#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
+#include "intel_dp.h"
#include "drm_crtc_helper.h"
#define INTEL_LIMIT_G4X_HDMI_DAC 5
#define INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS 6
#define INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS 7
-#define INTEL_LIMIT_IGD_SDVO_DAC 8
-#define INTEL_LIMIT_IGD_LVDS 9
-#define INTEL_LIMIT_IGDNG_SDVO_DAC 10
-#define INTEL_LIMIT_IGDNG_LVDS 11
+#define INTEL_LIMIT_G4X_DISPLAY_PORT 8
+#define INTEL_LIMIT_IGD_SDVO_DAC 9
+#define INTEL_LIMIT_IGD_LVDS 10
+#define INTEL_LIMIT_IGDNG_SDVO_DAC 11
+#define INTEL_LIMIT_IGDNG_LVDS 12
/*The parameter is for SDVO on G4x platform*/
#define G4X_DOT_SDVO_MIN 25000
#define G4X_P2_DUAL_CHANNEL_LVDS_FAST 7
#define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT 0
+/*The parameter is for DISPLAY PORT on G4x platform*/
+#define G4X_DOT_DISPLAY_PORT_MIN 161670
+#define G4X_DOT_DISPLAY_PORT_MAX 227000
+#define G4X_N_DISPLAY_PORT_MIN 1
+#define G4X_N_DISPLAY_PORT_MAX 2
+#define G4X_M_DISPLAY_PORT_MIN 97
+#define G4X_M_DISPLAY_PORT_MAX 108
+#define G4X_M1_DISPLAY_PORT_MIN 0x10
+#define G4X_M1_DISPLAY_PORT_MAX 0x12
+#define G4X_M2_DISPLAY_PORT_MIN 0x05
+#define G4X_M2_DISPLAY_PORT_MAX 0x06
+#define G4X_P_DISPLAY_PORT_MIN 10
+#define G4X_P_DISPLAY_PORT_MAX 20
+#define G4X_P1_DISPLAY_PORT_MIN 1
+#define G4X_P1_DISPLAY_PORT_MAX 2
+#define G4X_P2_DISPLAY_PORT_SLOW 10
+#define G4X_P2_DISPLAY_PORT_FAST 10
+#define G4X_P2_DISPLAY_PORT_LIMIT 0
+
/* IGDNG */
/* as we calculate clock using (register_value + 2) for
N/M1/M2, so here the range value for them is (actual_value-2).
intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock);
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *best_clock);
+
static const intel_limit_t intel_limits[] = {
{ /* INTEL_LIMIT_I8XX_DVO_DAC */
.dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX },
},
.find_pll = intel_g4x_find_best_PLL,
},
+ { /* INTEL_LIMIT_G4X_DISPLAY_PORT */
+ .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN,
+ .max = G4X_DOT_DISPLAY_PORT_MAX },
+ .vco = { .min = G4X_VCO_MIN,
+ .max = G4X_VCO_MAX},
+ .n = { .min = G4X_N_DISPLAY_PORT_MIN,
+ .max = G4X_N_DISPLAY_PORT_MAX },
+ .m = { .min = G4X_M_DISPLAY_PORT_MIN,
+ .max = G4X_M_DISPLAY_PORT_MAX },
+ .m1 = { .min = G4X_M1_DISPLAY_PORT_MIN,
+ .max = G4X_M1_DISPLAY_PORT_MAX },
+ .m2 = { .min = G4X_M2_DISPLAY_PORT_MIN,
+ .max = G4X_M2_DISPLAY_PORT_MAX },
+ .p = { .min = G4X_P_DISPLAY_PORT_MIN,
+ .max = G4X_P_DISPLAY_PORT_MAX },
+ .p1 = { .min = G4X_P1_DISPLAY_PORT_MIN,
+ .max = G4X_P1_DISPLAY_PORT_MAX},
+ .p2 = { .dot_limit = G4X_P2_DISPLAY_PORT_LIMIT,
+ .p2_slow = G4X_P2_DISPLAY_PORT_SLOW,
+ .p2_fast = G4X_P2_DISPLAY_PORT_FAST },
+ .find_pll = intel_find_pll_g4x_dp,
+ },
{ /* INTEL_LIMIT_IGD_SDVO */
.dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX},
.vco = { .min = IGD_VCO_MIN, .max = IGD_VCO_MAX },
limit = &intel_limits[INTEL_LIMIT_G4X_HDMI_DAC];
} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
limit = &intel_limits[INTEL_LIMIT_G4X_SDVO];
+ } else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+ limit = &intel_limits[INTEL_LIMIT_G4X_DISPLAY_PORT];
} else /* The option is for other outputs */
limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
return found;
}
+/* DisplayPort has only two frequencies, 162MHz and 270MHz */
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *best_clock)
+{
+ intel_clock_t clock;
+ if (target < 200000) {
+ clock.dot = 161670;
+ clock.p = 20;
+ clock.p1 = 2;
+ clock.p2 = 10;
+ clock.n = 0x01;
+ clock.m = 97;
+ clock.m1 = 0x10;
+ clock.m2 = 0x05;
+ } else {
+ clock.dot = 270000;
+ clock.p = 10;
+ clock.p1 = 1;
+ clock.p2 = 10;
+ clock.n = 0x02;
+ clock.m = 108;
+ clock.m1 = 0x12;
+ clock.m2 = 0x06;
+ }
+ memcpy(best_clock, &clock, sizeof(intel_clock_t));
+ return true;
+}
+
void
intel_wait_for_vblank(struct drm_device *dev)
{
intel_clock_t clock;
u32 dpll = 0, fp = 0, dspcntr, pipeconf;
bool ok, is_sdvo = false, is_dvo = false;
- bool is_crt = false, is_lvds = false, is_tv = false;
+ bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector;
const intel_limit_t *limit;
case INTEL_OUTPUT_ANALOG:
is_crt = true;
break;
+ case INTEL_OUTPUT_DISPLAYPORT:
+ is_dp = true;
+ break;
}
num_outputs++;
} else {
refclk = 48000;
}
+
/*
* Returns a set of divisors for the desired target clock with the given
else if (IS_IGDNG(dev))
dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
}
+ if (is_dp)
+ dpll |= DPLL_DVO_HIGH_SPEED;
