F: drivers/net/ixgbe/
INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
-M: Zhu Yi <yi.zhu@intel.com>
M: Reinette Chatre <reinette.chatre@intel.com>
M: Intel Linux Wireless <ilw@linux.intel.com>
L: linux-wireless@vger.kernel.org
F: drivers/net/wireless/ipw2x00/ipw2100.*
INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
-M: Zhu Yi <yi.zhu@intel.com>
M: Reinette Chatre <reinette.chatre@intel.com>
M: Intel Linux Wireless <ilw@linux.intel.com>
L: linux-wireless@vger.kernel.org
F: include/linux/wimax/i2400m.h
INTEL WIRELESS WIFI LINK (iwlwifi)
-M: Zhu Yi <yi.zhu@intel.com>
M: Reinette Chatre <reinette.chatre@intel.com>
+M: Wey-Yi Guy <wey-yi.w.guy@intel.com>
M: Intel Linux Wireless <ilw@linux.intel.com>
L: linux-wireless@vger.kernel.org
W: http://intellinuxwireless.org
INTEL WIRELESS MULTICOMM 3200 WIFI (iwmc3200wifi)
M: Samuel Ortiz <samuel.ortiz@intel.com>
-M: Zhu Yi <yi.zhu@intel.com>
M: Intel Linux Wireless <ilw@linux.intel.com>
L: linux-wireless@vger.kernel.org
S: Supported
if (!save)
return 0;
- spin_lock_irqsave(&sachip->lock, flags);
-
/*
* Ensure that the SA1111 is still here.
* FIXME: shouldn't do this here.
* First of all, wake up the chip.
*/
sa1111_wake(sachip);
+
+ /*
+ * Only lock for write ops. Also, sa1111_wake must be called with
+ * released spinlock!
+ */
+ spin_lock_irqsave(&sachip->lock, flags);
+
sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
#include <linux/err.h>
#include <linux/io.h>
#include <linux/interrupt.h>
+#include <linux/completion.h>
#include <mach/dma.h>
#define MSM_DMOV_CHANNEL_COUNT 16
}
EXPORT_SYMBOL(clk_disable);
-/* We have a fixed clock alone, for now */
+static struct clk clk_24 = {
+ .rate = 2400000,
+};
+
static struct clk clk_48 = {
.rate = 48 * 1000 * 1000,
};
}
static struct clk_lookup lookups[] = {
+ CLK(&clk_24, "mtu0"),
+ CLK(&clk_24, "mtu1"),
CLK(&clk_48, "uart0"),
CLK(&clk_48, "uart1"),
CLK(&clk_default, "gpio.0"),
CLK(&clk_default, "rng"),
};
-static int __init clk_init(void)
+int __init clk_init(void)
{
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
return 0;
}
-
-arch_initcall(clk_init);
struct clk {
unsigned long rate;
};
+
+int __init clk_init(void);
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
+#include "clock.h"
+
#define __MEM_4K_RESOURCE(x) \
.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
/* This modified VIC cell has two register blocks, at 0 and 0x20 */
vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START + 0, ~0, 0);
vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
+
+ /*
+ * Init clocks here so that they are available for system timer
+ * initialization.
+ */
+ clk_init();
}
/*
.keymap_size = ARRAY_SIZE(palmtc_matrix_keys),
};
-const static unsigned int palmtc_keypad_row_gpios[] = {
+static const unsigned int palmtc_keypad_row_gpios[] = {
0, 9, 10, 11
};
-const static unsigned int palmtc_keypad_col_gpios[] = {
+static const unsigned int palmtc_keypad_col_gpios[] = {
18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
};
.type = "max7310",
.addr = 0x18,
.platform_data = &akita_ioexp,
+ }, {
+ .type = "wm8750",
+ .addr = 0x1b,
},
};
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o
obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o
obj-$(CONFIG_MACH_U5500) += board-u5500.o
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
#include <asm/clkdev.h>
+#include <plat/mtu.h>
#include <mach/hardware.h>
#include "clock.h"
#define PRCM_DMACLK_MGT 0x074
#define PRCM_B2R2CLK_MGT 0x078
#define PRCM_TVCLK_MGT 0x07C
+#define PRCM_TCR 0x1C8
+#define PRCM_TCR_STOPPED (1 << 16)
+#define PRCM_TCR_DOZE_MODE (1 << 17)
#define PRCM_UNIPROCLK_MGT 0x278
#define PRCM_SSPCLK_MGT 0x280
#define PRCM_RNGCLK_MGT 0x284
}
EXPORT_SYMBOL(clk_disable);
+/*
+ * The MTU has a separate, rather complex muxing setup
+ * with alternative parents (peripheral cluster or
+ * ULP or fixed 32768 Hz) depending on settings
+ */
+static unsigned long clk_mtu_get_rate(struct clk *clk)
+{
+ void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+ + PRCM_TCR;
+ u32 tcr = readl(addr);
+ int mtu = (int) clk->data;
+ /*
+ * One of these is selected eventually
+ * TODO: Replace the constant with a reference
+ * to the ULP source once this is modeled.
+ */
+ unsigned long clk32k = 32768;
+ unsigned long mturate;
+ unsigned long retclk;
+
+ /* Get the rate from the parent as a default */
+ if (clk->parent_periph)
+ mturate = clk_get_rate(clk->parent_periph);
+ else if (clk->parent_cluster)
+ mturate = clk_get_rate(clk->parent_cluster);
+ else
+ /* We need to be connected SOMEWHERE */
+ BUG();
+
+ /*
+ * Are we in doze mode?
+ * In this mode the parent peripheral or the fixed 32768 Hz
+ * clock is fed into the block.
+ */
+ if (!(tcr & PRCM_TCR_DOZE_MODE)) {
+ /*
+ * Here we're using the clock input from the APE ULP
+ * clock domain. But first: are the timers stopped?
+ */
+ if (tcr & PRCM_TCR_STOPPED) {
+ clk32k = 0;
+ mturate = 0;
+ } else {
+ /* Else default mode: 0 and 2.4 MHz */
+ clk32k = 0;
+ if (cpu_is_u5500())
+ /* DB5500 divides by 8 */
+ mturate /= 8;
+ else if (cpu_is_u8500ed()) {
+ /*
+ * This clocking setting must not be used
+ * in the ED chip, it is simply not
+ * connected anywhere!
+ */
+ mturate = 0;
+ BUG();
+ } else
+ /*
+ * In this mode the ulp38m4 clock is divided
+ * by a factor 16, on the DB8500 typically
+ * 38400000 / 16 ~ 2.4 MHz.
+ * TODO: Replace the constant with a reference
+ * to the ULP source once this is modeled.
+ */
+ mturate = 38400000 / 16;
+ }
+ }
+
+ /* Return the clock selected for this MTU */
+ if (tcr & (1 << mtu))
+ retclk = clk32k;
+ else
+ retclk = mturate;
+
+ pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
+ return retclk;
+}
+
unsigned long clk_get_rate(struct clk *clk)
{
unsigned long rate;
+ /*
+ * If there is a custom getrate callback for this clock,
+ * it will take precedence.
+ */
+ if (clk->get_rate)
+ return clk->get_rate(clk);
+
if (clk->ops && clk->ops->get_rate)
return clk->ops->get_rate(clk);
/* Peripheral Cluster #6 */
-static DEFINE_PRCC_CLK(6, mtu1_v1, 8, -1, NULL);
-static DEFINE_PRCC_CLK(6, mtu0_v1, 7, -1, NULL);
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu1_v1, 8, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu0_v1, 7, -1, NULL, clk_mtu_get_rate, 0);
static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL);
static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL);
static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL);
/* Peripheral Cluster #7 */
static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL);
-static DEFINE_PRCC_CLK(7, mtu1_ed, 3, -1, NULL);
-static DEFINE_PRCC_CLK(7, mtu0_ed, 2, -1, NULL);
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu1_ed, 3, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0);
static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL);
static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL);
CLK(uiccclk, "uicc", NULL),
};
-static int __init clk_init(void)
+int __init clk_init(void)
{
if (cpu_is_u8500ed()) {
clk_prcmu_ops.enable = clk_prcmu_ed_enable;
clk_prcmu_ops.disable = clk_prcmu_ed_disable;
+ clk_per6clk.rate = 100000000;
} else if (cpu_is_u5500()) {
/* Clock tree for U5500 not implemented yet */
clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
+ clk_per6clk.rate = 26000000;
}
clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
return 0;
}
-arch_initcall(clk_init);
* @ops: pointer to clkops struct used to control this clock
* @name: name, for debugging
* @enabled: refcount. positive if enabled, zero if disabled
+ * @get_rate: custom callback for getting the clock rate
+ * @data: custom per-clock data for example for the get_rate
+ * callback
* @rate: fixed rate for clocks which don't implement
* ops->getrate
* @prcmu_cg_off: address offset of the combined enable/disable register
const struct clkops *ops;
const char *name;
unsigned int enabled;
+ unsigned long (*get_rate)(struct clk *);
+ void *data;
unsigned long rate;
struct list_head list;
.parent_periph = _kernclk \
}
+#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \
+struct clk clk_##_name = { \
+ .name = #_name, \
+ .ops = &clk_prcc_ops, \
+ .cluster = _pclust, \
+ .prcc_bus = _bus_en, \
+ .prcc_kernel = _kernel_en, \
+ .parent_cluster = &clk_per##_pclust##clk, \
+ .parent_periph = _kernclk, \
+ .get_rate = _callback, \
+ .data = (void *) _data \
+ }
+
+
#define CLK(_clk, _devname, _conname) \
{ \
.clk = &clk_##_clk, \
.dev_id = _devname, \
.con_id = _conname, \
}
+
+int __init clk_db8500_ed_fixup(void);
+int __init clk_init(void);
{
gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29);
gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
+
+ /*
+ * Init clocks here so that they are available for system timer
+ * initialization.
+ */
+ clk_init();
}
#ifdef CONFIG_CACHE_L2X0
{
asm("\
stmfd sp!, {r4-r9, lr} \n\
- mov ip, %0 \n\
+ mov ip, %2 \n\
1: mov lr, r1 \n\
ldmia r1!, {r2 - r9} \n\
pld [lr, #32] \n\
mcr p15, 0, ip, c7, c10, 4 @ drain WB\n\
ldmfd sp!, {r4-r9, pc}"
:
- : "I" (PAGE_SIZE));
+ : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE));
}
void feroceon_copy_user_highpage(struct page *to, struct page *from,
{
asm("\
stmfd sp!, {r4, lr} @ 2\n\
- mov r2, %0 @ 1\n\
+ mov r2, %2 @ 1\n\
ldmia r1!, {r3, r4, ip, lr} @ 4\n\
1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\
stmia r0!, {r3, r4, ip, lr} @ 4\n\
mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB\n\
ldmfd sp!, {r4, pc} @ 3"
:
- : "I" (PAGE_SIZE / 64));
+ : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
}
void v4wb_copy_user_highpage(struct page *to, struct page *from,
{
asm("\
stmfd sp!, {r4, lr} @ 2\n\
- mov r2, %0 @ 1\n\
+ mov r2, %2 @ 1\n\
ldmia r1!, {r3, r4, ip, lr} @ 4\n\
1: stmia r0!, {r3, r4, ip, lr} @ 4\n\
ldmia r1!, {r3, r4, ip, lr} @ 4+1\n\
mcr p15, 0, r2, c7, c7, 0 @ flush ID cache\n\
ldmfd sp!, {r4, pc} @ 3"
:
- : "I" (PAGE_SIZE / 64));
+ : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
}
void v4wt_copy_user_highpage(struct page *to, struct page *from,
{
asm("\
stmfd sp!, {r4, r5, lr} \n\
- mov lr, %0 \n\
+ mov lr, %2 \n\
\n\
pld [r1, #0] \n\
pld [r1, #32] \n\
\n\
ldmfd sp!, {r4, r5, pc}"
:
- : "I" (PAGE_SIZE / 64 - 1));
+ : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64 - 1));
}
void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,
if (addr < TASK_SIZE)
return do_page_fault(addr, fsr, regs);
+ if (user_mode(regs))
+ goto bad_area;
+
index = pgd_index(addr);
/*
debug_kmap_atomic(type);
- kmap = kmap_high_get(page);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ /*
+ * There is no cache coherency issue when non VIVT, so force the
+ * dedicated kmap usage for better debugging purposes in that case.
