ARM: mmci: avoid unnecessary switch to data available PIO interrupts

We don't need to switch to data available interrupts if there's at
least half a FIFO depth worth of data remaining, as we'll still get
the FIFO half full interrupt.  Keep this interrupt masked off until
we have less than half the FIFO depth worth of data remaining.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 2563792..bde170d 100644 (file)
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -224,10 +224,11 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
                irqmask = MCI_RXFIFOHALFFULLMASK;
 
                /*
-                * If we have less than a FIFOSIZE of bytes to transfer,
-                * trigger a PIO interrupt as soon as any data is available.
+                * If we have less than the fifo 'half-full' threshold to
+                * transfer, trigger a PIO interrupt as soon as any data
+                * is available.
                 */
-               if (host->size < variant->fifosize)
+               if (host->size < variant->fifohalfsize)
                        irqmask |= MCI_RXDATAAVLBLMASK;
        } else {
                /*
@@ -502,10 +503,10 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
        local_irq_restore(flags);
 
        /*
-        * If we're nearing the end of the read, switch to
-        * "any data available" mode.
+        * If we have less than the fifo 'half-full' threshold to transfer,
+        * trigger a PIO interrupt as soon as any data is available.
         */
-       if (status & MCI_RXACTIVE && host->size < variant->fifosize)
+       if (status & MCI_RXACTIVE && host->size < variant->fifohalfsize)
                mmci_set_mask1(host, MCI_RXDATAAVLBLMASK);
 
        /*