config CPU_EXYNOS4210
bool
- select S3C_PL330_DMA
+ select SAMSUNG_DMADEV
+ select ARM_CPU_SUSPEND if PM
help
Enable EXYNOS4210 CPU support
+config SOC_EXYNOS4212
+ bool
+ help
+ Enable EXYNOS4212 SoC support
+
+config SOC_EXYNOS4412
+ bool
+ help
+ Enable EXYNOS4412 SoC support
+
config EXYNOS4_MCT
bool
default y
menu "EXYNOS4 Machines"
+comment "EXYNOS4210 Boards"
+
config MACH_SMDKC210
bool "SMDKC210"
- select CPU_EXYNOS4210
- select S5P_DEV_FIMD0
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S3C_DEV_I2C1
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_BACKLIGHT
- select EXYNOS4_DEV_PD
- select EXYNOS4_DEV_SYSMMU
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_SDHCI
+ select MACH_SMDKV310
help
Machine support for Samsung SMDKC210
help
Machine support for Samsung Mobile NURI Board.
+config MACH_ORIGEN
+ bool "ORIGEN"
+ select CPU_EXYNOS4210
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S3C_DEV_HSMMC2
+ select EXYNOS4_SETUP_SDHCI
+ help
+ Machine support for ORIGEN based on Samsung EXYNOS4210
+
+comment "EXYNOS4212 Boards"
+
+config MACH_SMDK4212
+ bool "SMDK4212"
+ select SOC_EXYNOS4212
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S3C_DEV_I2C1
+ select S3C_DEV_I2C3
+ select S3C_DEV_I2C7
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_KEYPAD
+ select SAMSUNG_DEV_PWM
+ select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C3
+ select EXYNOS4_SETUP_I2C7
+ select EXYNOS4_SETUP_KEYPAD
+ select EXYNOS4_SETUP_SDHCI
+ help
+ Machine support for Samsung SMDK4212
+
+comment "EXYNOS4412 Boards"
+
+config MACH_SMDK4412
+ bool "SMDK4412"
+ select SOC_EXYNOS4412
+ select MACH_SMDK4212
+ help
+ Machine support for Samsung SMDK4412
+
endmenu
comment "Configuration for HSMMC bus width"
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/syscore_ops.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/sysmmu.h>
-
-static struct clk clk_sclk_hdmi27m = {
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4_clock_save[] = {
+ SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
+ SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
+ SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
+ SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
+ SAVE_ITEM(S5P_CLKSRC_TOP0),
+ SAVE_ITEM(S5P_CLKSRC_TOP1),
+ SAVE_ITEM(S5P_CLKSRC_CAM),
+ SAVE_ITEM(S5P_CLKSRC_TV),
+ SAVE_ITEM(S5P_CLKSRC_MFC),
+ SAVE_ITEM(S5P_CLKSRC_G3D),
+ SAVE_ITEM(S5P_CLKSRC_LCD0),
+ SAVE_ITEM(S5P_CLKSRC_MAUDIO),
+ SAVE_ITEM(S5P_CLKSRC_FSYS),
+ SAVE_ITEM(S5P_CLKSRC_PERIL0),
+ SAVE_ITEM(S5P_CLKSRC_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV_CAM),
+ SAVE_ITEM(S5P_CLKDIV_TV),
+ SAVE_ITEM(S5P_CLKDIV_MFC),
+ SAVE_ITEM(S5P_CLKDIV_G3D),
+ SAVE_ITEM(S5P_CLKDIV_LCD0),
+ SAVE_ITEM(S5P_CLKDIV_MAUDIO),
+ SAVE_ITEM(S5P_CLKDIV_FSYS0),
+ SAVE_ITEM(S5P_CLKDIV_FSYS1),
+ SAVE_ITEM(S5P_CLKDIV_FSYS2),
+ SAVE_ITEM(S5P_CLKDIV_FSYS3),
+ SAVE_ITEM(S5P_CLKDIV_PERIL0),
+ SAVE_ITEM(S5P_CLKDIV_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV_PERIL2),
+ SAVE_ITEM(S5P_CLKDIV_PERIL3),
+ SAVE_ITEM(S5P_CLKDIV_PERIL4),
+ SAVE_ITEM(S5P_CLKDIV_PERIL5),
+ SAVE_ITEM(S5P_CLKDIV_TOP),
+ SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
+ SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
+ SAVE_ITEM(S5P_CLKSRC_MASK_TV),
+ SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
+ SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
+ SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
+ SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
+ SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV2_RATIO),
+ SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
+ SAVE_ITEM(S5P_CLKGATE_IP_CAM),
+ SAVE_ITEM(S5P_CLKGATE_IP_TV),
+ SAVE_ITEM(S5P_CLKGATE_IP_MFC),
+ SAVE_ITEM(S5P_CLKGATE_IP_G3D),
+ SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
+ SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
