* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
clockevents: make device shutdown robust
clocksource, acpi_pm.c: fix check for monotonicity
clockevents: remove WARN_ON which was used to gather information
Thomas Graf <tgraf@suug.ch>
Tony Luck <tony.luck@intel.com>
Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
+Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
+Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
--- /dev/null
+What: /sys/class/gpio/
+Date: July 2008
+KernelVersion: 2.6.27
+Contact: David Brownell <dbrownell@users.sourceforge.net>
+Description:
+
+ As a Kconfig option, individual GPIO signals may be accessed from
+ userspace. GPIOs are only made available to userspace by an explicit
+ "export" operation. If a given GPIO is not claimed for use by
+ kernel code, it may be exported by userspace (and unexported later).
+ Kernel code may export it for complete or partial access.
+
+ GPIOs are identified as they are inside the kernel, using integers in
+ the range 0..INT_MAX. See Documentation/gpio.txt for more information.
+
+ /sys/class/gpio
+ /export ... asks the kernel to export a GPIO to userspace
+ /unexport ... to return a GPIO to the kernel
+ /gpioN ... for each exported GPIO #N
+ /value ... always readable, writes fail for input GPIOs
+ /direction ... r/w as: in, out (default low); write: high, low
+ /gpiochipN ... for each gpiochip; #N is its first GPIO
+ /base ... (r/o) same as N
+ /label ... (r/o) descriptive, not necessarily unique
+ /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1)
+
There is an exception to the above. If hotplug functionality is used
to remove all the CPUs that are currently assigned to a cpuset,
-then the kernel will automatically update the cpus_allowed of all
-tasks attached to CPUs in that cpuset to allow all CPUs. When memory
-hotplug functionality for removing Memory Nodes is available, a
-similar exception is expected to apply there as well. In general,
-the kernel prefers to violate cpuset placement, over starving a task
-that has had all its allowed CPUs or Memory Nodes taken offline. User
-code should reconfigure cpusets to only refer to online CPUs and Memory
-Nodes when using hotplug to add or remove such resources.
+then all the tasks in that cpuset will be moved to the nearest ancestor
+with non-empty cpus. But the moving of some (or all) tasks might fail if
+cpuset is bound with another cgroup subsystem which has some restrictions
+on task attaching. In this failing case, those tasks will stay
+in the original cpuset, and the kernel will automatically update
+their cpus_allowed to allow all online CPUs. When memory hotplug
+functionality for removing Memory Nodes is available, a similar exception
+is expected to apply there as well. In general, the kernel prefers to
+violate cpuset placement, over starving a task that has had all
+its allowed CPUs or Memory Nodes taken offline.
There is a second exception to the above. GFP_ATOMIC requests are
kernel internal allocations that must be satisfied, immediately.
controlled by a kernel/module/sysfs/sysctl parameter.
Who: Krzysztof Piotr Oledzki <ole@ans.pl>
+---------------------------
+
+What: ide-scsi (BLK_DEV_IDESCSI)
+When: 2.6.29
+Why: The 2.6 kernel supports direct writing to ide CD drives, which
+ eliminates the need for ide-scsi. The new method is more
+ efficient in every way.
+Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
- (bit 1) anonymous shared memory
- (bit 2) file-backed private memory
- (bit 3) file-backed shared memory
+ - (bit 4) ELF header pages in file-backed private memory areas (it is
+ effective only if the bit 2 is cleared)
Note that MMIO pages such as frame buffer are never dumped and vDSO pages
are always dumped regardless of the bitmask status.
USB VIDEO CLASS
P: Laurent Pinchart
M: laurent.pinchart@skynet.be
-L: linx-uvc-devel@berlios.de
+L: linux-uvc-devel@lists.berlios.de
L: video4linux-list@redhat.com
W: http://linux-uvc.berlios.de
S: Maintained
* The networking and block device layers use this boolean for bounce
* buffer decisions.
*/
-#define PCI_DMA_BUS_IS_PHYS (0)
+#define PCI_DMA_BUS_IS_PHYS (1)
/*
* Whether pci_unmap_{single,page} is a nop depends upon the
{
u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
- if (id < 0)
- return;
-
mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
if (enable)
mdctl |= 0x00000003; /* Enable Module */
};
static struct imxuart_platform_data uart_pdata = {
- .flags = 0,
+ .flags = IMXUART_HAVE_RTSCTS,
};
static struct platform_device *devices[] __initdata = {
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
+#include "clock.h"
#include "devices.h"
static unsigned long tosa_pin_config[] = {
.wakeup = 1,
.active_low = 1,
},
+ {
+ .type = EV_SW,
+ .code = SW_HEADPHONE_INSERT,
+ .gpio = TOSA_GPIO_EAR_IN,
+ .desc = "HeadPhone insert",
+ .active_low = 1,
+ .debounce_interval = 300,
+ },
};
static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
pxa_set_i2c_info(NULL);
platform_scoop_config = &tosa_pcmcia_config;
+ clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
}
/*
* arch/arm/mach-sa1100/include/mach/jornada720.h
*
- * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728
+ * SSP/MCU communication definitions for HP Jornada 710/720/728
*
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- * Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu>
+ * Copyright 2007,2008 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ * Copyright 2000 John Ankcorn <jca@lcs.mit.edu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#define PWMOFF 0xDF
#define TXDUMMY 0x11
#define ERRORCODE 0x00
+
+extern void jornada_ssp_start(void);
+extern void jornada_ssp_end(void);
+extern int jornada_ssp_inout(u8 byte);
+extern int jornada_ssp_byte(u8 byte);
#include <linux/slab.h>
#include <mach/hardware.h>
-#include <asm/hardware/ssp.h>
#include <mach/jornada720.h>
+#include <asm/hardware/ssp.h>
static DEFINE_SPINLOCK(jornada_ssp_lock);
static unsigned long jornada_ssp_flags;
* jornada_ssp_start - enable mcu
*
*/
-int jornada_ssp_start()
+void jornada_ssp_start(void)
{
spin_lock_irqsave(&jornada_ssp_lock, jornada_ssp_flags);
GPCR = GPIO_GPIO25;
udelay(50);
- return 0;
+ return;
};
EXPORT_SYMBOL(jornada_ssp_start);
* jornada_ssp_end - disable mcu and turn off lock
*
*/
-int jornada_ssp_end()
+void jornada_ssp_end(void)
{
GPSR = GPIO_GPIO25;
spin_unlock_irqrestore(&jornada_ssp_lock, jornada_ssp_flags);
- return 0;
+ return;
};
EXPORT_SYMBOL(jornada_ssp_end);
#include <mach/tc.h>
#include <mach/board.h>
+#include <mach/mmc.h>
#include <mach/mux.h>
#include <mach/gpio.h>
#include <mach/menelaus.h>
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+ defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-#ifdef CONFIG_ARCH_OMAP24XX
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define OMAP_MMC1_BASE 0x4809c000
-#define OMAP_MMC1_INT INT_24XX_MMC_IRQ
+#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x1fc)
+#define OMAP_MMC1_INT INT_24XX_MMC_IRQ
+
+#define OMAP_MMC2_BASE 0x480b4000
+#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x1fc)
+#define OMAP_MMC2_INT INT_24XX_MMC2_IRQ
+
#else
+
#define OMAP_MMC1_BASE 0xfffb7800
+#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x7f)
#define OMAP_MMC1_INT INT_MMC
-#endif
+
#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */
+#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x7f)
+#define OMAP_MMC2_INT INT_1610_MMC2
+
+#endif
-static struct omap_mmc_conf mmc1_conf;
+static struct omap_mmc_platform_data mmc1_data;
static u64 mmc1_dmamask = 0xffffffff;
static struct resource mmc1_resources[] = {
{
.start = OMAP_MMC1_BASE,
- .end = OMAP_MMC1_BASE + 0x7f,
+ .end = OMAP_MMC1_END,
.flags = IORESOURCE_MEM,
},
{
.id = 1,
.dev = {
.dma_mask = &mmc1_dmamask,
- .platform_data = &mmc1_conf,
+ .platform_data = &mmc1_data,
},
.num_resources = ARRAY_SIZE(mmc1_resources),
.resource = mmc1_resources,
};
-#ifdef CONFIG_ARCH_OMAP16XX
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+ defined(CONFIG_ARCH_OMAP34XX)
-static struct omap_mmc_conf mmc2_conf;
+static struct omap_mmc_platform_data mmc2_data;
static u64 mmc2_dmamask = 0xffffffff;
static struct resource mmc2_resources[] = {
{
.start = OMAP_MMC2_BASE,
- .end = OMAP_MMC2_BASE + 0x7f,
+ .end = OMAP_MMC2_END,
.flags = IORESOURCE_MEM,
},
{
- .start = INT_1610_MMC2,
+ .start = OMAP_MMC2_INT,
.flags = IORESOURCE_IRQ,
},
};
.id = 2,
.dev = {
.dma_mask = &mmc2_dmamask,
- .platform_data = &mmc2_conf,
+ .platform_data = &mmc2_data,
},
.num_resources = ARRAY_SIZE(mmc2_resources),
.resource = mmc2_resources,
};
#endif
-static void __init omap_init_mmc(void)
+static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf)
{
- const struct omap_mmc_config *mmc_conf;
- const struct omap_mmc_conf *mmc;
-
- /* NOTE: assumes MMC was never (wrongly) enabled */
- mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
- if (!mmc_conf)
+ if (cpu_is_omap2430() || cpu_is_omap34xx())
return;
- /* block 1 is always available and has just one pinout option */
- mmc = &mmc_conf->mmc[0];
- if (mmc->enabled) {
+ if (mmc_conf->mmc[0].enabled) {
if (cpu_is_omap24xx()) {
omap_cfg_reg(H18_24XX_MMC_CMD);
omap_cfg_reg(H15_24XX_MMC_CLKI);
omap_cfg_reg(P20_1710_MMC_DATDIR0);
}
}
- if (mmc->wire4) {
+ if (mmc_conf->mmc[0].wire4) {
if (cpu_is_omap24xx()) {
omap_cfg_reg(H14_24XX_MMC_DAT1);
omap_cfg_reg(E19_24XX_MMC_DAT2);
} else {
omap_cfg_reg(MMC_DAT1);
/* NOTE: DAT2 can be on W10 (here) or M15 */
- if (!mmc->nomux)
+ if (!mmc_conf->mmc[0].nomux)
omap_cfg_reg(MMC_DAT2);
omap_cfg_reg(MMC_DAT3);
}
}
- mmc1_conf = *mmc;
- (void) platform_device_register(&mmc_omap_device1);
}
#ifdef CONFIG_ARCH_OMAP16XX
/* block 2 is on newer chips, and has many pinout options */
- mmc = &mmc_conf->mmc[1];
- if (mmc->enabled) {
- if (!mmc->nomux) {
+ if (mmc_conf->mmc[1].enabled) {
+ if (!mmc_conf->mmc[1].nomux) {
omap_cfg_reg(Y8_1610_MMC2_CMD);
omap_cfg_reg(Y10_1610_MMC2_CLK);
omap_cfg_reg(R18_1610_MMC2_CLKIN);
omap_cfg_reg(W8_1610_MMC2_DAT0);
- if (mmc->wire4) {
+ if (mmc_conf->mmc[1].wire4) {
omap_cfg_reg(V8_1610_MMC2_DAT1);
omap_cfg_reg(W15_1610_MMC2_DAT2);
omap_cfg_reg(R10_1610_MMC2_DAT3);
if (cpu_is_omap1710())
omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
MOD_CONF_CTRL_1);
- mmc2_conf = *mmc;
+ }
+#endif
+}
+
+static void __init omap_init_mmc(void)
+{
+ const struct omap_mmc_config *mmc_conf;
+
+ /* NOTE: assumes MMC was never (wrongly) enabled */
+ mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
+ if (!mmc_conf)
+ return;
+
+ omap_init_mmc_conf(mmc_conf);
+
+ if (mmc_conf->mmc[0].enabled) {
+ mmc1_data.conf = mmc_conf->mmc[0];
+ (void) platform_device_register(&mmc_omap_device1);
+ }
+
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+ defined(CONFIG_ARCH_OMAP34XX)
+ if (mmc_conf->mmc[1].enabled) {
+ mmc2_data.conf = mmc_conf->mmc[1];
(void) platform_device_register(&mmc_omap_device2);
}
#endif
- return;
}
+
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info)
+{
+ switch (host) {
+ case 1:
+ mmc1_data = *info;
+ break;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+ defined(CONFIG_ARCH_OMAP34XX)
+ case 2:
+ mmc2_data = *info;
+ break;
+#endif
+ default:
+ BUG();
+ }
+}
+
#else
static inline void omap_init_mmc(void) {}
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {}
#endif
/*-------------------------------------------------------------------------*/
#ifdef CONFIG_BOARD_ATSTK100X_SPI1
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
-#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
at32_add_device_mci(0, MCI_PDATA);
#endif
#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
--- /dev/null
+uImage
+uImage.srec
+vmlinux.cso
+sfdwarf.log
--- /dev/null
+vmlinux.lds
EXPORT_SYMBOL(find_next_zero_bit);
EXPORT_SYMBOL(find_first_bit);
EXPORT_SYMBOL(find_next_bit);
+EXPORT_SYMBOL(generic_find_next_le_bit);
EXPORT_SYMBOL(generic_find_next_zero_le_bit);
/* I/O primitives (lib/io-*.S) */
rcall sys_epoll_pwait
sub sp, -4
popm pc
+
+ .global __sys_sync_file_range
+ .type __sys_sync_file_range,@function
+__sys_sync_file_range:
+ pushm lr
+ st.w --sp, ARG6
+ rcall sys_sync_file_range
+ sub sp, -4
+ popm pc
.long sys_set_robust_list
.long sys_get_robust_list /* 260 */
.long __sys_splice
- .long sys_sync_file_range
+ .long __sys_sync_file_range
.long sys_tee
.long sys_vmsplice
.long __sys_epoll_pwait /* 265 */
switch (ret) {
case NOTIFY_OK:
case NOTIFY_STOP:
- return;
+ break;
case NOTIFY_BAD:
die("Fatal Non-Maskable Interrupt", regs, SIGINT);
default:
+ printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
+ nmi_disable();
break;
}
-
- printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
- nmi_disable();
+ nmi_exit();
}
asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
brgt 1b
retal r11
+ENTRY(generic_find_next_le_bit)
+ lsr r8, r10, 5
+ sub r9, r11, r10
+ retle r11
+
+ lsl r8, 2
+ add r12, r8
+ andl r10, 31, COH
+ breq 1f
+
+ /* offset is not word-aligned. Handle the first (32 - r10) bits */
+ ldswp.w r8, r12[0]
+ sub r12, -4
+ lsr r8, r8, r10
+ brne .L_found
+
+ /* r9 = r9 - (32 - r10) = r9 + r10 - 32 */
+ add r9, r10
+ sub r9, 32
+ retle r11
+
+ /* Main loop. offset must be word-aligned */
+1: ldswp.w r8, r12[0]
+ cp.w r8, 0
+ brne .L_found
+ sub r12, -4
+ sub r9, 32
+ brgt 1b
+ retal r11
+
ENTRY(generic_find_next_zero_le_bit)
lsr r8, r10, 5
sub r9, r11, r10
} \
} while (0)
+/*
+ * format for entries in the Global Offset Table
+ */
+struct got_entry {
+ uint64_t val;
+};
+
+/*
+ * Layout of the Function Descriptor
+ */
+struct fdesc {
+ uint64_t ip;
+ uint64_t gp;
+};
+
#endif /* _ASM_IA64_ELF_H */
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
+#include <linux/elf.h>
+#include <linux/uaccess.h>
#include <asm-generic/sections.h>
extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
extern char __start_ivt_text[], __end_ivt_text[];
#undef dereference_function_descriptor
-void *dereference_function_descriptor(void *);
+static inline void *dereference_function_descriptor(void *ptr)
+{
+ struct fdesc *desc = ptr;
+ void *p;
+
+ if (!probe_kernel_address(&desc->ip, p))
+ ptr = p;
+ return ptr;
+}
+
#endif /* _ASM_IA64_SECTIONS_H */
* until the transfer is complete. In order to get the asynch
* version of bte_copy, you must perform this check yourself.
