V4L/DVB (10077): mt9m111: add support for mt9m112 since sensors seem identical

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index eb9ff7e..da538d9 100644 (file)
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -736,10 +736,10 @@ config MT9M001_PCA9536_SWITCH
          extender to switch between 8 and 10 bit datawidth modes
 
 config SOC_CAMERA_MT9M111
-       tristate "mt9m111 support"
+       tristate "mt9m111 and mt9m112 support"
        depends on SOC_CAMERA && I2C
        help
-         This driver supports MT9M111 cameras from Micron
+         This driver supports MT9M111 and MT9M112 cameras from Micron
 
 config SOC_CAMERA_MT9V022
        tristate "mt9v022 support"

diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index 2ab1e0f..3dfeea4 100644 (file)
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -1,5 +1,5 @@
 /*
- * Driver for MT9M111 CMOS Image Sensor from Micron
+ * Driver for MT9M111/MT9M112 CMOS Image Sensor from Micron
  *
  * Copyright (C) 2008, Robert Jarzmik <robert.jarzmik@free.fr>
  *
@@ -19,7 +19,7 @@
 #include <media/soc_camera.h>
 
 /*
- * mt9m111 i2c address is 0x5d or 0x48 (depending on SAddr pin)
+ * mt9m111 and mt9m112 i2c address is 0x5d or 0x48 (depending on SAddr pin)
  * The platform has to define i2c_board_info and call i2c_register_board_info()
  */
 
@@ -150,7 +150,7 @@ enum mt9m111_context {
 struct mt9m111 {
        struct i2c_client *client;
        struct soc_camera_device icd;
-       int model;      /* V4L2_IDENT_MT9M111* codes from v4l2-chip-ident.h */
+       int model;      /* V4L2_IDENT_MT9M11x* codes from v4l2-chip-ident.h */
        enum mt9m111_context context;
        unsigned int left, top, width, height;
        u32 pixfmt;
@@ -846,7 +846,7 @@ static int mt9m111_init(struct soc_camera_device *icd)
        if (!ret)
                ret = mt9m111_set_autoexposure(icd, mt9m111->autoexposure);
        if (ret)
-               dev_err(&icd->dev, "mt9m111 init failed: %d\n", ret);
+               dev_err(&icd->dev, "mt9m11x init failed: %d\n", ret);
        return ret;
 }
 
@@ -856,7 +856,7 @@ static int mt9m111_release(struct soc_camera_device *icd)
 
        ret = mt9m111_disable(icd);
        if (ret < 0)
-               dev_err(&icd->dev, "mt9m111 release failed: %d\n", ret);
+               dev_err(&icd->dev, "mt9m11x release failed: %d\n", ret);
 
        return ret;
 }
@@ -889,19 +889,23 @@ static int mt9m111_video_probe(struct soc_camera_device *icd)
        data = reg_read(CHIP_VERSION);
 
        switch (data) {
-       case 0x143a:
+       case 0x143a: /* MT9M111 */
                mt9m111->model = V4L2_IDENT_MT9M111;
-               icd->formats = mt9m111_colour_formats;
-               icd->num_formats = ARRAY_SIZE(mt9m111_colour_formats);
+               break;
+       case 0x148c: /* MT9M112 */
+               mt9m111->model = V4L2_IDENT_MT9M112;
                break;
        default:
                ret = -ENODEV;
                dev_err(&icd->dev,
-                       "No MT9M111 chip detected, register read %x\n", data);
+                       "No MT9M11x chip detected, register read %x\n", data);
                goto ei2c;
        }
 
-       dev_info(&icd->dev, "Detected a MT9M111 chip ID 0x143a\n");
+       icd->formats = mt9m111_colour_formats;
+       icd->num_formats = ARRAY_SIZE(mt9m111_colour_formats);
+
+       dev_info(&icd->dev, "Detected a MT9M11x chip ID %x\n", data);
 
        ret = soc_camera_video_start(icd);
        if (ret)
@@ -938,7 +942,7 @@ static int mt9m111_probe(struct i2c_client *client,
        int ret;
 
        if (!icl) {
-               dev_err(&client->dev, "MT9M111 driver needs platform data\n");
+               dev_err(&client->dev, "MT9M11x driver needs platform data\n");
                return -EINVAL;
        }
 
@@ -1017,6 +1021,6 @@ static void __exit mt9m111_mod_exit(void)
 module_init(mt9m111_mod_init);
 module_exit(mt9m111_mod_exit);
 
-MODULE_DESCRIPTION("Micron MT9M111 Camera driver");
+MODULE_DESCRIPTION("Micron MT9M111/MT9M112 Camera driver");
 MODULE_AUTHOR("Robert Jarzmik");
 MODULE_LICENSE("GPL");