# Power Management
ifeq ($(CONFIG_PM),y)
-obj-y += pm.o
+obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
+obj-$(CONFIG_PM_DEBUG) += pm-debug.o
endif
# Clock framework
--- /dev/null
+/*
+ * OMAP Power Management debug routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ * Jouni Hogander
+ *
+ * Based on pm.c for omap2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "cm.h"
+#include "pm.h"
+
+int omap2_pm_debug;
+
+#define DUMP_PRM_MOD_REG(mod, reg) \
+ regs[reg_count].name = #mod "." #reg; \
+ regs[reg_count++].val = prm_read_mod_reg(mod, reg)
+#define DUMP_CM_MOD_REG(mod, reg) \
+ regs[reg_count].name = #mod "." #reg; \
+ regs[reg_count++].val = cm_read_mod_reg(mod, reg)
+#define DUMP_PRM_REG(reg) \
+ regs[reg_count].name = #reg; \
+ regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_CM_REG(reg) \
+ regs[reg_count].name = #reg; \
+ regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_INTC_REG(reg, off) \
+ regs[reg_count].name = #reg; \
+ regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
+
+void omap2_pm_dump(int mode, int resume, unsigned int us)
+{
+ struct reg {
+ const char *name;
+ u32 val;
+ } regs[32];
+ int reg_count = 0, i;
+ const char *s1 = NULL, *s2 = NULL;
+
+ if (!resume) {
+#if 0
+ /* MPU */
+ DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
+ DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL);
+ DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL);
+ DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST);
+ DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
+#endif
+#if 0
+ /* INTC */
+ DUMP_INTC_REG(INTC_MIR0, 0x0084);
+ DUMP_INTC_REG(INTC_MIR1, 0x00a4);
+ DUMP_INTC_REG(INTC_MIR2, 0x00c4);
+#endif
+#if 0
+ DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1);
+ if (cpu_is_omap24xx()) {
+ DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+ DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+ OMAP2_PRCM_CLKEMUL_CTRL_OFFSET);
+ DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+ OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
+ }
+ DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN);
+ DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1);
+ DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2);
+ DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
+ DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
+ DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
+ DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST);
+#endif
+#if 0
+ /* DSP */
+ if (cpu_is_omap24xx()) {
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST);
+ }
+#endif
+ } else {
+ DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1);
+ if (cpu_is_omap24xx())
+ DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2);
+ DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST);
+ DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+#if 1
+ DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
+ DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
+ DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
+#endif
+ }
+
+ switch (mode) {
+ case 0:
+ s1 = "full";
+ s2 = "retention";
+ break;
+ case 1:
+ s1 = "MPU";
+ s2 = "retention";
+ break;
+ case 2:
+ s1 = "MPU";
+ s2 = "idle";
+ break;
+ }
+
+ if (!resume)
+#ifdef CONFIG_NO_HZ
+ printk(KERN_INFO
+ "--- Going to %s %s (next timer after %u ms)\n", s1, s2,
+ jiffies_to_msecs(get_next_timer_interrupt(jiffies) -
+ jiffies));
+#else
+ printk(KERN_INFO "--- Going to %s %s\n", s1, s2);
+#endif
+ else
+ printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n",
+ us / 1000, us % 1000);
+
+ for (i = 0; i < reg_count; i++)
+ printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
+}
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap2/pm.c
- *
- * OMAP2 Power Management Routines
- *
- * Copyright (C) 2006 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Based on pm.c for omap1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/atomic.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/pm.h>
-
-static struct clk *vclk;
-static void (*omap2_sram_idle)(void);
-static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
-static void (*saved_idle)(void);
-
-extern void __init pmdomain_init(void);
-extern void pmdomain_set_autoidle(void);
-
-static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
-
-void omap2_pm_idle(void)
-{
- local_irq_disable();
- local_fiq_disable();
- if (need_resched()) {
- local_fiq_enable();
- local_irq_enable();
- return;
- }
-
- omap2_sram_idle();
- local_fiq_enable();
- local_irq_enable();
-}
-
-static int omap2_pm_prepare(void)
-{
- /* We cannot sleep in idle until we have resumed */
