ath9k_hw: remove pCap->reg_cap

It is not used anywhere and seems pointless

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 625ad0b..be22574 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1932,23 +1932,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
        else
                pCap->hw_caps |= ATH9K_HW_CAP_4KB_SPLITTRANS;
 
-       if (regulatory->current_rd_ext & (1 << REG_EXT_JAPAN_MIDBAND)) {
-               pCap->reg_cap =
-                       AR_EEPROM_EEREGCAP_EN_KK_NEW_11A |
-                       AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN |
-                       AR_EEPROM_EEREGCAP_EN_KK_U2 |
-                       AR_EEPROM_EEREGCAP_EN_KK_MIDBAND;
-       } else {
-               pCap->reg_cap =
-                       AR_EEPROM_EEREGCAP_EN_KK_NEW_11A |
-                       AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN;
-       }
-
-       /* Advertise midband for AR5416 with FCC midband set in eeprom */
-       if (regulatory->current_rd_ext & (1 << REG_EXT_FCC_MIDBAND) &&
-           AR_SREV_5416(ah))
-               pCap->reg_cap |= AR_EEPROM_EEREGCAP_EN_FCC_MIDBAND;
-
        if (AR_SREV_9280_20_OR_LATER(ah) && common->btcoex_enabled) {
                btcoex_hw->btactive_gpio = ATH_BTACTIVE_GPIO;
                btcoex_hw->wlanactive_gpio = ATH_WLANACTIVE_GPIO;

diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 7bbf701..a255f9a 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -200,7 +200,6 @@ struct ath9k_hw_capabilities {
        u8 max_txchains;
        u8 max_rxchains;
        u16 tx_triglevel_max;
-       u16 reg_cap;
        u8 num_gpio_pins;
        u8 rx_hp_qdepth;
        u8 rx_lp_qdepth;