From: Lennert Buytenhek Date: Fri, 17 Jul 2009 03:21:04 +0000 (+0200) Subject: mwl8k: mwl8k_txq_xmit() rework X-Git-Tag: v2.6.32-rc1~703^2~335^2~13 X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=commitdiff_plain;h=23b339062f247e0be84eaabb15e17b403c4388b6 mwl8k: mwl8k_txq_xmit() rework Various mwl8k_txq_xmit changes: - Extract the QoS field before adding the DMA header. - Only write to tx->status once, and only after all the other descriptor fields have been set. - Do all tx state manipulation under the tx spinlock. - Remove the priv->inconfig check, as all transmit queues will be frozen during config cycles, so we won't ever be asked to transmit if a config cycle is running. - Remove some more dead code. Signed-off-by: Lennert Buytenhek Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 65eefe835024..88ba52e13af2 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -1257,46 +1257,60 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb) { struct mwl8k_priv *priv = hw->priv; struct ieee80211_tx_info *tx_info; + struct mwl8k_vif *mwl8k_vif; struct ieee80211_hdr *wh; struct mwl8k_tx_queue *txq; struct mwl8k_tx_desc *tx; - struct mwl8k_dma_data *tr; - struct mwl8k_vif *mwl8k_vif; dma_addr_t dma; - u16 qos = 0; - bool qosframe = false, ampduframe = false; - bool mcframe = false, eapolframe = false; - bool amsduframe = false; - __le16 fc; + u32 txstatus; + u8 txdatarate; + u16 qos; - txq = priv->txq + index; - tx = txq->tx_desc_area + txq->tx_tail; - - BUG_ON(txq->tx_skb[txq->tx_tail] != NULL); + wh = (struct ieee80211_hdr *)skb->data; + if (ieee80211_is_data_qos(wh->frame_control)) + qos = le16_to_cpu(*((__le16 *)ieee80211_get_qos_ctl(wh))); + else + qos = 0; - /* - * Append HW DMA header to start of packet. - */ mwl8k_add_dma_header(skb); + wh = &((struct mwl8k_dma_data *)skb->data)->wh; tx_info = IEEE80211_SKB_CB(skb); mwl8k_vif = MWL8K_VIF(tx_info->control.vif); - tr = (struct mwl8k_dma_data *)skb->data; - wh = &tr->wh; - fc = wh->frame_control; - qosframe = ieee80211_is_data_qos(fc); - mcframe = is_multicast_ether_addr(wh->addr1); - ampduframe = !!(tx_info->flags & IEEE80211_TX_CTL_AMPDU); if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { u16 seqno = mwl8k_vif->seqno; + wh->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); wh->seq_ctrl |= cpu_to_le16(seqno << 4); mwl8k_vif->seqno = seqno++ % 4096; } - if (qosframe) - qos = le16_to_cpu(*((__le16 *)ieee80211_get_qos_ctl(wh))); + /* Setup firmware control bit fields for each frame type. */ + txstatus = 0; + txdatarate = 0; + if (ieee80211_is_mgmt(wh->frame_control) || + ieee80211_is_ctl(wh->frame_control)) { + txdatarate = 0; + qos = mwl8k_qos_setbit_eosp(qos); + /* Set Queue size to unspecified */ + qos = mwl8k_qos_setbit_qlen(qos, 0xff); + } else if (ieee80211_is_data(wh->frame_control)) { + txdatarate = 1; + if (is_multicast_ether_addr(wh->addr1)) + txstatus |= MWL8K_TXD_STATUS_MULTICAST_TX; + + /* Send pkt in an aggregate if AMPDU frame. */ + if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) + qos = mwl8k_qos_setbit_ack(qos, + MWL8K_TXD_ACK_POLICY_BLOCKACK); + else + qos = mwl8k_qos_setbit_ack(qos, + MWL8K_TXD_ACK_POLICY_NORMAL); + + if (qos & IEEE80211_QOS_CONTROL_A_MSDU_PRESENT) + qos = mwl8k_qos_setbit_amsdu(qos); + } dma = pci_map_single(priv->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); @@ -1304,95 +1318,40 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb) if (pci_dma_mapping_error(priv->pdev, dma)) { printk(KERN_DEBUG "%s: failed to dma map skb, " "dropping TX frame.