+ */
+ if (!cache_is_vivt())
+ kmap = NULL;
+ else
+#endif
+ kmap = kmap_high_get(page);
if (kmap)
return kmap;
void free_initmem(void)
{
#ifdef CONFIG_HAVE_TCM
- extern char *__tcm_start, *__tcm_end;
+ extern char __tcm_start, __tcm_end;
- totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)),
- __phys_to_pfn(__pa(__tcm_end)),
+ totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)),
+ __phys_to_pfn(__pa(&__tcm_end)),
"TCM link");
#endif
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/clockchips.h>
+#include <linux/clk.h>
#include <linux/jiffies.h>
+#include <linux/err.h>
#include <asm/mach/time.h>
#include <plat/mtu.h>
void __init nmdk_timer_init(void)
{
unsigned long rate;
- u32 cr = MTU_CRn_32BITS;;
+ struct clk *clk0;
+ struct clk *clk1;
+ u32 cr;
+
+ clk0 = clk_get_sys("mtu0", NULL);
+ BUG_ON(IS_ERR(clk0));
+
+ clk1 = clk_get_sys("mtu1", NULL);
+ BUG_ON(IS_ERR(clk1));
+
+ clk_enable(clk0);
+ clk_enable(clk1);
/*
* Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
* use a divide-by-16 counter if it's more than 16MHz
*/
- rate = CLOCK_TICK_RATE;
+ cr = MTU_CRn_32BITS;;
+ rate = clk_get_rate(clk0);
if (rate > 16 << 20) {
rate /= 16;
cr |= MTU_CRn_PRESCALE_16;
nmdk_clksrc.name);
/* Timer 1 is used for events, fix according to rate */
+ cr = MTU_CRn_32BITS;
+ rate = clk_get_rate(clk1);
+ if (rate > 16 << 20) {
+ rate /= 16;
+ cr |= MTU_CRn_PRESCALE_16;
+ } else {
+ cr |= MTU_CRn_PRESCALE_1;
+ }
writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
nmdk_clkevt.max_delta_ns =
#ifdef CONFIG_VFPv3
@ d16 - d31 registers
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1: mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr
+1: mcrr p11, 3, r0, r1, c\dr @ fmdrr r0, r1, d\dr
mov pc, lr
.org 1b + 8
.endr
flush_cache = 1;
break;
+ /* pNN: Read value of reg N and return it */
+ case 'p':
+ /* return no value, indicating that we don't support
+ * this command and that gdb should use 'g' instead */
+ break;
+
/* PNN,=RRRRRRRR: Write value R to reg N return OK */
case 'P':
ptr = &input_buffer[1];
/* MS be sure that SLAB allocates aligned objects */
#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_SLAB_MINALIGN L1_CACHE_BYTES
+
#define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
#define PAGE_DOWN(addr) ((addr)&(~((PAGE_SIZE)-1)))
/* FIXME this part of code is untested */
for_each_sg(sgl, sg, nents, i) {
sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
- sg->dma_length = sg->length;
__dma_sync_page(page_to_phys(sg_page(sg)), sg->offset,
sg->length, direction);
}
index = ENTRIES-1;
/* make sure index is valid */
- if ((index > ENTRIES) || (index < 0))
+ if ((index >= ENTRIES) || (index < 0))
index = ENTRIES-1;
return initial_lfsr[index];
goto out;
}
- appldata_os_data = kzalloc(max_size, GFP_DMA);
+ appldata_os_data = kzalloc(max_size, GFP_KERNEL | GFP_DMA);
if (appldata_os_data == NULL) {
rc = -ENOMEM;
goto out;
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc3
-# Fri Apr 9 09:57:10 2010
+# Linux kernel version: 2.6.35-rc1
+# Fri Jun 4 11:32:40 2010
#
CONFIG_SCHED_MC=y
CONFIG_MMU=y
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_BLK_CGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_CGROUP is not set
CONFIG_BLOCK_COMPAT=y
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_CFQ_GROUP_IOSCHED is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_HOTPLUG_CPU=y
-# CONFIG_SCHED_BOOK is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_AUDIT_ARCH=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=9
-# CONFIG_PROCESS_DEBUG is not set
CONFIG_PFAULT=y
# CONFIG_SHARED_KERNEL is not set
# CONFIG_CMM is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
+# CONFIG_NET_SCTPPROBE is not set
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
+CONFIG_RPS=y
#
# Network testing
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
# CONFIG_PCMCIA is not set
CONFIG_CCW=y
# Character devices
#
CONFIG_DEVKMEM=y
+# CONFIG_N_GSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_MONREADER is not set
CONFIG_MONWRITER=m
CONFIG_S390_VMUR=m
+# CONFIG_RAMOOPS is not set
#
# PPS support
# CONFIG_NEW_LEDS is not set
CONFIG_ACCESSIBILITY=y
# CONFIG_AUXDISPLAY is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_LKDTM is not set
+# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KPROBE_EVENT=y
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_TRACEPOINTS is not set
# CONFIG_SAMPLE_TRACE_EVENTS is not set
/* Free memory returned from module_alloc */
void module_free(struct module *mod, void *module_region)
{
- vfree(mod->arch.syminfo);
- mod->arch.syminfo = NULL;
+ if (mod) {
+ vfree(mod->arch.syminfo);
+ mod->arch.syminfo = NULL;
+ }
vfree(module_region);
}
* to hold the maximum amount of facilites. On the other hand, we
* only set facilities that are known to work in KVM.
*/
- facilities = (unsigned long long *) get_zeroed_page(GFP_DMA);
+ facilities = (unsigned long long *) get_zeroed_page(GFP_KERNEL|GFP_DMA);
if (!facilities) {
kvm_exit();
return -ENOMEM;
{
struct kvm_s390_interrupt_info *inti;
- inti = kzalloc(sizeof(*inti), GFP_KERNEL);
+ inti = kzalloc(sizeof(*inti), GFP_ATOMIC);
if (!inti)
return -ENOMEM;
inti->type = KVM_S390_SIGP_STOP;
dcss_set_subcodes(void)
{
#ifdef CONFIG_64BIT
- char *name = kmalloc(8 * sizeof(char), GFP_DMA);
+ char *name = kmalloc(8 * sizeof(char), GFP_KERNEL | GFP_DMA);
unsigned long rx, ry;
int rc;
static int
query_segment_type (struct dcss_segment *seg)
{
- struct qin64 *qin = kmalloc (sizeof(struct qin64), GFP_DMA);
- struct qout64 *qout = kmalloc (sizeof(struct qout64), GFP_DMA);
-
- int diag_cc, rc, i;
unsigned long dummy, vmrc;
+ int diag_cc, rc, i;
+ struct qout64 *qout;
+ struct qin64 *qin;
+ qin = kmalloc(sizeof(*qin), GFP_KERNEL | GFP_DMA);
+ qout = kmalloc(sizeof(*qout), GFP_KERNEL | GFP_DMA);
if ((qin == NULL) || (qout == NULL)) {
rc = -ENOMEM;
goto out_free;
copy data for the new format. */
if (segext_scode == DCSS_SEGEXT) {
struct qout64_old *qout_old;
- qout_old = kzalloc(sizeof(struct qout64_old), GFP_DMA);
+ qout_old = kzalloc(sizeof(*qout_old), GFP_KERNEL | GFP_DMA);
if (qout_old == NULL) {
rc = -ENOMEM;
goto out_free;
static int
__segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long *end)
{
- struct dcss_segment *seg = kmalloc(sizeof(struct dcss_segment),
- GFP_DMA);
- int rc, diag_cc;
unsigned long start_addr, end_addr, dummy;
+ struct dcss_segment *seg;
+ int rc, diag_cc;
+ seg = kmalloc(sizeof(*seg), GFP_KERNEL | GFP_DMA);
if (seg == NULL) {
rc = -ENOMEM;
goto out;
return -EINVAL;
}
-static int ahci_is_device_present(void __iomem *port_mmio)
-{
- u8 status = readl(port_mmio + PORT_TFDATA) & 0xff;
-
- /* Make sure PxTFD.STS.BSY and PxTFD.STS.DRQ are 0 */
- if (status & (ATA_BUSY | ATA_DRQ))
- return 0;
-
- /* Make sure PxSSTS.DET is 3h */
- status = readl(port_mmio + PORT_SCR_STAT) & 0xf;
- if (status != 3)
- return 0;
- return 1;
-}
-
void ahci_start_engine(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
u32 tmp;
- if (!ahci_is_device_present(port_mmio))
- return;
-
/* start DMA */
tmp = readl(port_mmio + PORT_CMD);
tmp |= PORT_CMD_START;
}
sata_pmp_error_handler(ap);
+
+ if (!ata_dev_enabled(ap->link.device))
+ ahci_stop_engine(ap);
}
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
/* zero error counters. */
- writel(0x8000, port + PORT_DECODE_ERR_THRESH);
- writel(0x8000, port + PORT_CRC_ERR_THRESH);
- writel(0x8000, port + PORT_HSHK_ERR_THRESH);
- writel(0x0000, port + PORT_DECODE_ERR_CNT);
- writel(0x0000, port + PORT_CRC_ERR_CNT);
- writel(0x0000, port + PORT_HSHK_ERR_CNT);
+ writew(0x8000, port + PORT_DECODE_ERR_THRESH);
+ writew(0x8000, port + PORT_CRC_ERR_THRESH);
+ writew(0x8000, port + PORT_HSHK_ERR_THRESH);
+ writew(0x0000, port + PORT_DECODE_ERR_CNT);
+ writew(0x0000, port + PORT_CRC_ERR_CNT);
+ writew(0x0000, port + PORT_HSHK_ERR_CNT);
/* always use 64bit activation */
writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
/*
* vt6421 has problems talking to some drives. The following
- * is the magic fix from Joseph Chan <JosephChan@via.com.tw>.
- * Please add proper documentation if possible.
+ * is the fix from Joseph Chan <JosephChan@via.com.tw>.
+ *
+ * When host issues HOLD, device may send up to 20DW of data
+ * before acknowledging it with HOLDA and the host should be
+ * able to buffer them in FIFO. Unfortunately, some WD drives
+ * send upto 40DW before acknowledging HOLD and, in the
+ * default configuration, this ends up overflowing vt6421's
+ * FIFO, making the controller abort the transaction with
+ * R_ERR.
+ *
+ * Rx52[2] is the internal 128DW FIFO Flow control watermark
+ * adjusting mechanism enable bit and the default value 0
+ * means host will issue HOLD to device when the left FIFO
+ * size goes below 32DW. Setting it to 1 makes the watermark
+ * 64DW.