+ SAVE_ITEM(S5P_CLKGATE_IP_GPS),
+ SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
+ SAVE_ITEM(S5P_CLKGATE_BLOCK),
+ SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
+ SAVE_ITEM(S5P_CLKSRC_DMC),
+ SAVE_ITEM(S5P_CLKDIV_DMC0),
+ SAVE_ITEM(S5P_CLKDIV_DMC1),
+ SAVE_ITEM(S5P_CLKGATE_IP_DMC),
+ SAVE_ITEM(S5P_CLKSRC_CPU),
+ SAVE_ITEM(S5P_CLKDIV_CPU),
+ SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
+ SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
+ SAVE_ITEM(S5P_CLKGATE_IP_CPU),
+};
+
+struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
.rate = 27000000,
};
-static struct clk clk_sclk_hdmiphy = {
+struct clk clk_sclk_hdmiphy = {
.name = "sclk_hdmiphy",
};
-static struct clk clk_sclk_usbphy0 = {
+struct clk clk_sclk_usbphy0 = {
.name = "sclk_usbphy0",
.rate = 27000000,
};
-static struct clk clk_sclk_usbphy1 = {
+struct clk clk_sclk_usbphy1 = {
.name = "sclk_usbphy1",
};
+ static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+ };
+
static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable);
return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable);
}
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable);
}
return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable);
}
-static int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable);
}
-static int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable);
}
.reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
};
-static struct clksrc_clk clk_sclk_apll = {
+struct clksrc_clk clk_sclk_apll = {
.clk = {
.name = "sclk_apll",
.parent = &clk_mout_apll.clk,
.reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
};
-static struct clksrc_clk clk_mout_epll = {
+struct clksrc_clk clk_mout_epll = {
.clk = {
.name = "mout_epll",
},
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
};
-static struct clksrc_clk clk_mout_mpll = {
+struct clksrc_clk clk_mout_mpll = {
.clk = {
.name = "mout_mpll",
},
.sources = &clk_src_mpll,
- .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 },
+
+ /* reg_src will be added in each SoCs' clock */
};
static struct clk *clkset_moutcore_list[] = {
/* Core list of CMU_CORE side */
-static struct clk *clkset_corebus_list[] = {
+struct clk *clkset_corebus_list[] = {
[0] = &clk_mout_mpll.clk,
[1] = &clk_sclk_apll.clk,
};
-static struct clksrc_sources clkset_mout_corebus = {
+struct clksrc_sources clkset_mout_corebus = {
.sources = clkset_corebus_list,
.nr_sources = ARRAY_SIZE(clkset_corebus_list),
};
/* Core list of CMU_TOP side */
-static struct clk *clkset_aclk_top_list[] = {
+struct clk *clkset_aclk_top_list[] = {
[0] = &clk_mout_mpll.clk,
[1] = &clk_sclk_apll.clk,
};
-static struct clksrc_sources clkset_aclk = {
+struct clksrc_sources clkset_aclk = {
.sources = clkset_aclk_top_list,
.nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
};
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
};
-static struct clksrc_clk clk_aclk_133 = {
+struct clksrc_clk clk_aclk_133 = {
.clk = {
.name = "aclk_133",
},
.nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list),
};
-static struct clksrc_clk clk_sclk_vpll = {
+struct clksrc_clk clk_sclk_vpll = {
.clk = {
.name = "sclk_vpll",
},
.devname = "exynos4-fb.0",
.enable = exynos4_clk_ip_lcd0_ctrl,
.ctrlbit = (1 << 0),
- }, {
- .name = "fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clk_ip_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "sataphy",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 3),
}, {
.name = "hsmmc",
.devname = "s3c-sdhci.0",
.parent = &clk_aclk_133.clk,
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 9),
- }, {
- .name = "sata",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 10),
}, {
- .name = "pdma",
+ .name = "dma",
.devname = "s3c-pl330.0",
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 0),
}, {
- .name = "pdma",
+ .name = "dma",
.devname = "s3c-pl330.1",