/* compute bitmask from p1 value */
if (IS_IGD(dev))
I915_WRITE(lvds_reg, lvds);
I915_READ(lvds_reg);
}
+ if (is_dp)
+ intel_dp_set_m_n(crtc, mode, adjusted_mode);
I915_WRITE(fp_reg, fp);
I915_WRITE(dpll_reg, dpll);
found = intel_sdvo_init(dev, SDVOB);
if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
intel_hdmi_init(dev, SDVOB);
+ if (!found && SUPPORTS_INTEGRATED_DP(dev))
+ intel_dp_init(dev, DP_B);
}
/* Before G4X SDVOC doesn't have its own detect register */
found = intel_sdvo_init(dev, SDVOC);
if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
intel_hdmi_init(dev, SDVOC);
+ if (!found && SUPPORTS_INTEGRATED_DP(dev))
+ intel_dp_init(dev, DP_C);
}
+ if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
+ intel_dp_init(dev, DP_D);
} else
intel_dvo_init(dev);
(1 << 1));
clone_mask = (1 << INTEL_OUTPUT_TVOUT);
break;
+ case INTEL_OUTPUT_DISPLAYPORT:
+ crtc_mask = ((1 << 0) |
+ (1 << 1));
+ clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT);
+ break;
}
encoder->possible_crtcs = crtc_mask;
encoder->possible_clones = intel_connector_clones(dev, clone_mask);
--- /dev/null
+/*
+ * Copyright © 2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ * Keith Packard <keithp@keithp.com>
+ *
+ */
+
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "intel_dp.h"
+
+#define DP_LINK_STATUS_SIZE 6
+#define DP_LINK_CHECK_TIMEOUT (10 * 1000)
+
+#define DP_LINK_CONFIGURATION_SIZE 9
+
+struct intel_dp_priv {
+ uint32_t output_reg;
+ uint32_t DP;
+ uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE];
+ uint32_t save_DP;
+ uint8_t save_link_configuration[DP_LINK_CONFIGURATION_SIZE];
+ bool has_audio;
+ uint8_t link_bw;
+ uint8_t lane_count;
+ uint8_t dpcd[4];
+ struct intel_output *intel_output;
+ struct i2c_adapter adapter;
+ struct i2c_algo_dp_aux_data algo;
+};
+
+static void
+intel_dp_link_train(struct intel_output *intel_output, uint32_t DP,
+ uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]);
+
+static void
+intel_dp_link_down(struct intel_output *intel_output, uint32_t DP);
+
+static int
+intel_dp_max_lane_count(struct intel_output *intel_output)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ int max_lane_count = 4;
+
+ if (dp_priv->dpcd[0] >= 0x11) {
+ max_lane_count = dp_priv->dpcd[2] & 0x1f;
+ switch (max_lane_count) {
+ case 1: case 2: case 4:
+ break;
+ default:
+ max_lane_count = 4;
+ }
+ }
+ return max_lane_count;
+}
+
+static int
+intel_dp_max_link_bw(struct intel_output *intel_output)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ int max_link_bw = dp_priv->dpcd[1];
+
+ switch (max_link_bw) {
+ case DP_LINK_BW_1_62:
+ case DP_LINK_BW_2_7:
+ break;
+ default:
+ max_link_bw = DP_LINK_BW_1_62;
+ break;
+ }
+ return max_link_bw;
+}
+
+static int
+intel_dp_link_clock(uint8_t link_bw)
+{
+ if (link_bw == DP_LINK_BW_2_7)
+ return 270000;
+ else
+ return 162000;
+}
+
+/* I think this is a fiction */
+static int
+intel_dp_link_required(int pixel_clock)
+{
+ return pixel_clock * 3;
+}
+
+static int
+intel_dp_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output));
+ int max_lanes = intel_dp_max_lane_count(intel_output);
+
+ if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes)
+ return MODE_CLOCK_HIGH;
+
+ if (mode->clock < 10000)
+ return MODE_CLOCK_LOW;
+
+ return MODE_OK;
+}
+
+static uint32_t
+pack_aux(uint8_t *src, int src_bytes)
+{
+ int i;
+ uint32_t v = 0;
+
+ if (src_bytes > 4)
+ src_bytes = 4;
+ for (i = 0; i < src_bytes; i++)
+ v |= ((uint32_t) src[i]) << ((3-i) * 8);
+ return v;
+}
+
+static void
+unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes)
+{
+ int i;
+ if (dst_bytes > 4)
+ dst_bytes = 4;
+ for (i = 0; i < dst_bytes; i++)
+ dst[i] = src >> ((3-i) * 8);
+}
+
+static int
+intel_dp_aux_ch(struct intel_output *intel_output,
+ uint8_t *send, int send_bytes,
+ uint8_t *recv, int recv_size)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ uint32_t output_reg = dp_priv->output_reg;
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t ch_ctl = output_reg + 0x10;
+ uint32_t ch_data = ch_ctl + 4;
+ int i;
+ int recv_bytes;
+ uint32_t ctl;
+ uint32_t status;
+
+ /* Load the send data into the aux channel data registers */
+ for (i = 0; i < send_bytes; i += 4) {
+ uint32_t d = pack_aux(send + i, send_bytes - i);;
+
+ I915_WRITE(ch_data + i, d);
+ }
+
+ /* The clock divider is based off the hrawclk,
+ * and would like to run at 2MHz. The 133 below assumes
+ * a 266MHz hrawclk; need to figure out how we're supposed
+ * to know what hrawclk is...