*
* https://bugzilla.kernel.org/show_bug.cgi?id=15173
+ * http://article.gmane.org/gmane.linux.ide/46352
*/
if (pdev->device == 0x3249) {
pci_read_config_byte(pdev, 0x52, &tmp8);
d = (unsigned short *)(vc->vc_origin + vc->vc_size_row * t);
s = (unsigned short *)(vc->vc_origin + vc->vc_size_row * (t + nr));
scr_memmovew(d, s, (b - t - nr) * vc->vc_size_row);
- scr_memsetw(d + (b - t - nr) * vc->vc_size_row, vc->vc_video_erase_char,
+ scr_memsetw(d + (b - t - nr) * vc->vc_cols, vc->vc_video_erase_char,
vc->vc_size_row * nr);
}
static void fw_card_bm_work(struct work_struct *work)
{
struct fw_card *card = container_of(work, struct fw_card, work.work);
- struct fw_device *root_device;
+ struct fw_device *root_device, *irm_device;
struct fw_node *root_node;
unsigned long flags;
int root_id, new_root_id, irm_id, local_id;
bool do_reset = false;
bool root_device_is_running;
bool root_device_is_cmc;
+ bool irm_is_1394_1995_only;
spin_lock_irqsave(&card->lock, flags);
}
generation = card->generation;
+
root_node = card->root_node;
fw_node_get(root_node);
root_device = root_node->data;
root_device_is_running = root_device &&
atomic_read(&root_device->state) == FW_DEVICE_RUNNING;
root_device_is_cmc = root_device && root_device->cmc;
+
+ irm_device = card->irm_node->data;
+ irm_is_1394_1995_only = irm_device && irm_device->config_rom &&
+ (irm_device->config_rom[2] & 0x000000f0) == 0;
+
root_id = root_node->node_id;
irm_id = card->irm_node->node_id;
local_id = card->local_node->node_id;
if (!card->irm_node->link_on) {
new_root_id = local_id;
- fw_notify("IRM has link off, making local node (%02x) root.\n",
- new_root_id);
+ fw_notify("%s, making local node (%02x) root.\n",
+ "IRM has link off", new_root_id);
+ goto pick_me;
+ }
+
+ if (irm_is_1394_1995_only) {
+ new_root_id = local_id;
+ fw_notify("%s, making local node (%02x) root.\n",
+ "IRM is not 1394a compliant", new_root_id);
goto pick_me;
}
* root, and thus, IRM.
*/
new_root_id = local_id;
- fw_notify("BM lock failed, making local node (%02x) root.\n",
- new_root_id);
+ fw_notify("%s, making local node (%02x) root.\n",
+ "BM lock failed", new_root_id);
goto pick_me;
}
} else if (card->bm_generation != generation) {
ret = copy_from_user(clips, clips_ptr,
num_clips * sizeof(*clips));
- if (ret)
+ if (ret) {
+ ret = -EFAULT;
goto out_err2;
+ }
}
if (fb->funcs->dirty) {
int drm_fb_helper_panic(struct notifier_block *n, unsigned long ununsed,
void *panic_str)
{
- DRM_ERROR("panic occurred, switching back to text console\n");
+ printk(KERN_ERR "panic occurred, switching back to text console\n");
return drm_fb_helper_force_kernel_mode();
return 0;
}
/* if we have > 1 VGA cards, then disable the radeon VGA resources */
ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
if (ret)
- goto destroy_ringbuffer;
+ goto cleanup_ringbuffer;
ret = vga_switcheroo_register_client(dev->pdev,
i915_switcheroo_set_state,
i915_switcheroo_can_switch);
if (ret)
- goto destroy_ringbuffer;
+ goto cleanup_vga_client;
intel_modeset_init(dev);
ret = drm_irq_install(dev);
if (ret)
- goto destroy_ringbuffer;
+ goto cleanup_vga_switcheroo;
/* Always safe in the mode setting case. */
/* FIXME: do pre/post-mode set stuff in core KMS code */
I915_WRITE(INSTPM, (1 << 5) | (1 << 21));
- intel_fbdev_init(dev);
+ ret = intel_fbdev_init(dev);
+ if (ret)
+ goto cleanup_irq;
+
drm_kms_helper_poll_init(dev);
return 0;
-destroy_ringbuffer:
+cleanup_irq:
+ drm_irq_uninstall(dev);
+cleanup_vga_switcheroo:
+ vga_switcheroo_unregister_client(dev->pdev);
+cleanup_vga_client:
+ vga_client_register(dev->pdev, NULL, NULL, NULL);
+cleanup_ringbuffer:
mutex_lock(&dev->struct_mutex);
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
struct mem_block *agp_heap;
unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds;
int vblank_pipe;
+ int num_pipe;
/* For hangcheck timer */
#define DRM_I915_HANGCHECK_PERIOD 75 /* in jiffies */
pipeconf &= ~PIPEACONF_DOUBLE_WIDE;
}
+ dspcntr |= DISPLAY_PLANE_ENABLE;
+ pipeconf |= PIPEACONF_ENABLE;
+ dpll |= DPLL_VCO_ENABLE;
+
+
/* Disable the panel fitter if it was on our pipe */
if (!HAS_PCH_SPLIT(dev) && intel_panel_fitter_pipe(dev) == pipe)
I915_WRITE(PFIT_CONTROL, 0);
void intel_modeset_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int num_pipe;
int i;
drm_mode_config_init(dev);
dev->mode_config.fb_base = pci_resource_start(dev->pdev, 0);
if (IS_MOBILE(dev) || IS_I9XX(dev))
- num_pipe = 2;
+ dev_priv->num_pipe = 2;
else
- num_pipe = 1;
+ dev_priv->num_pipe = 1;
DRM_DEBUG_KMS("%d display pipe%s available.\n",
- num_pipe, num_pipe > 1 ? "s" : "");
+ dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : "");
- for (i = 0; i < num_pipe; i++) {
+ for (i = 0; i < dev_priv->num_pipe; i++) {
intel_crtc_init(dev, i);
}
{
struct intel_fbdev *ifbdev;
drm_i915_private_t *dev_priv = dev->dev_private;
+ int ret;
ifbdev = kzalloc(sizeof(struct intel_fbdev), GFP_KERNEL);
if (!ifbdev)
dev_priv->fbdev = ifbdev;
ifbdev->helper.funcs = &intel_fb_helper_funcs;
- drm_fb_helper_init(dev, &ifbdev->helper, 2,
- INTELFB_CONN_LIMIT);
+ ret = drm_fb_helper_init(dev, &ifbdev->helper,
+ dev_priv->num_pipe,
+ INTELFB_CONN_LIMIT);
+ if (ret) {
+ kfree(ifbdev);
+ return ret;
+ }
drm_fb_helper_single_add_all_connectors(&ifbdev->helper);
drm_fb_helper_initial_config(&ifbdev->helper, 32);
if (i2c_index == 0x81)
i2c_index = (dcb->i2c_default_indices & 0xf0) >> 4;
- if (i2c_index > DCB_MAX_NUM_I2C_ENTRIES) {
+ if (i2c_index >= DCB_MAX_NUM_I2C_ENTRIES) {
NV_ERROR(dev, "invalid i2c_index 0x%x\n", i2c_index);
return NULL;
}
static uint8_t *
bios_output_config_match(struct drm_device *dev, struct dcb_entry *dcbent,
- uint16_t record, int record_len, int record_nr)
+ uint16_t record, int record_len, int record_nr,
+ bool match_link)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nvbios *bios = &dev_priv->vbios;
uint16_t table;
int i, v;
+ switch (dcbent->type) {
+ case OUTPUT_TMDS:
+ case OUTPUT_LVDS:
+ case OUTPUT_DP:
+ break;
+ default:
+ match_link = false;
+ break;
+ }
+
for (i = 0; i < record_nr; i++, record += record_len) {
table = ROM16(bios->data[record]);
if (!table)
continue;
entry = ROM32(bios->data[table]);
+ if (match_link) {
+ v = (entry & 0x00c00000) >> 22;
+ if (!(v & dcbent->sorconf.link))
+ continue;
+ }
+
v = (entry & 0x000f0000) >> 16;
if (!(v & dcbent->or))
continue;
*length = table[4];
return bios_output_config_match(dev, dcbent,
bios->display.dp_table_ptr + table[1],
- table[2], table[3]);
+ table[2], table[3], table[0] >= 0x21);
}
int
dcbent->type, dcbent->location, dcbent->or);
otable = bios_output_config_match(dev, dcbent, table[1] +
bios->display.script_table_ptr,
- table[2], table[3]);
+ table[2], table[3], table[0] >= 0x21);
if (!otable) {
NV_ERROR(dev, "Couldn't find matching output script table\n");
return 1;
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_fbdev *nfbdev;
+ int ret;
nfbdev = kzalloc(sizeof(struct nouveau_fbdev), GFP_KERNEL);
if (!nfbdev)
dev_priv->nfbdev = nfbdev;
nfbdev->helper.funcs = &nouveau_fbcon_helper_funcs;
- drm_fb_helper_init(dev, &nfbdev->helper, 2, 4);
+ ret = drm_fb_helper_init(dev, &nfbdev->helper, 2, 4);
+ if (ret) {
+ kfree(nfbdev);
+ return ret;
+ }
+
drm_fb_helper_single_add_all_connectors(&nfbdev->helper);
drm_fb_helper_initial_config(&nfbdev->helper, 32);
return 0;
return ret;
}
- /* map larger RAMIN aperture on NV40 cards */
- dev_priv->ramin = NULL;
+ /* Map PRAMIN BAR, or on older cards, the aperture withing BAR0 */
if (dev_priv->card_type >= NV_40) {
int ramin_bar = 2;
if (pci_resource_len(dev->pdev, ramin_bar) == 0)
ramin_bar = 3;
dev_priv->ramin_size = pci_resource_len(dev->pdev, ramin_bar);
- dev_priv->ramin = ioremap(
- pci_resource_start(dev->pdev, ramin_bar),
+ dev_priv->ramin =
+ ioremap(pci_resource_start(dev->pdev, ramin_bar),
dev_priv->ramin_size);
if (!dev_priv->ramin) {
- NV_ERROR(dev, "Failed to init RAMIN mapping, "
- "limited instance memory available\n");
+ NV_ERROR(dev, "Failed to PRAMIN BAR");
+ return -ENOMEM;
}
- }
-
- /* On older cards (or if the above failed), create a map covering
- * the BAR0 PRAMIN aperture */
- if (!dev_priv->ramin) {
+ } else {
dev_priv->ramin_size = 1 * 1024 * 1024;
dev_priv->ramin = ioremap(mmio_start_offs + NV_RAMIN,
- dev_priv->ramin_size);
+ dev_priv->ramin_size);
if (!dev_priv->ramin) {
NV_ERROR(dev, "Failed to map BAR0 PRAMIN.\n");
return -ENOMEM;
int
nv50_fb_init(struct drm_device *dev)
{
- /* This is needed to get meaningful information from 100c90
- * on traps. No idea what these values mean exactly. */
struct drm_nouveau_private *dev_priv = dev->dev_private;
+ /* Not a clue what this is exactly. Without pointing it at a
+ * scratch page, VRAM->GART blits with M2MF (as in DDX DFS)
+ * cause IOMMU "read from address 0" errors (rh#561267)
+ */
+ nv_wr32(dev, 0x100c08, dev_priv->gart_info.sg_dummy_bus >> 8);
+
+ /* This is needed to get meaningful information from 100c90
+ * on traps. No idea what these values mean exactly. */
switch (dev_priv->chipset) {
case 0x50:
nv_wr32(dev, 0x100c90, 0x0707ff);
{
const uint32_t nv50_gpio_reg[4] = { 0xe104, 0xe108, 0xe280, 0xe284 };
- if (gpio->line > 32)
+ if (gpio->line >= 32)
return -EINVAL;
*reg = nv50_gpio_reg[gpio->line >> 3];
void evergreen_pm_misc(struct radeon_device *rdev)
{
- int requested_index = rdev->pm.requested_power_state_index;
- struct radeon_power_state *ps = &rdev->pm.power_state[requested_index];
- struct radeon_voltage *voltage = &ps->clock_info[0].voltage;
-
- if ((voltage->type == VOLTAGE_SW) && voltage->voltage)
- radeon_atom_set_voltage(rdev, voltage->voltage);
+ int req_ps_idx = rdev->pm.requested_power_state_index;
+ int req_cm_idx = rdev->pm.requested_clock_mode_index;
+ struct radeon_power_state *ps = &rdev->pm.power_state[req_ps_idx];
+ struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
+
+ if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
+ if (voltage->voltage != rdev->pm.current_vddc) {
+ radeon_atom_set_voltage(rdev, voltage->voltage);
+ rdev->pm.current_vddc = voltage->voltage;
+ DRM_DEBUG("Setting: v: %d\n", voltage->voltage);
+ }
+ }
}
void evergreen_pm_prepare(struct radeon_device *rdev)
if (r)
return r;
- rdev->accel_working = false;
+ rdev->accel_working = true;
r = evergreen_startup(rdev);
if (r) {
dev_err(rdev->dev, "disabling GPU acceleration\n");
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+ /* mid sh */
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
/* high sh */
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+ /* mid mh */
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
