~~~~~~~~~~~~~~~~
The latest development codes for HD-audio are found on sound git tree:
-- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
The master branch or for-next branches can be used as the main
development branches in general while the HD-audio specific patches
install(-modules). See INSTALL in the package. The snapshot tarballs
are found at:
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/
+- ftp://ftp.suse.com/pub/people/tiwai/snapshot/
Sending a Bug Report
The hda-verb program is found in the ftp directory:
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+- ftp://ftp.suse.com/pub/people/tiwai/misc/
Also a git repository is available:
The package is found in:
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+- ftp://ftp.suse.com/pub/people/tiwai/misc/
A git repository is available:
M: Paul Menage <paul@paulmenage.org>
M: Li Zefan <lizf@cn.fujitsu.com>
L: containers@lists.linux-foundation.org
+L: cgroups@vger.kernel.org
S: Maintained
F: include/linux/cgroup*
F: kernel/cgroup*
M: Balbir Singh <bsingharora@gmail.com>
M: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
M: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
+L: cgroups@vger.kernel.org
L: linux-mm@kvack.org
S: Maintained
F: mm/memcontrol.c
M: Ralf Baechle <ralf@linux-mips.org>
L: linux-mips@linux-mips.org
W: http://www.linux-mips.org/
-T: git git://git.linux-mips.org/pub/scm/linux.git
+T: git git://git.linux-mips.org/pub/scm/ralf/linux.git
Q: http://patchwork.linux-mips.org/project/linux-mips/list/
S: Supported
F: Documentation/mips/
VERSION = 3
PATCHLEVEL = 2
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
struct bfin_serial_port {
struct uart_port port;
unsigned int old_status;
+ int tx_irq;
+ int rx_irq;
int status_irq;
#ifndef BFIN_UART_BF54X_STYLE
unsigned int lsr;
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>
-#include <linux/export.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
{BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"},
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>
-#include <linux/export.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
{BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/etherdevice.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#include <linux/bfin_mac.h>
-#include <linux/export.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
static struct bfin_phydev_platform_data bfin_phydev_data[] = {
#include <linux/device.h>
#include <linux/etherdevice.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#include <linux/bfin_mac.h>
-#include <linux/export.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
static struct bfin_phydev_platform_data bfin_phydev_data[] = {
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#include <linux/bfin_mac.h>
-#include <linux/export.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
static struct bfin_phydev_platform_data bfin_phydev_data[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
#include <linux/device.h>
#include <linux/etherdevice.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
#include <linux/i2c/adp8860.h>
-#include <linux/export.h>
static struct led_info adp8860_leds[] = {
{
.name = "adp8860-led7",
#include <linux/device.h>
#include <linux/etherdevice.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#include <linux/bfin_mac.h>
-#include <linux/export.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
static struct bfin_phydev_platform_data bfin_phydev_data[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART2_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART2_TX,
+ .end = IRQ_UART2_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART2_RX,
- .end = IRQ_UART2_RX+1,
+ .end = IRQ_UART2_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART0_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART2_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART2_TX,
+ .end = IRQ_UART2_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART2_RX,
- .end = IRQ_UART2_RX+1,
+ .end = IRQ_UART2_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART3_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART3_TX,
+ .end = IRQ_UART3_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART3_RX,
- .end = IRQ_UART3_RX+1,
+ .end = IRQ_UART3_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART0_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART2_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART2_TX,
+ .end = IRQ_UART2_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART2_RX,
- .end = IRQ_UART2_RX+1,
+ .end = IRQ_UART2_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART3_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART3_TX,
+ .end = IRQ_UART3_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART3_RX,
- .end = IRQ_UART3_RX+1,
+ .end = IRQ_UART3_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL + 2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX + 1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX+1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX+1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX+1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
static struct map_info flash_map;
static struct mtd_info *mymtd;
-static int nr_parts;
-static struct mtd_partition *parts;
static const char *part_probe_types[] = {
"cmdlinepart",
#ifdef CONFIG_MTD_REDBOOT_PARTS
mymtd = do_map_probe("cfi_probe", &flash_map);
if (mymtd) {
mymtd->owner = THIS_MODULE;
-
- nr_parts = parse_mtd_partitions(mymtd,
- part_probe_types,
- &parts, 0);
- mtd_device_register(mymtd, parts, nr_parts);
+ mtd_device_parse_register(mymtd, part_probe_types,
+ 0, NULL, 0);
} else {
pr_err("Failed to register MTD device for flash\n");
}
* the other bits alone.
*/
cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff);
- if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED,
- "SMP-IPI", mailbox_interrupt)) {
+ if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt,
+ IRQF_PERCPU | IRQF_NO_THREAD, "SMP-IPI",
+ mailbox_interrupt)) {
panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
}
}
/* arg[0] is "g", the rest is boot parameters */
for (i = 1; i < argc; i++) {
- if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
+ if (strlen(arcs_cmdline) + strlen(arg[i]) + 1
>= sizeof(arcs_cmdline))
break;
strcat(arcs_cmdline, arg[i]);
return -EINVAL;
}
+#define gpio_get_value_cansleep gpio_get_value
+
static inline void gpio_set_value(unsigned gpio, int value)
{
switch (bcm47xx_bus_type) {
}
}
+#define gpio_set_value_cansleep gpio_set_value
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ return 0;
+}
+
+static inline int gpio_is_valid(unsigned gpio)
+{
+ return gpio < (BCM47XX_EXTIF_GPIO_LINES + BCM47XX_CHIPCO_GPIO_LINES);
+}
+
+
static inline int gpio_direction_input(unsigned gpio)
{
switch (bcm47xx_bus_type) {
}
-/* cansleep wrappers */
-#include <asm-generic/gpio.h>
-
#endif /* __BCM47XX_GPIO_H */
#define __NR_syncfs (__NR_Linux + 342)
#define __NR_sendmmsg (__NR_Linux + 343)
#define __NR_setns (__NR_Linux + 344)
+#define __NR_process_vm_readv (__NR_Linux + 345)
+#define __NR_process_vm_writev (__NR_Linux + 346)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 344
+#define __NR_Linux_syscalls 346
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 344
+#define __NR_O32_Linux_syscalls 346
#if _MIPS_SIM == _MIPS_SIM_ABI64
#define __NR_syncfs (__NR_Linux + 301)
#define __NR_sendmmsg (__NR_Linux + 302)
#define __NR_setns (__NR_Linux + 303)
+#define __NR_process_vm_readv (__NR_Linux + 304)
+#define __NR_process_vm_writev (__NR_Linux + 305)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 303
+#define __NR_Linux_syscalls 305
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 303
+#define __NR_64_Linux_syscalls 305
#if _MIPS_SIM == _MIPS_SIM_NABI32
#define __NR_syncfs (__NR_Linux + 306)
#define __NR_sendmmsg (__NR_Linux + 307)
#define __NR_setns (__NR_Linux + 308)
+#define __NR_process_vm_readv (__NR_Linux + 309)
+#define __NR_process_vm_writev (__NR_Linux + 310)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 308
+#define __NR_Linux_syscalls 310
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 308
+#define __NR_N32_Linux_syscalls 310
#ifdef __KERNEL__
/*
* Compare interrupt can be routed and latched outside the core,
- * so a single execution hazard barrier may not be enough to give
- * it time to clear as seen in the Cause register. 4 time the
- * pipeline depth seems reasonably conservative, and empirically
- * works better in configurations with high CPU/bus clock ratios.
+ * so wait up to worst case number of cycle counter ticks for timer interrupt
+ * changes to propagate to the cause register.
*/
-
-#define compare_change_hazard() \
- do { \
- irq_disable_hazard(); \
- irq_disable_hazard(); \
- irq_disable_hazard(); \
- irq_disable_hazard(); \
- } while (0)
+#define COMPARE_INT_SEEN_TICKS 50
int c0_compare_int_usable(void)
{
* IP7 already pending? Try to clear it by acking the timer.
*/
if (c0_compare_int_pending()) {
- write_c0_compare(read_c0_count());
- compare_change_hazard();
+ cnt = read_c0_count();
+ write_c0_compare(cnt);
+ back_to_back_c0_hazard();
+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
+ if (!c0_compare_int_pending())
+ break;
if (c0_compare_int_pending())
return 0;
}
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
- compare_change_hazard();
+ back_to_back_c0_hazard();
if ((int)(read_c0_count() - cnt) < 0)
break;
/* increase delta if the timer was already expired */
while ((int)(read_c0_count() - cnt) <= 0)
; /* Wait for expiry */
- compare_change_hazard();
+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
+ if (c0_compare_int_pending())
+ break;
if (!c0_compare_int_pending())
return 0;
-
- write_c0_compare(read_c0_count());
- compare_change_hazard();
+ cnt = read_c0_count();
+ write_c0_compare(cnt);
+ back_to_back_c0_hazard();
+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
+ if (!c0_compare_int_pending())
+ break;
if (c0_compare_int_pending())
return 0;
* for more details.