- saved_idle = pm_idle;
- pm_idle = NULL;
- return 0;
-}
-
-static int omap2_pm_suspend(void)
-{
- return 0;
-}
-
-static int omap2_pm_enter(suspend_state_t state)
-{
- int ret = 0;
-
- switch (state)
- {
- case PM_SUSPEND_STANDBY:
- case PM_SUSPEND_MEM:
- ret = omap2_pm_suspend();
- break;
- default:
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-static void omap2_pm_finish(void)
-{
- pm_idle = saved_idle;
-}
-
-static struct platform_suspend_ops omap_pm_ops = {
- .prepare = omap2_pm_prepare,
- .enter = omap2_pm_enter,
- .finish = omap2_pm_finish,
- .valid = suspend_valid_only_mem,
-};
-
-static int __init omap2_pm_init(void)
-{
- return 0;
-}
-
-__initcall(omap2_pm_init);
--- /dev/null
+/*
+ * OMAP2/3 Power Management Routines
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Jouni Hogander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
+#define __ARCH_ARM_MACH_OMAP2_PM_H
+
+extern int omap2_pm_init(void);
+extern int omap3_pm_init(void);
+
+#ifdef CONFIG_PM_DEBUG
+extern void omap2_pm_dump(int mode, int resume, unsigned int us);
+extern int omap2_pm_debug;
+#else
+#define omap2_pm_dump(mode, resume, us) do {} while (0);
+#define omap2_pm_debug 0
+#endif /* CONFIG_PM_DEBUG */
+
+extern void omap24xx_idle_loop_suspend(void);
+
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
+ void __iomem *sdrc_power);
+extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
+extern void save_secure_ram_context(u32 *addr);
+
+extern unsigned int omap24xx_idle_loop_suspend_sz;
+extern unsigned int omap34xx_suspend_sz;
+extern unsigned int save_secure_ram_context_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap34xx_cpu_suspend_sz;
+
+#endif
--- /dev/null
+/*
+ * OMAP2 Power Management Routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/suspend.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/time.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+#include "pm.h"
+
+#include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
+
+static void (*omap2_sram_idle)(void);
+static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
+ void __iomem *sdrc_power);
+
+static struct powerdomain *mpu_pwrdm;
+static struct powerdomain *core_pwrdm;
+
+static struct clockdomain *dsp_clkdm;
+static struct clockdomain *gfx_clkdm;
+
+static struct clk *osc_ck, *emul_ck;
+
+static int omap2_fclks_active(void)
+{
+ u32 f1, f2;
+
+ f1 = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+ if (f1 | f2)
+ return 1;
+ return 0;
+}
+
+static int omap2_irq_pending(void)
+{
+ u32 pending_reg = 0x480fe098;
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ if (omap_readl(pending_reg))
+ return 1;
+ pending_reg += 0x20;
+ }
+ return 0;
+}
+
+static void omap2_enter_full_retention(void)
+{
+ u32 l;
+ struct timespec ts_preidle, ts_postidle, ts_idle;
+
+ /* There is 1 reference hold for all children of the oscillator
+ * clock, the following will remove it. If no one else uses the
+ * oscillator itself it will be disabled if/when we enter retention
+ * mode.
+ */
+ clk_disable(osc_ck);
+
+ /* Clear old wake-up events */
+ /* REVISIT: These write to reserved bits? */
+ prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+ prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+ /*
+ * Set MPU powerdomain's next power state to RETENTION;
+ * preserve logic state during retention
+ */
+ pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+ /* Workaround to kill USB */
+ l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
+ omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
+
+ omap2_gpio_prepare_for_retention();
+
+ if (omap2_pm_debug) {
+ omap2_pm_dump(0, 0, 0);
+ getnstimeofday(&ts_preidle);
+ }
+
+ /* One last check for pending IRQs to avoid extra latency due
+ * to sleeping unnecessarily. */
+ if (omap2_irq_pending())
+ goto no_sleep;
+
+ /* Jump to SRAM suspend code */
+ omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
+ OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
+ OMAP_SDRC_REGADDR(SDRC_POWER));
+no_sleep:
+
+ if (omap2_pm_debug) {
+ unsigned long long tmp;
+
+ getnstimeofday(&ts_postidle);
+ ts_idle = timespec_sub(ts_postidle, ts_preidle);
+ tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+ omap2_pm_dump(0, 1, tmp);
+ }
+ omap2_gpio_resume_after_retention();
+
+ clk_enable(osc_ck);
+
+ /* clear CORE wake-up events */
+ prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+
+ /* wakeup domain events - bit 1: GPT1, bit5 GPIO */
+ prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
+
+ /* MPU domain wake events */
+ l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+ if (l & 0x01)
+ prm_write_mod_reg(0x01, OCP_MOD,
+ OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+ if (l & 0x20)
+ prm_write_mod_reg(0x20, OCP_MOD,
+ OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+
+ /* Mask future PRCM-to-MPU interrupts */
+ prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+}
+
+static int omap2_i2c_active(void)
+{
+ u32 l;
+
+ l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1);
+}
+
+static int sti_console_enabled;
+
+static int omap2_allow_mpu_retention(void)
+{
+ u32 l;
+
+ /* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
+ l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 |
+ OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 |
+ OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1))
+ return 0;
+ /* Check for UART3. */
+ l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+ if (l & OMAP24XX_EN_UART3)
+ return 0;
+ if (sti_console_enabled)
+ return 0;
+
+ return 1;
+}
+
+static void omap2_enter_mpu_retention(void)
+{
+ int only_idle = 0;
+ struct timespec ts_preidle, ts_postidle, ts_idle;
+
+ /* Putting MPU into the WFI state while a transfer is active
+ * seems to cause the I2C block to timeout. Why? Good question. */
+ if (omap2_i2c_active())
+ return;
+
+ /* The peripherals seem not to be able to wake up the MPU when
+ * it is in retention mode. */
+ if (omap2_allow_mpu_retention()) {
+ /* REVISIT: These write to reserved bits? */
+ prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+ prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+ /* Try to enter MPU retention */
+ prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
+ OMAP_LOGICRETSTATE,
+ MPU_MOD, PM_PWSTCTRL);
+ } else {
+ /* Block MPU retention */
+
+ prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD, PM_PWSTCTRL);
+ only_idle = 1;
+ }
+
+ if (omap2_pm_debug) {
+ omap2_pm_dump(only_idle ? 2 : 1, 0, 0);
+ getnstimeofday(&ts_preidle);
+ }
+
+ omap2_sram_idle();
+
+ if (omap2_pm_debug) {
+ unsigned long long tmp;
+
+ getnstimeofday(&ts_postidle);
+ ts_idle = timespec_sub(ts_postidle, ts_preidle);
+ tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+ omap2_pm_dump(only_idle ? 2 : 1, 1, tmp);
+ }
+}
+
+static int omap2_can_sleep(void)
+{
+ if (omap2_fclks_active())
+ return 0;
+ if (osc_ck->usecount > 1)
+ return 0;
+ if (omap_dma_running())
+ return 0;
+
+ return 1;
+}
+
+static void omap2_pm_idle(void)
+{
+ local_irq_disable();
+ local_fiq_disable();
+
+ if (!omap2_can_sleep()) {
+ if (omap2_irq_pending())
+ goto out;
+ omap2_enter_mpu_retention();
+ goto out;
+ }
+
+ if (omap2_irq_pending())
+ goto out;
+
+ omap2_enter_full_retention();
+
+out:
+ local_fiq_enable();
+ local_irq_enable();
+}
+
+static int omap2_pm_prepare(void)
+{
+ /* We cannot sleep in idle until we have resumed */
+ disable_hlt();
+ return 0;
+}
+
+static int omap2_pm_suspend(void)
+{
+ u32 wken_wkup, mir1;
+
+ wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+ prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN);
+
+ /* Mask GPT1 */
+ mir1 = omap_readl(0x480fe0a4);
+ omap_writel(1 << 5, 0x480fe0ac);
+
+ omap2_enter_full_retention();
+
+ omap_writel(mir1, 0x480fe0a4);
+ prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
+
+ return 0;
+}
+
+static int omap2_pm_enter(suspend_state_t state)
+{
+ int ret = 0;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ ret = omap2_pm_suspend();
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void omap2_pm_finish(void)
+{
+ enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+ .prepare = omap2_pm_prepare,
+ .enter = omap2_pm_enter,
+ .finish = omap2_pm_finish,
+ .valid = suspend_valid_only_mem,
+};
+
+static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm)
+{
+ omap2_clkdm_allow_idle(clkdm);
+ return 0;
+}
+
+static void __init prcm_setup_regs(void)
+{
+ int i, num_mem_banks;
+ struct powerdomain *pwrdm;
+
+ /* Enable autoidle */
+ prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD,
+ OMAP2_PRCM_SYSCONFIG_OFFSET);
+
+ /* Set all domain wakeup dependencies */
+ prm_write_mod_reg(OMAP_EN_WKUP_MASK, MPU_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP24XX_DSP_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, CORE_MOD, PM_WKDEP);
+ if (cpu_is_omap2430())
+ prm_write_mod_reg(0, OMAP2430_MDM_MOD, PM_WKDEP);
+
+ /*
+ * Set CORE powerdomain memory banks to retain their contents
+ * during RETENTION
+ */
+ num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm);
+ for (i = 0; i < num_mem_banks; i++)
+ pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
+
+ /* Set CORE powerdomain's next power state to RETENTION */
+ pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
+
+ /*
+ * Set MPU powerdomain's next power state to RETENTION;
