* 'master' of hera.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (29 commits)
[PARISC] fix uninitialized variable warning in asm/rtc.h
[PARISC] Port checkstack.pl to parisc
[PARISC] Make palo target work when $obj != $src
[PARISC] Zap unused variable warnings in pci.c
[PARISC] Fix tests in palo target
[PARISC] Fix palo target
[PARISC] Restore palo target
[PARISC] Attempt to clean up parisc/Makefile
[PARISC] Fix infinite loop in /proc/iomem
[PARISC] Quiet sysfs_create_link __must_check warnings in pdc_stable
[PARISC] Squelch pci_enable_device __must_check warning in superio
[PARISC] Kill off broken irqstack code
[PARISC] Remove hardcoded uses of PAGE_SIZE
[PARISC] Clean up pointless ASM_PAGE_SIZE_DIV use
[PARISC] Kill off the last vestiges of ASM_PAGE_SIZE
[PARISC] Kill off ASM_PAGE_SIZE use
[PARISC] Beautify parisc vmlinux.lds.S
[PARISC] Clean up a resource_size_t warning in sba_iommu
[PARISC] Kill incorrect cast warning in unwinder
[PARISC] Kill zone_to_nid printk warning
...
Fixed trivial conflict in include/asm-parisc/tlbflush.h manually
NM = sh $(srctree)/arch/parisc/nm
CHECKFLAGS += -D__hppa__=1
+MACHINE := $(shell uname -m)
+ifeq ($(MACHINE),parisc*)
+NATIVE := 1
+endif
+
ifdef CONFIG_64BIT
-CROSS_COMPILE := $(shell if [ -x /usr/bin/hppa64-linux-gnu-gcc ]; then \
- echo hppa64-linux-gnu-; else echo hppa64-linux-; fi)
UTS_MACHINE := parisc64
CHECKFLAGS += -D__LP64__=1 -m64
-else
-MACHINE := $(subst 64,,$(shell uname -m))
-ifneq ($(MACHINE),parisc)
-CROSS_COMPILE := hppa-linux-
-endif
+WIDTH := 64
+CROSS_COMPILE := hppa64-linux-gnu-
+else # 32-bit
+WIDTH :=
endif
-FINAL_LD=$(CROSS_COMPILE)ld --warn-common --warn-section-align
+# attempt to help out folks who are cross-compiling
+ifeq ($(NATIVE),1)
+CROSS_COMPILE := hppa$(WIDTH)-linux-
+endif
OBJCOPY_FLAGS =-O binary -R .note -R .comment -S
-ifneq ($(call cc-ifversion, -lt, 0303, "bad"),)
-$(error Sorry, GCC v3.3 or above is required.)
-endif
-
cflags-y := -pipe
# These flags should be implied by an hppa-linux configuration, but they
kernel-$(CONFIG_HPUX) += hpux/
core-y += $(addprefix arch/parisc/, $(kernel-y))
-libs-y += arch/parisc/lib/ `$(CC) -print-libgcc-file-name`
+libs-y += arch/parisc/lib/
drivers-$(CONFIG_OPROFILE) += arch/parisc/oprofile/
elif [ -x /sbin/palo ]; then echo /sbin/palo; \
fi)
+PALOCONF := $(shell if [ -f $(src)/palo.conf ]; then echo $(src)/palo.conf; \
+ else echo $(obj)/palo.conf; \
+ fi)
+
palo: vmlinux
- @if [ -x $PALO ]; then \
+ @if test ! -x "$(PALO)"; then \
echo 'ERROR: Please install palo first (apt-get install palo)';\
echo 'or build it from source and install it somewhere in your $$PATH';\
false; \
fi
- @if [ ! -f ./palo.conf ]; then \
- cp arch/parisc/defpalo.conf palo.conf; \
- echo 'A generic palo config file (./palo.conf) has been created for you.'; \
+ @if test ! -f "$(PALOCONF)"; then \
+ cp $(src)/arch/parisc/defpalo.conf $(obj)/palo.conf; \
+ echo 'A generic palo config file ($(obj)/palo.conf) has been created for you.'; \
echo 'You should check it and re-run "make palo".'; \
echo 'WARNING: the "lifimage" file is now placed in this directory by default!'; \
false; \
fi
- $(PALO) -f ./palo.conf
-
-oldpalo: vmlinux
- export TOPDIR=`pwd`; \
- unset STRIP LDFLAGS CPP CPPFLAGS AFLAGS CFLAGS CC LD; cd ../palo && make lifimage
+ $(PALO) -f $(PALOCONF)
-# Shorthands for known targets not supported by parisc, use palo as default
-Image zImage bzImage: palo
+# Shorthands for known targets not supported by parisc, use vmlinux as default
+Image zImage bzImage: vmlinux
kernel_install: vmlinux
sh $(src)/arch/parisc/install.sh \
@echo ' (distribution) /sbin/installkernel or'
@echo ' copy to $$(INSTALL_PATH)'
endef
+
+# we require gcc 3.3 or above to compile the kernel
+archprepare: checkbin
+checkbin:
+ @if test "$(call cc-version)" -lt "0303"; then \
+ echo -n "Sorry, GCC v3.3 or above is required to build " ; \
+ echo "the kernel." ; \
+ false ; \
+ fi
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-pa6
-# Sun Mar 26 19:59:51 2006
+# Linux kernel version: 2.6.23
+# Fri Oct 12 21:00:07 2007
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
# CONFIG_PA7300LC is not set
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
+CONFIG_PARISC_PAGE_SIZE_4KB=y
+# CONFIG_PARISC_PAGE_SIZE_16KB is not set
+# CONFIG_PARISC_PAGE_SIZE_64KB is not set
# CONFIG_SMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
# CONFIG_HPUX is not set
#
# CONFIG_GSC_WAX is not set
# CONFIG_EISA is not set
# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-
#
# PA-RISC specific drivers
#
CONFIG_CHASSIS_LCD_LED=y
# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_CHASSIS_WARN=y
CONFIG_PDC_STABLE=y
#
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_GSC=y
+# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_BLK_DEV=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IDE is not set
#
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# SCSI Transport Attributes
+# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_LASI700=y
CONFIG_53C700_LE_ON_BE=y
# CONFIG_SCSI_ZALON is not set
CONFIG_SCSI_DEBUG=m
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_LASI_82596=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
# CONFIG_NET_POCKET is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ATMEL is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
+CONFIG_SLHC=m
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_HIL_OLD is not set
CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_HIL=m
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_GSC=y
CONFIG_SERIAL_8250_NR_UARTS=17
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
# CONFIG_I2C is not set
#
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
CONFIG_FB_STI=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_DUMMY_CONSOLE_COLUMNS=128
CONFIG_DUMMY_CONSOLE_ROWS=48
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
CONFIG_FONTS=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_PORTMAN2X4 is not set
#
# GSC devices
CONFIG_SND_HARMONY=y
#
-# Open Sound System
+# System on Chip audio support
#
-# CONFIG_SOUND_PRIME is not set
+# CONFIG_SND_SOC is not set
#
-# USB support
+# SoC Audio support for SuperH
#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# MMC/SD Card support
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
#
-# CONFIG_MMC is not set
#
-# InfiniBand support
+# DMA Devices
#
+# CONFIG_AUXDISPLAY is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# Userspace I/O
#
+# CONFIG_UIO is not set
#
# File systems
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Profiling support
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
CONFIG_DEBUG_RODATA=y
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc5-pa1
-# Fri Oct 21 23:04:54 2005
+# Linux kernel version: 2.6.23
+# Fri Oct 12 21:12:44 2007
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
# CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
CONFIG_PA20=y
CONFIG_PREFETCH=y
CONFIG_64BIT=y
+CONFIG_PARISC_PAGE_SIZE_4KB=y
+# CONFIG_PARISC_PAGE_SIZE_16KB is not set
+# CONFIG_PARISC_PAGE_SIZE_64KB is not set
CONFIG_SMP=y
CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_NODES_SHIFT=3
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_PREEMPT is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
CONFIG_COMPAT=y
CONFIG_NR_CPUS=8
#
# CONFIG_GSC is not set
CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
# PC-card bridges
#
CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
-
-#
-# PCI Hotplug Support
-#
# CONFIG_HOTPLUG_PCI is not set
#
# CONFIG_SUPERIO is not set
# CONFIG_CHASSIS_LCD_LED is not set
CONFIG_PDC_CHASSIS=y
+CONFIG_PDC_CHASSIS_WARN=y
CONFIG_PDC_STABLE=y
#
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_LIMIT is not set
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_MARK is not set
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_AHESP is not set
-# CONFIG_IP6_NF_MATCH_LENGTH is not set
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
# CONFIG_IP6_NF_MATCH_EUI64 is not set
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_MARK is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
# CONFIG_IDE is not set
#
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# SCSI Transport Attributes
+# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_CPQFCTS is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-CONFIG_SCSI_QLOGIC_FC=m
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_QLOGIC_1280=m
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m
-
-#
-# PCMCIA SCSI adapter support
-#
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_QLOGIC=m
-CONFIG_PCMCIA_SYM53C500=m
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
+# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
-
-#
-# Tulip family network device support
-#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=y
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
CONFIG_PCMCIA_XIRCOM=m
-# CONFIG_PCMCIA_XIRTULIP is not set
CONFIG_HP100=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
+# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-CONFIG_PCMCIA_NETWAVE=m
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-CONFIG_PCMCIA_RAYCS=m
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-# CONFIG_NORTEL_HERMES is not set
-CONFIG_PCI_HERMES=m
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-CONFIG_AIRO_CS=m
-CONFIG_PCMCIA_WL3501=m
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
+CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=17
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_MUX is not set
CONFIG_PDC_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
+CONFIG_AGP=y
+CONFIG_AGP_PARISC=y
# CONFIG_DRM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
#
-# MMC/SD Card support
+# DMA Engine support
#
-# CONFIG_MMC is not set
+# CONFIG_DMA_ENGINE is not set
#
-# InfiniBand support
+# DMA Clients
#
-# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# DMA Devices
#
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
#
# File systems
#
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Profiling support
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_IOREMAP is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_RWLOCK is not set
+# CONFIG_DEBUG_RODATA is not set
#
# Security options
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
+CONFIG_CRYPTO_CAST5=m
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1-pa0
-# Tue Jan 17 08:21:01 2006
+# Linux kernel version: 2.6.23
+# Fri Oct 12 21:16:46 2007
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
# CONFIG_PA7300LC is not set
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
+CONFIG_PARISC_PAGE_SIZE_4KB=y
+# CONFIG_PARISC_PAGE_SIZE_16KB is not set
+# CONFIG_PARISC_PAGE_SIZE_64KB is not set
# CONFIG_SMP is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PREEMPT is not set
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
# CONFIG_HPUX is not set
#
CONFIG_EISA_NAMES=y
CONFIG_ISA=y
CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_GSC_DINO=y
# CONFIG_PCI_LBA is not set
#
# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-
#
# PA-RISC specific drivers
#
CONFIG_CHASSIS_LCD_LED=y
# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_CHASSIS_WARN=y
CONFIG_PDC_STABLE=y
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+CONFIG_IPV6_SIT=y
# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
-CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_GSC=y
+# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
+CONFIG_PARPORT_NOT_PC=y
# CONFIG_PNP is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
# CONFIG_IDE is not set
#
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# SCSI Transport Attributes
+# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_LASI700=y
CONFIG_53C700_LE_ON_BE=y
+# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_ZALON=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=40
-# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP is not set
+# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=y
+# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
-# I2O device support
+# An alternative FireWire stack is available with EXPERIMENTAL=y
#
+# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_LASI_82596=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
CONFIG_NET_TULIP=y
CONFIG_TULIP=y
# CONFIG_TULIP_MMIO is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_QLA3XXX is not set
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_SLIP is not set
+CONFIG_SLHC=y
# CONFIG_NET_FC is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_HIL_OLD is not set
CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_HIL=y
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_HP_SDC_RTC is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_GSC=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=13
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_FOURPORT is not set
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
# CONFIG_SERIAL_8250_HUB6 is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
CONFIG_SERIAL_MUX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
+# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
# CONFIG_FB_VIRTUAL is not set
#
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_PARISC_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
CONFIG_SND_HARMONY=y
#
-# Open Sound System
+# System on Chip audio support
#
-# CONFIG_SOUND_PRIME is not set
+# CONFIG_SND_SOC is not set
#
-# USB support
+# SoC Audio support for SuperH
+#
+
+#
+# Open Sound System
#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
#
-# MMC/SD Card support
+# DMA Engine support
#
-# CONFIG_MMC is not set
+# CONFIG_DMA_ENGINE is not set
#
-# InfiniBand support
+# DMA Clients
#
-# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# DMA Devices
#
+# CONFIG_AUXDISPLAY is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
#
# File systems
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_IOREMAP is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_RODATA is not set
#
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=y
-# CONFIG_SECURITY_SECLVL is not set
-# CONFIG_SECURITY_SELINUX is not set
-
-#
-# Cryptographic options
-#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-pa6
-# Sun Mar 26 20:03:29 2006
+# Linux kernel version: 2.6.23
+# Fri Oct 12 21:24:00 2007
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
CONFIG_PA20=y
CONFIG_PREFETCH=y
# CONFIG_64BIT is not set
+CONFIG_PARISC_PAGE_SIZE_4KB=y
+# CONFIG_PARISC_PAGE_SIZE_16KB is not set
+# CONFIG_PARISC_PAGE_SIZE_64KB is not set
# CONFIG_SMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
# CONFIG_HPUX is not set
#
#
# CONFIG_GSC is not set
CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
# CONFIG_HOTPLUG_PCI is not set
#
CONFIG_SUPERIO=y
CONFIG_CHASSIS_LCD_LED=y
# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_CHASSIS_WARN=y
CONFIG_PDC_STABLE=y
#
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
+CONFIG_IDEDMA_ONLYDISK=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# SCSI Transport Attributes
+# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
-# CONFIG_SCSI_SATA_SVW is not set
-CONFIG_SCSI_ATA_PIIX=m
-# CONFIG_SCSI_SATA_MV is not set
-# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_PDC_ADMA is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-CONFIG_SCSI_SATA_PROMISE=m
-# CONFIG_SCSI_SATA_SX4 is not set
-CONFIG_SCSI_SATA_SIL=m
-# CONFIG_SCSI_SATA_SIL24 is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-CONFIG_SCSI_SATA_VIA=m
-# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_DEBUG=m
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP is not set
+# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_EMC is not set
+# CONFIG_DM_MULTIPATH_RDAC is not set
+# CONFIG_DM_DELAY is not set
#
# Fusion MPT device support
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
+# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=y
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
#
-# Wan interfaces
+# USB Network Adapters
#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
+CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=13
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
+# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# Generic devices
#
CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# PCI devices
#
CONFIG_SND_AD1889=y
-# CONFIG_SND_AD1889_OPL3 is not set
+# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
#
-# USB support
+# USB Input Devices
#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
#
-# MMC/SD Card support
+# DMA Engine support
#
-# CONFIG_MMC is not set
+# CONFIG_DMA_ENGINE is not set
#
-# InfiniBand support
+# DMA Clients
#
-# CONFIG_INFINIBAND is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# DMA Devices
#
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
#
# File systems
#
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Profiling support
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
CONFIG_DEBUG_RODATA=y
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-pa10
-# Sun Apr 2 15:26:38 2006
+# Linux kernel version: 2.6.23
+# Fri Oct 12 20:54:57 2007
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
# CONFIG_HPUX is not set
#
CONFIG_EISA_NAMES=y
# CONFIG_ISA is not set
CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_GSC_DINO=y
CONFIG_PCI_LBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
# CONFIG_HOTPLUG_PCI is not set
#
CONFIG_SUPERIO=y
CONFIG_CHASSIS_LCD_LED=y
CONFIG_PDC_CHASSIS=y
+CONFIG_PDC_CHASSIS_WARN=y
CONFIG_PDC_STABLE=y
#
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
-CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_GSC=y
+# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_BLK_DEV=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
+CONFIG_IDEDMA_ONLYDISK=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# SCSI Transport Attributes
+# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_LASI700=y
CONFIG_53C700_LE_ON_BE=y
+# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_ZALON=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
-# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=y
+# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
#
# Fusion MPT device support
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_LASI_82596=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
-
-#
-# Tulip family network device support
-#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_PCMCIA_XIRTULIP is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_AC3200 is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_LNE390 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=y
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
+# Wireless LAN
#
-CONFIG_PCMCIA_HERMES=y
-CONFIG_PCMCIA_SPECTRUM=y
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
+# USB Network Adapters
#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
+CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_HIL_OLD is not set
CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
+# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_HIL=y
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_GSC=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=17
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
+# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
CONFIG_DUMMY_CONSOLE_COLUMNS=128
CONFIG_DUMMY_CONSOLE_ROWS=48
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
CONFIG_FONTS=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
-CONFIG_SND_OPL3_LIB=y
CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
CONFIG_SND_AD1889=y
-CONFIG_SND_AD1889_OPL3=y
+# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
#
# PCMCIA devices
#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
#
# GSC devices
#
CONFIG_SND_HARMONY=y
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
#
-# USB support
+# USB Input Devices
#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
CONFIG_USB_MON=y
#
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
#
-# MMC/SD Card support
+# DMA Engine support
#
-# CONFIG_MMC is not set
+# CONFIG_DMA_ENGINE is not set
#
-# InfiniBand support
+# DMA Clients
#
-# CONFIG_INFINIBAND is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+
+#
+# Userspace I/O
#
+# CONFIG_UIO is not set
#
# File systems
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Profiling support
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_RODATA is not set
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
.import hpux_call_table
.import hpux_syscall_exit,code
- .align 4096
+ .align PAGE_SIZE
ENTRY(hpux_gateway_page)
nop
#ifdef CONFIG_64BIT
ldo -ENOSYS(%r0),%r28
ENDPROC(hpux_gateway_page)
- .align 4096
+ .align PAGE_SIZE
ENTRY(end_hpux_gateway_page)
DEFINE(ASM_PTE_ENTRY_SIZE, PTE_ENTRY_SIZE);
DEFINE(ASM_PFN_PTE_SHIFT, PFN_PTE_SHIFT);
DEFINE(ASM_PT_INITIAL, PT_INITIAL);
- DEFINE(ASM_PAGE_SIZE, PAGE_SIZE);
- DEFINE(ASM_PAGE_SIZE_DIV64, PAGE_SIZE/64);
- DEFINE(ASM_PAGE_SIZE_DIV128, PAGE_SIZE/128);
BLANK();
DEFINE(EXCDATA_IP, offsetof(struct exception_data, fault_ip));
DEFINE(EXCDATA_SPACE, offsetof(struct exception_data, fault_space));
* The "get_stack" macros are responsible for determining the
* kernel stack value.
*
- * For Faults:
* If sr7 == 0
* Already using a kernel stack, so call the
* get_stack_use_r30 macro to push a pt_regs structure
* task pointer pointed to by cr30. Set the stack
* pointer to point to the end of the task structure.
*
- * For Interrupts:
- * If sr7 == 0
- * Already using a kernel stack, check to see if r30
- * is already pointing to the per processor interrupt
- * stack. If it is, call the get_stack_use_r30 macro
- * to push a pt_regs structure on the stack, and store
- * registers there. Otherwise, call get_stack_use_cr31
- * to get a pointer to the base of the interrupt stack
- * and push a pt_regs structure on that stack.
- * else
- * Need to set up a kernel stack, so call the
- * get_stack_use_cr30 macro to set up a pointer
- * to the pt_regs structure contained within the
- * task pointer pointed to by cr30. Set the stack
- * pointer to point to the end of the task structure.
- * N.B: We don't use the interrupt stack for the
- * first interrupt from userland, because signals/
- * resched's are processed when returning to userland,
- * and we can sleep in those cases.
- *
* Note that we use shadowed registers for temps until
* we can save %r26 and %r29. %r26 is used to preserve
* %r8 (a shadowed register) which temporarily contained
.text
- .align 4096
+ .align PAGE_SIZE
ENTRY(fault_vector_20)
/* First vector is invalid (0) */
*
*/
- .align 4096
+ .align PAGE_SIZE
ENTRY(syscall_exit_rfi)
mfctl %cr30,%r16
intr_extint:
CMPIB=,n 0,%r16,1f
+
get_stack_use_cr30
- b,n 3f
+ b,n 2f
1:
-#if 0 /* Interrupt Stack support not working yet! */
- mfctl %cr31,%r1
- copy %r30,%r17
- /* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/
- DEPI 0,31,15,%r17
- CMPB=,n %r1,%r17,2f
- get_stack_use_cr31
- b,n 3f
-#endif
-2:
get_stack_use_r30
-
-3:
+2:
save_specials %r29
virt_map
save_general %r29
1:
stw %r3,0(%r4)
- ldo (ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3
+ ldo (PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3
addib,> -1,%r1,1b
#if PT_NLEVELS == 3
ldo ASM_PMD_ENTRY_SIZE(%r4),%r4
/* And the stack pointer too */
ldo THREAD_SZ_ALGN(%r6),%sp
- /* And the interrupt stack */
- load32 interrupt_stack,%r6
- mtctl %r6,%cr31
-
#ifdef CONFIG_SMP
/* Set the smp rendevous address into page zero.
** It would be safer to do this in init_smp_config() but
* IODC requires 7K byte stack. That leaves 1K byte for os_hpmc.
*/
- .align 4096
+ .align PAGE_SIZE
hpmc_stack:
.block 16384
#define HPMC_IODC_BUF_SIZE 0x8000
- .align 4096
+ .align PAGE_SIZE
hpmc_iodc_buf:
.block HPMC_IODC_BUF_SIZE
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-unsigned char interrupt_stack[ISTACK_SIZE] __attribute__ ((section("init_istack"), aligned(4096)));
union thread_union init_thread_union
__attribute__((aligned(128))) __attribute__((__section__(".data.init_task"))) =
{ INIT_THREAD_INFO(init_task) };
*/
ldd 0(%r25), %r19
- ldi ASM_PAGE_SIZE_DIV128, %r1
+ ldi (PAGE_SIZE / 128), %r1
ldw 64(%r25), %r0 /* prefetch 1 cacheline ahead */
ldw 128(%r25), %r0 /* prefetch 2 */
* use ldd/std on a 32 bit kernel.
*/
ldw 0(%r25), %r19
- ldi ASM_PAGE_SIZE_DIV64, %r1
+ ldi (PAGE_SIZE / 64), %r1
1:
ldw 4(%r25), %r20
pdtlb 0(%r28)
#ifdef CONFIG_64BIT
- ldi ASM_PAGE_SIZE_DIV128, %r1
+ ldi (PAGE_SIZE / 128), %r1
/* PREFETCH (Write) has not (yet) been proven to help here */
/* #define PREFETCHW_OP ldd 256(%0), %r0 */
ldo 128(%r28), %r28
#else /* ! CONFIG_64BIT */
- ldi ASM_PAGE_SIZE_DIV64, %r1
+ ldi (PAGE_SIZE / 64), %r1
1:
stw %r0, 0(%r28)
EXPORT_SYMBOL($$divI_14);
EXPORT_SYMBOL($$divI_15);
-extern void __ashrdi3(void);
-extern void __ashldi3(void);
-extern void __lshrdi3(void);
-extern void __muldi3(void);
-
-EXPORT_SYMBOL(__ashrdi3);
-EXPORT_SYMBOL(__ashldi3);
-EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(__muldi3);
-
asmlinkage void * __canonicalize_funcptr_for_compare(void *);
EXPORT_SYMBOL(__canonicalize_funcptr_for_compare);
-#ifdef CONFIG_64BIT
-extern void __divdi3(void);
-extern void __udivdi3(void);
-extern void __umoddi3(void);
-extern void __moddi3(void);
-
-EXPORT_SYMBOL(__divdi3);
-EXPORT_SYMBOL(__udivdi3);
-EXPORT_SYMBOL(__umoddi3);
-EXPORT_SYMBOL(__moddi3);
-#endif
-
#ifndef CONFIG_64BIT
extern void $$dyncall(void);
EXPORT_SYMBOL($$dyncall);
static void *pa11_dma_alloc_noncoherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
- void *addr = NULL;
+ void *addr;
- /* rely on kmalloc to be cacheline aligned */
- addr = kmalloc(size, flag);
- if(addr)
+ addr = (void *)__get_free_pages(flag, get_order(size));
+ if (addr)
*dma_handle = (dma_addr_t)virt_to_phys(addr);
return addr;
static void pa11_dma_free_noncoherent(struct device *dev, size_t size,
void *vaddr, dma_addr_t iova)
{
- kfree(vaddr);
+ free_pages((unsigned long)vaddr, get_order(size));
return;
}
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bridge_ctl);
}
-
-/* KLUGE: Link the child and parent resources - generic PCI didn't */
-static void
-pcibios_link_hba_resources( struct resource *hba_res, struct resource *r)
-{
- if (!r->parent) {
- printk(KERN_EMERG "PCI: resource not parented! [%p-%p]\n",
- (void*) r->start, (void*) r->end);
- r->parent = hba_res;
-
- /* reverse link is harder *sigh* */
- if (r->parent->child) {
- if (r->parent->sibling) {
- struct resource *next = r->parent->sibling;
- while (next->sibling)
- next = next->sibling;
- next->sibling = r;
- } else {
- r->parent->sibling = r;
- }
- } else
- r->parent->child = r;
- }
-}
-
/* called by drivers/pci/setup-bus.c:pci_setup_bridge(). */
void __devinit pcibios_resource_to_bus(struct pci_dev *dev,
struct pci_bus_region *region, struct resource *res)
{
- struct pci_bus *bus = dev->bus;
- struct pci_hba_data *hba = HBA_DATA(bus->bridge->platform_data);
+#ifdef CONFIG_64BIT
+ struct pci_hba_data *hba = HBA_DATA(dev->bus->bridge->platform_data);
+#endif
if (res->flags & IORESOURCE_IO) {
/*
}
DBG_RES("pcibios_resource_to_bus(%02x %s [%lx,%lx])\n",
- bus->number, res->flags & IORESOURCE_IO ? "IO" : "MEM",
+ dev->bus->number, res->flags & IORESOURCE_IO ? "IO" : "MEM",
region->start, region->end);
-
- /* KLUGE ALERT
- ** if this resource isn't linked to a "parent", then it seems
- ** to be a child of the HBA - lets link it in.
- */
- pcibios_link_hba_resources(&hba->io_space, bus->resource[0]);
- pcibios_link_hba_resources(&hba->lmmio_space, bus->resource[1]);
}
void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
struct pci_bus_region *region)
{
#ifdef CONFIG_64BIT
- struct pci_bus *bus = dev->bus;
- struct pci_hba_data *hba = HBA_DATA(bus->bridge->platform_data);
+ struct pci_hba_data *hba = HBA_DATA(dev->bus->bridge->platform_data);
#endif
if (res->flags & IORESOURCE_MEM) {
unsigned long cpuid;
struct cpuinfo_parisc *p;
-#ifndef CONFIG_SMP
+#ifdef CONFIG_SMP
+ if (num_online_cpus() >= NR_CPUS) {
+ printk(KERN_INFO "num_online_cpus() >= NR_CPUS\n");
+ return 1;
+ }
+#else
if (boot_cpu_data.cpu_count > 0) {
printk(KERN_INFO "CONFIG_SMP=n ignoring additional CPUs\n");
return 1;
void __init smp_callin(void)
{
int slave_id = cpu_now_booting;
-#if 0
- void *istack;
-#endif
smp_cpu_init(slave_id);
preempt_disable();
-#if 0 /* NOT WORKING YET - see entry.S */
- istack = (void *)__get_free_pages(GFP_KERNEL,ISTACK_ORDER);
- if (istack == NULL) {
- printk(KERN_CRIT "Failed to allocate interrupt stack for cpu %d\n",slave_id);
- BUG();
- }
- mtctl(istack,31);
-#endif
-
flush_cache_all_local(); /* start with known state */
flush_tlb_all_local(NULL);
return sys_lookup_dcookie((u64)cookie_high << 32 | cookie_low,
buf, len);
}
+
+asmlinkage long compat_sys_fallocate(int fd, int mode, u32 offhi, u32 offlo,
+ u32 lenhi, u32 lenlo)
+{
+ return sys_fallocate(fd, mode, ((loff_t)offhi << 32) | offlo,
+ ((loff_t)lenhi << 32) | lenlo);
+}
#include <asm/asm-offsets.h>
#include <asm/unistd.h>
#include <asm/errno.h>
+#include <asm/page.h>
#include <asm/psw.h>
#include <asm/thread_info.h>
#include <asm/assembly.h>
* pointers.
