--- /dev/null
+What: /sys/class/scsi_host/hostX/isci_id
+Date: June 2011
+Contact: Dave Jiang <dave.jiang@intel.com>
+Description:
+ This file contains the enumerated host ID for the Intel
+ SCU controller. The Intel(R) C600 Series Chipset SATA/SAS
+ Storage Control Unit embeds up to two 4-port controllers in
+ a single PCI device. The controllers are enumerated in order
+ which usually means the lowest number scsi_host corresponds
+ with the first controller, but this association is not
+ guaranteed. The 'isci_id' attribute unambiguously identifies
+ the controller index: '0' for the first controller,
+ '1' for the second.
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-h264-vui-sar-idc">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC</constant> </entry>
<entry>enum v4l2_mpeg_video_h264_vui_sar_idc</entry>
</row>
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-h264-level">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_LEVEL</constant> </entry>
<entry>enum v4l2_mpeg_video_h264_level</entry>
</row>
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-mpeg4-level">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL</constant> </entry>
<entry>enum v4l2_mpeg_video_mpeg4_level</entry>
</row>
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-h264-profile">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_PROFILE</constant> </entry>
- <entry>enum v4l2_mpeg_h264_profile</entry>
+ <entry>enum v4l2_mpeg_video_h264_profile</entry>
</row>
<row><entry spanname="descr">The profile information for H264.
Applicable to the H264 encoder.
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-mpeg4-profile">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE</constant> </entry>
- <entry>enum v4l2_mpeg_mpeg4_profile</entry>
+ <entry>enum v4l2_mpeg_video_mpeg4_profile</entry>
</row>
<row><entry spanname="descr">The profile information for MPEG4.
Applicable to the MPEG4 encoder.
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-multi-slice-mode">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE</constant> </entry>
- <entry>enum v4l2_mpeg_multi_slice_mode</entry>
+ <entry>enum v4l2_mpeg_video_multi_slice_mode</entry>
</row>
<row><entry spanname="descr">Determines how the encoder should handle division of frame into slices.
Applicable to the encoder.
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-h264-loop-filter-mode">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE</constant> </entry>
- <entry>enum v4l2_mpeg_h264_loop_filter_mode</entry>
+ <entry>enum v4l2_mpeg_video_h264_loop_filter_mode</entry>
</row>
<row><entry spanname="descr">Loop filter mode for H264 encoder.
Possible values are:</entry>
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-h264-entropy-mode">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE</constant> </entry>
- <entry>enum v4l2_mpeg_h264_symbol_mode</entry>
+ <entry>enum v4l2_mpeg_video_h264_entropy_mode</entry>
</row>
<row><entry spanname="descr">Entropy coding mode for H264 - CABAC/CAVALC.
Applicable to the H264 encoder.
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-header-mode">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_HEADER_MODE</constant> </entry>
- <entry>enum v4l2_mpeg_header_mode</entry>
+ <entry>enum v4l2_mpeg_video_header_mode</entry>
</row>
<row><entry spanname="descr">Determines whether the header is returned as the first buffer or is
it returned together with the first frame. Applicable to encoders.
Applicable to the H264 encoder.</entry>
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-mfc51-video-frame-skip-mode">
<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE</constant> </entry>
- <entry>enum v4l2_mpeg_mfc51_frame_skip_mode</entry>
+ <entry>enum v4l2_mpeg_mfc51_video_frame_skip_mode</entry>
</row>
<row><entry spanname="descr">
Indicates in what conditions the encoder should skip frames. If encoding a frame would cause the encoded stream to be larger then
</entry>
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-mfc51-video-force-frame-type">
<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE</constant> </entry>
- <entry>enum v4l2_mpeg_mfc51_force_frame_type</entry>
+ <entry>enum v4l2_mpeg_mfc51_video_force_frame_type</entry>
</row>
<row><entry spanname="descr">Force a frame type for the next queued buffer. Applicable to encoders.
Possible values are:</entry>
5.2 stat file
-5.2.1 memory.stat file includes following statistics
+memory.stat file includes following statistics
# per-memory cgroup local status
cache - # of bytes of page cache memory.
file_mapped is accounted only when the memory cgroup is owner of page
cache.)
-5.2.2 memory.vmscan_stat
-
-memory.vmscan_stat includes statistics information for memory scanning and
-freeing, reclaiming. The statistics shows memory scanning information since
-memory cgroup creation and can be reset to 0 by writing 0 as
-
- #echo 0 > ../memory.vmscan_stat
-
-This file contains following statistics.
-
-[param]_[file_or_anon]_pages_by_[reason]_[under_heararchy]
-[param]_elapsed_ns_by_[reason]_[under_hierarchy]
-
-For example,
-
- scanned_file_pages_by_limit indicates the number of scanned
- file pages at vmscan.
-
-Now, 3 parameters are supported
-
- scanned - the number of pages scanned by vmscan
- rotated - the number of pages activated at vmscan
- freed - the number of pages freed by vmscan
-
-If "rotated" is high against scanned/freed, the memcg seems busy.
-
-Now, 2 reason are supported
-
- limit - the memory cgroup's limit
- system - global memory pressure + softlimit
- (global memory pressure not under softlimit is not handled now)
-
-When under_hierarchy is added in the tail, the number indicates the
-total memcg scan of its children and itself.
-
-elapsed_ns is a elapsed time in nanosecond. This may include sleep time
-and not indicates CPU usage. So, please take this as just showing
-latency.
-
-Here is an example.
-
-# cat /cgroup/memory/A/memory.vmscan_stat
-scanned_pages_by_limit 9471864
-scanned_anon_pages_by_limit 6640629
-scanned_file_pages_by_limit 2831235
-rotated_pages_by_limit 4243974
-rotated_anon_pages_by_limit 3971968
-rotated_file_pages_by_limit 272006
-freed_pages_by_limit 2318492
-freed_anon_pages_by_limit 962052
-freed_file_pages_by_limit 1356440
-elapsed_ns_by_limit 351386416101
-scanned_pages_by_system 0
-scanned_anon_pages_by_system 0
-scanned_file_pages_by_system 0
-rotated_pages_by_system 0
-rotated_anon_pages_by_system 0
-rotated_file_pages_by_system 0
-freed_pages_by_system 0
-freed_anon_pages_by_system 0
-freed_file_pages_by_system 0
-elapsed_ns_by_system 0
-scanned_pages_by_limit_under_hierarchy 9471864
-scanned_anon_pages_by_limit_under_hierarchy 6640629
-scanned_file_pages_by_limit_under_hierarchy 2831235
-rotated_pages_by_limit_under_hierarchy 4243974
-rotated_anon_pages_by_limit_under_hierarchy 3971968
-rotated_file_pages_by_limit_under_hierarchy 272006
-freed_pages_by_limit_under_hierarchy 2318492
-freed_anon_pages_by_limit_under_hierarchy 962052
-freed_file_pages_by_limit_under_hierarchy 1356440
-elapsed_ns_by_limit_under_hierarchy 351386416101
-scanned_pages_by_system_under_hierarchy 0
-scanned_anon_pages_by_system_under_hierarchy 0
-scanned_file_pages_by_system_under_hierarchy 0
-rotated_pages_by_system_under_hierarchy 0
-rotated_anon_pages_by_system_under_hierarchy 0
-rotated_file_pages_by_system_under_hierarchy 0
-freed_pages_by_system_under_hierarchy 0
-freed_anon_pages_by_system_under_hierarchy 0
-freed_file_pages_by_system_under_hierarchy 0
-elapsed_ns_by_system_under_hierarchy 0
-
5.3 swappiness
Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
interface that was used by acer-wmi driver. It will replaced by
information log when acer-wmi initial.
Who: Lee, Chun-Yi <jlee@novell.com>
+
+----------------------------
+What: The XFS nodelaylog mount option
+When: 3.3
+Why: The delaylog mode that has been the default since 2.6.39 has proven
+ stable, and the old code is in the way of additional improvements in
+ the log code.
+Who: Christoph Hellwig <hch@lst.de>
All Sysfs entries are named with their core_id (represented here by 'X').
tempX_input - Core temperature (in millidegrees Celsius).
tempX_max - All cooling devices should be turned on (on Core2).
- Initialized with IA32_THERM_INTERRUPT. When the CPU
- temperature reaches this temperature, an interrupt is
- generated and tempX_max_alarm is set.
-tempX_max_hyst - If the CPU temperature falls below than temperature,
- an interrupt is generated and tempX_max_alarm is reset.
-tempX_max_alarm - Set if the temperature reaches or exceeds tempX_max.
- Reset if the temperature drops to or below tempX_max_hyst.
tempX_crit - Maximum junction temperature (in millidegrees Celsius).
tempX_crit_alarm - Set when Out-of-spec bit is set, never clears.
Correct CPU operation is no longer guaranteed.
number. For Package temp, this will be "Physical id Y",
where Y is the package number.
-The TjMax temperature is set to 85 degrees C if undocumented model specific
-register (UMSR) 0xee has bit 30 set. If not the TjMax is 100 degrees C as
-(sometimes) documented in processor datasheet.
+On CPU models which support it, TjMax is read from a model-specific register.
+On other models, it is set to an arbitrary value based on weak heuristics.
+If these heuristics don't work for you, you can pass the correct TjMax value
+as a module parameter (tjmax).
Appendix A. Known TjMax lists (TBD):
Some information comes from ark.intel.com
the devices explicitly. Please see Documentation/i2c/instantiating-devices for
details.
+WARNING: Do not access chip registers using the i2cdump command, and do not use
+any of the i2ctools commands on a command register (0xa5 to 0xac). The chips
+supported by this driver interpret any access to a command register (including
+read commands) as request to execute the command in question. This may result in
+power loss, board resets, and/or Flash corruption. Worst case, your board may
+turn into a brick.
+
Sysfs entries
-------------
<mailto:thomas@winischhofer.net>
0xF4 00-1F video/mbxfb.h mbxfb
<mailto:raph@8d.com>
+0xF6 all LTTng Linux Trace Toolkit Next Generation
+ <mailto:mathieu.desnoyers@efficios.com>
0xFD all linux/dm-ioctl.h
Override pmtimer IOPort with a hex value.
e.g. pmtmr=0x508
- pnp.debug [PNP]
- Enable PNP debug messages. This depends on the
- CONFIG_PNP_DEBUG_MESSAGES option.
+ pnp.debug=1 [PNP]
+ Enable PNP debug messages (depends on the
+ CONFIG_PNP_DEBUG_MESSAGES option). Change at run-time
+ via /sys/module/pnp/parameters/debug. We always show
+ current resource usage; turning this on also shows
+ possible settings and some assignment information.
pnpacpi= [ACPI]
{ off }
+Note: This driver doesn't have a maintainer.
+
Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux.
