* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf_counter: Fix typo in read() output generation
perf tools: Check perf.data owner
(*) Security (currently only AFS kaserver and KerberosIV tickets).
- (*) File reading.
+ (*) File reading and writing.
(*) Automounting.
-It does not yet support the following AFS features:
-
- (*) Write support.
+ (*) Local caching (via fscache).
- (*) Local caching.
+It does not yet support the following AFS features:
(*) pioctl() system call.
the masks in the following files:
/sys/module/af_rxrpc/parameters/debug
- /sys/module/afs/parameters/debug
+ /sys/module/kafs/parameters/debug
=====
When inserting the driver modules the root cell must be specified along with a
list of volume location server IP addresses:
- insmod af_rxrpc.o
- insmod rxkad.o
- insmod kafs.o rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91
+ modprobe af_rxrpc
+ modprobe rxkad
+ modprobe kafs rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91
The first module is the AF_RXRPC network protocol driver. This provides the
RxRPC remote operation protocol and may also be accessed from userspace. See:
Once the module has been loaded, more modules can be added by the following
procedure:
- echo add grand.central.org 18.7.14.88:128.2.191.224 >/proc/fs/afs/cells
+ echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 >/proc/fs/afs/cells
Where the parameters to the "add" command are the name of a cell and a list of
volume location servers within that cell, with the latter separated by colons.
specify connection to only volumes of those types.
The name of the cell is optional, and if not given during a mount, then the
-named volume will be looked up in the cell specified during insmod.
+named volume will be looked up in the cell specified during modprobe.
Additional cells can be added through /proc (see later section).
The filesystem maintains an internal database of all the cells it knows and the
IP addresses of the volume location servers for those cells. The cell to which
-the system belongs is added to the database when insmod is performed by the
+the system belongs is added to the database when modprobe is performed by the
"rootcell=" argument or, if compiled in, using a "kafs.rootcell=" argument on
the kernel command line.
Further cells can be added by commands similar to the following:
echo add CELLNAME VLADDR[:VLADDR][:VLADDR]... >/proc/fs/afs/cells
- echo add grand.central.org 18.7.14.88:128.2.191.224 >/proc/fs/afs/cells
+ echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 >/proc/fs/afs/cells
No other cell database operations are available at this time.
mount -t afs \%root.afs. /afs
mount -t afs \%cambridge.redhat.com:root.cell. /afs/cambridge.redhat.com/
-echo add grand.central.org 18.7.14.88:128.2.191.224 > /proc/fs/afs/cells
+echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 > /proc/fs/afs/cells
mount -t afs "#grand.central.org:root.cell." /afs/grand.central.org/
mount -t afs "#grand.central.org:root.archive." /afs/grand.central.org/archive
mount -t afs "#grand.central.org:root.contrib." /afs/grand.central.org/contrib
3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score
------------------------------------------------------
-This file can be used to adjust the score used to select which processes should
-be killed in an out-of-memory situation. The oom_adj value is a characteristic
-of the task's mm, so all threads that share an mm with pid will have the same
-oom_adj value. A high value will increase the likelihood of this process being
-killed by the oom-killer. Valid values are in the range -16 to +15 as
-explained below and a special value of -17, which disables oom-killing
-altogether for threads sharing pid's mm.
+This file can be used to adjust the score used to select which processes
+should be killed in an out-of-memory situation. Giving it a high score will
+increase the likelihood of this process being killed by the oom-killer. Valid
+values are in the range -16 to +15, plus the special value -17, which disables
+oom-killing altogether for this process.
The process to be killed in an out-of-memory situation is selected among all others
based on its badness score. This value equals the original memory size of the process
are the prime candidates to be killed. Having only one 'hungry' child will make
parent less preferable than the child.
-/proc/<pid>/oom_adj cannot be changed for kthreads since they are immune from
-oom-killing already.
-
/proc/<pid>/oom_score shows process' current badness score.
The following heuristics are then applied:
0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800]
- 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
+ 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036]
3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208]
4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201]
152 -> Asus Tiger Rev:1.00 [1043:4857]
153 -> Kworld Plus TV Analog Lite PCI [17de:7128]
154 -> Avermedia AVerTV GO 007 FM Plus [1461:f31d]
-155 -> Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid [0070:6706,0070:6708]
-156 -> Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid [0070:6707,0070:6709,0070:670a]
+155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid [0070:6706,0070:6708]
+156 -> Hauppauge WinTV-HVR1120 DVB-T/Hybrid [0070:6707,0070:6709,0070:670a]
157 -> Avermedia AVerTV Studio 507UA [1461:a11b]
158 -> AVerMedia Cardbus TV/Radio (E501R) [1461:b7e9]
159 -> Beholder BeholdTV 505 RDS [0000:505B]
ATLX ETHERNET DRIVERS
M: Jay Cliburn <jcliburn@gmail.com>
-M: Chris Snook <csnook@redhat.com>
+M: Chris Snook <chris.snook@gmail.com>
M: Jie Yang <jie.yang@atheros.com>
L: atl1-devel@lists.sourceforge.net
W: http://sourceforge.net/projects/atl1
S: Maintained
F: drivers/media/video/gspca/pac207.c
+GSPCA SN9C20X SUBDRIVER
+P: Brian Johnson
+M: brijohn@gmail.com
+L: linux-media@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+S: Maintained
+F: drivers/media/video/gspca/sn9c20x.c
+
GSPCA T613 SUBDRIVER
M: Leandro Costantino <lcostantino@gmail.com>
L: linux-media@vger.kernel.org
MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
S: Orphan
+L: linux-mmc@vger.kernel.org
F: drivers/mmc/
F: include/linux/mmc/
S: Maintained
F: net/
F: include/net/
+F: include/linux/in.h
+F: include/linux/net.h
+F: include/linux/netdevice.h
NETWORKING [IPv4/IPv6]
M: "David S. Miller" <davem@davemloft.net>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
S: Odd Fixes
F: drivers/net/
+F: include/linux/if_*
+F: include/linux/*device.h
NETXEN (1/10) GbE SUPPORT
M: Dhananjay Phadke <dhananjay@netxen.com>
T: git git://git.open-osd.org/open-osd.git
S: Maintained
F: drivers/scsi/osd/
-F: drivers/include/scsi/osd_*
+F: include/scsi/osd_*
F: fs/exofs/
P54 WIRELESS DRIVER
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 31
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
to the person responsible for the code relevant to what you were doing.
If it occurs repeatably try and describe how to recreate it. That is
worth even more than the oops itself. The list of maintainers and
-mailing lists is in the MAINTAINERS file in this directory.
+mailing lists is in the MAINTAINERS file in this directory. If you
+know the file name that causes the problem you can use the following
+command in this directory to find some of the maintainers of that file:
+ perl scripts/get_maintainer.pl -f <filename>
If it is a security bug, please copy the Security Contact listed
in the MAINTAINERS file. They can help coordinate bugfix and disclosure.
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_ISP1301_OMAP is not set
CONFIG_TWL4030_USB=y
-CONFIG_MMC=m
+CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
struct membank {
unsigned long start;
unsigned long size;
- int node;
+ unsigned short node;
+ unsigned short highmem;
};
struct meminfo {
#include <mach/hardware.h>
-#define IO_SPACE_LIMIT 0xffff0000
+#define IO_SPACE_LIMIT 0x0000ffff
extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
}
+static int __init ts219_pci_init(void)
+{
+ if (machine_is_ts219())
+ kirkwood_pcie_init();
+
+ return 0;
+}
+subsys_initcall(ts219_pci_init);
+
MACHINE_START(TS219, "QNAP TS-119/TS-219")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
static int devboard_sdhc2_get_ro(struct device *dev)
{
- return gpio_get_value(SDHC2_WP);
+ return !gpio_get_value(SDHC2_WP);
}
static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
static int marxbot_sdhc2_get_ro(struct device *dev)
{
- return gpio_get_value(SDHC2_WP);
+ return !gpio_get_value(SDHC2_WP);
}
static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
static int moboard_sdhc1_get_ro(struct device *dev)
{
- return gpio_get_value(SDHC1_WP);
+ return !gpio_get_value(SDHC1_WP);
}
static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
#include "devices.h"
static unsigned int pcm037_eet_pins[] = {
- /* SPI #1 */
- MX31_PIN_CSPI1_MISO__MISO,
- MX31_PIN_CSPI1_MOSI__MOSI,
- MX31_PIN_CSPI1_SCLK__SCLK,
- MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI1_SS0__SS0,
- MX31_PIN_CSPI1_SS1__SS1,
- MX31_PIN_CSPI1_SS2__SS2,
-
/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
/* GPIO keys */
static void __init omap_2430sdp_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
static void __init omap_3430sdp_init_irq(void)
{
- omap2_init_common_hw(hyb18m512160af6_sdrc_params);
+ omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
}
static void __init omap_4430sdp_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(1);
#endif
static void __init omap_apollon_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
apollon_init_smc91x();
static void __init omap_generic_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
}
static void __init omap_h4_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
h4_init_flash();
static void __init omap_ldp_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
ldp_init_smsc911x();
static void __init omap3_beagle_init_irq(void)
{
- omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
usb_musb_init();
omap3beagle_flash_init();
+
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_cfg_reg(H16_34XX_SDRC_CKE0);
+ omap_cfg_reg(H17_34XX_SDRC_CKE1);
}
static void __init omap3_beagle_map_io(void)
static void __init omap3_evm_init_irq(void)
{
- omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
omap3evm_init_smc911x();
#include <mach/mcspi.h>
#include <mach/usb.h>
#include <mach/keypad.h>
+#include <mach/mux.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
static void __init omap3pandora_init_irq(void)
{
- omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
omap3pandora_ads7846_init();
pandora_keys_gpio_init();
usb_musb_init();
+
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_cfg_reg(H16_34XX_SDRC_CKE0);
+ omap_cfg_reg(H17_34XX_SDRC_CKE1);
}
static void __init omap3pandora_map_io(void)
#include <mach/gpmc.h>
#include <mach/hardware.h>
#include <mach/nand.h>
+#include <mach/mux.h>
#include <mach/usb.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#define OVERO_GPIO_BT_XGATE 15
#define OVERO_GPIO_W2W_NRESET 16
+#define OVERO_GPIO_PENDOWN 114
#define OVERO_GPIO_BT_NRESET 164
#define OVERO_GPIO_USBH_CPEN 168
#define OVERO_GPIO_USBH_NRESET 183
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(overo_smsc911x_resources),
- .resource = &overo_smsc911x_resources,
+ .resource = overo_smsc911x_resources,
.dev = {
.platform_data = &overo_smsc911x_config,
},
static void __init overo_init_irq(void)
{
- omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
overo_ads7846_init();
overo_init_smsc911x();
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_cfg_reg(H16_34XX_SDRC_CKE0);
+ omap_cfg_reg(H17_34XX_SDRC_CKE1);
+
if ((gpio_request(OVERO_GPIO_W2W_NRESET,
"OVERO_GPIO_W2W_NRESET") == 0) &&
(gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) {
.setup = rx51_twlgpio_setup,
};
+static struct twl4030_usb_data rx51_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
static struct twl4030_platform_data rx51_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &rx51_gpio_data,
.keypad = &rx51_kp_data,
.madc = &rx51_madc_data,
+ .usb = &rx51_usb_data,
.vaux1 = &rx51_vaux1,
.vaux2 = &rx51_vaux2,
static void __init rx51_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
omap_serial_init();
usb_musb_init();
rx51_peripherals_init();
+
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_cfg_reg(H16_34XX_SDRC_CKE0);
+ omap_cfg_reg(H17_34XX_SDRC_CKE1);
}
static void __init rx51_map_io(void)
static void __init omap_zoom2_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
#include <mach/clock.h>
#include <mach/clockdomain.h>
#include <mach/cpu.h>
+#include <mach/prcm.h>
#include <asm/div64.h>
#include <mach/sdrc.h>
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
-#define MAX_CLOCK_ENABLE_WAIT 100000
-
/* DPLL rate rounding: minimum DPLL multiplier, divider values */
#define DPLL_MIN_MULTIPLIER 1
#define DPLL_MIN_DIVIDER 1
}
/**
- * omap2_wait_clock_ready - wait for clock to enable
- * @reg: physical address of clock IDLEST register
- * @mask: value to mask against to determine if the clock is active
- * @name: name of the clock (for printk)
+ * omap2_clk_dflt_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Note: We don't need special code here for INVERT_ENABLE for the
+ * time being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL
*
- * Returns 1 if the clock enabled in time, or 0 if it failed to enable
- * in roughly MAX_CLOCK_ENABLE_WAIT microseconds.
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's
+ * just a matter of XORing the bits.
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as MAILBOXES) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
*/
-int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)
+void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
+ u8 *other_bit)
{
- int i = 0;
- int ena = 0;
+ u32 r;
/*
- * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
- * 34xx reverses this, just to keep us on our toes
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
+ * it's just a matter of XORing the bits.
*/
- if (cpu_mask & (RATE_IN_242X | RATE_IN_243X))
- ena = mask;
- else if (cpu_mask & RATE_IN_343X)
- ena = 0;
-
- /* Wait for lock */
- while (((__raw_readl(reg) & mask) != ena) &&
- (i++ < MAX_CLOCK_ENABLE_WAIT)) {
- udelay(1);
- }
-
- if (i <= MAX_CLOCK_ENABLE_WAIT)
- pr_debug("Clock %s stable after %d loops\n", name, i);
- else
- printk(KERN_ERR "Clock %s didn't enable in %d tries\n",
- name, MAX_CLOCK_ENABLE_WAIT);
-
-
- return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0;
-};
+ r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
+ *other_reg = (__force void __iomem *)r;
+ *other_bit = clk->enable_bit;
+}
-/*
- * Note: We don't need special code here for INVERT_ENABLE
- * for the time being since INVERT_ENABLE only applies to clocks enabled by
- * CM_CLKEN_PLL
+/**
+ * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
+ * @clk: struct clk * to find IDLEST info for
+ * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
+ * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in
+ *
+ * Return the CM_IDLEST register address and bit shift corresponding
+ * to the module that "owns" this clock. This default code assumes
+ * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
+ * the IDLEST register address ID corresponds to the CM_*CLKEN
+ * register address ID (e.g., that CM_FCLKEN2 corresponds to
+ * CM_IDLEST2). This is not true for all modules. No return value.
*/
-static void omap2_clk_wait_ready(struct clk *clk)
+void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
+ u8 *idlest_bit)
{
- void __iomem *reg, *other_reg, *st_reg;
- u32 bit;
+ u32 r;
- /*
- * REVISIT: This code is pretty ugly. It would be nice to generalize
- * it and pull it into struct clk itself somehow.
- */
- reg = clk->enable_reg;
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = clk->enable_bit;
+}
- /*
- * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
- * it's just a matter of XORing the bits.
- */
- other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN));
+/**
+ * omap2_module_wait_ready - wait for an OMAP module to leave IDLE
+ * @clk: struct clk * belonging to the module
+ *
+ * If the necessary clocks for the OMAP hardware IP block that
+ * corresponds to clock @clk are enabled, then wait for the module to
+ * indicate readiness (i.e., to leave IDLE). This code does not
+ * belong in the clock code and will be moved in the medium term to
+ * module-dependent code. No return value.
+ */
+static void omap2_module_wait_ready(struct clk *clk)
+{
+ void __iomem *companion_reg, *idlest_reg;
+ u8 other_bit, idlest_bit;
+
+ /* Not all modules have multiple clocks that their IDLEST depends on */
+ if (clk->ops->find_companion) {
+ clk->ops->find_companion(clk, &companion_reg, &other_bit);
+ if (!(__raw_readl(companion_reg) & (1 << other_bit)))
+ return;
+ }
- /* Check if both functional and interface clocks
- * are running. */
- bit = 1 << clk->enable_bit;
- if (!(__raw_readl(other_reg) & bit))
- return;
- st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */
+ clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit);
- omap2_wait_clock_ready(st_reg, bit, clk->name);
+ omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name);
}
-static int omap2_dflt_clk_enable(struct clk *clk)
+int omap2_dflt_clk_enable(struct clk *clk)
{
u32 v;
if (unlikely(clk->enable_reg == NULL)) {
- printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+ pr_err("clock.c: Enable for %s without enable code\n",
clk->name);
return 0; /* REVISIT: -EINVAL */
}
__raw_writel(v, clk->enable_reg);
v = __raw_readl(clk->enable_reg); /* OCP barrier */
- return 0;
-}
+ if (clk->ops->find_idlest)
+ omap2_module_wait_ready(clk);
-static int omap2_dflt_clk_enable_wait(struct clk *clk)
-{
- int ret;
-
- if (!clk->enable_reg) {
- printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
- clk->name);
- return 0; /* REVISIT: -EINVAL */
- }
-
- ret = omap2_dflt_clk_enable(clk);
- if (ret == 0)
- omap2_clk_wait_ready(clk);
- return ret;
+ return 0;
}
-static void omap2_dflt_clk_disable(struct clk *clk)
+void omap2_dflt_clk_disable(struct clk *clk)
{
u32 v;
}
const struct clkops clkops_omap2_dflt_wait = {
- .enable = omap2_dflt_clk_enable_wait,
+ .enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
+ .find_companion = omap2_clk_dflt_find_companion,
+ .find_idlest = omap2_clk_dflt_find_idlest,
};
const struct clkops clkops_omap2_dflt = {
u32 omap2_get_dpll_rate(struct clk *clk);
int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
void omap2_clk_prepare_for_reboot(void);
+int omap2_dflt_clk_enable(struct clk *clk);
+void omap2_dflt_clk_disable(struct clk *clk);
+void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
+ u8 *other_bit);
+void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
+ u8 *idlest_bit);
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_omap2_dflt;
#include <mach/clock.h>
#include <mach/sram.h>
+#include <mach/prcm.h>
#include <asm/div64.h>
#include <asm/clkdev.h>
static const struct clkops clkops_oscck;
static const struct clkops clkops_fixed;
+static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit);
+
+/* 2430 I2CHS has non-standard IDLEST register */
+static const struct clkops clkops_omap2430_i2chs_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = omap2430_clk_i2chs_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
#include "clock24xx.h"
struct omap_clk {
* Omap24xx specific clock functions
*-------------------------------------------------------------------------*/
+/**
+ * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
+ * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function
+ * passes back the correct CM_IDLEST register address for I2CHS
+ * modules. No return value.
+ */
+static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit)
+{
+ *idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST);
+ *idlest_bit = clk->enable_bit;
+}
+
+
/**
* omap2xxx_clk_get_core_rate - return the CORE_CLK rate
* @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
else if (clk == &apll54_ck)
cval = OMAP24XX_ST_54M_APLL;
- omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
- clk->name);
+ omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
+ clk->name);
/*
* REVISIT: Should we return an error code if omap2_wait_clock_ready()
static struct clk i2chs2_fck = {
.name = "i2c_fck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2430_i2chs_wait,
.id = 2,
.parent = &func_96m_ck,
.clkdm_name = "core_l4_clkdm",
static struct clk i2chs1_fck = {
.name = "i2c_fck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2430_i2chs_wait,
.id = 1,
.parent = &func_96m_ck,
.clkdm_name = "core_l4_clkdm",
* OMAP3-specific clock framework functions
*
* Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2009 Nokia Corporation
*
* Written by Paul Walmsley
* Testing and integration fixes by Jouni Högander
static const struct clkops clkops_noncore_dpll_ops;
+static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit);
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit);
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit);
+
+static const struct clkops clkops_omap3430es2_ssi_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = omap3430es2_clk_ssi_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+static const struct clkops clkops_omap3430es2_hsotgusb_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+static const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
#include "clock34xx.h"
struct omap_clk {
CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1),
CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X),
CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X),
- CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X),
- CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X),
+ CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1),
+ CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2),
+ CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1),
+ CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2),
CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X),
- CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X),
+ CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es1, CK_3430ES1),
+ CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es2, CK_3430ES2),
CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X),
CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X),
CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X),
CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X),
CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X),
- CLK(NULL, "ssi_ick", &ssi_ick, CK_343X),
+ CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1),
+ CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2),
CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1),
CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X),
CLK(NULL, "aes1_ick", &aes1_ick, CK_343X),
CLK("omap_rng", "ick", &rng_ick, CK_343X),
CLK(NULL, "sha11_ick", &sha11_ick, CK_343X),
CLK(NULL, "des1_ick", &des1_ick, CK_343X),
- CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X),
+ CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1),
+ CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2),
CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X),
CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X),
CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X),
- CLK("omapfb", "ick", &dss_ick, CK_343X),
+ CLK("omapfb", "ick", &dss_ick_3430es1, CK_3430ES1),
+ CLK("omapfb", "ick", &dss_ick_3430es2, CK_3430ES2),
CLK(NULL, "cam_mclk", &cam_mclk, CK_343X),
CLK(NULL, "cam_ick", &cam_ick, CK_343X),
CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X),
*/
#define SDRC_MPURATE_LOOPS 96
+/**
+ * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
+ * from the CM_{I,F}CLKEN bit. Pass back the correct info via
+ * @idlest_reg and @idlest_bit. No return value.
+ */
+static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
+}
+
+/**
+ * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
+ * target IDLEST bits. For our purposes, we are concerned with the
+ * target IDLEST bits, which exist at a different bit position than
+ * the *CLKEN bit position for these modules (DSS and USBHOST) (The
+ * default find_idlest code assumes that they are at the same
+ * position.) No return value.
+ */
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ /* USBHOST_IDLE has same shift */
+ *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
+}
+
+/**
+ * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
+ * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
+ * @idlest_reg and @idlest_bit. No return value.
+ */
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
+}
+
/**
* omap3_dpll_recalc - recalculate DPLL rate
* @clk: DPLL struct clk
u32 unlock_dll = 0;
u32 c;
unsigned long validrate, sdrcrate, mpurate;
- struct omap_sdrc_params *sp;
+ struct omap_sdrc_params *sdrc_cs0;
+ struct omap_sdrc_params *sdrc_cs1;
+ int ret;
if (!clk || !rate)
return -EINVAL;
else
sdrcrate >>= ((clk->rate / rate) >> 1);
- sp = omap2_sdrc_get_params(sdrcrate);
- if (!sp)
+ ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
+ if (ret)
return -EINVAL;
if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
validrate);
- pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
- sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
-
- omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
- sp->actim_ctrlb, new_div, unlock_dll, c,
- sp->mr, rate > clk->rate);
+ pr_debug("clock: SDRC CS0 timing params used:"
+ " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+ sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+ sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
+ if (sdrc_cs1)
+ pr_debug("clock: SDRC CS1 timing params used: "
+ " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+ sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+ sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+
+ if (sdrc_cs1)
+ omap3_configure_core_dpll(
+ new_div, unlock_dll, c, rate > clk->rate,
+ sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+ sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+ sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+ sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+ else
+ omap3_configure_core_dpll(
+ new_div, unlock_dll, c, rate > clk->rate,
+ sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+ sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+ 0, 0, 0, 0);
return 0;
}
{ .parent = NULL }
};
-static struct clk ssi_ssr_fck = {
+static struct clk ssi_ssr_fck_3430es1 = {
.name = "ssi_ssr_fck",
.ops = &clkops_omap2_dflt,
.init = &omap2_init_clksel_parent,
.recalc = &omap2_clksel_recalc,
};
-static struct clk ssi_sst_fck = {
+static struct clk ssi_ssr_fck_3430es2 = {
+ .name = "ssi_ssr_fck",
+ .ops = &clkops_omap3430es2_ssi_wait,
+ .init = &omap2_init_clksel_parent,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+ .enable_bit = OMAP3430_EN_SSI_SHIFT,
+ .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+ .clksel_mask = OMAP3430_CLKSEL_SSI_MASK,
+ .clksel = ssi_ssr_clksel,
+ .clkdm_name = "core_l4_clkdm",
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es1 = {
.name = "ssi_sst_fck",
.ops = &clkops_null,
- .parent = &ssi_ssr_fck,
+ .parent = &ssi_ssr_fck_3430es1,
+ .fixed_div = 2,
+ .recalc = &omap2_fixed_divisor_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es2 = {
+ .name = "ssi_sst_fck",
+ .ops = &clkops_null,
+ .parent = &ssi_ssr_fck_3430es2,
.fixed_div = 2,
.recalc = &omap2_fixed_divisor_recalc,
};
.recalc = &followparent_recalc,
};
-static struct clk hsotgusb_ick = {
+static struct clk hsotgusb_ick_3430es1 = {
.name = "hsotgusb_ick",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
+ .parent = &core_l3_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT,
+ .clkdm_name = "core_l3_clkdm",
+ .recalc = &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick_3430es2 = {
+ .name = "hsotgusb_ick",
+ .ops = &clkops_omap3430es2_hsotgusb_wait,
.parent = &core_l3_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT,
.recalc = &followparent_recalc,
};
-static struct clk ssi_ick = {
+static struct clk ssi_ick_3430es1 = {
.name = "ssi_ick",
.ops = &clkops_omap2_dflt,
.parent = &ssi_l4_ick,
.recalc = &followparent_recalc,
};
+static struct clk ssi_ick_3430es2 = {
+ .name = "ssi_ick",
+ .ops = &clkops_omap3430es2_ssi_wait,
+ .parent = &ssi_l4_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = OMAP3430_EN_SSI_SHIFT,
+ .clkdm_name = "core_l4_clkdm",
+ .recalc = &followparent_recalc,
+};
+
/* REVISIT: Technically the TRM claims that this is CORE_CLK based,
* but l4_ick makes more sense to me */
};
/* DSS */
-static struct clk dss1_alwon_fck = {
+static struct clk dss1_alwon_fck_3430es1 = {
.name = "dss1_alwon_fck",
.ops = &clkops_omap2_dflt,
.parent = &dpll4_m4x2_ck,
.recalc = &followparent_recalc,
};
+static struct clk dss1_alwon_fck_3430es2 = {
+ .name = "dss1_alwon_fck",
+ .ops = &clkops_omap3430es2_dss_usbhost_wait,
+ .parent = &dpll4_m4x2_ck,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+ .enable_bit = OMAP3430_EN_DSS1_SHIFT,
+ .clkdm_name = "dss_clkdm",
+ .recalc = &followparent_recalc,
+};
+
static struct clk dss_tv_fck = {
.name = "dss_tv_fck",
.ops = &clkops_omap2_dflt,
.recalc = &followparent_recalc,
};
-static struct clk dss_ick = {
+static struct clk dss_ick_3430es1 = {
/* Handles both L3 and L4 clocks */
.name = "dss_ick",
.ops = &clkops_omap2_dflt,
.recalc = &followparent_recalc,
};
+static struct clk dss_ick_3430es2 = {
+ /* Handles both L3 and L4 clocks */
+ .name = "dss_ick",
+ .ops = &clkops_omap3430es2_dss_usbhost_wait,
+ .parent = &l4_ick,
+ .init = &omap2_init_clk_clkdm,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
+ .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
+ .clkdm_name = "dss_clkdm",
+ .recalc = &followparent_recalc,
+};
+
/* CAM */
static struct clk cam_mclk = {
static struct clk usbhost_120m_fck = {
.name = "usbhost_120m_fck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &dpll5_m2_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
static struct clk usbhost_48m_fck = {
.name = "usbhost_48m_fck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap3430es2_dss_usbhost_wait,
.parent = &omap_48m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
static struct clk usbhost_ick = {
/* Handles both L3 and L4 clocks */
.name = "usbhost_ick",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap3430es2_dss_usbhost_wait,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
* These registers appear once per CM module.
*/
-#define OMAP3430_CM_REVISION OMAP_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG OMAP_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL OMAP_CM_REGADDR(OCP_MOD, 0x009c)
+#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
return v;
}
-void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
+void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1)
{
omap2_mux_init();
#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
- omap2_sdrc_init(sp);
+ omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
_omap2_init_reprogram_sdrc();
#endif
gpmc_init();
if (i != 0)
break;
ret = PTR_ERR(reg);
+ hsmmc[i].vcc = NULL;
goto err;
}
hsmmc[i].vcc = reg;
static void twl_mmc_cleanup(struct device *dev)
{
struct omap_mmc_platform_data *mmc = dev->platform_data;
+ int i;
gpio_free(mmc->slots[0].switch_pin);
+ for(i = 0; i < ARRAY_SIZE(hsmmc); i++) {
+ regulator_put(hsmmc[i].vcc);
+ regulator_put(hsmmc[i].vcc_aux);
+ }
}
#ifdef CONFIG_PM
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+
+/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
+MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
};
#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
#define __ARCH_ARM_MACH_OMAP2_PM_H
-extern int omap2_pm_init(void);
-extern int omap3_pm_init(void);
-
#ifdef CONFIG_PM_DEBUG
extern void omap2_pm_dump(int mode, int resume, unsigned int us);
extern int omap2_pm_debug;
WKUP_MOD, PM_WKEN);
}
-int __init omap2_pm_init(void)
+static int __init omap2_pm_init(void)
{
u32 l;
struct power_state {
struct powerdomain *pwrdm;
u32 next_state;
+#ifdef CONFIG_SUSPEND
u32 saved_state;
+#endif
struct list_head node;
};
local_irq_enable();
}
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state;
+
static int omap3_pm_prepare(void)
{
disable_hlt();
restore:
/* Restore next_pwrsts */
list_for_each_entry(pwrst, &pwrst_list, node) {
- set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
if (state > pwrst->next_state) {
printk(KERN_INFO "Powerdomain (%s) didn't enter "
pwrst->pwrdm->name, pwrst->next_state);
ret = -1;
}
+ set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
}
if (ret)
printk(KERN_ERR "Could not enter target state in pm_suspend\n");
return ret;
}
-static int omap3_pm_enter(suspend_state_t state)
+static int omap3_pm_enter(suspend_state_t unused)
{
int ret = 0;
- switch (state) {
+ switch (suspend_state) {
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
ret = omap3_pm_suspend();
enable_hlt();
}
+/* Hooks to enable / disable UART interrupts during suspend */
+static int omap3_pm_begin(suspend_state_t state)
+{
+ suspend_state = state;
+ omap_uart_enable_irqs(0);
+ return 0;
+}
+
+static void omap3_pm_end(void)
+{
+ suspend_state = PM_SUSPEND_ON;
+ omap_uart_enable_irqs(1);
+ return;
+}
+
static struct platform_suspend_ops omap_pm_ops = {
+ .begin = omap3_pm_begin,
+ .end = omap3_pm_end,
.prepare = omap3_pm_prepare,
.enter = omap3_pm_enter,
.finish = omap3_pm_finish,
.valid = suspend_valid_only_mem,
};
+#endif /* CONFIG_SUSPEND */
/**
/* Clear any pending PRCM interrupts */
prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ /* Don't attach IVA interrupts */
+ prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+ prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+ prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+ prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
+ /* Clear any pending 'reset' flags */
+ prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
+ /* Clear any pending PRCM interrupts */
+ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
omap3_iva_idle();
omap3_d2d_idle();
}
return 0;
}
-int __init omap3_pm_init(void)
+static int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
int ret;
_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
omap34xx_cpu_suspend_sz);
+#ifdef CONFIG_SUSPEND
suspend_set_ops(&omap_pm_ops);
+#endif /* CONFIG_SUSPEND */
pm_idle = omap3_pm_idle;
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/delay.h>
#include <mach/common.h>
#include <mach/prcm.h>
static void __iomem *prm_base;
static void __iomem *cm_base;
+#define MAX_MODULE_ENABLE_WAIT 100000
+
u32 omap_prcm_get_reset_sources(void)
{
/* XXX This presumably needs modification for 34XX */
}
EXPORT_SYMBOL(cm_rmw_mod_reg_bits);
+/**
+ * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
+ * @reg: physical address of module IDLEST register
+ * @mask: value to mask against to determine if the module is active
+ * @name: name of the clock (for printk)
+ *
+ * Returns 1 if the module indicated readiness in time, or 0 if it
+ * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds.
+ */
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name)
+{
+ int i = 0;
+ int ena = 0;
+
+ /*
+ * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+ * 34xx reverses this, just to keep us on our toes
+ */
+ if (cpu_is_omap24xx())
+ ena = mask;
+ else if (cpu_is_omap34xx())
+ ena = 0;
+ else
+ BUG();
+
+ /* Wait for lock */
+ while (((__raw_readl(reg) & mask) != ena) &&
+ (i++ < MAX_MODULE_ENABLE_WAIT))
+ udelay(1);
+
+ if (i < MAX_MODULE_ENABLE_WAIT)
+ pr_debug("cm: Module associated with clock %s ready after %d "
+ "loops\n", name, i);
+ else
+ pr_err("cm: Module associated with clock %s didn't enable in "
+ "%d tries\n", name, MAX_MODULE_ENABLE_WAIT);
+
+ return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
+};
+
void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
{
prm_base = omap2_globals->prm;
#include <mach/sdrc.h>
#include "sdrc.h"
-static struct omap_sdrc_params *sdrc_init_params;
+static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
void __iomem *omap2_sdrc_base;
void __iomem *omap2_sms_base;
/**
* omap2_sdrc_get_params - return SDRC register values for a given clock rate
* @r: SDRC clock rate (in Hz)
+ * @sdrc_cs0: chip select 0 ram timings **
+ * @sdrc_cs1: chip select 1 ram timings **
*
* Return pre-calculated values for the SDRC_ACTIM_CTRLA,
- * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given
- * SDRC clock rate 'r'. These parameters control various timing
- * delays in the SDRAM controller that are expressed in terms of the
- * number of SDRC clock cycles to wait; hence the clock rate
- * dependency. Note that sdrc_init_params must be sorted rate
- * descending. Also assumes that both chip-selects use the same
- * timing parameters. Returns a struct omap_sdrc_params * upon
- * success, or NULL upon failure.
+ * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL and SDRC_MR registers in sdrc_cs[01]
+ * structs,for a given SDRC clock rate 'r'.
+ * These parameters control various timing delays in the SDRAM controller
+ * that are expressed in terms of the number of SDRC clock cycles to
+ * wait; hence the clock rate dependency.
+ *
+ * Supports 2 different timing parameters for both chip selects.
+ *
+ * Note 1: the sdrc_init_params_cs[01] must be sorted rate descending.
+ * Note 2: If sdrc_init_params_cs_1 is not NULL it must be of same size
+ * as sdrc_init_params_cs_0.
+ *
+ * Fills in the struct omap_sdrc_params * for each chip select.
+ * Returns 0 upon success or -1 upon failure.
*/
-struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
+int omap2_sdrc_get_params(unsigned long r,
+ struct omap_sdrc_params **sdrc_cs0,
+ struct omap_sdrc_params **sdrc_cs1)
{
- struct omap_sdrc_params *sp;
+ struct omap_sdrc_params *sp0, *sp1;
- if (!sdrc_init_params)
- return NULL;
+ if (!sdrc_init_params_cs0)
+ return -1;
- sp = sdrc_init_params;
+ sp0 = sdrc_init_params_cs0;
+ sp1 = sdrc_init_params_cs1;
- while (sp->rate && sp->rate != r)
- sp++;
+ while (sp0->rate && sp0->rate != r) {
+ sp0++;
+ if (sdrc_init_params_cs1)
+ sp1++;
+ }
- if (!sp->rate)
- return NULL;
+ if (!sp0->rate)
+ return -1;
- return sp;
+ *sdrc_cs0 = sp0;
+ *sdrc_cs1 = sp1;
+ return 0;
}
/**
* omap2_sdrc_init - initialize SMS, SDRC devices on boot
- * @sp: pointer to a null-terminated list of struct omap_sdrc_params
+ * @sdrc_cs[01]: pointers to a null-terminated list of struct omap_sdrc_params
+ * Support for 2 chip selects timings
*
* Turn on smart idle modes for SDRAM scheduler and controller.
* Program a known-good configuration for the SDRC to deal with buggy
* bootloaders.
*/
-void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
+void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1)
{
u32 l;
l |= (0x2 << 3);
sdrc_write_reg(l, SDRC_SYSCONFIG);
- sdrc_init_params = sp;
+ sdrc_init_params_cs0 = sdrc_cs0;
+ sdrc_init_params_cs1 = sdrc_cs1;
/* XXX Enable SRFRONIDLEREQ here also? */
+ /*
+ * PWDENA should not be set due to 34xx erratum 1.150 - PWDENA
+ * can cause random memory corruption
+ */
l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
- (1 << SDRC_POWER_PWDENA_SHIFT) |
(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
sdrc_write_reg(l, SDRC_POWER);
}
struct plat_serial8250_port *p;
struct list_head node;
+ struct platform_device pdev;
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
int context_valid;
#endif
};
-static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
static LIST_HEAD(uart_list);
-static struct plat_serial8250_port serial_platform_data[] = {
+static struct plat_serial8250_port serial_platform_data0[] = {
{
.membase = IO_ADDRESS(OMAP_UART1_BASE),
.mapbase = OMAP_UART1_BASE,
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
+ .flags = 0
+ }
+};
+
+static struct plat_serial8250_port serial_platform_data1[] = {
+ {
.membase = IO_ADDRESS(OMAP_UART2_BASE),
.mapbase = OMAP_UART2_BASE,
.irq = 73,
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
+ .flags = 0
+ }
+};
+
+static struct plat_serial8250_port serial_platform_data2[] = {
+ {
.membase = IO_ADDRESS(OMAP_UART3_BASE),
.mapbase = OMAP_UART3_BASE,
.irq = 74,
clk_disable(uart->fck);
}
+static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
+{
+ /* Set wake-enable bit */
+ if (uart->wk_en && uart->wk_mask) {
+ u32 v = __raw_readl(uart->wk_en);
+ v |= uart->wk_mask;
+ __raw_writel(v, uart->wk_en);
+ }
+
+ /* Ensure IOPAD wake-enables are set */
+ if (cpu_is_omap34xx() && uart->padconf) {
+ u16 v = omap_ctrl_readw(uart->padconf);
+ v |= OMAP3_PADCONF_WAKEUPENABLE0;
+ omap_ctrl_writew(v, uart->padconf);
+ }
+}
+
+static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
+{
+ /* Clear wake-enable bit */
+ if (uart->wk_en && uart->wk_mask) {
+ u32 v = __raw_readl(uart->wk_en);
+ v &= ~uart->wk_mask;
+ __raw_writel(v, uart->wk_en);
+ }
+
+ /* Ensure IOPAD wake-enables are cleared */
+ if (cpu_is_omap34xx() && uart->padconf) {
+ u16 v = omap_ctrl_readw(uart->padconf);
+ v &= ~OMAP3_PADCONF_WAKEUPENABLE0;
+ omap_ctrl_writew(v, uart->padconf);
+ }
+}
+
static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
int enable)
{
static void omap_uart_allow_sleep(struct omap_uart_state *uart)
{
+ if (device_may_wakeup(&uart->pdev.dev))
+ omap_uart_enable_wakeup(uart);
+ else
+ omap_uart_disable_wakeup(uart);
+
if (!uart->clocked)
return;
/* Check for normal UART wakeup */
if (__raw_readl(uart->wk_st) & uart->wk_mask)
omap_uart_block_sleep(uart);
-
return;
}
}
return IRQ_NONE;
}
-static u32 sleep_timeout = DEFAULT_TIMEOUT;
-
static void omap_uart_idle_init(struct omap_uart_state *uart)
{
- u32 v;
struct plat_serial8250_port *p = uart->p;
int ret;
uart->can_sleep = 0;
- uart->timeout = sleep_timeout;
+ uart->timeout = DEFAULT_TIMEOUT;
setup_timer(&uart->timer, omap_uart_idle_timer,
(unsigned long) uart);
mod_timer(&uart->timer, jiffies + uart->timeout);
uart->padconf = 0;
}
- /* Set wake-enable bit */
- if (uart->wk_en && uart->wk_mask) {
- v = __raw_readl(uart->wk_en);
- v |= uart->wk_mask;
- __raw_writel(v, uart->wk_en);
- }
-
- /* Ensure IOPAD wake-enables are set */
- if (cpu_is_omap34xx() && uart->padconf) {
- u16 v;
-
- v = omap_ctrl_readw(uart->padconf);
- v |= OMAP3_PADCONF_WAKEUPENABLE0;
- omap_ctrl_writew(v, uart->padconf);
- }
-
p->flags |= UPF_SHARE_IRQ;
ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
"serial idle", (void *)uart);
WARN_ON(ret);
}
-static ssize_t sleep_timeout_show(struct kobject *kobj,
- struct kobj_attribute *attr,
+void omap_uart_enable_irqs(int enable)
+{
+ int ret;
+ struct omap_uart_state *uart;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ if (enable)
+ ret = request_irq(uart->p->irq, omap_uart_interrupt,
+ IRQF_SHARED, "serial idle", (void *)uart);
+ else
+ free_irq(uart->p->irq, (void *)uart);
+ }
+}
+
+static ssize_t sleep_timeout_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
- return sprintf(buf, "%u\n", sleep_timeout / HZ);
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
+ struct omap_uart_state *uart = container_of(pdev,
+ struct omap_uart_state, pdev);
+
+ return sprintf(buf, "%u\n", uart->timeout / HZ);
}
-static ssize_t sleep_timeout_store(struct kobject *kobj,
- struct kobj_attribute *attr,
+static ssize_t sleep_timeout_store(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t n)
{
- struct omap_uart_state *uart;
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
+ struct omap_uart_state *uart = container_of(pdev,
+ struct omap_uart_state, pdev);
unsigned int value;
if (sscanf(buf, "%u", &value) != 1) {
printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
return -EINVAL;
}
- sleep_timeout = value * HZ;
- list_for_each_entry(uart, &uart_list, node) {
- uart->timeout = sleep_timeout;
- if (uart->timeout)
- mod_timer(&uart->timer, jiffies + uart->timeout);
- else
- /* A zero value means disable timeout feature */
- omap_uart_block_sleep(uart);
- }
+
+ uart->timeout = value * HZ;
+ if (uart->timeout)
+ mod_timer(&uart->timer, jiffies + uart->timeout);
+ else
+ /* A zero value means disable timeout feature */
+ omap_uart_block_sleep(uart);
+
return n;
}
-static struct kobj_attribute sleep_timeout_attr =
- __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
-
+DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr))
#else
static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#define DEV_CREATE_FILE(dev, attr)
#endif /* CONFIG_PM */
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
+ {
+ .pdev = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data0,
+ },
+ },
+ }, {
+ .pdev = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = serial_platform_data1,
+ },
+ },
+ }, {
+ .pdev = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev = {
+ .platform_data = serial_platform_data2,
+ },
+ },
},
};
void __init omap_serial_init(void)
{
- int i, err;
+ int i;
const struct omap_uart_config *info;
char name[16];
if (info == NULL)
return;
- if (cpu_is_omap44xx()) {
- for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
- serial_platform_data[i].irq += 32;
- }
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
- struct plat_serial8250_port *p = serial_platform_data + i;
struct omap_uart_state *uart = &omap_uart[i];
+ struct platform_device *pdev = &uart->pdev;
+ struct device *dev = &pdev->dev;
+ struct plat_serial8250_port *p = dev->platform_data;
if (!(info->enabled_uarts & (1 << i))) {
p->membase = NULL;
uart->num = i;
p->private_data = uart;
uart->p = p;
- list_add(&uart->node, &uart_list);
+ list_add_tail(&uart->node, &uart_list);
+
+ if (cpu_is_omap44xx())
+ p->irq += 32;
omap_uart_enable_clocks(uart);
omap_uart_reset(uart);
omap_uart_idle_init(uart);
- }
-
- err = platform_device_register(&serial_device);
-
-#ifdef CONFIG_PM
- if (!err)
- err = sysfs_create_file(&serial_device.dev.kobj,
- &sleep_timeout_attr.attr);
-#endif
+ if (WARN_ON(platform_device_register(pdev)))
+ continue;
+ if ((cpu_is_omap34xx() && uart->padconf) ||
+ (uart->wk_en && uart->wk_mask)) {
+ device_init_wakeup(dev, true);
+ DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
+ }
+ }
}
-
.text
-/* r4 parameters */
+/* r1 parameters */
#define SDRC_NO_UNLOCK_DLL 0x0
#define SDRC_UNLOCK_DLL 0x1
/* SDRC_POWER bit settings */
#define SRFRONIDLEREQ_MASK 0x40
-#define PWDENA_MASK 0x4
/* CM_IDLEST1_CORE bit settings */
#define ST_SDRC_MASK 0x2
/*
* omap3_sram_configure_core_dpll - change DPLL3 M2 divider
- * r0 = new SDRC_RFR_CTRL register contents
- * r1 = new SDRC_ACTIM_CTRLA register contents
- * r2 = new SDRC_ACTIM_CTRLB register contents
- * r3 = new M2 divider setting (only 1 and 2 supported right now)
- * r4 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for
+ *
+ * Params passed in registers:
+ * r0 = new M2 divider setting (only 1 and 2 supported right now)
+ * r1 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for
* SDRC rates < 83MHz
- * r5 = number of MPU cycles to wait for SDRC to stabilize after
+ * r2 = number of MPU cycles to wait for SDRC to stabilize after
* reprogramming the SDRC when switching to a slower MPU speed
- * r6 = new SDRC_MR_0 register value
- * r7 = increasing SDRC rate? (1 = yes, 0 = no)
+ * r3 = increasing SDRC rate? (1 = yes, 0 = no)
+ *
+ * Params passed via the stack. The needed params will be copied in SRAM
+ * before use by the code in SRAM (SDRAM is not accessible during SDRC
+ * reconfiguration):
+ * new SDRC_RFR_CTRL_0 register contents
+ * new SDRC_ACTIM_CTRL_A_0 register contents
+ * new SDRC_ACTIM_CTRL_B_0 register contents
+ * new SDRC_MR_0 register value
+ * new SDRC_RFR_CTRL_1 register contents
+ * new SDRC_ACTIM_CTRL_A_1 register contents
+ * new SDRC_ACTIM_CTRL_B_1 register contents
+ * new SDRC_MR_1 register value
*
+ * If the param SDRC_RFR_CTRL_1 is 0, the parameters
+ * are not programmed into the SDRC CS1 registers
*/
ENTRY(omap3_sram_configure_core_dpll)
stmfd sp!, {r1-r12, lr} @ store regs to stack
- ldr r4, [sp, #52] @ pull extra args off the stack
- ldr r5, [sp, #56] @ load extra args from the stack
- ldr r6, [sp, #60] @ load extra args from the stack
- ldr r7, [sp, #64] @ load extra args from the stack
+
+ @ pull the extra args off the stack
+ @ and store them in SRAM
+ ldr r4, [sp, #52]
+ str r4, omap_sdrc_rfr_ctrl_0_val
+ ldr r4, [sp, #56]
+ str r4, omap_sdrc_actim_ctrl_a_0_val
+ ldr r4, [sp, #60]
+ str r4, omap_sdrc_actim_ctrl_b_0_val
+ ldr r4, [sp, #64]
+ str r4, omap_sdrc_mr_0_val
+ ldr r4, [sp, #68]
+ str r4, omap_sdrc_rfr_ctrl_1_val
+ cmp r4, #0 @ if SDRC_RFR_CTRL_1 is 0,
+ beq skip_cs1_params @ do not use cs1 params
+ ldr r4, [sp, #72]
+ str r4, omap_sdrc_actim_ctrl_a_1_val
+ ldr r4, [sp, #76]
+ str r4, omap_sdrc_actim_ctrl_b_1_val
+ ldr r4, [sp, #80]
+ str r4, omap_sdrc_mr_1_val
+skip_cs1_params:
dsb @ flush buffered writes to interconnect
- cmp r7, #1 @ if increasing SDRC clk rate,
+
+ cmp r3, #1 @ if increasing SDRC clk rate,
bleq configure_sdrc @ program the SDRC regs early (for RFR)
- cmp r4, #SDRC_UNLOCK_DLL @ set the intended DLL state
+ cmp r1, #SDRC_UNLOCK_DLL @ set the intended DLL state
bleq unlock_dll
blne lock_dll
bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC
bl configure_core_dpll @ change the DPLL3 M2 divider
+ mov r12, r2
+ bl wait_clk_stable @ wait for SDRC to stabilize
bl enable_sdrc @ take SDRC out of idle
- cmp r4, #SDRC_UNLOCK_DLL @ wait for DLL status to change
+ cmp r1, #SDRC_UNLOCK_DLL @ wait for DLL status to change
bleq wait_dll_unlock
blne wait_dll_lock
- cmp r7, #1 @ if increasing SDRC clk rate,
+ cmp r3, #1 @ if increasing SDRC clk rate,
beq return_to_sdram @ return to SDRAM code, otherwise,
bl configure_sdrc @ reprogram SDRC regs now
- mov r12, r5
- bl wait_clk_stable @ wait for SDRC to stabilize
return_to_sdram:
isb @ prevent speculative exec past here
mov r0, #0 @ return value
unlock_dll:
ldr r11, omap3_sdrc_dlla_ctrl
ldr r12, [r11]
- and r12, r12, #FIXEDDELAY_MASK
+ bic r12, r12, #FIXEDDELAY_MASK
orr r12, r12, #FIXEDDELAY_DEFAULT
orr r12, r12, #DLLIDLE_MASK
str r12, [r11] @ (no OCP barrier needed)
ldr r12, [r11] @ read the contents of SDRC_POWER
mov r9, r12 @ keep a copy of SDRC_POWER bits
orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle
- bic r12, r12, #PWDENA_MASK @ clear PWDENA
str r12, [r11] @ write back to SDRC_POWER register
ldr r12, [r11] @ posted-write barrier for SDRC
idle_sdrc:
ldr r12, [r11]
ldr r10, core_m2_mask_val @ modify m2 for core dpll
and r12, r12, r10
- orr r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
+ orr r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
str r12, [r11]
ldr r12, [r11] @ posted-write barrier for CM
bx lr
bne wait_dll_unlock
bx lr
configure_sdrc:
- ldr r11, omap3_sdrc_rfr_ctrl
- str r0, [r11]
- ldr r11, omap3_sdrc_actim_ctrla
- str r1, [r11]
- ldr r11, omap3_sdrc_actim_ctrlb
- str r2, [r11]
+ ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM
+ ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM
+ str r12, [r11] @ store
+ ldr r12, omap_sdrc_actim_ctrl_a_0_val
+ ldr r11, omap3_sdrc_actim_ctrl_a_0
+ str r12, [r11]
+ ldr r12, omap_sdrc_actim_ctrl_b_0_val
+ ldr r11, omap3_sdrc_actim_ctrl_b_0
+ str r12, [r11]
+ ldr r12, omap_sdrc_mr_0_val
ldr r11, omap3_sdrc_mr_0
- str r6, [r11]
- ldr r6, [r11] @ posted-write barrier for SDRC
+ str r12, [r11]
+ ldr r12, omap_sdrc_rfr_ctrl_1_val
+ cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0,
+ beq skip_cs1_prog @ do not program cs1 params
+ ldr r11, omap3_sdrc_rfr_ctrl_1
+ str r12, [r11]
+ ldr r12, omap_sdrc_actim_ctrl_a_1_val
+ ldr r11, omap3_sdrc_actim_ctrl_a_1
+ str r12, [r11]
+ ldr r12, omap_sdrc_actim_ctrl_b_1_val
+ ldr r11, omap3_sdrc_actim_ctrl_b_1
+ str r12, [r11]
+ ldr r12, omap_sdrc_mr_1_val
+ ldr r11, omap3_sdrc_mr_1
+ str r12, [r11]
+skip_cs1_prog:
+ ldr r12, [r11] @ posted-write barrier for SDRC
bx lr
omap3_sdrc_power:
.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
omap3_cm_iclken1_core:
.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
-omap3_sdrc_rfr_ctrl:
+
+omap3_sdrc_rfr_ctrl_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap3_sdrc_actim_ctrla:
+omap3_sdrc_rfr_ctrl_1:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1)
+omap3_sdrc_actim_ctrl_a_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
-omap3_sdrc_actim_ctrlb:
+omap3_sdrc_actim_ctrl_a_1:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1)
+omap3_sdrc_actim_ctrl_b_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
+omap3_sdrc_actim_ctrl_b_1:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1)
omap3_sdrc_mr_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
+omap3_sdrc_mr_1:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_MR_1)
+omap_sdrc_rfr_ctrl_0_val:
+ .word 0xDEADBEEF
+omap_sdrc_rfr_ctrl_1_val:
+ .word 0xDEADBEEF
+omap_sdrc_actim_ctrl_a_0_val:
+ .word 0xDEADBEEF
+omap_sdrc_actim_ctrl_a_1_val:
+ .word 0xDEADBEEF
+omap_sdrc_actim_ctrl_b_0_val:
+ .word 0xDEADBEEF
+omap_sdrc_actim_ctrl_b_1_val:
+ .word 0xDEADBEEF
+omap_sdrc_mr_0_val:
+ .word 0xDEADBEEF
+omap_sdrc_mr_1_val:
+ .word 0xDEADBEEF
+
omap3_sdrc_dlla_status:
.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
omap3_sdrc_dlla_ctrl:
ENTRY(omap3_sram_configure_core_dpll_sz)
.word . - omap3_sram_configure_core_dpll
+
}
};
-static void u300_init_check_chip(void)
+static void __init u300_init_check_chip(void)
{
u16 val;
printk("%d pages swap cached\n", cached);
}
+static void __init find_node_limits(int node, struct meminfo *mi,
+ unsigned long *min, unsigned long *max_low, unsigned long *max_high)
+{
+ int i;
+
+ *min = -1UL;
+ *max_low = *max_high = 0;
+
+ for_each_nodebank(i, mi, node) {
+ struct membank *bank = &mi->bank[i];
+ unsigned long start, end;
+
+ start = bank_pfn_start(bank);
+ end = bank_pfn_end(bank);
+
+ if (*min > start)
+ *min = start;
+ if (*max_high < end)
+ *max_high = end;
+ if (bank->highmem)
+ continue;
+ if (*max_low < end)
+ *max_low = end;
+ }
+}
+
/*
* FIXME: We really want to avoid allocating the bootmap bitmap
* over the top of the initrd. Hopefully, this is located towards
#endif
}
-static unsigned long __init bootmem_init_node(int node, struct meminfo *mi)
+static void __init bootmem_init_node(int node, struct meminfo *mi,
+ unsigned long start_pfn, unsigned long end_pfn)
{
- unsigned long start_pfn, end_pfn, boot_pfn;
+ unsigned long boot_pfn;
unsigned int boot_pages;
pg_data_t *pgdat;
int i;
- start_pfn = -1UL;
- end_pfn = 0;
-
/*
- * Calculate the pfn range, and map the memory banks for this node.
