From: Abhijeet Kolekar Date: Wed, 8 Apr 2009 18:26:48 +0000 (-0700) Subject: iwl3945: use iwl_mac_config from iwlwifi X-Git-Tag: v2.6.31-rc1~330^2~568^2~85 X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=commitdiff_plain;h=4808368dad3263ac46e71f037c0dcd2dcf082525 iwl3945: use iwl_mac_config from iwlwifi 3945 can now use iwl_mac_config from iwlwifi Signed-off-by: Abhijeet Kolekar Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 5cc30a223cf0..4640996aa298 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2036,139 +2036,6 @@ static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) return NETDEV_TX_OK; } -/** - * iwl_mac_config - mac80211 config callback - * - * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to - * be set inappropriately and the driver currently sets the hardware up to - * use it whenever needed. - */ -static int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) -{ - struct iwl_priv *priv = hw->priv; - const struct iwl_channel_info *ch_info; - struct ieee80211_conf *conf = &hw->conf; - unsigned long flags = 0; - int ret = 0; - u16 ch; - int scan_active = 0; - - mutex_lock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n", - conf->channel->hw_value, changed); - - if (unlikely(!priv->cfg->mod_params->disable_hw_scan && - test_bit(STATUS_SCANNING, &priv->status))) { - scan_active = 1; - IWL_DEBUG_MAC80211(priv, "leave - scanning\n"); - } - - - /* during scanning mac80211 will delay channel setting until - * scan finish with changed = 0 - */ - if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) { - if (scan_active) - goto set_ch_out; - - ch = ieee80211_frequency_to_channel(conf->channel->center_freq); - ch_info = iwl_get_channel_info(priv, conf->channel->band, ch); - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n"); - ret = -EINVAL; - goto set_ch_out; - } - - if (priv->iw_mode == NL80211_IFTYPE_ADHOC && - !is_channel_ibss(ch_info)) { - IWL_ERR(priv, "channel %d in band %d not " - "IBSS channel\n", - conf->channel->hw_value, conf->channel->band); - ret = -EINVAL; - goto set_ch_out; - } - - priv->current_ht_config.is_ht = conf_is_ht(conf); - - spin_lock_irqsave(&priv->lock, flags); - - - /* if we are switching from ht to 2.4 clear flags - * from any ht related info since 2.4 does not - * support ht */ - if ((le16_to_cpu(priv->staging_rxon.channel) != ch)) - priv->staging_rxon.flags = 0; - - iwl_set_rxon_channel(priv, conf->channel); - - iwl_set_flags_for_band(priv, conf->channel->band); - spin_unlock_irqrestore(&priv->lock, flags); - set_ch_out: - /* The list of supported rates and rate mask can be different - * for each band; since the band may have changed, reset - * the rate mask to what mac80211 lists */ - iwl_set_rate(priv); - } - - if (changed & IEEE80211_CONF_CHANGE_PS) { - if (conf->flags & IEEE80211_CONF_PS) - ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3); - else - ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM); - if (ret) - IWL_DEBUG_MAC80211(priv, "Error setting power level\n"); - - } - - if (changed & IEEE80211_CONF_CHANGE_POWER) { - IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n", - priv->tx_power_user_lmt, conf->power_level); - - iwl_set_tx_power(priv, conf->power_level, false); - } - - /* call to ensure that 4965 rx_chain is set properly in monitor mode */ - if (priv->cfg->ops->hcmd->set_rxon_chain) - priv->cfg->ops->hcmd->set_rxon_chain(priv); - - if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) { - if (conf->radio_enabled && - iwl_radio_kill_sw_enable_radio(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - " - "waiting for uCode\n"); - goto out; - } - - if (!conf->radio_enabled) - iwl_radio_kill_sw_disable_radio(priv); - } - - if (!conf->radio_enabled) { - IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n"); - goto out; - } - - if (!iwl_is_ready(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); - goto out; - } - - if (scan_active) - goto out; - - if (memcmp(&priv->active_rxon, - &priv->staging_rxon, sizeof(priv->staging_rxon))) - iwlcore_commit_rxon(priv); - else - IWL_DEBUG_INFO(priv, "No re-sending same RXON configuration.