ath6kl: implement suspend support
authorKalle Valo <kvalo@qca.qualcomm.com>
Fri, 22 Jul 2011 05:26:20 +0000 (08:26 +0300)
committerKalle Valo <kvalo@qca.qualcomm.com>
Wed, 31 Aug 2011 07:10:54 +0000 (10:10 +0300)
For now this is implemented so that if host supports power is kept in
the chip. If that's not supported, an error is returned and sdio stack
will remove the device during suspend.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
drivers/net/wireless/ath/ath6kl/cfg80211.c
drivers/net/wireless/ath/ath6kl/core.h
drivers/net/wireless/ath/ath6kl/hif-ops.h
drivers/net/wireless/ath/ath6kl/hif.h
drivers/net/wireless/ath/ath6kl/main.c
drivers/net/wireless/ath/ath6kl/sdio.c

index b2b70e6..9128aa3 100644 (file)
@@ -17,6 +17,7 @@
 #include "core.h"
 #include "cfg80211.h"
 #include "debug.h"
+#include "hif-ops.h"
 
 #define RATETAB_ENT(_rate, _rateid, _flags) {   \
        .bitrate    = (_rate),                  \
@@ -1424,6 +1425,16 @@ static int ath6kl_flush_pmksa(struct wiphy *wiphy, struct net_device *netdev)
        return 0;
 }
 
+#ifdef CONFIG_PM
+static int ar6k_cfg80211_suspend(struct wiphy *wiphy,
+                                struct cfg80211_wowlan *wow)
+{
+       struct ath6kl *ar = wiphy_priv(wiphy);
+
+       return ath6kl_hif_suspend(ar);
+}
+#endif
+
 static struct cfg80211_ops ath6kl_cfg80211_ops = {
        .change_virtual_intf = ath6kl_cfg80211_change_iface,
        .scan = ath6kl_cfg80211_scan,
@@ -1443,6 +1454,9 @@ static struct cfg80211_ops ath6kl_cfg80211_ops = {
        .set_pmksa = ath6kl_set_pmksa,
        .del_pmksa = ath6kl_del_pmksa,
        .flush_pmksa = ath6kl_flush_pmksa,
+#ifdef CONFIG_PM
+       .suspend = ar6k_cfg80211_suspend,
+#endif
 };
 
 struct wireless_dev *ath6kl_cfg80211_init(struct device *dev)
index a1aa2ef..4405ab5 100644 (file)
@@ -544,6 +544,7 @@ void ath6kl_pspoll_event(struct ath6kl *ar, u8 aid);
 
 void ath6kl_dtimexpiry_event(struct ath6kl *ar);
 void ath6kl_disconnect(struct ath6kl *ar);
+void ath6kl_deep_sleep_enable(struct ath6kl *ar);
 void aggr_recv_delba_req_evt(struct ath6kl *ar, u8 tid);
 void aggr_recv_addba_req_evt(struct ath6kl *ar, u8 tid, u16 seq_no,
                             u8 win_sz);
index c923979..d6c898f 100644 (file)
@@ -69,4 +69,9 @@ static inline void ath6kl_hif_cleanup_scatter(struct ath6kl *ar)
        return ar->hif_ops->cleanup_scatter(ar);
 }
 
+static inline int ath6kl_hif_suspend(struct ath6kl *ar)
+{
+       return ar->hif_ops->suspend(ar);
+}
+
 #endif
index 5ceff54..797e2d1 100644 (file)
@@ -202,6 +202,7 @@ struct ath6kl_hif_ops {
        int (*scat_req_rw) (struct ath6kl *ar,
                            struct hif_scatter_req *scat_req);
        void (*cleanup_scatter)(struct ath6kl *ar);
+       int (*suspend)(struct ath6kl *ar);
 };
 
 #endif
index 868838b..b64b2a3 100644 (file)
@@ -795,6 +795,41 @@ void ath6kl_disconnect(struct ath6kl *ar)
        }
 }
 
+void ath6kl_deep_sleep_enable(struct ath6kl *ar)
+{
+       switch (ar->sme_state) {
+       case SME_CONNECTING:
+               cfg80211_connect_result(ar->net_dev, ar->bssid, NULL, 0,
+                                       NULL, 0,
+                                       WLAN_STATUS_UNSPECIFIED_FAILURE,
+                                       GFP_KERNEL);
+               break;
+       case SME_CONNECTED:
+       default:
+               /*
+                * FIXME: oddly enough smeState is in DISCONNECTED during
+                * suspend, why? Need to send disconnected event in that
+                * state.
+                */
+               cfg80211_disconnected(ar->net_dev, 0, NULL, 0, GFP_KERNEL);
+               break;
+       }
+
+       if (test_bit(CONNECTED, &ar->flag) ||
+           test_bit(CONNECT_PEND, &ar->flag))
+               ath6kl_wmi_disconnect_cmd(ar->wmi);
+
+       ar->sme_state = SME_DISCONNECTED;
+
+       /* disable scanning */
+       if (ath6kl_wmi_scanparams_cmd(ar->wmi, 0xFFFF, 0, 0, 0, 0, 0, 0, 0,
+                                     0, 0) != 0)
+               printk(KERN_WARNING "ath6kl: failed to disable scan "
+                      "during suspend\n");
+
+       ath6kl_cfg80211_scan_complete_event(ar, -ECANCELED);
+}
+
 /* WMI Event handlers */
 
 static const char *get_hw_id_string(u32 id)
index f393090..852a0cc 100644 (file)
@@ -726,6 +726,31 @@ static int ath6kl_sdio_enable_scatter(struct ath6kl *ar)
        return 0;
 }
 
+static int ath6kl_sdio_suspend(struct ath6kl *ar)
+{
+       struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
+       struct sdio_func *func = ar_sdio->func;
+       mmc_pm_flag_t flags;
+       int ret;
+
+       flags = sdio_get_host_pm_caps(func);
+
+       if (!(flags & MMC_PM_KEEP_POWER))
+               /* as host doesn't support keep power we need to bail out */
+               return -EINVAL;
+
+       ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+       if (ret) {
+               printk(KERN_ERR "ath6kl: set sdio pm flags failed: %d\n",
+                      ret);
+               return ret;
+       }
+
+       ath6kl_deep_sleep_enable(ar);
+
+       return 0;
+}
+
 static const struct ath6kl_hif_ops ath6kl_sdio_ops = {
        .read_write_sync = ath6kl_sdio_read_write_sync,
        .write_async = ath6kl_sdio_write_async,
@@ -736,6 +761,7 @@ static const struct ath6kl_hif_ops ath6kl_sdio_ops = {
        .enable_scatter = ath6kl_sdio_enable_scatter,
        .scat_req_rw = ath6kl_sdio_async_rw_scatter,
        .cleanup_scatter = ath6kl_sdio_cleanup_scatter,
+       .suspend = ath6kl_sdio_suspend,
 };
 
 static int ath6kl_sdio_probe(struct sdio_func *func,