*/
- .align ASM_PAGE_SIZE
+ .align PAGE_SIZE
ENTRY(linux_gateway_page)
/* ADDRESS 0x00 to 0xb0 = 176 bytes / 4 bytes per insn = 44 insns */
/* Make sure nothing else is placed on this page */
- .align ASM_PAGE_SIZE
+ .align PAGE_SIZE
END(linux_gateway_page)
ENTRY(end_linux_gateway_page)
.section .rodata,"a"
- .align ASM_PAGE_SIZE
+ .align PAGE_SIZE
/* Light-weight-syscall table */
/* Start of lws table. */
ENTRY(lws_table)
END(lws_table)
/* End of lws table */
- .align ASM_PAGE_SIZE
+ .align PAGE_SIZE
ENTRY(sys_call_table)
#include "syscall_table.S"
END(sys_call_table)
#ifdef CONFIG_64BIT
- .align ASM_PAGE_SIZE
+ .align PAGE_SIZE
ENTRY(sys_call_table64)
#define SYSCALL_TABLE_64BIT
#include "syscall_table.S"
will use this set of locks
*/
.section .data
- .align 4096
+ .align PAGE_SIZE
ENTRY(lws_lock_start)
/* lws locks */
.align 16
ENTRY_COMP(signalfd)
ENTRY_COMP(timerfd)
ENTRY_SAME(eventfd)
+ ENTRY_COMP(fallocate) /* 305 */
/* Nothing yet */
#ifdef CONFIG_SMP
int update_cr16_clocksource(void)
{
- int change = 0;
-
/* since the cr16 cycle counters are not synchronized across CPUs,
we'll check if we should switch to a safe clocksource: */
if (clocksource_cr16.rating != 0 && num_online_cpus() > 1) {
clocksource_change_rating(&clocksource_cr16, 0);
- change = 1;
+ return 1;
}
- return change;
+ return 0;
}
#else
int update_cr16_clocksource(void)
static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int frame_size)
{
- void handle_interruption(int, struct pt_regs *);
- static unsigned long *hi = (unsigned long)&handle_interruption;
+ extern void handle_interruption(int, struct pt_regs *);
+ static unsigned long *hi = (unsigned long *)&handle_interruption;
if (pc == get_func_addr(hi)) {
struct pt_regs *regs = (struct pt_regs *)(info->sp - frame_size - PT_SZ_ALGN);
#endif
SECTIONS
{
+ . = KERNEL_BINARY_TEXT_START;
- . = KERNEL_BINARY_TEXT_START;
-
- _text = .; /* Text and read-only data */
- .text ALIGN(16) : {
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- *(.text.do_softirq)
- *(.text.sys_exit)
- *(.text.do_sigaltstack)
- *(.text.do_fork)
- *(.text.*)
- *(.fixup)
- *(.lock.text) /* out-of-line lock text */
- *(.gnu.warning)
+ _text = .; /* Text and read-only data */
+ .text ALIGN(16) : {
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ *(.text.do_softirq)
+ *(.text.sys_exit)
+ *(.text.do_sigaltstack)
+ *(.text.do_fork)
+ *(.text.*)
+ *(.fixup)
+ *(.lock.text) /* out-of-line lock text */
+ *(.gnu.warning)
} = 0
+ /* End of text section */
+ _etext = .;
- _etext = .; /* End of text section */
+ RODATA
+ BUG_TABLE
- RODATA
-
- BUG_TABLE
-
- /* writeable */
- . = ALIGN(ASM_PAGE_SIZE); /* Make sure this is page aligned so
- that we can properly leave these
- as writable */
- data_start = .;
-
- . = ALIGN(16); /* Exception table */
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
+ /* writeable */
+ /* Make sure this is page aligned so
+ * that we can properly leave these
+ * as writable
+ */
+ . = ALIGN(PAGE_SIZE);
+ data_start = .;
+ . = ALIGN(16);
+ /* Exception table */
+ __ex_table : {
+ __start___ex_table = .;
+ *(__ex_table)
+ __stop___ex_table = .;
+ }
- NOTES
+ NOTES
- __start___unwind = .; /* unwind info */
- .PARISC.unwind : { *(.PARISC.unwind) }
- __stop___unwind = .;
+ /* unwind info */
+ .PARISC.unwind : {
+ __start___unwind = .;
+ *(.PARISC.unwind)
+ __stop___unwind = .;
+ }
- /* rarely changed data like cpu maps */
- . = ALIGN(16);
- .data.read_mostly : { *(.data.read_mostly) }
+ /* rarely changed data like cpu maps */
+ . = ALIGN(16);
+ .data.read_mostly : {
+ *(.data.read_mostly)
+ }
- . = ALIGN(L1_CACHE_BYTES);
- .data : { /* Data */
- DATA_DATA
- CONSTRUCTORS
+ . = ALIGN(L1_CACHE_BYTES);
+ /* Data */
+ .data : {
+ DATA_DATA
+ CONSTRUCTORS
}
- . = ALIGN(L1_CACHE_BYTES);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+ . = ALIGN(L1_CACHE_BYTES);
+ .data.cacheline_aligned : {
+ *(.data.cacheline_aligned)
+ }
- /* PA-RISC locks requires 16-byte alignment */
- . = ALIGN(16);
- .data.lock_aligned : { *(.data.lock_aligned) }
+ /* PA-RISC locks requires 16-byte alignment */
+ . = ALIGN(16);
+ .data.lock_aligned : {
+ *(.data.lock_aligned)
+ }
- . = ALIGN(ASM_PAGE_SIZE);
- /* nosave data is really only used for software suspend...it's here
- * just in case we ever implement it */
- __nosave_begin = .;
- .data_nosave : { *(.data.nosave) }
- . = ALIGN(ASM_PAGE_SIZE);
- __nosave_end = .;
+ /* nosave data is really only used for software suspend...it's here
+ * just in case we ever implement it
+ */
+ . = ALIGN(PAGE_SIZE);
+ __nosave_begin = .;
+ .data_nosave : {
+ *(.data.nosave)
+ }
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
- _edata = .; /* End of data section */
+ /* End of data section */
+ _edata = .;
- __bss_start = .; /* BSS */
- /* page table entries need to be PAGE_SIZE aligned */
- . = ALIGN(ASM_PAGE_SIZE);
- .data.vmpages : {
- *(.data.vm0.pmd)
- *(.data.vm0.pgd)
- *(.data.vm0.pte)
+ /* BSS */
+ __bss_start = .;
+ /* page table entries need to be PAGE_SIZE aligned */
+ . = ALIGN(PAGE_SIZE);
+ .data.vmpages : {
+ *(.data.vm0.pmd)
+ *(.data.vm0.pgd)
+ *(.data.vm0.pte)
}
- .bss : { *(.bss) *(COMMON) }
- __bss_stop = .;
-
+ .bss : {
+ *(.bss)
+ *(COMMON)
+ }
+ __bss_stop = .;
- /* assembler code expects init_task to be 16k aligned */
- . = ALIGN(16384); /* init_task */
- .data.init_task : { *(.data.init_task) }
- /* The interrupt stack is currently partially coded, but not yet
- * implemented */
- . = ALIGN(16384);
- init_istack : { *(init_istack) }
+ /* assembler code expects init_task to be 16k aligned */
+ . = ALIGN(16384);
+ /* init_task */
+ .data.init_task : {
+ *(.data.init_task)
+ }
#ifdef CONFIG_64BIT
- . = ALIGN(16); /* Linkage tables */
- .opd : { *(.opd) } PROVIDE (__gp = .);
- .plt : { *(.plt) }
- .dlt : { *(.dlt) }
+ . = ALIGN(16);
+ /* Linkage tables */
+ .opd : {
+ *(.opd)
+ } PROVIDE (__gp = .);
+ .plt : {
+ *(.plt)
+ }
+ .dlt : {
+ *(.dlt)
+ }
#endif
- /* reserve space for interrupt stack by aligning __init* to 16k */
- . = ALIGN(16384);
- __init_begin = .;
- .init.text : {
- _sinittext = .;
- *(.init.text)
- _einittext = .;
- }
- .init.data : { *(.init.data) }
- . = ALIGN(16);
- __setup_start = .;
- .init.setup : { *(.init.setup) }
- __setup_end = .;
- __initcall_start = .;
- .initcall.init : {
- INITCALLS
- }
- __initcall_end = .;
- __con_initcall_start = .;
- .con_initcall.init : { *(.con_initcall.init) }
- __con_initcall_end = .;
- SECURITY_INIT
- /* alternate instruction replacement. This is a mechanism x86 uses
- * to detect the CPU type and replace generic instruction sequences
- * with CPU specific ones. We don't currently do this in PA, but
- * it seems like a good idea... */
- . = ALIGN(4);
- __alt_instructions = .;
- .altinstructions : { *(.altinstructions) }
- __alt_instructions_end = .;
- .altinstr_replacement : { *(.altinstr_replacement) }
- /* .exit.text is discard at runtime, not link time, to deal with references
- from .altinstructions and .eh_frame */
- .exit.text : { *(.exit.text) }
- .exit.data : { *(.exit.data) }
+ /* reserve space for interrupt stack by aligning __init* to 16k */
+ . = ALIGN(16384);
+ __init_begin = .;
+ .init.text : {
+ _sinittext = .;
+ *(.init.text)
+ _einittext = .;
+ }
+ .init.data : {
+ *(.init.data)
+ }
+ . = ALIGN(16);
+ .init.setup : {
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ }
+ .initcall.init : {
+ __initcall_start = .;
+ INITCALLS
+ __initcall_end = .;
+ }
+ .con_initcall.init : {
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ }
+ SECURITY_INIT
+
+ /* alternate instruction replacement. This is a mechanism x86 uses
+ * to detect the CPU type and replace generic instruction sequences
+ * with CPU specific ones. We don't currently do this in PA, but
+ * it seems like a good idea...
+ */
+ . = ALIGN(4);
+ .altinstructions : {
+ __alt_instructions = .;
+ *(.altinstructions)
+ __alt_instructions_end = .;
+ }
+ .altinstr_replacement : {
+ *(.altinstr_replacement)
+ }
+
+ /* .exit.text is discard at runtime, not link time, to deal with references
+ * from .altinstructions and .eh_frame
+ */
+ .exit.text : {
+ *(.exit.text)
+ }
+ .exit.data : {
+ *(.exit.data)
+ }
#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(ASM_PAGE_SIZE);
- __initramfs_start = .;
- .init.ramfs : { *(.init.ramfs) }
- __initramfs_end = .;
+ . = ALIGN(PAGE_SIZE);
+ .init.ramfs : {
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+ }
#endif
- PERCPU(ASM_PAGE_SIZE)
+ PERCPU(PAGE_SIZE)
+ . = ALIGN(PAGE_SIZE);
+ __init_end = .;
+ /* freed after init ends here */
+ _end = . ;
- . = ALIGN(ASM_PAGE_SIZE);
- __init_end = .;
- /* freed after init ends here */
-
- _end = . ;
-
- /* Sections to be discarded */
- /DISCARD/ : {
- *(.exitcall.exit)
+ /* Sections to be discarded */
+ /DISCARD/ : {
+ *(.exitcall.exit)
#ifdef CONFIG_64BIT
- /* temporary hack until binutils is fixed to not emit these
- for static binaries */
- *(.interp)
- *(.dynsym)
- *(.dynstr)
- *(.dynamic)
- *(.hash)
- *(.gnu.hash)
+ /* temporary hack until binutils is fixed to not emit these
+ * for static binaries
+ */
+ *(.interp)
+ *(.dynsym)
+ *(.dynstr)
+ *(.dynamic)
+ *(.hash)
+ *(.gnu.hash)
#endif
}
- STABS_DEBUG
- .note 0 : { *(.note) }
-
+ STABS_DEBUG
+ .note 0 : { *(.note) }
}
lib-y := lusercopy.o bitops.o checksum.o io.o memset.o fixup.o memcpy.o
-obj-y := iomap.o
+obj-y := libgcc/ milli/ iomap.o
--- /dev/null
+obj-y := __ashldi3.o __ashrdi3.o __clzsi2.o __divdi3.o __divsi3.o \
+ __lshrdi3.o __moddi3.o __modsi3.o __udivdi3.o \
+ __udivmoddi4.o __udivmodsi4.o __udivsi3.o \
+ __umoddi3.o __umodsi3.o __muldi3.o __umulsidi3.o
--- /dev/null
+#include "libgcc.h"
+
+u64 __ashldi3(u64 v, int cnt)
+{
+ int c = cnt & 31;
+ u32 vl = (u32) v;
+ u32 vh = (u32) (v >> 32);
+
+ if (cnt & 32) {
+ vh = (vl << c);
+ vl = 0;
+ } else {
+ vh = (vh << c) + (vl >> (32 - c));
+ vl = (vl << c);
+ }
+
+ return ((u64) vh << 32) + vl;
+}
+EXPORT_SYMBOL(__ashldi3);
--- /dev/null
+#include "libgcc.h"
+
+u64 __ashrdi3(u64 v, int cnt)
+{
+ int c = cnt & 31;
+ u32 vl = (u32) v;
+ u32 vh = (u32) (v >> 32);
+
+ if (cnt & 32) {
+ vl = ((s32) vh >> c);
+ vh = (s32) vh >> 31;
+ } else {
+ vl = (vl >> c) + (vh << (32 - c));
+ vh = ((s32) vh >> c);
+ }
+
+ return ((u64) vh << 32) + vl;
+}
+EXPORT_SYMBOL(__ashrdi3);
--- /dev/null
+#include "libgcc.h"
+
+u32 __clzsi2(u32 v)
+{
+ int p = 31;
+
+ if (v & 0xffff0000) {
+ p -= 16;
+ v >>= 16;
+ }
+ if (v & 0xff00) {
+ p -= 8;
+ v >>= 8;
+ }
+ if (v & 0xf0) {
+ p -= 4;
+ v >>= 4;
+ }
+ if (v & 0xc) {
+ p -= 2;
+ v >>= 2;
+ }
+ if (v & 0x2) {
+ p -= 1;
+ v >>= 1;
+ }
+
+ return p;
+}
+EXPORT_SYMBOL(__clzsi2);
--- /dev/null
+#include "libgcc.h"
+
+s64 __divdi3(s64 num, s64 den)
+{
+ int minus = 0;
+ s64 v;
+
+ if (num < 0) {
+ num = -num;
+ minus = 1;
+ }
+ if (den < 0) {
+ den = -den;
+ minus ^= 1;
+ }
+
+ v = __udivmoddi4(num, den, NULL);
+ if (minus)
+ v = -v;
+
+ return v;
+}
+EXPORT_SYMBOL(__divdi3);
--- /dev/null
+#include "libgcc.h"
+
+s32 __divsi3(s32 num, s32 den)
+{
+ int minus = 0;
+ s32 v;
+
+ if (num < 0) {
+ num = -num;
+ minus = 1;
+ }
+ if (den < 0) {
+ den = -den;
+ minus ^= 1;
+ }
+
+ v = __udivmodsi4(num, den, NULL);
+ if (minus)
+ v = -v;
+
+ return v;
+}
+EXPORT_SYMBOL(__divsi3);
--- /dev/null
+#include "libgcc.h"
+
+u64 __lshrdi3(u64 v, int cnt)
+{
+ int c = cnt & 31;
+ u32 vl = (u32) v;
+ u32 vh = (u32) (v >> 32);
+
+ if (cnt & 32) {
+ vl = (vh >> c);
+ vh = 0;
+ } else {
+ vl = (vl >> c) + (vh << (32 - c));
+ vh = (vh >> c);
+ }
+
+ return ((u64) vh << 32) + vl;
+}
+EXPORT_SYMBOL(__lshrdi3);
--- /dev/null
+#include "libgcc.h"
+
+s64 __moddi3(s64 num, s64 den)
+{
+ int minus = 0;
+ s64 v;
+
+ if (num < 0) {
+ num = -num;
+ minus = 1;
+ }
+ if (den < 0) {
+ den = -den;
+ minus ^= 1;
+ }
+
+ (void)__udivmoddi4(num, den, (u64 *) & v);
+ if (minus)
+ v = -v;
+
+ return v;
+}
+EXPORT_SYMBOL(__moddi3);
--- /dev/null
+#include "libgcc.h"
+
+s32 __modsi3(s32 num, s32 den)
+{
+ int minus = 0;
+ s32 v;
+
+ if (num < 0) {
+ num = -num;
+ minus = 1;
+ }
+ if (den < 0) {
+ den = -den;
+ minus ^= 1;
+ }
+
+ (void)__udivmodsi4(num, den, (u32 *) & v);
+ if (minus)
+ v = -v;
+
+ return v;
+}
+EXPORT_SYMBOL(__modsi3);
--- /dev/null
+#include "libgcc.h"
+
+union DWunion {
+ struct {
+ s32 high;
+ s32 low;
+ } s;
+ s64 ll;
+};
+
+s64 __muldi3(s64 u, s64 v)
+{
+ const union DWunion uu = { .ll = u };
+ const union DWunion vv = { .ll = v };
+ union DWunion w = { .ll = __umulsidi3(uu.s.low, vv.s.low) };
+
+ w.s.high += ((u32)uu.s.low * (u32)vv.s.high
+ + (u32)uu.s.high * (u32)vv.s.low);
+
+ return w.ll;
+}
+EXPORT_SYMBOL(__muldi3);
--- /dev/null
+#include "libgcc.h"
+
+u64 __udivdi3(u64 num, u64 den)
+{
+ return __udivmoddi4(num, den, NULL);
+}
+EXPORT_SYMBOL(__udivdi3);
--- /dev/null
+#include "libgcc.h"
+
+u64 __udivmoddi4(u64 num, u64 den, u64 * rem_p)
+{
+ u64 quot = 0, qbit = 1;
+
+ if (den == 0) {
+ BUG();
+ }
+
+ /* Left-justify denominator and count shift */
+ while ((s64) den >= 0) {
+ den <<= 1;
+ qbit <<= 1;
+ }
+
+ while (qbit) {
+ if (den <= num) {
+ num -= den;
+ quot += qbit;
+ }
+ den >>= 1;
+ qbit >>= 1;
+ }
+
+ if (rem_p)
+ *rem_p = num;
+
+ return quot;
+}
+EXPORT_SYMBOL(__udivmoddi4);
--- /dev/null
+#include "libgcc.h"
+
+u32 __udivmodsi4(u32 num, u32 den, u32 * rem_p)
+{
+ u32 quot = 0, qbit = 1;
+
+ if (den == 0) {
+ BUG();
+ }
+
+ /* Left-justify denominator and count shift */
+ while ((s32) den >= 0) {
+ den <<= 1;
+ qbit <<= 1;
+ }
+
+ while (qbit) {
+ if (den <= num) {
+ num -= den;
+ quot += qbit;
+ }
+ den >>= 1;
+ qbit >>= 1;
+ }
+
+ if (rem_p)
+ *rem_p = num;
+
+ return quot;
+}
+EXPORT_SYMBOL(__udivmodsi4);
--- /dev/null
+#include "libgcc.h"
+
+u32 __udivsi3(u32 num, u32 den)
+{
+ return __udivmodsi4(num, den, NULL);
+}
+EXPORT_SYMBOL(__udivsi3);
--- /dev/null
+#include "libgcc.h"
+
+u64 __umoddi3(u64 num, u64 den)
+{
+ u64 v;
+
+ (void)__udivmoddi4(num, den, &v);
+ return v;
+}
+EXPORT_SYMBOL(__umoddi3);
--- /dev/null
+#include "libgcc.h"
+
+u32 __umodsi3(u32 num, u32 den)
+{
+ u32 v;
+
+ (void)__udivmodsi4(num, den, &v);
+ return v;
+}
+EXPORT_SYMBOL(__umodsi3);
--- /dev/null
+#include "libgcc.h"
+
+#define __ll_B ((u32) 1 << (32 / 2))
+#define __ll_lowpart(t) ((u32) (t) & (__ll_B - 1))
+#define __ll_highpart(t) ((u32) (t) >> 16)
+
+#define umul_ppmm(w1, w0, u, v) \
+ do { \
+ u32 __x0, __x1, __x2, __x3; \
+ u16 __ul, __vl, __uh, __vh; \
+ \
+ __ul = __ll_lowpart (u); \
+ __uh = __ll_highpart (u); \
+ __vl = __ll_lowpart (v); \
+ __vh = __ll_highpart (v); \
+ \
+ __x0 = (u32) __ul * __vl; \
+ __x1 = (u32) __ul * __vh; \
+ __x2 = (u32) __uh * __vl; \
+ __x3 = (u32) __uh * __vh; \
+ \
+ __x1 += __ll_highpart (__x0);/* this can't give carry */ \
+ __x1 += __x2; /* but this indeed can */ \
+ if (__x1 < __x2) /* did we get it? */ \
+ __x3 += __ll_B; /* yes, add it in the proper pos. */ \
+ \
+ (w1) = __x3 + __ll_highpart (__x1); \
+ (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \
+ } while (0)
+
+union DWunion {
+ struct {
+ s32 high;
+ s32 low;
+ } s;
+ s64 ll;
+};
+
+u64 __umulsidi3(u32 u, u32 v)
+{
+ union DWunion __w;
+
+ umul_ppmm(__w.s.high, __w.s.low, u, v);
+
+ return __w.ll;
+}
--- /dev/null
+#ifndef _PA_LIBGCC_H_
+#define _PA_LIBGCC_H_
+
+#include <linux/types.h>
+#include <linux/module.h>
+
+/* Cribbed from klibc/libgcc/ */
+u64 __ashldi3(u64 v, int cnt);
+u64 __ashrdi3(u64 v, int cnt);
+
+u32 __clzsi2(u32 v);
+
+s64 __divdi3(s64 num, s64 den);
+s32 __divsi3(s32 num, s32 den);
+
+u64 __lshrdi3(u64 v, int cnt);
+
+s64 __moddi3(s64 num, s64 den);
+s32 __modsi3(s32 num, s32 den);
+
+u64 __udivdi3(u64 num, u64 den);
+u32 __udivsi3(u32 num, u32 den);
+
+u64 __udivmoddi4(u64 num, u64 den, u64 * rem_p);
+u32 __udivmodsi4(u32 num, u32 den, u32 * rem_p);
+
+u64 __umulsidi3(u32 u, u32 v);
+
+u64 __umoddi3(u64 num, u64 den);
+u32 __umodsi3(u32 num, u32 den);
+
+#endif /*_PA_LIBGCC_H_*/
#define stw(_s,_t,_o,_a,_e) def_store_insn(stw,"r",_s,_t,_o,_a,_e)
#ifdef CONFIG_PREFETCH
-extern inline void prefetch_src(const void *addr)
+static inline void prefetch_src(const void *addr)
{
__asm__("ldw 0(" s_space ",%0), %%r0" : : "r" (addr));
}
-extern inline void prefetch_dst(const void *addr)
+static inline void prefetch_dst(const void *addr)
{
__asm__("ldd 0(" d_space ",%0), %%r0" : : "r" (addr));
}
--- /dev/null
+obj-y := dyncall.o divI.o divU.o remI.o remU.o div_const.o mulI.o
--- /dev/null
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+ adapted for gcc by Paul Bame <bame@debian.org>
+ and Alan Modra <alan@linuxcare.com.au>.
+
+ Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+ This file is part of GCC and is released under the terms of
+ of the GNU General Public License as published by the Free Software
+ Foundation; either version 2, or (at your option) any later version.
+ See the file COPYING in the top-level GCC source directory for a copy
+ of the license. */
+
+#include "milli.h"
+
+#ifdef L_divI
+/* ROUTINES: $$divI, $$divoI
+
+ Single precision divide for signed binary integers.
+
+ The quotient is truncated towards zero.
+ The sign of the quotient is the XOR of the signs of the dividend and
+ divisor.
+ Divide by zero is trapped.
+ Divide of -2**31 by -1 is trapped for $$divoI but not for $$divI.
+
+ INPUT REGISTERS:
+ . arg0 == dividend
+ . arg1 == divisor
+ . mrp == return pc
+ . sr0 == return space when called externally
+
+ OUTPUT REGISTERS:
+ . arg0 = undefined
+ . arg1 = undefined
+ . ret1 = quotient
+
+ OTHER REGISTERS AFFECTED:
+ . r1 = undefined
+
+ SIDE EFFECTS:
+ . Causes a trap under the following conditions:
+ . divisor is zero (traps with ADDIT,= 0,25,0)
+ . dividend==-2**31 and divisor==-1 and routine is $$divoI
+ . (traps with ADDO 26,25,0)
+ . Changes memory at the following places:
+ . NONE
+
+ PERMISSIBLE CONTEXT:
+ . Unwindable.
+ . Suitable for internal or external millicode.
+ . Assumes the special millicode register conventions.
+
+ DISCUSSION:
+ . Branchs to other millicode routines using BE
+ . $$div_# for # being 2,3,4,5,6,7,8,9,10,12,14,15
+ .
+ . For selected divisors, calls a divide by constant routine written by
+ . Karl Pettis. Eligible divisors are 1..15 excluding 11 and 13.
+ .
+ . The only overflow case is -2**31 divided by -1.
+ . Both routines return -2**31 but only $$divoI traps. */
+
+RDEFINE(temp,r1)
+RDEFINE(retreg,ret1) /* r29 */
+RDEFINE(temp1,arg0)
+ SUBSPA_MILLI_DIV
+ ATTR_MILLI
+ .import $$divI_2,millicode
+ .import $$divI_3,millicode
+ .import $$divI_4,millicode
+ .import $$divI_5,millicode
+ .import $$divI_6,millicode
+ .import $$divI_7,millicode
+ .import $$divI_8,millicode
+ .import $$divI_9,millicode
+ .import $$divI_10,millicode
+ .import $$divI_12,millicode
+ .import $$divI_14,millicode
+ .import $$divI_15,millicode
+ .export $$divI,millicode
+ .export $$divoI,millicode
+ .proc
+ .callinfo millicode
+ .entry
+GSYM($$divoI)
+ comib,=,n -1,arg1,LREF(negative1) /* when divisor == -1 */
+GSYM($$divI)
+ ldo -1(arg1),temp /* is there at most one bit set ? */
+ and,<> arg1,temp,r0 /* if not, don't use power of 2 divide */
+ addi,> 0,arg1,r0 /* if divisor > 0, use power of 2 divide */
+ b,n LREF(neg_denom)
+LSYM(pow2)
+ addi,>= 0,arg0,retreg /* if numerator is negative, add the */
+ add arg0,temp,retreg /* (denominaotr -1) to correct for shifts */
+ extru,= arg1,15,16,temp /* test denominator with 0xffff0000 */
+ extrs retreg,15,16,retreg /* retreg = retreg >> 16 */
+ or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 16) */
+ ldi 0xcc,temp1 /* setup 0xcc in temp1 */
+ extru,= arg1,23,8,temp /* test denominator with 0xff00 */
+ extrs retreg,23,24,retreg /* retreg = retreg >> 8 */
+ or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 8) */
+ ldi 0xaa,temp /* setup 0xaa in temp */
+ extru,= arg1,27,4,r0 /* test denominator with 0xf0 */
+ extrs retreg,27,28,retreg /* retreg = retreg >> 4 */
+ and,= arg1,temp1,r0 /* test denominator with 0xcc */
+ extrs retreg,29,30,retreg /* retreg = retreg >> 2 */
+ and,= arg1,temp,r0 /* test denominator with 0xaa */
+ extrs retreg,30,31,retreg /* retreg = retreg >> 1 */
+ MILLIRETN
+LSYM(neg_denom)
+ addi,< 0,arg1,r0 /* if arg1 >= 0, it's not power of 2 */
+ b,n LREF(regular_seq)
+ sub r0,arg1,temp /* make denominator positive */
+ comb,=,n arg1,temp,LREF(regular_seq) /* test against 0x80000000 and 0 */
+ ldo -1(temp),retreg /* is there at most one bit set ? */
+ and,= temp,retreg,r0 /* if so, the denominator is power of 2 */
+ b,n LREF(regular_seq)
+ sub r0,arg0,retreg /* negate numerator */
+ comb,=,n arg0,retreg,LREF(regular_seq) /* test against 0x80000000 */
+ copy retreg,arg0 /* set up arg0, arg1 and temp */
+ copy temp,arg1 /* before branching to pow2 */
+ b LREF(pow2)
+ ldo -1(arg1),temp
+LSYM(regular_seq)
+ comib,>>=,n 15,arg1,LREF(small_divisor)
+ add,>= 0,arg0,retreg /* move dividend, if retreg < 0, */
+LSYM(normal)
+ subi 0,retreg,retreg /* make it positive */
+ sub 0,arg1,temp /* clear carry, */
+ /* negate the divisor */
+ ds 0,temp,0 /* set V-bit to the comple- */
+ /* ment of the divisor sign */
+ add retreg,retreg,retreg /* shift msb bit into carry */
+ ds r0,arg1,temp /* 1st divide step, if no carry */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 2nd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 3rd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 4th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 5th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 6th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 7th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 8th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 9th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 10th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 11th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 12th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 13th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 14th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 15th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 16th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 17th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 18th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 19th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 20th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 21st divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 22nd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 23rd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 24th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 25th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 26th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 27th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 28th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 29th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 30th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 31st divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 32nd divide step, */
+ addc retreg,retreg,retreg /* shift last retreg bit into retreg */
+ xor,>= arg0,arg1,0 /* get correct sign of quotient */
+ sub 0,retreg,retreg /* based on operand signs */
+ MILLIRETN
+ nop
+
+LSYM(small_divisor)
+
+#if defined(CONFIG_64BIT)
+/* Clear the upper 32 bits of the arg1 register. We are working with */
+/* small divisors (and 32-bit integers) We must not be mislead */
+/* by "1" bits left in the upper 32 bits. */
+ depd %r0,31,32,%r25
+#endif
+ blr,n arg1,r0
+ nop
+/* table for divisor == 0,1, ... ,15 */
+ addit,= 0,arg1,r0 /* trap if divisor == 0 */
+ nop
+ MILLIRET /* divisor == 1 */
+ copy arg0,retreg
+ MILLI_BEN($$divI_2) /* divisor == 2 */
+ nop
+ MILLI_BEN($$divI_3) /* divisor == 3 */
+ nop
+ MILLI_BEN($$divI_4) /* divisor == 4 */
+ nop
+ MILLI_BEN($$divI_5) /* divisor == 5 */
+ nop
+ MILLI_BEN($$divI_6) /* divisor == 6 */
+ nop
+ MILLI_BEN($$divI_7) /* divisor == 7 */
+ nop
+ MILLI_BEN($$divI_8) /* divisor == 8 */
+ nop
+ MILLI_BEN($$divI_9) /* divisor == 9 */
+ nop
+ MILLI_BEN($$divI_10) /* divisor == 10 */
+ nop
+ b LREF(normal) /* divisor == 11 */
+ add,>= 0,arg0,retreg
+ MILLI_BEN($$divI_12) /* divisor == 12 */
+ nop
+ b LREF(normal) /* divisor == 13 */
+ add,>= 0,arg0,retreg
+ MILLI_BEN($$divI_14) /* divisor == 14 */
+ nop
+ MILLI_BEN($$divI_15) /* divisor == 15 */
+ nop
+
+LSYM(negative1)
+ sub 0,arg0,retreg /* result is negation of dividend */
+ MILLIRET
+ addo arg0,arg1,r0 /* trap iff dividend==0x80000000 && divisor==-1 */
+ .exit
+ .procend
+ .end
+#endif
--- /dev/null
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+ adapted for gcc by Paul Bame <bame@debian.org>
+ and Alan Modra <alan@linuxcare.com.au>.
