor; - wait_for_monitor $sleep_time; - end_monitor; + reboot $sleep_time; } success $i; @@ -2783,6 +3068,9 @@ sub set_test_option { # First we need to do is the builds for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { + # Do not reboot on failing test options + $no_reboot = 1; + $iteration = $i; my $makecmd = set_test_option("MAKE_CMD", $i); @@ -2811,6 +3099,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $reboot_type = set_test_option("REBOOT_TYPE", $i); $grub_menu = set_test_option("GRUB_MENU", $i); $post_install = set_test_option("POST_INSTALL", $i); + $no_install = set_test_option("NO_INSTALL", $i); $reboot_script = set_test_option("REBOOT_SCRIPT", $i); $reboot_on_error = set_test_option("REBOOT_ON_ERROR", $i); $poweroff_on_error = set_test_option("POWEROFF_ON_ERROR", $i); @@ -2832,6 +3121,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $console = set_test_option("CONSOLE", $i); $detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i); $success_line = set_test_option("SUCCESS_LINE", $i); + $reboot_success_line = set_test_option("REBOOT_SUCCESS_LINE", $i); $stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i); $stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i); $stop_test_after = set_test_option("STOP_TEST_AFTER", $i); @@ -2850,9 +3140,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { chdir $builddir || die "can't change directory to $builddir"; - if (!-d $tmpdir) { - mkpath($tmpdir) or - die "can't create $tmpdir"; + foreach my $dir ($tmpdir, $outputdir) { + if (!-d $dir) { + mkpath($dir) or + die "can't create $dir"; + } } $ENV{"SSH_USER"} = $ssh_user; @@ -2889,8 +3181,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $run_type = "ERROR"; } + my $installme = ""; + $installme = " no_install" if ($no_install); + doprint "\n\n"; - doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type\n\n"; + doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type$installme\n\n"; unlink $dmesg; unlink $buildlog; @@ -2911,6 +3206,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { die "failed to checkout $checkout"; } + $no_reboot = 0; + + if ($test_type eq "bisect") { bisect $i; next; @@ -2929,6 +3227,13 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { build $build_type or next; } + if ($test_type eq "install") { + get_version; + install; + success $i; + next; + } + if ($test_type ne "build") { my $failed = 0; start_monitor_and_boot or $failed = 1; diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index b8bcd14b5a4d..dbedfa196727 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -72,6 +72,128 @@ # the same option name under the same test or as default # ktest will fail to execute, and no tests will run. # +# DEFAULTS OVERRIDE +# +# Options defined in the DEFAULTS section can not be duplicated +# even if they are defined in two different DEFAULT sections. +# This is done to catch mistakes where an option is added but +# the previous option was forgotten about and not commented. +# +# The OVERRIDE keyword can be added to a section to allow this +# section to override other DEFAULT sections values that have +# been defined previously. It will only override options that +# have been defined before its use. Options defined later +# in a non override section will still error. The same option +# can not be defined in the same section even if that section +# is marked OVERRIDE. +# +# +# +# Both TEST_START and DEFAULTS sections can also have the IF keyword +# The value after the IF must evaluate into a 0 or non 0 positive +# integer, and can use the config variables (explained below). +# +# DEFAULTS IF ${IS_X86_32} +# +# The above will process the DEFAULTS section if the config +# variable IS_X86_32 evaluates to a non zero positive integer +# otherwise if it evaluates to zero, it will act the same +# as if the SKIP keyword was used. +# +# The ELSE keyword can be used directly after a section with +# a IF statement. +# +# TEST_START IF ${RUN_NET_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network +# +# ELSE +# +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-normal +# +# +# The ELSE keyword can also contain an IF statement to allow multiple +# if then else sections. But all the sections must be either +# DEFAULT or TEST_START, they can not be a mixture. +# +# TEST_START IF ${RUN_NET_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network +# +# ELSE IF ${RUN_DISK_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-tests +# +# ELSE IF ${RUN_CPU_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-cpu +# +# ELSE +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network +# +# The if statement may also have comparisons that will and for +# == and !