This program is free software; you can redistribute it and/or
Authors:
Sten Wang <sten_wang@davicom.com.tw > : Original Author
-Tobias Ringstrom <tori@unhappy.mine.nu> : Current Maintainer
Contributors:
khugepaged runs usually at low frequency so while one may not want to
invoke defrag algorithms synchronously during the page faults, it
should be worth invoking defrag at least in khugepaged. However it's
-also possible to disable defrag in khugepaged:
+also possible to disable defrag in khugepaged by writing 0 or enable
+defrag in khugepaged by writing 1:
-echo yes >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
-echo no >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
+echo 0 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
+echo 1 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
You can also control how many pages khugepaged should scan at each
pass:
ATLX ETHERNET DRIVERS
M: Jay Cliburn <jcliburn@gmail.com>
M: Chris Snook <chris.snook@gmail.com>
-M: Jie Yang <jie.yang@atheros.com>
L: netdev@vger.kernel.org
W: http://sourceforge.net/projects/atl1
W: http://atl1.sourceforge.net
BROCADE BNA 10 GIGABIT ETHERNET DRIVER
M: Rasesh Mody <rmody@brocade.com>
-M: Debashis Dutt <ddutt@brocade.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/bna/
CISCO VIC ETHERNET NIC DRIVER
M: Christian Benvenuti <benve@cisco.com>
-M: Vasanthy Kolluri <vkolluri@cisco.com>
M: Roopa Prabhu <roprabhu@cisco.com>
M: David Wang <dwang2@cisco.com>
S: Supported
F: drivers/input/input-mt.c
K: \b(ABS|SYN)_MT_
+INTEL C600 SERIES SAS CONTROLLER DRIVER
+M: Intel SCU Linux support <intel-linux-scu@intel.com>
+M: Dan Williams <dan.j.williams@intel.com>
+M: Dave Jiang <dave.jiang@intel.com>
+M: Ed Nadolski <edmund.nadolski@intel.com>
+L: linux-scsi@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git
+S: Maintained
+F: drivers/scsi/isci/
+F: firmware/isci/
+
INTEL IDLE DRIVER
M: Len Brown <lenb@kernel.org>
L: linux-pm@lists.linux-foundation.org
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git
S: Supported
F: include/linux/netfilter*
F: include/linux/netfilter/
OSD LIBRARY and FILESYSTEM
M: Boaz Harrosh <bharrosh@panasas.com>
-M: Benny Halevy <bhalevy@panasas.com>
+M: Benny Halevy <bhalevy@tonian.com>
L: osd-dev@open-osd.org
W: http://open-osd.org
T: git git://git.open-osd.org/open-osd.git
S: Supported
F: Documentation/hwmon/wm83??
F: drivers/leds/leds-wm83*.c
+F: drivers/input/misc/wm831x-on.c
+F: drivers/input/touchscreen/wm831x-ts.c
+F: drivers/input/touchscreen/wm97*.c
F: drivers/mfd/wm8*.c
F: drivers/power/wm83*.c
F: drivers/rtc/rtc-wm83*.c
F: include/linux/mfd/wm831x/
F: include/linux/mfd/wm8350/
F: include/linux/mfd/wm8400*
+F: include/linux/wm97xx.h
F: include/sound/wm????.h
F: sound/soc/codecs/wm*
VERSION = 3
PATCHLEVEL = 1
SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc8
NAME = "Divemaster Edition"
# *DOCUMENTATION*
def_bool y
config GENERIC_GPIO
- def_bool y
+ bool
config ZONE_DMA
bool
processor into full low interrupt latency mode. ARM11MPCore
is not affected.
+config ARM_ERRATA_764369
+ bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for erratum 764369
+ affecting Cortex-A9 MPCore with two or more processors (all
+ current revisions). Under certain timing circumstances, a data
+ cache line maintenance operation by MVA targeting an Inner
+ Shareable memory region may fail to proceed up to either the
+ Point of Coherency or to the Point of Unification of the
+ system. This workaround adds a DSB instruction before the
+ relevant cache maintenance functions and sets a specific bit
+ in the diagnostic control register of the SCU.
+
endmenu
source "arch/arm/common/Kconfig"
};
sdhci@c8000200 {
- gpios = <&gpio 69 0>, /* cd, gpio PI5 */
- <&gpio 57 0>, /* wp, gpio PH1 */
- <&gpio 155 0>; /* power, gpio PT3 */
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 155 0>; /* gpio PT3 */
};
sdhci@c8000600 {
- gpios = <&gpio 58 0>, /* cd, gpio PH2 */
- <&gpio 59 0>, /* wp, gpio PH3 */
- <&gpio 70 0>; /* power, gpio PI6 */
+ cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+ wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+ power-gpios = <&gpio 70 0>; /* gpio PI6 */
};
};
};
sdhci@c8000400 {
- gpios = <&gpio 69 0>, /* cd, gpio PI5 */
- <&gpio 57 0>, /* wp, gpio PH1 */
- <&gpio 70 0>; /* power, gpio PI6 */
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 70 0>; /* gpio PI6 */
};
};
#ifdef CONFIG_SMP
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \
smp_mb(); \
__asm__ __volatile__( \
- "1: ldrex %1, [%2]\n" \
+ "1: ldrex %1, [%3]\n" \
" " insn "\n" \
- "2: strex %1, %0, [%2]\n" \
- " teq %1, #0\n" \
+ "2: strex %2, %0, [%3]\n" \
+ " teq %2, #0\n" \
" bne 1b\n" \
" mov %0, #0\n" \
- __futex_atomic_ex_table("%4") \
- : "=&r" (ret), "=&r" (oldval) \
+ __futex_atomic_ex_table("%5") \
+ : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \
: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \
: "cc", "memory")
#include <linux/preempt.h>
#include <asm/domain.h>
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \
__asm__ __volatile__( \
- "1: " T(ldr) " %1, [%2]\n" \
+ "1: " T(ldr) " %1, [%3]\n" \
" " insn "\n" \
- "2: " T(str) " %0, [%2]\n" \
+ "2: " T(str) " %0, [%3]\n" \
" mov %0, #0\n" \
- __futex_atomic_ex_table("%4") \
- : "=&r" (ret), "=&r" (oldval) \
+ __futex_atomic_ex_table("%5") \
+ : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \
: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \
: "cc", "memory")
int cmp = (encoded_op >> 24) & 15;
int oparg = (encoded_op << 8) >> 20;
int cmparg = (encoded_op << 20) >> 20;
- int oldval = 0, ret;
+ int oldval = 0, ret, tmp;
if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
oparg = 1 << oparg;
switch (op) {
case FUTEX_OP_SET:
- __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("mov %0, %4", ret, oldval, tmp, uaddr, oparg);
break;
case FUTEX_OP_ADD:
- __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("add %0, %1, %4", ret, oldval, tmp, uaddr, oparg);
break;
case FUTEX_OP_OR:
- __futex_atomic_op("orr %0, %1, %3", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("orr %0, %1, %4", ret, oldval, tmp, uaddr, oparg);
break;
case FUTEX_OP_ANDN:
- __futex_atomic_op("and %0, %1, %3", ret, oldval, uaddr, ~oparg);
+ __futex_atomic_op("and %0, %1, %4", ret, oldval, tmp, uaddr, ~oparg);
break;
case FUTEX_OP_XOR:
- __futex_atomic_op("eor %0, %1, %3", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("eor %0, %1, %4", ret, oldval, tmp, uaddr, oparg);
break;
default:
ret = -ENOSYS;
#define L2X0_CLEAN_INV_LINE_PA 0x7F0
#define L2X0_CLEAN_INV_LINE_IDX 0x7F8
#define L2X0_CLEAN_INV_WAY 0x7FC
-#define L2X0_LOCKDOWN_WAY_D 0x900
-#define L2X0_LOCKDOWN_WAY_I 0x904
+/*
+ * The lockdown registers repeat 8 times for L310, the L210 has only one
+ * D and one I lockdown register at 0x0900 and 0x0904.
+ */
+#define L2X0_LOCKDOWN_WAY_D_BASE 0x900
+#define L2X0_LOCKDOWN_WAY_I_BASE 0x904
+#define L2X0_LOCKDOWN_STRIDE 0x08
#define L2X0_TEST_OPERATION 0xF00
#define L2X0_LINE_DATA 0xF10
#define L2X0_LINE_TAG 0xF30
/*
* Unimplemented (or alternatively implemented) syscalls
*/
-#define __IGNORE_fadvise64_64 1
-#define __IGNORE_migrate_pages 1
+#define __IGNORE_fadvise64_64
+#define __IGNORE_migrate_pages
#endif /* __KERNEL__ */
#endif /* __ASM_ARM_UNISTD_H */
#include <asm/smp_scu.h>
#include <asm/cacheflush.h>
+#include <asm/cputype.h>
#define SCU_CTRL 0x00
#define SCU_CONFIG 0x04
{
u32 scu_ctrl;
+#ifdef CONFIG_ARM_ERRATA_764369
+ /* Cortex-A9 only */
+ if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) {
+ scu_ctrl = __raw_readl(scu_base + 0x30);
+ if (!(scu_ctrl & 1))
+ __raw_writel(scu_ctrl | 0x1, scu_base + 0x30);
+ }
+#endif
+
scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
/* already enabled? */
if (scu_ctrl & 1)
#if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)
#define ARM_EXIT_KEEP(x) x
+#define ARM_EXIT_DISCARD(x)
#else
#define ARM_EXIT_KEEP(x)
+#define ARM_EXIT_DISCARD(x) x
#endif
OUTPUT_ARCH(arm)
SECTIONS
{
/*
+ * XXX: The linker does not define how output sections are
+ * assigned to input sections when there are multiple statements
+ * matching the same input section name. There is no documented
+ * order of matching.
+ *
* unwind exit sections must be discarded before the rest of the
* unwind sections get included.
*/
*(.ARM.extab.exit.text)
ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
+ ARM_EXIT_DISCARD(EXIT_TEXT)
+ ARM_EXIT_DISCARD(EXIT_DATA)
+ EXIT_CALL
#ifndef CONFIG_HOTPLUG
*(.ARM.exidx.devexit.text)
*(.ARM.extab.devexit.text)
#ifndef CONFIG_SMP_ON_UP
*(.alt.smp.init)
#endif
+ *(.discard)
+ *(.discard.*)
}
#ifdef CONFIG_XIP_KERNEL
STABS_DEBUG
.comment 0 : { *(.comment) }
-
- /* Default discards */
- DISCARDS
}
/*
* published by the Free Software Foundation.
