backlight: Kconfig cleanup

Cleanup the "depends on" logic by wrapping the affected config options in
appropriate if/endif blocks.

Remove all the "default n" since that is the default default.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index c025c84..4dfb5f4 100644 (file)
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -8,12 +8,13 @@ menuconfig BACKLIGHT_LCD_SUPPORT
          Enable this to be able to choose the drivers for controlling the
          backlight and the LCD panel on some platforms, for example on PDAs.
 
+if BACKLIGHT_LCD_SUPPORT
+
 #
 # LCD
 #
 config LCD_CLASS_DEVICE
         tristate "Lowlevel LCD controls"
-       depends on BACKLIGHT_LCD_SUPPORT
        default m
        help
          This framework adds support for low-level control of LCD.
@@ -24,31 +25,32 @@ config LCD_CLASS_DEVICE
          To have support for your specific LCD panel you will have to
          select the proper drivers which depend on this option.
 
+if LCD_CLASS_DEVICE
+
 config LCD_CORGI
        tristate "LCD Panel support for SHARP corgi/spitz model"
-       depends on LCD_CLASS_DEVICE && SPI_MASTER && PXA_SHARPSL
+       depends on SPI_MASTER && PXA_SHARPSL
        help
          Say y here to support the LCD panels usually found on SHARP
          corgi (C7x0) and spitz (Cxx00) models.
 
 config LCD_L4F00242T03
        tristate "Epson L4F00242T03 LCD"
-       depends on LCD_CLASS_DEVICE && SPI_MASTER && GENERIC_GPIO
+       depends on SPI_MASTER && GENERIC_GPIO
        help
          SPI driver for Epson L4F00242T03. This provides basic support
          for init and powering the LCD up/down through a sysfs interface.
 
 config LCD_LMS283GF05
        tristate "Samsung LMS283GF05 LCD"
-       depends on LCD_CLASS_DEVICE && SPI_MASTER && GENERIC_GPIO
+       depends on SPI_MASTER && GENERIC_GPIO
        help
          SPI driver for Samsung LMS283GF05. This provides basic support
          for powering the LCD up/down through a sysfs interface.
 
 config LCD_LTV350QV
        tristate "Samsung LTV350QV LCD Panel"
-       depends on LCD_CLASS_DEVICE && SPI_MASTER
-       default n
+       depends on SPI_MASTER
        help
          If you have a Samsung LTV350QV LCD panel, say y to include a
          power control driver for it.  The panel starts up in power
@@ -59,60 +61,53 @@ config LCD_LTV350QV
 
 config LCD_ILI9320
        tristate
-       depends on LCD_CLASS_DEVICE && BACKLIGHT_LCD_SUPPORT
-       default n
        help
          If you have a panel based on the ILI9320 controller chip
          then say y to include a power driver for it.
 
 config LCD_TDO24M
        tristate "Toppoly TDO24M  and TDO35S LCD Panels support"
-       depends on LCD_CLASS_DEVICE && SPI_MASTER
-       default n
+       depends on SPI_MASTER
        help
          If you have a Toppoly TDO24M/TDO35S series LCD panel, say y here to
          include the support for it.
 
 config LCD_VGG2432A4
        tristate "VGG2432A4 LCM device support"
-       depends on BACKLIGHT_LCD_SUPPORT && LCD_CLASS_DEVICE && SPI_MASTER
+       depends on SPI_MASTER
        select LCD_ILI9320
-       default n
        help
          If you have a VGG2432A4 panel based on the ILI9320 controller chip
          then say y to include a power driver for it.
 
 config LCD_PLATFORM
        tristate "Platform LCD controls"
-       depends on LCD_CLASS_DEVICE
        help
          This driver provides a platform-device registered LCD power
          control interface.
 
 config LCD_TOSA
        tristate "Sharp SL-6000 LCD Driver"
-       depends on LCD_CLASS_DEVICE && SPI
-       depends on MACH_TOSA
-       default n
+       depends on SPI && MACH_TOSA
        help
          If you have an Sharp SL-6000 Zaurus say Y to enable a driver
          for its LCD.
 
 config LCD_HP700
        tristate "HP Jornada 700 series LCD Driver"
-       depends on LCD_CLASS_DEVICE
        depends on SA1100_JORNADA720_SSP && !PREEMPT
        default y
        help
          If you have an HP Jornada 700 series handheld (710/720/728)
          say Y to enable LCD control driver.
 