*/
+#include <linux/module.h>
#include <linux/cpufreq.h>
#include <linux/platform_device.h>
sys sys_syncfs 1
sys sys_sendmmsg 4
sys sys_setns 2
+ sys sys_process_vm_readv 6 /* 4345 */
+ sys sys_process_vm_writev 6
.endm
/* We pre-compute the number of _instruction_ bytes needed to
PTR sys_syncfs
PTR sys_sendmmsg
PTR sys_setns
+ PTR sys_process_vm_readv
+ PTR sys_process_vm_writev /* 5305 */
.size sys_call_table,.-sys_call_table
PTR sys_syncfs
PTR compat_sys_sendmmsg
PTR sys_setns
+ PTR compat_sys_process_vm_readv
+ PTR compat_sys_process_vm_writev /* 6310 */
.size sysn32_call_table,.-sysn32_call_table
PTR sys_syncfs
PTR compat_sys_sendmmsg
PTR sys_setns
+ PTR compat_sys_process_vm_readv /* 4345 */
+ PTR compat_sys_process_vm_writev
.size sys_call_table,.-sys_call_table
}
#endif /* CONFIG_MIPS_MT_SMTC */
- cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
+ if (!cpu_data[cpu].asid_cache)
+ cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
atomic_inc(&init_mm.mm_count);
current->active_mm = &init_mm;
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
*/
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/clk.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <asm/bootinfo.h>
*/
#include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/clk.h>
*/
#include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/clk.h>
*/
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
+#include <linux/export.h>
#include <lantiq_soc.h>
#include <xway_dma.h>
*/
#include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/ioport.h>
*/
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/clk.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/clk.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/pm.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/reboot.h>
#include <lantiq_soc.h>
+++ /dev/null
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *
- * Author: source@mvista.com
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <pci.h>
-#include <glb.h>
-#include <nand.h>
-
-static struct resource pci_io_resource = {
- .start = PNX8550_PCIIO + 0x1000, /* reserve regacy I/O space */
- .end = PNX8550_PCIIO + PNX8550_PCIIO_SIZE,
- .name = "pci IO space",
- .flags = IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
- .start = PNX8550_PCIMEM,
- .end = PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1,
- .name = "pci memory space",
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops pnx8550_pci_ops;
-
-static struct pci_controller pnx8550_controller = {
- .pci_ops = &pnx8550_pci_ops,
- .io_map_base = PNX8550_PORT_BASE,
- .io_resource = &pci_io_resource,
- .mem_resource = &pci_mem_resource,
-};
-
-/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
-static inline unsigned long get_system_mem_size(void)
-{
- /* Read IP2031_RANK0_ADDR_LO */
- unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
- /* Read IP2031_RANK1_ADDR_HI */
- unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
-
- return dram_r1_hi - dram_r0_lo + 1;
-}
-
-static int __init pnx8550_pci_setup(void)
-{
- int pci_mem_code;
- int mem_size = get_system_mem_size() >> 20;
-
- /* Clear the Global 2 Register, PCI Inta Output Enable Registers
- Bit 1:Enable DAC Powerdown
- -> 0:DACs are enabled and are working normally
- 1:DACs are powerdown
- Bit 0:Enable of PCI inta output
- -> 0 = Disable PCI inta output
- 1 = Enable PCI inta output
- */
- PNX8550_GLB2_ENAB_INTA_O = 0;
-
- /* Calc the PCI mem size code */
- if (mem_size >= 128)
- pci_mem_code = SIZE_128M;
- else if (mem_size >= 64)
- pci_mem_code = SIZE_64M;
- else if (mem_size >= 32)
- pci_mem_code = SIZE_32M;
- else
- pci_mem_code = SIZE_16M;
-
- /* Set PCI_XIO registers */
- outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
- outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
- outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
- outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
-
- /* Send memory transaction via PCI_BASE2 */
- outl(0x00000001, PCI_BASE | PCI_IO);
-
- /* Unlock the setup register */
- outl(0xca, PCI_BASE | PCI_UNLOCKREG);
-
- /*
- * BAR0 of PNX8550 (pci base 10) must be zero in order for ide
- * to work, and in order for bus_to_baddr to work without any
- * hacks.
- */
- outl(0x00000000, PCI_BASE | PCI_BASE10);
-
- /*
- *These two bars are set by default or the boot code.
- * However, it's safer to set them here so we're not boot
- * code dependent.
- */
- outl(0x1be00000, PCI_BASE | PCI_BASE14); /* PNX MMIO */
- outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18); /* XIO */
-
- outl(PCI_EN_TA |
- PCI_EN_PCI2MMI |
- PCI_EN_XIO |
- PCI_SETUP_BASE18_SIZE(SIZE_32M) |
- PCI_SETUP_BASE18_EN |
- PCI_SETUP_BASE14_EN |
- PCI_SETUP_BASE10_PREF |
- PCI_SETUP_BASE10_SIZE(pci_mem_code) |
- PCI_SETUP_CFGMANAGE_EN |
- PCI_SETUP_PCIARB_EN,
- PCI_BASE |
- PCI_SETUP); /* PCI_SETUP */
- outl(0x00000000, PCI_BASE | PCI_CTRL); /* PCI_CONTROL */
-
- register_pci_controller(&pnx8550_controller);
-
- return 0;
-}
-
-arch_initcall(pnx8550_pci_setup);
+++ /dev/null
-/*
- *
- * 2.6 port, Embedded Alley Solutions, Inc
- *
- * Based on Per Hallsmark, per.hallsmark@mvista.com
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/serial_pnx8xxx.h>
-#include <linux/pm.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/time.h>
-
-#include <glb.h>
-#include <int.h>
-#include <pci.h>
-#include <uart.h>
-#include <nand.h>
-
-extern void __init board_setup(void);
-extern void pnx8550_machine_restart(char *);
-extern void pnx8550_machine_halt(void);
-extern void pnx8550_machine_power_off(void);
-extern struct resource ioport_resource;
-extern struct resource iomem_resource;
-extern char *prom_getcmdline(void);
-
-struct resource standard_io_resources[] = {
- {
- .start = 0x00,
- .end = 0x1f,
- .name = "dma1",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x40,
- .end = 0x5f,
- .name = "timer",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x80,
- .end = 0x8f,
- .name = "dma page reg",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0xc0,
- .end = 0xdf,
- .name = "dma2",
- .flags = IORESOURCE_BUSY
- },
-};
-
-#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources)
-
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
-
-/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
-unsigned long get_system_mem_size(void)
-{
- /* Read IP2031_RANK0_ADDR_LO */
- unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
- /* Read IP2031_RANK1_ADDR_HI */
- unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
-
- return dram_r1_hi - dram_r0_lo + 1;
-}
-
-int pnx8550_console_port = -1;
-
-void __init plat_mem_setup(void)
-{
- int i;
- char* argptr;
-
- board_setup(); /* board specific setup */
-
- _machine_restart = pnx8550_machine_restart;
- _machine_halt = pnx8550_machine_halt;
- pm_power_off = pnx8550_machine_power_off;
-
- /* Clear the Global 2 Register, PCI Inta Output Enable Registers
- Bit 1:Enable DAC Powerdown
- -> 0:DACs are enabled and are working normally
- 1:DACs are powerdown
- Bit 0:Enable of PCI inta output
- -> 0 = Disable PCI inta output
- 1 = Enable PCI inta output
- */
- PNX8550_GLB2_ENAB_INTA_O = 0;
-
- /* IO/MEM resources. */
- set_io_port_base(PNX8550_PORT_BASE);
- ioport_resource.start = 0;
- ioport_resource.end = ~0;
- iomem_resource.start = 0;
- iomem_resource.end = ~0;
-
- /* Request I/O space for devices on this board */
- for (i = 0; i < STANDARD_IO_RESOURCES; i++)
- request_resource(&ioport_resource, standard_io_resources + i);
-
- /* Place the Mode Control bit for GPIO pin 16 in primary function */
- /* Pin 16 is used by UART1, UA1_TX */
- outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
- (PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
- PNX8550_GPIO_MC1);
-
- argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
- argptr += strlen("console=ttyS");
- pnx8550_console_port = *argptr == '0' ? 0 : 1;
-
- /* We must initialize the UART (console) before early printk */
- /* Set LCR to 8-bit and BAUD to 38400 (no 5) */
- ip3106_lcr(UART_BASE, pnx8550_console_port) =
- PNX8XXX_UART_LCR_8BIT;
- ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
- }
-}
* Support for all devices (greater than 16) added by David Gathright.