+ */
+ ctl = (DP_AUX_CH_CTL_SEND_BUSY |
+ DP_AUX_CH_CTL_TIME_OUT_1600us |
+ (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
+ (5 << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
+ (133 << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) |
+ DP_AUX_CH_CTL_TIME_OUT_ERROR |
+ DP_AUX_CH_CTL_RECEIVE_ERROR);
+
+ /* Send the command and wait for it to complete */
+ I915_WRITE(ch_ctl, ctl);
+ (void) I915_READ(ch_ctl);
+ for (;;) {
+ udelay(100);
+ status = I915_READ(ch_ctl);
+ if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+ break;
+ }
+
+ /* Clear done status and any errors */
+ I915_WRITE(ch_ctl, (ctl |
+ DP_AUX_CH_CTL_DONE |
+ DP_AUX_CH_CTL_TIME_OUT_ERROR |
+ DP_AUX_CH_CTL_RECEIVE_ERROR));
+ (void) I915_READ(ch_ctl);
+
+ if ((status & DP_AUX_CH_CTL_DONE) == 0) {
+ printk(KERN_ERR "dp_aux_ch not done status 0x%08x\n", status);
+ return -1;
+ }
+
+ /* Check for timeout or receive error.
+ * Timeouts occur when the sink is not connected
+ */
+ if (status & (DP_AUX_CH_CTL_TIME_OUT_ERROR | DP_AUX_CH_CTL_RECEIVE_ERROR)) {
+ printk(KERN_ERR "dp_aux_ch error status 0x%08x\n", status);
+ return -1;
+ }
+
+ /* Unload any bytes sent back from the other side */
+ recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >>
+ DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
+
+ if (recv_bytes > recv_size)
+ recv_bytes = recv_size;
+
+ for (i = 0; i < recv_bytes; i += 4) {
+ uint32_t d = I915_READ(ch_data + i);
+
+ unpack_aux(d, recv + i, recv_bytes - i);
+ }
+
+ return recv_bytes;
+}
+
+/* Write data to the aux channel in native mode */
+static int
+intel_dp_aux_native_write(struct intel_output *intel_output,
+ uint16_t address, uint8_t *send, int send_bytes)
+{
+ int ret;
+ uint8_t msg[20];
+ int msg_bytes;
+ uint8_t ack;
+
+ if (send_bytes > 16)
+ return -1;
+ msg[0] = AUX_NATIVE_WRITE << 4;
+ msg[1] = address >> 8;
+ msg[2] = address;
+ msg[3] = send_bytes - 1;
+ memcpy(&msg[4], send, send_bytes);
+ msg_bytes = send_bytes + 4;
+ for (;;) {
+ ret = intel_dp_aux_ch(intel_output, msg, msg_bytes, &ack, 1);
+ if (ret < 0)
+ return ret;
+ if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
+ break;
+ else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+ udelay(100);
+ else
+ return -1;
+ }
+ return send_bytes;
+}
+
+/* Write a single byte to the aux channel in native mode */
+static int
+intel_dp_aux_native_write_1(struct intel_output *intel_output,
+ uint16_t address, uint8_t byte)
+{
+ return intel_dp_aux_native_write(intel_output, address, &byte, 1);
+}
+
+/* read bytes from a native aux channel */
+static int
+intel_dp_aux_native_read(struct intel_output *intel_output,
+ uint16_t address, uint8_t *recv, int recv_bytes)
+{
+ uint8_t msg[4];
+ int msg_bytes;
+ uint8_t reply[20];
+ int reply_bytes;
+ uint8_t ack;
+ int ret;
+
+ msg[0] = AUX_NATIVE_READ << 4;
+ msg[1] = address >> 8;
+ msg[2] = address & 0xff;
+ msg[3] = recv_bytes - 1;
+
+ msg_bytes = 4;
+ reply_bytes = recv_bytes + 1;
+
+ for (;;) {
+ ret = intel_dp_aux_ch(intel_output, msg, msg_bytes,
+ reply, reply_bytes);
+ if (ret <= 0)
+ return ret;
+ ack = reply[0];
+ if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) {
+ memcpy(recv, reply + 1, ret - 1);
+ return ret - 1;
+ }
+ else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+ udelay(100);
+ else
+ return -1;
+ }
+}
+
+static int
+intel_dp_i2c_aux_ch(struct i2c_adapter *adapter,
+ uint8_t *send, int send_bytes,
+ uint8_t *recv, int recv_bytes)
+{
+ struct intel_dp_priv *dp_priv = container_of(adapter,
+ struct intel_dp_priv,
+ adapter);
+ struct intel_output *intel_output = dp_priv->intel_output;
+
+ return intel_dp_aux_ch(intel_output,
+ send, send_bytes, recv, recv_bytes);
+}
+
+static int
+intel_dp_i2c_init(struct intel_output *intel_output, const char *name)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ DRM_ERROR("i2c_init %s\n", name);
+ dp_priv->algo.running = false;
+ dp_priv->algo.address = 0;
+ dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch;
+
+ memset(&dp_priv->adapter, '\0', sizeof (dp_priv->adapter));
+ dp_priv->adapter.owner = THIS_MODULE;
+ dp_priv->adapter.class = I2C_CLASS_DDC;
+ strncpy (dp_priv->adapter.name, name, sizeof dp_priv->adapter.name - 1);
+ dp_priv->adapter.name[sizeof dp_priv->adapter.name - 1] = '\0';
+ dp_priv->adapter.algo_data = &dp_priv->algo;
+ dp_priv->adapter.dev.parent = &intel_output->base.kdev;
+
+ return i2c_dp_aux_add_bus(&dp_priv->adapter);
+}
+
+static bool
+intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ int lane_count, clock;
+ int max_lane_count = intel_dp_max_lane_count(intel_output);
+ int max_clock = intel_dp_max_link_bw(intel_output) == DP_LINK_BW_2_7 ? 1 : 0;
+ static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
+
+ for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
+ for (clock = 0; clock <= max_clock; clock++) {