+ * Map the memory banks for this node.
*/
for_each_nodebank(i, mi, node) {
struct membank *bank = &mi->bank[i];
- unsigned long start, end;
- start = bank_pfn_start(bank);
- end = bank_pfn_end(bank);
-
- if (start_pfn > start)
- start_pfn = start;
- if (end_pfn < end)
- end_pfn = end;
-
- map_memory_bank(bank);
+ if (!bank->highmem)
+ map_memory_bank(bank);
}
- /*
- * If there is no memory in this node, ignore it.
- */
- if (end_pfn == 0)
- return end_pfn;
-
/*
* Allocate the bootmem bitmap page.
*/
for_each_nodebank(i, mi, node) {
struct membank *bank = &mi->bank[i];
- free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
+ if (!bank->highmem)
+ free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
}
*/
reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
-
- return end_pfn;
}
static void __init bootmem_reserve_initrd(int node)
static void __init bootmem_free_node(int node, struct meminfo *mi)
{
unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
- unsigned long start_pfn, end_pfn;
- pg_data_t *pgdat = NODE_DATA(node);
+ unsigned long min, max_low, max_high;
int i;
- start_pfn = pgdat->bdata->node_min_pfn;
- end_pfn = pgdat->bdata->node_low_pfn;
+ find_node_limits(node, mi, &min, &max_low, &max_high);
/*
* initialise the zones within this node.
*/
memset(zone_size, 0, sizeof(zone_size));
- memset(zhole_size, 0, sizeof(zhole_size));
/*
* The size of this node has already been determined. If we need
* to do anything fancy with the allocation of this memory to the
* zones, now is the time to do it.
*/
- zone_size[0] = end_pfn - start_pfn;
+ zone_size[0] = max_low - min;
+#ifdef CONFIG_HIGHMEM
+ zone_size[ZONE_HIGHMEM] = max_high - max_low;
+#endif
/*
* For each bank in this node, calculate the size of the holes.
* holes = node_size - sum(bank_sizes_in_node)
*/
- zhole_size[0] = zone_size[0];
- for_each_nodebank(i, mi, node)
- zhole_size[0] -= bank_pfn_size(&mi->bank[i]);
+ memcpy(zhole_size, zone_size, sizeof(zhole_size));
+ for_each_nodebank(i, mi, node) {
+ int idx = 0;
+#ifdef CONFIG_HIGHMEM
+ if (mi->bank[i].highmem)
+ idx = ZONE_HIGHMEM;
+#endif
+ zhole_size[idx] -= bank_pfn_size(&mi->bank[i]);
+ }
/*
* Adjust the sizes according to any special requirements for
*/
arch_adjust_zones(node, zone_size, zhole_size);
- free_area_init_node(node, zone_size, start_pfn, zhole_size);
+ free_area_init_node(node, zone_size, min, zhole_size);
}
void __init bootmem_init(void)
{
struct meminfo *mi = &meminfo;
- unsigned long memend_pfn = 0;
+ unsigned long min, max_low, max_high;
int node, initrd_node;
/*
*/
initrd_node = check_initrd(mi);
+ max_low = max_high = 0;
+
/*
* Run through each node initialising the bootmem allocator.
*/
for_each_node(node) {
- unsigned long end_pfn = bootmem_init_node(node, mi);
+ unsigned long node_low, node_high;
+
+ find_node_limits(node, mi, &min, &node_low, &node_high);
+
+ if (node_low > max_low)
+ max_low = node_low;
+ if (node_high > max_high)
+ max_high = node_high;
+
+ /*
+ * If there is no memory in this node, ignore it.
+ * (We can't have nodes which have no lowmem)
+ */
+ if (node_low == 0)
+ continue;
+
+ bootmem_init_node(node, mi, min, node_low);
/*
* Reserve any special node zero regions.
*/
if (node == initrd_node)
bootmem_reserve_initrd(node);
-
- /*
- * Remember the highest memory PFN.
- */
- if (end_pfn > memend_pfn)
- memend_pfn = end_pfn;
}
/*
for_each_node(node)
bootmem_free_node(node, mi);
- high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1;
+ high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1;
/*
* This doesn't seem to be used by the Linux memory manager any
* Note: max_low_pfn and max_pfn reflect the number of _pages_ in
* the system, not the maximum PFN.
*/
- max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
+ max_low_pfn = max_low - PHYS_PFN_OFFSET;
+ max_pfn = max_high - PHYS_PFN_OFFSET;
}
static inline int free_area(unsigned long pfn, unsigned long end, char *s)
static void __init sanity_check_meminfo(void)
{
- int i, j;
+ int i, j, highmem = 0;
for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
struct membank *bank = &meminfo.bank[j];
*bank = meminfo.bank[i];
#ifdef CONFIG_HIGHMEM
+ if (__va(bank->start) > VMALLOC_MIN ||
+ __va(bank->start) < (void *)PAGE_OFFSET)
+ highmem = 1;
+
+ bank->highmem = highmem;
+
/*
* Split those memory banks which are partially overlapping
* the vmalloc area greatly simplifying things later.
i++;
bank[1].size -= VMALLOC_MIN - __va(bank->start);
bank[1].start = __pa(VMALLOC_MIN - 1) + 1;
+ bank[1].highmem = highmem = 1;
j++;
}
bank->size = VMALLOC_MIN - __va(bank->start);
/* Ensure desired rate is within allowed range. Some govenors
* (ondemand) will just pass target_freq=0 to get the minimum. */
- if (target_freq < policy->cpuinfo.min_freq)
- target_freq = policy->cpuinfo.min_freq;
- if (target_freq > policy->cpuinfo.max_freq)
- target_freq = policy->cpuinfo.max_freq;
+ if (target_freq < policy->min)
+ target_freq = policy->min;
+ if (target_freq > policy->max)
+ target_freq = policy->max;
freqs.old = omap_getspeed(0);
freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
cur_lch = next_lch;
} while (next_lch != -1);
- } else if (cpu_class_is_omap2()) {
+ } else if (cpu_is_omap242x() ||
+ (cpu_is_omap243x() && omap_type() <= OMAP2430_REV_ES1_0)) {
+
/* Errata: Need to write lch even if not using chaining */
dma_write(lch, CLNK_CTRL(lch));
}
__raw_writel(l, reg);
}
-static int __omap_get_gpio_datain(int gpio)
+static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
{
- struct gpio_bank *bank;
void __iomem *reg;
if (check_gpio(gpio) < 0)
return -EINVAL;
- bank = get_gpio_bank(gpio);
reg = bank->base;
switch (bank->method) {
#ifdef CONFIG_ARCH_OMAP1
& (1 << get_gpio_index(gpio))) != 0;
}
+static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
+{
+ void __iomem *reg;
+
+ if (check_gpio(gpio) < 0)
+ return -EINVAL;
+ reg = bank->base;
+
+ switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+ case METHOD_MPUIO:
+ reg += OMAP_MPUIO_OUTPUT;
+ break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+ case METHOD_GPIO_1510:
+ reg += OMAP1510_GPIO_DATA_OUTPUT;
+ break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+ case METHOD_GPIO_1610:
+ reg += OMAP1610_GPIO_DATAOUT;
+ break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
+ case METHOD_GPIO_730:
+ reg += OMAP730_GPIO_DATA_OUTPUT;
+ break;
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_DATA_OUTPUT;
+ break;
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
+ case METHOD_GPIO_24XX:
+ reg += OMAP24XX_GPIO_DATAOUT;
+ break;
+#endif
+ default:
+ return -EINVAL;
+ }
+
+ return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
+}
+
#define MOD_REG_BIT(reg, bit_mask, set) \
do { \
int l = __raw_readl(base + reg); \
struct gpio_bank *bank = get_irq_chip_data(irq);
_set_gpio_irqenable(bank, gpio, 0);
+ _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
}
static void gpio_unmask_irq(unsigned int irq)
unsigned int gpio = irq - IH_GPIO_BASE;
struct gpio_bank *bank = get_irq_chip_data(irq);
unsigned int irq_mask = 1 << get_gpio_index(gpio);
+ struct irq_desc *desc = irq_to_desc(irq);
+ u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK;
+
+ if (trigger)
+ _set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
/* For level-triggered GPIOs, the clearing must be done after
* the HW source is cleared, thus after the handler has run */
return 0;
}
+static int gpio_is_input(struct gpio_bank *bank, int mask)
+{
+ void __iomem *reg = bank->base;
+
+ switch (bank->method) {
+ case METHOD_MPUIO:
+ reg += OMAP_MPUIO_IO_CNTL;
+ break;
+ case METHOD_GPIO_1510:
+ reg += OMAP1510_GPIO_DIR_CONTROL;
+ break;
+ case METHOD_GPIO_1610:
+ reg += OMAP1610_GPIO_DIRECTION;
+ break;
+ case METHOD_GPIO_730:
+ reg += OMAP730_GPIO_DIR_CONTROL;
+ break;
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_DIR_CONTROL;
+ break;
+ case METHOD_GPIO_24XX:
+ reg += OMAP24XX_GPIO_OE;
+ break;
+ }
+ return __raw_readl(reg) & mask;
+}
+
static int gpio_get(struct gpio_chip *chip, unsigned offset)
{
- return __omap_get_gpio_datain(chip->base + offset);
+ struct gpio_bank *bank;
+ void __iomem *reg;
+ int gpio;
+ u32 mask;
+
+ gpio = chip->base + offset;
+ bank = get_gpio_bank(gpio);
+ reg = bank->base;
+ mask = 1 << get_gpio_index(gpio);
+
+ if (gpio_is_input(bank, mask))
+ return _get_gpio_datain(bank, gpio);
+ else
+ return _get_gpio_dataout(bank, gpio);
}
static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
#include <linux/debugfs.h>
#include <linux/seq_file.h>
-static int gpio_is_input(struct gpio_bank *bank, int mask)
-{
- void __iomem *reg = bank->base;
-
- switch (bank->method) {
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_IO_CNTL;
- break;
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DIR_CONTROL;
- break;
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_DIRECTION;
- break;
- case METHOD_GPIO_730:
- reg += OMAP730_GPIO_DIR_CONTROL;
- break;
- case METHOD_GPIO_850:
- reg += OMAP850_GPIO_DIR_CONTROL;
- break;
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_OE;
- break;
- }
- return __raw_readl(reg) & mask;
-}
-
-
static int dbg_gpio_show(struct seq_file *s, void *unused)
{
unsigned i, j, gpio;
struct clkops {
int (*enable)(struct clk *);
void (*disable)(struct clk *);
+ void (*find_idlest)(struct clk *, void __iomem **, u8 *);
+ void (*find_companion)(struct clk *, void __iomem **, u8 *);
};
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \
cpu_is_omap44xx())
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
-
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
#define OMAP2420_REV_ES1_0 0x24200024
int omap_chip_is(struct omap_chip_id oci);
void omap2_check_revision(void);
-
-#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
extern void omap1_init_common_hw(void);
extern void omap2_map_common_io(void);
-extern void omap2_init_common_hw(struct omap_sdrc_params *sp);
+extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1);
#define __arch_ioremap(p,s,t) omap_ioremap(p,s,t)
#define __arch_iounmap(v) omap_iounmap(v)
AE5_34XX_GPIO143,
H19_34XX_GPIO164_OUT,
J25_34XX_GPIO170,
+
+ /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
+ H16_34XX_SDRC_CKE0,
+ H17_34XX_SDRC_CKE1,
};
struct omap_mux_cfg {
u32 omap_prcm_get_reset_sources(void);
void omap_prcm_arch_reset(char mode);
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name);
#endif
#define SDRC_ACTIM_CTRL_A_0 0x09c
#define SDRC_ACTIM_CTRL_B_0 0x0a0
#define SDRC_RFR_CTRL_0 0x0a4
+#define SDRC_MR_1 0x0B4
+#define SDRC_ACTIM_CTRL_A_1 0x0C4
+#define SDRC_ACTIM_CTRL_B_1 0x0C8
+#define SDRC_RFR_CTRL_1 0x0D4
/*
* These values represent the number of memory clock cycles between
u32 mr;
};
-void __init omap2_sdrc_init(struct omap_sdrc_params *sp);
-struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r);
+void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1);
+int omap2_sdrc_get_params(unsigned long r,
+ struct omap_sdrc_params **sdrc_cs0,
+ struct omap_sdrc_params **sdrc_cs1);
#ifdef CONFIG_ARCH_OMAP2
extern void omap_uart_prepare_suspend(void);
extern void omap_uart_prepare_idle(int num);
extern void omap_uart_resume_idle(int num);
+extern void omap_uart_enable_irqs(int enable);
#endif
#endif
u32 mem_type);
extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
- u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2,
- u32 unlock_dll, u32 f, u32 sdrc_mr,
- u32 inc);
+extern u32 omap3_configure_core_dpll(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
u32 mem_type);
extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-
-extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
- u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2,
- u32 unlock_dll, u32 f, u32 sdrc_mr,
- u32 inc);
+extern u32 omap3_sram_configure_core_dpll(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
extern unsigned long omap3_sram_configure_core_dpll_sz;
#endif
#define OMAP2_SRAM_VA 0xe3000000
#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
#define OMAP3_SRAM_PA 0x40200000
-#define OMAP3_SRAM_VA 0xd7000000
+#define OMAP3_SRAM_VA 0xe3000000
#define OMAP3_SRAM_PUB_PA 0x40208000
-#define OMAP3_SRAM_PUB_VA 0xd7008000
+#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
#define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/
#define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/
#ifdef CONFIG_ARCH_OMAP3
-static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
- u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb,
- u32 m2, u32 unlock_dll,
- u32 f, u32 sdrc_mr, u32 inc);
-u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll,
- u32 f, u32 sdrc_mr, u32 inc)
+static u32 (*_omap3_sram_configure_core_dpll)(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+
+u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
{
BUG_ON(!_omap3_sram_configure_core_dpll);
- return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
- sdrc_actim_ctrla,
- sdrc_actim_ctrlb, m2,
- unlock_dll, f, sdrc_mr, inc);
+ return _omap3_sram_configure_core_dpll(
+ m2, unlock_dll, f, inc,
+ sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
+ sdrc_actim_ctrl_b_0, sdrc_mr_0,
+ sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
+ sdrc_actim_ctrl_b_1, sdrc_mr_1);
}
/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
#ifndef __PLAT_GPIO_H
#define __PLAT_GPIO_H
+#include <linux/init.h>
+
/*
* GENERIC_GPIO primitives.
*/
/* calculate the MISCCR setting for the clock */
- if (parent == &clk_xtal)
+ if (parent == &clk_mpll)
source = S3C2410_MISCCR_CLK0_MPLL;
else if (parent == &clk_upll)
source = S3C2410_MISCCR_CLK0_UPLL;
.debounce_max = 20,
.debounce_rep = 4,
.debounce_tol = 5,
+
+ .keep_vref_on = true,
+ .settle_delay_usecs = 500,
+ .penirq_recheck_delay_usecs = 100,
};
static struct spi_board_info __initdata spi1_board_info[] = {
brne 1f
/* At this point, "from" is word-aligned */
-2: sub r10, 4
- mov r9, r12
+2: mov r9, r12
+5: sub r10, 4
brlt 4f
3: ld.w r8, r11++
/* Handle unaligned "from" pointer */
1: sub r10, 4
+ movlt r9, r12
brlt 4b
add r10, r9
lsl r9, 2
st.b r12++, r8
ld.ub r8, r11++
st.b r12++, r8
- rjmp 2b
+ mov r8, r12
+ add pc, pc, r9
+ sub r8, 1
+ nop
+ sub r8, 1
+ nop
+ sub r8, 1
+ nop
+ mov r9, r8
+ rjmp 5b
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Fri May 22 10:02:33 2009
+# Linux kernel version: 2.6.31-rc6
+# Tue Aug 18 11:00:02 2009
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CSUM=y
+# CONFIG_PCI is not set
+CONFIG_NO_DMA=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
+
+#
+# Performance Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# Exectuable file formats
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_SAMPLES is not set
+# CONFIG_KMEMCHECK is not set
CONFIG_EARLY_PRINTK=y
CONFIG_HEART_BEAT=y
CONFIG_DEBUG_BOOTMEM=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc5
-# Mon May 11 09:01:02 2009
+# Linux kernel version: 2.6.31-rc6
+# Tue Aug 18 10:35:30 2009
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CSUM=y
# CONFIG_PCI is not set
-# CONFIG_NO_DMA is not set
+CONFIG_NO_DMA=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
+
+#
+# Performance Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_CMDLINE="console=ttyUL0,115200"
# CONFIG_CMDLINE_FORCE is not set
CONFIG_OF=y
-CONFIG_OF_DEVICE=y
CONFIG_PROC_DEVICETREE=y
+
+#
+# Advanced setup
+#
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_KERNEL_START=0x90000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
#
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
CONFIG_MISC_DEVICES=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
+# CONFIG_XILINX_HWICAP is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
/* should be defined in each interrupt controller driver */
extern unsigned int get_irq(struct pt_regs *regs);
-#define ack_bad_irq ack_bad_irq
-void ack_bad_irq(unsigned int irq);
#include <asm-generic/hardirq.h>
#endif /* _ASM_MICROBLAZE_HARDIRQ_H */
#include <linux/irq.h>
#include <asm/page.h>
#include <linux/io.h>
+#include <linux/bug.h>
#include <asm/prom.h>
#include <asm/irq.h>
if (intc)
break;
}
+ BUG_ON(!intc);
intc_baseaddr = *(int *) of_get_property(intc, "reg", NULL);
intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE);
}
EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves.
- */
-void ack_bad_irq(unsigned int irq)
-{
- printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq);
-}
-
static u32 concurrent_irq;
void do_IRQ(struct pt_regs *regs)
.long sys_fchmodat
.long sys_faccessat
.long sys_ni_syscall /* pselect6 */
- .long sys_ni_syscall /* sys_ppoll */
+ .long sys_ppoll
.long sys_unshare /* 310 */
.long sys_set_robust_list
.long sys_get_robust_list
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
+#include <linux/bug.h>
#include <asm/cpuinfo.h>
#include <asm/setup.h>
#include <asm/prom.h>
if (timer)
break;
}
+ BUG_ON(!timer);
timer_baseaddr = *(int *) of_get_property(timer, "reg", NULL);
timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE);
* (in case the address isn't page-aligned).
*/
#ifndef CONFIG_MMU
- map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)_end)),
+ map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)klimit)),
min_low_pfn, max_low_pfn);
#else
map_size = init_bootmem_node(&contig_page_data,
- PFN_UP(TOPHYS((u32)_end)), min_low_pfn, max_low_pfn);
+ PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn);
#endif
- lmb_reserve(PFN_UP(TOPHYS((u32)_end)) << PAGE_SHIFT, map_size);
+ lmb_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
/* free bootmem is whole main memory */
free_bootmem(memory_start, memory_size);
#define PAGE_SIZE (1UL << PAGE_SHIFT)
#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1))
+#ifdef CONFIG_HUGETLB_PAGE
#define HPAGE_SHIFT (PAGE_SHIFT + PAGE_SHIFT - 3)
#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)
#define HPAGE_MASK (~(HPAGE_SIZE - 1))
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
+#endif /* CONFIG_HUGETLB_PAGE */
#ifndef __ASSEMBLY__
__setup("condev=", condev_setup);
+static void __init set_preferred_console(void)
+{
+ if (MACHINE_IS_KVM) {
+ add_preferred_console("hvc", 0, NULL);
+ s390_virtio_console_init();
+ return;
+ }
+
+ if (CONSOLE_IS_3215 || CONSOLE_IS_SCLP)
+ add_preferred_console("ttyS", 0, NULL);
+ if (CONSOLE_IS_3270)
+ add_preferred_console("tty3270", 0, NULL);
+}
+
static int __init conmode_setup(char *str)
{
#if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
if (strncmp(str, "3270", 5) == 0)
SET_CONSOLE_3270;
#endif
+ set_preferred_console();
return 1;
}
void __init
setup_arch(char **cmdline_p)
{
- /* set up preferred console */
- add_preferred_console("ttyS", 0, NULL);
-
/*
* print what head.S has found out about the machine
*/
if (MACHINE_IS_VM)
pr_info("Linux is running as a z/VM "
"guest operating system in 64-bit mode\n");
- else if (MACHINE_IS_KVM) {
+ else if (MACHINE_IS_KVM)
pr_info("Linux is running under KVM in 64-bit mode\n");
- add_preferred_console("hvc", 0, NULL);
- s390_virtio_console_init();
- } else
+ else
pr_info("Linux is running natively in 64-bit mode\n");
#endif /* CONFIG_64BIT */
/* Setup default console */
conmode_default();
+ set_preferred_console();
/* Setup zfcpdump support */
setup_zfcpdump(console_devno);
},
};
-/* KEYSC */
+/* KEYSC in SoC (Needs SW33-2 set to ON) */
static struct sh_keysc_info keysc_info = {
.mode = SH_KEYSC_MODE_1,
.scan_timing = 10,
static struct resource keysc_resources[] = {
[0] = {
- .start = 0x1a204000,
- .end = 0x1a20400f,
+ .name = "KEYSC",
+ .start = 0x044b0000,
+ .end = 0x044b000f,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ0_KEY,
+ .start = 79,
.flags = IORESOURCE_IRQ,
},
};
tst #SUSP_SH_SF, r0
bt skip_set_sf
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+ /* DBSC: put memory in self-refresh mode */
- /* SDRAM: disable power down and put in self-refresh mode */
+ mov.l dben_reg, r4
+ mov.l dben_data0, r1
+ mov.l r1, @r4
+
+ mov.l dbrfpdn0_reg, r4
+ mov.l dbrfpdn0_data0, r1
+ mov.l r1, @r4
+
+ mov.l dbcmdcnt_reg, r4
+ mov.l dbcmdcnt_data0, r1
+ mov.l r1, @r4
+
+ mov.l dbcmdcnt_reg, r4
+ mov.l dbcmdcnt_data1, r1
+ mov.l r1, @r4
+
+ mov.l dbrfpdn0_reg, r4
+ mov.l dbrfpdn0_data1, r1
+ mov.l r1, @r4
+#else
+ /* SBSC: disable power down and put in self-refresh mode */
mov.l 1f, r4
mov.l 2f, r1
mov.l @r4, r2
mov.l 3f, r3
and r3, r2
mov.l r2, @r4
+#endif
skip_set_sf:
tst #SUSP_SH_SLEEP, r0
tst #SUSP_SH_SF, r0
bt skip_restore_sf
- /* SDRAM: set auto-refresh mode */
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+ /* DBSC: put memory in auto-refresh mode */
+
+ mov.l dbrfpdn0_reg, r4
+ mov.l dbrfpdn0_data0, r1
+ mov.l r1, @r4
+
+ /* sleep 140 ns */
+ nop
+ nop
+ nop
+ nop
+
+ mov.l dbcmdcnt_reg, r4
+ mov.l dbcmdcnt_data0, r1
+ mov.l r1, @r4
+
+ mov.l dbcmdcnt_reg, r4
+ mov.l dbcmdcnt_data1, r1
+ mov.l r1, @r4
+
+ mov.l dben_reg, r4
+ mov.l dben_data1, r1
+ mov.l r1, @r4
+
+ mov.l dbrfpdn0_reg, r4
+ mov.l dbrfpdn0_data2, r1
+ mov.l r1, @r4
+#else
+ /* SBSC: set auto-refresh mode */
mov.l 1f, r4
mov.l @r4, r2
mov.l 4f, r3
add r4, r3
or r2, r3
mov.l r3, @r1
+#endif
skip_restore_sf:
rts
nop
.balign 4
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+dben_reg: .long 0xfd000010 /* DBEN */
+dben_data0: .long 0
+dben_data1: .long 1
+dbrfpdn0_reg: .long 0xfd000040 /* DBRFPDN0 */
+dbrfpdn0_data0: .long 0
+dbrfpdn0_data1: .long 1
+dbrfpdn0_data2: .long 0x00010000
+dbcmdcnt_reg: .long 0xfd000014 /* DBCMDCNT */
+dbcmdcnt_data0: .long 2
+dbcmdcnt_data1: .long 4
+#else
1: .long 0xfe400008 /* SDCR0 */
2: .long 0x00000400
3: .long 0xffff7fff
4: .long 0xfffffbff
+#endif
5: .long 0xa4150020 /* STBCR */
6: .long 0xfe40001c /* RTCOR */
7: .long 0xfe400018 /* RTCNT */
dyn_size = pcpur_size - static_size - PERCPU_MODULE_RESERVE;
- ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
+ ptrs_size = PFN_ALIGN(nr_cpu_ids * sizeof(pcpur_ptrs[0]));
pcpur_ptrs = alloc_bootmem(ptrs_size);
for_each_possible_cpu(cpu) {
/* allocate address and map */
vm.flags = VM_ALLOC;
- vm.size = num_possible_cpus() * PCPU_CHUNK_SIZE;
+ vm.size = nr_cpu_ids * PCPU_CHUNK_SIZE;
vm_area_register_early(&vm, PCPU_CHUNK_SIZE);
for_each_possible_cpu(cpu) {
# create a compressed vmlinux image from the original vmlinux
#
-targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
+targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
#define _ASM_X86_PGTABLE_H
#include <asm/page.h>
+#include <asm/e820.h>
#include <asm/pgtable_types.h>
#define canon_pgprot(p) __pgprot(massage_pgprot(p))
-static inline int is_new_memtype_allowed(unsigned long flags,
- unsigned long new_flags)
+static inline int is_new_memtype_allowed(u64 paddr, unsigned long size,
+ unsigned long flags,
+ unsigned long new_flags)
{
+ /*
+ * PAT type is always WB for ISA. So no need to check.
+ */
+ if (is_ISA_range(paddr, paddr + size - 1))
+ return 1;
+
/*
* Certain new memtypes are not allowed with certain
* requested memtype:
* see table 4.2.3.0.1 in broacast_assist spec.
*/
struct bau_msg_header {
- unsigned int dest_subnodeid:6; /* must be zero */
+ unsigned int dest_subnodeid:6; /* must be 0x10, for the LB */
/* bits 5:0 */
unsigned int base_dest_nodeid:15; /* nasid>>1 (pnode) of */
/* bits 20:6 */ /* first bit in node_map */
unsigned long mask = cpumask_bits(cpumask)[0];
unsigned long flags;
+ if (WARN_ONCE(!mask, "empty IPI mask"))
+ return;
+
local_irq_save(flags);
WARN_ON(mask & ~cpumask_bits(cpu_online_mask)[0]);
__default_send_IPI_dest_field(mask, vector, apic->dest_logical);
return node_id.s.node_id;
}
-static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
if (!strcmp(oem_id, "SGI")) {
if (!strcmp(oem_table_id, "UVL"))
apic_write(APIC_SELF_IPI, vector);
}
-struct apic apic_x2apic_uv_x = {
+struct apic __refdata apic_x2apic_uv_x = {
.name = "UV large system",
.probe = NULL,
CFLAGS_REMOVE_common.o = -pg
endif
+# Make sure load_percpu_segment has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_common.o := $(nostackp)
+
obj-y := intel_cacheinfo.o addon_cpuid_features.o
obj-y += proc.o capflags.o powerflags.o common.o
obj-y += vmware.o hypervisor.o
}
/* Add per CPU specific workarounds here */
-static void mce_cpu_quirks(struct cpuinfo_x86 *c)
+static int mce_cpu_quirks(struct cpuinfo_x86 *c)
{
+ if (c->x86_vendor == X86_VENDOR_UNKNOWN) {
+ pr_info("MCE: unknown CPU type - not enabling MCE support.\n");
+ return -EOPNOTSUPP;
+ }
+
/* This should be disabled by the BIOS, but isn't always */
if (c->x86_vendor == X86_VENDOR_AMD) {
if (c->x86 == 15 && banks > 4) {
if ((c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xe)) &&
monarch_timeout < 0)
monarch_timeout = USEC_PER_SEC;
+
+ /*
+ * There are also broken BIOSes on some Pentium M and
+ * earlier systems:
+ */
+ if (c->x86 == 6 && c->x86_model <= 13 && mce_bootlog < 0)
+ mce_bootlog = 0;
}
if (monarch_timeout < 0)
monarch_timeout = 0;
if (mce_bootlog != 0)
mce_panic_timeout = 30;
+
+ return 0;
}
static void __cpuinit mce_ancient_init(struct cpuinfo_x86 *c)
if (!mce_available(c))
return;
- if (mce_cap_init() < 0) {
+ if (mce_cap_init() < 0 || mce_cpu_quirks(c) < 0) {
mce_disabled = 1;
return;
}
- mce_cpu_quirks(c);
machine_check_vector = do_machine_check;
cpu, __get_cpu_var(thermal_throttle_count));
add_taint(TAINT_MACHINE_CHECK);
- } else if (was_throttled) {
+ return 1;
+ }
+ if (was_throttled) {
printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu);
+ return 1;
}
- return 1;
+ return 0;
}
#ifdef CONFIG_SYSFS
* which will be freed later
*/
-#ifndef CONFIG_HOTPLUG_CPU
-.section .init.text,"ax",@progbits
-#endif
+__CPUINIT
#ifdef CONFIG_SMP
ENTRY(startup_32_smp)
#endif
iret
-#ifndef CONFIG_HOTPLUG_CPU
- __CPUINITDATA
-#else
__REFDATA
-#endif
.align 4
ENTRY(initial_code)
.long i386_start_kernel
if (!cpumask_test_cpu(cpu, c1e_mask)) {
cpumask_set_cpu(cpu, c1e_mask);
/*
- * Force broadcast so ACPI can not interfere. Needs
- * to run with interrupts enabled as it uses
- * smp_function_call.
+ * Force broadcast so ACPI can not interfere.
*/
- local_irq_enable();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
&cpu);
printk(KERN_INFO "Switch to broadcast mode on CPU%d\n",
cpu);
- local_irq_disable();
}
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
if (!chosen) {
size_t vm_size = VMALLOC_END - VMALLOC_START;
- size_t tot_size = num_possible_cpus() * PMD_SIZE;
+ size_t tot_size = nr_cpu_ids * PMD_SIZE;
/* on non-NUMA, embedding is better */
if (!pcpu_need_numa())
dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
/* allocate pointer array and alloc large pages */
- map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0]));
+ map_size = PFN_ALIGN(nr_cpu_ids * sizeof(pcpul_map[0]));
pcpul_map = alloc_bootmem(map_size);
for_each_possible_cpu(cpu) {
/* allocate address and map */
pcpul_vm.flags = VM_ALLOC;
- pcpul_vm.size = num_possible_cpus() * PMD_SIZE;
+ pcpul_vm.size = nr_cpu_ids * PMD_SIZE;
vm_area_register_early(&pcpul_vm, PMD_SIZE);
for_each_possible_cpu(cpu) {
PMD_SIZE, pcpul_vm.addr, NULL);
/* sort pcpul_map array for pcpu_lpage_remapped() */
- for (i = 0; i < num_possible_cpus() - 1; i++)
- for (j = i + 1; j < num_possible_cpus(); j++)
+ for (i = 0; i < nr_cpu_ids - 1; i++)
+ for (j = i + 1; j < nr_cpu_ids; j++)
if (pcpul_map[i].ptr > pcpul_map[j].ptr) {
struct pcpul_ent tmp = pcpul_map[i];
pcpul_map[i] = pcpul_map[j];
{
void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK);
unsigned long offset = (unsigned long)kaddr & ~PMD_MASK;
- int left = 0, right = num_possible_cpus() - 1;
+ int left = 0, right = nr_cpu_ids - 1;
int pos;
/* pcpul in use at all? */
pcpu4k_nr_static_pages = PFN_UP(static_size);
/* unaligned allocations can't be freed, round up to page size */
- pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * num_possible_cpus()
+ pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * nr_cpu_ids
* sizeof(pcpu4k_pages[0]));
pcpu4k_pages = alloc_bootmem(pages_size);
* note that base_dest_nodeid is actually a nasid.
*/
ad2->header.base_dest_nodeid = uv_partition_base_pnode << 1;
+ ad2->header.dest_subnodeid = 0x10; /* the LB */
ad2->header.command = UV_NET_ENDPOINT_INTD;
ad2->header.int_both = 1;
/*
data PT_LOAD FLAGS(7); /* RWE */
#ifdef CONFIG_X86_64
user PT_LOAD FLAGS(7); /* RWE */
- data.init PT_LOAD FLAGS(7); /* RWE */
#ifdef CONFIG_SMP
percpu PT_LOAD FLAGS(7); /* RWE */
#endif
- data.init2 PT_LOAD FLAGS(7); /* RWE */
+ init PT_LOAD FLAGS(7); /* RWE */
#endif
note PT_NOTE FLAGS(0); /* ___ */
}
__stop___ex_table = .;
} :text = 0x9090
- RODATA
+ RO_DATA(PAGE_SIZE)
/* Data */
- . = ALIGN(PAGE_SIZE);
.data : AT(ADDR(.data) - LOAD_OFFSET) {
/* Start of data section */
_sdata = .;
- DATA_DATA
- CONSTRUCTORS
- } :data
+
+ /* init_task */
+ INIT_TASK_DATA(THREAD_SIZE)
#ifdef CONFIG_X86_32
- /* 32 bit has nosave before _edata */
- . = ALIGN(PAGE_SIZE);
- .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
- }
+ /* 32 bit has nosave before _edata */
+ NOSAVE_DATA
#endif
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
- *(.data.page_aligned)
+ PAGE_ALIGNED_DATA(PAGE_SIZE)
*(.data.idt)
- }
-#ifdef CONFIG_X86_32
- . = ALIGN(32);
-#else
- . = ALIGN(PAGE_SIZE);
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
-#endif
- .data.cacheline_aligned :
- AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
- *(.data.cacheline_aligned)
- }
+ CACHELINE_ALIGNED_DATA(CONFIG_X86_L1_CACHE_BYTES)
- /* rarely changed data like cpu maps */
-#ifdef CONFIG_X86_32
- . = ALIGN(32);
-#else
- . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
-#endif
- .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
- *(.data.read_mostly)
+ DATA_DATA
+ CONSTRUCTORS
+
+ /* rarely changed data like cpu maps */
+ READ_MOSTLY_DATA(CONFIG_X86_INTERNODE_CACHE_BYTES)
/* End of data section */
_edata = .;
- }
+ } :data
#ifdef CONFIG_X86_64
#define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + \
- SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + \
- SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data) + SIZEOF(.data) + \
+ PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
+#define VSYSCALL_VIRT_ADDR ((ADDR(.data) + SIZEOF(.data) + \
+ PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
#endif /* CONFIG_X86_64 */
- /* init_task */
- . = ALIGN(THREAD_SIZE);
- .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
- *(.data.init_task)
+ /* Init code and data - will be freed after init */
+ . = ALIGN(PAGE_SIZE);
+ .init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) {
+ __init_begin = .; /* paired with __init_end */
}
-#ifdef CONFIG_X86_64
- :data.init
-#endif
+#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
/*
- * smp_locks might be freed after init
- * start/end must be page aligned
+ * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
+ * output PHDR, so the next output section - .init.text - should
+ * start another segment - init.
*/
- . = ALIGN(PAGE_SIZE);
- .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
- __smp_locks = .;
- *(.smp_locks)
- __smp_locks_end = .;
- . = ALIGN(PAGE_SIZE);
- }
+ PERCPU_VADDR(0, :percpu)
+#endif
- /* Init code and data - will be freed after init */
- . = ALIGN(PAGE_SIZE);
.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
- __init_begin = .; /* paired with __init_end */
_sinittext = .;
INIT_TEXT
_einittext = .;
}
+#ifdef CONFIG_X86_64
+ :init
+#endif
.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
INIT_DATA
}
#endif
-#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
- /*
- * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
- * output PHDR, so the next output section - __data_nosave - should
- * start another section data.init2. Also, pda should be at the head of
- * percpu area. Preallocate it and define the percpu offset symbol
- * so that it can be accessed as a percpu variable.
- */
- . = ALIGN(PAGE_SIZE);
- PERCPU_VADDR(0, :percpu)
-#else
+#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
PERCPU(PAGE_SIZE)
#endif
__init_end = .;
}
+ /*
+ * smp_locks might be freed after init
+ * start/end must be page aligned
+ */
+ . = ALIGN(PAGE_SIZE);
+ .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+ __smp_locks = .;
+ *(.smp_locks)
+ __smp_locks_end = .;
+ . = ALIGN(PAGE_SIZE);
+ }
+
#ifdef CONFIG_X86_64
.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
- } :data.init2
- /* use another section data.init2, see PERCPU_VADDR() above */
+ NOSAVE_DATA
+ }
#endif
/* BSS */
return ret;
#else
- reserve_bootmem(phys, len, BOOTMEM_DEFAULT);
+ reserve_bootmem(phys, len, flags);
#endif
if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) {
return ret;
if (flags != want_flags) {
- if (strict_prot || !is_new_memtype_allowed(want_flags, flags)) {
+ if (strict_prot ||
+ !is_new_memtype_allowed(paddr, size, want_flags, flags)) {
free_memtype(paddr, paddr + size);
printk(KERN_ERR "%s:%d map pfn expected mapping type %s"
" for %Lx-%Lx, got %s\n",
f->flush_mm = mm;
f->flush_va = va;
- cpumask_andnot(to_cpumask(f->flush_cpumask),
- cpumask, cpumask_of(smp_processor_id()));
-
- /*
- * We have to send the IPI only to
- * CPUs affected.
- */
- apic->send_IPI_mask(to_cpumask(f->flush_cpumask),
- INVALIDATE_TLB_VECTOR_START + sender);
+ if (cpumask_andnot(to_cpumask(f->flush_cpumask), cpumask, cpumask_of(smp_processor_id()))) {
+ /*
+ * We have to send the IPI only to
+ * CPUs affected.
+ */
+ apic->send_IPI_mask(to_cpumask(f->flush_cpumask),
+ INVALIDATE_TLB_VECTOR_START + sender);
- while (!cpumask_empty(to_cpumask(f->flush_cpumask)))
- cpu_relax();
+ while (!cpumask_empty(to_cpumask(f->flush_cpumask)))
+ cpu_relax();
+ }
f->flush_mm = NULL;
f->flush_va = 0;
CFLAGS_REMOVE_irq.o = -pg
endif
+# Make sure early boot has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_enlighten.o := $(nostackp)
+
obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \
time.o xen-asm.o xen-asm_$(BITS).o \
grant-table.o suspend.o
xen_domain_type = XEN_PV_DOMAIN;
- BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0);
-
- xen_setup_features();
-
/* Install Xen paravirt ops */
pv_info = xen_info;
pv_init_ops = xen_init_ops;
pv_apic_ops = xen_apic_ops;
pv_mmu_ops = xen_mmu_ops;
- xen_init_irq_ops();
+#ifdef CONFIG_X86_64
+ /*
+ * Setup percpu state. We only need to do this for 64-bit
+ * because 32-bit already has %fs set properly.