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 1),
.ctrlbit = (1 << 21),
}, {
.name = "ac97",
- .id = -1,
+ .devname = "samsung-ac97",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 27),
}, {
}
};
-static struct clk *clkset_group_list[] = {
+struct clk *clkset_group_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = &clk_xusbxti,
[2] = &clk_sclk_hdmi27m,
[8] = &clk_sclk_vpll.clk,
};
-static struct clksrc_sources clkset_group = {
+struct clksrc_sources clkset_group = {
.sources = clkset_group_list,
.nr_sources = ARRAY_SIZE(clkset_group_list),
};
.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
}, {
.clk = {
- .name = "sclk_cam",
- .devname = "exynos4-fimc.0",
+ .name = "sclk_cam0",
.enable = exynos4_clksrc_mask_cam_ctrl,
.ctrlbit = (1 << 16),
},
.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
}, {
.clk = {
- .name = "sclk_cam",
- .devname = "exynos4-fimc.1",
+ .name = "sclk_cam1",
.enable = exynos4_clksrc_mask_cam_ctrl,
.ctrlbit = (1 << 20),
},
.sources = &clkset_group,
.reg_src = { .reg = S5P_CLKSRC_LCD0, .shift = 0, .size = 4 },
.reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clksrc_mask_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_sata",
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &clkset_mout_corebus,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
}, {
.clk = {
.name = "sclk_spi",
static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
{
- return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508);
+ if (soc_is_exynos4210())
+ return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0),
+ pll_4508);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0));
+ else
+ return 0;
}
static struct clk_ops exynos4_fout_apll_ops = {
void __init_or_cpufreq exynos4_setup_clocks(void)
{
struct clk *xtal_clk;
- unsigned long apll;
- unsigned long mpll;
- unsigned long epll;
- unsigned long vpll;
+ unsigned long apll = 0;
+ unsigned long mpll = 0;
+ unsigned long epll = 0;
+ unsigned long vpll = 0;
unsigned long vpllsrc;
unsigned long xtal;
unsigned long armclk;
printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
- apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508);
- mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508);
- epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
- __raw_readl(S5P_EPLL_CON1), pll_4600);
-
- vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
- vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
- __raw_readl(S5P_VPLL_CON1), pll_4650);
+ if (soc_is_exynos4210()) {
+ apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0),
+ pll_4508);
+ mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0),
+ pll_4508);
+ epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
+ __raw_readl(S5P_EPLL_CON1), pll_4600);
+
+ vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+ vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+ __raw_readl(S5P_VPLL_CON1), pll_4650c);
+ } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+ apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0));
+ mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0));
+ epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0),
+ __raw_readl(S5P_EPLL_CON1));
+
+ vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+ vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+ __raw_readl(S5P_VPLL_CON1));
+ } else {
+ /* nothing */
+ }
clk_fout_apll.ops = &exynos4_fout_apll_ops;
clk_fout_mpll.rate = mpll;
/* Nothing here yet */
};
+#ifdef CONFIG_PM_SLEEP
+static int exynos4_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+ return 0;
+}
+
+static void exynos4_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+}
+
+#else
+#define exynos4_clock_suspend NULL
+#define exynos4_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4_clock_syscore_ops = {
+ .suspend = exynos4_clock_suspend,