/* high mh */
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_cm_idx = 0;
/* low sh */
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+ /* mid sh */
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
/* high sh */
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+ /* mid mh */
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
/* high mh */
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+ /* mid sh */
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
/* high sh */
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 1;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+ /* mid mh */
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
/* high mh */
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 1;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 1;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+ /* mid sh */
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
/* high sh */
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 1;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 2;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = 1;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+ /* mid mh */
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
/* high mh */
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 1;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 2;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 2;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+ /* mid sh */
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 2;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 2;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
/* high sh */
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 2;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 3;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+ /* mid mh */
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 2;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
/* high mh */
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 2;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 3;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+ /* mid sh */
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
/* high sh */
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+ /* mid mh */
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
/* high mh */
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = 1;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 1;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+ /* mid sh */
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
/* high sh */
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 1;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 1;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = 2;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = 2;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+ /* low mh */
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 2;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = 2;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
/* high mh */
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 2;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 2;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx =
r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
} else {
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx =
r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx =
r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+ }
+ /* mid sh */
+ if (rdev->flags & RADEON_IS_MOBILITY) {
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx =
+ r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx =
+ r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
+ } else {
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx =
+ r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx =
+ r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
}
/* high sh */
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx =
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx =
r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 2;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
} else {
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx =
r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx =
r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+ }
+ /* mid mh */
+ if (rdev->flags & RADEON_IS_MOBILITY) {
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx =
+ r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx =
+ r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
+ } else {
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx =
+ r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx =
+ r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
}
/* high mh */
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx =
void r600_pm_misc(struct radeon_device *rdev)
{
- int requested_index = rdev->pm.requested_power_state_index;
- struct radeon_power_state *ps = &rdev->pm.power_state[requested_index];
- struct radeon_voltage *voltage = &ps->clock_info[0].voltage;
-
- if ((voltage->type == VOLTAGE_SW) && voltage->voltage)
- radeon_atom_set_voltage(rdev, voltage->voltage);
+ int req_ps_idx = rdev->pm.requested_power_state_index;
+ int req_cm_idx = rdev->pm.requested_clock_mode_index;
+ struct radeon_power_state *ps = &rdev->pm.power_state[req_ps_idx];
+ struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
+ if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
+ if (voltage->voltage != rdev->pm.current_vddc) {
+ radeon_atom_set_voltage(rdev, voltage->voltage);
+ rdev->pm.current_vddc = voltage->voltage;
+ DRM_DEBUG("Setting: v: %d\n", voltage->voltage);
+ }
+ }
}
bool r600_gui_idle(struct radeon_device *rdev)
PM_PROFILE_DEFAULT,
PM_PROFILE_AUTO,
PM_PROFILE_LOW,
+ PM_PROFILE_MID,
PM_PROFILE_HIGH,
};
#define PM_PROFILE_DEFAULT_IDX 0
#define PM_PROFILE_LOW_SH_IDX 1
-#define PM_PROFILE_HIGH_SH_IDX 2
-#define PM_PROFILE_LOW_MH_IDX 3
-#define PM_PROFILE_HIGH_MH_IDX 4
-#define PM_PROFILE_MAX 5
+#define PM_PROFILE_MID_SH_IDX 2
+#define PM_PROFILE_HIGH_SH_IDX 3
+#define PM_PROFILE_LOW_MH_IDX 4
+#define PM_PROFILE_MID_MH_IDX 5
+#define PM_PROFILE_HIGH_MH_IDX 6
+#define PM_PROFILE_MAX 7
struct radeon_pm_profile {
int dpms_off_ps_idx;
int default_power_state_index;
u32 current_sclk;
u32 current_mclk;
+ u32 current_vddc;
struct radeon_i2c_chan *i2c_bus;
/* selected pm method */
enum radeon_pm_method pm_method;
/* skip invalid modes */
if (rdev->pm.power_state[state_index].clock_info[mode_index].sclk == 0)
continue;
- rdev->pm.power_state[state_index].clock_info[mode_index].voltage.type =
- VOLTAGE_SW;
- rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage =
- clock_info->usVDDC;
+ /* voltage works differently on IGPs */
mode_index++;
} else if (ASIC_IS_DCE4(rdev)) {
struct _ATOM_PPLIB_EVERGREEN_CLOCK_INFO *clock_info =
rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
rdev->pm.current_clock_mode_index = 0;
+ rdev->pm.current_vddc = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.voltage;
}
void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable)
combios_setup_i2c_bus(rdev, RADEON_GPIO_CRT2_DDC);
break;
default:
+ ddc_i2c.valid = false;
break;
}
if (RBIOS8(tv_info + 6) == 'T') {
if (radeon_apply_legacy_tv_quirks(dev)) {
hpd.hpd = RADEON_HPD_NONE;
+ ddc_i2c.valid = false;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id
(dev,
rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk;
rdev->pm.power_state[state_index].default_clock_mode = &rdev->pm.power_state[state_index].clock_info[0];
if ((state_index > 0) &&
- (rdev->pm.power_state[0].clock_info[0].voltage.type = VOLTAGE_GPIO))
+ (rdev->pm.power_state[0].clock_info[0].voltage.type == VOLTAGE_GPIO))
rdev->pm.power_state[state_index].clock_info[0].voltage =
rdev->pm.power_state[0].clock_info[0].voltage;
else
"eDP",
};
-static const char *hpd_names[7] = {
- "NONE",
+static const char *hpd_names[6] = {
"HPD1",
"HPD2",
"HPD3",
* - 2.2.0 - add r6xx/r7xx const buffer support
* - 2.3.0 - add MSPOS + 3D texture + r500 VAP regs
* - 2.4.0 - add crtc id query
+ * - 2.5.0 - add get accel 2 to work around ddx breakage for evergreen
*/
#define KMS_DRIVER_MAJOR 2
-#define KMS_DRIVER_MINOR 4
+#define KMS_DRIVER_MINOR 5
#define KMS_DRIVER_PATCHLEVEL 0
int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
int radeon_driver_unload_kms(struct drm_device *dev);
{
struct radeon_fbdev *rfbdev;
int bpp_sel = 32;
+ int ret;
/* select 8 bpp console on RN50 or 16MB cards */
if (ASIC_IS_RN50(rdev) || rdev->mc.real_vram_size <= (32*1024*1024))
rdev->mode_info.rfbdev = rfbdev;
rfbdev->helper.funcs = &radeon_fb_helper_funcs;
- drm_fb_helper_init(rdev->ddev, &rfbdev->helper,
- rdev->num_crtc,
- RADEONFB_CONN_LIMIT);
+ ret = drm_fb_helper_init(rdev->ddev, &rfbdev->helper,
+ rdev->num_crtc,
+ RADEONFB_CONN_LIMIT);
+ if (ret) {
+ kfree(rfbdev);
+ return ret;
+ }
+
drm_fb_helper_single_add_all_connectors(&rfbdev->helper);
drm_fb_helper_initial_config(&rfbdev->helper, bpp_sel);
return 0;
value = rdev->num_z_pipes;
break;
case RADEON_INFO_ACCEL_WORKING:
- value = rdev->accel_working;
+ /* xf86-video-ati 6.13.0 relies on this being false for evergreen */
+ if ((rdev->family >= CHIP_CEDAR) && (rdev->family <= CHIP_HEMLOCK))
+ value = false;
+ else
+ value = rdev->accel_working;
break;
case RADEON_INFO_CRTC_FROM_ID:
for (i = 0, found = 0; i < rdev->num_crtc; i++) {
return -EINVAL;
}
break;
+ case RADEON_INFO_ACCEL_WORKING2:
+ value = rdev->accel_working;
+ break;
default:
DRM_DEBUG("Invalid request %d\n", info->request);
return -EINVAL;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_tv_dac *tv_dac = radeon_encoder->enc_priv;
bool color = true;
+ struct drm_crtc *crtc;
+
+ /* find out if crtc2 is in use or if this encoder is using it */
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ if ((radeon_crtc->crtc_id == 1) && crtc->enabled) {
+ if (encoder->crtc != crtc) {
+ return connector_status_disconnected;
+ }
+ }
+ }
if (connector->connector_type == DRM_MODE_CONNECTOR_SVIDEO ||
connector->connector_type == DRM_MODE_CONNECTOR_Composite ||
#define RADEON_WAIT_VBLANK_TIMEOUT 200
#define RADEON_WAIT_IDLE_TIMEOUT 200
+static const char *radeon_pm_state_type_name[5] = {
+ "Default",
+ "Powersave",
+ "Battery",
+ "Balanced",
+ "Performance",
+};
+
static void radeon_dynpm_idle_work_handler(struct work_struct *work);
static int radeon_debugfs_pm_init(struct radeon_device *rdev);
static bool radeon_pm_in_vbl(struct radeon_device *rdev);