*/
-#define BTE_UNALIGNED_COPY(src, dest, len, mode) \
- (((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) || \
- (dest & L1_CACHE_MASK)) ? \
- bte_unaligned_copy(src, dest, len, mode) : \
+#define BTE_UNALIGNED_COPY(src, dest, len, mode) \
+ (((len & (L1_CACHE_BYTES - 1)) || \
+ (src & (L1_CACHE_BYTES - 1)) || \
+ (dest & (L1_CACHE_BYTES - 1))) ? \
+ bte_unaligned_copy(src, dest, len, mode) : \
bte_copy(src, dest, len, mode, NULL))
#include <linux/elf.h>
#include <linux/moduleloader.h>
#include <linux/string.h>
-#include <linux/uaccess.h>
#include <linux/vmalloc.h>
#include <asm/patch.h>
-#include <asm/sections.h>
#include <asm/unaligned.h>
#define ARCH_MODULE_DEBUG 0
#undef N
-struct got_entry {
- uint64_t val;
-};
-
-struct fdesc {
- uint64_t ip;
- uint64_t gp;
-};
-
/* Opaque struct for insns, to protect against derefs. */
struct insn;
if (mod->arch.core_unw_table)
unw_remove_unwind_table(mod->arch.core_unw_table);
}
-
-void *dereference_function_descriptor(void *ptr)
-{
- struct fdesc *desc = ptr;
- void *p;
-
- if (!probe_kernel_address(&desc->ip, p))
- ptr = p;
- return ptr;
-}
return -EBUSY;
}
- cpu_clear(cpu, cpu_online_map);
-
if (migrate_platform_irqs(cpu)) {
cpu_set(cpu, cpu_online_map);
return (-EBUSY);
}
remove_siblinginfo(cpu);
- cpu_clear(cpu, cpu_online_map);
fixup_irqs();
+ cpu_clear(cpu, cpu_online_map);
local_flush_tlb_all();
cpu_clear(cpu, cpu_callin_map);
return 0;
entry = find_next_zero_bit(map, mapsize, last_entry);
}
- if (entry > mapsize)
+ if (entry > mapsize) {
+ kfree(ca_dmamap);
goto map_return;
+ }
for (i = 0; i < entries; i++)
set_bit(entry + i, map);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:00 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDEDOUBLER=y
CONFIG_BLK_DEV_BUDDHA=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
CONFIG_GVP11_SCSI=y
CONFIG_SCSI_A4000T=y
CONFIG_SCSI_ZORRO7XX=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_PAULA=m
CONFIG_DMASOUND=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:01 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
-CONFIG_APOLLO_ELPLUS=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:02 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_FALCON_IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
CONFIG_ATARI_SCSI=y
# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
# CONFIG_ATARI_SCSI_RESET_BOOT is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_ATARI=m
CONFIG_DMASOUND=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# Character devices
#
CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
CONFIG_ATARI_MIDI=m
CONFIG_ATARI_DSP56K=m
-# CONFIG_SERIAL_CONSOLE is not set
#
# File systems
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
CONFIG_JBD=y
+CONFIG_JBD2=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
-CONFIG_SUNRPC_BIND34=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:03 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_BVME6000_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:04 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:06 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_MAC_IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
# CONFIG_SCSI_DEBUG is not set
CONFIG_MAC_SCSI=y
CONFIG_SCSI_MAC_ESP=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:07 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_MAC_IDE=y
CONFIG_BLK_DEV_Q40IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
CONFIG_MVME16x_SCSI=y
CONFIG_BVME6000_SCSI=y
CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_HYDRA=m
CONFIG_ZORRO8390=m
CONFIG_APNE=m
-CONFIG_APOLLO_ELPLUS=y
CONFIG_MAC8390=y
CONFIG_MAC89x0=m
CONFIG_MACSONIC=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_ATARI=m
CONFIG_DMASOUND_PAULA=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# Character devices
#
CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
CONFIG_ATARI_MIDI=m
CONFIG_ATARI_DSP56K=m
CONFIG_AMIGA_BUILTIN_SERIAL=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
CONFIG_JBD=y
+CONFIG_JBD2=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:08 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME147_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:09 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME16x_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:10 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_GENERIC_ISA_DMA=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_Q40IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_Q40=m
CONFIG_DMASOUND=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:11 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:12 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
cascade = irq_cascade + irq;
if (cascade->get_irq != NULL) {
unsigned int source_irq = irq;
+ int ret;
desc = irq_desc + source_irq;
if (desc->chip->mask_ack)
desc->chip->mask_ack(source_irq);
desc->chip->mask(source_irq);
desc->chip->ack(source_irq);
}
- irq = cascade->get_irq(irq);
- if (irq < 0)
+ ret = cascade->get_irq(irq);
+ irq = ret;
+ if (ret < 0)
atomic_inc(&irq_err_count);
else
irq_dispatch(irq);
* If we're in an interrupt or have no user
* context, we must not take the fault..
*/
- if (in_interrupt() || !mm)
+ if (in_atomic() || !mm)
goto no_context;
down_read(&mm->mmap_sem);
image-$(CONFIG_PPC_CHRP) += zImage.chrp
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
-image-$(CONFIG_PPC_HOLLY) += zImage.holly
+image-$(CONFIG_PPC_HOLLY) += dtbImage.holly
image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800
image-$(CONFIG_PPC_ISERIES) += zImage.iseries
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
cell-index = <0>;
reg = <0x0 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <60 2>;
+ interrupts = <76 2>;
};
dma-channel@1 {
compatible = "fsl,mpc8610-dma-channel",
cell-index = <1>;
reg = <0x80 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <61 2>;
+ interrupts = <77 2>;
};
dma-channel@2 {
compatible = "fsl,mpc8610-dma-channel",
cell-index = <2>;
reg = <0x100 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <62 2>;
+ interrupts = <78 2>;
};
dma-channel@3 {
compatible = "fsl,mpc8610-dma-channel",
cell-index = <3>;
reg = <0x180 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <63 2>;
+ interrupts = <79 2>;
};
};
/* Keep this the last entry. */
#define R_PPC64_NUM 107
+/* There's actually a third entry here, but it's unused */
+struct ppc64_opd_entry
+{
+ unsigned long funcaddr;
+ unsigned long r2;
+};
+
#ifdef __KERNEL__
#ifdef CONFIG_SPU_BASE
#define _ASM_POWERPC_SECTIONS_H
#ifdef __KERNEL__
+#include <linux/elf.h>
+#include <linux/uaccess.h>
#include <asm-generic/sections.h>
#ifdef __powerpc64__
}
#undef dereference_function_descriptor
-void *dereference_function_descriptor(void *);
+static inline void *dereference_function_descriptor(void *ptr)
+{
+ struct ppc64_opd_entry *desc = ptr;
+ void *p;
+
+ if (!probe_kernel_address(&desc->funcaddr, p))
+ ptr = p;
+ return ptr;
+}
#endif
#include <linux/err.h>
#include <linux/vmalloc.h>
#include <linux/bug.h>
-#include <linux/uaccess.h>
#include <asm/module.h>
-#include <asm/sections.h>
#include <asm/firmware.h>
#include <asm/code-patching.h>
#include <linux/sort.h>
#define DEBUGP(fmt , ...)
#endif
-/* There's actually a third entry here, but it's unused */
-struct ppc64_opd_entry
-{
- unsigned long funcaddr;
- unsigned long r2;
-};
-
/* Like PPC32, we need little trampolines to do > 24-bit jumps (into
the kernel itself). But on PPC64, these need to be used for every
jump, actually, to reset r2 (TOC+0x8000). */
return 0;
}
-
-void *dereference_function_descriptor(void *ptr)
-{
- struct ppc64_opd_entry *desc = ptr;
- void *p;
-
- if (!probe_kernel_address(&desc->funcaddr, p))
- ptr = p;
- return ptr;
-}
return of_bus_default_map(addr, range, na, ns, pna);
}
-static unsigned int of_bus_sbus_get_flags(const u32 *addr)
+static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags)
{
return IORESOURCE_MEM;
}
*/
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
- .n = 38 * sizeof(u32),
+ .n = 38,
.size = sizeof(u32), .align = sizeof(u32),
.get = genregs32_get, .set = genregs32_set
},
*/
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = 99 * sizeof(u32),
+ .n = 99,
.size = sizeof(u32), .align = sizeof(u32),
.get = fpregs32_get, .set = fpregs32_set
},
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/linkage.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/kernel_stat.h>
: "g1", "g2");
}
-void init_irqwork_curcpu(void)
+void notrace init_irqwork_curcpu(void)
{
int cpu = hard_smp_processor_id();
}
}
-void __cpuinit sun4v_register_mondo_queues(int this_cpu)
+void __cpuinit notrace sun4v_register_mondo_queues(int this_cpu)
{
struct trap_per_cpu *tb = &trap_block[this_cpu];
{
unsigned long csr_reg, csr, csr_error_bits;
irqreturn_t ret = IRQ_NONE;
- u16 stat;
+ u16 stat, *addr;
if (is_pbm_a) {
csr_reg = pbm->controller_regs + PSYCHO_PCIA_CTRL;
printk("%s: PCI SERR signal asserted.\n", pbm->name);
ret = IRQ_HANDLED;
}
- pci_read_config_word(pbm->pci_bus->self, PCI_STATUS, &stat);
+ addr = psycho_pci_config_mkaddr(pbm, pbm->pci_first_busno,
+ 0, PCI_STATUS);
+ pci_config_read16(addr, &stat);
if (stat & (PCI_STATUS_PARITY |
PCI_STATUS_SIG_TARGET_ABORT |
PCI_STATUS_REC_TARGET_ABORT |
PCI_STATUS_SIG_SYSTEM_ERROR)) {
printk("%s: PCI bus error, PCI_STATUS[%04x]\n",
pbm->name, stat);
- pci_write_config_word(pbm->pci_bus->self, PCI_STATUS, 0xffff);
+ pci_config_write16(addr, 0xffff);
ret = IRQ_HANDLED;
}
return ret;
* the second will just error out since we do not pass in
* IRQF_SHARED.
*/
- err = request_irq(op->irqs[1], psycho_ue_intr, 0,
+ err = request_irq(op->irqs[1], psycho_ue_intr, IRQF_SHARED,
"PSYCHO_UE", pbm);
- err = request_irq(op->irqs[2], psycho_ce_intr, 0,
+ err = request_irq(op->irqs[2], psycho_ce_intr, IRQF_SHARED,
"PSYCHO_CE", pbm);
/* This one, however, ought not to fail. We can just warn
* about it since the system can still operate properly even
* if this fails.