\n"); - - -out: - IWL_DEBUG_MAC80211(priv, "leave\n"); - mutex_unlock(&priv->mutex); - return ret; -} - static void iwl_config_ap(struct iwl_priv *priv) { int ret = 0; diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index b8afd9b81fb8..4369fc8978f9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2443,6 +2443,142 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw, } EXPORT_SYMBOL(iwl_mac_remove_interface); +/** + * iwl_mac_config - mac80211 config callback + * + * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to + * be set inappropriately and the driver currently sets the hardware up to + * use it whenever needed. + */ +int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) +{ + struct iwl_priv *priv = hw->priv; + const struct iwl_channel_info *ch_info; + struct ieee80211_conf *conf = &hw->conf; + unsigned long flags = 0; + int ret = 0; + u16 ch; + int scan_active = 0; + + mutex_lock(&priv->mutex); + + if (!iwl_is_ready(priv)) { + IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); + ret = -EIO; + goto out; + } + + IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n", + conf->channel->hw_value, changed); + + if (unlikely(!priv->cfg->mod_params->disable_hw_scan && + test_bit(STATUS_SCANNING, &priv->status))) { + scan_active = 1; + IWL_DEBUG_MAC80211(priv, "leave - scanning\n"); + } + + + /* during scanning mac80211 will delay channel setting until + * scan finish with changed = 0 + */ + if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) { + if (scan_active) + goto set_ch_out; + + ch = ieee80211_frequency_to_channel(conf->channel->center_freq); + ch_info = iwl_get_channel_info(priv, conf->channel->band, ch); + if (!is_channel_valid(ch_info)) { + IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n"); + ret = -EINVAL; + goto set_ch_out; + } + + if (priv->iw_mode == NL80211_IFTYPE_ADHOC && + !is_channel_ibss(ch_info)) { + IWL_ERR(priv, "channel %d in band %d not " + "IBSS channel\n", + conf->channel->hw_value, conf->channel->band); + ret = -EINVAL; + goto set_ch_out; + } + + priv->current_ht_config.is_ht = conf_is_ht(conf); + + spin_lock_irqsave(&priv->lock, flags); + + + /* if we are switching from ht to 2.4 clear flags + * from any ht related info since 2.4 does not + * support ht */ + if ((le16_to_cpu(priv->staging_rxon.channel) != ch)) + priv->staging_rxon.flags = 0; + + iwl_set_rxon_channel(priv, conf->channel); + + iwl_set_flags_for_band(priv, conf->channel->band); + spin_unlock_irqrestore(&priv->lock, flags); + set_ch_out: + /* The list of supported rates and rate mask can be different + * for each band; since the band may have changed, reset + * the rate mask to what mac80211 lists */ + iwl_set_rate(priv); + } + + if (changed & IEEE80211_CONF_CHANGE_PS) { + if (conf->flags & IEEE80211_CONF_PS) + ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3); + else + ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM); + if (ret) + IWL_DEBUG_MAC80211(priv, "Error setting power level\n"); + + } + + if (changed & IEEE80211_CONF_CHANGE_POWER) { + IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n", + priv->tx_power_user_lmt, conf->power_level); + + iwl_set_tx_power(priv, conf->power_level, false); + } + + /* call to ensure that 4965 rx_chain is set properly in monitor mode */ + if (priv->cfg->ops->hcmd->set_rxon_chain) + priv->cfg->ops->hcmd->set_rxon_chain(priv); + + if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) { + if (conf->radio_enabled && + iwl_radio_kill_sw_enable_radio(priv)) { + IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - " + "waiting for uCode\n"); + goto out; + } + + if (!conf->radio_enabled) + iwl_radio_kill_sw_disable_radio(priv); + } + + if (!conf->radio_enabled) { + IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n"); + goto out; + } + + if (scan_active) + goto out; + + if (memcmp(&priv->active_rxon, + &priv->staging_rxon, sizeof(priv->staging_rxon))) + iwlcore_commit_rxon(priv); + else + IWL_DEBUG_INFO(priv, "Not re-sending same RXON configuration.