*/
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <asm/pci.h>
/* Get the boot parameters */
for (i = 1; i < argc; i++) {
- if (strlen(arcs_cmdline) + strlen(arg[i] + 1) >=
+ if (strlen(arcs_cmdline) + strlen(arg[i]) + 1 >=
sizeof(arcs_cmdline))
break;
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
- depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !47x)) && EXPERIMENTAL
+ depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !PPC_47x)) && EXPERIMENTAL
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
echo 'disable kernel modules' ; \
false ; \
fi
- @if ! /bin/echo dssall | $(AS) -many -o $(TOUT) >/dev/null 2>&1 ; then \
- echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build ' ; \
- echo 'correctly with old versions of binutils.' ; \
- echo '*** Please upgrade your binutils to 2.12.1 or newer' ; \
- false ; \
- fi
CLEAN_FILES += $(TOUT)
int t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%2 # atomic_add_return\n\
add %0,%1,%0\n"
PPC405_ERR77(0,%2)
" stwcx. %0,0,%2 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (a), "r" (&v->counter)
: "cc", "memory");
int t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%2 # atomic_sub_return\n\
subf %0,%1,%0\n"
PPC405_ERR77(0,%2)
" stwcx. %0,0,%2 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (a), "r" (&v->counter)
: "cc", "memory");
int t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%1 # atomic_inc_return\n\
addic %0,%0,1\n"
PPC405_ERR77(0,%1)
" stwcx. %0,0,%1 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (&v->counter)
: "cc", "xer", "memory");
int t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%1 # atomic_dec_return\n\
addic %0,%0,-1\n"
PPC405_ERR77(0,%1)
" stwcx. %0,0,%1\n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (&v->counter)
: "cc", "xer", "memory");
int t;
__asm__ __volatile__ (
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%1 # __atomic_add_unless\n\
cmpw 0,%0,%3 \n\
beq- 2f \n\
PPC405_ERR77(0,%2)
" stwcx. %0,0,%1 \n\
bne- 1b \n"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
" subf %0,%2,%0 \n\
2:"
: "=&r" (t)
int t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%1 # atomic_dec_if_positive\n\
cmpwi %0,1\n\
addi %0,%0,-1\n\
PPC405_ERR77(0,%1)
" stwcx. %0,0,%1\n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
"\n\
2:" : "=&b" (t)
: "r" (&v->counter)
long t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%2 # atomic64_add_return\n\
add %0,%1,%0\n\
stdcx. %0,0,%2 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (a), "r" (&v->counter)
: "cc", "memory");
long t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%2 # atomic64_sub_return\n\
subf %0,%1,%0\n\
stdcx. %0,0,%2 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (a), "r" (&v->counter)
: "cc", "memory");
long t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%1 # atomic64_inc_return\n\
addic %0,%0,1\n\
stdcx. %0,0,%1 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (&v->counter)
: "cc", "xer", "memory");
long t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%1 # atomic64_dec_return\n\
addic %0,%0,-1\n\
stdcx. %0,0,%1\n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (&v->counter)
: "cc", "xer", "memory");
long t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%1 # atomic64_dec_if_positive\n\
addic. %0,%0,-1\n\
blt- 2f\n\
stdcx. %0,0,%1\n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
"\n\
2:" : "=&r" (t)
: "r" (&v->counter)
long t;
__asm__ __volatile__ (
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%1 # __atomic_add_unless\n\
cmpd 0,%0,%3 \n\
beq- 2f \n\
add %0,%2,%0 \n"
" stdcx. %0,0,%1 \n\
bne- 1b \n"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
" subf %0,%2,%0 \n\
2:"
: "=&r" (t)
return (old & mask); \
}
-DEFINE_TESTOP(test_and_set_bits, or, PPC_RELEASE_BARRIER,
- PPC_ACQUIRE_BARRIER, 0)
+DEFINE_TESTOP(test_and_set_bits, or, PPC_ATOMIC_ENTRY_BARRIER,
+ PPC_ATOMIC_EXIT_BARRIER, 0)
DEFINE_TESTOP(test_and_set_bits_lock, or, "",
PPC_ACQUIRE_BARRIER, 1)
-DEFINE_TESTOP(test_and_clear_bits, andc, PPC_RELEASE_BARRIER,
- PPC_ACQUIRE_BARRIER, 0)
-DEFINE_TESTOP(test_and_change_bits, xor, PPC_RELEASE_BARRIER,
- PPC_ACQUIRE_BARRIER, 0)
+DEFINE_TESTOP(test_and_clear_bits, andc, PPC_ATOMIC_ENTRY_BARRIER,
+ PPC_ATOMIC_EXIT_BARRIER, 0)
+DEFINE_TESTOP(test_and_change_bits, xor, PPC_ATOMIC_ENTRY_BARRIER,
+ PPC_ATOMIC_EXIT_BARRIER, 0)
static __inline__ int test_and_set_bit(unsigned long nr,
volatile unsigned long *addr)
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
__asm__ __volatile ( \
- PPC_RELEASE_BARRIER \
+ PPC_ATOMIC_ENTRY_BARRIER \
"1: lwarx %0,0,%2\n" \
insn \
PPC405_ERR77(0, %2) \
"2: stwcx. %1,0,%2\n" \
"bne- 1b\n" \
+ PPC_ATOMIC_EXIT_BARRIER \
"li %1,0\n" \
"3: .section .fixup,\"ax\"\n" \
"4: li %1,%3\n" \
return -EFAULT;
__asm__ __volatile__ (
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %1,0,%3 # futex_atomic_cmpxchg_inatomic\n\
cmpw 0,%1,%4\n\
bne- 3f\n"
PPC405_ERR77(0,%3)
"2: stwcx. %5,0,%3\n\
bne- 1b\n"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
"3: .section .fixup,\"ax\"\n\
4: li %0,%6\n\
b 3b\n\
#define MSR_ MSR_ME | MSR_CE
#define MSR_KERNEL MSR_ | MSR_64BIT
-#define MSR_USER32 MSR_ | MSR_PR | MSR_EE | MSR_DE
+#define MSR_USER32 MSR_ | MSR_PR | MSR_EE
#define MSR_USER64 MSR_USER32 | MSR_64BIT
#elif defined (CONFIG_40x)
#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
#ifdef __powerpc64__
-extern char _end[];
+extern char __end_interrupts[];
static inline int in_kernel_text(unsigned long addr)
{
extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup;
extern void do_lwsync_fixups(unsigned long value, void *fixup_start,
void *fixup_end);
+extern void do_final_fixups(void);
static inline void eieio(void)
{
START_LWSYNC_SECTION(97); \
isync; \
MAKE_LWSYNC_SECTION_ENTRY(97, __lwsync_fixup);
-#define PPC_ACQUIRE_BARRIER "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER)
-#define PPC_RELEASE_BARRIER stringify_in_c(LWSYNC) "\n"
+#define PPC_ACQUIRE_BARRIER "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER)
+#define PPC_RELEASE_BARRIER stringify_in_c(LWSYNC) "\n"
+#define PPC_ATOMIC_ENTRY_BARRIER "\n" stringify_in_c(LWSYNC) "\n"
+#define PPC_ATOMIC_EXIT_BARRIER "\n" stringify_in_c(sync) "\n"
#else
#define PPC_ACQUIRE_BARRIER
#define PPC_RELEASE_BARRIER
+#define PPC_ATOMIC_ENTRY_BARRIER
+#define PPC_ATOMIC_EXIT_BARRIER
#endif
#endif /* __KERNEL__ */
stw r9,8(r1)
stw r11,12(r1)
stw r3,ORIG_GPR3(r1)
+ /*
+ * The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1.
+ * If from user mode there is only one stack frame on the stack, and
+ * accessing CALLER_ADDR1 will cause oops. So we need create a dummy
+ * stack frame to make trace_hardirqs_off happy.
+ */
+ andi. r12,r12,MSR_PR
+ beq 11f
+ stwu r1,-16(r1)
+ bl trace_hardirqs_off
+ addi r1,r1,16
+ b 12f
+
+11:
bl trace_hardirqs_off
+12:
lwz r0,GPR0(r1)
lwz r3,ORIG_GPR3(r1)
lwz r4,GPR4(r1)
#include <linux/jump_label.h>
#include <asm/code-patching.h>
+#ifdef HAVE_JUMP_LABEL
void arch_jump_label_transform(struct jump_entry *entry,
enum jump_label_type type)
{
else
patch_instruction(addr, PPC_INST_NOP);
}
+#endif
/* On relocatable kernels interrupts handlers and our code
can be in different regions, so we don't patch them */
- extern u32 __end_interrupts;
if ((ulong)inst < (ulong)&__end_interrupts)
return;
#endif
mr r5, r31
li r0, 0
-#elif defined(CONFIG_44x) && !defined(CONFIG_47x)
+#elif defined(CONFIG_44x) && !defined(CONFIG_PPC_47x)
/*
* Code for setting up 1:1 mapping for PPC440x for KEXEC
new_thread = &new->thread;
old_thread = ¤t->thread;
-#if defined(CONFIG_PPC_BOOK3E_64)
- /* XXX Current Book3E code doesn't deal with kernel side DBCR0,
- * we always hold the user values, so we set it now.
- *
- * However, we ensure the kernel MSR:DE is appropriately cleared too
- * to avoid spurrious single step exceptions in the kernel.
- *
- * This will have to change to merge with the ppc32 code at some point,
- * but I don't like much what ppc32 is doing today so there's some
- * thinking needed there
- */
- if ((new_thread->dbcr0 | old_thread->dbcr0) & DBCR0_IDM) {
- u32 dbcr0;
-
- mtmsr(mfmsr() & ~MSR_DE);
- isync();
- dbcr0 = mfspr(SPRN_DBCR0);
- dbcr0 = (dbcr0 & DBCR0_EDM) | new_thread->dbcr0;
- mtspr(SPRN_DBCR0, dbcr0);
- }
-#endif /* CONFIG_PPC64_BOOK3E */
-
#ifdef CONFIG_PPC64
/*
* Collect processor utilization data per process
if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR))
printk("CFAR: "REG"\n", regs->orig_gpr3);
if (trap == 0x300 || trap == 0x600)
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
printk("DEAR: "REG", ESR: "REG"\n", regs->dar, regs->dsisr);
#else
printk("DAR: "REG", DSISR: %08lx\n", regs->dar, regs->dsisr);
return;
base = alloc_down(size, PAGE_SIZE, 0);
- if (base == 0) {
- prom_printf("RTAS allocation failed !\n");
- return;
- }
+ if (base == 0)
+ prom_panic("Could not allocate memory for RTAS\n");
rtas_inst = call_prom("open", 1, 1, ADDR("/rtas"));
if (!IHANDLE_VALID(rtas_inst)) {
PTRRELOC(&__start___lwsync_fixup),
PTRRELOC(&__stop___lwsync_fixup));
+ do_final_fixups();
+
return KERNELBASE + offset;
}
&__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
do_lwsync_fixups(cur_cpu_spec->cpu_features,
&__start___lwsync_fixup, &__stop___lwsync_fixup);
+ do_final_fixups();
/*
* Unflatten the device-tree passed by prom_init or kexec
compat_sigset_t cset;
switch (_NSIG_WORDS) {
- case 4: cset.sig[5] = set->sig[3] & 0xffffffffull;
+ case 4: cset.sig[6] = set->sig[3] & 0xffffffffull;
cset.sig[7] = set->sig[3] >> 32;
case 3: cset.sig[4] = set->sig[2] & 0xffffffffull;
cset.sig[5] = set->sig[2] >> 32;
if (user_mode(regs)) {
current->thread.dbcr0 &= ~DBCR0_IC;
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0,
current->thread.dbcr1))
regs->msr |= MSR_DE;
else
/* Make sure the IDM bit is off */
current->thread.dbcr0 &= ~DBCR0_IDM;
-#endif
}
_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
#include <asm/processor.h>
#include <asm/cputhreads.h>
#include <asm/page.h>
+#include <asm/hvcall.h>
#include <linux/gfp.h>
#include <linux/sched.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <asm/cputable.h>
#include <asm/code-patching.h>
+#include <asm/page.h>
+#include <asm/sections.h>
struct fixup_entry {
}
}
+void do_final_fixups(void)
+{
+#if defined(CONFIG_PPC64) && defined(CONFIG_RELOCATABLE)
+ int *src, *dest;
+ unsigned long length;
+
+ if (PHYSICAL_START == 0)
+ return;
+
+ src = (int *)(KERNELBASE + PHYSICAL_START);
+ dest = (int *)KERNELBASE;
+ length = (__end_interrupts - _stext) / sizeof(int);
+
+ while (length--) {
+ patch_instruction(dest, *src);
+ src++;
+ dest++;
+ }
+#endif
+}
+
#ifdef CONFIG_FTR_FIXUP_SELFTEST
#define check(x) \
config MCU_MPC8349EMITX
bool "MPC8349E-mITX MCU driver"
- depends on I2C && PPC_83xx
+ depends on I2C=y && PPC_83xx
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN)));
u64 ppe_id;
u64 thread_id;
+ unsigned long ipi_mask;
};
static DEFINE_PER_CPU(struct ps3_private, ps3_private);
static void ps3_chip_eoi(struct irq_data *d)
{
const struct ps3_private *pd = irq_data_get_irq_chip_data(d);
- lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq);
+
+ /* non-IPIs are EOIed here. */
+
+ if (!test_bit(63 - d->irq, &pd->ipi_mask))
+ lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq);
}
/**
cpu, virq, pd->bmp.ipi_debug_brk_mask);
}
+void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq)
+{
+ struct ps3_private *pd = &per_cpu(ps3_private, cpu);
+
+ set_bit(63 - virq, &pd->ipi_mask);
+
+ DBG("%s:%d: cpu %u, virq %u, ipi_mask %lxh\n", __func__, __LINE__,
+ cpu, virq, pd->ipi_mask);
+}
+
static unsigned int ps3_get_irq(void)
{
struct ps3_private *pd = &__get_cpu_var(ps3_private);
BUG();
}
#endif
+
+ /* IPIs are EOIed here. */
+
+ if (test_bit(63 - plug, &pd->ipi_mask))
+ lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, plug);
+
return plug;
}
void ps3_init_IRQ(void);
void ps3_shutdown_IRQ(int cpu);
void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq);
+void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq);
/* smp */
static int ps3_smp_probe(void)
{
- return 2;
-}
+ int cpu;
-static void __init ps3_smp_setup_cpu(int cpu)
-{
- int result;
- unsigned int *virqs = per_cpu(ps3_ipi_virqs, cpu);
- int i;
+ for (cpu = 0; cpu < 2; cpu++) {
+ int result;
+ unsigned int *virqs = per_cpu(ps3_ipi_virqs, cpu);
+ int i;
- DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu);
+ DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu);
- /*
- * Check assumptions on ps3_ipi_virqs[] indexing. If this
- * check fails, then a different mapping of PPC_MSG_
- * to index needs to be setup.