+ */
+ load_percpu_segment(0);
+#endif
+ xen_init_irq_ops();
xen_init_cpuid_mask();
#ifdef CONFIG_X86_LOCAL_APIC
set_xen_basic_apic_ops();
#endif
+ xen_setup_features();
+
if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
machine_ops = xen_machine_ops;
-#ifdef CONFIG_X86_64
- /*
- * Setup percpu state. We only need to do this for 64-bit
- * because 32-bit already has %fs set properly.
- */
- load_percpu_segment(0);
-#endif
/*
* The only reliable way to retain the initial address of the
* percpu gdt_page is to remember it here, so we can go and
pr->power.timer_broadcast_on_state = state;
}
-static void lapic_timer_propagate_broadcast(struct acpi_processor *pr)
+static void lapic_timer_propagate_broadcast(void *arg)
{
+ struct acpi_processor *pr = (struct acpi_processor *) arg;
unsigned long reason;
reason = pr->power.timer_broadcast_on_state < INT_MAX ?
working++;
}
- lapic_timer_propagate_broadcast(pr);
+ smp_call_function_single(pr->id, lapic_timer_propagate_broadcast,
+ pr, 1);
return (working);
}
* be obtained while the delayed work queue halt ensures that no more
* data is fed to the ldisc.
*
- * In order to wait for any existing references to complete see
- * tty_ldisc_wait_idle.
+ * You need to do a 'flush_scheduled_work()' (outside the ldisc_mutex)
+ * in order to make sure any currently executing ldisc work is also
+ * flushed.
*/
static int tty_ldisc_halt(struct tty_struct *tty)
* N_TTY.
*/
if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
+ /* Make sure the old ldisc is quiescent */
+ tty_ldisc_halt(tty);
+ flush_scheduled_work();
+
/* Avoid racing set_ldisc or tty_ldisc_release */
mutex_lock(&tty->ldisc_mutex);
if (tty->ldisc) { /* Not yet closed */
/* Switch back to N_TTY */
- tty_ldisc_halt(tty);
tty_ldisc_reinit(tty);
/* At this point we have a closed ldisc and we want to
reopen it. We could defer this to the next open but
struct platform_device *pdev;
unsigned long flags;
+ unsigned long flags_suspend;
unsigned long match_value;
unsigned long next_match_value;
unsigned long max_match_value;
return -EBUSY; /* cannot unregister clockevent and clocksource */
}
+static int sh_cmt_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sh_cmt_priv *p = platform_get_drvdata(pdev);
+
+ /* save flag state and stop CMT channel */
+ p->flags_suspend = p->flags;
+ sh_cmt_stop(p, p->flags);
+ return 0;
+}
+
+static int sh_cmt_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sh_cmt_priv *p = platform_get_drvdata(pdev);
+
+ /* start CMT channel from saved state */
+ sh_cmt_start(p, p->flags_suspend);
+ return 0;
+}
+
+static struct dev_pm_ops sh_cmt_dev_pm_ops = {
+ .suspend = sh_cmt_suspend,
+ .resume = sh_cmt_resume,
+};
+
static struct platform_driver sh_cmt_device_driver = {
.probe = sh_cmt_probe,
.remove = __devexit_p(sh_cmt_remove),
.driver = {
.name = "sh_cmt",
+ .pm = &sh_cmt_dev_pm_ops,
}
};
}
EXPORT_SYMBOL(drm_mode_object_find);
-/**
- * drm_crtc_from_fb - find the CRTC structure associated with an fb
- * @dev: DRM device
- * @fb: framebuffer in question
- *
- * LOCKING:
- * Caller must hold mode_config lock.
- *
- * Find CRTC in the mode_config structure that matches @fb.
- *
- * RETURNS:
- * Pointer to the CRTC or NULL if it wasn't found.
- */
-struct drm_crtc *drm_crtc_from_fb(struct drm_device *dev,
- struct drm_framebuffer *fb)
-{
- struct drm_crtc *crtc;
-
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
- if (crtc->fb == fb)
- return crtc;
- }
- return NULL;
-}
-
/**
* drm_framebuffer_init - initialize a framebuffer
* @dev: DRM device
{
struct drm_device *dev = fb->dev;
struct drm_crtc *crtc;
+ struct drm_mode_set set;
+ int ret;
/* remove from any CRTC */
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
- if (crtc->fb == fb)
- crtc->fb = NULL;
+ if (crtc->fb == fb) {
+ /* should turn off the crtc */
+ memset(&set, 0, sizeof(struct drm_mode_set));
+ set.crtc = crtc;
+ set.fb = NULL;
+ ret = crtc->funcs->set_config(&set);
+ if (ret)
+ DRM_ERROR("failed to reset crtc %p when fb was deleted\n", crtc);
+ }
}
drm_mode_object_put(dev, &fb->base);
set.mode = mode;
set.connectors = connector_set;
set.num_connectors = crtc_req->count_connectors;
- set.fb =fb;
+ set.fb = fb;
ret = crtc->funcs->set_config(&set);
out:
struct detailed_non_pixel *data = &timing->data.other_data;
struct drm_display_mode *newmode;
- /* EDID up to and including 1.2 may put monitor info here */
- if (edid->version == 1 && edid->revision < 3)
- continue;
-
- /* Detailed mode timing */
- if (timing->pixel_clock) {
+ /* X server check is version 1.1 or higher */
+ if (edid->version == 1 && edid->revision >= 1 &&
+ !timing->pixel_clock) {
+ /* Other timing or info */
+ switch (data->type) {
+ case EDID_DETAIL_MONITOR_SERIAL:
+ break;
+ case EDID_DETAIL_MONITOR_STRING:
+ break;
+ case EDID_DETAIL_MONITOR_RANGE:
+ /* Get monitor range data */
+ break;
+ case EDID_DETAIL_MONITOR_NAME:
+ break;
+ case EDID_DETAIL_MONITOR_CPDATA:
+ break;
+ case EDID_DETAIL_STD_MODES:
+ /* Five modes per detailed section */
+ for (j = 0; j < 5; i++) {
+ struct std_timing *std;
+ struct drm_display_mode *newmode;
+
+ std = &data->data.timings[j];
+ newmode = drm_mode_std(dev, std);
+ if (newmode) {
+ drm_mode_probed_add(connector, newmode);
+ modes++;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+ } else {
newmode = drm_mode_detailed(dev, edid, timing, quirks);
if (!newmode)
continue;
drm_mode_probed_add(connector, newmode);
modes++;
- continue;
- }
-
- /* Other timing or info */
- switch (data->type) {
- case EDID_DETAIL_MONITOR_SERIAL:
- break;
- case EDID_DETAIL_MONITOR_STRING:
- break;
- case EDID_DETAIL_MONITOR_RANGE:
- /* Get monitor range data */
- break;
- case EDID_DETAIL_MONITOR_NAME:
- break;
- case EDID_DETAIL_MONITOR_CPDATA:
- break;
- case EDID_DETAIL_STD_MODES:
- /* Five modes per detailed section */
- for (j = 0; j < 5; i++) {
- struct std_timing *std;
- struct drm_display_mode *newmode;
-
- std = &data->data.timings[j];
- newmode = drm_mode_std(dev, std);
- if (newmode) {
- drm_mode_probed_add(connector, newmode);
- modes++;
- }
- }
- break;
- default:
- break;
}
}
#define to_drm_minor(d) container_of(d, struct drm_minor, kdev)
#define to_drm_connector(d) container_of(d, struct drm_connector, kdev)
+static struct device_type drm_sysfs_device_minor = {
+ .name = "drm_minor"
+};
+
/**
- * drm_sysfs_suspend - DRM class suspend hook
+ * drm_class_suspend - DRM class suspend hook
* @dev: Linux device to suspend
* @state: power state to enter
*
* Just figures out what the actual struct drm_device associated with
* @dev is and calls its suspend hook, if present.
*/
-static int drm_sysfs_suspend(struct device *dev, pm_message_t state)
+static int drm_class_suspend(struct device *dev, pm_message_t state)
{
- struct drm_minor *drm_minor = to_drm_minor(dev);
- struct drm_device *drm_dev = drm_minor->dev;
-
- if (drm_minor->type == DRM_MINOR_LEGACY &&
- !drm_core_check_feature(drm_dev, DRIVER_MODESET) &&
- drm_dev->driver->suspend)
- return drm_dev->driver->suspend(drm_dev, state);
-
+ if (dev->type == &drm_sysfs_device_minor) {
+ struct drm_minor *drm_minor = to_drm_minor(dev);
+ struct drm_device *drm_dev = drm_minor->dev;
+
+ if (drm_minor->type == DRM_MINOR_LEGACY &&
+ !drm_core_check_feature(drm_dev, DRIVER_MODESET) &&
+ drm_dev->driver->suspend)
+ return drm_dev->driver->suspend(drm_dev, state);
+ }
return 0;
}
/**
- * drm_sysfs_resume - DRM class resume hook
+ * drm_class_resume - DRM class resume hook
* @dev: Linux device to resume
*
* Just figures out what the actual struct drm_device associated with
* @dev is and calls its resume hook, if present.
*/
-static int drm_sysfs_resume(struct device *dev)
+static int drm_class_resume(struct device *dev)
{
- struct drm_minor *drm_minor = to_drm_minor(dev);
- struct drm_device *drm_dev = drm_minor->dev;
-
- if (drm_minor->type == DRM_MINOR_LEGACY &&
- !drm_core_check_feature(drm_dev, DRIVER_MODESET) &&
- drm_dev->driver->resume)
- return drm_dev->driver->resume(drm_dev);
-
+ if (dev->type == &drm_sysfs_device_minor) {
+ struct drm_minor *drm_minor = to_drm_minor(dev);
+ struct drm_device *drm_dev = drm_minor->dev;
+
+ if (drm_minor->type == DRM_MINOR_LEGACY &&
+ !drm_core_check_feature(drm_dev, DRIVER_MODESET) &&
+ drm_dev->driver->resume)
+ return drm_dev->driver->resume(drm_dev);
+ }
return 0;
}
goto err_out;
}
- class->suspend = drm_sysfs_suspend;
- class->resume = drm_sysfs_resume;
+ class->suspend = drm_class_suspend;
+ class->resume = drm_class_resume;
err = class_create_file(class, &class_attr_version);
if (err)
minor->kdev.class = drm_class;
minor->kdev.release = drm_sysfs_device_release;
minor->kdev.devt = minor->device;
+ minor->kdev.type = &drm_sysfs_device_minor;
if (minor->type == DRM_MINOR_CONTROL)
minor_str = "controlD%d";
else if (minor->type == DRM_MINOR_RENDER)
}
+/*
+ * Interrupts
+ */
+int r100_irq_set(struct radeon_device *rdev)
+{
+ uint32_t tmp = 0;
+
+ if (rdev->irq.sw_int) {
+ tmp |= RADEON_SW_INT_ENABLE;
+ }
+ if (rdev->irq.crtc_vblank_int[0]) {
+ tmp |= RADEON_CRTC_VBLANK_MASK;
+ }
+ if (rdev->irq.crtc_vblank_int[1]) {
+ tmp |= RADEON_CRTC2_VBLANK_MASK;
+ }
+ WREG32(RADEON_GEN_INT_CNTL, tmp);
+ return 0;
+}
+
+static inline uint32_t r100_irq_ack(struct radeon_device *rdev)
+{
+ uint32_t irqs = RREG32(RADEON_GEN_INT_STATUS);
+ uint32_t irq_mask = RADEON_SW_INT_TEST | RADEON_CRTC_VBLANK_STAT |
+ RADEON_CRTC2_VBLANK_STAT;
+
+ if (irqs) {
+ WREG32(RADEON_GEN_INT_STATUS, irqs);
+ }
+ return irqs & irq_mask;
+}
+
+int r100_irq_process(struct radeon_device *rdev)
+{
+ uint32_t status;
+
+ status = r100_irq_ack(rdev);
+ if (!status) {
+ return IRQ_NONE;
+ }
+ while (status) {
+ /* SW interrupt */
+ if (status & RADEON_SW_INT_TEST) {
+ radeon_fence_process(rdev);
+ }
+ /* Vertical blank interrupts */
+ if (status & RADEON_CRTC_VBLANK_STAT) {
+ drm_handle_vblank(rdev->ddev, 0);
+ }
+ if (status & RADEON_CRTC2_VBLANK_STAT) {
+ drm_handle_vblank(rdev->ddev, 1);
+ }
+ status = r100_irq_ack(rdev);
+ }
+ return IRQ_HANDLED;
+}
+
+u32 r100_get_vblank_counter(struct radeon_device *rdev, int crtc)
+{
+ if (crtc == 0)
+ return RREG32(RADEON_CRTC_CRNT_FRAME);
+ else
+ return RREG32(RADEON_CRTC2_CRNT_FRAME);
+}
+
+
/*
* Fence emission
*/
tmp |= tile_flags;
ib[idx] = tmp;
break;
+ case RADEON_RB3D_ZPASS_ADDR:
+ r = r100_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+ idx, reg);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+ ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ break;
default:
/* FIXME: we don't want to allow anyothers packet */
break;
r100_pll_errata_after_data(rdev);
}
-uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg)
-{
- if (reg < 0x10000)
- return readl(((void __iomem *)rdev->rmmio) + reg);
- else {
- writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
- return readl(((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
- }
-}
-
-void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
-{
- if (reg < 0x10000)
- writel(v, ((void __iomem *)rdev->rmmio) + reg);
- else {
- writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
- writel(v, ((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
- }
-}
-
int r100_init(struct radeon_device *rdev)
{
return 0;
WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp | RADEON_PCIE_TX_GART_INVALIDATE_TLB);
(void)RREG32_PCIE(RADEON_PCIE_TX_GART_CNTL);
WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp);
- mb();
}
+ mb();
}
int rv370_pcie_gart_enable(struct radeon_device *rdev)
/* rv350,rv370,rv380 */
rdev->num_gb_pipes = 1;
}
+ rdev->num_z_pipes = 1;
gb_tile_config = (R300_ENABLE_TILING | R300_TILE_SIZE_16);
switch (rdev->num_gb_pipes) {
case 2:
printk(KERN_WARNING "Failed to wait MC idle while "
"programming pipes. Bad things might happen.\n");
}
- DRM_INFO("radeon: %d pipes initialized.\n", rdev->num_gb_pipes);
+ DRM_INFO("radeon: %d quad pipes, %d Z pipes initialized.\n",
+ rdev->num_gb_pipes, rdev->num_z_pipes);
}
int r300_ga_reset(struct radeon_device *rdev)
}
-/*
- * Indirect registers accessor
- */
-uint32_t rv370_pcie_rreg(struct radeon_device *rdev, uint32_t reg)
-{
- uint32_t r;
-
- WREG8(RADEON_PCIE_INDEX, ((reg) & 0xff));
- (void)RREG32(RADEON_PCIE_INDEX);
- r = RREG32(RADEON_PCIE_DATA);
- return r;
-}
-
-void rv370_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
-{
- WREG8(RADEON_PCIE_INDEX, ((reg) & 0xff));
- (void)RREG32(RADEON_PCIE_INDEX);
- WREG32(RADEON_PCIE_DATA, (v));
- (void)RREG32(RADEON_PCIE_DATA);
-}
-
/*
* PCIE Lanes
*/
tmp = (ib_chunk->kdata[idx] >> 22) & 0xF;
track->textures[i].txdepth = tmp;
break;
+ case R300_ZB_ZPASS_ADDR:
+ r = r100_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+ idx, reg);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+ ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ break;
+ case 0x4be8:
+ /* valid register only on RV530 */
+ if (p->rdev->family == CHIP_RV530)
+ break;
+ /* fallthrough do not move */
default:
printk(KERN_ERR "Forbidden register 0x%04X in cs at %d\n",
reg, idx);
printk(KERN_WARNING "Failed to wait GUI idle while "
"programming pipes. Bad things might happen.\n");
}
- DRM_INFO("radeon: %d pipes initialized.\n", rdev->num_gb_pipes);
+
+ if (rdev->family == CHIP_RV530) {
+ tmp = RREG32(RV530_GB_PIPE_SELECT2);
+ if ((tmp & 3) == 3)
+ rdev->num_z_pipes = 2;
+ else
+ rdev->num_z_pipes = 1;
+ } else
+ rdev->num_z_pipes = 1;
+
+ DRM_INFO("radeon: %d quad pipes, %d z pipes initialized.\n",
+ rdev->num_gb_pipes, rdev->num_z_pipes);
}
void r420_gpu_init(struct radeon_device *rdev)
#define AVIVO_D1CRTC_BLANK_CONTROL 0x6084
#define AVIVO_D1CRTC_INTERLACE_CONTROL 0x6088
#define AVIVO_D1CRTC_INTERLACE_STATUS 0x608c
+#define AVIVO_D1CRTC_FRAME_COUNT 0x60a4
#define AVIVO_D1CRTC_STEREO_CONTROL 0x60c4
/* master controls */
# define AVIVO_DC_LB_DISP1_END_ADR_SHIFT 4
# define AVIVO_DC_LB_DISP1_END_ADR_MASK 0x7ff
-#define R500_DxMODE_INT_MASK 0x6540
-#define R500_D1MODE_INT_MASK (1<<0)
-#define R500_D2MODE_INT_MASK (1<<8)
-
#define AVIVO_D1MODE_DATA_FORMAT 0x6528
# define AVIVO_D1MODE_INTERLEAVE_EN (1 << 0)
#define AVIVO_D1MODE_DESKTOP_HEIGHT 0x652C
+#define AVIVO_D1MODE_VBLANK_STATUS 0x6534
+# define AVIVO_VBLANK_ACK (1 << 4)
#define AVIVO_D1MODE_VLINE_START_END 0x6538
+#define AVIVO_DxMODE_INT_MASK 0x6540
+# define AVIVO_D1MODE_INT_MASK (1 << 0)
+# define AVIVO_D2MODE_INT_MASK (1 << 8)
#define AVIVO_D1MODE_VIEWPORT_START 0x6580
#define AVIVO_D1MODE_VIEWPORT_SIZE 0x6584
#define AVIVO_D1MODE_EXT_OVERSCAN_LEFT_RIGHT 0x6588
#define AVIVO_D2CRTC_BLANK_CONTROL 0x6884
#define AVIVO_D2CRTC_INTERLACE_CONTROL 0x6888
#define AVIVO_D2CRTC_INTERLACE_STATUS 0x688c
+#define AVIVO_D2CRTC_FRAME_COUNT 0x68a4
#define AVIVO_D2CRTC_STEREO_CONTROL 0x68c4
#define AVIVO_D2GRPH_ENABLE 0x6900
#define AVIVO_D2CUR_SIZE 0x6c10
#define AVIVO_D2CUR_POSITION 0x6c14
+#define AVIVO_D2MODE_VBLANK_STATUS 0x6d34
#define AVIVO_D2MODE_VLINE_START_END 0x6d38
#define AVIVO_D2MODE_VIEWPORT_START 0x6d80
#define AVIVO_D2MODE_VIEWPORT_SIZE 0x6d84
# define AVIVO_I2C_EN (1 << 0)
# define AVIVO_I2C_RESET (1 << 8)
+#define AVIVO_DISP_INTERRUPT_STATUS 0x7edc
+# define AVIVO_D1_VBLANK_INTERRUPT (1 << 4)
+# define AVIVO_D2_VBLANK_INTERRUPT (1 << 5)
+
#endif
*/
/* workaround for RV530 */
if (rdev->family == CHIP_RV530) {
- WREG32(0x4124, 1);
WREG32(0x4128, 0xFF);
}
r420_pipes_init(rdev);
uint64_t *gpu_addr);
void radeon_object_unpin(struct radeon_object *robj);
int radeon_object_wait(struct radeon_object *robj);
+int radeon_object_busy_domain(struct radeon_object *robj, uint32_t *cur_placement);
int radeon_object_evict_vram(struct radeon_device *rdev);
int radeon_object_mmap(struct radeon_object *robj, uint64_t *offset);
void radeon_object_force_delete(struct radeon_device *rdev);
void (*ring_start)(struct radeon_device *rdev);
int (*irq_set)(struct radeon_device *rdev);
int (*irq_process)(struct radeon_device *rdev);
+ u32 (*get_vblank_counter)(struct radeon_device *rdev, int crtc);
void (*fence_ring_emit)(struct radeon_device *rdev, struct radeon_fence *fence);
int (*cs_parse)(struct radeon_cs_parser *p);
int (*copy_blit)(struct radeon_device *rdev,
int usec_timeout;
enum radeon_pll_errata pll_errata;
int num_gb_pipes;
+ int num_z_pipes;
int disp_priority;
/* BIOS */
uint8_t *bios;
resource_size_t rmmio_base;
resource_size_t rmmio_size;
void *rmmio;
- radeon_rreg_t mm_rreg;
- radeon_wreg_t mm_wreg;
radeon_rreg_t mc_rreg;
radeon_wreg_t mc_wreg;
radeon_rreg_t pll_rreg;
radeon_wreg_t pll_wreg;
- radeon_rreg_t pcie_rreg;
- radeon_wreg_t pcie_wreg;
+ uint32_t pcie_reg_mask;
radeon_rreg_t pciep_rreg;
radeon_wreg_t pciep_wreg;
struct radeon_clock clock;
void radeon_device_fini(struct radeon_device *rdev);
int radeon_gpu_wait_for_idle(struct radeon_device *rdev);
+static inline uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+ if (reg < 0x10000)
+ return readl(((void __iomem *)rdev->rmmio) + reg);
+ else {
+ writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
+ return readl(((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
+ }
+}
+
+static inline void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+ if (reg < 0x10000)
+ writel(v, ((void __iomem *)rdev->rmmio) + reg);
+ else {
+ writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
+ writel(v, ((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
+ }
+}
+
/*
* Registers read & write functions.
*/
#define RREG8(reg) readb(((void __iomem *)rdev->rmmio) + (reg))
#define WREG8(reg, v) writeb(v, ((void __iomem *)rdev->rmmio) + (reg))
-#define RREG32(reg) rdev->mm_rreg(rdev, (reg))
-#define WREG32(reg, v) rdev->mm_wreg(rdev, (reg), (v))
+#define RREG32(reg) r100_mm_rreg(rdev, (reg))
+#define WREG32(reg, v) r100_mm_wreg(rdev, (reg), (v))
#define REG_SET(FIELD, v) (((v) << FIELD##_SHIFT) & FIELD##_MASK)
#define REG_GET(FIELD, v) (((v) << FIELD##_SHIFT) & FIELD##_MASK)
#define RREG32_PLL(reg) rdev->pll_rreg(rdev, (reg))
#define WREG32_PLL(reg, v) rdev->pll_wreg(rdev, (reg), (v))
#define RREG32_MC(reg) rdev->mc_rreg(rdev, (reg))
#define WREG32_MC(reg, v) rdev->mc_wreg(rdev, (reg), (v))
-#define RREG32_PCIE(reg) rdev->pcie_rreg(rdev, (reg))
-#define WREG32_PCIE(reg, v) rdev->pcie_wreg(rdev, (reg), (v))
+#define RREG32_PCIE(reg) rv370_pcie_rreg(rdev, (reg))
+#define WREG32_PCIE(reg, v) rv370_pcie_wreg(rdev, (reg), (v))
#define WREG32_P(reg, val, mask) \
do { \
uint32_t tmp_ = RREG32(reg); \
WREG32_PLL(reg, tmp_); \
} while (0)
+/*
+ * Indirect registers accessor
+ */
+static inline uint32_t rv370_pcie_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+ uint32_t r;
+
+ WREG32(RADEON_PCIE_INDEX, ((reg) & rdev->pcie_reg_mask));
+ r = RREG32(RADEON_PCIE_DATA);
+ return r;
+}
+
+static inline void rv370_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+ WREG32(RADEON_PCIE_INDEX, ((reg) & rdev->pcie_reg_mask));
+ WREG32(RADEON_PCIE_DATA, (v));
+}
+
void r100_pll_errata_after_index(struct radeon_device *rdev);
#define radeon_ring_start(rdev) (rdev)->asic->ring_start((rdev))
#define radeon_irq_set(rdev) (rdev)->asic->irq_set((rdev))
#define radeon_irq_process(rdev) (rdev)->asic->irq_process((rdev))
+#define radeon_get_vblank_counter(rdev, crtc) (rdev)->asic->get_vblank_counter((rdev), (crtc))
#define radeon_fence_ring_emit(rdev, fence) (rdev)->asic->fence_ring_emit((rdev), (fence))
#define radeon_copy_blit(rdev, s, d, np, f) (rdev)->asic->copy_blit((rdev), (s), (d), (np), (f))
#define radeon_copy_dma(rdev, s, d, np, f) (rdev)->asic->copy_dma((rdev), (s), (d), (np), (f))
int r100_gpu_reset(struct radeon_device *rdev);
int r100_mc_init(struct radeon_device *rdev);
void r100_mc_fini(struct radeon_device *rdev);
+u32 r100_get_vblank_counter(struct radeon_device *rdev, int crtc);
int r100_wb_init(struct radeon_device *rdev);
void r100_wb_fini(struct radeon_device *rdev);
int r100_gart_enable(struct radeon_device *rdev);
.ring_start = &r100_ring_start,
.irq_set = &r100_irq_set,
.irq_process = &r100_irq_process,
+ .get_vblank_counter = &r100_get_vblank_counter,
.fence_ring_emit = &r100_fence_ring_emit,
.cs_parse = &r100_cs_parse,
.copy_blit = &r100_copy_blit,
.ring_start = &r300_ring_start,
.irq_set = &r100_irq_set,
.irq_process = &r100_irq_process,
+ .get_vblank_counter = &r100_get_vblank_counter,
.fence_ring_emit = &r300_fence_ring_emit,
.cs_parse = &r300_cs_parse,
.copy_blit = &r100_copy_blit,
.ring_start = &r300_ring_start,
.irq_set = &r100_irq_set,
.irq_process = &r100_irq_process,
+ .get_vblank_counter = &r100_get_vblank_counter,
.fence_ring_emit = &r300_fence_ring_emit,
.cs_parse = &r300_cs_parse,
.copy_blit = &r100_copy_blit,
.ring_start = &r300_ring_start,
.irq_set = &r100_irq_set,
.irq_process = &r100_irq_process,
+ .get_vblank_counter = &r100_get_vblank_counter,
.fence_ring_emit = &r300_fence_ring_emit,
.cs_parse = &r300_cs_parse,
.copy_blit = &r100_copy_blit,
int rs600_mc_init(struct radeon_device *rdev);
void rs600_mc_fini(struct radeon_device *rdev);
int rs600_irq_set(struct radeon_device *rdev);
+int rs600_irq_process(struct radeon_device *rdev);
+u32 rs600_get_vblank_counter(struct radeon_device *rdev, int crtc);
int rs600_gart_enable(struct radeon_device *rdev);
void rs600_gart_disable(struct radeon_device *rdev);
void rs600_gart_tlb_flush(struct radeon_device *rdev);
.cp_disable = &r100_cp_disable,
.ring_start = &r300_ring_start,
.irq_set = &rs600_irq_set,
- .irq_process = &r100_irq_process,
+ .irq_process = &rs600_irq_process,
+ .get_vblank_counter = &rs600_get_vblank_counter,
.fence_ring_emit = &r300_fence_ring_emit,
.cs_parse = &r300_cs_parse,
.copy_blit = &r100_copy_blit,
/*
* rs690,rs740
*/
+int rs690_init(struct radeon_device *rdev);
void rs690_errata(struct radeon_device *rdev);
void rs690_vram_info(struct radeon_device *rdev);
int rs690_mc_init(struct radeon_device *rdev);
void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
void rs690_bandwidth_update(struct radeon_device *rdev);
static struct radeon_asic rs690_asic = {
- .init = &r300_init,
+ .init = &rs690_init,
.errata = &rs690_errata,
.vram_info = &rs690_vram_info,
.gpu_reset = &r300_gpu_reset,
.cp_disable = &r100_cp_disable,
.ring_start = &r300_ring_start,
.irq_set = &rs600_irq_set,
- .irq_process = &r100_irq_process,
+ .irq_process = &rs600_irq_process,
+ .get_vblank_counter = &rs600_get_vblank_counter,
.fence_ring_emit = &r300_fence_ring_emit,
.cs_parse = &r300_cs_parse,
.copy_blit = &r100_copy_blit,
.cp_fini = &r100_cp_fini,
.cp_disable = &r100_cp_disable,
.ring_start = &rv515_ring_start,
- .irq_set = &r100_irq_set,
- .irq_process = &r100_irq_process,
+ .irq_set = &rs600_irq_set,
+ .irq_process = &rs600_irq_process,
+ .get_vblank_counter = &rs600_get_vblank_counter,
.fence_ring_emit = &r300_fence_ring_emit,
.cs_parse = &r300_cs_parse,
.copy_blit = &r100_copy_blit,
.cp_fini = &r100_cp_fini,
.cp_disable = &r100_cp_disable,
.ring_start = &rv515_ring_start,
- .irq_set = &r100_irq_set,
- .irq_process = &r100_irq_process,
+ .irq_set = &rs600_irq_set,
+ .irq_process = &rs600_irq_process,
+ .get_vblank_counter = &rs600_get_vblank_counter,
.fence_ring_emit = &r300_fence_ring_emit,
.cs_parse = &r300_cs_parse,
.copy_blit = &r100_copy_blit,
0x00780000, /* rs480 */
};
-static struct radeon_encoder_tv_dac
- *radeon_legacy_get_tv_dac_info_from_table(struct radeon_device *rdev)
+static void radeon_legacy_get_tv_dac_info_from_table(struct radeon_device *rdev,
+ struct radeon_encoder_tv_dac *tv_dac)
{
- struct radeon_encoder_tv_dac *tv_dac = NULL;
-
- tv_dac = kzalloc(sizeof(struct radeon_encoder_tv_dac), GFP_KERNEL);
-
- if (!tv_dac)
- return NULL;
-
tv_dac->ps2_tvdac_adj = default_tvdac_adj[rdev->family];
if ((rdev->flags & RADEON_IS_MOBILITY) && (rdev->family == CHIP_RV250))
tv_dac->ps2_tvdac_adj = 0x00880000;
tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj;
tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj;
-
- return tv_dac;
+ return;
}
struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct
uint16_t dac_info;
uint8_t rev, bg, dac;
struct radeon_encoder_tv_dac *tv_dac = NULL;
+ int found = 0;
+
+ tv_dac = kzalloc(sizeof(struct radeon_encoder_tv_dac), GFP_KERNEL);
+ if (!tv_dac)
+ return NULL;
if (rdev->bios == NULL)
- return radeon_legacy_get_tv_dac_info_from_table(rdev);
+ goto out;
/* first check TV table */
dac_info = combios_get_table_offset(dev, COMBIOS_TV_INFO_TABLE);
if (dac_info) {
- tv_dac =
- kzalloc(sizeof(struct radeon_encoder_tv_dac), GFP_KERNEL);
-
- if (!tv_dac)
- return NULL;
-
rev = RBIOS8(dac_info + 0x3);
if (rev > 4) {
bg = RBIOS8(dac_info + 0xc) & 0xf;
bg = RBIOS8(dac_info + 0x10) & 0xf;
dac = RBIOS8(dac_info + 0x11) & 0xf;
tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20);
+ found = 1;
} else if (rev > 1) {
bg = RBIOS8(dac_info + 0xc) & 0xf;
dac = (RBIOS8(dac_info + 0xc) >> 4) & 0xf;
bg = RBIOS8(dac_info + 0xe) & 0xf;
dac = (RBIOS8(dac_info + 0xe) >> 4) & 0xf;
tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20);
+ found = 1;
}
-
tv_dac->tv_std = radeon_combios_get_tv_info(encoder);
-
- } else {
+ }
+ if (!found) {
/* then check CRT table */
dac_info =
combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE);
if (dac_info) {
- tv_dac =
- kzalloc(sizeof(struct radeon_encoder_tv_dac),
- GFP_KERNEL);
-
- if (!tv_dac)
- return NULL;
-
rev = RBIOS8(dac_info) & 0x3;
if (rev < 2) {
bg = RBIOS8(dac_info + 0x3) & 0xf;
(bg << 16) | (dac << 20);
tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj;
tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj;
+ found = 1;
} else {
bg = RBIOS8(dac_info + 0x4) & 0xf;
dac = RBIOS8(dac_info + 0x5) & 0xf;
(bg << 16) | (dac << 20);
tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj;
tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj;
+ found = 1;
}
} else {
DRM_INFO("No TV DAC info found in BIOS\n");
- return radeon_legacy_get_tv_dac_info_from_table(rdev);
}
}
+out:
+ if (!found) /* fallback to defaults */
+ radeon_legacy_get_tv_dac_info_from_table(rdev, tv_dac);
+
return tv_dac;
}
{
uint32_t gb_tile_config, gb_pipe_sel = 0;
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV530) {
+ uint32_t z_pipe_sel = RADEON_READ(RV530_GB_PIPE_SELECT2);
+ if ((z_pipe_sel & 3) == 3)
+ dev_priv->num_z_pipes = 2;
+ else
+ dev_priv->num_z_pipes = 1;
+ } else
+ dev_priv->num_z_pipes = 1;
+
/* RS4xx/RS6xx/R4xx/R5xx */
if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R420) {
gb_pipe_sel = RADEON_READ(R400_GB_PIPE_SELECT);
void radeon_register_accessor_init(struct radeon_device *rdev)
{
- rdev->mm_rreg = &r100_mm_rreg;
- rdev->mm_wreg = &r100_mm_wreg;
rdev->mc_rreg = &radeon_invalid_rreg;
rdev->mc_wreg = &radeon_invalid_wreg;
rdev->pll_rreg = &radeon_invalid_rreg;
rdev->pll_wreg = &radeon_invalid_wreg;
- rdev->pcie_rreg = &radeon_invalid_rreg;
- rdev->pcie_wreg = &radeon_invalid_wreg;
rdev->pciep_rreg = &radeon_invalid_rreg;
rdev->pciep_wreg = &radeon_invalid_wreg;
/* Don't change order as we are overridding accessor. */
if (rdev->family < CHIP_RV515) {
- rdev->pcie_rreg = &rv370_pcie_rreg;
- rdev->pcie_wreg = &rv370_pcie_wreg;
- }
- if (rdev->family >= CHIP_RV515) {
- rdev->pcie_rreg = &rv515_pcie_rreg;
- rdev->pcie_wreg = &rv515_pcie_wreg;
+ rdev->pcie_reg_mask = 0xff;
+ } else {
+ rdev->pcie_reg_mask = 0x7ff;
}
/* FIXME: not sure here */
if (rdev->family <= CHIP_R580) {
* 1.28- Add support for VBL on CRTC2
* 1.29- R500 3D cmd buffer support
* 1.30- Add support for occlusion queries
+ * 1.31- Add support for num Z pipes from GET_PARAM
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 30
+#define DRIVER_MINOR 31
#define DRIVER_PATCHLEVEL 0
/*
resource_size_t fb_aper_offset;
int num_gb_pipes;
+ int num_z_pipes;
int track_flush;
drm_local_map_t *mmio;
/* pipe config regs */
#define R400_GB_PIPE_SELECT 0x402c
+#define RV530_GB_PIPE_SELECT2 0x4124
#define R500_DYN_SCLK_PWMEM_PIPE 0x000d /* PLL */
#define R300_GB_TILE_CONFIG 0x4018
# define R300_ENABLE_TILING (1 << 0)
goto out_unref;
}
+ memset_io(fbptr, 0, aligned_size);
+
strcpy(info->fix.id, "radeondrmfb");
info->fix.type = FB_TYPE_PACKED_PIXELS;
info->fix.visual = FB_VISUAL_TRUECOLOR;
int radeon_gem_busy_ioctl(struct drm_device *dev, void *data,
struct drm_file *filp)
{
- /* FIXME: implement */
- return 0;
+ struct drm_radeon_gem_busy *args = data;
+ struct drm_gem_object *gobj;
+ struct radeon_object *robj;
+ int r;
+ uint32_t cur_placement;
+
+ gobj = drm_gem_object_lookup(dev, filp, args->handle);
+ if (gobj == NULL) {
+ return -EINVAL;
+ }
+ robj = gobj->driver_private;
+ r = radeon_object_busy_domain(robj, &cur_placement);
+ switch (cur_placement) {
+ case TTM_PL_VRAM:
+ args->domain = RADEON_GEM_DOMAIN_VRAM;
+ break;
+ case TTM_PL_TT:
+ args->domain = RADEON_GEM_DOMAIN_GTT;
+ break;
+ case TTM_PL_SYSTEM:
+ args->domain = RADEON_GEM_DOMAIN_CPU;
+ default:
+ break;
+ }
+ mutex_lock(&dev->struct_mutex);
+ drm_gem_object_unreference(gobj);
+ mutex_unlock(&dev->struct_mutex);
+ return r;
}
int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
#include "radeon.h"
#include "atom.h"
-static inline uint32_t r100_irq_ack(struct radeon_device *rdev)
-{
- uint32_t irqs = RREG32(RADEON_GEN_INT_STATUS);
- uint32_t irq_mask = RADEON_SW_INT_TEST;
-
- if (irqs) {
- WREG32(RADEON_GEN_INT_STATUS, irqs);
- }
- return irqs & irq_mask;
-}
-
-int r100_irq_set(struct radeon_device *rdev)
-{
- uint32_t tmp = 0;
-
- if (rdev->irq.sw_int) {
- tmp |= RADEON_SW_INT_ENABLE;
- }
- /* Todo go through CRTC and enable vblank int or not */
- WREG32(RADEON_GEN_INT_CNTL, tmp);
- return 0;
-}
-
-int r100_irq_process(struct radeon_device *rdev)
-{
- uint32_t status;
-
- status = r100_irq_ack(rdev);
- if (!status) {
- return IRQ_NONE;
- }
- while (status) {
- /* SW interrupt */
- if (status & RADEON_SW_INT_TEST) {
- radeon_fence_process(rdev);
- }
- status = r100_irq_ack(rdev);
- }
- return IRQ_HANDLED;
-}
-
-int rs600_irq_set(struct radeon_device *rdev)
-{
- uint32_t tmp = 0;
-
- if (rdev->irq.sw_int) {
- tmp |= RADEON_SW_INT_ENABLE;
- }
- WREG32(RADEON_GEN_INT_CNTL, tmp);
- /* Todo go through CRTC and enable vblank int or not */
- WREG32(R500_DxMODE_INT_MASK, 0);
- return 0;
-}
-
irqreturn_t radeon_driver_irq_handler_kms(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
case RADEON_INFO_NUM_GB_PIPES:
value = rdev->num_gb_pipes;
break;
+ case RADEON_INFO_NUM_Z_PIPES:
+ value = rdev->num_z_pipes;
+ break;
default:
DRM_DEBUG("Invalid request %d\n", info->request);
return -EINVAL;
*/
u32 radeon_get_vblank_counter_kms(struct drm_device *dev, int crtc)
{
- /* FIXME: implement */
- return 0;
+ struct radeon_device *rdev = dev->dev_private;
+
+ if (crtc < 0 || crtc > 1) {
+ DRM_ERROR("Invalid crtc %d\n", crtc);
+ return -EINVAL;
+ }
+
+ return radeon_get_vblank_counter(rdev, crtc);
}
int radeon_enable_vblank_kms(struct drm_device *dev, int crtc)
{
- /* FIXME: implement */
- return 0;
+ struct radeon_device *rdev = dev->dev_private;
+
+ if (crtc < 0 || crtc > 1) {
+ DRM_ERROR("Invalid crtc %d\n", crtc);
+ return -EINVAL;
+ }
+
+ rdev->irq.crtc_vblank_int[crtc] = true;
+
+ return radeon_irq_set(rdev);
}
void radeon_disable_vblank_kms(struct drm_device *dev, int crtc)
{
- /* FIXME: implement */
+ struct radeon_device *rdev = dev->dev_private;
+
+ if (crtc < 0 || crtc > 1) {
+ DRM_ERROR("Invalid crtc %d\n", crtc);
+ return;
+ }
+
+ rdev->irq.crtc_vblank_int[crtc] = false;
+
+ radeon_irq_set(rdev);
}
DRM_IOCTL_DEF(DRM_RADEON_INFO, radeon_info_ioctl, DRM_AUTH),
DRM_IOCTL_DEF(DRM_RADEON_GEM_SET_TILING, radeon_gem_set_tiling_ioctl, DRM_AUTH),
DRM_IOCTL_DEF(DRM_RADEON_GEM_GET_TILING, radeon_gem_get_tiling_ioctl, DRM_AUTH),
+ DRM_IOCTL_DEF(DRM_RADEON_GEM_BUSY, radeon_gem_busy_ioctl, DRM_AUTH),
};
int radeon_max_kms_ioctl = DRM_ARRAY_SIZE(radeon_ioctls_kms);
RADEON_CRTC_DISP_REQ_EN_B));
WREG32_P(RADEON_CRTC_EXT_CNTL, 0, ~mask);
}
+ drm_vblank_post_modeset(dev, radeon_crtc->crtc_id);
+ radeon_crtc_load_lut(crtc);
break;
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
case DRM_MODE_DPMS_OFF:
+ drm_vblank_pre_modeset(dev, radeon_crtc->crtc_id);
if (radeon_crtc->crtc_id)
WREG32_P(RADEON_CRTC2_GEN_CNTL, mask, ~mask);
else {
}
break;
}
-
- if (mode != DRM_MODE_DPMS_OFF) {
- radeon_crtc_load_lut(crtc);
- }
}
/* properly set crtc bpp when using atombios */
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+ encoder->possible_crtcs = 0x1;
drm_encoder_init(dev, encoder, &radeon_legacy_lvds_enc_funcs, DRM_MODE_ENCODER_LVDS);
drm_encoder_helper_add(encoder, &radeon_legacy_lvds_helper_funcs);
if (rdev->is_atom_bios)
return r;
}
+int radeon_object_busy_domain(struct radeon_object *robj, uint32_t *cur_placement)
+{
+ int r = 0;
+
+ r = radeon_object_reserve(robj, true);
+ if (unlikely(r != 0)) {
+ DRM_ERROR("radeon: failed to reserve object for waiting.\n");
+ return r;
+ }
+ spin_lock(&robj->tobj.lock);
+ *cur_placement = robj->tobj.mem.mem_type;
+ if (robj->tobj.sync_obj) {
+ r = ttm_bo_wait(&robj->tobj, true, true, true);
+ }
+ spin_unlock(&robj->tobj.lock);
+ radeon_object_unreserve(robj);
+ return r;
+}
+
int radeon_object_evict_vram(struct radeon_device *rdev)
{
if (rdev->flags & RADEON_IS_IGP) {
# define RS400_TMDS2_PLLRST (1 << 1)
#define RADEON_GEN_INT_CNTL 0x0040
+# define RADEON_CRTC_VBLANK_MASK (1 << 0)
+# define RADEON_CRTC2_VBLANK_MASK (1 << 9)
# define RADEON_SW_INT_ENABLE (1 << 25)
#define RADEON_GEN_INT_STATUS 0x0044
-# define RADEON_VSYNC_INT_AK (1 << 2)
-# define RADEON_VSYNC_INT (1 << 2)
-# define RADEON_VSYNC2_INT_AK (1 << 6)
-# define RADEON_VSYNC2_INT (1 << 6)
+# define AVIVO_DISPLAY_INT_STATUS (1 << 0)
+# define RADEON_CRTC_VBLANK_STAT (1 << 0)
+# define RADEON_CRTC_VBLANK_STAT_ACK (1 << 0)
+# define RADEON_CRTC2_VBLANK_STAT (1 << 9)
+# define RADEON_CRTC2_VBLANK_STAT_ACK (1 << 9)
# define RADEON_SW_INT_FIRE (1 << 26)
# define RADEON_SW_INT_TEST (1 << 25)
# define RADEON_SW_INT_TEST_ACK (1 << 25)
# define RADEON_RE_WIDTH_SHIFT 0
# define RADEON_RE_HEIGHT_SHIFT 16
+#define RADEON_RB3D_ZPASS_DATA 0x3290
+#define RADEON_RB3D_ZPASS_ADDR 0x3294
+
#define RADEON_SE_CNTL 0x1c4c
# define RADEON_FFACE_CULL_CW (0 << 0)
# define RADEON_FFACE_CULL_CCW (1 << 0)
#define RADEON_SCRATCH_REG4 0x15f0
#define RADEON_SCRATCH_REG5 0x15f4
+#define RV530_GB_PIPE_SELECT2 0x4124
+
#endif
case RADEON_PARAM_NUM_GB_PIPES:
value = dev_priv->num_gb_pipes;
break;
+ case RADEON_PARAM_NUM_Z_PIPES:
+ value = dev_priv->num_z_pipes;
+ break;
default:
DRM_DEBUG("Invalid parameter %d\n", param->param);
return -EINVAL;
}
+/*
+ * Interrupts
+ */
+int rs600_irq_set(struct radeon_device *rdev)
+{
+ uint32_t tmp = 0;
+ uint32_t mode_int = 0;
+
+ if (rdev->irq.sw_int) {
+ tmp |= RADEON_SW_INT_ENABLE;
+ }
+ if (rdev->irq.crtc_vblank_int[0]) {
+ tmp |= AVIVO_DISPLAY_INT_STATUS;
+ mode_int |= AVIVO_D1MODE_INT_MASK;
+ }
+ if (rdev->irq.crtc_vblank_int[1]) {
+ tmp |= AVIVO_DISPLAY_INT_STATUS;
+ mode_int |= AVIVO_D2MODE_INT_MASK;
+ }
+ WREG32(RADEON_GEN_INT_CNTL, tmp);
+ WREG32(AVIVO_DxMODE_INT_MASK, mode_int);
+ return 0;
+}
+
+static inline uint32_t rs600_irq_ack(struct radeon_device *rdev, u32 *r500_disp_int)
+{
+ uint32_t irqs = RREG32(RADEON_GEN_INT_STATUS);
+ uint32_t irq_mask = RADEON_SW_INT_TEST;
+
+ if (irqs & AVIVO_DISPLAY_INT_STATUS) {
+ *r500_disp_int = RREG32(AVIVO_DISP_INTERRUPT_STATUS);
+ if (*r500_disp_int & AVIVO_D1_VBLANK_INTERRUPT) {
+ WREG32(AVIVO_D1MODE_VBLANK_STATUS, AVIVO_VBLANK_ACK);
+ }
+ if (*r500_disp_int & AVIVO_D2_VBLANK_INTERRUPT) {
+ WREG32(AVIVO_D2MODE_VBLANK_STATUS, AVIVO_VBLANK_ACK);
+ }
+ } else {
+ *r500_disp_int = 0;
+ }
+
+ if (irqs) {
+ WREG32(RADEON_GEN_INT_STATUS, irqs);
+ }
+ return irqs & irq_mask;
+}
+
+int rs600_irq_process(struct radeon_device *rdev)
+{
+ uint32_t status;
+ uint32_t r500_disp_int;
+
+ status = rs600_irq_ack(rdev, &r500_disp_int);
+ if (!status && !r500_disp_int) {
+ return IRQ_NONE;
+ }
+ while (status || r500_disp_int) {
+ /* SW interrupt */
+ if (status & RADEON_SW_INT_TEST) {
+ radeon_fence_process(rdev);
+ }
+ /* Vertical blank interrupts */
+ if (r500_disp_int & AVIVO_D1_VBLANK_INTERRUPT) {
+ drm_handle_vblank(rdev->ddev, 0);
+ }
+ if (r500_disp_int & AVIVO_D2_VBLANK_INTERRUPT) {
+ drm_handle_vblank(rdev->ddev, 1);
+ }
+ status = rs600_irq_ack(rdev, &r500_disp_int);
+ }
+ return IRQ_HANDLED;
+}
+
+u32 rs600_get_vblank_counter(struct radeon_device *rdev, int crtc)
+{
+ if (crtc == 0)
+ return RREG32(AVIVO_D1CRTC_FRAME_COUNT);
+ else
+ return RREG32(AVIVO_D2CRTC_FRAME_COUNT);
+}
+
+
/*
* Global GPU functions
*/
WREG32(RS690_MC_DATA, v);
WREG32(RS690_MC_INDEX, RS690_MC_INDEX_WR_ACK);
}
+
+static const unsigned rs690_reg_safe_bm[219] = {
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0x17FF1FFF,0xFFFFFFFC,0xFFFFFFFF,0xFF30FFBF,
+ 0xFFFFFFF8,0xC3E6FFFF,0xFFFFF6DF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFF03F,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFEFCE,0xF00EBFFF,0x007C0000,
+ 0xF0000078,0xFF000009,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFF7FF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFC78,0xFFFFFFFF,0xFFFFFFFE,0xFFFFFFFF,
+ 0x38FF8F50,0xFFF88082,0xF000000C,0xFAE009FF,
+ 0x0000FFFF,0xFFFFFFFF,0xFFFFFFFF,0x00000000,
+ 0x00000000,0x0000C100,0x00000000,0x00000000,
+ 0x00000000,0x00000000,0x00000000,0x00000000,
+ 0x00000000,0xFFFF0000,0xFFFFFFFF,0xFF80FFFF,
+ 0x00000000,0x00000000,0x00000000,0x00000000,
+ 0x0003FC01,0xFFFFFFF8,0xFE800B19,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+ 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+};
+
+int rs690_init(struct radeon_device *rdev)
+{
+ rdev->config.r300.reg_safe_bm = rs690_reg_safe_bm;
+ rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(rs690_reg_safe_bm);
+ return 0;
+}
WREG32(MC_IND_INDEX, 0);
}
-uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg)
-{
- uint32_t r;
-
- WREG32(PCIE_INDEX, ((reg) & 0x7ff));
- (void)RREG32(PCIE_INDEX);
- r = RREG32(PCIE_DATA);
- return r;
-}
-
-void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
-{
- WREG32(PCIE_INDEX, ((reg) & 0x7ff));
- (void)RREG32(PCIE_INDEX);
- WREG32(PCIE_DATA, (v));
- (void)RREG32(PCIE_DATA);
-}
-
-
/*
* Debugfs info
*/
err = 0;
complete:
- omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
+ /*
+ * Ack the stat in one go, but [R/X]DR and [R/X]RDY should be
+ * acked after the data operation is complete.