*/
- err = request_irq(op->irqs[0], psycho_pcierr_intr, 0,
+ err = request_irq(op->irqs[0], psycho_pcierr_intr, IRQF_SHARED,
"PSYCHO_PCIERR", pbm);
if (err)
printk(KERN_WARNING "%s: Could not register PCIERR, "
return PSYCHO_IMAP_B_SLOT0 + (slot * 8);
}
-#define PSYCHO_IMAP_SCSI 0x1000UL
-#define PSYCHO_IMAP_ETH 0x1008UL
-#define PSYCHO_IMAP_BPP 0x1010UL
-#define PSYCHO_IMAP_AU_REC 0x1018UL
-#define PSYCHO_IMAP_AU_PLAY 0x1020UL
-#define PSYCHO_IMAP_PFAIL 0x1028UL
-#define PSYCHO_IMAP_KMS 0x1030UL
-#define PSYCHO_IMAP_FLPY 0x1038UL
-#define PSYCHO_IMAP_SHW 0x1040UL
-#define PSYCHO_IMAP_KBD 0x1048UL
-#define PSYCHO_IMAP_MS 0x1050UL
-#define PSYCHO_IMAP_SER 0x1058UL
-#define PSYCHO_IMAP_TIM0 0x1060UL
-#define PSYCHO_IMAP_TIM1 0x1068UL
-#define PSYCHO_IMAP_UE 0x1070UL
-#define PSYCHO_IMAP_CE 0x1078UL
-#define PSYCHO_IMAP_A_ERR 0x1080UL
-#define PSYCHO_IMAP_B_ERR 0x1088UL
-#define PSYCHO_IMAP_PMGMT 0x1090UL
-#define PSYCHO_IMAP_GFX 0x1098UL
-#define PSYCHO_IMAP_EUPA 0x10a0UL
-
-static unsigned long __psycho_onboard_imap_off[] = {
-/*0x20*/ PSYCHO_IMAP_SCSI,
-/*0x21*/ PSYCHO_IMAP_ETH,
-/*0x22*/ PSYCHO_IMAP_BPP,
-/*0x23*/ PSYCHO_IMAP_AU_REC,
-/*0x24*/ PSYCHO_IMAP_AU_PLAY,
-/*0x25*/ PSYCHO_IMAP_PFAIL,
-/*0x26*/ PSYCHO_IMAP_KMS,
-/*0x27*/ PSYCHO_IMAP_FLPY,
-/*0x28*/ PSYCHO_IMAP_SHW,
-/*0x29*/ PSYCHO_IMAP_KBD,
-/*0x2a*/ PSYCHO_IMAP_MS,
-/*0x2b*/ PSYCHO_IMAP_SER,
-/*0x2c*/ PSYCHO_IMAP_TIM0,
-/*0x2d*/ PSYCHO_IMAP_TIM1,
-/*0x2e*/ PSYCHO_IMAP_UE,
-/*0x2f*/ PSYCHO_IMAP_CE,
-/*0x30*/ PSYCHO_IMAP_A_ERR,
-/*0x31*/ PSYCHO_IMAP_B_ERR,
-/*0x32*/ PSYCHO_IMAP_PMGMT,
-/*0x33*/ PSYCHO_IMAP_GFX,
-/*0x34*/ PSYCHO_IMAP_EUPA,
-};
+#define PSYCHO_OBIO_IMAP_BASE 0x1000UL
+
#define PSYCHO_ONBOARD_IRQ_BASE 0x20
-#define PSYCHO_ONBOARD_IRQ_LAST 0x34
#define psycho_onboard_imap_offset(__ino) \
- __psycho_onboard_imap_off[(__ino) - PSYCHO_ONBOARD_IRQ_BASE]
+ (PSYCHO_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
#define PSYCHO_ICLR_A_SLOT0 0x1400UL
#define PSYCHO_ICLR_SCSI 0x1800UL
imap_off = psycho_pcislot_imap_offset(ino);
} else {
/* Onboard device */
- if (ino > PSYCHO_ONBOARD_IRQ_LAST) {
- prom_printf("psycho_irq_build: Wacky INO [%x]\n", ino);
- prom_halt();
- }
imap_off = psycho_onboard_imap_offset(ino);
}
#define SABRE_IMAP_A_SLOT0 0x0c00UL
#define SABRE_IMAP_B_SLOT0 0x0c20UL
-#define SABRE_IMAP_SCSI 0x1000UL
-#define SABRE_IMAP_ETH 0x1008UL
-#define SABRE_IMAP_BPP 0x1010UL
-#define SABRE_IMAP_AU_REC 0x1018UL
-#define SABRE_IMAP_AU_PLAY 0x1020UL
-#define SABRE_IMAP_PFAIL 0x1028UL
-#define SABRE_IMAP_KMS 0x1030UL
-#define SABRE_IMAP_FLPY 0x1038UL
-#define SABRE_IMAP_SHW 0x1040UL
-#define SABRE_IMAP_KBD 0x1048UL
-#define SABRE_IMAP_MS 0x1050UL
-#define SABRE_IMAP_SER 0x1058UL
-#define SABRE_IMAP_UE 0x1070UL
-#define SABRE_IMAP_CE 0x1078UL
-#define SABRE_IMAP_PCIERR 0x1080UL
-#define SABRE_IMAP_GFX 0x1098UL
-#define SABRE_IMAP_EUPA 0x10a0UL
#define SABRE_ICLR_A_SLOT0 0x1400UL
#define SABRE_ICLR_B_SLOT0 0x1480UL
#define SABRE_ICLR_SCSI 0x1800UL
return SABRE_IMAP_B_SLOT0 + (slot * 8);
}
-static unsigned long __sabre_onboard_imap_off[] = {
-/*0x20*/ SABRE_IMAP_SCSI,
-/*0x21*/ SABRE_IMAP_ETH,
-/*0x22*/ SABRE_IMAP_BPP,
-/*0x23*/ SABRE_IMAP_AU_REC,
-/*0x24*/ SABRE_IMAP_AU_PLAY,
-/*0x25*/ SABRE_IMAP_PFAIL,
-/*0x26*/ SABRE_IMAP_KMS,
-/*0x27*/ SABRE_IMAP_FLPY,
-/*0x28*/ SABRE_IMAP_SHW,
-/*0x29*/ SABRE_IMAP_KBD,
-/*0x2a*/ SABRE_IMAP_MS,
-/*0x2b*/ SABRE_IMAP_SER,
-/*0x2c*/ 0 /* reserved */,
-/*0x2d*/ 0 /* reserved */,
-/*0x2e*/ SABRE_IMAP_UE,
-/*0x2f*/ SABRE_IMAP_CE,
-/*0x30*/ SABRE_IMAP_PCIERR,
-/*0x31*/ 0 /* reserved */,
-/*0x32*/ 0 /* reserved */,
-/*0x33*/ SABRE_IMAP_GFX,
-/*0x34*/ SABRE_IMAP_EUPA,
-};
-#define SABRE_ONBOARD_IRQ_BASE 0x20
-#define SABRE_ONBOARD_IRQ_LAST 0x30
+#define SABRE_OBIO_IMAP_BASE 0x1000UL
+#define SABRE_ONBOARD_IRQ_BASE 0x20
#define sabre_onboard_imap_offset(__ino) \
- __sabre_onboard_imap_off[(__ino) - SABRE_ONBOARD_IRQ_BASE]
+ (SABRE_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
#define sabre_iclr_offset(ino) \
((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \
imap_off = sabre_pcislot_imap_offset(ino);
} else {
/* onboard device */
- if (ino > SABRE_ONBOARD_IRQ_LAST) {
- prom_printf("sabre_irq_build: Wacky INO [%x]\n", ino);
- prom_halt();
- }
imap_off = sabre_onboard_imap_offset(ino);
}
*/
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
- .n = 36 * sizeof(u64),
+ .n = 36,
.size = sizeof(u64), .align = sizeof(u64),
.get = genregs64_get, .set = genregs64_set
},
*/
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = 35 * sizeof(u64),
+ .n = 35,
.size = sizeof(u64), .align = sizeof(u64),
.get = fpregs64_get, .set = fpregs64_set
},
*/
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
- .n = 38 * sizeof(u32),
+ .n = 38,
.size = sizeof(u32), .align = sizeof(u32),
.get = genregs32_get, .set = genregs32_set
},
*/
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = 99 * sizeof(u32),
+ .n = 99,
.size = sizeof(u32), .align = sizeof(u32),
.get = fpregs32_get, .set = fpregs32_set
},
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/linkage.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/smp.h>
/* This can get invoked before sched_init() so play it super safe
* and use hard_smp_processor_id().
*/
-void init_cur_cpu_trap(struct thread_info *t)
+void notrace init_cur_cpu_trap(struct thread_info *t)
{
int cpu = hard_smp_processor_id();
struct trap_per_cpu *p = &trap_block[cpu];
/*
* The NOPL instruction is supposed to exist on all CPUs with
- * family >= 6, unfortunately, that's not true in practice because
+ * family >= 6; unfortunately, that's not true in practice because
* of early VIA chips and (more importantly) broken virtualizers that
- * are not easy to detect. Hence, probe for it based on first
- * principles.
+ * are not easy to detect. In the latter case it doesn't even *fail*
+ * reliably, so probing for it doesn't even work. Disable it completely
+ * unless we can find a reliable way to detect all the broken cases.
*/
static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
{
- const u32 nopl_signature = 0x888c53b1; /* Random number */
- u32 has_nopl = nopl_signature;
-
clear_cpu_cap(c, X86_FEATURE_NOPL);
- if (c->x86 >= 6) {
- asm volatile("\n"
- "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
- "2:\n"
- " .section .fixup,\"ax\"\n"
- "3: xor %0,%0\n"
- " jmp 2b\n"
- " .previous\n"
- _ASM_EXTABLE(1b,3b)
- : "+a" (has_nopl));
-
- if (has_nopl == nopl_signature)
- set_cpu_cap(c, X86_FEATURE_NOPL);
- }
}
static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
if (PageHighMem(pg)) {
data = ioremap_cache(pa_data, sizeof(*data));
if (!data) {
+ kfree(node);
error = -ENXIO;
goto err_dir;
}
parse_early_param();
+#ifdef CONFIG_X86_64
+ check_efer();
+#endif
+
#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
/*
* Must be before kernel pagetables are setup
#else
num_physpages = max_pfn;
- check_efer();
/* How many end-of-memory variables you have, grandma! */
/* need this before calling reserve_initrd */
u64 *spte;
int young = 0;
+ /* always return old for EPT */
+ if (!shadow_accessed_mask)
+ return 0;
+
spte = rmap_next(kvm, rmapp, NULL);
while (spte) {
int _young;
module_param(npt, int, S_IRUGO);
static void kvm_reput_irq(struct vcpu_svm *svm);
+static void svm_flush_tlb(struct kvm_vcpu *vcpu);
static inline struct vcpu_svm *to_svm(struct kvm_vcpu *vcpu)
{
static void svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
{
unsigned long host_cr4_mce = read_cr4() & X86_CR4_MCE;
+ unsigned long old_cr4 = to_svm(vcpu)->vmcb->save.cr4;
+
+ if (npt_enabled && ((old_cr4 ^ cr4) & X86_CR4_PGE))
+ force_new_asid(vcpu);
vcpu->arch.cr4 = cr4;
if (!npt_enabled)
KVMTRACE_3D(TDP_FAULT, &svm->vcpu, error_code,
(u32)fault_address, (u32)(fault_address >> 32),
handler);
+ /*
+ * FIXME: Tis shouldn't be necessary here, but there is a flush
+ * missing in the MMU code. Until we find this bug, flush the
+ * complete TLB here on an NPF
+ */
+ if (npt_enabled)
+ svm_flush_tlb(&svm->vcpu);
if (event_injection)
kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
VMX_EPT_WRITABLE_MASK |
VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
- kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
- VMX_EPT_FAKE_DIRTY_MASK, 0ull,
+ kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull,
VMX_EPT_EXECUTABLE_MASK);
kvm_enable_tdp();
} else
#define VMX_EPT_READABLE_MASK 0x1ull
#define VMX_EPT_WRITABLE_MASK 0x2ull
#define VMX_EPT_EXECUTABLE_MASK 0x4ull
-#define VMX_EPT_FAKE_ACCESSED_MASK (1ull << 62)
-#define VMX_EPT_FAKE_DIRTY_MASK (1ull << 63)
#define VMX_EPT_IDENTITY_PAGETABLE_ADDR 0xfffbc000ul
{
pgd_t *pgd_base = swapper_pg_dir;
- paravirt_pagetable_setup_start(pgd_base);
-
permanent_kmaps_init(pgd_base);
-
- paravirt_pagetable_setup_done(pgd_base);
}
#ifdef CONFIG_ACPI_SLEEP
e820.nr_map = 0;
- e820_add_region(0, PFN_PHYS(max_pfn), E820_RAM);
+ e820_add_region(0, PFN_PHYS((u64)max_pfn), E820_RAM);
/*
* Even though this is normal, usable memory under Xen, reserve
}
EXPORT_SYMBOL(blk_verify_command);
+#if 0
/* and now, the sysfs stuff */
static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page,
int rw)
kobject_put(disk->holder_dir->parent);
}
EXPORT_SYMBOL(blk_unregister_filter);
+#endif
* off.