- */
+ /*
+ * Check assumptions on ps3_ipi_virqs[] indexing. If this
+ * check fails, then a different mapping of PPC_MSG_
+ * to index needs to be setup.
+ */
- BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION != 0);
- BUILD_BUG_ON(PPC_MSG_RESCHEDULE != 1);
- BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2);
- BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK != 3);
+ BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION != 0);
+ BUILD_BUG_ON(PPC_MSG_RESCHEDULE != 1);
+ BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2);
+ BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK != 3);
- for (i = 0; i < MSG_COUNT; i++) {
- result = ps3_event_receive_port_setup(cpu, &virqs[i]);
+ for (i = 0; i < MSG_COUNT; i++) {
+ result = ps3_event_receive_port_setup(cpu, &virqs[i]);
- if (result)
- continue;
+ if (result)
+ continue;
- DBG("%s:%d: (%d, %d) => virq %u\n",
- __func__, __LINE__, cpu, i, virqs[i]);
+ DBG("%s:%d: (%d, %d) => virq %u\n",
+ __func__, __LINE__, cpu, i, virqs[i]);
- result = smp_request_message_ipi(virqs[i], i);
+ result = smp_request_message_ipi(virqs[i], i);
- if (result)
- virqs[i] = NO_IRQ;
- }
+ if (result)
+ virqs[i] = NO_IRQ;
+ else
+ ps3_register_ipi_irq(cpu, virqs[i]);
+ }
- ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]);
+ ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]);
- DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu);
+ DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu);
+ }
+
+ return 2;
}
void ps3_smp_cleanup_cpu(int cpu)
.probe = ps3_smp_probe,
.message_pass = ps3_smp_message_pass,
.kick_cpu = smp_generic_kick_cpu,
- .setup_cpu = ps3_smp_setup_cpu,
};
void smp_init_ps3(void)
*/
#include <linux/init.h>
-#include <linux/export.h>
+#include <linux/module.h>
#include <linux/types.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
config CRASH_DUMP
bool "kernel crash dumps"
depends on 64BIT
+ select KEXEC
help
Generate crash dump after being started by kexec.
Crash dump kernels are loaded in the main kernel with kexec-tools
if (facility_mask & CRYPT_S390_MSA && !test_facility(17))
return 0;
- if (facility_mask & CRYPT_S390_MSA3 && !test_facility(76))
+
+ if (facility_mask & CRYPT_S390_MSA3 &&
+ (!test_facility(2) || !test_facility(76)))
return 0;
- if (facility_mask & CRYPT_S390_MSA4 && !test_facility(77))
+ if (facility_mask & CRYPT_S390_MSA4 &&
+ (!test_facility(2) || !test_facility(77)))
return 0;
switch (func & CRYPT_S390_OP_MASK) {
unsigned long address, bits;
unsigned char skey;
+ if (!pte_present(*ptep))
+ return pgste;
address = pte_val(*ptep) & PAGE_MASK;
skey = page_get_storage_key(address);
bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED);
#ifdef CONFIG_PGSTE
int young;
+ if (!pte_present(*ptep))
+ return pgste;
young = page_reset_referenced(pte_val(*ptep) & PAGE_MASK);
/* Transfer page referenced bit to pte software bit (host view) */
if (young || (pgste_val(pgste) & RCP_HR_BIT))
}
-static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste)
+static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste, pte_t entry)
{
#ifdef CONFIG_PGSTE
unsigned long address;
unsigned long okey, nkey;
- address = pte_val(*ptep) & PAGE_MASK;
+ if (!pte_present(entry))
+ return;
+ address = pte_val(entry) & PAGE_MASK;
okey = nkey = page_get_storage_key(address);
nkey &= ~(_PAGE_ACC_BITS | _PAGE_FP_BIT);
/* Set page access key and fetch protection bit from pgste */
if (mm_has_pgste(mm)) {
pgste = pgste_get_lock(ptep);
- pgste_set_pte(ptep, pgste);
+ pgste_set_pte(ptep, pgste, entry);
*ptep = entry;
pgste_set_unlock(ptep, pgste);
} else
#define MACHINE_FLAG_LPAR (1UL << 12)
#define MACHINE_FLAG_SPP (1UL << 13)
#define MACHINE_FLAG_TOPOLOGY (1UL << 14)
+#define MACHINE_FLAG_STCKF (1UL << 15)
#define MACHINE_IS_VM (S390_lowcore.machine_flags & MACHINE_FLAG_VM)
#define MACHINE_IS_KVM (S390_lowcore.machine_flags & MACHINE_FLAG_KVM)
#define MACHINE_HAS_PFMF (0)
#define MACHINE_HAS_SPP (0)
#define MACHINE_HAS_TOPOLOGY (0)
+#define MACHINE_HAS_STCKF (0)
#else /* __s390x__ */
#define MACHINE_HAS_IEEE (1)
#define MACHINE_HAS_CSP (1)
#define MACHINE_HAS_PFMF (S390_lowcore.machine_flags & MACHINE_FLAG_PFMF)
#define MACHINE_HAS_SPP (S390_lowcore.machine_flags & MACHINE_FLAG_SPP)
#define MACHINE_HAS_TOPOLOGY (S390_lowcore.machine_flags & MACHINE_FLAG_TOPOLOGY)
+#define MACHINE_HAS_STCKF (S390_lowcore.machine_flags & MACHINE_FLAG_STCKF)
#endif /* __s390x__ */
#define ZFCPDUMP_HSA_SIZE (32UL<<20)
{
unsigned long long clk;
- if (test_facility(25))
+ if (MACHINE_HAS_STCKF)
asm volatile(".insn s,0xb27c0000,%0" : "=Q" (clk) : : "cc");
else
clk = get_clock();
#define __NR_clock_adjtime 337
#define __NR_syncfs 338
#define __NR_setns 339
-#define NR_syscalls 340
+#define __NR_process_vm_readv 340
+#define __NR_process_vm_writev 341
+#define NR_syscalls 342
/*
* There are some system calls that are not present on 64 bit, some
lgfr %r2,%r2 # int
lgfr %r3,%r3 # int
jg sys_setns
+
+ENTRY(compat_sys_process_vm_readv_wrapper)
+ lgfr %r2,%r2 # compat_pid_t
+ llgtr %r3,%r3 # struct compat_iovec __user *
+ llgfr %r4,%r4 # unsigned long
+ llgtr %r5,%r5 # struct compat_iovec __user *
+ llgfr %r6,%r6 # unsigned long
+ llgf %r0,164(%r15) # unsigned long
+ stg %r0,160(%r15)
+ jg sys_process_vm_readv
+
+ENTRY(compat_sys_process_vm_writev_wrapper)
+ lgfr %r2,%r2 # compat_pid_t
+ llgtr %r3,%r3 # struct compat_iovec __user *
+ llgfr %r4,%r4 # unsigned long
+ llgtr %r5,%r5 # struct compat_iovec __user *
+ llgfr %r6,%r6 # unsigned long
+ llgf %r0,164(%r15) # unsigned long
+ stg %r0,160(%r15)
+ jg sys_process_vm_writev
S390_lowcore.machine_flags |= MACHINE_FLAG_MVCOS;
if (test_facility(40))
S390_lowcore.machine_flags |= MACHINE_FLAG_SPP;
+ if (test_facility(25))
+ S390_lowcore.machine_flags |= MACHINE_FLAG_STCKF;
#endif
}
if (ipl_info.type != IPL_TYPE_FCP_DUMP)
return;
+ if (OLDMEM_BASE)
+ return;
if (console_devno != -1)
sprintf(str, " cio_ignore=all,!0.0.%04x,!0.0.%04x",
ipl_info.data.fcp.dev_id.devno, console_devno);
#ifdef CONFIG_ZFCPDUMP
- if (ipl_info.type == IPL_TYPE_FCP_DUMP) {
+ if (ipl_info.type == IPL_TYPE_FCP_DUMP && !OLDMEM_BASE) {
memory_end = ZFCPDUMP_HSA_SIZE;
memory_end_set = 1;
}
SYSCALL(sys_clock_adjtime,sys_clock_adjtime,compat_sys_clock_adjtime_wrapper)
SYSCALL(sys_syncfs,sys_syncfs,sys_syncfs_wrapper)
SYSCALL(sys_setns,sys_setns,sys_setns_wrapper)
+SYSCALL(sys_process_vm_readv,sys_process_vm_readv,compat_sys_process_vm_readv_wrapper) /* 340 */
+SYSCALL(sys_process_vm_writev,sys_process_vm_writev,compat_sys_process_vm_writev_wrapper)
return mask;
}
-static void add_cpus_to_mask(struct topology_cpu *tl_cpu,
- struct mask_info *book, struct mask_info *core)
+static struct mask_info *add_cpus_to_mask(struct topology_cpu *tl_cpu,
+ struct mask_info *book,
+ struct mask_info *core,
+ int z10)
{
unsigned int cpu;
cpu_book_id[lcpu] = book->id;
#endif
cpumask_set_cpu(lcpu, &core->mask);