+ * Ref: TRM SWPU114Q Figure 18-31
+ */
+ omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat &
+ ~(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
+ OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
if (stat & OMAP_I2C_STAT_NACK) {
err |= OMAP_I2C_STAT_NACK;
}
if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
OMAP_I2C_STAT_AL)) {
+ omap_i2c_ack_stat(dev, stat &
+ (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
+ OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
omap_i2c_complete_cmd(dev, err);
return IRQ_HANDLED;
}
* memory to the I2C interface.
*/
- if (cpu_is_omap34xx()) {
+ if (dev->rev <= OMAP_I2C_REV_ON_3430) {
while (!(stat & OMAP_I2C_STAT_XUDF)) {
if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
STU300_ERROR_NONE = 0,
STU300_ERROR_ACKNOWLEDGE_FAILURE,
STU300_ERROR_BUS_ERROR,
- STU300_ERROR_ARBITRATION_LOST
+ STU300_ERROR_ARBITRATION_LOST,
+ STU300_ERROR_UNKNOWN
};
/* timeout waiting for the controller to respond */
* The number of address send athemps tried before giving up.
* If the first one failes it seems like 5 to 8 attempts are required.
*/
-#define NUM_ADDR_RESEND_ATTEMPTS 10
+#define NUM_ADDR_RESEND_ATTEMPTS 12
/* I2C clock speed, in Hz 0-400kHz*/
static unsigned int scl_frequency = 100000;
* @msg_index: index of current message
* @msg_len: length of current message
*/
+
struct stu300_dev {
struct platform_device *pdev;
struct i2c_adapter adapter;
return readl(address) & 0x000000FFU;
}
+static void stu300_irq_enable(struct stu300_dev *dev)
+{
+ u32 val;
+ val = stu300_r8(dev->virtbase + I2C_CR);
+ val |= I2C_CR_INTERRUPT_ENABLE;
+ /* Twice paranoia (possible HW glitch) */
+ stu300_wr8(val, dev->virtbase + I2C_CR);
+ stu300_wr8(val, dev->virtbase + I2C_CR);
+}
+
+static void stu300_irq_disable(struct stu300_dev *dev)
+{
+ u32 val;
+ val = stu300_r8(dev->virtbase + I2C_CR);
+ val &= ~I2C_CR_INTERRUPT_ENABLE;
+ /* Twice paranoia (possible HW glitch) */
+ stu300_wr8(val, dev->virtbase + I2C_CR);
+ stu300_wr8(val, dev->virtbase + I2C_CR);
+}
+
+
/*
* Tells whether a certain event or events occurred in
* response to a command. The events represent states in
* documentation and can only be treated as abstract state
* machine states.
*
- * @ret 0 = event has not occurred, any other value means
- * the event occurred.
+ * @ret 0 = event has not occurred or unknown error, any
+ * other value means the correct event occurred or an error.
*/
+
static int stu300_event_occurred(struct stu300_dev *dev,
enum stu300_event mr_event) {
u32 status1;
/* What event happened? */
status1 = stu300_r8(dev->virtbase + I2C_SR1);
+
if (!(status1 & I2C_SR1_EVF_IND))
/* No event at all */
return 0;
+
status2 = stu300_r8(dev->virtbase + I2C_SR2);
+ /* Block any multiple interrupts */
+ stu300_irq_disable(dev);
+
+ /* Check for errors first */
+ if (status2 & I2C_SR2_AF_IND) {
+ dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE;
+ return 1;
+ } else if (status2 & I2C_SR2_BERR_IND) {
+ dev->cmd_err = STU300_ERROR_BUS_ERROR;
+ return 1;
+ } else if (status2 & I2C_SR2_ARLO_IND) {
+ dev->cmd_err = STU300_ERROR_ARBITRATION_LOST;
+ return 1;
+ }
+
switch (mr_event) {
case STU300_EVENT_1:
if (status1 & I2C_SR1_ADSL_IND)
case STU300_EVENT_7:
case STU300_EVENT_8:
if (status1 & I2C_SR1_BTF_IND) {
- if (status2 & I2C_SR2_AF_IND)
- dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE;
- else if (status2 & I2C_SR2_BERR_IND)
- dev->cmd_err = STU300_ERROR_BUS_ERROR;
return 1;
}
break;
case STU300_EVENT_6:
if (status2 & I2C_SR2_ENDAD_IND) {
/* First check for any errors */
- if (status2 & I2C_SR2_AF_IND)
- dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE;
return 1;
}
break;
default:
break;
}
- if (status2 & I2C_SR2_ARLO_IND)
- dev->cmd_err = STU300_ERROR_ARBITRATION_LOST;
+ /* If we get here, we're on thin ice.
+ * Here we are in a status where we have
+ * gotten a response that does not match
+ * what we requested.
+ */
+ dev->cmd_err = STU300_ERROR_UNKNOWN;
+ dev_err(&dev->pdev->dev,
+ "Unhandled interrupt! %d sr1: 0x%x sr2: 0x%x\n",
+ mr_event, status1, status2);
return 0;
}
struct stu300_dev *dev = data;
int res;
+ /* Just make sure that the block is clocked */
+ clk_enable(dev->clk);
+
/* See if this was what we were waiting for */
spin_lock(&dev->cmd_issue_lock);
- if (dev->cmd_event != STU300_EVENT_NONE) {
- res = stu300_event_occurred(dev, dev->cmd_event);
- if (res || dev->cmd_err != STU300_ERROR_NONE) {
- u32 val;
-
- complete(&dev->cmd_complete);
- /* Block any multiple interrupts */
- val = stu300_r8(dev->virtbase + I2C_CR);
- val &= ~I2C_CR_INTERRUPT_ENABLE;
- stu300_wr8(val, dev->virtbase + I2C_CR);
- }
- }
+
+ res = stu300_event_occurred(dev, dev->cmd_event);
+ if (res || dev->cmd_err != STU300_ERROR_NONE)
+ complete(&dev->cmd_complete);
+
spin_unlock(&dev->cmd_issue_lock);
+
+ clk_disable(dev->clk);
+
return IRQ_HANDLED;
}
stu300_wr8(cr_value, dev->virtbase + I2C_CR);
ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
STU300_TIMEOUT);
-
if (ret < 0) {
dev_err(&dev->pdev->dev,
"wait_for_completion_interruptible_timeout() "
enum stu300_event mr_event)
{
int ret;
- u32 val;
if (unlikely(irqs_disabled())) {
/* TODO: implement polling for this case if need be. */
/* Is it already here? */
spin_lock_irq(&dev->cmd_issue_lock);
dev->cmd_err = STU300_ERROR_NONE;
- if (stu300_event_occurred(dev, mr_event)) {
- spin_unlock_irq(&dev->cmd_issue_lock);
- goto exit_await_check_err;
- }
- init_completion(&dev->cmd_complete);
- dev->cmd_err = STU300_ERROR_NONE;
dev->cmd_event = mr_event;
- /* Turn on the I2C interrupt for current operation */
- val = stu300_r8(dev->virtbase + I2C_CR);
- val |= I2C_CR_INTERRUPT_ENABLE;
- stu300_wr8(val, dev->virtbase + I2C_CR);
-
- /* Twice paranoia (possible HW glitch) */
- stu300_wr8(val, dev->virtbase + I2C_CR);
+ init_completion(&dev->cmd_complete);
- /* Check again: is it already here? */
- if (unlikely(stu300_event_occurred(dev, mr_event))) {
- /* Disable IRQ again. */
- val &= ~I2C_CR_INTERRUPT_ENABLE;
- stu300_wr8(val, dev->virtbase + I2C_CR);
- spin_unlock_irq(&dev->cmd_issue_lock);
- goto exit_await_check_err;
- }
+ /* Turn on the I2C interrupt for current operation */
+ stu300_irq_enable(dev);
/* Unlock the command block and wait for the event to occur */
spin_unlock_irq(&dev->cmd_issue_lock);
+
ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
STU300_TIMEOUT);
-
if (ret < 0) {
dev_err(&dev->pdev->dev,
"wait_for_completion_interruptible_timeout()"
return -ETIMEDOUT;
}
- exit_await_check_err:
if (dev->cmd_err != STU300_ERROR_NONE) {
if (mr_event != STU300_EVENT_6) {
dev_err(&dev->pdev->dev, "controller "
};
static const struct stu300_clkset stu300_clktable[] = {
- { 0, 0xFFU },
- { 2500000, I2C_OAR2_FR_25_10MHZ },
- { 10000000, I2C_OAR2_FR_10_1667MHZ },
- { 16670000, I2C_OAR2_FR_1667_2667MHZ },
- { 26670000, I2C_OAR2_FR_2667_40MHZ },
- { 40000000, I2C_OAR2_FR_40_5333MHZ },
- { 53330000, I2C_OAR2_FR_5333_66MHZ },
- { 66000000, I2C_OAR2_FR_66_80MHZ },
- { 80000000, I2C_OAR2_FR_80_100MHZ },
+ { 0, 0xFFU },
+ { 2500000, I2C_OAR2_FR_25_10MHZ },
+ { 10000000, I2C_OAR2_FR_10_1667MHZ },
+ { 16670000, I2C_OAR2_FR_1667_2667MHZ },
+ { 26670000, I2C_OAR2_FR_2667_40MHZ },
+ { 40000000, I2C_OAR2_FR_40_5333MHZ },
+ { 53330000, I2C_OAR2_FR_5333_66MHZ },
+ { 66000000, I2C_OAR2_FR_66_80MHZ },
+ { 80000000, I2C_OAR2_FR_80_100MHZ },
{ 100000000, 0xFFU },
};
+
static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
{
if (dev->speed > 100000)
/* Fast Mode I2C */
- val = ((clkrate/dev->speed)-9)/3;
+ val = ((clkrate/dev->speed) - 9)/3 + 1;
else
/* Standard Mode I2C */
- val = ((clkrate/dev->speed)-7)/2;
+ val = ((clkrate/dev->speed) - 7)/2 + 1;
/* According to spec the divider must be > 2 */
if (val < 0x002) {
*/
clkrate = clk_get_rate(dev->clk);
ret = stu300_set_clk(dev, clkrate);
+
if (ret)
return ret;
/*
int attempts = 0;
struct stu300_dev *dev = i2c_get_adapdata(adap);
-
clk_enable(dev->clk);
/* Remove this if (0) to trace each and every message. */
if (attempts < NUM_ADDR_RESEND_ATTEMPTS && attempts > 0) {
dev_dbg(&dev->pdev->dev, "managed to get address "
- "through after %d attempts\n", attempts);
+ "through after %d attempts\n", attempts);
} else if (attempts == NUM_ADDR_RESEND_ATTEMPTS) {
dev_dbg(&dev->pdev->dev, "I give up, tried %d times "
- "to resend address.\n",
- NUM_ADDR_RESEND_ATTEMPTS);
+ "to resend address.\n",
+ NUM_ADDR_RESEND_ATTEMPTS);
goto exit_disable;
}
+
if (msg->flags & I2C_M_RD) {
/* READ: we read the actual bytes one at a time */
for (i = 0; i < msg->len; i++) {
{
int ret = -1;
int i;
+
struct stu300_dev *dev = i2c_get_adapdata(adap);
dev->msg_len = num;
+
for (i = 0; i < num; i++) {
/*
* Another driver appears to send stop for each message,
dev->msg_index = i;
ret = stu300_xfer_msg(adap, &msgs[i], (i == (num - 1)));
+
if (ret != 0) {
num = ret;
break;
struct resource *res;
int bus_nr;
int ret = 0;
+ char clk_name[] = "I2C0";
dev = kzalloc(sizeof(struct stu300_dev), GFP_KERNEL);
if (!dev) {
}
bus_nr = pdev->id;
- dev->clk = clk_get(&pdev->dev, NULL);
+ clk_name[3] += (char)bus_nr;
+ dev->clk = clk_get(&pdev->dev, clk_name);
if (IS_ERR(dev->clk)) {
ret = PTR_ERR(dev->clk);
dev_err(&pdev->dev, "could not retrieve i2c bus clock\n");
unsigned int cmd, void __user *argp)
{
struct input_dev *dev = joydev->handle.dev;
+ size_t len;
int i, j;
+ const char *name;
+ /* Process fixed-sized commands. */
switch (cmd) {
case JS_SET_CAL:
return copy_to_user(argp, joydev->corr,
sizeof(joydev->corr[0]) * joydev->nabs) ? -EFAULT : 0;
- case JSIOCSAXMAP:
- if (copy_from_user(joydev->abspam, argp,
- sizeof(__u8) * (ABS_MAX + 1)))
+ }
+
+ /*
+ * Process variable-sized commands (the axis and button map commands
+ * are considered variable-sized to decouple them from the values of
+ * ABS_MAX and KEY_MAX).
+ */
+ switch (cmd & ~IOCSIZE_MASK) {
+
+ case (JSIOCSAXMAP & ~IOCSIZE_MASK):
+ len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->abspam));
+ /*
+ * FIXME: we should not copy into our axis map before
+ * validating the data.
+ */
+ if (copy_from_user(joydev->abspam, argp, len))
return -EFAULT;
for (i = 0; i < joydev->nabs; i++) {
}
return 0;
- case JSIOCGAXMAP:
- return copy_to_user(argp, joydev->abspam,
- sizeof(__u8) * (ABS_MAX + 1)) ? -EFAULT : 0;
-
- case JSIOCSBTNMAP:
- if (copy_from_user(joydev->keypam, argp,
- sizeof(__u16) * (KEY_MAX - BTN_MISC + 1)))
+ case (JSIOCGAXMAP & ~IOCSIZE_MASK):
+ len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->abspam));
+ return copy_to_user(argp, joydev->abspam, len) ? -EFAULT : 0;
+
+ case (JSIOCSBTNMAP & ~IOCSIZE_MASK):
+ len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->keypam));
+ /*
+ * FIXME: we should not copy into our keymap before
+ * validating the data.
+ */
+ if (copy_from_user(joydev->keypam, argp, len))
return -EFAULT;
for (i = 0; i < joydev->nkey; i++) {
return 0;
- case JSIOCGBTNMAP:
- return copy_to_user(argp, joydev->keypam,
- sizeof(__u16) * (KEY_MAX - BTN_MISC + 1)) ? -EFAULT : 0;
+ case (JSIOCGBTNMAP & ~IOCSIZE_MASK):
+ len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->keypam));
+ return copy_to_user(argp, joydev->keypam, len) ? -EFAULT : 0;
- default:
- if ((cmd & ~IOCSIZE_MASK) == JSIOCGNAME(0)) {
- int len;
- const char *name = dev->name;
-
- if (!name)
- return 0;
- len = strlen(name) + 1;
- if (len > _IOC_SIZE(cmd))
- len = _IOC_SIZE(cmd);
- if (copy_to_user(argp, name, len))
- return -EFAULT;
- return len;
- }
+ case JSIOCGNAME(0):
+ name = dev->name;
+ if (!name)
+ return 0;
+
+ len = min_t(size_t, _IOC_SIZE(cmd), strlen(name) + 1);
+ return copy_to_user(argp, name, len) ? -EFAULT : len;
}
+
return -EINVAL;
}
{ 0x05ef, 0x8884, "AVB Mag Turbo Force", btn_avb_wheel, abs_wheel, ff_iforce },
{ 0x05ef, 0x8888, "AVB Top Shot Force Feedback Racing Wheel", btn_avb_tw, abs_wheel, ff_iforce }, //?
{ 0x061c, 0xc0a4, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, //?
+ { 0x061c, 0xc084, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce },
{ 0x06f8, 0x0001, "Guillemot Race Leader Force Feedback", btn_wheel, abs_wheel, ff_iforce }, //?
{ 0x06f8, 0x0004, "Guillemot Force Feedback Racing Wheel", btn_wheel, abs_wheel, ff_iforce }, //?
{ 0x06f8, 0x0004, "Gullemot Jet Leader 3D", btn_joystick, abs_joystick, ff_iforce }, //?
{ USB_DEVICE(0x05ef, 0x8884) }, /* AVB Mag Turbo Force */
{ USB_DEVICE(0x05ef, 0x8888) }, /* AVB Top Shot FFB Racing Wheel */
{ USB_DEVICE(0x061c, 0xc0a4) }, /* ACT LABS Force RS */
+ { USB_DEVICE(0x061c, 0xc084) }, /* ACT LABS Force RS */
{ USB_DEVICE(0x06f8, 0x0001) }, /* Guillemot Race Leader Force Feedback */
{ USB_DEVICE(0x06f8, 0x0004) }, /* Guillemot Force Feedback Racing Wheel */
{ USB_DEVICE(0x06f8, 0xa302) }, /* Guillemot Jet Leader 3D */
return result;
}
+static int wacom_query_tablet_data(struct usb_interface *intf)
+{
+ unsigned char *rep_data;
+ int limit = 0;
+ int error;
+
+ rep_data = kmalloc(2, GFP_KERNEL);
+ if (!rep_data)
+ return -ENOMEM;
+
+ do {
+ rep_data[0] = 2;
+ rep_data[1] = 2;
+ error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
+ 2, rep_data, 2);
+ if (error >= 0)
+ error = usb_get_report(intf,
+ WAC_HID_FEATURE_REPORT, 2,
+ rep_data, 2);
+ } while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
+
+ kfree(rep_data);
+
+ return error < 0 ? error : 0;
+}
+
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
struct wacom_features *features;
struct input_dev *input_dev;
int error = -ENOMEM;
- char rep_data[2], limit = 0;
struct hid_descriptor *hid_desc;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
/*
* Ask the tablet to report tablet data if it is not a Tablet PC.
- * Repeat until it succeeds
+ * Note that if query fails it is not a hard failure.
*/
- if (wacom_wac->features->type != TABLETPC) {
- do {
- rep_data[0] = 2;
- rep_data[1] = 2;
- error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
- 2, rep_data, 2);
- if (error >= 0)
- error = usb_get_report(intf,
- WAC_HID_FEATURE_REPORT, 2,
- rep_data, 2);
- } while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
- }
+ if (wacom_wac->features->type != TABLETPC)
+ wacom_query_tablet_data(intf);
usb_set_intfdata(intf, wacom);
return 0;
ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr);
ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
- if (isr & UCB_IE_TSPX) {
+ if (isr & UCB_IE_TSPX)
ucb1400_ts_irq_disable(ucb->ac97);
- enable_irq(ucb->irq);
- } else
- printk(KERN_ERR "ucb1400: unexpected IE_STATUS = %#x\n", isr);
+ else
+ dev_dbg(&ucb->ts_idev->dev, "ucb1400: unexpected IE_STATUS = %#x\n", isr);
+ enable_irq(ucb->irq);
}
static int ucb1400_ts_thread(void *_ucb)
static int ucb1400_ts_probe(struct platform_device *dev)
{
int error, x_res, y_res;
+ u16 fcsr;
struct ucb1400_ts *ucb = dev->dev.platform_data;
ucb->ts_idev = input_allocate_device();
ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+ /*
+ * Enable ADC filter to prevent horrible jitter on Colibri.
+ * This also further reduces jitter on boards where ADCSYNC
+ * pin is connected.
+ */
+ fcsr = ucb1400_reg_read(ucb->ac97, UCB_FCSR);
+ ucb1400_reg_write(ucb->ac97, UCB_FCSR, fcsr | UCB_FCSR_AVE);
+
ucb1400_adc_enable(ucb->ac97);
x_res = ucb1400_ts_read_xres(ucb);
y_res = ucb1400_ts_read_yres(ucb);
*(pkg->data_size) = 0;
} else if (tfr->data_size > *(pkg->data_size)) {
DMERR("Insufficient space to receive package [%u] "
- "(%u vs %lu)", tfr->request_type,
+ "(%u vs %zu)", tfr->request_type,
tfr->data_size, *(pkg->data_size));
*(pkg->data_size) = 0;
if (mode == 1)
set_disk_ro(disk, 1);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+ err = 0;
}
out:
mutex_unlock(&mddev->open_mutex);
/* dump all registers */
static void qt1010_dump_regs(struct qt1010_priv *priv)
{
- char buf[52], buf2[4];
u8 reg, val;
for (reg = 0; ; reg++) {
if (reg % 16 == 0) {
if (reg)
- printk("%s\n", buf);
- sprintf(buf, "%02x: ", reg);
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG "%02x:", reg);
}
if (qt1010_readreg(priv, reg, &val) == 0)
- sprintf(buf2, "%02x ", val);
+ printk(KERN_CONT " %02x", val);
else
- strcpy(buf2, "-- ");
- strcat(buf, buf2);
+ printk(KERN_CONT " --");
if (reg == 0x2f)
break;
}
- printk("%s\n", buf);
+ printk(KERN_CONT "\n");
}
static int qt1010_set_params(struct dvb_frontend *fe,
struct xc2028_data *priv = fe->tuner_priv;
int rc = 0;
- /* Avoid firmware reload on slow devices */
- if (no_poweroff)
+ /* Avoid firmware reload on slow devices or if PM disabled */
+ if (no_poweroff || priv->ctrl.disable_power_mgmt)
return 0;
tuner_dbg("Putting xc2028/3028 into poweroff mode.\n");
unsigned int input1:1;
unsigned int vhfbw7:1;
unsigned int uhfbw8:1;
+ unsigned int disable_power_mgmt:1;
unsigned int demod;
enum firmware_type type:2;
};
switch (req->cmd) {
case GET_CONFIG:
- case BOOT:
case READ_MEMORY:
case RECONNECT_USB:
case GET_IR_CODE:
case WRITE_VIRTUAL_MEMORY:
case COPY_FIRMWARE:
case DOWNLOAD_FIRMWARE:
+ case BOOT:
break;
default:
err("unknown command:%d", req->cmd);
struct cx22700_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct cx22700_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct cx22700_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
struct cx22702_state *state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct cx22702_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct cx22702_state), GFP_KERNEL);
if (state == NULL)
goto error;
int ret;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct cx24110_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct cx24110_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
struct dvb_dummy_fe_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
if (state == NULL) goto error;
/* create dvb_frontend */
struct dvb_dummy_fe_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
if (state == NULL) goto error;
/* create dvb_frontend */
struct dvb_dummy_fe_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
if (state == NULL) goto error;
/* create dvb_frontend */
{ .addr = config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct l64781_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct l64781_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
dprintk("%s\n", __func__);
/* Allocate memory for the internal state */
- state = kmalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL);
if (state == NULL)
goto error;
struct mt312_state *state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct mt312_state), GFP_KERNEL);
if (state == NULL)
goto error;
struct nxt6000_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct nxt6000_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct nxt6000_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
struct or51132_state* state = NULL;
/* Allocate memory for the internal state */
- state = kmalloc(sizeof(struct or51132_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct or51132_state), GFP_KERNEL);
if (state == NULL)
return NULL;
struct or51211_state* state = NULL;
/* Allocate memory for the internal state */
- state = kmalloc(sizeof(struct or51211_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct or51211_state), GFP_KERNEL);
if (state == NULL)
return NULL;
u16 reg;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct s5h1409_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct s5h1409_state), GFP_KERNEL);
if (state == NULL)
goto error;
u16 reg;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct s5h1411_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct s5h1411_state), GFP_KERNEL);
if (state == NULL)
goto error;
dprintk("%s\n", __func__);
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct si21xx_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct si21xx_state), GFP_KERNEL);
if (state == NULL)
goto error;
struct sp8870_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct sp8870_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct sp8870_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
struct sp887x_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct sp887x_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct sp887x_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
int id;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct stv0288_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct stv0288_state), GFP_KERNEL);
if (state == NULL)
goto error;
struct stv0297_state *state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct stv0297_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct stv0297_state), GFP_KERNEL);
if (state == NULL)
goto error;
int id;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct stv0299_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct stv0299_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
u8 id;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda10021_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda10021_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
dprintk(1, "%s()\n", __func__);
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda10048_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda10048_state), GFP_KERNEL);
if (state == NULL)
goto error;
int id;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
if (!state) {
printk(KERN_ERR "Can't alocate memory for tda10045 state\n");
return NULL;
int id;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
if (!state) {
printk(KERN_ERR "Can't alocate memory for tda10046 state\n");
return NULL;
dprintk ("%s\n", __func__);
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda10086_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda10086_state), GFP_KERNEL);
if (!state)
return NULL;
struct tda8083_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda8083_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda8083_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
struct ves1820_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct ves1820_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct ves1820_state), GFP_KERNEL);
if (state == NULL)
goto error;
u8 identity;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
static void zl10353_dump_regs(struct dvb_frontend *fe)
{
struct zl10353_state *state = fe->demodulator_priv;
- char buf[52], buf2[4];
int ret;
u8 reg;
for (reg = 0; ; reg++) {
if (reg % 16 == 0) {
if (reg)
- printk(KERN_DEBUG "%s\n", buf);
- sprintf(buf, "%02x: ", reg);
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG "%02x:", reg);
}
ret = zl10353_read_register(state, reg);
if (ret >= 0)
- sprintf(buf2, "%02x ", (u8)ret);
+ printk(KERN_CONT " %02x", (u8)ret);
else
- strcpy(buf2, "-- ");
- strcat(buf, buf2);
+ printk(KERN_CONT " --");
if (reg == 0xff)
break;
}
- printk(KERN_DEBUG "%s\n", buf);
+ printk(KERN_CONT "\n");
}
static void zl10353_calc_nominal_rate(struct dvb_frontend *fe,
config DVB_SIANO_SMS1XXX
tristate "Siano SMS1XXX USB dongle support"
- depends on DVB_CORE && USB
+ depends on DVB_CORE && USB && INPUT
---help---
Choose Y here if you have a USB dongle with a SMS1XXX chipset.
int sms_board_event(struct smscore_device_t *coredev,
enum SMS_BOARD_EVENTS gevent) {
- int board_id = smscore_get_board_id(coredev);
- struct sms_board *board = sms_get_board(board_id);
struct smscore_gpio_config MyGpioConfig;
sms_gpio_assign_11xx_default_led_config(&MyGpioConfig);
switch (gevent) {
case BOARD_EVENT_POWER_INIT: /* including hotplug */
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- /* set I/O and turn off all LEDs */
- smscore_gpio_configure(coredev,
- board->board_cfg.leds_power,
- &MyGpioConfig);
- smscore_gpio_set_level(coredev,
- board->board_cfg.leds_power, 0);
- smscore_gpio_configure(coredev, board->board_cfg.led0,
- &MyGpioConfig);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led0, 0);
- smscore_gpio_configure(coredev, board->board_cfg.led1,
- &MyGpioConfig);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
- /* set I/O and turn off LNA */
- smscore_gpio_configure(coredev,
- board->board_cfg.foreign_lna0_ctrl,
- &MyGpioConfig);
- smscore_gpio_set_level(coredev,
- board->board_cfg.foreign_lna0_ctrl,
- 0);
- break;
- }
break; /* BOARD_EVENT_BIND */
case BOARD_EVENT_POWER_SUSPEND:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.leds_power, 0);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led0, 0);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
- smscore_gpio_set_level(coredev,
- board->board_cfg.foreign_lna0_ctrl,
- 0);
- break;
- }
break; /* BOARD_EVENT_POWER_SUSPEND */
case BOARD_EVENT_POWER_RESUME:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.leds_power, 1);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led0, 1);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
- smscore_gpio_set_level(coredev,
- board->board_cfg.foreign_lna0_ctrl,
- 1);
- break;
- }
break; /* BOARD_EVENT_POWER_RESUME */
case BOARD_EVENT_BIND:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.leds_power, 1);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led0, 1);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
- smscore_gpio_set_level(coredev,
- board->board_cfg.foreign_lna0_ctrl,
- 1);
- break;
- }
break; /* BOARD_EVENT_BIND */
case BOARD_EVENT_SCAN_PROG:
case BOARD_EVENT_EMERGENCY_WARNING_SIGNAL:
break; /* BOARD_EVENT_EMERGENCY_WARNING_SIGNAL */
case BOARD_EVENT_FE_LOCK:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 1);
- break;
- }
break; /* BOARD_EVENT_FE_LOCK */
case BOARD_EVENT_FE_UNLOCK:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- }
break; /* BOARD_EVENT_FE_UNLOCK */
case BOARD_EVENT_DEMOD_LOCK:
break; /* BOARD_EVENT_DEMOD_LOCK */
case BOARD_EVENT_RECEPTION_LOST_0:
break; /* BOARD_EVENT_RECEPTION_LOST_0 */
case BOARD_EVENT_MULTIPLEX_OK:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 1);
- break;
- }
break; /* BOARD_EVENT_MULTIPLEX_OK */
case BOARD_EVENT_MULTIPLEX_ERRORS:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- }
break; /* BOARD_EVENT_MULTIPLEX_ERRORS */
default:
sms_debug("set device mode to %d", mode);
if (coredev->device_flags & SMS_DEVICE_FAMILY2) {
- if (mode < DEVICE_MODE_DVBT || mode > DEVICE_MODE_RAW_TUNER) {
+ if (mode < DEVICE_MODE_DVBT || mode >= DEVICE_MODE_RAW_TUNER) {
sms_err("invalid mode specified %d", mode);
return -EINVAL;
}
config USB_ZR364XX
tristate "USB ZR364XX Camera support"
depends on VIDEO_V4L2
+ select VIDEOBUF_GEN
+ select VIDEOBUF_VMALLOC
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port.
if (parport[0] && strncmp(parport[0], "auto", 4) != 0) {
/* user gave parport parameters */
- for(n=0; parport[n] && n<MAX_CAMS; n++){
+ for (n = 0; n < MAX_CAMS && parport[n]; n++) {
char *ep;
unsigned long r;
r = simple_strtoul(parport[n], &ep, 0);
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
* 02111-1307 USA
*/
+#include <linux/kernel.h>
#include "cx18-driver.h"
#include "cx18-cards.h"
idx = p.audio_properties & 0x03;
/* The audio clock of the digitizer must match the codec sample
rate otherwise you get some very strange effects. */
- if (idx < sizeof(freqs))
+ if (idx < ARRAY_SIZE(freqs))
cx18_call_all(cx, audio, s_clock_freq, freqs[idx]);
return err;
}
.fops = &mpeg_fops,
.ioctl_ops = &mpeg_ioctl_ops,
.minor = -1,
+ .tvnorms = CX23885_NORMS,
+ .current_norm = V4L2_STD_NTSC_M,
};
void cx23885_417_unregister(struct cx23885_dev *dev)
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
ctl->demod = XC3028_FE_OREN538;
break;
+ case CX88_BOARD_GENIATECH_X8000_MT:
+ /* FIXME: For this board, the xc3028 never recovers after being
+ powered down (the reset GPIO probably is not set properly).
+ We don't have access to the hardware so we cannot determine
+ which GPIO is used for xc3028, so just disable power xc3028
+ power management for now */
+ ctl->disable_power_mgmt = 1;
+ break;
case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
case CX88_BOARD_PROLINK_PV_8000GT:
static struct zl10353_config cx88_geniatech_x8000_mt = {
.demod_address = (0x1e >> 1),
.no_tuner = 1,
+ .disable_i2c_gate_ctrl = 1,
};
static struct s5h1411_config dvico_fusionhdtv7_config = {
udelay(100);
break;
case CX88_BOARD_HAUPPAUGE_HVR1300:
+ /* Enable MPEG parallel IO and video signal pins */
+ cx_write(MO_PINMUX_IO, 0x88);
+ cx_write(TS_SOP_STAT, 0);
+ cx_write(TS_VALERR_CNTRL, 0);
break;
case CX88_BOARD_PINNACLE_PCTV_HD_800i:
/* Enable MPEG parallel IO and video signal pins */
struct em28xx_board em28xx_boards[] = {
[EM2750_BOARD_UNKNOWN] = {
.name = "EM2710/EM2750/EM2751 webcam grabber",
- .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
+ .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
},
[EM2861_BOARD_PLEXTOR_PX_TV100U] = {
.name = "Plextor ConvertX PX-TV100U",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_TNF_5335MF,
+ .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
+ EM28XX_XCLK_FREQUENCY_12MHZ,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_TVP5150,
+ .has_msp34xx = 1,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
} },
},
.driver_info = EM2750_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2800),
.driver_info = EM2800_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2710),
+ .driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2820),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2821),
__be16 version_be;
u16 version;
+ /* Micron sensor detection */
dev->i2c_client.addr = 0xba >> 1;
cmd = 0;
i2c_master_send(&dev->i2c_client, &cmd, 1);
return -EINVAL;
version = be16_to_cpu(version_be);
-
switch (version) {
- case 0x8243: /* mt9v011 640x480 1.3 Mpix sensor */
+ case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
+ case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
+ em28xx_set_model(dev);
+
sensor_name = "mt9v011";
dev->em28xx_sensor = EM28XX_MT9V011;
dev->sensor_xres = 640;
dev->sensor_yres = 480;
- dev->sensor_xtal = 6300000;
+ /*
+ * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
+ * the Silvercrest cam I have here for testing - for higher
+ * resolutions, a high clock cause horizontal artifacts, so we
+ * need to use a lower xclk frequency.
+ * Yet, it would be possible to adjust xclk depending on the
+ * desired resolution, since this affects directly the
+ * frame rate.
+ */
+ dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
+ dev->sensor_xtal = 4300000;
/* probably means GRGB 16 bit bayer */
dev->vinmode = 0x0d;
break;
case 0x8431:
dev->model = EM2750_BOARD_UNKNOWN;
+ em28xx_set_model(dev);
+
sensor_name = "mt9m001";
dev->em28xx_sensor = EM28XX_MT9M001;
em28xx_initialize_mt9m001(dev);
return -EINVAL;
}
+ /* Setup webcam defaults */
+ em28xx_pre_card_setup(dev);
+
em28xx_errdev("Sensor is %s, using model %s entry.\n",
sensor_name, em28xx_boards[dev->model].name);
*/
void em28xx_pre_card_setup(struct em28xx *dev)
{
- int rc;
-
- em28xx_set_model(dev);
-
- em28xx_info("Identified as %s (card=%d)\n",
- dev->board.name, dev->model);
-
- /* Set the default GPO/GPIO for legacy devices */
- dev->reg_gpo_num = EM2880_R04_GPO;
- dev->reg_gpio_num = EM28XX_R08_GPIO;
-
- dev->wait_after_write = 5;
-
- /* Based on the Chip ID, set the device configuration */
- rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
- if (rc > 0) {
- dev->chip_id = rc;
-
- switch (dev->chip_id) {
- case CHIP_ID_EM2750:
- em28xx_info("chip ID is em2750\n");
- break;
- case CHIP_ID_EM2820:
- em28xx_info("chip ID is em2710 or em2820\n");
- break;
- case CHIP_ID_EM2840:
- em28xx_info("chip ID is em2840\n");
- break;
- case CHIP_ID_EM2860:
- em28xx_info("chip ID is em2860\n");
- break;
- case CHIP_ID_EM2870:
- em28xx_info("chip ID is em2870\n");
- dev->wait_after_write = 0;
- break;
- case CHIP_ID_EM2874:
- em28xx_info("chip ID is em2874\n");
- dev->reg_gpio_num = EM2874_R80_GPIO;
- dev->wait_after_write = 0;
- break;
- case CHIP_ID_EM2883:
- em28xx_info("chip ID is em2882/em2883\n");
- dev->wait_after_write = 0;
- break;
- default:
- em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
- }
- }
-
- /* Prepopulate cached GPO register content */
- rc = em28xx_read_reg(dev, dev->reg_gpo_num);
- if (rc >= 0)
- dev->reg_gpo = rc;
-
/* Set the initial XCLK and I2C clock values based on the board
definition */
em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
/* request some modules */
switch (dev->model) {
case EM2861_BOARD_PLEXTOR_PX_TV100U:
- /* FIXME guess */
- /* Turn on analog audio output */
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+ /* Sets the msp34xx I2S speed */
+ dev->i2s_speed = 2048000;
break;
case EM2861_BOARD_KWORLD_PVRTV_300U:
case EM2880_BOARD_KWORLD_DVB_305U:
void em28xx_card_setup(struct em28xx *dev)
{
- em28xx_set_model(dev);
+ /*
+ * If the device can be a webcam, seek for a sensor.
+ * If sensor is not found, then it isn't a webcam.
+ */
+ if (dev->board.is_webcam) {
+ if (em28xx_hint_sensor(dev) < 0)
+ dev->board.is_webcam = 0;
+ else
+ dev->progressive = 1;
+ } else
+ em28xx_set_model(dev);
+
+ em28xx_info("Identified as %s (card=%d)\n",
+ dev->board.name, dev->model);
dev->tuner_type = em28xx_boards[dev->model].tuner_type;
if (em28xx_boards[dev->model].tuner_addr)
em28xx_gpio_set(dev, dev->board.tuner_gpio);
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break;
- case EM2820_BOARD_SILVERCREST_WEBCAM:
- /* FIXME: need to document the registers bellow */
- em28xx_write_reg(dev, 0x0d, 0x42);
- em28xx_write_reg(dev, 0x13, 0x08);
}
if (dev->board.has_snapshot_button)
int minor)
{
struct em28xx *dev = *devhandle;
- int retval = -ENOMEM;
+ int retval;
int errCode;
dev->udev = udev;
dev->em28xx_read_reg_req = em28xx_read_reg_req;
dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
+ em28xx_set_model(dev);
+
+ /* Set the default GPO/GPIO for legacy devices */
+ dev->reg_gpo_num = EM2880_R04_GPO;
+ dev->reg_gpio_num = EM28XX_R08_GPIO;
+
+ dev->wait_after_write = 5;
+
+ /* Based on the Chip ID, set the device configuration */
+ retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
+ if (retval > 0) {
+ dev->chip_id = retval;
+
+ switch (dev->chip_id) {
+ case CHIP_ID_EM2710:
+ em28xx_info("chip ID is em2710\n");
+ break;
+ case CHIP_ID_EM2750:
+ em28xx_info("chip ID is em2750\n");
+ break;
+ case CHIP_ID_EM2820:
+ em28xx_info("chip ID is em2820 (or em2710)\n");
+ break;
+ case CHIP_ID_EM2840:
+ em28xx_info("chip ID is em2840\n");
+ break;
+ case CHIP_ID_EM2860:
+ em28xx_info("chip ID is em2860\n");
+ break;
+ case CHIP_ID_EM2870:
+ em28xx_info("chip ID is em2870\n");
+ dev->wait_after_write = 0;
+ break;
+ case CHIP_ID_EM2874:
+ em28xx_info("chip ID is em2874\n");
+ dev->reg_gpio_num = EM2874_R80_GPIO;
+ dev->wait_after_write = 0;
+ break;
+ case CHIP_ID_EM2883:
+ em28xx_info("chip ID is em2882/em2883\n");
+ dev->wait_after_write = 0;
+ break;
+ default:
+ em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
+ }
+ }
+
+ /* Prepopulate cached GPO register content */
+ retval = em28xx_read_reg(dev, dev->reg_gpo_num);
+ if (retval >= 0)
+ dev->reg_gpo = retval;
+
em28xx_pre_card_setup(dev);
if (!dev->board.is_em2800) {
dev->vinmode = 0x10;
dev->vinctl = 0x11;
- /*
- * If the device can be a webcam, seek for a sensor.
- * If sensor is not found, then it isn't a webcam.
- */
- if (dev->board.is_webcam)
- if (em28xx_hint_sensor(dev) < 0)
- dev->board.is_webcam = 0;
-
/* Do board specific init and eeprom reading */
em28xx_card_setup(dev);
return rc;
}
+ if (dev->board.is_webcam)
+ rc = em28xx_write_reg(dev, 0x13, 0x0c);
+
/* enable video capture */
rc = em28xx_write_reg(dev, 0x48, 0x00);
{
int width, height;
width = norm_maxw(dev);
- height = norm_maxh(dev) >> 1;
+ height = norm_maxh(dev);
+
+ if (!dev->progressive)
+ height >>= norm_maxh(dev);
em28xx_set_outfmt(dev);
}
break;
case EM2880_BOARD_KWORLD_DVB_310U:
- case EM2880_BOARD_EMPIRE_DUAL_TV:
dvb->frontend = dvb_attach(zl10353_attach,
&em28xx_zl10353_with_xc3028,
&dev->i2c_adap);
}
break;
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2880_BOARD_EMPIRE_DUAL_TV:
dvb->frontend = dvb_attach(zl10353_attach,
&em28xx_zl10353_xc3028_no_i2c_gate,
&dev->i2c_adap);
/* FIXME: Need to be populated with the other chip ID's */
enum em28xx_chip_id {
- CHIP_ID_EM2820 = 18, /* Also used by em2710 */
+ CHIP_ID_EM2710 = 17,
+ CHIP_ID_EM2820 = 18, /* Also used by some em2710 */
CHIP_ID_EM2840 = 20,
CHIP_ID_EM2750 = 33,
CHIP_ID_EM2860 = 34,
startread = p;
remain = len;
- /* Interlaces frame */
- if (buf->top_field)
+ if (dev->progressive)
fieldstart = outp;
- else
- fieldstart = outp + bytesperline;
+ else {
+ /* Interlaces two half frames */
+ if (buf->top_field)
+ fieldstart = outp;
+ else
+ fieldstart = outp + bytesperline;
+ }
linesdone = dma_q->pos / bytesperline;
currlinedone = dma_q->pos % bytesperline;
- offset = linesdone * bytesperline * 2 + currlinedone;
+
+ if (dev->progressive)
+ offset = linesdone * bytesperline + currlinedone;
+ else
+ offset = linesdone * bytesperline * 2 + currlinedone;
+
startwrite = fieldstart + offset;
lencopy = bytesperline - currlinedone;
lencopy = lencopy > remain ? remain : lencopy;
em28xx_isocdbg("Video frame %d, length=%i, %s\n", p[2],
len, (p[2] & 1) ? "odd" : "even");
- if (!(p[2] & 1)) {
+ if (dev->progressive || !(p[2] & 1)) {
if (buf != NULL)
buffer_filled(dev, dma_q, buf);
get_next_buf(dma_q, &buf);
f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
/* FIXME: TOP? NONE? BOTTOM? ALTENATE? */
- f->fmt.pix.field = dev->interlaced ?
+ if (dev->progressive)
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+ else
+ f->fmt.pix.field = dev->interlaced ?
V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP;
mutex_unlock(&dev->lock);
f->fmt.pix.bytesperline = (dev->width * fmt->depth + 7) >> 3;
f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * height;
f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
- f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+ if (dev->progressive)
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+ else
+ f->fmt.pix.field = dev->interlaced ?