+
+ Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+ This file is part of GCC and is released under the terms of
+ of the GNU General Public License as published by the Free Software
+ Foundation; either version 2, or (at your option) any later version.
+ See the file COPYING in the top-level GCC source directory for a copy
+ of the license. */
+
+#include "milli.h"
+
+#ifdef L_divU
+/* ROUTINE: $$divU
+ .
+ . Single precision divide for unsigned integers.
+ .
+ . Quotient is truncated towards zero.
+ . Traps on divide by zero.
+
+ INPUT REGISTERS:
+ . arg0 == dividend
+ . arg1 == divisor
+ . mrp == return pc
+ . sr0 == return space when called externally
+
+ OUTPUT REGISTERS:
+ . arg0 = undefined
+ . arg1 = undefined
+ . ret1 = quotient
+
+ OTHER REGISTERS AFFECTED:
+ . r1 = undefined
+
+ SIDE EFFECTS:
+ . Causes a trap under the following conditions:
+ . divisor is zero
+ . Changes memory at the following places:
+ . NONE
+
+ PERMISSIBLE CONTEXT:
+ . Unwindable.
+ . Does not create a stack frame.
+ . Suitable for internal or external millicode.
+ . Assumes the special millicode register conventions.
+
+ DISCUSSION:
+ . Branchs to other millicode routines using BE:
+ . $$divU_# for 3,5,6,7,9,10,12,14,15
+ .
+ . For selected small divisors calls the special divide by constant
+ . routines written by Karl Pettis. These are: 3,5,6,7,9,10,12,14,15. */
+
+RDEFINE(temp,r1)
+RDEFINE(retreg,ret1) /* r29 */
+RDEFINE(temp1,arg0)
+ SUBSPA_MILLI_DIV
+ ATTR_MILLI
+ .export $$divU,millicode
+ .import $$divU_3,millicode
+ .import $$divU_5,millicode
+ .import $$divU_6,millicode
+ .import $$divU_7,millicode
+ .import $$divU_9,millicode
+ .import $$divU_10,millicode
+ .import $$divU_12,millicode
+ .import $$divU_14,millicode
+ .import $$divU_15,millicode
+ .proc
+ .callinfo millicode
+ .entry
+GSYM($$divU)
+/* The subtract is not nullified since it does no harm and can be used
+ by the two cases that branch back to "normal". */
+ ldo -1(arg1),temp /* is there at most one bit set ? */
+ and,= arg1,temp,r0 /* if so, denominator is power of 2 */
+ b LREF(regular_seq)
+ addit,= 0,arg1,0 /* trap for zero dvr */
+ copy arg0,retreg
+ extru,= arg1,15,16,temp /* test denominator with 0xffff0000 */
+ extru retreg,15,16,retreg /* retreg = retreg >> 16 */
+ or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 16) */
+ ldi 0xcc,temp1 /* setup 0xcc in temp1 */
+ extru,= arg1,23,8,temp /* test denominator with 0xff00 */
+ extru retreg,23,24,retreg /* retreg = retreg >> 8 */
+ or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 8) */
+ ldi 0xaa,temp /* setup 0xaa in temp */
+ extru,= arg1,27,4,r0 /* test denominator with 0xf0 */
+ extru retreg,27,28,retreg /* retreg = retreg >> 4 */
+ and,= arg1,temp1,r0 /* test denominator with 0xcc */
+ extru retreg,29,30,retreg /* retreg = retreg >> 2 */
+ and,= arg1,temp,r0 /* test denominator with 0xaa */
+ extru retreg,30,31,retreg /* retreg = retreg >> 1 */
+ MILLIRETN
+ nop
+LSYM(regular_seq)
+ comib,>= 15,arg1,LREF(special_divisor)
+ subi 0,arg1,temp /* clear carry, negate the divisor */
+ ds r0,temp,r0 /* set V-bit to 1 */
+LSYM(normal)
+ add arg0,arg0,retreg /* shift msb bit into carry */
+ ds r0,arg1,temp /* 1st divide step, if no carry */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 2nd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 3rd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 4th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 5th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 6th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 7th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 8th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 9th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 10th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 11th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 12th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 13th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 14th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 15th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 16th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 17th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 18th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 19th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 20th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 21st divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 22nd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 23rd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 24th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 25th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 26th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 27th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 28th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 29th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 30th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 31st divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 32nd divide step, */
+ MILLIRET
+ addc retreg,retreg,retreg /* shift last retreg bit into retreg */
+
+/* Handle the cases where divisor is a small constant or has high bit on. */
+LSYM(special_divisor)
+/* blr arg1,r0 */
+/* comib,>,n 0,arg1,LREF(big_divisor) ; nullify previous instruction */
+
+/* Pratap 8/13/90. The 815 Stirling chip set has a bug that prevents us from
+ generating such a blr, comib sequence. A problem in nullification. So I
+ rewrote this code. */
+
+#if defined(CONFIG_64BIT)
+/* Clear the upper 32 bits of the arg1 register. We are working with
+ small divisors (and 32-bit unsigned integers) We must not be mislead
+ by "1" bits left in the upper 32 bits. */
+ depd %r0,31,32,%r25
+#endif
+ comib,> 0,arg1,LREF(big_divisor)
+ nop
+ blr arg1,r0
+ nop
+
+LSYM(zero_divisor) /* this label is here to provide external visibility */
+ addit,= 0,arg1,0 /* trap for zero dvr */
+ nop
+ MILLIRET /* divisor == 1 */
+ copy arg0,retreg
+ MILLIRET /* divisor == 2 */
+ extru arg0,30,31,retreg
+ MILLI_BEN($$divU_3) /* divisor == 3 */
+ nop
+ MILLIRET /* divisor == 4 */
+ extru arg0,29,30,retreg
+ MILLI_BEN($$divU_5) /* divisor == 5 */
+ nop
+ MILLI_BEN($$divU_6) /* divisor == 6 */
+ nop
+ MILLI_BEN($$divU_7) /* divisor == 7 */
+ nop
+ MILLIRET /* divisor == 8 */
+ extru arg0,28,29,retreg
+ MILLI_BEN($$divU_9) /* divisor == 9 */
+ nop
+ MILLI_BEN($$divU_10) /* divisor == 10 */
+ nop
+ b LREF(normal) /* divisor == 11 */
+ ds r0,temp,r0 /* set V-bit to 1 */
+ MILLI_BEN($$divU_12) /* divisor == 12 */
+ nop
+ b LREF(normal) /* divisor == 13 */
+ ds r0,temp,r0 /* set V-bit to 1 */
+ MILLI_BEN($$divU_14) /* divisor == 14 */
+ nop
+ MILLI_BEN($$divU_15) /* divisor == 15 */
+ nop
+
+/* Handle the case where the high bit is on in the divisor.
+ Compute: if( dividend>=divisor) quotient=1; else quotient=0;
+ Note: dividend>==divisor iff dividend-divisor does not borrow
+ and not borrow iff carry. */
+LSYM(big_divisor)
+ sub arg0,arg1,r0
+ MILLIRET
+ addc r0,r0,retreg
+ .exit
+ .procend
+ .end
+#endif
--- /dev/null
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+ adapted for gcc by Paul Bame <bame@debian.org>
+ and Alan Modra <alan@linuxcare.com.au>.
+
+ Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+ This file is part of GCC and is released under the terms of
+ of the GNU General Public License as published by the Free Software
+ Foundation; either version 2, or (at your option) any later version.
+ See the file COPYING in the top-level GCC source directory for a copy
+ of the license. */
+
+#include "milli.h"
+
+#ifdef L_div_const
+/* ROUTINE: $$divI_2
+ . $$divI_3 $$divU_3
+ . $$divI_4
+ . $$divI_5 $$divU_5
+ . $$divI_6 $$divU_6
+ . $$divI_7 $$divU_7
+ . $$divI_8
+ . $$divI_9 $$divU_9
+ . $$divI_10 $$divU_10
+ .
+ . $$divI_12 $$divU_12
+ .
+ . $$divI_14 $$divU_14
+ . $$divI_15 $$divU_15
+ . $$divI_16
+ . $$divI_17 $$divU_17
+ .
+ . Divide by selected constants for single precision binary integers.
+
+ INPUT REGISTERS:
+ . arg0 == dividend
+ . mrp == return pc
+ . sr0 == return space when called externally
+
+ OUTPUT REGISTERS:
+ . arg0 = undefined
+ . arg1 = undefined
+ . ret1 = quotient
+
+ OTHER REGISTERS AFFECTED:
+ . r1 = undefined
+
+ SIDE EFFECTS:
+ . Causes a trap under the following conditions: NONE
+ . Changes memory at the following places: NONE
+
+ PERMISSIBLE CONTEXT:
+ . Unwindable.
+ . Does not create a stack frame.
+ . Suitable for internal or external millicode.
+ . Assumes the special millicode register conventions.
+
+ DISCUSSION:
+ . Calls other millicode routines using mrp: NONE
+ . Calls other millicode routines: NONE */
+
+
+/* TRUNCATED DIVISION BY SMALL INTEGERS
+
+ We are interested in q(x) = floor(x/y), where x >= 0 and y > 0
+ (with y fixed).
+
+ Let a = floor(z/y), for some choice of z. Note that z will be
+ chosen so that division by z is cheap.
+
+ Let r be the remainder(z/y). In other words, r = z - ay.
+
+ Now, our method is to choose a value for b such that
+
+ q'(x) = floor((ax+b)/z)
+
+ is equal to q(x) over as large a range of x as possible. If the
+ two are equal over a sufficiently large range, and if it is easy to
+ form the product (ax), and it is easy to divide by z, then we can
+ perform the division much faster than the general division algorithm.
+
+ So, we want the following to be true:
+
+ . For x in the following range:
+ .
+ . ky <= x < (k+1)y
+ .
+ . implies that
+ .
+ . k <= (ax+b)/z < (k+1)
+
+ We want to determine b such that this is true for all k in the
+ range {0..K} for some maximum K.
+
+ Since (ax+b) is an increasing function of x, we can take each
+ bound separately to determine the "best" value for b.
+
+ (ax+b)/z < (k+1) implies
+
+ (a((k+1)y-1)+b < (k+1)z implies
+
+ b < a + (k+1)(z-ay) implies
+
+ b < a + (k+1)r
+
+ This needs to be true for all k in the range {0..K}. In
+ particular, it is true for k = 0 and this leads to a maximum
+ acceptable value for b.
+
+ b < a+r or b <= a+r-1
+
+ Taking the other bound, we have
+
+ k <= (ax+b)/z implies
+
+ k <= (aky+b)/z implies
+
+ k(z-ay) <= b implies
+
+ kr <= b
+
+ Clearly, the largest range for k will be achieved by maximizing b,
+ when r is not zero. When r is zero, then the simplest choice for b
+ is 0. When r is not 0, set
+
+ . b = a+r-1
+
+ Now, by construction, q'(x) = floor((ax+b)/z) = q(x) = floor(x/y)
+ for all x in the range:
+
+ . 0 <= x < (K+1)y
+
+ We need to determine what K is. Of our two bounds,
+
+ . b < a+(k+1)r is satisfied for all k >= 0, by construction.
+
+ The other bound is
+
+ . kr <= b
+
+ This is always true if r = 0. If r is not 0 (the usual case), then
+ K = floor((a+r-1)/r), is the maximum value for k.
+
+ Therefore, the formula q'(x) = floor((ax+b)/z) yields the correct
+ answer for q(x) = floor(x/y) when x is in the range
+
+ (0,(K+1)y-1) K = floor((a+r-1)/r)
+
+ To be most useful, we want (K+1)y-1 = (max x) >= 2**32-1 so that
+ the formula for q'(x) yields the correct value of q(x) for all x
+ representable by a single word in HPPA.
+
+ We are also constrained in that computing the product (ax), adding
+ b, and dividing by z must all be done quickly, otherwise we will be
+ better off going through the general algorithm using the DS
+ instruction, which uses approximately 70 cycles.
+
+ For each y, there is a choice of z which satisfies the constraints
+ for (K+1)y >= 2**32. We may not, however, be able to satisfy the
+ timing constraints for arbitrary y. It seems that z being equal to
+ a power of 2 or a power of 2 minus 1 is as good as we can do, since
+ it minimizes the time to do division by z. We want the choice of z
+ to also result in a value for (a) that minimizes the computation of
+ the product (ax). This is best achieved if (a) has a regular bit
+ pattern (so the multiplication can be done with shifts and adds).
+ The value of (a) also needs to be less than 2**32 so the product is
+ always guaranteed to fit in 2 words.
+
+ In actual practice, the following should be done:
+
+ 1) For negative x, you should take the absolute value and remember
+ . the fact so that the result can be negated. This obviously does
+ . not apply in the unsigned case.
+ 2) For even y, you should factor out the power of 2 that divides y
+ . and divide x by it. You can then proceed by dividing by the
+ . odd factor of y.
+
+ Here is a table of some odd values of y, and corresponding choices
+ for z which are "good".
+
+ y z r a (hex) max x (hex)
+
+ 3 2**32 1 55555555 100000001
+ 5 2**32 1 33333333 100000003
+ 7 2**24-1 0 249249 (infinite)
+ 9 2**24-1 0 1c71c7 (infinite)
+ 11 2**20-1 0 1745d (infinite)
+ 13 2**24-1 0 13b13b (infinite)
+ 15 2**32 1 11111111 10000000d
+ 17 2**32 1 f0f0f0f 10000000f
+
+ If r is 1, then b = a+r-1 = a. This simplifies the computation
+ of (ax+b), since you can compute (x+1)(a) instead. If r is 0,
+ then b = 0 is ok to use which simplifies (ax+b).
+
+ The bit patterns for 55555555, 33333333, and 11111111 are obviously
+ very regular. The bit patterns for the other values of a above are:
+
+ y (hex) (binary)
+
+ 7 249249 001001001001001001001001 << regular >>
+ 9 1c71c7 000111000111000111000111 << regular >>
+ 11 1745d 000000010111010001011101 << irregular >>
+ 13 13b13b 000100111011000100111011 << irregular >>
+
+ The bit patterns for (a) corresponding to (y) of 11 and 13 may be
+ too irregular to warrant using this method.
+
+ When z is a power of 2 minus 1, then the division by z is slightly
+ more complicated, involving an iterative solution.
+
+ The code presented here solves division by 1 through 17, except for
+ 11 and 13. There are algorithms for both signed and unsigned
+ quantities given.
+
+ TIMINGS (cycles)
+
+ divisor positive negative unsigned
+
+ . 1 2 2 2
+ . 2 4 4 2
+ . 3 19 21 19
+ . 4 4 4 2
+ . 5 18 22 19
+ . 6 19 22 19
+ . 8 4 4 2
+ . 10 18 19 17
+ . 12 18 20 18
+ . 15 16 18 16
+ . 16 4 4 2
+ . 17 16 18 16
+
+ Now, the algorithm for 7, 9, and 14 is an iterative one. That is,
+ a loop body is executed until the tentative quotient is 0. The
+ number of times the loop body is executed varies depending on the
+ dividend, but is never more than two times. If the dividend is
+ less than the divisor, then the loop body is not executed at all.
+ Each iteration adds 4 cycles to the timings.
+
+ divisor positive negative unsigned
+
+ . 7 19+4n 20+4n 20+4n n = number of iterations
+ . 9 21+4n 22+4n 21+4n
+ . 14 21+4n 22+4n 20+4n
+
+ To give an idea of how the number of iterations varies, here is a
+ table of dividend versus number of iterations when dividing by 7.
+
+ smallest largest required
+ dividend dividend iterations
+
+ . 0 6 0
+ . 7 0x6ffffff 1
+ 0x1000006 0xffffffff 2
+
+ There is some overlap in the range of numbers requiring 1 and 2
+ iterations. */
+
+RDEFINE(t2,r1)
+RDEFINE(x2,arg0) /* r26 */
+RDEFINE(t1,arg1) /* r25 */
+RDEFINE(x1,ret1) /* r29 */
+
+ SUBSPA_MILLI_DIV
+ ATTR_MILLI
+
+ .proc
+ .callinfo millicode
+ .entry
+/* NONE of these routines require a stack frame
+ ALL of these routines are unwindable from millicode */
+
+GSYM($$divide_by_constant)
+ .export $$divide_by_constant,millicode
+/* Provides a "nice" label for the code covered by the unwind descriptor
+ for things like gprof. */
+
+/* DIVISION BY 2 (shift by 1) */
+GSYM($$divI_2)
+ .export $$divI_2,millicode
+ comclr,>= arg0,0,0
+ addi 1,arg0,arg0
+ MILLIRET
+ extrs arg0,30,31,ret1
+
+
+/* DIVISION BY 4 (shift by 2) */
+GSYM($$divI_4)
+ .export $$divI_4,millicode
+ comclr,>= arg0,0,0
+ addi 3,arg0,arg0
+ MILLIRET
+ extrs arg0,29,30,ret1
+
+
+/* DIVISION BY 8 (shift by 3) */
+GSYM($$divI_8)
+ .export $$divI_8,millicode
+ comclr,>= arg0,0,0
+ addi 7,arg0,arg0
+ MILLIRET
+ extrs arg0,28,29,ret1
+
+/* DIVISION BY 16 (shift by 4) */
+GSYM($$divI_16)
+ .export $$divI_16,millicode
+ comclr,>= arg0,0,0
+ addi 15,arg0,arg0
+ MILLIRET
+ extrs arg0,27,28,ret1
+
+/****************************************************************************
+*
+* DIVISION BY DIVISORS OF FFFFFFFF, and powers of 2 times these
+*
+* includes 3,5,15,17 and also 6,10,12
+*
+****************************************************************************/
+
+/* DIVISION BY 3 (use z = 2**32; a = 55555555) */
+
+GSYM($$divI_3)
+ .export $$divI_3,millicode
+ comb,<,N x2,0,LREF(neg3)
+
+ addi 1,x2,x2 /* this cannot overflow */
+ extru x2,1,2,x1 /* multiply by 5 to get started */
+ sh2add x2,x2,x2
+ b LREF(pos)
+ addc x1,0,x1
+
+LSYM(neg3)
+ subi 1,x2,x2 /* this cannot overflow */
+ extru x2,1,2,x1 /* multiply by 5 to get started */
+ sh2add x2,x2,x2
+ b LREF(neg)
+ addc x1,0,x1
+
+GSYM($$divU_3)
+ .export $$divU_3,millicode
+ addi 1,x2,x2 /* this CAN overflow */
+ addc 0,0,x1
+ shd x1,x2,30,t1 /* multiply by 5 to get started */
+ sh2add x2,x2,x2
+ b LREF(pos)
+ addc x1,t1,x1
+
+/* DIVISION BY 5 (use z = 2**32; a = 33333333) */
+
+GSYM($$divI_5)
+ .export $$divI_5,millicode
+ comb,<,N x2,0,LREF(neg5)
+
+ addi 3,x2,t1 /* this cannot overflow */
+ sh1add x2,t1,x2 /* multiply by 3 to get started */
+ b LREF(pos)
+ addc 0,0,x1
+
+LSYM(neg5)
+ sub 0,x2,x2 /* negate x2 */
+ addi 1,x2,x2 /* this cannot overflow */
+ shd 0,x2,31,x1 /* get top bit (can be 1) */
+ sh1add x2,x2,x2 /* multiply by 3 to get started */
+ b LREF(neg)
+ addc x1,0,x1
+
+GSYM($$divU_5)
+ .export $$divU_5,millicode
+ addi 1,x2,x2 /* this CAN overflow */
+ addc 0,0,x1
+ shd x1,x2,31,t1 /* multiply by 3 to get started */
+ sh1add x2,x2,x2
+ b LREF(pos)
+ addc t1,x1,x1
+
+/* DIVISION BY 6 (shift to divide by 2 then divide by 3) */
+GSYM($$divI_6)
+ .export $$divI_6,millicode
+ comb,<,N x2,0,LREF(neg6)
+ extru x2,30,31,x2 /* divide by 2 */
+ addi 5,x2,t1 /* compute 5*(x2+1) = 5*x2+5 */
+ sh2add x2,t1,x2 /* multiply by 5 to get started */
+ b LREF(pos)
+ addc 0,0,x1
+
+LSYM(neg6)
+ subi 2,x2,x2 /* negate, divide by 2, and add 1 */
+ /* negation and adding 1 are done */
+ /* at the same time by the SUBI */
+ extru x2,30,31,x2
+ shd 0,x2,30,x1
+ sh2add x2,x2,x2 /* multiply by 5 to get started */
+ b LREF(neg)
+ addc x1,0,x1
+
+GSYM($$divU_6)
+ .export $$divU_6,millicode
+ extru x2,30,31,x2 /* divide by 2 */
+ addi 1,x2,x2 /* cannot carry */
+ shd 0,x2,30,x1 /* multiply by 5 to get started */
+ sh2add x2,x2,x2
+ b LREF(pos)
+ addc x1,0,x1
+
+/* DIVISION BY 10 (shift to divide by 2 then divide by 5) */
+GSYM($$divU_10)
+ .export $$divU_10,millicode
+ extru x2,30,31,x2 /* divide by 2 */
+ addi 3,x2,t1 /* compute 3*(x2+1) = (3*x2)+3 */
+ sh1add x2,t1,x2 /* multiply by 3 to get started */
+ addc 0,0,x1
+LSYM(pos)
+ shd x1,x2,28,t1 /* multiply by 0x11 */
+ shd x2,0,28,t2
+ add x2,t2,x2
+ addc x1,t1,x1
+LSYM(pos_for_17)
+ shd x1,x2,24,t1 /* multiply by 0x101 */
+ shd x2,0,24,t2
+ add x2,t2,x2
+ addc x1,t1,x1
+
+ shd x1,x2,16,t1 /* multiply by 0x10001 */
+ shd x2,0,16,t2
+ add x2,t2,x2
+ MILLIRET
+ addc x1,t1,x1
+
+GSYM($$divI_10)
+ .export $$divI_10,millicode
+ comb,< x2,0,LREF(neg10)
+ copy 0,x1
+ extru x2,30,31,x2 /* divide by 2 */
+ addib,TR 1,x2,LREF(pos) /* add 1 (cannot overflow) */
+ sh1add x2,x2,x2 /* multiply by 3 to get started */
+
+LSYM(neg10)
+ subi 2,x2,x2 /* negate, divide by 2, and add 1 */
+ /* negation and adding 1 are done */
+ /* at the same time by the SUBI */
+ extru x2,30,31,x2
+ sh1add x2,x2,x2 /* multiply by 3 to get started */
+LSYM(neg)
+ shd x1,x2,28,t1 /* multiply by 0x11 */
+ shd x2,0,28,t2
+ add x2,t2,x2
+ addc x1,t1,x1
+LSYM(neg_for_17)
+ shd x1,x2,24,t1 /* multiply by 0x101 */
+ shd x2,0,24,t2
+ add x2,t2,x2
+ addc x1,t1,x1
+
+ shd x1,x2,16,t1 /* multiply by 0x10001 */
+ shd x2,0,16,t2
+ add x2,t2,x2
+ addc x1,t1,x1
+ MILLIRET
+ sub 0,x1,x1
+
+/* DIVISION BY 12 (shift to divide by 4 then divide by 3) */
+GSYM($$divI_12)
+ .export $$divI_12,millicode
+ comb,< x2,0,LREF(neg12)
+ copy 0,x1
+ extru x2,29,30,x2 /* divide by 4 */
+ addib,tr 1,x2,LREF(pos) /* compute 5*(x2+1) = 5*x2+5 */
+ sh2add x2,x2,x2 /* multiply by 5 to get started */
+
+LSYM(neg12)
+ subi 4,x2,x2 /* negate, divide by 4, and add 1 */
+ /* negation and adding 1 are done */
+ /* at the same time by the SUBI */
+ extru x2,29,30,x2
+ b LREF(neg)
+ sh2add x2,x2,x2 /* multiply by 5 to get started */
+
+GSYM($$divU_12)
+ .export $$divU_12,millicode
+ extru x2,29,30,x2 /* divide by 4 */
+ addi 5,x2,t1 /* cannot carry */
+ sh2add x2,t1,x2 /* multiply by 5 to get started */
+ b LREF(pos)
+ addc 0,0,x1
+
+/* DIVISION BY 15 (use z = 2**32; a = 11111111) */
+GSYM($$divI_15)
+ .export $$divI_15,millicode
+ comb,< x2,0,LREF(neg15)
+ copy 0,x1
+ addib,tr 1,x2,LREF(pos)+4
+ shd x1,x2,28,t1
+
+LSYM(neg15)
+ b LREF(neg)
+ subi 1,x2,x2
+
+GSYM($$divU_15)
+ .export $$divU_15,millicode
+ addi 1,x2,x2 /* this CAN overflow */
+ b LREF(pos)
+ addc 0,0,x1
+
+/* DIVISION BY 17 (use z = 2**32; a = f0f0f0f) */
+GSYM($$divI_17)
+ .export $$divI_17,millicode
+ comb,<,n x2,0,LREF(neg17)
+ addi 1,x2,x2 /* this cannot overflow */
+ shd 0,x2,28,t1 /* multiply by 0xf to get started */
+ shd x2,0,28,t2
+ sub t2,x2,x2
+ b LREF(pos_for_17)
+ subb t1,0,x1
+
+LSYM(neg17)
+ subi 1,x2,x2 /* this cannot overflow */
+ shd 0,x2,28,t1 /* multiply by 0xf to get started */
+ shd x2,0,28,t2
+ sub t2,x2,x2
+ b LREF(neg_for_17)
+ subb t1,0,x1
+
+GSYM($$divU_17)
+ .export $$divU_17,millicode
+ addi 1,x2,x2 /* this CAN overflow */
+ addc 0,0,x1
+ shd x1,x2,28,t1 /* multiply by 0xf to get started */
+LSYM(u17)
+ shd x2,0,28,t2
+ sub t2,x2,x2
+ b LREF(pos_for_17)
+ subb t1,x1,x1
+
+
+/* DIVISION BY DIVISORS OF FFFFFF, and powers of 2 times these
+ includes 7,9 and also 14
+
+
+ z = 2**24-1
+ r = z mod x = 0
+
+ so choose b = 0
+
+ Also, in order to divide by z = 2**24-1, we approximate by dividing
+ by (z+1) = 2**24 (which is easy), and then correcting.
+
+ (ax) = (z+1)q' + r
+ . = zq' + (q'+r)
+
+ So to compute (ax)/z, compute q' = (ax)/(z+1) and r = (ax) mod (z+1)
+ Then the true remainder of (ax)/z is (q'+r). Repeat the process
+ with this new remainder, adding the tentative quotients together,
+ until a tentative quotient is 0 (and then we are done). There is
+ one last correction to be done. It is possible that (q'+r) = z.