*/
if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) {
- int rc = piix_disable_ahci(pdev);
+ rc = piix_disable_ahci(pdev);
if (rc)
return rc;
}
PORT_SCR = 0x20,
/* HOST_CTL bits */
+ HCTL_LEDEN = (1 << 3), /* enable LED operation */
HCTL_IRQOFF = (1 << 8), /* global IRQ off */
HCTL_FTHD0 = (1 << 10), /* fifo threshold 0 */
HCTL_FTHD1 = (1 << 11), /* fifo threshold 1*/
void __iomem *port_base = inic_port_base(ap);
/* fire up the ADMA engine */
- writew(HCTL_FTHD0, port_base + HOST_CTL);
+ writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL);
writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL);
writeb(0, port_base + PORT_CPB_PTQFIFO);
edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_MODE0_ENCRYPT;
memcpy(req->giv, ctx->iv, crypto_aead_ivsize(authenc));
+ /* avoid consecutive packets going out with same IV */
+ *(__be64 *)req->giv ^= cpu_to_be64(req->seq);
return ipsec_esp(edesc, areq, req->giv, req->seq,
ipsec_esp_encrypt_done);
priv->ofdev = ofdev;
+ INIT_LIST_HEAD(&priv->alg_list);
+
tasklet_init(&priv->done_task, talitos_done, (unsigned long)dev);
tasklet_init(&priv->error_task, talitos_error, (unsigned long)dev);
}
/* register crypto algorithms the device supports */
- INIT_LIST_HEAD(&priv->alg_list);
-
for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
if (hw_supports(dev, driver_algs[i].desc_hdr_template)) {
struct talitos_crypto_alg *t_alg;
ide_proc_unregister_driver(drive, info->driver);
- blk_unregister_filter(info->disk);
del_gendisk(info->disk);
ide_cd_put(info);
g->fops = &idecd_ops;
g->flags |= GENHD_FL_REMOVABLE;
add_disk(g);
- blk_register_filter(g);
return 0;
out_free_cd:
return 0;
}
+static struct hpt_info *hpt3xx_get_info(struct device *dev)
+{
+ struct ide_host *host = dev_get_drvdata(dev);
+ struct hpt_info *info = (struct hpt_info *)host->host_priv;
+
+ return dev == host->dev[1] ? info + 1 : info;
+}
+
/*
* The Marvell bridge chips used on the HighPoint SATA cards do not seem
* to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes...
static u8 hpt3xx_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
u8 mask = hwif->ultra_mask;
switch (info->chip_type) {
static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
switch (info->chip_type) {
case HPT372 :
{
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
struct hpt_timings *t = info->timings;
u8 itr_addr = 0x40 + (drive->dn * 4);
u32 old_itr = 0;
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
if (drive->quirk_list) {
if (info->chip_type >= HPT370) {
static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
{
unsigned long io_base = pci_resource_start(dev, 4);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(&dev->dev);
const char *name = DRV_NAME;
u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */
u8 chip_type;
static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
u8 chip_type = info->chip_type;
u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
int serialize = HPT_SERIALIZE_IO;
u8 chip_type = info->chip_type;
u8 new_mcr, old_mcr = 0;
* time 'round when curr_resync == 2
*/
continue;
- prepare_to_wait(&resync_wait, &wq, TASK_UNINTERRUPTIBLE);
+ /* We need to wait 'interruptible' so as not to
+ * contribute to the load average, and not to
+ * be caught by 'softlockup'
+ */
+ prepare_to_wait(&resync_wait, &wq, TASK_INTERRUPTIBLE);
if (!kthread_should_stop() &&
mddev2->curr_resync >= mddev->curr_resync) {
printk(KERN_INFO "md: delaying %s of %s"
" share one or more physical units)\n",
desc, mdname(mddev), mdname(mddev2));
mddev_put(mddev2);
+ if (signal_pending(current))
+ flush_signals(current);
schedule();
finish_wait(&resync_wait, &wq);
goto try_again;
config VIDEO_SH_MOBILE_CEU
tristate "SuperH Mobile CEU Interface driver"
- depends on VIDEO_DEV
+ depends on VIDEO_DEV && HAS_DMA
select SOC_CAMERA
select VIDEOBUF_DMA_CONTIG
---help---
}
static struct class memstick_host_class = {
- .name = "memstick_host",
+ .name = "memstick_host",
.dev_release = memstick_free
};
* @sg - TPC argument
*/
void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
- struct scatterlist *sg)
+ const struct scatterlist *sg)
{
mrq->tpc = tpc;
if (tpc & 8)
* user supplied buffer.
*/
void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
- void *buf, size_t length)
+ const void *buf, size_t length)
{
mrq->tpc = tpc;
if (tpc & 8)
if (!host->card) {
if (memstick_power_on(host))
goto out_power_off;
- } else
+ } else if (host->card->stop)
host->card->stop(host->card);
card = memstick_alloc_card(host);
|| !(host->card->check(host->card))) {
device_unregister(&host->card->dev);
host->card = NULL;
- } else
+ } else if (host->card->start)
host->card->start(host->card);
}
#define MSPRO_BLOCK_SIGNATURE 0xa5c3
#define MSPRO_BLOCK_MAX_ATTRIBUTES 41
+#define MSPRO_BLOCK_PART_SHIFT 3
+
enum {
MSPRO_BLOCK_ID_SYSINFO = 0x10,
MSPRO_BLOCK_ID_MODELNAME = 0x15,
static int mspro_block_disk_release(struct gendisk *disk)
{
struct mspro_block_data *msb = disk->private_data;
- int disk_id = disk->first_minor >> MEMSTICK_PART_SHIFT;
+ int disk_id = disk->first_minor >> MSPRO_BLOCK_PART_SHIFT;
mutex_lock(&mspro_block_disk_lock);
struct mspro_block_data *msb = memstick_get_drvdata(card);
int rc = 0;
+try_again:
if (msb->caps & MEMSTICK_CAP_PAR4)
rc = mspro_block_set_interface(card, MEMSTICK_SYS_PAR4);
else
rc = memstick_set_rw_addr(card);
if (!rc)
rc = mspro_block_set_interface(card, msb->system);
+
+ if (!rc) {
+ msleep(150);
+ rc = mspro_block_wait_for_ced(card);
+ if (rc)
+ return rc;
+
+ if (msb->caps & MEMSTICK_CAP_PAR8) {
+ msb->caps &= ~MEMSTICK_CAP_PAR8;
+ goto try_again;
+ }
+ }
}
return rc;
}
return -EIO;
msb->caps = host->caps;
- rc = mspro_block_switch_interface(card);
+
+ msleep(150);
+ rc = mspro_block_wait_for_ced(card);
if (rc)
return rc;
- msleep(200);
- rc = mspro_block_wait_for_ced(card);
+ rc = mspro_block_switch_interface(card);
if (rc)
return rc;
+
dev_dbg(&card->dev, "card activated\n");
if (msb->system != MEMSTICK_SYS_SERIAL)
msb->caps |= MEMSTICK_CAP_AUTO_GET_INT;
if (rc)
return rc;
- if ((disk_id << MEMSTICK_PART_SHIFT) > 255) {
+ if ((disk_id << MSPRO_BLOCK_PART_SHIFT) > 255) {
rc = -ENOSPC;
goto out_release_id;
}
- msb->disk = alloc_disk(1 << MEMSTICK_PART_SHIFT);
+ msb->disk = alloc_disk(1 << MSPRO_BLOCK_PART_SHIFT);
if (!msb->disk) {
rc = -ENOMEM;
goto out_release_id;
MSPRO_BLOCK_MAX_PAGES * msb->page_size);
msb->disk->major = major;
- msb->disk->first_minor = disk_id << MEMSTICK_PART_SHIFT;
+ msb->disk->first_minor = disk_id << MSPRO_BLOCK_PART_SHIFT;
msb->disk->fops = &ms_block_bdops;
msb->usage_count = 1;
msb->disk->private_data = msb;
static struct memstick_device_id mspro_block_id_tbl[] = {
{MEMSTICK_MATCH_ALL, MEMSTICK_TYPE_PRO, MEMSTICK_CATEGORY_STORAGE_DUO,
- MEMSTICK_CLASS_GENERIC_DUO},
+ MEMSTICK_CLASS_DUO},
{}
};
#define TPC_CODE_SZ_MASK 0x00000700
#define TPC_DATA_SZ_MASK 0x00000007
+#define HOST_CONTROL_TDELAY_EN 0x00040000
+#define HOST_CONTROL_HW_OC_P 0x00010000
#define HOST_CONTROL_RESET_REQ 0x00008000
#define HOST_CONTROL_REI 0x00004000
#define HOST_CONTROL_LED 0x00000400
#define HOST_CONTROL_RESET 0x00000100
#define HOST_CONTROL_POWER_EN 0x00000080
#define HOST_CONTROL_CLOCK_EN 0x00000040
+#define HOST_CONTROL_REO 0x00000008
#define HOST_CONTROL_IF_SHIFT 4
#define HOST_CONTROL_IF_SERIAL 0x0
#define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000
#define CLOCK_CONTROL_40MHZ 0x00000001
-#define CLOCK_CONTROL_50MHZ 0x00000002
+#define CLOCK_CONTROL_50MHZ 0x0000000a
#define CLOCK_CONTROL_60MHZ 0x00000008
#define CLOCK_CONTROL_62_5MHZ 0x0000000c
#define CLOCK_CONTROL_OFF 0x00000000
+#define PCI_CTL_CLOCK_DLY_ADDR 0x000000b0
+#define PCI_CTL_CLOCK_DLY_MASK_A 0x00000f00
+#define PCI_CTL_CLOCK_DLY_MASK_B 0x0000f000
+
enum {
CMD_READY = 0x01,
FIFO_READY = 0x02,
return host->req->error;
}
- dev_dbg(&msh->dev, "control %08x\n",
- readl(host->addr + HOST_CONTROL));
+ dev_dbg(&msh->dev, "control %08x\n", readl(host->addr + HOST_CONTROL));
dev_dbg(&msh->dev, "status %08x\n", readl(host->addr + INT_STATUS));
dev_dbg(&msh->dev, "hstatus %08x\n", readl(host->addr + STATUS));
ndelay(20);
}
dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n");
- return -EIO;
+ /* return -EIO; */
reset_next:
writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN
host_ctl = 7;
host_ctl |= HOST_CONTROL_POWER_EN
- | HOST_CONTROL_CLOCK_EN;
+ | HOST_CONTROL_CLOCK_EN
+ | HOST_CONTROL_HW_OC_P
+ | HOST_CONTROL_TDELAY_EN;
writel(host_ctl, host->addr + HOST_CONTROL);
writel(host->id ? PAD_PU_PD_ON_MS_SOCK1
break;
case MEMSTICK_INTERFACE:
host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT);
+ pci_read_config_dword(host->chip->pdev,
+ PCI_CTL_CLOCK_DLY_ADDR,
+ &clock_delay);
+ clock_delay &= host->id ? ~PCI_CTL_CLOCK_DLY_MASK_B
+ : ~PCI_CTL_CLOCK_DLY_MASK_A;
if (value == MEMSTICK_SERIAL) {
host_ctl &= ~HOST_CONTROL_FAST_CLK;
+ host_ctl &= ~HOST_CONTROL_REO;
host_ctl |= HOST_CONTROL_IF_SERIAL
<< HOST_CONTROL_IF_SHIFT;
host_ctl |= HOST_CONTROL_REI;
clock_ctl = CLOCK_CONTROL_40MHZ;
- clock_delay = 0;
} else if (value == MEMSTICK_PAR4) {
- host_ctl |= HOST_CONTROL_FAST_CLK;
+ host_ctl |= HOST_CONTROL_FAST_CLK | HOST_CONTROL_REO;
host_ctl |= HOST_CONTROL_IF_PAR4
<< HOST_CONTROL_IF_SHIFT;
host_ctl &= ~HOST_CONTROL_REI;
clock_ctl = CLOCK_CONTROL_40MHZ;
- clock_delay = 4;
+ clock_delay |= host->id ? (4 << 12) : (4 << 8);
} else if (value == MEMSTICK_PAR8) {
host_ctl |= HOST_CONTROL_FAST_CLK;
host_ctl |= HOST_CONTROL_IF_PAR8
<< HOST_CONTROL_IF_SHIFT;
- host_ctl &= ~HOST_CONTROL_REI;
- clock_ctl = CLOCK_CONTROL_60MHZ;
- clock_delay = 0;
+ host_ctl &= ~(HOST_CONTROL_REI | HOST_CONTROL_REO);
+ clock_ctl = CLOCK_CONTROL_50MHZ;
} else
return -EINVAL;
+
writel(host_ctl, host->addr + HOST_CONTROL);
writel(clock_ctl, host->addr + CLOCK_CONTROL);
- writel(clock_delay, host->addr + CLOCK_DELAY);
+ pci_write_config_dword(host->chip->pdev,
+ PCI_CTL_CLOCK_DLY_ADDR,
+ clock_delay);
break;
};
return 0;
int order = get_order(sizeof(struct gru_state) *
GRU_CHIPLETS_PER_BLADE);
+ if (!IS_UV())
+ return;
+
for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++)
free_irq(IRQ_GRU + i, NULL);
struct bnx2_irq {
irq_handler_t handler;
- u16 vector;
+ unsigned int vector;
u8 requested;
char name[16];
};
nic->flags |= wol_magic;
/* ack any pending wake events, disable PME */
- err = pci_enable_wake(pdev, 0, 0);
- if (err)
- DPRINTK(PROBE, ERR, "Error clearing wake event\n");
+ pci_pme_active(pdev, false);
strcpy(netdev->name, "eth%d");
if((err = register_netdev(netdev))) {
static u8 e1000_calculate_mng_checksum(char *buffer, u32 length);
static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex);
static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
/* IGP cable length table */
static const
83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124,
104, 109, 114, 118, 121, 124};
+static DEFINE_SPINLOCK(e1000_eeprom_lock);
+
/******************************************************************************
* Set the phy type member in the hw struct.
*
* words - number of words to read
*****************************************************************************/
s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_read_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
+}
+
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
u32 i = 0;
* EEPROM will most likely contain an invalid checksum.
*****************************************************************************/
s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_write_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
+}
+
+
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
s32 status = 0;
dev->dev_addr[4] = (np->orig_mac[0] >> 8) & 0xff;
dev->dev_addr[5] = (np->orig_mac[0] >> 0) & 0xff;
writel(txreg|NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll);
+ printk(KERN_DEBUG "nv_probe: set workaround bit for reversed mac addr\n");
}
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
}
}
-static void __devexit nv_remove(struct pci_dev *pci_dev)
+static void nv_restore_mac_addr(struct pci_dev *pci_dev)
{
struct net_device *dev = pci_get_drvdata(pci_dev);
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
- unregister_netdev(dev);
-
/* special op: write back the misordered MAC address - otherwise
* the next nv_probe would see a wrong address.
