From: Jiri Kosina Date: Mon, 23 May 2011 10:49:25 +0000 (+0200) Subject: Merge branches 'doc', 'multitouch', 'upstream' and 'upstream-fixes' into for-linus X-Git-Tag: v3.0-rc1~345^2 X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=commitdiff_plain;h=366a2382c68d01638350efcf23d46a47d661c595;hp=6cb4b040795c555c7ab4b1ba29b0dba2b5a42beb Merge branches 'doc', 'multitouch', 'upstream' and 'upstream-fixes' into for-linus --- diff --git a/Documentation/usb/hiddev.txt b/Documentation/hid/hiddev.txt similarity index 100% rename from Documentation/usb/hiddev.txt rename to Documentation/hid/hiddev.txt diff --git a/Documentation/hid/hidraw.txt b/Documentation/hid/hidraw.txt new file mode 100644 index 000000000000..029e6cb9a7e8 --- /dev/null +++ b/Documentation/hid/hidraw.txt @@ -0,0 +1,119 @@ + HIDRAW - Raw Access to USB and Bluetooth Human Interface Devices + ================================================================== + +The hidraw driver provides a raw interface to USB and Bluetooth Human +Interface Devices (HIDs). It differs from hiddev in that reports sent and +received are not parsed by the HID parser, but are sent to and received from +the device unmodified. + +Hidraw should be used if the userspace application knows exactly how to +communicate with the hardware device, and is able to construct the HID +reports manually. This is often the case when making userspace drivers for +custom HID devices. + +Hidraw is also useful for communicating with non-conformant HID devices +which send and receive data in a way that is inconsistent with their report +descriptors. Because hiddev parses reports which are sent and received +through it, checking them against the device's report descriptor, such +communication with these non-conformant devices is impossible using hiddev. +Hidraw is the only alternative, short of writing a custom kernel driver, for +these non-conformant devices. + +A benefit of hidraw is that its use by userspace applications is independent +of the underlying hardware type. Currently, Hidraw is implemented for USB +and Bluetooth. In the future, as new hardware bus types are developed which +use the HID specification, hidraw will be expanded to add support for these +new bus types. + +Hidraw uses a dynamic major number, meaning that udev should be relied on to +create hidraw device nodes. Udev will typically create the device nodes +directly under /dev (eg: /dev/hidraw0). As this location is distribution- +and udev rule-dependent, applications should use libudev to locate hidraw +devices attached to the system. There is a tutorial on libudev with a +working example at: + http://www.signal11.us/oss/udev/ + +The HIDRAW API +--------------- + +read() +------- +read() will read a queued report received from the HID device. On USB +devices, the reports read using read() are the reports sent from the device +on the INTERRUPT IN endpoint. By default, read() will block until there is +a report available to be read. read() can be made non-blocking, by passing +the O_NONBLOCK flag to open(), or by setting the O_NONBLOCK flag using +fcntl(). + +On a device which uses numbered reports, the first byte of the returned data +will be the report number; the report data follows, beginning in the second +byte. For devices which do not use numbered reports, the report data +will begin at the first byte. + +write() +-------- +The write() function will write a report to the device. For USB devices, if +the device has an INTERRUPT OUT endpoint, the report will be sent on that +endpoint. If it does not, the report will be sent over the control endpoint, +using a SET_REPORT transfer. + +The first byte of the buffer passed to write() should be set to the report +number. If the device does not use numbered reports, the first byte should +be set to 0. The report data itself should begin at the second byte. + +ioctl() +-------- +Hidraw supports the following ioctls: + +HIDIOCGRDESCSIZE: Get Report Descriptor Size +This ioctl will get the size of the device's report descriptor. + +HIDIOCGRDESC: Get Report Descriptor +This ioctl returns the device's report descriptor using a +hidraw_report_descriptor struct. Make sure to set the size field of the +hidraw_report_descriptor struct to the size returned from HIDIOCGRDESCSIZE. + +HIDIOCGRAWINFO: Get Raw Info +This ioctl will return a hidraw_devinfo struct containing the bus type, the +vendor ID (VID), and product ID (PID) of the device. The bus type can be one +of: + BUS_USB + BUS_HIL + BUS_BLUETOOTH + BUS_VIRTUAL +which are defined in linux/input.h. + +HIDIOCGRAWNAME(len): Get Raw Name +This ioctl returns a string containing the vendor and product strings of +the device. The returned string is Unicode, UTF-8 encoded. + +HIDIOCGRAWPHYS(len): Get Physical Address +This ioctl returns a string representing the physical address of the device. +For USB devices, the string contains the physical path to the device (the +USB controller, hubs, ports, etc). For Bluetooth devices, the string +contains the hardware (MAC) address of the device. + +HIDIOCSFEATURE(len): Send a Feature Report +This ioctl will send a feature report to the device. Per the HID +specification, feature reports are always sent using the control endpoint. +Set the first byte of the supplied buffer to the report number. For devices +which do not use numbered reports, set the first byte to 0. The report data +begins in the second byte. Make sure to set len accordingly, to one more +than the length of the report (to account for the report number). + +HIDIOCGFEATURE(len): Get a Feature Report +This ioctl will request a feature report from the device using the control +endpoint. The first byte of the supplied buffer should be set to the report +number of the requested report. For devices which do not use numbered +reports, set the first byte to 0. The report will be returned starting at +the first byte of the buffer (ie: the report number is not returned). + +Example +--------- +In samples/, find hid-example.c, which shows examples of read(), write(), +and all the ioctls for hidraw. The code may be used by anyone for any +purpose, and can serve as a starting point for developing applications using +hidraw. + +Document by: + Alan Ott , Signal 11 Software diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 9de9e97149ec..67d2a7585934 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -55,12 +55,6 @@ source "drivers/hid/usbhid/Kconfig" menu "Special HID drivers" depends on HID -config HID_3M_PCT - tristate "3M PCT touchscreen" - depends on USB_HID - ---help--- - Support for 3M PCT touch screens. - config HID_A4TECH tristate "A4 tech mice" if EXPERT depends on USB_HID @@ -100,12 +94,6 @@ config HID_BELKIN ---help--- Support for Belkin Flip KVM and Wireless keyboard. -config HID_CANDO - tristate "Cando dual touch panel" - depends on USB_HID - ---help--- - Support for Cando dual touch panel. - config HID_CHERRY tristate "Cherry Cymotion keyboard" if EXPERT depends on USB_HID @@ -300,12 +288,6 @@ config HID_MICROSOFT ---help--- Support for Microsoft devices that are not fully compliant with HID standard. -config HID_MOSART - tristate "MosArt dual-touch panels" - depends on USB_HID - ---help--- - Support for MosArt dual-touch panels. - config HID_MONTEREY tristate "Monterey Genius KB29E keyboard" if EXPERT depends on USB_HID @@ -320,13 +302,25 @@ config HID_MULTITOUCH Generic support for HID multitouch panels. Say Y here if you have one of the following devices: + - 3M PCT touch screens + - ActionStar dual touch panels + - Cando dual touch panels + - CVTouch panels - Cypress TrueTouch panels + - Elo TouchSystems IntelliTouch Plus panels + - GeneralTouch 'Sensing Win7-TwoFinger' panels + - GoodTouch panels - Hanvon dual touch panels + - Ilitek dual touch panels - IrTouch Infrared USB panels + - Lumio CrystalTouch panels + - MosArt dual-touch panels + - PenMount dual touch panels - Pixcir dual touch panels - - 'Sensing Win7-TwoFinger' panel by GeneralTouch - - eGalax dual-touch panels, including the - Joojoo and Wetab tablets + - eGalax dual-touch panels, including the Joojoo and Wetab tablets + - Stantum multitouch panels + - Touch International Panels + - Unitec Panels If unsure, say N. @@ -500,12 +494,6 @@ config HID_SONY ---help--- Support for Sony PS3 controller. -config HID_STANTUM - tristate "Stantum multitouch panel" - depends on USB_HID - ---help--- - Support for Stantum multitouch panel. - config HID_SUNPLUS tristate "Sunplus wireless desktop" depends on USB_HID diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index 06c68ae3abee..f8cc4ea7335a 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -25,12 +25,10 @@ ifdef CONFIG_LOGIWII_FF hid-logitech-y += hid-lg4ff.o endif -obj-$(CONFIG_HID_3M_PCT) += hid-3m-pct.o obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o obj-$(CONFIG_HID_ACRUX) += hid-axff.o obj-$(CONFIG_HID_APPLE) += hid-apple.o obj-$(CONFIG_HID_BELKIN) += hid-belkin.o -obj-$(CONFIG_HID_CANDO) += hid-cando.o obj-$(CONFIG_HID_CHERRY) += hid-cherry.o obj-$(CONFIG_HID_CHICONY) += hid-chicony.o obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o @@ -47,7 +45,6 @@ obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o obj-$(CONFIG_HID_MAGICMOUSE) += hid-magicmouse.o obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o -obj-$(CONFIG_HID_MOSART) += hid-mosart.o obj-$(CONFIG_HID_MULTITOUCH) += hid-multitouch.o obj-$(CONFIG_HID_NTRIG) += hid-ntrig.o obj-$(CONFIG_HID_ORTEK) += hid-ortek.o @@ -66,7 +63,6 @@ obj-$(CONFIG_HID_ROCCAT_PYRA) += hid-roccat-pyra.o obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o obj-$(CONFIG_HID_SONY) += hid-sony.o -obj-$(CONFIG_HID_STANTUM) += hid-stantum.o obj-$(CONFIG_HID_SUNPLUS) += hid-sunplus.o obj-$(CONFIG_HID_GREENASIA) += hid-gaff.o obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o diff --git a/drivers/hid/hid-3m-pct.c b/drivers/hid/hid-3m-pct.c deleted file mode 100644 index 5243ae2d3730..000000000000 --- a/drivers/hid/hid-3m-pct.c +++ /dev/null @@ -1,305 +0,0 @@ -/* - * HID driver for 3M PCT multitouch panels - * - * Copyright (c) 2009-2010 Stephane Chatty - * Copyright (c) 2010 Henrik Rydberg - * Copyright (c) 2010 Canonical, Ltd. - * - */ - -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - */ - -#include -#include -#include -#include -#include -#include - -MODULE_AUTHOR("Stephane Chatty "); -MODULE_DESCRIPTION("3M PCT multitouch panels"); -MODULE_LICENSE("GPL"); - -#include "hid-ids.h" - -#define MAX_SLOTS 60 - -/* estimated signal-to-noise ratios */ -#define SN_MOVE 2048 -#define SN_WIDTH 128 - -struct mmm_finger { - __s32 x, y, w, h; - bool touch, valid; -}; - -struct mmm_data { - struct mmm_finger f[MAX_SLOTS]; - __u8 curid; - __u8 nexp, nreal; - bool touch, valid; -}; - -static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi, - struct hid_field *field, struct hid_usage *usage, - unsigned long **bit, int *max) -{ - int f1 = field->logical_minimum; - int f2 = field->logical_maximum; - int df = f2 - f1; - - switch (usage->hid & HID_USAGE_PAGE) { - - case HID_UP_BUTTON: - return -1; - - case HID_UP_GENDESK: - switch (usage->hid) { - case HID_GD_X: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_POSITION_X); - input_set_abs_params(hi->input, ABS_MT_POSITION_X, - f1, f2, df / SN_MOVE, 0); - /* touchscreen emulation */ - input_set_abs_params(hi->input, ABS_X, - f1, f2, df / SN_MOVE, 0); - return 1; - case HID_GD_Y: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_POSITION_Y); - input_set_abs_params(hi->input, ABS_MT_POSITION_Y, - f1, f2, df / SN_MOVE, 0); - /* touchscreen emulation */ - input_set_abs_params(hi->input, ABS_Y, - f1, f2, df / SN_MOVE, 0); - return 1; - } - return 0; - - case HID_UP_DIGITIZER: - switch (usage->hid) { - /* we do not want to map these: no input-oriented meaning */ - case 0x14: - case 0x23: - case HID_DG_INPUTMODE: - case HID_DG_DEVICEINDEX: - case HID_DG_CONTACTCOUNT: - case HID_DG_CONTACTMAX: - case HID_DG_INRANGE: - case HID_DG_CONFIDENCE: - return -1; - case HID_DG_TIPSWITCH: - /* touchscreen emulation */ - hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); - input_set_capability(hi->input, EV_KEY, BTN_TOUCH); - return 1; - case HID_DG_WIDTH: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_TOUCH_MAJOR); - input_set_abs_params(hi->input, ABS_MT_TOUCH_MAJOR, - f1, f2, df / SN_WIDTH, 0); - return 1; - case HID_DG_HEIGHT: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_TOUCH_MINOR); - input_set_abs_params(hi->input, ABS_MT_TOUCH_MINOR, - f1, f2, df / SN_WIDTH, 0); - input_set_abs_params(hi->input, ABS_MT_ORIENTATION, - 0, 1, 0, 0); - return 1; - case HID_DG_CONTACTID: - input_mt_init_slots(hi->input, MAX_SLOTS); - return 1; - } - /* let hid-input decide for the others */ - return 0; - - case 0xff000000: - /* we do not want to map these: no input-oriented meaning */ - return -1; - } - - return 0; -} - -static int mmm_input_mapped(struct hid_device *hdev, struct hid_input *hi, - struct hid_field *field, struct hid_usage *usage, - unsigned long **bit, int *max) -{ - /* tell hid-input to skip setup of these event types */ - if (usage->type == EV_KEY || usage->type == EV_ABS) - set_bit(usage->type, hi->input->evbit); - return -1; -} - -/* - * this function is called when a whole packet has been received and processed, - * so that it can decide what to send to the input layer. - */ -static void mmm_filter_event(struct mmm_data *md, struct input_dev *input) -{ - int i; - for (i = 0; i < MAX_SLOTS; ++i) { - struct mmm_finger *f = &md->f[i]; - if (!f->valid) { - /* this finger is just placeholder data, ignore */ - continue; - } - input_mt_slot(input, i); - input_mt_report_slot_state(input, MT_TOOL_FINGER, f->touch); - if (f->touch) { - /* this finger is on the screen */ - int wide = (f->w > f->h); - /* divided by two to match visual scale of touch */ - int major = max(f->w, f->h) >> 1; - int minor = min(f->w, f->h) >> 1; - - input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x); - input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y); - input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide); - input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major); - input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor); - } - f->valid = 0; - } - - input_mt_report_pointer_emulation(input, true); - input_sync(input); -} - -/* - * this function is called upon all reports - * so that we can accumulate contact point information, - * and call input_mt_sync after each point. - */ -static int mmm_event(struct hid_device *hid, struct hid_field *field, - struct hid_usage *usage, __s32 value) -{ - struct mmm_data *md = hid_get_drvdata(hid); - /* - * strangely, this function can be called before - * field->hidinput is initialized! - */ - if (hid->claimed & HID_CLAIMED_INPUT) { - struct input_dev *input = field->hidinput->input; - switch (usage->hid) { - case HID_DG_TIPSWITCH: - md->touch = value; - break; - case HID_DG_CONFIDENCE: - md->valid = value; - break; - case HID_DG_WIDTH: - if (md->valid) - md->f[md->curid].w = value; - break; - case HID_DG_HEIGHT: - if (md->valid) - md->f[md->curid].h = value; - break; - case HID_DG_CONTACTID: - value = clamp_val(value, 0, MAX_SLOTS - 1); - if (md->valid) { - md->curid = value; - md->f[value].touch = md->touch; - md->f[value].valid = 1; - md->nreal++; - } - break; - case HID_GD_X: - if (md->valid) - md->f[md->curid].x = value; - break; - case HID_GD_Y: - if (md->valid) - md->f[md->curid].y = value; - break; - case HID_DG_CONTACTCOUNT: - if (value) - md->nexp = value; - if (md->nreal >= md->nexp) { - mmm_filter_event(md, input); - md->nreal = 0; - } - break; - } - } - - /* we have handled the hidinput part, now remains hiddev */ - if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event) - hid->hiddev_hid_event(hid, field, usage, value); - - return 1; -} - -static int mmm_probe(struct hid_device *hdev, const struct hid_device_id *id) -{ - int ret; - struct mmm_data *md; - - hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC; - - md = kzalloc(sizeof(struct mmm_data), GFP_KERNEL); - if (!md) { - hid_err(hdev, "cannot allocate 3M data\n"); - return -ENOMEM; - } - hid_set_drvdata(hdev, md); - - ret = hid_parse(hdev); - if (!ret) - ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); - - if (ret) - kfree(md); - return ret; -} - -static void mmm_remove(struct hid_device *hdev) -{ - hid_hw_stop(hdev); - kfree(hid_get_drvdata(hdev)); - hid_set_drvdata(hdev, NULL); -} - -static const struct hid_device_id mmm_devices[] = { - { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) }, - { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M2256) }, - { } -}; -MODULE_DEVICE_TABLE(hid, mmm_devices); - -static const struct hid_usage_id mmm_grabbed_usages[] = { - { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID }, - { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1} -}; - -static struct hid_driver mmm_driver = { - .name = "3m-pct", - .id_table = mmm_devices, - .probe = mmm_probe, - .remove = mmm_remove, - .input_mapping = mmm_input_mapping, - .input_mapped = mmm_input_mapped, - .usage_table = mmm_grabbed_usages, - .event = mmm_event, -}; - -static int __init mmm_init(void) -{ - return hid_register_driver(&mmm_driver); -} - -static void __exit mmm_exit(void) -{ - hid_unregister_driver(&mmm_driver); -} - -module_init(mmm_init); -module_exit(mmm_exit); - diff --git a/drivers/hid/hid-cando.c b/drivers/hid/hid-cando.c deleted file mode 100644 index 