+ * preserve logic state during retention
+ */
+ pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+ /* Force-power down DSP, GFX powerdomains */
+
+ pwrdm = clkdm_get_pwrdm(dsp_clkdm);
+ pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+ omap2_clkdm_sleep(dsp_clkdm);
+
+ pwrdm = clkdm_get_pwrdm(gfx_clkdm);
+ pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+ omap2_clkdm_sleep(gfx_clkdm);
+
+ /* Enable clockdomain hardware-supervised control for all clkdms */
+ clkdm_for_each(_pm_clkdm_enable_hwsup);
+
+ /* Enable clock autoidle for all domains */
+ cm_write_mod_reg(OMAP24XX_AUTO_CAM |
+ OMAP24XX_AUTO_MAILBOXES |
+ OMAP24XX_AUTO_WDT4 |
+ OMAP2420_AUTO_WDT3 |
+ OMAP24XX_AUTO_MSPRO |
+ OMAP2420_AUTO_MMC |
+ OMAP24XX_AUTO_FAC |
+ OMAP2420_AUTO_EAC |
+ OMAP24XX_AUTO_HDQ |
+ OMAP24XX_AUTO_UART2 |
+ OMAP24XX_AUTO_UART1 |
+ OMAP24XX_AUTO_I2C2 |
+ OMAP24XX_AUTO_I2C1 |
+ OMAP24XX_AUTO_MCSPI2 |
+ OMAP24XX_AUTO_MCSPI1 |
+ OMAP24XX_AUTO_MCBSP2 |
+ OMAP24XX_AUTO_MCBSP1 |
+ OMAP24XX_AUTO_GPT12 |
+ OMAP24XX_AUTO_GPT11 |
+ OMAP24XX_AUTO_GPT10 |
+ OMAP24XX_AUTO_GPT9 |
+ OMAP24XX_AUTO_GPT8 |
+ OMAP24XX_AUTO_GPT7 |
+ OMAP24XX_AUTO_GPT6 |
+ OMAP24XX_AUTO_GPT5 |
+ OMAP24XX_AUTO_GPT4 |
+ OMAP24XX_AUTO_GPT3 |
+ OMAP24XX_AUTO_GPT2 |
+ OMAP2420_AUTO_VLYNQ |
+ OMAP24XX_AUTO_DSS,
+ CORE_MOD, CM_AUTOIDLE1);
+ cm_write_mod_reg(OMAP24XX_AUTO_UART3 |
+ OMAP24XX_AUTO_SSI |
+ OMAP24XX_AUTO_USB,
+ CORE_MOD, CM_AUTOIDLE2);
+ cm_write_mod_reg(OMAP24XX_AUTO_SDRC |
+ OMAP24XX_AUTO_GPMC |
+ OMAP24XX_AUTO_SDMA,
+ CORE_MOD, CM_AUTOIDLE3);
+ cm_write_mod_reg(OMAP24XX_AUTO_PKA |
+ OMAP24XX_AUTO_AES |
+ OMAP24XX_AUTO_RNG |
+ OMAP24XX_AUTO_SHA |
+ OMAP24XX_AUTO_DES,
+ CORE_MOD, OMAP24XX_CM_AUTOIDLE4);
+
+ cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+
+ /* Put DPLL and both APLLs into autoidle mode */
+ cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) |
+ (0x03 << OMAP24XX_AUTO_96M_SHIFT) |
+ (0x03 << OMAP24XX_AUTO_54M_SHIFT),
+ PLL_MOD, CM_AUTOIDLE);
+
+ cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL |
+ OMAP24XX_AUTO_WDT1 |
+ OMAP24XX_AUTO_MPU_WDT |
+ OMAP24XX_AUTO_GPIOS |
+ OMAP24XX_AUTO_32KSYNC |
+ OMAP24XX_AUTO_GPT1,
+ WKUP_MOD, CM_AUTOIDLE);
+
+ /* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
+ * stabilisation */
+ prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+ OMAP2_PRCM_CLKSSETUP_OFFSET);
+
+ /* Configure automatic voltage transition */
+ prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+ OMAP2_PRCM_VOLTSETUP_OFFSET);
+ prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT |
+ (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
+ OMAP24XX_MEMRETCTRL |
+ (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
+ (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
+ OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
+
+ /* Enable wake-up events */
+ prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1,
+ WKUP_MOD, PM_WKEN);
+}
+
+int __init omap2_pm_init(void)
+{
+ u32 l;
+
+ if (!cpu_is_omap24xx())
+ return -ENODEV;
+
+ printk(KERN_INFO "Power Management for OMAP2 initializing\n");
+ l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
+ printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
+
+ /* Look up important powerdomains, clockdomains */
+
+ mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+ if (!mpu_pwrdm)
+ pr_err("PM: mpu_pwrdm not found\n");
+
+ core_pwrdm = pwrdm_lookup("core_pwrdm");
+ if (!core_pwrdm)
+ pr_err("PM: core_pwrdm not found\n");
+
+ dsp_clkdm = clkdm_lookup("dsp_clkdm");
+ if (!dsp_clkdm)
+ pr_err("PM: mpu_clkdm not found\n");
+
+ gfx_clkdm = clkdm_lookup("gfx_clkdm");
+ if (!gfx_clkdm)
+ pr_err("PM: gfx_clkdm not found\n");
+
+
+ osc_ck = clk_get(NULL, "osc_ck");
+ if (IS_ERR(osc_ck)) {
+ printk(KERN_ERR "could not get osc_ck\n");
+ return -ENODEV;
+ }
+
+ if (cpu_is_omap242x()) {
+ emul_ck = clk_get(NULL, "emul_ck");
+ if (IS_ERR(emul_ck)) {
+ printk(KERN_ERR "could not get emul_ck\n");
+ clk_put(osc_ck);
+ return -ENODEV;
+ }
+ }
+
+ prcm_setup_regs();
+
+ /* Hack to prevent MPU retention when STI console is enabled. */
+ {
+ const struct omap_sti_console_config *sti;
+
+ sti = omap_get_config(OMAP_TAG_STI_CONSOLE,
+ struct omap_sti_console_config);
+ if (sti != NULL && sti->enable)
+ sti_console_enabled = 1;
+ }
+
+ /*
+ * We copy the assembler sleep/wakeup routines to SRAM.
+ * These routines need to be in SRAM as that's the only
+ * memory the MPU can see when it wakes up.
+ */
+ if (cpu_is_omap24xx()) {
+ omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
+ omap24xx_idle_loop_suspend_sz);
+
+ omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