+ V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP;
return 0;
}
return 0;
}
+static int vidioc_g_parm(struct file *file, void *priv,
+ struct v4l2_streamparm *p)
+{
+ struct em28xx_fh *fh = priv;
+ struct em28xx *dev = fh->dev;
+ int rc = 0;
+
+ if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (dev->board.is_webcam)
+ rc = v4l2_device_call_until_err(&dev->v4l2_dev, 0,
+ video, g_parm, p);
+ else
+ v4l2_video_std_frame_period(dev->norm,
+ &p->parm.capture.timeperframe);
+
+ return rc;
+}
+
+static int vidioc_s_parm(struct file *file, void *priv,
+ struct v4l2_streamparm *p)
+{
+ struct em28xx_fh *fh = priv;
+ struct em28xx *dev = fh->dev;
+
+ if (!dev->board.is_webcam)
+ return -EINVAL;
+
+ if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ return v4l2_device_call_until_err(&dev->v4l2_dev, 0, video, s_parm, p);
+}
+
static const char *iname[] = {
[EM28XX_VMUX_COMPOSITE1] = "Composite1",
[EM28XX_VMUX_COMPOSITE2] = "Composite2",
struct em28xx *dev;
enum v4l2_buf_type fh_type;
struct em28xx_fh *fh;
+ enum v4l2_field field;
dev = em28xx_get_device(minor, &fh_type, &radio);
dev->users++;
+ if (dev->progressive)
+ field = V4L2_FIELD_NONE;
+ else
+ field = V4L2_FIELD_INTERLACED;
+
videobuf_queue_vmalloc_init(&fh->vb_vidq, &em28xx_video_qops,
- NULL, &dev->slock, fh->type, V4L2_FIELD_INTERLACED,
+ NULL, &dev->slock, fh->type, field,
sizeof(struct em28xx_buffer), fh);
mutex_unlock(&dev->lock);
.vidioc_qbuf = vidioc_qbuf,
.vidioc_dqbuf = vidioc_dqbuf,
.vidioc_s_std = vidioc_s_std,
+ .vidioc_g_parm = vidioc_g_parm,
+ .vidioc_s_parm = vidioc_s_parm,
.vidioc_enum_input = vidioc_enum_input,
.vidioc_g_input = vidioc_g_input,
.vidioc_s_input = vidioc_s_input,
int sensor_xres, sensor_yres;
int sensor_xtal;
+ /* Allows progressive (e. g. non-interlaced) mode */
+ int progressive;
+
/* Vinmode/Vinctl used at the driver */
int vinmode, vinctl;
V4L2_STD_PAL_G | V4L2_STD_PAL_H | V4L2_STD_PAL_I |
V4L2_STD_PAL_D | V4L2_STD_PAL_M | V4L2_STD_PAL_N |
V4L2_STD_PAL_60,
+ .current_norm = V4L2_STD_NTSC | V4L2_STD_PAL_M |
+ V4L2_STD_PAL_60,
};
int hdpvr_register_videodev(struct hdpvr_device *dev, struct device *parent,
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/kernel.h>
#include "ivtv-driver.h"
#include "ivtv-cards.h"
idx = p.audio_properties & 0x03;
/* The audio clock of the digitizer must match the codec sample
rate otherwise you get some very strange effects. */
- if (idx < sizeof(freqs))
+ if (idx < ARRAY_SIZE(freqs))
ivtv_call_all(itv, audio, s_clock_freq, freqs[idx]);
return err;
}
.step = 1,
.default_value = 0,
.flags = 0,
- },
+ }, {
+ .id = V4L2_CID_HFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Mirror",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+ .default_value = 0,
+ .flags = 0,
+ }, {
+ .id = V4L2_CID_VFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Vflip",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+ .default_value = 0,
+ .flags = 0,
+ }, {
+ }
};
struct mt9v011 {
struct v4l2_subdev sd;
unsigned width, height;
unsigned xtal;
+ unsigned hflip:1;
+ unsigned vflip:1;
u16 global_gain, red_bal, blue_bal;
};
{ R0A_MT9V011_CLK_SPEED, 0x0000 },
{ R1E_MT9V011_DIGITAL_ZOOM, 0x0000 },
- { R20_MT9V011_READ_MODE, 0x1000 },
{ R07_MT9V011_OUT_CTRL, 0x0002 }, /* chip enable */
};
mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain);
}
-static void calc_fps(struct v4l2_subdev *sd)
+static void calc_fps(struct v4l2_subdev *sd, u32 *numerator, u32 *denominator)
{
struct mt9v011 *core = to_mt9v011(sd);
unsigned height, width, hblank, vblank, speed;
v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n",
tmp / 1000, tmp % 1000, t_time);
+
+ if (numerator && denominator) {
+ *numerator = 1000;
+ *denominator = (u32)frames_per_ms;
+ }
+}
+
+static u16 calc_speed(struct v4l2_subdev *sd, u32 numerator, u32 denominator)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+ unsigned height, width, hblank, vblank;
+ unsigned row_time, line_time;
+ u64 t_time, speed;
+
+ /* Avoid bogus calculus */
+ if (!numerator || !denominator)
+ return 0;
+
+ height = mt9v011_read(sd, R03_MT9V011_HEIGHT);
+ width = mt9v011_read(sd, R04_MT9V011_WIDTH);
+ hblank = mt9v011_read(sd, R05_MT9V011_HBLANK);
+ vblank = mt9v011_read(sd, R06_MT9V011_VBLANK);
+
+ row_time = width + 113 + hblank;
+ line_time = height + vblank + 1;
+
+ t_time = core->xtal * ((u64)numerator);
+ /* round to the closest value */
+ t_time += denominator / 2;
+ do_div(t_time, denominator);
+
+ speed = t_time;
+ do_div(speed, row_time * line_time);
+
+ /* Avoid having a negative value for speed */
+ if (speed < 2)
+ speed = 0;
+ else
+ speed -= 2;
+
+ /* Avoid speed overflow */
+ if (speed > 15)
+ return 15;
+
+ return (u16)speed;
}
static void set_res(struct v4l2_subdev *sd)
mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height);
mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height);
- calc_fps(sd);
+ calc_fps(sd, NULL, NULL);
};
+static void set_read_mode(struct v4l2_subdev *sd)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+ unsigned mode = 0x1000;
+
+ if (core->hflip)
+ mode |= 0x4000;
+
+ if (core->vflip)
+ mode |= 0x8000;
+
+ mt9v011_write(sd, R20_MT9V011_READ_MODE, mode);
+}
+
static int mt9v011_reset(struct v4l2_subdev *sd, u32 val)
{
int i;
set_balance(sd);
set_res(sd);
+ set_read_mode(sd);
return 0;
};
case V4L2_CID_BLUE_BALANCE:
ctrl->value = core->blue_bal;
return 0;
+ case V4L2_CID_HFLIP:
+ ctrl->value = core->hflip ? 1 : 0;
+ return 0;
+ case V4L2_CID_VFLIP:
+ ctrl->value = core->vflip ? 1 : 0;
+ return 0;
}
return -EINVAL;
}
case V4L2_CID_BLUE_BALANCE:
core->blue_bal = ctrl->value;
break;
+ case V4L2_CID_HFLIP:
+ core->hflip = ctrl->value;
+ set_read_mode(sd);
+ return 0;
+ case V4L2_CID_VFLIP:
+ core->vflip = ctrl->value;
+ set_read_mode(sd);
+ return 0;
default:
return -EINVAL;
}
return 0;
}
+static int mt9v011_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
+{
+ struct v4l2_captureparm *cp = &parms->parm.capture;
+
+ if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ memset(cp, 0, sizeof(struct v4l2_captureparm));
+ cp->capability = V4L2_CAP_TIMEPERFRAME;
+ calc_fps(sd,
+ &cp->timeperframe.numerator,
+ &cp->timeperframe.denominator);
+
+ return 0;
+}
+
+static int mt9v011_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
+{
+ struct v4l2_captureparm *cp = &parms->parm.capture;
+ struct v4l2_fract *tpf = &cp->timeperframe;
+ u16 speed;
+
+ if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+ if (cp->extendedmode != 0)
+ return -EINVAL;
+
+ speed = calc_speed(sd, tpf->numerator, tpf->denominator);
+
+ mt9v011_write(sd, R0A_MT9V011_CLK_SPEED, speed);
+ v4l2_dbg(1, debug, sd, "Setting speed to %d\n", speed);
+
+ /* Recalculate and update fps info */
+ calc_fps(sd, &tpf->numerator, &tpf->denominator);
+
+ return 0;
+}
+
static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
{
struct v4l2_pix_format *pix = &fmt->fmt.pix;
static int mt9v011_g_chip_ident(struct v4l2_subdev *sd,
struct v4l2_dbg_chip_ident *chip)
{
+ u16 version;
struct i2c_client *client = v4l2_get_subdevdata(sd);
+ version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
+
return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011,
- MT9V011_VERSION);
+ version);
}
static const struct v4l2_subdev_core_ops mt9v011_core_ops = {
.enum_fmt = mt9v011_enum_fmt,
.try_fmt = mt9v011_try_fmt,
.s_fmt = mt9v011_s_fmt,
+ .g_parm = mt9v011_g_parm,
+ .s_parm = mt9v011_s_parm,
};
static const struct v4l2_subdev_ops mt9v011_ops = {
/* Check if the sensor is really a MT9V011 */
version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
- if (version != MT9V011_VERSION) {
- v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n",
+ if ((version != MT9V011_VERSION) &&
+ (version != MT9V011_REV_B_VERSION)) {
+ v4l2_info(sd, "*** unknown micron chip detected (0x%04x).\n",
version);
kfree(core);
return -EINVAL;
core->height = 480;
core->xtal = 27000000; /* Hz */
- v4l_info(c, "chip found @ 0x%02x (%s)\n",
- c->addr << 1, c->adapter->name);
+ v4l_info(c, "chip found @ 0x%02x (%s - chip version 0x%04x)\n",
+ c->addr << 1, c->adapter->name, version);
return 0;
}
#define R35_MT9V011_GLOBAL_GAIN 0x35
#define RF1_MT9V011_CHIP_ENABLE 0xf1
-#define MT9V011_VERSION 0x8243
+#define MT9V011_VERSION 0x8232
+#define MT9V011_REV_B_VERSION 0x8243
#endif
return ret;
}
+/* Called under spinlock_irqsave(&pcdev->lock, ...) */
static void mx1_videobuf_queue(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct mx1_camera_dev *pcdev = ici->priv;
struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
- unsigned long flags;
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
vb, vb->baddr, vb->bsize);
- spin_lock_irqsave(&pcdev->lock, flags);
-
list_add_tail(&vb->queue, &pcdev->capture);
vb->state = VIDEOBUF_ACTIVE;
__raw_writel(temp, pcdev->base + CSICR1);
}
}
-
- spin_unlock_irqrestore(&pcdev->lock, flags);
}
static void mx1_videobuf_release(struct videobuf_queue *vq,
}
}
-/* Called with .vb_lock held */
+/*
+ * Called with .vb_lock mutex held and
+ * under spinlock_irqsave(&mx3_cam->lock, ...)
+ */
static void mx3_videobuf_queue(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
struct idmac_video_param *video = &ichan->params.video;
const struct soc_camera_data_format *data_fmt = icd->current_fmt;
dma_cookie_t cookie;
- unsigned long flags;
+
+ BUG_ON(!irqs_disabled());
/* This is the configuration of one sg-element */
video->out_pixel_fmt = fourcc_to_ipu_pix(data_fmt->fourcc);
memset((void *)vb->baddr, 0xaa, vb->bsize);
#endif
- spin_lock_irqsave(&mx3_cam->lock, flags);
-
list_add_tail(&vb->queue, &mx3_cam->capture);
if (!mx3_cam->active) {
vb->state = VIDEOBUF_QUEUED;
}
- spin_unlock_irqrestore(&mx3_cam->lock, flags);
+ spin_unlock_irq(&mx3_cam->lock);
cookie = txd->tx_submit(txd);
dev_dbg(&icd->dev, "Submitted cookie %d DMA 0x%08x\n", cookie, sg_dma_address(&buf->sg));
+
+ spin_lock_irq(&mx3_cam->lock);
+
if (cookie >= 0)
return;
/* Submit error */
vb->state = VIDEOBUF_PREPARED;
- spin_lock_irqsave(&mx3_cam->lock, flags);
-
list_del_init(&vb->queue);
if (mx3_cam->active == buf)
mx3_cam->active = NULL;
-
- spin_unlock_irqrestore(&mx3_cam->lock, flags);
}
/* Called with .vb_lock held */
dev_dbg(pcdev->soc_host.dev, "%s\n", __func__);
}
+/* Called under spinlock_irqsave(&pcdev->lock, ...) */
static void pxa_videobuf_queue(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct pxa_camera_dev *pcdev = ici->priv;
struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
- unsigned long flags;
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d active=%p\n", __func__,
vb, vb->baddr, vb->bsize, pcdev->active);
- spin_lock_irqsave(&pcdev->lock, flags);
-
list_add_tail(&vb->queue, &pcdev->capture);
vb->state = VIDEOBUF_ACTIVE;
if (!pcdev->active)
pxa_camera_start_capture(pcdev);
-
- spin_unlock_irqrestore(&pcdev->lock, flags);
}
static void pxa_videobuf_release(struct videobuf_queue *vq,
pcdev->mclk = 20000000;
}
+ pcdev->soc_host.dev = &pdev->dev;
pcdev->mclk_divisor = mclk_get_divisor(pcdev);
INIT_LIST_HEAD(&pcdev->capture);
pcdev->soc_host.drv_name = PXA_CAM_DRV_NAME;
pcdev->soc_host.ops = &pxa_soc_camera_host_ops;
pcdev->soc_host.priv = pcdev;
- pcdev->soc_host.dev = &pdev->dev;
pcdev->soc_host.nr = pdev->id;
err = soc_camera_host_register(&pcdev->soc_host);
.gpio = 0x0200100,
},
},
- [SAA7134_BOARD_HAUPPAUGE_HVR1120] = {
- .name = "Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid",
+ [SAA7134_BOARD_HAUPPAUGE_HVR1150] = {
+ .name = "Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.gpio = 0x0800100, /* GPIO 23 HI for FM */
},
},
- [SAA7134_BOARD_HAUPPAUGE_HVR1110R3] = {
- .name = "Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid",
+ [SAA7134_BOARD_HAUPPAUGE_HVR1120] = {
+ .name = "Hauppauge WinTV-HVR1120 DVB-T/Hybrid",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x0070,
.subdevice = 0x6706,
- .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1150,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x0070,
.subdevice = 0x6707,
- .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110R3,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x0070,
.subdevice = 0x6708,
- .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1150,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x0070,
.subdevice = 0x6709,
- .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110R3,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x0070,
.subdevice = 0x670a,
- .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110R3,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
switch (command) {
case TDA18271_CALLBACK_CMD_AGC_ENABLE: /* 0 */
switch (dev->board) {
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
case SAA7134_BOARD_HAUPPAUGE_HVR1120:
- case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
ret = saa7134_tda18271_hvr11x0_toggle_agc(dev, arg);
break;
default:
int ret;
switch (dev->board) {
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
case SAA7134_BOARD_HAUPPAUGE_HVR1120:
- case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
/* tda8290 + tda18271 */
ret = saa7134_tda8290_18271_callback(dev, command, arg);
break;
switch (tv.model) {
case 67019: /* WinTV-HVR1110 (Retail, IR Blaster, hybrid, FM, SVid/Comp, 3.5mm audio in) */
case 67109: /* WinTV-HVR1000 (Retail, IR Receive, analog, no FM, SVid/Comp, 3.5mm audio in) */
- case 67201: /* WinTV-HVR1120 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */
+ case 67201: /* WinTV-HVR1150 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */
case 67301: /* WinTV-HVR1000 (Retail, IR Receive, analog, no FM, SVid/Comp, 3.5mm audio in) */
case 67209: /* WinTV-HVR1110 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */
case 67559: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
case 67579: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM) */
case 67589: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM, SVid/Comp, RCA aud) */
case 67599: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM, SVid/Comp, RCA aud) */
- case 67651: /* WinTV-HVR1120 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
+ case 67651: /* WinTV-HVR1150 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
case 67659: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
break;
default:
saa_writeb (SAA7134_PRODUCTION_TEST_MODE, 0x00);
break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
case SAA7134_BOARD_HAUPPAUGE_HVR1120:
- case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
/* GPIO 26 high for digital, low for analog */
saa7134_set_gpio(dev, 26, 0);
msleep(1);
dev->name, saa7134_boards[dev->board].name);
}
break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
case SAA7134_BOARD_HAUPPAUGE_HVR1120:
- case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
hauppauge_eeprom(dev, dev->eedata+0x80);
break;
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
&tda827x_cfg_2) < 0)
goto dettach_frontend;
break;
- case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
+ case SAA7134_BOARD_HAUPPAUGE_HVR1120:
fe0->dvb.frontend = dvb_attach(tda10048_attach,
&hcw_tda10048_config,
&dev->i2c_adap);
&tda827x_cfg_1) < 0)
goto dettach_frontend;
break;
- case SAA7134_BOARD_HAUPPAUGE_HVR1120:
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
&hcw_lgdt3305_config,
&dev->i2c_adap);
#define SAA7134_BOARD_ASUSTeK_TIGER 152
#define SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG 153
#define SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS 154
-#define SAA7134_BOARD_HAUPPAUGE_HVR1120 155
-#define SAA7134_BOARD_HAUPPAUGE_HVR1110R3 156
+#define SAA7134_BOARD_HAUPPAUGE_HVR1150 155
+#define SAA7134_BOARD_HAUPPAUGE_HVR1120 156
#define SAA7134_BOARD_AVERMEDIA_STUDIO_507UA 157
#define SAA7134_BOARD_AVERMEDIA_CARDBUS_501 158
#define SAA7134_BOARD_BEHOLD_505RDS 159
return ret;
}
+/* Called under spinlock_irqsave(&pcdev->lock, ...) */
static void sh_mobile_ceu_videobuf_queue(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
struct soc_camera_device *icd = vq->priv_data;
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
- unsigned long flags;
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %zd\n", __func__,
vb, vb->baddr, vb->bsize);
vb->state = VIDEOBUF_QUEUED;
- spin_lock_irqsave(&pcdev->lock, flags);
list_add_tail(&vb->queue, &pcdev->capture);
if (!pcdev->active) {
pcdev->active = vb;
sh_mobile_ceu_capture(pcdev);
}
-
- spin_unlock_irqrestore(&pcdev->lock, flags);
}
static void sh_mobile_ceu_videobuf_release(struct videobuf_queue *vq,
depth = 1;
else
depth = 2;
- while (stk_sizes[i].m != dev->vsettings.mode
- && i < ARRAY_SIZE(stk_sizes))
+ while (i < ARRAY_SIZE(stk_sizes) &&
+ stk_sizes[i].m != dev->vsettings.mode)
i++;
if (i == ARRAY_SIZE(stk_sizes)) {
STK_ERROR("Something is broken in %s\n", __func__);
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
.driver_info = UVC_QUIRK_STREAM_NO_FID },
- /* ViMicro */
- { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ /* ViMicro Vega */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x0ac8,
+ .idProduct = 0x332d,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_FIX_BANDWIDTH },
+ /* ViMicro - Minoru3D */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x0ac8,
+ .idProduct = 0x3410,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_FIX_BANDWIDTH },
+ /* ViMicro Venus - Minoru3D */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
| USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x0ac8,
- .idProduct = 0x0000,
+ .idProduct = 0x3420,
.bInterfaceClass = USB_CLASS_VIDEO,
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
break;
default:
- uvc_printk(KERN_INFO, "unknown event type %u.\n",
- dev->status[0]);
+ uvc_trace(UVC_TRACE_STATUS, "Unknown status event "
+ "type %u.\n", dev->status[0]);
break;
}
}
/* Calls the specific handler */
if (ops->vidioc_g_std)
ret = ops->vidioc_g_std(file, fh, id);
- else
+ else if (vfd->current_norm)
*id = vfd->current_norm;
+ else
+ ret = -EINVAL;
if (!ret)
dbgarg(cmd, "std=0x%08Lx\n", (long long unsigned)*id);
break;
ret = ops->vidioc_g_parm(file, fh, p);
} else {
+ v4l2_std_id std = vfd->current_norm;
+
if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
- v4l2_video_std_frame_period(vfd->current_norm,
- &p->parm.capture.timeperframe);
ret = 0;
+ if (ops->vidioc_g_std)
+ ret = ops->vidioc_g_std(file, fh, &std);
+ else if (std == 0)
+ ret = -EINVAL;
+ if (ret == 0)
+ v4l2_video_std_frame_period(std,
+ &p->parm.capture.timeperframe);
}
dbgarg(cmd, "type=%d\n", p->type);
buf64 = (uint64_t *)buf;
while (i < len/8) {
uint64_t x;
- asm ("ldrd\t%0, [%1]" : "=r" (x) : "r" (io_base));
+ asm volatile ("ldrd\t%0, [%1]" : "=&r" (x) : "r" (io_base));
buf64[i++] = x;
}
i *= 8;
CH_3C900B_FL,
CH_3C905_1,
CH_3C905_2,
+ CH_3C905B_TX,
CH_3C905B_1,
CH_3C905B_2,
PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
{"3c905 Boomerang 100baseT4",
PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
+ {"3C905B-TX Fast Etherlink XL PCI",
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
{"3c905B Cyclone 100baseTx",
PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
{ 0x10B7, 0x900A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900B_FL },
{ 0x10B7, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_1 },
{ 0x10B7, 0x9051, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_2 },
+ { 0x10B7, 0x9054, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_TX },
{ 0x10B7, 0x9055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_1 },
{ 0x10B7, 0x9058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_2 },
dma_addr_t mapping;
struct sk_buff *skb, *new_skb;
struct cp_desc *desc;
- unsigned buflen;
+ const unsigned buflen = cp->rx_buf_sz;
skb = cp->rx_skb[rx_tail];
BUG_ON(!skb);
pr_debug("%s: rx slot %d status 0x%x len %d\n",
dev->name, rx_tail, status, len);
- buflen = cp->rx_buf_sz + NET_IP_ALIGN;
- new_skb = netdev_alloc_skb(dev, buflen);
+ new_skb = netdev_alloc_skb(dev, buflen + NET_IP_ALIGN);
if (!new_skb) {
dev->stats.rx_dropped++;
goto rx_next;
tristate "Micrel KSZ8842"
depends on HAS_IOMEM
help
- This platform driver is for Micrel KSZ8842 chip.
+ This platform driver is for Micrel KSZ8842 / KS8842
+ 2-port ethernet switch chip (managed, VLAN, QoS).
config KS8851
tristate "Micrel KS8851 SPI"
depends on SPI
select MII
+ select CRC32
help
SPI driver for Micrel KS8851 SPI attached network chip.
.probe = w90p910_ether_probe,
.remove = __devexit_p(w90p910_ether_remove),
.driver = {
- .name = "w90p910-emc",
+ .name = "nuc900-emc",
.owner = THIS_MODULE,
},
};
MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
MODULE_DESCRIPTION("w90p910 MAC driver!");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:w90p910-emc");
+MODULE_ALIAS("platform:nuc900-emc");
{
struct atl1c_adapter *adapter = netdev_priv(netdev);
- strncpy(drvinfo->driver, atl1c_driver_name, sizeof(drvinfo->driver));
- strncpy(drvinfo->version, atl1c_driver_version,
+ strlcpy(drvinfo->driver, atl1c_driver_name, sizeof(drvinfo->driver));
+ strlcpy(drvinfo->version, atl1c_driver_version,
sizeof(drvinfo->version));
- strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
- strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
+ strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
+ strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
sizeof(drvinfo->bus_info));
drvinfo->n_stats = 0;
drvinfo->testinfo_len = 0;
{
struct atl1_adapter *adapter = netdev_priv(netdev);
- strncpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver));
- strncpy(drvinfo->version, ATLX_DRIVER_VERSION,
+ strlcpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver));
+ strlcpy(drvinfo->version, ATLX_DRIVER_VERSION,
sizeof(drvinfo->version));
- strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
- strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
+ strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
+ strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
sizeof(drvinfo->bus_info));
drvinfo->eedump_len = ATL1_EEDUMP_LEN;
}
int rc = NETDEV_TX_OK;
dma_addr_t mapping;
u32 len, entry, ctrl;
+ unsigned long flags;
len = skb->len;
- spin_lock_irq(&bp->lock);
+ spin_lock_irqsave(&bp->lock, flags);
/* This is a hard error, log it. */
if (unlikely(TX_BUFFS_AVAIL(bp) < 1)) {
dev->trans_start = jiffies;
out_unlock:
- spin_unlock_irq(&bp->lock);
+ spin_unlock_irqrestore(&bp->lock, flags);
return rc;
struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+ mutex_lock(&bp->cnic_lock);
cp->drv_state = 0;
bnapi->cnic_present = 0;
rcu_assign_pointer(bp->cnic_ops, NULL);
+ mutex_unlock(&bp->cnic_lock);
synchronize_rcu();
return 0;
}
struct cnic_ops *c_ops;
struct cnic_ctl_info info;
- rcu_read_lock();
- c_ops = rcu_dereference(bp->cnic_ops);
+ mutex_lock(&bp->cnic_lock);
+ c_ops = bp->cnic_ops;
if (c_ops) {
info.cmd = CNIC_CTL_STOP_CMD;
c_ops->cnic_ctl(bp->cnic_data, &info);
}
- rcu_read_unlock();
+ mutex_unlock(&bp->cnic_lock);
}
static void
struct cnic_ops *c_ops;
struct cnic_ctl_info info;
- rcu_read_lock();
- c_ops = rcu_dereference(bp->cnic_ops);
+ mutex_lock(&bp->cnic_lock);
+ c_ops = bp->cnic_ops;
if (c_ops) {
if (!(bp->flags & BNX2_FLAG_USING_MSIX)) {
struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
info.cmd = CNIC_CTL_START_CMD;
c_ops->cnic_ctl(bp->cnic_data, &info);
}
- rcu_read_unlock();
+ mutex_unlock(&bp->cnic_lock);
}
#else
spin_lock_init(&bp->phy_lock);
spin_lock_init(&bp->indirect_lock);
+#ifdef BCM_CNIC
+ mutex_init(&bp->cnic_lock);
+#endif
INIT_WORK(&bp->reset_task, bnx2_reset_task);
dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0);
u32 idle_chk_status_idx;
#ifdef BCM_CNIC
+ struct mutex cnic_lock;
struct cnic_eth_dev cnic_eth_dev;
#endif
return -EMSGSIZE;
}
+static int can_newlink(struct net_device *dev,
+ struct nlattr *tb[], struct nlattr *data[])
+{
+ return -EOPNOTSUPP;
+}
+
static struct rtnl_link_ops can_link_ops __read_mostly = {
.kind = "can",
.maxtype = IFLA_CAN_MAX,
.policy = can_policy,
.setup = can_setup,
+ .newlink = can_newlink,
.changelink = can_changelink,
.fill_info = can_fill_info,
.fill_xstats = can_fill_xstats,
return NULL;
}
+static inline void ulp_get(struct cnic_ulp_ops *ulp_ops)
+{
+ atomic_inc(&ulp_ops->ref_count);
+}
+
+static inline void ulp_put(struct cnic_ulp_ops *ulp_ops)
+{
+ atomic_dec(&ulp_ops->ref_count);
+}
+
static void cnic_ctx_wr(struct cnic_dev *dev, u32 cid_addr, u32 off, u32 val)
{
struct cnic_local *cp = dev->cnic_priv;
}
read_unlock(&cnic_dev_lock);
+ atomic_set(&ulp_ops->ref_count, 0);
rcu_assign_pointer(cnic_ulp_tbl[ulp_type], ulp_ops);
mutex_unlock(&cnic_lock);
int cnic_unregister_driver(int ulp_type)
{
struct cnic_dev *dev;
+ struct cnic_ulp_ops *ulp_ops;
+ int i = 0;
if (ulp_type >= MAX_CNIC_ULP_TYPE) {
printk(KERN_ERR PFX "cnic_unregister_driver: Bad type %d\n",
return -EINVAL;
}
mutex_lock(&cnic_lock);
- if (!cnic_ulp_tbl[ulp_type]) {
+ ulp_ops = cnic_ulp_tbl[ulp_type];
+ if (!ulp_ops) {
printk(KERN_ERR PFX "cnic_unregister_driver: Type %d has not "
"been registered\n", ulp_type);
goto out_unlock;
mutex_unlock(&cnic_lock);
synchronize_rcu();
+ while ((atomic_read(&ulp_ops->ref_count) != 0) && (i < 20)) {
+ msleep(100);
+ i++;
+ }
+
+ if (atomic_read(&ulp_ops->ref_count) != 0)
+ printk(KERN_WARNING PFX "%s: Failed waiting for ref count to go"
+ " to zero.\n", dev->netdev->name);
return 0;
out_unlock:
static int cnic_unregister_device(struct cnic_dev *dev, int ulp_type)
{
struct cnic_local *cp = dev->cnic_priv;
+ int i = 0;
if (ulp_type >= MAX_CNIC_ULP_TYPE) {
printk(KERN_ERR PFX "cnic_unregister_device: Bad type %d\n",
synchronize_rcu();
+ while (test_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[ulp_type]) &&
+ i < 20) {
+ msleep(100);
+ i++;
+ }
+ if (test_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[ulp_type]))
+ printk(KERN_WARNING PFX "%s: Failed waiting for ULP up call"
+ " to complete.\n", dev->netdev->name);
+
return 0;
}
EXPORT_SYMBOL(cnic_unregister_driver);
if (cp->cnic_uinfo)
cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
- rcu_read_lock();
for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
struct cnic_ulp_ops *ulp_ops;
- ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
- if (!ulp_ops)
+ mutex_lock(&cnic_lock);
+ ulp_ops = cp->ulp_ops[if_type];
+ if (!ulp_ops) {
+ mutex_unlock(&cnic_lock);
continue;
+ }
+ set_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
+ mutex_unlock(&cnic_lock);
if (test_and_clear_bit(ULP_F_START, &cp->ulp_flags[if_type]))
ulp_ops->cnic_stop(cp->ulp_handle[if_type]);
+
+ clear_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
}
- rcu_read_unlock();
}
static void cnic_ulp_start(struct cnic_dev *dev)
struct cnic_local *cp = dev->cnic_priv;
int if_type;
- rcu_read_lock();
for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
struct cnic_ulp_ops *ulp_ops;
- ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
- if (!ulp_ops || !ulp_ops->cnic_start)
+ mutex_lock(&cnic_lock);
+ ulp_ops = cp->ulp_ops[if_type];
+ if (!ulp_ops || !ulp_ops->cnic_start) {
+ mutex_unlock(&cnic_lock);
continue;
+ }
+ set_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
+ mutex_unlock(&cnic_lock);
if (!test_and_set_bit(ULP_F_START, &cp->ulp_flags[if_type]))
ulp_ops->cnic_start(cp->ulp_handle[if_type]);
+
+ clear_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
}
- rcu_read_unlock();
}
static int cnic_ctl(void *data, struct cnic_ctl_info *info)
switch (info->cmd) {
case CNIC_CTL_STOP_CMD:
cnic_hold(dev);
- mutex_lock(&cnic_lock);
cnic_ulp_stop(dev);
cnic_stop_hw(dev);
- mutex_unlock(&cnic_lock);
cnic_put(dev);
break;
case CNIC_CTL_START_CMD:
cnic_hold(dev);
- mutex_lock(&cnic_lock);
if (!cnic_start_hw(dev))
cnic_ulp_start(dev);
- mutex_unlock(&cnic_lock);
cnic_put(dev);
break;
default:
int i;
struct cnic_local *cp = dev->cnic_priv;
- rcu_read_lock();
for (i = 0; i < MAX_CNIC_ULP_TYPE_EXT; i++) {
struct cnic_ulp_ops *ulp_ops;
- ulp_ops = rcu_dereference(cnic_ulp_tbl[i]);
- if (!ulp_ops || !ulp_ops->cnic_init)
+ mutex_lock(&cnic_lock);
+ ulp_ops = cnic_ulp_tbl[i];
+ if (!ulp_ops || !ulp_ops->cnic_init) {
+ mutex_unlock(&cnic_lock);
continue;
+ }
+ ulp_get(ulp_ops);
+ mutex_unlock(&cnic_lock);
if (!test_and_set_bit(ULP_F_INIT, &cp->ulp_flags[i]))
ulp_ops->cnic_init(dev);
+ ulp_put(ulp_ops);
}
- rcu_read_unlock();
}
static void cnic_ulp_exit(struct cnic_dev *dev)
int i;
struct cnic_local *cp = dev->cnic_priv;
- rcu_read_lock();
for (i = 0; i < MAX_CNIC_ULP_TYPE_EXT; i++) {
struct cnic_ulp_ops *ulp_ops;
- ulp_ops = rcu_dereference(cnic_ulp_tbl[i]);
- if (!ulp_ops || !ulp_ops->cnic_exit)
+ mutex_lock(&cnic_lock);
+ ulp_ops = cnic_ulp_tbl[i];
+ if (!ulp_ops || !ulp_ops->cnic_exit) {
+ mutex_unlock(&cnic_lock);
continue;
+ }
+ ulp_get(ulp_ops);
+ mutex_unlock(&cnic_lock);
if (test_and_clear_bit(ULP_F_INIT, &cp->ulp_flags[i]))
ulp_ops->cnic_exit(dev);
+ ulp_put(ulp_ops);
}
- rcu_read_unlock();
}
static int cnic_cm_offload_pg(struct cnic_sock *csk)
return 0;
}
-static int cnic_start_hw(struct cnic_dev *dev)
+static int cnic_register_netdev(struct cnic_dev *dev)
{
struct cnic_local *cp = dev->cnic_priv;
struct cnic_eth_dev *ethdev = cp->ethdev;
int err;
- if (test_bit(CNIC_F_CNIC_UP, &dev->flags))
- return -EALREADY;
+ if (!ethdev)
+ return -ENODEV;
+
+ if (ethdev->drv_state & CNIC_DRV_STATE_REGD)
+ return 0;
err = ethdev->drv_register_cnic(dev->netdev, cp->cnic_ops, dev);
- if (err) {
+ if (err)
printk(KERN_ERR PFX "%s: register_cnic failed\n",
dev->netdev->name);
- goto err2;
- }
+
+ return err;
+}
+
+static void cnic_unregister_netdev(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_eth_dev *ethdev = cp->ethdev;
+
+ if (!ethdev)
+ return;
+
+ ethdev->drv_unregister_cnic(dev->netdev);
+}
+
+static int cnic_start_hw(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_eth_dev *ethdev = cp->ethdev;
+ int err;
+
+ if (test_bit(CNIC_F_CNIC_UP, &dev->flags))
+ return -EALREADY;
dev->regview = ethdev->io_base;
cp->chip_id = ethdev->chip_id;
return 0;
err1:
- ethdev->drv_unregister_cnic(dev->netdev);
cp->free_resc(dev);
pci_dev_put(dev->pcidev);
-err2:
return err;
}
static void cnic_stop_bnx2_hw(struct cnic_dev *dev)
{
- struct cnic_local *cp = dev->cnic_priv;
- struct cnic_eth_dev *ethdev = cp->ethdev;
-
cnic_disable_bnx2_int_sync(dev);
cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 0);
cnic_setup_5709_context(dev, 0);
cnic_free_irq(dev);
- ethdev->drv_unregister_cnic(dev->netdev);
-
cnic_free_resc(dev);
}
probe = symbol_get(bnx2_cnic_probe);
if (probe) {
ethdev = (*probe)(dev);
- symbol_put_addr(probe);
+ symbol_put(bnx2_cnic_probe);
}
if (!ethdev)
return NULL;
else if (event == NETDEV_UNREGISTER)
cnic_ulp_exit(dev);
else if (event == NETDEV_UP) {
- mutex_lock(&cnic_lock);
+ if (cnic_register_netdev(dev) != 0) {
+ cnic_put(dev);
+ goto done;
+ }
if (!cnic_start_hw(dev))
cnic_ulp_start(dev);
- mutex_unlock(&cnic_lock);
}
rcu_read_lock();
rcu_read_unlock();
if (event == NETDEV_GOING_DOWN) {
- mutex_lock(&cnic_lock);
cnic_ulp_stop(dev);
cnic_stop_hw(dev);
- mutex_unlock(&cnic_lock);
+ cnic_unregister_netdev(dev);
} else if (event == NETDEV_UNREGISTER) {
write_lock(&cnic_dev_lock);
list_del_init(&dev->list);
}
cnic_ulp_exit(dev);
+ cnic_unregister_netdev(dev);
list_del_init(&dev->list);
cnic_free_dev(dev);
}
unsigned long ulp_flags[MAX_CNIC_ULP_TYPE];
#define ULP_F_INIT 0
#define ULP_F_START 1
+#define ULP_F_CALL_PENDING 2
struct cnic_ulp_ops *ulp_ops[MAX_CNIC_ULP_TYPE];
/* protected by ulp_lock */
void (*iscsi_nl_send_msg)(struct cnic_dev *dev, u32 msg_type,
char *data, u16 data_size);
struct module *owner;
+ atomic_t ref_count;
};
extern int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops);
nic->ru_running = RU_SUSPENDED;
pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
sizeof(struct rfd),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_FROMDEVICE);
return -ENODATA;
}
{
struct e1000_nvm_info *nvm = &hw->nvm;
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
- union ich8_hws_flash_status hsfsts;
- u32 gfpreg;
- u32 sector_base_addr;
- u32 sector_end_addr;
+ u32 gfpreg, sector_base_addr, sector_end_addr;
u16 i;
/* Can't read flash registers if the register set isn't mapped. */
/* Adjust to word count */
nvm->flash_bank_size /= sizeof(u16);
- /*
- * Make sure the flash bank size does not overwrite the 4k
- * sector ranges. We may have 64k allotted to us but we only care
- * about the first 2 4k sectors. Therefore, if we have anything less
- * than 64k set in the HSFSTS register, we will reduce the bank size
- * down to 4k and let the rest remain unused. If berasesz == 3, then
- * we are working in 64k mode. Otherwise we are not.
- */
- if (nvm->flash_bank_size > E1000_ICH8_SHADOW_RAM_WORDS) {
- hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.berasesz != 3)
- nvm->flash_bank_size = E1000_ICH8_SHADOW_RAM_WORDS;
- }
-
nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS;
/* Clear shadow ram */
**/
static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
{
- u32 extcnf_ctrl;
- u32 timeout = PHY_CFG_TIMEOUT;
+ u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT;
+ s32 ret_val = 0;
might_sleep();
while (timeout) {
extcnf_ctrl = er32(EXTCNF_CTRL);
+ if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG))
+ break;
- if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)) {
- extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
- ew32(EXTCNF_CTRL, extcnf_ctrl);
+ mdelay(1);
+ timeout--;
+ }
+
+ if (!timeout) {
+ hw_dbg(hw, "SW/FW/HW has locked the resource for too long.\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ timeout = PHY_CFG_TIMEOUT * 2;
+
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+
+ while (timeout) {
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+ if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
+ break;
- extcnf_ctrl = er32(EXTCNF_CTRL);
- if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
- break;
- }
mdelay(1);
timeout--;
}
if (!timeout) {
- hw_dbg(hw, "FW or HW has locked the resource for too long.\n");
+ hw_dbg(hw, "Failed to acquire the semaphore.\n");
extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
ew32(EXTCNF_CTRL, extcnf_ctrl);
- mutex_unlock(&nvm_mutex);
- return -E1000_ERR_CONFIG;
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
}
- return 0;
+out:
+ if (ret_val)
+ mutex_unlock(&nvm_mutex);
+
+ return ret_val;
}
/**
struct e1000_nvm_info *nvm = &hw->nvm;
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
u32 act_offset;
- s32 ret_val;
+ s32 ret_val = 0;
u32 bank = 0;
u16 i, word;
goto out;
ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
- if (ret_val)
- goto release;
+ if (ret_val) {
+ hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n");
+ bank = 0;
+ }
act_offset = (bank) ? nvm->flash_bank_size : 0;
act_offset += offset;
+ ret_val = 0;
for (i = 0; i < words; i++) {
if ((dev_spec->shadow_ram) &&
(dev_spec->shadow_ram[offset+i].modified)) {
}
}
-release:
e1000_release_swflag_ich8lan(hw);
out:
{
struct e1000_nvm_info *nvm = &hw->nvm;
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
- s32 ret_val;
u16 i;
if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
return -E1000_ERR_NVM;
}
- ret_val = e1000_acquire_swflag_ich8lan(hw);
- if (ret_val)
- return ret_val;
-
for (i = 0; i < words; i++) {
dev_spec->shadow_ram[offset+i].modified = 1;
dev_spec->shadow_ram[offset+i].value = data[i];
}
- e1000_release_swflag_ich8lan(hw);
-
return 0;
}
*/
ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
if (ret_val) {
- e1000_release_swflag_ich8lan(hw);
- goto out;
+ hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n");
+ bank = 0;
}
if (bank == 0) {
iteration = 1;
break;
case 2:
- if (hw->mac.type == e1000_ich9lan) {
- sector_size = ICH_FLASH_SEG_SIZE_8K;
- iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_8K;
- } else {
- return -E1000_ERR_NVM;
- }
+ sector_size = ICH_FLASH_SEG_SIZE_8K;
+ iteration = 1;
break;
case 3:
sector_size = ICH_FLASH_SEG_SIZE_64K;
/* Start with the base address, then add the sector offset. */
flash_linear_addr = hw->nvm.flash_base_addr;
- flash_linear_addr += (bank) ? (sector_size * iteration) : 0;
+ flash_linear_addr += (bank) ? flash_bank_size : 0;
for (j = 0; j < iteration ; j++) {
do {
/* Allow time for pending master requests to run */
e1000e_disable_pcie_master(&adapter->hw);
- if ((adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) &&
- !(hw->mac.ops.check_mng_mode(hw))) {
+ if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
/* enable wakeup by the PHY */
retval = e1000_init_phy_wakeup(adapter, wufc);
if (retval)
*enable_wake = !!wufc;
/* make sure adapter isn't asleep if manageability is enabled */
- if (adapter->flags & FLAG_MNG_PT_ENABLED)
+ if ((adapter->flags & FLAG_MNG_PT_ENABLED) ||
+ (hw->mac.ops.check_mng_mode(hw)))
*enable_wake = true;
if (adapter->hw.phy.type == e1000_phy_igp_3)
return err;
}
- /* AER (Advanced Error Reporting) hooks */
- err = pci_enable_pcie_error_reporting(pdev);
- if (err) {
- dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
- "0x%x\n", err);
- /* non-fatal, continue */
- }
-
pci_set_master(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
if (err)
goto err_pci_reg;
+ /* AER (Advanced Error Reporting) hooks */
+ err = pci_enable_pcie_error_reporting(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
+ "0x%x\n", err);
+ /* non-fatal, continue */
+ }
+
pci_set_master(pdev);
/* PCI config space info */
err = pci_save_state(pdev);
{
struct fec_enet_private *fep = netdev_priv(dev);
struct bufdesc *bdp;
+ void *bufaddr;
unsigned short status;
unsigned long flags;
status &= ~BD_ENET_TX_STATS;
/* Set buffer length and buffer pointer */
- bdp->cbd_bufaddr = __pa(skb->data);
+ bufaddr = skb->data;
bdp->cbd_datlen = skb->len;
/*
* 4-byte boundaries. Use bounce buffers to copy data
* and get it aligned. Ugh.
*/
- if (bdp->cbd_bufaddr & FEC_ALIGNMENT) {
+ if (((unsigned long) bufaddr) & FEC_ALIGNMENT) {
unsigned int index;
index = bdp - fep->tx_bd_base;
memcpy(fep->tx_bounce[index], (void *)skb->data, skb->len);
- bdp->cbd_bufaddr = __pa(fep->tx_bounce[index]);
+ bufaddr = fep->tx_bounce[index];
}
/* Save skb pointer */
/* Push the data cache so the CPM does not get stale memory
* data.