1ea066c55201..000000000000 --- a/drivers/hid/hid-cando.c +++ /dev/null @@ -1,276 +0,0 @@ -/* - * HID driver for Cando dual-touch panels - * - * Copyright (c) 2010 Stephane Chatty - * - */ - -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - */ - -#include -#include -#include -#include - -MODULE_AUTHOR("Stephane Chatty "); -MODULE_DESCRIPTION("Cando dual-touch panel"); -MODULE_LICENSE("GPL"); - -#include "hid-ids.h" - -struct cando_data { - __u16 x, y; - __u8 id; - __s8 oldest; /* id of the oldest finger in previous frame */ - bool valid; /* valid finger data, or just placeholder? */ - bool first; /* is this the first finger in this frame? */ - __s8 firstid; /* id of the first finger in the frame */ - __u16 firstx, firsty; /* (x, y) of the first finger in the frame */ -}; - -static int cando_input_mapping(struct hid_device *hdev, struct hid_input *hi, - struct hid_field *field, struct hid_usage *usage, - unsigned long **bit, int *max) -{ - switch (usage->hid & HID_USAGE_PAGE) { - - case HID_UP_GENDESK: - switch (usage->hid) { - case HID_GD_X: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_POSITION_X); - /* touchscreen emulation */ - input_set_abs_params(hi->input, ABS_X, - field->logical_minimum, - field->logical_maximum, 0, 0); - return 1; - case HID_GD_Y: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_POSITION_Y); - /* touchscreen emulation */ - input_set_abs_params(hi->input, ABS_Y, - field->logical_minimum, - field->logical_maximum, 0, 0); - return 1; - } - return 0; - - case HID_UP_DIGITIZER: - switch (usage->hid) { - case HID_DG_TIPSWITCH: - case HID_DG_CONTACTMAX: - return -1; - case HID_DG_INRANGE: - /* touchscreen emulation */ - hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); - return 1; - case HID_DG_CONTACTID: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_TRACKING_ID); - return 1; - } - return 0; - } - - return 0; -} - -static int cando_input_mapped(struct hid_device *hdev, struct hid_input *hi, - struct hid_field *field, struct hid_usage *usage, - unsigned long **bit, int *max) -{ - if (usage->type == EV_KEY || usage->type == EV_ABS) - clear_bit(usage->code, *bit); - - return 0; -} - -/* - * this function is called when a whole finger has been parsed, - * so that it can decide what to send to the input layer. - */ -static void cando_filter_event(struct cando_data *td, struct input_dev *input) -{ - td->first = !td->first; /* touchscreen emulation */ - - if (!td->valid) { - /* - * touchscreen emulation: if this is the second finger and - * the first was valid, the first was the oldest; if the - * first was not valid and there was a valid finger in the - * previous frame, this is a release. - */ - if (td->first) { - td->firstid = -1; - } else if (td->firstid >= 0) { - input_event(input, EV_ABS, ABS_X, td->firstx); - input_event(input, EV_ABS, ABS_Y, td->firsty); - td->oldest = td->firstid; - } else if (td->oldest >= 0) { - input_event(input, EV_KEY, BTN_TOUCH, 0); - td->oldest = -1; - } - - return; - } - - input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id); - input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x); - input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y); - - input_mt_sync(input); - - /* - * touchscreen emulation: if there was no touching finger previously, - * emit touch event - */ - if (td->oldest < 0) { - input_event(input, EV_KEY, BTN_TOUCH, 1); - td->oldest = td->id; - } - - /* - * touchscreen emulation: if this is the first finger, wait for the - * second; the oldest is then the second if it was the oldest already - * or if there was no first, the first otherwise. - */ - if (td->first) { - td->firstx = td->x; - td->firsty = td->y; - td->firstid = td->id; - } else { - int x, y, oldest; - if (td->id == td->oldest || td->firstid < 0) { - x = td->x; - y = td->y; - oldest = td->id; - } else { - x = td->firstx; - y = td->firsty; - oldest = td->firstid; - } - input_event(input, EV_ABS, ABS_X, x); - input_event(input, EV_ABS, ABS_Y, y); - td->oldest = oldest; - } -} - - -static int cando_event(struct hid_device *hid, struct hid_field *field, - struct hid_usage *usage, __s32 value) -{ - struct cando_data *td = hid_get_drvdata(hid); - - if (hid->claimed & HID_CLAIMED_INPUT) { - struct input_dev *input = field->hidinput->input; - - switch (usage->hid) { - case HID_DG_INRANGE: - td->valid = value; - break; - case HID_DG_CONTACTID: - td->id = value; - break; - case HID_GD_X: - td->x = value; - break; - case HID_GD_Y: - td->y = value; - cando_filter_event(td, input); - break; - case HID_DG_TIPSWITCH: - /* avoid interference from generic hidinput handling */ - break; - - default: - /* fallback to the generic hidinput handling */ - return 0; - } - } - - /* we have handled the hidinput part, now remains hiddev */ - if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event) - hid->hiddev_hid_event(hid, field, usage, value); - - return 1; -} - -static int cando_probe(struct hid_device *hdev, const struct hid_device_id *id) -{ - int ret; - struct cando_data *td; - - td = kmalloc(sizeof(struct cando_data), GFP_KERNEL); - if (!td) { - hid_err(hdev, "cannot allocate Cando Touch data\n"); - return -ENOMEM; - } - hid_set_drvdata(hdev, td); - td->first = false; - td->oldest = -1; - td->valid = false; - - ret = hid_parse(hdev); - if (!ret) - ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); - - if (ret) - kfree(td); - - return ret; -} - -static void cando_remove(struct hid_device *hdev) -{ - hid_hw_stop(hdev); - kfree(hid_get_drvdata(hdev)); - hid_set_drvdata(hdev, NULL); -} - -static const struct hid_device_id cando_devices[] = { - { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, - USB_DEVICE_ID_CANDO_MULTI_TOUCH) }, - { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, - USB_DEVICE_ID_CANDO_MULTI_TOUCH_10_1) }, - { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, - USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) }, - { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, - USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) }, - { } -}; -MODULE_DEVICE_TABLE(hid, cando_devices); - -static const struct hid_usage_id cando_grabbed_usages[] = { - { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID }, - { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1} -}; - -static struct hid_driver cando_driver = { - .name = "cando-touch", - .id_table = cando_devices, - .probe = cando_probe, - .remove = cando_remove, - .input_mapping = cando_input_mapping, - .input_mapped = cando_input_mapped, - .usage_table = cando_grabbed_usages, - .event = cando_event, -}; - -static int __init cando_init(void) -{ - return hid_register_driver(&cando_driver); -} - -static void __exit cando_exit(void) -{ - hid_unregister_driver(&cando_driver); -} - -module_init(cando_init); -module_exit(cando_exit); - diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 408c4bea4d8d..4140fd271417 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1045,6 +1045,9 @@ void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size, rsize = ((report->size - 1) >> 3) + 1; + if (rsize > HID_MAX_BUFFER_SIZE) + rsize = HID_MAX_BUFFER_SIZE; + if (csize < rsize) { dbg_hid("report %d is too short, (%d < %d)\n", report->id, csize, rsize); @@ -1290,6 +1293,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_RP_649) }, { HID_USB_DEVICE(USB_VENDOR_ID_ACRUX, 0x0802) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ACTIONSTAR, USB_DEVICE_ID_ACTIONSTAR_1011) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) }, @@ -1356,6 +1360,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) }, { HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH, USB_DEVICE_ID_CVTOUCH_SCREEN) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) }, @@ -1369,17 +1374,20 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH3) }, { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH4) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2515) }, { HID_USB_DEVICE(USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II) }, { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GOODTOUCH, USB_DEVICE_ID_GOODTOUCH_000f) }, { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0012) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_3) }, { HID_USB_DEVICE(USB_VENDOR_ID_HANVON, USB_DEVICE_ID_HANVON_MULTITOUCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ILITEK, USB_DEVICE_ID_ILITEK_MULTITOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_IRTOUCHSYSTEMS, USB_DEVICE_ID_IRTOUCH_INFRARED_USB) }, { HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) }, { HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) }, @@ -1408,10 +1416,12 