(DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
-#define DPLL_FINT_BAND1_MIN 750000
-#define DPLL_FINT_BAND1_MAX 2100000
-#define DPLL_FINT_BAND2_MIN 7500000
-#define DPLL_FINT_BAND2_MAX 21000000
+#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
+#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
+#define OMAP3430_DPLL_FINT_BAND2_MIN 7500000
+#define OMAP3430_DPLL_FINT_BAND2_MAX 21000000
+
+/*
+ * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
+ * From device data manual section 4.3 "DPLL and DLL Specifications".
+ */
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000
+#define OMAP3PLUS_DPLL_FINT_MIN 32000
+#define OMAP3PLUS_DPLL_FINT_MAX 52000000
/* _dpll_test_fint() return codes */
#define DPLL_FINT_UNDERFLOW -1
static int _dpll_test_fint(struct clk *clk, u8 n)
{
struct dpll_data *dd;
- long fint;
+ long fint, fint_min, fint_max;
int ret = 0;
dd = clk->dpll_data;
/* DPLL divider must result in a valid jitter correction val */
fint = clk->parent->rate / n;
- if (fint < DPLL_FINT_BAND1_MIN) {
+ if (cpu_is_omap24xx()) {
+ /* Should not be called for OMAP2, so warn if it is called */
+ WARN(1, "No fint limits available for OMAP2!\n");
+ return DPLL_FINT_INVALID;
+ } else if (cpu_is_omap3430()) {
+ fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
+ fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
+ } else if (dd->flags & DPLL_J_TYPE) {
+ fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
+ fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
+ } else {
+ fint_min = OMAP3PLUS_DPLL_FINT_MIN;
+ fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+ }
+
+ if (fint < fint_min) {
pr_debug("rejecting n=%d due to Fint failure, "
"lowering max_divider\n", n);
dd->max_divider = n;
ret = DPLL_FINT_UNDERFLOW;
-
- } else if (fint > DPLL_FINT_BAND1_MAX &&
- fint < DPLL_FINT_BAND2_MIN) {
-
- pr_debug("rejecting n=%d due to Fint failure\n", n);
- ret = DPLL_FINT_INVALID;
-
- } else if (fint > DPLL_FINT_BAND2_MAX) {
-
+ } else if (fint > fint_max) {
pr_debug("rejecting n=%d due to Fint failure, "
"boosting min_divider\n", n);
dd->min_divider = n;
ret = DPLL_FINT_INVALID;
-
+ } else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX &&
+ fint < OMAP3430_DPLL_FINT_BAND2_MIN) {
+ pr_debug("rejecting n=%d due to Fint failure\n", n);
+ ret = DPLL_FINT_INVALID;
}
return ret;
int omap4_dpllmx_gatectrl_read(struct clk *clk);
void omap4_dpllmx_allow_gatectrl(struct clk *clk);
void omap4_dpllmx_deny_gatectrl(struct clk *clk);
+long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate);
+unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk);
#ifdef CONFIG_OMAP_RESET_CLOCKS
void omap2_clk_disable_unused(struct clk *clk);
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
+/*
+ * OMAP4430_REGM4XEN_MULT: If the CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit is
+ * set, then the DPLL's lock frequency is multiplied by 4 (OMAP4430 TRM
+ * vV Section 3.6.3.3.1 "DPLLs Output Clocks Parameters")
+ */
+#define OMAP4430_REGM4XEN_MULT 4
+
int omap4xxx_clk_init(void);
#endif
.dpll_data = &dpll_abe_dd,
.init = &omap2_init_dpll_parent,
.ops = &clkops_omap3_noncore_dpll_ops,
- .recalc = &omap3_dpll_recalc,
- .round_rate = &omap2_dpll_round_rate,
+ .recalc = &omap4_dpll_regm4xen_recalc,
+ .round_rate = &omap4_dpll_regm4xen_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
};
.recalc = &omap2_clksel_recalc,
};
+static const struct clksel_rate div2_2to1_rates[] = {
+ { .div = 1, .val = 1, .flags = RATE_IN_4430 },
+ { .div = 2, .val = 0, .flags = RATE_IN_4430 },
+ { .div = 0 },
+};
+
+static const struct clksel ocp_abe_iclk_div[] = {
+ { .parent = &aess_fclk, .rates = div2_2to1_rates },
+ { .parent = NULL },
+};
+
static struct clk ocp_abe_iclk = {