+ If so, then (q'+r)/(z+1) = 0 and it looks like we are done. But,
+ in fact, we need to add 1 more to the quotient. Now, it turns
+ out that this happens if and only if the original value x is
+ an exact multiple of y. So, to avoid a three instruction test at
+ the end, instead use 1 instruction to add 1 to x at the beginning. */
+
+/* DIVISION BY 7 (use z = 2**24-1; a = 249249) */
+GSYM($$divI_7)
+ .export $$divI_7,millicode
+ comb,<,n x2,0,LREF(neg7)
+LSYM(7)
+ addi 1,x2,x2 /* cannot overflow */
+ shd 0,x2,29,x1
+ sh3add x2,x2,x2
+ addc x1,0,x1
+LSYM(pos7)
+ shd x1,x2,26,t1
+ shd x2,0,26,t2
+ add x2,t2,x2
+ addc x1,t1,x1
+
+ shd x1,x2,20,t1
+ shd x2,0,20,t2
+ add x2,t2,x2
+ addc x1,t1,t1
+
+ /* computed <t1,x2>. Now divide it by (2**24 - 1) */
+
+ copy 0,x1
+ shd,= t1,x2,24,t1 /* tentative quotient */
+LSYM(1)
+ addb,tr t1,x1,LREF(2) /* add to previous quotient */
+ extru x2,31,24,x2 /* new remainder (unadjusted) */
+
+ MILLIRETN
+
+LSYM(2)
+ addb,tr t1,x2,LREF(1) /* adjust remainder */
+ extru,= x2,7,8,t1 /* new quotient */
+
+LSYM(neg7)
+ subi 1,x2,x2 /* negate x2 and add 1 */
+LSYM(8)
+ shd 0,x2,29,x1
+ sh3add x2,x2,x2
+ addc x1,0,x1
+
+LSYM(neg7_shift)
+ shd x1,x2,26,t1
+ shd x2,0,26,t2
+ add x2,t2,x2
+ addc x1,t1,x1
+
+ shd x1,x2,20,t1
+ shd x2,0,20,t2
+ add x2,t2,x2
+ addc x1,t1,t1
+
+ /* computed <t1,x2>. Now divide it by (2**24 - 1) */
+
+ copy 0,x1
+ shd,= t1,x2,24,t1 /* tentative quotient */
+LSYM(3)
+ addb,tr t1,x1,LREF(4) /* add to previous quotient */
+ extru x2,31,24,x2 /* new remainder (unadjusted) */
+
+ MILLIRET
+ sub 0,x1,x1 /* negate result */
+
+LSYM(4)
+ addb,tr t1,x2,LREF(3) /* adjust remainder */
+ extru,= x2,7,8,t1 /* new quotient */
+
+GSYM($$divU_7)
+ .export $$divU_7,millicode
+ addi 1,x2,x2 /* can carry */
+ addc 0,0,x1
+ shd x1,x2,29,t1
+ sh3add x2,x2,x2
+ b LREF(pos7)
+ addc t1,x1,x1
+
+/* DIVISION BY 9 (use z = 2**24-1; a = 1c71c7) */
+GSYM($$divI_9)
+ .export $$divI_9,millicode
+ comb,<,n x2,0,LREF(neg9)
+ addi 1,x2,x2 /* cannot overflow */
+ shd 0,x2,29,t1
+ shd x2,0,29,t2
+ sub t2,x2,x2
+ b LREF(pos7)
+ subb t1,0,x1
+
+LSYM(neg9)
+ subi 1,x2,x2 /* negate and add 1 */
+ shd 0,x2,29,t1
+ shd x2,0,29,t2
+ sub t2,x2,x2
+ b LREF(neg7_shift)
+ subb t1,0,x1
+
+GSYM($$divU_9)
+ .export $$divU_9,millicode
+ addi 1,x2,x2 /* can carry */
+ addc 0,0,x1
+ shd x1,x2,29,t1
+ shd x2,0,29,t2
+ sub t2,x2,x2
+ b LREF(pos7)
+ subb t1,x1,x1
+
+/* DIVISION BY 14 (shift to divide by 2 then divide by 7) */
+GSYM($$divI_14)
+ .export $$divI_14,millicode
+ comb,<,n x2,0,LREF(neg14)
+GSYM($$divU_14)
+ .export $$divU_14,millicode
+ b LREF(7) /* go to 7 case */
+ extru x2,30,31,x2 /* divide by 2 */
+
+LSYM(neg14)
+ subi 2,x2,x2 /* negate (and add 2) */
+ b LREF(8)
+ extru x2,30,31,x2 /* divide by 2 */
+ .exit
+ .procend
+ .end
+#endif
--- /dev/null
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+ adapted for gcc by Paul Bame <bame@debian.org>
+ and Alan Modra <alan@linuxcare.com.au>.
+
+ Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+ This file is part of GCC and is released under the terms of
+ of the GNU General Public License as published by the Free Software
+ Foundation; either version 2, or (at your option) any later version.
+ See the file COPYING in the top-level GCC source directory for a copy
+ of the license. */
+
+#include "milli.h"
+
+#ifdef L_dyncall
+ SUBSPA_MILLI
+ ATTR_DATA
+GSYM($$dyncall)
+ .export $$dyncall,millicode
+ .proc
+ .callinfo millicode
+ .entry
+ bb,>=,n %r22,30,LREF(1) ; branch if not plabel address
+ depi 0,31,2,%r22 ; clear the two least significant bits
+ ldw 4(%r22),%r19 ; load new LTP value
+ ldw 0(%r22),%r22 ; load address of target
+LSYM(1)
+ bv %r0(%r22) ; branch to the real target
+ stw %r2,-24(%r30) ; save return address into frame marker
+ .exit
+ .procend
+#endif
--- /dev/null
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+ adapted for gcc by Paul Bame <bame@debian.org>
+ and Alan Modra <alan@linuxcare.com.au>.
+
+ Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+ This file is part of GCC and is released under the terms of
+ of the GNU General Public License as published by the Free Software
+ Foundation; either version 2, or (at your option) any later version.
+ See the file COPYING in the top-level GCC source directory for a copy
+ of the license. */
+
+#ifdef CONFIG_64BIT
+ .level 2.0w
+#endif
+
+/* Hardware General Registers. */
+r0: .reg %r0
+r1: .reg %r1
+r2: .reg %r2
+r3: .reg %r3
+r4: .reg %r4
+r5: .reg %r5
+r6: .reg %r6
+r7: .reg %r7
+r8: .reg %r8
+r9: .reg %r9
+r10: .reg %r10
+r11: .reg %r11
+r12: .reg %r12
+r13: .reg %r13
+r14: .reg %r14
+r15: .reg %r15
+r16: .reg %r16
+r17: .reg %r17
+r18: .reg %r18
+r19: .reg %r19
+r20: .reg %r20
+r21: .reg %r21
+r22: .reg %r22
+r23: .reg %r23
+r24: .reg %r24
+r25: .reg %r25
+r26: .reg %r26
+r27: .reg %r27
+r28: .reg %r28
+r29: .reg %r29
+r30: .reg %r30
+r31: .reg %r31
+
+/* Hardware Space Registers. */
+sr0: .reg %sr0
+sr1: .reg %sr1
+sr2: .reg %sr2
+sr3: .reg %sr3
+sr4: .reg %sr4
+sr5: .reg %sr5
+sr6: .reg %sr6
+sr7: .reg %sr7
+
+/* Hardware Floating Point Registers. */
+fr0: .reg %fr0
+fr1: .reg %fr1
+fr2: .reg %fr2
+fr3: .reg %fr3
+fr4: .reg %fr4
+fr5: .reg %fr5
+fr6: .reg %fr6
+fr7: .reg %fr7
+fr8: .reg %fr8
+fr9: .reg %fr9
+fr10: .reg %fr10
+fr11: .reg %fr11
+fr12: .reg %fr12
+fr13: .reg %fr13
+fr14: .reg %fr14
+fr15: .reg %fr15
+
+/* Hardware Control Registers. */
+cr11: .reg %cr11
+sar: .reg %cr11 /* Shift Amount Register */
+
+/* Software Architecture General Registers. */
+rp: .reg r2 /* return pointer */
+#ifdef CONFIG_64BIT
+mrp: .reg r2 /* millicode return pointer */
+#else
+mrp: .reg r31 /* millicode return pointer */
+#endif
+ret0: .reg r28 /* return value */
+ret1: .reg r29 /* return value (high part of double) */
+sp: .reg r30 /* stack pointer */
+dp: .reg r27 /* data pointer */
+arg0: .reg r26 /* argument */
+arg1: .reg r25 /* argument or high part of double argument */
+arg2: .reg r24 /* argument */
+arg3: .reg r23 /* argument or high part of double argument */
+
+/* Software Architecture Space Registers. */
+/* sr0 ; return link from BLE */
+sret: .reg sr1 /* return value */
+sarg: .reg sr1 /* argument */
+/* sr4 ; PC SPACE tracker */
+/* sr5 ; process private data */
+
+/* Frame Offsets (millicode convention!) Used when calling other
+ millicode routines. Stack unwinding is dependent upon these
+ definitions. */
+r31_slot: .equ -20 /* "current RP" slot */
+sr0_slot: .equ -16 /* "static link" slot */
+#if defined(CONFIG_64BIT)
+mrp_slot: .equ -16 /* "current RP" slot */
+psp_slot: .equ -8 /* "previous SP" slot */
+#else
+mrp_slot: .equ -20 /* "current RP" slot (replacing "r31_slot") */
+#endif
+
+
+#define DEFINE(name,value)name: .EQU value
+#define RDEFINE(name,value)name: .REG value
+#ifdef milliext
+#define MILLI_BE(lbl) BE lbl(sr7,r0)
+#define MILLI_BEN(lbl) BE,n lbl(sr7,r0)
+#define MILLI_BLE(lbl) BLE lbl(sr7,r0)
+#define MILLI_BLEN(lbl) BLE,n lbl(sr7,r0)
+#define MILLIRETN BE,n 0(sr0,mrp)
+#define MILLIRET BE 0(sr0,mrp)
+#define MILLI_RETN BE,n 0(sr0,mrp)
+#define MILLI_RET BE 0(sr0,mrp)
+#else
+#define MILLI_BE(lbl) B lbl
+#define MILLI_BEN(lbl) B,n lbl
+#define MILLI_BLE(lbl) BL lbl,mrp
+#define MILLI_BLEN(lbl) BL,n lbl,mrp
+#define MILLIRETN BV,n 0(mrp)
+#define MILLIRET BV 0(mrp)
+#define MILLI_RETN BV,n 0(mrp)
+#define MILLI_RET BV 0(mrp)
+#endif
+
+#define CAT(a,b) a##b
+
+#define SUBSPA_MILLI .section .text
+#define SUBSPA_MILLI_DIV .section .text.div,"ax",@progbits! .align 16
+#define SUBSPA_MILLI_MUL .section .text.mul,"ax",@progbits! .align 16
+#define ATTR_MILLI
+#define SUBSPA_DATA .section .data
+#define ATTR_DATA
+#define GLOBAL $global$
+#define GSYM(sym) !sym:
+#define LSYM(sym) !CAT(.L,sym:)
+#define LREF(sym) CAT(.L,sym)
+
+#ifdef L_dyncall
+ SUBSPA_MILLI
+ ATTR_DATA
+GSYM($$dyncall)
+ .export $$dyncall,millicode
+ .proc
+ .callinfo millicode
+ .entry
+ bb,>=,n %r22,30,LREF(1) ; branch if not plabel address
+ depi 0,31,2,%r22 ; clear the two least significant bits
+ ldw 4(%r22),%r19 ; load new LTP value
+ ldw 0(%r22),%r22 ; load address of target
+LSYM(1)
+ bv %r0(%r22) ; branch to the real target
+ stw %r2,-24(%r30) ; save return address into frame marker
+ .exit
+ .procend
+#endif
+
+#ifdef L_divI
+/* ROUTINES: $$divI, $$divoI
+
+ Single precision divide for signed binary integers.
+
+ The quotient is truncated towards zero.
+ The sign of the quotient is the XOR of the signs of the dividend and
+ divisor.
+ Divide by zero is trapped.
+ Divide of -2**31 by -1 is trapped for $$divoI but not for $$divI.
+
+ INPUT REGISTERS:
+ . arg0 == dividend
+ . arg1 == divisor
+ . mrp == return pc
+ . sr0 == return space when called externally
+
+ OUTPUT REGISTERS:
+ . arg0 = undefined
+ . arg1 = undefined
+ . ret1 = quotient
+
+ OTHER REGISTERS AFFECTED:
+ . r1 = undefined
+
+ SIDE EFFECTS:
+ . Causes a trap under the following conditions:
+ . divisor is zero (traps with ADDIT,= 0,25,0)
+ . dividend==-2**31 and divisor==-1 and routine is $$divoI
+ . (traps with ADDO 26,25,0)
+ . Changes memory at the following places:
+ . NONE
+
+ PERMISSIBLE CONTEXT:
+ . Unwindable.
+ . Suitable for internal or external millicode.
+ . Assumes the special millicode register conventions.
+
+ DISCUSSION:
+ . Branchs to other millicode routines using BE
+ . $$div_# for # being 2,3,4,5,6,7,8,9,10,12,14,15
+ .
+ . For selected divisors, calls a divide by constant routine written by
+ . Karl Pettis. Eligible divisors are 1..15 excluding 11 and 13.
+ .
+ . The only overflow case is -2**31 divided by -1.
+ . Both routines return -2**31 but only $$divoI traps. */
+
+RDEFINE(temp,r1)
+RDEFINE(retreg,ret1) /* r29 */
+RDEFINE(temp1,arg0)
+ SUBSPA_MILLI_DIV
+ ATTR_MILLI
+ .import $$divI_2,millicode
+ .import $$divI_3,millicode
+ .import $$divI_4,millicode
+ .import $$divI_5,millicode
+ .import $$divI_6,millicode
+ .import $$divI_7,millicode
+ .import $$divI_8,millicode
+ .import $$divI_9,millicode
+ .import $$divI_10,millicode
+ .import $$divI_12,millicode
+ .import $$divI_14,millicode
+ .import $$divI_15,millicode
+ .export $$divI,millicode
+ .export $$divoI,millicode
+ .proc
+ .callinfo millicode
+ .entry
+GSYM($$divoI)
+ comib,=,n -1,arg1,LREF(negative1) /* when divisor == -1 */
+GSYM($$divI)
+ ldo -1(arg1),temp /* is there at most one bit set ? */
+ and,<> arg1,temp,r0 /* if not, don't use power of 2 divide */
+ addi,> 0,arg1,r0 /* if divisor > 0, use power of 2 divide */
+ b,n LREF(neg_denom)
+LSYM(pow2)
+ addi,>= 0,arg0,retreg /* if numerator is negative, add the */
+ add arg0,temp,retreg /* (denominaotr -1) to correct for shifts */
+ extru,= arg1,15,16,temp /* test denominator with 0xffff0000 */
+ extrs retreg,15,16,retreg /* retreg = retreg >> 16 */
+ or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 16) */
+ ldi 0xcc,temp1 /* setup 0xcc in temp1 */
+ extru,= arg1,23,8,temp /* test denominator with 0xff00 */
+ extrs retreg,23,24,retreg /* retreg = retreg >> 8 */
+ or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 8) */
+ ldi 0xaa,temp /* setup 0xaa in temp */
+ extru,= arg1,27,4,r0 /* test denominator with 0xf0 */
+ extrs retreg,27,28,retreg /* retreg = retreg >> 4 */
+ and,= arg1,temp1,r0 /* test denominator with 0xcc */
+ extrs retreg,29,30,retreg /* retreg = retreg >> 2 */
+ and,= arg1,temp,r0 /* test denominator with 0xaa */
+ extrs retreg,30,31,retreg /* retreg = retreg >> 1 */
+ MILLIRETN
+LSYM(neg_denom)
+ addi,< 0,arg1,r0 /* if arg1 >= 0, it's not power of 2 */
+ b,n LREF(regular_seq)
+ sub r0,arg1,temp /* make denominator positive */
+ comb,=,n arg1,temp,LREF(regular_seq) /* test against 0x80000000 and 0 */
+ ldo -1(temp),retreg /* is there at most one bit set ? */
+ and,= temp,retreg,r0 /* if so, the denominator is power of 2 */
+ b,n LREF(regular_seq)
+ sub r0,arg0,retreg /* negate numerator */
+ comb,=,n arg0,retreg,LREF(regular_seq) /* test against 0x80000000 */
+ copy retreg,arg0 /* set up arg0, arg1 and temp */
+ copy temp,arg1 /* before branching to pow2 */
+ b LREF(pow2)
+ ldo -1(arg1),temp
+LSYM(regular_seq)
+ comib,>>=,n 15,arg1,LREF(small_divisor)
+ add,>= 0,arg0,retreg /* move dividend, if retreg < 0, */
+LSYM(normal)
+ subi 0,retreg,retreg /* make it positive */
+ sub 0,arg1,temp /* clear carry, */
+ /* negate the divisor */
+ ds 0,temp,0 /* set V-bit to the comple- */
+ /* ment of the divisor sign */
+ add retreg,retreg,retreg /* shift msb bit into carry */
+ ds r0,arg1,temp /* 1st divide step, if no carry */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 2nd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 3rd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 4th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 5th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 6th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 7th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 8th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 9th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 10th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 11th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 12th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 13th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 14th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 15th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 16th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 17th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 18th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 19th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 20th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 21st divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 22nd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 23rd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 24th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 25th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 26th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 27th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 28th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 29th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 30th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 31st divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 32nd divide step, */
+ addc retreg,retreg,retreg /* shift last retreg bit into retreg */
+ xor,>= arg0,arg1,0 /* get correct sign of quotient */
+ sub 0,retreg,retreg /* based on operand signs */
+ MILLIRETN
+ nop
+
+LSYM(small_divisor)
+
+#if defined(CONFIG_64BIT)
+/* Clear the upper 32 bits of the arg1 register. We are working with */
+/* small divisors (and 32-bit integers) We must not be mislead */
+/* by "1" bits left in the upper 32 bits. */
+ depd %r0,31,32,%r25
+#endif
+ blr,n arg1,r0
+ nop
+/* table for divisor == 0,1, ... ,15 */
+ addit,= 0,arg1,r0 /* trap if divisor == 0 */
+ nop
+ MILLIRET /* divisor == 1 */
+ copy arg0,retreg
+ MILLI_BEN($$divI_2) /* divisor == 2 */
+ nop
+ MILLI_BEN($$divI_3) /* divisor == 3 */
+ nop
+ MILLI_BEN($$divI_4) /* divisor == 4 */
+ nop
+ MILLI_BEN($$divI_5) /* divisor == 5 */
+ nop
+ MILLI_BEN($$divI_6) /* divisor == 6 */
+ nop
+ MILLI_BEN($$divI_7) /* divisor == 7 */
+ nop
+ MILLI_BEN($$divI_8) /* divisor == 8 */
+ nop
+ MILLI_BEN($$divI_9) /* divisor == 9 */
+ nop
+ MILLI_BEN($$divI_10) /* divisor == 10 */
+ nop
+ b LREF(normal) /* divisor == 11 */
+ add,>= 0,arg0,retreg
+ MILLI_BEN($$divI_12) /* divisor == 12 */
+ nop
+ b LREF(normal) /* divisor == 13 */
+ add,>= 0,arg0,retreg
+ MILLI_BEN($$divI_14) /* divisor == 14 */
+ nop
+ MILLI_BEN($$divI_15) /* divisor == 15 */
+ nop
+
+LSYM(negative1)
+ sub 0,arg0,retreg /* result is negation of dividend */
+ MILLIRET
+ addo arg0,arg1,r0 /* trap iff dividend==0x80000000 && divisor==-1 */
+ .exit
+ .procend
+ .end
+#endif
+
+#ifdef L_divU
+/* ROUTINE: $$divU
+ .
+ . Single precision divide for unsigned integers.
+ .
+ . Quotient is truncated towards zero.
+ . Traps on divide by zero.
+
+ INPUT REGISTERS:
+ . arg0 == dividend
+ . arg1 == divisor
+ . mrp == return pc
+ . sr0 == return space when called externally
+
+ OUTPUT REGISTERS:
+ . arg0 = undefined
+ . arg1 = undefined
+ . ret1 = quotient
+
+ OTHER REGISTERS AFFECTED:
+ . r1 = undefined
+
+ SIDE EFFECTS:
+ . Causes a trap under the following conditions:
+ . divisor is zero
+ . Changes memory at the following places:
+ . NONE
+
+ PERMISSIBLE CONTEXT:
+ . Unwindable.
+ . Does not create a stack frame.
+ . Suitable for internal or external millicode.
+ . Assumes the special millicode register conventions.
+
+ DISCUSSION:
+ . Branchs to other millicode routines using BE:
+ . $$divU_# for 3,5,6,7,9,10,12,14,15
+ .
+ . For selected small divisors calls the special divide by constant
+ . routines written by Karl Pettis. These are: 3,5,6,7,9,10,12,14,15. */
+
+RDEFINE(temp,r1)
+RDEFINE(retreg,ret1) /* r29 */
+RDEFINE(temp1,arg0)
+ SUBSPA_MILLI_DIV
+ ATTR_MILLI
+ .export $$divU,millicode
+ .import $$divU_3,millicode
+ .import $$divU_5,millicode
+ .import $$divU_6,millicode
+ .import $$divU_7,millicode
+ .import $$divU_9,millicode
+ .import $$divU_10,millicode
+ .import $$divU_12,millicode
+ .import $$divU_14,millicode
+ .import $$divU_15,millicode
+ .proc
+ .callinfo millicode
+ .entry
+GSYM($$divU)
+/* The subtract is not nullified since it does no harm and can be used
+ by the two cases that branch back to "normal". */
+ ldo -1(arg1),temp /* is there at most one bit set ? */
+ and,= arg1,temp,r0 /* if so, denominator is power of 2 */
+ b LREF(regular_seq)
+ addit,= 0,arg1,0 /* trap for zero dvr */
+ copy arg0,retreg
+ extru,= arg1,15,16,temp /* test denominator with 0xffff0000 */
+ extru retreg,15,16,retreg /* retreg = retreg >> 16 */
+ or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 16) */
+ ldi 0xcc,temp1 /* setup 0xcc in temp1 */
+ extru,= arg1,23,8,temp /* test denominator with 0xff00 */
+ extru retreg,23,24,retreg /* retreg = retreg >> 8 */
+ or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 8) */
+ ldi 0xaa,temp /* setup 0xaa in temp */
+ extru,= arg1,27,4,r0 /* test denominator with 0xf0 */
+ extru retreg,27,28,retreg /* retreg = retreg >> 4 */
+ and,= arg1,temp1,r0 /* test denominator with 0xcc */
+ extru retreg,29,30,retreg /* retreg = retreg >> 2 */
+ and,= arg1,temp,r0 /* test denominator with 0xaa */
+ extru retreg,30,31,retreg /* retreg = retreg >> 1 */
+ MILLIRETN
+ nop
+LSYM(regular_seq)
+ comib,>= 15,arg1,LREF(special_divisor)
+ subi 0,arg1,temp /* clear carry, negate the divisor */
+ ds r0,temp,r0 /* set V-bit to 1 */
+LSYM(normal)
+ add arg0,arg0,retreg /* shift msb bit into carry */
+ ds r0,arg1,temp /* 1st divide step, if no carry */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 2nd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 3rd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 4th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 5th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 6th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 7th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 8th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 9th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 10th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 11th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 12th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 13th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 14th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 15th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 16th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 17th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 18th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 19th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 20th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 21st divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 22nd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 23rd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 24th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 25th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 26th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 27th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 28th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 29th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 30th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 31st divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds temp,arg1,temp /* 32nd divide step, */
+ MILLIRET
+ addc retreg,retreg,retreg /* shift last retreg bit into retreg */
+
+/* Handle the cases where divisor is a small constant or has high bit on. */
+LSYM(special_divisor)
+/* blr arg1,r0 */
+/* comib,>,n 0,arg1,LREF(big_divisor) ; nullify previous instruction */
+
+/* Pratap 8/13/90. The 815 Stirling chip set has a bug that prevents us from
+ generating such a blr, comib sequence. A problem in nullification. So I
+ rewrote this code. */
+
+#if defined(CONFIG_64BIT)
+/* Clear the upper 32 bits of the arg1 register. We are working with
+ small divisors (and 32-bit unsigned integers) We must not be mislead
+ by "1" bits left in the upper 32 bits. */
+ depd %r0,31,32,%r25
+#endif
+ comib,> 0,arg1,LREF(big_divisor)
+ nop
+ blr arg1,r0
+ nop
+
+LSYM(zero_divisor) /* this label is here to provide external visibility */
+ addit,= 0,arg1,0 /* trap for zero dvr */
+ nop
+ MILLIRET /* divisor == 1 */
+ copy arg0,retreg
+ MILLIRET /* divisor == 2 */
+ extru arg0,30,31,retreg
+ MILLI_BEN($$divU_3) /* divisor == 3 */
+ nop
+ MILLIRET /* divisor == 4 */
+ extru arg0,29,30,retreg
+ MILLI_BEN($$divU_5) /* divisor == 5 */
+ nop
+ MILLI_BEN($$divU_6) /* divisor == 6 */
+ nop
+ MILLI_BEN($$divU_7) /* divisor == 7 */
+ nop
+ MILLIRET /* divisor == 8 */
+ extru arg0,28,29,retreg
+ MILLI_BEN($$divU_9) /* divisor == 9 */
+ nop
+ MILLI_BEN($$divU_10) /* divisor == 10 */
+ nop
+ b LREF(normal) /* divisor == 11 */
+ ds r0,temp,r0 /* set V-bit to 1 */
+ MILLI_BEN($$divU_12) /* divisor == 12 */
+ nop
+ b LREF(normal) /* divisor == 13 */
+ ds r0,temp,r0 /* set V-bit to 1 */
+ MILLI_BEN($$divU_14) /* divisor == 14 */
+ nop
+ MILLI_BEN($$divU_15) /* divisor == 15 */
+ nop
+
+/* Handle the case where the high bit is on in the divisor.
+ Compute: if( dividend>=divisor) quotient=1; else quotient=0;
+ Note: dividend>==divisor iff dividend-divisor does not borrow
+ and not borrow iff carry. */
+LSYM(big_divisor)
+ sub arg0,arg1,r0
+ MILLIRET
+ addc r0,r0,retreg
+ .exit
+ .procend
+ .end
+#endif
+
+#ifdef L_remI
+/* ROUTINE: $$remI
+
+ DESCRIPTION:
+ . $$remI returns the remainder of the division of two signed 32-bit
+ . integers. The sign of the remainder is the same as the sign of
+ . the dividend.
+
+
+ INPUT REGISTERS:
+ . arg0 == dividend
+ . arg1 == divisor
+ . mrp == return pc
+ . sr0 == return space when called externally
+
+ OUTPUT REGISTERS:
+ . arg0 = destroyed
+ . arg1 = destroyed
+ . ret1 = remainder
+
+ OTHER REGISTERS AFFECTED:
+ . r1 = undefined
+
+ SIDE EFFECTS:
+ . Causes a trap under the following conditions: DIVIDE BY ZERO
+ . Changes memory at the following places: NONE
+
+ PERMISSIBLE CONTEXT:
+ . Unwindable
+ . Does not create a stack frame
+ . Is usable for internal or external microcode
+
+ DISCUSSION:
+ . Calls other millicode routines via mrp: NONE
+ . Calls other millicode routines: NONE */
+
+RDEFINE(tmp,r1)
+RDEFINE(retreg,ret1)
+
+ SUBSPA_MILLI
+ ATTR_MILLI
+ .proc
+ .callinfo millicode
+ .entry
+GSYM($$remI)
+GSYM($$remoI)
+ .export $$remI,MILLICODE
+ .export $$remoI,MILLICODE
+ ldo -1(arg1),tmp /* is there at most one bit set ? */
+ and,<> arg1,tmp,r0 /* if not, don't use power of 2 */
+ addi,> 0,arg1,r0 /* if denominator > 0, use power */
+ /* of 2 */
+ b,n LREF(neg_denom)
+LSYM(pow2)
+ comb,>,n 0,arg0,LREF(neg_num) /* is numerator < 0 ? */
+ and arg0,tmp,retreg /* get the result */
+ MILLIRETN
+LSYM(neg_num)
+ subi 0,arg0,arg0 /* negate numerator */
+ and arg0,tmp,retreg /* get the result */
+ subi 0,retreg,retreg /* negate result */
+ MILLIRETN
+LSYM(neg_denom)
+ addi,< 0,arg1,r0 /* if arg1 >= 0, it's not power */
+ /* of 2 */
+ b,n LREF(regular_seq)
+ sub r0,arg1,tmp /* make denominator positive */
+ comb,=,n arg1,tmp,LREF(regular_seq) /* test against 0x80000000 and 0 */
+ ldo -1(tmp),retreg /* is there at most one bit set ? */
+ and,= tmp,retreg,r0 /* if not, go to regular_seq */
+ b,n LREF(regular_seq)
+ comb,>,n 0,arg0,LREF(neg_num_2) /* if arg0 < 0, negate it */
+ and arg0,retreg,retreg
+ MILLIRETN
+LSYM(neg_num_2)
+ subi 0,arg0,tmp /* test against 0x80000000 */
+ and tmp,retreg,retreg
+ subi 0,retreg,retreg
+ MILLIRETN
+LSYM(regular_seq)
+ addit,= 0,arg1,0 /* trap if div by zero */
+ add,>= 0,arg0,retreg /* move dividend, if retreg < 0, */
+ sub 0,retreg,retreg /* make it positive */
+ sub 0,arg1, tmp /* clear carry, */
+ /* negate the divisor */
+ ds 0, tmp,0 /* set V-bit to the comple- */
+ /* ment of the divisor sign */
+ or 0,0, tmp /* clear tmp */
+ add retreg,retreg,retreg /* shift msb bit into carry */
+ ds tmp,arg1, tmp /* 1st divide step, if no carry */
+ /* out, msb of quotient = 0 */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+LSYM(t1)
+ ds tmp,arg1, tmp /* 2nd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 3rd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 4th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 5th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 6th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 7th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 8th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 9th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 10th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 11th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 12th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 13th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 14th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 15th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 16th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 17th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 18th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 19th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 20th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 21st divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 22nd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 23rd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 24th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 25th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 26th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 27th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 28th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 29th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 30th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 31st divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 32nd divide step, */
+ addc retreg,retreg,retreg /* shift last bit into retreg */
+ movb,>=,n tmp,retreg,LREF(finish) /* branch if pos. tmp */
+ add,< arg1,0,0 /* if arg1 > 0, add arg1 */
+ add,tr tmp,arg1,retreg /* for correcting remainder tmp */
+ sub tmp,arg1,retreg /* else add absolute value arg1 */
+LSYM(finish)
+ add,>= arg0,0,0 /* set sign of remainder */
+ sub 0,retreg,retreg /* to sign of dividend */
+ MILLIRET
+ nop
+ .exit
+ .procend
+#ifdef milliext
+ .origin 0x00000200
+#endif
+ .end
+#endif
+
+#ifdef L_remU
+/* ROUTINE: $$remU
+ . Single precision divide for remainder with unsigned binary integers.