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_DFP_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G27_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WII_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) }, @@ -1441,6 +1451,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18) }, { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_PKB1700) }, { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) }, + { HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_PCI) }, { HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) }, @@ -1454,6 +1465,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) }, @@ -1470,12 +1482,15 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_TOUCH_INTL, USB_DEVICE_ID_TOUCH_INTL_MULTI_TOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U) }, + { HID_USB_DEVICE(USB_VENDOR_ID_UNITEC, USB_DEVICE_ID_UNITEC_USB_TOUCH_0709) }, + { HID_USB_DEVICE(USB_VENDOR_ID_UNITEC, USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 00a94b535d28..e715c43aa013 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -37,6 +37,9 @@ #define USB_VENDOR_ID_ACRUX 0x1a34 +#define USB_VENDOR_ID_ACTIONSTAR 0x2101 +#define USB_DEVICE_ID_ACTIONSTAR_1011 0x1011 + #define USB_VENDOR_ID_ADS_TECH 0x06e1 #define USB_DEVICE_ID_ADS_TECH_RADIO_SI470X 0xa155 @@ -182,6 +185,9 @@ #define USB_VENDOR_ID_CREATIVELABS 0x041e #define USB_DEVICE_ID_PRODIKEYS_PCMIDI 0x2801 +#define USB_VENDOR_ID_CVTOUCH 0x1ff7 +#define USB_DEVICE_ID_CVTOUCH_SCREEN 0x0013 + #define USB_VENDOR_ID_CYGNAL 0x10c4 #define USB_DEVICE_ID_CYGNAL_RADIO_SI470X 0x818a @@ -220,6 +226,7 @@ #define USB_VENDOR_ID_DREAM_CHEEKY 0x1d34 #define USB_VENDOR_ID_ELO 0x04E7 +#define USB_DEVICE_ID_ELO_TS2515 0x0022 #define USB_DEVICE_ID_ELO_TS2700 0x0020 #define USB_VENDOR_ID_EMS 0x2006 @@ -255,6 +262,9 @@ #define USB_DEVICE_ID_0_8_8_IF_KIT 0x0053 #define USB_DEVICE_ID_PHIDGET_MOTORCONTROL 0x0058 +#define USB_VENDOR_ID_GOODTOUCH 0x1aad +#define USB_DEVICE_ID_GOODTOUCH_000f 0x000f + #define USB_VENDOR_ID_GOTOP 0x08f2 #define USB_DEVICE_ID_SUPER_Q2 0x007f #define USB_DEVICE_ID_GOGOPEN 0x00ce @@ -334,6 +344,9 @@ #define USB_DEVICE_ID_UGCI_FLYING 0x0020 #define USB_DEVICE_ID_UGCI_FIGHTING 0x0030 +#define USB_VENDOR_ID_ILITEK 0x222a +#define USB_DEVICE_ID_ILITEK_MULTITOUCH 0x0001 + #define USB_VENDOR_ID_IMATION 0x0718 #define USB_DEVICE_ID_DISC_STAKKA 0xd000 @@ -398,6 +411,7 @@ #define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL 0xc295 #define USB_DEVICE_ID_LOGITECH_DFP_WHEEL 0xc298 #define USB_DEVICE_ID_LOGITECH_G25_WHEEL 0xc299 +#define USB_DEVICE_ID_LOGITECH_G27_WHEEL 0xc29b #define USB_DEVICE_ID_LOGITECH_WII_WHEEL 0xc29c #define USB_DEVICE_ID_LOGITECH_ELITE_KBD 0xc30a #define USB_DEVICE_ID_S510_RECEIVER 0xc50c @@ -411,6 +425,9 @@ #define USB_DEVICE_ID_DINOVO_MINI 0xc71f #define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2 0xca03 +#define USB_VENDOR_ID_LUMIO 0x202e +#define USB_DEVICE_ID_CRYSTALTOUCH 0x0006 + #define USB_VENDOR_ID_MCC 0x09db #define USB_DEVICE_ID_MCC_PMD1024LS 0x0076 #define USB_DEVICE_ID_MCC_PMD1208LS 0x007a @@ -488,6 +505,9 @@ #define USB_VENDOR_ID_PANTHERLORD 0x0810 #define USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK 0x0001 +#define USB_VENDOR_ID_PENMOUNT 0x14e1 +#define USB_DEVICE_ID_PENMOUNT_PCI 0x3500 + #define USB_VENDOR_ID_PETALYNX 0x18b1 #define USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE 0x0037 @@ -531,6 +551,7 @@ #define USB_VENDOR_ID_SONY 0x054c #define USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE 0x024b #define USB_DEVICE_ID_SONY_PS3_CONTROLLER 0x0268 +#define USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER 0x042f #define USB_VENDOR_ID_SOUNDGRAPH 0x15c2 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_FIRST 0x0034 @@ -551,6 +572,10 @@ #define USB_VENDOR_ID_SUNPLUS 0x04fc #define USB_DEVICE_ID_SUNPLUS_WDESKTOP 0x05d8 +#define USB_VENDOR_ID_SYMBOL 0x05e0 +#define USB_DEVICE_ID_SYMBOL_SCANNER_1 0x0800 +#define USB_DEVICE_ID_SYMBOL_SCANNER_2 0x1300 + #define USB_VENDOR_ID_THRUSTMASTER 0x044f #define USB_VENDOR_ID_TOPSEED 0x0766 @@ -562,6 +587,9 @@ #define USB_VENDOR_ID_TOPMAX 0x0663 #define USB_DEVICE_ID_TOPMAX_COBRAPAD 0x0103 +#define USB_VENDOR_ID_TOUCH_INTL 0x1e5e +#define USB_DEVICE_ID_TOUCH_INTL_MULTI_TOUCH 0x0313 + #define USB_VENDOR_ID_TOUCHPACK 0x1bfd #define USB_DEVICE_ID_TOUCHPACK_RTS 0x1688 @@ -579,6 +607,10 @@ #define USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U 0x0004 #define USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U 0x0005 +#define USB_VENDOR_ID_UNITEC 0x227d +#define USB_DEVICE_ID_UNITEC_USB_TOUCH_0709 0x0709 +#define USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19 0x0a19 + #define USB_VENDOR_ID_VERNIER 0x08f7 #define USB_DEVICE_ID_VERNIER_LABPRO 0x0001 #define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002 diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c index 3da90402ee81..21f205f09250 100644 --- a/drivers/hid/hid-lg.c +++ b/drivers/hid/hid-lg.c @@ -377,6 +377,8 @@ static const struct hid_device_id lg_devices[] = { .driver_data = LG_FF }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL), .driver_data = LG_FF }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G27_WHEEL), + .driver_data = LG_FF }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_DFP_WHEEL), .driver_data = LG_FF }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WII_WHEEL), diff --git a/drivers/hid/hid-lgff.c b/drivers/hid/hid-lgff.c index f099079ca6b9..088f85049290 100644 --- a/drivers/hid/hid-lgff.c +++ b/drivers/hid/hid-lgff.c @@ -72,6 +72,9 @@ static const struct dev_type devices[] = { { 0x046d, 0xc287, ff_joystick_ac }, { 0x046d, 0xc293, ff_joystick }, { 0x046d, 0xc294, ff_wheel }, + { 0x046d, 0xc298, ff_wheel }, + { 0x046d, 0xc299, ff_wheel }, + { 0x046d, 0xc29b, ff_wheel }, { 0x046d, 0xc295, ff_joystick }, { 0x046d, 0xc298, ff_wheel }, { 0x046d, 0xc299, ff_wheel }, diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index 0ec91c18a421..a5eda4c8127a 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -501,9 +501,17 @@ static int magicmouse_probe(struct hid_device *hdev, } report->size = 6; + /* + * The device reponds with 'invalid report id' when feature + * report switching it into multitouch mode is sent to it. + * + * This results in -EIO from the _raw low-level transport callback, + * but there seems to be no other way of switching the mode. + * Thus the super-ugly hacky success check below. + */ ret = hdev->hid_output_raw_report(hdev, feature, sizeof(feature), HID_FEATURE_REPORT); - if (ret != sizeof(feature)) { + if (ret != -EIO) { hid_err(hdev, "unable to request touch data (%d)\n", ret); goto err_stop_hw; } diff --git a/drivers/hid/hid-mosart.c b/drivers/hid/hid-mosart.c deleted file mode 100644 index aed7ffe36283..000000000000 --- a/drivers/hid/hid-mosart.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * HID driver for the multitouch panel on the ASUS EeePC T91MT - * - * Copyright (c) 2009-2010 Stephane Chatty - * Copyright (c) 2010 Teemu Tuominen - * - */ - -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - */ - -#include -#include -#include -#include -#include -#include "usbhid/usbhid.h" - -MODULE_AUTHOR("Stephane Chatty "); -MODULE_DESCRIPTION("MosArt dual-touch panel"); -MODULE_LICENSE("GPL"); - -#include "hid-ids.h" - -struct mosart_data { - __u16 x, y; - __u8 id; - bool valid; /* valid finger data, or just placeholder? */ - bool first; /* is this the first finger in this frame? */ - bool activity_now; /* at least one active finger in this frame? */ - bool activity; /* at least one active finger previously? */ -}; - -static int mosart_input_mapping(struct hid_device *hdev, struct hid_input *hi, - struct hid_field *field, struct hid_usage *usage, - unsigned long **bit, int *max) -{ - switch (usage->hid & HID_USAGE_PAGE) { - - case HID_UP_GENDESK: - switch (usage->hid) { - case HID_GD_X: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_POSITION_X); - /* touchscreen emulation */ - input_set_abs_params(hi->input, ABS_X, - field->logical_minimum, - field->logical_maximum, 0, 0); - return 1; - case HID_GD_Y: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_POSITION_Y); - /* touchscreen emulation */ - input_set_abs_params(hi->input, ABS_Y, - field->logical_minimum, - field->logical_maximum, 0, 0); - return 1; - } - return 0; - - case HID_UP_DIGITIZER: - switch (usage->hid) { - case HID_DG_CONFIDENCE: - case HID_DG_TIPSWITCH: - case HID_DG_INPUTMODE: - case HID_DG_DEVICEINDEX: - case HID_DG_CONTACTCOUNT: - case HID_DG_CONTACTMAX: - case HID_DG_TIPPRESSURE: - case HID_DG_WIDTH: - case HID_DG_HEIGHT: - return -1; - case HID_DG_INRANGE: - /* touchscreen emulation */ - hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); - return 1; - - case HID_DG_CONTACTID: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_TRACKING_ID); - return 