rdev->pm.profile_index = PM_PROFILE_HIGH_SH_IDX;
} else {
if (rdev->pm.active_crtc_count > 1)
- rdev->pm.profile_index = PM_PROFILE_LOW_MH_IDX;
+ rdev->pm.profile_index = PM_PROFILE_MID_MH_IDX;
else
- rdev->pm.profile_index = PM_PROFILE_LOW_SH_IDX;
+ rdev->pm.profile_index = PM_PROFILE_MID_SH_IDX;
}
break;
case PM_PROFILE_LOW:
else
rdev->pm.profile_index = PM_PROFILE_LOW_SH_IDX;
break;
+ case PM_PROFILE_MID:
+ if (rdev->pm.active_crtc_count > 1)
+ rdev->pm.profile_index = PM_PROFILE_MID_MH_IDX;
+ else
+ rdev->pm.profile_index = PM_PROFILE_MID_SH_IDX;
+ break;
case PM_PROFILE_HIGH:
if (rdev->pm.active_crtc_count > 1)
rdev->pm.profile_index = PM_PROFILE_HIGH_MH_IDX;
if (bo->tbo.mem.mem_type == TTM_PL_VRAM)
ttm_bo_unmap_virtual(&bo->tbo);
}
-
- if (rdev->gart.table.vram.robj)
- ttm_bo_unmap_virtual(&rdev->gart.table.vram.robj->tbo);
-
- if (rdev->stollen_vga_memory)
- ttm_bo_unmap_virtual(&rdev->stollen_vga_memory->tbo);
-
- if (rdev->r600_blit.shader_obj)
- ttm_bo_unmap_virtual(&rdev->r600_blit.shader_obj->tbo);
}
static void radeon_sync_with_vblank(struct radeon_device *rdev)
mutex_unlock(&rdev->ddev->struct_mutex);
}
+static void radeon_pm_print_states(struct radeon_device *rdev)
+{
+ int i, j;
+ struct radeon_power_state *power_state;
+ struct radeon_pm_clock_info *clock_info;
+
+ DRM_DEBUG("%d Power State(s)\n", rdev->pm.num_power_states);
+ for (i = 0; i < rdev->pm.num_power_states; i++) {
+ power_state = &rdev->pm.power_state[i];
+ DRM_DEBUG("State %d: %s\n", i,
+ radeon_pm_state_type_name[power_state->type]);
+ if (i == rdev->pm.default_power_state_index)
+ DRM_DEBUG("\tDefault");
+ if ((rdev->flags & RADEON_IS_PCIE) && !(rdev->flags & RADEON_IS_IGP))
+ DRM_DEBUG("\t%d PCIE Lanes\n", power_state->pcie_lanes);
+ if (power_state->flags & RADEON_PM_STATE_SINGLE_DISPLAY_ONLY)
+ DRM_DEBUG("\tSingle display only\n");
+ DRM_DEBUG("\t%d Clock Mode(s)\n", power_state->num_clock_modes);
+ for (j = 0; j < power_state->num_clock_modes; j++) {
+ clock_info = &(power_state->clock_info[j]);
+ if (rdev->flags & RADEON_IS_IGP)
+ DRM_DEBUG("\t\t%d e: %d%s\n",
+ j,
+ clock_info->sclk * 10,
+ clock_info->flags & RADEON_PM_MODE_NO_DISPLAY ? "\tNo display only" : "");
+ else
+ DRM_DEBUG("\t\t%d e: %d\tm: %d\tv: %d%s\n",
+ j,
+ clock_info->sclk * 10,
+ clock_info->mclk * 10,
+ clock_info->voltage.voltage,
+ clock_info->flags & RADEON_PM_MODE_NO_DISPLAY ? "\tNo display only" : "");
+ }
+ }
+}
+
static ssize_t radeon_get_pm_profile(struct device *dev,
struct device_attribute *attr,
char *buf)
rdev->pm.profile = PM_PROFILE_AUTO;
else if (strncmp("low", buf, strlen("low")) == 0)
rdev->pm.profile = PM_PROFILE_LOW;
+ else if (strncmp("mid", buf, strlen("mid")) == 0)
+ rdev->pm.profile = PM_PROFILE_MID;
else if (strncmp("high", buf, strlen("high")) == 0)
rdev->pm.profile = PM_PROFILE_HIGH;
else {
{
mutex_lock(&rdev->pm.mutex);
cancel_delayed_work(&rdev->pm.dynpm_idle_work);
- rdev->pm.current_power_state_index = -1;
- rdev->pm.current_clock_mode_index = -1;
- rdev->pm.current_sclk = 0;
- rdev->pm.current_mclk = 0;
mutex_unlock(&rdev->pm.mutex);
}
void radeon_pm_resume(struct radeon_device *rdev)
{
+ /* asic init will reset the default power state */
+ mutex_lock(&rdev->pm.mutex);
+ rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
+ rdev->pm.current_clock_mode_index = 0;
+ rdev->pm.current_sclk = rdev->clock.default_sclk;
+ rdev->pm.current_mclk = rdev->clock.default_mclk;
+ rdev->pm.current_vddc = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.voltage;
+ mutex_unlock(&rdev->pm.mutex);
radeon_pm_compute_clocks(rdev);
}
int ret;
/* default to profile method */
rdev->pm.pm_method = PM_METHOD_PROFILE;
+ rdev->pm.profile = PM_PROFILE_DEFAULT;
rdev->pm.dynpm_state = DYNPM_STATE_DISABLED;
rdev->pm.dynpm_planned_action = DYNPM_ACTION_NONE;
rdev->pm.dynpm_can_upclock = true;
rdev->pm.dynpm_can_downclock = true;
- rdev->pm.current_sclk = 0;
- rdev->pm.current_mclk = 0;
+ rdev->pm.current_sclk = rdev->clock.default_sclk;
+ rdev->pm.current_mclk = rdev->clock.default_mclk;
if (rdev->bios) {
if (rdev->is_atom_bios)
radeon_atombios_get_power_modes(rdev);
else
radeon_combios_get_power_modes(rdev);
+ radeon_pm_print_states(rdev);
radeon_pm_init_profile(rdev);
- rdev->pm.current_power_state_index = -1;
- rdev->pm.current_clock_mode_index = -1;
}
if (rdev->pm.num_power_states > 1) {
- if (rdev->pm.pm_method == PM_METHOD_PROFILE) {
- mutex_lock(&rdev->pm.mutex);
- rdev->pm.profile = PM_PROFILE_DEFAULT;
- radeon_pm_update_profile(rdev);
- radeon_pm_set_clocks(rdev);
- mutex_unlock(&rdev->pm.mutex);
- }
-
/* where's the best place to put these? */
ret = device_create_file(rdev->dev, &dev_attr_power_profile);
if (ret)
seq_printf(m, "default memory clock: %u0 kHz\n", rdev->clock.default_mclk);
if (rdev->asic->get_memory_clock)
seq_printf(m, "current memory clock: %u0 kHz\n", radeon_get_memory_clock(rdev));
+ if (rdev->pm.current_vddc)
+ seq_printf(m, "voltage: %u mV\n", rdev->pm.current_vddc);
if (rdev->asic->get_pcie_lanes)
seq_printf(m, "PCIE lanes: %d\n", radeon_get_pcie_lanes(rdev));
void rv770_pm_misc(struct radeon_device *rdev)
{
- int requested_index = rdev->pm.requested_power_state_index;
- struct radeon_power_state *ps = &rdev->pm.power_state[requested_index];
- struct radeon_voltage *voltage = &ps->clock_info[0].voltage;
-
- if ((voltage->type == VOLTAGE_SW) && voltage->voltage)
- radeon_atom_set_voltage(rdev, voltage->voltage);
+ int req_ps_idx = rdev->pm.requested_power_state_index;
+ int req_cm_idx = rdev->pm.requested_clock_mode_index;
+ struct radeon_power_state *ps = &rdev->pm.power_state[req_ps_idx];
+ struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
+
+ if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
+ if (voltage->voltage != rdev->pm.current_vddc) {
+ radeon_atom_set_voltage(rdev, voltage->voltage);
+ rdev->pm.current_vddc = voltage->voltage;
+ DRM_DEBUG("Setting: v: %d\n", voltage->voltage);
+ }
+ }
}
/*
ret = copy_from_user(cmd, user_cmd, arg->command_size);
if (unlikely(ret != 0)) {
+ ret = -EFAULT;
DRM_ERROR("Failed copying commands.\n");
goto out_commit;
}
ret = copy_from_user(srf->sizes, user_sizes,
srf->num_sizes * sizeof(*srf->sizes));
- if (unlikely(ret != 0))
+ if (unlikely(ret != 0)) {
+ ret = -EFAULT;
goto out_err1;
+ }
if (srf->scanout &&
srf->num_sizes == 1 &&
if (user_sizes)
ret = copy_to_user(user_sizes, srf->sizes,
srf->num_sizes * sizeof(*srf->sizes));
- if (unlikely(ret != 0))
+ if (unlikely(ret != 0)) {
DRM_ERROR("copy_to_user failed %p %u\n",
user_sizes, srf->num_sizes);
+ ret = -EFAULT;
+ }
out_bad_resource:
out_no_reference:
ttm_base_object_unref(&base);
.llseek = no_llseek,
.read = hp_sdc_rtc_read,
.poll = hp_sdc_rtc_poll,
- .unlocked_ioctl = hp_sdc_rtc_ioctl,
+ .unlocked_ioctl = hp_sdc_rtc_unlocked_ioctl,
.open = hp_sdc_rtc_open,
.fasync = hp_sdc_rtc_fasync,
};
config MMC_MSM7X00A
tristate "Qualcomm MSM 7X00A SDCC Controller Support"
- depends on MMC && ARCH_MSM
+ depends on MMC && ARCH_MSM && !ARCH_MSM7X30
help
This provides support for the SD/MMC cell found in the
MSM 7X00A controllers from Qualcomm.
if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
return -EINVAL;
- ops.oobbuf = kmalloc(length, GFP_KERNEL);
- if (!ops.oobbuf)
- return -ENOMEM;
-
- if (copy_from_user(ops.oobbuf, ptr, length)) {
- kfree(ops.oobbuf);
- return -EFAULT;
- }
+ ops.oobbuf = memdup_user(ptr, length);
+ if (IS_ERR(ops.oobbuf))
+ return PTR_ERR(ops.oobbuf);
start &= ~((uint64_t)mtd->oobsize - 1);
ret = mtd->write_oob(mtd, start, &ops);
-menuconfig MTD_NAND
- tristate "NAND Device Support"
- depends on MTD
- select MTD_NAND_IDS
- select MTD_NAND_ECC
- help
- This enables support for accessing all type of NAND flash
- devices. For further information see
- <http://www.linux-mtd.infradead.org/doc/nand.html>.
-
config MTD_NAND_ECC
tristate
Software ECC according to the Smart Media Specification.
The original Linux implementation had byte 0 and 1 swapped.
+
+menuconfig MTD_NAND
+ tristate "NAND Device Support"
+ depends on MTD
+ select MTD_NAND_IDS
+ select MTD_NAND_ECC
+ help
+ This enables support for accessing all type of NAND flash
+ devices. For further information see
+ <http://www.linux-mtd.infradead.org/doc/nand.html>.
+
if MTD_NAND
config MTD_NAND_VERIFY_WRITE
if (dev->phys_dma_addr && dev->phys_dma_addr != dev->phys_bounce_buffer)
pci_unmap_single(dev->pci_dev, dev->phys_dma_addr, R852_DMA_LEN,
dev->dma_dir ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE);
- complete(&dev->dma_done);
}
/*
/* Set dma direction */
dev->dma_dir = do_read;
dev->dma_stage = 1;
+ INIT_COMPLETION(dev->dma_done);
dbg_verbose("doing dma %s ", do_read ? "read" : "write");
if (dev->card_unstable)
return 0;
+ if (dev->dma_error) {
+ dev->dma_error = 0;
+ return -1;
+ }
+
r852_write_reg(dev, R852_CTL, dev->ctlreg | R852_CTL_ECC_ACCESS);
ecc_reg = r852_read_reg_dword(dev, R852_DATALINE);
r852_write_reg(dev, R852_CTL, dev->ctlreg);
container_of(work, struct r852_device, card_detect_work.work);
r852_card_update_present(dev);
+ r852_update_card_detect(dev);
dev->card_unstable = 0;
/* False alarm */
else
r852_unregister_nand_device(dev);
exit:
- /* Update detection logic */
r852_update_card_detect(dev);
}
if (dma_status & R852_DMA_IRQ_ERROR) {
dbg("recieved dma error IRQ");
r852_dma_done(dev, -EIO);
+ complete(&dev->dma_done);
goto out;
}
r852_dma_enable(dev);
/* Operation done */
- if (dev->dma_stage == 3)
+ if (dev->dma_stage == 3) {
r852_dma_done(dev, 0);
+ complete(&dev->dma_done);
+ }
goto out;
}
r852_dma_test(dev);
+ dev->irq = pci_dev->irq;
+ spin_lock_init(&dev->irqlock);
+
+ dev->card_detected = 0;
+ r852_card_update_present(dev);
+
/*register irq handler*/
error = -ENODEV;
if (request_irq(pci_dev->irq, &r852_irq, IRQF_SHARED,
DRV_NAME, dev))
goto error10;
- dev->irq = pci_dev->irq;
- spin_lock_init(&dev->irqlock);
-
/* kick initial present test */
- dev->card_detected = 0;
- r852_card_update_present(dev);
queue_delayed_work(dev->card_workqueue,
&dev->card_detect_work, 0);
dev->card_detected ? "added" : "removed");
queue_delayed_work(dev->card_workqueue,
- &dev->card_detect_work, 1000);
+ &dev->card_detect_work, msecs_to_jiffies(1000));
return 0;
}
}
/* if unknown chip, assume array element #0, original RTL-8139 in this case */
+ i = 0;
dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n");
dev_dbg(&pdev->dev, "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
tp->chipset = 0;
break;
udelay(25);
}
+ /*
+ * Some configurations require a small delay even after the write
+ * completed indication or the next write might fail.