+ .resume = exynos4_clock_resume,
+};
+
void __init exynos4_register_clocks(void)
{
int ptr;
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
++<<<<<<< HEAD
+ register_syscore_ops(&exynos4_clock_syscore_ops);
++=======
+ s3c24xx_register_clock(&dummy_apb_pclk);
+
++>>>>>>> 4598fc2c94b68740e0269db03c98a1e7ad5af773
s3c_pwmclk_init();
}
.name = "sdi",
.channels = MAP(S3C2412_DMAREQSEL_SDI),
.channels_rx = MAP(S3C2412_DMAREQSEL_SDI),
- .hw_addr.to = S3C2410_PA_SDI + S3C2410_SDIDATA,
- .hw_addr.from = S3C2410_PA_SDI + S3C2410_SDIDATA,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels = MAP(S3C2412_DMAREQSEL_SPI0TX),
.channels_rx = MAP(S3C2412_DMAREQSEL_SPI0RX),
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels = MAP(S3C2412_DMAREQSEL_SPI1TX),
.channels_rx = MAP(S3C2412_DMAREQSEL_SPI1RX),
- .hw_addr.to = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels = MAP(S3C2412_DMAREQSEL_UART0_0),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART0_0),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels = MAP(S3C2412_DMAREQSEL_UART1_0),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART1_0),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels = MAP(S3C2412_DMAREQSEL_UART2_0),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART2_0),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_UART0_SRC2] = {
.name = "uart0",
.channels = MAP(S3C2412_DMAREQSEL_UART0_1),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART0_1),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1_SRC2] = {
.name = "uart1",
.channels = MAP(S3C2412_DMAREQSEL_UART1_1),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART1_1),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2_SRC2] = {
.name = "uart2",
.channels = MAP(S3C2412_DMAREQSEL_UART2_1),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART2_1),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan,
struct s3c24xx_dma_map *map,
- enum s3c2410_dmasrc dir)
+ enum dma_data_direction dir)
{
unsigned long chsel;
- if (dir == S3C2410_DMASRC_HW)
+ if (dir == DMA_FROM_DEVICE)
chsel = map->channels_rx[0];
else
chsel = map->channels[0];
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
- #include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+ #include <linux/amba/bus.h>
+ #include <linux/amba/pl330.h>
+
+ #include <asm/irq.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/regs-clock.h>
+ #include <mach/dma.h>
+#include <plat/cpu.h>
#include <plat/devs.h>
- #include <plat/s3c-pl330-pdata.h>
+ #include <plat/irqs.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
- static struct resource s5p64x0_pdma_resource[] = {
- [0] = {
- .start = S5P64X0_PA_PDMA,
- .end = S5P64X0_PA_PDMA + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_DMA0,
- .end = IRQ_DMA0,
- .flags = IORESOURCE_IRQ,
+ struct dma_pl330_peri s5p6440_pdma_peri[22] = {
+ {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = DMACH_MAX,
+ }, {
+ .peri_id = DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
},
};
- static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_UART3_RX,
- [7] = DMACH_UART3_TX,
- [8] = DMACH_MAX,
- [9] = DMACH_MAX,
- [10] = DMACH_PCM0_TX,
- [11] = DMACH_PCM0_RX,
- [12] = DMACH_I2S0_TX,
- [13] = DMACH_I2S0_RX,
- [14] = DMACH_SPI0_TX,
- [15] = DMACH_SPI0_RX,
- [16] = DMACH_MAX,
- [17] = DMACH_MAX,
- [18] = DMACH_MAX,
- [19] = DMACH_MAX,
- [20] = DMACH_SPI1_TX,
- [21] = DMACH_SPI1_RX,
- [22] = DMACH_MAX,
- [23] = DMACH_MAX,
- [24] = DMACH_MAX,
- [25] = DMACH_MAX,
- [26] = DMACH_MAX,
- [27] = DMACH_MAX,
- [28] = DMACH_MAX,
- [29] = DMACH_PWM,
- [30] = DMACH_MAX,
- [31] = DMACH_MAX,
- },
+ struct dma_pl330_platdata s5p6440_pdma_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
+ .peri = s5p6440_pdma_peri,
};
- static struct s3c_pl330_platdata s5p6450_pdma_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_UART3_RX,