*/
-#include <mach/hardware.h>
#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
#include <linux/io.h>
#include <asm/proc-fns.h>
-#include <mach/hardware.h>
static inline void arch_idle(void)
{
*/
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <mach/cns3xxx.h>
#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00))
return &cns3xxx_pcie[root->domain];
}
-static struct cns3xxx_pcie *pdev_to_cnspci(struct pci_dev *dev)
+static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev)
{
return sysdata_to_cnspci(dev->sysdata);
}
},
};
+#ifdef CONFIG_MTD
+static void da850_evm_m25p80_notify_add(struct mtd_info *mtd)
+{
+ char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
+ size_t retlen;
+
+ if (!strcmp(mtd->name, "MAC-Address")) {
+ mtd->read(mtd, 0, ETH_ALEN, &retlen, mac_addr);
+ if (retlen == ETH_ALEN)
+ pr_info("Read MAC addr from SPI Flash: %pM\n",
+ mac_addr);
+ }
+}
+
+static struct mtd_notifier da850evm_spi_notifier = {
+ .add = da850_evm_m25p80_notify_add,
+};
+
+static void da850_evm_setup_mac_addr(void)
+{
+ register_mtd_user(&da850evm_spi_notifier);
+}
+#else
+static void da850_evm_setup_mac_addr(void) { }
+#endif
+
static struct mtd_partition da850_evm_norflash_partition[] = {
{
.name = "bootloaders + env",
if (ret)
pr_warning("da850_evm_init: sata registration failed: %d\n",
ret);
+
+ da850_evm_setup_mac_addr();
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
#define PSC_STATE_DISABLE 2
#define PSC_STATE_ENABLE 3
-#define MDSTAT_STATE_MASK 0x1f
+#define MDSTAT_STATE_MASK 0x3f
#define MDCTL_FORCE BIT(31)
#ifndef __ASSEMBLER__
ENDPROC(davinci_ddr_psc_config)
CACHE_FLUSH:
- .word arm926_flush_kern_cache_all
+#ifdef CONFIG_CPU_V6
+ .word v6_flush_kern_cache_all
+#else
+ .word arm926_flush_kern_cache_all
+#endif
ENTRY(davinci_cpu_suspend_sz)
.word . - davinci_cpu_suspend
void __init dove_spi1_init(void)
{
- orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk());
+ orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk());
}
/*****************************************************************************
.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
}, {
.clk = {
- .name = "sclk_cam",
- .devname = "exynos4-fimc.0",
+ .name = "sclk_cam0",
.enable = exynos4_clksrc_mask_cam_ctrl,
.ctrlbit = (1 << 16),
},
.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
}, {
.clk = {
- .name = "sclk_cam",
- .devname = "exynos4-fimc.1",
+ .name = "sclk_cam1",
.enable = exynos4_clksrc_mask_cam_ctrl,
.ctrlbit = (1 << 20),
},
vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
- __raw_readl(S5P_VPLL_CON1), pll_4650);
+ __raw_readl(S5P_VPLL_CON1), pll_4650c);
clk_fout_apll.ops = &exynos4_fout_apll_ops;
clk_fout_mpll.rate = mpll;
return ((cycle_t)hi << 32) | lo;
}
+static void exynos4_frc_resume(struct clocksource *cs)
+{
+ exynos4_mct_frc_start(0, 0);
+}
+
struct clocksource mct_frc = {
.name = "mct-frc",
.rating = 400,
.read = exynos4_frc_read,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .resume = exynos4_frc_resume,
};
static void __init exynos4_clocksource_init(void)
}
/* Setup the local clock events for a CPU */
-void __cpuinit local_timer_setup(struct clock_event_device *evt)
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
{
exynos4_mct_tick_init(evt);
+
+ return 0;
}
int local_timer_ack(void)
*/
spin_lock(&boot_lock);
spin_unlock(&boot_lock);
+
+ set_cpu_online(cpu, true);
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
if (rows > 8) {
/* Set all the necessary GPX2 pins: KP_ROW[0~7] */
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3));
+ s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3),
+ S3C_GPIO_PULL_UP);
/* Set all the necessary GPX3 pins: KP_ROW[8~] */
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8),
- S3C_GPIO_SFN(3));
+ s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8),
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
} else {
/* Set all the necessary GPX2 pins: KP_ROW[x] */
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows,
- S3C_GPIO_SFN(3));
+ s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3),
+ S3C_GPIO_PULL_UP);
}
/* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/mtd/physmap.h>
+#include <video/vga.h>
#include <mach/hardware.h>
#include <mach/platform.h>
static void __init ap_map_io(void)
{
iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
+ vga_base = PCI_MEMORY_VADDR;
}
#define INTEGRATOR_SC_VALID_INT 0x003fffff
static void integrator_clocksource_init(u32 khz)
{
void __iomem *base = (void __iomem *)TIMER2_VA_BASE;
- u32 ctrl = TIMER_CTRL_ENABLE;
+ u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
if (khz >= 1500) {
khz /= 16;
- ctrl = TIMER_CTRL_DIV16;
+ ctrl |= TIMER_CTRL_DIV16;
}
- writel(ctrl, base + TIMER_CTRL);
writel(0xffff, base + TIMER_LOAD);
+ writel(ctrl, base + TIMER_CTRL);
clocksource_mmio_init(base + TIMER_VALUE, "timer2",
khz * 1000, 200, 16, clocksource_mmio_readl_down);
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <video/vga.h>
#include <mach/hardware.h>
#include <mach/platform.h>
pcibios_min_io = 0x6000;
pcibios_min_mem = 0x00100000;
- vga_base = PCI_MEMORY_VADDR;
/*
* Hook in our fault handler for PCI errors
.name = "gpt12_fck",
.ops = &clkops_null,
.parent = &secure_32k_fck,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
.name = "wdt1_fck",
.ops = &clkops_null,
.parent = &secure_32k_fck,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
} else if (cpu_is_omap446x()) {
cpu_mask = RATE_IN_4460;
cpu_clkflg = CK_446X;
+ } else {
+ return 0;
}
clk_init(&omap2_clk_functions);
- omap2_clk_disable_clkdm_control();
+
+ /*
+ * Must stay commented until all OMAP SoC drivers are
+ * converted to runtime PM, or drivers may start crashing
+ *
+ * omap2_clk_disable_clkdm_control();
+ */
for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
c++)
spin_lock_irqsave(&clkdm->lock, flags);
clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
ret = arch_clkdm->clkdm_wakeup(clkdm);
+ ret |= pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
return ret;
}
spin_lock_irqsave(&clkdm->lock, flags);
clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
arch_clkdm->clkdm_deny_idle(clkdm);
+ pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
}
.pa_end = OMAP243X_HS_BASE + SZ_4K - 1,
.flags = ADDR_TYPE_RT
},
+ { }
};
/* l4_core ->usbhsotg interface */
} else {
hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]);
clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
- pwrdm_wait_transition(pwrdm);
sleep_switch = FORCEWAKEUP_SWITCH;
}
}
return ret;
}
- pwrdm_wait_transition(pwrdm);
pwrdm_state_switch(pwrdm);
err:
return ret;
/**
* pwrdm_init - set up the powerdomain layer
- * @pwrdm_list: array of struct powerdomain pointers to register
+ * @pwrdms: array of struct powerdomain pointers to register
* @custom_funcs: func pointers for arch specific implementations
*
- * Loop through the array of powerdomains @pwrdm_list, registering all
- * that are available on the current CPU. If pwrdm_list is supplied
- * and not null, all of the referenced powerdomains will be
- * registered. No return value. XXX pwrdm_list is not really a
- * "list"; it is an array. Rename appropriately.
+ * Loop through the array of powerdomains @pwrdms, registering all
+ * that are available on the current CPU. Also, program all
+ * powerdomain target state as ON; this is to prevent domains from
+ * hitting low power states (if bootloader has target states set to
+ * something other than ON) and potentially even losing context while
+ * PM is not fully initialized. The PM late init code can then program
+ * the desired target state for all the power domains. No return
+ * value.
*/
-void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs)
+void pwrdm_init(struct powerdomain **pwrdms, struct pwrdm_ops *custom_funcs)
{
struct powerdomain **p = NULL;
+ struct powerdomain *temp_p;
if (!custom_funcs)
WARN(1, "powerdomain: No custom pwrdm functions registered\n");
else
arch_pwrdm = custom_funcs;
- if (pwrdm_list) {
- for (p = pwrdm_list; *p; p++)
+ if (pwrdms) {
+ for (p = pwrdms; *p; p++)
_pwrdm_register(*p);
}
+
+ list_for_each_entry(temp_p, &pwrdm_list, node)
+ pwrdm_set_next_pwrst(temp_p, PWRDM_POWER_ON);
}
/**
static struct of_device_id clkc_ids[] = {
{ .compatible = "sirf,prima2-clkc" },
+ {},
};
void __init sirfsoc_of_clk_init(void)
static struct of_device_id intc_ids[] = {
{ .compatible = "sirf,prima2-intc" },
+ {},
};
void __init sirfsoc_of_irq_init(void)
static struct of_device_id rstc_ids[] = {
{ .compatible = "sirf,prima2-rstc" },
+ {},
};
static int __init sirfsoc_of_rstc_init(void)
static struct of_device_id timer_ids[] = {
{ .compatible = "sirf,prima2-tick" },
+ {},
};
static void __init sirfsoc_of_timer_map(void)
unsigned long clkcon0;
clkcon0 = __raw_readl(S3C2443_CLKDIV0);
- clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+ clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK;
clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
__raw_writel(clkcon0, S3C2443_CLKDIV0);
}
.cols = 8,
};
-static int smdk6410_backlight_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(S3C64XX_GPF(15), "Backlight");
- if (ret) {
- printk(KERN_ERR "failed to request GPF for PWM-OUT1\n");
- return ret;
- }
-
- /* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */
- s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
-
- return 0;
-}
-
-static void smdk6410_backlight_exit(struct device *dev)
-{
- s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT);
- gpio_free(S3C64XX_GPF(15));
-}
-
-static struct platform_pwm_backlight_data smdk6410_backlight_data = {
- .pwm_id = 1,
- .max_brightness = 255,
- .dft_brightness = 255,
- .pwm_period_ns = 78770,
- .init = smdk6410_backlight_init,
- .exit = smdk6410_backlight_exit,
-};
-
-static struct platform_device smdk6410_backlight_device = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &s3c_device_timer[1].dev,
- .platform_data = &smdk6410_backlight_data,
- },
-};
-
static struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
.reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
}, {
.clk = {
- .name = "sclk_cam",
- .devname = "s5pv210-fimc.0",
+ .name = "sclk_cam0",
.enable = s5pv210_clk_mask0_ctrl,
.ctrlbit = (1 << 3),
},
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
}, {
.clk = {
- .name = "sclk_cam",
- .devname = "s5pv210-fimc.1",
+ .name = "sclk_cam1",
.enable = s5pv210_clk_mask0_ctrl,
.ctrlbit = (1 << 4),
},
cmp \tmp, # 0x5600 @ Is it ldrsb?
orreq \tmp, \tmp, #1 << 11 @ Set L-bit if yes
tst \tmp, #1 << 11 @ L = 0 -> write
- orreq \psr, \psr, #1 << 11 @ yes.