+ */
+ udelay(25);
}
static int mdio_read(void __iomem *ioaddr, int reg_addr)
return 2;
}
- if (size > ETH_FRAME_LEN) {
+ if (size > dev->net->mtu + ETH_HLEN) {
netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n",
size);
return 0;
static int __devinit ath5k_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id);
static void __devexit ath5k_pci_remove(struct pci_dev *pdev);
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int ath5k_pci_suspend(struct device *dev);
static int ath5k_pci_resume(struct device *dev);
#define ATH5K_PM_OPS (&ath5k_pm_ops)
#else
#define ATH5K_PM_OPS NULL
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_SLEEP */
static struct pci_driver ath5k_pci_driver = {
.name = KBUILD_MODNAME,
ieee80211_free_hw(hw);
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int ath5k_pci_suspend(struct device *dev)
{
struct ieee80211_hw *hw = pci_get_drvdata(to_pci_dev(dev));
ath5k_led_enable(sc);
return 0;
}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_SLEEP */
/***********************\
if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
if (*new_flags & FIF_PROMISC_IN_BSS) {
- rfilt |= AR5K_RX_FILTER_PROM;
__set_bit(ATH_STAT_PROMISC, sc->status);
} else {
__clear_bit(ATH_STAT_PROMISC, sc->status);
}
}
+ if (test_bit(ATH_STAT_PROMISC, sc->status))
+ rfilt |= AR5K_RX_FILTER_PROM;
+
/* Note, AR5K_RX_FILTER_MCAST is already enabled */
if (*new_flags & FIF_ALLMULTI) {
mfilt[0] = ~0;
u8 def_ant, tx_ant, ee_mode;
u32 sta_id1 = 0;
+ /* if channel is not initialized yet we can't set the antennas
+ * so just store the mode. it will be set on the next reset */
+ if (channel == NULL) {
+ ah->ah_ant_mode = ant_mode;
+ return;
+ }
+
def_ant = ah->ah_def_ant;
ATH5K_TRACE(ah->ah_sc);
int events = 0;
u16 ev;
- /* Detect early interrupt before driver is fully configued */
- if (!dev->base_addr) {
- if (net_ratelimit()) {
- printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n",
- dev->name);
- }
- return IRQ_HANDLED;
- }
-
iface = netdev_priv(dev);
local = iface->local;
.isr = iwl_isr_legacy,
.config_ap = iwl3945_config_ap,
.manage_ibss_station = iwl3945_manage_ibss_station,
+ .recover_from_tx_stall = iwl_bg_monitor_recover,
.check_plcp_health = iwl3945_good_plcp_health,
.debugfs_ops = {
struct iwl_scan_channel *scan_ch)
{
const struct ieee80211_supported_band *sband;
- const struct iwl_channel_info *ch_info;
u16 passive_dwell = 0;
u16 active_dwell = 0;
- int i, added = 0;
+ int added = 0;
u16 channel = 0;
sband = iwl_get_hw_mode(priv, band);
if (passive_dwell <= active_dwell)
passive_dwell = active_dwell + 1;
- /* only scan single channel, good enough to reset the RF */
- /* pick the first valid not in-use channel */
- if (band == IEEE80211_BAND_5GHZ) {
- for (i = 14; i < priv->channel_count; i++) {
- if (priv->channel_info[i].channel !=
- le16_to_cpu(priv->staging_rxon.channel)) {
- channel = priv->channel_info[i].channel;
- ch_info = iwl_get_channel_info(priv,
- band, channel);
- if (is_channel_valid(ch_info))
- break;
- }
- }
- } else {
- for (i = 0; i < 14; i++) {
- if (priv->channel_info[i].channel !=
- le16_to_cpu(priv->staging_rxon.channel)) {
- channel =
- priv->channel_info[i].channel;
- ch_info = iwl_get_channel_info(priv,
- band, channel);
- if (is_channel_valid(ch_info))
- break;
- }
- }
- }
+ channel = iwl_get_single_channel_number(priv, band);
if (channel) {
scan_ch->channel = cpu_to_le16(channel);
scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
struct ieee80211_sta *sta;
struct iwl_station_priv *sta_priv;
+ rcu_read_lock();
sta = ieee80211_find_sta(priv->vif, hdr->addr1);
if (sta) {
sta_priv = (void *)sta->drv_priv;
atomic_dec_return(&sta_priv->pending_frames) == 0)
ieee80211_sta_block_awake(priv->hw, sta, false);
}
+ rcu_read_unlock();
ieee80211_tx_status_irqsafe(priv->hw, skb);
}
}
+/*****************************************************************************
+ *
+ * sysfs attributes
+ *
+ *****************************************************************************/
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+
+/*
+ * The following adds a new attribute to the sysfs representation
+ * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
+ * used for controlling the debug level.
+ *
+ * See the level definitions in iwl for details.
+ *
+ * The debug_level being managed using sysfs below is a per device debug
+ * level that is used instead of the global debug level if it (the per
+ * device debug level) is set.
+ */
+static ssize_t show_debug_level(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct iwl_priv *priv = dev_get_drvdata(d);
+ return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
+}
+static ssize_t store_debug_level(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct iwl_priv *priv = dev_get_drvdata(d);
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 0, &val);
+ if (ret)
+ IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf);
+ else {
+ priv->debug_level = val;
+ if (iwl_alloc_traffic_mem(priv))
+ IWL_ERR(priv,
+ "Not enough memory to generate traffic log\n");
+ }
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
+ show_debug_level, store_debug_level);
+
+
+#endif /* CONFIG_IWLWIFI_DEBUG */
+
+
+static ssize_t show_temperature(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct iwl_priv *priv = dev_get_drvdata(d);
+
+ if (!iwl_is_alive(priv))
+ return -EAGAIN;
+
+ return sprintf(buf, "%d\n", priv->temperature);
+}
+
+static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
+
+static ssize_t show_tx_power(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct iwl_priv *priv = dev_get_drvdata(d);
+
+ if (!iwl_is_ready_rf(priv))
+ return sprintf(buf, "off\n");
+ else
+ return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
+}
+
+static ssize_t store_tx_power(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct iwl_priv *priv = dev_get_drvdata(d);
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ IWL_INFO(priv, "%s is not in decimal form.\n", buf);
+ else {
+ ret = iwl_set_tx_power(priv, val, false);
+ if (ret)
+ IWL_ERR(priv, "failed setting tx power (0x%d).\n",
+ ret);
+ else
+ ret = count;
+ }
+ return ret;
+}
+
+static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
+
+static ssize_t show_rts_ht_protection(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct iwl_priv *priv = dev_get_drvdata(d);
+
+ return sprintf(buf, "%s\n",
+ priv->cfg->use_rts_for_ht ? "RTS/CTS" : "CTS-to-self");
+}
+
+static ssize_t store_rts_ht_protection(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct iwl_priv *priv = dev_get_drvdata(d);
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ IWL_INFO(priv, "Input is not in decimal form.\n");
+ else {
+ if (!iwl_is_associated(priv))
+ priv->cfg->use_rts_for_ht = val ? true : false;
+ else
+ IWL_ERR(priv, "Sta associated with AP - "
+ "Change protection mechanism is not allowed\n");
+ ret = count;
+ }
+ return ret;
+}
+
+static DEVICE_ATTR(rts_ht_protection, S_IWUSR | S_IRUGO,
+ show_rts_ht_protection, store_rts_ht_protection);
+
+
+static struct attribute *iwl_sysfs_entries[] = {
+ &dev_attr_temperature.attr,
+ &dev_attr_tx_power.attr,
+ &dev_attr_rts_ht_protection.attr,
+#ifdef CONFIG_IWLWIFI_DEBUG
+ &dev_attr_debug_level.attr,
+#endif
+ NULL
+};
+
+static struct attribute_group iwl_attribute_group = {
+ .name = NULL, /* put in device directory */
+ .attrs = iwl_sysfs_entries,
+};
+
/******************************************************************************
*
* uCode download functions
if (err)
IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
+ err = sysfs_create_group(&priv->pci_dev->dev.kobj,
+ &iwl_attribute_group);
+ if (err) {
+ IWL_ERR(priv, "failed to create sysfs device attributes\n");
+ goto out_unbind;
+ }
+
/* We have our copies now, allow OS release its copies */
release_firmware(ucode_raw);
complete(&priv->_agn.firmware_loading_complete);
return 0;
}
-/*****************************************************************************
- *
- * sysfs attributes
- *
- *****************************************************************************/
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-
-/*
- * The following adds a new attribute to the sysfs representation
- * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
- * used for controlling the debug level.
- *
- * See the level definitions in iwl for details.
- *
- * The debug_level being managed using sysfs below is a per device debug
- * level that is used instead of the global debug level if it (the per
- * device debug level) is set.
- */
-static ssize_t show_debug_level(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
-}
-static ssize_t store_debug_level(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- unsigned long val;
- int ret;
-
- ret = strict_strtoul(buf, 0, &val);
- if (ret)
- IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf);
- else {
- priv->debug_level = val;
- if (iwl_alloc_traffic_mem(priv))
- IWL_ERR(priv,
- "Not enough memory to generate traffic log\n");
- }
- return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
- show_debug_level, store_debug_level);
-
-
-#endif /* CONFIG_IWLWIFI_DEBUG */
-
-
-static ssize_t show_temperature(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- return sprintf(buf, "%d\n", priv->temperature);
-}
-
-static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
-
-static ssize_t show_tx_power(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
-
- if (!iwl_is_ready_rf(priv))
- return sprintf(buf, "off\n");
- else
- return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
-}
-
-static ssize_t store_tx_power(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- unsigned long val;
- int ret;
-
- ret = strict_strtoul(buf, 10, &val);
- if (ret)
- IWL_INFO(priv, "%s is not in decimal form.\n", buf);
- else {
- ret = iwl_set_tx_power(priv, val, false);
- if (ret)
- IWL_ERR(priv, "failed setting tx power (0x%d).\n",
- ret);
- else
- ret = count;
- }
- return ret;
-}
-
-static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
-
-static ssize_t show_rts_ht_protection(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
-
- return sprintf(buf, "%s\n",
- priv->cfg->use_rts_for_ht ? "RTS/CTS" : "CTS-to-self");
-}
-
-static ssize_t store_rts_ht_protection(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- unsigned long val;
- int ret;
-
- ret = strict_strtoul(buf, 10, &val);
- if (ret)
- IWL_INFO(priv, "Input is not in decimal form.\n");
- else {
- if (!iwl_is_associated(priv))
- priv->cfg->use_rts_for_ht = val ? true : false;
- else
- IWL_ERR(priv, "Sta associated with AP - "
- "Change protection mechanism is not allowed\n");
- ret = count;
- }
- return ret;
-}
-
-static DEVICE_ATTR(rts_ht_protection, S_IWUSR | S_IRUGO,
- show_rts_ht_protection, store_rts_ht_protection);
-
-
/*****************************************************************************
*
* driver setup and teardown
kfree(priv->scan_cmd);
}
-static struct attribute *iwl_sysfs_entries[] = {
- &dev_attr_temperature.attr,
- &dev_attr_tx_power.attr,
- &dev_attr_rts_ht_protection.attr,
-#ifdef CONFIG_IWLWIFI_DEBUG
- &dev_attr_debug_level.attr,
-#endif
- NULL
-};
-
-static struct attribute_group iwl_attribute_group = {
- .name = NULL, /* put in device directory */
- .attrs = iwl_sysfs_entries,
-};
-
static struct ieee80211_ops iwl_hw_ops = {
.tx = iwl_mac_tx,
.start = iwl_mac_start,
IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
goto out_disable_msi;
}
- err = sysfs_create_group(&pdev->dev.kobj, &iwl_attribute_group);
- if (err) {
- IWL_ERR(priv, "failed to create sysfs device attributes\n");
- goto out_free_irq;
- }
iwl_setup_deferred_work(priv);
iwl_setup_rx_handlers(priv);