- [7] = DMACH_UART3_TX,
- [8] = DMACH_UART4_RX,
- [9] = DMACH_UART4_TX,
- [10] = DMACH_PCM0_TX,
- [11] = DMACH_PCM0_RX,
- [12] = DMACH_I2S0_TX,
- [13] = DMACH_I2S0_RX,
- [14] = DMACH_SPI0_TX,
- [15] = DMACH_SPI0_RX,
- [16] = DMACH_PCM1_TX,
- [17] = DMACH_PCM1_RX,
- [18] = DMACH_PCM2_TX,
- [19] = DMACH_PCM2_RX,
- [20] = DMACH_SPI1_TX,
- [21] = DMACH_SPI1_RX,
- [22] = DMACH_USI_TX,
- [23] = DMACH_USI_RX,
- [24] = DMACH_MAX,
- [25] = DMACH_I2S1_TX,
- [26] = DMACH_I2S1_RX,
- [27] = DMACH_I2S2_TX,
- [28] = DMACH_I2S2_RX,
- [29] = DMACH_PWM,
- [30] = DMACH_UART5_RX,
- [31] = DMACH_UART5_TX,
+ struct dma_pl330_peri s5p6450_pdma_peri[32] = {
+ {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART4_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART4_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_USI_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_USI_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PWM,
+ }, {
+ .peri_id = (u8)DMACH_UART5_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART5_TX,
+ .rqtype = MEMTODEV,
},
};
- static struct platform_device s5p64x0_device_pdma = {
- .name = "s3c-pl330",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource),
- .resource = s5p64x0_pdma_resource,
- .dev = {
+ struct dma_pl330_platdata s5p6450_pdma_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
+ .peri = s5p6450_pdma_peri,
+ };
+
+ struct amba_device s5p64x0_device_pdma = {
+ .dev = {
+ .init_name = "dma-pl330",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
+ .res = {
+ .start = S5P64X0_PA_PDMA,
+ .end = S5P64X0_PA_PDMA + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_DMA0, NO_IRQ},
+ .periphid = 0x00041330,
};
static int __init s5p64x0_dma_init(void)
{
- unsigned int id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
-
- if (id == 0x50000)
+ if (soc_is_s5p6450())
s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
else
s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
- platform_device_register(&s5p64x0_device_pdma);
+ amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
return 0;
}
config CPU_S5PV210
bool
- select S3C_PL330_DMA
+ select SAMSUNG_DMADEV
select S5P_EXT_INT
select S5P_HRT
- select S5PV210_PM if PM
help
Enable S5PV210 CPU support
endmenu
-config S5PV210_PM
- bool
- help
- Power Management code common to S5PV210
-
endif
.name = "pcmcdclk",
};
+ static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+ };
+
static struct clk *clkset_vpllsrc_list[] = {
[0] = &clk_fin_vpll,
[1] = &clk_sclk_hdmi27m,
static struct clk init_clocks_off[] = {
{
- .name = "pdma",
+ .name = "dma",
.devname = "s3c-pl330.0",
.parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 3),
}, {
- .name = "pdma",
+ .name = "dma",
.devname = "s3c-pl330.1",
.parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
}, {
.clk = {
- .name = "sclk_cam",
- .devname = "s5pv210-fimc.0",
+ .name = "sclk_cam0",
.enable = s5pv210_clk_mask0_ctrl,
.ctrlbit = (1 << 3),
},
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
}, {
.clk = {
- .name = "sclk_cam",
- .devname = "s5pv210-fimc.1",
+ .name = "sclk_cam1",
.enable = s5pv210_clk_mask0_ctrl,
.ctrlbit = (1 << 4),
},
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}
help
Internal configuration to build the VIC timer interrupt code.
-config SAMSUNG_IRQ_UART
- bool
- help
- Internal configuration to build the IRQ UART demux code.
-
# options for gpio configuration support
config SAMSUNG_GPIOLIB_4BIT
help
Internal configuration for S3C DMA core
- config S3C_PL330_DMA
+ config SAMSUNG_DMADEV
bool
- select PL330
+ select DMADEVICES
+ select PL330_DMA if (CPU_EXYNOS4210 || CPU_S5PV210 || CPU_S5PC100 || \
+ CPU_S5P6450 || CPU_S5P6440)
+ select ARM_AMBA
help
- S3C DMA API Driver for PL330 DMAC.
+ Use DMA device engine for PL330 DMAC.
comment "Power management"
help
Say Y here if you want to control Power Domain by Runtime PM.