1; - - } - return 0; - - case 0xff000000: - /* ignore HID features */ - return -1; - - case HID_UP_BUTTON: - /* ignore buttons */ - return -1; - } - - return 0; -} - -static int mosart_input_mapped(struct hid_device *hdev, struct hid_input *hi, - struct hid_field *field, struct hid_usage *usage, - unsigned long **bit, int *max) -{ - if (usage->type == EV_KEY || usage->type == EV_ABS) - clear_bit(usage->code, *bit); - - return 0; -} - -/* - * this function is called when a whole finger has been parsed, - * so that it can decide what to send to the input layer. - */ -static void mosart_filter_event(struct mosart_data *td, struct input_dev *input) -{ - td->first = !td->first; /* touchscreen emulation */ - - if (!td->valid) { - /* - * touchscreen emulation: if no finger in this frame is valid - * and there previously was finger activity, this is a release - */ - if (!td->first && !td->activity_now && td->activity) { - input_event(input, EV_KEY, BTN_TOUCH, 0); - td->activity = false; - } - return; - } - - input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id); - input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x); - input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y); - - input_mt_sync(input); - td->valid = false; - - /* touchscreen emulation: if first active finger in this frame... */ - if (!td->activity_now) { - /* if there was no previous activity, emit touch event */ - if (!td->activity) { - input_event(input, EV_KEY, BTN_TOUCH, 1); - td->activity = true; - } - td->activity_now = true; - /* and in any case this is our preferred finger */ - input_event(input, EV_ABS, ABS_X, td->x); - input_event(input, EV_ABS, ABS_Y, td->y); - } -} - - -static int mosart_event(struct hid_device *hid, struct hid_field *field, - struct hid_usage *usage, __s32 value) -{ - struct mosart_data *td = hid_get_drvdata(hid); - - if (hid->claimed & HID_CLAIMED_INPUT) { - struct input_dev *input = field->hidinput->input; - switch (usage->hid) { - case HID_DG_INRANGE: - td->valid = !!value; - break; - case HID_GD_X: - td->x = value; - break; - case HID_GD_Y: - td->y = value; - mosart_filter_event(td, input); - break; - case HID_DG_CONTACTID: - td->id = value; - break; - case HID_DG_CONTACTCOUNT: - /* touch emulation: this is the last field in a frame */ - td->first = false; - td->activity_now = false; - break; - case HID_DG_CONFIDENCE: - case HID_DG_TIPSWITCH: - /* avoid interference from generic hidinput handling */ - break; - - default: - /* fallback to the generic hidinput handling */ - return 0; - } - } - - /* we have handled the hidinput part, now remains hiddev */ - if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event) - hid->hiddev_hid_event(hid, field, usage, value); - - return 1; -} - -static int mosart_probe(struct hid_device *hdev, const struct hid_device_id *id) -{ - int ret; - struct mosart_data *td; - - - td = kmalloc(sizeof(struct mosart_data), GFP_KERNEL); - if (!td) { - hid_err(hdev, "cannot allocate MosArt data\n"); - return -ENOMEM; - } - td->valid = false; - td->activity = false; - td->activity_now = false; - td->first = false; - hid_set_drvdata(hdev, td); - - /* currently, it's better to have one evdev device only */ -#if 0 - hdev->quirks |= HID_QUIRK_MULTI_INPUT; -#endif - - ret = hid_parse(hdev); - if (ret == 0) - ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); - - if (ret == 0) { - struct hid_report_enum *re = hdev->report_enum - + HID_FEATURE_REPORT; - struct hid_report *r = re->report_id_hash[7]; - - r->field[0]->value[0] = 0x02; - usbhid_submit_report(hdev, r, USB_DIR_OUT); - } else - kfree(td); - - return ret; -} - -#ifdef CONFIG_PM -static int mosart_reset_resume(struct hid_device *hdev) -{ - struct hid_report_enum *re = hdev->report_enum - + HID_FEATURE_REPORT; - struct hid_report *r = re->report_id_hash[7]; - - r->field[0]->value[0] = 0x02; - usbhid_submit_report(hdev, r, USB_DIR_OUT); - return 0; -} -#endif - -static void mosart_remove(struct hid_device *hdev) -{ - hid_hw_stop(hdev); - kfree(hid_get_drvdata(hdev)); - hid_set_drvdata(hdev, NULL); -} - -static const struct hid_device_id mosart_devices[] = { - { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT) }, - { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUSTEK_MULTITOUCH_YFO) }, - { HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART) }, - { } -}; -MODULE_DEVICE_TABLE(hid, mosart_devices); - -static const struct hid_usage_id mosart_grabbed_usages[] = { - { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID }, - { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1} -}; - -static struct hid_driver mosart_driver = { - .name = "mosart", - .id_table = mosart_devices, - .probe = mosart_probe, - .remove = mosart_remove, - .input_mapping = mosart_input_mapping, - .input_mapped = mosart_input_mapped, - .usage_table = mosart_grabbed_usages, - .event = mosart_event, -#ifdef CONFIG_PM - .reset_resume = mosart_reset_resume, -#endif -}; - -static int __init mosart_init(void) -{ - return hid_register_driver(&mosart_driver); -} - -static void __exit mosart_exit(void) -{ - hid_unregister_driver(&mosart_driver); -} - -module_init(mosart_init); -module_exit(mosart_exit); - diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index ee01e65e22d6..ecd4d2db9e80 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -11,6 +11,12 @@ * Copyright (c) 2010 Henrik Rydberg * Copyright (c) 2010 Canonical, Ltd. * + * This code is partly based on hid-3m-pct.c: + * + * Copyright (c) 2009-2010 Stephane Chatty + * Copyright (c) 2010 Henrik Rydberg + * Copyright (c) 2010 Canonical, Ltd. + * */ /* @@ -44,6 +50,7 @@ MODULE_LICENSE("GPL"); #define MT_QUIRK_VALID_IS_INRANGE (1 << 4) #define MT_QUIRK_VALID_IS_CONFIDENCE (1 << 5) #define MT_QUIRK_EGALAX_XYZ_FIXUP (1 << 6) +#define MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE (1 << 7) struct mt_slot { __s32 x, y, p, w, h; @@ -60,24 +67,36 @@ struct mt_device { __s8 inputmode; /* InputMode HID feature, -1 if non-existent */ __u8 num_received; /* how many contacts we received */ __u8 num_expected; /* expected last contact index */ + __u8 maxcontacts; bool curvalid; /* is the current contact valid? */ - struct mt_slot slots[0]; /* first slot */ + struct mt_slot *slots; }; struct mt_class { __s32 name; /* MT_CLS */ __s32 quirks; __s32 sn_move; /* Signal/noise ratio for move events */ + __s32 sn_width; /* Signal/noise ratio for width events */ + __s32 sn_height; /* Signal/noise ratio for height events */ __s32 sn_pressure; /* Signal/noise ratio for pressure events */ __u8 maxcontacts; }; /* classes of device behavior */ -#define MT_CLS_DEFAULT 1 -#define MT_CLS_DUAL_INRANGE_CONTACTID 2 -#define MT_CLS_DUAL_INRANGE_CONTACTNUMBER 3 -#define MT_CLS_CYPRESS 4 -#define MT_CLS_EGALAX 5 +#define MT_CLS_DEFAULT 0x0001 + +#define MT_CLS_CONFIDENCE 0x0002 +#define MT_CLS_CONFIDENCE_MINUS_ONE 0x0003 +#define MT_CLS_DUAL_INRANGE_CONTACTID 0x0004 +#define MT_CLS_DUAL_INRANGE_CONTACTNUMBER 0x0005 +#define MT_CLS_DUAL_NSMU_CONTACTID 0x0006 + +/* vendor specific classes */ +#define MT_CLS_3M 0x0101 +#define MT_CLS_CYPRESS 0x0102 +#define MT_CLS_EGALAX 0x0103 + +#define MT_DEFAULT_MAXCONTACT 10 /* * these device-dependent functions determine what slot corresponds @@ -95,12 +114,12 @@ static int cypress_compute_slot(struct mt_device *td) static int find_slot_from_contactid(struct mt_device *td) { int i; - for (i = 0; i < td->mtclass->maxcontacts; ++i) { + for (i = 0; i < td->maxcontacts; ++i) { if (td->slots[i].contactid == td->curdata.contactid && td->slots[i].touch_state) return i; } - for (i = 0; i < td->mtclass->maxcontacts; ++i) { + for (i = 0; i < td->maxcontacts; ++i) { if (!td->slots[i].seen_in_this_frame && !td->slots[i].touch_state) return i; @@ -113,8 +132,12 @@ static int find_slot_from_contactid(struct mt_device *td) struct mt_class mt_classes[] = { { .name = MT_CLS_DEFAULT, - .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP, - .maxcontacts = 10 }, + .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP }, + { .name = MT_CLS_CONFIDENCE, + .quirks = MT_QUIRK_VALID_IS_CONFIDENCE }, + { .name = MT_CLS_CONFIDENCE_MINUS_ONE, + .quirks = MT_QUIRK_VALID_IS_CONFIDENCE | + MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE }, { .name = MT_CLS_DUAL_INRANGE_CONTACTID, .quirks = MT_QUIRK_VALID_IS_INRANGE | MT_QUIRK_SLOT_IS_CONTACTID, @@ -123,11 +146,24 @@ struct mt_class mt_classes[] = { .quirks = MT_QUIRK_VALID_IS_INRANGE | MT_QUIRK_SLOT_IS_CONTACTNUMBER, .maxcontacts = 2 }, + { .name = MT_CLS_DUAL_NSMU_CONTACTID, + .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP | + MT_QUIRK_SLOT_IS_CONTACTID, + .maxcontacts = 2 }, + + /* + * vendor specific classes + */ + { .name = MT_CLS_3M, + .quirks = MT_QUIRK_VALID_IS_CONFIDENCE | + MT_QUIRK_SLOT_IS_CONTACTID, + .sn_move = 2048, + .sn_width = 128, + .sn_height = 128 }, { .name = MT_CLS_CYPRESS, .