+ omap24xx_cpu_suspend_sz);
+ }
+
+ suspend_set_ops(&omap_pm_ops);
+ pm_idle = omap2_pm_idle;
+
+ return 0;
+}
+
+late_initcall(omap2_pm_init);
--- /dev/null
+/*
+ * OMAP3 Power Management Routines
+ *
+ * Copyright (C) 2006-2008 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Jouni Hogander
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pm.h>
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+
+#include <mach/sram.h>
+#include <mach/clockdomain.h>
+#include <mach/powerdomain.h>
+#include <mach/control.h>
+
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+
+#include "prm.h"
+#include "pm.h"
+
+struct power_state {
+ struct powerdomain *pwrdm;
+ u32 next_state;
+ u32 saved_state;
+ struct list_head node;
+};
+
+static LIST_HEAD(pwrst_list);
+
+static void (*_omap_sram_idle)(u32 *addr, int save_state);
+
+static struct powerdomain *mpu_pwrdm;
+
+/* PRCM Interrupt Handler for wakeups */
+static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+{
+ u32 wkst, irqstatus_mpu;
+ u32 fclk, iclk;
+
+ /* WKUP */
+ wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
+ if (wkst) {
+ iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
+ fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
+ cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN);
+ cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN);
+ prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST);
+ while (prm_read_mod_reg(WKUP_MOD, PM_WKST))
+ cpu_relax();
+ cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN);
+ cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN);
+ }
+
+ /* CORE */
+ wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
+ if (wkst) {
+ iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
+ fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1);
+ prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1);
+ while (prm_read_mod_reg(CORE_MOD, PM_WKST1))
+ cpu_relax();
+ cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1);
+ cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1);
+ }
+ wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
+ if (wkst) {
+ iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
+ fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+ prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3);
+ while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3))
+ cpu_relax();
+ cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3);
+ cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+ }
+
+ /* PER */
+ wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
+ if (wkst) {
+ iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
+ fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN);
+ prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST);
+ while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST))
+ cpu_relax();
+ cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN);
+ cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN);
+ }
+
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ /* USBHOST */
+ wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
+ if (wkst) {
+ iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ CM_ICLKEN);
+ fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+ CM_ICLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD,
+ PM_WKST);
+ while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ PM_WKST))
+ cpu_relax();
+ cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD,
+ CM_ICLKEN);
+ cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ }
+ }
+
+ irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET))
+ cpu_relax();
+
+ return IRQ_HANDLED;
+}
+
+static void omap_sram_idle(void)
+{
+ /* Variable to tell what needs to be saved and restored
+ * in omap_sram_idle*/
+ /* save_state = 0 => Nothing to save and restored */
+ /* save_state = 1 => Only L1 and logic lost */
+ /* save_state = 2 => Only L2 lost */
+ /* save_state = 3 => L1, L2 and logic lost */
+ int save_state = 0, mpu_next_state;
+
+ if (!_omap_sram_idle)
+ return;
+
+ mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
+ switch (mpu_next_state) {
+ case PWRDM_POWER_RET:
+ /* No need to save context */
+ save_state = 0;
+ break;
+ default:
+ /* Invalid state */
+ printk(KERN_ERR "Invalid mpu state in sram_idle\n");
+ return;
+ }
+ omap2_gpio_prepare_for_retention();
+
+ _omap_sram_idle(NULL, save_state);
+ cpu_init();
+
+ omap2_gpio_resume_after_retention();
+}
+
+/*
+ * Check if functional clocks are enabled before entering
+ * sleep. This function could be behind CONFIG_PM_DEBUG
+ * when all drivers are configuring their sysconfig registers
+ * properly and using their clocks properly.