*/
- bdp->cbd_bufaddr = dma_map_single(&dev->dev, skb->data,
+ bdp->cbd_bufaddr = dma_map_single(&dev->dev, bufaddr,
FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
/* Send it on its way. Tell FEC it's ready, interrupt when done,
{
struct mpc52xx_fec_priv *priv = netdev_priv(dev);
struct bcom_fec_bd *bd;
+ unsigned long flags;
if (bcom_queue_full(priv->tx_dmatsk)) {
if (net_ratelimit())
return NETDEV_TX_BUSY;
}
- spin_lock_irq(&priv->lock);
+ spin_lock_irqsave(&priv->lock, flags);
dev->trans_start = jiffies;
bd = (struct bcom_fec_bd *)
netif_stop_queue(dev);
}
- spin_unlock_irq(&priv->lock);
+ spin_unlock_irqrestore(&priv->lock, flags);
return NETDEV_TX_OK;
}
struct gfar __iomem *regs = priv->regs;
int err = 0;
u32 rctrl = 0;
+ u32 tctrl = 0;
u32 attrs = 0;
gfar_write(®s->imask, IMASK_INIT_CLEAR);
rctrl |= RCTRL_PADDING(priv->padding);
}
+ /* keep vlan related bits if it's enabled */
+ if (priv->vlgrp) {
+ rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT;
+ tctrl |= TCTRL_VLINS;
+ }
+
/* Init rctrl based on our settings */
gfar_write(&priv->regs->rctrl, rctrl);
if (dev->features & NETIF_F_IP_CSUM)
- gfar_write(&priv->regs->tctrl, TCTRL_INIT_CSUM);
+ tctrl |= TCTRL_INIT_CSUM;
+
+ gfar_write(&priv->regs->tctrl, tctrl);
/* Set the extraction length and index */
attrs = ATTRELI_EL(priv->rx_stash_size) |
/* Enable VLAN tag extraction */
tempval = gfar_read(&priv->regs->rctrl);
- tempval |= RCTRL_VLEX;
tempval |= (RCTRL_VLEX | RCTRL_PRSDEP_INIT);
gfar_write(&priv->regs->rctrl, tempval);
} else {
free_irq(dev->emac_irq, dev);
+ netif_carrier_off(ndev);
+
return 0;
}
.ndo_stop = pxa_irda_stop,
.ndo_start_xmit = pxa_irda_hard_xmit,
.ndo_do_ioctl = pxa_irda_ioctl,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
};
static int pxa_irda_probe(struct platform_device *pdev)
if (!dev)
goto err_mem_3;
+ SET_NETDEV_DEV(dev, &pdev->dev);
si = netdev_priv(dev);
si->dev = &pdev->dev;
si->pdata = pdev->dev.platform_data;
IRDA_DEBUG(0, "%s()\n", __func__ );
- for (i=0; (io[i] < 2000) && (i < ARRAY_SIZE(dev_self)); i++) {
+ for (i=0; i < ARRAY_SIZE(dev_self) && io[i] < 2000; i++) {
if (w83977af_open(i, io[i], irq[i], dma[i]) == 0)
return 0;
}
u8 queue_index; /* needed for multiqueue queue management */
+#define IXGBE_RING_RX_PS_ENABLED (u8)(1)
+ u8 flags; /* per ring feature flags */
u16 head;
u16 tail;
struct ethtool_coalesce *ec)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_q_vector *q_vector;
int i;
if (ec->tx_max_coalesced_frames_irq)
adapter->itr_setting = 0;
}
- for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
- struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
- if (q_vector->txr_count && !q_vector->rxr_count)
- /* tx vector gets half the rate */
- q_vector->eitr = (adapter->eitr_param >> 1);
- else
- /* rx only or mixed */
- q_vector->eitr = adapter->eitr_param;
+ /* MSI/MSIx Interrupt Mode */
+ if (adapter->flags &
+ (IXGBE_FLAG_MSIX_ENABLED | IXGBE_FLAG_MSI_ENABLED)) {
+ int num_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+ for (i = 0; i < num_vectors; i++) {
+ q_vector = adapter->q_vector[i];
+ if (q_vector->txr_count && !q_vector->rxr_count)
+ /* tx vector gets half the rate */
+ q_vector->eitr = (adapter->eitr_param >> 1);
+ else
+ /* rx only or mixed */
+ q_vector->eitr = adapter->eitr_param;
+ ixgbe_write_eitr(q_vector);
+ }
+ /* Legacy Interrupt Mode */
+ } else {
+ q_vector = adapter->q_vector[0];
+ q_vector->eitr = adapter->eitr_param;
ixgbe_write_eitr(q_vector);
}
/* return 0 to bypass going to ULD for DDPed data */
if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_DDP)
rc = 0;
- else
+ else if (ddp->len)
rc = ddp->len;
}
skb_record_rx_queue(skb, ring->queue_index);
if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) {
- if (adapter->vlgrp && is_vlan && (tag != 0))
+ if (adapter->vlgrp && is_vlan && (tag & VLAN_VID_MASK))
vlan_gro_receive(napi, adapter->vlgrp, tag, skb);
else
napi_gro_receive(napi, skb);
} else {
- if (adapter->vlgrp && is_vlan && (tag != 0))
+ if (adapter->vlgrp && is_vlan && (tag & VLAN_VID_MASK))
vlan_hwaccel_rx(skb, adapter->vlgrp, tag);
else
netif_rx(skb);
rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i);
if (!bi->page_dma &&
- (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)) {
+ (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED)) {
if (!bi->page) {
bi->page = alloc_page(GFP_ATOMIC);
if (!bi->page) {
}
/* Refresh the desc even if buffer_addrs didn't change because
* each write-back erases this info. */
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+ if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
rx_desc->read.pkt_addr = cpu_to_le64(bi->page_dma);
rx_desc->read.hdr_addr = cpu_to_le64(bi->dma);
} else {
break;
(*work_done)++;
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+ if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
hdr_info = le16_to_cpu(ixgbe_get_hdr_info(rx_desc));
len = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >>
IXGBE_RXDADV_HDRBUFLEN_SHIFT;
rx_ring->stats.packets++;
rx_ring->stats.bytes += skb->len;
} else {
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+ if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
rx_buffer_info->skb = next_buffer->skb;
rx_buffer_info->dma = next_buffer->dma;
next_buffer->skb = skb;
#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
-static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, int index)
+static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *rx_ring)
{
- struct ixgbe_ring *rx_ring;
u32 srrctl;
- int queue0 = 0;
- unsigned long mask;
+ int index;
struct ixgbe_ring_feature *feature = adapter->ring_feature;
- if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- int dcb_i = feature[RING_F_DCB].indices;
- if (dcb_i == 8)
- queue0 = index >> 4;
- else if (dcb_i == 4)
- queue0 = index >> 5;
- else
- dev_err(&adapter->pdev->dev, "Invalid DCB "
- "configuration\n");
-#ifdef IXGBE_FCOE
- if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
- struct ixgbe_ring_feature *f;
-
- rx_ring = &adapter->rx_ring[queue0];
- f = &adapter->ring_feature[RING_F_FCOE];
- if ((queue0 == 0) && (index > rx_ring->reg_idx))
- queue0 = f->mask + index -
- rx_ring->reg_idx - 1;
- }
-#endif /* IXGBE_FCOE */
- } else {
- queue0 = index;
- }
- } else {
+ index = rx_ring->reg_idx;
+ if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+ unsigned long mask;
mask = (unsigned long) feature[RING_F_RSS].mask;
- queue0 = index & mask;
index = index & mask;
}
-
- rx_ring = &adapter->rx_ring[queue0];
-
srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(index));
srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
srrctl |= (IXGBE_RX_HDR_SIZE << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
IXGBE_SRRCTL_BSIZEHDR_MASK;
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+ if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
#if (PAGE_SIZE / 2) > IXGBE_MAX_RXBUFFER
srrctl |= IXGBE_MAX_RXBUFFER >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
#else
{
u64 rdba;
struct ixgbe_hw *hw = &adapter->hw;
+ struct ixgbe_ring *rx_ring;
struct net_device *netdev = adapter->netdev;
int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
int i, j;
/* Decide whether to use packet split mode or not */
adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
-#ifdef IXGBE_FCOE
- if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
- adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
-#endif /* IXGBE_FCOE */
-
/* Set the RX buffer length according to the mode */
if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
rx_buf_len = IXGBE_RX_HDR_SIZE;
* the Base and Length of the Rx Descriptor Ring
*/
for (i = 0; i < adapter->num_rx_queues; i++) {
- rdba = adapter->rx_ring[i].dma;
- j = adapter->rx_ring[i].reg_idx;
+ rx_ring = &adapter->rx_ring[i];
+ rdba = rx_ring->dma;
+ j = rx_ring->reg_idx;
IXGBE_WRITE_REG(hw, IXGBE_RDBAL(j), (rdba & DMA_BIT_MASK(32)));
IXGBE_WRITE_REG(hw, IXGBE_RDBAH(j), (rdba >> 32));
IXGBE_WRITE_REG(hw, IXGBE_RDLEN(j), rdlen);
IXGBE_WRITE_REG(hw, IXGBE_RDH(j), 0);
IXGBE_WRITE_REG(hw, IXGBE_RDT(j), 0);
- adapter->rx_ring[i].head = IXGBE_RDH(j);
- adapter->rx_ring[i].tail = IXGBE_RDT(j);
- adapter->rx_ring[i].rx_buf_len = rx_buf_len;
+ rx_ring->head = IXGBE_RDH(j);
+ rx_ring->tail = IXGBE_RDT(j);
+ rx_ring->rx_buf_len = rx_buf_len;
+
+ if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)
+ rx_ring->flags |= IXGBE_RING_RX_PS_ENABLED;
#ifdef IXGBE_FCOE
if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
struct ixgbe_ring_feature *f;
f = &adapter->ring_feature[RING_F_FCOE];
- if ((rx_buf_len < IXGBE_FCOE_JUMBO_FRAME_SIZE) &&
- (i >= f->mask) && (i < f->mask + f->indices))
- adapter->rx_ring[i].rx_buf_len =
- IXGBE_FCOE_JUMBO_FRAME_SIZE;
+ if ((i >= f->mask) && (i < f->mask + f->indices)) {
+ rx_ring->flags &= ~IXGBE_RING_RX_PS_ENABLED;
+ if (rx_buf_len < IXGBE_FCOE_JUMBO_FRAME_SIZE)
+ rx_ring->rx_buf_len =
+ IXGBE_FCOE_JUMBO_FRAME_SIZE;
+ }
}
#endif /* IXGBE_FCOE */
- ixgbe_configure_srrctl(adapter, j);
+ ixgbe_configure_srrctl(adapter, rx_ring);
}
if (hw->mac.type == ixgbe_mac_82598EB) {
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
/* Enable 82599 HW-RSC */
for (i = 0; i < adapter->num_rx_queues; i++) {
- j = adapter->rx_ring[i].reg_idx;
+ rx_ring = &adapter->rx_ring[i];
+ j = rx_ring->reg_idx;
rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j));
rscctrl |= IXGBE_RSCCTL_RSCEN;
/*
* total size of max desc * buf_len is not greater
* than 65535
*/
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+ if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
#if (MAX_SKB_FRAGS > 16)
rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
#elif (MAX_SKB_FRAGS > 8)
struct ixpdev_priv *ip = netdev_priv(dev);
struct ixpdev_tx_desc *desc;
int entry;
+ unsigned long flags;
if (unlikely(skb->len > PAGE_SIZE)) {
/* @@@ Count drops. */
dev->trans_start = jiffies;
- local_irq_disable();
+ local_irq_save(flags);
ip->tx_queue_entries++;
if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN)
netif_stop_queue(dev);
- local_irq_enable();
+ local_irq_restore(flags);
return 0;
}
dma_addr_t mapping;
unsigned int len, entry;
u32 ctrl;
+ unsigned long flags;
#ifdef DEBUG
int i;
#endif
len = skb->len;
- spin_lock_irq(&bp->lock);
+ spin_lock_irqsave(&bp->lock, flags);
/* This is a hard error, log it. */
if (TX_BUFFS_AVAIL(bp) < 1) {
netif_stop_queue(dev);
- spin_unlock_irq(&bp->lock);
+ spin_unlock_irqrestore(&bp->lock, flags);
dev_err(&bp->pdev->dev,
"BUG! Tx Ring full when queue awake!\n");
dev_dbg(&bp->pdev->dev, "tx_head = %u, tx_tail = %u\n",
if (TX_BUFFS_AVAIL(bp) < 1)
netif_stop_queue(dev);
- spin_unlock_irq(&bp->lock);
+ spin_unlock_irqrestore(&bp->lock, flags);
dev->trans_start = jiffies;
PCI_DMA_FROMDEVICE);
}
/* Adjust size of last fragment to match actual length */
- skb_frags_rx[nr - 1].size = length -
- priv->frag_info[nr - 1].frag_prefix_size;
+ if (nr > 0)
+ skb_frags_rx[nr - 1].size = length -
+ priv->frag_info[nr - 1].frag_prefix_size;
return nr;
fail:
{
struct mlx4_en_cq *cq = &priv->tx_cq[tx_ind];
struct mlx4_en_tx_ring *ring = &priv->tx_ring[tx_ind];
+ unsigned long flags;
/* If we don't have a pending timer, set one up to catch our recent
post in case the interface becomes idle */
/* Poll the CQ every mlx4_en_TX_MODER_POLL packets */
if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0)
- if (spin_trylock_irq(&ring->comp_lock)) {
+ if (spin_trylock_irqsave(&ring->comp_lock, flags)) {
mlx4_en_process_tx_cq(priv->dev, cq);
- spin_unlock_irq(&ring->comp_lock);
+ spin_unlock_irqrestore(&ring->comp_lock, flags);
}
}
u8 mc_enabled;
u8 max_mc_count;
u8 rss_supported;
- u8 resv2;
+ u8 link_changed;
u32 resv3;
u8 has_link_events;
kfree(recv_ctx->rds_rings);
skip_rds:
- if (recv_ctx->sds_rings == NULL)
- goto skip_sds;
-
- for(ring = 0; ring < adapter->max_sds_rings; ring++)
- recv_ctx->sds_rings[ring].consumer = 0;
-
-skip_sds:
if (adapter->tx_ring == NULL)
return;
MODULE_DEVICE_TABLE(pci, netxen_pci_tbl);
-static struct workqueue_struct *netxen_workq;
-#define SCHEDULE_WORK(tp) queue_work(netxen_workq, tp)
-#define FLUSH_SCHEDULED_WORK() flush_workqueue(netxen_workq)
-
static void netxen_watchdog(unsigned long);
static uint32_t crb_cmd_producer[4] = {
{
if (recv_ctx->sds_rings != NULL)
kfree(recv_ctx->sds_rings);
+
+ recv_ctx->sds_rings = NULL;
}
static int
return 0;
}
+static void
+netxen_napi_del(struct netxen_adapter *adapter)
+{
+ int ring;
+ struct nx_host_sds_ring *sds_ring;
+ struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
+
+ for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+ sds_ring = &recv_ctx->sds_rings[ring];
+ netif_napi_del(&sds_ring->napi);
+ }
+
+ netxen_free_sds_rings(&adapter->recv_ctx);
+}
+
static void
netxen_napi_enable(struct netxen_adapter *adapter)
{
change = 0;
shift = NXRD32(adapter, CRB_DMA_SHIFT);
- if (shift >= 32)
+ if (shift > 32)
return 0;
if (NX_IS_REVISION_P3(adapter->ahw.revision_id) && (shift > 9))
old_mask = pdev->dma_mask;
old_cmask = pdev->dev.coherent_dma_mask;
- mask = (1ULL<<(32+shift)) - 1;
+ mask = DMA_BIT_MASK(32+shift);
err = pci_set_dma_mask(pdev, mask);
if (err)
spin_unlock(&adapter->tx_clean_lock);
del_timer_sync(&adapter->watchdog_timer);
- FLUSH_SCHEDULED_WORK();
}
struct nx_host_tx_ring *tx_ring;
err = netxen_init_firmware(adapter);
- if (err != 0) {
- printk(KERN_ERR "Failed to init firmware\n");
- return -EIO;
- }
+ if (err)
+ return err;
+
+ err = netxen_napi_add(adapter, netdev);
+ if (err)
+ return err;
if (adapter->fw_major < 4)
adapter->max_rds_rings = 3;
netxen_free_hw_resources(adapter);
netxen_release_rx_buffers(adapter);
netxen_nic_free_irq(adapter);
+ netxen_napi_del(adapter);
netxen_free_sw_resources(adapter);
adapter->is_up = 0;
netdev->irq = adapter->msix_entries[0].vector;
- if (netxen_napi_add(adapter, netdev))
- goto err_out_disable_msi;
-
init_timer(&adapter->watchdog_timer);
adapter->watchdog_timer.function = &netxen_watchdog;
adapter->watchdog_timer.data = (unsigned long)adapter;
unregister_netdev(netdev);
+ cancel_work_sync(&adapter->watchdog_task);
+ cancel_work_sync(&adapter->tx_timeout_task);
+
if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
netxen_nic_detach(adapter);
}
netxen_free_adapter_offload(adapter);
netxen_teardown_intr(adapter);
- netxen_free_sds_rings(&adapter->recv_ctx);
netxen_cleanup_pci_map(adapter);
if (netif_running(netdev))
netxen_nic_down(adapter, netdev);
+ cancel_work_sync(&adapter->watchdog_task);
+ cancel_work_sync(&adapter->tx_timeout_task);
+
if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC)
netxen_nic_detach(adapter);
"%s: Device temperature %d degrees C exceeds"
" maximum allowed. Hardware has been shut down.\n",
netdev->name, temp_val);
-
- netif_device_detach(netdev);
- netxen_nic_down(adapter, netdev);
- netxen_nic_detach(adapter);
-
rv = 1;
} else if (temp_state == NX_TEMP_WARN) {
if (adapter->temp == NX_TEMP_NORMAL) {
netif_carrier_off(netdev);
netif_stop_queue(netdev);
}
-
- if (!adapter->has_link_events)
- netxen_nic_set_link_parameters(adapter);
-
+ adapter->link_changed = !adapter->has_link_events;
} else if (!adapter->ahw.linkup && linkup) {
printk(KERN_INFO "%s: %s NIC Link is up\n",
netxen_nic_driver_name, netdev->name);
netif_carrier_on(netdev);
netif_wake_queue(netdev);
}
-
- if (!adapter->has_link_events)
- netxen_nic_set_link_parameters(adapter);
+ adapter->link_changed = !adapter->has_link_events;
}
}
netxen_advert_link_change(adapter, linkup);
}
+static void netxen_nic_thermal_shutdown(struct netxen_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ netif_device_detach(netdev);
+ netxen_nic_down(adapter, netdev);
+ netxen_nic_detach(adapter);
+}
+
static void netxen_watchdog(unsigned long v)
{
struct netxen_adapter *adapter = (struct netxen_adapter *)v;
- SCHEDULE_WORK(&adapter->watchdog_task);
+ if (netxen_nic_check_temp(adapter))
+ goto do_sched;
+
+ if (!adapter->has_link_events) {
+ netxen_nic_handle_phy_intr(adapter);
+
+ if (adapter->link_changed)
+ goto do_sched;
+ }
+
+ if (netif_running(adapter->netdev))
+ mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
+
+ return;
+
+do_sched:
+ schedule_work(&adapter->watchdog_task);
}
void netxen_watchdog_task(struct work_struct *work)
struct netxen_adapter *adapter =
container_of(work, struct netxen_adapter, watchdog_task);
- if (netxen_nic_check_temp(adapter))
+ if (adapter->temp == NX_TEMP_PANIC) {
+ netxen_nic_thermal_shutdown(adapter);
return;
+ }
- if (!adapter->has_link_events)
- netxen_nic_handle_phy_intr(adapter);
+ if (adapter->link_changed)
+ netxen_nic_set_link_parameters(adapter);
if (netif_running(adapter->netdev))
mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
static void netxen_tx_timeout(struct net_device *netdev)
{
- struct netxen_adapter *adapter = (struct netxen_adapter *)
- netdev_priv(netdev);
- SCHEDULE_WORK(&adapter->tx_timeout_task);
+ struct netxen_adapter *adapter = netdev_priv(netdev);
+ schedule_work(&adapter->tx_timeout_task);
}
static void netxen_tx_timeout_task(struct work_struct *work)
{
printk(KERN_INFO "%s\n", netxen_nic_driver_string);
- if ((netxen_workq = create_singlethread_workqueue("netxen")) == NULL)
- return -ENOMEM;
-
return pci_register_driver(&netxen_driver);
}
static void __exit netxen_exit_module(void)
{
pci_unregister_driver(&netxen_driver);
- destroy_workqueue(netxen_workq);
}
module_exit(netxen_exit_module);
lp->chip_version = chip_version;
lp->msg_enable = pcnet32_debug;
if ((cards_found >= MAX_UNITS)
- || (options[cards_found] > sizeof(options_mapping)))
+ || (options[cards_found] >= sizeof(options_mapping)))
lp->options = PCNET32_PORT_ASEL;
else
lp->options = options_mapping[options[cards_found]];
/* this enables an interrupt in the interrupt mask register */
#define SMC_ENABLE_INT(lp, x) do { \
unsigned char mask; \
- spin_lock_irq(&lp->lock); \
+ unsigned long smc_enable_flags; \
+ spin_lock_irqsave(&lp->lock, smc_enable_flags); \
mask = SMC_GET_INT_MASK(lp); \
mask |= (x); \
SMC_SET_INT_MASK(lp, mask); \
- spin_unlock_irq(&lp->lock); \
+ spin_unlock_irqrestore(&lp->lock, smc_enable_flags); \
} while (0)
/* this disables an interrupt from the interrupt mask register */
#define SMC_DISABLE_INT(lp, x) do { \
unsigned char mask; \
- spin_lock_irq(&lp->lock); \
+ unsigned long smc_disable_flags; \
+ spin_lock_irqsave(&lp->lock, smc_disable_flags); \
mask = SMC_GET_INT_MASK(lp); \
mask &= ~(x); \
SMC_SET_INT_MASK(lp, mask); \
- spin_unlock_irq(&lp->lock); \
+ spin_unlock_irqrestore(&lp->lock, smc_disable_flags); \
} while (0)
/*
* any other concurrent access and C would always interrupt B. But life
* isn't that easy in a SMP world...
*/
-#define smc_special_trylock(lock) \
+#define smc_special_trylock(lock, flags) \
({ \
int __ret; \
- local_irq_disable(); \
+ local_irq_save(flags); \
__ret = spin_trylock(lock); \
if (!__ret) \
- local_irq_enable(); \
+ local_irq_restore(flags); \
__ret; \
})
-#define smc_special_lock(lock) spin_lock_irq(lock)
-#define smc_special_unlock(lock) spin_unlock_irq(lock)
+#define smc_special_lock(lock, flags) spin_lock_irq(lock, flags)
+#define smc_special_unlock(lock, flags) spin_unlock_irqrestore(lock, flags)
#else
-#define smc_special_trylock(lock) (1)
-#define smc_special_lock(lock) do { } while (0)
-#define smc_special_unlock(lock) do { } while (0)
+#define smc_special_trylock(lock, flags) (1)
+#define smc_special_lock(lock, flags) do { } while (0)
+#define smc_special_unlock(lock, flags) do { } while (0)
#endif
/*
struct sk_buff *skb;
unsigned int packet_no, len;
unsigned char *buf;
+ unsigned long flags;
DBG(3, "%s: %s\n", dev->name, __func__);
- if (!smc_special_trylock(&lp->lock)) {
+ if (!smc_special_trylock(&lp->lock, flags)) {
netif_stop_queue(dev);
tasklet_schedule(&lp->tx_task);
return;
skb = lp->pending_tx_skb;
if (unlikely(!skb)) {
- smc_special_unlock(&lp->lock);
+ smc_special_unlock(&lp->lock, flags);
return;
}
lp->pending_tx_skb = NULL;
printk("%s: Memory allocation failed.\n", dev->name);
dev->stats.tx_errors++;
dev->stats.tx_fifo_errors++;
- smc_special_unlock(&lp->lock);
+ smc_special_unlock(&lp->lock, flags);
goto done;
}
/* queue the packet for TX */
SMC_SET_MMU_CMD(lp, MC_ENQUEUE);
- smc_special_unlock(&lp->lock);
+ smc_special_unlock(&lp->lock, flags);
dev->trans_start = jiffies;
dev->stats.tx_packets++;
struct smc_local *lp = netdev_priv(dev);
void __iomem *ioaddr = lp->base;
unsigned int numPages, poll_count, status;
+ unsigned long flags;
DBG(3, "%s: %s\n", dev->name, __func__);
return 0;
}
- smc_special_lock(&lp->lock);
+ smc_special_lock(&lp->lock, flags);
/* now, try to allocate the memory */
SMC_SET_MMU_CMD(lp, MC_ALLOC | numPages);
}
} while (--poll_count);
- smc_special_unlock(&lp->lock);
+ smc_special_unlock(&lp->lock, flags);
lp->pending_tx_skb = skb;
if (!poll_count) {
int entry;
u32 flag;
dma_addr_t mapping;
+ unsigned long flags;
- spin_lock_irq(&tp->lock);
+ spin_lock_irqsave(&tp->lock, flags);
/* Calculate the next Tx descriptor entry. */
entry = tp->cur_tx % TX_RING_SIZE;
/* Trigger an immediate transmit demand. */
iowrite32(0, tp->base_addr + CSR1);
- spin_unlock_irq(&tp->lock);
+ spin_unlock_irqrestore(&tp->lock, flags);
dev->trans_start = jiffies;
return err;
}
-static int tun_get_iff(struct net *net, struct file *file, struct ifreq *ifr)
+static int tun_get_iff(struct net *net, struct tun_struct *tun,
+ struct ifreq *ifr)
{
- struct tun_struct *tun = tun_get(file);
-
- if (!tun)
- return -EBADFD;
-
DBG(KERN_INFO "%s: tun_get_iff\n", tun->dev->name);
strcpy(ifr->ifr_name, tun->dev->name);
ifr->ifr_flags = tun_flags(tun);
- tun_put(tun);
return 0;
}
return 0;
}
-static int tun_chr_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long tun_chr_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
struct tun_file *tfile = file->private_data;
struct tun_struct *tun;
(unsigned int __user*)argp);
}
+ rtnl_lock();
+
tun = __tun_get(tfile);
if (cmd == TUNSETIFF && !tun) {
- int err;
-
ifr.ifr_name[IFNAMSIZ-1] = '\0';
- rtnl_lock();
- err = tun_set_iff(tfile->net, file, &ifr);
- rtnl_unlock();
+ ret = tun_set_iff(tfile->net, file, &ifr);
- if (err)
- return err;
+ if (ret)
+ goto unlock;
if (copy_to_user(argp, &ifr, sizeof(ifr)))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ goto unlock;
}
-
+ ret = -EBADFD;
if (!tun)
- return -EBADFD;
+ goto unlock;
DBG(KERN_INFO "%s: tun_chr_ioctl cmd %d\n", tun->dev->name, cmd);
ret = 0;
switch (cmd) {
case TUNGETIFF:
- ret = tun_get_iff(current->nsproxy->net_ns, file, &ifr);
+ ret = tun_get_iff(current->nsproxy->net_ns, tun, &ifr);
if (ret)
break;
case TUNSETLINK:
/* Only allow setting the type when the interface is down */
- rtnl_lock();
if (tun->dev->flags & IFF_UP) {
DBG(KERN_INFO "%s: Linktype set failed because interface is up\n",
tun->dev->name);
DBG(KERN_INFO "%s: linktype set to %d\n", tun->dev->name, tun->dev->type);
ret = 0;
}
- rtnl_unlock();
break;
#ifdef TUN_DEBUG
break;
#endif
case TUNSETOFFLOAD:
- rtnl_lock();
ret = set_offload(tun->dev, arg);
- rtnl_unlock();
break;
case TUNSETTXFILTER:
ret = -EINVAL;
if ((tun->flags & TUN_TYPE_MASK) != TUN_TAP_DEV)
break;
- rtnl_lock();
ret = update_filter(&tun->txflt, (void __user *)arg);
- rtnl_unlock();
break;
case SIOCGIFHWADDR:
DBG(KERN_DEBUG "%s: set hw address: %pM\n",
tun->dev->name, ifr.ifr_hwaddr.sa_data);
- rtnl_lock();
ret = dev_set_mac_address(tun->dev, &ifr.ifr_hwaddr);
- rtnl_unlock();
break;
case TUNGETSNDBUF:
break;
};
- tun_put(tun);
+unlock:
+ rtnl_unlock();
+ if (tun)
+ tun_put(tun);
return ret;
}
.write = do_sync_write,
.aio_write = tun_chr_aio_write,
.poll = tun_chr_poll,
- .ioctl = tun_chr_ioctl,
+ .unlocked_ioctl = tun_chr_ioctl,
.open = tun_chr_open,
.release = tun_chr_close,
.fasync = tun_chr_fasync
u8 __iomem *bd; /* BD pointer */
u32 bd_status;
u8 txQ = 0;
+ unsigned long flags;
ugeth_vdbg("%s: IN", __func__);
- spin_lock_irq(&ugeth->lock);
+ spin_lock_irqsave(&ugeth->lock, flags);
dev->stats.tx_bytes += skb->len;
uccf = ugeth->uccf;
out_be16(uccf->p_utodr, UCC_FAST_TOD);
#endif
- spin_unlock_irq(&ugeth->lock);
+ spin_unlock_irqrestore(&ugeth->lock, flags);
return 0;
}
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "IO DATA USB ETX-US2", VENDOR_IODATA, 0x092a,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a,
DEFAULT_GPIO_RESET)
PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002,
struct rhine_private *rp = netdev_priv(dev);
void __iomem *ioaddr = rp->base;
unsigned entry;
+ unsigned long flags;
/* Caution: the write order is important here, set the field
with the "ownership" bits last. */
cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
/* lock eth irq */
- spin_lock_irq(&rp->lock);
+ spin_lock_irqsave(&rp->lock, flags);
wmb();
rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
wmb();
dev->trans_start = jiffies;
- spin_unlock_irq(&rp->lock);
+ spin_unlock_irqrestore(&rp->lock, flags);
if (debug > 4) {
printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
* mode
*/
if (vptr->rev_id < REV_ID_VT3216_A0) {
- if (vptr->mii_status | VELOCITY_DUPLEX_FULL)
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR);
else
BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR);
int ret;
mutex_lock(&ar->mutex);
- if ((param) && !(queue > __AR9170_NUM_TXQ)) {
+ if (queue < __AR9170_NUM_TXQ) {
memcpy(&ar->edcf[ar9170_qos_hwmap[queue]],
param, sizeof(*param));
ret = ar9170_set_qos(ar);
- } else
+ } else {
ret = -EINVAL;
+ }
mutex_unlock(&ar->mutex);
return ret;
err = request_firmware(&aru->init_values, "ar9170-1.fw",
&aru->udev->dev);
+ if (err) {
+ dev_err(&aru->udev->dev, "file with init values not found.\n");
+ return err;
+ }
err = request_firmware(&aru->firmware, "ar9170-2.fw", &aru->udev->dev);
if (err) {
release_firmware(aru->init_values);
- dev_err(&aru->udev->dev, "file with init values not found.\n");
+ dev_err(&aru->udev->dev, "firmware file not found.\n");
return err;
}
};
u8 channel;
- while (channel_index < IPW_SCAN_CHANNELS) {
+ while (channel_index < IPW_SCAN_CHANNELS - 1) {
channel =
priv->speed_scan[priv->speed_scan_pos];
if (channel == 0) {
/* Copyright (C) 2006, Red Hat, Inc. */
#include <linux/types.h>
-#include <linux/kernel.h>
#include <linux/etherdevice.h>
#include <linux/ieee80211.h>
#include <linux/if_arp.h>
u16 *rates_size)
{
u8 *card_rates = lbs_bg_rates;
+ size_t num_card_rates = sizeof(lbs_bg_rates);
int ret = 0, i, j;
- u8 tmp[(ARRAY_SIZE(lbs_bg_rates) - 1) * (*rates_size - 1)];
+ u8 tmp[30];
size_t tmp_size = 0;
/* For each rate in card_rates that exists in rate1, copy to tmp */
- for (i = 0; i < ARRAY_SIZE(lbs_bg_rates) && card_rates[i]; i++) {
- for (j = 0; j < *rates_size && rates[j]; j++) {
+ for (i = 0; card_rates[i] && (i < num_card_rates); i++) {
+ for (j = 0; rates[j] && (j < *rates_size); j++) {
if (rates[j] == card_rates[i])
tmp[tmp_size++] = card_rates[i];
}
}
lbs_deb_hex(LBS_DEB_JOIN, "AP rates ", rates, *rates_size);
- lbs_deb_hex(LBS_DEB_JOIN, "card rates ", card_rates,
- ARRAY_SIZE(lbs_bg_rates));
+ lbs_deb_hex(LBS_DEB_JOIN, "card rates ", card_rates, num_card_rates);
lbs_deb_hex(LBS_DEB_JOIN, "common rates", tmp, tmp_size);
lbs_deb_join("TX data rate 0x%02x\n", priv->cur_rate);
lbs_pr_alert("Previously set fixed data rate %#x isn't "
"compatible with the network.\n", priv->cur_rate);
ret = -1;
+ goto done;
}
+ ret = 0;
+
done:
memset(rates, 0, *rates_size);
*rates_size = min_t(int, tmp_size, *rates_size);
rates = (struct mrvl_ie_rates_param_set *) pos;
rates->header.type = cpu_to_le16(TLV_TYPE_RATES);
memcpy(&rates->rates, &bss->rates, MAX_RATES);
- tmplen = min_t(u16, ARRAY_SIZE(rates->rates), MAX_RATES);
+ tmplen = MAX_RATES;
if (get_common_rates(priv, rates->rates, &tmplen)) {
ret = -1;
goto done;
/* Copy Data rates from the rates recorded in scan response */
memset(cmd.bss.rates, 0, sizeof(cmd.bss.rates));
- ratesize = min_t(u16, ARRAY_SIZE(cmd.bss.rates), MAX_RATES);
+ ratesize = min_t(u16, sizeof(cmd.bss.rates), MAX_RATES);
memcpy(cmd.bss.rates, bss->rates, ratesize);
if (get_common_rates(priv, cmd.bss.rates, &ratesize)) {
lbs_deb_join("ADHOC_JOIN: get_common_rates returned error.\n");
u8 bss_type;
/* BSS number */
u8 bss_num;
- } bss;
- } u;
+ } __attribute__ ((packed)) bss;
+ } __attribute__ ((packed)) u;
/* SNR */
u8 snr;
*/
};
-#define MWL8K_VIF(_vif) (struct mwl8k_vif *)(&((_vif)->drv_priv))
+#define MWL8K_VIF(_vif) ((struct mwl8k_vif *)&((_vif)->drv_priv))
static const struct ieee80211_channel mwl8k_channels[] = {
{ .center_freq = 2412, .hw_value = 1, },
rmb();
skb = rxq->rx_skb[rxq->rx_head];
+ if (skb == NULL)
+ break;
rxq->rx_skb[rxq->rx_head] = NULL;
rxq->rx_head = (rxq->rx_head + 1) % MWL8K_RX_DESCS;
timeout = wait_for_completion_timeout(&cmd_wait,
msecs_to_jiffies(MWL8K_CMD_TIMEOUT_MS));
+ pci_unmap_single(priv->pdev, dma_addr, dma_size,
+ PCI_DMA_BIDIRECTIONAL);
+
result = &cmd->result;
if (!timeout) {
spin_lock_irq(&priv->fw_lock);
*result);
}
- pci_unmap_single(priv->pdev, dma_addr, dma_size,
- PCI_DMA_BIDIRECTIONAL);
return rc;
}
memset(cmd->perm_addr, 0xff, sizeof(cmd->perm_addr));
cmd->ps_cookie = cpu_to_le32(priv->cookie_dma);
cmd->rx_queue_ptr = cpu_to_le32(priv->rxq[0].rx_desc_dma);
- cmd->num_tx_queues = MWL8K_TX_QUEUES;
+ cmd->num_tx_queues = cpu_to_le32(MWL8K_TX_QUEUES);
for (i = 0; i < MWL8K_TX_QUEUES; i++)
cmd->tx_queue_ptrs[i] = cpu_to_le32(priv->txq[i].tx_desc_dma);
- cmd->num_tx_desc_per_queue = MWL8K_TX_DESCS;
- cmd->total_rx_desc = MWL8K_RX_DESCS;
+ cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS);
+ cmd->total_rx_desc = cpu_to_le32(MWL8K_RX_DESCS);
rc = mwl8k_post_cmd(hw, &cmd->header);
if (!rc) {
SET_IEEE80211_PERM_ADDR(hw, cmd->perm_addr);
priv->num_mcaddrs = le16_to_cpu(cmd->num_mcaddrs);
- priv->fw_rev = cmd->fw_rev;
+ priv->fw_rev = le32_to_cpu(cmd->fw_rev);
priv->hw_rev = cmd->hw_rev;
priv->region_code = le16_to_cpu(cmd->region_code);
}
struct dev_addr_list *mclist = worker->mclist;
struct mwl8k_priv *priv = hw->priv;
- struct mwl8k_vif *mv_vif;
int rc = 0;
if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
rc = mwl8k_cmd_set_pre_scan(hw);
else {
- mv_vif = MWL8K_VIF(priv->vif);
- rc = mwl8k_cmd_set_post_scan(hw, mv_vif->bssid);
+ u8 *bssid;
+
+ bssid = "\x00\x00\x00\x00\x00\x00";
+ if (priv->vif != NULL)
+ bssid = MWL8K_VIF(priv->vif)->bssid;
+
+ rc = mwl8k_cmd_set_post_scan(hw, bssid);
}
}
ieee80211_stop_queues(hw);
+ ieee80211_unregister_hw(hw);
+
/* Remove tx reclaim tasklet */
tasklet_kill(&priv->tx_reclaim_task);
for (i = 0; i < MWL8K_TX_QUEUES; i++)
mwl8k_txq_reclaim(hw, i, 1);
- ieee80211_unregister_hw(hw);
-
for (i = 0; i < MWL8K_TX_QUEUES; i++)
mwl8k_txq_deinit(hw, i);
int err = 0;
u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE];
- if ((key < 0) || (key > 4))
+ if ((key < 0) || (key >= 4))
return -EINVAL;
err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV,
static inline void rt2x00_rf_read(struct rt2x00_dev *rt2x00dev,
const unsigned int word, u32 *data)
{
- *data = rt2x00dev->rf[word];
+ BUG_ON(word < 1 || word > rt2x00dev->ops->rf_size / sizeof(u32));
+ *data = rt2x00dev->rf[word - 1];
}
static inline void rt2x00_rf_write(struct rt2x00_dev *rt2x00dev,
const unsigned int word, u32 data)
{
- rt2x00dev->rf[word] = data;
+ BUG_ON(word < 1 || word > rt2x00dev->ops->rf_size / sizeof(u32));
+ rt2x00dev->rf[word - 1] = data;
}
/*
priv->aifsn[3] = 3; /* AIFSN[AC_BE] */
rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0);
+ /* ENEDCA flag must always be set, transmit issues? */
+ rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA);
+
return 0;
}
rtl818x_iowrite8(priv, &priv->map->BSSID[i],
info->bssid[i]);
+ if (priv->is_rtl8187b)
+ reg = RTL818X_MSR_ENEDCA;
+ else
+ reg = 0;
+
if (is_valid_ether_addr(info->bssid)) {
- reg = RTL818X_MSR_INFRA;
- if (priv->is_rtl8187b)
- reg |= RTL818X_MSR_ENEDCA;
+ reg |= RTL818X_MSR_INFRA;
rtl818x_iowrite8(priv, &priv->map->MSR, reg);
} else {
- reg = RTL818X_MSR_NO_LINK;
+ reg |= RTL818X_MSR_NO_LINK;
rtl818x_iowrite8(priv, &priv->map->MSR, reg);
}
static int yellowfin_open(struct net_device *dev);
static void yellowfin_timer(unsigned long data);
static void yellowfin_tx_timeout(struct net_device *dev);
-static void yellowfin_init_ring(struct net_device *dev);
+static int yellowfin_init_ring(struct net_device *dev);
static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance);
static int yellowfin_rx(struct net_device *dev);
{
struct yellowfin_private *yp = netdev_priv(dev);
void __iomem *ioaddr = yp->base;
- int i;
+ int i, ret;
/* Reset the chip. */
iowrite32(0x80000000, ioaddr + DMACtrl);
- i = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
- if (i) return i;
+ ret = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
+ if (ret)
+ return ret;
if (yellowfin_debug > 1)
printk(KERN_DEBUG "%s: yellowfin_open() irq %d.\n",
dev->name, dev->irq);
- yellowfin_init_ring(dev);
+ ret = yellowfin_init_ring(dev);
+ if (ret) {
+ free_irq(dev->irq, dev);
+ return ret;
+ }
iowrite32(yp->rx_ring_dma, ioaddr + RxPtr);
iowrite32(yp->tx_ring_dma, ioaddr + TxPtr);
}
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
-static void yellowfin_init_ring(struct net_device *dev)
+static int yellowfin_init_ring(struct net_device *dev)
{
struct yellowfin_private *yp = netdev_priv(dev);
- int i;
+ int i, j;
yp->tx_full = 0;
yp->cur_rx = yp->cur_tx = 0;
yp->rx_ring[i].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
}
+ if (i != RX_RING_SIZE) {
+ for (j = 0; j < i; j++)
+ dev_kfree_skb(yp->rx_skbuff[j]);
+ return -ENOMEM;
+ }
yp->rx_ring[i-1].dbdma_cmd = cpu_to_le32(CMD_STOP);
yp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
yp->tx_ring[--i].dbdma_cmd = cpu_to_le32(CMD_STOP | BRANCH_ALWAYS);
#else
{
- int j;
-
/* Tx ring needs a pair of descriptors, the second for the status. */
for (i = 0; i < TX_RING_SIZE; i++) {
j = 2*i;
}
#endif
yp->tx_tail_desc = &yp->tx_status[0];
- return;
+ return 0;
}
static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev)
for (i = ARRAY_SIZE(cards)-1; i >= 0; i--)
if (z->id == cards[i].id)
break;
+ if (i < 0)
+ return -ENODEV;
+
board = z->resource.start;
ioaddr = board+cards[i].offset;
dev = alloc_ei_netdev();
return error;
}
- return pci_dev->state_saved ? pci_restore_state(pci_dev) : 0;
+ return pci_restore_state(pci_dev);
}
static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
int i;
u32 val;
+ if (!dev->state_saved)
+ return 0;
/* PCI Express register must be restored first */
pci_restore_pcie_state(dev);
struct dasd_device *base;
block = bdev->bd_disk->private_data;
- base = block->base;
if (!block)
return -ENODEV;
+ base = block->base;
if (!base->discipline ||
!base->discipline->fill_geometry)
cdev = io_subchannel_allocate_dev(sch);
if (!IS_ERR(cdev)) {
ret = io_subchannel_initialize_dev(sch, cdev);
- if (ret) {
- kfree(cdev);
+ if (ret)
cdev = ERR_PTR(ret);
- }
}
return cdev;
}
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
}
+/**
+ * mpt2sas_base_start_watchdog - start the fault_reset_work_q
+ * @ioc: pointer to scsi command object
+ * Context: sleep.
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc)
+{
+ unsigned long flags;
+
+ if (ioc->fault_reset_work_q)
+ return;
+
+ /* initialize fault polling */
+ INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
+ snprintf(ioc->fault_reset_work_q_name,
+ sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
+ ioc->fault_reset_work_q =
+ create_singlethread_workqueue(ioc->fault_reset_work_q_name);
+ if (!ioc->fault_reset_work_q) {
+ printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n",
+ ioc->name, __func__, __LINE__);
+ return;
+ }
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ if (ioc->fault_reset_work_q)
+ queue_delayed_work(ioc->fault_reset_work_q,
+ &ioc->fault_reset_work,
+ msecs_to_jiffies(FAULT_POLLING_INTERVAL));
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+}
+
+/**
+ * mpt2sas_base_stop_watchdog - stop the fault_reset_work_q
+ * @ioc: pointer to scsi command object
+ * Context: sleep.