+config DEBUG_S3C_UART
+ depends on PLAT_SAMSUNG
+ int
+ default "0" if DEBUG_S3C_UART0
+ default "1" if DEBUG_S3C_UART1
+ default "2" if DEBUG_S3C_UART2
+
endif
# Objects we always build independent of SoC choice
-obj-y += init.o
+obj-y += init.o cpu.o
obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
obj-y += clock.o
obj-y += pwm-clock.o
obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o
-obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o
obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
# ADC
# DMA support
- obj-$(CONFIG_S3C_DMA) += dma.o
+ obj-$(CONFIG_S3C_DMA) += dma.o s3c-dma-ops.o
- obj-$(CONFIG_S3C_PL330_DMA) += s3c-pl330.o
+ obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o
# PM support
#define DMA_CH_VALID (1<<31)
#define DMA_CH_NEVER (1<<30)
-struct s3c24xx_dma_addr {
- unsigned long from;
- unsigned long to;
-};
-
/* struct s3c24xx_dma_map
*
* this holds the mapping information for the channel selected
struct s3c24xx_dma_map {
const char *name;
- struct s3c24xx_dma_addr hw_addr;
unsigned long channels[S3C_DMA_CHANNELS];
unsigned long channels_rx[S3C_DMA_CHANNELS];
void (*direction)(struct s3c2410_dma_chan *chan,
struct s3c24xx_dma_map *map,
- enum s3c2410_dmasrc dir);
+ enum dma_data_direction dir);
};
extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
{
if (host->sdio_irqen) {
if (gpio_get_value(S3C2410_GPE(8)) == 0) {
- printk(KERN_DEBUG "%s: signalling irq\n", __func__);
+ pr_debug("%s: signalling irq\n", __func__);
mmc_signal_sdio_irq(host->mmc);
}
}
local_irq_save(flags);
- //printk(KERN_DEBUG "%s: transfer %d\n", __func__, transfer);
+ /* pr_debug("%s: transfer %d\n", __func__, transfer); */
host->irq_disabled = transfer;
}
static void s3cmci_dma_setup(struct s3cmci_host *host,
- enum s3c2410_dmasrc source)
+ enum dma_data_direction source)
{
- static enum s3c2410_dmasrc last_source = -1;
+ static enum dma_data_direction last_source = -1;
static int setup_ok;
if (last_source == source)
BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
- s3cmci_dma_setup(host, rw ? S3C2410_DMASRC_MEM : S3C2410_DMASRC_HW);
+ s3cmci_dma_setup(host, rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
#include <linux/ctype.h>
#include <linux/err.h>
#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
#endif
struct notifier_block freq_transition;
+
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+ unsigned short saved_smr;
+ unsigned short saved_fcr;
+ unsigned char saved_brr;
+#endif
};
/* Function prototypes */
/* This routine is used for getting signals of: DTR, DCD, DSR, RI,
and CTS/RTS */
- return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR;
+ return TIOCM_DTR | TIOCM_RTS | TIOCM_CTS | TIOCM_DSR;
}
#ifdef CONFIG_SERIAL_SH_SCI_DMA
dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__,
param->slave_id);
- if (param->dma_dev == chan->device->dev) {
- chan->private = param;
- return true;
- } else {
- return false;
- }
+ chan->private = param;
+ return true;
}
static void rx_timer_fn(unsigned long arg)
dma_cap_mask_t mask;
int nent;
- dev_dbg(port->dev, "%s: port %d DMA %p\n", __func__,
- port->line, s->cfg->dma_dev);
+ dev_dbg(port->dev, "%s: port %d\n", __func__,
+ port->line);
- if (!s->cfg->dma_dev)
+ if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0)
return;
dma_cap_zero(mask);
/* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */
param->slave_id = s->cfg->dma_slave_tx;
- param->dma_dev = s->cfg->dma_dev;
s->cookie_tx = -EINVAL;
chan = dma_request_channel(mask, filter, param);
/* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */
param->slave_id = s->cfg->dma_slave_rx;
- param->dma_dev = s->cfg->dma_dev;
chan = dma_request_channel(mask, filter, param);
dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan);
{
struct sci_port *s = to_sci_port(port);
- if (!s->cfg->dma_dev)
- return;
-
if (s->chan_tx)
sci_tx_dma_release(s, false);
if (s->chan_rx)
return ((freq + 16 * bps) / (32 * bps) - 1);
}
+static void sci_reset(struct uart_port *port)
+{
+ unsigned int status;
+
+ do {
+ status = sci_in(port, SCxSR);
+ } while (!(status & SCxSR_TEND(port)));
+
+ sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
+
+ if (port->type != PORT_SCI)
+ sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+}
+
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
struct sci_port *s = to_sci_port(port);
- unsigned int status, baud, smr_val, max_baud;
+ unsigned int baud, smr_val, max_baud;
int t = -1;
u16 scfcr = 0;
sci_port_enable(s);
- do {
- status = sci_in(port, SCxSR);
- } while (!(status & SCxSR_TEND(port)));
-
- sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
-
- if (port->type != PORT_SCI)
- sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST);
+ sci_reset(port);
smr_val = sci_in(port, SCSMR) & 3;
* For the muxed case there's nothing more to do.
