Add missing KERN_* suffix to printk.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
buf[0] = reg & 0x7f;
buf[1] = val;
if ((err = snd_i2c_sendbytes(device, buf, 2)) != 2) {
- snd_printk("unable to send bytes 0x%02x:0x%02x to CS8427 (%i)\n", buf[0], buf[1], err);
+ snd_printk(KERN_ERR "unable to send bytes 0x%02x:0x%02x to CS8427 (%i)\n", buf[0], buf[1], err);
return err < 0 ? err : -EIO;
}
return 0;
unsigned char buf;
if ((err = snd_i2c_sendbytes(device, ®, 1)) != 1) {
- snd_printk("unable to send register 0x%x byte to CS8427\n", reg);
+ snd_printk(KERN_ERR "unable to send register 0x%x byte to CS8427\n", reg);
return err < 0 ? err : -EIO;
}
if ((err = snd_i2c_readbytes(device, &buf, 1)) != 1) {
- snd_printk("unable to read register 0x%x byte from CS8427\n", reg);
+ snd_printk(KERN_ERR "unable to read register 0x%x byte from CS8427\n", reg);
return err < 0 ? err : -EIO;
}
return buf;
snd_i2c_lock(bus);
if ((err = snd_cs8427_reg_read(device, CS8427_REG_ID_AND_VER)) != CS8427_VER8427A) {
snd_i2c_unlock(bus);
- snd_printk("unable to find CS8427 signature (expected 0x%x, read 0x%x), initialization is not completed\n", CS8427_VER8427A, err);
+ snd_printk(KERN_ERR "unable to find CS8427 signature (expected 0x%x, read 0x%x), initialization is not completed\n", CS8427_VER8427A, err);
return -EFAULT;
}
/* turn off run bit while making changes to configuration */
snd_i2c_sendbytes(device, buf, 1);
snd_i2c_readbytes(device, buf, 127);
for (xx = 0; xx < 127; xx++)
- printk("reg[0x%x] = 0x%x\n", xx+1, buf[xx]);
+ printk(KERN_DEBUG "reg[0x%x] = 0x%x\n", xx+1, buf[xx]);
}
#endif
snd_i2c_lock(device->bus);
if ((err = snd_i2c_sendbytes(device, ®, 1)) != 1) {
- snd_printk("unable to send register 0x%x byte to CS8427\n", reg);
+ snd_printk(KERN_ERR "unable to send register 0x%x byte to CS8427\n", reg);
snd_i2c_unlock(device->bus);
return err < 0 ? err : -EIO;
}
if ((err = snd_i2c_readbytes(device, ucontrol->value.bytes.data, 10)) != 10) {
- snd_printk("unable to read Q-subcode bytes from CS8427\n");
+ snd_printk(KERN_ERR "unable to read Q-subcode bytes from CS8427\n");
snd_i2c_unlock(device->bus);
return err < 0 ? err : -EIO;
}
{
int i;
- printk("AK4114 REG DUMP:\n");
+ printk(KERN_DEBUG "AK4114 REG DUMP:\n");
for (i = 0; i < 0x20; i++)
- printk("reg[%02x] = %02x (%02x)\n", i, reg_read(ak4114, i), i < sizeof(ak4114->regmap) ? ak4114->regmap[i] : 0);
+ printk(KERN_DEBUG "reg[%02x] = %02x (%02x)\n", i, reg_read(ak4114, i), i < sizeof(ak4114->regmap) ? ak4114->regmap[i] : 0);
}
#endif
if (!(flags & AK4114_CHECK_NO_RATE) && runtime && runtime->rate != res) {
snd_pcm_stream_lock_irqsave(ak4114->capture_substream, _flags);
if (snd_pcm_running(ak4114->capture_substream)) {
- // printk("rate changed (%i <- %i)\n", runtime->rate, res);
+ // printk(KERN_DEBUG "rate changed (%i <- %i)\n", runtime->rate, res);
snd_pcm_stop(ak4114->capture_substream, SNDRV_PCM_STATE_DRAINING);
res = 1;
}
{
int i;
- printk("AK4117 REG DUMP:\n");
+ printk(KERN_DEBUG "AK4117 REG DUMP:\n");
for (i = 0; i < 0x1b; i++)
- printk("reg[%02x] = %02x (%02x)\n", i, reg_read(ak4117, i), i < sizeof(ak4117->regmap) ? ak4117->regmap[i] : 0);
+ printk(KERN_DEBUG "reg[%02x] = %02x (%02x)\n", i, reg_read(ak4117, i), i < sizeof(ak4117->regmap) ? ak4117->regmap[i] : 0);
}
#endif
goto __rate;
rcs0 = reg_read(ak4117, AK4117_REG_RCS0);
rcs2 = reg_read(ak4117, AK4117_REG_RCS2);
- // printk("AK IRQ: rcs0 = 0x%x, rcs1 = 0x%x, rcs2 = 0x%x\n", rcs0, rcs1, rcs2);
+ // printk(KERN_DEBUG "AK IRQ: rcs0 = 0x%x, rcs1 = 0x%x, rcs2 = 0x%x\n", rcs0, rcs1, rcs2);
spin_lock_irqsave(&ak4117->lock, _flags);
if (rcs0 & AK4117_PAR)
ak4117->parity_errors++;
if (!(flags & AK4117_CHECK_NO_RATE) && runtime && runtime->rate != res) {
snd_pcm_stream_lock_irqsave(ak4117->substream, _flags);
if (snd_pcm_running(ak4117->substream)) {
- // printk("rate changed (%i <- %i)\n", runtime->rate, res);
+ // printk(KERN_DEBUG "rate changed (%i <- %i)\n", runtime->rate, res);
snd_pcm_stop(ak4117->substream, SNDRV_PCM_STATE_DRAINING);
wake_up(&runtime->sleep);
res = 1;
unsigned char addr, unsigned char value)
{
#if 0
- printk("set - 0x%x/0x%x\n", addr, value);
+ printk(KERN_DEBUG "set - 0x%x/0x%x\n", addr, value);
#endif
snd_i2c_write(tea->bus, TEA6330T_ADDR, addr, value, 1);
}
udelay(100);
#ifdef CONFIG_SND_DEBUG
if (inb(AD1848P(chip, REGSEL)) & AD1848_INIT)
- snd_printk("auto calibration time out - reg = 0x%x, value = 0x%x\n", reg, value);
+ snd_printk(KERN_WARNING "auto calibration time out - reg = 0x%x, value = 0x%x\n", reg, value);
#endif
outb(chip->mce_bit | reg, AD1848P(chip, REGSEL));
outb(chip->image[reg] = value, AD1848P(chip, REG));
udelay(100);
#ifdef CONFIG_SND_DEBUG
if (inb(AD1848P(chip, REGSEL)) & AD1848_INIT)
- snd_printk("auto calibration time out - reg = 0x%x\n", reg);
+ snd_printk(KERN_WARNING "auto calibration time out - reg = 0x%x\n", reg);
#endif
outb(chip->mce_bit | reg, AD1848P(chip, REGSEL));
mb();
udelay(100);
#ifdef CONFIG_SND_DEBUG
if (inb(AD1848P(chip, REGSEL)) & AD1848_INIT)
- snd_printk("mce_up - auto calibration time out (0)\n");
+ snd_printk(KERN_WARNING "mce_up - auto calibration time out (0)\n");
#endif
spin_lock_irqsave(&chip->reg_lock, flags);
chip->mce_bit |= AD1848_MCE;
timeout = inb(AD1848P(chip, REGSEL));
if (timeout == 0x80)
- snd_printk("mce_up [0x%lx]: serious init problem - codec still busy\n", chip->port);
+ snd_printk(KERN_WARNING "mce_up [0x%lx]: serious init problem - codec still busy\n", chip->port);
if (!(timeout & AD1848_MCE))
outb(chip->mce_bit | (timeout & 0x1f), AD1848P(chip, REGSEL));
spin_unlock_irqrestore(&chip->reg_lock, flags);
#endif
#ifdef CONFIG_SND_DEBUG
if (inb(AD1848P(chip, REGSEL)) & AD1848_INIT)
- snd_printk("mce_down [0x%lx] - auto calibration time out (0)\n", AD1848P(chip, REGSEL));
+ snd_printk(KERN_WARNING "mce_down [0x%lx] - auto calibration time out (0)\n", AD1848P(chip, REGSEL));
#endif
chip->mce_bit &= ~AD1848_MCE;
timeout = inb(AD1848P(chip, REGSEL));
outb(chip->mce_bit | (timeout & 0x1f), AD1848P(chip, REGSEL));
if (timeout == 0x80)
- snd_printk("mce_down [0x%lx]: serious init problem - codec still busy\n", chip->port);
+ snd_printk(KERN_WARNING "mce_down [0x%lx]: serious init problem - codec still busy\n", chip->port);
if ((timeout & AD1848_MCE) == 0) {
spin_unlock_irqrestore(&chip->reg_lock, flags);
return;
while (snd_ad1848_in(chip, AD1848_TEST_INIT) & AD1848_CALIB_IN_PROGRESS) {
spin_unlock_irqrestore(&chip->reg_lock, flags);
if (time <= 0) {
- snd_printk("mce_down - auto calibration time out (2)\n");
+ snd_printk(KERN_ERR "mce_down - auto calibration time out (2)\n");
return;
}
set_current_state(TASK_INTERRUPTIBLE);
while (inb(AD1848P(chip, REGSEL)) & AD1848_INIT) {
spin_unlock_irqrestore(&chip->reg_lock, flags);
if (time <= 0) {
- snd_printk("mce_down - auto calibration time out (3)\n");
+ snd_printk(KERN_ERR "mce_down - auto calibration time out (3)\n");
return;
}
set_current_state(TASK_INTERRUPTIBLE);
outb(val, chip->port + 0x0C);
return 0;
}
- snd_printk("dsp_command: timeout (0x%x)\n", val);
+ snd_printk(KERN_ERR "dsp_command: timeout (0x%x)\n", val);
return -EINVAL;
}
for(i = MILLISECOND/10; i; i--)
if (inb(chip->port + 0x0C) & 0x40)
return inb(chip->port + 0x0A);
- snd_printk("dsp_get_byte failed: 0x%lx = 0x%x!!!\n", chip->port + 0x0A, inb(chip->port + 0x0A));
+ snd_printk(KERN_ERR "dsp_get_byte failed: 0x%lx = 0x%x!!!\n",
+ chip->port + 0x0A, inb(chip->port + 0x0A));
return -ENODEV;
}
end:
spin_unlock_irqrestore(&chip->reg_lock, flags);
#ifdef REG_DEBUG
- snd_printk("Reg %02x set to %02x\n", reg, data);
+ snd_printk(KERN_DEBUG "Reg %02x set to %02x\n", reg, data);
#endif
return ret;
}
data = snd_es18xx_dsp_get_byte(chip);
ret = data;
#ifdef REG_DEBUG
- snd_printk("Reg %02x now is %02x (%d)\n", reg, data, ret);
+ snd_printk(KERN_DEBUG "Reg %02x now is %02x (%d)\n", reg, data, ret);
#endif
end:
spin_unlock_irqrestore(&chip->reg_lock, flags);
if (ret < 0)
goto end;
#ifdef REG_DEBUG
- snd_printk("Reg %02x was %02x, set to %02x (%d)\n", reg, old, new, ret);
+ snd_printk(KERN_DEBUG "Reg %02x was %02x, set to %02x (%d)\n",
+ reg, old, new, ret);
#endif
}
ret = oval;
outb(data, chip->port + 0x05);
spin_unlock_irqrestore(&chip->mixer_lock, flags);
#ifdef REG_DEBUG
- snd_printk("Mixer reg %02x set to %02x\n", reg, data);
+ snd_printk(KERN_DEBUG "Mixer reg %02x set to %02x\n", reg, data);
#endif
}
data = inb(chip->port + 0x05);
spin_unlock_irqrestore(&chip->mixer_lock, flags);
#ifdef REG_DEBUG
- snd_printk("Mixer reg %02x now is %02x\n", reg, data);
+ snd_printk(KERN_DEBUG "Mixer reg %02x now is %02x\n", reg, data);
#endif
return data;
}
new = (old & ~mask) | (val & mask);
outb(new, chip->port + 0x05);
#ifdef REG_DEBUG
- snd_printk("Mixer reg %02x was %02x, set to %02x\n", reg, old, new);
+ snd_printk(KERN_DEBUG "Mixer reg %02x was %02x, set to %02x\n",
+ reg, old, new);
#endif
}
spin_unlock_irqrestore(&chip->mixer_lock, flags);
new = inb(chip->port + 0x05);
spin_unlock_irqrestore(&chip->mixer_lock, flags);
#ifdef REG_DEBUG
- snd_printk("Mixer reg %02x was %02x, set to %02x, now is %02x\n", reg, old, expected, new);
+ snd_printk(KERN_DEBUG "Mixer reg %02x was %02x, set to %02x, now is %02x\n",
+ reg, old, expected, new);
#endif
return expected == new;
}
outb(reg, chip->ctrl_port);
outb(data, chip->ctrl_port + 1);
#ifdef REG_DEBUG
- snd_printk("Config reg %02x set to %02x\n", reg, data);
+ snd_printk(KERN_DEBUG "Config reg %02x set to %02x\n", reg, data);
#endif
}
irqmask = 3;
break;
default:
- snd_printk("invalid irq %d\n", chip->irq);
