--- /dev/null
+
+unshare system call:
+--------------------
+This document describes the new system call, unshare. The document
+provides an overview of the feature, why it is needed, how it can
+be used, its interface specification, design, implementation and
+how it can be tested.
+
+Change Log:
+-----------
+version 0.1 Initial document, Janak Desai (janak@us.ibm.com), Jan 11, 2006
+
+Contents:
+---------
+ 1) Overview
+ 2) Benefits
+ 3) Cost
+ 4) Requirements
+ 5) Functional Specification
+ 6) High Level Design
+ 7) Low Level Design
+ 8) Test Specification
+ 9) Future Work
+
+1) Overview
+-----------
+Most legacy operating system kernels support an abstraction of threads
+as multiple execution contexts within a process. These kernels provide
+special resources and mechanisms to maintain these "threads". The Linux
+kernel, in a clever and simple manner, does not make distinction
+between processes and "threads". The kernel allows processes to share
+resources and thus they can achieve legacy "threads" behavior without
+requiring additional data structures and mechanisms in the kernel. The
+power of implementing threads in this manner comes not only from
+its simplicity but also from allowing application programmers to work
+outside the confinement of all-or-nothing shared resources of legacy
+threads. On Linux, at the time of thread creation using the clone system
+call, applications can selectively choose which resources to share
+between threads.
+
+unshare system call adds a primitive to the Linux thread model that
+allows threads to selectively 'unshare' any resources that were being
+shared at the time of their creation. unshare was conceptualized by
+Al Viro in the August of 2000, on the Linux-Kernel mailing list, as part
+of the discussion on POSIX threads on Linux. unshare augments the
+usefulness of Linux threads for applications that would like to control
+shared resources without creating a new process. unshare is a natural
+addition to the set of available primitives on Linux that implement
+the concept of process/thread as a virtual machine.
+
+2) Benefits
+-----------
+unshare would be useful to large application frameworks such as PAM
+where creating a new process to control sharing/unsharing of process
+resources is not possible. Since namespaces are shared by default
+when creating a new process using fork or clone, unshare can benefit
+even non-threaded applications if they have a need to disassociate
+from default shared namespace. The following lists two use-cases
+where unshare can be used.
+
+2.1 Per-security context namespaces
+-----------------------------------
+unshare can be used to implement polyinstantiated directories using
+the kernel's per-process namespace mechanism. Polyinstantiated directories,
+such as per-user and/or per-security context instance of /tmp, /var/tmp or
+per-security context instance of a user's home directory, isolate user
+processes when working with these directories. Using unshare, a PAM
+module can easily setup a private namespace for a user at login.
+Polyinstantiated directories are required for Common Criteria certification
+with Labeled System Protection Profile, however, with the availability
+of shared-tree feature in the Linux kernel, even regular Linux systems
+can benefit from setting up private namespaces at login and
+polyinstantiating /tmp, /var/tmp and other directories deemed
+appropriate by system administrators.
+
+2.2 unsharing of virtual memory and/or open files
+-------------------------------------------------
+Consider a client/server application where the server is processing
+client requests by creating processes that share resources such as
+virtual memory and open files. Without unshare, the server has to
+decide what needs to be shared at the time of creating the process
+which services the request. unshare allows the server an ability to
+disassociate parts of the context during the servicing of the
+request. For large and complex middleware application frameworks, this
+ability to unshare after the process was created can be very
+useful.
+
+3) Cost
+-------
+In order to not duplicate code and to handle the fact that unshare
+works on an active task (as opposed to clone/fork working on a newly
+allocated inactive task) unshare had to make minor reorganizational
+changes to copy_* functions utilized by clone/fork system call.
+There is a cost associated with altering existing, well tested and
+stable code to implement a new feature that may not get exercised
+extensively in the beginning. However, with proper design and code
+review of the changes and creation of an unshare test for the LTP
+the benefits of this new feature can exceed its cost.
+
+4) Requirements
+---------------
+unshare reverses sharing that was done using clone(2) system call,
+so unshare should have a similar interface as clone(2). That is,
+since flags in clone(int flags, void *stack) specifies what should
+be shared, similar flags in unshare(int flags) should specify
+what should be unshared. Unfortunately, this may appear to invert
+the meaning of the flags from the way they are used in clone(2).
+However, there was no easy solution that was less confusing and that
+allowed incremental context unsharing in future without an ABI change.
+
+unshare interface should accommodate possible future addition of
+new context flags without requiring a rebuild of old applications.
+If and when new context flags are added, unshare design should allow
+incremental unsharing of those resources on an as needed basis.
+
+5) Functional Specification
+---------------------------
+NAME
+ unshare - disassociate parts of the process execution context
+
+SYNOPSIS
+ #include <sched.h>
+
+ int unshare(int flags);
+
+DESCRIPTION
+ unshare allows a process to disassociate parts of its execution
+ context that are currently being shared with other processes. Part
+ of execution context, such as the namespace, is shared by default
+ when a new process is created using fork(2), while other parts,
+ such as the virtual memory, open file descriptors, etc, may be
+ shared by explicit request to share them when creating a process
+ using clone(2).
+
+ The main use of unshare is to allow a process to control its
+ shared execution context without creating a new process.
+
+ The flags argument specifies one or bitwise-or'ed of several of
+ the following constants.
+
+ CLONE_FS
+ If CLONE_FS is set, file system information of the caller
+ is disassociated from the shared file system information.
+
+ CLONE_FILES
+ If CLONE_FILES is set, the file descriptor table of the
+ caller is disassociated from the shared file descriptor
+ table.
+
+ CLONE_NEWNS
+ If CLONE_NEWNS is set, the namespace of the caller is
+ disassociated from the shared namespace.
+
+ CLONE_VM
+ If CLONE_VM is set, the virtual memory of the caller is
+ disassociated from the shared virtual memory.
+
+RETURN VALUE
+ On success, zero returned. On failure, -1 is returned and errno is
+
+ERRORS
+ EPERM CLONE_NEWNS was specified by a non-root process (process
+ without CAP_SYS_ADMIN).
+
+ ENOMEM Cannot allocate sufficient memory to copy parts of caller's
+ context that need to be unshared.
+
+ EINVAL Invalid flag was specified as an argument.
+
+CONFORMING TO
+ The unshare() call is Linux-specific and should not be used
+ in programs intended to be portable.
+
+SEE ALSO
+ clone(2), fork(2)
+
+6) High Level Design
+--------------------
+Depending on the flags argument, the unshare system call allocates
+appropriate process context structures, populates it with values from
+the current shared version, associates newly duplicated structures
+with the current task structure and releases corresponding shared
+versions. Helper functions of clone (copy_*) could not be used
+directly by unshare because of the following two reasons.
+ 1) clone operates on a newly allocated not-yet-active task
+ structure, where as unshare operates on the current active
+ task. Therefore unshare has to take appropriate task_lock()
+ before associating newly duplicated context structures
+ 2) unshare has to allocate and duplicate all context structures
+ that are being unshared, before associating them with the
+ current task and releasing older shared structures. Failure
+ do so will create race conditions and/or oops when trying
+ to backout due to an error. Consider the case of unsharing
+ both virtual memory and namespace. After successfully unsharing
+ vm, if the system call encounters an error while allocating
+ new namespace structure, the error return code will have to
+ reverse the unsharing of vm. As part of the reversal the
+ system call will have to go back to older, shared, vm
+ structure, which may not exist anymore.
+
+Therefore code from copy_* functions that allocated and duplicated
+current context structure was moved into new dup_* functions. Now,
+copy_* functions call dup_* functions to allocate and duplicate
+appropriate context structures and then associate them with the
+task structure that is being constructed. unshare system call on
+the other hand performs the following:
+ 1) Check flags to force missing, but implied, flags
+ 2) For each context structure, call the corresponding unshare
+ helper function to allocate and duplicate a new context
+ structure, if the appropriate bit is set in the flags argument.
+ 3) If there is no error in allocation and duplication and there
+ are new context structures then lock the current task structure,
+ associate new context structures with the current task structure,
+ and release the lock on the current task structure.
+ 4) Appropriately release older, shared, context structures.
+
+7) Low Level Design
+-------------------
+Implementation of unshare can be grouped in the following 4 different
+items:
+ a) Reorganization of existing copy_* functions
+ b) unshare system call service function
+ c) unshare helper functions for each different process context
+ d) Registration of system call number for different architectures
+
+ 7.1) Reorganization of copy_* functions
+ Each copy function such as copy_mm, copy_namespace, copy_files,
+ etc, had roughly two components. The first component allocated
+ and duplicated the appropriate structure and the second component
+ linked it to the task structure passed in as an argument to the copy
+ function. The first component was split into its own function.
+ These dup_* functions allocated and duplicated the appropriate
+ context structure. The reorganized copy_* functions invoked
+ their corresponding dup_* functions and then linked the newly
+ duplicated structures to the task structure with which the
+ copy function was called.
+
+ 7.2) unshare system call service function
+ * Check flags
+ Force implied flags. If CLONE_THREAD is set force CLONE_VM.
+ If CLONE_VM is set, force CLONE_SIGHAND. If CLONE_SIGHAND is
+ set and signals are also being shared, force CLONE_THREAD. If
+ CLONE_NEWNS is set, force CLONE_FS.
+ * For each context flag, invoke the corresponding unshare_*
+ helper routine with flags passed into the system call and a
+ reference to pointer pointing the new unshared structure
+ * If any new structures are created by unshare_* helper
+ functions, take the task_lock() on the current task,
+ modify appropriate context pointers, and release the
+ task lock.
+ * For all newly unshared structures, release the corresponding
+ older, shared, structures.
+
+ 7.3) unshare_* helper functions
+ For unshare_* helpers corresponding to CLONE_SYSVSEM, CLONE_SIGHAND,
+ and CLONE_THREAD, return -EINVAL since they are not implemented yet.
+ For others, check the flag value to see if the unsharing is
+ required for that structure. If it is, invoke the corresponding
+ dup_* function to allocate and duplicate the structure and return
+ a pointer to it.
+
+ 7.4) Appropriately modify architecture specific code to register the
+ the new system call.
+
+8) Test Specification
+---------------------
+The test for unshare should test the following:
+ 1) Valid flags: Test to check that clone flags for signal and
+ signal handlers, for which unsharing is not implemented
+ yet, return -EINVAL.
+ 2) Missing/implied flags: Test to make sure that if unsharing
+ namespace without specifying unsharing of filesystem, correctly
+ unshares both namespace and filesystem information.
+ 3) For each of the four (namespace, filesystem, files and vm)
+ supported unsharing, verify that the system call correctly
+ unshares the appropriate structure. Verify that unsharing
+ them individually as well as in combination with each
+ other works as expected.
+ 4) Concurrent execution: Use shared memory segments and futex on
+ an address in the shm segment to synchronize execution of
+ about 10 threads. Have a couple of threads execute execve,
+ a couple _exit and the rest unshare with different combination
+ of flags. Verify that unsharing is performed as expected and
+ that there are no oops or hangs.
+
+9) Future Work
+--------------
+The current implementation of unshare does not allow unsharing of
+signals and signal handlers. Signals are complex to begin with and
+to unshare signals and/or signal handlers of a currently running
+process is even more complex. If in the future there is a specific
+need to allow unsharing of signals and/or signal handlers, it can
+be incrementally added to unshare without affecting legacy
+applications using unshare.
+
41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile) [0070:9800,0070:9802]
42 -> digitalnow DNTV Live! DVB-T Pro [1822:0025]
43 -> KWorld/VStream XPert DVB-T with cx22702 [17de:08a1]
- 44 -> DViCO FusionHDTV DVB-T Dual Digital [18ac:db50]
+ 44 -> DViCO FusionHDTV DVB-T Dual Digital [18ac:db50,18ac:db54]
0 -> UNKNOWN/GENERIC
1 -> Proteus Pro [philips reference design] [1131:2001,1131:2001]
2 -> LifeView FlyVIDEO3000 [5168:0138,4e42:0138]
- 3 -> LifeView FlyVIDEO2000 [5168:0138]
+ 3 -> LifeView/Typhoon FlyVIDEO2000 [5168:0138,4e42:0138]
4 -> EMPRESS [1131:6752]
5 -> SKNet Monster TV [1131:4e85]
6 -> Tevion MD 9717
52 -> AverMedia AverTV/305 [1461:2108]
53 -> ASUS TV-FM 7135 [1043:4845]
54 -> LifeView FlyTV Platinum FM [5168:0214,1489:0214]
- 55 -> LifeView FlyDVB-T DUO [5168:0502,5168:0306]
+ 55 -> LifeView FlyDVB-T DUO [5168:0306]
56 -> Avermedia AVerTV 307 [1461:a70a]
57 -> Avermedia AVerTV GO 007 FM [1461:f31f]
58 -> ADS Tech Instant TV (saa7135) [1421:0350,1421:0351,1421:0370,1421:1370]
59 -> Kworld/Tevion V-Stream Xpert TV PVR7134
- 60 -> Typhoon DVB-T Duo Digital/Analog Cardbus [4e42:0502]
+ 60 -> LifeView/Typhoon FlyDVB-T Duo Cardbus [5168:0502,4e42:0502]
61 -> Philips TOUGH DVB-T reference design [1131:2004]
62 -> Compro VideoMate TV Gold+II
63 -> Kworld Xpert TV PVR7134
BTTV VIDEO4LINUX DRIVER
P: Mauro Carvalho Chehab
-M: mchehab@brturbo.com.br
+M: mchehab@infradead.org
+M: v4l-dvb-maintainer@linuxtv.org
L: video4linux-list@redhat.com
W: http://linuxtv.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
DVB SUBSYSTEM AND DRIVERS
P: LinuxTV.org Project
-M: linux-dvb-maintainer@linuxtv.org
+M: mchehab@infradead.org
+M: v4l-dvb-maintainer@linuxtv.org
L: linux-dvb@linuxtv.org (subscription required)
W: http://linuxtv.org/
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
-S: Supported
+S: Maintained
EATA-DMA SCSI DRIVER
P: Michael Neuffer
VIDEO FOR LINUX
P: Mauro Carvalho Chehab
-M: mchehab@brturbo.com.br
+M: mchehab@infradead.org
+M: v4l-dvb-maintainer@linuxtv.org
L: video4linux-list@redhat.com
W: http://linuxtv.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
config %config: scripts_basic outputmakefile FORCE
$(Q)mkdir -p include/linux
$(Q)$(MAKE) $(build)=scripts/kconfig $@
- $(Q)$(MAKE) .kernelrelease
+ $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= .kernelrelease
else
# ===========================================================================
@ln -sfn $(SRC_ARCH)/$(SARCH)/lib $(SRC_ARCH)/lib
@ln -sfn $(SRC_ARCH)/$(SARCH) $(SRC_ARCH)/arch
@ln -sfn $(SRC_ARCH)/$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S
- @ln -sfn $(SRC_ARCH)/$(SARCH)/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c
+ @ln -sfn $(SRC_ARCH)/$(SARCH)/kernel/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c
@touch $@
# Create link to sub arch includes
* completely.
* But only ack when the APIC is enabled -AK
*/
- if (!cpu_has_apic)
+ if (cpu_has_apic)
ack_APIC_irq();
}
.long sys_faccessat
.long sys_pselect6
.long sys_ppoll
+ .long sys_unshare /* 310 */
default "7" if MCKINLEY
default "6" if ITANIUM
-# align cache-sensitive data to 64 bytes
config IA64_CYCLONE
bool "Cyclone (EXA) Time Source support"
help
To use this option, you have to ensure that the "/proc file system
support" (CONFIG_PROC_FS) is enabled, too.
+config SGI_SN
+ def_bool y if (IA64_SGI_SN2 || IA64_GENERIC)
+
source "drivers/firmware/Kconfig"
source "fs/Kconfig.binfmt"
#include <linux/spinlock.h>
#include <linux/string.h>
+#include <asm/delay.h>
#include <asm/page.h>
#include <asm/sal.h>
#include <asm/pal.h>
static void __init sal_desc_ap_wakeup(void *p) { }
#endif
+/*
+ * HP rx5670 firmware polls for interrupts during SAL_CACHE_FLUSH by reading
+ * cr.ivr, but it never writes cr.eoi. This leaves any interrupt marked as
+ * "in-service" and masks other interrupts of equal or lower priority.
+ *
+ * HP internal defect reports: F1859, F2775, F3031.
+ */
+static int sal_cache_flush_drops_interrupts;
+
+static void __init
+check_sal_cache_flush (void)
+{
+ unsigned long flags, itv;
+ int cpu;
+ u64 vector;
+
+ cpu = get_cpu();
+ local_irq_save(flags);
+
+ /*
+ * Schedule a timer interrupt, wait until it's reported, and see if
+ * SAL_CACHE_FLUSH drops it.
