tile: Move the Tilera driver

Move the Tilera driver into drivers/net/ethernet/tile and
make the necessary Kconfig and Makefile changes.

Updated the Kconfig so that the options defualt to y if TILE kernel.

CC: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/MAINTAINERS b/MAINTAINERS
index dfa4269..3d8a6a6 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6411,7 +6411,7 @@ W:        http://www.tilera.com/scm/
 S:     Supported
 F:     arch/tile/
 F:     drivers/tty/hvc/hvc_tile.c
-F:     drivers/net/tile/
+F:     drivers/net/ethernet/tile/
 F:     drivers/edac/tile_edac.c
 
 TLAN NETWORK DRIVER

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c83a1c0..3a1fd2c 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -328,18 +328,6 @@ source "drivers/s390/net/Kconfig"
 
 source "drivers/net/caif/Kconfig"
 
-config TILE_NET
-       tristate "Tilera GBE/XGBE network driver support"
-       depends on TILE
-       default y
-       select CRC32
-       help
-         This is a standard Linux network device driver for the
-         on-chip Tilera Gigabit Ethernet and XAUI interfaces.
-
-         To compile this driver as a module, choose M here: the module
-         will be called tile_net.
-
 config XEN_NETDEV_FRONTEND
        tristate "Xen network device frontend driver"
        depends on XEN

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 620abd7..fcc62e6 100644 (file)
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -79,5 +79,3 @@ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
 
 obj-$(CONFIG_WIMAX) += wimax/
 obj-$(CONFIG_CAIF) += caif/
-
-obj-$(CONFIG_TILE_NET) += tile/

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index f011665..cff6ef5 100644 (file)
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -156,6 +156,7 @@ source "drivers/net/ethernet/stmicro/Kconfig"
 source "drivers/net/ethernet/sun/Kconfig"
 source "drivers/net/ethernet/tehuti/Kconfig"
 source "drivers/net/ethernet/ti/Kconfig"
+source "drivers/net/ethernet/tile/Kconfig"
 source "drivers/net/ethernet/toshiba/Kconfig"
 source "drivers/net/ethernet/tundra/Kconfig"
 source "drivers/net/ethernet/via/Kconfig"

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 7f3b73c..986def7 100644 (file)
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
 obj-$(CONFIG_NET_VENDOR_SUN) += sun/
 obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
 obj-$(CONFIG_NET_VENDOR_TI) += ti/
+obj-$(CONFIG_TILE_NET) += tile/
 obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/
 obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundra/
 obj-$(CONFIG_NET_VENDOR_VIA) += via/

diff --git a/drivers/net/ethernet/tile/Kconfig b/drivers/net/ethernet/tile/Kconfig
new file mode 100644 (file)
index 0000000..2d9218f
--- /dev/null
+++ b/drivers/net/ethernet/tile/Kconfig
@@ -0,0 +1,15 @@
+#
+# Tilera network device configuration
+#
+
+config TILE_NET
+       tristate "Tilera GBE/XGBE network driver support"
+       depends on TILE
+       default y
+       select CRC32
+       ---help---
+         This is a standard Linux network device driver for the
+         on-chip Tilera Gigabit Ethernet and XAUI interfaces.
+
+         To compile this driver as a module, choose M here: the module
+         will be called tile_net.

diff --git a/drivers/net/tile/Makefile b/drivers/net/ethernet/tile/Makefile
similarity index 100%
rename from drivers/net/tile/Makefile
rename to drivers/net/ethernet/tile/Makefile

diff --git a/drivers/net/tile/tilepro.c b/drivers/net/ethernet/tile/tilepro.c
similarity index 100%
rename from drivers/net/tile/tilepro.c
rename to drivers/net/ethernet/tile/tilepro.c