+ snd_printk(KERN_ERR "invalid irq %d\n", chip->irq);
return -ENODEV;
}
switch (chip->dma1) {
dma1mask = 3;
break;
default:
- snd_printk("invalid dma1 %d\n", chip->dma1);
+ snd_printk(KERN_ERR "invalid dma1 %d\n", chip->dma1);
return -ENODEV;
}
switch (chip->dma2) {
dma2mask = 3;
break;
default:
- snd_printk("invalid dma2 %d\n", chip->dma2);
+ snd_printk(KERN_ERR "invalid dma2 %d\n", chip->dma2);
return -ENODEV;
}
/* reset */
if (snd_es18xx_reset(chip) < 0) {
- snd_printk("reset at 0x%lx failed!!!\n", chip->port);
+ snd_printk(KERN_ERR "reset at 0x%lx failed!!!\n", chip->port);
return -ENODEV;
}
chip->caps = ES18XX_PCM2 | ES18XX_RECMIX | ES18XX_AUXB | ES18XX_DUPLEX_SAME | ES18XX_HWV;
break;
default:
- snd_printk("[0x%lx] unsupported chip ES%x\n",
+ snd_printk(KERN_ERR "[0x%lx] unsupported chip ES%x\n",
chip->port, chip->version);
return -ENODEV;
}
block = kmalloc(sizeof(*block), atomic ? GFP_ATOMIC : GFP_KERNEL);
if (block == NULL) {
- snd_printk("gf1: DMA transfer failure; not enough memory\n");
+ snd_printk(KERN_ERR "gf1: DMA transfer failure; not enough memory\n");
return -ENOMEM;
}
*block = *__block;
#ifdef CONFIG_SND_DEBUG
if (!gus->interwave)
- snd_printk("snd_gf1_pokew - GF1!!!\n");
+ snd_printk(KERN_DEBUG "snd_gf1_pokew - GF1!!!\n");
#endif
spin_lock_irqsave(&gus->reg_lock, flags);
outb(SNDRV_GF1_GW_DRAM_IO_LOW, gus->gf1.reg_regsel);
#ifdef CONFIG_SND_DEBUG
if (!gus->interwave)
- snd_printk("snd_gf1_peekw - GF1!!!\n");
+ snd_printk(KERN_DEBUG "snd_gf1_peekw - GF1!!!\n");
#endif
spin_lock_irqsave(&gus->reg_lock, flags);
outb(SNDRV_GF1_GW_DRAM_IO_LOW, gus->gf1.reg_regsel);
#ifdef CONFIG_SND_DEBUG
if (!gus->interwave)
- snd_printk("snd_gf1_dram_setmem - GF1!!!\n");
+ snd_printk(KERN_DEBUG "snd_gf1_dram_setmem - GF1!!!\n");
#endif
addr &= ~1;
count >>= 1;
int voice, ctrl;
voice = gus->gf1.active_voice;
- printk(" -%i- GF1 voice ctrl, ramp ctrl = 0x%x, 0x%x\n", voice, ctrl = snd_gf1_i_read8(gus, 0), snd_gf1_i_read8(gus, 0x0d));
- printk(" -%i- GF1 frequency = 0x%x\n", voice, snd_gf1_i_read16(gus, 1));
- printk(" -%i- GF1 loop start, end = 0x%x (0x%x), 0x%x (0x%x)\n", voice, snd_gf1_i_read_addr(gus, 2, ctrl & 4), snd_gf1_i_read_addr(gus, 2, (ctrl & 4) ^ 4), snd_gf1_i_read_addr(gus, 4, ctrl & 4), snd_gf1_i_read_addr(gus, 4, (ctrl & 4) ^ 4));
- printk(" -%i- GF1 ramp start, end, rate = 0x%x, 0x%x, 0x%x\n", voice, snd_gf1_i_read8(gus, 7), snd_gf1_i_read8(gus, 8), snd_gf1_i_read8(gus, 6));
- printk(" -%i- GF1 volume = 0x%x\n", voice, snd_gf1_i_read16(gus, 9));
- printk(" -%i- GF1 position = 0x%x (0x%x)\n", voice, snd_gf1_i_read_addr(gus, 0x0a, ctrl & 4), snd_gf1_i_read_addr(gus, 0x0a, (ctrl & 4) ^ 4));
+ printk(KERN_INFO " -%i- GF1 voice ctrl, ramp ctrl = 0x%x, 0x%x\n", voice, ctrl = snd_gf1_i_read8(gus, 0), snd_gf1_i_read8(gus, 0x0d));
+ printk(KERN_INFO " -%i- GF1 frequency = 0x%x\n", voice, snd_gf1_i_read16(gus, 1));
+ printk(KERN_INFO " -%i- GF1 loop start, end = 0x%x (0x%x), 0x%x (0x%x)\n", voice, snd_gf1_i_read_addr(gus, 2, ctrl & 4), snd_gf1_i_read_addr(gus, 2, (ctrl & 4) ^ 4), snd_gf1_i_read_addr(gus, 4, ctrl & 4), snd_gf1_i_read_addr(gus, 4, (ctrl & 4) ^ 4));
+ printk(KERN_INFO " -%i- GF1 ramp start, end, rate = 0x%x, 0x%x, 0x%x\n", voice, snd_gf1_i_read8(gus, 7), snd_gf1_i_read8(gus, 8), snd_gf1_i_read8(gus, 6));
+ printk(KERN_INFO" -%i- GF1 volume = 0x%x\n", voice, snd_gf1_i_read16(gus, 9));
+ printk(KERN_INFO " -%i- GF1 position = 0x%x (0x%x)\n", voice, snd_gf1_i_read_addr(gus, 0x0a, ctrl & 4), snd_gf1_i_read_addr(gus, 0x0a, (ctrl & 4) ^ 4));
if (gus->interwave && snd_gf1_i_read8(gus, 0x19) & 0x01) { /* enhanced mode */
mode = snd_gf1_i_read8(gus, 0x15);
- printk(" -%i- GFA1 mode = 0x%x\n", voice, mode);
+ printk(KERN_INFO " -%i- GFA1 mode = 0x%x\n", voice, mode);
if (mode & 0x01) { /* Effect processor */
- printk(" -%i- GFA1 effect address = 0x%x\n", voice, snd_gf1_i_read_addr(gus, 0x11, ctrl & 4));
- printk(" -%i- GFA1 effect volume = 0x%x\n", voice, snd_gf1_i_read16(gus, 0x16));
- printk(" -%i- GFA1 effect volume final = 0x%x\n", voice, snd_gf1_i_read16(gus, 0x1d));
- printk(" -%i- GFA1 effect acumulator = 0x%x\n", voice, snd_gf1_i_read8(gus, 0x14));
+ printk(KERN_INFO " -%i- GFA1 effect address = 0x%x\n", voice, snd_gf1_i_read_addr(gus, 0x11, ctrl & 4));
+ printk(KERN_INFO " -%i- GFA1 effect volume = 0x%x\n", voice, snd_gf1_i_read16(gus, 0x16));
+ printk(KERN_INFO " -%i- GFA1 effect volume final = 0x%x\n", voice, snd_gf1_i_read16(gus, 0x1d));
+ printk(KERN_INFO " -%i- GFA1 effect acumulator = 0x%x\n", voice, snd_gf1_i_read8(gus, 0x14));
}
if (mode & 0x20) {
- printk(" -%i- GFA1 left offset = 0x%x (%i)\n", voice, snd_gf1_i_read16(gus, 0x13), snd_gf1_i_read16(gus, 0x13) >> 4);
- printk(" -%i- GFA1 left offset final = 0x%x (%i)\n", voice, snd_gf1_i_read16(gus, 0x1c), snd_gf1_i_read16(gus, 0x1c) >> 4);
- printk(" -%i- GFA1 right offset = 0x%x (%i)\n", voice, snd_gf1_i_read16(gus, 0x0c), snd_gf1_i_read16(gus, 0x0c) >> 4);
- printk(" -%i- GFA1 right offset final = 0x%x (%i)\n", voice, snd_gf1_i_read16(gus, 0x1b), snd_gf1_i_read16(gus, 0x1b) >> 4);
+ printk(KERN_INFO " -%i- GFA1 left offset = 0x%x (%i)\n", voice, snd_gf1_i_read16(gus, 0x13), snd_gf1_i_read16(gus, 0x13) >> 4);
+ printk(KERN_INFO " -%i- GFA1 left offset final = 0x%x (%i)\n", voice, snd_gf1_i_read16(gus, 0x1c), snd_gf1_i_read16(gus, 0x1c) >> 4);
+ printk(KERN_INFO " -%i- GFA1 right offset = 0x%x (%i)\n", voice, snd_gf1_i_read16(gus, 0x0c), snd_gf1_i_read16(gus, 0x0c) >> 4);
+ printk(KERN_INFO " -%i- GFA1 right offset final = 0x%x (%i)\n", voice, snd_gf1_i_read16(gus, 0x1b), snd_gf1_i_read16(gus, 0x1b) >> 4);
} else
- printk(" -%i- GF1 pan = 0x%x\n", voice, snd_gf1_i_read8(gus, 0x0c));
+ printk(KERN_INFO " -%i- GF1 pan = 0x%x\n", voice, snd_gf1_i_read8(gus, 0x0c));
} else
- printk(" -%i- GF1 pan = 0x%x\n", voice, snd_gf1_i_read8(gus, 0x0c));
+ printk(KERN_INFO " -%i- GF1 pan = 0x%x\n", voice, snd_gf1_i_read8(gus, 0x0c));
}
#if 0
{
unsigned char global_mode = 0x00;
- printk(" -G- GF1 active voices = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_ACTIVE_VOICES));
+ printk(KERN_INFO " -G- GF1 active voices = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_ACTIVE_VOICES));
if (gus->interwave) {
global_mode = snd_gf1_i_read8(gus, SNDRV_GF1_GB_GLOBAL_MODE);
- printk(" -G- GF1 global mode = 0x%x\n", global_mode);
+ printk(KERN_INFO " -G- GF1 global mode = 0x%x\n", global_mode);
}
if (global_mode & 0x02) /* LFO enabled? */
- printk(" -G- GF1 LFO base = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_LFO_BASE));
- printk(" -G- GF1 voices IRQ read = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_VOICES_IRQ_READ));
- printk(" -G- GF1 DRAM DMA control = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_DRAM_DMA_CONTROL));
- printk(" -G- GF1 DRAM DMA high/low = 0x%x/0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_DRAM_DMA_HIGH), snd_gf1_i_read16(gus, SNDRV_GF1_GW_DRAM_DMA_LOW));
- printk(" -G- GF1 DRAM IO high/low = 0x%x/0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_DRAM_IO_HIGH), snd_gf1_i_read16(gus, SNDRV_GF1_GW_DRAM_IO_LOW));
+ printk(KERN_INFO " -G- GF1 LFO base = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_LFO_BASE));
+ printk(KERN_INFO " -G- GF1 voices IRQ read = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_VOICES_IRQ_READ));
+ printk(KERN_INFO " -G- GF1 DRAM DMA control = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_DRAM_DMA_CONTROL));
+ printk(KERN_INFO " -G- GF1 DRAM DMA high/low = 0x%x/0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_DRAM_DMA_HIGH), snd_gf1_i_read16(gus, SNDRV_GF1_GW_DRAM_DMA_LOW));
+ printk(KERN_INFO " -G- GF1 DRAM IO high/low = 0x%x/0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_DRAM_IO_HIGH), snd_gf1_i_read16(gus, SNDRV_GF1_GW_DRAM_IO_LOW));
if (!gus->interwave)
- printk(" -G- GF1 record DMA control = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_REC_DMA_CONTROL));
- printk(" -G- GF1 DRAM IO 16 = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_DRAM_IO16));
+ printk(KERN_INFO " -G- GF1 record DMA control = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_REC_DMA_CONTROL));
+ printk(KERN_INFO " -G- GF1 DRAM IO 16 = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_DRAM_IO16));
if (gus->gf1.enh_mode) {
- printk(" -G- GFA1 memory config = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_MEMORY_CONFIG));
- printk(" -G- GFA1 memory control = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_MEMORY_CONTROL));
- printk(" -G- GFA1 FIFO record base = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_FIFO_RECORD_BASE_ADDR));
- printk(" -G- GFA1 FIFO playback base = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_FIFO_PLAY_BASE_ADDR));
- printk(" -G- GFA1 interleave control = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_INTERLEAVE));
+ printk(KERN_INFO " -G- GFA1 memory config = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_MEMORY_CONFIG));
+ printk(KERN_INFO " -G- GFA1 memory control = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_MEMORY_CONTROL));
+ printk(KERN_INFO " -G- GFA1 FIFO record base = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_FIFO_RECORD_BASE_ADDR));
+ printk(KERN_INFO " -G- GFA1 FIFO playback base = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_FIFO_PLAY_BASE_ADDR));
+ printk(KERN_INFO " -G- GFA1 interleave control = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_INTERLEAVE));
}
}
void snd_gf1_print_setup_registers(snd_gus_card_t * gus)
{
- printk(" -S- mix control = 0x%x\n", inb(GUSP(gus, MIXCNTRLREG)));