+ */
+ itv = ia64_get_itv();
+ BUG_ON((itv & (1 << 16)) == 0);
+
+ ia64_set_itv(IA64_TIMER_VECTOR);
+ ia64_set_itm(ia64_get_itc() + 1000);
+
+ while (!ia64_get_irr(IA64_TIMER_VECTOR))
+ cpu_relax();
+
+ ia64_sal_cache_flush(3);
+
+ if (ia64_get_irr(IA64_TIMER_VECTOR)) {
+ vector = ia64_get_ivr();
+ ia64_eoi();
+ WARN_ON(vector != IA64_TIMER_VECTOR);
+ } else {
+ sal_cache_flush_drops_interrupts = 1;
+ printk(KERN_ERR "SAL: SAL_CACHE_FLUSH drops interrupts; "
+ "PAL_CACHE_FLUSH will be used instead\n");
+ ia64_eoi();
+ }
+
+ ia64_set_itv(itv);
+ local_irq_restore(flags);
+ put_cpu();
+}
+
+s64
+ia64_sal_cache_flush (u64 cache_type)
+{
+ struct ia64_sal_retval isrv;
+
+ if (sal_cache_flush_drops_interrupts) {
+ unsigned long flags;
+ u64 progress;
+ s64 rc;
+
+ progress = 0;
+ local_irq_save(flags);
+ rc = ia64_pal_cache_flush(cache_type,
+ PAL_CACHE_FLUSH_INVALIDATE, &progress, NULL);
+ local_irq_restore(flags);
+ return rc;
+ }
+
+ SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0);
+ return isrv.status;
+}
+
void __init
ia64_sal_init (struct ia64_sal_systab *systab)
{
}
p += SAL_DESC_SIZE(*p);
}
+
+ check_sal_cache_flush();
}
int
# Makefile for the sn ia64 subplatform
#
-CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
-
obj-y += kernel/ pci/
# Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All Rights Reserved.
#
+CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
+
obj-y += setup.o bte.o bte_error.o irq.o mca.o idle.o \
huberror.o io_init.o iomv.o klconflib.o sn2/
obj-$(CONFIG_IA64_GENERIC) += machvec.o
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2000-2005 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <linux/config.h>
/* Initialize the notification to a known value. */
*bte->most_rcnt_na = BTE_WORD_BUSY;
- notif_phys_addr = TO_PHYS(ia64_tpa((unsigned long)bte->most_rcnt_na));
+ notif_phys_addr = (u64)bte->most_rcnt_na;
- if (is_shub2()) {
- src = SH2_TIO_PHYS_TO_DMA(src);
- dest = SH2_TIO_PHYS_TO_DMA(dest);
- notif_phys_addr = SH2_TIO_PHYS_TO_DMA(notif_phys_addr);
- }
/* Set the source and destination registers */
- BTE_PRINTKV(("IBSA = 0x%lx)\n", (TO_PHYS(src))));
- BTE_SRC_STORE(bte, TO_PHYS(src));
- BTE_PRINTKV(("IBDA = 0x%lx)\n", (TO_PHYS(dest))));
- BTE_DEST_STORE(bte, TO_PHYS(dest));
+ BTE_PRINTKV(("IBSA = 0x%lx)\n", src));
+ BTE_SRC_STORE(bte, src);
+ BTE_PRINTKV(("IBDA = 0x%lx)\n", dest));
+ BTE_DEST_STORE(bte, dest);
/* Set the notification register */
BTE_PRINTKV(("IBNA = 0x%lx)\n", notif_phys_addr));
* sn_fixup_ionodes() - This routine initializes the HUB data strcuture for
* each node in the system.
*/
-static void sn_fixup_ionodes(void)
+static void __init sn_fixup_ionodes(void)
{
struct sn_flush_device_kernel *sn_flush_device_kernel;
struct sn_flush_device_kernel *dev_entry;
pcidev_info->pdi_sn_irq_info = NULL;
kfree(sn_irq_info);
}
+
+ /*
+ * MSI currently not supported on altix. Remove this when
+ * the MSI abstraction patches are integrated into the kernel
+ * (sometime after 2.6.16 releases)
+ */
+ dev->no_msi = 1;
}
/*
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2000-2005 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <linux/irq.h>
#include <linux/spinlock.h>
+#include <linux/init.h>
#include <asm/sn/addrs.h>
#include <asm/sn/arch.h>
#include <asm/sn/intr.h>
static void sn_ack_irq(unsigned int irq)
{
- u64 event_occurred, mask = 0;
+ u64 event_occurred, mask;
irq = irq & 0xff;
- event_occurred =
- HUB_L((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED));
+ event_occurred = HUB_L((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED));
mask = event_occurred & SH_ALL_INT_MASK;
- HUB_S((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED_ALIAS),
- mask);
+ HUB_S((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED_ALIAS), mask);
__set_bit(irq, (volatile void *)pda->sn_in_service_ivecs);
- move_irq(irq);
+ move_native_irq(irq);
}
static void sn_end_irq(unsigned int irq)
pdacpu(cpu)->sn_last_irq = irq;
}
- if (pdacpu(cpu)->sn_first_irq == 0 || pdacpu(cpu)->sn_first_irq > irq) {
+ if (pdacpu(cpu)->sn_first_irq == 0 || pdacpu(cpu)->sn_first_irq > irq)
pdacpu(cpu)->sn_first_irq = irq;
- }
}
static void unregister_intr_pda(struct sn_irq_info *sn_irq_info)
list_add_rcu(&sn_irq_info->list, sn_irq_lh[sn_irq_info->irq_irq]);
spin_unlock(&sn_irq_info_lock);
- (void)register_intr_pda(sn_irq_info);
+ register_intr_pda(sn_irq_info);
}
void sn_irq_unfixup(struct pci_dev *pci_dev)
rcu_read_unlock();
}
-void sn_irq_lh_init(void)
+void __init sn_irq_lh_init(void)
{
int i;
INIT_LIST_HEAD(sn_irq_lh[i]);
}
-
}
position = MODULE_GET_BPOS(m);
if ((fmt == MODULE_FORMAT_BRIEF) || (fmt == MODULE_FORMAT_LCD)) {
- /* Brief module number format, eg. 002c15 */
+ /* Brief module number format, eg. 002c15 */
- /* Decompress the rack number */
- *buffer++ = '0' + RACK_GET_CLASS(rack);
- *buffer++ = '0' + RACK_GET_GROUP(rack);
- *buffer++ = '0' + RACK_GET_NUM(rack);
+ /* Decompress the rack number */
+ *buffer++ = '0' + RACK_GET_CLASS(rack);
+ *buffer++ = '0' + RACK_GET_GROUP(rack);
+ *buffer++ = '0' + RACK_GET_NUM(rack);
- /* Add the brick type */
- *buffer++ = brickchar;
+ /* Add the brick type */
+ *buffer++ = brickchar;
}
else if (fmt == MODULE_FORMAT_LONG) {
- /* Fuller hwgraph format, eg. rack/002/bay/15 */
+ /* Fuller hwgraph format, eg. rack/002/bay/15 */
- strcpy(buffer, "rack" "/"); buffer += strlen(buffer);
+ strcpy(buffer, "rack" "/"); buffer += strlen(buffer);
- *buffer++ = '0' + RACK_GET_CLASS(rack);
- *buffer++ = '0' + RACK_GET_GROUP(rack);
- *buffer++ = '0' + RACK_GET_NUM(rack);
+ *buffer++ = '0' + RACK_GET_CLASS(rack);
+ *buffer++ = '0' + RACK_GET_GROUP(rack);
+ *buffer++ = '0' + RACK_GET_NUM(rack);
- strcpy(buffer, "/" "bay" "/"); buffer += strlen(buffer);
+ strcpy(buffer, "/" "bay" "/"); buffer += strlen(buffer);
}
/* Add the bay position, using at least two digits */
if (position < 10)
- *buffer++ = '0';
+ *buffer++ = '0';
sprintf(buffer, "%d", position);
-
}
}
extern int platform_intr_list[];
-static int __initdata shub_1_1_found = 0;
+static int __initdata shub_1_1_found;
/*
* sn_check_for_wars
sn_prom_type = 2;
else
sn_prom_type = 1;
- printk("Running on medusa with %s PROM\n", (sn_prom_type == 1) ? "real" : "fake");
+ printk(KERN_INFO "Running on medusa with %s PROM\n",
+ (sn_prom_type == 1) ? "real" : "fake");
}
memset(pda, 0, sizeof(pda));
- if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2, &sn_hub_info->nasid_bitmask, &sn_hub_info->nasid_shift,
- &sn_system_size, &sn_sharing_domain_size, &sn_partition_id,
- &sn_coherency_id, &sn_region_size))
+ if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2,
+ &sn_hub_info->nasid_bitmask,
+ &sn_hub_info->nasid_shift,
+ &sn_system_size, &sn_sharing_domain_size,
+ &sn_partition_id, &sn_coherency_id,
+ &sn_region_size))
BUG();
sn_hub_info->as_shift = sn_hub_info->nasid_shift - 2;
for_each_online_node(node) {
kl_config_hdr_t *klgraph_header;
nasid = cnodeid_to_nasid(node);
- if ((klgraph_header = ia64_sn_get_klconfig_addr(nasid)) == NULL)
+ klgraph_header = ia64_sn_get_klconfig_addr(nasid);
+ if (klgraph_header == NULL)
BUG();
brd = NODE_OFFSET_TO_LBOARD(nasid, klgraph_header->ch_board_info);
while (brd) {
{
long cpu;
- for (cpu=0; cpu < NR_CPUS; cpu++)
+ for (cpu = 0; cpu < NR_CPUS; cpu++)
if (cpuid_to_nasid(cpu) == nasid &&
cpuid_to_slice(cpu) == slice)
return cpu;
# sn2 specific kernel files
#
+CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
+
obj-y += cache.o io.o ptc_deadlock.o sn2_smp.o sn_proc_fs.o \
prominfo_proc.o timer.o timer_interrupt.o sn_hwperf.o
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2000-2006 Silicon Graphics, Inc. All rights reserved.
*/
#include <linux/init.h>
static __cacheline_aligned DEFINE_SPINLOCK(sn2_global_ptc_lock);
-void sn2_ptc_deadlock_recovery(short *, short, int, volatile unsigned long *, unsigned long data0,
- volatile unsigned long *, unsigned long data1);
+void sn2_ptc_deadlock_recovery(short *, short, short, int, volatile unsigned long *, unsigned long,
+ volatile unsigned long *, unsigned long);
-#ifdef DEBUG_PTC
/*
- * ptctest:
- *
- * xyz - 3 digit hex number:
- * x - Force PTC purges to use shub:
- * 0 - no force
- * 1 - force
- * y - interupt enable
- * 0 - disable interrupts
- * 1 - leave interuupts enabled
- * z - type of lock:
- * 0 - global lock
- * 1 - node local lock
- * 2 - no lock
- *
- * Note: on shub1, only ptctest == 0 is supported. Don't try other values!
+ * Note: some is the following is captured here to make degugging easier
+ * (the macros make more sense if you see the debug patch - not posted)
*/
-
-static unsigned int sn2_ptctest = 0;
-
-static int __init ptc_test(char *str)
-{
- get_option(&str, &sn2_ptctest);
- return 1;
-}
-__setup("ptctest=", ptc_test);
-
-static inline int ptc_lock(unsigned long *flagp)
-{
- unsigned long opt = sn2_ptctest & 255;
-
- switch (opt) {
- case 0x00:
- spin_lock_irqsave(&sn2_global_ptc_lock, *flagp);
- break;
- case 0x01:
- spin_lock_irqsave(&sn_nodepda->ptc_lock, *flagp);
- break;
- case 0x02:
- local_irq_save(*flagp);
- break;
- case 0x10:
- spin_lock(&sn2_global_ptc_lock);
- break;
- case 0x11:
- spin_lock(&sn_nodepda->ptc_lock);
- break;
- case 0x12:
- break;
- default:
- BUG();
- }
- return opt;
-}
-
-static inline void ptc_unlock(unsigned long flags, int opt)
-{
- switch (opt) {
- case 0x00:
- spin_unlock_irqrestore(&sn2_global_ptc_lock, flags);
- break;
- case 0x01:
- spin_unlock_irqrestore(&sn_nodepda->ptc_lock, flags);
- break;
- case 0x02:
- local_irq_restore(flags);
- break;
- case 0x10:
- spin_unlock(&sn2_global_ptc_lock);
- break;
- case 0x11:
- spin_unlock(&sn_nodepda->ptc_lock);
- break;
- case 0x12:
- break;
- default:
- BUG();
- }
-}
-#else
-
#define sn2_ptctest 0
+#define local_node_uses_ptc_ga(sh1) ((sh1) ? 1 : 0)
+#define max_active_pio(sh1) ((sh1) ? 32 : 7)
+#define reset_max_active_on_deadlock() 1
+#define PTC_LOCK(sh1) ((sh1) ? &sn2_global_ptc_lock : &sn_nodepda->ptc_lock)
-static inline int ptc_lock(unsigned long *flagp)
+static inline void ptc_lock(int sh1, unsigned long *flagp)
{
- spin_lock_irqsave(&sn2_global_ptc_lock, *flagp);
- return 0;
+ spin_lock_irqsave(PTC_LOCK(sh1), *flagp);
}
-static inline void ptc_unlock(unsigned long flags, int opt)
+static inline void ptc_unlock(int sh1, unsigned long flags)
{
- spin_unlock_irqrestore(&sn2_global_ptc_lock, flags);
+ spin_unlock_irqrestore(PTC_LOCK(sh1), flags);
}
-#endif
struct ptc_stats {
unsigned long ptc_l;
unsigned long shub_ptc_flushes;
unsigned long nodes_flushed;
unsigned long deadlocks;
+ unsigned long deadlocks2;
unsigned long lock_itc_clocks;
unsigned long shub_itc_clocks;
unsigned long shub_itc_clocks_max;
+ unsigned long shub_ptc_flushes_not_my_mm;
};
static inline unsigned long wait_piowc(void)
{
- volatile unsigned long *piows, zeroval;
- unsigned long ws;
+ volatile unsigned long *piows;
+ unsigned long zeroval, ws;
piows = pda->pio_write_status_addr;
zeroval = pda->pio_write_status_val;
do {
cpu_relax();
} while (((ws = *piows) & SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK) != zeroval);
- return ws;
+ return (ws & SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK) != 0;
}
void sn_tlb_migrate_finish(struct mm_struct *mm)
{
- if (mm == current->mm)
+ /* flush_tlb_mm is inefficient if more than 1 users of mm */
+ if (mm == current->mm && mm && atomic_read(&mm->mm_users) == 1)
flush_tlb_mm(mm);
}
sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
unsigned long end, unsigned long nbits)
{
- int i, opt, shub1, cnode, mynasid, cpu, lcpu = 0, nasid, flushed = 0;
- int mymm = (mm == current->active_mm && current->mm);
+ int i, ibegin, shub1, cnode, mynasid, cpu, lcpu = 0, nasid;
+ int mymm = (mm == current->active_mm && mm == current->mm);
+ int use_cpu_ptcga;
volatile unsigned long *ptc0, *ptc1;
- unsigned long itc, itc2, flags, data0 = 0, data1 = 0, rr_value;
+ unsigned long itc, itc2, flags, data0 = 0, data1 = 0, rr_value, old_rr = 0;
short nasids[MAX_NUMNODES], nix;
nodemask_t nodes_flushed;
+ int active, max_active, deadlock;
nodes_clear(nodes_flushed);
i = 0;
mynasid = get_nasid();
+ use_cpu_ptcga = local_node_uses_ptc_ga(shub1);
+ max_active = max_active_pio(shub1);
itc = ia64_get_itc();
- opt = ptc_lock(&flags);
+ ptc_lock(shub1, &flags);
itc2 = ia64_get_itc();
+
__get_cpu_var(ptcstats).lock_itc_clocks += itc2 - itc;
__get_cpu_var(ptcstats).shub_ptc_flushes++;
__get_cpu_var(ptcstats).nodes_flushed += nix;
+ if (!mymm)
+ __get_cpu_var(ptcstats).shub_ptc_flushes_not_my_mm++;
+ if (use_cpu_ptcga && !mymm) {
+ old_rr = ia64_get_rr(start);
+ ia64_set_rr(start, (old_rr & 0xff) | (rr_value << 8));
+ ia64_srlz_d();
+ }
+
+ wait_piowc();
do {
if (shub1)
data1 = start | (1UL << SH1_PTC_1_START_SHFT);
else
data0 = (data0 & ~SH2_PTC_ADDR_MASK) | (start & SH2_PTC_ADDR_MASK);
- for (i = 0; i < nix; i++) {
+ deadlock = 0;
+ active = 0;
+ for (ibegin = 0, i = 0; i < nix; i++) {
nasid = nasids[i];
- if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid && mymm)) {
+ if (use_cpu_ptcga && unlikely(nasid == mynasid)) {
ia64_ptcga(start, nbits << 2);
ia64_srlz_i();
} else {
ptc0 = CHANGE_NASID(nasid, ptc0);
if (ptc1)
ptc1 = CHANGE_NASID(nasid, ptc1);
- pio_atomic_phys_write_mmrs(ptc0, data0, ptc1,
- data1);
- flushed = 1;
+ pio_atomic_phys_write_mmrs(ptc0, data0, ptc1, data1);
+ active++;
+ }
+ if (active >= max_active || i == (nix - 1)) {
+ if ((deadlock = wait_piowc())) {
+ sn2_ptc_deadlock_recovery(nasids, ibegin, i, mynasid, ptc0, data0, ptc1, data1);
+ if (reset_max_active_on_deadlock())
+ max_active = 1;
+ }
+ active = 0;
+ ibegin = i + 1;
}
}
- if (flushed
- && (wait_piowc() &
- (SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK))) {
- sn2_ptc_deadlock_recovery(nasids, nix, mynasid, ptc0, data0, ptc1, data1);
- }
-
start += (1UL << nbits);
-
} while (start < end);
itc2 = ia64_get_itc() - itc2;
if (itc2 > __get_cpu_var(ptcstats).shub_itc_clocks_max)
__get_cpu_var(ptcstats).shub_itc_clocks_max = itc2;
- ptc_unlock(flags, opt);
+ if (old_rr) {
+ ia64_set_rr(start, old_rr);
+ ia64_srlz_d();
+ }
+
+ ptc_unlock(shub1, flags);
preempt_enable();
}
* TLB flush transaction. The recovery sequence is somewhat tricky & is
* coded in assembly language.