err = iwl_request_firmware(priv, true);
if (err)
- goto out_remove_sysfs;
+ goto out_destroy_workqueue;
return 0;
- out_remove_sysfs:
+ out_destroy_workqueue:
destroy_workqueue(priv->workqueue);
priv->workqueue = NULL;
- sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
- out_free_irq:
free_irq(priv->pci_dev->irq, priv);
iwl_free_isr_ict(priv);
out_disable_msi:
}
EXPORT_SYMBOL(iwl_set_rxon_chain);
+/* Return valid channel */
+u8 iwl_get_single_channel_number(struct iwl_priv *priv,
+ enum ieee80211_band band)
+{
+ const struct iwl_channel_info *ch_info;
+ int i;
+ u8 channel = 0;
+
+ /* only scan single channel, good enough to reset the RF */
+ /* pick the first valid not in-use channel */
+ if (band == IEEE80211_BAND_5GHZ) {
+ for (i = 14; i < priv->channel_count; i++) {
+ if (priv->channel_info[i].channel !=
+ le16_to_cpu(priv->staging_rxon.channel)) {
+ channel = priv->channel_info[i].channel;
+ ch_info = iwl_get_channel_info(priv,
+ band, channel);
+ if (is_channel_valid(ch_info))
+ break;
+ }
+ }
+ } else {
+ for (i = 0; i < 14; i++) {
+ if (priv->channel_info[i].channel !=
+ le16_to_cpu(priv->staging_rxon.channel)) {
+ channel =
+ priv->channel_info[i].channel;
+ ch_info = iwl_get_channel_info(priv,
+ band, channel);
+ if (is_channel_valid(ch_info))
+ break;
+ }
+ }
+ }
+
+ return channel;
+}
+EXPORT_SYMBOL(iwl_get_single_channel_number);
+
/**
* iwl_set_rxon_channel - Set the phymode and channel values in staging RXON
* @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
int iwl_full_rxon_required(struct iwl_priv *priv);
void iwl_set_rxon_chain(struct iwl_priv *priv);
int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch);
+u8 iwl_get_single_channel_number(struct iwl_priv *priv,
+ enum ieee80211_band band);
void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf);
u8 iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
struct ieee80211_sta_ht_cap *sta_ht_inf);
#endif
}
+static int iwl3945_get_single_channel_for_scan(struct iwl_priv *priv,
+ struct ieee80211_vif *vif,
+ enum ieee80211_band band,
+ struct iwl3945_scan_channel *scan_ch)
+{
+ const struct ieee80211_supported_band *sband;
+ u16 passive_dwell = 0;
+ u16 active_dwell = 0;
+ int added = 0;
+ u8 channel = 0;
+
+ sband = iwl_get_hw_mode(priv, band);
+ if (!sband) {
+ IWL_ERR(priv, "invalid band\n");
+ return added;
+ }
+
+ active_dwell = iwl_get_active_dwell_time(priv, band, 0);
+ passive_dwell = iwl_get_passive_dwell_time(priv, band, vif);
+
+ if (passive_dwell <= active_dwell)
+ passive_dwell = active_dwell + 1;
+
+
+ channel = iwl_get_single_channel_number(priv, band);
+
+ if (channel) {
+ scan_ch->channel = channel;
+ scan_ch->type = 0; /* passive */
+ scan_ch->active_dwell = cpu_to_le16(active_dwell);
+ scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+ /* Set txpower levels to defaults */
+ scan_ch->tpc.dsp_atten = 110;
+ if (band == IEEE80211_BAND_5GHZ)
+ scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
+ else
+ scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
+ added++;
+ } else
+ IWL_ERR(priv, "no valid channel found\n");
+ return added;
+}
+
static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
enum ieee80211_band band,
u8 is_active, u8 n_probes,
/* select Rx antennas */
scan->flags |= iwl3945_get_antenna_flags(priv);
- scan->channel_count =
- iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
- (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
+ if (priv->is_internal_short_scan) {
+ scan->channel_count =
+ iwl3945_get_single_channel_for_scan(priv, vif, band,
+ (void *)&scan->data[le16_to_cpu(
+ scan->tx_cmd.len)]);
+ } else {
+ scan->channel_count =
+ iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
+ (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
+ }
if (scan->channel_count == 0) {
IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
{USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */
{USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */
{USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */
+ {USB_DEVICE(0x413c, 0x5513)}, /* Dell WLA3310 USB Wireless Adapter */
{USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */
{USB_DEVICE(0x413c, 0x8104)}, /* Cohiba Proto board */
{}
sdio_disable_func(func);
release:
sdio_release_host(func);
+ wl1251_free_hw(wl);
return ret;
}
conf5 &= ~(1 << 24); /* Clear bit 24 */
switch (pdev->device) {
- case PCI_DEVICE_ID_JMICRON_JMB360:
+ case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */
+ case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */
/* The controller should be in single function ahci mode */
conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */
break;
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
* size_t size;
*
* size = itcw_calc_size(1, 2, 0);
- * buffer = kmalloc(size, GFP_DMA);
+ * buffer = kmalloc(size, GFP_KERNEL | GFP_DMA);
* if (!buffer)
* return -ENOMEM;
* itcw = itcw_init(buffer, size, ITCW_OP_READ, 1, 2, 0);
};
static struct miscdevice vhost_net_misc = {
- VHOST_NET_MINOR,
+ MISC_DYNAMIC_MINOR,
"vhost-net",
&vhost_net_fops,
};
struct wm8350 *wm8350 = platform_get_drvdata(pdev);
if (!wm8350) {
- dev_err(wm8350->dev, "No driver data supplied\n");
+ pr_err("No driver data supplied\n");
return -ENODEV;
}
if (inode->i_mode != mode) {
struct iattr attr;
- attr.ia_valid = ATTR_MODE;
+ attr.ia_valid = ATTR_MODE | ATTR_CTIME;
attr.ia_mode = mode;
+ attr.ia_ctime = CURRENT_TIME_SEC;
rc = jffs2_do_setattr(inode, &attr);
if (rc < 0)
return rc;
dir_i->i_mtime = dir_i->i_ctime = ITIME(je32_to_cpu(ri->ctime));
jffs2_free_raw_inode(ri);
- d_instantiate(dentry, inode);
D1(printk(KERN_DEBUG "jffs2_create: Created ino #%lu with mode %o, nlink %d(%d). nrpages %ld\n",
inode->i_ino, inode->i_mode, inode->i_nlink,
f->inocache->pino_nlink, inode->i_mapping->nrpages));
+
+ d_instantiate(dentry, inode);
+ unlock_new_inode(inode);
return 0;
fail:
make_bad_inode(inode);
+ unlock_new_inode(inode);
iput(inode);
jffs2_free_raw_inode(ri);
return ret;
/* Eeek. Wave bye bye */
mutex_unlock(&f->sem);
jffs2_complete_reservation(c);
- jffs2_clear_inode(inode);
- return PTR_ERR(fn);
+ ret = PTR_ERR(fn);
+ goto fail;
}
/* We use f->target field to store the target path. */
printk(KERN_WARNING "Can't allocate %d bytes of memory\n", targetlen + 1);
mutex_unlock(&f->sem);
jffs2_complete_reservation(c);
- jffs2_clear_inode(inode);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto fail;
}
memcpy(f->target, target, targetlen + 1);
jffs2_complete_reservation(c);
ret = jffs2_init_security(inode, dir_i);
- if (ret) {
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
+
ret = jffs2_init_acl_post(inode);
- if (ret) {
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen,
ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen));
- if (ret) {
- /* Eep. */
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
rd = jffs2_alloc_raw_dirent();
if (!rd) {
/* Argh. Now we treat it like a normal delete */
jffs2_complete_reservation(c);
- jffs2_clear_inode(inode);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto fail;
}
dir_f = JFFS2_INODE_INFO(dir_i);
jffs2_complete_reservation(c);
jffs2_free_raw_dirent(rd);
mutex_unlock(&dir_f->sem);
- jffs2_clear_inode(inode);
- return PTR_ERR(fd);
+ ret = PTR_ERR(fd);
+ goto fail;
}
dir_i->i_mtime = dir_i->i_ctime = ITIME(je32_to_cpu(rd->mctime));
jffs2_complete_reservation(c);
d_instantiate(dentry, inode);
+ unlock_new_inode(inode);
return 0;
+
+ fail:
+ make_bad_inode(inode);
+ unlock_new_inode(inode);
+ iput(inode);
+ return ret;
}
/* Eeek. Wave bye bye */
mutex_unlock(&f->sem);
jffs2_complete_reservation(c);
- jffs2_clear_inode(inode);
- return PTR_ERR(fn);
+ ret = PTR_ERR(fn);
+ goto fail;
}
/* No data here. Only a metadata node, which will be
obsoleted by the first data write
jffs2_complete_reservation(c);
ret = jffs2_init_security(inode, dir_i);
- if (ret) {
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
+
ret = jffs2_init_acl_post(inode);
- if (ret) {
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen,
ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen));
- if (ret) {
- /* Eep. */
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
rd = jffs2_alloc_raw_dirent();
if (!rd) {
/* Argh. Now we treat it like a normal delete */
jffs2_complete_reservation(c);
- jffs2_clear_inode(inode);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto fail;
}
dir_f = JFFS2_INODE_INFO(dir_i);
jffs2_complete_reservation(c);
jffs2_free_raw_dirent(rd);
mutex_unlock(&dir_f->sem);
- jffs2_clear_inode(inode);
- return PTR_ERR(fd);
+ ret = PTR_ERR(fd);
+ goto fail;
}
dir_i->i_mtime = dir_i->i_ctime = ITIME(je32_to_cpu(rd->mctime));
jffs2_complete_reservation(c);
d_instantiate(dentry, inode);
+ unlock_new_inode(inode);
return 0;
+
+ fail:
+ make_bad_inode(inode);
+ unlock_new_inode(inode);
+ iput(inode);
+ return ret;
}
static int jffs2_rmdir (struct inode *dir_i, struct dentry *dentry)
/* Eeek. Wave bye bye */
mutex_unlock(&f->sem);
jffs2_complete_reservation(c);
- jffs2_clear_inode(inode);
- return PTR_ERR(fn);
+ ret = PTR_ERR(fn);
+ goto fail;
}
/* No data here. Only a metadata node, which will be
obsoleted by the first data write
jffs2_complete_reservation(c);
ret = jffs2_init_security(inode, dir_i);
- if (ret) {
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
+
ret = jffs2_init_acl_post(inode);
- if (ret) {
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen,
ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen));
- if (ret) {
- /* Eep. */
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
rd = jffs2_alloc_raw_dirent();
if (!rd) {
/* Argh. Now we treat it like a normal delete */
jffs2_complete_reservation(c);
- jffs2_clear_inode(inode);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto fail;
}
dir_f = JFFS2_INODE_INFO(dir_i);
jffs2_complete_reservation(c);
jffs2_free_raw_dirent(rd);
mutex_unlock(&dir_f->sem);
- jffs2_clear_inode(inode);
- return PTR_ERR(fd);
+ ret = PTR_ERR(fd);
+ goto fail;
}
dir_i->i_mtime = dir_i->i_ctime = ITIME(je32_to_cpu(rd->mctime));
jffs2_complete_reservation(c);
d_instantiate(dentry, inode);
-
+ unlock_new_inode(inode);
return 0;
+
+ fail:
+ make_bad_inode(inode);
+ unlock_new_inode(inode);
+ iput(inode);
+ return ret;
}
static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
inode->i_blocks = 0;
inode->i_size = 0;
- insert_inode_hash(inode);
+ if (insert_inode_locked(inode) < 0) {
+ make_bad_inode(inode);
+ unlock_new_inode(inode);
+ iput(inode);
+ return ERR_PTR(-EINVAL);
+ }
return inode;
}
nfs4_lock_state();
nfs4_release_reclaim();
__nfs4_state_shutdown();
- nfsd4_destroy_callback_queue();
nfs4_unlock_state();
+ nfsd4_destroy_callback_queue();
}
/*
if (size_change)
put_write_access(inode);
if (!err)
- if (EX_ISSYNC(fhp->fh_export))
- write_inode_now(inode, 1);
+ commit_metadata(fhp);
out:
return err;
if (!page_has_buffers(page))
create_empty_buffers(page, 1 << inode->i_blkbits, 0);
-
- /*
- * VM calculation for nr_to_write seems off. Bump it way
- * up, this gets simple streaming writes zippy again.
- * To be reviewed again after Jens' writeback changes.
- */
- wbc->nr_to_write *= 4;
-
/*
* Convert delayed allocate, unwritten or unmapped space
* to real space and flush out to disk.
#define RADEON_INFO_NUM_Z_PIPES 0x02
#define RADEON_INFO_ACCEL_WORKING 0x03
#define RADEON_INFO_CRTC_FROM_ID 0x04
+#define RADEON_INFO_ACCEL_WORKING2 0x05
struct drm_radeon_info {
uint32_t request;
#include <linux/module.h>
#include <linux/major.h>
+/*
+ * These allocations are managed by device@lanana.org. If you use an
+ * entry that is not in assigned your entry may well be moved and
+ * reassigned, or set dynamic if a fixed value is not justified.