- printk(" -S- IRQ status = 0x%x\n", inb(GUSP(gus, IRQSTAT)));
- printk(" -S- timer control = 0x%x\n", inb(GUSP(gus, TIMERCNTRL)));
- printk(" -S- timer data = 0x%x\n", inb(GUSP(gus, TIMERDATA)));
- printk(" -S- status read = 0x%x\n", inb(GUSP(gus, REGCNTRLS)));
- printk(" -S- Sound Blaster control = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_SOUND_BLASTER_CONTROL));
- printk(" -S- AdLib timer 1/2 = 0x%x/0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_ADLIB_TIMER_1), snd_gf1_i_look8(gus, SNDRV_GF1_GB_ADLIB_TIMER_2));
- printk(" -S- reset = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_RESET));
+ printk(KERN_INFO " -S- mix control = 0x%x\n", inb(GUSP(gus, MIXCNTRLREG)));
+ printk(KERN_INFO " -S- IRQ status = 0x%x\n", inb(GUSP(gus, IRQSTAT)));
+ printk(KERN_INFO " -S- timer control = 0x%x\n", inb(GUSP(gus, TIMERCNTRL)));
+ printk(KERN_INFO " -S- timer data = 0x%x\n", inb(GUSP(gus, TIMERDATA)));
+ printk(KERN_INFO " -S- status read = 0x%x\n", inb(GUSP(gus, REGCNTRLS)));
+ printk(KERN_INFO " -S- Sound Blaster control = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_SOUND_BLASTER_CONTROL));
+ printk(KERN_INFO " -S- AdLib timer 1/2 = 0x%x/0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_ADLIB_TIMER_1), snd_gf1_i_look8(gus, SNDRV_GF1_GB_ADLIB_TIMER_2));
+ printk(KERN_INFO " -S- reset = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_RESET));
if (gus->interwave) {
- printk(" -S- compatibility = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_COMPATIBILITY));
- printk(" -S- decode control = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_DECODE_CONTROL));
- printk(" -S- version number = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_VERSION_NUMBER));
- printk(" -S- MPU-401 emul. control A/B = 0x%x/0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_MPU401_CONTROL_A), snd_gf1_i_look8(gus, SNDRV_GF1_GB_MPU401_CONTROL_B));
- printk(" -S- emulation IRQ = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_EMULATION_IRQ));
+ printk(KERN_INFO " -S- compatibility = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_COMPATIBILITY));
+ printk(KERN_INFO " -S- decode control = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_DECODE_CONTROL));
+ printk(KERN_INFO " -S- version number = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_VERSION_NUMBER));
+ printk(KERN_INFO " -S- MPU-401 emul. control A/B = 0x%x/0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_MPU401_CONTROL_A), snd_gf1_i_look8(gus, SNDRV_GF1_GB_MPU401_CONTROL_B));
+ printk(KERN_INFO " -S- emulation IRQ = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_EMULATION_IRQ));
}
}
snd_gf1_poke(gus, 0L, 0xaa);
snd_gf1_poke(gus, 1L, 0x55);
if (snd_gf1_peek(gus, 0L) != 0xaa || snd_gf1_peek(gus, 1L) != 0x55) {
- snd_printk("plain GF1 card at 0x%lx without onboard DRAM?\n", gus->gf1.port);
+ snd_printk(KERN_ERR "plain GF1 card at 0x%lx without onboard DRAM?\n", gus->gf1.port);
return -ENOMEM;
}
for (idx = 1, d = 0xab; idx < 4; idx++, d++) {
dma2 = gus->gf1.dma2;
dma2 = dma2 < 0 ? -dma2 : dma2;
dma2 = dmas[dma2 & 7];
-#if 0
- printk("dma1 = %i, dma2 = %i\n", gus->gf1.dma1, gus->gf1.dma2);
-#endif
dma1 |= gus->equal_dma ? 0x40 : (dma2 << 3);
if ((dma1 & 7) == 0 || (dma2 & 7) == 0) {
- snd_printk("Error! DMA isn't defined.\n");
+ snd_printk(KERN_ERR "Error! DMA isn't defined.\n");
return -EINVAL;
}
irq = gus->gf1.irq;
irq = irq < 0 ? -irq : irq;
irq = irqs[irq & 0x0f];
if (irq == 0) {
- snd_printk("Error! IRQ isn't defined.\n");
+ snd_printk(KERN_ERR "Error! IRQ isn't defined.\n");
return -EINVAL;
}
irq |= 0x40;
strcpy(card->longname, "Gravis UltraSound Extreme");
gus->ess_flag = 1;
} else {
- snd_printk("unknown GF1 revision number at 0x%lx - 0x%x (0x%x)\n", gus->gf1.port, rev, val);
- snd_printk(" please - report to <perex@suse.cz>\n");
+ snd_printk(KERN_ERR "unknown GF1 revision number at 0x%lx - 0x%x (0x%x)\n", gus->gf1.port, rev, val);
+ snd_printk(
KERN_ERR " please - report to <perex@suse.cz>\n");
}
}
}
if (!gus->interwave) {
if ((err = snd_gus_check_version(gus)) < 0) {
- snd_printk("version check failed\n");
+ snd_printk(KERN_ERR "version check failed\n");
return err;
}
if ((err = snd_gus_detect_memory(gus)) < 0)
if (nblock != NULL) {
if (size != (int)nblock->size) {
/* TODO: remove in the future */
- snd_printk("snd_gf1_mem_alloc - share: sizes differ\n");
+ snd_printk(KERN_ERR "snd_gf1_mem_alloc - share: sizes differ\n");
goto __std;
}
nblock->share++;
gus_pcm_private_t *pcmp = runtime->private_data;
if (!wait_event_timeout(pcmp->sleep, (atomic_read(&pcmp->dma_count) <= 0), 2*HZ))
- snd_printk("gf1 pcm - serious DMA problem\n");
+ snd_printk(KERN_ERR "gf1 pcm - serious DMA problem\n");
snd_gf1_dma_done(gus);
return 0;
spin_lock_irqsave(&gus->reg_lock, flags);
snd_gf1_select_voice(gus, voice);
#if 0
- printk(" -%i- smart stop voice - volume = 0x%x\n", voice, snd_gf1_i_read16(gus, SNDRV_GF1_VW_VOLUME));
+ printk(KERN_DEBUG " -%i- smart stop voice - volume = 0x%x\n", voice, snd_gf1_i_read16(gus, SNDRV_GF1_VW_VOLUME));
#endif
snd_gf1_ctrl_stop(gus, SNDRV_GF1_VB_ADDRESS_CONTROL);
snd_gf1_ctrl_stop(gus, SNDRV_GF1_VB_VOLUME_CONTROL);
spin_lock_irqsave(&gus->reg_lock, flags);
snd_gf1_select_voice(gus, voice);
#if 0
- printk(" -%i- stop voice - volume = 0x%x\n", voice, snd_gf1_i_read16(gus, SNDRV_GF1_VW_VOLUME));
+ printk(KERN_DEBUG " -%i- stop voice - volume = 0x%x\n", voice, snd_gf1_i_read16(gus, SNDRV_GF1_VW_VOLUME));
#endif
snd_gf1_ctrl_stop(gus, SNDRV_GF1_VB_ADDRESS_CONTROL);
snd_gf1_ctrl_stop(gus, SNDRV_GF1_VB_VOLUME_CONTROL);
snd_gf1_select_voice(gus, voice->number);
snd_gf1_ctrl_stop(gus, SNDRV_GF1_VB_VOLUME_CONTROL);
snd_gf1_write16(gus, SNDRV_GF1_VW_VOLUME, voice->gf1_volume);
- printk("gf1_volume = 0x%x\n", voice->gf1_volume);
+ /* printk("gf1_volume = 0x%x\n", voice->gf1_volume); */
spin_unlock_irqrestore(&gus->reg_lock, flags);
return;
}
gus->midi_substream_output = substream;
spin_unlock_irqrestore(&gus->uart_cmd_lock, flags);
#if 0
- snd_printk("write init - cmd = 0x%x, stat = 0x%x\n", gus->gf1.uart_cmd, snd_gf1_uart_stat(gus));
+ snd_printk(KERN_DEBUG "write init - cmd = 0x%x, stat = 0x%x\n", gus->gf1.uart_cmd, snd_gf1_uart_stat(gus));
#endif
return 0;
}
for (i = 0; i < 1000 && (snd_gf1_uart_stat(gus) & 0x01); i++)
snd_gf1_uart_get(gus); /* clean Rx */
if (i >= 1000)
- snd_printk("gus midi uart init read - cleanup error\n");
+ snd_printk(KERN_ERR "gus midi uart init read - cleanup error\n");
}
spin_unlock_irqrestore(&gus->uart_cmd_lock, flags);
#if 0
freq16 = 50;
if (freq16 & 0xf8000000) {
freq16 = ~0xf8000000;
- snd_printk("snd_gf1_translate_freq: overflow - freq = 0x%x\n", freq16);
+ snd_printk(KERN_ERR "snd_gf1_translate_freq: overflow - freq = 0x%x\n", freq16);
}
return ((freq16 << 9) + (gus->gf1.playback_freq >> 1)) / gus->gf1.playback_freq;
}
fc = (freq << 10) / rate;
if (fc > 97391L) {
fc = 97391;
- snd_printk("patch: (1) fc frequency overflow - %u\n", fc);
+ snd_printk(KERN_ERR "patch: (1) fc frequency overflow - %u\n", fc);
}
fc = (fc * 44100UL) / mix_rate;
while (scale--)
fc <<= 1;
if (fc > 65535L) {
fc = 65535;
- snd_printk("patch: (2) fc frequency overflow - %u\n", fc);
+ snd_printk(KERN_ERR "patch: (2) fc frequency overflow - %u\n", fc);
}
return (unsigned short) fc;
}
for (i = 0; i < 8; ++i)
iwave[i] = snd_gf1_peek(gus, bank_pos + i);
#ifdef CONFIG_SND_DEBUG_ROM
- printk("ROM at 0x%06x = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", bank_pos,
+ printk(KERN_DEBUG "ROM at 0x%06x = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", bank_pos,
iwave[0], iwave[1], iwave[2], iwave[3],
iwave[4], iwave[5], iwave[6], iwave[7]);
#endif
for (i = 0; i < sizeof(struct rom_hdr); i++)
csum += snd_gf1_peek(gus, bank_pos + i);
#ifdef CONFIG_SND_DEBUG_ROM
- printk("ROM checksum = 0x%x (computed)\n", csum);
+ printk(KERN_DEBUG "ROM checksum = 0x%x (computed)\n", csum);
#endif
if (csum != 0)
continue; /* not valid rom */
emu->num_ports = hw->seq_ports;
if (hw->memhdr) {
- snd_printk("memhdr is already initialized!?\n");
+ snd_printk(KERN_ERR "memhdr is already initialized!?\n");
snd_util_memhdr_free(hw->memhdr);
}
hw->memhdr = snd_util_memhdr_new(hw->mem_size);
unsigned char realirq, realdma, realmpureg;
/* note: mpu register should be present only on SB16 Vibra soundcards */
- // printk("codec->irq=%i, codec->dma8=%i, codec->dma16=%i\n", chip->irq, chip->dma8, chip->dma16);
+ // printk(KERN_DEBUG "codec->irq=%i, codec->dma8=%i, codec->dma16=%i\n", chip->irq, chip->dma8, chip->dma16);
spin_lock_irqsave(&chip->mixer_lock, flags);
mpureg = snd_sbmixer_read(chip, SB_DSP4_MPUSETUP) & ~0x06;
spin_unlock_irqrestore(&chip->mixer_lock, flags);
spin_unlock_irqrestore(&chip->mixer_lock, flags);
if ((~realirq) & irqreg || (~realdma) & dmareg) {
- snd_printk("SB16 [0x%lx]: unable to set DMA & IRQ (PnP device?)\n", chip->port);
- snd_printk("SB16 [0x%lx]: wanted: irqreg=0x%x, dmareg=0x%x, mpureg = 0x%x\n", chip->port, realirq, realdma, realmpureg);
- snd_printk("SB16 [0x%lx]: got: irqreg=0x%x, dmareg=0x%x, mpureg = 0x%x\n", chip->port, irqreg, dmareg, mpureg);
+ snd_printk(KERN_ERR "SB16 [0x%lx]: unable to set DMA & IRQ (PnP device?)\n", chip->port);
+ snd_printk(KERN_ERR "SB16 [0x%lx]: wanted: irqreg=0x%x, dmareg=0x%x, mpureg = 0x%x\n", chip->port, realirq, realdma, realmpureg);
+ snd_printk(KERN_ERR "SB16 [0x%lx]: got: irqreg=0x%x, dmareg=0x%x, mpureg = 0x%x\n", chip->port, irqreg, dmareg, mpureg);
return -ENODEV;
}
return 0;
snd_pcm_substream_t *substream;
snd_pcm_runtime_t *runtime;
-#if 0