+ int link_avail = intel_dp_link_clock(bws[clock]) * lane_count;
+
+ if (intel_dp_link_required(mode->clock) <= link_avail) {
+ dp_priv->link_bw = bws[clock];
+ dp_priv->lane_count = lane_count;
+ adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
+ printk(KERN_ERR "link bw %02x lane count %d clock %d\n",
+ dp_priv->link_bw, dp_priv->lane_count,
+ adjusted_mode->clock);
+ return true;
+ }
+ }
+ }
+ return false;
+}
+
+struct intel_dp_m_n {
+ uint32_t tu;
+ uint32_t gmch_m;
+ uint32_t gmch_n;
+ uint32_t link_m;
+ uint32_t link_n;
+};
+
+static void
+intel_reduce_ratio(uint32_t *num, uint32_t *den)
+{
+ while (*num > 0xffffff || *den > 0xffffff) {
+ *num >>= 1;
+ *den >>= 1;
+ }
+}
+
+static void
+intel_dp_compute_m_n(int bytes_per_pixel,
+ int nlanes,
+ int pixel_clock,
+ int link_clock,
+ struct intel_dp_m_n *m_n)
+{
+ m_n->tu = 64;
+ m_n->gmch_m = pixel_clock * bytes_per_pixel;
+ m_n->gmch_n = link_clock * nlanes;
+ intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
+ m_n->link_m = pixel_clock;
+ m_n->link_n = link_clock;
+ intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
+}
+
+void
+intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *connector;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int lane_count = 4;
+ struct intel_dp_m_n m_n;
+
+ /*
+ * Find the lane count in the intel_output private
+ */
+ list_for_each_entry(connector, &mode_config->connector_list, head) {
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ if (!connector->encoder || connector->encoder->crtc != crtc)
+ continue;
+
+ if (intel_output->type == INTEL_OUTPUT_DISPLAYPORT) {
+ lane_count = dp_priv->lane_count;
+ break;
+ }
+ }
+
+ /*
+ * Compute the GMCH and Link ratios. The '3' here is
+ * the number of bytes_per_pixel post-LUT, which we always
+ * set up for 8-bits of R/G/B, or 3 bytes total.
+ */
+ intel_dp_compute_m_n(3, lane_count,
+ mode->clock, adjusted_mode->clock, &m_n);
+
+ if (intel_crtc->pipe == 0) {
+ I915_WRITE(PIPEA_GMCH_DATA_M,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(PIPEA_GMCH_DATA_N,
+ m_n.gmch_n);
+ I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m);
+ I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n);
+ } else {
+ I915_WRITE(PIPEB_GMCH_DATA_M,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(PIPEB_GMCH_DATA_N,
+ m_n.gmch_n);
+ I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m);
+ I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n);
+ }
+}
+
+static void
+intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct drm_crtc *crtc = intel_output->enc.crtc;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+ dp_priv->DP = (DP_LINK_TRAIN_OFF |
+ DP_VOLTAGE_0_4 |
+ DP_PRE_EMPHASIS_0 |
+ DP_SYNC_VS_HIGH |
+ DP_SYNC_HS_HIGH);
+
+ switch (dp_priv->lane_count) {
+ case 1:
+ dp_priv->DP |= DP_PORT_WIDTH_1;
+ break;
+ case 2:
+ dp_priv->DP |= DP_PORT_WIDTH_2;
+ break;
+ case 4:
+ dp_priv->DP |= DP_PORT_WIDTH_4;
+ break;
+ }
+ if (dp_priv->has_audio)
+ dp_priv->DP |= DP_AUDIO_OUTPUT_ENABLE;
+
+ memset(dp_priv->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
+ dp_priv->link_configuration[0] = dp_priv->link_bw;
+ dp_priv->link_configuration[1] = dp_priv->lane_count;
+
+ /*
+ * Check for DPCD version > 1.1,
+ * enable enahanced frame stuff in that case
+ */
+ if (dp_priv->dpcd[0] >= 0x11) {
+ dp_priv->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+ dp_priv->DP |= DP_ENHANCED_FRAMING;
+ }
+
+ if (intel_crtc->pipe == 1)
+ dp_priv->DP |= DP_PIPEB_SELECT;
+}
+
+
+static void
+intel_dp_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dp_reg = I915_READ(dp_priv->output_reg);
+
+ if (mode != DRM_MODE_DPMS_ON) {
+ if (dp_reg & DP_PORT_EN)
+ intel_dp_link_down(intel_output, dp_priv->DP);
+ } else {
+ if (!(dp_reg & DP_PORT_EN))
+ intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
+ }
+}
+
+/*
+ * Fetch AUX CH registers 0x202 - 0x207 which contain
+ * link status information
+ */
+static bool
+intel_dp_get_link_status(struct intel_output *intel_output,
+ uint8_t link_status[DP_LINK_STATUS_SIZE])
+{
+ int ret;
+
+ ret = intel_dp_aux_native_read(intel_output,
+ DP_LANE0_1_STATUS,
+ link_status, DP_LINK_STATUS_SIZE);
+ if (ret != DP_LINK_STATUS_SIZE)
+ return false;
+ return true;
+}
+
+static uint8_t
+intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int r)
+{
+ return link_status[r - DP_LANE0_1_STATUS];
+}
+
+static void
+intel_dp_save(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ dp_priv->save_DP = I915_READ(dp_priv->output_reg);
+ intel_dp_aux_native_read(intel_output, DP_LINK_BW_SET,
+ dp_priv->save_link_configuration,
+ sizeof (dp_priv->save_link_configuration));
+}
+
+static uint8_t
+intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int lane)
+{
+ int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+ int s = ((lane & 1) ?
+ DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
+ DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
+ uint8_t l = intel_dp_link_status(link_status, i);
+
+ return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
+}
+
+static uint8_t
+intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int lane)
+{
+ int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+ int s = ((lane & 1) ?
+ DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
+ DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
+ uint8_t l = intel_dp_link_status(link_status, i);
+
+ return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
+}
+
+
+#if 0
+static char *voltage_names[] = {
+ "0.4V", "0.6V", "0.8V", "1.2V"
+};
+static char *pre_emph_names[] = {
+ "0dB", "3.5dB", "6dB", "9.5dB"
+};
+static char *link_train_names[] = {
+ "pattern 1", "pattern 2", "idle", "off"
+};
+#endif
+
+/*
+ * These are source-specific values; current Intel hardware supports
+ * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB
+ */
+#define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800
+
+static uint8_t
+intel_dp_pre_emphasis_max(uint8_t voltage_swing)
+{
+ switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
+ case DP_TRAIN_VOLTAGE_SWING_400:
+ return DP_TRAIN_PRE_EMPHASIS_6;
+ case DP_TRAIN_VOLTAGE_SWING_600:
+ return DP_TRAIN_PRE_EMPHASIS_6;
+ case DP_TRAIN_VOLTAGE_SWING_800:
+ return DP_TRAIN_PRE_EMPHASIS_3_5;
+ case DP_TRAIN_VOLTAGE_SWING_1200:
+ default:
+ return DP_TRAIN_PRE_EMPHASIS_0;
+ }
+}
+
+static void
+intel_get_adjust_train(struct intel_output *intel_output,
+ uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int lane_count,
+ uint8_t train_set[4])
+{
+ uint8_t v = 0;
+ uint8_t p = 0;
+ int lane;
+
+ for (lane = 0; lane < lane_count; lane++) {
+ uint8_t this_v = intel_get_adjust_request_voltage(link_status, lane);
+ uint8_t this_p = intel_get_adjust_request_pre_emphasis(link_status, lane);
+
+ if (this_v > v)
+ v = this_v;
+ if (this_p > p)
+ p = this_p;
+ }
+
+ if (v >= I830_DP_VOLTAGE_MAX)
+ v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED;
+
+ if (p >= intel_dp_pre_emphasis_max(v))
+ p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+
+ for (lane = 0; lane < 4; lane++)
+ train_set[lane] = v | p;
+}
+
+static uint32_t
+intel_dp_signal_levels(uint8_t train_set, int lane_count)
+{
+ uint32_t signal_levels = 0;
+
+ switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
+ case DP_TRAIN_VOLTAGE_SWING_400:
+ default:
+ signal_levels |= DP_VOLTAGE_0_4;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_600:
+ signal_levels |= DP_VOLTAGE_0_6;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_800:
+ signal_levels |= DP_VOLTAGE_0_8;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_1200:
+ signal_levels |= DP_VOLTAGE_1_2;
+ break;
+ }
+ switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
+ case DP_TRAIN_PRE_EMPHASIS_0:
+ default:
+ signal_levels |= DP_PRE_EMPHASIS_0;
+ break;
+ case DP_TRAIN_PRE_EMPHASIS_3_5:
+ signal_levels |= DP_PRE_EMPHASIS_3_5;
+ break;
+ case DP_TRAIN_PRE_EMPHASIS_6:
+ signal_levels |= DP_PRE_EMPHASIS_6;
+ break;
+ case DP_TRAIN_PRE_EMPHASIS_9_5:
+ signal_levels |= DP_PRE_EMPHASIS_9_5;
+ break;
+ }
+ return signal_levels;
+}
+
+static uint8_t
+intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int lane)
+{
+ int i = DP_LANE0_1_STATUS + (lane >> 1);
+ int s = (lane & 1) * 4;
+ uint8_t l = intel_dp_link_status(link_status, i);
+
+ return (l >> s) & 0xf;
+}
+
+/* Check for clock recovery is done on all channels */
+static bool
+intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
+{
+ int lane;
+ uint8_t lane_status;
+
+ for (lane = 0; lane < lane_count; lane++) {
+ lane_status = intel_get_lane_status(link_status, lane);
+ if ((lane_status & DP_LANE_CR_DONE) == 0)
+ return false;
+ }
+ return true;
+}
+
+/* Check to see if channel eq is done on all channels */
+#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\
+ DP_LANE_CHANNEL_EQ_DONE|\
+ DP_LANE_SYMBOL_LOCKED)
+static bool
+intel_channel_eq_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
+{
+ uint8_t lane_align;
+ uint8_t lane_status;
+ int lane;
+
+ lane_align = intel_dp_link_status(link_status,
+ DP_LANE_ALIGN_STATUS_UPDATED);
+ if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0)
+ return false;
+ for (lane = 0; lane < lane_count; lane++) {
+ lane_status = intel_get_lane_status(link_status, lane);
+ if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS)
+ return false;
+ }
+ return true;
+}
+
+static bool
+intel_dp_set_link_train(struct intel_output *intel_output,
+ uint32_t dp_reg_value,
+ uint8_t dp_train_pat,