+ .
+ . The remainder must be dividend-(dividend/divisor)*divisor.
+ . Divide by zero is trapped.
+
+ INPUT REGISTERS:
+ . arg0 == dividend
+ . arg1 == divisor
+ . mrp == return pc
+ . sr0 == return space when called externally
+
+ OUTPUT REGISTERS:
+ . arg0 = undefined
+ . arg1 = undefined
+ . ret1 = remainder
+
+ OTHER REGISTERS AFFECTED:
+ . r1 = undefined
+
+ SIDE EFFECTS:
+ . Causes a trap under the following conditions: DIVIDE BY ZERO
+ . Changes memory at the following places: NONE
+
+ PERMISSIBLE CONTEXT:
+ . Unwindable.
+ . Does not create a stack frame.
+ . Suitable for internal or external millicode.
+ . Assumes the special millicode register conventions.
+
+ DISCUSSION:
+ . Calls other millicode routines using mrp: NONE
+ . Calls other millicode routines: NONE */
+
+
+RDEFINE(temp,r1)
+RDEFINE(rmndr,ret1) /* r29 */
+ SUBSPA_MILLI
+ ATTR_MILLI
+ .export $$remU,millicode
+ .proc
+ .callinfo millicode
+ .entry
+GSYM($$remU)
+ ldo -1(arg1),temp /* is there at most one bit set ? */
+ and,= arg1,temp,r0 /* if not, don't use power of 2 */
+ b LREF(regular_seq)
+ addit,= 0,arg1,r0 /* trap on div by zero */
+ and arg0,temp,rmndr /* get the result for power of 2 */
+ MILLIRETN
+LSYM(regular_seq)
+ comib,>=,n 0,arg1,LREF(special_case)
+ subi 0,arg1,rmndr /* clear carry, negate the divisor */
+ ds r0,rmndr,r0 /* set V-bit to 1 */
+ add arg0,arg0,temp /* shift msb bit into carry */
+ ds r0,arg1,rmndr /* 1st divide step, if no carry */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 2nd divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 3rd divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 4th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 5th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 6th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 7th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 8th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 9th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 10th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 11th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 12th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 13th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 14th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 15th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 16th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 17th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 18th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 19th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 20th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 21st divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 22nd divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 23rd divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 24th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 25th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 26th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 27th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 28th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 29th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 30th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 31st divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 32nd divide step, */
+ comiclr,<= 0,rmndr,r0
+ add rmndr,arg1,rmndr /* correction */
+ MILLIRETN
+ nop
+
+/* Putting >= on the last DS and deleting COMICLR does not work! */
+LSYM(special_case)
+ sub,>>= arg0,arg1,rmndr
+ copy arg0,rmndr
+ MILLIRETN
+ nop
+ .exit
+ .procend
+ .end
+#endif
+
+#ifdef L_div_const
+/* ROUTINE: $$divI_2
+ . $$divI_3 $$divU_3
+ . $$divI_4
+ . $$divI_5 $$divU_5
+ . $$divI_6 $$divU_6
+ . $$divI_7 $$divU_7
+ . $$divI_8
+ . $$divI_9 $$divU_9
+ . $$divI_10 $$divU_10
+ .
+ . $$divI_12 $$divU_12
+ .
+ . $$divI_14 $$divU_14
+ . $$divI_15 $$divU_15
+ . $$divI_16
+ . $$divI_17 $$divU_17
+ .
+ . Divide by selected constants for single precision binary integers.
+
+ INPUT REGISTERS:
+ . arg0 == dividend
+ . mrp == return pc
+ . sr0 == return space when called externally
+
+ OUTPUT REGISTERS:
+ . arg0 = undefined
+ . arg1 = undefined
+ . ret1 = quotient
+
+ OTHER REGISTERS AFFECTED:
+ . r1 = undefined
+
+ SIDE EFFECTS:
+ . Causes a trap under the following conditions: NONE
+ . Changes memory at the following places: NONE
+
+ PERMISSIBLE CONTEXT:
+ . Unwindable.
+ . Does not create a stack frame.
+ . Suitable for internal or external millicode.
+ . Assumes the special millicode register conventions.
+
+ DISCUSSION:
+ . Calls other millicode routines using mrp: NONE
+ . Calls other millicode routines: NONE */
+
+
+/* TRUNCATED DIVISION BY SMALL INTEGERS
+
+ We are interested in q(x) = floor(x/y), where x >= 0 and y > 0
+ (with y fixed).
+
+ Let a = floor(z/y), for some choice of z. Note that z will be
+ chosen so that division by z is cheap.
+
+ Let r be the remainder(z/y). In other words, r = z - ay.
+
+ Now, our method is to choose a value for b such that
+
+ q'(x) = floor((ax+b)/z)
+
+ is equal to q(x) over as large a range of x as possible. If the
+ two are equal over a sufficiently large range, and if it is easy to
+ form the product (ax), and it is easy to divide by z, then we can
+ perform the division much faster than the general division algorithm.
+
+ So, we want the following to be true:
+
+ . For x in the following range:
+ .
+ . ky <= x < (k+1)y
+ .
+ . implies that
+ .
+ . k <= (ax+b)/z < (k+1)
+
+ We want to determine b such that this is true for all k in the
+ range {0..K} for some maximum K.
+
+ Since (ax+b) is an increasing function of x, we can take each
+ bound separately to determine the "best" value for b.
+
+ (ax+b)/z < (k+1) implies
+
+ (a((k+1)y-1)+b < (k+1)z implies
+
+ b < a + (k+1)(z-ay) implies
+
+ b < a + (k+1)r
+
+ This needs to be true for all k in the range {0..K}. In
+ particular, it is true for k = 0 and this leads to a maximum
+ acceptable value for b.
+
+ b < a+r or b <= a+r-1
+
+ Taking the other bound, we have
+
+ k <= (ax+b)/z implies
+
+ k <= (aky+b)/z implies
+
+ k(z-ay) <= b implies
+
+ kr <= b
+
+ Clearly, the largest range for k will be achieved by maximizing b,
+ when r is not zero. When r is zero, then the simplest choice for b
+ is 0. When r is not 0, set
+
+ . b = a+r-1
+
+ Now, by construction, q'(x) = floor((ax+b)/z) = q(x) = floor(x/y)
+ for all x in the range:
+
+ . 0 <= x < (K+1)y
+
+ We need to determine what K is. Of our two bounds,
+
+ . b < a+(k+1)r is satisfied for all k >= 0, by construction.
+
+ The other bound is
+
+ . kr <= b
+
+ This is always true if r = 0. If r is not 0 (the usual case), then
+ K = floor((a+r-1)/r), is the maximum value for k.
+
+ Therefore, the formula q'(x) = floor((ax+b)/z) yields the correct
+ answer for q(x) = floor(x/y) when x is in the range
+
+ (0,(K+1)y-1) K = floor((a+r-1)/r)
+
+ To be most useful, we want (K+1)y-1 = (max x) >= 2**32-1 so that
+ the formula for q'(x) yields the correct value of q(x) for all x
+ representable by a single word in HPPA.
+
+ We are also constrained in that computing the product (ax), adding
+ b, and dividing by z must all be done quickly, otherwise we will be
+ better off going through the general algorithm using the DS
+ instruction, which uses approximately 70 cycles.
+
+ For each y, there is a choice of z which satisfies the constraints
+ for (K+1)y >= 2**32. We may not, however, be able to satisfy the
+ timing constraints for arbitrary y. It seems that z being equal to
+ a power of 2 or a power of 2 minus 1 is as good as we can do, since
+ it minimizes the time to do division by z. We want the choice of z
+ to also result in a value for (a) that minimizes the computation of
+ the product (ax). This is best achieved if (a) has a regular bit
+ pattern (so the multiplication can be done with shifts and adds).
+ The value of (a) also needs to be less than 2**32 so the product is
+ always guaranteed to fit in 2 words.
+
+ In actual practice, the following should be done:
+
+ 1) For negative x, you should take the absolute value and remember
+ . the fact so that the result can be negated. This obviously does
+ . not apply in the unsigned case.
+ 2) For even y, you should factor out the power of 2 that divides y
+ . and divide x by it. You can then proceed by dividing by the
+ . odd factor of y.
+
+ Here is a table of some odd values of y, and corresponding choices
+ for z which are "good".
+
+ y z r a (hex) max x (hex)
+
+ 3 2**32 1 55555555 100000001
+ 5 2**32 1 33333333 100000003
+ 7 2**24-1 0 249249 (infinite)
+ 9 2**24-1 0 1c71c7 (infinite)
+ 11 2**20-1 0 1745d (infinite)
+ 13 2**24-1 0 13b13b (infinite)
+ 15 2**32 1 11111111 10000000d
+ 17 2**32 1 f0f0f0f 10000000f
+
+ If r is 1, then b = a+r-1 = a. This simplifies the computation
+ of (ax+b), since you can compute (x+1)(a) instead. If r is 0,
+ then b = 0 is ok to use which simplifies (ax+b).
+
+ The bit patterns for 55555555, 33333333, and 11111111 are obviously
+ very regular. The bit patterns for the other values of a above are:
+
+ y (hex) (binary)
+
+ 7 249249 001001001001001001001001 << regular >>
+ 9 1c71c7 000111000111000111000111 << regular >>
+ 11 1745d 000000010111010001011101 << irregular >>
+ 13 13b13b 000100111011000100111011 << irregular >>
+
+ The bit patterns for (a) corresponding to (y) of 11 and 13 may be
+ too irregular to warrant using this method.
+
+ When z is a power of 2 minus 1, then the division by z is slightly
+ more complicated, involving an iterative solution.
+
+ The code presented here solves division by 1 through 17, except for
+ 11 and 13. There are algorithms for both signed and unsigned
+ quantities given.
+
+ TIMINGS (cycles)
+
+ divisor positive negative unsigned
+
+ . 1 2 2 2
+ . 2 4 4 2
+ . 3 19 21 19
+ . 4 4 4 2
+ . 5 18 22 19
+ . 6 19 22 19
+ . 8 4 4 2
+ . 10 18 19 17
+ . 12 18 20 18
+ . 15 16 18 16
+ . 16 4 4 2
+ . 17 16 18 16
+
+ Now, the algorithm for 7, 9, and 14 is an iterative one. That is,
+ a loop body is executed until the tentative quotient is 0. The
+ number of times the loop body is executed varies depending on the
+ dividend, but is never more than two times. If the dividend is
+ less than the divisor, then the loop body is not executed at all.
+ Each iteration adds 4 cycles to the timings.
+
+ divisor positive negative unsigned
+
+ . 7 19+4n 20+4n 20+4n n = number of iterations
+ . 9 21+4n 22+4n 21+4n
+ . 14 21+4n 22+4n 20+4n
+
+ To give an idea of how the number of iterations varies, here is a
+ table of dividend versus number of iterations when dividing by 7.
+
+ smallest largest required
+ dividend dividend iterations
+
+ . 0 6 0
+ . 7 0x6ffffff 1
+ 0x1000006 0xffffffff 2
+
+ There is some overlap in the range of numbers requiring 1 and 2
+ iterations. */
+
+RDEFINE(t2,r1)
+RDEFINE(x2,arg0) /* r26 */
+RDEFINE(t1,arg1) /* r25 */
+RDEFINE(x1,ret1) /* r29 */
+
+ SUBSPA_MILLI_DIV
+ ATTR_MILLI
+
+ .proc
+ .callinfo millicode
+ .entry
+/* NONE of these routines require a stack frame
+ ALL of these routines are unwindable from millicode */
+
+GSYM($$divide_by_constant)
+ .export $$divide_by_constant,millicode
+/* Provides a "nice" label for the code covered by the unwind descriptor
+ for things like gprof. */
+
+/* DIVISION BY 2 (shift by 1) */
+GSYM($$divI_2)
+ .export $$divI_2,millicode
+ comclr,>= arg0,0,0
+ addi 1,arg0,arg0
+ MILLIRET
+ extrs arg0,30,31,ret1
+
+
+/* DIVISION BY 4 (shift by 2) */
+GSYM($$divI_4)
+ .export $$divI_4,millicode
+ comclr,>= arg0,0,0
+ addi 3,arg0,arg0
+ MILLIRET
+ extrs arg0,29,30,ret1
+
+
+/* DIVISION BY 8 (shift by 3) */
+GSYM($$divI_8)
+ .export $$divI_8,millicode
+ comclr,>= arg0,0,0
+ addi 7,arg0,arg0
+ MILLIRET
+ extrs arg0,28,29,ret1
+
+/* DIVISION BY 16 (shift by 4) */
+GSYM($$divI_16)
+ .export $$divI_16,millicode
+ comclr,>= arg0,0,0
+ addi 15,arg0,arg0
+ MILLIRET
+ extrs arg0,27,28,ret1
+
+/****************************************************************************
+*
+* DIVISION BY DIVISORS OF FFFFFFFF, and powers of 2 times these
+*
+* includes 3,5,15,17 and also 6,10,12
+*
+****************************************************************************/
+
+/* DIVISION BY 3 (use z = 2**32; a = 55555555) */
+
+GSYM($$divI_3)
+ .export $$divI_3,millicode
+ comb,<,N x2,0,LREF(neg3)
+
+ addi 1,x2,x2 /* this cannot overflow */
+ extru x2,1,2,x1 /* multiply by 5 to get started */
+ sh2add x2,x2,x2
+ b LREF(pos)
+ addc x1,0,x1
+
+LSYM(neg3)
+ subi 1,x2,x2 /* this cannot overflow */
+ extru x2,1,2,x1 /* multiply by 5 to get started */
+ sh2add x2,x2,x2
+ b LREF(neg)
+ addc x1,0,x1
+
+GSYM($$divU_3)
+ .export $$divU_3,millicode
+ addi 1,x2,x2 /* this CAN overflow */
+ addc 0,0,x1
+ shd x1,x2,30,t1 /* multiply by 5 to get started */
+ sh2add x2,x2,x2
+ b LREF(pos)
+ addc x1,t1,x1
+
+/* DIVISION BY 5 (use z = 2**32; a = 33333333) */
+
+GSYM($$divI_5)
+ .export $$divI_5,millicode
+ comb,<,N x2,0,LREF(neg5)
+
+ addi 3,x2,t1 /* this cannot overflow */
+ sh1add x2,t1,x2 /* multiply by 3 to get started */
+ b LREF(pos)
+ addc 0,0,x1
+
+LSYM(neg5)
+ sub 0,x2,x2 /* negate x2 */
+ addi 1,x2,x2 /* this cannot overflow */
+ shd 0,x2,31,x1 /* get top bit (can be 1) */
+ sh1add x2,x2,x2 /* multiply by 3 to get started */
+ b LREF(neg)
+ addc x1,0,x1
+
+GSYM($$divU_5)
+ .export $$divU_5,millicode
+ addi 1,x2,x2 /* this CAN overflow */
+ addc 0,0,x1
+ shd x1,x2,31,t1 /* multiply by 3 to get started */
+ sh1add x2,x2,x2
+ b LREF(pos)
+ addc t1,x1,x1
+
+/* DIVISION BY 6 (shift to divide by 2 then divide by 3) */
+GSYM($$divI_6)
+ .export $$divI_6,millicode
+ comb,<,N x2,0,LREF(neg6)
+ extru x2,30,31,x2 /* divide by 2 */
+ addi 5,x2,t1 /* compute 5*(x2+1) = 5*x2+5 */
+ sh2add x2,t1,x2 /* multiply by 5 to get started */
+ b LREF(pos)
+ addc 0,0,x1
+
+LSYM(neg6)
+ subi 2,x2,x2 /* negate, divide by 2, and add 1 */
+ /* negation and adding 1 are done */
+ /* at the same time by the SUBI */
+ extru x2,30,31,x2
+ shd 0,x2,30,x1
+ sh2add x2,x2,x2 /* multiply by 5 to get started */
+ b LREF(neg)
+ addc x1,0,x1
+
+GSYM($$divU_6)
+ .export $$divU_6,millicode
+ extru x2,30,31,x2 /* divide by 2 */
+ addi 1,x2,x2 /* cannot carry */
+ shd 0,x2,30,x1 /* multiply by 5 to get started */
+ sh2add x2,x2,x2
+ b LREF(pos)
+ addc x1,0,x1
+
+/* DIVISION BY 10 (shift to divide by 2 then divide by 5) */
+GSYM($$divU_10)
+ .export $$divU_10,millicode
+ extru x2,30,31,x2 /* divide by 2 */
+ addi 3,x2,t1 /* compute 3*(x2+1) = (3*x2)+3 */
+ sh1add x2,t1,x2 /* multiply by 3 to get started */
+ addc 0,0,x1
+LSYM(pos)
+ shd x1,x2,28,t1 /* multiply by 0x11 */
+ shd x2,0,28,t2
+ add x2,t2,x2
+ addc x1,t1,x1
+LSYM(pos_for_17)
+ shd x1,x2,24,t1 /* multiply by 0x101 */
+ shd x2,0,24,t2
+ add x2,t2,x2
+ addc x1,t1,x1
+
+ shd x1,x2,16,t1 /* multiply by 0x10001 */
+ shd x2,0,16,t2
+ add x2,t2,x2
+ MILLIRET
+ addc x1,t1,x1
+
+GSYM($$divI_10)
+ .export $$divI_10,millicode
+ comb,< x2,0,LREF(neg10)
+ copy 0,x1
+ extru x2,30,31,x2 /* divide by 2 */
+ addib,TR 1,x2,LREF(pos) /* add 1 (cannot overflow) */
+ sh1add x2,x2,x2 /* multiply by 3 to get started */
+
+LSYM(neg10)
+ subi 2,x2,x2 /* negate, divide by 2, and add 1 */
+ /* negation and adding 1 are done */
+ /* at the same time by the SUBI */
+ extru x2,30,31,x2
+ sh1add x2,x2,x2 /* multiply by 3 to get started */
+LSYM(neg)
+ shd x1,x2,28,t1 /* multiply by 0x11 */
+ shd x2,0,28,t2
+ add x2,t2,x2
+ addc x1,t1,x1
+LSYM(neg_for_17)
+ shd x1,x2,24,t1 /* multiply by 0x101 */
+ shd x2,0,24,t2
+ add x2,t2,x2
+ addc x1,t1,x1
+
+ shd x1,x2,16,t1 /* multiply by 0x10001 */
+ shd x2,0,16,t2
+ add x2,t2,x2
+ addc x1,t1,x1
+ MILLIRET
+ sub 0,x1,x1
+
+/* DIVISION BY 12 (shift to divide by 4 then divide by 3) */
+GSYM($$divI_12)
+ .export $$divI_12,millicode
+ comb,< x2,0,LREF(neg12)
+ copy 0,x1
+ extru x2,29,30,x2 /* divide by 4 */
+ addib,tr 1,x2,LREF(pos) /* compute 5*(x2+1) = 5*x2+5 */
+ sh2add x2,x2,x2 /* multiply by 5 to get started */
+
+LSYM(neg12)
+ subi 4,x2,x2 /* negate, divide by 4, and add 1 */
+ /* negation and adding 1 are done */
+ /* at the same time by the SUBI */
+ extru x2,29,30,x2
+ b LREF(neg)
+ sh2add x2,x2,x2 /* multiply by 5 to get started */
+
+GSYM($$divU_12)
+ .export $$divU_12,millicode
+ extru x2,29,30,x2 /* divide by 4 */
+ addi 5,x2,t1 /* cannot carry */
+ sh2add x2,t1,x2 /* multiply by 5 to get started */
+ b LREF(pos)
+ addc 0,0,x1
+
+/* DIVISION BY 15 (use z = 2**32; a = 11111111) */
+GSYM($$divI_15)
+ .export $$divI_15,millicode
+ comb,< x2,0,LREF(neg15)
+ copy 0,x1
+ addib,tr 1,x2,LREF(pos)+4
+ shd x1,x2,28,t1
+
+LSYM(neg15)
+ b LREF(neg)
+ subi 1,x2,x2
+
+GSYM($$divU_15)
+ .export $$divU_15,millicode
+ addi 1,x2,x2 /* this CAN overflow */
+ b LREF(pos)
+ addc 0,0,x1
+
+/* DIVISION BY 17 (use z = 2**32; a = f0f0f0f) */
+GSYM($$divI_17)
+ .export $$divI_17,millicode
+ comb,<,n x2,0,LREF(neg17)
+ addi 1,x2,x2 /* this cannot overflow */
+ shd 0,x2,28,t1 /* multiply by 0xf to get started */
+ shd x2,0,28,t2
+ sub t2,x2,x2
+ b LREF(pos_for_17)
+ subb t1,0,x1
+
+LSYM(neg17)
+ subi 1,x2,x2 /* this cannot overflow */
+ shd 0,x2,28,t1 /* multiply by 0xf to get started */
+ shd x2,0,28,t2
+ sub t2,x2,x2
+ b LREF(neg_for_17)
+ subb t1,0,x1
+
+GSYM($$divU_17)
+ .export $$divU_17,millicode
+ addi 1,x2,x2 /* this CAN overflow */
+ addc 0,0,x1
+ shd x1,x2,28,t1 /* multiply by 0xf to get started */
+LSYM(u17)
+ shd x2,0,28,t2
+ sub t2,x2,x2
+ b LREF(pos_for_17)
+ subb t1,x1,x1
+
+
+/* DIVISION BY DIVISORS OF FFFFFF, and powers of 2 times these
+ includes 7,9 and also 14
+
+
+ z = 2**24-1
+ r = z mod x = 0
+
+ so choose b = 0
+
+ Also, in order to divide by z = 2**24-1, we approximate by dividing
+ by (z+1) = 2**24 (which is easy), and then correcting.
+
+ (ax) = (z+1)q' + r
+ . = zq' + (q'+r)
+
+ So to compute (ax)/z, compute q' = (ax)/(z+1) and r = (ax) mod (z+1)
+ Then the true remainder of (ax)/z is (q'+r). Repeat the process
+ with this new remainder, adding the tentative quotients together,
+ until a tentative quotient is 0 (and then we are done). There is
+ one last correction to be done. It is possible that (q'+r) = z.
+ If so, then (q'+r)/(z+1) = 0 and it looks like we are done. But,
+ in fact, we need to add 1 more to the quotient. Now, it turns
+ out that this happens if and only if the original value x is
+ an exact multiple of y. So, to avoid a three instruction test at
+ the end, instead use 1 instruction to add 1 to x at the beginning. */
+
+/* DIVISION BY 7 (use z = 2**24-1; a = 249249) */
+GSYM($$divI_7)
+ .export $$divI_7,millicode
+ comb,<,n x2,0,LREF(neg7)
+LSYM(7)
+ addi 1,x2,x2 /* cannot overflow */
+ shd 0,x2,29,x1
+ sh3add x2,x2,x2
+ addc x1,0,x1
+LSYM(pos7)
+ shd x1,x2,26,t1
+ shd x2,0,26,t2
+ add x2,t2,x2
+ addc x1,t1,x1
+
+ shd x1,x2,20,t1
+ shd x2,0,20,t2
+ add x2,t2,x2
+ addc x1,t1,t1
+
+ /* computed <t1,x2>. Now divide it by (2**24 - 1) */
+
+ copy 0,x1
+ shd,= t1,x2,24,t1 /* tentative quotient */
+LSYM(1)
+ addb,tr t1,x1,LREF(2) /* add to previous quotient */
+ extru x2,31,24,x2 /* new remainder (unadjusted) */
+
+ MILLIRETN
+
+LSYM(2)
+ addb,tr t1,x2,LREF(1) /* adjust remainder */
+ extru,= x2,7,8,t1 /* new quotient */
+
+LSYM(neg7)
+ subi 1,x2,x2 /* negate x2 and add 1 */
+LSYM(8)
+ shd 0,x2,29,x1
+ sh3add x2,x2,x2
+ addc x1,0,x1
+
+LSYM(neg7_shift)
+ shd x1,x2,26,t1
+ shd x2,0,26,t2
+ add x2,t2,x2
+ addc x1,t1,x1
+
+ shd x1,x2,20,t1
+ shd x2,0,20,t2
+ add x2,t2,x2
+ addc x1,t1,t1
+
+ /* computed <t1,x2>. Now divide it by (2**24 - 1) */
+
+ copy 0,x1
+ shd,= t1,x2,24,t1 /* tentative quotient */
+LSYM(3)
+ addb,tr t1,x1,LREF(4) /* add to previous quotient */
+ extru x2,31,24,x2 /* new remainder (unadjusted) */
+
+ MILLIRET
+ sub 0,x1,x1 /* negate result */
+
+LSYM(4)
+ addb,tr t1,x2,LREF(3) /* adjust remainder */
+ extru,= x2,7,8,t1 /* new quotient */
+
+GSYM($$divU_7)
+ .export $$divU_7,millicode
+ addi 1,x2,x2 /* can carry */
+ addc 0,0,x1
+ shd x1,x2,29,t1
+ sh3add x2,x2,x2
+ b LREF(pos7)
+ addc t1,x1,x1
+
+/* DIVISION BY 9 (use z = 2**24-1; a = 1c71c7) */
+GSYM($$divI_9)
+ .export $$divI_9,millicode
+ comb,<,n x2,0,LREF(neg9)
+ addi 1,x2,x2 /* cannot overflow */
+ shd 0,x2,29,t1
+ shd x2,0,29,t2
+ sub t2,x2,x2
+ b LREF(pos7)
+ subb t1,0,x1
+
+LSYM(neg9)
+ subi 1,x2,x2 /* negate and add 1 */
+ shd 0,x2,29,t1
+ shd x2,0,29,t2
+ sub t2,x2,x2
+ b LREF(neg7_shift)
+ subb t1,0,x1
+
+GSYM($$divU_9)
+ .export $$divU_9,millicode
+ addi 1,x2,x2 /* can carry */
+ addc 0,0,x1
+ shd x1,x2,29,t1
+ shd x2,0,29,t2
+ sub t2,x2,x2
+ b LREF(pos7)
+ subb t1,x1,x1
+
+/* DIVISION BY 14 (shift to divide by 2 then divide by 7) */
+GSYM($$divI_14)
+ .export $$divI_14,millicode
+ comb,<,n x2,0,LREF(neg14)
+GSYM($$divU_14)
+ .export $$divU_14,millicode
+ b LREF(7) /* go to 7 case */
+ extru x2,30,31,x2 /* divide by 2 */
+
+LSYM(neg14)
+ subi 2,x2,x2 /* negate (and add 2) */
+ b LREF(8)
+ extru x2,30,31,x2 /* divide by 2 */
+ .exit
+ .procend
+ .end
+#endif
+
+#ifdef L_mulI
+/* VERSION "@(#)$$mulI $ Revision: 12.4 $ $ Date: 94/03/17 17:18:51 $" */
+/******************************************************************************
+This routine is used on PA2.0 processors when gcc -mno-fpregs is used
+
+ROUTINE: $$mulI
+
+
+DESCRIPTION:
+
+ $$mulI multiplies two single word integers, giving a single
+ word result.