- snd_printk("sb8: interrupt\n");
-#endif
snd_sb_ack_8bit(chip);
switch (chip->mode) {
case SB_MODE_PLAYBACK_8: /* ok.. playback is active */
{
int i;
#ifdef IO_DEBUG
- snd_printk("command 0x%x\n", val);
+ snd_printk(KERN_DEBUG "command 0x%x\n", val);
#endif
for (i = BUSY_LOOPS; i; i--)
if ((inb(SBP(chip, STATUS)) & 0x80) == 0) {
if (inb(SBP(chip, DATA_AVAIL)) & 0x80) {
val = inb(SBP(chip, READ));
#ifdef IO_DEBUG
- snd_printk("get_byte 0x%x\n", val);
+ snd_printk(KERN_DEBUG "get_byte 0x%x\n", val);
#endif
return val;
}
str = "16";
break;
default:
- snd_printk("SB [0x%lx]: unknown DSP chip version %i.%i\n",
+ snd_printk(KERN_INFO "SB [0x%lx]: unknown DSP chip version %i.%i\n",
chip->port, major, minor);
return -ENODEV;
}
outb(data, SBP(chip, MIXER_DATA));
udelay(10);
#ifdef IO_DEBUG
- snd_printk("mixer_write 0x%x 0x%x\n", reg, data);
+ snd_printk(KERN_DEBUG "mixer_write 0x%x 0x%x\n", reg, data);
#endif
}
result = inb(SBP(chip, MIXER_DATA));
udelay(10);
#ifdef IO_DEBUG
- snd_printk("mixer_read 0x%x 0x%x\n", reg, result);
+ snd_printk(KERN_DEBUG "mixer_read 0x%x 0x%x\n", reg, result);
#endif
return result;
}
schedule_timeout(1);
}
} while (time_after_eq(end_time, jiffies));
- snd_printk("ali_stimer_read: stimer is not ready.\n");
+ snd_printk(KERN_ERR "ali_stimer_read: stimer is not ready.\n");
return -EIO;
}
unsigned int port = 0;
if (reg >= 0x80) {
- snd_printk("ali_codec_poke: reg(%xh) invalid.\n", reg);
+ snd_printk(KERN_ERR "ali_codec_poke: reg(%xh) invalid.\n", reg);
return;
}
unsigned int port = 0;
if (reg >= 0x80) {
- snd_printk("ali_codec_peek: reg(%xh) invalid.\n", reg);
+ snd_printk(KERN_ERR "ali_codec_peek: reg(%xh) invalid.\n", reg);
return ~0;
}
unsigned int idx = channel & 0x1f;
if (codec->synth.chcnt >= ALI_CHANNELS){
- snd_printk("ali_alloc_pcm_channel: no free channels.\n");
+ snd_printk(KERN_ERR "ali_alloc_pcm_channel: no free channels.\n");
return -1;
}
if ((result = snd_ali_alloc_pcm_channel(codec,idx)) >= 0) {
return result;
} else {
- snd_printk("ali_find_free_channel: record channel is busy now.\n");
+ snd_printk(KERN_ERR "ali_find_free_channel: record channel is busy now.\n");
return -1;
}
}
if ((result = snd_ali_alloc_pcm_channel(codec,idx)) >= 0) {
return result;
} else {
- snd_printk("ali_find_free_channel: S/PDIF out channel is in busy now.\n");
+ snd_printk(KERN_ERR "ali_find_free_channel: S/PDIF out channel is in busy now.\n");
}
}
if ((result = snd_ali_alloc_pcm_channel(codec,idx)) >= 0)
return result;
}
- snd_printk("ali_find_free_channel: no free channels.\n");
+ snd_printk(KERN_ERR "ali_find_free_channel: no free channels.\n");
return -1;
}
return;
if (!(codec->synth.chmap & (1 << idx))) {
- snd_printk("ali_free_channel_pcm: channel %d is not in use.\n",channel);
+ snd_printk(KERN_ERR "ali_free_channel_pcm: channel %d is not in use.\n",channel);
return;
} else {
codec->synth.chmap &= ~(1 << idx);
}
if (count > 50000) {
- snd_printk("ali_detect_spdif_rate: timeout!\n");
+ snd_printk(KERN_ERR "ali_detect_spdif_rate: timeout!\n");
return;
}
}
if (count > 50000) {
- snd_printk("ali_detect_spdif_rate: timeout!\n");
+ snd_printk(KERN_ERR "ali_detect_spdif_rate: timeout!\n");
return;
}
idx = channel > 0 ? snd_ali_alloc_pcm_channel(codec, channel) :
snd_ali_find_free_channel(codec,rec);
if(idx < 0) {
- snd_printk("ali_alloc_voice: err.\n");
+ snd_printk(KERN_ERR "ali_alloc_voice: err.\n");
spin_unlock_irqrestore(&codec->voice_alloc, flags);
return NULL;
}
}
rate = snd_ali_get_spdif_in_rate(codec);
if (rate == 0) {
- snd_printk("ali_capture_preapre: spdif rate detect err!\n");
+ snd_printk(KERN_WARNING "ali_capture_preapre: spdif rate detect err!\n");
rate = 48000;
}
bValue = inb(ALI_REG(codec,ALI_SPDIF_CTRL));
if (bValue & 0x10) {
outb(bValue,ALI_REG(codec,ALI_SPDIF_CTRL));
- printk("clear SPDIF parity error flag.\n");
+ printk(KERN_WARNING "clear SPDIF parity error flag.\n");
}
if (rate != 48000)
err = snd_pcm_new(codec->card, desc->name, device,
desc->playback_num, desc->capture_num, &pcm);
if (err < 0) {
- snd_printk("snd_ali_pcm: err called snd_pcm_new.\n");
+ snd_printk(KERN_ERR "snd_ali_pcm: err called snd_pcm_new.\n");
return err;
}
pcm->private_data = codec;
for ( i = 0 ; i < codec->num_of_codecs ; i++) {
ac97.num = i;
if ((err = snd_ac97_mixer(codec->ac97_bus, &ac97, &codec->ac97[i])) < 0) {
- snd_printk("ali mixer %d creating error.\n", i);
+ snd_printk(KERN_ERR "ali mixer %d creating error.\n", i);
if(i == 0)
return err;
codec->num_of_codecs = 1;
snd_ali_printk("chip initializing ... \n");
if (snd_ali_reset_5451(codec)) {
- snd_printk("ali_chip_init: reset 5451 error.\n");
+ snd_printk(KERN_ERR "ali_chip_init: reset 5451 error.\n");
return -1;
}
codec->port = pci_resource_start(codec->pci, 0);
if (request_irq(codec->pci->irq, snd_ali_card_interrupt, SA_INTERRUPT|SA_SHIRQ, "ALI 5451", (void *)codec)) {
- snd_printk("Unable to request irq.\n");
+ snd_printk(KERN_ERR "Unable to request irq.\n");
return -EBUSY;
}
codec->irq = codec->pci->irq;
/* check, if we can restrict PCI DMA transfers to 31 bits */
if (pci_set_dma_mask(pci, 0x7fffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x7fffffff) < 0) {
- snd_printk("architecture does not support 31bit PCI busmaster DMA\n");
+ snd_printk(KERN_ERR "architecture does not support 31bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
}
}
if ((err = snd_ali_chip_init(codec)) < 0) {
- snd_printk("ali create: chip init error.\n");
+ snd_printk(KERN_ERR "ali create: chip init error.\n");
return err;
}
/* check, if we can restrict PCI DMA transfers to 24 bits */
if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
- snd_printk("architecture does not support 24bit PCI busmaster DMA\n");
+ snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
}
if (snd_seq_device_new(card, 1, SNDRV_SEQ_DEV_ID_VORTEX_SYNTH,
sizeof(snd_vortex_synth_arg_t), &wave) < 0
|| wave == NULL) {
- snd_printk("Can't initialize Aureal wavetable synth\n");
+ snd_printk(KERN_ERR "Can't initialize Aureal wavetable synth\n");
} else {
snd_vortex_synth_arg_t *arg;
int i, var, var2;
if ((a->vortex) == NULL) {
- printk("vortex: ZeroStateA3D: ERROR: a->vortex is NULL\n");
+ printk(KERN_ERR "vortex: ZeroStateA3D: ERROR: a->vortex is NULL\n");
return;
}
}
}
}
- printk("vortex: FATAL: ResManager: resource type %d exhausted.\n", restype);
+ printk(KERN_ERR "vortex: FATAL: ResManager: resource type %d exhausted.\n", restype);
return -ENOMEM;
}
memset(stream->resources, 0,
sizeof(unsigned char) *
VORTEX_RESOURCE_LAST);
- printk("vortex: out of A3D sources. Sorry\n");
+ printk(KERN_ERR "vortex: out of A3D sources. Sorry\n");
return -EBUSY;
}
/* (De)Initialize A3D hardware source. */
vortex_Eqlzr_GetAllPeaks(vortex, peaks, &count);
if (count != 20) {
- printk("vortex: peak count error 20 != %d \n", count);
+ printk(KERN_ERR "vortex: peak count error 20 != %d \n", count);
return -1;
}
for (i = 0; i < 20; i++)
hwwrite(vortex->mmio, WT_PARM(wt, 2), 0);
temp = hwread(vortex->mmio, WT_PARM(wt, 3));
- printk("vortex: WT PARM3: %x\n", temp);
+ printk(KERN_DEBUG "vortex: WT PARM3: %x\n", temp);
//hwwrite(vortex->mmio, WT_PARM(wt, 3), temp);
hwwrite(vortex->mmio, WT_DELAY(wt, 0), 0);
hwwrite(vortex->mmio, WT_DELAY(wt, 2), 0);
hwwrite(vortex->mmio, WT_DELAY(wt, 3), 0);
- printk("vortex: WT GMODE: %x\n", hwread(vortex->mmio, WT_GMODE(wt)));
+ printk(KERN_DEBUG "vortex: WT GMODE: %x\n", hwread(vortex->mmio, WT_GMODE(wt)));
hwwrite(vortex->mmio, WT_PARM(wt, 2), 0xffffffff);
hwwrite(vortex->mmio, WT_PARM(wt, 3), 0xcff1c810);
voice->parm0 = voice->parm1 = 0xcfb23e2f;
hwwrite(vortex->mmio, WT_PARM(wt, 0), voice->parm0);
hwwrite(vortex->mmio, WT_PARM(wt, 1), voice->parm1);
- printk("vortex: WT GMODE 2 : %x\n", hwread(vortex->mmio, WT_GMODE(wt)));
+ printk(KERN_DEBUG "vortex: WT GMODE 2 : %x\n", hwread(vortex->mmio, WT_GMODE(wt)));
return 0;
}
}
} else {
if (wt >= NR_WT) {
- printk("vortex: WT SetReg: voice out of range\n");
+ printk(KERN_ERR "vortex: WT SetReg: voice out of range\n");
return 0;
}
}
case 48000: val |= 0x06; break;
case 64000: val |= 0x07; break;
default:
- snd_printk("unknown bitrate %d, assuming 44.1kHz!\n", bitrate);
+ snd_printk(KERN_WARNING "unknown bitrate %d, assuming 44.1kHz!\n", bitrate);
val |= 0x05; /* 44100 */
break;
}
chip->is_playing = 0;
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- snd_printk("FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n");
+ snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n");
break;
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- snd_printk("FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n");
+ snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n");
break;
default:
return -EINVAL;
chip->is_playing = 0;
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- snd_printk("FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n");
+ snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n");
break;
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- snd_printk("FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n");
+ snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n");
break;
default:
return -EINVAL;
/* check if we can restrict PCI DMA transfers to 24 bits */
if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
- snd_printk("architecture does not support 24bit PCI busmaster DMA\n");
+ snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
}
chip->mixer_port = pci_resource_start(pci, 4);
if (request_irq(pci->irq, snd_azf3328_interrupt, SA_INTERRUPT|SA_SHIRQ, card->shortname, (void *)chip)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_azf3328_free(chip);