- cpu_core_id[lcpu] = core->id;
+ if (z10) {
+ cpu_core_id[lcpu] = rcpu;
+ core = core->next;
+ } else {
+ cpu_core_id[lcpu] = core->id;
+ }
smp_cpu_polarization[lcpu] = tl_cpu->pp;
}
}
+ return core;
}
static void clear_masks(void)
{
#ifdef CONFIG_SCHED_BOOK
struct mask_info *book = &book_info;
+ struct cpuid cpu_id;
#else
struct mask_info *book = NULL;
#endif
struct mask_info *core = &core_info;
union topology_entry *tle, *end;
+ int z10 = 0;
-
+#ifdef CONFIG_SCHED_BOOK
+ get_cpu_id(&cpu_id);
+ z10 = cpu_id.machine == 0x2097 || cpu_id.machine == 0x2098;
+#endif
spin_lock_irq(&topology_lock);
clear_masks();
tle = info->tle;
end = (union topology_entry *)((unsigned long)info + info->length);
while (tle < end) {
+#ifdef CONFIG_SCHED_BOOK
+ if (z10) {
+ switch (tle->nl) {
+ case 1:
+ book = book->next;
+ book->id = tle->container.id;
+ break;
+ case 0:
+ core = add_cpus_to_mask(&tle->cpu, book, core, z10);
+ break;
+ default:
+ clear_masks();
+ goto out;
+ }
+ tle = next_tle(tle);
+ continue;
+ }
+#endif
switch (tle->nl) {
#ifdef CONFIG_SCHED_BOOK
case 2:
core->id = tle->container.id;
break;
case 0:
- add_cpus_to_mask(&tle->cpu, book, core);
+ add_cpus_to_mask(&tle->cpu, book, core, z10);
break;
default:
clear_masks();
for (i = 0; i < TOPOLOGY_NR_MAG; i++)
printk(" %d", info->mag[i]);
printk(" / %d\n", info->mnest);
- alloc_masks(info, &core_info, 2);
+ alloc_masks(info, &core_info, 1);
#ifdef CONFIG_SCHED_BOOK
- alloc_masks(info, &book_info, 3);
+ alloc_masks(info, &book_info, 2);
#endif
}
NOTES :text :note
+ .dummy : { *(.dummy) } :data
+
RODATA
#ifdef CONFIG_SHARED_KERNEL
} else {
/* Completion interrupt was faster than initial
* interrupt. Set pfault_wait to -1 so the initial
- * interrupt doesn't put the task to sleep. */
- tsk->thread.pfault_wait = -1;
+ * interrupt doesn't put the task to sleep.
+ * If the task is not running, ignore the completion
+ * interrupt since it must be a leftover of a PFAULT
+ * CANCEL operation which didn't remove all pending
+ * completion interrupts. */
+ if (tsk->state == TASK_RUNNING)
+ tsk->thread.pfault_wait = -1;
}
put_task_struct(tsk);
} else {
if (!arch_get_random_long(&v))
break;
- memcpy(buf, &v, chunk);
+ memcpy(p, &v, chunk);
p += chunk;
nbytes -= chunk;
}
}
/**
- * dmi_name_in_vendors - Check if string is anywhere in the DMI vendor information.
+ * dmi_name_in_vendors - Check if string is in the DMI system or board vendor name
* @str: Case sensitive Name
*/
int dmi_name_in_vendors(const char *str)
{
- static int fields[] = { DMI_BIOS_VENDOR, DMI_BIOS_VERSION, DMI_SYS_VENDOR,
- DMI_PRODUCT_NAME, DMI_PRODUCT_VERSION, DMI_BOARD_VENDOR,
- DMI_BOARD_NAME, DMI_BOARD_VERSION, DMI_NONE };
+ static int fields[] = { DMI_SYS_VENDOR, DMI_BOARD_VENDOR, DMI_NONE };
int i;
for (i = 0; fields[i] != DMI_NONE; i++) {
int f = fields[i];
return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0;
}
-#define MOD_REG_BIT(reg, bit_mask, set) \
-do { \
- int l = __raw_readl(base + reg); \
- if (set) l |= bit_mask; \
- else l &= ~bit_mask; \
- __raw_writel(l, base + reg); \
-} while(0)
+static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
+{
+ int l = __raw_readl(base + reg);
+
+ if (set)
+ l |= mask;
+ else
+ l &= ~mask;
+
+ __raw_writel(l, base + reg);
+}
/**
* _set_gpio_debounce - low level gpio debounce time
u32 gpio_bit = 1 << gpio;
if (cpu_is_omap44xx()) {
- MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_LOW);
- MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_HIGH);
- MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_RISING);
- MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_FALLING);
+ _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT0, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_LOW);
+ _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT1, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_HIGH);
+ _gpio_rmw(base, OMAP4_GPIO_RISINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_RISING);
+ _gpio_rmw(base, OMAP4_GPIO_FALLINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_FALLING);
} else {
- MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_LOW);
- MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_HIGH);
- MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_RISING);
- MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_FALLING);
+ _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_LOW);
+ _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_HIGH);
+ _gpio_rmw(base, OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_RISING);
+ _gpio_rmw(base, OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_FALLING);
}
if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
if (cpu_is_omap44xx()) {
- MOD_REG_BIT(OMAP4_GPIO_IRQWAKEN0, gpio_bit,
- trigger != 0);
+ _gpio_rmw(base, OMAP4_GPIO_IRQWAKEN0, gpio_bit,
+ trigger != 0);
} else {
/*
* GPIO wakeup request can only be generated on edge
gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
handle_simple_irq);
+ if (!gc) {
+ dev_err(bank->dev, "Memory alloc failed for gc\n");
+ return;
+ }
+
ct = gc->chip_types;
/* NOTE: No ack required, reading IRQ status clears it. */
/* set platform specific polarity inversion */
ret = pca953x_write_reg(chip, PCA953X_INVERT, invert);
- if (ret)
- goto out;
- return 0;
out:
return ret;
}
struct pca953x_platform_data *pdata;
struct pca953x_chip *chip;
int irq_base=0, invert=0;
- int ret = 0;
+ int ret;
chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
if (chip == NULL)
pca953x_setup_gpio(chip, id->driver_data & PCA_GPIO_MASK);
if (chip->chip_type == PCA953X_TYPE)
- device_pca953x_init(chip, invert);
- else if (chip->chip_type == PCA957X_TYPE)
- device_pca957x_init(chip, invert);
+ ret = device_pca953x_init(chip, invert);
else
+ ret = device_pca957x_init(chip, invert);
+ if (ret)
goto out_failed;
ret = pca953x_irq_setup(chip, id, irq_base);
/* Prevent vblank irq processing while disabling vblank irqs,
* so no updates of timestamps or count can happen after we've
* disabled. Needed to prevent races in case of delayed irq's.
- * Disable preemption, so vblank_time_lock is held as short as
- * possible, even under a kernel with PREEMPT_RT patches.
*/
- preempt_disable();
spin_lock_irqsave(&dev->vblank_time_lock, irqflags);
dev->driver->disable_vblank(dev, crtc);
clear_vblank_timestamps(dev, crtc);
spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags);
- preempt_enable();
}
static void vblank_disable_fn(unsigned long arg)
spin_lock_irqsave(&dev->vbl_lock, irqflags);
/* Going from 0->1 means we have to enable interrupts again */
if (atomic_add_return(1, &dev->vblank_refcount[crtc]) == 1) {
- /* Disable preemption while holding vblank_time_lock. Do
- * it explicitely to guard against PREEMPT_RT kernel.
- */
- preempt_disable();
spin_lock_irqsave(&dev->vblank_time_lock, irqflags2);
if (!dev->vblank_enabled[crtc]) {
/* Enable vblank irqs under vblank_time_lock protection.