+ uint8_t train_set[4],
+ bool first)
+{
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ int ret;
+
+ I915_WRITE(dp_priv->output_reg, dp_reg_value);
+ POSTING_READ(dp_priv->output_reg);
+ if (first)
+ intel_wait_for_vblank(dev);
+
+ intel_dp_aux_native_write_1(intel_output,
+ DP_TRAINING_PATTERN_SET,
+ dp_train_pat);
+
+ ret = intel_dp_aux_native_write(intel_output,
+ DP_TRAINING_LANE0_SET, train_set, 4);
+ if (ret != 4)
+ return false;
+
+ return true;
+}
+
+static void
+intel_dp_link_train(struct intel_output *intel_output, uint32_t DP,
+ uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE])
+{
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ uint8_t train_set[4];
+ uint8_t link_status[DP_LINK_STATUS_SIZE];
+ int i;
+ uint8_t voltage;
+ bool clock_recovery = false;
+ bool channel_eq = false;
+ bool first = true;
+ int tries;
+
+ /* Write the link configuration data */
+ intel_dp_aux_native_write(intel_output, 0x100,
+ link_configuration, DP_LINK_CONFIGURATION_SIZE);
+
+ DP |= DP_PORT_EN;
+ DP &= ~DP_LINK_TRAIN_MASK;
+ memset(train_set, 0, 4);
+ voltage = 0xff;
+ tries = 0;
+ clock_recovery = false;
+ for (;;) {
+ /* Use train_set[0] to set the voltage and pre emphasis values */
+ uint32_t signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count);
+ DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
+
+ if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_1,
+ DP_TRAINING_PATTERN_1, train_set, first))
+ break;
+ first = false;
+ /* Set training pattern 1 */
+
+ udelay(100);
+ if (!intel_dp_get_link_status(intel_output, link_status))
+ break;
+
+ if (intel_clock_recovery_ok(link_status, dp_priv->lane_count)) {
+ clock_recovery = true;
+ break;
+ }
+
+ /* Check to see if we've tried the max voltage */
+ for (i = 0; i < dp_priv->lane_count; i++)
+ if ((train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
+ break;
+ if (i == dp_priv->lane_count)
+ break;
+
+ /* Check to see if we've tried the same voltage 5 times */
+ if ((train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
+ ++tries;
+ if (tries == 5)
+ break;
+ } else
+ tries = 0;
+ voltage = train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+
+ /* Compute new train_set as requested by target */
+ intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set);
+ }
+
+ /* channel equalization */
+ tries = 0;
+ channel_eq = false;
+ for (;;) {
+ /* Use train_set[0] to set the voltage and pre emphasis values */
+ uint32_t signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count);
+ DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
+
+ /* channel eq pattern */
+ if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_2,
+ DP_TRAINING_PATTERN_2, train_set,
+ false))
+ break;
+
+ udelay(400);
+ if (!intel_dp_get_link_status(intel_output, link_status))
+ break;
+
+ if (intel_channel_eq_ok(link_status, dp_priv->lane_count)) {
+ channel_eq = true;
+ break;
+ }
+
+ /* Try 5 times */
+ if (tries > 5)
+ break;
+
+ /* Compute new train_set as requested by target */
+ intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set);
+ ++tries;
+ }
+
+ I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_OFF);
+ POSTING_READ(dp_priv->output_reg);
+ intel_dp_aux_native_write_1(intel_output,
+ DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE);
+}
+
+static void
+intel_dp_link_down(struct intel_output *intel_output, uint32_t DP)
+{
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ I915_WRITE(dp_priv->output_reg, DP & ~DP_PORT_EN);
+ POSTING_READ(dp_priv->output_reg);
+}
+
+static void
+intel_dp_restore(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ if (dp_priv->save_DP & DP_PORT_EN)
+ intel_dp_link_train(intel_output, dp_priv->save_DP, dp_priv->save_link_configuration);
+ else
+ intel_dp_link_down(intel_output, dp_priv->save_DP);
+}
+
+#if 0
+/*
+ * According to DP spec
+ * 5.1.2:
+ * 1. Read DPCD
+ * 2. Configure link according to Receiver Capabilities
+ * 3. Use Link Training from 2.5.3.3 and 3.5.1.3
+ * 4. Check link status on receipt of hot-plug interrupt
+ */
+
+static void
+intel_dp_check_link_status(struct intel_output *intel_output)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ uint8_t link_status[DP_LINK_STATUS_SIZE];
+
+ if (!intel_output->enc.crtc)
+ return;
+
+ if (!intel_dp_get_link_status(intel_output, link_status)) {
+ intel_dp_link_down(intel_output, dp_priv->DP);
+ return;
+ }
+
+ if (!intel_channel_eq_ok(link_status, dp_priv->lane_count))
+ intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
+}
+#endif
+
+/**
+ * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
+ *
+ * \return true if DP port is connected.