return -EBUSY;
}
if ((err = snd_mpu401_uart_new( card, 0, MPU401_HW_MPU401,
chip->mpu_port, 1, pci->irq, 0,
&chip->rmidi)) < 0) {
- snd_printk("azf3328: no MPU-401 device at 0x%lx?\n", chip->mpu_port);
+ snd_printk(KERN_ERR "azf3328: no MPU-401 device at 0x%lx?\n", chip->mpu_port);
snd_card_free(card);
return err;
}
if (snd_opl3_create(card, chip->synth_port, chip->synth_port+2,
OPL3_HW_AUTO, 1, &opl3) < 0) {
- snd_printk("azf3328: no OPL3 device at 0x%lx-0x%lx?\n",
+ snd_printk(KERN_ERR "azf3328: no OPL3 device at 0x%lx-0x%lx?\n",
chip->synth_port, chip->synth_port+2 );
} else {
if ((err = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0) {
int retry;
if ((reg > 0x7f) || (value > 0x1ff))
{
- snd_printk("i2c_write: invalid values.\n");
+ snd_printk(KERN_ERR "i2c_write: invalid values.\n");
return -EINVAL;
}
if(retry==10)
{
- snd_printk("Writing to ADC failed!\n");
+ snd_printk(KERN_ERR "Writing to ADC failed!\n");
return -EINVAL;
}
epcm = kzalloc(sizeof(*epcm), GFP_KERNEL);
if (epcm == NULL) {
- snd_printk("open_capture_channel: failed epcm alloc\n");
+ snd_printk(KERN_ERR "open_capture_channel: failed epcm alloc\n");
return -ENOMEM;
}
epcm->emu = chip;
cm->iobase = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_cmipci_interrupt, SA_INTERRUPT|SA_SHIRQ, card->driver, (void *)cm)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_cmipci_free(cm);
return -EBUSY;
}
goto ok1;
}
- snd_printk("AC'97 read problem (ACCTL_DCV), reg = 0x%x\n", reg);
+ snd_printk(KERN_ERR "AC'97 read problem (ACCTL_DCV), reg = 0x%x\n", reg);
result = 0xffff;
goto end;
udelay(10);
}
- snd_printk("AC'97 read problem (ACSTS_VSTS), codec_index %d, reg = 0x%x\n", codec_index, reg);
+ snd_printk(KERN_ERR "AC'97 read problem (ACSTS_VSTS), codec_index %d, reg = 0x%x\n", codec_index, reg);
result = 0xffff;
goto end;
goto end;
}
}
- snd_printk("AC'97 write problem, codec_index = %d, reg = 0x%x, val = 0x%x\n", codec_index, reg, val);
+ snd_printk(KERN_ERR "AC'97 write problem, codec_index = %d, reg = 0x%x, val = 0x%x\n", codec_index, reg, val);
end:
chip->active_ctrl(chip, -1);
}
}
if (snd_cs46xx_peek(chip, BA1_SPCR) & SPCR_RUNFR)
- snd_printk("SPCR_RUNFR never reset\n");
+ snd_printk(KERN_ERR "SPCR_RUNFR never reset\n");
}
static void snd_cs46xx_proc_stop(cs46xx_t *chip)
msleep(10);
} while (time_after_eq(end_time, jiffies));
- snd_printk("CS46xx secondary codec dont respond!\n");
+ snd_printk(KERN_ERR "CS46xx secondary codec doesn't respond!\n");
}
#endif
}
- snd_printk("create - never read codec ready from AC'97\n");
- snd_printk("it is not probably bug, try to use CS4236 driver\n");
+ snd_printk(KERN_ERR "create - never read codec ready from AC'97\n");
+ snd_printk(KERN_ERR "it is not probably bug, try to use CS4236 driver\n");
return -EIO;
ok1:
#ifdef CONFIG_SND_CS46XX_NEW_DSP
}
#ifndef CONFIG_SND_CS46XX_NEW_DSP
- snd_printk("create - never read ISV3 & ISV4 from AC'97\n");
+ snd_printk(KERN_ERR "create - never read ISV3 & ISV4 from AC'97\n");
return -EIO;
#else
/* This may happen on a cold boot with a Terratec SiXPack 5.1.
Reloading the driver may help, if there's other soundcards
with the same problem I would like to know. (Benny) */
- snd_printk("ERROR: snd-cs46xx: never read ISV3 & ISV4 from AC'97\n");
- snd_printk(" Try reloading the ALSA driver, if you find something\n");
- snd_printk(" broken or not working on your soundcard upon\n");
- snd_printk(" this message please report to alsa-devel@lists.sourceforge.net\n");
+ snd_printk(KERN_ERR "ERROR: snd-cs46xx: never read ISV3 & ISV4 from AC'97\n");
+ snd_printk(KERN_ERR " Try reloading the ALSA driver, if you find something\n");
+ snd_printk(KERN_ERR " broken or not working on your soundcard upon\n");
+ snd_printk(KERN_ERR " this message please report to alsa-devel@lists.sourceforge.net\n");
return -EIO;
#endif
#else
/* old image */
if (snd_cs46xx_download_image(chip) < 0) {
- snd_printk("image download error\n");
+ snd_printk(KERN_ERR "image download error\n");
return -EIO;
}
chip->ba1_addr = pci_resource_start(pci, 1);
if (chip->ba0_addr == 0 || chip->ba0_addr == (unsigned long)~0 ||
chip->ba1_addr == 0 || chip->ba1_addr == (unsigned long)~0) {
- snd_printk("wrong address(es) - ba0 = 0x%lx, ba1 = 0x%lx\n", chip->ba0_addr, chip->ba1_addr);
+ snd_printk(KERN_ERR "wrong address(es) - ba0 = 0x%lx, ba1 = 0x%lx\n", chip->ba0_addr, chip->ba1_addr);
snd_cs46xx_free(chip);
return -ENOMEM;
}
}
if (external_amp) {
- snd_printk("Crystal EAPD support forced on.\n");
+ snd_printk(KERN_INFO "Crystal EAPD support forced on.\n");
chip->amplifier_ctrl = amp_voyetra;
}
if (thinkpad) {
- snd_printk("Activating CLKRUN hack for Thinkpad.\n");
+ snd_printk(KERN_INFO "Activating CLKRUN hack for Thinkpad.\n");
chip->active_ctrl = clkrun_hack;
clkrun_init(chip);
}
for (idx = 0; idx < 5; idx++) {
region = &chip->region.idx[idx];
if ((region->resource = request_mem_region(region->base, region->size, region->name)) == NULL) {
- snd_printk("unable to request memory region 0x%lx-0x%lx\n", region->base, region->base + region->size - 1);
+ snd_printk(KERN_ERR "unable to request memory region 0x%lx-0x%lx\n", region->base, region->base + region->size - 1);
snd_cs46xx_free(chip);
return -EBUSY;
}
region->remap_addr = ioremap_nocache(region->base, region->size);
if (region->remap_addr == NULL) {
- snd_printk("%s ioremap problem\n", region->name);
+ snd_printk(KERN_ERR "%s ioremap problem\n", region->name);
snd_cs46xx_free(chip);
return -ENOMEM;
}
}
if (request_irq(pci->irq, snd_cs46xx_interrupt, SA_INTERRUPT|SA_SHIRQ, "CS46XX", (void *) chip)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_cs46xx_free(chip);
return -EBUSY;
}
if (snd_seq_device_new(card, 1, SNDRV_SEQ_DEV_ID_EMU10K1_SYNTH,
sizeof(snd_emu10k1_synth_arg_t), &wave) < 0 ||
wave == NULL) {
- snd_printk("can't initialize Emu10k1 wavetable synth\n");
+ snd_printk(KERN_WARNING "can't initialize Emu10k1 wavetable synth\n");
} else {
snd_emu10k1_synth_arg_t *arg;
arg = SNDRV_SEQ_DEVICE_ARGPTR(wave);
A_SWITCH(icode, &ptr, tmp + 1, playback + SND_EMU10K1_PLAYBACK_CHANNELS + z, tmp + 1);
if ((z==1) && (emu->card_capabilities->spdif_bug)) {
/* Due to a SPDIF output bug on some Audigy cards, this code delays the Right channel by 1 sample */
- snd_printk("Installing spdif_bug patch: %s\n", emu->card_capabilities->name);
+ snd_printk(KERN_INFO "Installing spdif_bug patch: %s\n", emu->card_capabilities->name);
A_OP(icode, &ptr, iACC3, A_EXTOUT(A_EXTOUT_FRONT_L + z), A_GPR(gpr - 3), A_C_00000000, A_C_00000000);
A_OP(icode, &ptr, iACC3, A_GPR(gpr - 3), A_GPR(tmp + 0), A_GPR(tmp + 1), A_C_00000000);
} else {
orig_status = status;
handled = 1;
if (status & IPR_PCIERROR) {
- snd_printk("interrupt: PCI error\n");
+ snd_printk(KERN_ERR "interrupt: PCI error\n");
snd_emu10k1_intr_disable(emu, INTE_PCIERRORENABLE);
status &= ~IPR_PCIERROR;
}
static int is_valid_page(emu10k1_t *emu, dma_addr_t addr)
{
if (addr & ~emu->dma_mask) {
- snd_printk("max memory size is 0x%lx (addr = 0x%lx)!!\n", emu->dma_mask, (unsigned long)addr);
+ snd_printk(KERN_ERR "max memory size is 0x%lx (addr = 0x%lx)!!\n", emu->dma_mask, (unsigned long)addr);
return 0;
}
if (addr & (EMUPAGESIZE-1)) {
- snd_printk("page is not aligned\n");
+ snd_printk(KERN_ERR "page is not aligned\n");
return 0;
}
return 1;
snd_assert(page >= 0 && page < emu->max_cache_pages, return NULL);
ptr = emu->page_ptr_table[page];
if (! ptr) {
- printk("emu10k1: access to NULL ptr: page = %d\n", page);
+ printk(KERN_ERR "emu10k1: access to NULL ptr: page = %d\n", page);
return NULL;
}
ptr += offset & (PAGE_SIZE - 1);
ptr=ptr2;
if (ptr >= runtime->buffer_size) {
ptr -= runtime->buffer_size;
- printk("buffer capture limited!\n");
+ printk(KERN_WARNING "buffer capture limited!\n");
}
//printk("ptr1 = 0x%lx, ptr2=0x%lx, ptr=0x%lx, buffer_size = 0x%x, period_size = 0x%x, bits=%d, rate=%d\n", ptr1, ptr2, ptr, (int)runtime->buffer_size, (int)runtime->period_size, (int)runtime->frame_bits, (int)runtime->rate);
return r;
cond_resched();
}
- snd_printk("wait source ready timeout 0x%lx [0x%x]\n", ES_REG(ensoniq, 1371_SMPRATE), r);
+ snd_printk(KERN_ERR "wait source ready timeout 0x%lx [0x%x]\n", ES_REG(ensoniq, 1371_SMPRATE), r);
return 0;
}
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(1);
} while (time_after(end_time, jiffies));
- snd_printk("codec write timeout, status = 0x%x\n", inl(ES_REG(ensoniq, STATUS)));
+ snd_printk(KERN_ERR "codec write timeout, status = 0x%x\n", inl(ES_REG(ensoniq, STATUS)));
}
#endif /* CHIP1370 */
}
}
up(&ensoniq->src_mutex);
- snd_printk("codec write timeout at 0x%lx [0x%x]\n", ES_REG(ensoniq, 1371_CODEC), inl(ES_REG(ensoniq, 1371_CODEC)));
+ snd_printk(KERN_ERR "codec write timeout at 0x%lx [0x%x]\n", ES_REG(ensoniq, 1371_CODEC), inl(ES_REG(ensoniq, 1371_CODEC)));
}
static unsigned short snd_es1371_codec_read(ac97_t *ac97,
}
up(&ensoniq->src_mutex);
if (++fail > 10) {
- snd_printk("codec read timeout (final) at 0x%lx, reg = 0x%x [0x%x]\n", ES_REG(ensoniq, 1371_CODEC), reg, inl(ES_REG(ensoniq, 1371_CODEC)));
+ snd_printk(KERN_ERR "codec read timeout (final) at 0x%lx, reg = 0x%x [0x%x]\n", ES_REG(ensoniq, 1371_CODEC), reg, inl(ES_REG(ensoniq, 1371_CODEC)));
return 0;
}
goto __again;
}
}
up(&ensoniq->src_mutex);
- snd_printk("es1371: codec read timeout at 0x%lx [0x%x]\n", ES_REG(ensoniq, 1371_CODEC), inl(ES_REG(ensoniq, 1371_CODEC)));
+ snd_printk(KERN_ERR "es1371: codec read timeout at 0x%lx [0x%x]\n", ES_REG(ensoniq, 1371_CODEC), inl(ES_REG(ensoniq, 1371_CODEC)));