+
+
+INPUT REGISTERS:
+
+ arg0 = Operand 1
+ arg1 = Operand 2
+ r31 == return pc
+ sr0 == return space when called externally
+
+
+OUTPUT REGISTERS:
+
+ arg0 = undefined
+ arg1 = undefined
+ ret1 = result
+
+OTHER REGISTERS AFFECTED:
+
+ r1 = undefined
+
+SIDE EFFECTS:
+
+ Causes a trap under the following conditions: NONE
+ Changes memory at the following places: NONE
+
+PERMISSIBLE CONTEXT:
+
+ Unwindable
+ Does not create a stack frame
+ Is usable for internal or external microcode
+
+DISCUSSION:
+
+ Calls other millicode routines via mrp: NONE
+ Calls other millicode routines: NONE
+
+***************************************************************************/
+
+
+#define a0 %arg0
+#define a1 %arg1
+#define t0 %r1
+#define r %ret1
+
+#define a0__128a0 zdep a0,24,25,a0
+#define a0__256a0 zdep a0,23,24,a0
+#define a1_ne_0_b_l0 comb,<> a1,0,LREF(l0)
+#define a1_ne_0_b_l1 comb,<> a1,0,LREF(l1)
+#define a1_ne_0_b_l2 comb,<> a1,0,LREF(l2)
+#define b_n_ret_t0 b,n LREF(ret_t0)
+#define b_e_shift b LREF(e_shift)
+#define b_e_t0ma0 b LREF(e_t0ma0)
+#define b_e_t0 b LREF(e_t0)
+#define b_e_t0a0 b LREF(e_t0a0)
+#define b_e_t02a0 b LREF(e_t02a0)
+#define b_e_t04a0 b LREF(e_t04a0)
+#define b_e_2t0 b LREF(e_2t0)
+#define b_e_2t0a0 b LREF(e_2t0a0)
+#define b_e_2t04a0 b LREF(e2t04a0)
+#define b_e_3t0 b LREF(e_3t0)
+#define b_e_4t0 b LREF(e_4t0)
+#define b_e_4t0a0 b LREF(e_4t0a0)
+#define b_e_4t08a0 b LREF(e4t08a0)
+#define b_e_5t0 b LREF(e_5t0)
+#define b_e_8t0 b LREF(e_8t0)
+#define b_e_8t0a0 b LREF(e_8t0a0)
+#define r__r_a0 add r,a0,r
+#define r__r_2a0 sh1add a0,r,r
+#define r__r_4a0 sh2add a0,r,r
+#define r__r_8a0 sh3add a0,r,r
+#define r__r_t0 add r,t0,r
+#define r__r_2t0 sh1add t0,r,r
+#define r__r_4t0 sh2add t0,r,r
+#define r__r_8t0 sh3add t0,r,r
+#define t0__3a0 sh1add a0,a0,t0
+#define t0__4a0 sh2add a0,0,t0
+#define t0__5a0 sh2add a0,a0,t0
+#define t0__8a0 sh3add a0,0,t0
+#define t0__9a0 sh3add a0,a0,t0
+#define t0__16a0 zdep a0,27,28,t0
+#define t0__32a0 zdep a0,26,27,t0
+#define t0__64a0 zdep a0,25,26,t0
+#define t0__128a0 zdep a0,24,25,t0
+#define t0__t0ma0 sub t0,a0,t0
+#define t0__t0_a0 add t0,a0,t0
+#define t0__t0_2a0 sh1add a0,t0,t0
+#define t0__t0_4a0 sh2add a0,t0,t0
+#define t0__t0_8a0 sh3add a0,t0,t0
+#define t0__2t0_a0 sh1add t0,a0,t0
+#define t0__3t0 sh1add t0,t0,t0
+#define t0__4t0 sh2add t0,0,t0
+#define t0__4t0_a0 sh2add t0,a0,t0
+#define t0__5t0 sh2add t0,t0,t0
+#define t0__8t0 sh3add t0,0,t0
+#define t0__8t0_a0 sh3add t0,a0,t0
+#define t0__9t0 sh3add t0,t0,t0
+#define t0__16t0 zdep t0,27,28,t0
+#define t0__32t0 zdep t0,26,27,t0
+#define t0__256a0 zdep a0,23,24,t0
+
+
+ SUBSPA_MILLI
+ ATTR_MILLI
+ .align 16
+ .proc
+ .callinfo millicode
+ .export $$mulI,millicode
+GSYM($$mulI)
+ combt,<<= a1,a0,LREF(l4) /* swap args if unsigned a1>a0 */
+ copy 0,r /* zero out the result */
+ xor a0,a1,a0 /* swap a0 & a1 using the */
+ xor a0,a1,a1 /* old xor trick */
+ xor a0,a1,a0
+LSYM(l4)
+ combt,<= 0,a0,LREF(l3) /* if a0>=0 then proceed like unsigned */
+ zdep a1,30,8,t0 /* t0 = (a1&0xff)<<1 ********* */
+ sub,> 0,a1,t0 /* otherwise negate both and */
+ combt,<=,n a0,t0,LREF(l2) /* swap back if |a0|<|a1| */
+ sub 0,a0,a1
+ movb,tr,n t0,a0,LREF(l2) /* 10th inst. */
+
+LSYM(l0) r__r_t0 /* add in this partial product */
+LSYM(l1) a0__256a0 /* a0 <<= 8 ****************** */
+LSYM(l2) zdep a1,30,8,t0 /* t0 = (a1&0xff)<<1 ********* */
+LSYM(l3) blr t0,0 /* case on these 8 bits ****** */
+ extru a1,23,24,a1 /* a1 >>= 8 ****************** */
+
+/*16 insts before this. */
+/* a0 <<= 8 ************************** */
+LSYM(x0) a1_ne_0_b_l2 ! a0__256a0 ! MILLIRETN ! nop
+LSYM(x1) a1_ne_0_b_l1 ! r__r_a0 ! MILLIRETN ! nop
+LSYM(x2) a1_ne_0_b_l1 ! r__r_2a0 ! MILLIRETN ! nop
+LSYM(x3) a1_ne_0_b_l0 ! t0__3a0 ! MILLIRET ! r__r_t0
+LSYM(x4) a1_ne_0_b_l1 ! r__r_4a0 ! MILLIRETN ! nop
+LSYM(x5) a1_ne_0_b_l0 ! t0__5a0 ! MILLIRET ! r__r_t0
+LSYM(x6) t0__3a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
+LSYM(x7) t0__3a0 ! a1_ne_0_b_l0 ! r__r_4a0 ! b_n_ret_t0
+LSYM(x8) a1_ne_0_b_l1 ! r__r_8a0 ! MILLIRETN ! nop
+LSYM(x9) a1_ne_0_b_l0 ! t0__9a0 ! MILLIRET ! r__r_t0
+LSYM(x10) t0__5a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
+LSYM(x11) t0__3a0 ! a1_ne_0_b_l0 ! r__r_8a0 ! b_n_ret_t0
+LSYM(x12) t0__3a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
+LSYM(x13) t0__5a0 ! a1_ne_0_b_l0 ! r__r_8a0 ! b_n_ret_t0
+LSYM(x14) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x15) t0__5a0 ! a1_ne_0_b_l0 ! t0__3t0 ! b_n_ret_t0
+LSYM(x16) t0__16a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
+LSYM(x17) t0__9a0 ! a1_ne_0_b_l0 ! t0__t0_8a0 ! b_n_ret_t0
+LSYM(x18) t0__9a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
+LSYM(x19) t0__9a0 ! a1_ne_0_b_l0 ! t0__2t0_a0 ! b_n_ret_t0
+LSYM(x20) t0__5a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
+LSYM(x21) t0__5a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
+LSYM(x22) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x23) t0__5a0 ! t0__2t0_a0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x24) t0__3a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
+LSYM(x25) t0__5a0 ! a1_ne_0_b_l0 ! t0__5t0 ! b_n_ret_t0
+LSYM(x26) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x27) t0__3a0 ! a1_ne_0_b_l0 ! t0__9t0 ! b_n_ret_t0
+LSYM(x28) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x29) t0__3a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x30) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_2t0
+LSYM(x31) t0__32a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
+LSYM(x32) t0__32a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
+LSYM(x33) t0__8a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
+LSYM(x34) t0__16a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x35) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__t0_8a0
+LSYM(x36) t0__9a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
+LSYM(x37) t0__9a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
+LSYM(x38) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x39) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x40) t0__5a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
+LSYM(x41) t0__5a0 ! a1_ne_0_b_l0 ! t0__8t0_a0 ! b_n_ret_t0
+LSYM(x42) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x43) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x44) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x45) t0__9a0 ! a1_ne_0_b_l0 ! t0__5t0 ! b_n_ret_t0
+LSYM(x46) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_a0
+LSYM(x47) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_2a0
+LSYM(x48) t0__3a0 ! a1_ne_0_b_l0 ! t0__16t0 ! b_n_ret_t0
+LSYM(x49) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_4a0
+LSYM(x50) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_2t0
+LSYM(x51) t0__9a0 ! t0__t0_8a0 ! b_e_t0 ! t0__3t0
+LSYM(x52) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x53) t0__3a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x54) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_2t0
+LSYM(x55) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x56) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
+LSYM(x57) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__3t0
+LSYM(x58) t0__3a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
+LSYM(x59) t0__9a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__3t0
+LSYM(x60) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
+LSYM(x61) t0__5a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x62) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
+LSYM(x63) t0__64a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
+LSYM(x64) t0__64a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
+LSYM(x65) t0__8a0 ! a1_ne_0_b_l0 ! t0__8t0_a0 ! b_n_ret_t0
+LSYM(x66) t0__32a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x67) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x68) t0__8a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x69) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x70) t0__64a0 ! t0__t0_4a0 ! b_e_t0 ! t0__t0_2a0
+LSYM(x71) t0__9a0 ! t0__8t0 ! b_e_t0 ! t0__t0ma0
+LSYM(x72) t0__9a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
+LSYM(x73) t0__9a0 ! t0__8t0_a0 ! b_e_shift ! r__r_t0
+LSYM(x74) t0__9a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x75) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x76) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x77) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x78) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__2t0_a0
+LSYM(x79) t0__16a0 ! t0__5t0 ! b_e_t0 ! t0__t0ma0
+LSYM(x80) t0__16a0 ! t0__5t0 ! b_e_shift ! r__r_t0
+LSYM(x81) t0__9a0 ! t0__9t0 ! b_e_shift ! r__r_t0
+LSYM(x82) t0__5a0 ! t0__8t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x83) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x84) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x85) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__5t0
+LSYM(x86) t0__5a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
+LSYM(x87) t0__9a0 ! t0__9t0 ! b_e_t02a0 ! t0__t0_4a0
+LSYM(x88) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
+LSYM(x89) t0__5a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x90) t0__9a0 ! t0__5t0 ! b_e_shift ! r__r_2t0
+LSYM(x91) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x92) t0__5a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__2t0_a0
+LSYM(x93) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__3t0
+LSYM(x94) t0__9a0 ! t0__5t0 ! b_e_2t0 ! t0__t0_2a0
+LSYM(x95) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__5t0
+LSYM(x96) t0__8a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
+LSYM(x97) t0__8a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x98) t0__32a0 ! t0__3t0 ! b_e_t0 ! t0__t0_2a0
+LSYM(x99) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__3t0
+LSYM(x100) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_4t0
+LSYM(x101) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x102) t0__32a0 ! t0__t0_2a0 ! b_e_t0 ! t0__3t0
+LSYM(x103) t0__5a0 ! t0__5t0 ! b_e_t02a0 ! t0__4t0_a0
+LSYM(x104) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_8t0
+LSYM(x105) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
+LSYM(x106) t0__3a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__4t0_a0
+LSYM(x107) t0__9a0 ! t0__t0_4a0 ! b_e_t02a0 ! t0__8t0_a0
+LSYM(x108) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
+LSYM(x109) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x110) t0__9a0 ! t0__3t0 ! b_e_2t0 ! t0__2t0_a0
+LSYM(x111) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__3t0
+LSYM(x112) t0__3a0 ! t0__2t0_a0 ! b_e_t0 ! t0__16t0
+LSYM(x113) t0__9a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__3t0
+LSYM(x114) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__3t0
+LSYM(x115) t0__9a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__3t0
+LSYM(x116) t0__3a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__4t0_a0
+LSYM(x117) t0__3a0 ! t0__4t0_a0 ! b_e_t0 ! t0__9t0
+LSYM(x118) t0__3a0 ! t0__4t0_a0 ! b_e_t0a0 ! t0__9t0
+LSYM(x119) t0__3a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__9t0
+LSYM(x120) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
+LSYM(x121) t0__5a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x122) t0__5a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
+LSYM(x123) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
+LSYM(x124) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_4t0
+LSYM(x125) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__5t0
+LSYM(x126) t0__64a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
+LSYM(x127) t0__128a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
+LSYM(x128) t0__128a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
+LSYM(x129) t0__128a0 ! a1_ne_0_b_l0 ! t0__t0_a0 ! b_n_ret_t0
+LSYM(x130) t0__64a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x131) t0__8a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x132) t0__8a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x133) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x134) t0__8a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
+LSYM(x135) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__3t0
+LSYM(x136) t0__8a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
+LSYM(x137) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x138) t0__8a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
+LSYM(x139) t0__8a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__4t0_a0
+LSYM(x140) t0__3a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__5t0
+LSYM(x141) t0__8a0 ! t0__2t0_a0 ! b_e_4t0a0 ! t0__2t0_a0
+LSYM(x142) t0__9a0 ! t0__8t0 ! b_e_2t0 ! t0__t0ma0
+LSYM(x143) t0__16a0 ! t0__9t0 ! b_e_t0 ! t0__t0ma0
+LSYM(x144) t0__9a0 ! t0__8t0 ! b_e_shift ! r__r_2t0
+LSYM(x145) t0__9a0 ! t0__8t0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x146) t0__9a0 ! t0__8t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x147) t0__9a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x148) t0__9a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x149) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x150) t0__9a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
+LSYM(x151) t0__9a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__2t0_a0
+LSYM(x152) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
+LSYM(x153) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x154) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
+LSYM(x155) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__5t0
+LSYM(x156) t0__9a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__2t0_a0
+LSYM(x157) t0__32a0 ! t0__t0ma0 ! b_e_t02a0 ! t0__5t0
+LSYM(x158) t0__16a0 ! t0__5t0 ! b_e_2t0 ! t0__t0ma0
+LSYM(x159) t0__32a0 ! t0__5t0 ! b_e_t0 ! t0__t0ma0
+LSYM(x160) t0__5a0 ! t0__4t0 ! b_e_shift ! r__r_8t0
+LSYM(x161) t0__8a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x162) t0__9a0 ! t0__9t0 ! b_e_shift ! r__r_2t0
+LSYM(x163) t0__9a0 ! t0__9t0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x164) t0__5a0 ! t0__8t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x165) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
+LSYM(x166) t0__5a0 ! t0__8t0_a0 ! b_e_2t0 ! t0__2t0_a0
+LSYM(x167) t0__5a0 ! t0__8t0_a0 ! b_e_2t0a0 ! t0__2t0_a0
+LSYM(x168) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_8t0
+LSYM(x169) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x170) t0__32a0 ! t0__t0_2a0 ! b_e_t0 ! t0__5t0
+LSYM(x171) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__9t0
+LSYM(x172) t0__5a0 ! t0__4t0_a0 ! b_e_4t0 ! t0__2t0_a0
+LSYM(x173) t0__9a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__9t0
+LSYM(x174) t0__32a0 ! t0__t0_2a0 ! b_e_t04a0 ! t0__5t0
+LSYM(x175) t0__8a0 ! t0__2t0_a0 ! b_e_5t0 ! t0__2t0_a0
+LSYM(x176) t0__5a0 ! t0__4t0_a0 ! b_e_8t0 ! t0__t0_a0
+LSYM(x177) t0__5a0 ! t0__4t0_a0 ! b_e_8t0a0 ! t0__t0_a0
+LSYM(x178) t0__5a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__8t0_a0
+LSYM(x179) t0__5a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__8t0_a0
+LSYM(x180) t0__9a0 ! t0__5t0 ! b_e_shift ! r__r_4t0
+LSYM(x181) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x182) t0__9a0 ! t0__5t0 ! b_e_2t0 ! t0__2t0_a0
+LSYM(x183) t0__9a0 ! t0__5t0 ! b_e_2t0a0 ! t0__2t0_a0
+LSYM(x184) t0__5a0 ! t0__9t0 ! b_e_4t0 ! t0__t0_a0
+LSYM(x185) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
+LSYM(x186) t0__32a0 ! t0__t0ma0 ! b_e_2t0 ! t0__3t0
+LSYM(x187) t0__9a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__5t0
+LSYM(x188) t0__9a0 ! t0__5t0 ! b_e_4t0 ! t0__t0_2a0
+LSYM(x189) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__9t0
+LSYM(x190) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__5t0
+LSYM(x191) t0__64a0 ! t0__3t0 ! b_e_t0 ! t0__t0ma0
+LSYM(x192) t0__8a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
+LSYM(x193) t0__8a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x194) t0__8a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
+LSYM(x195) t0__8a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
+LSYM(x196) t0__8a0 ! t0__3t0 ! b_e_4t0 ! t0__2t0_a0
+LSYM(x197) t0__8a0 ! t0__3t0 ! b_e_4t0a0 ! t0__2t0_a0
+LSYM(x198) t0__64a0 ! t0__t0_2a0 ! b_e_t0 ! t0__3t0
+LSYM(x199) t0__8a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__3t0
+LSYM(x200) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_8t0
+LSYM(x201) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x202) t0__5a0 ! t0__5t0 ! b_e_2t0 ! t0__4t0_a0
+LSYM(x203) t0__5a0 ! t0__5t0 ! b_e_2t0a0 ! t0__4t0_a0
+LSYM(x204) t0__8a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__3t0
+LSYM(x205) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__5t0
+LSYM(x206) t0__64a0 ! t0__t0_4a0 ! b_e_t02a0 ! t0__3t0
+LSYM(x207) t0__8a0 ! t0__2t0_a0 ! b_e_3t0 ! t0__4t0_a0
+LSYM(x208) t0__5a0 ! t0__5t0 ! b_e_8t0 ! t0__t0_a0
+LSYM(x209) t0__5a0 ! t0__5t0 ! b_e_8t0a0 ! t0__t0_a0
+LSYM(x210) t0__5a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__5t0
+LSYM(x211) t0__5a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__5t0
+LSYM(x212) t0__3a0 ! t0__4t0_a0 ! b_e_4t0 ! t0__4t0_a0
+LSYM(x213) t0__3a0 ! t0__4t0_a0 ! b_e_4t0a0 ! t0__4t0_a0
+LSYM(x214) t0__9a0 ! t0__t0_4a0 ! b_e_2t04a0 ! t0__8t0_a0
+LSYM(x215) t0__5a0 ! t0__4t0_a0 ! b_e_5t0 ! t0__2t0_a0
+LSYM(x216) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
+LSYM(x217) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x218) t0__9a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
+LSYM(x219) t0__9a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
+LSYM(x220) t0__3a0 ! t0__9t0 ! b_e_4t0 ! t0__2t0_a0
+LSYM(x221) t0__3a0 ! t0__9t0 ! b_e_4t0a0 ! t0__2t0_a0
+LSYM(x222) t0__9a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__3t0
+LSYM(x223) t0__9a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__3t0
+LSYM(x224) t0__9a0 ! t0__3t0 ! b_e_8t0 ! t0__t0_a0
+LSYM(x225) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__5t0
+LSYM(x226) t0__3a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__32t0
+LSYM(x227) t0__9a0 ! t0__5t0 ! b_e_t02a0 ! t0__5t0
+LSYM(x228) t0__9a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__3t0
+LSYM(x229) t0__9a0 ! t0__2t0_a0 ! b_e_4t0a0 ! t0__3t0
+LSYM(x230) t0__9a0 ! t0__5t0 ! b_e_5t0 ! t0__t0_a0
+LSYM(x231) t0__9a0 ! t0__2t0_a0 ! b_e_3t0 ! t0__4t0_a0
+LSYM(x232) t0__3a0 ! t0__2t0_a0 ! b_e_8t0 ! t0__4t0_a0
+LSYM(x233) t0__3a0 ! t0__2t0_a0 ! b_e_8t0a0 ! t0__4t0_a0
+LSYM(x234) t0__3a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__9t0
+LSYM(x235) t0__3a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__9t0
+LSYM(x236) t0__9a0 ! t0__2t0_a0 ! b_e_4t08a0 ! t0__3t0
+LSYM(x237) t0__16a0 ! t0__5t0 ! b_e_3t0 ! t0__t0ma0
+LSYM(x238) t0__3a0 ! t0__4t0_a0 ! b_e_2t04a0 ! t0__9t0
+LSYM(x239) t0__16a0 ! t0__5t0 ! b_e_t0ma0 ! t0__3t0
+LSYM(x240) t0__9a0 ! t0__t0_a0 ! b_e_8t0 ! t0__3t0
+LSYM(x241) t0__9a0 ! t0__t0_a0 ! b_e_8t0a0 ! t0__3t0
+LSYM(x242) t0__5a0 ! t0__3t0 ! b_e_2t0 ! t0__8t0_a0
+LSYM(x243) t0__9a0 ! t0__9t0 ! b_e_t0 ! t0__3t0
+LSYM(x244) t0__5a0 ! t0__3t0 ! b_e_4t0 ! t0__4t0_a0
+LSYM(x245) t0__8a0 ! t0__3t0 ! b_e_5t0 ! t0__2t0_a0
+LSYM(x246) t0__5a0 ! t0__8t0_a0 ! b_e_2t0 ! t0__3t0
+LSYM(x247) t0__5a0 ! t0__8t0_a0 ! b_e_2t0a0 ! t0__3t0
+LSYM(x248) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_8t0
+LSYM(x249) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x250) t0__5a0 ! t0__5t0 ! b_e_2t0 ! t0__5t0
+LSYM(x251) t0__5a0 ! t0__5t0 ! b_e_2t0a0 ! t0__5t0
+LSYM(x252) t0__64a0 ! t0__t0ma0 ! b_e_shift ! r__r_4t0
+LSYM(x253) t0__64a0 ! t0__t0ma0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x254) t0__128a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
+LSYM(x255) t0__256a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
+/*1040 insts before this. */
+LSYM(ret_t0) MILLIRET
+LSYM(e_t0) r__r_t0
+LSYM(e_shift) a1_ne_0_b_l2
+ a0__256a0 /* a0 <<= 8 *********** */
+ MILLIRETN
+LSYM(e_t0ma0) a1_ne_0_b_l0
+ t0__t0ma0
+ MILLIRET
+ r__r_t0
+LSYM(e_t0a0) a1_ne_0_b_l0
+ t0__t0_a0
+ MILLIRET
+ r__r_t0
+LSYM(e_t02a0) a1_ne_0_b_l0
+ t0__t0_2a0
+ MILLIRET
+ r__r_t0
+LSYM(e_t04a0) a1_ne_0_b_l0
+ t0__t0_4a0
+ MILLIRET
+ r__r_t0
+LSYM(e_2t0) a1_ne_0_b_l1
+ r__r_2t0
+ MILLIRETN
+LSYM(e_2t0a0) a1_ne_0_b_l0
+ t0__2t0_a0
+ MILLIRET
+ r__r_t0
+LSYM(e2t04a0) t0__t0_2a0
+ a1_ne_0_b_l1
+ r__r_2t0
+ MILLIRETN
+LSYM(e_3t0) a1_ne_0_b_l0
+ t0__3t0
+ MILLIRET
+ r__r_t0
+LSYM(e_4t0) a1_ne_0_b_l1
+ r__r_4t0
+ MILLIRETN
+LSYM(e_4t0a0) a1_ne_0_b_l0
+ t0__4t0_a0
+ MILLIRET
+ r__r_t0
+LSYM(e4t08a0) t0__t0_2a0
+ a1_ne_0_b_l1
+ r__r_4t0
+ MILLIRETN
+LSYM(e_5t0) a1_ne_0_b_l0
+ t0__5t0
+ MILLIRET
+ r__r_t0
+LSYM(e_8t0) a1_ne_0_b_l1
+ r__r_8t0
+ MILLIRETN
+LSYM(e_8t0a0) a1_ne_0_b_l0
+ t0__8t0_a0
+ MILLIRET
+ r__r_t0
+
+ .procend
+ .end
+#endif
--- /dev/null
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+ adapted for gcc by Paul Bame <bame@debian.org>
+ and Alan Modra <alan@linuxcare.com.au>.
+
+ Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+ This file is part of GCC and is released under the terms of
+ of the GNU General Public License as published by the Free Software
+ Foundation; either version 2, or (at your option) any later version.
+ See the file COPYING in the top-level GCC source directory for a copy
+ of the license. */
+
+#ifndef _PA_MILLI_H_
+#define _PA_MILLI_H_
+
+#define L_dyncall
+#define L_divI
+#define L_divU
+#define L_remI
+#define L_remU
+#define L_div_const
+#define L_mulI
+
+#ifdef CONFIG_64BIT
+ .level 2.0w
+#endif
+
+/* Hardware General Registers. */
+r0: .reg %r0
+r1: .reg %r1
+r2: .reg %r2
+r3: .reg %r3
+r4: .reg %r4
+r5: .reg %r5
+r6: .reg %r6
+r7: .reg %r7
+r8: .reg %r8
+r9: .reg %r9
+r10: .reg %r10
+r11: .reg %r11
+r12: .reg %r12
+r13: .reg %r13
+r14: .reg %r14
+r15: .reg %r15
+r16: .reg %r16
+r17: .reg %r17
+r18: .reg %r18
+r19: .reg %r19
+r20: .reg %r20
+r21: .reg %r21
+r22: .reg %r22
+r23: .reg %r23
+r24: .reg %r24
+r25: .reg %r25
+r26: .reg %r26
+r27: .reg %r27
+r28: .reg %r28
+r29: .reg %r29
+r30: .reg %r30
+r31: .reg %r31
+
+/* Hardware Space Registers. */
+sr0: .reg %sr0
+sr1: .reg %sr1
+sr2: .reg %sr2
+sr3: .reg %sr3
+sr4: .reg %sr4
+sr5: .reg %sr5
+sr6: .reg %sr6
+sr7: .reg %sr7
+
+/* Hardware Floating Point Registers. */
+fr0: .reg %fr0
+fr1: .reg %fr1
+fr2: .reg %fr2
+fr3: .reg %fr3
+fr4: .reg %fr4
+fr5: .reg %fr5
+fr6: .reg %fr6
+fr7: .reg %fr7
+fr8: .reg %fr8
+fr9: .reg %fr9
+fr10: .reg %fr10
+fr11: .reg %fr11
+fr12: .reg %fr12
+fr13: .reg %fr13
+fr14: .reg %fr14
+fr15: .reg %fr15
+
+/* Hardware Control Registers. */
+cr11: .reg %cr11
+sar: .reg %cr11 /* Shift Amount Register */
+
+/* Software Architecture General Registers. */
+rp: .reg r2 /* return pointer */
+#ifdef CONFIG_64BIT
+mrp: .reg r2 /* millicode return pointer */
+#else
+mrp: .reg r31 /* millicode return pointer */
+#endif
+ret0: .reg r28 /* return value */
+ret1: .reg r29 /* return value (high part of double) */
+sp: .reg r30 /* stack pointer */
+dp: .reg r27 /* data pointer */
+arg0: .reg r26 /* argument */
+arg1: .reg r25 /* argument or high part of double argument */
+arg2: .reg r24 /* argument */
+arg3: .reg r23 /* argument or high part of double argument */
+
+/* Software Architecture Space Registers. */
+/* sr0 ; return link from BLE */
+sret: .reg sr1 /* return value */
+sarg: .reg sr1 /* argument */
+/* sr4 ; PC SPACE tracker */
+/* sr5 ; process private data */
+
+/* Frame Offsets (millicode convention!) Used when calling other
+ millicode routines. Stack unwinding is dependent upon these
+ definitions. */
+r31_slot: .equ -20 /* "current RP" slot */
+sr0_slot: .equ -16 /* "static link" slot */
+#if defined(CONFIG_64BIT)
+mrp_slot: .equ -16 /* "current RP" slot */
+psp_slot: .equ -8 /* "previous SP" slot */
+#else
+mrp_slot: .equ -20 /* "current RP" slot (replacing "r31_slot") */
+#endif
+
+
+#define DEFINE(name,value)name: .EQU value
+#define RDEFINE(name,value)name: .REG value
+#ifdef milliext
+#define MILLI_BE(lbl) BE lbl(sr7,r0)
+#define MILLI_BEN(lbl) BE,n lbl(sr7,r0)
+#define MILLI_BLE(lbl) BLE lbl(sr7,r0)
+#define MILLI_BLEN(lbl) BLE,n lbl(sr7,r0)
+#define MILLIRETN BE,n 0(sr0,mrp)
+#define MILLIRET BE 0(sr0,mrp)
+#define MILLI_RETN BE,n 0(sr0,mrp)
+#define MILLI_RET BE 0(sr0,mrp)
+#else
+#define MILLI_BE(lbl) B lbl
+#define MILLI_BEN(lbl) B,n lbl
+#define MILLI_BLE(lbl) BL lbl,mrp
+#define MILLI_BLEN(lbl) BL,n lbl,mrp
+#define MILLIRETN BV,n 0(mrp)
+#define MILLIRET BV 0(mrp)
+#define MILLI_RETN BV,n 0(mrp)
+#define MILLI_RET BV 0(mrp)
+#endif
+
+#define CAT(a,b) a##b
+
+#define SUBSPA_MILLI .section .text
+#define SUBSPA_MILLI_DIV .section .text.div,"ax",@progbits! .align 16
+#define SUBSPA_MILLI_MUL .section .text.mul,"ax",@progbits! .align 16
+#define ATTR_MILLI
+#define SUBSPA_DATA .section .data
+#define ATTR_DATA
+#define GLOBAL $global$
+#define GSYM(sym) !sym:
+#define LSYM(sym) !CAT(.L,sym:)
+#define LREF(sym) CAT(.L,sym)
+
+#endif /*_PA_MILLI_H_*/
--- /dev/null
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+ adapted for gcc by Paul Bame <bame@debian.org>
+ and Alan Modra <alan@linuxcare.com.au>.
+
+ Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+ This file is part of GCC and is released under the terms of
+ of the GNU General Public License as published by the Free Software
+ Foundation; either version 2, or (at your option) any later version.
+ See the file COPYING in the top-level GCC source directory for a copy
+ of the license. */
+
+#include "milli.h"
+
+#ifdef L_mulI
+/* VERSION "@(#)$$mulI $ Revision: 12.4 $ $ Date: 94/03/17 17:18:51 $" */
+/******************************************************************************
+This routine is used on PA2.0 processors when gcc -mno-fpregs is used
+
+ROUTINE: $$mulI
+
+
+DESCRIPTION:
+
+ $$mulI multiplies two single word integers, giving a single
+ word result.