*/
-void sn2_ptc_deadlock_recovery(short *nasids, short nix, int mynasid, volatile unsigned long *ptc0, unsigned long data0,
+void sn2_ptc_deadlock_recovery(short *nasids, short ib, short ie, int mynasid, volatile unsigned long *ptc0, unsigned long data0,
volatile unsigned long *ptc1, unsigned long data1)
{
- extern void sn2_ptc_deadlock_recovery_core(volatile unsigned long *, unsigned long,
+ extern unsigned long sn2_ptc_deadlock_recovery_core(volatile unsigned long *, unsigned long,
volatile unsigned long *, unsigned long, volatile unsigned long *, unsigned long);
short nasid, i;
- unsigned long *piows, zeroval;
+ unsigned long *piows, zeroval, n;
__get_cpu_var(ptcstats).deadlocks++;
piows = (unsigned long *) pda->pio_write_status_addr;
zeroval = pda->pio_write_status_val;
- for (i=0; i < nix; i++) {
+
+ for (i=ib; i <= ie; i++) {
nasid = nasids[i];
- if (!(sn2_ptctest & 3) && nasid == mynasid)
+ if (local_node_uses_ptc_ga(is_shub1()) && nasid == mynasid)
continue;
ptc0 = CHANGE_NASID(nasid, ptc0);
if (ptc1)
ptc1 = CHANGE_NASID(nasid, ptc1);
- sn2_ptc_deadlock_recovery_core(ptc0, data0, ptc1, data1, piows, zeroval);
+
+ n = sn2_ptc_deadlock_recovery_core(ptc0, data0, ptc1, data1, piows, zeroval);
+ __get_cpu_var(ptcstats).deadlocks2 += n;
}
}
cpu = *(loff_t *) data;
if (!cpu) {
- seq_printf(file, "# ptc_l change_rid shub_ptc_flushes shub_nodes_flushed deadlocks lock_nsec shub_nsec shub_nsec_max\n");
+ seq_printf(file,
+ "# cpu ptc_l newrid ptc_flushes nodes_flushed deadlocks lock_nsec shub_nsec shub_nsec_max not_my_mm deadlock2\n");
seq_printf(file, "# ptctest %d\n", sn2_ptctest);
}
if (cpu < NR_CPUS && cpu_online(cpu)) {
stat = &per_cpu(ptcstats, cpu);
- seq_printf(file, "cpu %d %ld %ld %ld %ld %ld %ld %ld %ld\n", cpu, stat->ptc_l,
+ seq_printf(file, "cpu %d %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld\n", cpu, stat->ptc_l,
stat->change_rid, stat->shub_ptc_flushes, stat->nodes_flushed,
stat->deadlocks,
1000 * stat->lock_itc_clocks / per_cpu(cpu_info, cpu).cyc_per_usec,
1000 * stat->shub_itc_clocks / per_cpu(cpu_info, cpu).cyc_per_usec,
- 1000 * stat->shub_itc_clocks_max / per_cpu(cpu_info, cpu).cyc_per_usec);
+ 1000 * stat->shub_itc_clocks_max / per_cpu(cpu_info, cpu).cyc_per_usec,
+ stat->shub_ptc_flushes_not_my_mm,
+ stat->deadlocks2);
}
-
return 0;
}
.show = sn2_ptc_seq_show
};
-int sn2_ptc_proc_open(struct inode *inode, struct file *file)
+static int sn2_ptc_proc_open(struct inode *inode, struct file *file)
{
return seq_open(file, &sn2_ptc_seq_ops);
}
spin_lock_irqsave(&part->act_lock, irq_flags);
- pid = kernel_thread(xpc_activating, (void *) ((u64) partid), 0);
-
DBUG_ON(part->act_state != XPC_P_INACTIVE);
- if (pid > 0) {
- part->act_state = XPC_P_ACTIVATION_REQ;
- XPC_SET_REASON(part, xpcCloneKThread, __LINE__);
- } else {
- XPC_SET_REASON(part, xpcCloneKThreadFailed, __LINE__);
- }
+ part->act_state = XPC_P_ACTIVATION_REQ;
+ XPC_SET_REASON(part, xpcCloneKThread, __LINE__);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
+
+ pid = kernel_thread(xpc_activating, (void *) ((u64) partid), 0);
+
+ if (unlikely(pid <= 0)) {
+ spin_lock_irqsave(&part->act_lock, irq_flags);
+ part->act_state = XPC_P_INACTIVE;
+ XPC_SET_REASON(part, xpcCloneKThreadFailed, __LINE__);
+ spin_unlock_irqrestore(&part->act_lock, irq_flags);
+ }
}
#
# Makefile for the sn pci general routines.
+CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
+
obj-y := pci_dma.o tioca_provider.o tioce_provider.o pcibr/
#
# Makefile for the sn2 io routines.
+CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
+
obj-y += pcibr_dma.o pcibr_reg.o \
pcibr_ate.o pcibr_provider.o
asmlinkage void ret_from_fork(void);
+/*
+ * The following aren't currently used.
+ */
+void (*pm_idle)(void);
+EXPORT_SYMBOL(pm_idle);
+
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
/*
* The idle loop on an m68knommu..
select SYS_HAS_CPU_R5000
select SYS_HAS_CPU_R10000 if BROKEN
select SYS_HAS_CPU_RM7000
+ select SYS_HAS_CPU_NEVADA
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
help
endif
CHECKFLAGS-y += -D__linux__ -D__mips__ \
+ -D_MIPS_SZINT=32 \
-D_ABIO32=1 \
-D_ABIN32=2 \
-D_ABI64=3
CHECKFLAGS-$(CONFIG_32BIT) += -D_MIPS_SIM=_ABIO32 \
-D_MIPS_SZLONG=32 \
+ -D_MIPS_SZPTR=32 \
-D__PTRDIFF_TYPE__=int
CHECKFLAGS-$(CONFIG_64BIT) += -m64 -D_MIPS_SIM=_ABI64 \
-D_MIPS_SZLONG=64 \
+ -D_MIPS_SZPTR=64 \
-D__PTRDIFF_TYPE__="long int"
CHECKFLAGS-$(CONFIG_CPU_BIG_ENDIAN) += -D__MIPSEB__
CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN) += -D__MIPSEL__
#
cflags-$(CONFIG_CPU_R3000) += \
$(call set_gccflags,r3000,mips1,r3000,mips1,mips1)
+CHECKFLAGS-$(CONFIG_CPU_R3000) += -D_MIPS_ISA=_MIPS_ISA_MIPS1
cflags-$(CONFIG_CPU_TX39XX) += \
$(call set_gccflags,r3900,mips1,r3000,mips1,mips1)
+CHECKFLAGS-$(CONFIG_CPU_TX39XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS1
cflags-$(CONFIG_CPU_R6000) += \
$(call set_gccflags,r6000,mips2,r6000,mips2,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_R6000) += -D_MIPS_ISA=_MIPS_ISA_MIPS2
cflags-$(CONFIG_CPU_R4300) += \
$(call set_gccflags,r4300,mips3,r4300,mips3,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_R4300) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
cflags-$(CONFIG_CPU_VR41XX) += \
$(call set_gccflags,r4100,mips3,r4600,mips3,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_VR41XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
cflags-$(CONFIG_CPU_R4X00) += \
$(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_R4X00) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
cflags-$(CONFIG_CPU_TX49XX) += \
$(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_TX49XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
cflags-$(CONFIG_CPU_MIPS32_R1) += \
$(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_MIPS32_R1) += -D_MIPS_ISA=_MIPS_ISA_MIPS32
cflags-$(CONFIG_CPU_MIPS32_R2) += \
$(call set_gccflags,mips32r2,mips32r2,r4600,mips3,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_MIPS32_R2) += -D_MIPS_ISA=_MIPS_ISA_MIPS32
cflags-$(CONFIG_CPU_MIPS64_R1) += \
$(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_MIPS64_R1) += -D_MIPS_ISA=_MIPS_ISA_MIPS64
cflags-$(CONFIG_CPU_MIPS64_R2) += \
$(call set_gccflags,mips64r2,mips64r2,r4600,mips3,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_MIPS64_R2) += -D_MIPS_ISA=_MIPS_ISA_MIPS64
cflags-$(CONFIG_CPU_R5000) += \
$(call set_gccflags,r5000,mips4,r5000,mips4,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_R5000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_R5432) += \
$(call set_gccflags,r5400,mips4,r5000,mips4,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_R5432) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_NEVADA) += \
$(call set_gccflags,rm5200,mips4,r5000,mips4,mips2) \
-Wa,--trap
-# $(call cc-option,-mmad)
+CHECKFLAGS-$(CONFIG_CPU_NEVADA) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_RM7000) += \
$(call set_gccflags,rm7000,mips4,r5000,mips4,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_RM7000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_RM9000) += \
$(call set_gccflags,rm9000,mips4,r5000,mips4,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_RM9000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_SB1) += \
$(call set_gccflags,sb1,mips64,r5000,mips4,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_SB1) += -D_MIPS_ISA=_MIPS_ISA_MIPS64
cflags-$(CONFIG_CPU_R8000) += \
$(call set_gccflags,r8000,mips4,r8000,mips4,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_R8000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_R10000) += \
$(call set_gccflags,r10000,mips4,r8000,mips4,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_R10000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
ifdef CONFIG_CPU_SB1
ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
# Cobalt Server
#
core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
-cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/cobalt
+cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/mach-cobalt
load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
#
}
set_c0_status(ST0_BEV | ST0_ERL);
- set_c0_config(CONF_CM_UNCACHED);
+ change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
flush_cache_all();
write_c0_wired(0);
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#endif
_machine_restart = au1000_restart;
_machine_halt = au1000_halt;
- _machine_power_off = au1000_power_off;
+ pm_power_off = au1000_power_off;
board_time_init = au1xxx_time_init;
board_timer_setup = au1xxx_timer_setup;
*/
#include <asm/asm.h>
#include <asm/mipsregs.h>
-#include <asm/cobalt/cobalt.h>
+#include <asm/mach-cobalt/cobalt.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
#include <asm/gt64120.h>
#include <asm/ptrace.h>
-#include <asm/cobalt/cobalt.h>
+#include <asm/mach-cobalt/cobalt.h>
extern void cobalt_handle_int(void);
#include <asm/reboot.h>
#include <asm/system.h>
#include <asm/mipsregs.h>
-#include <asm/cobalt/cobalt.h>
+#include <asm/mach-cobalt/cobalt.h>
void cobalt_machine_halt(void)
{
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1996, 1997, 2004 by Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1996, 1997, 2004, 05 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
*
*/
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/pm.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <asm/gt64120.h>
#include <asm/serial.h>
-#include <asm/cobalt/cobalt.h>
+#include <asm/mach-cobalt/cobalt.h>
extern void cobalt_machine_restart(char *command);
extern void cobalt_machine_halt(void);
_machine_restart = cobalt_machine_restart;
_machine_halt = cobalt_machine_halt;
- _machine_power_off = cobalt_machine_power_off;
+ pm_power_off = cobalt_machine_power_off;
board_timer_setup = cobalt_timer_setup;
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_HAS_CPU_NEVADA=y
CONFIG_SYS_HAS_CPU_RM7000=y
CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:07:00 2005
+# Linux kernel version: 2.6.16-rc2
+# Fri Feb 3 17:14:27 2006
#
CONFIG_MIPS=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
# CONFIG_BUG is not set
+CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_SHMEM is not set
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=1
+# CONFIG_SLOB is not set
#
# Loadable module support
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
# SCSI device support
#
-CONFIG_RAID_ATTRS=y
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
#
# PHY device support
#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
+# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+# CONFIG_MII is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_DM9000 is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
# SN Devices
#
+#
+# EDAC - error detection and reporting (RAS)
+#
+
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
#
# Cryptographic options
#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
# Library routines
#
# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+# CONFIG_LIBCRC32C is not set
#include <linux/ide.h>
#include <linux/ioport.h>
#include <linux/irq.h>
+#include <linux/pm.h>
#include <asm/addrspace.h>
#include <asm/bcache.h>
_machine_restart = ddb_machine_restart;
_machine_halt = ddb_machine_halt;
- _machine_power_off = ddb_machine_power_off;
+ pm_power_off = ddb_machine_power_off;
ddb_out32(DDB_BAR0, 0);
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/pci.h>
+#include <linux/pm.h>
#include <asm/addrspace.h>
#include <asm/bcache.h>
_machine_restart = ddb_machine_restart;
_machine_halt = ddb_machine_halt;
- _machine_power_off = ddb_machine_power_off;
+ pm_power_off = ddb_machine_power_off;
/* request io port/mem resources */
if (request_resource(&ioport_resource, &ddb5476_ioport.dma1) ||
#include <linux/major.h>
#include <linux/kdev_t.h>
#include <linux/root_dev.h>
+#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
_machine_restart = ddb_machine_restart;
_machine_halt = ddb_machine_halt;
- _machine_power_off = ddb_machine_power_off;
+ pm_power_off = ddb_machine_power_off;
/* setup resource limits */
ioport_resource.end = DDB_PCI0_IO_SIZE + DDB_PCI1_IO_SIZE - 1;
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/types.h>
+#include <linux/pm.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
_machine_restart = dec_machine_restart;
_machine_halt = dec_machine_halt;
- _machine_power_off = dec_machine_power_off;
+ pm_power_off = dec_machine_power_off;
ioport_resource.start = ~0UL;
ioport_resource.end = 0UL;
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/timex.h>
+#include <linux/pm.h>
+
#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/io.h>
{
_machine_restart = galileo_machine_restart;
_machine_halt = galileo_machine_halt;
- _machine_power_off = galileo_machine_power_off;
+ pm_power_off = galileo_machine_power_off;
board_time_init = gt64120_time_init;
set_io_port_base(KSEG1);
* BRIEF MODULE DESCRIPTION
* Momentum Computer Ocelot (CP7000) - board dependent boot routines
*
- * Copyright (C) 1996, 1997, 2001 Ralf Baechle
+ * Copyright (C) 1996, 1997, 2001, 06 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2000 RidgeRun, Inc.
* Copyright (C) 2001 Red Hat, Inc.
* Copyright (C) 2002 Momentum Computer
#include <linux/pci.h>
#include <linux/timex.h>
#include <linux/vmalloc.h>
+#include <linux/pm.h>
+
#include <asm/time.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
- _machine_power_off = momenco_ocelot_power_off;
+ pm_power_off = momenco_ocelot_power_off;
/*
* initrd_start = (ulong)ocelot_initrd_start;
#include <linux/major.h>
#include <linux/kdev_t.h>
#include <linux/root_dev.h>
+#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/time.h>
_machine_restart = it8172_restart;
_machine_halt = it8172_halt;
- _machine_power_off = it8172_power_off;
+ pm_power_off = it8172_power_off;
/*
* IO/MEM resources.
#include <linux/console.h>
#include <linux/fb.h>
#include <linux/ide.h>
+#include <linux/pm.h>
+
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/jazz.h>
_machine_restart = jazz_machine_restart;
_machine_halt = jazz_machine_halt;
- _machine_power_off = jazz_machine_power_off;
+ pm_power_off = jazz_machine_power_off;
#warning "Somebody should check if screen_info is ok for Jazz."
#include <linux/ioport.h>
#include <linux/param.h> /* for HZ */
#include <linux/delay.h>
+#include <linux/pm.h>
#ifdef CONFIG_SERIAL_TXX9
#include <linux/tty.h>
#include <linux/serial.h>
_machine_restart = jmr3927_machine_restart;
_machine_halt = jmr3927_machine_halt;
- _machine_power_off = jmr3927_machine_power_off;
+ pm_power_off = jmr3927_machine_power_off;
/*
* IO/MEM resources.
* Processor capabilities determination functions.
*
* Copyright (C) xxxx the Anonymous
+ * Copyright (C) 1994 - 2006 Ralf Baechle
* Copyright (C) 2003, 2004 Maciej W. Rozycki
- * Copyright (C) 1994 - 2003 Ralf Baechle
* Copyright (C) 2001, 2004 MIPS Inc.