return 0;
}
}
ensoniq->port = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_audiopci_interrupt, SA_INTERRUPT|SA_SHIRQ, "Ensoniq AudioPCI", (void *)ensoniq)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_ensoniq_free(ensoniq);
return -EBUSY;
}
#ifdef CHIP1370
if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci),
16, &ensoniq->dma_bug) < 0) {
- snd_printk("unable to allocate space for phantom area - dma_bug\n");
+ snd_printk(KERN_ERR "unable to allocate space for phantom area - dma_bug\n");
snd_ensoniq_free(ensoniq);
return -EBUSY;
}
outb(val, SLSB_REG(chip, MIXERDATA));
spin_unlock_irqrestore(&chip->mixer_lock, flags);
#ifdef REG_DEBUG
- snd_printk("Mixer reg %02x set to %02x\n", reg, val);
+ snd_printk(KERN_DEBUG "Mixer reg %02x set to %02x\n", reg, val);
#endif
}
data = inb(SLSB_REG(chip, MIXERDATA));
spin_unlock_irqrestore(&chip->mixer_lock, flags);
#ifdef REG_DEBUG
- snd_printk("Mixer reg %02x now is %02x\n", reg, data);
+ snd_printk(KERN_DEBUG "Mixer reg %02x now is %02x\n", reg, data);
#endif
return data;
}
new = (old & ~mask) | (val & mask);
outb(new, SLSB_REG(chip, MIXERDATA));
#ifdef REG_DEBUG
- snd_printk("Mixer reg %02x was %02x, set to %02x\n", reg, old, new);
+ snd_printk(KERN_DEBUG "Mixer reg %02x was %02x, set to %02x\n",
+ reg, old, new);
#endif
}
spin_unlock_irqrestore(&chip->mixer_lock, flags);
return;
}
}
- printk("snd_es1938_write_cmd timeout (0x02%x/0x02%x)\n", cmd, v);
+ printk(KERN_ERR "snd_es1938_write_cmd timeout (0x02%x/0x02%x)\n", cmd, v);
}
/* -----------------------------------------------------------------
for (i = GET_LOOP_TIMEOUT; i; i--)
if ((v = inb(SLSB_REG(chip, STATUS))) & 0x80)
return inb(SLSB_REG(chip, READDATA));
- snd_printk("get_byte timeout: status 0x02%x\n", v);
+ snd_printk(KERN_ERR "get_byte timeout: status 0x02%x\n", v);
return -ENODEV;
}
snd_es1938_write_cmd(chip, val);
spin_unlock_irqrestore(&chip->reg_lock, flags);
#ifdef REG_DEBUG
- snd_printk("Reg %02x set to %02x\n", reg, val);
+ snd_printk(KERN_DEBUG "Reg %02x set to %02x\n", reg, val);
#endif
}
val = snd_es1938_get_byte(chip);
spin_unlock_irqrestore(&chip->reg_lock, flags);
#ifdef REG_DEBUG
- snd_printk("Reg %02x now is %02x\n", reg, val);
+ snd_printk(KERN_DEBUG "Reg %02x now is %02x\n", reg, val);
#endif
return val;
}
new = (old & ~mask) | (val & mask);
snd_es1938_write_cmd(chip, new);
#ifdef REG_DEBUG
- snd_printk("Reg %02x was %02x, set to %02x\n", reg, old, new);
+ snd_printk(KERN_DEBUG "Reg %02x was %02x, set to %02x\n",
+ reg, old, new);
#endif
}
spin_unlock_irqrestore(&chip->reg_lock, flags);
goto __next;
}
}
- snd_printk("ESS Solo-1 reset failed\n");
+ snd_printk(KERN_ERR "ESS Solo-1 reset failed\n");
__next:
snd_es1938_write_cmd(chip, ESS_CMD_ENABLEEXT);
/* check, if we can restrict PCI DMA transfers to 24 bits */
if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
- snd_printk("architecture does not support 24bit PCI busmaster DMA\n");
+ snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
}
chip->mpu_port = pci_resource_start(pci, 3);
chip->game_port = pci_resource_start(pci, 4);
if (request_irq(pci->irq, snd_es1938_interrupt, SA_INTERRUPT|SA_SHIRQ, "ES1938", (void *)chip)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_es1938_free(chip);
return -EBUSY;
}
chip->irq = pci->irq;
#ifdef ES1938_DDEBUG
- snd_printk("create: io: 0x%lx, sb: 0x%lx, vc: 0x%lx, mpu: 0x%lx, game: 0x%lx\n",
+ snd_printk(KERN_DEBUG "create: io: 0x%lx, sb: 0x%lx, vc: 0x%lx, mpu: 0x%lx, game: 0x%lx\n",
chip->io_port, chip->sb_port, chip->vc_port, chip->mpu_port, chip->game_port);
#endif
snd_dma_pci_data(chip->pci),
chip->total_bufsize, &chip->dma);
if (err < 0 || ! chip->dma.area) {
- snd_printk("es1968: can't allocate dma pages for size %d\n",
+ snd_printk(KERN_ERR "es1968: can't allocate dma pages for size %d\n",
chip->total_bufsize);
return -ENOMEM;
}
if ((chip->dma.addr + chip->dma.bytes - 1) & ~((1 << 28) - 1)) {
snd_dma_free_pages(&chip->dma);
- snd_printk("es1968: DMA buffer beyond 256MB.\n");
+ snd_printk(KERN_ERR "es1968: DMA buffer beyond 256MB.\n");
return -ENOMEM;
}
}
/* search 2 APUs (although one apu is enough) */
if ((apu = snd_es1968_alloc_apu_pair(chip, ESM_APU_PCM_PLAY)) < 0) {
- snd_printk("Hmm, cannot find empty APU pair!?\n");
+ snd_printk(KERN_ERR "Hmm, cannot find empty APU pair!?\n");
return;
}
if ((memory = snd_es1968_new_memory(chip, CLOCK_MEASURE_BUFSIZE)) == NULL) {
- snd_printk("cannot allocate dma buffer - using default clock %d\n", chip->clock);
+ snd_printk(KERN_ERR "cannot allocate dma buffer - using default clock %d\n", chip->clock);
snd_es1968_free_apu_pair(chip, apu);
return;
}
else
t += stop_time.tv_usec - start_time.tv_usec;
if (t == 0) {
- snd_printk("?? calculation error..\n");
+ snd_printk(KERN_ERR "?? calculation error..\n");
} else {
offset *= 1000;
offset = (offset / t) * 1000 + ((offset % t) * 1000) / t;
outw(inw(ioaddr + 0x3c) & 0xfffc, ioaddr + 0x3c);
#if 0 /* the loop here needs to be much better if we want it.. */
- snd_printk("trying software reset\n");
+ snd_printk(KERN_INFO "trying software reset\n");
/* try and do a software reset */
outb(0x80 | 0x7c, ioaddr + 0x30);
for (w = 0;; w++) {
/* check, if we can restrict PCI DMA transfers to 28 bits */
if (pci_set_dma_mask(pci, 0x0fffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x0fffffff) < 0) {
- snd_printk("architecture does not support 28bit PCI busmaster DMA\n");
+ snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
}
chip->io_port = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_es1968_interrupt, SA_INTERRUPT|SA_SHIRQ,
"ESS Maestro", (void*)chip)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_es1968_free(chip);
return -EBUSY;
}
goto ok1;
udelay(10);
}
- snd_printk("AC'97 interface is busy (1)\n");
+ snd_printk(KERN_ERR "AC'97 interface is busy (1)\n");
return;
ok1:
return;
udelay(10);
}
- snd_printk("AC'97 interface #%d is busy (2)\n", ac97->num);
+ snd_printk(KERN_ERR "AC'97 interface #%d is busy (2)\n", ac97->num);
}
static unsigned short snd_fm801_codec_read(ac97_t *ac97, unsigned short reg)
goto ok1;
udelay(10);
}
- snd_printk("AC'97 interface is busy (1)\n");
+ snd_printk(KERN_ERR "AC'97 interface is busy (1)\n");
return 0;
ok1:
goto ok2;
udelay(10);
}
- snd_printk("AC'97 interface #%d is busy (2)\n", ac97->num);
+ snd_printk(KERN_ERR "AC'97 interface #%d is busy (2)\n", ac97->num);
return 0;
ok2:
goto ok3;
udelay(10);
}
- snd_printk("AC'97 interface #%d is not valid (2)\n", ac97->num);
+ snd_printk(KERN_ERR "AC'97 interface #%d is not valid (2)\n", ac97->num);
return 0;
ok3:
}
chip->port = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_fm801_interrupt, SA_INTERRUPT|SA_SHIRQ, "FM801", (void *)chip)) {
- snd_printk("unable to grab IRQ %d\n", chip->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", chip->irq);
snd_fm801_free(chip);
return -EBUSY;
}
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(1);
} while (time_after(timeout, jiffies));
- snd_printk("Primary AC'97 codec not found\n");
+ snd_printk(KERN_ERR "Primary AC'97 codec not found\n");
snd_fm801_free(chip);
return -EIO;
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(1);
} while (time_after(timeout, jiffies));
- snd_printk("Primary AC'97 codec not responding\n");
+ snd_printk(KERN_ERR "Primary AC'97 codec not responding\n");
snd_fm801_free(chip);
return -EIO;
snd_ice1712_save_gpio_status(ice);
id = aureon_cs8415_get(ice, CS8415_ID);
if (id != 0x41)
- snd_printk("No CS8415 chip. Skipping CS8415 controls.\n");
+ snd_printk(KERN_INFO "No CS8415 chip. Skipping CS8415 controls.\n");
else if ((id & 0x0F) != 0x01)
- snd_printk("Detected unsupported CS8415 rev. (%c)\n", (char)((id & 0x0F) + 'A' - 1));
+ snd_printk(KERN_INFO "Detected unsupported CS8415 rev. (%c)\n", (char)((id & 0x0F) + 'A' - 1));
else {
for (i = 0; i< ARRAY_SIZE(cs8415_controls); i++) {
snd_kcontrol_t *kctl;
case ICE1712_SUBDEVICE_DELTA1010LT:
case ICE1712_SUBDEVICE_VX442:
if ((err = snd_i2c_bus_create(ice->card, "ICE1712 GPIO 1", NULL, &ice->i2c)) < 0) {
- snd_printk("unable to create I2C bus\n");
+ snd_printk(KERN_ERR "unable to create I2C bus\n");
return err;
}
ice->i2c->private_data = ice;
/* create i2c */
if ((err = snd_i2c_bus_create(ice->card, "ICE1712 GPIO 1", NULL, &ice->i2c)) < 0) {
- snd_printk("unable to create I2C bus\n");
+ snd_printk(KERN_ERR "unable to create I2C bus\n");
return err;
}
ice->i2c->private_data = ice;
switch (ice->eeprom.subvendor) {
case ICE1712_SUBDEVICE_DMX6FIRE:
if ((err = snd_i2c_device_create(ice->i2c, "PCF9554", ICE1712_6FIRE_PCF9554_ADDR, &ice->spec.i2cdevs[EWS_I2C_6FIRE])) < 0) {
- snd_printk("PCF9554 initialization failed\n");
+ snd_printk(KERN_ERR "PCF9554 initialization failed\n");
return err;
}
snd_ice1712_6fire_write_pca(ice, PCF9554_REG_CONFIG, 0x80);
byte = 0;
if (snd_i2c_readbytes(ice->spec.i2cdevs[EWS_I2C_6FIRE], &byte, 1) != 1) {
snd_i2c_unlock(ice->i2c);
- printk("cannot read pca\n");
+ printk(KERN_ERR "cannot read pca\n");
return -EIO;
}
snd_i2c_unlock(ice->i2c);
if ((err = snd_cs8427_create(ice->i2c, addr,
(ice->cs8427_timeout * HZ) / 1000,
&ice->cs8427)) < 0) {
- snd_printk("CS8427 initialization failed\n");
+ snd_printk(KERN_ERR "CS8427 initialization failed\n");
return err;
}
ice->spdif.ops.open = open_cs8427;
if (ice->eeprom.size < 6)
ice->eeprom.size = 32; /* FIXME: any cards without the correct size? */
else if (ice->eeprom.size > 32) {
- snd_printk("invalid EEPROM (size = %i)\n", ice->eeprom.size);
+ snd_printk(KERN_ERR "invalid EEPROM (size = %i)\n", ice->eeprom.size);
return -EIO;