+
+
+INPUT REGISTERS:
+
+ arg0 = Operand 1
+ arg1 = Operand 2
+ r31 == return pc
+ sr0 == return space when called externally
+
+
+OUTPUT REGISTERS:
+
+ arg0 = undefined
+ arg1 = undefined
+ ret1 = result
+
+OTHER REGISTERS AFFECTED:
+
+ r1 = undefined
+
+SIDE EFFECTS:
+
+ Causes a trap under the following conditions: NONE
+ Changes memory at the following places: NONE
+
+PERMISSIBLE CONTEXT:
+
+ Unwindable
+ Does not create a stack frame
+ Is usable for internal or external microcode
+
+DISCUSSION:
+
+ Calls other millicode routines via mrp: NONE
+ Calls other millicode routines: NONE
+
+***************************************************************************/
+
+
+#define a0 %arg0
+#define a1 %arg1
+#define t0 %r1
+#define r %ret1
+
+#define a0__128a0 zdep a0,24,25,a0
+#define a0__256a0 zdep a0,23,24,a0
+#define a1_ne_0_b_l0 comb,<> a1,0,LREF(l0)
+#define a1_ne_0_b_l1 comb,<> a1,0,LREF(l1)
+#define a1_ne_0_b_l2 comb,<> a1,0,LREF(l2)
+#define b_n_ret_t0 b,n LREF(ret_t0)
+#define b_e_shift b LREF(e_shift)
+#define b_e_t0ma0 b LREF(e_t0ma0)
+#define b_e_t0 b LREF(e_t0)
+#define b_e_t0a0 b LREF(e_t0a0)
+#define b_e_t02a0 b LREF(e_t02a0)
+#define b_e_t04a0 b LREF(e_t04a0)
+#define b_e_2t0 b LREF(e_2t0)
+#define b_e_2t0a0 b LREF(e_2t0a0)
+#define b_e_2t04a0 b LREF(e2t04a0)
+#define b_e_3t0 b LREF(e_3t0)
+#define b_e_4t0 b LREF(e_4t0)
+#define b_e_4t0a0 b LREF(e_4t0a0)
+#define b_e_4t08a0 b LREF(e4t08a0)
+#define b_e_5t0 b LREF(e_5t0)
+#define b_e_8t0 b LREF(e_8t0)
+#define b_e_8t0a0 b LREF(e_8t0a0)
+#define r__r_a0 add r,a0,r
+#define r__r_2a0 sh1add a0,r,r
+#define r__r_4a0 sh2add a0,r,r
+#define r__r_8a0 sh3add a0,r,r
+#define r__r_t0 add r,t0,r
+#define r__r_2t0 sh1add t0,r,r
+#define r__r_4t0 sh2add t0,r,r
+#define r__r_8t0 sh3add t0,r,r
+#define t0__3a0 sh1add a0,a0,t0
+#define t0__4a0 sh2add a0,0,t0
+#define t0__5a0 sh2add a0,a0,t0
+#define t0__8a0 sh3add a0,0,t0
+#define t0__9a0 sh3add a0,a0,t0
+#define t0__16a0 zdep a0,27,28,t0
+#define t0__32a0 zdep a0,26,27,t0
+#define t0__64a0 zdep a0,25,26,t0
+#define t0__128a0 zdep a0,24,25,t0
+#define t0__t0ma0 sub t0,a0,t0
+#define t0__t0_a0 add t0,a0,t0
+#define t0__t0_2a0 sh1add a0,t0,t0
+#define t0__t0_4a0 sh2add a0,t0,t0
+#define t0__t0_8a0 sh3add a0,t0,t0
+#define t0__2t0_a0 sh1add t0,a0,t0
+#define t0__3t0 sh1add t0,t0,t0
+#define t0__4t0 sh2add t0,0,t0
+#define t0__4t0_a0 sh2add t0,a0,t0
+#define t0__5t0 sh2add t0,t0,t0
+#define t0__8t0 sh3add t0,0,t0
+#define t0__8t0_a0 sh3add t0,a0,t0
+#define t0__9t0 sh3add t0,t0,t0
+#define t0__16t0 zdep t0,27,28,t0
+#define t0__32t0 zdep t0,26,27,t0
+#define t0__256a0 zdep a0,23,24,t0
+
+
+ SUBSPA_MILLI
+ ATTR_MILLI
+ .align 16
+ .proc
+ .callinfo millicode
+ .export $$mulI,millicode
+GSYM($$mulI)
+ combt,<<= a1,a0,LREF(l4) /* swap args if unsigned a1>a0 */
+ copy 0,r /* zero out the result */
+ xor a0,a1,a0 /* swap a0 & a1 using the */
+ xor a0,a1,a1 /* old xor trick */
+ xor a0,a1,a0
+LSYM(l4)
+ combt,<= 0,a0,LREF(l3) /* if a0>=0 then proceed like unsigned */
+ zdep a1,30,8,t0 /* t0 = (a1&0xff)<<1 ********* */
+ sub,> 0,a1,t0 /* otherwise negate both and */
+ combt,<=,n a0,t0,LREF(l2) /* swap back if |a0|<|a1| */
+ sub 0,a0,a1
+ movb,tr,n t0,a0,LREF(l2) /* 10th inst. */
+
+LSYM(l0) r__r_t0 /* add in this partial product */
+LSYM(l1) a0__256a0 /* a0 <<= 8 ****************** */
+LSYM(l2) zdep a1,30,8,t0 /* t0 = (a1&0xff)<<1 ********* */
+LSYM(l3) blr t0,0 /* case on these 8 bits ****** */
+ extru a1,23,24,a1 /* a1 >>= 8 ****************** */
+
+/*16 insts before this. */
+/* a0 <<= 8 ************************** */
+LSYM(x0) a1_ne_0_b_l2 ! a0__256a0 ! MILLIRETN ! nop
+LSYM(x1) a1_ne_0_b_l1 ! r__r_a0 ! MILLIRETN ! nop
+LSYM(x2) a1_ne_0_b_l1 ! r__r_2a0 ! MILLIRETN ! nop
+LSYM(x3) a1_ne_0_b_l0 ! t0__3a0 ! MILLIRET ! r__r_t0
+LSYM(x4) a1_ne_0_b_l1 ! r__r_4a0 ! MILLIRETN ! nop
+LSYM(x5) a1_ne_0_b_l0 ! t0__5a0 ! MILLIRET ! r__r_t0
+LSYM(x6) t0__3a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
+LSYM(x7) t0__3a0 ! a1_ne_0_b_l0 ! r__r_4a0 ! b_n_ret_t0
+LSYM(x8) a1_ne_0_b_l1 ! r__r_8a0 ! MILLIRETN ! nop
+LSYM(x9) a1_ne_0_b_l0 ! t0__9a0 ! MILLIRET ! r__r_t0
+LSYM(x10) t0__5a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
+LSYM(x11) t0__3a0 ! a1_ne_0_b_l0 ! r__r_8a0 ! b_n_ret_t0
+LSYM(x12) t0__3a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
+LSYM(x13) t0__5a0 ! a1_ne_0_b_l0 ! r__r_8a0 ! b_n_ret_t0
+LSYM(x14) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x15) t0__5a0 ! a1_ne_0_b_l0 ! t0__3t0 ! b_n_ret_t0
+LSYM(x16) t0__16a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
+LSYM(x17) t0__9a0 ! a1_ne_0_b_l0 ! t0__t0_8a0 ! b_n_ret_t0
+LSYM(x18) t0__9a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
+LSYM(x19) t0__9a0 ! a1_ne_0_b_l0 ! t0__2t0_a0 ! b_n_ret_t0
+LSYM(x20) t0__5a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
+LSYM(x21) t0__5a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
+LSYM(x22) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x23) t0__5a0 ! t0__2t0_a0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x24) t0__3a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
+LSYM(x25) t0__5a0 ! a1_ne_0_b_l0 ! t0__5t0 ! b_n_ret_t0
+LSYM(x26) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x27) t0__3a0 ! a1_ne_0_b_l0 ! t0__9t0 ! b_n_ret_t0
+LSYM(x28) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x29) t0__3a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x30) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_2t0
+LSYM(x31) t0__32a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
+LSYM(x32) t0__32a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
+LSYM(x33) t0__8a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
+LSYM(x34) t0__16a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x35) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__t0_8a0
+LSYM(x36) t0__9a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
+LSYM(x37) t0__9a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
+LSYM(x38) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x39) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x40) t0__5a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
+LSYM(x41) t0__5a0 ! a1_ne_0_b_l0 ! t0__8t0_a0 ! b_n_ret_t0
+LSYM(x42) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x43) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x44) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x45) t0__9a0 ! a1_ne_0_b_l0 ! t0__5t0 ! b_n_ret_t0
+LSYM(x46) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_a0
+LSYM(x47) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_2a0
+LSYM(x48) t0__3a0 ! a1_ne_0_b_l0 ! t0__16t0 ! b_n_ret_t0
+LSYM(x49) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_4a0
+LSYM(x50) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_2t0
+LSYM(x51) t0__9a0 ! t0__t0_8a0 ! b_e_t0 ! t0__3t0
+LSYM(x52) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x53) t0__3a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x54) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_2t0
+LSYM(x55) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x56) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
+LSYM(x57) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__3t0
+LSYM(x58) t0__3a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
+LSYM(x59) t0__9a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__3t0
+LSYM(x60) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
+LSYM(x61) t0__5a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x62) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
+LSYM(x63) t0__64a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
+LSYM(x64) t0__64a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
+LSYM(x65) t0__8a0 ! a1_ne_0_b_l0 ! t0__8t0_a0 ! b_n_ret_t0
+LSYM(x66) t0__32a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x67) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x68) t0__8a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x69) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x70) t0__64a0 ! t0__t0_4a0 ! b_e_t0 ! t0__t0_2a0
+LSYM(x71) t0__9a0 ! t0__8t0 ! b_e_t0 ! t0__t0ma0
+LSYM(x72) t0__9a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
+LSYM(x73) t0__9a0 ! t0__8t0_a0 ! b_e_shift ! r__r_t0
+LSYM(x74) t0__9a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x75) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x76) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x77) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x78) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__2t0_a0
+LSYM(x79) t0__16a0 ! t0__5t0 ! b_e_t0 ! t0__t0ma0
+LSYM(x80) t0__16a0 ! t0__5t0 ! b_e_shift ! r__r_t0
+LSYM(x81) t0__9a0 ! t0__9t0 ! b_e_shift ! r__r_t0
+LSYM(x82) t0__5a0 ! t0__8t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x83) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x84) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x85) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__5t0
+LSYM(x86) t0__5a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
+LSYM(x87) t0__9a0 ! t0__9t0 ! b_e_t02a0 ! t0__t0_4a0
+LSYM(x88) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
+LSYM(x89) t0__5a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x90) t0__9a0 ! t0__5t0 ! b_e_shift ! r__r_2t0
+LSYM(x91) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x92) t0__5a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__2t0_a0
+LSYM(x93) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__3t0
+LSYM(x94) t0__9a0 ! t0__5t0 ! b_e_2t0 ! t0__t0_2a0
+LSYM(x95) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__5t0
+LSYM(x96) t0__8a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
+LSYM(x97) t0__8a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x98) t0__32a0 ! t0__3t0 ! b_e_t0 ! t0__t0_2a0
+LSYM(x99) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__3t0
+LSYM(x100) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_4t0
+LSYM(x101) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x102) t0__32a0 ! t0__t0_2a0 ! b_e_t0 ! t0__3t0
+LSYM(x103) t0__5a0 ! t0__5t0 ! b_e_t02a0 ! t0__4t0_a0
+LSYM(x104) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_8t0
+LSYM(x105) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
+LSYM(x106) t0__3a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__4t0_a0
+LSYM(x107) t0__9a0 ! t0__t0_4a0 ! b_e_t02a0 ! t0__8t0_a0
+LSYM(x108) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
+LSYM(x109) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x110) t0__9a0 ! t0__3t0 ! b_e_2t0 ! t0__2t0_a0
+LSYM(x111) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__3t0
+LSYM(x112) t0__3a0 ! t0__2t0_a0 ! b_e_t0 ! t0__16t0
+LSYM(x113) t0__9a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__3t0
+LSYM(x114) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__3t0
+LSYM(x115) t0__9a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__3t0
+LSYM(x116) t0__3a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__4t0_a0
+LSYM(x117) t0__3a0 ! t0__4t0_a0 ! b_e_t0 ! t0__9t0
+LSYM(x118) t0__3a0 ! t0__4t0_a0 ! b_e_t0a0 ! t0__9t0
+LSYM(x119) t0__3a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__9t0
+LSYM(x120) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
+LSYM(x121) t0__5a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x122) t0__5a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
+LSYM(x123) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
+LSYM(x124) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_4t0
+LSYM(x125) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__5t0
+LSYM(x126) t0__64a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
+LSYM(x127) t0__128a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
+LSYM(x128) t0__128a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
+LSYM(x129) t0__128a0 ! a1_ne_0_b_l0 ! t0__t0_a0 ! b_n_ret_t0
+LSYM(x130) t0__64a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x131) t0__8a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x132) t0__8a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x133) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x134) t0__8a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
+LSYM(x135) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__3t0
+LSYM(x136) t0__8a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
+LSYM(x137) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x138) t0__8a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
+LSYM(x139) t0__8a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__4t0_a0
+LSYM(x140) t0__3a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__5t0
+LSYM(x141) t0__8a0 ! t0__2t0_a0 ! b_e_4t0a0 ! t0__2t0_a0
+LSYM(x142) t0__9a0 ! t0__8t0 ! b_e_2t0 ! t0__t0ma0
+LSYM(x143) t0__16a0 ! t0__9t0 ! b_e_t0 ! t0__t0ma0
+LSYM(x144) t0__9a0 ! t0__8t0 ! b_e_shift ! r__r_2t0
+LSYM(x145) t0__9a0 ! t0__8t0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x146) t0__9a0 ! t0__8t0_a0 ! b_e_shift ! r__r_2t0
+LSYM(x147) t0__9a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x148) t0__9a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x149) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x150) t0__9a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
+LSYM(x151) t0__9a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__2t0_a0
+LSYM(x152) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
+LSYM(x153) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x154) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
+LSYM(x155) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__5t0
+LSYM(x156) t0__9a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__2t0_a0
+LSYM(x157) t0__32a0 ! t0__t0ma0 ! b_e_t02a0 ! t0__5t0
+LSYM(x158) t0__16a0 ! t0__5t0 ! b_e_2t0 ! t0__t0ma0
+LSYM(x159) t0__32a0 ! t0__5t0 ! b_e_t0 ! t0__t0ma0
+LSYM(x160) t0__5a0 ! t0__4t0 ! b_e_shift ! r__r_8t0
+LSYM(x161) t0__8a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x162) t0__9a0 ! t0__9t0 ! b_e_shift ! r__r_2t0
+LSYM(x163) t0__9a0 ! t0__9t0 ! b_e_t0 ! t0__2t0_a0
+LSYM(x164) t0__5a0 ! t0__8t0_a0 ! b_e_shift ! r__r_4t0
+LSYM(x165) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
+LSYM(x166) t0__5a0 ! t0__8t0_a0 ! b_e_2t0 ! t0__2t0_a0
+LSYM(x167) t0__5a0 ! t0__8t0_a0 ! b_e_2t0a0 ! t0__2t0_a0
+LSYM(x168) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_8t0
+LSYM(x169) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x170) t0__32a0 ! t0__t0_2a0 ! b_e_t0 ! t0__5t0
+LSYM(x171) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__9t0
+LSYM(x172) t0__5a0 ! t0__4t0_a0 ! b_e_4t0 ! t0__2t0_a0
+LSYM(x173) t0__9a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__9t0
+LSYM(x174) t0__32a0 ! t0__t0_2a0 ! b_e_t04a0 ! t0__5t0
+LSYM(x175) t0__8a0 ! t0__2t0_a0 ! b_e_5t0 ! t0__2t0_a0
+LSYM(x176) t0__5a0 ! t0__4t0_a0 ! b_e_8t0 ! t0__t0_a0
+LSYM(x177) t0__5a0 ! t0__4t0_a0 ! b_e_8t0a0 ! t0__t0_a0
+LSYM(x178) t0__5a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__8t0_a0
+LSYM(x179) t0__5a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__8t0_a0
+LSYM(x180) t0__9a0 ! t0__5t0 ! b_e_shift ! r__r_4t0
+LSYM(x181) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x182) t0__9a0 ! t0__5t0 ! b_e_2t0 ! t0__2t0_a0
+LSYM(x183) t0__9a0 ! t0__5t0 ! b_e_2t0a0 ! t0__2t0_a0
+LSYM(x184) t0__5a0 ! t0__9t0 ! b_e_4t0 ! t0__t0_a0
+LSYM(x185) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
+LSYM(x186) t0__32a0 ! t0__t0ma0 ! b_e_2t0 ! t0__3t0
+LSYM(x187) t0__9a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__5t0
+LSYM(x188) t0__9a0 ! t0__5t0 ! b_e_4t0 ! t0__t0_2a0
+LSYM(x189) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__9t0
+LSYM(x190) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__5t0
+LSYM(x191) t0__64a0 ! t0__3t0 ! b_e_t0 ! t0__t0ma0
+LSYM(x192) t0__8a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
+LSYM(x193) t0__8a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x194) t0__8a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
+LSYM(x195) t0__8a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
+LSYM(x196) t0__8a0 ! t0__3t0 ! b_e_4t0 ! t0__2t0_a0
+LSYM(x197) t0__8a0 ! t0__3t0 ! b_e_4t0a0 ! t0__2t0_a0
+LSYM(x198) t0__64a0 ! t0__t0_2a0 ! b_e_t0 ! t0__3t0
+LSYM(x199) t0__8a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__3t0
+LSYM(x200) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_8t0
+LSYM(x201) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x202) t0__5a0 ! t0__5t0 ! b_e_2t0 ! t0__4t0_a0
+LSYM(x203) t0__5a0 ! t0__5t0 ! b_e_2t0a0 ! t0__4t0_a0
+LSYM(x204) t0__8a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__3t0
+LSYM(x205) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__5t0
+LSYM(x206) t0__64a0 ! t0__t0_4a0 ! b_e_t02a0 ! t0__3t0
+LSYM(x207) t0__8a0 ! t0__2t0_a0 ! b_e_3t0 ! t0__4t0_a0
+LSYM(x208) t0__5a0 ! t0__5t0 ! b_e_8t0 ! t0__t0_a0
+LSYM(x209) t0__5a0 ! t0__5t0 ! b_e_8t0a0 ! t0__t0_a0
+LSYM(x210) t0__5a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__5t0
+LSYM(x211) t0__5a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__5t0
+LSYM(x212) t0__3a0 ! t0__4t0_a0 ! b_e_4t0 ! t0__4t0_a0
+LSYM(x213) t0__3a0 ! t0__4t0_a0 ! b_e_4t0a0 ! t0__4t0_a0
+LSYM(x214) t0__9a0 ! t0__t0_4a0 ! b_e_2t04a0 ! t0__8t0_a0
+LSYM(x215) t0__5a0 ! t0__4t0_a0 ! b_e_5t0 ! t0__2t0_a0
+LSYM(x216) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
+LSYM(x217) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x218) t0__9a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
+LSYM(x219) t0__9a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
+LSYM(x220) t0__3a0 ! t0__9t0 ! b_e_4t0 ! t0__2t0_a0
+LSYM(x221) t0__3a0 ! t0__9t0 ! b_e_4t0a0 ! t0__2t0_a0
+LSYM(x222) t0__9a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__3t0
+LSYM(x223) t0__9a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__3t0
+LSYM(x224) t0__9a0 ! t0__3t0 ! b_e_8t0 ! t0__t0_a0
+LSYM(x225) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__5t0
+LSYM(x226) t0__3a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__32t0
+LSYM(x227) t0__9a0 ! t0__5t0 ! b_e_t02a0 ! t0__5t0
+LSYM(x228) t0__9a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__3t0
+LSYM(x229) t0__9a0 ! t0__2t0_a0 ! b_e_4t0a0 ! t0__3t0
+LSYM(x230) t0__9a0 ! t0__5t0 ! b_e_5t0 ! t0__t0_a0
+LSYM(x231) t0__9a0 ! t0__2t0_a0 ! b_e_3t0 ! t0__4t0_a0
+LSYM(x232) t0__3a0 ! t0__2t0_a0 ! b_e_8t0 ! t0__4t0_a0
+LSYM(x233) t0__3a0 ! t0__2t0_a0 ! b_e_8t0a0 ! t0__4t0_a0
+LSYM(x234) t0__3a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__9t0
+LSYM(x235) t0__3a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__9t0
+LSYM(x236) t0__9a0 ! t0__2t0_a0 ! b_e_4t08a0 ! t0__3t0
+LSYM(x237) t0__16a0 ! t0__5t0 ! b_e_3t0 ! t0__t0ma0
+LSYM(x238) t0__3a0 ! t0__4t0_a0 ! b_e_2t04a0 ! t0__9t0
+LSYM(x239) t0__16a0 ! t0__5t0 ! b_e_t0ma0 ! t0__3t0
+LSYM(x240) t0__9a0 ! t0__t0_a0 ! b_e_8t0 ! t0__3t0
+LSYM(x241) t0__9a0 ! t0__t0_a0 ! b_e_8t0a0 ! t0__3t0
+LSYM(x242) t0__5a0 ! t0__3t0 ! b_e_2t0 ! t0__8t0_a0
+LSYM(x243) t0__9a0 ! t0__9t0 ! b_e_t0 ! t0__3t0
+LSYM(x244) t0__5a0 ! t0__3t0 ! b_e_4t0 ! t0__4t0_a0
+LSYM(x245) t0__8a0 ! t0__3t0 ! b_e_5t0 ! t0__2t0_a0
+LSYM(x246) t0__5a0 ! t0__8t0_a0 ! b_e_2t0 ! t0__3t0
+LSYM(x247) t0__5a0 ! t0__8t0_a0 ! b_e_2t0a0 ! t0__3t0
+LSYM(x248) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_8t0
+LSYM(x249) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__8t0_a0
+LSYM(x250) t0__5a0 ! t0__5t0 ! b_e_2t0 ! t0__5t0
+LSYM(x251) t0__5a0 ! t0__5t0 ! b_e_2t0a0 ! t0__5t0
+LSYM(x252) t0__64a0 ! t0__t0ma0 ! b_e_shift ! r__r_4t0
+LSYM(x253) t0__64a0 ! t0__t0ma0 ! b_e_t0 ! t0__4t0_a0
+LSYM(x254) t0__128a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
+LSYM(x255) t0__256a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
+/*1040 insts before this. */
+LSYM(ret_t0) MILLIRET
+LSYM(e_t0) r__r_t0
+LSYM(e_shift) a1_ne_0_b_l2
+ a0__256a0 /* a0 <<= 8 *********** */
+ MILLIRETN
+LSYM(e_t0ma0) a1_ne_0_b_l0
+ t0__t0ma0
+ MILLIRET
+ r__r_t0
+LSYM(e_t0a0) a1_ne_0_b_l0
+ t0__t0_a0
+ MILLIRET
+ r__r_t0
+LSYM(e_t02a0) a1_ne_0_b_l0
+ t0__t0_2a0
+ MILLIRET
+ r__r_t0
+LSYM(e_t04a0) a1_ne_0_b_l0
+ t0__t0_4a0
+ MILLIRET
+ r__r_t0
+LSYM(e_2t0) a1_ne_0_b_l1
+ r__r_2t0
+ MILLIRETN
+LSYM(e_2t0a0) a1_ne_0_b_l0
+ t0__2t0_a0
+ MILLIRET
+ r__r_t0
+LSYM(e2t04a0) t0__t0_2a0
+ a1_ne_0_b_l1
+ r__r_2t0
+ MILLIRETN
+LSYM(e_3t0) a1_ne_0_b_l0
+ t0__3t0
+ MILLIRET
+ r__r_t0
+LSYM(e_4t0) a1_ne_0_b_l1
+ r__r_4t0
+ MILLIRETN
+LSYM(e_4t0a0) a1_ne_0_b_l0
+ t0__4t0_a0
+ MILLIRET
+ r__r_t0
+LSYM(e4t08a0) t0__t0_2a0
+ a1_ne_0_b_l1
+ r__r_4t0
+ MILLIRETN
+LSYM(e_5t0) a1_ne_0_b_l0
+ t0__5t0
+ MILLIRET
+ r__r_t0
+LSYM(e_8t0) a1_ne_0_b_l1
+ r__r_8t0
+ MILLIRETN
+LSYM(e_8t0a0) a1_ne_0_b_l0
+ t0__8t0_a0
+ MILLIRET
+ r__r_t0
+
+ .procend
+ .end
+#endif
--- /dev/null
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+ adapted for gcc by Paul Bame <bame@debian.org>
+ and Alan Modra <alan@linuxcare.com.au>.
+
+ Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+ This file is part of GCC and is released under the terms of
+ of the GNU General Public License as published by the Free Software
+ Foundation; either version 2, or (at your option) any later version.
+ See the file COPYING in the top-level GCC source directory for a copy
+ of the license. */
+
+#include "milli.h"
+
+#ifdef L_remI
+/* ROUTINE: $$remI
+
+ DESCRIPTION:
+ . $$remI returns the remainder of the division of two signed 32-bit
+ . integers. The sign of the remainder is the same as the sign of
+ . the dividend.
+
+
+ INPUT REGISTERS:
+ . arg0 == dividend
+ . arg1 == divisor
+ . mrp == return pc
+ . sr0 == return space when called externally
+
+ OUTPUT REGISTERS:
+ . arg0 = destroyed
+ . arg1 = destroyed
+ . ret1 = remainder
+
+ OTHER REGISTERS AFFECTED:
+ . r1 = undefined
+
+ SIDE EFFECTS:
+ . Causes a trap under the following conditions: DIVIDE BY ZERO
+ . Changes memory at the following places: NONE
+
+ PERMISSIBLE CONTEXT:
+ . Unwindable
+ . Does not create a stack frame
+ . Is usable for internal or external microcode
+
+ DISCUSSION:
+ . Calls other millicode routines via mrp: NONE
+ . Calls other millicode routines: NONE */
+
+RDEFINE(tmp,r1)
+RDEFINE(retreg,ret1)
+
+ SUBSPA_MILLI
+ ATTR_MILLI
+ .proc
+ .callinfo millicode
+ .entry
+GSYM($$remI)
+GSYM($$remoI)
+ .export $$remI,MILLICODE
+ .export $$remoI,MILLICODE
+ ldo -1(arg1),tmp /* is there at most one bit set ? */
+ and,<> arg1,tmp,r0 /* if not, don't use power of 2 */
+ addi,> 0,arg1,r0 /* if denominator > 0, use power */
+ /* of 2 */
+ b,n LREF(neg_denom)
+LSYM(pow2)
+ comb,>,n 0,arg0,LREF(neg_num) /* is numerator < 0 ? */
+ and arg0,tmp,retreg /* get the result */
+ MILLIRETN
+LSYM(neg_num)
+ subi 0,arg0,arg0 /* negate numerator */
+ and arg0,tmp,retreg /* get the result */
+ subi 0,retreg,retreg /* negate result */
+ MILLIRETN
+LSYM(neg_denom)
+ addi,< 0,arg1,r0 /* if arg1 >= 0, it's not power */
+ /* of 2 */
+ b,n LREF(regular_seq)
+ sub r0,arg1,tmp /* make denominator positive */
+ comb,=,n arg1,tmp,LREF(regular_seq) /* test against 0x80000000 and 0 */
+ ldo -1(tmp),retreg /* is there at most one bit set ? */
+ and,= tmp,retreg,r0 /* if not, go to regular_seq */
+ b,n LREF(regular_seq)
+ comb,>,n 0,arg0,LREF(neg_num_2) /* if arg0 < 0, negate it */
+ and arg0,retreg,retreg
+ MILLIRETN
+LSYM(neg_num_2)
+ subi 0,arg0,tmp /* test against 0x80000000 */
+ and tmp,retreg,retreg
+ subi 0,retreg,retreg
+ MILLIRETN
+LSYM(regular_seq)
+ addit,= 0,arg1,0 /* trap if div by zero */
+ add,>= 0,arg0,retreg /* move dividend, if retreg < 0, */
+ sub 0,retreg,retreg /* make it positive */
+ sub 0,arg1, tmp /* clear carry, */
+ /* negate the divisor */
+ ds 0, tmp,0 /* set V-bit to the comple- */
+ /* ment of the divisor sign */
+ or 0,0, tmp /* clear tmp */
+ add retreg,retreg,retreg /* shift msb bit into carry */
+ ds tmp,arg1, tmp /* 1st divide step, if no carry */
+ /* out, msb of quotient = 0 */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+LSYM(t1)
+ ds tmp,arg1, tmp /* 2nd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 3rd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 4th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 5th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 6th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 7th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 8th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 9th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 10th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 11th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 12th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 13th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 14th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 15th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 16th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 17th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 18th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 19th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 20th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 21st divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 22nd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 23rd divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 24th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 25th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 26th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 27th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 28th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 29th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 30th divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 31st divide step */
+ addc retreg,retreg,retreg /* shift retreg with/into carry */
+ ds tmp,arg1, tmp /* 32nd divide step, */
+ addc retreg,retreg,retreg /* shift last bit into retreg */
+ movb,>=,n tmp,retreg,LREF(finish) /* branch if pos. tmp */
+ add,< arg1,0,0 /* if arg1 > 0, add arg1 */
+ add,tr tmp,arg1,retreg /* for correcting remainder tmp */
+ sub tmp,arg1,retreg /* else add absolute value arg1 */
+LSYM(finish)
+ add,>= arg0,0,0 /* set sign of remainder */
+ sub 0,retreg,retreg /* to sign of dividend */
+ MILLIRET
+ nop
+ .exit
+ .procend
+#ifdef milliext
+ .origin 0x00000200
+#endif
+ .end
+#endif
--- /dev/null
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+ adapted for gcc by Paul Bame <bame@debian.org>
+ and Alan Modra <alan@linuxcare.com.au>.
+
+ Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+ This file is part of GCC and is released under the terms of
+ of the GNU General Public License as published by the Free Software
+ Foundation; either version 2, or (at your option) any later version.