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP | MT_QUIRK_CYPRESS, .maxcontacts = 10 }, - { .name = MT_CLS_EGALAX, .quirks = MT_QUIRK_SLOT_IS_CONTACTID | MT_QUIRK_VALID_IS_INRANGE | @@ -136,15 +172,26 @@ struct mt_class mt_classes[] = { .sn_move = 4096, .sn_pressure = 32, }, + { } }; static void mt_feature_mapping(struct hid_device *hdev, struct hid_field *field, struct hid_usage *usage) { - if (usage->hid == HID_DG_INPUTMODE) { - struct mt_device *td = hid_get_drvdata(hdev); + struct mt_device *td = hid_get_drvdata(hdev); + + switch (usage->hid) { + case HID_DG_INPUTMODE: td->inputmode = field->report->id; + break; + case HID_DG_CONTACTMAX: + td->maxcontacts = field->value[0]; + if (td->mtclass->maxcontacts) + /* check if the maxcontacts is given by the class */ + td->maxcontacts = td->mtclass->maxcontacts; + + break; } } @@ -179,6 +226,7 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, /* touchscreen emulation */ set_abs(hi->input, ABS_X, field, cls->sn_move); td->last_slot_field = usage->hid; + td->last_field_index = field->index; return 1; case HID_GD_Y: if (quirks & MT_QUIRK_EGALAX_XYZ_FIXUP) @@ -190,6 +238,7 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, /* touchscreen emulation */ set_abs(hi->input, ABS_Y, field, cls->sn_move); td->last_slot_field = usage->hid; + td->last_field_index = field->index; return 1; } return 0; @@ -198,32 +247,40 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, switch (usage->hid) { case HID_DG_INRANGE: td->last_slot_field = usage->hid; + td->last_field_index = field->index; return 1; case HID_DG_CONFIDENCE: td->last_slot_field = usage->hid; + td->last_field_index = field->index; return 1; case HID_DG_TIPSWITCH: hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); input_set_capability(hi->input, EV_KEY, BTN_TOUCH); td->last_slot_field = usage->hid; + td->last_field_index = field->index; return 1; case HID_DG_CONTACTID: - input_mt_init_slots(hi->input, - td->mtclass->maxcontacts); + input_mt_init_slots(hi->input, td->maxcontacts); td->last_slot_field = usage->hid; + td->last_field_index = field->index; return 1; case HID_DG_WIDTH: hid_map_usage(hi, usage, bit, max, EV_ABS, ABS_MT_TOUCH_MAJOR); + set_abs(hi->input, ABS_MT_TOUCH_MAJOR, field, + cls->sn_width); td->last_slot_field = usage->hid; + td->last_field_index = field->index; return 1; case HID_DG_HEIGHT: hid_map_usage(hi, usage, bit, max, EV_ABS, ABS_MT_TOUCH_MINOR); - field->logical_maximum = 1; - field->logical_minimum = 0; - set_abs(hi->input, ABS_MT_ORIENTATION, field, 0); + set_abs(hi->input, ABS_MT_TOUCH_MINOR, field, + cls->sn_height); + input_set_abs_params(hi->input, + ABS_MT_ORIENTATION, 0, 1, 0, 0); td->last_slot_field = usage->hid; + td->last_field_index = field->index; return 1; case HID_DG_TIPPRESSURE: if (quirks & MT_QUIRK_EGALAX_XYZ_FIXUP) @@ -236,13 +293,15 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, set_abs(hi->input, ABS_PRESSURE, field, cls->sn_pressure); td->last_slot_field = usage->hid; + td->last_field_index = field->index; return 1; case HID_DG_CONTACTCOUNT: - td->last_field_index = field->report->maxfield - 1; + td->last_field_index = field->index; return 1; case HID_DG_CONTACTMAX: /* we don't set td->last_slot_field as contactcount and * contact max are global to the report */ + td->last_field_index = field->index; return -1; } /* let hid-input decide for the others */ @@ -279,6 +338,9 @@ static int mt_compute_slot(struct mt_device *td) if (quirks & MT_QUIRK_SLOT_IS_CONTACTNUMBER) return td->num_received; + if (quirks & MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE) + return td->curdata.contactid - 1; + return find_slot_from_contactid(td); } @@ -292,7 +354,7 @@ static void mt_complete_slot(struct mt_device *td) if (td->curvalid) { int slotnum = mt_compute_slot(td); - if (slotnum >= 0 && slotnum < td->mtclass->maxcontacts) + if (slotnum >= 0 && slotnum < td->maxcontacts) td->slots[slotnum] = td->curdata; } td->num_received++; @@ -307,7 +369,7 @@ static void mt_emit_event(struct mt_device *td, struct input_dev *input) { int i; - for (i = 0; i < td->mtclass->maxcontacts; ++i) { + for (i = 0; i < td->maxcontacts; ++i) { struct mt_slot *s = &(td->slots[i]); if ((td->mtclass->quirks & MT_QUIRK_NOT_SEEN_MEANS_UP) && !s->seen_in_this_frame) { @@ -318,11 +380,18 @@ static void mt_emit_event(struct mt_device *td, struct input_dev *input) input_mt_report_slot_state(input, MT_TOOL_FINGER, s->touch_state); if (s->touch_state) { + /* this finger is on the screen */ + int wide = (s->w > s->h); + /* divided by two to match visual scale of touch */ + int major = max(s->w, s->h) >> 1; + int minor = min(s->w, s->h) >> 1; + input_event(input, EV_ABS, ABS_MT_POSITION_X, s->x); input_event(input, EV_ABS, ABS_MT_POSITION_Y, s->y); + input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide); input_event(input, EV_ABS, ABS_MT_PRESSURE, s->p); - input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, s->w); - input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, s->h); + input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major); + input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor); } s->seen_in_this_frame = false; @@ -341,7 +410,7 @@ static int mt_event(struct hid_device *hid, struct hid_field *field, struct mt_device *td = hid_get_drvdata(hid); __s32 quirks = td->mtclass->quirks; - if (hid->claimed & HID_CLAIMED_INPUT) { + if (hid->claimed & HID_CLAIMED_INPUT && td->slots) { switch (usage->hid) { case HID_DG_INRANGE: if (quirks & MT_QUIRK_VALID_IS_INRANGE) @@ -390,8 +459,6 @@ static int mt_event(struct hid_device *hid, struct hid_field *field, if (usage->hid == td->last_slot_field) { mt_complete_slot(td); - if (!td->last_field_index) - mt_emit_event(td, field->hidinput->input); } if (field->index == td->last_field_index @@ -442,9 +509,7 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) */ hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC; - td = kzalloc(sizeof(struct mt_device) + - mtclass->maxcontacts * sizeof(struct mt_slot), - GFP_KERNEL); + td = kzalloc(sizeof(struct mt_device), GFP_KERNEL); if (!td) { dev_err(&hdev->dev, "cannot allocate multitouch data\n"); return -ENOMEM; @@ -461,6 +526,18 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) if (ret) goto fail; + if (!td->maxcontacts) + td->maxcontacts = MT_DEFAULT_MAXCONTACT; + + td->slots = kzalloc(td->maxcontacts * sizeof(struct mt_slot), + GFP_KERNEL); + if (!td->slots) { + dev_err(&hdev->dev, "cannot allocate multitouch slots\n"); + hid_hw_stop(hdev); + ret = -ENOMEM; + goto fail; + } + mt_set_input_mode(hdev); return 0; @@ -482,27 +559,115 @@ static void mt_remove(struct hid_device *hdev) { struct mt_device *td = hid_get_drvdata(hdev); hid_hw_stop(hdev); + kfree(td->slots); kfree(td); hid_set_drvdata(hdev, NULL); } static const struct hid_device_id mt_devices[] = { + /* 3M panels */ + { .driver_data = MT_CLS_3M, + HID_USB_DEVICE(USB_VENDOR_ID_3M, + USB_DEVICE_ID_3M1968) }, + { .driver_data = MT_CLS_3M, + HID_USB_DEVICE(USB_VENDOR_ID_3M, + USB_DEVICE_ID_3M2256) }, + + /* ActionStar panels */ + { .driver_data = MT_CLS_DEFAULT, + HID_USB_DEVICE(USB_VENDOR_ID_ACTIONSTAR, + USB_DEVICE_ID_ACTIONSTAR_1011) }, + + /* Cando panels */ + { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER, + HID_USB_DEVICE(USB_VENDOR_ID_CANDO, + USB_DEVICE_ID_CANDO_MULTI_TOUCH) }, + { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER, + HID_USB_DEVICE(USB_VENDOR_ID_CANDO, + USB_DEVICE_ID_CANDO_MULTI_TOUCH_10_1) }, + { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER, + HID_USB_DEVICE(USB_VENDOR_ID_CANDO, + USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) }, + { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER, + HID_USB_DEVICE(USB_VENDOR_ID_CANDO, + USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) }, + + /* CVTouch panels */ + { .driver_data = MT_CLS_DEFAULT, + HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH, + USB_DEVICE_ID_CVTOUCH_SCREEN) }, + /* Cypress panel */ { .driver_data = MT_CLS_CYPRESS, HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_TRUETOUCH) }, + /* eGalax devices (resistive) */ + { .driver_data = MT_CLS_EGALAX, + HID_USB_DEVICE(USB_VENDOR_ID_DWAV, + USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) }, + { .driver_data = MT_CLS_EGALAX, + HID_USB_DEVICE(USB_VENDOR_ID_DWAV, + USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH3) }, + + /* eGalax devices (capacitive) */ + { .driver_data = MT_CLS_EGALAX, + HID_USB_DEVICE(USB_VENDOR_ID_DWAV, + USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) }, + { .driver_data = MT_CLS_EGALAX, + HID_USB_DEVICE(USB_VENDOR_ID_DWAV, + USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH2) }, + { .driver_data = MT_CLS_EGALAX, + HID_USB_DEVICE(USB_VENDOR_ID_DWAV, + USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH4) }, + + /* Elo TouchSystems IntelliTouch Plus panel */ + { .driver_data = MT_CLS_DUAL_NSMU_CONTACTID, + HID_USB_DEVICE(USB_VENDOR_ID_ELO, + USB_DEVICE_ID_ELO_TS2515) }, + /* GeneralTouch panel */ { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER, HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) }, + /* GoodTouch panels */ + { .driver_data = MT_CLS_DEFAULT, + HID_USB_DEVICE(USB_VENDOR_ID_GOODTOUCH, + USB_DEVICE_ID_GOODTOUCH_000f) }, + + /* Ilitek dual touch panel */ + { .driver_data = MT_CLS_DEFAULT, + HID_USB_DEVICE(USB_VENDOR_ID_ILITEK, + USB_DEVICE_ID_ILITEK_MULTITOUCH) }, + /* IRTOUCH panels */ { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID, HID_USB_DEVICE(USB_VENDOR_ID_IRTOUCHSYSTEMS, USB_DEVICE_ID_IRTOUCH_INFRARED_USB) }, + /* Lumio panels */ + { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE, + HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, + USB_DEVICE_ID_CRYSTALTOUCH) }, + + /* MosArt panels */ + { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE, + HID_USB_DEVICE(USB_VENDOR_ID_ASUS, + USB_DEVICE_ID_ASUS_T91MT)}, + { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE, + HID_USB_DEVICE(USB_VENDOR_ID_ASUS, + USB_DEVICE_ID_ASUSTEK_MULTITOUCH_YFO) }, + { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE, + HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, + USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART) }, + + /* PenMount panels */ + { .driver_data = MT_CLS_CONFIDENCE, + HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT, + USB_DEVICE_ID_PENMOUNT_PCI) }, + /* PixCir-based panels */ { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID, HID_USB_DEVICE(USB_VENDOR_ID_HANVON, @@ -511,24 +676,29 @@ static const struct hid_device_id mt_devices[] = { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_PIXCIR_MULTI_TOUCH) }, - /* Resistive eGalax devices */ - { .driver_data = MT_CLS_EGALAX, - HID_USB_DEVICE(USB_VENDOR_ID_DWAV, - USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) }, - { .driver_data = MT_CLS_EGALAX, - HID_USB_DEVICE(USB_VENDOR_ID_DWAV, - USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH3) }, - - /* Capacitive eGalax devices */ - { .driver_data = MT_CLS_EGALAX, - HID_USB_DEVICE(USB_VENDOR_ID_DWAV, - USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) }, - { .driver_data = MT_CLS_EGALAX, - HID_USB_DEVICE(USB_VENDOR_ID_DWAV, - USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH2) }, - { .driver_data = MT_CLS_EGALAX, - HID_USB_DEVICE(USB_VENDOR_ID_DWAV, - USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH4) }, + /* Stantum panels */ + { .driver_data = MT_CLS_CONFIDENCE, + HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, + USB_DEVICE_ID_MTP)}, + { .driver_data = MT_CLS_CONFIDENCE, + HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, + USB_DEVICE_ID_MTP_STM)}, + { .driver_data = MT_CLS_CONFIDENCE, + HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, + USB_DEVICE_ID_MTP_SITRONIX)}, + + /* Touch International panels */ + { .driver_data = MT_CLS_DEFAULT, + HID_USB_DEVICE(USB_VENDOR_ID_TOUCH_INTL, + USB_DEVICE_ID_TOUCH_INTL_MULTI_TOUCH) }, + + /* Unitec panels */ + { .driver_data = MT_CLS_DEFAULT, + HID_USB_DEVICE(USB_VENDOR_ID_UNITEC, + USB_DEVICE_ID_UNITEC_USB_TOUCH_0709) }, + { .driver_data = MT_CLS_DEFAULT, + HID_USB_DEVICE(USB_VENDOR_ID_UNITEC, + USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19) }, { } }; diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c index 93819a08121a..936c911fdca6 100644 --- a/drivers/hid/hid-sony.c +++ b/drivers/hid/hid-sony.c @@ -178,6 +178,8 @@ static void sony_remove(struct hid_device *hdev) static const struct hid_device_id sony_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER), .driver_data = SIXAXIS_CONTROLLER_USB }, + { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER), + .driver_data = SIXAXIS_CONTROLLER_USB }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER), .driver_data = SIXAXIS_CONTROLLER_BT }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE), diff --git a/drivers/hid/hid-stantum.c b/drivers/hid/hid-stantum.c deleted file mode 100644 index b2be1d11916b..000000000000 --- a/drivers/hid/hid-stantum.c +++ /dev/null @@ -1,286 +0,0 @@ -/* - * HID driver for Stantum multitouch panels - * - * Copyright (c) 2009 Stephane Chatty - * - */ - -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - */ - -#include -#include -#include -#include - -MODULE_AUTHOR("Stephane Chatty "); -MODULE_DESCRIPTION("Stantum HID multitouch panels"); -MODULE_LICENSE("GPL"); - -#include "hid-ids.h" - -struct stantum_data { - __s32 x, y, z, w, h; /* x, y, pressure, width, height */ - __u16 id; /* touch id */ - bool valid; /* valid finger data, or just placeholder? */ - bool first; /* first finger in the HID packet? */ - bool activity; /* at least one active finger so far? */ -}; - -static int stantum_input_mapping(struct hid_device *hdev, struct hid_input *hi, - struct hid_field *field, struct hid_usage *usage, - unsigned long **bit, int *max) -{ - switch (usage->hid & HID_USAGE_PAGE) { - - case HID_UP_GENDESK: - switch (usage->hid) { - case HID_GD_X: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_POSITION_X); - /* touchscreen emulation */ - input_set_abs_params(hi->input, ABS_X, - field->logical_minimum, - field->logical_maximum, 0, 0); - return 1; - case HID_GD_Y: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_POSITION_Y); - /* touchscreen emulation */ - input_set_abs_params(hi->input, ABS_Y, - field->logical_minimum, - field->logical_maximum, 0, 0); - return 1; - } - return 0; - - case HID_UP_DIGITIZER: - switch (usage->hid) { - case HID_DG_INRANGE: - case HID_DG_CONFIDENCE: - case HID_DG_INPUTMODE: - case HID_DG_DEVICEINDEX: - case HID_DG_CONTACTCOUNT: - case HID_DG_CONTACTMAX: - return -1; - - case HID_DG_TIPSWITCH: - /* touchscreen emulation */ - hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); - return 1; - - case HID_DG_WIDTH: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_TOUCH_MAJOR); - return 1; - case HID_DG_HEIGHT: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_TOUCH_MINOR); - input_set_abs_params(hi->input, ABS_MT_ORIENTATION, - 1, 1, 0, 0); - return 1; - case HID_DG_TIPPRESSURE: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_PRESSURE); - return 1; - - case HID_DG_CONTACTID: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_TRACKING_ID); - return 1; - - } - return 0; - - case 0xff000000: - /* no input-oriented meaning */ - return -1; - } - - return 0; -} - -static int stantum_input_mapped(struct hid_device *hdev, struct hid_input *hi, - struct hid_field *field, struct hid_usage *usage, - unsigned long **bit, int *max) -{ - if (usage->type == EV_KEY || usage->type == EV_ABS) - clear_bit(usage->code, *bit); - - return 0; -} - -/* - * this function is called when a whole finger has been parsed, - * so that it can decide what to send to the input layer. - */ -static void stantum_filter_event(struct stantum_data *sd, - struct input_dev *input) -{ - bool wide; - - if (!sd->valid) { - /* - * touchscreen emulation: if the first finger is not valid and - * there previously was finger activity, this is a release - */ - if (sd->first && sd->activity) { - input_event(input, EV_KEY, BTN_TOUCH, 0); - sd->activity = false; - } - return; - } - - input_event(input, EV_ABS, ABS_MT_TRACKING_ID, sd->id); - input_event(input, EV_ABS, ABS_MT_POSITION_X, sd->x); - input_event(input, EV_ABS, ABS_MT_POSITION_Y, sd->y); - - wide = (sd->w > sd->h); - input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide); - input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, wide ? sd->w : sd->h); - input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, wide ? sd->h : sd->w); - - input_event(input, EV_ABS, ABS_MT_PRESSURE, sd->z); - - input_mt_sync(input); - sd->valid = false; - - /* touchscreen emulation */ - if (sd->first) { - if (!sd->activity) { - input_event(input, EV_KEY, BTN_TOUCH, 1); - sd->activity = true; - } - input_event(input, EV_ABS, ABS_X, sd->x); - input_event(input, EV_ABS, ABS_Y, sd->y); - } - sd->first = false; -} - - -static int stantum_event(struct hid_device *hid, struct hid_field *field, - struct hid_usage *usage, __s32 value) -{ - struct stantum_data *sd = hid_get_drvdata(hid); - - if (hid->claimed & HID_CLAIMED_INPUT) { - struct input_dev *input = field->hidinput->input; - - switch (usage->hid) { - case HID_DG_INRANGE: - /* this is the last field in a finger */ - stantum_filter_event(sd, input); - break; - case HID_DG_WIDTH: - sd->w = value; - break; - case HID_DG_HEIGHT: - sd->h = value; - break; - case HID_GD_X: - sd->x = value; - break; - case HID_GD_Y: - sd->y = value; - break; - case HID_DG_TIPPRESSURE: - sd->z = value; - break; - case HID_DG_CONTACTID: - sd->id = value; - break; - case HID_DG_CONFIDENCE: - sd->valid = !!value; - break; - case 0xff000002: - /* this comes only before the first finger */ - sd->first = true; - break; - - default: - /* ignore the others */ - return 1; - } - } - - /* we have handled the hidinput part, now remains hiddev */ - if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event) - hid->hiddev_hid_event(hid, field, usage, value); - - return 1; -} - -static int stantum_probe(struct hid_device *hdev, - const struct hid_device_id *id) -{ - int ret; - struct stantum_data *sd; - - sd = kmalloc(sizeof(struct stantum_data), GFP_KERNEL); - if (!sd) { - hid_err(hdev, "cannot allocate Stantum data\n"); - return -ENOMEM; - } - sd->valid = false; - sd->first = false; - sd->activity = false; - hid_set_drvdata(hdev, sd); - - ret = hid_parse(hdev); - if (!ret) - ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); - - if (ret) - kfree(sd); - - return ret; -} - -static void stantum_remove(struct hid_device *hdev) -{ - hid_hw_stop(hdev); - kfree(hid_get_drvdata(hdev)); - hid_set_drvdata(hdev, NULL); -} - -static const struct hid_device_id stantum_devices[] = { - { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) }, - { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM, USB_DEVICE_ID_MTP_STM) }, - { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_SITRONIX, USB_DEVICE_ID_MTP_SITRONIX) }, - { } -}; -MODULE_DEVICE_TABLE(hid, stantum_devices); - -static const struct hid_usage_id stantum_grabbed_usages[] = { - { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID }, - { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1} -}; - -static struct hid_driver stantum_driver = { - .name = "stantum", - .id_table = stantum_devices, - .probe = stantum_probe, - .remove = stantum_remove, - .input_mapping = stantum_input_mapping, - .input_mapped = stantum_input_mapped, - .usage_table = stantum_grabbed_usages, - .event = stantum_event, -}; - -static int __init stantum_init(void) -{ - return hid_register_driver(&stantum_driver); -} - -static void __exit stantum_exit(void) -{ - hid_unregister_driver(&stantum_driver); -} - -module_init(stantum_init); -module_exit(stantum_exit); - diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index a8426f15e9ab..0e30b140edca 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -68,6 +68,8 @@ static const struct hid_blacklist { { USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET }, { USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NOGET }, { USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_1, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_2, HID_QUIRK_NOGET }, { USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET }, { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U, HID_QUIRK_MULTI_INPUT }, diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index f4c67a5021c7..ff3c644888b1 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -373,8 +373,10 @@ static ssize_t hiddev_read(struct file * file, char __user * buffer, size_t coun /* let O_NONBLOCK tasks run */ mutex_unlock(&list->thread_lock); schedule(); - if (mutex_lock_interruptible(&list->thread_lock)) + if (mutex_lock_interruptible(&list->thread_lock)) { + finish_wait(&list->hiddev->wait, &wait); return -EINTR; + } set_current_state(TASK_INTERRUPTIBLE); } finish_wait(&list->hiddev->wait, &wait); diff --git a/samples/Kconfig b/samples/Kconfig index 41063e7592d2..96a7572853f7 100644 --- a/samples/Kconfig +++ b/samples/Kconfig @@ -61,4 +61,10 @@ config SAMPLE_KDB Build an example of how to dynamically add the hello command to the kdb shell. +config SAMPLE_HIDRAW + bool "Build simple hidraw example" + depends on HIDRAW && HEADERS_CHECK + help + Build an example of how to use hidraw from userspace. + endif # SAMPLES diff --git a/samples/Makefile b/samples/Makefile index f26c0959fd86..6280817c2b7e 100644 --- a/samples/Makefile +++ b/samples/Makefile @@ -1,4 +1,4 @@ # Makefile for Linux samples code obj-$(CONFIG_SAMPLES) += kobject/ kprobes/ tracepoints/ trace_events/ \ - hw_breakpoint/ kfifo/ kdb/ + hw_breakpoint/ kfifo/ kdb/ hidraw/ diff --git a/samples/hidraw/Makefile b/samples/hidraw/Makefile new file mode 100644 index 000000000000..382eeae77bd6 --- /dev/null +++ b/samples/hidraw/Makefile @@ -0,0 +1,10 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := hid-example + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_hid-example.o += -I$(objtree)/usr/include diff --git a/samples/hidraw/hid-example.c b/samples/hidraw/hid-example.c new file mode 100644 index 000000000000..816e2dcda7ca --- /dev/null +++ b/samples/hidraw/hid-example.c @@ -0,0 +1,178 @@ +/* + * Hidraw Userspace Example + * + * Copyright (c) 2010 Alan Ott + * Copyright (c) 2010 Signal 11 Software + * + * The code may be used by anyone for any purpose, + * and can serve as a starting point for developing + * applications using hidraw. + */ + +/* Linux */ +#include +#include +#include + +/* + * Ugly hack to work around failing compilation on systems that don't + * yet populate new version of hidraw.h to userspace. + * + * If you need this, please have your distro update the kernel headers. + */ +#ifndef HIDIOCSFEATURE +#define HIDIOCSFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len) +#define HIDIOCGFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len) +#endif + +/* Unix */ +#include +#include +#include +#include +#include + +/* C */ +#include +#include +#include +#include + +const char *bus_str(int bus); + +int main(int argc, char **argv) +{ + int fd; + int i, res, desc_size = 0; + char buf[256]; + struct hidraw_report_descriptor rpt_desc; + struct hidraw_devinfo info; + + /* Open the Device with non-blocking reads. In real life, + don't use a hard coded path; use libudev instead. */ + fd = open("/dev/hidraw0", O_RDWR|O_NONBLOCK); + + if (fd < 0) { + perror("Unable to open device"); + return 1; + } + + memset(&rpt_desc, 0x0, sizeof(rpt_desc)); + memset(&info, 0x0, sizeof(info)); + memset(buf, 0x0, sizeof(buf)); + + /* Get Report Descriptor Size */ + res = ioctl(fd, HIDIOCGRDESCSIZE, &desc_size); + if (res < 0) + perror("HIDIOCGRDESCSIZE"); + else + printf("Report Descriptor Size: %d\n", desc_size); + + /* Get Report Descriptor */ + rpt_desc.size = desc_size; + res = ioctl(fd, HIDIOCGRDESC, &rpt_desc); + if (res < 0) { + perror("HIDIOCGRDESC"); + } else { + printf("Report Descriptor:\n"); + for (i = 0; i < rpt_desc.size; i++) + printf("%hhx ", rpt_desc.value[i]); + puts("\n"); + } + + /* Get Raw Name */ + res = ioctl(fd, HIDIOCGRAWNAME(256), buf); + if (res < 0) + perror("HIDIOCGRAWNAME"); + else + printf("Raw Name: %s\n", buf); + + /* Get Physical Location */ + res = ioctl(fd, HIDIOCGRAWPHYS(256), buf); + if (res < 0) + perror("HIDIOCGRAWPHYS"); + else + printf("Raw Phys: %s\n", buf); + + /* Get Raw Info */ + res = ioctl(fd, HIDIOCGRAWINFO, &info); + if (res < 0) { + perror("HIDIOCGRAWINFO"); + } else { + printf("Raw Info:\n"); + printf("\tbustype: %d (%s)\n", + info.bustype, bus_str(info.bustype)); + printf("\tvendor: 0x%04hx\n", info.vendor); + printf("\tproduct: 0x%04hx\n", info.product); + } + + /* Set Feature */ + buf[0] = 0x9; /* Report Number */ + buf[1] = 0xff; + buf[2] = 0xff; + buf[3] = 0xff; + res = ioctl(fd, HIDIOCSFEATURE(4), buf); + if (res < 0) + perror("HIDIOCSFEATURE"); + else + printf("ioctl HIDIOCGFEATURE returned: %d\n", res); + + /* Get Feature */ + buf[0] = 0x9; /* Report Number */ + res = ioctl(fd, HIDIOCGFEATURE(256), buf); + if (res < 0) { + perror("HIDIOCGFEATURE"); + } else { + printf("ioctl HIDIOCGFEATURE returned: %d\n", res); + printf("Report data (not containing the report number):\n\t"); + for (i = 0; i < res; i++) + printf("%hhx ", buf[i]); + puts("\n"); + } + + /* Send a Report to the Device */ + buf[0] = 0x1; /* Report Number */ + buf[1] = 0x77; + res = write(fd, buf, 2); + if (res < 0) { + printf("Error: %d\n", errno); + perror("write"); + } else { + printf("write() wrote %d bytes\n", res); + } + + /* Get a report from the device */ + res = read(fd, buf, 16); + if (res < 0) { + perror("read"); + } else { + printf("read() read %d bytes:\n\t", res); + for (i = 0; i < res; i++) + printf("%hhx ", buf[i]); + puts("\n"); + } + close(fd); + return 0; +} + +const char * +bus_str(int bus) +{ + switch (bus) { + case BUS_USB: + return "USB"; + break; + case BUS_HIL: + return "HIL"; + break; + case BUS_BLUETOOTH: + return "Bluetooth"; + break; + case BUS_VIRTUAL: + return "Virtual"; + break; + default: + return "Other"; + break; + } +}