+ * \return false if DP port is disconnected.
+ */
+static enum drm_connector_status
+intel_dp_detect(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ uint32_t temp, bit;
+ enum drm_connector_status status;
+
+ dp_priv->has_audio = false;
+
+ temp = I915_READ(PORT_HOTPLUG_EN);
+
+ I915_WRITE(PORT_HOTPLUG_EN,
+ temp |
+ DPB_HOTPLUG_INT_EN |
+ DPC_HOTPLUG_INT_EN |
+ DPD_HOTPLUG_INT_EN);
+
+ POSTING_READ(PORT_HOTPLUG_EN);
+
+ switch (dp_priv->output_reg) {
+ case DP_B:
+ bit = DPB_HOTPLUG_INT_STATUS;
+ break;
+ case DP_C:
+ bit = DPC_HOTPLUG_INT_STATUS;
+ break;
+ case DP_D:
+ bit = DPD_HOTPLUG_INT_STATUS;
+ break;
+ default:
+ return connector_status_unknown;
+ }
+
+ temp = I915_READ(PORT_HOTPLUG_STAT);
+
+ if ((temp & bit) == 0)
+ return connector_status_disconnected;
+
+ status = connector_status_disconnected;
+ if (intel_dp_aux_native_read(intel_output,
+ 0x000, dp_priv->dpcd,
+ sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd))
+ {
+ if (dp_priv->dpcd[0] != 0)
+ status = connector_status_connected;
+ }
+ return status;
+}
+
+static int intel_dp_get_modes(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+
+ /* We should parse the EDID data and find out if it has an audio sink
+ */
+
+ return intel_ddc_get_modes(intel_output);
+}
+
+static void
+intel_dp_destroy (struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+
+ if (intel_output->i2c_bus)
+ intel_i2c_destroy(intel_output->i2c_bus);
+ drm_sysfs_connector_remove(connector);
+ drm_connector_cleanup(connector);
+ kfree(intel_output);
+}
+
+static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
+ .dpms = intel_dp_dpms,
+ .mode_fixup = intel_dp_mode_fixup,
+ .prepare = intel_encoder_prepare,
+ .mode_set = intel_dp_mode_set,
+ .commit = intel_encoder_commit,
+};
+
+static const struct drm_connector_funcs intel_dp_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
+ .save = intel_dp_save,
+ .restore = intel_dp_restore,
+ .detect = intel_dp_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .destroy = intel_dp_destroy,
+};
+
+static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = {
+ .get_modes = intel_dp_get_modes,
+ .mode_valid = intel_dp_mode_valid,
+ .best_encoder = intel_best_encoder,
+};
+
+static void intel_dp_enc_destroy(struct drm_encoder *encoder)
+{
+ drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs intel_dp_enc_funcs = {
+ .destroy = intel_dp_enc_destroy,
+};
+
+void
+intel_dp_init(struct drm_device *dev, int output_reg)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_connector *connector;
+ struct intel_output *intel_output;
+ struct intel_dp_priv *dp_priv;
+
+ intel_output = kcalloc(sizeof(struct intel_output) +
+ sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
+ if (!intel_output)
+ return;
+
+ dp_priv = (struct intel_dp_priv *)(intel_output + 1);
+
+ connector = &intel_output->base;
+ drm_connector_init(dev, connector, &intel_dp_connector_funcs,
+ DRM_MODE_CONNECTOR_DisplayPort);
+ drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
+
+ intel_output->type = INTEL_OUTPUT_DISPLAYPORT;
+
+ connector->interlace_allowed = true;
+ connector->doublescan_allowed = 0;
+
+ dp_priv->intel_output = intel_output;
+ dp_priv->output_reg = output_reg;
+ dp_priv->has_audio = false;
+ intel_output->dev_priv = dp_priv;
+
+ drm_encoder_init(dev, &intel_output->enc, &intel_dp_enc_funcs,
+ DRM_MODE_ENCODER_TMDS);
+ drm_encoder_helper_add(&intel_output->enc, &intel_dp_helper_funcs);
+
+ drm_mode_connector_attach_encoder(&intel_output->base,
+ &intel_output->enc);
+ drm_sysfs_connector_add(connector);
+
+ /* Set up the DDC bus. */
+ intel_dp_i2c_init(intel_output,
+ (output_reg == DP_B) ? "DPDDC-B" :
+ (output_reg == DP_C) ? "DPDDC-C" : "DPDDC-D");
+ intel_output->ddc_bus = &dp_priv->adapter;
+
+ /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
+ * 0xd. Failure to do so will result in spurious interrupts being
+ * generated on the port when a cable is not attached.