*
* This program is free software; you can redistribute it and/or
switch (c->processor_id & 0xff00) {
case PRID_IMP_SB1:
c->cputype = CPU_SB1;
-#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
/* FPU in pass1 is known to have issues. */
- c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
-#endif
+ if ((c->processor_id & 0xff) < 0x20)
+ c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
break;
case PRID_IMP_SB1A:
c->cputype = CPU_SB1A;
NESTED(nmi_handler, PT_SIZE, sp)
.set push
.set noat
- .set mips3
SAVE_ALL
move a0, sp
jal nmi_exception_handler
RESTORE_ALL
+ .set mips3
eret
.set pop
END(nmi_handler)
ret = -EIO;
if (copied != sizeof(tmp))
break;
- ret = put_user(tmp, (unsigned int *) (unsigned long) data);
+ ret = put_user(tmp, (unsigned int __user *) (unsigned long) data);
break;
}
case FPC_EIR: { /* implementation / version register */
unsigned int flags;
- if (!cpu_has_fpu)
+ if (!cpu_has_fpu) {
+ tmp = 0;
break;
+ }
preempt_disable();
if (cpu_has_mipsmt) {
preempt_enable();
break;
}
- case DSP_BASE ... DSP_BASE + 5:
+ case DSP_BASE ... DSP_BASE + 5: {
+ dspreg_t *dregs;
+
if (!cpu_has_dsp) {
tmp = 0;
ret = -EIO;
goto out_tsk;
}
- dspreg_t *dregs = __get_dsp_regs(child);
+ dregs = __get_dsp_regs(child);
tmp = (unsigned long) (dregs[addr - DSP_BASE]);
break;
+ }
case DSP_CONTROL:
if (!cpu_has_dsp) {
tmp = 0;
ret = -EIO;
goto out_tsk;
}
- ret = put_user(tmp, (unsigned *) (unsigned long) data);
+ ret = put_user(tmp, (unsigned __user *) (unsigned long) data);
break;
}
else
child->thread.fpu.soft.fcr31 = data;
break;
- case DSP_BASE ... DSP_BASE + 5:
+ case DSP_BASE ... DSP_BASE + 5: {
+ dspreg_t *dregs;
+
if (!cpu_has_dsp) {
ret = -EIO;
break;
}
- dspreg_t *dregs = __get_dsp_regs(child);
+ dregs = __get_dsp_regs(child);
dregs[addr - DSP_BASE] = data;
break;
+ }
case DSP_CONTROL:
if (!cpu_has_dsp) {
ret = -EIO;
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2001 by Ralf Baechle
+ * Copyright (C) 2001, 06 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2001 MIPS Technologies, Inc.
*/
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/pm.h>
#include <linux/types.h>
#include <linux/reboot.h>
-#include <asm/reboot.h>
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
+#include <asm/reboot.h>
/*
* Urgs ... Too many MIPS machines to handle this in a generic way.
*/
void (*_machine_restart)(char *command);
void (*_machine_halt)(void);
-void (*_machine_power_off)(void);
+void (*pm_power_off)(void);
void machine_restart(char *command)
{
- _machine_restart(command);
+ if (_machine_restart)
+ _machine_restart(command);
}
void machine_halt(void)
{
- _machine_halt();
+ if (_machine_halt)
+ _machine_halt();
}
void machine_power_off(void)
{
if (pm_power_off)
pm_power_off();
-
- _machine_power_off();
}
-
/*
* Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2005, 06 Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/poll.h>
#include <linux/sched.h>
#include <linux/wait.h>
+
#include <asm/mipsmtregs.h>
#include <asm/bitops.h>
#include <asm/cpu.h>
#include <linux/config.h>
static inline int
-setup_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
+setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
{
int err = 0;
}
static inline int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
{
unsigned int used_math;
unsigned long treg;
/*
* Determine which stack to use..
*/
-static inline void *
+static inline void __user *
get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
{
unsigned long sp;
if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags (sp) == 0))
sp = current->sas_ss_sp + current->sas_ss_size;
- return (void *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? 32 : ALMASK));
+ return (void __user *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? 32 : ALMASK));
}
static inline int install_sigtramp(unsigned int __user *tramp,
__attribute_used__ noinline static void
_sys_sigreturn(nabi_no_regargs struct pt_regs regs)
{
- struct sigframe *frame;
+ struct sigframe __user *frame;
sigset_t blocked;
- frame = (struct sigframe *) regs.regs[29];
+ frame = (struct sigframe __user *) regs.regs[29];
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&blocked, &frame->sf_mask, sizeof(blocked)))
__attribute_used__ noinline static void
_sys_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
{
- struct rt_sigframe *frame;
+ struct rt_sigframe __user *frame;
sigset_t set;
stack_t st;
- frame = (struct rt_sigframe *) regs.regs[29];
+ frame = (struct rt_sigframe __user *) regs.regs[29];
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set)))
goto badframe;
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
- do_sigaltstack(&st, NULL, regs.regs[29]);
+ do_sigaltstack((stack_t __user *)&st, NULL, regs.regs[29]);
/*
* Don't let your children do this ...
int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
int signr, sigset_t *set)
{
- struct sigframe *frame;
+ struct sigframe __user *frame;
int err = 0;
frame = get_sigframe(ka, regs, sizeof(*frame));
int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
int signr, sigset_t *set, siginfo_t *info)
{
- struct rt_sigframe *frame;
+ struct rt_sigframe __user *frame;
int err = 0;
frame = get_sigframe(ka, regs, sizeof(*frame));
/* Create the ucontext. */
err |= __put_user(0, &frame->rs_uc.uc_flags);
- err |= __put_user(0, &frame->rs_uc.uc_link);
+ err |= __put_user(NULL, &frame->rs_uc.uc_link);
err |= __put_user((void *)current->sas_ss_sp,
&frame->rs_uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->regs[29]),
extern void __put_sigset_unknown_nsig(void);
extern void __get_sigset_unknown_nsig(void);
-static inline int put_sigset(const sigset_t *kbuf, compat_sigset_t *ubuf)
+static inline int put_sigset(const sigset_t *kbuf, compat_sigset_t __user *ubuf)
{
int err = 0;
if (!access_ok(VERIFY_READ, act, sizeof(*act)))
return -EFAULT;
err |= __get_user(handler, &act->sa_handler);
- new_ka.sa.sa_handler = (void*)(s64)handler;
+ new_ka.sa.sa_handler = (void __user *)(s64)handler;
err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
err |= __get_user(mask, &act->sa_mask.sig[0]);
if (err)
asmlinkage int sys32_sigaltstack(nabi_no_regargs struct pt_regs regs)
{
- const stack32_t *uss = (const stack32_t *) regs.regs[4];
- stack32_t *uoss = (stack32_t *) regs.regs[5];
+ const stack32_t __user *uss = (const stack32_t __user *) regs.regs[4];
+ stack32_t __user *uoss = (stack32_t __user *) regs.regs[5];
unsigned long usp = regs.regs[29];
stack_t kss, koss;
int ret, err = 0;
}
set_fs (KERNEL_DS);
- ret = do_sigaltstack(uss ? &kss : NULL , uoss ? &koss : NULL, usp);
+ ret = do_sigaltstack(uss ? (stack_t __user *)&kss : NULL,
+ uoss ? (stack_t __user *)&koss : NULL, usp);
set_fs (old_fs);
if (!ret && uoss) {
return ret;
}
-static int restore_sigcontext32(struct pt_regs *regs, struct sigcontext32 *sc)
+static int restore_sigcontext32(struct pt_regs *regs, struct sigcontext32 __user *sc)
{
u32 used_math;
int err = 0;
#endif
};
-int copy_siginfo_to_user32(compat_siginfo_t *to, siginfo_t *from)
+int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
{
int err;
err |= __put_user(from->si_uid, &to->si_uid);
break;
case __SI_FAULT >> 16:
- err |= __put_user((long)from->si_addr, &to->si_addr);
+ err |= __put_user((unsigned long)from->si_addr, &to->si_addr);
break;
case __SI_POLL >> 16:
err |= __put_user(from->si_band, &to->si_band);
__attribute_used__ noinline static void
_sys32_sigreturn(nabi_no_regargs struct pt_regs regs)
{
- struct sigframe *frame;
+ struct sigframe __user *frame;
sigset_t blocked;
- frame = (struct sigframe *) regs.regs[29];
+ frame = (struct sigframe __user *) regs.regs[29];
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&blocked, &frame->sf_mask, sizeof(blocked)))
__attribute_used__ noinline static void
_sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
{
- struct rt_sigframe32 *frame;
+ struct rt_sigframe32 __user *frame;
mm_segment_t old_fs;
sigset_t set;
stack_t st;
s32 sp;
- frame = (struct rt_sigframe32 *) regs.regs[29];
+ frame = (struct rt_sigframe32 __user *) regs.regs[29];
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set)))
call it and ignore errors. */
old_fs = get_fs();
set_fs (KERNEL_DS);
- do_sigaltstack(&st, NULL, regs.regs[29]);
+ do_sigaltstack((stack_t __user *)&st, NULL, regs.regs[29]);
set_fs (old_fs);
/*
}
static inline int setup_sigcontext32(struct pt_regs *regs,
- struct sigcontext32 *sc)
+ struct sigcontext32 __user *sc)
{
int err = 0;
/*
* Determine which stack to use..
*/
-static inline void *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
- size_t frame_size)
+static inline void __user *get_sigframe(struct k_sigaction *ka,
+ struct pt_regs *regs,
+ size_t frame_size)
{
unsigned long sp;
if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags (sp) == 0))
sp = current->sas_ss_sp + current->sas_ss_size;
- return (void *)((sp - frame_size) & ALMASK);
+ return (void __user *)((sp - frame_size) & ALMASK);
}
int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
int signr, sigset_t *set)
{
- struct sigframe *frame;
+ struct sigframe __user *frame;
int err = 0;
frame = get_sigframe(ka, regs, sizeof(*frame));
int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
int signr, sigset_t *set, siginfo_t *info)
{
- struct rt_sigframe32 *frame;
+ struct rt_sigframe32 __user *frame;
int err = 0;
s32 sp;
}
asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 *act,
- struct sigaction32 *oact,
+ struct sigaction32 __user *oact,
unsigned int sigsetsize)
{
struct k_sigaction new_sa, old_sa;
if (!access_ok(VERIFY_READ, act, sizeof(*act)))
return -EFAULT;
err |= __get_user(handler, &act->sa_handler);
- new_sa.sa.sa_handler = (void*)(s64)handler;
+ new_sa.sa.sa_handler = (void __user *)(s64)handler;
err |= __get_user(new_sa.sa.sa_flags, &act->sa_flags);
err |= get_sigset(&new_sa.sa.sa_mask, &act->sa_mask);
if (err)
}
asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t *set,
- compat_sigset_t *oset, unsigned int sigsetsize)
+ compat_sigset_t __user *oset, unsigned int sigsetsize)
{
sigset_t old_set, new_set;
int ret;
return -EFAULT;
set_fs (KERNEL_DS);
- ret = sys_rt_sigprocmask(how, set ? &new_set : NULL,
- oset ? &old_set : NULL, sigsetsize);
+ ret = sys_rt_sigprocmask(how, set ? (sigset_t __user *)&new_set : NULL,
+ oset ? (sigset_t __user *)&old_set : NULL,
+ sigsetsize);
set_fs (old_fs);
if (!ret && oset && put_sigset(&old_set, oset))
return ret;
}
-asmlinkage int sys32_rt_sigpending(compat_sigset_t *uset,
+asmlinkage int sys32_rt_sigpending(compat_sigset_t __user *uset,
unsigned int sigsetsize)
{
int ret;
mm_segment_t old_fs = get_fs();
set_fs (KERNEL_DS);
- ret = sys_rt_sigpending(&set, sigsetsize);
+ ret = sys_rt_sigpending((sigset_t __user *)&set, sigsetsize);
set_fs (old_fs);
if (!ret && put_sigset(&set, uset))
return ret;
}
-asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t *uinfo)
+asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo)
{
siginfo_t info;
int ret;
copy_from_user (info._sifields._pad, uinfo->_sifields._pad, SI_PAD_SIZE))
return -EFAULT;
set_fs (KERNEL_DS);
- ret = sys_rt_sigqueueinfo(pid, sig, &info);
+ ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __user *)&info);
set_fs (old_fs);
return ret;
}
#define __NR_N32_rt_sigreturn 6211
#define __NR_N32_restart_syscall 6214
+#define DEBUG_SIG 0
+
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
/* IRIX compatible stack_t */
__attribute_used__ noinline static void
_sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
{
- struct rt_sigframe_n32 *frame;
+ struct rt_sigframe_n32 __user *frame;
sigset_t set;
stack_t st;
s32 sp;
- frame = (struct rt_sigframe_n32 *) regs.regs[29];
+ frame = (struct rt_sigframe_n32 __user *) regs.regs[29];
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set)))
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
- do_sigaltstack(&st, NULL, regs.regs[29]);
+ do_sigaltstack((stack_t __user *)&st, NULL, regs.regs[29]);
/*
* Don't let your children do this ...
int setup_rt_frame_n32(struct k_sigaction * ka,
struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info)
{
- struct rt_sigframe_n32 *frame;
+ struct rt_sigframe_n32 __user *frame;
int err = 0;
s32 sp;
#endif
if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
status_set |= ST0_XX;
- change_c0_status(ST0_CU|ST0_MX|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
+ change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
status_set);
if (cpu_has_dsp)
#include <linux/config.h>
+#include <asm/asm-offsets.h>
#include <asm-generic/vmlinux.lds.h>
#undef mips /* CPP really sucks for this job */
we can shorten the on-disk segment size. */
.sdata : { *(.sdata) }
- . = ALIGN(4096);
+ . = ALIGN(_PAGE_SIZE);
__nosave_begin = .;
.data_nosave : { *(.data.nosave) }
- . = ALIGN(4096);
+ . = ALIGN(_PAGE_SIZE);
__nosave_end = .;
. = ALIGN(32);
_edata = .; /* End of data section */
/* will be freed after init */
- . = ALIGN(4096); /* Init code and data */
+ . = ALIGN(_PAGE_SIZE); /* Init code and data */
__init_begin = .;
.init.text : {
_sinittext = .;
.con_initcall.init : { *(.con_initcall.init) }
__con_initcall_end = .;
SECURITY_INIT
- . = ALIGN(4096);
+ . = ALIGN(_PAGE_SIZE);
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
__initramfs_end = .;
__per_cpu_start = .;
.data.percpu : { *(.data.percpu) }
__per_cpu_end = .;
- . = ALIGN(4096);
+ . = ALIGN(_PAGE_SIZE);
__init_end = .;
/* freed after init ends here */
*/
#include <linux/config.h>
#include <linux/kernel.h>
+#include <linux/pm.h>
+
#include <asm/reboot.h>
#include <asm/system.h>
#include <asm/lasat/lasat.h>
+
#include "picvue.h"
#include "prom.h"
{
_machine_restart = lasat_machine_restart;
_machine_halt = lasat_machine_halt;
- _machine_power_off = lasat_machine_halt;
+ pm_power_off = lasat_machine_halt;
}
printk("task->mm == %8p\n", t->mm);
//printk("tasks->mm.pgd == %08x\n", (unsigned int) t->mm->pgd);
- if (addr > KSEG0)
+ if (addr > KSEG0) {
page_dir = pgd_offset_k(0);
- else if (t->mm) {
- page_dir = pgd_offset(t->mm, 0);
- printk("page_dir == %08x\n", (unsigned int) page_dir);
- } else
- printk("Current thread has no mm\n");
-
- if (addr > KSEG0)
pgd = pgd_offset_k(addr);
- else if (t->mm) {
+ } else if (t->mm) {
+ page_dir = pgd_offset(t->mm, 0);
pgd = pgd_offset(t->mm, addr);
- printk("pgd == %08x, ", (unsigned int) pgd);
- pud = pud_offset(pgd, addr);
- printk("pud == %08x, ", (unsigned int) pud);
+ } else {
+ printk("Current thread has no mm\n");
+ return;
+ }
+ printk("page_dir == %08x\n", (unsigned int) page_dir);
+ printk("pgd == %08x, ", (unsigned int) pgd);
+ pud = pud_offset(pgd, addr);
+ printk("pud == %08x, ", (unsigned int) pud);
- pmd = pmd_offset(pud, addr);
- printk("pmd == %08x, ", (unsigned int) pmd);
+ pmd = pmd_offset(pud, addr);
+ printk("pmd == %08x, ", (unsigned int) pmd);
- pte = pte_offset(pmd, addr);
- printk("pte == %08x, ", (unsigned int) pte);
- } else
- printk("Current thread has no mm\n");
+ pte = pte_offset(pmd, addr);
+ printk("pte == %08x, ", (unsigned int) pte);
page = *pte;
#ifdef CONFIG_64BIT_PHYS_ADDR
CLEARCX;
FLUSHXDP;
+ /*
+ * Invert the sign ALWAYS to prevent an endless recursion on
+ * pow() in libc.
+ */
+ /* quick fix up */
+ DPSIGN(x) ^= 1;
+
if (xc == IEEE754_CLASS_SNAN) {
+ ieee754dp y = ieee754dp_indef();
SETCX(IEEE754_INVALID_OPERATION);
- return ieee754dp_nanxcpt(ieee754dp_indef(), "neg");
+ DPSIGN(y) = DPSIGN(x);
+ return ieee754dp_nanxcpt(y, "neg");
}
if (ieee754dp_isnan(x)) /* but not infinity */
return ieee754dp_nanxcpt(x, "neg", x);
-
- /* quick fix up */
- DPSIGN(x) ^= 1;
return x;
}
CLEARCX;
FLUSHXSP;
+ /*
+ * Invert the sign ALWAYS to prevent an endless recursion on
+ * pow() in libc.