+ See the file COPYING in the top-level GCC source directory for a copy
+ of the license. */
+
+#include "milli.h"
+
+#ifdef L_remU
+/* ROUTINE: $$remU
+ . Single precision divide for remainder with unsigned binary integers.
+ .
+ . The remainder must be dividend-(dividend/divisor)*divisor.
+ . Divide by zero is trapped.
+
+ INPUT REGISTERS:
+ . arg0 == dividend
+ . arg1 == divisor
+ . mrp == return pc
+ . sr0 == return space when called externally
+
+ OUTPUT REGISTERS:
+ . arg0 = undefined
+ . arg1 = undefined
+ . ret1 = remainder
+
+ OTHER REGISTERS AFFECTED:
+ . r1 = undefined
+
+ SIDE EFFECTS:
+ . Causes a trap under the following conditions: DIVIDE BY ZERO
+ . Changes memory at the following places: NONE
+
+ PERMISSIBLE CONTEXT:
+ . Unwindable.
+ . Does not create a stack frame.
+ . Suitable for internal or external millicode.
+ . Assumes the special millicode register conventions.
+
+ DISCUSSION:
+ . Calls other millicode routines using mrp: NONE
+ . Calls other millicode routines: NONE */
+
+
+RDEFINE(temp,r1)
+RDEFINE(rmndr,ret1) /* r29 */
+ SUBSPA_MILLI
+ ATTR_MILLI
+ .export $$remU,millicode
+ .proc
+ .callinfo millicode
+ .entry
+GSYM($$remU)
+ ldo -1(arg1),temp /* is there at most one bit set ? */
+ and,= arg1,temp,r0 /* if not, don't use power of 2 */
+ b LREF(regular_seq)
+ addit,= 0,arg1,r0 /* trap on div by zero */
+ and arg0,temp,rmndr /* get the result for power of 2 */
+ MILLIRETN
+LSYM(regular_seq)
+ comib,>=,n 0,arg1,LREF(special_case)
+ subi 0,arg1,rmndr /* clear carry, negate the divisor */
+ ds r0,rmndr,r0 /* set V-bit to 1 */
+ add arg0,arg0,temp /* shift msb bit into carry */
+ ds r0,arg1,rmndr /* 1st divide step, if no carry */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 2nd divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 3rd divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 4th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 5th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 6th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 7th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 8th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 9th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 10th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 11th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 12th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 13th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 14th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 15th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 16th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 17th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 18th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 19th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 20th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 21st divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 22nd divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 23rd divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 24th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 25th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 26th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 27th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 28th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 29th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 30th divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 31st divide step */
+ addc temp,temp,temp /* shift temp with/into carry */
+ ds rmndr,arg1,rmndr /* 32nd divide step, */
+ comiclr,<= 0,rmndr,r0
+ add rmndr,arg1,rmndr /* correction */
+ MILLIRETN
+ nop
+
+/* Putting >= on the last DS and deleting COMICLR does not work! */
+LSYM(special_case)
+ sub,>>= arg0,arg1,rmndr
+ copy arg0,rmndr
+ MILLIRETN
+ nop
+ .exit
+ .procend
+ .end
+#endif
printk("Zone list for zone %d on node %d: ", j, i);
for (k = 0; zl->zones[k] != NULL; k++)
- printk("[%ld/%s] ", zone_to_nid(zl->zones[k]), zl->zones[k]->name);
+ printk("[%d/%s] ", zone_to_nid(zl->zones[k]), zl->zones[k]->name);
printk("\n");
}
}
#ifdef CONFIG_64BIT
-/*
-** Determine if a device is already configured.
-** If so, reserve it resources.
-**
-** Read PCI cfg command register and see if I/O or MMIO is enabled.
-** PAT has to enable the devices it's using.
-**
-** Note: resources are fixed up before we try to claim them.
-*/
-static void
-lba_claim_dev_resources(struct pci_dev *dev)
-{
- u16 cmd;
- int i, srch_flags;
-
- (void) pci_read_config_word(dev, PCI_COMMAND, &cmd);
-
- srch_flags = (cmd & PCI_COMMAND_IO) ? IORESOURCE_IO : 0;
- if (cmd & PCI_COMMAND_MEMORY)
- srch_flags |= IORESOURCE_MEM;
-
- if (!srch_flags)
- return;
-
- for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
- if (dev->resource[i].flags & srch_flags) {
- pci_claim_resource(dev, i);
- DBG(" claimed %s %d [%lx,%lx]/%lx\n",
- pci_name(dev), i,
- dev->resource[i].start,
- dev->resource[i].end,
- dev->resource[i].flags
- );
- }
- }
-}
-
-
/*
* truncate_pat_collision: Deal with overlaps or outright collisions
* between PAT PDC reported ranges.
}
#else
-#define lba_claim_dev_resources(dev) do { } while (0)
#define truncate_pat_collision(r,n) (0)
#endif
** pci_alloc_primary_bus() mangles this.
*/
if (bus->self) {
+ int i;
/* PCI-PCI Bridge */
pci_read_bridge_bases(bus);
+ for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) {
+ pci_claim_resource(bus->self, i);
+ }
} else {
/* Host-PCI Bridge */
int err, i;
DBG("lba_fixup_bus() WTF? 0x%lx [%lx/%lx] XXX",
res->flags, res->start, res->end);
}
+ if ((i != PCI_ROM_RESOURCE) ||
+ (res->flags & IORESOURCE_ROM_ENABLE))
+ pci_claim_resource(dev, i);
}
#ifdef FBB_SUPPORT
bus->bridge_ctl &= ~(status & PCI_STATUS_FAST_BACK);
#endif
- if (is_pdc_pat()) {
- /* Claim resources for PDC's devices */
- lba_claim_dev_resources(dev);
- }
-
/*
** P2PB's have no IRQs. ignore them.
*/
unsigned short i;
char in[count+1], *temp;
struct device *dev;
+ int ret;
if (!entry || !buf || !count)
return -EINVAL;
/* Update the symlink to the real device */
sysfs_remove_link(&entry->kobj, "device");
- sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
+ ret = sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
+ WARN_ON(ret);
+
write_unlock(&entry->rw_lock);
printk(KERN_INFO PDCS_PREFIX ": changed \"%s\" path to \"%s\"\n",
entry->ready = 2;
/* Add a nice symlink to the real device */
- if (entry->dev)
- sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
+ if (entry->dev) {
+ err = sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
+ WARN_ON(err);
+ }
write_unlock(&entry->rw_lock);
}
global_ioc_cnt *= 2;
}
- printk(KERN_INFO "%s found %s at 0x%lx\n",
- MODULE_NAME, version, dev->hpa.start);
+ printk(KERN_INFO "%s found %s at 0x%llx\n",
+ MODULE_NAME, version, (unsigned long long)dev->hpa.start);
sba_dev = kzalloc(sizeof(struct sba_device), GFP_KERNEL);
if (!sba_dev) {
struct superio_device *sio = &sio_dev;
struct pci_dev *pdev = sio->lio_pdev;
u16 word;
+ int ret;
if (sio->suckyio_irq_enabled)
return;
pci_write_config_word (pdev, PCI_COMMAND, word);
pci_set_master (pdev);
- pci_enable_device(pdev);
+ ret = pci_enable_device(pdev);
+ BUG_ON(ret < 0); /* not too much we can do about this... */
/*
* Next project is programming the onboard interrupt controllers.
include include/asm-generic/Kbuild.asm
+
+unifdef-y += pdc.h
/* Most machines react poorly to I/O-space being cacheable... Instead let's
* define ioremap() in terms of ioremap_nocache().
*/
-extern inline void __iomem * ioremap(unsigned long offset, unsigned long size)
+static inline void __iomem * ioremap(unsigned long offset, unsigned long size)
{
return __ioremap(offset, size, _PAGE_NO_CACHE);
}
#ifdef __KERNEL__
+#include <linux/const.h>
+
#if defined(CONFIG_PARISC_PAGE_SIZE_4KB)
# define PAGE_SHIFT 12
#elif defined(CONFIG_PARISC_PAGE_SIZE_16KB)
#else
# error "unknown default kernel page size"
#endif
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
extern void pcibios_register_hba(struct pci_hba_data *);
extern void pcibios_set_master(struct pci_dev *);
#else
-extern inline void pcibios_register_hba(struct pci_hba_data *x)
+static inline void pcibios_register_hba(struct pci_hba_data *x)
{
}
#endif
#ifndef _PARISC_PDC_H
#define _PARISC_PDC_H
-
/*
* PDC return values ...
* All PDC calls return a subset of these errors.
#define PDC_BUS_POW_WARN -12 /* Call could not complete in allowed power budget */
#define PDC_NOT_NARROW -17 /* Narrow mode not supported */
-
/*
* PDC entry points...
*/
#define PDC_MODEL_DISPEC 5 /* disable specific option */
#define PDC_MODEL_CPU_ID 6 /* returns cpu-id (only newer machines!) */
#define PDC_MODEL_CAPABILITIES 7 /* returns OS32/OS64-flags */
+/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
+#define PDC_MODEL_IOPDIR_FDC (1 << 2)
+#define PDC_MODEL_NVA_MASK (3 << 4)
+#define PDC_MODEL_NVA_SUPPORTED (0 << 4)
+#define PDC_MODEL_NVA_SLOW (1 << 4)
+#define PDC_MODEL_NVA_UNSUPPORTED (3 << 4)
#define PDC_MODEL_GET_BOOT__OP 8 /* returns boot test options */
#define PDC_MODEL_SET_BOOT__OP 9 /* set boot test options */
#define PDC_TOD 9 /* time-of-day clock (TOD) */
#define PDC_TOD_READ 0 /* read TOD */
#define PDC_TOD_WRITE 1 /* write TOD */
-#define PDC_TOD_ITIMER 2 /* calibrate Interval Timer (CR16) */
+
#define PDC_STABLE 10 /* stable storage (sprockets) */
#define PDC_STABLE_READ 0
#define PDC_MEM_RET_PDT_FULL -11
#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL
-#ifndef __ASSEMBLY__
-typedef struct {
- unsigned long long baseAddr;
- unsigned int pages;
- unsigned int reserved;
-} MemAddrTable_t;
-#endif
-
-
#define PDC_PSW 21 /* Get/Set default System Mask */
#define PDC_PSW_MASK 0 /* Return mask */
#define PDC_PSW_GET_DEFAULTS 1 /* Return defaults */
#define PDC_LINK_PCI_ENTRY_POINTS 0 /* list (Arg1) = 0 */
#define PDC_LINK_USB_ENTRY_POINTS 1 /* list (Arg1) = 1 */
+/* cl_class
+ * page 3-33 of IO-Firmware ARS
+ * IODC ENTRY_INIT(Search first) RET[1]
+ */
+#define CL_NULL 0 /* invalid */
+#define CL_RANDOM 1 /* random access (as disk) */
+#define CL_SEQU 2 /* sequential access (as tape) */
+#define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */
+#define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */
+#define CL_DISPL 9 /* half-duplex console (display) */
+#define CL_FC 10 /* FiberChannel access media */
+
+/* IODC ENTRY_INIT() */
+#define ENTRY_INIT_SRCH_FRST 2
+#define ENTRY_INIT_SRCH_NEXT 3
+#define ENTRY_INIT_MOD_DEV 4
+#define ENTRY_INIT_DEV 5
+#define ENTRY_INIT_MOD 6
+#define ENTRY_INIT_MSG 9
+
+/* IODC ENTRY_IO() */
+#define ENTRY_IO_BOOTIN 0
+#define ENTRY_IO_BOOTOUT 1
+#define ENTRY_IO_CIN 2
+#define ENTRY_IO_COUT 3
+#define ENTRY_IO_CLOSE 4
+#define ENTRY_IO_GETMSG 9
+#define ENTRY_IO_BBLOCK_IN 16
+#define ENTRY_IO_BBLOCK_OUT 17
+
+/* IODC ENTRY_SPA() */
+
+/* IODC ENTRY_CONFIG() */
+
+/* IODC ENTRY_TEST() */
+
+/* IODC ENTRY_TLB() */
/* constants for OS (NVM...) */
#define OS_ID_NONE 0 /* Undefined OS ID */
#define OSTAT_RUN 6
#define OSTAT_ON 7
-#ifndef __ASSEMBLY__
+/* Page Zero constant offsets used by the HPMC handler */
+#define BOOT_CONSOLE_HPA_OFFSET 0x3c0
+#define BOOT_CONSOLE_SPA_OFFSET 0x3c4
+#define BOOT_CONSOLE_PATH_OFFSET 0x3a8
+
+#if !defined(__ASSEMBLY__)
+#ifdef __KERNEL__
#include <linux/types.h>
unsigned long curr_key;
};
-/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
-
-#define PDC_MODEL_IOPDIR_FDC (1 << 2) /* see sba_iommu.c */
-#define PDC_MODEL_NVA_MASK (3 << 4)
-#define PDC_MODEL_NVA_SUPPORTED (0 << 4)
-#define PDC_MODEL_NVA_SLOW (1 << 4)
-#define PDC_MODEL_NVA_UNSUPPORTED (3 << 4)
-
struct pdc_cache_cf { /* for PDC_CACHE (I/D-caches) */
unsigned long
#ifdef CONFIG_64BIT
__u64 fr[32];
};
-#endif /* __ASSEMBLY__ */
+void pdc_console_init(void); /* in pdc_console.c */
+void pdc_console_restart(void);
+
+void setup_pdc(void); /* in inventory.c */
+
+/* wrapper-functions from pdc.c */
+
+int pdc_add_valid(unsigned long address);
+int pdc_chassis_info(struct pdc_chassis_info *chassis_info, void *led_info, unsigned long len);
+int pdc_chassis_disp(unsigned long disp);
+int pdc_chassis_warn(unsigned long *warn);
+int pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info);
+int pdc_iodc_read(unsigned long *actcnt, unsigned long hpa, unsigned int index,
+ void *iodc_data, unsigned int iodc_data_size);
+int pdc_system_map_find_mods(struct pdc_system_map_mod_info *pdc_mod_info,
+ struct pdc_module_path *mod_path, long mod_index);
+int pdc_system_map_find_addrs(struct pdc_system_map_addr_info *pdc_addr_info,
+ long mod_index, long addr_index);
+int pdc_model_info(struct pdc_model *model);
+int pdc_model_sysmodel(char *name);
+int pdc_model_cpuid(unsigned long *cpu_id);
+int pdc_model_versions(unsigned long *versions, int id);
+int pdc_model_capabilities(unsigned long *capabilities);
+int pdc_cache_info(struct pdc_cache_info *cache);
+int pdc_spaceid_bits(unsigned long *space_bits);
+#ifndef CONFIG_PA20
+int pdc_btlb_info(struct pdc_btlb_info *btlb);
+int pdc_mem_map_hpa(struct pdc_memory_map *r_addr, struct pdc_module_path *mod_path);
+#endif /* !CONFIG_PA20 */
+int pdc_lan_station_id(char *lan_addr, unsigned long net_hpa);
+
+int pdc_stable_read(unsigned long staddr, void *memaddr, unsigned long count);
+int pdc_stable_write(unsigned long staddr, void *memaddr, unsigned long count);
+int pdc_stable_get_size(unsigned long *size);
+int pdc_stable_verify_contents(void);
+int pdc_stable_initialize(void);
+
+int pdc_pci_irt_size(unsigned long *num_entries, unsigned long hpa);
+int pdc_pci_irt(unsigned long num_entries, unsigned long hpa, void *tbl);
+
+int pdc_get_initiator(struct hardware_path *, struct pdc_initiator *);
+int pdc_tod_read(struct pdc_tod *tod);
+int pdc_tod_set(unsigned long sec, unsigned long usec);
+
+#ifdef CONFIG_64BIT
+int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr,
+ struct pdc_memory_table *tbl, unsigned long entries);
+#endif
+
+void set_firmware_width(void);
+int pdc_do_firm_test_reset(unsigned long ftc_bitmap);
+int pdc_do_reset(void);
+int pdc_soft_power_info(unsigned long *power_reg);
+int pdc_soft_power_button(int sw_control);
+void pdc_io_reset(void);
+void pdc_io_reset_devices(void);
+int pdc_iodc_getc(void);
+void pdc_iodc_putc(unsigned char c);
+void pdc_iodc_outc(unsigned char c);
+void pdc_printf(const char *fmt, ...);
+
+void pdc_emergency_unlock(void);
+int pdc_sti_call(unsigned long func, unsigned long flags,
+ unsigned long inptr, unsigned long outputr,
+ unsigned long glob_cfg);
+
+static inline char * os_id_to_string(u16 os_id) {
+ switch(os_id) {
+ case OS_ID_NONE: return "No OS";
+ case OS_ID_HPUX: return "HP-UX";
+ case OS_ID_MPEXL: return "MPE-iX";
+ case OS_ID_OSF: return "OSF";
+ case OS_ID_HPRT: return "HP-RT";
+ case OS_ID_NOVEL: return "Novell Netware";
+ case OS_ID_LINUX: return "Linux";
+ default: return "Unknown";
+ }
+}
+
+#endif /* __KERNEL__ */
+
+#define PAGE0 ((struct zeropage *)__PAGE_OFFSET)
+
+/* DEFINITION OF THE ZERO-PAGE (PAG0) */
+/* based on work by Jason Eckhardt (jason@equator.com) */
-/* flags of the device_path (see below) */
+/* flags of the device_path */
#define PF_AUTOBOOT 0x80
#define PF_AUTOSEARCH 0x40
#define PF_TIMER 0x0F
-#ifndef __ASSEMBLY__
-
struct device_path { /* page 1-69 */
unsigned char flags; /* flags see above! */
unsigned char bc[6]; /* bus converter routing info */
unsigned short cl_class;/* see below */
} __attribute__((aligned(8))) ;
-#endif /* __ASSEMBLY__ */
-
-/* cl_class
- * page 3-33 of IO-Firmware ARS
- * IODC ENTRY_INIT(Search first) RET[1]
- */
-#define CL_NULL 0 /* invalid */
-#define CL_RANDOM 1 /* random access (as disk) */
-#define CL_SEQU 2 /* sequential access (as tape) */
-#define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */
-#define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */
-#define CL_DISPL 9 /* half-duplex console (display) */
-#define CL_FC 10 /* FiberChannel access media */
-
-#if 0
-/* FIXME: DEVCLASS_* duplicates CL_* (above). Delete DEVCLASS_*? */
-#define DEVCLASS_RANDOM 1
-#define DEVCLASS_SEQU 2
-#define DEVCLASS_DUPLEX 7
-#define DEVCLASS_KEYBD 8
-#define DEVCLASS_DISP 9
-#endif
-
-/* IODC ENTRY_INIT() */
-#define ENTRY_INIT_SRCH_FRST 2
-#define ENTRY_INIT_SRCH_NEXT 3
-#define ENTRY_INIT_MOD_DEV 4
-#define ENTRY_INIT_DEV 5
-#define ENTRY_INIT_MOD 6
-#define ENTRY_INIT_MSG 9
-
-/* IODC ENTRY_IO() */
-#define ENTRY_IO_BOOTIN 0
-#define ENTRY_IO_BOOTOUT 1
-#define ENTRY_IO_CIN 2
-#define ENTRY_IO_COUT 3
-#define ENTRY_IO_CLOSE 4
-#define ENTRY_IO_GETMSG 9
-#define ENTRY_IO_BBLOCK_IN 16
-#define ENTRY_IO_BBLOCK_OUT 17
-
-/* IODC ENTRY_SPA() */
-
-/* IODC ENTRY_CONFIG() */
-
-/* IODC ENTRY_TEST() */
-
-/* IODC ENTRY_TLB() */
-
-
-/* DEFINITION OF THE ZERO-PAGE (PAG0) */
-/* based on work by Jason Eckhardt (jason@equator.com) */
-
-#ifndef __ASSEMBLY__
-
-#define PAGE0 ((struct zeropage *)__PAGE_OFFSET)
-
struct zeropage {
/* [0x000] initialize vectors (VEC) */
unsigned int vec_special; /* must be zero */
__u32 pad608[126];
};
-#endif /* __ASSEMBLY__ */
-
-/* Page Zero constant offsets used by the HPMC handler */
-
-#define BOOT_CONSOLE_HPA_OFFSET 0x3c0
-#define BOOT_CONSOLE_SPA_OFFSET 0x3c4
-#define BOOT_CONSOLE_PATH_OFFSET 0x3a8
-
-#ifndef __ASSEMBLY__
-void pdc_console_init(void); /* in pdc_console.c */
-void pdc_console_restart(void);
-
-void setup_pdc(void); /* in inventory.c */
-
-/* wrapper-functions from pdc.c */
-
-int pdc_add_valid(unsigned long address);
-int pdc_chassis_info(struct pdc_chassis_info *chassis_info, void *led_info, unsigned long len);
-int pdc_chassis_disp(unsigned long disp);
-int pdc_chassis_warn(unsigned long *warn);
-int pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info);
-int pdc_iodc_read(unsigned long *actcnt, unsigned long hpa, unsigned int index,
- void *iodc_data, unsigned int iodc_data_size);
-int pdc_system_map_find_mods(struct pdc_system_map_mod_info *pdc_mod_info,
- struct pdc_module_path *mod_path, long mod_index);
-int pdc_system_map_find_addrs(struct pdc_system_map_addr_info *pdc_addr_info,
- long mod_index, long addr_index);
-int pdc_model_info(struct pdc_model *model);
-int pdc_model_sysmodel(char *name);
-int pdc_model_cpuid(unsigned long *cpu_id);
-int pdc_model_versions(unsigned long *versions, int id);
-int pdc_model_capabilities(unsigned long *capabilities);
-int pdc_cache_info(struct pdc_cache_info *cache);
-int pdc_spaceid_bits(unsigned long *space_bits);
-#ifndef CONFIG_PA20
-int pdc_btlb_info(struct pdc_btlb_info *btlb);
-int pdc_mem_map_hpa(struct pdc_memory_map *r_addr, struct pdc_module_path *mod_path);
-#endif /* !CONFIG_PA20 */
-int pdc_lan_station_id(char *lan_addr, unsigned long net_hpa);
-
-int pdc_stable_read(unsigned long staddr, void *memaddr, unsigned long count);
-int pdc_stable_write(unsigned long staddr, void *memaddr, unsigned long count);
-int pdc_stable_get_size(unsigned long *size);
-int pdc_stable_verify_contents(void);
-int pdc_stable_initialize(void);
-
-int pdc_pci_irt_size(unsigned long *num_entries, unsigned long hpa);
-int pdc_pci_irt(unsigned long num_entries, unsigned long hpa, void *tbl);
-
-int pdc_get_initiator(struct hardware_path *, struct pdc_initiator *);
-int pdc_tod_read(struct pdc_tod *tod);
-int pdc_tod_set(unsigned long sec, unsigned long usec);
-
-#ifdef CONFIG_64BIT
-int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr,
- struct pdc_memory_table *tbl, unsigned long entries);
-#endif
-
-void set_firmware_width(void);
-int pdc_do_firm_test_reset(unsigned long ftc_bitmap);
-int pdc_do_reset(void);
-int pdc_soft_power_info(unsigned long *power_reg);
-int pdc_soft_power_button(int sw_control);
-void pdc_io_reset(void);
-void pdc_io_reset_devices(void);
-int pdc_iodc_getc(void);
-void pdc_iodc_putc(unsigned char c);
-void pdc_iodc_outc(unsigned char c);
-void pdc_printf(const char *fmt, ...);
-
-void pdc_emergency_unlock(void);
-int pdc_sti_call(unsigned long func, unsigned long flags,
- unsigned long inptr, unsigned long outputr,
- unsigned long glob_cfg);
-
-static inline char * os_id_to_string(u16 os_id) {
- switch(os_id) {
- case OS_ID_NONE: return "No OS";
- case OS_ID_HPUX: return "HP-UX";
- case OS_ID_MPEXL: return "MPE-iX";
- case OS_ID_OSF: return "OSF";
- case OS_ID_HPRT: return "HP-RT";
- case OS_ID_NOVEL: return "Novell Netware";
- case OS_ID_LINUX: return "Linux";
- default: return "Unknown";
- }
-}
-#endif /* __ASSEMBLY__ */
+#endif /* !defined(__ASSEMBLY__) */
#endif /* _PARISC_PDC_H */
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, (unsigned long)pgd_val(e))
- /* Note: If you change ISTACK_SIZE, you need to change the corresponding
- * values in vmlinux.lds and vmlinux64.lds (init_istack section). Also,
- * the "order" and size need to agree.
- */
-
-#define ISTACK_SIZE 32768 /* Interrupt Stack Size */
-#define ISTACK_ORDER 3
-
/* This is the size of the initially mapped kernel memory */
#ifdef CONFIG_64BIT
#define KERNEL_INITIAL_ORDER 24 /* 0 to 1<<24 = 16MB */
* setup: the pgd is never bad, and a pmd always exists (as it's folded
* into the pgd entry)
*/
-extern inline int pgd_none(pgd_t pgd) { return 0; }
-extern inline int pgd_bad(pgd_t pgd) { return 0; }
-extern inline int pgd_present(pgd_t pgd) { return 1; }
-extern inline void pgd_clear(pgd_t * pgdp) { }
+static inline int pgd_none(pgd_t pgd) { return 0; }
+static inline int pgd_bad(pgd_t pgd) { return 0; }
+static inline int pgd_present(pgd_t pgd) { return 1; }
+static inline void pgd_clear(pgd_t * pgdp) { }
#endif
/*
* The following only work if pte_present() is true.
* Undefined behaviour if not..
*/
-extern inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
-extern inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
-extern inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; }
-extern inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
-
-extern inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
-extern inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
-extern inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) &= ~_PAGE_WRITE; return pte; }
-extern inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; }
-extern inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; }
-extern inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) |= _PAGE_WRITE; return pte; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; }
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
+
+static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) &= ~_PAGE_WRITE; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) |= _PAGE_WRITE; return pte; }
/*
* Conversion functions: convert a page and protection to a page entry,
return pte;
}
-extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; }
/* Permanent address of a page. On parisc we don't have highmem. */
#ifdef CONFIG_PREFETCH
#define ARCH_HAS_PREFETCH
-extern inline void prefetch(const void *addr)
+static inline void prefetch(const void *addr)
{
__asm__("ldw 0(%0), %%r0" : : "r" (addr));
}
/* LDD is a PA2.0 addition. */
#ifdef CONFIG_PA20
#define ARCH_HAS_PREFETCHW
-extern inline void prefetchw(const void *addr)
+static inline void prefetchw(const void *addr)
{
__asm__("ldd 0(%0), %%r0" : : "r" (addr));
}
long int days, rem, y;
const unsigned short int *ip;
- if(pdc_tod_read(&tod_data) < 0)
+ memset(wtime, 0, sizeof(*wtime));
+ if (pdc_tod_read(&tod_data) < 0)
return RTC_24H | RTC_BATT_BAD;
-
// most of the remainder of this function is:
// Copyright (C) 1991, 1993, 1997, 1998 Free Software Foundation, Inc.
// This was originally a part of the GNU C Library.
#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-extern inline void sema_init (struct semaphore *sem, int val)
+static inline void sema_init (struct semaphore *sem, int val)
{
*sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
}
* interrupts while we're messing with the semaphore. Sorry.
*/
-extern __inline__ void down(struct semaphore * sem)
+static inline void down(struct semaphore * sem)
{
might_sleep();
spin_lock_irq(&sem->sentry);
spin_unlock_irq(&sem->sentry);
}
-extern __inline__ int down_interruptible(struct semaphore * sem)
+static inline int down_interruptible(struct semaphore * sem)
{
int ret = 0;
might_sleep();
* down_trylock returns 0 on success, 1 if we failed to get the lock.
* May not sleep, but must preserve irq state
*/
-extern __inline__ int down_trylock(struct semaphore * sem)
+static inline int down_trylock(struct semaphore * sem)
{
unsigned long flags;
int count;
* Note! This is subtle. We jump to wake people up only if
* the semaphore was negative (== somebody was waiting on it).
*/
-extern __inline__ void up(struct semaphore * sem)
+static inline void up(struct semaphore * sem)
{
unsigned long flags;
#define __NR_signalfd (__NR_Linux + 302)
#define __NR_timerfd (__NR_Linux + 303)
#define __NR_eventfd (__NR_Linux + 304)
+#define __NR_fallocate (__NR_Linux + 305)
-#define __NR_Linux_syscalls (__NR_eventfd + 1)
+#define __NR_Linux_syscalls (__NR_fallocate + 1)
#define __IGNORE_select /* newselect */
# Random bits by Matt Mackall <mpm@selenic.com>
# M68k port by Geert Uytterhoeven and Andreas Schwab
# AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
+# PARISC port by Kyle McMartin <kyle@parisc-linux.org>
#
# Usage:
# objdump -d vmlinux | scripts/checkstack.pl [arch]
} elsif ($arch eq 'mips') {
#88003254: 27bdffe0 addiu sp,sp,-32
$re = qr/.*addiu.*sp,sp,-(([0-9]{2}|[3-9])[0-9]{2})/o;
+ } elsif ($arch eq 'parisc' || $arch eq 'parisc64') {
+ $re = qr/.*ldo ($x{1,8})\(sp\),sp/o;
} elsif ($arch eq 'ppc') {
#c00029f4: 94 21 ff 30 stwu r1,-208(r1)
$re = qr/.*stwu.*r1,-($x{1,8})\(r1\)/o;
git.openpandora.org / pandora-kernel.git / commitdiff