\n", priv->name); - - if (skb != NULL) - dev_kfree_skb(skb); + dev_kfree_skb(skb); return NETDEV_TX_OK; } - /* Set desc header, cpu bit order. */ - tx->status = 0; - tx->data_rate = 0; - tx->tx_priority = index; - tx->qos_control = 0; - tx->rate_info = 0; - tx->peer_id = mwl8k_vif->peer_id; - - amsduframe = !!(qos & IEEE80211_QOS_CONTROL_A_MSDU_PRESENT); - - /* Setup firmware control bit fields for each frame type. */ - if (ieee80211_is_mgmt(fc) || ieee80211_is_ctl(fc)) { - tx->data_rate = 0; - qos = mwl8k_qos_setbit_eosp(qos); - /* Set Queue size to unspecified */ - qos = mwl8k_qos_setbit_qlen(qos, 0xff); - } else if (ieee80211_is_data(fc)) { - tx->data_rate = 1; - if (mcframe) - tx->status |= MWL8K_TXD_STATUS_MULTICAST_TX; + spin_lock_bh(&priv->tx_lock); - /* - * Tell firmware to not send EAPOL pkts in an - * aggregate. Verify against mac80211 tx path. If - * stack turns off AMPDU for an EAPOL frame this - * check will be removed. - */ - if (eapolframe) { - qos = mwl8k_qos_setbit_ack(qos, - MWL8K_TXD_ACK_POLICY_NORMAL); - } else { - /* Send pkt in an aggregate if AMPDU frame. */ - if (ampduframe) - qos = mwl8k_qos_setbit_ack(qos, - MWL8K_TXD_ACK_POLICY_BLOCKACK); - else - qos = mwl8k_qos_setbit_ack(qos, - MWL8K_TXD_ACK_POLICY_NORMAL); + txq = priv->txq + index; - if (amsduframe) - qos = mwl8k_qos_setbit_amsdu(qos); - } - } + BUG_ON(txq->tx_skb[txq->tx_tail] != NULL); + txq->tx_skb[txq->tx_tail] = skb; - /* Convert to little endian */ + tx = txq->tx_desc_area + txq->tx_tail; + tx->data_rate = txdatarate; + tx->tx_priority = index; tx->qos_control = cpu_to_le16(qos); - tx->status = cpu_to_le32(tx->status); tx->pkt_phys_addr = cpu_to_le32(dma); tx->pkt_len = cpu_to_le16(skb->len); - - txq->tx_skb[txq->tx_tail] = skb; - - spin_lock_bh(&priv->tx_lock); - - tx->status = cpu_to_le32(MWL8K_TXD_STATUS_OK | - MWL8K_TXD_STATUS_FW_OWNED); + tx->rate_info = 0; + tx->peer_id = mwl8k_vif->peer_id; wmb(); + tx->status = cpu_to_le32(MWL8K_TXD_STATUS_FW_OWNED | txstatus); + + txq->tx_stats.count++; txq->tx_stats.len++; priv->pending_tx_pkts++; - txq->tx_stats.count++; - txq->tx_tail++; + txq->tx_tail++; if (txq->tx_tail == MWL8K_TX_DESCS) txq->tx_tail = 0; + if (txq->tx_head == txq->tx_tail) ieee80211_stop_queue(hw, index); - if (priv->inconfig) { - /* - * Silently queue packet when we are in the middle of - * a config cycle. Notify firmware only if we are - * waiting for TXQs to empty. If a packet is sent - * before .config() is complete, perhaps it is better - * to drop the packet, as the channel is being changed - * and the packet will end up on the wrong channel. - */ - printk(KERN_ERR "%s(): WARNING TX activity while " - "in config\n", __func__); - - if (priv->tx_wait != NULL) - mwl8k_tx_start(priv); - } else - mwl8k_tx_start(priv); + mwl8k_tx_start(priv); spin_unlock_bh(&priv->tx_lock);