+ */
+ /* quick fix up */
+ SPSIGN(x) ^= 1;
+
if (xc == IEEE754_CLASS_SNAN) {
+ ieee754sp y = ieee754sp_indef();
SETCX(IEEE754_INVALID_OPERATION);
- return ieee754sp_nanxcpt(ieee754sp_indef(), "neg");
+ SPSIGN(y) = SPSIGN(x);
+ return ieee754sp_nanxcpt(y, "neg");
}
if (ieee754sp_isnan(x)) /* but not infinity */
return ieee754sp_nanxcpt(x, "neg", x);
-
- /* quick fix up */
- SPSIGN(x) ^= 1;
return x;
}
*
*/
#include <linux/config.h>
+#include <linux/pm.h>
#include <asm/io.h>
#include <asm/reboot.h>
_machine_restart = mips_machine_restart;
_machine_halt = mips_machine_halt;
#if defined(CONFIG_MIPS_ATLAS)
- _machine_power_off = atlas_machine_power_off;
+ pm_power_off = atlas_machine_power_off;
#endif
#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD)
- _machine_power_off = mips_machine_halt;
+ pm_power_off = mips_machine_halt;
#endif
}
}
struct flush_icache_range_args {
- unsigned long __user start;
- unsigned long __user end;
+ unsigned long start;
+ unsigned long end;
};
static inline void local_r4k_flush_icache_range(void *args)
}
}
-static void r4k_flush_icache_range(unsigned long __user start,
- unsigned long __user end)
+static void r4k_flush_icache_range(unsigned long start, unsigned long end)
{
struct flush_icache_range_args args;
unsigned long end);
void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
unsigned long pfn);
-void (*flush_icache_range)(unsigned long __user start,
- unsigned long __user end);
+void (*flush_icache_range)(unsigned long start, unsigned long end);
void (*flush_icache_page)(struct vm_area_struct *vma, struct page *page);
/* MIPS specific cache operations */
* We could optimize the case where the cache argument is not BCACHE but
* that seems very atypical use ...
*/
-asmlinkage int sys_cacheflush(unsigned long __user addr,
+asmlinkage int sys_cacheflush(unsigned long addr,
unsigned long bytes, unsigned int cache)
{
if (bytes == 0)
#include <linux/bootmem.h>
#include <linux/highmem.h>
#include <linux/swap.h>
+#include <linux/proc_fs.h>
#include <asm/bootinfo.h>
#include <asm/cachectl.h>
return 0;
}
+static struct kcore_list kcore_mem, kcore_vmalloc;
+#ifdef CONFIG_64BIT
+static struct kcore_list kcore_kseg0;
+#endif
+
void __init mem_init(void)
{
unsigned long codesize, reservedpages, datasize, initsize;
datasize = (unsigned long) &_edata - (unsigned long) &_etext;
initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
+#ifdef CONFIG_64BIT
+ if ((unsigned long) &_text > (unsigned long) CKSEG0)
+ /* The -4 is a hack so that user tools don't have to handle
+ the overflow. */
+ kclist_add(&kcore_kseg0, (void *) CKSEG0, 0x80000000 - 4);
+#endif
+ kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT);
+ kclist_add(&kcore_vmalloc, (void *)VMALLOC_START,
+ VMALLOC_END-VMALLOC_START);
+
printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, "
"%ldk reserved, %ldk data, %ldk init, %ldk highmem)\n",
(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
#include <linux/pci.h>
#include <linux/swap.h>
#include <linux/ioport.h>
+#include <linux/pm.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
_machine_restart = momenco_jaguar_restart;
_machine_halt = momenco_jaguar_halt;
- _machine_power_off = momenco_jaguar_power_off;
+ pm_power_off = momenco_jaguar_power_off;
/*
* initrd_start = (ulong)jaguar_initrd_start;
#include <linux/timex.h>
#include <linux/bootmem.h>
#include <linux/mv643xx.h>
+#include <linux/pm.h>
+
#include <asm/time.h>
#include <asm/page.h>
#include <asm/bootinfo.h>
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
- _machine_power_off = momenco_ocelot_power_off;
+ pm_power_off = momenco_ocelot_power_off;
/* Wired TLB entries */
setup_wired_tlb_entries();
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
+#include <linux/pm.h>
#include <linux/timex.h>
#include <linux/vmalloc.h>
+
#include <asm/time.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
- _machine_power_off = momenco_ocelot_power_off;
+ pm_power_off = momenco_ocelot_power_off;
/*
* initrd_start = (ulong)ocelot_initrd_start;
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
+#include <linux/pm.h>
#include <linux/timex.h>
#include <linux/vmalloc.h>
+
#include <asm/time.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
- _machine_power_off = momenco_ocelot_power_off;
+ pm_power_off = momenco_ocelot_power_off;
/*
* initrd_start = (ulong)ocelot_initrd_start;
oprofile-$(CONFIG_CPU_MIPS32) += op_model_mipsxx.o
oprofile-$(CONFIG_CPU_MIPS64) += op_model_mipsxx.o
+oprofile-$(CONFIG_CPU_SB1) += op_model_mipsxx.o
oprofile-$(CONFIG_CPU_RM9000) += op_model_rm9000.o
case CPU_20KC:
case CPU_24K:
case CPU_25KF:
+ case CPU_34K:
+ case CPU_SB1:
+ case CPU_SB1A:
lmodel = &op_model_mipsxx;
break;
op_model_mipsxx.cpu_type = "mips/25K";
break;
+#ifndef CONFIG_SMP
+ case CPU_34K:
+ op_model_mipsxx.cpu_type = "mips/34K";
+ break;
+#endif
+
case CPU_5KC:
op_model_mipsxx.cpu_type = "mips/5K";
break;
+ case CPU_SB1:
+ case CPU_SB1A:
+ op_model_mipsxx.cpu_type = "mips/sb1";
+ break;
+
default:
printk(KERN_ERR "Profiling unsupported for this CPU\n");
obj-$(CONFIG_SGI_IP27) += pci-ip27.o
obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o
obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
+obj-$(CONFIG_SIBYTE_BCM112X) += fixup-sb1250.o pci-sb1250.o
obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
obj-$(CONFIG_SNI_RM200_PCI) += fixup-sni.o ops-sni.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
#include <asm/io.h>
#include <asm/gt64120.h>
-#include <asm/cobalt/cobalt.h>
+#include <asm/mach-cobalt/cobalt.h>
extern int cobalt_board_id;
pci_read_config_byte(dev, PCI_LATENCY_TIMER, <);
if (lt < 64)
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 7);
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
* host bridge.
*/
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 7);
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
/*
* The code described by the comment below has been removed
#include <asm/io.h>
#include <asm/gt64120.h>
-#include <asm/cobalt/cobalt.h>
+#include <asm/mach-cobalt/cobalt.h>
/*
* Device 31 on the GT64111 is used to generate PCI special
/* turn on ExpMemEn */
cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
- printk("PCIFeatureCtrl = %x\n", cmdreg);
WRITECFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40),
cmdreg | 0x10);
cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
- printk("PCIFeatureCtrl = %x\n", cmdreg);
/*
* Establish mappings in KSEG2 (kernel virtual) to PCI I/O
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/serial_ip3106.h>
+#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
_machine_restart = pnx8550_machine_restart;
_machine_halt = pnx8550_machine_halt;
- _machine_power_off = pnx8550_machine_power_off;
+ pm_power_off = pnx8550_machine_power_off;
board_time_init = pnx8550_time_init;
board_timer_setup = pnx8550_timer_setup;
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/delay.h>
+#include <linux/pm.h>
#include <linux/smp.h>
#include <asm/io.h>
/* Callbacks for halt, restart */
_machine_restart = (void (*)(char *)) prom_exit;
_machine_halt = prom_halt;
- _machine_power_off = prom_halt;
+ pm_power_off = prom_halt;
debug_vectors = cv;
arcs_cmdline[0] = '\0';
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1997, 1998, 2001, 2003 by Ralf Baechle
+ * Copyright (C) 1997, 1998, 2001, 03, 05, 06 by Ralf Baechle
*/
+#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/ds1286.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/notifier.h>
+#include <linux/pm.h>
#include <linux/timer.h>
#include <asm/io.h>
#define MACHINE_PANICED 1
#define MACHINE_SHUTTING_DOWN 2
-static int machine_state = 0;
-static void sgi_machine_restart(char *command) __attribute__((noreturn));
-static void sgi_machine_halt(void) __attribute__((noreturn));
-static void sgi_machine_power_off(void) __attribute__((noreturn));
+static int machine_state;
-static void sgi_machine_restart(char *command)
-{
- if (machine_state & MACHINE_SHUTTING_DOWN)
- sgi_machine_power_off();
- sgimc->cpuctrl0 |= SGIMC_CCTRL0_SYSINIT;
- while (1);
-}
-
-static void sgi_machine_halt(void)
-{
- if (machine_state & MACHINE_SHUTTING_DOWN)
- sgi_machine_power_off();
- ArcEnterInteractiveMode();
-}
-
-static void sgi_machine_power_off(void)
+static void ATTRIB_NORET sgi_machine_power_off(void)
{
unsigned int tmp;
}
}
+static void ATTRIB_NORET sgi_machine_restart(char *command)
+{
+ if (machine_state & MACHINE_SHUTTING_DOWN)
+ sgi_machine_power_off();
+ sgimc->cpuctrl0 |= SGIMC_CCTRL0_SYSINIT;
+ while (1);
+}
+
+static void ATTRIB_NORET sgi_machine_halt(void)
+{
+ if (machine_state & MACHINE_SHUTTING_DOWN)
+ sgi_machine_power_off();
+ ArcEnterInteractiveMode();
+}
+
static void power_timeout(unsigned long data)
{
sgi_machine_power_off();
sgi_ioc_reset ^= (SGIOC_RESET_LC0OFF|SGIOC_RESET_LC1OFF);
sgioc->reset = sgi_ioc_reset;
- mod_timer(&blink_timer, jiffies+data);
+ mod_timer(&blink_timer, jiffies + data);
}
static void debounce(unsigned long data)
del_timer(&debounce_timer);
if (sgint->istat1 & SGINT_ISTAT1_PWR) {
/* Interrupt still being sent. */
- debounce_timer.expires = jiffies + 5; /* 0.05s */
+ debounce_timer.expires = jiffies + (HZ / 20); /* 0.05s */
add_timer(&debounce_timer);
sgioc->panel = SGIOC_PANEL_POWERON | SGIOC_PANEL_POWERINTR |
indy_volume_button(1);
if (sgint->istat1 & SGINT_ISTAT1_PWR) {
- volume_timer.expires = jiffies + 1;
+ volume_timer.expires = jiffies + (HZ / 100);
add_timer(&volume_timer);
}
}
indy_volume_button(-1);
if (sgint->istat1 & SGINT_ISTAT1_PWR) {
- volume_timer.expires = jiffies + 1;
+ volume_timer.expires = jiffies + (HZ / 100);
add_timer(&volume_timer);
}
}
if (!(buttons & SGIOC_PANEL_VOLUPINTR)) {
init_timer(&volume_timer);
volume_timer.function = volume_up_button;
- volume_timer.expires = jiffies + 1;
+ volume_timer.expires = jiffies + (HZ / 100);
add_timer(&volume_timer);
}
/* Volume down button was pressed */
if (!(buttons & SGIOC_PANEL_VOLDNINTR)) {
init_timer(&volume_timer);
volume_timer.function = volume_down_button;
- volume_timer.expires = jiffies + 1;
+ volume_timer.expires = jiffies + (HZ / 100);
add_timer(&volume_timer);
}
{
_machine_restart = sgi_machine_restart;
_machine_halt = sgi_machine_halt;
- _machine_power_off = sgi_machine_power_off;
+ pm_power_off = sgi_machine_power_off;
request_irq(SGI_PANEL_IRQ, panel_int, 0, "Front Panel", NULL);
init_timer(&blink_timer);
void __init plat_setup(void)
{
char *ctype;
+ char *cserial;
board_be_init = ip22_be_init;
ip22_time_init();
/* ARCS console environment variable is set to "g?" for
* graphics console, it is set to "d" for the first serial
* line and "d2" for the second serial line.
+ *
+ * Need to check if the case is 'g' but no keyboard:
+ * (ConsoleIn/Out = serial)
*/
ctype = ArcGetEnvironmentVariable("console");
- if (ctype && *ctype == 'd') {
+ cserial = ArcGetEnvironmentVariable("ConsoleOut");
+
+ if ((ctype && *ctype == 'd') || (cserial && *cserial == 's')) {
static char options[8];
char *baud = ArcGetEnvironmentVariable("dbaud");
if (baud)
add_preferred_console("ttyS", *(ctype + 1) == '2' ? 1 : 0,
baud ? options : NULL);
} else if (!ctype || *ctype != 'g') {
- /* Use ARC if we don't want serial ('d') or Newport ('g'). */
+ /* Use ARC if we don't want serial ('d') or graphics ('g'). */
prom_flags |= PROM_FLAG_USE_AS_CONSOLE;
add_preferred_console("arc", 0, NULL);
}
*
* Reset an IP27.