*/
port->irq = p->irqs[SCIx_RXI_IRQ];
- port->irqflags = IRQF_DISABLED;
+ port->irqflags = 0;
port->serial_in = sci_serial_in;
port->serial_out = sci_serial_out;
- if (p->dma_dev)
- dev_dbg(port->dev, "DMA device %p, tx %d, rx %d\n",
- p->dma_dev, p->dma_slave_tx, p->dma_slave_rx);
+ if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0)
+ dev_dbg(port->dev, "DMA tx %d, rx %d\n",
+ p->dma_slave_tx, p->dma_slave_rx);
return 0;
}
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
- /* TODO: disable clock */
+ sci_port_disable(sci_port);
+
return uart_set_options(port, co, baud, parity, bits, flow);
}
return 0;
}
+#define uart_console(port) ((port)->cons->index == (port)->line)
+
+static int sci_runtime_suspend(struct device *dev)
+{
+ struct sci_port *sci_port = dev_get_drvdata(dev);
+ struct uart_port *port = &sci_port->port;
+
+ if (uart_console(port)) {
+ sci_port->saved_smr = sci_in(port, SCSMR);
+ sci_port->saved_brr = sci_in(port, SCBRR);
+ sci_port->saved_fcr = sci_in(port, SCFCR);
+ }
+ return 0;
+}
+
+static int sci_runtime_resume(struct device *dev)
+{
+ struct sci_port *sci_port = dev_get_drvdata(dev);
+ struct uart_port *port = &sci_port->port;
+
+ if (uart_console(port)) {
+ sci_reset(port);
+ sci_out(port, SCSMR, sci_port->saved_smr);
+ sci_out(port, SCBRR, sci_port->saved_brr);
+ sci_out(port, SCFCR, sci_port->saved_fcr);
+ sci_out(port, SCSCR, sci_port->cfg->scscr);
+ }
+ return 0;
+}
+
#define SCI_CONSOLE (&serial_console)
#else
}
#define SCI_CONSOLE NULL
+#define sci_runtime_suspend NULL
+#define sci_runtime_resume NULL
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
}
static const struct dev_pm_ops sci_dev_pm_ops = {
+ .runtime_suspend = sci_runtime_suspend,
+ .runtime_resume = sci_runtime_resume,
.suspend = sci_suspend,
.resume = sci_resume,
};
writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
- s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
+ if (!dma_data->ops)
+ dma_data->ops = samsung_dma_get_ops();
+
+ dma_data->ops->started(dma_data->channel);
return 0;
}
writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
- s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
+ if (!dma_data->ops)
+ dma_data->ops = samsung_dma_get_ops();
+
+ dma_data->ops->started(dma_data->channel);
return 0;
}
}
ret = request_irq(irq_res->start, s3c_ac97_irq,
- IRQF_DISABLED, "AC97", NULL);
+ 0, "AC97", NULL);
if (ret < 0) {
dev_err(&pdev->dev, "ac97: interrupt request failed.\n");
goto err4;
static struct platform_driver s3c_ac97_driver = {
.probe = s3c_ac97_probe,
- .remove = s3c_ac97_remove,
+ .remove = __devexit_p(s3c_ac97_remove),
.driver = {
.name = "samsung-ac97",
.owner = THIS_MODULE,
git.openpandora.org / pandora-kernel.git / commitdiff