*/
writel(np->orig_mac[1], base + NvRegMacAddrB);
writel(readl(base + NvRegTransmitPoll) & ~NVREG_TRANSMITPOLL_MAC_ADDR_REV,
base + NvRegTransmitPoll);
+}
+
+static void __devexit nv_remove(struct pci_dev *pci_dev)
+{
+ struct net_device *dev = pci_get_drvdata(pci_dev);
+
+ unregister_netdev(dev);
+
+ nv_restore_mac_addr(pci_dev);
/* restore any phy related changes */
nv_restore_phy(dev);
if (netif_running(dev))
nv_close(dev);
+ nv_restore_mac_addr(pdev);
+
pci_disable_device(pdev);
if (system_state == SYSTEM_POWER_OFF) {
if (pci_enable_wake(pdev, PCI_D3cold, np->wolenabled))
#ifndef MODULE
struct net_device * __init hp_plus_probe(int unit)
{
- struct net_device *dev = alloc_ei_netdev();
+ struct net_device *dev = alloc_eip_netdev();
int err;
if (!dev)
int option_reg;
int retval;
- if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))) {
+ if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) {
return retval;
}
/* Select the operational page. */
outw(Perf_Page, ioaddr + HP_PAGING);
- ei_open(dev);
+ eip_open(dev);
return 0;
}
int option_reg = inw(ioaddr + HPP_OPTION);
free_irq(dev->irq, dev);
- ei_close(dev);
+ eip_close(dev);
outw((option_reg & ~EnableIRQ) | MemDisable | NICReset | ChipReset,
ioaddr + HPP_OPTION);
niu_enable_interrupts(np, 1);
}
+static void niu_reset_buffers(struct niu *np)
+{
+ int i, j, k, err;
+
+ if (np->rx_rings) {
+ for (i = 0; i < np->num_rx_rings; i++) {
+ struct rx_ring_info *rp = &np->rx_rings[i];
+
+ for (j = 0, k = 0; j < MAX_RBR_RING_SIZE; j++) {
+ struct page *page;
+
+ page = rp->rxhash[j];
+ while (page) {
+ struct page *next =
+ (struct page *) page->mapping;
+ u64 base = page->index;
+ base = base >> RBR_DESCR_ADDR_SHIFT;
+ rp->rbr[k++] = cpu_to_le32(base);
+ page = next;
+ }
+ }
+ for (; k < MAX_RBR_RING_SIZE; k++) {
+ err = niu_rbr_add_page(np, rp, GFP_ATOMIC, k);
+ if (unlikely(err))
+ break;
+ }
+
+ rp->rbr_index = rp->rbr_table_size - 1;
+ rp->rcr_index = 0;
+ rp->rbr_pending = 0;
+ rp->rbr_refill_pending = 0;
+ }
+ }
+ if (np->tx_rings) {
+ for (i = 0; i < np->num_tx_rings; i++) {
+ struct tx_ring_info *rp = &np->tx_rings[i];
+
+ for (j = 0; j < MAX_TX_RING_SIZE; j++) {
+ if (rp->tx_buffs[j].skb)
+ (void) release_tx_packet(np, rp, j);
+ }
+
+ rp->pending = MAX_TX_RING_SIZE;
+ rp->prod = 0;
+ rp->cons = 0;
+ rp->wrap_bit = 0;
+ }
+ }
+}
+
static void niu_reset_task(struct work_struct *work)
{
struct niu *np = container_of(work, struct niu, reset_task);
niu_stop_hw(np);
+ spin_unlock_irqrestore(&np->lock, flags);
+
+ niu_reset_buffers(np);
+
+ spin_lock_irqsave(&np->lock, flags);
+
err = niu_init_hw(np);
if (!err) {
np->timer.expires = jiffies + HZ;
unsigned int curlen;
struct ath_txq *cabq;
struct ath_txq *mcastq;
+ struct ieee80211_tx_info *info;
avp = sc->sc_vaps[if_id];
mcastq = &avp->av_mcastq;
*/
curlen = skb->len;
+ info = IEEE80211_SKB_CB(skb);
+ if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+ /*
+ * TODO: make sure the seq# gets assigned properly (vs. other
+ * TX frames)
+ */
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ sc->seq_no += 0x10;
+ hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+ hdr->seq_ctrl |= cpu_to_le16(sc->seq_no);
+ }
+
/* XXX: spin_lock_bh should not be used here, but sparse bitches
* otherwise. We should fix sparse :) */
spin_lock_bh(&mcastq->axq_lock);
u32 sc_txintrperiod; /* tx interrupt batching */
int sc_haltype2q[ATH9K_WME_AC_VO+1]; /* HAL WME AC -> h/w qnum */
u32 sc_ant_tx[8]; /* recent tx frames/antenna */
+ u16 seq_no; /* TX sequence number */
/* Beacon */
struct ath9k_tx_queue_info sc_beacon_qi;
{
struct ath_softc *sc = hw->priv;
int hdrlen, padsize;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+ /*
+ * As a temporary workaround, assign seq# here; this will likely need
+ * to be cleaned up to work better with Beacon transmission and virtual
+ * BSSes.
+ */
+ if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+ sc->seq_no += 0x10;
+ hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+ hdr->seq_ctrl |= cpu_to_le16(sc->seq_no);
+ }
/* Add the padding after the header if this is not already done */
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
return 0;
}
-/* Update the rfkill state */
-static void b43_rfkill_update_state(struct b43_wldev *dev)
-{
- struct b43_rfkill *rfk = &(dev->wl->rfkill);
-
- if (!dev->radio_hw_enable) {
- rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED;
- return;
- }
-
- if (!dev->phy.radio_on)
- rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED;
- else
- rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-
-}
-
/* The poll callback for the hardware button. */
static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
{
if (unlikely(enabled != dev->radio_hw_enable)) {
dev->radio_hw_enable = enabled;
report_change = 1;
- b43_rfkill_update_state(dev);
b43info(wl, "Radio hardware status changed to %s\n",
enabled ? "ENABLED" : "DISABLED");
}
return 0;
}
-/* Update the rfkill state */
-static void b43legacy_rfkill_update_state(struct b43legacy_wldev *dev)
-{
- struct b43legacy_rfkill *rfk = &(dev->wl->rfkill);
-
- if (!dev->radio_hw_enable) {
- rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED;
- return;
- }
-
- if (!dev->phy.radio_on)
- rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED;
- else
- rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-
-}
-
/* The poll callback for the hardware button. */
static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev)
{
if (unlikely(enabled != dev->radio_hw_enable)) {
dev->radio_hw_enable = enabled;
report_change = 1;
- b43legacy_rfkill_update_state(dev);
b43legacyinfo(wl, "Radio hardware status changed to %s\n",
enabled ? "ENABLED" : "DISABLED");
}
return -ENODEV;
}
+ /* remove the device from the pci core */
+ pci_remove_bus_device(dev);
+
/* queue work item to blow away this sysfs entry and other
* parts.
*/
INIT_WORK(&dslot->remove_work, remove_slot_worker);
queue_work(dummyphp_wq, &dslot->remove_work);
- /* blow away this sysfs entry and other parts. */
- remove_slot(dslot);
-
pci_dev_put(dev);
}
return 0;
return 1;
}
}
- while (timeout > 1000) {
+ while (timeout > 0) {
msleep(10);
timeout -= 10;
if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) {
}
+static int blacklist_iommu(const struct dmi_system_id *id)
+{
+ printk(KERN_INFO "%s detected; disabling IOMMU\n",
+ id->ident);
+ dmar_disabled = 1;
+ return 0;
+}
+
+static struct dmi_system_id __initdata intel_iommu_dmi_table[] = {
+ { /* Some DG33BU BIOS revisions advertised non-existent VT-d */
+ .callback = blacklist_iommu,
+ .ident = "Intel DG33BU",
+ { DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
+ DMI_MATCH(DMI_BOARD_NAME, "DG33BU"),
+ }
+ },
+ { }
+};
+
+
void __init detect_intel_iommu(void)
{
if (swiotlb || no_iommu || iommu_detected || dmar_disabled)
return;
if (early_dmar_detect()) {
+ dmi_check_system(intel_iommu_dmi_table);
+ if (dmar_disabled)
+ return;
iommu_detected = 1;
}
}
} else {
res->start = l64;
res->end = l64 + sz64;
+ printk(KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
+ pci_name(dev), pos, (unsigned long long)res->start,
+ (unsigned long long)res->end);
}
} else {
sz = pci_size(l, sz, mask);
res->start = l;
res->end = l + sz;
+ printk(KERN_DEBUG "PCI: %s reg %x %s: [%llx, %llx]\n", pci_name(dev),
+ pos, (res->flags & IORESOURCE_IO) ? "io port":"32bit mmio",
+ (unsigned long long)res->start, (unsigned long long)res->end);
}
out:
res->start = base;
if (!res->end)
res->end = limit + 0xfff;
- printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
+ printk(KERN_DEBUG "PCI: bridge %s io port: [%llx, %llx]\n",
+ pci_name(dev), (unsigned long long) res->start,
+ (unsigned long long) res->end);
}
res = child->resource[1];
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
res->start = base;
res->end = limit + 0xfffff;
- printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
+ printk(KERN_DEBUG "PCI: bridge %s 32bit mmio: [%llx, %llx]\n",
+ pci_name(dev), (unsigned long long) res->start,
+ (unsigned long long) res->end);
}
res = child->resource[2];
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
res->start = base;
res->end = limit + 0xfffff;
- printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64)?"64":"32",res->start, res->end);
+ printk(KERN_DEBUG "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n",
+ pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64) ? "64" : "32",
+ (unsigned long long) res->start, (unsigned long long) res->end);
}
}
if (!res)
continue;
- printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n", bus->number, i, (res->flags & IORESOURCE_IO)? "io port":"mmio", res->start, res->end);
+ printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n",
+ bus->number, i,
+ (res->flags & IORESOURCE_IO) ? "io port" : "mmio",
+ (unsigned long long) res->start,
+ (unsigned long long) res->end);
}
}
add_timer(&skt->poll_timer);
- device_create_file(&skt->socket.dev, &dev_attr_status);
+ ret = device_create_file(&skt->socket.dev, &dev_attr_status);
+ if (ret)
+ goto out_err_8;
}
dev_set_drvdata(dev, sinfo);
do {
skt = &sinfo->skt[i];
+ device_remove_file(&skt->socket.dev, &dev_attr_status);
+ out_err_8:
del_timer_sync(&skt->poll_timer);
pcmcia_unregister_socket(&skt->socket);
*/
static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
{
- struct zfcp_adapter *adapter;
+ struct zfcp_adapter *adapter = dev_get_drvdata(&ccw_device->dev);
- down(&zfcp_data.config_sema);
- adapter = dev_get_drvdata(&ccw_device->dev);
switch (event) {
case CIO_GONE:
dev_warn(&adapter->ccw_device->dev, "device gone\n");
89, NULL);
break;
}
- zfcp_erp_wait(adapter);
- up(&zfcp_data.config_sema);
return 1;
}
struct scatterlist sg_resp[ZFCP_GPN_FT_BUFFERS];
};
-static struct zfcp_port *zfcp_get_port_by_did(struct zfcp_adapter *adapter,
- u32 d_id)
-{
- struct zfcp_port *port;
-
- list_for_each_entry(port, &adapter->port_list_head, list)
- if ((port->d_id == d_id) &&
- !atomic_test_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status))
- return port;
- return NULL;
-}
-
static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
struct fcp_rscn_element *elem)
{
zfcp_port_get(port);
retval = zfcp_fc_adisc(port);
- if (retval == 0 || retval == -EBUSY)
+ if (retval == 0)
return;
/* send of ADISC was not possible */
zfcp_port_put(port);
- zfcp_erp_port_forced_reopen(port, 0, 65, NULL);
+ if (retval != -EBUSY)
+ zfcp_erp_port_forced_reopen(port, 0, 65, NULL);
}
static int zfcp_scan_get_nameserver(struct zfcp_adapter *adapter)
if (ret)
return ret;
zfcp_erp_wait(adapter);
- zfcp_port_put(adapter->nameserver_port);
}
return !atomic_test_mask(ZFCP_STATUS_COMMON_UNBLOCKED,
&adapter->nameserver_port->status);
struct zfcp_adapter *adapter = ct->port->adapter;
struct zfcp_port *port, *tmp;
u32 d_id;
- int ret = 0, x;
+ int ret = 0, x, last = 0;
if (ct->status)
return -EIO;
down(&zfcp_data.config_sema);
/* first entry is the header */
- for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES; x++) {
+ for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES && !last; x++) {
if (x % (ZFCP_GPN_FT_ENTRIES + 1))
acc++;
else
acc = sg_virt(++sg);
+ last = acc->control & 0x80;
d_id = acc->port_id[0] << 16 | acc->port_id[1] << 8 |
acc->port_id[2];
/* skip the adapter's port and known remote ports */
- if (acc->wwpn == fc_host_port_name(adapter->scsi_host) ||
- zfcp_get_port_by_did(adapter, d_id))
+ if (acc->wwpn == fc_host_port_name(adapter->scsi_host))
+ continue;
+ port = zfcp_get_port_by_wwpn(adapter, acc->wwpn);
+ if (port) {
+ zfcp_port_get(port);
continue;
+ }
port = zfcp_port_enqueue(adapter, acc->wwpn,
ZFCP_STATUS_PORT_DID_DID |
ret = PTR_ERR(port);
else
zfcp_erp_port_reopen(port, 0, 149, NULL);
- if (acc->control & 0x80) /* last entry */
- break;
}
zfcp_erp_wait(adapter);
static int zfcp_fsf_sbal_check(struct zfcp_qdio_queue *queue)
{
- spin_lock(&queue->lock);
+ spin_lock_bh(&queue->lock);
if (atomic_read(&queue->count))
return 1;
- spin_unlock(&queue->lock);
+ spin_unlock_bh(&queue->lock);
return 0;
}
long ret;
struct zfcp_qdio_queue *req_q = &adapter->req_q;
- spin_unlock(&req_q->lock);
+ spin_unlock_bh(&req_q->lock);
ret = wait_event_interruptible_timeout(adapter->request_wq,
zfcp_fsf_sbal_check(req_q), 5 * HZ);
if (ret > 0)
return 0;
- spin_lock(&req_q->lock);
+ spin_lock_bh(&req_q->lock);
return -EIO;
}
volatile struct qdio_buffer_element *sbale;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_UNSOLICITED_STATUS,
ZFCP_REQ_NO_QTCB,
adapter->pool.fsf_req_status_read);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
zfcp_fsf_req_free(req);
zfcp_hba_dbf_event_fsf_unsol("fail", adapter, NULL);
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND,
req_flags, adapter->pool.fsf_req_abort);
- if (unlikely(IS_ERR(req)))
+ if (IS_ERR(req))
goto out;
if (unlikely(!(atomic_read(&unit->status) &
struct zfcp_fsf_req *req;
int ret = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_GENERIC,
ZFCP_REQ_AUTO_CLEANUP, pool);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
ret = PTR_ERR(req);
goto out;
}
if (erp_action)
erp_action->fsf_req = NULL;
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return ret;
}
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_ELS,
ZFCP_REQ_AUTO_CLEANUP, NULL);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
ret = PTR_ERR(req);
goto out;
}
struct zfcp_adapter *adapter = erp_action->adapter;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (!atomic_read(&adapter->req_q.count))
goto out;
req = zfcp_fsf_req_create(adapter,
FSF_QTCB_EXCHANGE_CONFIG_DATA,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req = NULL;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA,
0, NULL);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
if (!retval)
wait_event(req->completion_wq,
req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT))
return -EOPNOTSUPP;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (!atomic_read(&adapter->req_q.count))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT))
return -EOPNOTSUPP;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (!atomic_read(&adapter->req_q.count))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0,
NULL);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
if (!retval)
wait_event(req->completion_wq,
req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
FSF_QTCB_OPEN_PORT_WITH_DID,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PORT,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PHYSICAL_PORT,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_OPEN_LUN,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_LUN,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
adapter->pool.fsf_req_scsi);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
adapter->pool.fsf_req_scsi);
- if (unlikely(IS_ERR(req)))
+ if (IS_ERR(req))
goto out;
req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT;
return ERR_PTR(-EINVAL);
}
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, fsf_cfdc->command, 0, NULL);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = -EPERM;
goto out;
}
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
if (!retval) {
wait_event(req->completion_wq,
/* clear QDIOUP flag, thus do_QDIO is not called during qdio_shutdown */
req_q = &adapter->req_q;
- spin_lock(&req_q->lock);
+ spin_lock_bh(&req_q->lock);
atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status);
- spin_unlock(&req_q->lock);
+ spin_unlock_bh(&req_q->lock);
qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR);
config BLK_DEV_SD
tristate "SCSI disk support"
depends on SCSI
- select CRC_T10DIF
+ select CRC_T10DIF if BLK_DEV_INTEGRITY
---help---
If you want to use SCSI hard disks, Fibre Channel disks,
Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
/*
* LUN Not Accessible - ALUA state transition
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b)
/*
* LUN Not Accessible -- Target port in standby state
/*
* Power On, Reset, or Bus Device Reset, just retry.
