USB: sierra: do not resume I/O on closing ports

Use tty-port initialised flag rather than private flag to determine when
port is closing down.

Since the tty-port flag is set prior to dropping DTR/RTS (when HUPCL is
set) this avoid submitting the read urbs when resuming the interface in
dtr_rts() only to immediately kill them again in shutdown().

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index be4a759..6f7f01e 100644 (file)
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -316,7 +316,6 @@ struct sierra_port_private {
        int dsr_state;
        int dcd_state;
        int ri_state;
-       unsigned int opened:1;
 };
 
 static int sierra_send_setup(struct usb_serial_port *port)
@@ -769,8 +768,11 @@ static void sierra_close(struct usb_serial_port *port)
 
        portdata = usb_get_serial_port_data(port);
 
+       /*
+        * Need to take susp_lock to make sure port is not already being
+        * resumed, but no need to hold it due to ASYNC_INITIALIZED.
+        */
        spin_lock_irq(&intfdata->susp_lock);
-       portdata->opened = 0;
        if (--intfdata->open_ports == 0)
                serial->interface->needs_remote_wakeup = 0;
        spin_unlock_irq(&intfdata->susp_lock);
@@ -826,7 +828,6 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port)
                goto err_submit;
 
        spin_lock_irq(&intfdata->susp_lock);
-       portdata->opened = 1;
        if (++intfdata->open_ports == 1)
                serial->interface->needs_remote_wakeup = 1;
        spin_unlock_irq(&intfdata->susp_lock);
@@ -1025,16 +1026,14 @@ static int sierra_resume(struct usb_serial *serial)
 {
        struct usb_serial_port *port;
        struct sierra_intf_private *intfdata = usb_get_serial_data(serial);
-       struct sierra_port_private *portdata;
        int ec = 0;
        int i, err;
 
        spin_lock_irq(&intfdata->susp_lock);
        for (i = 0; i < serial->num_ports; i++) {
                port = serial->port[i];
-               portdata = usb_get_serial_port_data(port);
 
-               if (!portdata || !portdata->opened)
+               if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags))
                        continue;
 
                err = sierra_submit_delayed_urbs(port);