davinci: DA850/OMAP-L138 EVM: implement autodetect of RMII PHY

Implement autodetection of RMII PHY by shifting the decision
to use the RMII PHY to da850_evm_ui_expander_setup() from
da850_evm_init() earlier.

Without this patch, selecting RMII PHY in the UI expander menu
will make the MII PHY unusable even though UI board is not
connected.

The actual configuration and registration of the EMAC device
is delayed to device_initcall() so it happens after the UI card
detection is complete.

A side effect of this patch is the removal of a voilation of
Documentation/SubmittingPatches section 2.2 in function
da850_evm_init()

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 23e2024..fd6f780 100644 (file)
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -148,10 +148,21 @@ static struct platform_device da850_evm_nandflash_device = {
 static u32 ui_card_detected;
 static void da850_evm_setup_nor_nand(void);
 
+#ifdef CONFIG_DA850_UI_RMII
+static inline void da850_evm_setup_emac_rmii(int rmii_sel)
+{
+       struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+       soc_info->emac_pdata->rmii_en = 1;
+       gpio_set_value(rmii_sel, 0);
+}
+#else
+static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
+#endif
+
 static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
                                                unsigned ngpio, void *c)
 {
-       struct davinci_soc_info *soc_info = &davinci_soc_info;
        int sel_a, sel_b, sel_c, ret;
 
        sel_a = gpio + 7;
@@ -186,9 +197,7 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
 
        da850_evm_setup_nor_nand();
 
-       if (soc_info->emac_pdata->rmii_en)
-               /* enable RMII */
-               gpio_set_value(sel_a, 0);
+       da850_evm_setup_emac_rmii(sel_a);
 
        return 0;
 
@@ -513,11 +522,16 @@ static const short da850_evm_lcdc_pins[] = {
        -1
 };
 
-static int __init da850_evm_config_emac(u8 rmii_en)
+static int __init da850_evm_config_emac(void)
 {
        void __iomem *cfg_chip3_base;
        int ret;
        u32 val;
+       struct davinci_soc_info *soc_info = &davinci_soc_info;
+       u8 rmii_en = soc_info->emac_pdata->rmii_en;
+
+       if (!machine_is_davinci_da850_evm())
+               return 0;
 
        cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG);
 
@@ -562,12 +576,20 @@ static int __init da850_evm_config_emac(u8 rmii_en)
                                                        " functional\n");
        }
 
+       soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
+       soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
+
+       ret = da8xx_register_emac();
+       if (ret)
+               pr_warning("da850_evm_init: emac registration failed: %d\n",
+                               ret);
+
        return 0;
 }
+device_initcall(da850_evm_config_emac);
 
 static __init void da850_evm_init(void)
 {
-       struct davinci_soc_info *soc_info = &davinci_soc_info;
        int ret;
 
        ret = pmic_tps65070_init();
@@ -590,22 +612,6 @@ static __init void da850_evm_init(void)
                pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
                                ret);
 
-       soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
-       soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
-#ifdef CONFIG_DA850_UI_RMII
-       soc_info->emac_pdata->rmii_en = 1;
-#else
-       soc_info->emac_pdata->rmii_en = 0;
-#endif
-
-       ret = da850_evm_config_emac(soc_info->emac_pdata->rmii_en);
-       if (ret)
-               pr_warning("da850_evm_init: emac setup failed: %d\n", ret);
-
-       ret = da8xx_register_emac();
-       if (ret)
-               pr_warning("da850_evm_init: emac registration failed: %d\n",
-                               ret);
 
        ret = da8xx_register_watchdog();
        if (ret)