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) {
/*
* ALUA state changed
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
}
if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) {
/*
* Implicit ALUA state transition failed
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
}
break;
}
if (!err)
return SCSI_DH_IO;
err = alua_check_sense(sdev, &sense_hdr);
- if (retry > 0 && err == NEEDS_RETRY) {
+ if (retry > 0 && err == ADD_TO_MLQUEUE) {
retry--;
goto retry;
}
return SCSI_DH_IO;
err = alua_check_sense(sdev, &sense_hdr);
- if (err == NEEDS_RETRY)
+ if (err == ADD_TO_MLQUEUE)
goto retry;
sdev_printk(KERN_INFO, sdev,
"%s: rtpg sense code %02x/%02x/%02x\n",
* Unit Attention Code. This is the first IO
* to the new path, so just retry.
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
break;
}
return SCSI_DH_IO;
err = clariion_check_sense(sdev, &sshdr);
- if (retry > 0 && err == NEEDS_RETRY) {
+ if (retry > 0 && err == ADD_TO_MLQUEUE) {
retry--;
goto retry;
}
*
* Just retry and wait.
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
break;
case ILLEGAL_REQUEST:
if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) {
/*
* Power On, Reset, or Bus Device Reset, just retry.
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
break;
}
/* success just means we do not care what scsi-ml does */
case HARDWARE_ERROR:
if (scmd->device->retry_hwerror)
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
else
return SUCCESS;
* PDT=1Fh none (no FDD connected to the requested logical unit)
*/
if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) &&
- (result[0] & 0x1f) == 0x1f) {
+ (result[0] & 0x1f) == 0x1f &&
+ !scsi_is_wlun(lun)) {
SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
"scsi scan: peripheral device type"
" of 31, no device added\n"));
dev_set_drvdata(dev, sdkp);
add_disk(gd);
- blk_register_filter(gd);
sd_dif_config_host(sdkp);
sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
struct scsi_disk *sdkp = dev_get_drvdata(dev);
device_del(&sdkp->dev);
- blk_unregister_filter(sdkp->disk);
del_gendisk(sdkp->disk);
sd_shutdown(dev);
dev_set_drvdata(dev, cd);
disk->flags |= GENHD_FL_REMOVABLE;
add_disk(disk);
- blk_register_filter(disk);
sdev_printk(KERN_DEBUG, sdev,
"Attached scsi CD-ROM %s\n", cd->cdi.name);
{
struct scsi_cd *cd = dev_get_drvdata(dev);
- blk_unregister_filter(cd->disk);
del_gendisk(cd->disk);
mutex_lock(&sr_ref_mutex);
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
-#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
-#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
+#ifdef CONFIG_ARCH_IMX
+#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
+#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
+#endif
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+#define UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */
+#endif
#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
#define UCR3_BPEN (1<<0) /* Preset registers enable */
#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
imx_txint(irq, dev_id);
- if (sts & USR1_RTSS)
+ if (sts & USR1_RTSD)
imx_rtsint(irq, dev_id);
return IRQ_HANDLED;
temp |= (UCR2_RXEN | UCR2_TXEN);
writel(temp, sport->port.membase + UCR2);
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+ temp = readl(sport->port.membase + UCR3);
+ temp |= UCR3_RXDMUXSEL;
+ writel(temp, sport->port.membase + UCR3);
+#endif
+
/*
* Enable modem status interrupts
*/
if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
sport->have_rtscts = 1;
- if (pdata->init)
- pdata->init(pdev);
+ if (pdata->init) {
+ ret = pdata->init(pdev);
+ if (ret)
+ goto clkput;
+ }
uart_add_one_port(&imx_reg, &sport->port);
platform_set_drvdata(pdev, &sport->port);
return 0;
+clkput:
+ clk_put(sport->clk);
+ clk_disable(sport->clk);
unmap:
iounmap(sport->port.membase);
free:
#define MAX_BUSES 3
-#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
-#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
-#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
+#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
+#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
+#define IS_DMA_ALIGNED(x) (((x) & 0x07) == 0)
+#define MAX_DMA_LEN 8191
/*
* for testing SSCR1 changes that require SSP restart, basically
size_t tx_map_len;
u8 n_bytes;
u32 dma_width;
- int cs_change;
int (*write)(struct driver_data *drv_data);
int (*read)(struct driver_data *drv_data);
irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
struct spi_transfer,
transfer_list);
+ /* Delay if requested before any change in chip select */
+ if (last_transfer->delay_usecs)
+ udelay(last_transfer->delay_usecs);
+
+ /* Drop chip select UNLESS cs_change is true or we are returning
+ * a message with an error, or next message is for another chip
+ */
if (!last_transfer->cs_change)
drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ else {
+ struct spi_message *next_msg;
+
+ /* Holding of cs was hinted, but we need to make sure
+ * the next message is for the same chip. Don't waste
+ * time with the following tests unless this was hinted.
+ *
+ * We cannot postpone this until pump_messages, because
+ * after calling msg->complete (below) the driver that
+ * sent the current message could be unloaded, which
+ * could invalidate the cs_control() callback...
+ */
+
+ /* get a pointer to the next message, if any */
+ spin_lock_irqsave(&drv_data->lock, flags);
+ if (list_empty(&drv_data->queue))
+ next_msg = NULL;
+ else
+ next_msg = list_entry(drv_data->queue.next,
+ struct spi_message, queue);
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ /* see if the next and current messages point
+ * to the same chip
+ */
+ if (next_msg && next_msg->spi != msg->spi)
+ next_msg = NULL;
+ if (!next_msg || msg->state == ERROR_STATE)
+ drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ }
msg->state = NULL;
if (msg->complete)
msg->actual_length += drv_data->len -
(drv_data->rx_end - drv_data->rx);
- /* Release chip select if requested, transfer delays are
- * handled in pump_transfers */
- if (drv_data->cs_change)
- drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ /* Transfer delays and chip select release are
+ * handled in pump_transfers or giveback
+ */
/* Move to next transfer */
msg->state = next_transfer(drv_data);
drv_data->cur_msg->actual_length += drv_data->len -
(drv_data->rx_end - drv_data->rx);
- /* Release chip select if requested, transfer delays are
- * handled in pump_transfers */
- if (drv_data->cs_change)
- drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ /* Transfer delays and chip select release are
+ * handled in pump_transfers or giveback
+ */
/* Move to next transfer */
drv_data->cur_msg->state = next_transfer(drv_data);
return;
}
- /* Delay if requested at end of transfer*/
+ /* Delay if requested at end of transfer before CS change */
if (message->state == RUNNING_STATE) {
previous = list_entry(transfer->transfer_list.prev,
struct spi_transfer,
transfer_list);
if (previous->delay_usecs)
udelay(previous->delay_usecs);
+
+ /* Drop chip select only if cs_change is requested */
+ if (previous->cs_change)
+ drv_data->cs_control(PXA2XX_CS_DEASSERT);
}
- /* Check transfer length */
- if (transfer->len > 8191)
- {
- dev_warn(&drv_data->pdev->dev, "pump_transfers: transfer "
- "length greater than 8191\n");
- message->status = -EINVAL;
- giveback(drv_data);
- return;
+ /* Check for transfers that need multiple DMA segments */
+ if (transfer->len > MAX_DMA_LEN && chip->enable_dma) {
+
+ /* reject already-mapped transfers; PIO won't always work */
+ if (message->is_dma_mapped
+ || transfer->rx_dma || transfer->tx_dma) {
+ dev_err(&drv_data->pdev->dev,
+ "pump_transfers: mapped transfer length "
+ "of %lu is greater than %d\n",
+ transfer->len, MAX_DMA_LEN);
+ message->status = -EINVAL;
+ giveback(drv_data);
+ return;
+ }
+
+ /* warn ... we force this to PIO mode */
+ if (printk_ratelimit())
+ dev_warn(&message->spi->dev, "pump_transfers: "
+ "DMA disabled for transfer length %ld "
+ "greater than %d\n",
+ (long)drv_data->len, MAX_DMA_LEN);
}
/* Setup the transfer state based on the type of transfer */
drv_data->len = transfer->len & DCMD_LENGTH;
drv_data->write = drv_data->tx ? chip->write : null_writer;
drv_data->read = drv_data->rx ? chip->read : null_reader;
- drv_data->cs_change = transfer->cs_change;
/* Change speed and bit per word on a per transfer */
cr0 = chip->cr0;
&dma_thresh))
if (printk_ratelimit())
dev_warn(&message->spi->dev,
- "pump_transfer: "
+ "pump_transfers: "
"DMA burst size reduced to "
"match bits_per_word\n");
}
message->state = RUNNING_STATE;
- /* Try to map dma buffer and do a dma transfer if successful */
- if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) {
+ /* Try to map dma buffer and do a dma transfer if successful, but
+ * only if the length is non-zero and less than MAX_DMA_LEN.
+ *
+ * Zero-length non-descriptor DMA is illegal on PXA2xx; force use
+ * of PIO instead. Care is needed above because the transfer may
+ * have have been passed with buffers that are already dma mapped.
+ * A zero-length transfer in PIO mode will not try to write/read
+ * to/from the buffers
+ *
+ * REVISIT large transfers are exactly where we most want to be
+ * using DMA. If this happens much, split those transfers into
+ * multiple DMA segments rather than forcing PIO.
+ */
+ drv_data->dma_mapped = 0;
+ if (drv_data->len > 0 && drv_data->len <= MAX_DMA_LEN)
+ drv_data->dma_mapped = map_dma_buffers(drv_data);
+ if (drv_data->dma_mapped) {
/* Ensure we have the correct interrupt handler */
drv_data->transfer_handler = dma_transfer;
cs->hw_mode |= SPMODE_LEN(bits_per_word);
if ((mpc83xx_spi->spibrg / hz) > 64) {
+ cs->hw_mode |= SPMODE_DIV16;
pm = mpc83xx_spi->spibrg / (hz * 64);
if (pm > 16) {
- cs->hw_mode |= SPMODE_DIV16;
- pm /= 16;
- if (pm > 16) {
- dev_err(&spi->dev, "Requested speed is too "
- "low: %d Hz. Will use %d Hz instead.\n",
- hz, mpc83xx_spi->spibrg / 1024);
- pm = 16;
- }
+ dev_err(&spi->dev, "Requested speed is too "
+ "low: %d Hz. Will use %d Hz instead.\n",
+ hz, mpc83xx_spi->spibrg / 1024);
+ pm = 16;
}
} else
pm = mpc83xx_spi->spibrg / (hz * 4);
if (t->bits_per_word)
bits_per_word = t->bits_per_word;
len = t->len;
- if (bits_per_word > 8)
+ if (bits_per_word > 8) {
+ /* invalid length? */
+ if (len & 1)
+ return -EINVAL;
len /= 2;
- if (bits_per_word > 16)
+ }
+ if (bits_per_word > 16) {
+ /* invalid length? */
+ if (len & 1)
+ return -EINVAL;
len /= 2;
+ }
mpc83xx_spi->count = len;
+
INIT_COMPLETION(mpc83xx_spi->done);
/* enable rx ints */
#endif
MODULE_ALIAS("platform:s3c2410-spi");
-static struct platform_driver s3c24xx_spidrv = {
+static struct platform_driver s3c24xx_spi_driver = {
.remove = __exit_p(s3c24xx_spi_remove),
.suspend = s3c24xx_spi_suspend,
.resume = s3c24xx_spi_resume,
static int __init s3c24xx_spi_init(void)
{
- return platform_driver_probe(&s3c24xx_spidrv, s3c24xx_spi_probe);
+ return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe);
}
static void __exit s3c24xx_spi_exit(void)
{
- platform_driver_unregister(&s3c24xx_spidrv);
+ platform_driver_unregister(&s3c24xx_spi_driver);
}
module_init(s3c24xx_spi_init);
return value;
}
+static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
+{
+ /* Turn off the LCD controller and the DMA controller */
+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+ sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
+
+ /* Wait for the LCDC core to become idle */
+ while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
+ msleep(10);
+
+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+}
+
+static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo)
+{
+ atmel_lcdfb_stop_nowait(sinfo);
+
+ /* Wait for DMA engine to become idle... */
+ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+ msleep(10);
+}
+
+static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
+{
+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+ (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
+ | ATMEL_LCDC_PWR);
+}
+
static void atmel_lcdfb_update_dma(struct fb_info *info,
struct fb_var_screeninfo *var)
{
{
might_sleep();
- /* LCD power off */
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-
- /* wait for the LCDC core to become idle */
- while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
- msleep(10);
-
- /* DMA disable */
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
-
- /* wait for DMA engine to become idle */
- while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
- msleep(10);
-
- /* LCD power on */
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
- (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
-
- /* DMA enable */
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+ atmel_lcdfb_stop(sinfo);
+ atmel_lcdfb_start(sinfo);
}
/**
info->var.xres, info->var.yres,
info->var.xres_virtual, info->var.yres_virtual);
- /* Turn off the LCD controller and the DMA controller */
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-
- /* Wait for the LCDC core to become idle */
- while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
- msleep(10);
-
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+ atmel_lcdfb_stop_nowait(sinfo);
if (info->var.bits_per_pixel == 1)
info->fix.visual = FB_VISUAL_MONO01;
while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
msleep(10);
- dev_dbg(info->device, " * re-enable DMA engine\n");
- /* ...and enable it with updated configuration */
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
-
- dev_dbg(info->device, " * re-enable LCDC core\n");
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
- (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
+ atmel_lcdfb_start(sinfo);
dev_dbg(info->device, " * DONE\n");
struct fb_info *info = platform_get_drvdata(pdev);
struct atmel_lcdfb_info *sinfo = info->par;
+ /*
+ * We don't want to handle interrupts while the clock is
+ * stopped. It may take forever.