}
ice->eeprom.version = snd_ice1712_read_i2c(ice, dev, 0x05);
if (ice->eeprom.version != 1) {
- snd_printk("invalid EEPROM version %i\n", ice->eeprom.version);
+ snd_printk(KERN_ERR "invalid EEPROM version %i\n", ice->eeprom.version);
/* return -EIO; */
}
size = ice->eeprom.size - 6;
/* check, if we can restrict PCI DMA transfers to 28 bits */
if (pci_set_dma_mask(pci, 0x0fffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x0fffffff) < 0) {
- snd_printk("architecture does not support 28bit PCI busmaster DMA\n");
+ snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
}
ice->profi_port = pci_resource_start(pci, 3);
if (request_irq(pci->irq, snd_ice1712_interrupt, SA_INTERRUPT|SA_SHIRQ, "ICE1712", (void *) ice)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_ice1712_free(ice);
return -EIO;
}
ice->profi_port = pci_resource_start(pci, 1);
if (request_irq(pci->irq, snd_vt1724_interrupt, SA_INTERRUPT|SA_SHIRQ, "ICE1724", (void *) ice)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_vt1724_free(ice);
return -EIO;
}
/* access to some forbidden (non existant) ac97 registers will not
* reset the semaphore. So even if you don't get the semaphore, still
* continue the access. We don't need the semaphore anyway. */
- snd_printk("codec_semaphore: semaphore is not ready [0x%x][0x%x]\n",
+ snd_printk(KERN_ERR "codec_semaphore: semaphore is not ready [0x%x][0x%x]\n",
igetbyte(chip, ICHREG(ACC_SEMA)), igetdword(chip, ICHREG(GLOB_STA)));
iagetword(chip, 0); /* clear semaphore flag */
/* I don't care about the semaphore */
if (snd_intel8x0_codec_semaphore(chip, ac97->num) < 0) {
if (! chip->in_ac97_init)
- snd_printk("codec_write %d: semaphore is not ready for register 0x%x\n", ac97->num, reg);
+ snd_printk(KERN_ERR "codec_write %d: semaphore is not ready for register 0x%x\n", ac97->num, reg);
}
iaputword(chip, reg + ac97->num * 0x80, val);
}
if (snd_intel8x0_codec_semaphore(chip, ac97->num) < 0) {
if (! chip->in_ac97_init)
- snd_printk("codec_read %d: semaphore is not ready for register 0x%x\n", ac97->num, reg);
+ snd_printk(KERN_ERR "codec_read %d: semaphore is not ready for register 0x%x\n", ac97->num, reg);
res = 0xffff;
} else {
res = iagetword(chip, reg + ac97->num * 0x80);
/* reset RCS and preserve other R/WC bits */
iputdword(chip, ICHREG(GLOB_STA), tmp & ~(ICH_SRI|ICH_PRI|ICH_TRI|ICH_GSCI));
if (! chip->in_ac97_init)
- snd_printk("codec_read %d: read timeout for register 0x%x\n", ac97->num, reg);
+ snd_printk(KERN_ERR "codec_read %d: read timeout for register 0x%x\n", ac97->num, reg);
res = 0xffff;
}
}
goto __ok;
do_delay(chip);
} while (time_after_eq(end_time, jiffies));
- snd_printk("AC'97 warm reset still in progress? [0x%x]\n", igetdword(chip, ICHREG(GLOB_CNT)));
+ snd_printk(KERN_ERR "AC'97 warm reset still in progress? [0x%x]\n", igetdword(chip, ICHREG(GLOB_CNT)));
return -EIO;
__ok:
subs = chip->pcm[0]->streams[0].substream;
if (! subs || subs->dma_buffer.bytes < INTEL8X0_TESTBUF_SIZE) {
- snd_printk("no playback buffer allocated - aborting measure ac97 clock\n");
+ snd_printk(KERN_WARNING "no playback buffer allocated - aborting measure ac97 clock\n");
return;
}
ichdev = &chip->ichd[ICHD_PCMOUT];
chip->remap_addr = ioremap_nocache(chip->addr,
pci_resource_len(pci, 2));
if (chip->remap_addr == NULL) {
- snd_printk("AC'97 space ioremap problem\n");
+ snd_printk(KERN_ERR "AC'97 space ioremap problem\n");
snd_intel8x0_free(chip);
return -EIO;
}
chip->remap_bmaddr = ioremap_nocache(chip->bmaddr,
pci_resource_len(pci, 3));
if (chip->remap_bmaddr == NULL) {
- snd_printk("Controller space ioremap problem\n");
+ snd_printk(KERN_ERR "Controller space ioremap problem\n");
snd_intel8x0_free(chip);
return -EIO;
}
port_inited:
if (request_irq(pci->irq, snd_intel8x0_interrupt, SA_INTERRUPT|SA_SHIRQ, card->shortname, (void *)chip)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_intel8x0_free(chip);
return -EBUSY;
}
/* access to some forbidden (non existant) ac97 registers will not
* reset the semaphore. So even if you don't get the semaphore, still
* continue the access. We don't need the semaphore anyway. */
- snd_printk("codec_semaphore: semaphore is not ready [0x%x][0x%x]\n",
+ snd_printk(KERN_ERR "codec_semaphore: semaphore is not ready [0x%x][0x%x]\n",
igetbyte(chip, ICHREG(ACC_SEMA)), igetdword(chip, ICHREG(GLOB_STA)));
iagetword(chip, 0); /* clear semaphore flag */
/* I don't care about the semaphore */
if (snd_intel8x0m_codec_semaphore(chip, ac97->num) < 0) {
if (! chip->in_ac97_init)
- snd_printk("codec_write %d: semaphore is not ready for register 0x%x\n", ac97->num, reg);
+ snd_printk(KERN_ERR "codec_write %d: semaphore is not ready for register 0x%x\n", ac97->num, reg);
}
iaputword(chip, reg + ac97->num * 0x80, val);
}
if (snd_intel8x0m_codec_semaphore(chip, ac97->num) < 0) {
if (! chip->in_ac97_init)
- snd_printk("codec_read %d: semaphore is not ready for register 0x%x\n", ac97->num, reg);
+ snd_printk(KERN_ERR "codec_read %d: semaphore is not ready for register 0x%x\n", ac97->num, reg);
res = 0xffff;
} else {
res = iagetword(chip, reg + ac97->num * 0x80);
/* reset RCS and preserve other R/WC bits */
iputdword(chip, ICHREG(GLOB_STA), tmp & ~(ICH_SRI|ICH_PRI|ICH_TRI|ICH_GSCI));
if (! chip->in_ac97_init)
- snd_printk("codec_read %d: read timeout for register 0x%x\n", ac97->num, reg);
+ snd_printk(KERN_ERR "codec_read %d: read timeout for register 0x%x\n", ac97->num, reg);
res = 0xffff;
}
}
goto __ok;
do_delay(chip);
} while (time_after_eq(end_time, jiffies));
- snd_printk("AC'97 warm reset still in progress? [0x%x]\n", igetdword(chip, ICHREG(GLOB_CNT)));
+ snd_printk(KERN_ERR "AC'97 warm reset still in progress? [0x%x]\n", igetdword(chip, ICHREG(GLOB_CNT)));
return -EIO;
__ok:
chip->remap_addr = ioremap_nocache(chip->addr,
pci_resource_len(pci, 2));
if (chip->remap_addr == NULL) {
- snd_printk("AC'97 space ioremap problem\n");
+ snd_printk(KERN_ERR "AC'97 space ioremap problem\n");
snd_intel8x0_free(chip);
return -EIO;
}
chip->remap_bmaddr = ioremap_nocache(chip->bmaddr,
pci_resource_len(pci, 3));
if (chip->remap_bmaddr == NULL) {
- snd_printk("Controller space ioremap problem\n");
+ snd_printk(KERN_ERR "Controller space ioremap problem\n");
snd_intel8x0_free(chip);
return -EIO;
}
port_inited:
if (request_irq(pci->irq, snd_intel8x0_interrupt, SA_INTERRUPT|SA_SHIRQ, card->shortname, (void *)chip)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_intel8x0_free(chip);
return -EBUSY;
}
/* set buffer address */
s->buffer_addr = substream->runtime->dma_addr;
if (s->buffer_addr & 0x3) {
- snd_printk("oh my, not aligned\n");
+ snd_printk(KERN_ERR "oh my, not aligned\n");
s->buffer_addr = s->buffer_addr & ~0x3;
}
return 0;
return 0;
} while (i-- > 0);
- snd_printk("ac97 serial bus busy\n");
+ snd_printk(KERN_ERR "ac97 serial bus busy\n");
return 1;
}
address = 0x1100 + ((data_bytes/2) * index);
if ((address + (data_bytes/2)) >= 0x1c00) {
- snd_printk("no memory for %d bytes at ind %d (addr 0x%x)\n",
+ snd_printk(KERN_ERR "no memory for %d bytes at ind %d (addr 0x%x)\n",
data_bytes, index, address);
return -ENOMEM;
}
/* check, if we can restrict PCI DMA transfers to 28 bits */
if (pci_set_dma_mask(pci, 0x0fffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x0fffffff) < 0) {
- snd_printk("architecture does not support 28bit PCI busmaster DMA\n");
+ snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
}
if (request_irq(pci->irq, snd_m3_interrupt, SA_INTERRUPT|SA_SHIRQ,
card->driver, (void *)chip)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_m3_free(chip);
return -ENOMEM;
}
snd_nm256_write_buffer(nm256_t *chip, void *src, int offset, int size)
{
offset -= chip->buffer_start;
-#ifdef SNDRV_CONFIG_DEBUG
+#ifdef CONFIG_SND_DEBUG
if (offset < 0 || offset >= chip->buffer_size) {
- snd_printk("write_buffer invalid offset = %d size = %d\n", offset, size);
+ snd_printk(KERN_ERR "write_buffer invalid offset = %d size = %d\n", offset, size);
return;
}
#endif
if (chip->irq < 0) {
if (request_irq(chip->pci->irq, chip->interrupt, SA_INTERRUPT|SA_SHIRQ,
chip->card->driver, (void*)chip)) {
- snd_printk("unable to grab IRQ %d\n", chip->pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", chip->pci->irq);
up(&chip->irq_mutex);
return -EBUSY;
}
temp = ioremap_nocache(chip->buffer_addr + chip->buffer_end - 0x400, 16);
if (temp == NULL) {
- snd_printk("Unable to scan for card signature in video RAM\n");
+ snd_printk(KERN_ERR "Unable to scan for card signature in video RAM\n");
return -EBUSY;
}
if (pointer == 0xffffffff ||
pointer < chip->buffer_size ||
pointer > chip->buffer_end) {
- snd_printk("invalid signature found: 0x%x\n", pointer);
+ snd_printk(KERN_ERR "invalid signature found: 0x%x\n", pointer);
iounmap(temp);
return -ENODEV;
} else {
chip->res_cport = request_mem_region(chip->cport_addr, NM_PORT2_SIZE,
card->driver);
if (chip->res_cport == NULL) {
- snd_printk("memory region 0x%lx (size 0x%x) busy\n",
+ snd_printk(KERN_ERR "memory region 0x%lx (size 0x%x) busy\n",
chip->cport_addr, NM_PORT2_SIZE);
err = -EBUSY;
goto __error;
}
chip->cport = ioremap_nocache(chip->cport_addr, NM_PORT2_SIZE);
if (chip->cport == NULL) {
- snd_printk("unable to map control port %lx\n", chip->cport_addr);
+ snd_printk(KERN_ERR "unable to map control port %lx\n", chip->cport_addr);
err = -ENOMEM;
goto __error;
}
chip->buffer_size,
card->driver);
if (chip->res_buffer == NULL) {
- snd_printk("nm256: buffer 0x%lx (size 0x%x) busy\n",
+ snd_printk(KERN_ERR "nm256: buffer 0x%lx (size 0x%x) busy\n",
chip->buffer_addr, chip->buffer_size);
