powerpc/4xx: Add L2 cache node to AMCC Canyonlands dts file

With this patch the L2 cache is enabled on Canyonlands to increase the
overall performance. There is a known cache coherency issue with the L2
cache, but this is related to the high bandwidth (HB) PLB segment where
the memory address is 0x8.xxxx.xxxx (low bandwidth PLB segment is mapped
to 0x0.xxxx.xxxx). Since this HB address is currently unused it is safe
to enable the L2 cache.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index 0c6d318..8b5ba82 100644 (file)
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -40,6 +40,7 @@
                        d-cache-size = <32768>;
                        dcr-controller;
                        dcr-access-method = "native";
+                       next-level-cache = <&L2C0>;
                };
        };
 
@@ -104,6 +105,16 @@
                dcr-reg = <0x00c 0x002>;
        };
 
+       L2C0: l2c {
+               compatible = "ibm,l2-cache-460ex", "ibm,l2-cache";
+               dcr-reg = <0x020 0x008          /* Internal SRAM DCR's */
+                          0x030 0x008>;        /* L2 cache DCR's */
+               cache-line-size = <32>;         /* 32 bytes */
+               cache-size = <262144>;          /* L2, 256K */
+               interrupt-parent = <&UIC1>;
+               interrupts = <11 1>;
+       };
+
        plb {
                compatible = "ibm,plb-460ex", "ibm,plb4";
                #address-cells = <2>;