+ */
+ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+
sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(0);
+
+ atmel_lcdfb_stop(sinfo);
atmel_lcdfb_stop_clock(sinfo);
+
return 0;
}
struct atmel_lcdfb_info *sinfo = info->par;
atmel_lcdfb_start_clock(sinfo);
+ atmel_lcdfb_start(sinfo);
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(1);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
+
+ /* Enable FIFO & DMA errors */
+ lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI
+ | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
+
return 0;
}
inode->i_ino);
if (err) {
inode_dec_link_count(inode);
- iput(inode);
mutex_unlock(&info->bfs_lock);
+ iput(inode);
return err;
}
mutex_unlock(&info->bfs_lock);
goto bail;
}
- if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno) {
+ if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno && create) {
ocfs2_error(inode->i_sb,
"Inode %llu has a hole at block %llu\n",
(unsigned long long)OCFS2_I(inode)->ip_blkno,
if (!size)
continue;
if (from + size > get_capacity(disk)) {
- printk(KERN_ERR " %s: p%d exceeds device capacity\n",
+ printk(KERN_WARNING
+ "%s: p%d exceeds device capacity\n",
disk->disk_name, p);
- continue;
}
res = add_partition(disk, p, from, size, state->parts[p].flags);
if (res) {
for (tmp = dir->subdir; tmp; tmp = tmp->next)
if (strcmp(tmp->name, dp->name) == 0) {
- printk(KERN_WARNING "proc_dir_entry '%s' already "
- "registered\n", dp->name);
+ printk(KERN_WARNING "proc_dir_entry '%s/%s' already registered\n",
+ dir->name, dp->name);
dump_stack();
break;
}
"SReclaimable: %8lu kB\n"
"SUnreclaim: %8lu kB\n"
"PageTables: %8lu kB\n"
+#ifdef CONFIG_QUICKLIST
+ "Quicklists: %8lu kB\n"
+#endif
"NFS_Unstable: %8lu kB\n"
"Bounce: %8lu kB\n"
"WritebackTmp: %8lu kB\n"
"Committed_AS: %8lu kB\n"
"VmallocTotal: %8lu kB\n"
"VmallocUsed: %8lu kB\n"
- "VmallocChunk: %8lu kB\n"
- "Quicklists: %8lu kB\n",
+ "VmallocChunk: %8lu kB\n",
K(i.totalram),
K(i.freeram),
K(i.bufferram),
K(global_page_state(NR_SLAB_RECLAIMABLE)),
K(global_page_state(NR_SLAB_UNRECLAIMABLE)),
K(global_page_state(NR_PAGETABLE)),
+#ifdef CONFIG_QUICKLIST
+ K(quicklist_total_size()),
+#endif
K(global_page_state(NR_UNSTABLE_NFS)),
K(global_page_state(NR_BOUNCE)),
K(global_page_state(NR_WRITEBACK_TEMP)),
K(committed),
(unsigned long)VMALLOC_TOTAL >> 10,
vmi.used >> 10,
- vmi.largest_chunk >> 10,
- K(quicklist_total_size())
+ vmi.largest_chunk >> 10
);
len += hugetlb_report_meminfo(page + len);
.release = udf_release_file,
.fsync = udf_fsync_file,
.splice_read = generic_file_splice_read,
+ .llseek = generic_file_llseek,
};
const struct inode_operations udf_file_inode_operations = {
*err = -ENOSPC;
iinfo = UDF_I(inode);
- iinfo->i_unique = 0;
- iinfo->i_lenExtents = 0;
- iinfo->i_next_alloc_block = 0;
- iinfo->i_next_alloc_goal = 0;
- iinfo->i_strat4096 = 0;
+ if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) {
+ iinfo->i_efe = 1;
+ if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev)
+ sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE;
+ iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+ sizeof(struct extendedFileEntry),
+ GFP_KERNEL);
+ } else {
+ iinfo->i_efe = 0;
+ iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+ sizeof(struct fileEntry),
+ GFP_KERNEL);
+ }
+ if (!iinfo->i_ext.i_data) {
+ iput(inode);
+ *err = -ENOMEM;
+ return NULL;
+ }
block = udf_new_block(dir->i_sb, NULL,
dinfo->i_location.partitionReferenceNum,
lvhd->uniqueID = cpu_to_le64(uniqueID);
mark_buffer_dirty(sbi->s_lvid_bh);
}
+ mutex_unlock(&sbi->s_alloc_mutex);
inode->i_mode = mode;
inode->i_uid = current->fsuid;
if (dir->i_mode & S_ISGID) {
iinfo->i_lenEAttr = 0;
iinfo->i_lenAlloc = 0;
iinfo->i_use = 0;
- if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) {
- iinfo->i_efe = 1;
- if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev)
- sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE;
- iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
- sizeof(struct extendedFileEntry),
- GFP_KERNEL);
- } else {
- iinfo->i_efe = 0;
- iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
- sizeof(struct fileEntry),
- GFP_KERNEL);
- }
- if (!iinfo->i_ext.i_data) {
- iput(inode);
- *err = -ENOMEM;
- mutex_unlock(&sbi->s_alloc_mutex);
- return NULL;
- }
if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_AD_IN_ICB))
iinfo->i_alloc_type = ICBTAG_FLAG_AD_IN_ICB;
else if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_SHORT_AD))
iinfo->i_crtime = current_fs_time(inode->i_sb);
insert_inode_hash(inode);
mark_inode_dirty(inode);
- mutex_unlock(&sbi->s_alloc_mutex);
if (DQUOT_ALLOC_INODE(inode)) {
DQUOT_DROP(inode);
unlikely(__ret_warn_once); \
})
+#define WARN_ONCE(condition, format...) ({ \
+ static int __warned; \
+ int __ret_warn_once = !!(condition); \
+ \
+ if (unlikely(__ret_warn_once)) \
+ if (WARN(!__warned, format)) \
+ __warned = 1; \
+ unlikely(__ret_warn_once); \
+})
+
#define WARN_ON_RATELIMIT(condition, state) \
WARN_ON((condition) && __ratelimit(state))
static inline int lba_28_ok(u64 block, u32 n_block)
{
/* check the ending block number */
- return ((block + n_block - 1) < ((u64)1 << 28)) && (n_block <= 256);
+ return ((block + n_block) < ((u64)1 << 28)) && (n_block <= 256);
}
static inline int lba_48_ok(u64 block, u32 n_block)
*/
extern int blk_verify_command(struct blk_cmd_filter *filter,
unsigned char *cmd, int has_write_perm);
-extern int blk_register_filter(struct gendisk *disk);
-extern void blk_unregister_filter(struct gendisk *disk);
extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter);
#define MAX_PHYS_SEGMENTS 128
struct resource *parent, resource_size_t start,
resource_size_t n, const char *name);
-#define devm_release_region(start,n) \
+#define devm_release_region(dev, start, n) \
__devm_release_region(dev, &ioport_resource, (start), (n))
-#define devm_release_mem_region(start,n) \
+#define devm_release_mem_region(dev, start, n) \
__devm_release_region(dev, &iomem_resource, (start), (n))
extern void __devm_release_region(struct device *dev, struct resource *parent,
struct ms_status_register {
unsigned char reserved;
unsigned char interrupt;
-#define MEMSTICK_INT_CMDNAK 0x0001
-#define MEMSTICK_INT_IOREQ 0x0008
-#define MEMSTICK_INT_IOBREQ 0x0010
-#define MEMSTICK_INT_BREQ 0x0020
-#define MEMSTICK_INT_ERR 0x0040
-#define MEMSTICK_INT_CED 0x0080
+#define MEMSTICK_INT_CMDNAK 0x01
+#define MEMSTICK_INT_IOREQ 0x08
+#define MEMSTICK_INT_IOBREQ 0x10
+#define MEMSTICK_INT_BREQ 0x20
+#define MEMSTICK_INT_ERR 0x40
+#define MEMSTICK_INT_CED 0x80
unsigned char status0;
-#define MEMSTICK_STATUS0_WP 0x0001
-#define MEMSTICK_STATUS0_SL 0x0002
-#define MEMSTICK_STATUS0_BF 0x0010
-#define MEMSTICK_STATUS0_BE 0x0020
-#define MEMSTICK_STATUS0_FB0 0x0040
-#define MEMSTICK_STATUS0_MB 0x0080
+#define MEMSTICK_STATUS0_WP 0x01
+#define MEMSTICK_STATUS0_SL 0x02
+#define MEMSTICK_STATUS0_BF 0x10
+#define MEMSTICK_STATUS0_BE 0x20
+#define MEMSTICK_STATUS0_FB0 0x40
+#define MEMSTICK_STATUS0_MB 0x80
unsigned char status1;
-#define MEMSTICK_STATUS1_UCFG 0x0001
-#define MEMSTICK_STATUS1_FGER 0x0002
-#define MEMSTICK_STATUS1_UCEX 0x0004
-#define MEMSTICK_STATUS1_EXER 0x0008
-#define MEMSTICK_STATUS1_UCDT 0x0010
-#define MEMSTICK_STATUS1_DTER 0x0020
-#define MEMSTICK_STATUS1_FBI 0x0040
-#define MEMSTICK_STATUS1_MB 0x0080
+#define MEMSTICK_STATUS1_UCFG 0x01
+#define MEMSTICK_STATUS1_FGER 0x02
+#define MEMSTICK_STATUS1_UCEX 0x04
+#define MEMSTICK_STATUS1_EXER 0x08
+#define MEMSTICK_STATUS1_UCDT 0x10
+#define MEMSTICK_STATUS1_DTER 0x20
+#define MEMSTICK_STATUS1_FB1 0x40
+#define MEMSTICK_STATUS1_MB 0x80
} __attribute__((packed));
struct ms_id_register {
struct ms_param_register {
unsigned char system;
-#define MEMSTICK_SYS_ATEN 0xc0
-#define MEMSTICK_SYS_BAMD 0x80
#define MEMSTICK_SYS_PAM 0x08
+#define MEMSTICK_SYS_BAMD 0x80
unsigned char block_address_msb;
unsigned short block_address;
unsigned char cp;
-#define MEMSTICK_CP_BLOCK 0x0000
-#define MEMSTICK_CP_PAGE 0x0020
-#define MEMSTICK_CP_EXTRA 0x0040
-#define MEMSTICK_CP_OVERWRITE 0x0080
+#define MEMSTICK_CP_BLOCK 0x00
+#define MEMSTICK_CP_PAGE 0x20
+#define MEMSTICK_CP_EXTRA 0x40
+#define MEMSTICK_CP_OVERWRITE 0x80
unsigned char page_address;
} __attribute__((packed));
struct ms_extra_data_register {
unsigned char overwrite_flag;
-#define MEMSTICK_OVERWRITE_UPDATA 0x0010
-#define MEMSTICK_OVERWRITE_PAGE 0x0060
-#define MEMSTICK_OVERWRITE_BLOCK 0x0080
+#define MEMSTICK_OVERWRITE_UDST 0x10
+#define MEMSTICK_OVERWRITE_PGST1 0x20
+#define MEMSTICK_OVERWRITE_PGST0 0x40
+#define MEMSTICK_OVERWRITE_BKST 0x80
unsigned char management_flag;
-#define MEMSTICK_MANAGEMENT_SYSTEM 0x0004
-#define MEMSTICK_MANAGEMENT_TRANS_TABLE 0x0008
-#define MEMSTICK_MANAGEMENT_COPY 0x0010
-#define MEMSTICK_MANAGEMENT_ACCESS 0x0020
+#define MEMSTICK_MANAGEMENT_SYSFLG 0x04
+#define MEMSTICK_MANAGEMENT_ATFLG 0x08
+#define MEMSTICK_MANAGEMENT_SCMS1 0x10
+#define MEMSTICK_MANAGEMENT_SCMS0 0x20
unsigned short logical_address;
} __attribute__((packed));
struct mspro_param_register {
unsigned char system;
-#define MEMSTICK_SYS_SERIAL 0x80
#define MEMSTICK_SYS_PAR4 0x00
#define MEMSTICK_SYS_PAR8 0x40
+#define MEMSTICK_SYS_SERIAL 0x80
unsigned short data_count;
unsigned int data_address;
unsigned char w_length;
} __attribute__((packed));
-enum {
+enum memstick_tpc {
MS_TPC_READ_MG_STATUS = 0x01,
MS_TPC_READ_LONG_DATA = 0x02,
MS_TPC_READ_SHORT_DATA = 0x03,
MS_TPC_SET_CMD = 0x0e
};
-enum {
+enum memstick_command {
MS_CMD_BLOCK_END = 0x33,
MS_CMD_RESET = 0x3c,
MS_CMD_BLOCK_WRITE = 0x55,
/*** Driver structures and functions ***/
-#define MEMSTICK_PART_SHIFT 3
-
enum memstick_param { MEMSTICK_POWER = 1, MEMSTICK_INTERFACE };
#define MEMSTICK_POWER_OFF 0
struct memstick_host;
struct memstick_driver;
+struct memstick_device_id {
+ unsigned char match_flags;
#define MEMSTICK_MATCH_ALL 0x01
+ unsigned char type;
#define MEMSTICK_TYPE_LEGACY 0xff
#define MEMSTICK_TYPE_DUO 0x00
#define MEMSTICK_TYPE_PRO 0x01
+ unsigned char category;
#define MEMSTICK_CATEGORY_STORAGE 0xff
#define MEMSTICK_CATEGORY_STORAGE_DUO 0x00
+#define MEMSTICK_CATEGORY_IO 0x01
+#define MEMSTICK_CATEGORY_IO_PRO 0x10
-#define MEMSTICK_CLASS_GENERIC 0xff
-#define MEMSTICK_CLASS_GENERIC_DUO 0x00
-
-
-struct memstick_device_id {
- unsigned char match_flags;
- unsigned char type;
- unsigned char category;
unsigned char class;
+#define MEMSTICK_CLASS_FLASH 0xff
+#define MEMSTICK_CLASS_DUO 0x00
+#define MEMSTICK_CLASS_ROM 0x01
+#define MEMSTICK_CLASS_RO 0x02
+#define MEMSTICK_CLASS_WP 0x03
};
struct memstick_request {
void memstick_resume_host(struct memstick_host *host);
void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
- struct scatterlist *sg);
+ const struct scatterlist *sg);
void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
- void *buf, size_t length);
+ const void *buf, size_t length);
int memstick_next_req(struct memstick_host *host,
struct memstick_request **mrq);
void memstick_new_req(struct memstick_host *host);
*
* This function returns the next zone at or below a given zone index that is
* within the allowed nodemask using a cursor as the starting point for the
- * search. The zoneref returned is a cursor that is used as the next starting
- * point for future calls to next_zones_zonelist().