err = -EBUSY;
goto __error;
chip->buffer = ioremap_nocache(chip->buffer_addr, chip->buffer_size);
if (chip->buffer == NULL) {
err = -ENOMEM;
- snd_printk("unable to map ring buffer at %lx\n", chip->buffer_addr);
+ snd_printk(KERN_ERR "unable to map ring buffer at %lx\n", chip->buffer_addr);
goto __error;
}
strcpy(card->driver, "NM256XL+");
break;
default:
- snd_printk("invalid device id 0x%x\n", pci->device);
+ snd_printk(KERN_ERR "invalid device id 0x%x\n", pci->device);
snd_card_free(card);
return -EINVAL;
}
rme32->port = pci_resource_start(rme32->pci, 0);
if (request_irq(pci->irq, snd_rme32_interrupt, SA_INTERRUPT | SA_SHIRQ, "RME32", (void *) rme32)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
return -EBUSY;
}
rme32->irq = pci->irq;
if ((rme32->iobase = ioremap_nocache(rme32->port, RME32_IO_SIZE)) == 0) {
- snd_printk("unable to remap memory region 0x%lx-0x%lx\n",
+ snd_printk(KERN_ERR "unable to remap memory region 0x%lx-0x%lx\n",
rme32->port, rme32->port + RME32_IO_SIZE - 1);
return -ENOMEM;
}
rme96->port = pci_resource_start(rme96->pci, 0);
if (request_irq(pci->irq, snd_rme96_interrupt, SA_INTERRUPT|SA_SHIRQ, "RME96", (void *)rme96)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
return -EBUSY;
}
rme96->irq = pci->irq;
if ((rme96->iobase = ioremap_nocache(rme96->port, RME96_IO_SIZE)) == 0) {
- snd_printk("unable to remap memory region 0x%lx-0x%lx\n", rme96->port, rme96->port + RME96_IO_SIZE - 1);
+ snd_printk(KERN_ERR "unable to remap memory region 0x%lx-0x%lx\n", rme96->port, rme96->port + RME96_IO_SIZE - 1);
return -ENOMEM;
}
break;
default:
- snd_printk("%s: unknown S/PDIF input rate (bits = 0x%x)\n",
+ snd_printk(KERN_ERR "%s: unknown S/PDIF input rate (bits = 0x%x)\n",
s->card_name, rate_bits);
return 0;
break;
rme9652->port = pci_resource_start(pci, 0);
rme9652->iobase = ioremap_nocache(rme9652->port, RME9652_IO_EXTENT);
if (rme9652->iobase == NULL) {
- snd_printk("unable to remap region 0x%lx-0x%lx\n", rme9652->port, rme9652->port + RME9652_IO_EXTENT - 1);
+ snd_printk(KERN_ERR "unable to remap region 0x%lx-0x%lx\n", rme9652->port, rme9652->port + RME9652_IO_EXTENT - 1);
return -EBUSY;
}
if (request_irq(pci->irq, snd_rme9652_interrupt, SA_INTERRUPT|SA_SHIRQ, "rme9652", (void *)rme9652)) {
- snd_printk("unable to request IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to request IRQ %d\n", pci->irq);
return -EBUSY;
}
rme9652->irq = pci->irq;
return IRQ_NONE;
if (status == 0xff) { /* failure */
outb(sonic->irqmask = ~0, SV_REG(sonic, IRQMASK));
- snd_printk("IRQ failure - interrupts disabled!!\n");
+ snd_printk(KERN_ERR "IRQ failure - interrupts disabled!!\n");
return IRQ_HANDLED;
}
if (sonic->pcm) {
/* check, if we can restrict PCI DMA transfers to 24 bits */
if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
- snd_printk("architecture does not support 24bit PCI busmaster DMA\n");
+ snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
}
sonic->game_port = pci_resource_start(pci, 4);
if (request_irq(pci->irq, snd_sonicvibes_interrupt, SA_INTERRUPT|SA_SHIRQ, "S3 SonicVibes", (void *)sonic)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_sonicvibes_free(sonic);
return -EBUSY;
}
if (!dmaa) {
dmaa = dmaio;
dmaio += 0x10;
- snd_printk("BIOS did not allocate DDMA channel A i/o, allocated at 0x%x\n", dmaa);
+ snd_printk(KERN_INFO "BIOS did not allocate DDMA channel A i/o, allocated at 0x%x\n", dmaa);
}
if (!dmac) {
dmac = dmaio;
dmaio += 0x10;
- snd_printk("BIOS did not allocate DDMA channel C i/o, allocated at 0x%x\n", dmac);
+ snd_printk(KERN_INFO "BIOS did not allocate DDMA channel C i/o, allocated at 0x%x\n", dmac);
}
pci_write_config_dword(pci, 0x40, dmaa);
pci_write_config_dword(pci, 0x48, dmac);
if ((sonic->res_dmaa = request_region(dmaa, 0x10, "S3 SonicVibes DDMA-A")) == NULL) {
snd_sonicvibes_free(sonic);
- snd_printk("unable to grab DDMA-A port at 0x%x-0x%x\n", dmaa, dmaa + 0x10 - 1);
+ snd_printk(KERN_ERR "unable to grab DDMA-A port at 0x%x-0x%x\n", dmaa, dmaa + 0x10 - 1);
return -EBUSY;
}
if ((sonic->res_dmac = request_region(dmac, 0x10, "S3 SonicVibes DDMA-C")) == NULL) {
snd_sonicvibes_free(sonic);
- snd_printk("unable to grab DDMA-C port at 0x%x-0x%x\n", dmac, dmac + 0x10 - 1);
+ snd_printk(KERN_ERR "unable to grab DDMA-C port at 0x%x-0x%x\n", dmac, dmac + 0x10 - 1);
return -EBUSY;
}
}
if (count == 0 && !trident->ac97_detect) {
- snd_printk("ac97 codec read TIMEOUT [0x%x/0x%x]!!!\n", reg, data);
+ snd_printk(KERN_ERR "ac97 codec read TIMEOUT [0x%x/0x%x]!!!\n", reg, data);
data = 0;
}
_ac97.num = 1;
err = snd_ac97_mixer(trident->ac97_bus, &_ac97, &trident->ac97_sec);
if (err < 0)
- snd_printk("SI7018: the secondary codec - invalid access\n");
+ snd_printk(KERN_ERR "SI7018: the secondary codec - invalid access\n");
#if 0 // only for my testing purpose --jk
{
ac97_t *mc97;
err = snd_ac97_modem(trident->card, &_ac97, &mc97);
if (err < 0)
- snd_printk("snd_ac97_modem returned error %i\n", err);
+ snd_printk(KERN_ERR "snd_ac97_modem returned error %i\n", err);
}
#endif
}
goto __si7018_ok;
do_delay(trident);
} while (time_after_eq(end_time, jiffies));
- snd_printk("AC'97 codec ready error [0x%x]\n", inl(TRID_REG(trident, SI_SERIAL_INTF_CTRL)));
+ snd_printk(KERN_ERR "AC'97 codec ready error [0x%x]\n", inl(TRID_REG(trident, SI_SERIAL_INTF_CTRL)));
if (r-- > 0) {
end_time = jiffies + HZ;
do {
/* check, if we can restrict PCI DMA transfers to 30 bits */
if (pci_set_dma_mask(pci, 0x3fffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x3fffffff) < 0) {
- snd_printk("architecture does not support 30bit PCI busmaster DMA\n");
+ snd_printk(KERN_ERR "architecture does not support 30bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
}
trident->port = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_trident_interrupt, SA_INTERRUPT|SA_SHIRQ, "Trident Audio", (void *) trident)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_trident_free(trident);
return -EBUSY;
}
static int is_valid_page(unsigned long ptr)
{
if (ptr & ~0x3fffffffUL) {
- snd_printk("max memory size is 1GB!!\n");
+ snd_printk(KERN_ERR "max memory size is 1GB!!\n");
return 0;
}
if (ptr & (SNDRV_TRIDENT_PAGE_SIZE-1)) {
- snd_printk("page is not aligned\n");
+ snd_printk(KERN_ERR "page is not aligned\n");
return 0;
}
return 1;
idx = count >> 24;
if (idx >= viadev->tbl_entries) {
#ifdef POINTER_DEBUG
- printk("fail: invalid idx = %i/%i\n", idx, viadev->tbl_entries);
+ printk(KERN_DEBUG "fail: invalid idx = %i/%i\n", idx, viadev->tbl_entries);
#endif
res = viadev->lastpos;
} else {
} while (time_before(jiffies, end_time));
if ((val = snd_via82xx_codec_xread(chip)) & VIA_REG_AC97_BUSY)
- snd_printk("AC'97 codec is not ready [0x%x]\n", val);
+ snd_printk(KERN_ERR "AC'97 codec is not ready [0x%x]\n", val);
#if 0 /* FIXME: we don't support the second codec yet so skip the detection now.. */
snd_via82xx_codec_xwrite(chip, VIA_REG_AC97_READ |
snd_via8233_interrupt : snd_via686_interrupt,
SA_INTERRUPT|SA_SHIRQ,
card->driver, (void *)chip)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_via82xx_free(chip);
return -EBUSY;
}
res = viadev->lastpos;
} else if (check_invalid_pos(viadev, res)) {
#ifdef POINTER_DEBUG
- printk("fail: idx = %i/%i, lastpos = 0x%x, bufsize2 = 0x%x, offsize = 0x%x, size = 0x%x, count = 0x%x\n", idx, viadev->tbl_entries, viadev->lastpos, viadev->bufsize2, viadev->idx_table[idx].offset, viadev->idx_table[idx].size, count);
+ printk(KERN_DEBUG "fail: idx = %i/%i, lastpos = 0x%x, bufsize2 = 0x%x, offsize = 0x%x, size = 0x%x, count = 0x%x\n", idx, viadev->tbl_entries, viadev->lastpos, viadev->bufsize2, viadev->idx_table[idx].offset, viadev->idx_table[idx].size, count);
#endif
if (count && size < count) {
snd_printd(KERN_ERR "invalid via82xx_cur_ptr, using last valid pointer\n");
} while (time_before(jiffies, end_time));
if ((val = snd_via82xx_codec_xread(chip)) & VIA_REG_AC97_BUSY)
- snd_printk("AC'97 codec is not ready [0x%x]\n", val);
+ snd_printk(KERN_ERR "AC'97 codec is not ready [0x%x]\n", val);
snd_via82xx_codec_xwrite(chip, VIA_REG_AC97_READ |
VIA_REG_AC97_SECONDARY_VALID |
chip->port = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_via82xx_interrupt, SA_INTERRUPT|SA_SHIRQ,
card->driver, (void *)chip)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_via82xx_free(chip);
return -EBUSY;
}
pci_write_config_word(pci, PCIR_DSXG_LEGACY, legacy_ctrl);
} else if ((err = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0) {
snd_card_free(card);
- snd_printk("cannot create opl3 hwdep\n");
+ snd_printk(KERN_ERR "cannot create opl3 hwdep\n");
return err;
}
}
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(1);
} while (time_before(jiffies, end_time));
- snd_printk("codec_ready: codec %i is not ready [0x%x]\n", secondary, snd_ymfpci_readw(chip, reg));
+ snd_printk(KERN_ERR "codec_ready: codec %i is not ready [0x%x]\n", secondary, snd_ymfpci_readw(chip, reg));
return -EBUSY;
}
pci_set_master(pci);
if ((chip->res_reg_area = request_mem_region(chip->reg_area_phys, 0x8000, "YMFPCI")) == NULL) {
- snd_printk("unable to grab memory region 0x%lx-0x%lx\n", chip->reg_area_phys, chip->reg_area_phys + 0x8000 - 1);
+ snd_printk(KERN_ERR "unable to grab memory region 0x%lx-0x%lx\n", chip->reg_area_phys, chip->reg_area_phys + 0x8000 - 1);
snd_ymfpci_free(chip);
return -EBUSY;
}
if (request_irq(pci->irq, snd_ymfpci_interrupt, SA_INTERRUPT|SA_SHIRQ, "YMFPCI", (void *) chip)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_ymfpci_free(chip);
return -EBUSY;
}
git.openpandora.org / pandora-kernel.git / commitdiff