+ */
+static int omap3_fclks_active(void)
+{
+ u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0,
+ fck_cam = 0, fck_per = 0, fck_usbhost = 0;
+
+ fck_core1 = cm_read_mod_reg(CORE_MOD,
+ CM_FCLKEN1);
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ fck_core3 = cm_read_mod_reg(CORE_MOD,
+ OMAP3430ES2_CM_FCLKEN3);
+ fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
+ CM_FCLKEN);
+ fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ } else
+ fck_sgx = cm_read_mod_reg(GFX_MOD,
+ OMAP3430ES2_CM_FCLKEN3);
+ fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD,
+ CM_FCLKEN);
+ fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD,
+ CM_FCLKEN);
+ fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
+ CM_FCLKEN);
+ if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
+ fck_cam | fck_per | fck_usbhost)
+ return 1;
+ return 0;
+}
+
+static int omap3_can_sleep(void)
+{
+ if (omap3_fclks_active())
+ return 0;
+ return 1;
+}
+
+/* This sets pwrdm state (other than mpu & core. Currently only ON &
+ * RET are supported. Function is assuming that clkdm doesn't have
+ * hw_sup mode enabled. */
+static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+{
+ u32 cur_state;
+ int sleep_switch = 0;
+ int ret = 0;
+
+ if (pwrdm == NULL || IS_ERR(pwrdm))
+ return -EINVAL;
+
+ while (!(pwrdm->pwrsts & (1 << state))) {
+ if (state == PWRDM_POWER_OFF)
+ return ret;
+ state--;
+ }
+
+ cur_state = pwrdm_read_next_pwrst(pwrdm);
+ if (cur_state == state)
+ return ret;
+
+ if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
+ omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
+ sleep_switch = 1;
+ pwrdm_wait_transition(pwrdm);
+ }
+
+ ret = pwrdm_set_next_pwrst(pwrdm, state);
+ if (ret) {
+ printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
+ pwrdm->name);
+ goto err;
+ }
+
+ if (sleep_switch) {
+ omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+ pwrdm_wait_transition(pwrdm);
+ }
+
+err:
+ return ret;
+}
+
+static void omap3_pm_idle(void)
+{
+ local_irq_disable();
+ local_fiq_disable();
+
+ if (!omap3_can_sleep())
+ goto out;
+
+ if (omap_irq_pending())
+ goto out;
+
+ omap_sram_idle();
+
+out:
+ local_fiq_enable();
+ local_irq_enable();
+}
+
+static int omap3_pm_prepare(void)
+{
+ disable_hlt();
+ return 0;
+}
+
+static int omap3_pm_suspend(void)
+{
+ struct power_state *pwrst;
+ int state, ret = 0;
+
+ /* Read current next_pwrsts */
+ list_for_each_entry(pwrst, &pwrst_list, node)
+ pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
+ /* Set ones wanted by suspend */
+ list_for_each_entry(pwrst, &pwrst_list, node) {
+ if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
+ goto restore;
+ if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm))
+ goto restore;
+ }
+
+ omap_sram_idle();
+
+restore:
+ /* Restore next_pwrsts */
+ list_for_each_entry(pwrst, &pwrst_list, node) {
+ set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
+ state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
+ if (state > pwrst->next_state) {
+ printk(KERN_INFO "Powerdomain (%s) didn't enter "
+ "target state %d\n",
+ pwrst->pwrdm->name, pwrst->next_state);
+ ret = -1;
+ }
+ }
+ if (ret)
+ printk(KERN_ERR "Could not enter target state in pm_suspend\n");
+ else
+ printk(KERN_INFO "Successfully put all powerdomains "
+ "to target state\n");
+
+ return ret;
+}
+
+static int omap3_pm_enter(suspend_state_t state)
+{
+ int ret = 0;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ ret = omap3_pm_suspend();
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void omap3_pm_finish(void)
+{
+ enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+ .prepare = omap3_pm_prepare,
+ .enter = omap3_pm_enter,
+ .finish = omap3_pm_finish,
+ .valid = suspend_valid_only_mem,
+};
+
+static void __init prcm_setup_regs(void)
+{
+ /* reset modem */
+ prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON |
+ OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST,
+ CORE_MOD, RM_RSTCTRL);
+ prm_write_mod_reg(0, CORE_MOD, RM_RSTCTRL);
+
+ /* XXX Reset all wkdeps. This should be done when initializing
+ * powerdomains */
+ prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+ } else
+ prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+
+ /*
+ * Enable interface clock autoidle for all modules.