+ orreq \fsr, \fsr, #1 << 11 @ yes.
b do_DataAbort
not_thumb:
.endm
spin_unlock_irqrestore(&l2x0_lock, flags);
}
+static void __init l2x0_unlock(__u32 cache_id)
+{
+ int lockregs;
+ int i;
+
+ if (cache_id == L2X0_CACHE_ID_PART_L310)
+ lockregs = 8;
+ else
+ /* L210 and unknown types */
+ lockregs = 1;
+
+ for (i = 0; i < lockregs; i++) {
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ }
+}
+
void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
{
__u32 aux;
* accessing the below registers will fault.
*/
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
+ /* Make sure that I&D is not locked down when starting */
+ l2x0_unlock(cache_id);
/* l2x0 controller is disabled */
writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL);
dcache_line_size r2, r3
sub r3, r2, #1
bic r12, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+ ALT_SMP(W(dsb))
+ ALT_UP(W(nop))
+#endif
1:
USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification
add r12, r12, r2
add r1, r0, r1
sub r3, r2, #1
bic r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+ ALT_SMP(W(dsb))
+ ALT_UP(W(nop))
+#endif
1:
mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line
add r0, r0, r2
sub r3, r2, #1
tst r0, r3
bic r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+ ALT_SMP(W(dsb))
+ ALT_UP(W(nop))
+#endif
mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line
tst r1, r3
dcache_line_size r2, r3
sub r3, r2, #1
bic r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+ ALT_SMP(W(dsb))
+ ALT_UP(W(nop))
+#endif
1:
mcr p15, 0, r0, c7, c10, 1 @ clean D / U line
add r0, r0, r2
dcache_line_size r2, r3
sub r3, r2, #1
bic r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+ ALT_SMP(W(dsb))
+ ALT_UP(W(nop))
+#endif
1:
mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line
add r0, r0, r2
if (addr)
*handle = pfn_to_dma(dev, page_to_pfn(page));
+ else
+ __dma_free_buffer(page, size);
return addr;
}
#ifdef CONFIG_HAVE_ARCH_PFN_VALID
int pfn_valid(unsigned long pfn)
{
- return memblock_is_memory(pfn << PAGE_SHIFT);
+ return memblock_is_memory(__pfn_to_phys(pfn));
}
EXPORT_SYMBOL(pfn_valid);
#endif
return pm_generic_resume_noirq(dev);
}
+#else
+#define _od_suspend_noirq NULL
+#define _od_resume_noirq NULL
#endif
static struct dev_pm_domain omap_device_pm_domain = {
{
static int used_gpioint_groups = 0;
int group = chip->group;
- struct s5p_gpioint_bank *bank = NULL;
+ struct s5p_gpioint_bank *b, *bank = NULL;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
return -ENOMEM;
- list_for_each_entry(bank, &banks, list) {
- if (group >= bank->start &&
- group < bank->start + bank->nr_groups)
+ list_for_each_entry(b, &banks, list) {
+ if (group >= b->start && group < b->start + b->nr_groups) {
+ bank = b;
break;
+ }
}
if (!bank)
return -EINVAL;
*/
DEFINE_SPINLOCK(clocks_lock);
+/* Global watchdog clock used by arch_wtd_reset() callback */
+struct clk *s3c2410_wdtclk;
+static int __init s3c_wdt_reset_init(void)
+{
+ s3c2410_wdtclk = clk_get(NULL, "watchdog");
+ if (IS_ERR(s3c2410_wdtclk))
+ printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+ return 0;
+}
+arch_initcall(s3c_wdt_reset_init);
+
/* enable and disable calls for use with the clk struct */
static int clk_null_enable(struct clk *clk, int enable)
* published by the Free Software Foundation.
*/
+#ifndef __ASM_PLAT_CLOCK_H
+#define __ASM_PLAT_CLOCK_H __FILE__
+
#include <linux/spinlock.h>
#include <linux/clkdev.h>
extern void s3c_pwmclk_init(void);
+/* Global watchdog clock used by arch_wtd_reset() callback */
+
+extern struct clk *s3c2410_wdtclk;
+
+#endif /* __ASM_PLAT_CLOCK_H */
* published by the Free Software Foundation.
*/
+#include <plat/clock.h>
#include <plat/regs-watchdog.h>
#include <mach/map.h>
static inline void arch_wdt_reset(void)
{
- struct clk *wdtclk;
-
printk("arch_reset: attempting watchdog reset\n");
__raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
- wdtclk = clk_get(NULL, "watchdog");
- if (!IS_ERR(wdtclk)) {
- clk_enable(wdtclk);
- } else
- printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+ if (s3c2410_wdtclk)
+ clk_enable(s3c2410_wdtclk);
/* put initial values into count and data */
__raw_writel(0x80, S3C2410_WTCNT);
#define DMA_ERROR_CODE (~(dma_addr_t)0x0)
-int dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
void or1k_unmap_page(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction dir,
struct dma_attrs *attrs);
+int or1k_map_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs);
+void or1k_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs);
void or1k_sync_single_for_cpu(struct device *dev,
dma_addr_t dma_handle, size_t size,
enum dma_data_direction dir);
debug_dma_unmap_page(dev, addr, size, dir, true);
}
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir)
+{
+ int i, ents;
+ struct scatterlist *s;
+
+ for_each_sg(sg, s, nents, i)
+ kmemcheck_mark_initialized(sg_virt(s), s->length);
+ BUG_ON(!valid_dma_direction(dir));
+ ents = or1k_map_sg(dev, sg, nents, dir, NULL);
+ debug_dma_map_sg(dev, sg, nents, ents, dir);
+
+ return ents;
+}
+
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir)
+{
+ BUG_ON(!valid_dma_direction(dir));
+ debug_dma_unmap_sg(dev, sg, nents, dir);
+ or1k_unmap_sg(dev, sg, nents, dir, NULL);
+}
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+ size_t offset, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_addr_t addr;
+
+ kmemcheck_mark_initialized(page_address(page) + offset, size);
+ BUG_ON(!valid_dma_direction(dir));
+ addr = or1k_map_page(dev, page, offset, size, dir, NULL);
+ debug_dma_map_page(dev, page, offset, size, dir, addr, false);
+
+ return addr;
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t addr,
+ size_t size, enum dma_data_direction dir)
+{
+ BUG_ON(!valid_dma_direction(dir));
+ or1k_unmap_page(dev, addr, size, dir, NULL);
+ debug_dma_unmap_page(dev, addr, size, dir, true);
+}
+
static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr,
size_t size,
enum dma_data_direction dir)
static inline int dma_supported(struct device *dev, u64 dma_mask)
{
/* Support 32 bit DMA mask exclusively */
- return dma_mask == 0xffffffffULL;
+ return dma_mask == DMA_BIT_MASK(32);
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+ return 0;
}
static inline int dma_set_mask(struct device *dev, u64 dma_mask)
/* This struct is saved by setup_frame in signal.c, to keep the current
context while a signal handler is executed. It's restored by sys_sigreturn.
-
- To keep things simple, we use pt_regs here even though normally you just
- specify the list of regs to save. Then we can use copy_from_user on the
- entire regs instead of a bunch of get_user's as well...
*/
struct sigcontext {
- struct pt_regs regs; /* needs to be first */
+ struct user_regs_struct regs; /* needs to be first */
unsigned long oldmask;
- unsigned long usp; /* usp before stacking this gunk on it */
};
#endif /* __ASM_OPENRISC_SIGCONTEXT_H */
/* Nothing special to do here... */
}
+int or1k_map_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ struct scatterlist *s;
+ int i;
+
+ for_each_sg(sg, s, nents, i) {
+ s->dma_address = or1k_map_page(dev, sg_page(s), s->offset,
+ s->length, dir, NULL);
+ }
+
+ return nents;
+}
+
+void or1k_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ struct scatterlist *s;
+ int i;
+
+ for_each_sg(sg, s, nents, i) {
+ or1k_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir, NULL);
+ }
+}
+
void or1k_sync_single_for_cpu(struct device *dev,
dma_addr_t dma_handle, size_t size,
enum dma_data_direction dir)
return 0;
}
-
fs_initcall(dma_init);
static int restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
{
unsigned int err = 0;
- unsigned long old_usp;
/* Alwys make any pending restarted system call return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
- /* restore the regs from &sc->regs (same as sc, since regs is first)
+ /*
+ * Restore the regs from &sc->regs.
* (sc is already checked for VERIFY_READ since the sigframe was
* checked in sys_sigreturn previously)
*/
-
- if (__copy_from_user(regs, sc, sizeof(struct pt_regs)))
+ if (__copy_from_user(regs, sc->regs.gpr, 32 * sizeof(unsigned long)))
+ goto badframe;
+ if (__copy_from_user(®s->pc, &sc->regs.pc, sizeof(unsigned long)))
+ goto badframe;
+ if (__copy_from_user(®s->sr, &sc->regs.sr, sizeof(unsigned long)))
goto badframe;
/* make sure the SM-bit is cleared so user-mode cannot fool us */
regs->sr &= ~SPR_SR_SM;
- /* restore the old USP as it was before we stacked the sc etc.
- * (we cannot just pop the sigcontext since we aligned the sp and
- * stuff after pushing it)
- */
-
- err |= __get_user(old_usp, &sc->usp);
-
- regs->sp = old_usp;
-
/* TODO: the other ports use regs->orig_XX to disable syscall checks
* after this completes, but we don't use that mechanism. maybe we can
* use it now ?