*
- * Copyright (C) 1997, 1998, 1999, 2000 by Ralf Baechle
+ * Copyright (C) 1997, 1998, 1999, 2000, 06 by Ralf Baechle
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
#include <linux/config.h>
#include <linux/smp.h>
#include <linux/mmzone.h>
#include <linux/nodemask.h>
+#include <linux/pm.h>
#include <asm/io.h>
#include <asm/irq.h>
{
_machine_restart = ip27_machine_restart;
_machine_halt = ip27_machine_halt;
- _machine_power_off = ip27_machine_power_off;
+ pm_power_off = ip27_machine_power_off;
}
#include <linux/delay.h>
#include <linux/ds17287rtc.h>
#include <linux/interrupt.h>
+#include <linux/pm.h>
#include <asm/addrspace.h>
#include <asm/irq.h>
_machine_restart = ip32_machine_restart;
_machine_halt = ip32_machine_halt;
- _machine_power_off = ip32_machine_power_off;
+ pm_power_off = ip32_machine_power_off;
init_timer(&blink_timer);
blink_timer.function = blink_timeout;
#include <linux/mm.h>
#include <linux/blkdev.h>
#include <linux/bootmem.h>
+#include <linux/pm.h>
#include <linux/smp.h>
#include <asm/bootinfo.h>
_machine_restart = cfe_linux_restart;
_machine_halt = cfe_linux_halt;
- _machine_power_off = cfe_linux_halt;
+ pm_power_off = cfe_linux_halt;
/*
* Check if a loader was used; if NOT, the 4 arguments are
#include <linux/bootmem.h>
#include <linux/smp.h>
#include <linux/initrd.h>
+#include <linux/pm.h>
#include <asm/bootinfo.h>
#include <asm/reboot.h>
{
_machine_restart = (void (*)(char *))prom_linux_exit;
_machine_halt = prom_linux_exit;
- _machine_power_off = prom_linux_exit;
+ pm_power_off = prom_linux_exit;
strcpy(arcs_cmdline, "root=/dev/ram0 ");
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/config.h>
+#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/string.h>
/* Setup code likely to be common to all SiByte platforms */
-static inline int sys_rev_decode(void)
+static int __init sys_rev_decode(void)
{
int ret = 0;
return ret;
}
-static inline int setup_bcm1250(void)
+static int __init setup_bcm1250(void)
{
int ret = 0;
return ret;
}
-static inline int setup_bcm112x(void)
+static int __init setup_bcm112x(void)
{
int ret = 0;
return ret;
}
-void sb1250_setup(void)
+void __init sb1250_setup(void)
{
uint64_t sys_rev;
int plldiv;
soc_str, pass_str, zbbus_mhz * 2, sb1_pass);
prom_printf("Board type: %s\n", get_system_type());
- switch(war_pass) {
+ switch (war_pass) {
case K_SYS_REVISION_BCM1250_PASS1:
#ifndef CONFIG_SB1_PASS_1_WORKAROUNDS
- prom_printf("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, and the kernel doesn't have the proper workarounds compiled in. @@@@\n");
+ prom_printf("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, "
+ "and the kernel doesn't have the proper "
+ "workarounds compiled in. @@@@\n");
bad_config = 1;
#endif
break;
case K_SYS_REVISION_BCM1250_PASS2:
/* Pass 2 - easiest as default for now - so many numbers */
-#if !defined(CONFIG_SB1_PASS_2_WORKAROUNDS) || !defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS)
- prom_printf("@@@@ This is a BCM1250 A3-A10 board, and the kernel doesn't have the proper workarounds compiled in. @@@@\n");
+#if !defined(CONFIG_SB1_PASS_2_WORKAROUNDS) || \
+ !defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS)
+ prom_printf("@@@@ This is a BCM1250 A3-A10 board, and the "
+ "kernel doesn't have the proper workarounds "
+ "compiled in. @@@@\n");
bad_config = 1;
#endif
#ifdef CONFIG_CPU_HAS_PREFETCH
- prom_printf("@@@@ Prefetches may be enabled in this kernel, but are buggy on this board. @@@@\n");
+ prom_printf("@@@@ Prefetches may be enabled in this kernel, "
+ "but are buggy on this board. @@@@\n");
bad_config = 1;
#endif
break;
case K_SYS_REVISION_BCM1250_PASS2_2:
#ifndef CONFIG_SB1_PASS_2_WORKAROUNDS
- prom_printf("@@@@ This is a BCM1250 B1/B2. board, and the kernel doesn't have the proper workarounds compiled in. @@@@\n");
+ prom_printf("@@@@ This is a BCM1250 B1/B2. board, and the "
+ "kernel doesn't have the proper workarounds "
+ "compiled in. @@@@\n");
bad_config = 1;
#endif
-#if defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) || !defined(CONFIG_CPU_HAS_PREFETCH)
- prom_printf("@@@@ This is a BCM1250 B1/B2, but the kernel is conservatively configured for an 'A' stepping. @@@@\n");
+#if defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) || \
+ !defined(CONFIG_CPU_HAS_PREFETCH)
+ prom_printf("@@@@ This is a BCM1250 B1/B2, but the kernel is "
+ "conservatively configured for an 'A' stepping. "
+ "@@@@\n");
#endif
break;
default:
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1996, 97, 98, 2000, 03, 04 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org)
*/
#include <linux/config.h>
#include <linux/eisa.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/mc146818rtc.h>
+#include <linux/pm.h>
#include <linux/pci.h>
#include <linux/console.h>
#include <linux/fb.h>
_machine_restart = sni_machine_restart;
_machine_halt = sni_machine_halt;
- _machine_power_off = sni_machine_power_off;
+ pm_power_off = sni_machine_power_off;
sni_display_setup();
void __init prom_init(void)
{
- const char* toshiba_name_list[] = GROUP_TOSHIBA_NAMES;
extern int tx4927_get_mem_size(void);
extern char* toshiba_name;
int msize;
mips_machgroup = MACH_GROUP_TOSHIBA;
- if ((read_c0_prid() & 0xff) == PRID_REV_TX4927)
+ if ((read_c0_prid() & 0xff) == PRID_REV_TX4927) {
mips_machtype = MACH_TOSHIBA_RBTX4927;
- else
+ toshiba_name = "TX4927";
+ } else {
mips_machtype = MACH_TOSHIBA_RBTX4937;
-
- toshiba_name = toshiba_name_list[mips_machtype];
+ toshiba_name = "TX4937";
+ }
msize = tx4927_get_mem_size();
add_memory_region(0, msize << 20, BOOT_MEM_RAM);
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/timex.h>
+#include <linux/pm.h>
+
#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/io.h>
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
"0x%08lx=mips_io_port_base",
mips_io_port_base);
-
- TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
- "setup pci_io_resource to 0x%08lx 0x%08lx\n",
- pci_io_resource.start,
- pci_io_resource.end);
- TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
- "setup pci_mem_resource to 0x%08lx 0x%08lx\n",
- pci_mem_resource.start,
- pci_mem_resource.end);
-
if (!called) {
printk
- ("TX4927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
+ ("%s PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
+ toshiba_name,
(unsigned short) (tx4927_pcicptr->pciid >> 16),
(unsigned short) (tx4927_pcicptr->pciid & 0xffff),
(unsigned short) (tx4927_pcicptr->pciccrev & 0xff),
(tx4927_ccfgptr->ccfg & TX4927_CCFG_PCI66) ? " PCI66" : "");
if (tx4927_ccfgptr->pcfg & TX4927_PCFG_PCICLKEN_ALL) {
int pciclk = 0;
- switch ((unsigned long) tx4927_ccfgptr->
- ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
- case TX4927_CCFG_PCIDIVMODE_2_5:
- pciclk = tx4927_cpu_clock * 2 / 5;
- break;
- case TX4927_CCFG_PCIDIVMODE_3:
- pciclk = tx4927_cpu_clock / 3;
- break;
- case TX4927_CCFG_PCIDIVMODE_5:
- pciclk = tx4927_cpu_clock / 5;
- break;
- case TX4927_CCFG_PCIDIVMODE_6:
- pciclk = tx4927_cpu_clock / 6;
- break;
- }
+ if (mips_machtype == MACH_TOSHIBA_RBTX4937)
+ switch ((unsigned long) tx4927_ccfgptr->
+ ccfg & TX4937_CCFG_PCIDIVMODE_MASK) {
+ case TX4937_CCFG_PCIDIVMODE_4:
+ pciclk = tx4927_cpu_clock / 4;
+ break;
+ case TX4937_CCFG_PCIDIVMODE_4_5:
+ pciclk = tx4927_cpu_clock * 2 / 9;
+ break;
+ case TX4937_CCFG_PCIDIVMODE_5:
+ pciclk = tx4927_cpu_clock / 5;
+ break;
+ case TX4937_CCFG_PCIDIVMODE_5_5:
+ pciclk = tx4927_cpu_clock * 2 / 11;
+ break;
+ case TX4937_CCFG_PCIDIVMODE_8:
+ pciclk = tx4927_cpu_clock / 8;
+ break;
+ case TX4937_CCFG_PCIDIVMODE_9:
+ pciclk = tx4927_cpu_clock / 9;
+ break;
+ case TX4937_CCFG_PCIDIVMODE_10:
+ pciclk = tx4927_cpu_clock / 10;
+ break;
+ case TX4937_CCFG_PCIDIVMODE_11:
+ pciclk = tx4927_cpu_clock / 11;
+ break;
+ }
+
+ else
+ switch ((unsigned long) tx4927_ccfgptr->
+ ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
+ case TX4927_CCFG_PCIDIVMODE_2_5:
+ pciclk = tx4927_cpu_clock * 2 / 5;
+ break;
+ case TX4927_CCFG_PCIDIVMODE_3:
+ pciclk = tx4927_cpu_clock / 3;
+ break;
+ case TX4927_CCFG_PCIDIVMODE_5:
+ pciclk = tx4927_cpu_clock / 5;
+ break;
+ case TX4927_CCFG_PCIDIVMODE_6:
+ pciclk = tx4927_cpu_clock / 6;
+ break;
+ }
+
printk("Internal(%dMHz)", pciclk / 1000000);
} else {
int pciclk = 0;
":ResetRoutines\n");
_machine_restart = toshiba_rbtx4927_restart;
_machine_halt = toshiba_rbtx4927_halt;
- _machine_power_off = toshiba_rbtx4927_power_off;
+ pm_power_off = toshiba_rbtx4927_power_off;
#ifdef CONFIG_PCI
/* PCIC */
/*
* ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
- * PCIDIVMODE[12:11]'s initial value are given by S9[4:3] (ON:0, OFF:1).
+ *
+ * For TX4927:
+ * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1).
* CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5)
* CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3)
* CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5)
* CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6)
* i.e. S9[3]: ON (83MHz), OFF (100MHz)
+ *
+ * For TX4937:
+ * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1)
+ * PCIDIVMODE[10] is 0.
+ * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8)
+ * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4)
+ * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9)
+ * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5)
+ * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10)
+ * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5)
+ *
*/
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1,
- "ccfg is %lx, DIV is %x\n",
- (unsigned long) tx4927_ccfgptr->
- ccfg, TX4927_CCFG_PCIDIVMODE_MASK);
+ "ccfg is %lx, PCIDIVMODE is %x\n",
+ (unsigned long) tx4927_ccfgptr->ccfg,
+ (unsigned long) tx4927_ccfgptr->ccfg &
+ (mips_machtype == MACH_TOSHIBA_RBTX4937 ?
+ TX4937_CCFG_PCIDIVMODE_MASK :
+ TX4927_CCFG_PCIDIVMODE_MASK));
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1,
"PCI66 mode is %lx, PCI mode is %lx, pci arb is %lx\n",
(unsigned long) tx4927_ccfgptr->
ccfg & TX4927_CCFG_PCIXARB);
- TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1,
- "PCIDIVMODE is %lx\n",
- (unsigned long) tx4927_ccfgptr->
- ccfg & TX4927_CCFG_PCIDIVMODE_MASK);
-
- switch ((unsigned long) tx4927_ccfgptr->
- ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
- case TX4927_CCFG_PCIDIVMODE_2_5:
- case TX4927_CCFG_PCIDIVMODE_5:
- tx4927_cpu_clock = 166000000; /* 166MHz */
- break;
- default:
- tx4927_cpu_clock = 200000000; /* 200MHz */
- }
+ if (mips_machtype == MACH_TOSHIBA_RBTX4937)
+ switch ((unsigned long)tx4927_ccfgptr->
+ ccfg & TX4937_CCFG_PCIDIVMODE_MASK) {
+ case TX4937_CCFG_PCIDIVMODE_8:
+ case TX4937_CCFG_PCIDIVMODE_4:
+ tx4927_cpu_clock = 266666666; /* 266MHz */
+ break;
+ case TX4937_CCFG_PCIDIVMODE_9:
+ case TX4937_CCFG_PCIDIVMODE_4_5:
+ tx4927_cpu_clock = 300000000; /* 300MHz */
+ break;
+ default:
+ tx4927_cpu_clock = 333333333; /* 333MHz */
+ }
+ else
+ switch ((unsigned long)tx4927_ccfgptr->
+ ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
+ case TX4927_CCFG_PCIDIVMODE_2_5:
+ case TX4927_CCFG_PCIDIVMODE_5:
+ tx4927_cpu_clock = 166666666; /* 166MHz */
+ break;
+ default:
+ tx4927_cpu_clock = 200000000; /* 200MHz */
+ }
/* CCFG */
/* enable Timeout BusError */
#include <linux/interrupt.h>
#include <linux/console.h>
#include <linux/pci.h>
+#include <linux/pm.h>
+
#include <asm/wbflush.h>
#include <asm/reboot.h>
#include <asm/irq.h>
_machine_restart = rbtx4938_machine_restart;
_machine_halt = rbtx4938_machine_halt;
- _machine_power_off = rbtx4938_machine_power_off;
+ pm_power_off = rbtx4938_machine_power_off;
*rbtx4938_led_ptr = 0xff;
printk("RBTX4938 --- FPGA(Rev %02x)", *rbtx4938_fpga_rev_ptr);
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
+#include <linux/pm.h>
#include <linux/smp.h>
#include <linux/types.h>
_machine_restart = vr41xx_restart;
_machine_halt = vr41xx_halt;
- _machine_power_off = vr41xx_power_off;
+ pm_power_off = vr41xx_power_off;
return 0;
}
if ( opcode == 1 ) { /* GETFSIND */
len = strlen_user((char *)arg1);
printk(KERN_DEBUG "len of arg1 = %d\n", len);
-
- fsname = (char *) kmalloc(len+1, GFP_KERNEL);
+ if (len == 0)
+ return 0;
+ fsname = (char *) kmalloc(len, GFP_KERNEL);
if ( !fsname ) {
printk(KERN_DEBUG "failed to kmalloc fsname\n");
return 0;
}
- if ( copy_from_user(fsname, (char *)arg1, len+1) ) {
+ if ( copy_from_user(fsname, (char *)arg1, len) ) {
printk(KERN_DEBUG "failed to copy_from_user fsname\n");
kfree(fsname);
return 0;
}
+ /* String could be altered by userspace after strlen_user() */
+ fsname[len] = '\0';
+
printk(KERN_DEBUG "that is '%s' as (char *)\n", fsname);
if ( !strcmp(fsname, "hfs") ) {
fstype = 0;
#include <termios.h>
#include <string.h>
#include <signal.h>
+#include <sched.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
struct winch_data {
int pty_fd;
int pipe_fd;
- int close_me;
};
static int winch_thread(void *arg)
int count, err;
char c = 1;
- os_close_file(data->close_me);
pty_fd = data->pty_fd;
pipe_fd = data->pipe_fd;
count = os_write_file(pipe_fd, &c, sizeof(c));
}
data = ((struct winch_data) { .pty_fd = fd,
- .pipe_fd = fds[1],
- .close_me = fds[0] } );
- err = run_helper_thread(winch_thread, &data, 0, &stack, 0);
+ .pipe_fd = fds[1] } );
+ /* CLONE_FILES so this thread doesn't hold open files which are open
+ * now, but later closed. This is a problem with /dev/net/tun.
+ */
+ err = run_helper_thread(winch_thread, &data, CLONE_FILES, &stack, 0);
if(err < 0){
printk("fork of winch_thread failed - errno = %d\n", errno);
goto out_close;
}
- os_close_file(fds[1]);
*fd_out = fds[0];
n = os_read_file(fds[0], &c, sizeof(c));
if(n != sizeof(c)){
printk("read failed, err = %d\n", -n);
printk("fd %d will not support SIGWINCH\n", fd);
err = -EINVAL;
- goto out_close1;
+ goto out_close;
}
return err ;
out_close:
os_close_file(fds[1]);
- out_close1:
os_close_file(fds[0]);
out:
return err;
SA_INTERRUPT | SA_SHIRQ, dev->name, dev);
if(err != 0){
printk(KERN_ERR "uml_net_open: failed to get irq(%d)\n", err);
- if(lp->close != NULL) (*lp->close)(lp->fd, &lp->user);
- lp->fd = -1;
err = -ENETUNREACH;
+ goto out_close;
}
lp->tl.data = (unsigned long) &lp->user;
*/
while((err = uml_net_rx(dev)) > 0) ;
- out:
spin_unlock(&lp->lock);
- return(err);
+
+ spin_lock(&opened_lock);
+ list_add(&lp->list, &opened);
+ spin_unlock(&opened_lock);
+
+ return 0;
+out_close:
+ if(lp->close != NULL) (*lp->close)(lp->fd, &lp->user);
+ lp->fd = -1;
+out:
+ spin_unlock(&lp->lock);
+ return err;
}
static int uml_net_close(struct net_device *dev)
if(lp->close != NULL)
(*lp->close)(lp->fd, &lp->user);
lp->fd = -1;
- list_del(&lp->list);
spin_unlock(&lp->lock);
+
+ spin_lock(&opened_lock);
+ list_del(&lp->list);
+ spin_unlock(&opened_lock);
+
return 0;
}
if (device->have_mac)
set_ether_mac(dev, device->mac);
- spin_lock(&opened_lock);
- list_add(&lp->list, &opened);
- spin_unlock(&opened_lock);
-
- return(0);
+ return 0;
}
static struct uml_net *find_device(int n)
extern void save_registers(int pid, union uml_pt_regs *regs);
extern void restore_registers(int pid, union uml_pt_regs *regs);
extern void init_registers(int pid);
-extern void get_safe_registers(unsigned long * regs);
+extern void get_safe_registers(unsigned long * regs, unsigned long * fp_regs);
extern void get_thread_regs(union uml_pt_regs *uml_regs, void *buffer);
#endif
+++ /dev/null
-/*
- * Copyright (C) 2002- 2004 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <errno.h>
-#include <signal.h>
-#include <setjmp.h>
-#include <sched.h>
-#include <sys/wait.h>
-#include <sys/mman.h>
-#include <sys/user.h>
-#include <sys/time.h>
-#include <asm/unistd.h>
-#include <asm/types.h>
-#include "user.h"
-#include "ptrace_user.h"
-#include "sysdep/ptrace.h"
-#include "user_util.h"
-#include "kern_util.h"
-#include "skas.h"
-#include "stub-data.h"
-#include "mm_id.h"
-#include "sysdep/sigcontext.h"
-#include "sysdep/stub.h"
-#include "os.h"
-#include "proc_mm.h"
-#include "skas_ptrace.h"
-#include "chan_user.h"
-#include "registers.h"
-#include "mem.h"
-#include "uml-config.h"
-#include "process.h"
-
-int is_skas_winch(int pid, int fd, void *data)
-{
- if(pid != os_getpgrp())
- return(0);
-
- register_winch_irq(-1, fd, -1, data);
- return(1);
-}
-
-void wait_stub_done(int pid, int sig, char * fname)
-{
- int n, status, err;
-
- do {
- if ( sig != -1 ) {
- err = ptrace(PTRACE_CONT, pid, 0, sig);
- if(err)
- panic("%s : continue failed, errno = %d\n",
- fname, errno);
- }
- sig = 0;
-
- CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
- } while((n >= 0) && WIFSTOPPED(status) &&
- ((WSTOPSIG(status) == SIGVTALRM) ||
- /* running UML inside a detached screen can cause
- * SIGWINCHes
- */
- (WSTOPSIG(status) == SIGWINCH)));
-
- if((n < 0) || !WIFSTOPPED(status) ||
- (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){
- unsigned long regs[HOST_FRAME_SIZE];
- if(ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
- printk("Failed to get registers from stub, "
- "errno = %d\n", errno);
- else {
- int i;
-
- printk("Stub registers -\n");
- for(i = 0; i < HOST_FRAME_SIZE; i++)
- printk("\t%d - %lx\n", i, regs[i]);
- }
- panic("%s : failed to wait for SIGUSR1/SIGTRAP, "
- "pid = %d, n = %d, errno = %d, status = 0x%x\n",
- fname, pid, n, errno, status);
- }
-}
-
-void get_skas_faultinfo(int pid, struct faultinfo * fi)
-{
- int err;
-
- if(ptrace_faultinfo){
- err = ptrace(PTRACE_FAULTINFO, pid, 0, fi);
- if(err)
- panic("get_skas_faultinfo - PTRACE_FAULTINFO failed, "
- "errno = %d\n", errno);
-
- /* Special handling for i386, which has different structs */
- if (sizeof(struct ptrace_faultinfo) < sizeof(struct faultinfo))
- memset((char *)fi + sizeof(struct ptrace_faultinfo), 0,
- sizeof(struct faultinfo) -
- sizeof(struct ptrace_faultinfo));
- }
- else {
- wait_stub_done(pid, SIGSEGV, "get_skas_faultinfo");
-
- /* faultinfo is prepared by the stub-segv-handler at start of
- * the stub stack page. We just have to copy it.