+ * Note that in the long run this should be done by clockfw
+ */
+ cm_write_mod_reg(
+ OMAP3430ES2_AUTO_MMC3 |
+ OMAP3430ES2_AUTO_ICR |
+ OMAP3430_AUTO_AES2 |
+ OMAP3430_AUTO_SHA12 |
+ OMAP3430_AUTO_DES2 |
+ OMAP3430_AUTO_MMC2 |
+ OMAP3430_AUTO_MMC1 |
+ OMAP3430_AUTO_MSPRO |
+ OMAP3430_AUTO_HDQ |
+ OMAP3430_AUTO_MCSPI4 |
+ OMAP3430_AUTO_MCSPI3 |
+ OMAP3430_AUTO_MCSPI2 |
+ OMAP3430_AUTO_MCSPI1 |
+ OMAP3430_AUTO_I2C3 |
+ OMAP3430_AUTO_I2C2 |
+ OMAP3430_AUTO_I2C1 |
+ OMAP3430_AUTO_UART2 |
+ OMAP3430_AUTO_UART1 |
+ OMAP3430_AUTO_GPT11 |
+ OMAP3430_AUTO_GPT10 |
+ OMAP3430_AUTO_MCBSP5 |
+ OMAP3430_AUTO_MCBSP1 |
+ OMAP3430ES1_AUTO_FAC | /* This is es1 only */
+ OMAP3430_AUTO_MAILBOXES |
+ OMAP3430_AUTO_OMAPCTRL |
+ OMAP3430ES1_AUTO_FSHOSTUSB |
+ OMAP3430_AUTO_HSOTGUSB |
+ OMAP3430ES1_AUTO_D2D | /* This is es1 only */
+ OMAP3430_AUTO_SSI,
+ CORE_MOD, CM_AUTOIDLE1);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_PKA |
+ OMAP3430_AUTO_AES1 |
+ OMAP3430_AUTO_RNG |
+ OMAP3430_AUTO_SHA11 |
+ OMAP3430_AUTO_DES1,
+ CORE_MOD, CM_AUTOIDLE2);
+
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ cm_write_mod_reg(
+ OMAP3430ES2_AUTO_USBTLL,
+ CORE_MOD, CM_AUTOIDLE3);
+ }
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_WDT2 |
+ OMAP3430_AUTO_WDT1 |
+ OMAP3430_AUTO_GPIO1 |
+ OMAP3430_AUTO_32KSYNC |
+ OMAP3430_AUTO_GPT12 |
+ OMAP3430_AUTO_GPT1 ,
+ WKUP_MOD, CM_AUTOIDLE);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_DSS,
+ OMAP3430_DSS_MOD,
+ CM_AUTOIDLE);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_CAM,
+ OMAP3430_CAM_MOD,
+ CM_AUTOIDLE);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_GPIO6 |
+ OMAP3430_AUTO_GPIO5 |
+ OMAP3430_AUTO_GPIO4 |
+ OMAP3430_AUTO_GPIO3 |
+ OMAP3430_AUTO_GPIO2 |
+ OMAP3430_AUTO_WDT3 |
+ OMAP3430_AUTO_UART3 |
+ OMAP3430_AUTO_GPT9 |
+ OMAP3430_AUTO_GPT8 |
+ OMAP3430_AUTO_GPT7 |
+ OMAP3430_AUTO_GPT6 |
+ OMAP3430_AUTO_GPT5 |
+ OMAP3430_AUTO_GPT4 |
+ OMAP3430_AUTO_GPT3 |
+ OMAP3430_AUTO_GPT2 |
+ OMAP3430_AUTO_MCBSP4 |
+ OMAP3430_AUTO_MCBSP3 |
+ OMAP3430_AUTO_MCBSP2,
+ OMAP3430_PER_MOD,
+ CM_AUTOIDLE);
+
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ cm_write_mod_reg(
+ OMAP3430ES2_AUTO_USBHOST,
+ OMAP3430ES2_USBHOST_MOD,
+ CM_AUTOIDLE);
+ }
+
+ /*
+ * Set all plls to autoidle. This is needed until autoidle is
+ * enabled by clockfw
+ */
+ cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
+ OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
+ cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT,
+ MPU_MOD,
+ CM_AUTOIDLE2);
+ cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) |
+ (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT),
+ PLL_MOD,
+ CM_AUTOIDLE);
+ cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT,
+ PLL_MOD,
+ CM_AUTOIDLE2);
+
+ /*
+ * Enable control of expternal oscillator through
+ * sys_clkreq. In the long run clock framework should
+ * take care of this.