}
}
spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags2);
- preempt_enable();
} else {
if (!dev->vblank_enabled[crtc]) {
atomic_dec(&dev->vblank_refcount[crtc]);
for (i = 0; i < num_indices; i++) {
gpio = &i2c_info->asGPIO_Info[i];
+ /* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */
+ if ((rdev->family == CHIP_R420) ||
+ (rdev->family == CHIP_R423) ||
+ (rdev->family == CHIP_RV410)) {
+ if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) ||
+ (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) ||
+ (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) {
+ gpio->ucClkMaskShift = 0x19;
+ gpio->ucDataMaskShift = 0x18;
+ }
+ }
+
/* some evergreen boards have bad data for this entry */
if (ASIC_IS_DCE4(rdev)) {
if ((i == 7) &&
return state_index;
/* last mode is usually default, array is low to high */
for (i = 0; i < num_modes; i++) {
+ rdev->pm.power_state[state_index].clock_info =
+ kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
+ if (!rdev->pm.power_state[state_index].clock_info)
+ return state_index;
+ rdev->pm.power_state[state_index].num_clock_modes = 1;
rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
switch (frev) {
case 1:
- rdev->pm.power_state[state_index].clock_info =
- kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
- if (!rdev->pm.power_state[state_index].clock_info)
- return state_index;
- rdev->pm.power_state[state_index].num_clock_modes = 1;
rdev->pm.power_state[state_index].clock_info[0].mclk =
le16_to_cpu(power_info->info.asPowerPlayInfo[i].usMemoryClock);
rdev->pm.power_state[state_index].clock_info[0].sclk =
state_index++;
break;
case 2:
- rdev->pm.power_state[state_index].clock_info =
- kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
- if (!rdev->pm.power_state[state_index].clock_info)
- return state_index;
- rdev->pm.power_state[state_index].num_clock_modes = 1;
rdev->pm.power_state[state_index].clock_info[0].mclk =
le32_to_cpu(power_info->info_2.asPowerPlayInfo[i].ulMemoryClock);
rdev->pm.power_state[state_index].clock_info[0].sclk =
state_index++;
break;
case 3:
- rdev->pm.power_state[state_index].clock_info =
- kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
- if (!rdev->pm.power_state[state_index].clock_info)
- return state_index;
- rdev->pm.power_state[state_index].num_clock_modes = 1;
rdev->pm.power_state[state_index].clock_info[0].mclk =
le32_to_cpu(power_info->info_3.asPowerPlayInfo[i].ulMemoryClock);
rdev->pm.power_state[state_index].clock_info[0].sclk =
while (new_bus) {
new_bridge = new_bus->self;
- if (new_bridge) {
- /* go through list of devices already registered */
- list_for_each_entry(same_bridge_vgadev, &vga_list, list) {
- bus = same_bridge_vgadev->pdev->bus;
- bridge = bus->self;
-
- /* see if the share a bridge with this device */
- if (new_bridge == bridge) {
- /* if their direct parent bridge is the same
- as any bridge of this device then it can't be used
- for that device */
- same_bridge_vgadev->bridge_has_one_vga = false;
- }
+ /* go through list of devices already registered */
+ list_for_each_entry(same_bridge_vgadev, &vga_list, list) {
+ bus = same_bridge_vgadev->pdev->bus;
+ bridge = bus->self;
+
+ /* see if the share a bridge with this device */
+ if (new_bridge == bridge) {
+ /* if their direct parent bridge is the same
+ as any bridge of this device then it can't be used
+ for that device */
+ same_bridge_vgadev->bridge_has_one_vga = false;
+ }
- /* now iterate the previous devices bridge hierarchy */
- /* if the new devices parent bridge is in the other devices
- hierarchy then we can't use it to control this device */
- while (bus) {
- bridge = bus->self;
- if (bridge) {
- if (bridge == vgadev->pdev->bus->self)
- vgadev->bridge_has_one_vga = false;
- }
- bus = bus->parent;
+ /* now iterate the previous devices bridge hierarchy */
+ /* if the new devices parent bridge is in the other devices
+ hierarchy then we can't use it to control this device */
+ while (bus) {
+ bridge = bus->self;
+ if (bridge) {
+ if (bridge == vgadev->pdev->bus->self)
+ vgadev->bridge_has_one_vga = false;
}
+ bus = bus->parent;
}
}
new_bus = new_bus->parent;
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
del_timer_sync(&led_cdev->blink_timer);
if (led_cdev->blink_set &&
- !led_cdev->blink_set(led_cdev, delay_on, delay_off)) {
- led_cdev->blink_delay_on = *delay_on;
- led_cdev->blink_delay_off = *delay_off;
+ !led_cdev->blink_set(led_cdev, delay_on, delay_off))
return;
- }
/* blink with 1 Hz as default if nothing specified */
if (!*delay_on && !*delay_off)
/* CTL-CPLD Version Register */
#define CTL_CPLD_VERSION 0x2000
-static int fpga_of_probe(struct platform_device *op,
- const struct of_device_id *match)
+static int fpga_of_probe(struct platform_device *op)
{
struct device_node *of_node = op->dev.of_node;
struct device *this_device;
{},
};
-static struct of_platform_driver fpga_of_driver = {
+static struct platform_driver fpga_of_driver = {
.probe = fpga_of_probe,
.remove = fpga_of_remove,
.driver = {
static int __init fpga_init(void)
{
led_trigger_register_simple("fpga", &ledtrig_fpga);
- return of_register_platform_driver(&fpga_of_driver);
+ return platform_driver_register(&fpga_of_driver);
}
static void __exit fpga_exit(void)
{
- of_unregister_platform_driver(&fpga_of_driver);
+ platform_driver_unregister(&fpga_of_driver);
led_trigger_unregister_simple(ledtrig_fpga);
}
return true;
}
-static int data_of_probe(struct platform_device *op,
- const struct of_device_id *match)
+static int data_of_probe(struct platform_device *op)
{
struct device_node *of_node = op->dev.of_node;
struct device *this_device;
{},
};
-static struct of_platform_driver data_of_driver = {
+static struct platform_driver data_of_driver = {
.probe = data_of_probe,
.remove = data_of_remove,
.driver = {
static int __init data_init(void)
{
- return of_register_platform_driver(&data_of_driver);
+ return platform_driver_register(&data_of_driver);
}
static void __exit data_exit(void)
{
- of_unregister_platform_driver(&data_of_driver);
+ platform_driver_unregister(&data_of_driver);
}
MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
config EEPROM_DIGSY_MTC_CFG
bool "DigsyMTC display configuration EEPROMs device"
- depends on PPC_MPC5200_GPIO && GPIOLIB && SPI_GPIO
+ depends on GPIO_MPC5200 && SPI_GPIO
help
This option enables access to display configuration EEPROMs
on digsy_mtc board. You have to additionally select Microwire
# PINCTRL infrastructure and drivers
#
-menuconfig PINCTRL
- bool "PINCTRL Support"
+config PINCTRL
+ bool
depends on EXPERIMENTAL
- help
- This enables the PINCTRL subsystem for controlling pins
- on chip packages, for example multiplexing pins on primarily
- PGA and BGA packages for systems on chip.
-
- If unsure, say N.
if PINCTRL
+menu "Pin controllers"
+ depends on PINCTRL
+
config PINMUX
bool "Support pinmux controllers"
- help
- Say Y here if you want the pincontrol subsystem to handle pin
- multiplexing drivers.
config DEBUG_PINCTRL
bool "Debug PINCTRL calls"
bool "CSR SiRFprimaII pinmux driver"
depends on ARCH_PRIMA2
select PINMUX
- help
- Say Y here to enable the SiRFprimaII pinmux driver
config PINMUX_U300
bool "U300 pinmux driver"
depends on ARCH_U300
select PINMUX
- help
- Say Y here to enable the U300 pinmux driver
+
+endmenu
endif
.update_status = dell_send_intensity,
};
-static void touchpad_led_on()
+static void touchpad_led_on(void)
{
int command = 0x97;
char data = 1;
i8042_command(&data, command | 1 << 12);
}
-static void touchpad_led_off()
+static void touchpad_led_off(void)
{
int command = 0x97;
char data = 2;
if (ipl_info.type != IPL_TYPE_FCP_DUMP)
return -ENODATA;
+ if (OLDMEM_BASE)
+ return -ENODATA;
zcore_dbf = debug_register("zcore", 4, 1, 4 * sizeof(long));
debug_register_view(zcore_dbf, &debug_sprintf_view);
}
/**
- * ap_schedule_poll_timer(): Schedule poll timer.
+ * __ap_schedule_poll_timer(): Schedule poll timer.
*
* Set up the timer to run the poll tasklet
*/
-static inline void ap_schedule_poll_timer(void)
+static inline void __ap_schedule_poll_timer(void)
{
ktime_t hr_time;
spin_lock_bh(&ap_poll_timer_lock);
- if (ap_using_interrupts() || ap_suspend_flag)
- goto out;
- if (hrtimer_is_queued(&ap_poll_timer))
+ if (hrtimer_is_queued(&ap_poll_timer) || ap_suspend_flag)
goto out;
if (ktime_to_ns(hrtimer_expires_remaining(&ap_poll_timer)) <= 0) {
hr_time = ktime_set(0, poll_timeout);
spin_unlock_bh(&ap_poll_timer_lock);
}
+/**
+ * ap_schedule_poll_timer(): Schedule poll timer.
+ *
+ * Set up the timer to run the poll tasklet
+ */
+static inline void ap_schedule_poll_timer(void)
+{
+ if (ap_using_interrupts())
+ return;
+ __ap_schedule_poll_timer();
+}
+
/**
* ap_poll_read(): Receive pending reply messages from an AP device.
