power: twl4030_charger: find associated phy by more reliable means.

twl4030_charger currently finds the associated phy
using usb_get_phy() which will return the first USB2 phy.
If your platform has multiple such phys (as mine does),
this is not reliable (and reliably fails on the GTA04).

Change to use devm_usb_get_phy_by_node(), having found the
node by looking for an appropriately named sibling in
device-tree.

This makes usb-charging dependent on correct device-tree
configuration.

Acked-By: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>

diff --git a/Documentation/devicetree/bindings/power/twl-charger.txt b/Documentation/devicetree/bindings/power/twl-charger.txt
index d5c7062..3b4ea1b 100644 (file)
--- a/Documentation/devicetree/bindings/power/twl-charger.txt
+++ b/Documentation/devicetree/bindings/power/twl-charger.txt
@@ -1,5 +1,15 @@
 TWL BCI (Battery Charger Interface)
 
+The battery charger needs to interact with the USB phy in order
+to know when charging is permissible, and when there is a connection
+or disconnection.
+
+The choice of phy cannot be configured at a hardware level, so there
+is no value in explicit configuration in device-tree.  Rather
+if there is a sibling of the BCI node which is compatible with
+"ti,twl4030-usb", then that is used to determine when and how
+use USB power for charging.
+
 Required properties:
 - compatible:
   - "ti,twl4030-bci"

diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
index 0aee0ad..17327a2 100644 (file)
--- a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
@@ -30,6 +30,9 @@ TWL4030 USB PHY AND COMPARATOR
  - usb_mode : The mode used by the phy to connect to the controller. "1"
    specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode.
 
+If a sibling node is compatible "ti,twl4030-bci", then it will find
+this device and query it for USB power status.
+
 twl4030-usb {
        compatible = "ti,twl4030-usb";
        interrupts = < 10 4 >;

diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
index 02a522c..022b891 100644 (file)
--- a/drivers/power/twl4030_charger.c
+++ b/drivers/power/twl4030_charger.c
@@ -638,10 +638,15 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 
        INIT_WORK(&bci->work, twl4030_bci_usb_work);
 
-       bci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
-       if (!IS_ERR_OR_NULL(bci->transceiver)) {
-               bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
-               usb_register_notifier(bci->transceiver, &bci->usb_nb);
+       bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
+       if (bci->dev->of_node) {
+               struct device_node *phynode;
+
+               phynode = of_find_compatible_node(bci->dev->of_node->parent,
+                                                 NULL, "ti,twl4030-usb");
+               if (phynode)
+                       bci->transceiver = devm_usb_get_phy_by_node(
+                               bci->dev, phynode, &bci->usb_nb);
        }
 
        /* Enable interrupts now. */
@@ -671,10 +676,6 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
        return 0;
 
 fail_unmask_interrupts:
-       if (!IS_ERR_OR_NULL(bci->transceiver)) {
-               usb_unregister_notifier(bci->transceiver, &bci->usb_nb);
-               usb_put_phy(bci->transceiver);
-       }
        free_irq(bci->irq_bci, bci);
 fail_bci_irq:
        free_irq(bci->irq_chg, bci);
@@ -703,10 +704,6 @@ static int __exit twl4030_bci_remove(struct platform_device *pdev)
        twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
                         TWL4030_INTERRUPTS_BCIIMR2A);
 
-       if (!IS_ERR_OR_NULL(bci->transceiver)) {
-               usb_unregister_notifier(bci->transceiver, &bci->usb_nb);
-               usb_put_phy(bci->transceiver);
-       }
        free_irq(bci->irq_bci, bci);
        free_irq(bci->irq_chg, bci);
        power_supply_unregister(bci->usb);