\n"); + + +out: + IWL_DEBUG_MAC80211(priv, "leave\n"); + mutex_unlock(&priv->mutex); + return ret; +} +EXPORT_SYMBOL(iwl_mac_config); + #ifdef CONFIG_PM int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 5dc33065f0ba..da8fae52a5d6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -278,6 +278,7 @@ int iwl_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf); void iwl_mac_remove_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf); +int iwl_mac_config(struct ieee80211_hw *hw, u32 changed); /***************************************************** * RX handlers. diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index f82a9dc82eef..c5644a5e50c9 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -3166,8 +3166,6 @@ static void iwl3945_bg_rx_replenish(struct work_struct *data) mutex_unlock(&priv->mutex); } -static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed); - #define IWL_DELAY_NEXT_SCAN (HZ*2) void iwl3945_post_associate(struct iwl_priv *priv) @@ -3380,108 +3378,6 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) return NETDEV_TX_OK; } -/** - * iwl3945_mac_config - mac80211 config callback - * - * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to - * be set inappropriately and the driver currently sets the hardware up to - * use it whenever needed. - */ -static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed) -{ - struct iwl_priv *priv = hw->priv; - const struct iwl_channel_info *ch_info; - struct ieee80211_conf *conf = &hw->conf; - unsigned long flags; - int ret = 0; - - mutex_lock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "enter to channel %d\n", - conf->channel->hw_value); - - if (!iwl_is_ready(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); - ret = -EIO; - goto out; - } - - if (unlikely(!iwl3945_mod_params.disable_hw_scan && - test_bit(STATUS_SCANNING, &priv->status))) { - IWL_DEBUG_MAC80211(priv, "leave - scanning\n"); - set_bit(STATUS_CONF_PENDING, &priv->status); - mutex_unlock(&priv->mutex); - return 0; - } - - spin_lock_irqsave(&priv->lock, flags); - - ch_info = iwl_get_channel_info(priv, conf->channel->band, - conf->channel->hw_value); - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_SCAN(priv, - "Channel %d [%d] is INVALID for this band.\n", - conf->channel->hw_value, conf->channel->band); - IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n"); - spin_unlock_irqrestore(&priv->lock, flags); - ret = -EINVAL; - goto out; - } - - iwl_set_rxon_channel(priv, conf->channel); - - iwl_set_flags_for_band(priv, conf->channel->band); - - /* The list of supported rates and rate mask can be different - * for each phymode; since the phymode may have changed, reset - * the rate mask to what mac80211 lists */ - iwl_set_rate(priv); - - spin_unlock_irqrestore(&priv->lock, flags); - -#ifdef IEEE80211_CONF_CHANNEL_SWITCH - if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) { - iwl3945_hw_channel_switch(priv, conf->channel); - goto out; - } -#endif - - if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) { - if (conf->radio_enabled && - iwl_radio_kill_sw_enable_radio(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - " - "waiting for uCode\n"); - goto out; - } - - if (!conf->radio_enabled) { - iwl_radio_kill_sw_disable_radio(priv); - IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n"); - goto out; - } - } - - if (iwl_is_rfkill(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - RF kill\n"); - ret = -EIO; - goto out; - } - - iwl_set_rate(priv); - - if (memcmp(&priv->active_rxon, - &priv->staging_rxon, sizeof(priv->staging_rxon))) - iwlcore_commit_rxon(priv); - else - IWL_DEBUG_INFO(priv, "Not re-sending same RXON configuration\n"); - - IWL_DEBUG_MAC80211(priv, "leave\n"); - -out: - clear_bit(STATUS_CONF_PENDING, &priv->status); - mutex_unlock(&priv->mutex); - return ret; -} - static void iwl3945_config_ap(struct iwl_priv *priv) { int rc = 0; @@ -4316,7 +4212,7 @@ static struct ieee80211_ops iwl3945_hw_ops = { .stop = iwl3945_mac_stop, .add_interface = iwl_mac_add_interface, .remove_interface = iwl_mac_remove_interface, - .config = iwl3945_mac_config, + .config = iwl_mac_config, .config_interface = iwl3945_mac_config_interface, .configure_filter = iwl_configure_filter, .set_key = iwl3945_mac_set_key,