- */
- memcpy(fi, (void *)current_stub_stack(), sizeof(*fi));
- }
-}
-
-static void handle_segv(int pid, union uml_pt_regs * regs)
-{
- get_skas_faultinfo(pid, ®s->skas.faultinfo);
- segv(regs->skas.faultinfo, 0, 1, NULL);
-}
-
-/*To use the same value of using_sysemu as the caller, ask it that value (in local_using_sysemu)*/
-static void handle_trap(int pid, union uml_pt_regs *regs, int local_using_sysemu)
-{
- int err, status;
-
- /* Mark this as a syscall */
- UPT_SYSCALL_NR(regs) = PT_SYSCALL_NR(regs->skas.regs);
-
- if (!local_using_sysemu)
- {
- err = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_NR_OFFSET, __NR_getpid);
- if(err < 0)
- panic("handle_trap - nullifying syscall failed errno = %d\n",
- errno);
-
- err = ptrace(PTRACE_SYSCALL, pid, 0, 0);
- if(err < 0)
- panic("handle_trap - continuing to end of syscall failed, "
- "errno = %d\n", errno);
-
- CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED));
- if((err < 0) || !WIFSTOPPED(status) ||
- (WSTOPSIG(status) != SIGTRAP + 0x80))
- panic("handle_trap - failed to wait at end of syscall, "
- "errno = %d, status = %d\n", errno, status);
- }
-
- handle_syscall(regs);
-}
-
-extern int __syscall_stub_start;
-int stub_code_fd = -1;
-__u64 stub_code_offset;
-
-static int userspace_tramp(void *stack)
-{
- void *addr;
-
- ptrace(PTRACE_TRACEME, 0, 0, 0);
-
- init_new_thread_signals(1);
- enable_timer();
-
- if(!proc_mm){
- /* This has a pte, but it can't be mapped in with the usual
- * tlb_flush mechanism because this is part of that mechanism
- */
- addr = mmap64((void *) UML_CONFIG_STUB_CODE, page_size(),
- PROT_EXEC, MAP_FIXED | MAP_PRIVATE,
- stub_code_fd, stub_code_offset);
- if(addr == MAP_FAILED){
- printk("mapping stub code failed, errno = %d\n",
- errno);
- exit(1);
- }
-
- if(stack != NULL){
- int fd;
- __u64 offset;
-
- fd = phys_mapping(to_phys(stack), &offset);
- addr = mmap((void *) UML_CONFIG_STUB_DATA, page_size(),
- PROT_READ | PROT_WRITE,
- MAP_FIXED | MAP_SHARED, fd, offset);
- if(addr == MAP_FAILED){
- printk("mapping stub stack failed, "
- "errno = %d\n", errno);
- exit(1);
- }
- }
- }
- if(!ptrace_faultinfo){
- unsigned long v = UML_CONFIG_STUB_CODE +
- (unsigned long) stub_segv_handler -
- (unsigned long) &__syscall_stub_start;
-
- set_sigstack((void *) UML_CONFIG_STUB_DATA, page_size());
- set_handler(SIGSEGV, (void *) v, SA_ONSTACK,
- SIGIO, SIGWINCH, SIGALRM, SIGVTALRM,
- SIGUSR1, -1);
- }
-
- os_stop_process(os_getpid());
- return(0);
-}
-
-/* Each element set once, and only accessed by a single processor anyway */
-#undef NR_CPUS
-#define NR_CPUS 1
-int userspace_pid[NR_CPUS];
-
-int start_userspace(unsigned long stub_stack)
-{
- void *stack;
- unsigned long sp;
- int pid, status, n, flags;
-
- if ( stub_code_fd == -1 )
- stub_code_fd = phys_mapping(to_phys(&__syscall_stub_start),
- &stub_code_offset);
-
- stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC,
- MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
- if(stack == MAP_FAILED)
- panic("start_userspace : mmap failed, errno = %d", errno);
- sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *);
-
- flags = CLONE_FILES | SIGCHLD;
- if(proc_mm) flags |= CLONE_VM;
- pid = clone(userspace_tramp, (void *) sp, flags, (void *) stub_stack);
- if(pid < 0)
- panic("start_userspace : clone failed, errno = %d", errno);
-
- do {
- CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
- if(n < 0)
- panic("start_userspace : wait failed, errno = %d",
- errno);
- } while(WIFSTOPPED(status) && (WSTOPSIG(status) == SIGVTALRM));
-
- if(!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP))
- panic("start_userspace : expected SIGSTOP, got status = %d",
- status);
-
- if (ptrace(PTRACE_OLDSETOPTIONS, pid, NULL, (void *)PTRACE_O_TRACESYSGOOD) < 0)
- panic("start_userspace : PTRACE_SETOPTIONS failed, errno=%d\n",
- errno);
-
- if(munmap(stack, PAGE_SIZE) < 0)
- panic("start_userspace : munmap failed, errno = %d\n", errno);
-
- return(pid);
-}
-
-void userspace(union uml_pt_regs *regs)
-{
- int err, status, op, pid = userspace_pid[0];
- int local_using_sysemu; /*To prevent races if using_sysemu changes under us.*/
-
- while(1){
- restore_registers(pid, regs);
-
- /* Now we set local_using_sysemu to be used for one loop */
- local_using_sysemu = get_using_sysemu();
-
- op = SELECT_PTRACE_OPERATION(local_using_sysemu, singlestepping(NULL));
-
- err = ptrace(op, pid, 0, 0);
- if(err)
- panic("userspace - could not resume userspace process, "
- "pid=%d, ptrace operation = %d, errno = %d\n",
- op, errno);
-
- CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED));
- if(err < 0)
- panic("userspace - waitpid failed, errno = %d\n",
- errno);
-
- regs->skas.is_user = 1;
- save_registers(pid, regs);
- UPT_SYSCALL_NR(regs) = -1; /* Assume: It's not a syscall */
-
- if(WIFSTOPPED(status)){
- switch(WSTOPSIG(status)){
- case SIGSEGV:
- if(PTRACE_FULL_FAULTINFO || !ptrace_faultinfo)
- user_signal(SIGSEGV, regs, pid);
- else handle_segv(pid, regs);
- break;
- case SIGTRAP + 0x80:
- handle_trap(pid, regs, local_using_sysemu);
- break;
- case SIGTRAP:
- relay_signal(SIGTRAP, regs);
- break;
- case SIGIO:
- case SIGVTALRM:
- case SIGILL:
- case SIGBUS:
- case SIGFPE:
- case SIGWINCH:
- user_signal(WSTOPSIG(status), regs, pid);
- break;
- default:
- printk("userspace - child stopped with signal "
- "%d\n", WSTOPSIG(status));
- }
- pid = userspace_pid[0];
- interrupt_end();
-
- /* Avoid -ERESTARTSYS handling in host */
- PT_SYSCALL_NR(regs->skas.regs) = -1;
- }
- }
-}
-#define INIT_JMP_NEW_THREAD 0
-#define INIT_JMP_REMOVE_SIGSTACK 1
-#define INIT_JMP_CALLBACK 2
-#define INIT_JMP_HALT 3
-#define INIT_JMP_REBOOT 4
-
-
-int copy_context_skas0(unsigned long new_stack, int pid)
-{
- int err;
- unsigned long regs[MAX_REG_NR];
- unsigned long current_stack = current_stub_stack();
- struct stub_data *data = (struct stub_data *) current_stack;
- struct stub_data *child_data = (struct stub_data *) new_stack;
- __u64 new_offset;
- int new_fd = phys_mapping(to_phys((void *)new_stack), &new_offset);
-
- /* prepare offset and fd of child's stack as argument for parent's
- * and child's mmap2 calls
- */
- *data = ((struct stub_data) { .offset = MMAP_OFFSET(new_offset),
- .fd = new_fd,
- .timer = ((struct itimerval)
- { { 0, 1000000 / hz() },
- { 0, 1000000 / hz() }})});
- get_safe_registers(regs);
-
- /* Set parent's instruction pointer to start of clone-stub */
- regs[REGS_IP_INDEX] = UML_CONFIG_STUB_CODE +
- (unsigned long) stub_clone_handler -
- (unsigned long) &__syscall_stub_start;
- regs[REGS_SP_INDEX] = UML_CONFIG_STUB_DATA + PAGE_SIZE -
- sizeof(void *);
- err = ptrace_setregs(pid, regs);
- if(err < 0)
- panic("copy_context_skas0 : PTRACE_SETREGS failed, "
- "pid = %d, errno = %d\n", pid, errno);
-
- /* set a well known return code for detection of child write failure */
- child_data->err = 12345678;
-
- /* Wait, until parent has finished its work: read child's pid from
- * parent's stack, and check, if bad result.
- */
- wait_stub_done(pid, 0, "copy_context_skas0");
-
- pid = data->err;
- if(pid < 0)
- panic("copy_context_skas0 - stub-parent reports error %d\n",
- pid);
-
- /* Wait, until child has finished too: read child's result from
- * child's stack and check it.
- */
- wait_stub_done(pid, -1, "copy_context_skas0");
- if (child_data->err != UML_CONFIG_STUB_DATA)
- panic("copy_context_skas0 - stub-child reports error %d\n",
- child_data->err);
-
- if (ptrace(PTRACE_OLDSETOPTIONS, pid, NULL,
- (void *)PTRACE_O_TRACESYSGOOD) < 0)
- panic("copy_context_skas0 : PTRACE_SETOPTIONS failed, "
- "errno = %d\n", errno);
-
- return pid;
-}
-
-/*
- * This is used only, if stub pages are needed, while proc_mm is
- * availabl. Opening /proc/mm creates a new mm_context, which lacks
- * the stub-pages. Thus, we map them using /proc/mm-fd
- */
-void map_stub_pages(int fd, unsigned long code,
- unsigned long data, unsigned long stack)
-{
- struct proc_mm_op mmop;
- int n;
-
- mmop = ((struct proc_mm_op) { .op = MM_MMAP,
- .u =
- { .mmap =
- { .addr = code,
- .len = PAGE_SIZE,
- .prot = PROT_EXEC,
- .flags = MAP_FIXED | MAP_PRIVATE,
- .fd = stub_code_fd,
- .offset = stub_code_offset
- } } });
- n = os_write_file(fd, &mmop, sizeof(mmop));
- if(n != sizeof(mmop))
- panic("map_stub_pages : /proc/mm map for code failed, "
- "err = %d\n", -n);
-
- if ( stack ) {
- __u64 map_offset;
- int map_fd = phys_mapping(to_phys((void *)stack), &map_offset);
- mmop = ((struct proc_mm_op)
- { .op = MM_MMAP,
- .u =
- { .mmap =
- { .addr = data,
- .len = PAGE_SIZE,
- .prot = PROT_READ | PROT_WRITE,
- .flags = MAP_FIXED | MAP_SHARED,
- .fd = map_fd,
- .offset = map_offset
- } } });
- n = os_write_file(fd, &mmop, sizeof(mmop));
- if(n != sizeof(mmop))
- panic("map_stub_pages : /proc/mm map for data failed, "
- "err = %d\n", -n);
- }
-}
-
-void new_thread(void *stack, void **switch_buf_ptr, void **fork_buf_ptr,
- void (*handler)(int))
-{
- unsigned long flags;
- sigjmp_buf switch_buf, fork_buf;
-
- *switch_buf_ptr = &switch_buf;
- *fork_buf_ptr = &fork_buf;
-
- /* Somewhat subtle - siglongjmp restores the signal mask before doing
- * the longjmp. This means that when jumping from one stack to another
- * when the target stack has interrupts enabled, an interrupt may occur
- * on the source stack. This is bad when starting up a process because
- * it's not supposed to get timer ticks until it has been scheduled.
- * So, we disable interrupts around the sigsetjmp to ensure that
- * they can't happen until we get back here where they are safe.