* @ap_dev: pointer to the AP device
*flags |= 1;
*flags |= 2;
break;
- case AP_RESPONSE_Q_FULL:
case AP_RESPONSE_RESET_IN_PROGRESS:
+ __ap_schedule_poll_timer();
+ case AP_RESPONSE_Q_FULL:
*flags |= 2;
break;
case AP_RESPONSE_MESSAGE_TOO_BIG:
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
+#include <linux/pci-aspm.h>
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
unique_id++;
}
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+ PCIE_LINK_STATE_CLKPM);
+
error = pci_enable_device(pdev);
if (error)
goto out;
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/pci.h>
+#include <linux/pci-aspm.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
return -ENODEV;
}
+
+ pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
+ PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
+
err = pci_enable_device(h->pdev);
if (err) {
dev_warn(&h->pdev->dev, "unable to enable PCI device\n");
if (ioc->is_driver_loading)
return;
+
+ fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+ if (!fw_event)
+ return;
+
fw_event->event = MPT2SAS_REMOVE_UNRESPONDING_DEVICES;
fw_event->ioc = ioc;
_scsih_fw_event_add(ioc, fw_event);
blk_start_request(req);
+ scmd_printk(KERN_INFO, cmd, "killing request\n");
+
sdev = cmd->device;
starget = scsi_target(sdev);
shost = sdev->host;
struct request *req;
if (!sdev) {
- printk("scsi: killing requests for dead queue\n");
while ((req = blk_peek_request(q)) != NULL)
scsi_kill_request(req, q);
return;
return sdev;
out_device_destroy:
- scsi_device_set_state(sdev, SDEV_DEL);
- transport_destroy_device(&sdev->sdev_gendev);
- put_device(&sdev->sdev_dev);
- scsi_free_queue(sdev->request_queue);
- put_device(&sdev->sdev_gendev);
+ __scsi_remove_device(sdev);
out:
if (display_failure_msg)
printk(ALLOC_FAILURE_MSG, __func__);
#include "as102_fw.h"
#include "dvbdev.h"
-int debug;
-module_param_named(debug, debug, int, 0644);
+int as102_debug;
+module_param_named(debug, as102_debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off debugging (default: off)");
int dual_tuner;
#define DRIVER_FULL_NAME "Abilis Systems as10x usb driver"
#define DRIVER_NAME "as10x_usb"
-extern int debug;
+extern int as102_debug;
+#define debug as102_debug
#define dprintk(debug, args...) \
do { if (debug) { \
CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64;
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i;
- hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page) + fs->page_offset));
+ hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page.p) + fs->page_offset));
hw_buffer.s.size = fs->size;
CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64;
}
static inline enum usb_device_speed portscx_device_speed(u32 reg)
{
- switch (speed & PORTSCX_PORT_SPEED_MASK) {
+ switch (reg & PORTSCX_PORT_SPEED_MASK) {
case PORTSCX_PORT_SPEED_HIGH:
return USB_SPEED_HIGH;
case PORTSCX_PORT_SPEED_FULL:
src = in->name;
srclen = in->len;
+ if (srclen > HFS_NAMELEN)
+ srclen = HFS_NAMELEN;
dst = out;
dstlen = HFS_MAX_NAMELEN;
if (nls_io) {
*/
#define radeon_PCI_IDS \
{0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x3151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3154, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3155, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x4C64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
{0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
{0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4C6E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \
{0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
#else
+struct pinctrl_dev;
/* Sufficiently stupid default function when pinctrl is not in use */
static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin)
struct irq_desc *desc;
int i, ok = 0;
- if (atomic_inc_return(&irq_poll_active) == 1)
+ if (atomic_inc_return(&irq_poll_active) != 1)
goto out;
irq_poll_cpu = smp_processor_id();
* anon_vma prepared.
*/
if (unlikely(anon_vma_prepare(vma))) {
+ page_cache_release(new_page);
+ page_cache_release(old_page);
/* Caller expects lock to be held */
spin_lock(&mm->page_table_lock);
return VM_FAULT_OOM;
if (!p)
return 0;
+ if (p->signal->oom_score_adj == OOM_SCORE_ADJ_MIN) {
+ task_unlock(p);
+ return 0;
+ }
+
/*
* The memory controller may have a limit of 0 bytes, so avoid a divide
* by zero, if necessary.
# Makefile for encrypted keys
#
-obj-$(CONFIG_ENCRYPTED_KEYS) += encrypted.o ecryptfs_format.o
-obj-$(CONFIG_TRUSTED_KEYS) += masterkey_trusted.o
+obj-$(CONFIG_ENCRYPTED_KEYS) += encrypted-keys.o
+
+encrypted-keys-y := encrypted.o ecryptfs_format.o
+masterkey-$(CONFIG_TRUSTED_KEYS) := masterkey_trusted.o
+masterkey-$(CONFIG_TRUSTED_KEYS)-$(CONFIG_ENCRYPTED_KEYS) := masterkey_trusted.o
+encrypted-keys-y += $(masterkey-y) $(masterkey-m-m)
goto out;
if (IS_ERR(mkey)) {
- int ret = PTR_ERR(epayload);
+ int ret = PTR_ERR(mkey);
if (ret == -ENOTSUPP)
pr_info("encrypted_key: key %s not supported",
#define __ENCRYPTED_KEY_H
#define ENCRYPTED_DEBUG 0
-#ifdef CONFIG_TRUSTED_KEYS
+#if defined(CONFIG_TRUSTED_KEYS) || \
+ (defined(CONFIG_TRUSTED_KEYS_MODULE) && defined(CONFIG_ENCRYPTED_KEYS_MODULE))
extern struct key *request_trusted_key(const char *trusted_desc,
u8 **master_key, size_t *master_keylen);
#else
key->expiry = 0;
}
- kfree_rcu(zap, rcu);
+ if (zap)
+ kfree_rcu(zap, rcu);
error:
return ret;
const char *smack_cipso_option = SMACK_CIPSO_OPTION;
-
-#define SEQ_READ_FINISHED ((loff_t)-1)
-
/*
* Values for parsing cipso rules
* SMK_DIGITLEN: Length of a digit field in a rule.
rc = count;
/*
+ * If this is "load" as opposed to "load-self" and a new rule
+ * it needs to get added for reporting.
* smk_set_access returns true if there was already a rule
* for the subject/object pair, and false if it was new.
*/
- if (!smk_set_access(rule, rule_list, rule_lock)) {
+ if (load && !smk_set_access(rule, rule_list, rule_lock)) {
smlp = kzalloc(sizeof(*smlp), GFP_KERNEL);
if (smlp != NULL) {
smlp->smk_rule = rule;
return rc;
}
-
/*
- * Seq_file read operations for /smack/load
+ * Core logic for smackfs seq list operations.
*/
-static void *load_seq_start(struct seq_file *s, loff_t *pos)
+static void *smk_seq_start(struct seq_file *s, loff_t *pos,
+ struct list_head *head)
{
struct list_head *list;
* This is 0 the first time through.
*/
if (s->index == 0)
- s->private = &smack_rule_list;
+ s->private = head;
if (s->private == NULL)
return NULL;
return list;
}
-static void *load_seq_next(struct seq_file *s, void *v, loff_t *pos)
+static void *smk_seq_next(struct seq_file *s, void *v, loff_t *pos,
+ struct list_head *head)
{
struct list_head *list = v;
- if (list_is_last(list, &smack_rule_list)) {
+ if (list_is_last(list, head)) {
s->private = NULL;
return NULL;
}
return list->next;
}
+static void smk_seq_stop(struct seq_file *s, void *v)
+{
+ /* No-op */
+}
+
+/*
+ * Seq_file read operations for /smack/load
+ */
+
+static void *load_seq_start(struct seq_file *s, loff_t *pos)
+{
+ return smk_seq_start(s, pos, &smack_rule_list);
+}
+
+static void *load_seq_next(struct seq_file *s, void *v, loff_t *pos)
+{
+ return smk_seq_next(s, v, pos, &smack_rule_list);
+}
+
static int load_seq_show(struct seq_file *s, void *v)
{
struct list_head *list = v;
return 0;
}
-static void load_seq_stop(struct seq_file *s, void *v)
-{
- /* No-op */
-}
-
static const struct seq_operations load_seq_ops = {
.start = load_seq_start,
.next = load_seq_next,
.show = load_seq_show,
- .stop = load_seq_stop,
+ .stop = smk_seq_stop,
};
/**
static void *cipso_seq_start(struct seq_file *s, loff_t *pos)
{
- if (*pos == SEQ_READ_FINISHED)
- return NULL;
- if (list_empty(&smack_known_list))
- return NULL;
-
- return smack_known_list.next;
+ return smk_seq_start(s, pos, &smack_known_list);
}
static void *cipso_seq_next(struct seq_file *s, void *v, loff_t *pos)
{
- struct list_head *list = v;
-
- /*
- * labels with no associated cipso value wont be printed
- * in cipso_seq_show
- */
- if (list_is_last(list, &smack_known_list)) {
- *pos = SEQ_READ_FINISHED;
- return NULL;
- }
-
- return list->next;
+ return smk_seq_next(s, v, pos, &smack_known_list);
}
/*
return 0;
}
-static void cipso_seq_stop(struct seq_file *s, void *v)
-{
- /* No-op */
-}
-
static const struct seq_operations cipso_seq_ops = {
.start = cipso_seq_start,
- .stop = cipso_seq_stop,
.next = cipso_seq_next,
.show = cipso_seq_show,
+ .stop = smk_seq_stop,
};
/**
static void *netlbladdr_seq_start(struct seq_file *s, loff_t *pos)
{
- if (*pos == SEQ_READ_FINISHED)
- return NULL;
- if (list_empty(&smk_netlbladdr_list))
- return NULL;
- return smk_netlbladdr_list.next;
+ return smk_seq_start(s, pos, &smk_netlbladdr_list);
}
static void *netlbladdr_seq_next(struct seq_file *s, void *v, loff_t *pos)
{
- struct list_head *list = v;
-
- if (list_is_last(list, &smk_netlbladdr_list)) {
- *pos = SEQ_READ_FINISHED;
- return NULL;
- }
-
- return list->next;
+ return smk_seq_next(s, v, pos, &smk_netlbladdr_list);
}
#define BEBITS (sizeof(__be32) * 8)
return 0;
}
-static void netlbladdr_seq_stop(struct seq_file *s, void *v)
-{
- /* No-op */
-}
-
static const struct seq_operations netlbladdr_seq_ops = {
.start = netlbladdr_seq_start,
- .stop = netlbladdr_seq_stop,
.next = netlbladdr_seq_next,
.show = netlbladdr_seq_show,
+ .stop = smk_seq_stop,
};
/**
{
struct task_smack *tsp = current_security();
- if (*pos == SEQ_READ_FINISHED)
- return NULL;
- if (list_empty(&tsp->smk_rules))
- return NULL;
- return tsp->smk_rules.next;
+ return smk_seq_start(s, pos, &tsp->smk_rules);
}
static void *load_self_seq_next(struct seq_file *s, void *v, loff_t *pos)
{
struct task_smack *tsp = current_security();
- struct list_head *list = v;
- if (list_is_last(list, &tsp->smk_rules)) {
- *pos = SEQ_READ_FINISHED;
- return NULL;
- }
- return list->next;
+ return smk_seq_next(s, v, pos, &tsp->smk_rules);
}
static int load_self_seq_show(struct seq_file *s, void *v)
return 0;
}
-static void load_self_seq_stop(struct seq_file *s, void *v)
-{
- /* No-op */
-}
-
static const struct seq_operations load_self_seq_ops = {
.start = load_self_seq_start,
.next = load_self_seq_next,
.show = load_self_seq_show,
- .stop = load_self_seq_stop,
+ .stop = smk_seq_stop,
};
buf + ELD_FIXED_BYTES + mnl + 3 * i);
}
+ /*
+ * HDMI sink's ELD info cannot always be retrieved for now, e.g.