unsigned long mask)
{
int err = 0;
- unsigned long usp = regs->sp;
- /* copy the regs. they are first in sc so we can use sc directly */
+ /* copy the regs */
- err |= __copy_to_user(sc, regs, sizeof(struct pt_regs));
+ err |= __copy_to_user(sc->regs.gpr, regs, 32 * sizeof(unsigned long));
+ err |= __copy_to_user(&sc->regs.pc, ®s->pc, sizeof(unsigned long));
+ err |= __copy_to_user(&sc->regs.sr, ®s->sr, sizeof(unsigned long));
/* then some other stuff */
err |= __put_user(mask, &sc->oldmask);
- err |= __put_user(usp, &sc->usp);
-
return err;
}
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x02000000>;
- bank-width = <1>;
+ bank-width = <2>;
device-width = <1>;
partition@0 {
label = "ramdisk";
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_VIRQ_DEBUG=y
CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_PPC is not set
# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_PPC is not set
# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
* struct gmap_struct - guest address space
* @mm: pointer to the parent mm_struct
* @table: pointer to the page directory
+ * @asce: address space control element for gmap page table
* @crst_list: list of all crst tables used in the guest address space
*/
struct gmap {
struct list_head list;
struct mm_struct *mm;
unsigned long *table;
+ unsigned long asce;
struct list_head crst_list;
};
#include <linux/sched.h>
#include <asm/vdso.h>
#include <asm/sigp.h>
+#include <asm/pgtable.h>
/*
* Make sure that the compiler is new enough. We want a compiler that
DEFINE(__LC_KERNEL_STACK, offsetof(struct _lowcore, kernel_stack));
DEFINE(__LC_ASYNC_STACK, offsetof(struct _lowcore, async_stack));
DEFINE(__LC_PANIC_STACK, offsetof(struct _lowcore, panic_stack));
+ DEFINE(__LC_USER_ASCE, offsetof(struct _lowcore, user_asce));
DEFINE(__LC_INT_CLOCK, offsetof(struct _lowcore, int_clock));
DEFINE(__LC_MCCK_CLOCK, offsetof(struct _lowcore, mcck_clock));
DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags));
DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data));
DEFINE(__LC_GMAP, offsetof(struct _lowcore, gmap));
DEFINE(__LC_CMF_HPP, offsetof(struct _lowcore, cmf_hpp));
+ DEFINE(__GMAP_ASCE, offsetof(struct gmap, asce));
#endif /* CONFIG_32BIT */
return 0;
}
lg %r14,__LC_THREAD_INFO # pointer thread_info struct
tm __TI_flags+7(%r14),_TIF_EXIT_SIE
jnz sie_exit
+ lg %r14,__LC_GMAP # get gmap pointer
+ ltgr %r14,%r14
+ jz sie_gmap
+ lctlg %c1,%c1,__GMAP_ASCE(%r14) # load primary asce
+sie_gmap:
lg %r14,__SF_EMPTY(%r15) # get control block pointer
SPP __SF_EMPTY(%r15) # set guest id
sie 0(%r14)
SPP __LC_CMF_HPP # set host id
lg %r14,__LC_THREAD_INFO # pointer thread_info struct
sie_exit:
+ lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
ni __TI_flags+6(%r14),255-(_TIF_SIE>>8)
lg %r14,__SF_EMPTY+8(%r15) # load guest register save area
stmg %r0,%r13,0(%r14) # save guest gprs 0-13
switch (ext) {
case KVM_CAP_S390_PSW:
+ case KVM_CAP_S390_GMAP:
r = 1;
break;
default:
vcpu->arch.guest_fpregs.fpc &= FPC_VALID_MASK;
restore_fp_regs(&vcpu->arch.guest_fpregs);
restore_access_regs(vcpu->arch.guest_acrs);
+ gmap_enable(vcpu->arch.gmap);
}
void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
{
+ gmap_disable(vcpu->arch.gmap);
save_fp_regs(&vcpu->arch.guest_fpregs);
save_access_regs(vcpu->arch.guest_acrs);
restore_fp_regs(&vcpu->arch.host_fpregs);
local_irq_disable();
kvm_guest_enter();
local_irq_enable();
- gmap_enable(vcpu->arch.gmap);
VCPU_EVENT(vcpu, 6, "entering sie flags %x",
atomic_read(&vcpu->arch.sie_block->cpuflags));
if (sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs)) {
}
VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
vcpu->arch.sie_block->icptcode);
- gmap_disable(vcpu->arch.gmap);
local_irq_disable();
kvm_guest_exit();
local_irq_enable();
table = (unsigned long *) page_to_phys(page);
crst_table_init(table, _REGION1_ENTRY_EMPTY);
gmap->table = table;
+ gmap->asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH |
+ _ASCE_USER_BITS | __pa(table);
list_add(&gmap->list, &mm->context.gmap_list);
return gmap;
*/
void gmap_enable(struct gmap *gmap)
{
- /* Load primary space page table origin. */
- S390_lowcore.user_asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH |
- _ASCE_USER_BITS | __pa(gmap->table);
- asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) );
S390_lowcore.gmap = (unsigned long) gmap;
}
EXPORT_SYMBOL_GPL(gmap_enable);
*/
void gmap_disable(struct gmap *gmap)
{
- /* Load primary space page table origin. */
- S390_lowcore.user_asce =
- gmap->mm->context.asce_bits | __pa(gmap->mm->pgd);
- asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) );
S390_lowcore.gmap = 0UL;
}
EXPORT_SYMBOL_GPL(gmap_disable);
bool
default n
+config CMPXCHG_DOUBLE
+ bool
+ default n
+
source "arch/x86/Kconfig.cpu"
endmenu
KBUILD_CFLAGS += $(CFLAGS) $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \
$(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap \
-Din6addr_loopback=kernel_in6addr_loopback \
- -Din6addr_any=kernel_in6addr_any
+ -Din6addr_any=kernel_in6addr_any -Dstrrchr=kernel_strrchr
KBUILD_AFLAGS += $(ARCH_INCLUDE)
* is done under a spinlock. Checking whether the device is in use is
* line->tty->count > 1, also under the spinlock.
*
- * tty->count serves to decide whether the device should be enabled or
- * disabled on the host. If it's equal to 1, then we are doing the
+ * line->count serves to decide whether the device should be enabled or
+ * disabled on the host. If it's equal to 0, then we are doing the
* first open or last close. Otherwise, open and close just return.
*/
goto out_unlock;
err = 0;
- if (tty->count > 1)
+ if (line->count++)
goto out_unlock;
- spin_unlock(&line->count_lock);
-
+ BUG_ON(tty->driver_data);
tty->driver_data = line;
line->tty = tty;
+ spin_unlock(&line->count_lock);
err = enable_chan(line);
- if (err)
+ if (err) /* line_close() will be called by our caller */
return err;
INIT_DELAYED_WORK(&line->task, line_timer_cb);
chan_window_size(&line->chan_list, &tty->winsize.ws_row,
&tty->winsize.ws_col);
- return err;
+ return 0;
out_unlock:
spin_unlock(&line->count_lock);
flush_buffer(line);
spin_lock(&line->count_lock);
- if (!line->valid)
- goto out_unlock;
+ BUG_ON(!line->valid);
- if (tty->count > 1)
+ if (--line->count)
goto out_unlock;
- spin_unlock(&line->count_lock);
-
line->tty = NULL;
tty->driver_data = NULL;
+ spin_unlock(&line->count_lock);
+
if (line->sigio) {
unregister_winch(tty);
line->sigio = 0;
spin_lock(&line->count_lock);
- if (line->tty != NULL) {
+ if (line->count) {
*error_out = "Device is already open";
goto out;
}
int pid;
struct tty_struct *tty;
unsigned long stack;
+ struct work_struct work;
};
-static void free_winch(struct winch *winch, int free_irq_ok)
+static void __free_winch(struct work_struct *work)
{
- if (free_irq_ok)
- free_irq(WINCH_IRQ, winch);
-
- list_del(&winch->list);
+ struct winch *winch = container_of(work, struct winch, work);
+ free_irq(WINCH_IRQ, winch);
if (winch->pid != -1)
os_kill_process(winch->pid, 1);
- if (winch->fd != -1)
- os_close_file(winch->fd);
if (winch->stack != 0)
free_stack(winch->stack, 0);
kfree(winch);
}
+static void free_winch(struct winch *winch)
+{
+ int fd = winch->fd;
+ winch->fd = -1;
+ if (fd != -1)
+ os_close_file(fd);
+ list_del(&winch->list);
+ __free_winch(&winch->work);
+}
+
static irqreturn_t winch_interrupt(int irq, void *data)
{
struct winch *winch = data;
struct tty_struct *tty;
struct line *line;
+ int fd = winch->fd;
int err;
char c;
- if (winch->fd != -1) {
- err = generic_read(winch->fd, &c, NULL);
+ if (fd != -1) {
+ err = generic_read(fd, &c, NULL);
if (err < 0) {
if (err != -EAGAIN) {
+ winch->fd = -1;
+ list_del(&winch->list);
+ os_close_file(fd);
printk(KERN_ERR "winch_interrupt : "
"read failed, errno = %d\n", -err);
printk(KERN_ERR "fd %d is losing SIGWINCH "
"support\n", winch->tty_fd);
- free_winch(winch, 0);
+ INIT_WORK(&winch->work, __free_winch);
+ schedule_work(&winch->work);
return IRQ_HANDLED;
}
goto out;
list_for_each_safe(ele, next, &winch_handlers) {
winch = list_entry(ele, struct winch, list);
if (winch->tty == tty) {
- free_winch(winch, 1);
+ free_winch(winch);
break;
}
}
list_for_each_safe(ele, next, &winch_handlers) {
winch = list_entry(ele, struct winch, list);
- free_winch(winch, 1);
+ free_winch(winch);
}
spin_unlock(&winch_handler_lock);
err = -errno;
printk(UM_KERN_ERR "xterm_open : unlink failed, errno = %d\n",
errno);
+ close(fd);
return err;
}
close(fd);
unsigned long addr, unsigned long data);
extern unsigned long getreg(struct task_struct *child, int regno);
extern int putreg(struct task_struct *child, int regno, unsigned long value);
-extern int get_fpregs(struct user_i387_struct __user *buf,
- struct task_struct *child);
-extern int set_fpregs(struct user_i387_struct __user *buf,
- struct task_struct *child);
extern int arch_copy_tls(struct task_struct *new);
extern void clear_flushed_tls(struct task_struct *task);
struct line {
struct tty_struct *tty;
spinlock_t count_lock;
+ unsigned long count;
int valid;
char *init_str;
extern int save_registers(int pid, struct uml_pt_regs *regs);
extern int restore_registers(int pid, struct uml_pt_regs *regs);
extern int init_registers(int pid);
-extern void get_safe_registers(unsigned long *regs);
+extern void get_safe_registers(unsigned long *regs, unsigned long *fp_regs);
extern unsigned long get_thread_reg(int reg, jmp_buf *buf);
extern int get_fp_registers(int pid, unsigned long *regs);
extern int put_fp_registers(int pid, unsigned long *regs);
arch_copy_thread(¤t->thread.arch, &p->thread.arch);
}
else {
- get_safe_registers(p->thread.regs.regs.gp);
+ get_safe_registers(p->thread.regs.regs.gp, p->thread.regs.regs.fp);
p->thread.request.u.thread = current->thread.request.u.thread;
handler = new_thread_handler;
}
void __user *vp = p;
switch (request) {
- /* read word at location addr. */
- case PTRACE_PEEKTEXT:
- case PTRACE_PEEKDATA:
- ret = generic_ptrace_peekdata(child, addr, data);
- break;
-
/* read the word at location addr in the USER area. */
case PTRACE_PEEKUSR:
ret = peek_user(child, addr, data);
break;
- /* write the word at location addr. */
- case PTRACE_POKETEXT:
- case PTRACE_POKEDATA:
- ret = generic_ptrace_pokedata(child, addr, data);
- break;
-
/* write the word at location addr in the USER area */
case PTRACE_POKEUSR:
ret = poke_user(child, addr, data);
ret = 0;
break;
}
-#endif
-#ifdef PTRACE_GETFPREGS
- case PTRACE_GETFPREGS: /* Get the child FPU state. */
- ret = get_fpregs(vp, child);
- break;
-#endif
-#ifdef PTRACE_SETFPREGS
- case PTRACE_SETFPREGS: /* Set the child FPU state. */
- ret = set_fpregs(vp, child);
- break;
#endif
case PTRACE_GET_THREAD_AREA:
ret = ptrace_get_thread_area(child, addr, vp);
ret = -EIO;
break;
}
-#endif
-#ifdef PTRACE_ARCH_PRCTL
- case PTRACE_ARCH_PRCTL:
- /* XXX Calls ptrace on the host - needs some SMP thinking */
- ret = arch_prctl(child, data, (void __user *) addr);
- break;
#endif
default:
ret = ptrace_request(child, request, addr, data);
#include <string.h>
#include <sys/ptrace.h>
#include "sysdep/ptrace.h"
+#include "sysdep/ptrace_user.h"
+#include "registers.h"
int save_registers(int pid, struct uml_pt_regs *regs)
{
/* This is set once at boot time and not changed thereafter */
static unsigned long exec_regs[MAX_REG_NR];
+static unsigned long exec_fp_regs[FP_SIZE];
int init_registers(int pid)
{
return -errno;
arch_init_registers(pid);
+ get_fp_registers(pid, exec_fp_regs);
return 0;
}
-void get_safe_registers(unsigned long *regs)
+void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)
{
memcpy(regs, exec_regs, sizeof(exec_regs));
+
+ if (fp_regs)
+ memcpy(fp_regs, exec_fp_regs, sizeof(exec_fp_regs));
}
static int __init init_syscall_regs(void)
{
- get_safe_registers(syscall_regs);
+ get_safe_registers(syscall_regs, NULL);
syscall_regs[REGS_IP_INDEX] = STUB_CODE +
((unsigned long) &batch_syscall_stub -
(unsigned long) &__syscall_stub_start);
if (ptrace(PTRACE_SETREGS, pid, 0, regs->gp))
fatal_sigsegv();
+ if (put_fp_registers(pid, regs->fp))
+ fatal_sigsegv();
+
/* Now we set local_using_sysemu to be used for one loop */
local_using_sysemu = get_using_sysemu();
fatal_sigsegv();
}
+ if (get_fp_registers(pid, regs->fp)) {
+ printk(UM_KERN_ERR "userspace - get_fp_registers failed, "
+ "errno = %d\n", errno);
+ fatal_sigsegv();
+ }
+
UPT_SYSCALL_NR(regs) = -1; /* Assume: It's not a syscall */
if (WIFSTOPPED(status)) {
}
static unsigned long thread_regs[MAX_REG_NR];
+static unsigned long thread_fp_regs[FP_SIZE];
static int __init init_thread_regs(void)
{
- get_safe_registers(thread_regs);
+ get_safe_registers(thread_regs, thread_fp_regs);
/* Set parent's instruction pointer to start of clone-stub */
thread_regs[REGS_IP_INDEX] = STUB_CODE +
(unsigned long) stub_clone_handler -
return err;
}
+ err = put_fp_registers(pid, thread_fp_regs);
+ if (err < 0) {
+ printk(UM_KERN_ERR "copy_context_skas0 : put_fp_registers "
+ "failed, pid = %d, err = %d\n", pid, err);
+ return err;
+ }
+
/* set a well known return code for detection of child write failure */
child_data->err = 12345678;
*/
struct user_desc;
-extern int get_fpxregs(struct user_fxsr_struct __user *buf,
- struct task_struct *child);
-extern int set_fpxregs(struct user_fxsr_struct __user *buf,
- struct task_struct *tsk);
-
extern int ptrace_get_thread_area(struct task_struct *child, int idx,
struct user_desc __user *user_desc);
return put_user(tmp, (unsigned long __user *) data);
}
-int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
struct user_i387_struct fpregs;
return n;
}
-int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int n, cpu = ((struct thread_info *) child->stack)->cpu;
struct user_i387_struct fpregs;
(unsigned long *) &fpregs);
}
-int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
+static int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
{
int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
struct user_fxsr_struct fpregs;
return n;
}
-int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
+static int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
{
int n, cpu = ((struct thread_info *) child->stack)->cpu;
struct user_fxsr_struct fpregs;
long subarch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data)
{
- return -EIO;
+ int ret = -EIO;
+ void __user *datap = (void __user *) data;
+ switch (request) {
+ case PTRACE_GETFPREGS: /* Get the child FPU state. */
+ ret = get_fpregs(datap, child);
+ break;
+ case PTRACE_SETFPREGS: /* Set the child FPU state. */
+ ret = set_fpregs(datap, child);
+ break;
+ case PTRACE_GETFPXREGS: /* Get the child FPU state. */
+ ret = get_fpxregs(datap, child);
+ break;
+ case PTRACE_SETFPXREGS: /* Set the child FPU state. */
+ ret = set_fpxregs(datap, child);
+ break;
+ default:
+ ret = -EIO;
+ }
+ return ret;
}
struct uml_pt_regs {
unsigned long gp[MAX_REG_NR];
+ unsigned long fp[HOST_FPX_SIZE];
struct faultinfo faultinfo;
long syscall;
int is_user;
return instr == 0x050f;
}
-int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
long fpregs[HOST_FP_SIZE];
return n;
}
-int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int n, cpu = ((struct thread_info *) child->stack)->cpu;
long fpregs[HOST_FP_SIZE];
void __user *datap = (void __user *) data;
switch (request) {
- case PTRACE_GETFPXREGS: /* Get the child FPU state. */
+ case PTRACE_GETFPREGS: /* Get the child FPU state. */
ret = get_fpregs(datap, child);
break;
- case PTRACE_SETFPXREGS: /* Set the child FPU state. */
+ case PTRACE_SETFPREGS: /* Set the child FPU state. */
ret = set_fpregs(datap, child);
break;
+ case PTRACE_ARCH_PRCTL:
+ /* XXX Calls ptrace on the host - needs some SMP thinking */
+ ret = arch_prctl(child, data, (void __user *) addr);
+ break;
}
return ret;
struct uml_pt_regs {
unsigned long gp[MAX_REG_NR];
+ unsigned long fp[HOST_FP_SIZE];
struct faultinfo faultinfo;
long syscall;
int is_user;
#endif
.macro altinstruction_entry orig alt feature orig_len alt_len
- .align 8
.long \orig - .
.long \alt - .
.word \feature
u16 cpuid; /* cpuid bit set for replacement */
u8 instrlen; /* length of original instruction */
u8 replacementlen; /* length of new instruction, <= instrlen */
-#ifdef CONFIG_X86_64
- u32 pad2;
-#endif
};
extern void alternative_instructions(void);
\
"661:\n\t" oldinstr "\n662:\n" \
".section .altinstructions,\"a\"\n" \
- _ASM_ALIGN "\n" \
" .long 661b - .\n" /* label */ \
" .long 663f - .\n" /* new instruction */ \
" .word " __stringify(feature) "\n" /* feature bit */ \
asm goto("1: jmp %l[t_no]\n"
"2:\n"
".section .altinstructions,\"a\"\n"
- _ASM_ALIGN "\n"
" .long 1b - .\n"
" .long 0\n" /* no replacement */
" .word %P0\n" /* feature bit */
asm volatile("1: movb $0,%0\n"
"2:\n"
".section .altinstructions,\"a\"\n"
- _ASM_ALIGN "\n"
" .long 1b - .\n"
" .long 3f - .\n"
" .word %P1\n" /* feature bit */
: "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
#elif defined(__x86_64__)
__asm__ (
- "mul %[mul_frac] ; shrd $32, %[hi], %[lo]"
+ "mulq %[mul_frac] ; shrd $32, %[hi], %[lo]"
: [lo]"=a"(product),
[hi]"=d"(tmp)
: "0"(delta),
perf_callchain_store(entry, regs->ip);
+ if (!current->mm)
+ return;
+
if (perf_callchain_user32(regs, entry))
return;
break;
case Src2CL:
ctxt->src2.bytes = 1;
- ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0x8;
+ ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0xff;
break;
case Src2ImmByte:
rc = decode_imm(ctxt, &ctxt->src2, 1, true);
/* xchg acts as a barrier before the setting of the high bits */
orig.spte_low = xchg(&ssptep->spte_low, sspte.spte_low);
- orig.spte_high = ssptep->spte_high = sspte.spte_high;
+ orig.spte_high = ssptep->spte_high;
+ ssptep->spte_high = sspte.spte_high;
count_spte_clear(sptep, spte);
return orig.spte;
*/
if (bus) {
struct pci_bus *child;
- list_for_each_entry(child, &bus->children, node)
- pcie_bus_configure_settings(child, child->self->pcie_mpss);
+ list_for_each_entry(child, &bus->children, node) {
+ struct pci_dev *self = child->self;
+ if (!self)
+ continue;
+
+ pcie_bus_configure_settings(child, self->pcie_mpss);
+ }
}
if (!bus)
machine_to_phys_nr = MACH2PHYS_NR_ENTRIES;
}
#ifdef CONFIG_X86_32
- if ((machine_to_phys_mapping + machine_to_phys_nr)
- < machine_to_phys_mapping)
- machine_to_phys_nr = (unsigned long *)NULL
- - machine_to_phys_mapping;
+ WARN_ON((machine_to_phys_mapping + (machine_to_phys_nr - 1))
+ < machine_to_phys_mapping);
#endif
}
PFN_UP(start_pci), PFN_DOWN(last));
return identity;
}
+
+static unsigned long __init xen_get_max_pages(void)
+{
+ unsigned long max_pages = MAX_DOMAIN_PAGES;
+ domid_t domid = DOMID_SELF;
+ int ret;
+
+ ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid);
+ if (ret > 0)
+ max_pages = ret;
+ return min(max_pages, MAX_DOMAIN_PAGES);
+}
+
/**
* machine_specific_memory_setup - Hook for machine specific memory setup.
**/
sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+ extra_limit = xen_get_max_pages();
+ if (max_pfn + extra_pages > extra_limit) {
+ if (extra_limit > max_pfn)
+ extra_pages = extra_limit - max_pfn;
+ else
+ extra_pages = 0;
+ }
+
extra_pages += xen_return_unused_memory(xen_start_info->nr_pages, &e820);
/*
#include <xen/page.h>
#include <xen/events.h>
+#include <xen/hvc-console.h>
#include "xen-ops.h"
#include "mmu.h"
unsigned cpu;
unsigned int i;
+ if (skip_ioapic_setup) {
+ char *m = (max_cpus == 0) ?
+ "The nosmp parameter is incompatible with Xen; " \
+ "use Xen dom0_max_vcpus=1 parameter" :
+ "The noapic parameter is incompatible with Xen";
+
+ xen_raw_printk(m);
+ panic(m);
+ }
xen_init_lock_cpu(0);
smp_store_cpu_info(0);
WARN_ON(xen_smp_intr_init(0));
xen_init_lock_cpu(0);
- xen_init_spinlocks();
}
static int __cpuinit xen_hvm_cpu_up(unsigned int cpu)
struct pvclock_vcpu_time_info *src;
cycle_t ret;
- src = &get_cpu_var(xen_vcpu)->time;
+ preempt_disable_notrace();
+ src = &__get_cpu_var(xen_vcpu)->time;
ret = pvclock_clocksource_read(src);
- put_cpu_var(xen_vcpu);
+ preempt_enable_notrace();
return ret;
}
/*
* If there's something pending, mask events again so we can
- * jump back into xen_hypervisor_callback
+ * jump back into xen_hypervisor_callback. Otherwise do not
+ * touch XEN_vcpu_info_mask.