+endif # LCD_CLASS_DEVICE
+
 #
 # Backlight
 #
 config BACKLIGHT_CLASS_DEVICE
         tristate "Lowlevel Backlight controls"
-       depends on BACKLIGHT_LCD_SUPPORT
        default m
        help
          This framework adds support for low-level control of the LCD
@@ -121,9 +116,11 @@ config BACKLIGHT_CLASS_DEVICE
          To have support for your specific LCD panel you will have to
          select the proper drivers which depend on this option.
 
+if BACKLIGHT_CLASS_DEVICE
+
 config BACKLIGHT_ATMEL_LCDC
        bool "Atmel LCDC Contrast-as-Backlight control"
-       depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL
+       depends on FB_ATMEL
        default y if MACH_SAM9261EK || MACH_SAM9G10EK || MACH_SAM9263EK
        help
          This provides a backlight control internal to the Atmel LCDC
@@ -136,8 +133,7 @@ config BACKLIGHT_ATMEL_LCDC
 
 config BACKLIGHT_ATMEL_PWM
        tristate "Atmel PWM backlight control"
-       depends on BACKLIGHT_CLASS_DEVICE && ATMEL_PWM
-       default n
+       depends on ATMEL_PWM
        help
          Say Y here if you want to use the PWM peripheral in Atmel AT91 and
          AVR32 devices. This driver will need additional platform data to know
@@ -148,7 +144,6 @@ config BACKLIGHT_ATMEL_PWM
 
 config BACKLIGHT_GENERIC
        tristate "Generic (aka Sharp Corgi) Backlight Driver"
-       depends on BACKLIGHT_CLASS_DEVICE
        default y
        help
          Say y to enable the generic platform backlight driver previously
@@ -157,7 +152,7 @@ config BACKLIGHT_GENERIC
 
 config BACKLIGHT_LOCOMO
        tristate "Sharp LOCOMO LCD/Backlight Driver"
-       depends on BACKLIGHT_CLASS_DEVICE && SHARP_LOCOMO
+       depends on SHARP_LOCOMO
        default y
        help
          If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to
@@ -165,7 +160,7 @@ config BACKLIGHT_LOCOMO
 
 config BACKLIGHT_OMAP1
        tristate "OMAP1 PWL-based LCD Backlight"
-       depends on BACKLIGHT_CLASS_DEVICE && ARCH_OMAP1
+       depends on ARCH_OMAP1
        default y
        help
          This driver controls the LCD backlight level and power for
@@ -174,7 +169,7 @@ config BACKLIGHT_OMAP1
 
 config BACKLIGHT_HP680
        tristate "HP Jornada 680 Backlight Driver"
-       depends on BACKLIGHT_CLASS_DEVICE && SH_HP6XX
+       depends on SH_HP6XX
        default y
        help
          If you have a HP Jornada 680, say y to enable the
@@ -182,7 +177,6 @@ config BACKLIGHT_HP680
 
 config BACKLIGHT_HP700
        tristate "HP Jornada 700 series Backlight Driver"
-       depends on BACKLIGHT_CLASS_DEVICE
        depends on SA1100_JORNADA720_SSP && !PREEMPT
        default y
        help
@@ -191,76 +185,70 @@ config BACKLIGHT_HP700
 
 config BACKLIGHT_PROGEAR
        tristate "Frontpath ProGear Backlight Driver"
-       depends on BACKLIGHT_CLASS_DEVICE && PCI && X86
-       default n
+       depends on PCI && X86
        help
          If you have a Frontpath ProGear say Y to enable the
          backlight driver.
 