+ * search. The zoneref returned is a cursor that represents the current zone
+ * being examined. It should be advanced by one before calling
+ * next_zones_zonelist again.
*/
struct zoneref *next_zones_zonelist(struct zoneref *z,
enum zone_type highest_zoneidx,
*
* This function returns the first zone at or below a given zone index that is
* within the allowed nodemask. The zoneref returned is a cursor that can be
- * used to iterate the zonelist with next_zones_zonelist. The cursor should
- * not be used by the caller as it does not match the value of the zone
- * returned.
+ * used to iterate the zonelist with next_zones_zonelist by advancing it by
+ * one before calling.
*/
static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist,
enum zone_type highest_zoneidx,
#define for_each_zone_zonelist_nodemask(zone, z, zlist, highidx, nodemask) \
for (z = first_zones_zonelist(zlist, highidx, nodemask, &zone); \
zone; \
- z = next_zones_zonelist(z, highidx, nodemask, &zone)) \
+ z = next_zones_zonelist(++z, highidx, nodemask, &zone)) \
/**
* for_each_zone_zonelist - helper macro to iterate over valid zones in a zonelist at or below a given zone index
/*
* Resource Management
*/
+#ifdef CONFIG_PNP
struct resource *pnp_get_resource(struct pnp_dev *, unsigned int, unsigned int);
+#else
+static inline struct resource *pnp_get_resource(struct pnp_dev *dev, unsigned int type, unsigned int num)
+{
+ return NULL;
+}
+#endif
static inline int pnp_resource_valid(struct resource *res)
{
*/
static inline int nla_ok(const struct nlattr *nla, int remaining)
{
- return remaining >= sizeof(*nla) &&
+ return remaining >= (int) sizeof(*nla) &&
nla->nla_len >= sizeof(*nla) &&
nla->nla_len <= remaining;
}
__u8 scsi_lun[8];
};
+/*
+ * The Well Known LUNS (SAM-3) in our int representation of a LUN
+ */
+#define SCSI_W_LUN_BASE 0xc100
+#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
+#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
+#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
+
+static inline int scsi_is_wlun(unsigned int lun)
+{
+ return (lun & 0xff00) == SCSI_W_LUN_BASE;
+}
+
+
/*
* MESSAGE CODES
*/
/**
* update_tasks_cpumask - Update the cpumasks of tasks in the cpuset.
* @cs: the cpuset in which each task's cpus_allowed mask needs to be changed
+ * @heap: if NULL, defer allocating heap memory to cgroup_scan_tasks()
*
* Called with cgroup_mutex held
*
* The cgroup_scan_tasks() function will scan all the tasks in a cgroup,
* calling callback functions for each.
*
- * Return 0 if successful, -errno if not.
+ * No return value. It's guaranteed that cgroup_scan_tasks() always returns 0
+ * if @heap != NULL.
*/
-static int update_tasks_cpumask(struct cpuset *cs)
+static void update_tasks_cpumask(struct cpuset *cs, struct ptr_heap *heap)
{
struct cgroup_scanner scan;
- struct ptr_heap heap;
- int retval;
-
- /*
- * cgroup_scan_tasks() will initialize heap->gt for us.
- * heap_init() is still needed here for we should not change
- * cs->cpus_allowed when heap_init() fails.
- */
- retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
- if (retval)
- return retval;
scan.cg = cs->css.cgroup;
scan.test_task = cpuset_test_cpumask;
scan.process_task = cpuset_change_cpumask;
- scan.heap = &heap;
- retval = cgroup_scan_tasks(&scan);
-
- heap_free(&heap);
- return retval;
+ scan.heap = heap;
+ cgroup_scan_tasks(&scan);
}
/**
*/
static int update_cpumask(struct cpuset *cs, const char *buf)
{
+ struct ptr_heap heap;
struct cpuset trialcs;
int retval;
int is_load_balanced;
if (cpus_equal(cs->cpus_allowed, trialcs.cpus_allowed))
return 0;
+ retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
+ if (retval)
+ return retval;
+
is_load_balanced = is_sched_load_balance(&trialcs);
mutex_lock(&callback_mutex);
* Scan tasks in the cpuset, and update the cpumasks of any
* that need an update.
*/
- retval = update_tasks_cpumask(cs);
- if (retval < 0)
- return retval;
+ update_tasks_cpumask(cs, &heap);
+
+ heap_free(&heap);
if (is_load_balanced)
async_rebuild_sched_domains();
nodes_empty(cp->mems_allowed))
remove_tasks_in_empty_cpuset(cp);
else {
- update_tasks_cpumask(cp);
+ update_tasks_cpumask(cp, NULL);
update_tasks_nodemask(cp, &oldmems);
}
}
{
unsigned int offset = 0;
struct sg_mapping_iter miter;
+ unsigned long flags;
sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
+ local_irq_save(flags);
+
while (sg_miter_next(&miter) && offset < buflen) {
unsigned int len;
sg_miter_stop(&miter);
+ local_irq_restore(flags);
return offset;
}
* the lowest available address range.
*/
dma_addr_t handle;
- handle = swiotlb_map_single(NULL, NULL, size, DMA_FROM_DEVICE);
+ handle = swiotlb_map_single(hwdev, NULL, size, DMA_FROM_DEVICE);
if (swiotlb_dma_mapping_error(hwdev, handle))
return NULL;
(z->zone && !zref_in_nodemask(z, nodes)))
z++;
- *zone = zonelist_zone(z++);
+ *zone = zonelist_zone(z);
return z;
}
INIT_LIST_HEAD(&n->partial);
#ifdef CONFIG_SLUB_DEBUG
atomic_long_set(&n->nr_slabs, 0);
+ atomic_long_set(&n->total_objects, 0);
INIT_LIST_HEAD(&n->full);
#endif
}
{
int ret;
+ if (!test_bit(HCI_UP, &hdev->flags))
+ return -ENETDOWN;
+
/* Serialize all requests */
hci_req_lock(hdev);
ret = __hci_request(hdev, req, opt, timeout);
return 0;
}
+static int __udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
+{
+ int is_udplite = IS_UDPLITE(sk);
+ int rc;
+
+ if ((rc = sock_queue_rcv_skb(sk, skb)) < 0) {
+ /* Note that an ENOMEM error is charged twice */
+ if (rc == -ENOMEM)
+ UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_RCVBUFERRORS,
+ is_udplite);
+ goto drop;
+ }
+
+ return 0;
+
+drop:
+ UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
+ kfree_skb(skb);
+ return -1;
+}
+
/* returns:
* -1: error
* 0: success
up->encap_rcv != NULL) {
int ret;
- bh_unlock_sock(sk);
ret = (*up->encap_rcv)(sk, skb);
- bh_lock_sock(sk);
if (ret <= 0) {
UDP_INC_STATS_BH(sock_net(sk),
UDP_MIB_INDATAGRAMS,
goto drop;
}
- if ((rc = sock_queue_rcv_skb(sk,skb)) < 0) {
- /* Note that an ENOMEM error is charged twice */
- if (rc == -ENOMEM) {
- UDP_INC_STATS_BH(sock_net(sk),
- UDP_MIB_RCVBUFERRORS, is_udplite);
- atomic_inc(&sk->sk_drops);
- }
- goto drop;
- }
+ rc = 0;
- return 0;
+ bh_lock_sock(sk);
+ if (!sock_owned_by_user(sk))
+ rc = __udp_queue_rcv_skb(sk, skb);
+ else
+ sk_add_backlog(sk, skb);
+ bh_unlock_sock(sk);
+
+ return rc;
drop:
UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
skb1 = skb_clone(skb, GFP_ATOMIC);
if (skb1) {
- int ret = 0;
-
- bh_lock_sock(sk);
- if (!sock_owned_by_user(sk))
- ret = udp_queue_rcv_skb(sk, skb1);
- else
- sk_add_backlog(sk, skb1);
- bh_unlock_sock(sk);
-
+ int ret = udp_queue_rcv_skb(sk, skb1);
if (ret > 0)
/* we should probably re-process instead
* of dropping packets here. */
uh->dest, inet_iif(skb), udptable);
if (sk != NULL) {
- int ret = 0;
- bh_lock_sock(sk);
- if (!sock_owned_by_user(sk))
- ret = udp_queue_rcv_skb(sk, skb);
- else
- sk_add_backlog(sk, skb);
- bh_unlock_sock(sk);
+ int ret = udp_queue_rcv_skb(sk, skb);
sock_put(sk);
/* a return value > 0 means to resubmit the input, but
.sendmsg = udp_sendmsg,
.recvmsg = udp_recvmsg,
.sendpage = udp_sendpage,
- .backlog_rcv = udp_queue_rcv_skb,
+ .backlog_rcv = __udp_queue_rcv_skb,
.hash = udp_lib_hash,
.unhash = udp_lib_unhash,
.get_port = udp_v4_get_port,
time_after(jiffies, (dev->trans_start +
dev->watchdog_timeo))) {
char drivername[64];
- printk(KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit timed out\n",
+ WARN_ONCE(1, KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit timed out\n",
dev->name, netdev_drivername(dev, drivername, 64));
dev->tx_timeout(dev);
- WARN_ON_ONCE(1);
}
if (!mod_timer(&dev->watchdog_timer,
round_jiffies(jiffies +
/* Check to see if this is a duplicate. */
peer = sctp_assoc_lookup_paddr(asoc, addr);
if (peer) {
+ /* An UNKNOWN state is only set on transports added by
+ * user in sctp_connectx() call. Such transports should be
+ * considered CONFIRMED per RFC 4960, Section 5.4.
+ */
if (peer->state == SCTP_UNKNOWN) {
- if (peer_state == SCTP_ACTIVE)
- peer->state = SCTP_ACTIVE;
- if (peer_state == SCTP_UNCONFIRMED)
- peer->state = SCTP_UNCONFIRMED;
+ peer->state = SCTP_ACTIVE;
}
return peer;
}
if (!(dst->dev->features & NETIF_F_NO_CSUM)) {
crc32 = sctp_start_cksum((__u8 *)sh, cksum_buf_len);
crc32 = sctp_end_cksum(crc32);
- }
+ } else
+ nskb->ip_summed = CHECKSUM_UNNECESSARY;
/* 3) Put the resultant value into the checksum field in the
* common header, and leave the rest of the bits unchanged.
/* if the peer reports AUTH, assume that he
* supports AUTH.
*/
- asoc->peer.auth_capable = 1;
+ if (sctp_auth_enable)
+ asoc->peer.auth_capable = 1;
break;
case SCTP_CID_ASCONF:
case SCTP_CID_ASCONF_ACK:
- asoc->peer.asconf_capable = 1;
+ if (sctp_addip_enable)
+ asoc->peer.asconf_capable = 1;
break;
default:
break;
/* Release the transport structures. */
list_for_each_safe(pos, temp, &asoc->peer.transport_addr_list) {
transport = list_entry(pos, struct sctp_transport, transports);
- list_del_init(pos);
- sctp_transport_free(transport);
+ if (transport->state != SCTP_ACTIVE)
+ sctp_assoc_rm_peer(asoc, transport);
}
- asoc->peer.transport_count = 0;
-
nomem:
return 0;
}
break;
case SCTP_PARAM_SET_PRIMARY:
+ if (!sctp_addip_enable)
+ goto fall_through;
+
addr_param = param.v + sizeof(sctp_addip_param_t);
af = sctp_get_af_specific(param_type2af(param.p->type));
git.openpandora.org / pandora-kernel.git / commitdiff