fsl_mx3_udc: Add i.MX35 support

The i.MX35 works fine with this driver, but we do not have
the usb_ahb clock.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

diff --git a/drivers/usb/gadget/fsl_mx3_udc.c b/drivers/usb/gadget/fsl_mx3_udc.c
index 4bc2bf3..20a802e 100644 (file)
--- a/drivers/usb/gadget/fsl_mx3_udc.c
+++ b/drivers/usb/gadget/fsl_mx3_udc.c
@@ -17,6 +17,8 @@
 #include <linux/fsl_devices.h>
 #include <linux/platform_device.h>
 
+#include <mach/hardware.h>
+
 static struct clk *mxc_ahb_clk;
 static struct clk *mxc_usb_clk;
 
@@ -28,14 +30,16 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 
        pdata = pdev->dev.platform_data;
 
-       mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
-       if (IS_ERR(mxc_ahb_clk))
-               return PTR_ERR(mxc_ahb_clk);
+       if (!cpu_is_mx35()) {
+               mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
+               if (IS_ERR(mxc_ahb_clk))
+                       return PTR_ERR(mxc_ahb_clk);
 
-       ret = clk_enable(mxc_ahb_clk);
-       if (ret < 0) {
-               dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
-               goto eenahb;
+               ret = clk_enable(mxc_ahb_clk);
+               if (ret < 0) {
+                       dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
+                       goto eenahb;
+               }
        }
 
        /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
@@ -50,6 +54,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
        if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
            (freq < 59999000 || freq > 60001000)) {
                dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
+               ret = -EINVAL;
                goto eclkrate;
        }
 
@@ -66,9 +71,11 @@ eclkrate:
        clk_put(mxc_usb_clk);
        mxc_usb_clk = NULL;
 egusb:
-       clk_disable(mxc_ahb_clk);
+       if (!cpu_is_mx35())
+               clk_disable(mxc_ahb_clk);
 eenahb:
-       clk_put(mxc_ahb_clk);
+       if (!cpu_is_mx35())
+               clk_put(mxc_ahb_clk);
        return ret;
 }
 
@@ -90,6 +97,8 @@ void fsl_udc_clk_release(void)
                clk_disable(mxc_usb_clk);
                clk_put(mxc_usb_clk);
        }
-       clk_disable(mxc_ahb_clk);
-       clk_put(mxc_ahb_clk);
+       if (!cpu_is_mx35()) {
+               clk_disable(mxc_ahb_clk);
+               clk_put(mxc_ahb_clk);
+       }
 }