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc)
+{
+ unsigned long flags;
+ struct workqueue_struct *wq;
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ wq = ioc->fault_reset_work_q;
+ ioc->fault_reset_work_q = NULL;
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+ if (wq) {
+ if (!cancel_delayed_work(&ioc->fault_reset_work))
+ flush_workqueue(wq);
+ destroy_workqueue(wq);
+ }
+}
+
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
/**
* _base_sas_ioc_info - verbose translation of the ioc status
if (sas_loginfo.dw.bus_type != 3 /*SAS*/)
return;
+ /* each nexus loss loginfo */
+ if (log_info == 0x31170000)
+ return;
+
/* eat the loginfos associated with task aborts */
if (ioc->ignore_loginfos && (log_info == 30050000 || log_info ==
0x31140000 || log_info == 0x31130000))
}
}
- pci_set_drvdata(pdev, ioc->shost);
_base_mask_interrupts(ioc);
r = _base_enable_msix(ioc);
if (r)
ioc->pci_irq = -1;
pci_release_selected_regions(ioc->pdev, ioc->bars);
pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
return r;
}
ioc->chip_phys = 0;
pci_release_selected_regions(ioc->pdev, ioc->bars);
pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
return;
}
mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
{
int r, i;
- unsigned long flags;
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
if (r)
return r;
+ pci_set_drvdata(ioc->pdev, ioc->shost);
r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
if (r)
goto out_free_resources;
if (r)
goto out_free_resources;
- /* initialize fault polling */
- INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
- snprintf(ioc->fault_reset_work_q_name,
- sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
- ioc->fault_reset_work_q =
- create_singlethread_workqueue(ioc->fault_reset_work_q_name);
- if (!ioc->fault_reset_work_q) {
- printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n",
- ioc->name, __func__, __LINE__);
- goto out_free_resources;
- }
- spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- if (ioc->fault_reset_work_q)
- queue_delayed_work(ioc->fault_reset_work_q,
- &ioc->fault_reset_work,
- msecs_to_jiffies(FAULT_POLLING_INTERVAL));
- spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+ mpt2sas_base_start_watchdog(ioc);
return 0;
out_free_resources:
ioc->remove_host = 1;
mpt2sas_base_free_resources(ioc);
_base_release_memory_pools(ioc);
+ pci_set_drvdata(ioc->pdev, NULL);
kfree(ioc->tm_cmds.reply);
kfree(ioc->transport_cmds.reply);
kfree(ioc->config_cmds.reply);
void
mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc)
{
- unsigned long flags;
- struct workqueue_struct *wq;
dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
- spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- wq = ioc->fault_reset_work_q;
- ioc->fault_reset_work_q = NULL;
- spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
- if (!cancel_delayed_work(&ioc->fault_reset_work))
- flush_workqueue(wq);
- destroy_workqueue(wq);
-
+ mpt2sas_base_stop_watchdog(ioc);
mpt2sas_base_free_resources(ioc);
_base_release_memory_pools(ioc);
+ pci_set_drvdata(ioc->pdev, NULL);
kfree(ioc->pfacts);
kfree(ioc->ctl_cmds.reply);
kfree(ioc->base_cmds.reply);
#define MPT2SAS_DRIVER_NAME "mpt2sas"
#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "01.100.03.00"
+#define MPT2SAS_DRIVER_VERSION "01.100.04.00"
#define MPT2SAS_MAJOR_VERSION 01
#define MPT2SAS_MINOR_VERSION 100
-#define MPT2SAS_BUILD_VERSION 03
+#define MPT2SAS_BUILD_VERSION 04
#define MPT2SAS_RELEASE_VERSION 00
/*
/* base shared API */
extern struct list_head mpt2sas_ioc_list;
+void mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc);
+void mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc);
int mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc);
void mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc);
Mpi2ConfigRequest_t *config_request;
int r;
u8 retry_count;
- u8 issue_reset;
+ u8 issue_host_reset = 0;
u16 wait_state_count;
+ mutex_lock(&ioc->config_cmds.mutex);
if (ioc->config_cmds.status != MPT2_CMD_NOT_USED) {
printk(MPT2SAS_ERR_FMT "%s: config_cmd in use\n",
ioc->name, __func__);
+ mutex_unlock(&ioc->config_cmds.mutex);
return -EAGAIN;
}
retry_count = 0;
retry_config:
+ if (retry_count) {
+ if (retry_count > 2) /* attempt only 2 retries */
+ return -EFAULT;
+ printk(MPT2SAS_INFO_FMT "%s: attempting retry (%d)\n",
+ ioc->name, __func__, retry_count);
+ }
wait_state_count = 0;
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
printk(MPT2SAS_ERR_FMT
"%s: failed due to ioc not operational\n",
ioc->name, __func__);
- ioc->config_cmds.status = MPT2_CMD_NOT_USED;
- return -EFAULT;
+ r = -EFAULT;
+ goto out;
}
ssleep(1);
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
- ioc->config_cmds.status = MPT2_CMD_NOT_USED;
- return -EAGAIN;
+ r = -EAGAIN;
+ goto out;
}
r = 0;
ioc->name, __func__);
_debug_dump_mf(mpi_request,
sizeof(Mpi2ConfigRequest_t)/4);
- if (!(ioc->config_cmds.status & MPT2_CMD_RESET))
- issue_reset = 1;
- goto issue_host_reset;
+ retry_count++;
+ if (ioc->config_cmds.smid == smid)
+ mpt2sas_base_free_smid(ioc, smid);
+ if ((ioc->shost_recovery) ||
+ (ioc->config_cmds.status & MPT2_CMD_RESET))
+ goto retry_config;
+ issue_host_reset = 1;
+ r = -EFAULT;
+ goto out;
}
if (ioc->config_cmds.status & MPT2_CMD_REPLY_VALID)
memcpy(mpi_reply, ioc->config_cmds.reply,
if (retry_count)
printk(MPT2SAS_INFO_FMT "%s: retry completed!!\n",
ioc->name, __func__);
+out:
ioc->config_cmds.status = MPT2_CMD_NOT_USED;
- return r;
-
- issue_host_reset:
- if (issue_reset)
+ mutex_unlock(&ioc->config_cmds.mutex);
+ if (issue_host_reset)
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
- ioc->config_cmds.status = MPT2_CMD_NOT_USED;
- if (!retry_count) {
- printk(MPT2SAS_INFO_FMT "%s: attempting retry\n",
- ioc->name, __func__);
- retry_count++;
- goto retry_config;
- }
- return -EFAULT;
+ return r;
}
/**
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2ManufacturingPage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2BiosPage2_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2BiosPage3_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2IOUnitPage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2IOUnitPage1_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2IOCPage8_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2SasDevicePage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2SasDevicePage1_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
Mpi2ConfigReply_t mpi_reply;
Mpi2SasIOUnitPage0_t config_page;
- mutex_lock(&ioc->config_cmds.mutex);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
Mpi2ConfigRequest_t mpi_request;
int r;
struct config_request mem;
-
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sz);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sz);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2ExpanderPage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2ExpanderPage1_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2SasEnclosurePage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2SasPhyPage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2SasPhyPage1_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2RaidVolPage1_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
struct config_request mem;
u16 ioc_status;
- mutex_lock(&ioc->config_cmds.mutex);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
*num_pds = 0;
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
memset(config_page, 0, sz);
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
memset(config_page, 0, sizeof(Mpi2RaidPhysDiskPage0_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
struct config_request mem;
u16 ioc_status;
- mutex_lock(&ioc->config_cmds.mutex);
*volume_handle = 0;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
char *desc_ioc_state = NULL;
char *desc_scsi_status = NULL;
char *desc_scsi_state = ioc->tmp_string;
+ u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
+
+ if (log_info == 0x31170000)
+ return;
switch (ioc_status) {
case MPI2_IOCSTATUS_SUCCESS:
__le64 sas_address;
int i;
unsigned long flags;
- struct _sas_port *mpt2sas_port;
+ struct _sas_port *mpt2sas_port = NULL;
int rc = 0;
if (!handle)
&expander_pg1, i, handle))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
- continue;
+ rc = -1;
+ goto out_fail;
}
sas_expander->phy[i].handle = handle;
sas_expander->phy[i].phy_id = i;
- mpt2sas_transport_add_expander_phy(ioc, &sas_expander->phy[i],
- expander_pg1, sas_expander->parent_dev);
+
+ if ((mpt2sas_transport_add_expander_phy(ioc,
+ &sas_expander->phy[i], expander_pg1,
+ sas_expander->parent_dev))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -1;
+ goto out_fail;
+ }
}
if (sas_expander->enclosure_handle) {
out_fail:
- if (sas_expander)
- kfree(sas_expander->phy);
+ if (mpt2sas_port)
+ mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
+ sas_expander->parent_handle);
kfree(sas_expander);
return rc;
}
sas_device->hidden_raid_component = is_pd;
/* get enclosure_logical_id */
- if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, &enclosure_pg0,
- MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
- sas_device->enclosure_handle))) {
+ if (sas_device->enclosure_handle && !(mpt2sas_config_get_enclosure_pg0(
+ ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+ sas_device->enclosure_handle)))
sas_device->enclosure_logical_id =
le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
- }
/* get device name */
sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
u16 handle = le16_to_cpu(element->VolDevHandle);
int rc;
-#if 0 /* RAID_HACKS */
- if (le32_to_cpu(event_data->Flags) &
- MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
- return;
-#endif
-
mpt2sas_config_get_volume_wwid(ioc, handle, &wwid);
if (!wwid) {
printk(MPT2SAS_ERR_FMT
unsigned long flags;
struct MPT2SAS_TARGET *sas_target_priv_data;
-#if 0 /* RAID_HACKS */
- if (le32_to_cpu(event_data->Flags) &
- MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
- return;
-#endif
-
spin_lock_irqsave(&ioc->raid_device_lock, flags);
raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
struct _sas_device *sas_device;
unsigned long flags;
u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+ Mpi2ConfigReply_t mpi_reply;
+ Mpi2SasDevicePage0_t sas_device_pg0;
+ u32 ioc_status;
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (sas_device)
+ if (sas_device) {
sas_device->hidden_raid_component = 1;
- else
- _scsih_add_device(ioc, handle, 0, 1);
+ return;
+ }
+
+ if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+ MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ _scsih_link_change(ioc,
+ le16_to_cpu(sas_device_pg0.ParentDevHandle),
+ handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+
+ _scsih_add_device(ioc, handle, 0, 1);
}
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
{
Mpi2EventIrConfigElement_t *element;
int i;
+ u8 foreign_config;
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_ir_config_change_event_debug(ioc, event_data);
#endif
+ foreign_config = (le32_to_cpu(event_data->Flags) &
+ MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
for (i = 0; i < event_data->NumElements; i++, element++) {
switch (element->ReasonCode) {
case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
case MPI2_EVENT_IR_CHANGE_RC_ADDED:
- _scsih_sas_volume_add(ioc, element);
+ if (!foreign_config)
+ _scsih_sas_volume_add(ioc, element);
break;
case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
- _scsih_sas_volume_delete(ioc, element);
+ if (!foreign_config)
+ _scsih_sas_volume_delete(ioc, element);
break;
case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
_scsih_sas_pd_hide(ioc, element);
u32 state;
struct _sas_device *sas_device;
unsigned long flags;
+ Mpi2ConfigReply_t mpi_reply;
+ Mpi2SasDevicePage0_t sas_device_pg0;
+ u32 ioc_status;
if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
return;
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
switch (state) {
-#if 0
- case MPI2_RAID_PD_STATE_OFFLINE:
- if (sas_device)
- _scsih_remove_device(ioc, handle);
- break;
-#endif
case MPI2_RAID_PD_STATE_ONLINE:
case MPI2_RAID_PD_STATE_DEGRADED:
case MPI2_RAID_PD_STATE_REBUILDING:
case MPI2_RAID_PD_STATE_OPTIMAL:
- if (sas_device)
+ if (sas_device) {
sas_device->hidden_raid_component = 1;
- else
- _scsih_add_device(ioc, handle, 0, 1);
+ return;
+ }
+
+ if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+ &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+ handle))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ _scsih_link_change(ioc,
+ le16_to_cpu(sas_device_pg0.ParentDevHandle),
+ handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+
+ _scsih_add_device(ioc, handle, 0, 1);
+
break;
+ case MPI2_RAID_PD_STATE_OFFLINE:
case MPI2_RAID_PD_STATE_NOT_CONFIGURED:
case MPI2_RAID_PD_STATE_NOT_COMPATIBLE:
case MPI2_RAID_PD_STATE_HOT_SPARE:
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
u32 device_state;
+ mpt2sas_base_stop_watchdog(ioc);
flush_scheduled_work();
scsi_block_requests(shost);
device_state = pci_choose_state(pdev, state);
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET);
scsi_unblock_requests(shost);
+ mpt2sas_base_start_watchdog(ioc);
return 0;
}
#endif /* CONFIG_PM */
config SERIAL_S3C6400
tristate "Samsung S3C6400/S3C6410 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C600 || CPU_S3C6410)
+ depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410)
default y
help
Serial port support for the Samsung S3C6400 and S3C6410
unsigned int bpw;
unsigned int hz;
unsigned int div;
+ unsigned long clk;
bpw = t ? t->bits_per_word : spi->bits_per_word;
hz = t ? t->speed_hz : spi->max_speed_hz;
+ if (!bpw)
+ bpw = 8;
+
+ if (!hz)
+ hz = spi->max_speed_hz;
+
if (bpw != 8) {
dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
return -EINVAL;
}
- div = clk_get_rate(hw->clk) / hz;
-
- /* is clk = pclk / (2 * (pre+1)), or is it
- * clk = (pclk * 2) / ( pre + 1) */
-
- div /= 2;
-
- if (div > 0)
- div -= 1;
+ clk = clk_get_rate(hw->clk);
+ div = DIV_ROUND_UP(clk, hz * 2) - 1;
if (div > 255)
div = 255;
- dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz);
+ dev_dbg(&spi->dev, "setting pre-scaler to %d (wanted %d, got %ld)\n",
+ div, hz, clk / (2 * (div + 1)));
+
+
writeb(div, hw->regs + S3C2410_SPPRE);
spin_lock(&hw->bitbang.lock);
/* tell the board code to enable the panel */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
ch = &priv->ch[k];
+ if (!ch->enabled)
+ continue;
+
board_cfg = &ch->cfg.board_cfg;
if (board_cfg->display_on)
board_cfg->display_on(board_cfg->board_data);
/* clean up deferred io and ask board code to disable panel */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
ch = &priv->ch[k];
+ if (!ch->enabled)
+ continue;
/* deferred io mode:
* flush frame, and wait for frame end interrupt
#include <linux/uaccess.h>
#include <asm/addrspace.h>
-#include <asm/ar7/ar7.h>
+#include <asm/mach-ar7/ar7.h>
#define DRVNAME "ar7_wdt"
#define LONGNAME "TI AR7 Watchdog Timer"
{
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_inode *entry;
- struct rb_node **p = &root->inode_tree.rb_node;
- struct rb_node *parent = NULL;
+ struct rb_node **p;
+ struct rb_node *parent;
+
+again:
+ p = &root->inode_tree.rb_node;
+ parent = NULL;
spin_lock(&root->inode_lock);
while (*p) {
entry = rb_entry(parent, struct btrfs_inode, rb_node);
if (inode->i_ino < entry->vfs_inode.i_ino)
- p = &(*p)->rb_left;
+ p = &parent->rb_left;
else if (inode->i_ino > entry->vfs_inode.i_ino)
- p = &(*p)->rb_right;
+ p = &parent->rb_right;
else {
WARN_ON(!(entry->vfs_inode.i_state &
(I_WILL_FREE | I_FREEING | I_CLEAR)));
- break;
+ rb_erase(parent, &root->inode_tree);
+ RB_CLEAR_NODE(parent);
+ spin_unlock(&root->inode_lock);
+ goto again;
}
}
rb_link_node(&BTRFS_I(inode)->rb_node, parent, p);
{
struct btrfs_root *root = BTRFS_I(inode)->root;
+ spin_lock(&root->inode_lock);
if (!RB_EMPTY_NODE(&BTRFS_I(inode)->rb_node)) {
- spin_lock(&root->inode_lock);
rb_erase(&BTRFS_I(inode)->rb_node, &root->inode_tree);
- spin_unlock(&root->inode_lock);
RB_CLEAR_NODE(&BTRFS_I(inode)->rb_node);
}
+ spin_unlock(&root->inode_lock);
}
static noinline void init_btrfs_i(struct inode *inode)
if (!test_set_buffer_dirty(bh)) {
struct page *page = bh->b_page;
- if (!TestSetPageDirty(page))
- __set_page_dirty(page, page_mapping(page), 0);
+ if (!TestSetPageDirty(page)) {
+ struct address_space *mapping = page_mapping(page);
+ if (mapping)
+ __set_page_dirty(page, mapping, 0);
+ }
}
}
}
EXPORT_SYMBOL(open_exec);
-int kernel_read(struct file *file, unsigned long offset,
- char *addr, unsigned long count)
+int kernel_read(struct file *file, loff_t offset,
+ char *addr, unsigned long count)
{
mm_segment_t old_fs;
loff_t pos = offset;
module will be called ext3.
config EXT3_DEFAULTS_TO_ORDERED
- bool "Default to 'data=ordered' in ext3 (legacy option)"
+ bool "Default to 'data=ordered' in ext3"
depends on EXT3_FS
help
- If a filesystem does not explicitly specify a data ordering
- mode, and the journal capability allowed it, ext3 used to
- historically default to 'data=ordered'.
-
- That was a rather unfortunate choice, because it leads to all
- kinds of latency problems, and the 'data=writeback' mode is more
- appropriate these days.
-
- You should probably always answer 'n' here, and if you really
- want to use 'data=ordered' mode, set it in the filesystem itself
- with 'tune2fs -o journal_data_ordered'.
-
- But if you really want to enable the legacy default, you can do
- so by answering 'y' to this question.
+ The journal mode options for ext3 have different tradeoffs
+ between when data is guaranteed to be on disk and
+ performance. The use of "data=writeback" can cause
+ unwritten data to appear in files after an system crash or
+ power failure, which can be a security issue. However,
+ "data=ordered" mode can also result in major performance
+ problems, including seconds-long delays before an fsync()
+ call returns. For details, see:
+
+ http://ext4.wiki.kernel.org/index.php/Ext3_data_mode_tradeoffs
+
+ If you have been historically happy with ext3's performance,
+ data=ordered mode will be a safe choice and you should
+ answer 'y' here. If you understand the reliability and data
+ privacy issues of data=writeback and are willing to make
+ that trade off, answer 'n'.
config EXT3_FS_XATTR
bool "Ext3 extended attributes"
#endif
}
+static char *data_mode_string(unsigned long mode)
+{
+ switch (mode) {
+ case EXT3_MOUNT_JOURNAL_DATA:
+ return "journal";
+ case EXT3_MOUNT_ORDERED_DATA:
+ return "ordered";
+ case EXT3_MOUNT_WRITEBACK_DATA:
+ return "writeback";
+ }
+ return "unknown";
+}
+
/*
* Show an option if
* - it's set to a non-default value OR
if (test_opt(sb, NOBH))
seq_puts(seq, ",nobh");
- if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA)
- seq_puts(seq, ",data=journal");
- else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA)
- seq_puts(seq, ",data=ordered");
- else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)
- seq_puts(seq, ",data=writeback");
-
+ seq_printf(seq, ",data=%s", data_mode_string(sbi->s_mount_opt &
+ EXT3_MOUNT_DATA_FLAGS));
if (test_opt(sb, DATA_ERR_ABORT))
seq_puts(seq, ",data_err=abort");
datacheck:
if (is_remount) {
if ((sbi->s_mount_opt & EXT3_MOUNT_DATA_FLAGS)
- != data_opt) {
- printk(KERN_ERR
- "EXT3-fs: cannot change data "
- "mode on remount\n");
- return 0;
- }
+ == data_opt)
+ break;
+ printk(KERN_ERR
+ "EXT3-fs (device %s): Cannot change "
+ "data mode on remount. The filesystem "
+ "is mounted in data=%s mode and you "
+ "try to remount it in data=%s mode.\n",
+ sb->s_id,
+ data_mode_string(sbi->s_mount_opt &
+ EXT3_MOUNT_DATA_FLAGS),
+ data_mode_string(data_opt));
+ return 0;
} else {
sbi->s_mount_opt &= ~EXT3_MOUNT_DATA_FLAGS;
sbi->s_mount_opt |= data_opt;
#define GDLM_ATTR(_name,_mode,_show,_store) \
static struct gfs2_attr gdlm_attr_##_name = __ATTR(_name,_mode,_show,_store)
-GDLM_ATTR(proto_name, 0444, proto_name_show, NULL);
-GDLM_ATTR(block, 0644, block_show, block_store);
-GDLM_ATTR(withdraw, 0644, withdraw_show, withdraw_store);
-GDLM_ATTR(id, 0444, lkid_show, NULL);
-GDLM_ATTR(jid, 0444, jid_show, NULL);
-GDLM_ATTR(first, 0444, lkfirst_show, NULL);
-GDLM_ATTR(first_done, 0444, first_done_show, NULL);
-GDLM_ATTR(recover, 0200, NULL, recover_store);
-GDLM_ATTR(recover_done, 0444, recover_done_show, NULL);
-GDLM_ATTR(recover_status, 0444, recover_status_show, NULL);
+GDLM_ATTR(proto_name, 0444, proto_name_show, NULL);
+GDLM_ATTR(block, 0644, block_show, block_store);
+GDLM_ATTR(withdraw, 0644, withdraw_show, withdraw_store);
+GDLM_ATTR(id, 0444, lkid_show, NULL);
+GDLM_ATTR(jid, 0444, jid_show, NULL);
+GDLM_ATTR(first, 0444, lkfirst_show, NULL);
+GDLM_ATTR(first_done, 0444, first_done_show, NULL);
+GDLM_ATTR(recover, 0600, NULL, recover_store);
+GDLM_ATTR(recover_done, 0444, recover_done_show, NULL);
+GDLM_ATTR(recover_status, 0444, recover_status_show, NULL);
static struct attribute *lock_module_attrs[] = {
&gdlm_attr_proto_name.attr,
return capable(CAP_IPC_LOCK) || in_group_p(sysctl_hugetlb_shm_group);
}
-struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag)
+struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag,
+ struct user_struct **user)
{
int error = -ENOMEM;
- int unlock_shm = 0;
struct file *file;
struct inode *inode;
struct dentry *dentry, *root;
struct qstr quick_string;
- struct user_struct *user = current_user();
+ *user = NULL;
if (!hugetlbfs_vfsmount)
return ERR_PTR(-ENOENT);
if (!can_do_hugetlb_shm()) {
- if (user_shm_lock(size, user)) {
- unlock_shm = 1;
+ *user = current_user();
+ if (user_shm_lock(size, *user)) {
WARN_ONCE(1,
"Using mlock ulimits for SHM_HUGETLB deprecated\n");
- } else
+ } else {
+ *user = NULL;
return ERR_PTR(-EPERM);
+ }
}
root = hugetlbfs_vfsmount->mnt_root;
out_dentry:
dput(dentry);
out_shm_unlock:
- if (unlock_shm)
- user_shm_unlock(size, user);
+ if (*user) {
+ user_shm_unlock(size, *user);
+ *user = NULL;
+ }
return ERR_PTR(error);
}
return PTR_ERR(s);
s->s_flags = MS_NOUSER;
- s->s_maxbytes = ~0ULL;
+ s->s_maxbytes = MAX_LFS_FILESIZE;
s->s_blocksize = PAGE_SIZE;
s->s_blocksize_bits = PAGE_SHIFT;
s->s_magic = magic;
continue;
}
/* Initialize or reset the session */
- if (nfs4_has_session(clp) &&
- test_and_clear_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state)) {
+ if (test_and_clear_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state)
+ && nfs4_has_session(clp)) {
if (clp->cl_cons_state == NFS_CS_SESSION_INITING)
status = nfs4_initialize_session(clp);
else
if (unlikely(err))
goto failed;
+ down_read(&nilfs->ns_segctor_sem);
err = nilfs_cpfile_get_checkpoint(nilfs->ns_cpfile, cno, 0, &raw_cp,
&bh_cp);
+ up_read(&nilfs->ns_segctor_sem);
if (unlikely(err)) {
if (err == -ENOENT || err == -EINVAL) {
printk(KERN_ERR
static inline void nilfs_put_sbinfo(struct nilfs_sb_info *sbi)
{
- if (!atomic_dec_and_test(&sbi->s_count))
+ if (atomic_dec_and_test(&sbi->s_count))
kfree(sbi);
}
event_priv->wd = wd;
ret = fsnotify_add_notify_event(group, event, fsn_event_priv);
- /* EEXIST is not an error */
- if (ret == -EEXIST)
- ret = 0;
-
- /* did event_priv get attached? */
- if (list_empty(&fsn_event_priv->event_list))
+ if (ret) {
inotify_free_event_priv(fsn_event_priv);
+ /* EEXIST says we tail matched, EOVERFLOW isn't something
+ * to report up the stack. */
+ if ((ret == -EEXIST) ||
+ (ret == -EOVERFLOW))
+ ret = 0;
+ }
/*
* If we hold the entry until after the event is on the queue
struct fsnotify_event *ignored_event;
struct inotify_event_private_data *event_priv;
struct fsnotify_event_private_data *fsn_event_priv;
+ int ret;
ignored_event = fsnotify_create_event(NULL, FS_IN_IGNORED, NULL,
FSNOTIFY_EVENT_NONE, NULL, 0,
fsn_event_priv->group = group;
event_priv->wd = ientry->wd;
- fsnotify_add_notify_event(group, ignored_event, fsn_event_priv);
-
- /* did the private data get added? */
- if (list_empty(&fsn_event_priv->event_list))
+ ret = fsnotify_add_notify_event(group, ignored_event, fsn_event_priv);
+ if (ret)
inotify_free_event_priv(fsn_event_priv);
skip_send_ignore:
spin_lock_init(&group->inotify_data.idr_lock);
idr_init(&group->inotify_data.idr);
- group->inotify_data.last_wd = 0;
+ group->inotify_data.last_wd = 1;
group->inotify_data.user = user;
group->inotify_data.fa = NULL;
return true;
break;
case (FSNOTIFY_EVENT_NONE):
+ if (old->mask & FS_Q_OVERFLOW)
+ return true;
+ else if (old->mask & FS_IN_IGNORED)
+ return false;
return false;
};
}
struct list_head *list = &group->notification_list;
struct fsnotify_event_holder *last_holder;
struct fsnotify_event *last_event;
-
- /* easy to tell if priv was attached to the event */
- INIT_LIST_HEAD(&priv->event_list);
+ int ret = 0;
/*
* There is one fsnotify_event_holder embedded inside each fsnotify_event.
if (group->q_len >= group->max_events) {
event = &q_overflow_event;
+ ret = -EOVERFLOW;
/* sorry, no private data on the overflow event */
priv = NULL;
}
mutex_unlock(&group->notification_mutex);
wake_up(&group->notification_waitq);
- return 0;
+ return ret;
}
/*
}
status = 0;
bail:
-
+ brelse(last_eb_bh);
mlog_exit(status);
return status;
}
* that still has AST's pending... */
in_use = !list_empty(&lock->ast_list);
spin_unlock(&dlm->ast_lock);
- if (in_use) {
+ if (in_use && !(flags & LKM_CANCEL)) {
mlog(ML_ERROR, "lockres %.*s: Someone is calling dlmunlock "
"while waiting for an ast!", res->lockname.len,
res->lockname.name);
spin_lock(&res->spinlock);
if (res->state & DLM_LOCK_RES_IN_PROGRESS) {
- if (master_node) {
+ if (master_node && !(flags & LKM_CANCEL)) {
mlog(ML_ERROR, "lockres in progress!\n");
spin_unlock(&res->spinlock);
return DLM_FORWARD;
[OCFS2_LOCK_TYPE_OPEN] = "Open",
[OCFS2_LOCK_TYPE_FLOCK] = "Flock",
[OCFS2_LOCK_TYPE_QINFO] = "Quota",
+ [OCFS2_LOCK_TYPE_NFS_SYNC] = "NFSSync",
[OCFS2_LOCK_TYPE_ORPHAN_SCAN] = "OrphanScan",
};
#include "sysfile.h"
#include "dlmglue.h"
#include "uptodate.h"
+#include "super.h"
#include "quota.h"
static struct workqueue_struct *ocfs2_quota_wq = NULL;
int rc = 0;
struct buffer_head *tmp = *bh;
+ if (i_size_read(inode) >> inode->i_sb->s_blocksize_bits <= v_block) {
+ ocfs2_error(inode->i_sb,
+ "Quota file %llu is probably corrupted! Requested "
+ "to read block %Lu but file has size only %Lu\n",
+ (unsigned long long)OCFS2_I(inode)->ip_blkno,
+ (unsigned long long)v_block,
+ (unsigned long long)i_size_read(inode));
+ return -EIO;
+ }
rc = ocfs2_read_virt_blocks(inode, v_block, 1, &tmp, 0,
ocfs2_validate_quota_block);
if (rc)
{
struct ocfs2_super *osb = OCFS2_SB(sb);
+ /* Failed mount? */
+ if (!osb || atomic_read(&osb->vol_state) == VOLUME_DISABLED)
+ goto out;
+
/* Prevent further queueing of inode drop events */
spin_lock(&dentry_list_lock);
ocfs2_set_osb_flag(osb, OCFS2_OSB_DROP_DENTRY_LOCK_IMMED);
spin_unlock(&dentry_list_lock);
/* Wait for work to finish and/or remove it */
cancel_work_sync(&osb->dentry_lock_work);
-
+out:
kill_block_super(sb);
}
if (!task)
return -ESRCH;
- task_lock(task);
- if (task->mm)
- oom_adjust = task->mm->oom_adj;
- else
- oom_adjust = OOM_DISABLE;
- task_unlock(task);
+ oom_adjust = task->oomkilladj;
put_task_struct(task);
len = snprintf(buffer, sizeof(buffer), "%i\n", oom_adjust);
task = get_proc_task(file->f_path.dentry->d_inode);
if (!task)
return -ESRCH;
- task_lock(task);
- if (!task->mm) {
- task_unlock(task);
- put_task_struct(task);
- return -EINVAL;
- }
- if (oom_adjust < task->mm->oom_adj && !capable(CAP_SYS_RESOURCE)) {
- task_unlock(task);
+ if (oom_adjust < task->oomkilladj && !capable(CAP_SYS_RESOURCE)) {
put_task_struct(task);
return -EACCES;
}
- task->mm->oom_adj = oom_adjust;
- task_unlock(task);
+ task->oomkilladj = oom_adjust;
put_task_struct(task);
if (end - buffer == 0)
return -EIO;
{
init_poll_funcptr(&pwq->pt, __pollwait);
pwq->polling_task = current;
+ pwq->triggered = 0;
pwq->error = 0;
pwq->table = NULL;
pwq->inline_index = 0;
return 0;
}
+void
+__xfs_inode_set_reclaim_tag(
+ struct xfs_perag *pag,
+ struct xfs_inode *ip)
+{
+ radix_tree_tag_set(&pag->pag_ici_root,
+ XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino),
+ XFS_ICI_RECLAIM_TAG);
+}
+
/*
* We set the inode flag atomically with the radix tree tag.
* Once we get tag lookups on the radix tree, this inode flag
read_lock(&pag->pag_ici_lock);
spin_lock(&ip->i_flags_lock);
- radix_tree_tag_set(&pag->pag_ici_root,
- XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
+ __xfs_inode_set_reclaim_tag(pag, ip);
__xfs_iflags_set(ip, XFS_IRECLAIMABLE);
spin_unlock(&ip->i_flags_lock);
read_unlock(&pag->pag_ici_lock);
int xfs_reclaim_inodes(struct xfs_mount *mp, int mode);
void xfs_inode_set_reclaim_tag(struct xfs_inode *ip);
+void __xfs_inode_set_reclaim_tag(struct xfs_perag *pag, struct xfs_inode *ip);
void xfs_inode_clear_reclaim_tag(struct xfs_inode *ip);
void __xfs_inode_clear_reclaim_tag(struct xfs_mount *mp, struct xfs_perag *pag,
struct xfs_inode *ip);
int flags,
int lock_flags) __releases(pag->pag_ici_lock)
{
+ struct inode *inode = VFS_I(ip);
struct xfs_mount *mp = ip->i_mount;
- int error = EAGAIN;
+ int error;
+
+ spin_lock(&ip->i_flags_lock);
/*
- * If INEW is set this inode is being set up
- * If IRECLAIM is set this inode is being torn down
- * Pause and try again.
+ * If we are racing with another cache hit that is currently
+ * instantiating this inode or currently recycling it out of
+ * reclaimabe state, wait for the initialisation to complete
+ * before continuing.
+ *
+ * XXX(hch): eventually we should do something equivalent to
+ * wait_on_inode to wait for these flags to be cleared
+ * instead of polling for it.
*/
- if (xfs_iflags_test(ip, (XFS_INEW|XFS_IRECLAIM))) {
+ if (ip->i_flags & (XFS_INEW|XFS_IRECLAIM)) {
XFS_STATS_INC(xs_ig_frecycle);
+ error = EAGAIN;
goto out_error;
}
- /* If IRECLAIMABLE is set, we've torn down the vfs inode part */
- if (xfs_iflags_test(ip, XFS_IRECLAIMABLE)) {
-
- /*
- * If lookup is racing with unlink, then we should return an
- * error immediately so we don't remove it from the reclaim
- * list and potentially leak the inode.
- */
- if ((ip->i_d.di_mode == 0) && !(flags & XFS_IGET_CREATE)) {
- error = ENOENT;
- goto out_error;
- }
+ /*
+ * If lookup is racing with unlink return an error immediately.
+ */
+ if (ip->i_d.di_mode == 0 && !(flags & XFS_IGET_CREATE)) {
+ error = ENOENT;
+ goto out_error;
+ }
+ /*
+ * If IRECLAIMABLE is set, we've torn down the VFS inode already.
+ * Need to carefully get it back into useable state.
+ */
+ if (ip->i_flags & XFS_IRECLAIMABLE) {
xfs_itrace_exit_tag(ip, "xfs_iget.alloc");
/*
- * We need to re-initialise the VFS inode as it has been
- * 'freed' by the VFS. Do this here so we can deal with
- * errors cleanly, then tag it so it can be set up correctly
- * later.
+ * We need to set XFS_INEW atomically with clearing the
+ * reclaimable tag so that we do have an indicator of the
+ * inode still being initialized.
*/
- if (inode_init_always(mp->m_super, VFS_I(ip))) {
- error = ENOMEM;
- goto out_error;
- }
+ ip->i_flags |= XFS_INEW;
+ ip->i_flags &= ~XFS_IRECLAIMABLE;
+ __xfs_inode_clear_reclaim_tag(mp, pag, ip);
- /*
- * We must set the XFS_INEW flag before clearing the
- * XFS_IRECLAIMABLE flag so that if a racing lookup does
- * not find the XFS_IRECLAIMABLE above but has the igrab()
- * below succeed we can safely check XFS_INEW to detect
- * that this inode is still being initialised.
- */
- xfs_iflags_set(ip, XFS_INEW);
- xfs_iflags_clear(ip, XFS_IRECLAIMABLE);
+ spin_unlock(&ip->i_flags_lock);
+ read_unlock(&pag->pag_ici_lock);
- /* clear the radix tree reclaim flag as well. */
- __xfs_inode_clear_reclaim_tag(mp, pag, ip);
- } else if (!igrab(VFS_I(ip))) {
+ error = -inode_init_always(mp->m_super, inode);
+ if (error) {
+ /*
+ * Re-initializing the inode failed, and we are in deep
+ * trouble. Try to re-add it to the reclaim list.
+ */
+ read_lock(&pag->pag_ici_lock);
+ spin_lock(&ip->i_flags_lock);
+
+ ip->i_flags &= ~XFS_INEW;
+ ip->i_flags |= XFS_IRECLAIMABLE;
+ __xfs_inode_set_reclaim_tag(pag, ip);
+ goto out_error;
+ }
+ inode->i_state = I_LOCK|I_NEW;
+ } else {
/* If the VFS inode is being torn down, pause and try again. */
- XFS_STATS_INC(xs_ig_frecycle);
- goto out_error;
- } else if (xfs_iflags_test(ip, XFS_INEW)) {
- /*
- * We are racing with another cache hit that is
- * currently recycling this inode out of the XFS_IRECLAIMABLE
- * state. Wait for the initialisation to complete before
- * continuing.
- */
- wait_on_inode(VFS_I(ip));
- }
+ if (!igrab(inode)) {
+ error = EAGAIN;
+ goto out_error;
+ }
- if (ip->i_d.di_mode == 0 && !(flags & XFS_IGET_CREATE)) {
- error = ENOENT;
- iput(VFS_I(ip));
- goto out_error;
+ /* We've got a live one. */
+ spin_unlock(&ip->i_flags_lock);
+ read_unlock(&pag->pag_ici_lock);
}
- /* We've got a live one. */
- read_unlock(&pag->pag_ici_lock);
-
if (lock_flags != 0)
xfs_ilock(ip, lock_flags);
return 0;
out_error:
+ spin_unlock(&ip->i_flags_lock);
read_unlock(&pag->pag_ici_lock);
return error;
}
#define DRM_RADEON_INFO 0x27
#define DRM_RADEON_GEM_SET_TILING 0x28
#define DRM_RADEON_GEM_GET_TILING 0x29
+#define DRM_RADEON_GEM_BUSY 0x2a
#define DRM_IOCTL_RADEON_CP_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CP_INIT, drm_radeon_init_t)
#define DRM_IOCTL_RADEON_CP_START DRM_IO( DRM_COMMAND_BASE + DRM_RADEON_CP_START)
#define DRM_IOCTL_RADEON_INFO DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_INFO, struct drm_radeon_info)
#define DRM_IOCTL_RADEON_SET_TILING DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_SET_TILING, struct drm_radeon_gem_set_tiling)
#define DRM_IOCTL_RADEON_GET_TILING DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_GET_TILING, struct drm_radeon_gem_get_tiling)
+#define DRM_IOCTL_RADEON_GEM_BUSY DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_BUSY, struct drm_radeon_gem_busy)
typedef struct drm_radeon_init {
enum {
#define RADEON_PARAM_FB_LOCATION 14 /* FB location */
#define RADEON_PARAM_NUM_GB_PIPES 15 /* num GB pipes */
#define RADEON_PARAM_DEVICE_ID 16
+#define RADEON_PARAM_NUM_Z_PIPES 17 /* num Z pipes */
typedef struct drm_radeon_getparam {
int param;
struct drm_radeon_gem_busy {
uint32_t handle;
- uint32_t busy;
+ uint32_t domain;
};
struct drm_radeon_gem_pread {
#define RADEON_INFO_DEVICE_ID 0x00
#define RADEON_INFO_NUM_GB_PIPES 0x01
+#define RADEON_INFO_NUM_Z_PIPES 0x02
struct drm_radeon_info {
uint32_t request;
const unsigned long *src, int shift, int bits);
extern void __bitmap_shift_left(unsigned long *dst,
const unsigned long *src, int shift, int bits);
-extern void __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
+extern int __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
const unsigned long *bitmap2, int bits);
extern void __bitmap_or(unsigned long *dst, const unsigned long *bitmap1,
const unsigned long *bitmap2, int bits);
extern void __bitmap_xor(unsigned long *dst, const unsigned long *bitmap1,
const unsigned long *bitmap2, int bits);
-extern void __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
+extern int __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
const unsigned long *bitmap2, int bits);
extern int __bitmap_intersects(const unsigned long *bitmap1,
const unsigned long *bitmap2, int bits);
}
}
-static inline void bitmap_and(unsigned long *dst, const unsigned long *src1,
+static inline int bitmap_and(unsigned long *dst, const unsigned long *src1,
const unsigned long *src2, int nbits)
{
if (small_const_nbits(nbits))
- *dst = *src1 & *src2;
- else
- __bitmap_and(dst, src1, src2, nbits);
+ return (*dst = *src1 & *src2) != 0;
+ return __bitmap_and(dst, src1, src2, nbits);
}
static inline void bitmap_or(unsigned long *dst, const unsigned long *src1,
__bitmap_xor(dst, src1, src2, nbits);
}
-static inline void bitmap_andnot(unsigned long *dst, const unsigned long *src1,
+static inline int bitmap_andnot(unsigned long *dst, const unsigned long *src1,
const unsigned long *src2, int nbits)
{
if (small_const_nbits(nbits))
- *dst = *src1 & ~(*src2);
- else
- __bitmap_andnot(dst, src1, src2, nbits);
+ return (*dst = *src1 & ~(*src2)) != 0;
+ return __bitmap_andnot(dst, src1, src2, nbits);
}
static inline void bitmap_complement(unsigned long *dst, const unsigned long *src,
* int cpu_isset(cpu, mask) true iff bit 'cpu' set in mask
* int cpu_test_and_set(cpu, mask) test and set bit 'cpu' in mask
*
- * void cpus_and(dst, src1, src2) dst = src1 & src2 [intersection]
+ * int cpus_and(dst, src1, src2) dst = src1 & src2 [intersection]
* void cpus_or(dst, src1, src2) dst = src1 | src2 [union]
* void cpus_xor(dst, src1, src2) dst = src1 ^ src2
- * void cpus_andnot(dst, src1, src2) dst = src1 & ~src2
+ * int cpus_andnot(dst, src1, src2) dst = src1 & ~src2
* void cpus_complement(dst, src) dst = ~src
*
* int cpus_equal(mask1, mask2) Does mask1 == mask2?
}
#define cpus_and(dst, src1, src2) __cpus_and(&(dst), &(src1), &(src2), NR_CPUS)
-static inline void __cpus_and(cpumask_t *dstp, const cpumask_t *src1p,
+static inline int __cpus_and(cpumask_t *dstp, const cpumask_t *src1p,
const cpumask_t *src2p, int nbits)
{
- bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits);
+ return bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits);
}
#define cpus_or(dst, src1, src2) __cpus_or(&(dst), &(src1), &(src2), NR_CPUS)
#define cpus_andnot(dst, src1, src2) \
__cpus_andnot(&(dst), &(src1), &(src2), NR_CPUS)
-static inline void __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p,
+static inline int __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p,
const cpumask_t *src2p, int nbits)
{
- bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits);
+ return bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits);
}
#define cpus_complement(dst, src) __cpus_complement(&(dst), &(src), NR_CPUS)
* @src1p: the first input
* @src2p: the second input
*/
-static inline void cpumask_and(struct cpumask *dstp,
+static inline int cpumask_and(struct cpumask *dstp,
const struct cpumask *src1p,
const struct cpumask *src2p)
{
- bitmap_and(cpumask_bits(dstp), cpumask_bits(src1p),
+ return bitmap_and(cpumask_bits(dstp), cpumask_bits(src1p),
cpumask_bits(src2p), nr_cpumask_bits);
}
* @src1p: the first input
* @src2p: the second input
*/
-static inline void cpumask_andnot(struct cpumask *dstp,
+static inline int cpumask_andnot(struct cpumask *dstp,
const struct cpumask *src1p,
const struct cpumask *src2p)
{
- bitmap_andnot(cpumask_bits(dstp), cpumask_bits(src1p),
+ return bitmap_andnot(cpumask_bits(dstp), cpumask_bits(src1p),
cpumask_bits(src2p), nr_cpumask_bits);
}
int open_flag, int mode, int acc_mode);
extern int may_open(struct path *, int, int);
-extern int kernel_read(struct file *, unsigned long, char *, unsigned long);
+extern int kernel_read(struct file *, loff_t, char *, unsigned long);
extern struct file * open_exec(const char *);
/* fs/dcache.c -- generic fs support functions */
* @packets: number of seen packets
*/
struct gnet_stats_basic
+{
+ __u64 bytes;
+ __u32 packets;
+};
+struct gnet_stats_basic_packed
{
__u64 bytes;
__u32 packets;
#include <asm/tlbflush.h>
struct ctl_table;
+struct user_struct;
int PageHuge(struct page *page);
extern const struct file_operations hugetlbfs_file_operations;
extern struct vm_operations_struct hugetlb_vm_ops;
-struct file *hugetlb_file_setup(const char *name, size_t, int);
+struct file *hugetlb_file_setup(const char *name, size_t size, int acct,
+ struct user_struct **user);
int hugetlb_get_quota(struct address_space *mapping, long delta);
void hugetlb_put_quota(struct address_space *mapping, long delta);
#define is_file_hugepages(file) 0
#define set_file_hugepages(file) BUG()
-#define hugetlb_file_setup(name,size,acctflag) ERR_PTR(-ENOSYS)
+#define hugetlb_file_setup(name,size,acct,user) ERR_PTR(-ENOSYS)
#endif /* !CONFIG_HUGETLBFS */
#define sysctl_legacy_va_layout 0
#endif
-extern unsigned long mmap_min_addr;
-
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
set_page_section(page, pfn_to_section_nr(pfn));
}
-/*
- * If a hint addr is less than mmap_min_addr change hint to be as
- * low as possible but still greater than mmap_min_addr
- */
-static inline unsigned long round_hint_to_min(unsigned long hint)
-{
- hint &= PAGE_MASK;
- if (((void *)hint != NULL) &&
- (hint < mmap_min_addr))
- return PAGE_ALIGN(mmap_min_addr);
- return hint;
-}
-
/*
* Some inline functions in vmstat.h depend on page_zone()
*/
unsigned long saved_auxv[AT_VECTOR_SIZE]; /* for /proc/PID/auxv */
- s8 oom_adj; /* OOM kill score adjustment (bit shift) */
-
cpumask_t cpu_vm_mask;
/* Architecture-specific MM context */
* a short time
*/
unsigned char fpu_counter;
+ s8 oomkilladj; /* OOM kill score adjustment (bit shift). */
#ifdef CONFIG_BLK_DEV_IO_TRACE
unsigned int btrace_seq;
#endif
#include <linux/resource.h>
#include <linux/sem.h>
#include <linux/shm.h>
+#include <linux/mm.h> /* PAGE_ALIGN */
#include <linux/msg.h>
#include <linux/sched.h>
#include <linux/key.h>
extern int cap_inode_removexattr(struct dentry *dentry, const char *name);
extern int cap_inode_need_killpriv(struct dentry *dentry);
extern int cap_inode_killpriv(struct dentry *dentry);
+extern int cap_file_mmap(struct file *file, unsigned long reqprot,
+ unsigned long prot, unsigned long flags,
+ unsigned long addr, unsigned long addr_only);
extern int cap_task_fix_setuid(struct cred *new, const struct cred *old, int flags);
extern int cap_task_prctl(int option, unsigned long arg2, unsigned long arg3,
unsigned long arg4, unsigned long arg5);
extern int cap_netlink_recv(struct sk_buff *skb, int cap);
extern unsigned long mmap_min_addr;
+extern unsigned long dac_mmap_min_addr;
/*
* Values used in the task_security_ops calls
*/
#define LSM_UNSAFE_PTRACE 2
#define LSM_UNSAFE_PTRACE_CAP 4
+/*
+ * If a hint addr is less than mmap_min_addr change hint to be as
+ * low as possible but still greater than mmap_min_addr
+ */
+static inline unsigned long round_hint_to_min(unsigned long hint)
+{
+ hint &= PAGE_MASK;
+ if (((void *)hint != NULL) &&
+ (hint < mmap_min_addr))
+ return PAGE_ALIGN(mmap_min_addr);
+ return hint;
+}
+extern int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp,
+ void __user *buffer, size_t *lenp, loff_t *ppos);
+
#ifdef CONFIG_SECURITY
struct security_mnt_opts {
unsigned long addr,
unsigned long addr_only)
{
- if ((addr < mmap_min_addr) && !capable(CAP_SYS_RAWIO))
- return -EACCES;
- return 0;
+ return cap_file_mmap(file, reqprot, prot, flags, addr, addr_only);
}
static inline int security_file_mprotect(struct vm_area_struct *vma,
#define UCB_ADC_DATA 0x68
#define UCB_ADC_DAT_VALID (1 << 15)
+
+#define UCB_FCSR 0x6c
+#define UCB_FCSR_AVE (1 << 12)
+
#define UCB_ADC_DAT_MASK 0x3ff
#define UCB_ID 0x7e
u32 tcfc_capab;
int tcfc_action;
struct tcf_t tcfc_tm;
- struct gnet_stats_basic tcfc_bstats;
+ struct gnet_stats_basic_packed tcfc_bstats;
struct gnet_stats_queue tcfc_qstats;
struct gnet_stats_rate_est tcfc_rate_est;
spinlock_t tcfc_lock;
spinlock_t *lock, struct gnet_dump *d);
extern int gnet_stats_copy_basic(struct gnet_dump *d,
- struct gnet_stats_basic *b);
+ struct gnet_stats_basic_packed *b);
extern int gnet_stats_copy_rate_est(struct gnet_dump *d,
struct gnet_stats_rate_est *r);
extern int gnet_stats_copy_queue(struct gnet_dump *d,
extern int gnet_stats_finish_copy(struct gnet_dump *d);
-extern int gen_new_estimator(struct gnet_stats_basic *bstats,
+extern int gen_new_estimator(struct gnet_stats_basic_packed *bstats,
struct gnet_stats_rate_est *rate_est,
spinlock_t *stats_lock, struct nlattr *opt);
-extern void gen_kill_estimator(struct gnet_stats_basic *bstats,
+extern void gen_kill_estimator(struct gnet_stats_basic_packed *bstats,
struct gnet_stats_rate_est *rate_est);
-extern int gen_replace_estimator(struct gnet_stats_basic *bstats,
+extern int gen_replace_estimator(struct gnet_stats_basic_packed *bstats,
struct gnet_stats_rate_est *rate_est,
spinlock_t *stats_lock, struct nlattr *opt);
-extern bool gen_estimator_active(const struct gnet_stats_basic *bstats,
+extern bool gen_estimator_active(const struct gnet_stats_basic_packed *bstats,
const struct gnet_stats_rate_est *rate_est);
#endif
spinlock_t lock;
struct gnet_estimator params;
struct gnet_stats_rate_est rstats;
- struct gnet_stats_basic bstats;
+ struct gnet_stats_basic_packed bstats;
};
extern struct xt_rateest *xt_rateest_lookup(const char *name);
}
struct qdisc_watchdog {
- struct hrtimer timer;
- struct Qdisc *qdisc;
+ struct tasklet_hrtimer timer;
+ struct Qdisc *qdisc;
};
extern void qdisc_watchdog_init(struct qdisc_watchdog *wd, struct Qdisc *qdisc);
*/
unsigned long state;
struct sk_buff_head q;
- struct gnet_stats_basic bstats;
+ struct gnet_stats_basic_packed bstats;
struct gnet_stats_queue qstats;
};
setup_arch(&command_line);
mm_init_owner(&init_mm, &init_task);
setup_command_line(command_line);
- setup_per_cpu_areas();
setup_nr_cpu_ids();
+ setup_per_cpu_areas();
smp_prepare_boot_cpu(); /* arch-specific boot-cpu hooks */
build_all_zonelists();
int initcall_debug;
core_param(initcall_debug, initcall_debug, bool, 0644);
+static char msgbuf[64];
+static struct boot_trace_call call;
+static struct boot_trace_ret ret;
+
int do_one_initcall(initcall_t fn)
{
int count = preempt_count();
ktime_t calltime, delta, rettime;
- char msgbuf[64];
- struct boot_trace_call call;
- struct boot_trace_ret ret;
if (initcall_debug) {
call.caller = task_pid_nr(current);
shm_unlock(shp);
if (!is_file_hugepages(shp->shm_file))
shmem_lock(shp->shm_file, 0, shp->mlock_user);
- else
+ else if (shp->mlock_user)
user_shm_unlock(shp->shm_file->f_path.dentry->d_inode->i_size,
shp->mlock_user);
fput (shp->shm_file);
/* hugetlb_file_setup applies strict accounting */
if (shmflg & SHM_NORESERVE)
acctflag = VM_NORESERVE;
- file = hugetlb_file_setup(name, size, acctflag);
- shp->mlock_user = current_user();
+ file = hugetlb_file_setup(name, size, acctflag,
+ &shp->mlock_user);
} else {
/*
* Do not allow no accounting for OVERCOMMIT_NEVER, even
return error;
no_id:
+ if (shp->mlock_user) /* shmflg & SHM_HUGETLB case */
+ user_shm_unlock(size, shp->mlock_user);
fput(file);
no_file:
security_shm_free(shp);
init_rwsem(&mm->mmap_sem);
INIT_LIST_HEAD(&mm->mmlist);
mm->flags = (current->mm) ? current->mm->flags : default_dump_filter;
- mm->oom_adj = (current->mm) ? current->mm->oom_adj : 0;
mm->core_state = NULL;
mm->nr_ptes = 0;
set_mm_counter(mm, file_rss, 0);
*/
get_task_struct(t);
new->thread = t;
- wake_up_process(t);
}
/*
(int)(new->flags & IRQF_TRIGGER_MASK));
}
+ new->irq = irq;
*old_ptr = new;
/* Reset broken irq detection when installing new handler */
spin_unlock_irqrestore(&desc->lock, flags);
- new->irq = irq;
+ /*
+ * Strictly no need to wake it up, but hung_task complains
+ * when no hard interrupt wakes the thread up.