+ */
+
#define PSMOUSE_MINOR 1
#define MS_BUSMOUSE_MINOR 2
#define ATIXL_BUSMOUSE_MINOR 3
#define HPET_MINOR 228
#define FUSE_MINOR 229
#define KVM_MINOR 232
-#define VHOST_NET_MINOR 233
#define BTRFS_MINOR 234
#define AUTOFS_MINOR 235
#define MISC_DYNAMIC_MINOR 255
#define PCI_VENDOR_ID_JMICRON 0x197B
#define PCI_DEVICE_ID_JMICRON_JMB360 0x2360
#define PCI_DEVICE_ID_JMICRON_JMB361 0x2361
+#define PCI_DEVICE_ID_JMICRON_JMB362 0x2362
#define PCI_DEVICE_ID_JMICRON_JMB363 0x2363
#define PCI_DEVICE_ID_JMICRON_JMB365 0x2365
#define PCI_DEVICE_ID_JMICRON_JMB366 0x2366
unsigned for_reclaim:1; /* Invoked from the page allocator */
unsigned range_cyclic:1; /* range_start is cyclic */
unsigned more_io:1; /* more io to be dispatched */
- /*
- * write_cache_pages() won't update wbc->nr_to_write and
- * mapping->writeback_index if no_nrwrite_index_update
- * is set. write_cache_pages() may write more than we
- * requested and we want to make sure nr_to_write and
- * writeback_index are updated in a consistent manner
- * so we use a single control to update them
- */
- unsigned no_nrwrite_index_update:1;
};
/*
__field( int, pages_written )
__field( long, pages_skipped )
__field( char, more_io )
- __field( char, no_nrwrite_index_update )
__field( pgoff_t, writeback_index )
),
__entry->pages_written = pages_written;
__entry->pages_skipped = wbc->pages_skipped;
__entry->more_io = wbc->more_io;
- __entry->no_nrwrite_index_update = wbc->no_nrwrite_index_update;
__entry->writeback_index = inode->i_mapping->writeback_index;
),
- TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld more_io %d no_nrwrite_index_update %d writeback_index %lu",
+ TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld more_io %d writeback_index %lu",
jbd2_dev_to_name(__entry->dev),
(unsigned long) __entry->ino, __entry->ret,
__entry->pages_written, __entry->pages_skipped,
__entry->more_io,
- __entry->no_nrwrite_index_update,
(unsigned long) __entry->writeback_index)
);
#define TP_STORE_SIGINFO(__entry, info) \
do { \
- if (info == SEND_SIG_NOINFO) { \
+ if (info == SEND_SIG_NOINFO || \
+ info == SEND_SIG_FORCED) { \
__entry->errno = 0; \
__entry->code = SI_USER; \
} else if (info == SEND_SIG_PRIV) { \
divisor = nsec * frequency;
}
+ if (!divisor)
+ return dividend;
+
return div64_u64(dividend, divisor);
}
static void perf_adjust_period(struct perf_event *event, u64 nsec, u64 count)
{
struct hw_perf_event *hwc = &event->hw;
- u64 period, sample_period;
+ s64 period, sample_period;
s64 delta;
period = perf_calculate_period(event, nsec, count);
pgoff_t done_index;
int cycled;
int range_whole = 0;
- long nr_to_write = wbc->nr_to_write;
pagevec_init(&pvec, 0);
if (wbc->range_cyclic) {
if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
range_whole = 1;
cycled = 1; /* ignore range_cyclic tests */
+
+ /*
+ * If this is a data integrity sync, cap the writeback to the
+ * current end of file. Any extension to the file that occurs
+ * after this is a new write and we don't need to write those
+ * pages out to fulfil our data integrity requirements. If we
+ * try to write them out, we can get stuck in this scan until
+ * the concurrent writer stops adding dirty pages and extending
+ * EOF.
+ */
+ if (wbc->sync_mode == WB_SYNC_ALL &&
+ wbc->range_end == LLONG_MAX) {
+ end = i_size_read(mapping->host) >> PAGE_CACHE_SHIFT;
+ }
}
+
retry:
done_index = index;
while (!done && (index <= end)) {
done = 1;
break;
}
- }
+ }
- if (nr_to_write > 0) {
- nr_to_write--;
- if (nr_to_write == 0 &&
+ if (wbc->nr_to_write > 0) {
+ if (--wbc->nr_to_write == 0 &&
wbc->sync_mode == WB_SYNC_NONE) {
/*
* We stop writing back only if we are
end = writeback_index - 1;
goto retry;
}
- if (!wbc->no_nrwrite_index_update) {
- if (wbc->range_cyclic || (range_whole && nr_to_write > 0))
- mapping->writeback_index = done_index;
- wbc->nr_to_write = nr_to_write;
- }
+ if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
+ mapping->writeback_index = done_index;
return ret;
}
{
struct mr_table *mrt, *next;
- list_for_each_entry_safe(mrt, next, &net->ipv4.mr_tables, list)
+ list_for_each_entry_safe(mrt, next, &net->ipv4.mr_tables, list) {
+ list_del(&mrt->list);
kfree(mrt);
+ }
fib_rules_unregister(net->ipv4.mr_rules_ops);
}
#else
static void ipmr_expire_process(unsigned long arg);
#ifdef CONFIG_IPV6_MROUTE_MULTIPLE_TABLES
-#define ip6mr_for_each_table(mrt, met) \
+#define ip6mr_for_each_table(mrt, net) \
list_for_each_entry_rcu(mrt, &net->ipv6.mr6_tables, list)
static struct mr6_table *ip6mr_get_table(struct net *net, u32 id)
{
struct mr6_table *mrt, *next;
- list_for_each_entry_safe(mrt, next, &net->ipv6.mr6_tables, list)
+ list_for_each_entry_safe(mrt, next, &net->ipv6.mr6_tables, list) {
+ list_del(&mrt->list);
ip6mr_free_table(mrt);
+ }
fib_rules_unregister(net->ipv6.mr6_rules_ops);
}
#else
IPV6_TLV_PADN, 0 };
/* we assume size > sizeof(ra) here */
- skb = sock_alloc_send_skb(sk, size + LL_ALLOCATED_SPACE(dev), 1, &err);
+ size += LL_ALLOCATED_SPACE(dev);
+ /* limit our allocations to order-0 page */
+ size = min_t(int, size, SKB_MAX_ORDER(0, 0));
+ skb = sock_alloc_send_skb(sk, size, 1, &err);
if (!skb)
return NULL;
struct survey_info *survey)
{
int ret = -EOPNOTSUPP;
- if (local->ops->conf_tx)
+ if (local->ops->get_survey)
ret = local->ops->get_survey(&local->hw, idx, survey);
/* trace_drv_get_survey(local, idx, survey, ret); */
return ret;
rma = ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
break;
case IEEE80211_STYPE_ACTION:
- if (mgmt->u.action.category != WLAN_CATEGORY_SPECTRUM_MGMT)
+ switch (mgmt->u.action.category) {
+ case WLAN_CATEGORY_BACK: {
+ struct ieee80211_local *local = sdata->local;
+ int len = skb->len;
+ struct sta_info *sta;
+
+ rcu_read_lock();
+ sta = sta_info_get(sdata, mgmt->sa);
+ if (!sta) {
+ rcu_read_unlock();
+ break;
+ }
+
+ local_bh_disable();
+
+ switch (mgmt->u.action.u.addba_req.action_code) {
+ case WLAN_ACTION_ADDBA_REQ:
+ if (len < (IEEE80211_MIN_ACTION_SIZE +
+ sizeof(mgmt->u.action.u.addba_req)))
+ break;
+ ieee80211_process_addba_request(local, sta, mgmt, len);
+ break;
+ case WLAN_ACTION_ADDBA_RESP:
+ if (len < (IEEE80211_MIN_ACTION_SIZE +
+ sizeof(mgmt->u.action.u.addba_resp)))
+ break;
+ ieee80211_process_addba_resp(local, sta, mgmt, len);
+ break;
+ case WLAN_ACTION_DELBA:
+ if (len < (IEEE80211_MIN_ACTION_SIZE +
+ sizeof(mgmt->u.action.u.delba)))
+ break;
+ ieee80211_process_delba(sdata, sta, mgmt, len);
+ break;
+ }
+ local_bh_enable();
+ rcu_read_unlock();
break;
-
- ieee80211_sta_process_chanswitch(sdata,
- &mgmt->u.action.u.chan_switch.sw_elem,
- (void *)ifmgd->associated->priv,
- rx_status->mactime);
- break;
+ }
+ case WLAN_CATEGORY_SPECTRUM_MGMT:
+ ieee80211_sta_process_chanswitch(sdata,
+ &mgmt->u.action.u.chan_switch.sw_elem,
+ (void *)ifmgd->associated->priv,
+ rx_status->mactime);
+ break;
+ }
}
mutex_unlock(&ifmgd->mtx);
mutex_unlock(&ifmgd->mtx);
if (skb->len >= 24 + 2 /* mgmt + deauth reason */ &&
- (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DEAUTH)
- cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
+ (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DEAUTH) {
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_work *wk;
+
+ mutex_lock(&local->work_mtx);
+ list_for_each_entry(wk, &local->work_list, list) {
+ if (wk->sdata != sdata)
+ continue;
+
+ if (wk->type != IEEE80211_WORK_ASSOC)
+ continue;
+
+ if (memcmp(mgmt->bssid, wk->filter_ta, ETH_ALEN))
+ continue;
+ if (memcmp(mgmt->sa, wk->filter_ta, ETH_ALEN))
+ continue;
+ /*
+ * Printing the message only here means we can't
+ * spuriously print it, but it also means that it
+ * won't be printed when the frame comes in before
+ * we even tried to associate or in similar cases.
+ *
+ * Ultimately, I suspect cfg80211 should print the
+ * messages instead.
+ */
+ printk(KERN_DEBUG
+ "%s: deauthenticated from %pM (Reason: %u)\n",
+ sdata->name, mgmt->bssid,
+ le16_to_cpu(mgmt->u.deauth.reason_code));
+
+ list_del_rcu(&wk->list);
+ free_work(wk);
+ break;
+ }
+ mutex_unlock(&local->work_mtx);
+
+ cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
+ }
out:
kfree_skb(skb);
}
if (len < IEEE80211_MIN_ACTION_SIZE + 1)
break;
+ if (sdata->vif.type == NL80211_IFTYPE_STATION)
+ return ieee80211_sta_rx_mgmt(sdata, rx->skb);
+
switch (mgmt->u.action.u.addba_req.action_code) {
case WLAN_ACTION_ADDBA_REQ:
if (len < (IEEE80211_MIN_ACTION_SIZE +
.codec_dev = &soc_codec_dev_wm8750,
};
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8750 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8750_i2c_register(void)
-{
- struct i2c_board_info info;
- struct i2c_adapter *adapter;
- struct i2c_client *client;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = 0x1b;
- strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
-
- adapter = i2c_get_adapter(0);
- if (!adapter) {
- printk(KERN_ERR "can't get i2c adapter 0\n");
- return -ENODEV;
- }
-
- client = i2c_new_device(adapter, &info);
- i2c_put_adapter(adapter);
- if (!client) {
- printk(KERN_ERR "can't add i2c device at 0x%x\n",
- (unsigned int)info.addr);
- return -ENODEV;
- }
-
- return 0;
-}
-
static struct platform_device *spitz_snd_device;
static int __init spitz_init(void)
if (!(machine_is_spitz() || machine_is_borzoi() || machine_is_akita()))
return -ENODEV;
- ret = wm8750_i2c_setup();
- if (ret != 0)
- return ret;
-
spitz_snd_device = platform_device_alloc("soc-audio", -1);
if (!spitz_snd_device)
return -ENOMEM;
if (symbol_conf.vmlinux_name != NULL) {
err = dso__load_vmlinux(self, map,
symbol_conf.vmlinux_name, filter);
- goto out_try_fixup;
+ if (err > 0) {
+ dso__set_long_name(self,
+ strdup(symbol_conf.vmlinux_name));
+ goto out_fixup;
+ }
+ return err;
}
if (vmlinux_path != NULL) {
pr_debug("Using %s for symbols\n", kallsyms_filename);
free(kallsyms_allocated_filename);
-out_try_fixup:
if (err > 0) {
out_fixup:
if (kallsyms_filename != NULL)
git.openpandora.org / pandora-kernel.git / commitdiff