=, strings may be used for both sides. +# +# BOX_TYPE := x86_32 +# +# DEFAULTS IF ${BOX_TYPE} == x86_32 +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-32 +# ELSE +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-64 +# +# The DEFINED keyword can be used by the IF statements too. +# It returns true if the given config variable or option has been defined +# or false otherwise. +# +# +# DEFAULTS IF DEFINED USE_CC +# CC := ${USE_CC} +# ELSE +# CC := gcc +# +# +# As well as NOT DEFINED. +# +# DEFAULTS IF NOT DEFINED MAKE_CMD +# MAKE_CMD := make ARCH=x86 +# +# +# And/or ops (&&,||) may also be used to make complex conditionals. +# +# TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf +# +# Notice the use of paranthesis. Without any paranthesis the above would be +# processed the same as: +# +# TEST_START IF DEFINED ALL_TESTS || (${MYTEST} == boottest && ${MACHINE} == gandalf) +# +# +# +# INCLUDE file +# +# The INCLUDE keyword may be used in DEFAULT sections. This will +# read another config file and process that file as well. The included +# file can include other files, add new test cases or default +# statements. Config variables will be passed to these files and changes +# to config variables will be seen by top level config files. Including +# a file is processed just like the contents of the file was cut and pasted +# into the top level file, except, that include files that end with +# TEST_START sections will have that section ended at the end of +# the include file. That is, an included file is included followed +# by another DEFAULT keyword. +# +# Unlike other files referenced in this config, the file path does not need +# to be absolute. If the file does not start with '/', then the directory +# that the current config file was located in is used. If no config by the +# given name is found there, then the current directory is searched. +# +# INCLUDE myfile +# DEFAULT +# +# is the same as: +# +# INCLUDE myfile +# +# Note, if the include file does not contain a full path, the file is +# searched first by the location of the original include file, and then +# by the location that ktest.pl was executed in. +# #### Config variables #### # @@ -253,9 +375,10 @@ # The default test type (default test) # The test types may be: -# build - only build the kernel, do nothing else -# boot - build and boot the kernel -# test - build, boot and if TEST is set, run the test script +# build - only build the kernel, do nothing else +# install - build and install, but do nothing else (does not reboot) +# boot - build, install, and boot the kernel +# test - build, boot and if TEST is set, run the test script # (If TEST is not set, it defaults back to boot) # bisect - Perform a bisect on the kernel (see BISECT_TYPE below) # patchcheck - Do a test on a series of commits in git (see PATCHCHECK below) @@ -293,6 +416,13 @@ # or on some systems: #POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION +# If for some reason you just want to boot the kernel and you do not +# want the test to install anything new. For example, you may just want +# to boot test the same kernel over and over and do not want to go through +# the hassle of installing anything, you can set this option to 1 +# (default 0) +#NO_INSTALL = 1 + # If there is a script that you require to run before the build is done # you can specify it with PRE_BUILD. # @@ -415,6 +545,14 @@ # (default "login:") #SUCCESS_LINE = login: +# To speed up between reboots, defining a line that the +# default kernel produces that represents that the default +# kernel has successfully booted and can be used to pass +# a new test kernel to it. Otherwise ktest.pl will wait till +# SLEEP_TIME to continue. +# (default undefined) +#REBOOT_SUCCESS_LINE = login: + # In case the console constantly fills the screen, having # a specified time to stop the test after success is recommended. # (in seconds) @@ -480,6 +618,8 @@ # another test. If a reboot to the reliable kernel happens, # we wait SLEEP_TIME for the console to stop producing output # before starting the next test. +# +# You can speed up reboot times even more by setting REBOOT_SUCCESS_LINE. # (default 60) #SLEEP_TIME = 60