.name = "ocp_abe_iclk",
.parent = &aess_fclk,
+ .clksel = ocp_abe_iclk_div,
+ .clksel_reg = OMAP4430_CM1_ABE_AESS_CLKCTRL,
+ .clksel_mask = OMAP4430_CLKSEL_AESS_FCLK_MASK,
.ops = &clkops_null,
- .recalc = &followparent_recalc,
+ .recalc = &omap2_clksel_recalc,
};
static struct clk per_abe_24m_fclk = {
};
static const struct clksel_rate div3_8to32_rates[] = {
- { .div = 8, .val = 0, .flags = RATE_IN_44XX },
- { .div = 16, .val = 1, .flags = RATE_IN_44XX },
- { .div = 32, .val = 2, .flags = RATE_IN_44XX },
+ { .div = 8, .val = 0, .flags = RATE_IN_4460 },
+ { .div = 16, .val = 1, .flags = RATE_IN_4460 },
+ { .div = 32, .val = 2, .flags = RATE_IN_4460 },
{ .div = 0 },
};
struct omap_clk *c;
u32 cpu_clkflg;
- if (cpu_is_omap44xx()) {
+ if (cpu_is_omap443x()) {
cpu_mask = RATE_IN_4430;
cpu_clkflg = CK_443X;
} else if (cpu_is_omap446x()) {
- cpu_mask = RATE_IN_4460;
- cpu_clkflg = CK_446X;
+ cpu_mask = RATE_IN_4460 | RATE_IN_4430;
+ cpu_clkflg = CK_446X | CK_443X;
} else {
return 0;
}
* propagating?
*/
if (!r)
- clk->rate = omap2_get_dpll_rate(clk);
+ clk->rate = (clk->recalc) ? clk->recalc(clk) :
+ omap2_get_dpll_rate(clk);
return r;
}
int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
{
struct clk *new_parent = NULL;
+ unsigned long hw_rate;
u16 freqsel = 0;
struct dpll_data *dd;
int ret;
if (!dd)
return -EINVAL;
- if (rate == omap2_get_dpll_rate(clk))
+ hw_rate = (clk->recalc) ? clk->recalc(clk) : omap2_get_dpll_rate(clk);
+ if (rate == hw_rate)
return 0;
/*
new_parent = dd->clk_bypass;
} else {
if (dd->last_rounded_rate != rate)
- omap2_dpll_round_rate(clk, rate);
+ rate = clk->round_rate(clk, rate);
if (dd->last_rounded_rate == 0)
return -EINVAL;
#include <plat/clock.h>
#include "clock.h"
+#include "clock44xx.h"
#include "cm-regbits-44xx.h"
/* Supported only on OMAP4 */
.deny_idle = omap4_dpllmx_deny_gatectrl,
};
+/**
+ * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to compute the rate for
+ *
+ * Compute the output rate for the OMAP4 DPLL represented by @clk.
+ * Takes the REGM4XEN bit into consideration, which is needed for the
+ * OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers)
+ * upon success, or 0 upon error.
+ */
+unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk)
+{
+ u32 v;
+ unsigned long rate;
+ struct dpll_data *dd;
+
+ if (!clk || !clk->dpll_data)
+ return 0;
+
+ dd = clk->dpll_data;
+
+ rate = omap2_get_dpll_rate(clk);
+
+ /* regm4xen adds a multiplier of 4 to DPLL calculations */
+ v = __raw_readl(dd->control_reg);
+ if (v & OMAP4430_DPLL_REGM4XEN_MASK)
+ rate *= OMAP4430_REGM4XEN_MULT;
+
+ return rate;
+}
+
+/**
+ * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to round a rate for
+ * @target_rate: the desired rate of the DPLL
+ *
+ * Compute the rate that would be programmed into the DPLL hardware
+ * for @clk if set_rate() were to be provided with the rate
+ * @target_rate. Takes the REGM4XEN bit into consideration, which is
+ * needed for the OMAP4 ABE DPLL. Returns the rounded rate (before
+ * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
+ * ~0 if an error occurred in omap2_dpll_round_rate().
+ */
+long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate)
+{
+ u32 v;
+ struct dpll_data *dd;
+ long r;
+
+ if (!clk || !clk->dpll_data)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+
+ /* regm4xen adds a multiplier of 4 to DPLL calculations */
+ v = __raw_readl(dd->control_reg) & OMAP4430_DPLL_REGM4XEN_MASK;
+
+ if (v)
+ target_rate = target_rate / OMAP4430_REGM4XEN_MULT;
+
+ r = omap2_dpll_round_rate(clk, target_rate);
+ if (r == ~0)
+ return r;
+
+ if (v)
+ clk->dpll_data->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
+
+ return clk->dpll_data->last_rounded_rate;
+}
git.openpandora.org / pandora-kernel.git / commitdiff