*/
- sete XEN_vcpu_info_mask(%eax)
+ jne 1f
+ movb $1, XEN_vcpu_info_mask(%eax)
- popl %eax
+1: popl %eax
/*
* From this point on the registers are restored and the stack
{
char *s[4], *p, *major_s = NULL, *minor_s = NULL;
int ret;
- unsigned long major, minor, temp;
+ unsigned long major, minor;
int i = 0;
dev_t dev;
- u64 bps, iops;
+ u64 temp;
memset(s, 0, sizeof(s));
dev = MKDEV(major, minor);
- ret = blkio_check_dev_num(dev);
+ ret = strict_strtoull(s[1], 10, &temp);
if (ret)
- return ret;
+ return -EINVAL;
- newpn->dev = dev;
+ /* For rule removal, do not check for device presence. */
+ if (temp) {
+ ret = blkio_check_dev_num(dev);
+ if (ret)
+ return ret;
+ }
- if (s[1] == NULL)
- return -EINVAL;
+ newpn->dev = dev;
switch (plid) {
case BLKIO_POLICY_PROP:
- ret = strict_strtoul(s[1], 10, &temp);
- if (ret || (temp < BLKIO_WEIGHT_MIN && temp > 0) ||
- temp > BLKIO_WEIGHT_MAX)
+ if ((temp < BLKIO_WEIGHT_MIN && temp > 0) ||
+ temp > BLKIO_WEIGHT_MAX)
return -EINVAL;
newpn->plid = plid;
switch(fileid) {
case BLKIO_THROTL_read_bps_device:
case BLKIO_THROTL_write_bps_device:
- ret = strict_strtoull(s[1], 10, &bps);
- if (ret)
- return -EINVAL;
-
newpn->plid = plid;
newpn->fileid = fileid;
- newpn->val.bps = bps;
+ newpn->val.bps = temp;
break;
case BLKIO_THROTL_read_iops_device:
case BLKIO_THROTL_write_iops_device:
- ret = strict_strtoull(s[1], 10, &iops);
- if (ret)
- return -EINVAL;
-
- if (iops > THROTL_IOPS_MAX)
+ if (temp > THROTL_IOPS_MAX)
return -EINVAL;
newpn->plid = plid;
newpn->fileid = fileid;
- newpn->val.iops = (unsigned int)iops;
+ newpn->val.iops = (unsigned int)temp;
break;
}
break;
* true if merge was successful, otherwise false.
*/
static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q,
- struct bio *bio)
+ struct bio *bio, unsigned int *request_count)
{
struct blk_plug *plug;
struct request *rq;
plug = tsk->plug;
if (!plug)
goto out;
+ *request_count = 0;
list_for_each_entry_reverse(rq, &plug->list, queuelist) {
int el_ret;
+ (*request_count)++;
+
if (rq->q != q)
continue;
struct blk_plug *plug;
int el_ret, rw_flags, where = ELEVATOR_INSERT_SORT;
struct request *req;
+ unsigned int request_count = 0;
/*
* low level driver can indicate that it wants pages above a
* Check if we can merge with the plugged list before grabbing
* any locks.
*/
- if (attempt_plug_merge(current, q, bio))
+ if (attempt_plug_merge(current, q, bio, &request_count))
goto out;
spin_lock_irq(q->queue_lock);
if (__rq->q != q)
plug->should_sort = 1;
}
+ if (request_count >= BLK_MAX_REQUEST_COUNT)
+ blk_flush_plug_list(plug, false);
list_add_tail(&req->queuelist, &plug->list);
- plug->count++;
drive_stat_acct(req, 1);
- if (plug->count >= BLK_MAX_REQUEST_COUNT)
- blk_flush_plug_list(plug, false);
} else {
spin_lock_irq(q->queue_lock);
add_acct_request(q, req, where);
INIT_LIST_HEAD(&plug->list);
INIT_LIST_HEAD(&plug->cb_list);
plug->should_sort = 0;
- plug->count = 0;
/*
* If this is a nested plug, don't actually assign it. It will be
return;
list_splice_init(&plug->list, &list);
- plug->count = 0;
if (plug->should_sort) {
list_sort(NULL, &list, plug_rq_cmp);
/*
* Select completion CPU
*/
- if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags) && req->cpu != -1) {
+ if (req->cpu != -1) {
ccpu = req->cpu;
if (!test_bit(QUEUE_FLAG_SAME_FORCE, &q->queue_flags)) {
ccpu = blk_cpu_to_group(ccpu);
ret = queue_var_store(&val, page, count);
spin_lock_irq(q->queue_lock);
- if (val) {
+ if (val == 2) {
queue_flag_set(QUEUE_FLAG_SAME_COMP, q);
- if (val == 2)
- queue_flag_set(QUEUE_FLAG_SAME_FORCE, q);
- } else {
+ queue_flag_set(QUEUE_FLAG_SAME_FORCE, q);
+ } else if (val == 1) {
+ queue_flag_set(QUEUE_FLAG_SAME_COMP, q);
+ queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q);
+ } else if (val == 0) {
queue_flag_clear(QUEUE_FLAG_SAME_COMP, q);
queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q);
}
unsigned long slice_end;
long slice_resid;
- /* pending metadata requests */
- int meta_pending;
+ /* pending priority requests */
+ int prio_pending;
/* number of requests that are on the dispatch list or inside driver */
int dispatched;
if (rq_is_sync(rq1) != rq_is_sync(rq2))
return rq_is_sync(rq1) ? rq1 : rq2;
- if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_META)
- return rq1->cmd_flags & REQ_META ? rq1 : rq2;
+ if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_PRIO)
+ return rq1->cmd_flags & REQ_PRIO ? rq1 : rq2;
s1 = blk_rq_pos(rq1);
s2 = blk_rq_pos(rq2);
cfqq->cfqd->rq_queued--;
cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg,
rq_data_dir(rq), rq_is_sync(rq));
- if (rq->cmd_flags & REQ_META) {
- WARN_ON(!cfqq->meta_pending);
- cfqq->meta_pending--;
+ if (rq->cmd_flags & REQ_PRIO) {
+ WARN_ON(!cfqq->prio_pending);
+ cfqq->prio_pending--;
}
}
* So both queues are sync. Let the new request get disk time if
* it's a metadata request and the current queue is doing regular IO.
*/
- if ((rq->cmd_flags & REQ_META) && !cfqq->meta_pending)
+ if ((rq->cmd_flags & REQ_PRIO) && !cfqq->prio_pending)
return true;
/*
struct cfq_io_context *cic = RQ_CIC(rq);
cfqd->rq_queued++;
- if (rq->cmd_flags & REQ_META)
- cfqq->meta_pending++;
+ if (rq->cmd_flags & REQ_PRIO)
+ cfqq->prio_pending++;
cfq_update_io_thinktime(cfqd, cfqq, cic);
cfq_update_io_seektime(cfqd, cfqq, rq);
/* Maximum sleep allowed via Sleep() operator */
-#define ACPI_MAX_SLEEP 20000 /* Two seconds */
+#define ACPI_MAX_SLEEP 2000 /* Two seconds */
/******************************************************************************
*
bool "APEI Generic Hardware Error Source"
depends on ACPI_APEI && X86
select ACPI_HED
+ select IRQ_WORK
select LLIST
select GENERIC_ALLOCATOR
help
};
capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
- capbuf[OSC_SUPPORT_TYPE] = 0;
+ capbuf[OSC_SUPPORT_TYPE] = 1;
capbuf[OSC_CONTROL_TYPE] = 0;
if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle))
return dev ? dev->power.subsys_data : NULL;
}
+/**
+ * pm_clk_acquire - Acquire a device clock.
+ * @dev: Device whose clock is to be acquired.
+ * @ce: PM clock entry corresponding to the clock.
+ */
+static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce)
+{
+ ce->clk = clk_get(dev, ce->con_id);
+ if (IS_ERR(ce->clk)) {
+ ce->status = PCE_STATUS_ERROR;
+ } else {
+ ce->status = PCE_STATUS_ACQUIRED;
+ dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
+ }
+}
+
/**
* pm_clk_add - Start using a device clock for power management.
* @dev: Device whose clock is going to be used for power management.
}
}
+ pm_clk_acquire(dev, ce);
+
spin_lock_irq(&pcd->lock);
list_add_tail(&ce->node, &pcd->clock_list);
spin_unlock_irq(&pcd->lock);
/**
* __pm_clk_remove - Destroy PM clock entry.
* @ce: PM clock entry to destroy.
- *
- * This routine must be called under the spinlock protecting the PM list of
- * clocks corresponding the the @ce's device.
*/
static void __pm_clk_remove(struct pm_clock_entry *ce)
{
if (!ce)
return;
- list_del(&ce->node);
-
if (ce->status < PCE_STATUS_ERROR) {
if (ce->status == PCE_STATUS_ENABLED)
clk_disable(ce->clk);
spin_lock_irq(&pcd->lock);
list_for_each_entry(ce, &pcd->clock_list, node) {
- if (!con_id && !ce->con_id) {
- __pm_clk_remove(ce);
- break;
- } else if (!con_id || !ce->con_id) {
+ if (!con_id && !ce->con_id)
+ goto remove;
+ else if (!con_id || !ce->con_id)
continue;
- } else if (!strcmp(con_id, ce->con_id)) {
- __pm_clk_remove(ce);
- break;
- }
+ else if (!strcmp(con_id, ce->con_id))
+ goto remove;
}
spin_unlock_irq(&pcd->lock);
+ return;
+
+ remove:
+ list_del(&ce->node);
+ spin_unlock_irq(&pcd->lock);
+
+ __pm_clk_remove(ce);
}
/**
{
struct pm_clk_data *pcd = __to_pcd(dev);
struct pm_clock_entry *ce, *c;
+ struct list_head list;
if (!pcd)
return;
dev->power.subsys_data = NULL;
+ INIT_LIST_HEAD(&list);
spin_lock_irq(&pcd->lock);
list_for_each_entry_safe_reverse(ce, c, &pcd->clock_list, node)
- __pm_clk_remove(ce);
+ list_move(&ce->node, &list);
spin_unlock_irq(&pcd->lock);
kfree(pcd);
+
+ list_for_each_entry_safe_reverse(ce, c, &list, node) {
+ list_del(&ce->node);
+ __pm_clk_remove(ce);
+ }
}
#endif /* CONFIG_PM */
#ifdef CONFIG_PM_RUNTIME
-/**
- * pm_clk_acquire - Acquire a device clock.