+ */
+ if (new->thread)
+ wake_up_process(new->thread);
+
register_irq_proc(irq, desc);
new->dir = NULL;
register_handler_proc(irq, new);
#include <linux/acpi.h>
#include <linux/reboot.h>
#include <linux/ftrace.h>
+#include <linux/security.h>
#include <linux/slow-work.h>
#include <linux/perf_counter.h>
{
.ctl_name = CTL_UNNUMBERED,
.procname = "mmap_min_addr",
- .data = &mmap_min_addr,
- .maxlen = sizeof(unsigned long),
+ .data = &dac_mmap_min_addr,
+ .maxlen = sizeof(unsigned long),
.mode = 0644,
- .proc_handler = &proc_doulongvec_minmax,
+ .proc_handler = &mmap_min_addr_handler,
},
#ifdef CONFIG_NUMA
{
*/
int clockevents_register_notifier(struct notifier_block *nb)
{
+ unsigned long flags;
int ret;
- spin_lock(&clockevents_lock);
+ spin_lock_irqsave(&clockevents_lock, flags);
ret = raw_notifier_chain_register(&clockevents_chain, nb);
- spin_unlock(&clockevents_lock);
+ spin_unlock_irqrestore(&clockevents_lock, flags);
return ret;
}
*/
void clockevents_register_device(struct clock_event_device *dev)
{
+ unsigned long flags;
+
BUG_ON(dev->mode != CLOCK_EVT_MODE_UNUSED);
BUG_ON(!dev->cpumask);
- spin_lock(&clockevents_lock);
+ spin_lock_irqsave(&clockevents_lock, flags);
list_add(&dev->list, &clockevent_devices);
clockevents_do_notify(CLOCK_EVT_NOTIFY_ADD, dev);
clockevents_notify_released();
- spin_unlock(&clockevents_lock);
+ spin_unlock_irqrestore(&clockevents_lock, flags);
}
EXPORT_SYMBOL_GPL(clockevents_register_device);
void clockevents_notify(unsigned long reason, void *arg)
{
struct list_head *node, *tmp;
+ unsigned long flags;
- spin_lock(&clockevents_lock);
+ spin_lock_irqsave(&clockevents_lock, flags);
clockevents_do_notify(reason, arg);
switch (reason) {
default:
break;
}
- spin_unlock(&clockevents_lock);
+ spin_unlock_irqrestore(&clockevents_lock, flags);
}
EXPORT_SYMBOL_GPL(clockevents_notify);
#endif
* Powerstate information: The system enters/leaves a state, where
* affected devices might stop
*/
-static void tick_do_broadcast_on_off(void *why)
+static void tick_do_broadcast_on_off(unsigned long *reason)
{
struct clock_event_device *bc, *dev;
struct tick_device *td;
- unsigned long flags, *reason = why;
+ unsigned long flags;
int cpu, bc_stopped;
spin_lock_irqsave(&tick_broadcast_lock, flags);
printk(KERN_ERR "tick-broadcast: ignoring broadcast for "
"offline CPU #%d\n", *oncpu);
else
- smp_call_function_single(*oncpu, tick_do_broadcast_on_off,
- &reason, 1);
+ tick_do_broadcast_on_off(&reason);
}
/*
{
struct proc_dir_entry *pe;
- pe = proc_create("timer_list", 0644, NULL, &timer_list_fops);
+ pe = proc_create("timer_list", 0444, NULL, &timer_list_fops);
if (!pe)
return -ENOMEM;
return 0;
read++;
cnt--;
- if (!(iter->flags & ~FTRACE_ITER_CONT)) {
+ /*
+ * If the parser haven't finished with the last write,
+ * continue reading the user input without skipping spaces.
+ */
+ if (!(iter->flags & FTRACE_ITER_CONT)) {
/* skip white space */
while (cnt && isspace(ch)) {
ret = get_user(ch, ubuf++);
cnt--;
}
+ /* only spaces were written */
if (isspace(ch)) {
- file->f_pos += read;
+ *ppos += read;
ret = read;
goto out;
}
if (ret)
goto out;
iter->buffer_idx = 0;
- } else
+ } else {
iter->flags |= FTRACE_ITER_CONT;
+ iter->buffer[iter->buffer_idx++] = ch;
+ }
-
- file->f_pos += read;
-
+ *ppos += read;
ret = read;
out:
mutex_unlock(&ftrace_regex_lock);
if (ret < 0)
return ret;
- switch (val) {
- case 0:
- trace_flags &= ~(1 << index);
- break;
- case 1:
- trace_flags |= 1 << index;
- break;
-
- default:
+ if (val != 0 && val != 1)
return -EINVAL;
- }
+ set_tracer_flags(1 << index, val);
*ppos += cnt;
}
EXPORT_SYMBOL(__bitmap_shift_left);
-void __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
+int __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
const unsigned long *bitmap2, int bits)
{
int k;
int nr = BITS_TO_LONGS(bits);
+ unsigned long result = 0;
for (k = 0; k < nr; k++)
- dst[k] = bitmap1[k] & bitmap2[k];
+ result |= (dst[k] = bitmap1[k] & bitmap2[k]);
+ return result != 0;
}
EXPORT_SYMBOL(__bitmap_and);
}
EXPORT_SYMBOL(__bitmap_xor);
-void __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
+int __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
const unsigned long *bitmap2, int bits)
{
int k;
int nr = BITS_TO_LONGS(bits);
+ unsigned long result = 0;
for (k = 0; k < nr; k++)
- dst[k] = bitmap1[k] & ~bitmap2[k];
+ result |= (dst[k] = bitmap1[k] & ~bitmap2[k]);
+ return result != 0;
}
EXPORT_SYMBOL(__bitmap_andnot);
return true;
/* driver filter on and initialized */
- if (current_driver && dev->driver == current_driver)
+ if (current_driver && dev && dev->driver == current_driver)
return true;
+ /* driver filter on, but we can't filter on a NULL device... */
+ if (!dev)
+ return false;
+
if (current_driver || !current_driver_name[0])
return false;
return ret;
}
-#define err_printk(dev, entry, format, arg...) do { \
- error_count += 1; \
- if (driver_filter(dev) && \
- (show_all_errors || show_num_errors > 0)) { \
- WARN(1, "%s %s: " format, \
- dev_driver_string(dev), \
- dev_name(dev) , ## arg); \
- dump_entry_trace(entry); \
- } \
- if (!show_all_errors && show_num_errors > 0) \
- show_num_errors -= 1; \
+#define err_printk(dev, entry, format, arg...) do { \
+ error_count += 1; \
+ if (driver_filter(dev) && \
+ (show_all_errors || show_num_errors > 0)) { \
+ WARN(1, "%s %s: " format, \
+ dev ? dev_driver_string(dev) : "NULL", \
+ dev ? dev_name(dev) : "NULL", ## arg); \
+ dump_entry_trace(entry); \
+ } \
+ if (!show_all_errors && show_num_errors > 0) \
+ show_num_errors -= 1; \
} while (0);
/*
For most ia64, ppc64 and x86 users with lots of address space
a value of 65536 is reasonable and should cause no problems.
On arm and other archs it should not be higher than 32768.
- Programs which use vm86 functionality would either need additional
- permissions from either the LSM or the capabilities module or have
- this protection disabled.
+ Programs which use vm86 functionality or have some need to map
+ this low address space will need CAP_SYS_RAWIO or disable this
+ protection by setting the value to 0.
This value can be changed after boot using the
/proc/sys/vm/mmap_min_addr tunable.
int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
struct percpu_counter vm_committed_as;
-/* amount of vm to protect from userspace access */
-unsigned long mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR;
-
/*
* Check that a process has enough memory to allocate a new virtual
* mapping. 0 means there is enough memory for the allocation to
int sysctl_nr_trim_pages = CONFIG_NOMMU_INITIAL_TRIM_EXCESS;
int heap_stack_gap = 0;
-/* amount of vm to protect from userspace access */
-unsigned long mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR;
-
atomic_long_t mmap_pages_allocated;
EXPORT_SYMBOL(mem_map);
if (!file->f_op->read)
capabilities &= ~BDI_CAP_MAP_COPY;
+ /* The file shall have been opened with read permission. */
+ if (!(file->f_mode & FMODE_READ))
+ return -EACCES;
+
if (flags & MAP_SHARED) {
/* do checks for writing, appending and locking */
if ((prot & PROT_WRITE) &&
unsigned long points, cpu_time, run_time;
struct mm_struct *mm;
struct task_struct *child;
- int oom_adj;
task_lock(p);
mm = p->mm;
task_unlock(p);
return 0;
}
- oom_adj = mm->oom_adj;
- if (oom_adj == OOM_DISABLE) {
- task_unlock(p);
- return 0;
- }
/*
* The memory size of the process is the basis for the badness.
points /= 8;
/*
- * Adjust the score by oom_adj.
+ * Adjust the score by oomkilladj.
*/
- if (oom_adj) {
- if (oom_adj > 0) {
+ if (p->oomkilladj) {
+ if (p->oomkilladj > 0) {
if (!points)
points = 1;
- points <<= oom_adj;
+ points <<= p->oomkilladj;
} else
- points >>= -(oom_adj);
+ points >>= -(p->oomkilladj);
}
#ifdef DEBUG
*ppoints = ULONG_MAX;
}
+ if (p->oomkilladj == OOM_DISABLE)
+ continue;
+
points = badness(p, uptime.tv_sec);
- if (points > *ppoints) {
+ if (points > *ppoints || !chosen) {
chosen = p;
*ppoints = points;
}
}
printk(KERN_INFO "[%5d] %5d %5d %8lu %8lu %3d %3d %s\n",
p->pid, __task_cred(p)->uid, p->tgid, mm->total_vm,
- get_mm_rss(mm), (int)task_cpu(p), mm->oom_adj, p->comm);
+ get_mm_rss(mm), (int)task_cpu(p), p->oomkilladj,
+ p->comm);
task_unlock(p);
} while_each_thread(g, p);
}
return;
}
- if (!p->mm)
+ if (!p->mm) {
+ WARN_ON(1);
+ printk(KERN_WARNING "tried to kill an mm-less task!\n");
return;
+ }
if (verbose)
printk(KERN_ERR "Killed process %d (%s)\n",
struct mm_struct *mm;
struct task_struct *g, *q;
- task_lock(p);
mm = p->mm;
- if (!mm || mm->oom_adj == OOM_DISABLE) {
- task_unlock(p);
+
+ /* WARNING: mm may not be dereferenced since we did not obtain its
+ * value from get_task_mm(p). This is OK since all we need to do is
+ * compare mm to q->mm below.
+ *
+ * Furthermore, even if mm contains a non-NULL value, p->mm may
+ * change to NULL at any time since we do not hold task_lock(p).
+ * However, this is of no concern to us.
+ */
+
+ if (mm == NULL)
return 1;
- }
- task_unlock(p);
+
+ /*
+ * Don't kill the process if any threads are set to OOM_DISABLE
+ */
+ do_each_thread(g, q) {
+ if (q->mm == mm && q->oomkilladj == OOM_DISABLE)
+ return 1;
+ } while_each_thread(g, q);
+
__oom_kill_task(p, 1);
/*
struct task_struct *c;
if (printk_ratelimit()) {
- task_lock(current);
printk(KERN_WARNING "%s invoked oom-killer: "
- "gfp_mask=0x%x, order=%d, oom_adj=%d\n",
- current->comm, gfp_mask, order,
- current->mm ? current->mm->oom_adj : OOM_DISABLE);
+ "gfp_mask=0x%x, order=%d, oomkilladj=%d\n",
+ current->comm, gfp_mask, order, current->oomkilladj);
+ task_lock(current);
cpuset_print_task_mems_allowed(current);
task_unlock(current);
dump_stack();
/*
* If the task is already exiting, don't alarm the sysadmin or kill
* its children or threads, just set TIF_MEMDIE so it can die quickly
- * if its mm is still attached.
*/
- if (p->mm && (p->flags & PF_EXITING)) {
+ if (p->flags & PF_EXITING) {
__oom_kill_task(p, 0);
return 0;
}
prev_node = local_node;
nodes_clear(used_mask);
- memset(node_load, 0, sizeof(node_load));
memset(node_order, 0, sizeof(node_order));
j = 0;
{
int nid;
+#ifdef CONFIG_NUMA
+ memset(node_load, 0, sizeof(node_load));
+#endif
for_each_online_node(nid) {
pg_data_t *pgdat = NODE_DATA(nid);
*
* This is percpu allocator which can handle both static and dynamic
* areas. Percpu areas are allocated in chunks in vmalloc area. Each
- * chunk is consisted of num_possible_cpus() units and the first chunk
- * is used for static percpu variables in the kernel image (special
- * boot time alloc/init handling necessary as these areas need to be
- * brought up before allocation services are running). Unit grows as
- * necessary and all units grow or shrink in unison. When a chunk is
- * filled up, another chunk is allocated. ie. in vmalloc area
+ * chunk is consisted of nr_cpu_ids units and the first chunk is used
+ * for static percpu variables in the kernel image (special boot time
+ * alloc/init handling necessary as these areas need to be brought up
+ * before allocation services are running). Unit grows as necessary
+ * and all units grow or shrink in unison. When a chunk is filled up,
+ * another chunk is allocated. ie. in vmalloc area
*
* c0 c1 c2
* ------------------- ------------------- ------------
static void pcpu_unmap(struct pcpu_chunk *chunk, int page_start, int page_end,
bool flush_tlb)
{
- unsigned int last = num_possible_cpus() - 1;
+ unsigned int last = nr_cpu_ids - 1;
unsigned int cpu;
/* unmap must not be done on immutable chunk */
*/
static int pcpu_map(struct pcpu_chunk *chunk, int page_start, int page_end)
{
- unsigned int last = num_possible_cpus() - 1;
+ unsigned int last = nr_cpu_ids - 1;
unsigned int cpu;
int err;
chunk->map[chunk->map_used++] = pcpu_unit_size;
chunk->page = chunk->page_ar;
- chunk->vm = get_vm_area(pcpu_chunk_size, GFP_KERNEL);
+ chunk->vm = get_vm_area(pcpu_chunk_size, VM_ALLOC);
if (!chunk->vm) {
free_pcpu_chunk(chunk);
return NULL;
PFN_UP(size_sum));
pcpu_unit_size = pcpu_unit_pages << PAGE_SHIFT;
- pcpu_chunk_size = num_possible_cpus() * pcpu_unit_size;
+ pcpu_chunk_size = nr_cpu_ids * pcpu_unit_size;
pcpu_chunk_struct_size = sizeof(struct pcpu_chunk)
- + num_possible_cpus() * pcpu_unit_pages * sizeof(struct page *);
+ + nr_cpu_ids * pcpu_unit_pages * sizeof(struct page *);
if (dyn_size < 0)
dyn_size = pcpu_unit_size - static_size - reserved_size;
} else
pcpue_unit_size = max_t(size_t, pcpue_size, PCPU_MIN_UNIT_SIZE);
- chunk_size = pcpue_unit_size * num_possible_cpus();
+ chunk_size = pcpue_unit_size * nr_cpu_ids;
pcpue_ptr = __alloc_bootmem_nopanic(chunk_size, PAGE_SIZE,
__pa(MAX_DMA_ADDRESS));
}
/* return the leftover and copy */
- for_each_possible_cpu(cpu) {
+ for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
void *ptr = pcpue_ptr + cpu * pcpue_unit_size;
- free_bootmem(__pa(ptr + pcpue_size),
- pcpue_unit_size - pcpue_size);
- memcpy(ptr, __per_cpu_load, static_size);
+ if (cpu_possible(cpu)) {
+ free_bootmem(__pa(ptr + pcpue_size),
+ pcpue_unit_size - pcpue_size);
+ memcpy(ptr, __per_cpu_load, static_size);
+ } else
+ free_bootmem(__pa(ptr), pcpue_unit_size);
}
/* we're ready, commit */
return -ENOBUFS;
*uaddr_len = sizeof(struct sockaddr_at);
+ memset(&sat.sat_zero, 0, sizeof(sat.sat_zero));
if (peer) {
if (sk->sk_state != TCP_ESTABLISHED)
if (peer)
return -EOPNOTSUPP;
+ memset(addr, 0, sizeof(*addr));
addr->can_family = AF_CAN;
addr->can_ifindex = ro->ifindex;
struct gen_estimator
{
struct list_head list;
- struct gnet_stats_basic *bstats;
+ struct gnet_stats_basic_packed *bstats;
struct gnet_stats_rate_est *rate_est;
spinlock_t *stats_lock;
int ewma_log;
}
static
-struct gen_estimator *gen_find_node(const struct gnet_stats_basic *bstats,
+struct gen_estimator *gen_find_node(const struct gnet_stats_basic_packed *bstats,
const struct gnet_stats_rate_est *rate_est)
{
struct rb_node *p = est_root.rb_node;
*
* NOTE: Called under rtnl_mutex
*/
-int gen_new_estimator(struct gnet_stats_basic *bstats,
+int gen_new_estimator(struct gnet_stats_basic_packed *bstats,
struct gnet_stats_rate_est *rate_est,
spinlock_t *stats_lock,
struct nlattr *opt)
*
* NOTE: Called under rtnl_mutex
*/
-void gen_kill_estimator(struct gnet_stats_basic *bstats,
+void gen_kill_estimator(struct gnet_stats_basic_packed *bstats,
struct gnet_stats_rate_est *rate_est)
{
struct gen_estimator *e;
*
* Returns 0 on success or a negative error code.
*/
-int gen_replace_estimator(struct gnet_stats_basic *bstats,
+int gen_replace_estimator(struct gnet_stats_basic_packed *bstats,
struct gnet_stats_rate_est *rate_est,
spinlock_t *stats_lock, struct nlattr *opt)
{
*
* Returns true if estimator is active, and false if not.
*/
-bool gen_estimator_active(const struct gnet_stats_basic *bstats,
+bool gen_estimator_active(const struct gnet_stats_basic_packed *bstats,
const struct gnet_stats_rate_est *rate_est)
{
ASSERT_RTNL();
* if the room in the socket buffer was not sufficient.
*/
int
-gnet_stats_copy_basic(struct gnet_dump *d, struct gnet_stats_basic *b)
+gnet_stats_copy_basic(struct gnet_dump *d, struct gnet_stats_basic_packed *b)
{
if (d->compat_tc_stats) {
d->tc_stats.bytes = b->bytes;
d->tc_stats.packets = b->packets;
}
- if (d->tail)
- return gnet_stats_copy(d, TCA_STATS_BASIC, b, sizeof(*b));
+ if (d->tail) {
+ struct gnet_stats_basic sb;
+ memset(&sb, 0, sizeof(sb));
+ sb.bytes = b->bytes;
+ sb.packets = b->packets;
+ return gnet_stats_copy(d, TCA_STATS_BASIC, &sb, sizeof(sb));
+ }
return 0;
}
udelay(USEC_PER_POLL);
}
+
+ WARN_ONCE(!irqs_disabled(),
+ "netpoll_send_skb(): %s enabled interrupts in poll (%pF)\n",
+ dev->name, ops->ndo_start_xmit);
+
local_irq_restore(flags);
}
kmem_cache_destroy(dccp_hashinfo.bind_bucket_cachep);
dccp_ackvec_exit();
dccp_sysctl_exit();
+ percpu_counter_destroy(&dccp_orphan_count);
}
module_init(dccp_init);
if (peer)
return -EOPNOTSUPP;
+ memset(sec, 0, sizeof(*sec));
mutex_lock(&econet_mutex);
sk = sock->sk;
unsigned int cmd)
{
struct ifreq ifr;
- int ret = -EINVAL;
+ int ret = -ENOIOCTLCMD;
struct net_device *dev;
if (copy_from_user(&ifr, arg, sizeof(struct ifreq)))
dev_load(sock_net(sk), ifr.ifr_name);
dev = dev_get_by_name(sock_net(sk), ifr.ifr_name);
- if (dev->type == ARPHRD_IEEE802154 ||
- dev->type == ARPHRD_IEEE802154_PHY)
+
+ if ((dev->type == ARPHRD_IEEE802154 ||
+ dev->type == ARPHRD_IEEE802154_PHY) &&
+ dev->netdev_ops->ndo_do_ioctl)
ret = dev->netdev_ops->ndo_do_ioctl(dev, &ifr, cmd);
if (!ret && copy_to_user(arg, &ifr, sizeof(struct ifreq)))
return ret;
}
+static int dgram_getsockopt(struct sock *sk, int level, int optname,
+ char __user *optval, int __user *optlen)
+{
+ return -EOPNOTSUPP;
+}
+
+static int dgram_setsockopt(struct sock *sk, int level, int optname,
+ char __user *optval, int __user optlen)
+{
+ return -EOPNOTSUPP;
+}
+
struct proto ieee802154_dgram_prot = {
.name = "IEEE-802.15.4-MAC",
.owner = THIS_MODULE,
.connect = dgram_connect,
.disconnect = dgram_disconnect,
.ioctl = dgram_ioctl,
+ .getsockopt = dgram_getsockopt,
+ .setsockopt = dgram_setsockopt,
};
read_unlock(&raw_lock);
}
+static int raw_getsockopt(struct sock *sk, int level, int optname,
+ char __user *optval, int __user *optlen)
+{
+ return -EOPNOTSUPP;
+}
+
+static int raw_setsockopt(struct sock *sk, int level, int optname,
+ char __user *optval, int __user optlen)
+{
+ return -EOPNOTSUPP;
+}
+
struct proto ieee802154_raw_prot = {
.name = "IEEE-802.15.4-RAW",
.owner = THIS_MODULE,
.unhash = raw_unhash,
.connect = raw_connect,
.disconnect = raw_disconnect,
+ .getsockopt = raw_getsockopt,
+ .setsockopt = raw_setsockopt,
};
addend += 4;
}
dev->needed_headroom = addend + hlen;
- mtu -= dev->hard_header_len - addend;
+ mtu -= dev->hard_header_len + addend;
if (mtu < 68)
mtu = 68;
v4addr != htonl(INADDR_ANY) &&
chk_addr_ret != RTN_LOCAL &&
chk_addr_ret != RTN_MULTICAST &&
- chk_addr_ret != RTN_BROADCAST)
+ chk_addr_ret != RTN_BROADCAST) {
+ err = -EADDRNOTAVAIL;
goto out;
+ }
} else {
if (addr_type != IPV6_ADDR_ANY) {
struct net_device *dev = NULL;
struct sock *sk = sock->sk;
struct irda_sock *self = irda_sk(sk);
+ memset(&saddr, 0, sizeof(saddr));
if (peer) {
if (sk->sk_state != TCP_ESTABLISHED)
return -ENOTCONN;
struct llc_sock *llc = llc_sk(sk);
int rc = 0;
+ memset(&sllc, 0, sizeof(sllc));
lock_sock(sk);
if (sock_flag(sk, SOCK_ZAPPED))
goto out;
&local->hw, queue,
IEEE80211_QUEUE_STOP_REASON_AGGREGATION);
+ if (!(sta->ampdu_mlme.tid_state_tx[tid] & HT_ADDBA_REQUESTED_MSK))
+ return;
+
+ if (WARN(!sta->ampdu_mlme.tid_tx[tid],
+ "TID %d gone but expected when splicing aggregates from"
+ "the pending queue\n", tid))
+ return;
+
if (!skb_queue_empty(&sta->ampdu_mlme.tid_tx[tid]->pending)) {
spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
/* mark queue as pending, it is stopped already */
*
* @key: key to add to do item for
* @flag: todo flag(s)
+ *
+ * Must be called with IRQs or softirqs disabled.
*/
static void add_todo(struct ieee80211_key *key, u32 flag)
{
ret = drv_set_key(key->local, SET_KEY, &sdata->vif, sta, &key->conf);
if (!ret) {
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE;
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
}
if (ret && ret != -ENOSPC && ret != -EOPNOTSUPP)
if (!key || !key->local->ops->set_key)
return;
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
if (!(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) {
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
return;
}
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
sta = get_sta_for_key(key);
sdata = key->sdata;
wiphy_name(key->local->hw.wiphy),
key->conf.keyidx, sta ? sta->addr : bcast_addr, ret);
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE;
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
}
static void __ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata,
__ieee80211_key_replace(sdata, sta, old_key, key);
- spin_unlock_irqrestore(&sdata->local->key_lock, flags);
-
/* free old key later */
add_todo(old_key, KEY_FLAG_TODO_DELETE);
add_todo(key, KEY_FLAG_TODO_ADD_DEBUGFS);
if (netif_running(sdata->dev))
add_todo(key, KEY_FLAG_TODO_HWACCEL_ADD);
+
+ spin_unlock_irqrestore(&sdata->local->key_lock, flags);
}
static void __ieee80211_key_free(struct ieee80211_key *key)
*/
synchronize_rcu();
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
while (!list_empty(&todo_list)) {
key = list_first_entry(&todo_list, struct ieee80211_key, todo);
list_del_init(&key->todo);
KEY_FLAG_TODO_HWACCEL_REMOVE |
KEY_FLAG_TODO_DELETE);
key->flags &= ~todoflags;
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
work_done = false;
WARN_ON(!work_done);
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
}
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
}
void ieee80211_key_todo(void)
xt_rateest_tg(struct sk_buff *skb, const struct xt_target_param *par)
{
const struct xt_rateest_target_info *info = par->targinfo;
- struct gnet_stats_basic *stats = &info->est->bstats;
+ struct gnet_stats_basic_packed *stats = &info->est->bstats;
spin_lock_bh(&info->est->lock);
stats->bytes += skb->len;
q->master = kmalloc(sizeof(*q->master), GFP_KERNEL);
if (q->master == NULL)
- return -ENOMEM;
+ return false;
q->master->quota = q->quota;
return true;
sax->fsa_ax25.sax25_family = AF_NETROM;
sax->fsa_ax25.sax25_ndigis = 1;
sax->fsa_ax25.sax25_call = nr->user_addr;
+ memset(sax->fsa_digipeater, 0, sizeof(sax->fsa_digipeater));
sax->fsa_digipeater[0] = nr->dest_addr;
*uaddr_len = sizeof(struct full_sockaddr_ax25);
} else {
return dev;
}
-static ax25_digi *nr_call_to_digi(int ndigis, ax25_address *digipeaters)
+static ax25_digi *nr_call_to_digi(ax25_digi *digi, int ndigis,
+ ax25_address *digipeaters)
{
- static ax25_digi ax25_digi;
int i;
if (ndigis == 0)
return NULL;
for (i = 0; i < ndigis; i++) {
- ax25_digi.calls[i] = digipeaters[i];
- ax25_digi.repeated[i] = 0;
+ digi->calls[i] = digipeaters[i];
+ digi->repeated[i] = 0;
}
- ax25_digi.ndigi = ndigis;
- ax25_digi.lastrepeat = -1;
+ digi->ndigi = ndigis;
+ digi->lastrepeat = -1;
- return &ax25_digi;
+ return digi;
}
/*
{
struct nr_route_struct nr_route;
struct net_device *dev;
+ ax25_digi digi;
int ret;
switch (cmd) {
ret = nr_add_node(&nr_route.callsign,
nr_route.mnemonic,
&nr_route.neighbour,
- nr_call_to_digi(nr_route.ndigis, nr_route.digipeaters),
+ nr_call_to_digi(&digi, nr_route.ndigis,
+ nr_route.digipeaters),
dev, nr_route.quality,
nr_route.obs_count);
break;
case NETROM_NEIGH:
ret = nr_add_neigh(&nr_route.callsign,
- nr_call_to_digi(nr_route.ndigis, nr_route.digipeaters),
+ nr_call_to_digi(&digi, nr_route.ndigis,
+ nr_route.digipeaters),
dev, nr_route.quality);
break;
default:
{
struct phonet_device_list *pndevs = phonet_device_list(net);
struct phonet_device *pnd;
- struct net_device *dev;
+ struct net_device *dev = NULL;
spin_lock_bh(&pndevs->lock);
list_for_each_entry(pnd, &pndevs->list, list) {
struct rose_sock *rose = rose_sk(sk);
int n;
+ memset(srose, 0, sizeof(*srose));
if (peer != 0) {
if (sk->sk_state != TCP_ESTABLISHED)
return -ENOTCONN;
void qdisc_watchdog_init(struct qdisc_watchdog *wd, struct Qdisc *qdisc)
{
- hrtimer_init(&wd->timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
- wd->timer.function = qdisc_watchdog;
+ tasklet_hrtimer_init(&wd->timer, qdisc_watchdog,
+ CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
wd->qdisc = qdisc;
}
EXPORT_SYMBOL(qdisc_watchdog_init);
wd->qdisc->flags |= TCQ_F_THROTTLED;
time = ktime_set(0, 0);
time = ktime_add_ns(time, PSCHED_TICKS2NS(expires));
- hrtimer_start(&wd->timer, time, HRTIMER_MODE_ABS);
+ tasklet_hrtimer_start(&wd->timer, time, HRTIMER_MODE_ABS);
}
EXPORT_SYMBOL(qdisc_watchdog_schedule);
void qdisc_watchdog_cancel(struct qdisc_watchdog *wd)
{
- hrtimer_cancel(&wd->timer);
+ tasklet_hrtimer_cancel(&wd->timer);
wd->qdisc->flags &= ~TCQ_F_THROTTLED;
}
EXPORT_SYMBOL(qdisc_watchdog_cancel);
struct socket *sock; /* for closing */
u32 classid; /* x:y type ID */
int ref; /* reference count */
- struct gnet_stats_basic bstats;
+ struct gnet_stats_basic_packed bstats;
struct gnet_stats_queue qstats;
struct atm_flow_data *next;
struct atm_flow_data *excess; /* flow for excess traffic;
long avgidle;
long deficit; /* Saved deficit for WRR */
psched_time_t penalized;
- struct gnet_stats_basic bstats;
+ struct gnet_stats_basic_packed bstats;
struct gnet_stats_queue qstats;
struct gnet_stats_rate_est rate_est;
struct tc_cbq_xstats xstats;
psched_time_t now_rt; /* Cached real time */
unsigned pmask;
- struct hrtimer delay_timer;
+ struct tasklet_hrtimer delay_timer;
struct qdisc_watchdog watchdog; /* Watchdog timer,
started when CBQ has
backlog, but cannot
cl->undertime = q->now + delay;
if (delay > 0) {
+ struct hrtimer *ht;
+
sched += delay + cl->penalty;
cl->penalized = sched;
cl->cpriority = TC_CBQ_MAXPRIO;
expires = ktime_set(0, 0);
expires = ktime_add_ns(expires, PSCHED_TICKS2NS(sched));
- if (hrtimer_try_to_cancel(&q->delay_timer) &&
- ktime_to_ns(ktime_sub(
- hrtimer_get_expires(&q->delay_timer),
- expires)) > 0)
- hrtimer_set_expires(&q->delay_timer, expires);
- hrtimer_restart(&q->delay_timer);
+ ht = &q->delay_timer.timer;
+ if (hrtimer_try_to_cancel(ht) &&
+ ktime_to_ns(ktime_sub(hrtimer_get_expires(ht),
+ expires)) > 0)
+ hrtimer_set_expires(ht, expires);
+ hrtimer_restart(ht);
cl->delayed = 1;
cl->xstats.overactions++;
return;
time = ktime_set(0, 0);
time = ktime_add_ns(time, PSCHED_TICKS2NS(now + delay));
- hrtimer_start(&q->delay_timer, time, HRTIMER_MODE_ABS);
+ tasklet_hrtimer_start(&q->delay_timer, time, HRTIMER_MODE_ABS);
}
sch->flags &= ~TCQ_F_THROTTLED;
q->tx_class = NULL;
q->tx_borrowed = NULL;
qdisc_watchdog_cancel(&q->watchdog);
- hrtimer_cancel(&q->delay_timer);
+ tasklet_hrtimer_cancel(&q->delay_timer);
q->toplevel = TC_CBQ_MAXLEVEL;
q->now = psched_get_time();
q->now_rt = q->now;
q->link.minidle = -0x7FFFFFFF;
qdisc_watchdog_init(&q->watchdog, sch);
- hrtimer_init(&q->delay_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+ tasklet_hrtimer_init(&q->delay_timer, cbq_undelay,
+ CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
q->delay_timer.function = cbq_undelay;
q->toplevel = TC_CBQ_MAXLEVEL;
q->now = psched_get_time();
unsigned int refcnt;
unsigned int filter_cnt;
- struct gnet_stats_basic bstats;
+ struct gnet_stats_basic_packed bstats;
struct gnet_stats_queue qstats;
struct gnet_stats_rate_est rate_est;
struct list_head alist;
struct Qdisc_class_common cl_common;
unsigned int refcnt; /* usage count */
- struct gnet_stats_basic bstats;
+ struct gnet_stats_basic_packed bstats;
struct gnet_stats_queue qstats;
struct gnet_stats_rate_est rate_est;
unsigned int level; /* class level in hierarchy */
struct htb_class {
struct Qdisc_class_common common;
/* general class parameters */
- struct gnet_stats_basic bstats;
+ struct gnet_stats_basic_packed bstats;
struct gnet_stats_queue qstats;
struct gnet_stats_rate_est rate_est;
struct tc_htb_xstats xstats; /* our special stats */
remove_proc_entry("sctp", init_net.proc_net);
}
#endif
+ percpu_counter_destroy(&sctp_sockets_allocated);
}
/* Private helper to extract ipv4 address and stash them in
static inline unsigned int __xfrm4_daddr_saddr_hash(xfrm_address_t *daddr, xfrm_address_t *saddr)
{
- return ntohl(daddr->a4 ^ saddr->a4);
+ return ntohl(daddr->a4 + saddr->a4);
}
static inline unsigned int __xfrm6_daddr_saddr_hash(xfrm_address_t *daddr, xfrm_address_t *saddr)
If you are unsure how to answer this question, answer N.
+config LSM_MMAP_MIN_ADDR
+ int "Low address space for LSM to protect from user allocation"
+ depends on SECURITY && SECURITY_SELINUX
+ default 65536
+ help
+ This is the portion of low virtual memory which should be protected
+ from userspace allocation. Keeping a user from writing to low pages
+ can help reduce the impact of kernel NULL pointer bugs.
+
+ For most ia64, ppc64 and x86 users with lots of address space
+ a value of 65536 is reasonable and should cause no problems.
+ On arm and other archs it should not be higher than 32768.
+ Programs which use vm86 functionality or have some need to map
+ this low address space will need the permission specific to the
+ systems running LSM.
+
source security/selinux/Kconfig
source security/smack/Kconfig
source security/tomoyo/Kconfig
subdir-$(CONFIG_SECURITY_TOMOYO) += tomoyo
# always enable default capabilities
-obj-y += commoncap.o
+obj-y += commoncap.o min_addr.o
# Object file lists
obj-$(CONFIG_SECURITY) += security.o capability.o
return 0;
}
-static int cap_file_mmap(struct file *file, unsigned long reqprot,
- unsigned long prot, unsigned long flags,
- unsigned long addr, unsigned long addr_only)
-{
- if ((addr < mmap_min_addr) && !capable(CAP_SYS_RAWIO))
- return -EACCES;
- return 0;
-}
-
static int cap_file_mprotect(struct vm_area_struct *vma, unsigned long reqprot,
unsigned long prot)
{
cap_sys_admin = 1;
return __vm_enough_memory(mm, pages, cap_sys_admin);
}
+
+/*
+ * cap_file_mmap - check if able to map given addr
+ * @file: unused
+ * @reqprot: unused
+ * @prot: unused
+ * @flags: unused
+ * @addr: address attempting to be mapped
+ * @addr_only: unused
+ *
+ * If the process is attempting to map memory below mmap_min_addr they need
+ * CAP_SYS_RAWIO. The other parameters to this function are unused by the
+ * capability security module. Returns 0 if this mapping should be allowed
+ * -EPERM if not.
+ */
+int cap_file_mmap(struct file *file, unsigned long reqprot,
+ unsigned long prot, unsigned long flags,
+ unsigned long addr, unsigned long addr_only)
+{
+ int ret = 0;
+
+ if (addr < dac_mmap_min_addr) {
+ ret = cap_capable(current, current_cred(), CAP_SYS_RAWIO,
+ SECURITY_CAP_AUDIT);
+ /* set PF_SUPERPRIV if it turns out we allow the low mmap */
+ if (ret == 0)
+ current->flags |= PF_SUPERPRIV;
+ }
+ return ret;
+}
{
struct hash_desc desc;
struct scatterlist sg[1];
- loff_t i_size;
+ loff_t i_size, offset = 0;
char *rbuf;
- int rc, offset = 0;
+ int rc;
rc = init_desc(&desc);
if (rc != 0)
rc = rbuf_len;
break;
}
+ if (rbuf_len == 0)
+ break;
offset += rbuf_len;
sg_init_one(sg, rbuf, rbuf_len);
--- /dev/null
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/security.h>
+#include <linux/sysctl.h>
+
+/* amount of vm to protect from userspace access by both DAC and the LSM*/
+unsigned long mmap_min_addr;
+/* amount of vm to protect from userspace using CAP_SYS_RAWIO (DAC) */
+unsigned long dac_mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR;
+/* amount of vm to protect from userspace using the LSM = CONFIG_LSM_MMAP_MIN_ADDR */
+
+/*
+ * Update mmap_min_addr = max(dac_mmap_min_addr, CONFIG_LSM_MMAP_MIN_ADDR)
+ */
+static void update_mmap_min_addr(void)
+{
+#ifdef CONFIG_LSM_MMAP_MIN_ADDR
+ if (dac_mmap_min_addr > CONFIG_LSM_MMAP_MIN_ADDR)
+ mmap_min_addr = dac_mmap_min_addr;
+ else
+ mmap_min_addr = CONFIG_LSM_MMAP_MIN_ADDR;
+#else
+ mmap_min_addr = dac_mmap_min_addr;
+#endif
+}
+
+/*
+ * sysctl handler which just sets dac_mmap_min_addr = the new value and then
+ * calls update_mmap_min_addr() so non MAP_FIXED hints get rounded properly
+ */
+int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp,
+ void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+ int ret;
+
+ ret = proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos);
+
+ update_mmap_min_addr();
+
+ return ret;
+}
+
+int __init init_mmap_min_addr(void)
+{
+ update_mmap_min_addr();
+
+ return 0;
+}
+pure_initcall(init_mmap_min_addr);
int rc = 0;
u32 sid = current_sid();
- if (addr < mmap_min_addr)
+ /*
+ * notice that we are intentionally putting the SELinux check before
+ * the secondary cap_file_mmap check. This is such a likely attempt
+ * at bad behaviour/exploit that we always want to get the AVC, even
+ * if DAC would have also denied the operation.
+ */
+ if (addr < CONFIG_LSM_MMAP_MIN_ADDR) {
rc = avc_has_perm(sid, sid, SECCLASS_MEMPROTECT,
MEMPROTECT__MMAP_ZERO, NULL);
+ if (rc)
+ return rc;
+ }
+
+ /* do DAC check on address space usage */
+ rc = cap_file_mmap(file, reqprot, prot, flags, addr, addr_only);
if (rc || addr_only)
return rc;
int snd_interval_list(struct snd_interval *i, unsigned int count, unsigned int *list, unsigned int mask)
{
unsigned int k;
- int changed = 0;
+ struct snd_interval list_range;
if (!count) {
i->empty = 1;
return -EINVAL;
}
+ snd_interval_any(&list_range);
+ list_range.min = UINT_MAX;
+ list_range.max = 0;
for (k = 0; k < count; k++) {
if (mask && !(mask & (1 << k)))
continue;
- if (i->min == list[k] && !i->openmin)
- goto _l1;
- if (i->min < list[k]) {
- i->min = list[k];
- i->openmin = 0;
- changed = 1;
- goto _l1;
- }
- }
- i->empty = 1;
- return -EINVAL;
- _l1:
- for (k = count; k-- > 0;) {
- if (mask && !(mask & (1 << k)))
+ if (!snd_interval_test(i, list[k]))
continue;
- if (i->max == list[k] && !i->openmax)
- goto _l2;
- if (i->max > list[k]) {
- i->max = list[k];
- i->openmax = 0;
- changed = 1;
- goto _l2;
- }
+ list_range.min = min(list_range.min, list[k]);
+ list_range.max = max(list_range.max, list[k]);
}
- i->empty = 1;
- return -EINVAL;
- _l2:
- if (snd_interval_checkempty(i)) {
- i->empty = 1;
- return -EINVAL;
- }
- return changed;
+ return snd_interval_refine(i, &list_range);
}
EXPORT_SYMBOL(snd_interval_list);
unsigned int res;
end_time = jiffies + msecs_to_jiffies(250);
- do {
+
+ for (;;) {
res = snd_ali_5451_peek(codec,port);
if (!(res & 0x8000))
return 0;
+ if (!time_after_eq(end_time, jiffies))
+ break;
schedule_timeout_uninterruptible(1);
- } while (time_after_eq(end_time, jiffies));
+ }
+
snd_ali_5451_poke(codec, port, res & ~0x8000);
snd_printdd("ali_codec_ready: codec is not ready.\n ");
return -EIO;
unsigned long dwChk1,dwChk2;
dwChk1 = snd_ali_5451_peek(codec, ALI_STIMER);
- dwChk2 = snd_ali_5451_peek(codec, ALI_STIMER);
-
end_time = jiffies + msecs_to_jiffies(250);
- do {
+
+ for (;;) {
dwChk2 = snd_ali_5451_peek(codec, ALI_STIMER);
if (dwChk2 != dwChk1)
return 0;
+ if (!time_after_eq(end_time, jiffies))
+ break;
schedule_timeout_uninterruptible(1);
- } while (time_after_eq(end_time, jiffies));
+ }
+
snd_printk(KERN_ERR "ali_stimer_read: stimer is not ready.\n");
return -EIO;
}
/* Port-F (int speaker) mixer - route only from analog mixer */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- /* Port-F pin */
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ /* Port-F (int speaker) pin */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* required for compaq 6530s/6531s speaker output */
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* Port-C pin - internal mic-in */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
ALC268_TOSHIBA),
SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
- SND_PCI_QUIRK_MASK(0x1179, 0xff00, 0xff00, "TOSHIBA A/Lx05",
- ALC268_TOSHIBA),
SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA),
SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER),
SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1),
{}
};
+/* Toshiba laptops have no unique PCI SSID but only codec SSID */
+static struct snd_pci_quirk alc268_ssid_cfg_tbl[] = {
+ SND_PCI_QUIRK(0x1179, 0xff0a, "TOSHIBA X-200", ALC268_AUTO),
+ SND_PCI_QUIRK(0x1179, 0xff0e, "TOSHIBA X-200 HDMI", ALC268_AUTO),
+ SND_PCI_QUIRK_MASK(0x1179, 0xff00, 0xff00, "TOSHIBA A/Lx05",
+ ALC268_TOSHIBA),
+ {}
+};
+
static struct alc_config_preset alc268_presets[] = {
[ALC267_QUANTA_IL1] = {
.mixers = { alc267_quanta_il1_mixer, alc268_beep_mixer },
alc268_models,
alc268_cfg_tbl);
+ if (board_config < 0 || board_config >= ALC268_MODEL_LAST)
+ board_config = snd_hda_check_board_codec_sid_config(codec,
+ ALC882_MODEL_LAST, alc268_models, alc268_ssid_cfg_tbl);
+
if (board_config < 0 || board_config >= ALC268_MODEL_LAST) {
printk(KERN_INFO "hda_codec: Unknown model for %s, "
"trying auto-probe from BIOS...\n", codec->chip_name);
STAC_92HD73XX_AUTO,
STAC_92HD73XX_NO_JD, /* no jack-detection */
STAC_92HD73XX_REF,
+ STAC_92HD73XX_INTEL,
STAC_DELL_M6_AMIC,
STAC_DELL_M6_DMIC,
STAC_DELL_M6_BOTH,
[STAC_92HD73XX_AUTO] = "auto",
[STAC_92HD73XX_NO_JD] = "no-jd",
[STAC_92HD73XX_REF] = "ref",
+ [STAC_92HD73XX_INTEL] = "intel",
[STAC_DELL_M6_AMIC] = "dell-m6-amic",
[STAC_DELL_M6_DMIC] = "dell-m6-dmic",
[STAC_DELL_M6_BOTH] = "dell-m6",
"DFI LanParty", STAC_92HD73XX_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
"DFI LanParty", STAC_92HD73XX_REF),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x5002,
+ "Intel DG45ID", STAC_92HD73XX_INTEL),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x5003,
+ "Intel DG45FC", STAC_92HD73XX_INTEL),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0254,
"Dell Studio 1535", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0255,
struct vx_core *_chip = snd_kcontrol_chip(kcontrol);
struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
if (ucontrol->value.integer.value[0] < 0 ||
- ucontrol->value.integer.value[0] < MIC_LEVEL_MAX)
+ ucontrol->value.integer.value[0] > MIC_LEVEL_MAX)
return -EINVAL;
if (ucontrol->value.integer.value[1] < 0 ||
- ucontrol->value.integer.value[1] < MIC_LEVEL_MAX)
+ ucontrol->value.integer.value[1] > MIC_LEVEL_MAX)
return -EINVAL;
mutex_lock(&_chip->mixer_mutex);
if (chip->input_level[0] != ucontrol->value.integer.value[0] ||
git.openpandora.org / pandora-kernel.git / commitdiff