+ * in console or for audio devices. Assume the highest speakers
+ * configuration, to _not_ prohibit multi-channel audio playback.
+ */
+ if (!e->spk_alloc)
+ e->spk_alloc = 0xffff;
+
+ e->eld_valid = true;
return 0;
out_fail:
- e->eld_ver = 0;
return -EINVAL;
}
* ELD is valid, actual eld_size is assigned in hdmi_update_eld()
*/
- if (!eld->eld_valid)
- return -ENOENT;
-
size = snd_hdmi_get_eld_size(codec, nid);
if (size == 0) {
/* wfg: workaround for ASUS P5E-VM HDMI board */
int spk_alloc;
int sad_count;
struct cea_sad sad[ELD_MAX_SAD];
+ /*
+ * all fields above eld_buffer will be cleared before updating ELD
+ */
char eld_buffer[ELD_MAX_SIZE];
#ifdef CONFIG_PROC_FS
struct snd_info_entry *proc_entry;
return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout);
}
+static void cs_update_input_select(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ if (spec->cur_adc)
+ snd_hda_codec_write(codec, spec->cur_adc, 0,
+ AC_VERB_SET_CONNECT_SEL,
+ spec->adc_idx[spec->cur_input]);
+}
+
/*
* Analog capture
*/
spec->cur_adc = spec->adc_nid[spec->cur_input];
spec->cur_adc_stream_tag = stream_tag;
spec->cur_adc_format = format;
+ cs_update_input_select(codec);
snd_hda_codec_setup_stream(codec, spec->cur_adc, stream_tag, 0, format);
return 0;
}
spec->cur_adc_stream_tag, 0,
spec->cur_adc_format);
}
- snd_hda_codec_write(codec, spec->cur_adc, 0,
- AC_VERB_SET_CONNECT_SEL,
- spec->adc_idx[idx]);
spec->cur_input = idx;
+ cs_update_input_select(codec);
return 1;
}
} else {
spec->cur_input = spec->last_input;
}
-
- snd_hda_codec_write_cache(codec, spec->cur_adc, 0,
- AC_VERB_SET_CONNECT_SEL,
- spec->adc_idx[spec->cur_input]);
+ cs_update_input_select(codec);
} else {
if (present)
change_cur_input(codec, spec->automic_idx, 0);
cs_automic(codec);
else {
spec->cur_adc = spec->adc_nid[spec->cur_input];
- snd_hda_codec_write(codec, spec->cur_adc, 0,
- AC_VERB_SET_CONNECT_SEL,
- spec->adc_idx[spec->cur_input]);
+ cs_update_input_select(codec);
}
} else {
change_cur_input(codec, spec->cur_input, 1);
hda_nid_t pin_nid;
int num_mux_nids;
hda_nid_t mux_nids[HDA_MAX_CONNECTIONS];
+
+ struct hda_codec *codec;
struct hdmi_eld sink_eld;
+ struct delayed_work work;
};
struct hdmi_spec {
* Unsolicited events
*/
-static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
- struct hdmi_eld *eld);
+static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry);
static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
{
int pd = !!(res & AC_UNSOL_RES_PD);
int eldv = !!(res & AC_UNSOL_RES_ELDV);
int pin_idx;
- struct hdmi_eld *eld;
printk(KERN_INFO
"HDMI hot plug event: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
pin_idx = pin_nid_to_pin_index(spec, pin_nid);
if (pin_idx < 0)
return;
- eld = &spec->pins[pin_idx].sink_eld;
-
- hdmi_present_sense(codec, pin_nid, eld);
- /*
- * HDMI sink's ELD info cannot always be retrieved for now, e.g.
- * in console or for audio devices. Assume the highest speakers
- * configuration, to _not_ prohibit multi-channel audio playback.
- */
- if (!eld->spk_alloc)
- eld->spk_alloc = 0xffff;
+ hdmi_present_sense(&spec->pins[pin_idx], true);
}
static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res)
return 0;
}
-static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
- struct hdmi_eld *eld)
+static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry)
{
+ struct hda_codec *codec = per_pin->codec;
+ struct hdmi_eld *eld = &per_pin->sink_eld;
+ hda_nid_t pin_nid = per_pin->pin_nid;
/*
* Always execute a GetPinSense verb here, even when called from
* hdmi_intrinsic_event; for some NVIDIA HW, the unsolicited
* the unsolicited response to avoid custom WARs.
*/
int present = snd_hda_pin_sense(codec, pin_nid);
+ bool eld_valid = false;
- memset(eld, 0, sizeof(*eld));
+ memset(eld, 0, offsetof(struct hdmi_eld, eld_buffer));
eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE);
if (eld->monitor_present)
- eld->eld_valid = !!(present & AC_PINSENSE_ELDV);
- else
- eld->eld_valid = 0;
+ eld_valid = !!(present & AC_PINSENSE_ELDV);
printk(KERN_INFO
"HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
- codec->addr, pin_nid, eld->monitor_present, eld->eld_valid);
+ codec->addr, pin_nid, eld->monitor_present, eld_valid);
- if (eld->eld_valid)
+ if (eld_valid) {
if (!snd_hdmi_get_eld(eld, codec, pin_nid))
snd_hdmi_show_eld(eld);
+ else if (retry) {
+ queue_delayed_work(codec->bus->workq,
+ &per_pin->work,
+ msecs_to_jiffies(300));
+ }
+ }
snd_hda_input_jack_report(codec, pin_nid);
}
+static void hdmi_repoll_eld(struct work_struct *work)
+{
+ struct hdmi_spec_per_pin *per_pin =
+ container_of(to_delayed_work(work), struct hdmi_spec_per_pin, work);
+
+ hdmi_present_sense(per_pin, false);
+}
+
static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid)
{
struct hdmi_spec *spec = codec->spec;
if (err < 0)
return err;
- hdmi_present_sense(codec, per_pin->pin_nid, &per_pin->sink_eld);
+ hdmi_present_sense(per_pin, false);
return 0;
}
AC_VERB_SET_UNSOLICITED_ENABLE,
AC_USRSP_EN | pin_nid);
+ per_pin->codec = codec;
+ INIT_DELAYED_WORK(&per_pin->work, hdmi_repoll_eld);
snd_hda_eld_proc_new(codec, eld, pin_idx);
}
return 0;
struct hdmi_spec_per_pin *per_pin = &spec->pins[pin_idx];
struct hdmi_eld *eld = &per_pin->sink_eld;
+ cancel_delayed_work(&per_pin->work);
snd_hda_eld_proc_free(codec, eld);
}
snd_hda_input_jack_free(codec);
+ flush_workqueue(codec->bus->workq);
kfree(spec);
}
switch (fix->type) {
case ALC_FIXUP_SKU:
if (action != ALC_FIXUP_ACT_PRE_PROBE || !fix->v.sku)
- break;;
+ break;
snd_printdd(KERN_INFO "hda_codec: %s: "
"Apply sku override for %s\n",
codec->chip_name, modelname);
/* power management */
unsigned int num_pwrs;
- const unsigned int *pwr_mapping;
const hda_nid_t *pwr_nids;
const hda_nid_t *dac_list;
#define STAC92HD83_DAC_COUNT 3
-static const hda_nid_t stac92hd83xxx_pwr_nids[4] = {
- 0xa, 0xb, 0xd, 0xe,
+static const hda_nid_t stac92hd83xxx_pwr_nids[7] = {
+ 0x0a, 0x0b, 0x0c, 0xd, 0x0e,
+ 0x0f, 0x10
};
static const hda_nid_t stac92hd83xxx_slave_dig_outs[2] = {
0x1e, 0,
};
-static const unsigned int stac92hd83xxx_pwr_mapping[4] = {
- 0x03, 0x0c, 0x20, 0x40,
-};
-
static const hda_nid_t stac92hd83xxx_dmic_nids[] = {
0x11, 0x20,
};
stac_toggle_power_map(codec, nid, 1);
continue;
}
- if (enable_pin_detect(codec, nid, STAC_PWR_EVENT))
+ if (enable_pin_detect(codec, nid, STAC_PWR_EVENT)) {
stac_issue_unsol_event(codec, nid);
+ continue;
+ }
+ /* none of the above, turn the port OFF */
+ stac_toggle_power_map(codec, nid, 0);
}
/* sync mute LED */
if (idx >= spec->num_pwrs)
return;
- /* several codecs have two power down bits */
- if (spec->pwr_mapping)
- idx = spec->pwr_mapping[idx];
- else
- idx = 1 << idx;
+ idx = 1 << idx;
val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0) & 0xff;
if (enable)
snd_hda_codec_set_pincfg(codec, 0xf, 0x2181205e);
}
- /* reset pin power-down; Windows may leave these bits after reboot */
- snd_hda_codec_write_cache(codec, codec->afg, 0, 0x7EC, 0);
- snd_hda_codec_write_cache(codec, codec->afg, 0, 0x7ED, 0);
codec->no_trigger_sense = 1;
codec->spec = spec;
codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs;
spec->digbeep_nid = 0x21;
spec->pwr_nids = stac92hd83xxx_pwr_nids;
- spec->pwr_mapping = stac92hd83xxx_pwr_mapping;
spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids);
spec->multiout.dac_nids = spec->dac_nids;
spec->init = stac92hd83xxx_core_init;
stac92xx_set_config_regs(codec,
stac92hd83xxx_brd_tbl[spec->board_config]);
- if (spec->board_config != STAC_92HD83XXX_PWR_REF)
- spec->num_pwrs = 0;
-
codec->patch_ops = stac92xx_patch_ops;
if (find_mute_led_gpio(codec, 0))
(codec->revision_id & 0xf) == 1)
spec->stream_delay = 40; /* 40 milliseconds */
- /* no output amps */
- spec->num_pwrs = 0;
/* disable VSW */
spec->init = stac92hd71bxx_core_init;
unmute_init++;
if ((codec->revision_id & 0xf) == 1)
spec->stream_delay = 40; /* 40 milliseconds */
- /* no output amps */
- spec->num_pwrs = 0;
/* fallthru */
default:
spec->init = stac92hd71bxx_core_init;
git.openpandora.org / pandora-kernel.git / commitdiff