+ */
+ if (IS_G4X(dev) && !IS_GM45(dev)) {
+ u32 temp = I915_READ(PEG_BAND_GAP_DATA);
+ I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
+ }
+}
--- /dev/null
+/*
+ * Copyright © 2009 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. The copyright holders make no representations
+ * about the suitability of this software for any purpose. It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include "intel_dp.h"
+
+/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */
+
+#define MODE_I2C_START 1
+#define MODE_I2C_WRITE 2
+#define MODE_I2C_READ 4
+#define MODE_I2C_STOP 8
+
+static int
+i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode,
+ uint8_t write_byte, uint8_t *read_byte)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ uint16_t address = algo_data->address;
+ uint8_t msg[5];
+ uint8_t reply[2];
+ int msg_bytes;
+ int reply_bytes;
+ int ret;
+
+ /* Set up the command byte */
+ if (mode & MODE_I2C_READ)
+ msg[0] = AUX_I2C_READ << 4;
+ else
+ msg[0] = AUX_I2C_WRITE << 4;
+
+ if (!(mode & MODE_I2C_STOP))
+ msg[0] |= AUX_I2C_MOT << 4;
+
+ msg[1] = address >> 8;
+ msg[2] = address;
+
+ switch (mode) {
+ case MODE_I2C_WRITE:
+ msg[3] = 0;
+ msg[4] = write_byte;
+ msg_bytes = 5;
+ reply_bytes = 1;
+ break;
+ case MODE_I2C_READ:
+ msg[3] = 0;
+ msg_bytes = 4;
+ reply_bytes = 2;
+ break;
+ default:
+ msg_bytes = 3;
+ reply_bytes = 1;
+ break;
+ }
+
+ for (;;) {
+ ret = (*algo_data->aux_ch)(adapter,
+ msg, msg_bytes,
+ reply, reply_bytes);
+ if (ret < 0) {
+ printk(KERN_ERR "aux_ch failed %d\n", ret);
+ return ret;
+ }
+ switch (reply[0] & AUX_I2C_REPLY_MASK) {
+ case AUX_I2C_REPLY_ACK:
+ if (mode == MODE_I2C_READ) {
+ *read_byte = reply[1];
+ }
+ return reply_bytes - 1;
+ case AUX_I2C_REPLY_NACK:
+ printk(KERN_ERR "aux_ch nack\n");
+ return -EREMOTEIO;
+ case AUX_I2C_REPLY_DEFER:
+ printk(KERN_ERR "aux_ch defer\n");
+ udelay(100);
+ break;
+ default:
+ printk(KERN_ERR "aux_ch invalid reply 0x%02x\n", reply[0]);
+ return -EREMOTEIO;
+ }
+ }
+}
+
+/*
+ * I2C over AUX CH
+ */
+
+/*
+ * Send the address. If the I2C link is running, this 'restarts'
+ * the connection with the new address, this is used for doing
+ * a write followed by a read (as needed for DDC)
+ */
+static int
+i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int mode = MODE_I2C_START;
+ int ret;
+
+ if (reading)
+ mode |= MODE_I2C_READ;
+ else
+ mode |= MODE_I2C_WRITE;
+ algo_data->address = address;
+ algo_data->running = true;
+ ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+ return ret;
+}
+
+/*
+ * Stop the I2C transaction. This closes out the link, sending
+ * a bare address packet with the MOT bit turned off
+ */
+static void
+i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int mode = MODE_I2C_STOP;
+
+ if (reading)
+ mode |= MODE_I2C_READ;
+ else
+ mode |= MODE_I2C_WRITE;
+ if (algo_data->running) {
+ (void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+ algo_data->running = false;
+ }
+}
+
+/*
+ * Write a single byte to the current I2C address, the
+ * the I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int ret;
+
+ if (!algo_data->running)
+ return -EIO;
+
+ ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL);
+ return ret;
+}
+
+/*
+ * Read a single byte from the current I2C address, the
+ * I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int ret;
+
+ if (!algo_data->running)
+ return -EIO;
+
+ ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret);
+ return ret;
+}
+
+static int
+i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg *msgs,
+ int num)
+{
+ int ret = 0;
+ bool reading = false;
+ int m;
+ int b;
+
+ for (m = 0; m < num; m++) {
+ u16 len = msgs[m].len;
+ u8 *buf = msgs[m].buf;
+ reading = (msgs[m].flags & I2C_M_RD) != 0;
+ ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading);
+ if (ret < 0)
+ break;
+ if (reading) {
+ for (b = 0; b < len; b++) {
+ ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]);
+ if (ret < 0)
+ break;
+ }
+ } else {
+ for (b = 0; b < len; b++) {
+ ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]);
+ if (ret < 0)
+ break;
+ }
+ }
+ if (ret < 0)
+ break;
+ }
+ if (ret >= 0)
+ ret = num;
+ i2c_algo_dp_aux_stop(adapter, reading);
+ printk(KERN_ERR "dp_aux_xfer return %d\n", ret);
+ return ret;
+}
+
+static u32
+i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA |
+ I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+ I2C_FUNC_10BIT_ADDR;
+}
+
+static const struct i2c_algorithm i2c_dp_aux_algo = {
+ .master_xfer = i2c_algo_dp_aux_xfer,
+ .functionality = i2c_algo_dp_aux_functionality,
+};
+
+static void
+i2c_dp_aux_reset_bus(struct i2c_adapter *adapter)
+{
+ (void) i2c_algo_dp_aux_address(adapter, 0, false);
+ (void) i2c_algo_dp_aux_stop(adapter, false);
+
+}
+
+static int
+i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter)
+{
+ adapter->algo = &i2c_dp_aux_algo;
+ adapter->retries = 3;
+ i2c_dp_aux_reset_bus(adapter);
+ return 0;
+}
+
+int
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter)
+{
+ int error;
+
+ error = i2c_dp_aux_prepare_bus(adapter);
+ if (error)
+ return error;
+ error = i2c_add_adapter(adapter);
+ return error;
+}
+EXPORT_SYMBOL(i2c_dp_aux_add_bus);
git.openpandora.org / pandora-kernel.git / commitdiff