- * @dev: Device whose clock is to be acquired.
- * @con_id: Connection ID of the clock.
- */
-static void pm_clk_acquire(struct device *dev,
- struct pm_clock_entry *ce)
-{
- ce->clk = clk_get(dev, ce->con_id);
- if (IS_ERR(ce->clk)) {
- ce->status = PCE_STATUS_ERROR;
- } else {
- ce->status = PCE_STATUS_ACQUIRED;
- dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
- }
-}
-
/**
* pm_clk_suspend - Disable clocks in a device's PM clock list.
* @dev: Device to disable the clocks for.
spin_lock_irqsave(&pcd->lock, flags);
list_for_each_entry_reverse(ce, &pcd->clock_list, node) {
- if (ce->status == PCE_STATUS_NONE)
- pm_clk_acquire(dev, ce);
-
if (ce->status < PCE_STATUS_ERROR) {
clk_disable(ce->clk);
ce->status = PCE_STATUS_ACQUIRED;
spin_lock_irqsave(&pcd->lock, flags);
list_for_each_entry(ce, &pcd->clock_list, node) {
- if (ce->status == PCE_STATUS_NONE)
- pm_clk_acquire(dev, ce);
-
if (ce->status < PCE_STATUS_ERROR) {
clk_enable(ce->clk);
ce->status = PCE_STATUS_ENABLED;
map->work_buf = kmalloc(map->format.buf_size, GFP_KERNEL);
if (map->work_buf == NULL) {
ret = -ENOMEM;
- goto err_bus;
+ goto err_map;
}
return map;
-err_bus:
- module_put(map->bus->owner);
err_map:
kfree(map);
err:
void regmap_exit(struct regmap *map)
{
kfree(map->work_buf);
- module_put(map->bus->owner);
kfree(map);
}
EXPORT_SYMBOL_GPL(regmap_exit);
use_virtual_dma = can_use_virtual_dma & 1;
fdc_state[0].address = FDC1;
if (fdc_state[0].address == -1) {
- del_timer(&fd_timeout);
+ del_timer_sync(&fd_timeout);
err = -ENODEV;
goto out_unreg_region;
}
fdc = 0; /* reset fdc in case of unexpected interrupt */
err = floppy_grab_irq_and_dma();
if (err) {
- del_timer(&fd_timeout);
+ del_timer_sync(&fd_timeout);
err = -EBUSY;
goto out_unreg_region;
}
user_reset_fdc(-1, FD_RESET_ALWAYS, false);
}
fdc = 0;
- del_timer(&fd_timeout);
+ del_timer_sync(&fd_timeout);
current_drive = 0;
initialized = true;
if (have_no_fdc) {
unregister_blkdev(FLOPPY_MAJOR, "fd");
out_put_disk:
while (dr--) {
- del_timer(&motor_off_timer[dr]);
+ del_timer_sync(&motor_off_timer[dr]);
if (disks[dr]->queue)
blk_cleanup_queue(disks[dr]->queue);
put_disk(disks[dr]);
#define DRV_PFX "xen-blkback:"
#define DPRINTK(fmt, args...) \
- pr_debug(DRV_PFX "(%s:%d) " fmt ".\n", \
+ pr_debug(DRV_PFX "(%s:%d) " fmt ".\n", \
__func__, __LINE__, ##args)
/*
* Enforce precondition before potential leak point.
- * blkif_disconnect() is idempotent.
+ * xen_blkif_disconnect() is idempotent.
*/
xen_blkif_disconnect(be->blkif);
break;
case XenbusStateClosing:
- xen_blkif_disconnect(be->blkif);
xenbus_switch_state(dev, XenbusStateClosing);
break;
case XenbusStateClosed:
+ xen_blkif_disconnect(be->blkif);
xenbus_switch_state(dev, XenbusStateClosed);
if (xenbus_dev_is_online(dev))
break;
/* fall through if not online */
case XenbusStateUnknown:
- /* implies blkif_disconnect() via blkback_remove() */
+ /* implies xen_blkif_disconnect() via xen_blkbk_remove() */
device_unregister(&dev->dev);
break;
/* Apple MacBookAir3,1, MacBookAir3,2 */
{ USB_DEVICE(0x05ac, 0x821b) },
+ /* Apple MacBookAir4,1 */
+ { USB_DEVICE(0x05ac, 0x821f) },
+
/* Apple MacBookPro8,2 */
{ USB_DEVICE(0x05ac, 0x821a) },
+ /* Apple MacMini5,1 */
+ { USB_DEVICE(0x05ac, 0x8281) },
+
/* AVM BlueFRITZ! USB v2.0 */
{ USB_DEVICE(0x057c, 0x3800) },
/* ------- Interfaces to HCI layer ------ */
/* protocol structure registered with shared transport */
static struct st_proto_s ti_st_proto[MAX_BT_CHNL_IDS] = {
+ {
+ .chnl_id = HCI_EVENT_PKT, /* HCI Events */
+ .hdr_len = sizeof(struct hci_event_hdr),
+ .offset_len_in_hdr = offsetof(struct hci_event_hdr, plen),
+ .len_size = 1, /* sizeof(plen) in struct hci_event_hdr */
+ .reserve = 8,
+ },
{
.chnl_id = HCI_ACLDATA_PKT, /* ACL */
.hdr_len = sizeof(struct hci_acl_hdr),
.len_size = 1, /* sizeof(dlen) in struct hci_sco_hdr */
.reserve = 8,
},
- {
- .chnl_id = HCI_EVENT_PKT, /* HCI Events */
- .hdr_len = sizeof(struct hci_event_hdr),
- .offset_len_in_hdr = offsetof(struct hci_event_hdr, plen),
- .len_size = 1, /* sizeof(plen) in struct hci_event_hdr */
- .reserve = 8,
- },
};
/* Called from HCI core to initialize the device */
if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
return 0;
- for (i = 0; i < MAX_BT_CHNL_IDS; i++) {
+ for (i = MAX_BT_CHNL_IDS-1; i >= 0; i--) {
err = st_unregister(&ti_st_proto[i]);
if (err)
BT_ERR("st_unregister(%d) failed with error %d",
config TCG_ATMEL
tristate "Atmel TPM Interface"
+ depends on PPC64 || HAS_IOPORT
---help---
If you have a TPM security chip from Atmel say Yes and it
will be accessible from within Linux. To compile this driver
u32 count, ordinal;
unsigned long stop;
+ if (bufsiz > TPM_BUFSIZE)
+ bufsiz = TPM_BUFSIZE;
+
count = be32_to_cpu(*((__be32 *) (buf + 2)));
ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
if (count == 0)
{
struct tpm_chip *chip = file->private_data;
ssize_t ret_size;
+ int rc;
del_singleshot_timer_sync(&chip->user_read_timer);
flush_work_sync(&chip->work);
ret_size = size;
mutex_lock(&chip->buffer_mutex);
- if (copy_to_user(buf, chip->data_buffer, ret_size))
+ rc = copy_to_user(buf, chip->data_buffer, ret_size);
+ memset(chip->data_buffer, 0, ret_size);
+ if (rc)
ret_size = -EFAULT;
+
mutex_unlock(&chip->buffer_mutex);
}
if (pdev) {
tpm_nsc_remove(&pdev->dev);
platform_device_unregister(pdev);
- kfree(pdev);
- pdev = NULL;
}
platform_driver_unregister(&nsc_drv);
pr = per_cpu(processors, cpu);
pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
+ if (!pr)
+ return -ENODEV;
+
status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer);
if (ACPI_FAILURE(status))
return -ENODEV;
* @tasklet: Tasklet that gets scheduled from interrupt context to complete a
* transfer and call client callback.
* @client: Cliented owned descriptor list.
+ * @pending_queue: Submitted jobs, to be issued by issue_pending()
* @active: Active descriptor.
* @queue: Queued jobs.
+ * @prepare_queue: Prepared jobs.
* @dma_cfg: The client configuration of this dma channel.
* @configured: whether the dma_cfg configuration is valid
* @base: Pointer to the device instance struct.
struct list_head pending_queue;
struct list_head active;
struct list_head queue;
+ struct list_head prepare_queue;
struct stedma40_chan_cfg dma_cfg;
bool configured;
struct d40_base *base;
list_for_each_entry_safe(d, _d, &d40c->client, node)
if (async_tx_test_ack(&d->txd)) {
- d40_pool_lli_free(d40c, d);
d40_desc_remove(d);
desc = d;
memset(desc, 0, sizeof(*desc));
return d;
}
+/* remove desc from current queue and add it to the pending_queue */
static void d40_desc_queue(struct d40_chan *d40c, struct d40_desc *desc)
{
+ d40_desc_remove(desc);
+ desc->is_in_client_list = false;
list_add_tail(&desc->node, &d40c->pending_queue);
}
static void d40_term_all(struct d40_chan *d40c)
{
struct d40_desc *d40d;
+ struct d40_desc *_d;
/* Release active descriptors */
while ((d40d = d40_first_active_get(d40c))) {
d40_desc_free(d40c, d40d);
}
+ /* Release client owned descriptors */
+ if (!list_empty(&d40c->client))
+ list_for_each_entry_safe(d40d, _d, &d40c->client, node) {
+ d40_desc_remove(d40d);
+ d40_desc_free(d40c, d40d);
+ }
+
+ /* Release descriptors in prepare queue */
+ if (!list_empty(&d40c->prepare_queue))
+ list_for_each_entry_safe(d40d, _d,
+ &d40c->prepare_queue, node) {
+ d40_desc_remove(d40d);
+ d40_desc_free(d40c, d40d);
+ }
+
d40c->pending_tx = 0;
d40c->busy = false;
}
if (!d40d->cyclic) {
if (async_tx_test_ack(&d40d->txd)) {
- d40_pool_lli_free(d40c, d40d);
d40_desc_remove(d40d);
d40_desc_free(d40c, d40d);
} else {
u32 event;
struct d40_phy_res *phy = d40c->phy_chan;
bool is_src;
- struct d40_desc *d;
- struct d40_desc *_d;
-
/* Terminate all queued and active transfers */
d40_term_all(d40c);
- /* Release client owned descriptors */
- if (!list_empty(&d40c->client))
- list_for_each_entry_safe(d, _d, &d40c->client, node) {
- d40_pool_lli_free(d40c, d);
- d40_desc_remove(d);
- d40_desc_free(d40c, d);
- }
-
if (phy == NULL) {
chan_err(d40c, "phy == null\n");
return -EINVAL;
goto err;
}
+ /*
+ * add descriptor to the prepare queue in order to be able
+ * to free them later in terminate_all
+ */
+ list_add_tail(&desc->node, &chan->prepare_queue);
+
spin_unlock_irqrestore(&chan->lock, flags);
return &desc->txd;
git.openpandora.org / pandora-kernel.git / commitdiff