 config BACKLIGHT_CARILLO_RANCH
        tristate "Intel Carillo Ranch Backlight Driver"
-       depends on BACKLIGHT_CLASS_DEVICE && LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578
-       default n
+       depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578
        help
          If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
          backlight driver.
 
 config BACKLIGHT_PWM
        tristate "Generic PWM based Backlight Driver"
-       depends on BACKLIGHT_CLASS_DEVICE && HAVE_PWM
+       depends on HAVE_PWM
        help
          If you have a LCD backlight adjustable by PWM, say Y to enable
          this driver.
 
 config BACKLIGHT_DA903X
        tristate "Backlight Driver for DA9030/DA9034 using WLED"
-       depends on BACKLIGHT_CLASS_DEVICE && PMIC_DA903X
+       depends on PMIC_DA903X
        help
          If you have a LCD backlight connected to the WLED output of DA9030
          or DA9034 WLED output, say Y here to enable this driver.
 
 config BACKLIGHT_MAX8925
        tristate "Backlight driver for MAX8925"
-       depends on BACKLIGHT_CLASS_DEVICE && MFD_MAX8925
+       depends on MFD_MAX8925
        help
          If you have a LCD backlight connected to the WLED output of MAX8925
          WLED output, say Y here to enable this driver.
 
 config BACKLIGHT_MBP_NVIDIA
        tristate "MacBook Pro Nvidia Backlight Driver"
-       depends on BACKLIGHT_CLASS_DEVICE && X86
-       default n
+       depends on X86
        help
          If you have an Apple Macbook Pro with Nvidia graphics hardware say Y
         to enable a driver for its backlight
 
 config BACKLIGHT_TOSA
        tristate "Sharp SL-6000 Backlight Driver"
-       depends on BACKLIGHT_CLASS_DEVICE && I2C
-       depends on MACH_TOSA && LCD_TOSA
-       default n
+       depends on I2C && MACH_TOSA && LCD_TOSA
        help
          If you have an Sharp SL-6000 Zaurus say Y to enable a driver
          for its backlight
 
 config BACKLIGHT_SAHARA
        tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"
-       depends on BACKLIGHT_CLASS_DEVICE && X86
-       default n
+       depends on X86
        help
          If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
          backlight driver.
 
 config BACKLIGHT_WM831X
        tristate "WM831x PMIC Backlight Driver"
-       depends on BACKLIGHT_CLASS_DEVICE && MFD_WM831X
+       depends on MFD_WM831X
        help
          If you have a backlight driven by the ISINK and DCDC of a
          WM831x PMIC say y to enable the backlight driver for it.
 
 config BACKLIGHT_ADX
        tristate "Avionic Design Xanthos Backlight Driver"
-       depends on BACKLIGHT_CLASS_DEVICE && ARCH_PXA_ADX
+       depends on ARCH_PXA_ADX
        default y
        help
          Say Y to enable the backlight driver on Avionic Design Xanthos-based
@@ -268,7 +256,7 @@ config BACKLIGHT_ADX
 
 config BACKLIGHT_ADP5520
        tristate "Backlight Driver for ADP5520/ADP5501 using WLED"
-       depends on BACKLIGHT_CLASS_DEVICE && PMIC_ADP5520
+       depends on PMIC_ADP5520
        help
          If you have a LCD backlight connected to the BST/BL_SNK output of
          ADP5520 or ADP5501, say Y here to enable this driver.
@@ -278,7 +266,10 @@ config BACKLIGHT_ADP5520
 
 config BACKLIGHT_88PM860X
        tristate "Backlight Driver for 88PM8606 using WLED"
-       depends on BACKLIGHT_CLASS_DEVICE && MFD_88PM860X
+       depends on MFD_88PM860X
        help
          Say Y to enable the backlight driver for Marvell 88PM8606.
 
+endif # BACKLIGHT_CLASS_DEVICE
+
+endif # BACKLIGHT_LCD_SUPPORT