- */
- flags = get_signals();
- block_signals();
- if(sigsetjmp(fork_buf, 1) == 0)
- new_thread_proc(stack, handler);
-
- remove_sigstack();
-
- set_signals(flags);
-}
-
-void thread_wait(void *sw, void *fb)
-{
- sigjmp_buf buf, **switch_buf = sw, *fork_buf;
-
- *switch_buf = &buf;
- fork_buf = fb;
- if(sigsetjmp(buf, 1) == 0)
- siglongjmp(*fork_buf, INIT_JMP_REMOVE_SIGSTACK);
-}
-
-void switch_threads(void *me, void *next)
-{
- sigjmp_buf my_buf, **me_ptr = me, *next_buf = next;
-
- *me_ptr = &my_buf;
- if(sigsetjmp(my_buf, 1) == 0)
- siglongjmp(*next_buf, 1);
-}
-
-static sigjmp_buf initial_jmpbuf;
-
-/* XXX Make these percpu */
-static void (*cb_proc)(void *arg);
-static void *cb_arg;
-static sigjmp_buf *cb_back;
-
-int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr)
-{
- sigjmp_buf **switch_buf = switch_buf_ptr;
- int n;
-
- set_handler(SIGWINCH, (__sighandler_t) sig_handler,
- SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGALRM,
- SIGVTALRM, -1);
-
- *fork_buf_ptr = &initial_jmpbuf;
- n = sigsetjmp(initial_jmpbuf, 1);
- switch(n){
- case INIT_JMP_NEW_THREAD:
- new_thread_proc((void *) stack, new_thread_handler);
- break;
- case INIT_JMP_REMOVE_SIGSTACK:
- remove_sigstack();
- break;
- case INIT_JMP_CALLBACK:
- (*cb_proc)(cb_arg);
- siglongjmp(*cb_back, 1);
- break;
- case INIT_JMP_HALT:
- kmalloc_ok = 0;
- return(0);
- case INIT_JMP_REBOOT:
- kmalloc_ok = 0;
- return(1);
- default:
- panic("Bad sigsetjmp return in start_idle_thread - %d\n", n);
- }
- siglongjmp(**switch_buf, 1);
-}
-
-void initial_thread_cb_skas(void (*proc)(void *), void *arg)
-{
- sigjmp_buf here;
-
- cb_proc = proc;
- cb_arg = arg;
- cb_back = &here;
-
- block_signals();
- if(sigsetjmp(here, 1) == 0)
- siglongjmp(initial_jmpbuf, INIT_JMP_CALLBACK);
- unblock_signals();
-
- cb_proc = NULL;
- cb_arg = NULL;
- cb_back = NULL;
-}
-
-void halt_skas(void)
-{
- block_signals();
- siglongjmp(initial_jmpbuf, INIT_JMP_HALT);
-}
-
-void reboot_skas(void)
-{
- block_signals();
- siglongjmp(initial_jmpbuf, INIT_JMP_REBOOT);
-}
-
-void switch_mm_skas(struct mm_id *mm_idp)
-{
- int err;
-
-#warning need cpu pid in switch_mm_skas
- if(proc_mm){
- err = ptrace(PTRACE_SWITCH_MM, userspace_pid[0], 0,
- mm_idp->u.mm_fd);
- if(err)
- panic("switch_mm_skas - PTRACE_SWITCH_MM failed, "
- "errno = %d\n", errno);
- }
- else userspace_pid[0] = mm_idp->u.pid;
-}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
" root=/dev/ubd5\n\n"
);
+#ifndef CONFIG_MODE_TT
+
+static int __init no_skas_debug_setup(char *line, int *add)
+{
+ printf("'debug' is not necessary to gdb UML in skas mode - run \n");
+ printf("'gdb linux' and disable CONFIG_CMDLINE_ON_HOST if gdb \n");
+ printf("doesn't work as expected\n");
+
+ return 0;
+}
+
+__uml_setup("debug", no_skas_debug_setup,
+"debug\n"
+" this flag is not needed to run gdb on UML in skas mode\n\n"
+);
+
+#endif
+
#ifdef CONFIG_SMP
static int __init uml_ncpus_setup(char *line, int *add)
{
return(-EINVAL);
}
*fd_out = ((int *) CMSG_DATA(cmsg))[0];
+ os_set_exec_close(*fd_out, 1);
return(0);
}
return(err);
if(pri->fixed_config){
- pri->fd = os_open_file("/dev/net/tun", of_rdwr(OPENFLAGS()), 0);
+ pri->fd = os_open_file("/dev/net/tun",
+ of_cloexec(of_rdwr(OPENFLAGS())), 0);
if(pri->fd < 0){
printk("Failed to open /dev/net/tun, err = %d\n",
-pri->fd);
multi_count++;
- get_safe_registers(regs);
+ get_safe_registers(regs, NULL);
regs[REGS_IP_INDEX] = UML_CONFIG_STUB_CODE +
((unsigned long) &batch_syscall_stub -
(unsigned long) &__syscall_stub_start);
}
}
}
-#define INIT_JMP_NEW_THREAD 0
-#define INIT_JMP_REMOVE_SIGSTACK 1
-#define INIT_JMP_CALLBACK 2
-#define INIT_JMP_HALT 3
-#define INIT_JMP_REBOOT 4
int copy_context_skas0(unsigned long new_stack, int pid)
{
int err;
- unsigned long regs[MAX_REG_NR];
+ unsigned long regs[HOST_FRAME_SIZE];
+ unsigned long fp_regs[HOST_FP_SIZE];
unsigned long current_stack = current_stub_stack();
struct stub_data *data = (struct stub_data *) current_stack;
struct stub_data *child_data = (struct stub_data *) new_stack;
.timer = ((struct itimerval)
{ { 0, 1000000 / hz() },
{ 0, 1000000 / hz() }})});
- get_safe_registers(regs);
+ get_safe_registers(regs, fp_regs);
/* Set parent's instruction pointer to start of clone-stub */
regs[REGS_IP_INDEX] = UML_CONFIG_STUB_CODE +
panic("copy_context_skas0 : PTRACE_SETREGS failed, "
"pid = %d, errno = %d\n", pid, errno);
+ err = ptrace_setfpregs(pid, fp_regs);
+ if(err < 0)
+ panic("copy_context_skas0 : PTRACE_SETFPREGS failed, "
+ "pid = %d, errno = %d\n", pid, errno);
+
/* set a well known return code for detection of child write failure */
child_data->err = 12345678;
set_signals(flags);
}
+#define INIT_JMP_NEW_THREAD 0
+#define INIT_JMP_REMOVE_SIGSTACK 1
+#define INIT_JMP_CALLBACK 2
+#define INIT_JMP_HALT 3
+#define INIT_JMP_REBOOT 4
+
void thread_wait(void *sw, void *fb)
{
sigjmp_buf buf, **switch_buf = sw, *fork_buf;
int pid = os_getpid(), ppid = getppid();
int sc_result;
+ change_sig(SIGWINCH, 0);
if(ptrace(PTRACE_TRACEME, 0, 0, 0) < 0){
perror("ptrace");
os_kill_process(pid, 0);
err);
}
-void get_safe_registers(unsigned long *regs)
+void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)
{
memcpy(regs, exec_regs, HOST_FRAME_SIZE * sizeof(unsigned long));
+ if(fp_regs != NULL)
+ memcpy(fp_regs, exec_fp_regs,
+ HOST_FP_SIZE * sizeof(unsigned long));
}
void get_thread_regs(union uml_pt_regs *uml_regs, void *buffer)
err);
}
-void get_safe_registers(unsigned long *regs)
+void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)
{
memcpy(regs, exec_regs, HOST_FRAME_SIZE * sizeof(unsigned long));
+ if(fp_regs != NULL)
+ memcpy(fp_regs, exec_fp_regs,
+ HOST_FP_SIZE * sizeof(unsigned long));
}
void get_thread_regs(union uml_pt_regs *uml_regs, void *buffer)
return(0);
}
+int ptrace_setfpregs(long pid, unsigned long *regs)
+{
+ if (ptrace(PTRACE_SETFPREGS, pid, 0, regs) < 0)
+ return -errno;
+ return 0;
+}
+
void ptrace_pokeuser(unsigned long addr, unsigned long data)
{
panic("ptrace_pokeuser");
#endif
DEFINE_LONGS(HOST_FRAME_SIZE, FRAME_SIZE);
- DEFINE(HOST_FP_SIZE, 0);
+ DEFINE(HOST_FP_SIZE, sizeof(struct _fpstate) / sizeof(unsigned long));
DEFINE(HOST_XFP_SIZE, 0);
DEFINE_LONGS(HOST_RBX, RBX);
DEFINE_LONGS(HOST_RCX, RCX);
#include <asm/nmi.h>
#include <asm/irq.h>
#include <asm/hw_irq.h>
+#include <asm/numa.h>
/* Number of siblings per CPU package */
int smp_num_siblings = 1;
if (boot_error) {
cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */
clear_bit(cpu, &cpu_initialized); /* was set by cpu_init() */
+ clear_node_cpumask(cpu); /* was set by numa_add_cpu */
cpu_clear(cpu, cpu_present_map);
cpu_clear(cpu, cpu_possible_map);
x86_cpu_to_apicid[cpu] = BAD_APICID;
cpu_clear(cpu, cpu_callout_map);
cpu_clear(cpu, cpu_callin_map);
clear_bit(cpu, &cpu_initialized); /* was set by cpu_init() */
+ clear_node_cpumask(cpu);
}
int __cpu_disable(void)
obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_MMC) += mmc/
obj-$(CONFIG_INFINIBAND) += infiniband/
-obj-$(CONFIG_SGI_IOC4) += sn/
+obj-$(CONFIG_SGI_SN) += sn/
obj-y += firmware/
obj-$(CONFIG_CRYPTO) += crypto/
obj-$(CONFIG_SUPERH) += sh/
decl_subsys(bus, &ktype_bus, NULL);
+#ifdef CONFIG_HOTPLUG
+
/* Manually detach a device from its associated driver. */
static int driver_helper(struct device *dev, void *data)
{
}
static DRIVER_ATTR(bind, S_IWUSR, NULL, driver_bind);
+#endif
static struct device * next_device(struct klist_iter * i)
{
{
CommandList_struct *cmd = rq->completion_data;
ctlr_info_t *h = hba[cmd->ctlr];
+ unsigned long flags;
u64bit temp64;
int i, ddir;
printk("Done with %p\n", rq);
#endif /* CCISS_DEBUG */
- spin_lock_irq(&h->lock);
+ spin_lock_irqsave(&h->lock, flags);
end_that_request_last(rq, rq->errors);
cmd_free(h, cmd,1);
- spin_unlock_irq(&h->lock);
+ spin_unlock_irqrestore(&h->lock, flags);
}
/* checks the status of the job and calls complete buffers to mark all
if (lba48) {
task_ioreg_t tasklets[10];
- pr_debug("%s: LBA=0x%012llx\n", drive->name, block);
+ pr_debug("%s: LBA=0x%012llx\n", drive->name,
+ (unsigned long long)block);
tasklets[0] = 0;
tasklets[1] = 0;
pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n",
drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
- block, rq->nr_sectors, (unsigned long)rq->buffer);
+ (unsigned long long)block, rq->nr_sectors,
+ (unsigned long)rq->buffer);
if (hwif->rw_disk)
hwif->rw_disk(drive, rq);
select DVB_STV0299
select DVB_MT352
select DVB_MT312
- select DVB_NXT2002
+ select DVB_NXT200X
select DVB_STV0297
select DVB_BCM3510
select DVB_LGDT330X
int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
-int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx);
int flexcop_dma_xfer_control(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index, int onoff);
int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles);
-int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets);
/* from flexcop-eeprom.c */
/* the PCI part uses this call to get the MAC address, the USB part has its own */
}
EXPORT_SYMBOL(flexcop_dma_config_timer);
-/* packet IRQ does not exist in FCII or FCIIb - according to data book and tests */
-int flexcop_dma_control_packet_irq(struct flexcop_device *fc,
- flexcop_dma_index_t no,
- int onoff)
-{
- flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
-
- deb_rdump("reg: %03x: %x\n",ctrl_208,v.raw);
- if (no & FC_DMA_1)
- v.ctrl_208.DMA1_Size_IRQ_Enable_sig = onoff;
-
- if (no & FC_DMA_2)
- v.ctrl_208.DMA2_Size_IRQ_Enable_sig = onoff;
-
- fc->write_ibi_reg(fc,ctrl_208,v);
- deb_rdump("reg: %03x: %x\n",ctrl_208,v.raw);
-
- return 0;
-}
-EXPORT_SYMBOL(flexcop_dma_control_packet_irq);
-
-int flexcop_dma_config_packet_count(struct flexcop_device *fc,
- flexcop_dma_index_t dma_idx,
- u8 packets)
-{
- flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014;
- flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
-
- flexcop_dma_remap(fc,dma_idx,1);
-
- v.dma_0x4_remap.DMA_maxpackets = packets;
- fc->write_ibi_reg(fc,r,v);
- return 0;
-}
-EXPORT_SYMBOL(flexcop_dma_config_packet_count);
#include "stv0299.h"
#include "mt352.h"
-#include "nxt2002.h"
+#include "nxt200x.h"
#include "bcm3510.h"
#include "stv0297.h"
#include "mt312.h"
.clock_polarity_flip = 1,
};
-static struct nxt2002_config samsung_tbmv_config = {
+static struct nxt200x_config samsung_tbmv_config = {
.demod_address = 0x0a,
- .request_firmware = flexcop_fe_request_firmware,
+ .pll_address = 0xc2,
+ .pll_desc = &dvb_pll_samsung_tbmv,
};
static struct bcm3510_config air2pc_atsc_first_gen_config = {
info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
} else
/* try the air atsc 2nd generation (nxt2002) */
- if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
+ if ((fc->fe = nxt200x_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
fc->dev_type = FC_AIR_ATSC2;
info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
} else
/* bus parts have to decide if hw pid filtering is used or not. */
}
-const char *flexcop_revision_names[] = {
+static const char *flexcop_revision_names[] = {
"Unkown chip",
"FlexCopII",
"FlexCopIIb",
"FlexCopIII",
};
-const char *flexcop_device_names[] = {
+static const char *flexcop_device_names[] = {
"Unkown device",
"Air2PC/AirStar 2 DVB-T",
"Air2PC/AirStar 2 ATSC 1st generation",
"Air2PC/AirStar 2 ATSC 3rd generation (HD5000)",
};
-const char *flexcop_bus_names[] = {
+static const char *flexcop_bus_names[] = {
"USB",
"PCI",
};
fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
- deb_irq("%u irq: %08x cur_addr: %08x: cur_pos: %08x, last_cur_pos: %08x ",
- jiffies_to_usecs(jiffies - fc_pci->last_irq),v.raw,cur_addr,cur_pos,fc_pci->last_dma1_cur_pos);
+ deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, last_cur_pos: %08x ",
+ jiffies_to_usecs(jiffies - fc_pci->last_irq),
+ v.raw, (unsigned long long)cur_addr, cur_pos,
+ fc_pci->last_dma1_cur_pos);
fc_pci->last_irq = jiffies;
/* buffer end was reached, restarted from the beginning
FLEXCOP_III,
} flexcop_revision_t;
-extern const char *flexcop_revision_names[];
-
typedef enum {
FC_UNK = 0,
FC_AIR_DVB,
FC_PCI,
} flexcop_bus_t;
-extern const char *flexcop_device_names[];
-
/* FlexCop IBI Registers */
#if defined(__LITTLE_ENDIAN)
#include "flexcop_ibi_value_le.h"
EXPORT_SYMBOL(bt878_device_control);
+
+struct cards card_list[] __devinitdata = {
+
+ { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
+ { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
+ { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
+ { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
+ { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
+ { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
+ { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
+ { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
+ { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
+ { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
+ { 0, -1, NULL }
+};
+
+
/***********************/
/* PCI device handling */
/***********************/
static int __devinit bt878_probe(struct pci_dev *dev,
const struct pci_device_id *pci_id)
{
- int result;
+ int result = 0, has_dvb = 0, i;
unsigned char lat;
struct bt878 *bt;
#if defined(__powerpc__)
unsigned int cmd;
#endif
+ unsigned int cardid;
+ unsigned short id;
+ struct cards *dvb_cards;
printk(KERN_INFO "bt878: Bt878 AUDIO function found (%d).\n",
bt878_num);
if (pci_enable_device(dev))
return -EIO;
+ pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &id);
+ cardid = id << 16;
+ pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &id);
+ cardid |= id;
+
+ for (i = 0, dvb_cards = card_list; i < ARRAY_SIZE(card_list); i++, dvb_cards++) {
+ if (cardid == dvb_cards->pci_id) {
+ printk("%s: card id=[0x%x],[ %s ] has DVB functions.\n",
+ __func__, cardid, dvb_cards->name);
+ has_dvb = 1;
+ }
+ }
+
+ if (!has_dvb) {
+ printk("%s: card id=[0x%x], Unknown card.\nExiting..\n", __func__, cardid);
+ result = -EINVAL;
+
+ goto fail0;
+ }
+
bt = &bt878[bt878_num];
bt->dev = dev;
bt->nr = bt878_num;
pci_read_config_byte(dev, PCI_CLASS_REVISION, &bt->revision);
pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+
+
printk(KERN_INFO "bt878(%d): Bt%x (rev %d) at %02x:%02x.%x, ",
bt878_num, bt->id, bt->revision, dev->bus->number,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
#define BT878_RISC_SYNC_MASK (1 << 15)
+
+#define BTTV_BOARD_UNKNOWN 0x00
+#define BTTV_BOARD_PINNACLESAT 0x5e
+#define BTTV_BOARD_NEBULA_DIGITV 0x68
+#define BTTV_BOARD_PC_HDTV 0x70
+#define BTTV_BOARD_TWINHAN_DST 0x71
+#define BTTV_BOARD_AVDVBT_771 0x7b
+#define BTTV_BOARD_AVDVBT_761 0x7c
+#define BTTV_BOARD_DVICO_DVBT_LITE 0x80
+#define BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE 0x87
+
+struct cards {
+ __u32 pci_id;
+ __u16 card_id;
+ char *name;
+};
+
extern int bt878_num;
struct bt878 {
Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
config DVB_USB_CXUSB
- tristate "Medion MD95700 hybrid USB2.0 (Conexant) support"
+ tristate "Conexant USB2.0 hybrid reference design support"
depends on DVB_USB
select DVB_CX22702
+ select DVB_LGDT330X
+ select DVB_MT352
help
- Say Y here to support the Medion MD95700 hybrid USB2.0 device. Currently
- only the DVB-T part is supported.
+ Say Y here to support the Conexant USB2.0 hybrid reference design.
+ Currently, only DVB and ATSC modes are supported, analog mode
+ shall be added in the future. Devices that require this module:
+
+ Medion MD95700 hybrid USB2.0 device.
+ DViCO FusionHDTV (Bluebird) USB2.0 devices
config DVB_USB_DIGITV
tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"
return 0;
}
-struct dvb_usb_rc_key dvico_mce_rc_keys[] = {
+static struct dvb_usb_rc_key dvico_mce_rc_keys[] = {
{ 0xfe, 0x02, KEY_TV },
{ 0xfe, 0x0e, KEY_MP3 },
{ 0xfe, 0x1a, KEY_DVD },
static int cxusb_dee1601_demod_init(struct dvb_frontend* fe)
{
- static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x38 };
+ static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 };
static u8 reset [] = { RESET, 0x80 };
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 };
static int cxusb_mt352_demod_init(struct dvb_frontend* fe)
{ /* used in both lgz201 and th7579 */
- static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x39 };
+ static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x29 };
static u8 reset [] = { RESET, 0x80 };
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
static u8 agc_cfg [] = { AGC_TARGET, 0x24, 0x20 };
return 0;
}
-struct cx22702_config cxusb_cx22702_config = {
+static struct cx22702_config cxusb_cx22702_config = {
.demod_address = 0x63,
.output_mode = CX22702_PARALLEL_OUTPUT,
.pll_set = dvb_usb_pll_set_i2c,
};
-struct lgdt330x_config cxusb_lgdt330x_config = {
+static struct lgdt330x_config cxusb_lgdt330x_config = {
.demod_address = 0x0e,
.demod_chip = LGDT3303,
.pll_set = dvb_usb_pll_set_i2c,
};
-struct mt352_config cxusb_dee1601_config = {
+static struct mt352_config cxusb_dee1601_config = {
.demod_address = 0x0f,
.demod_init = cxusb_dee1601_demod_init,
.pll_set = dvb_usb_pll_set,
if ((ret = dvb_usb_device_init(intf,&digitv_properties,THIS_MODULE,&d)) == 0) {
u8 b[4] = { 0 };
- b[0] = 1;
- digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0);
+ if (d != NULL) { /* do that only when the firmware is loaded */
+ b[0] = 1;
+ digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0);
- b[0] = 0;
- digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
+ b[0] = 0;
+ digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
+ }
}
return ret;
}
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = CYPRESS_FX2,
- .firmware = "dvb-usb-digitv-01.fw",
+ .firmware = "dvb-usb-digitv-02.fw",
.size_of_priv = 0,
{ &digitv_table[0], NULL },
{ NULL },
},
+ { NULL },
}
};
{ .id = CYPRESS_FX2, .name = "Cypress FX2", .cpu_cs_register = 0xe600 },
};
+static int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx,
+ int *pos);
+
/*
* load a firmware packet to the device
*/
return ret;
}
-int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, int *pos)
+static int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx,
+ int *pos)
{
u8 *b = (u8 *) &fw->data[*pos];
int data_offs = 4;
return *pos;
}
-EXPORT_SYMBOL(dvb_usb_get_hexline);
-
u8 data[255];
u8 chk;
};
-extern int dvb_usb_get_hexline(const struct firmware *, struct hexline *, int *);
extern int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw, int type);
#endif
return ret;
}
-int vp702x_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
+static int vp702x_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
+ u16 index, u8 *b, int blen)
{
deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
debug_dump(b,blen,deb_xfer);
git.openpandora.org / pandora-kernel.git / commitdiff