+ */
+ prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
+ 1 << OMAP_AUTOEXTCLKMODE_SHIFT,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+ /* setup wakup source */
+ prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 |
+ OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12,
+ WKUP_MOD, PM_WKEN);
+ /* No need to write EN_IO, that is always enabled */
+ prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 |
+ OMAP3430_EN_GPT12,
+ WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
+ /* For some reason IO doesn't generate wakeup event even if
+ * it is selected to mpu wakeup goup */
+ prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
+ OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+}
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm)
+{
+ struct power_state *pwrst;
+
+ if (!pwrdm->pwrsts)
+ return 0;
+
+ pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL);
+ if (!pwrst)
+ return -ENOMEM;
+ pwrst->pwrdm = pwrdm;
+ pwrst->next_state = PWRDM_POWER_RET;
+ list_add(&pwrst->node, &pwrst_list);
+
+ if (pwrdm_has_hdwr_sar(pwrdm))
+ pwrdm_enable_hdwr_sar(pwrdm);
+
+ return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+}
+
+/*
+ * Enable hw supervised mode for all clockdomains if it's
+ * supported. Initiate sleep transition for other clockdomains, if
+ * they are not used
+ */
+static int __init clkdms_setup(struct clockdomain *clkdm)
+{
+ if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
+ omap2_clkdm_allow_idle(clkdm);
+ else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
+ atomic_read(&clkdm->usecount) == 0)
+ omap2_clkdm_sleep(clkdm);
+ return 0;
+}
+
+int __init omap3_pm_init(void)
+{
+ struct power_state *pwrst, *tmp;
+ int ret;
+
+ if (!cpu_is_omap34xx())
+ return -ENODEV;
+
+ printk(KERN_ERR "Power Management for TI OMAP3.\n");
+
+ /* XXX prcm_setup_regs needs to be before enabling hw
+ * supervised mode for powerdomains */
+ prcm_setup_regs();
+
+ ret = request_irq(INT_34XX_PRCM_MPU_IRQ,
+ (irq_handler_t)prcm_interrupt_handler,
+ IRQF_DISABLED, "prcm", NULL);
+ if (ret) {
+ printk(KERN_ERR "request_irq failed to register for 0x%x\n",
+ INT_34XX_PRCM_MPU_IRQ);
+ goto err1;
+ }
+
+ ret = pwrdm_for_each(pwrdms_setup);
+ if (ret) {
+ printk(KERN_ERR "Failed to setup powerdomains\n");
+ goto err2;
+ }
+
+ (void) clkdm_for_each(clkdms_setup);
+
+ mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+ if (mpu_pwrdm == NULL) {
+ printk(KERN_ERR "Failed to get mpu_pwrdm\n");
+ goto err2;
+ }
+
+ _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
+ omap34xx_cpu_suspend_sz);
+
+ suspend_set_ops(&omap_pm_ops);
+
+ pm_idle = omap3_pm_idle;
+
+err1:
+ return ret;
+err2:
+ free_irq(INT_34XX_PRCM_MPU_IRQ, NULL);
+ list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) {
+ list_del(&pwrst->node);
+ kfree(pwrst);
+ }
+ return ret;
+}
+
+late_initcall(omap3_pm_init);
/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
#define OMAP3430_EN_GPIO1 (1 << 3)
#define OMAP3430_EN_GPIO1_SHIFT 3
+#define OMAP3430_EN_GPT12 (1 << 1)
+#define OMAP3430_EN_GPT12_SHIFT 1
#define OMAP3430_EN_GPT1 (1 << 0)
#define OMAP3430_EN_GPT1_SHIFT 0
{
struct omap_sdrc_params *sp;
+ if (!sdrc_init_params)
+ return NULL;
+
sp = sdrc_init_params;
- while (sp->rate != r)
+ while (sp->rate && sp->rate != r)
sp++;
if (!sp->rate)
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
-#include <mach/pm.h>
#include <mach/omap24xx.h>
--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/sleep.S
+ *
+ * (C) Copyright 2007
+ * Texas Instruments
+ * Karthik Dasu <karthik-dp@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/io.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "sdrc.h"
+
+#define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \
+ OMAP3430_PM_PREPWSTST)
+#define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \
+ OMAP3430_PM_PREPWSTST)
+#define PM_PWSTCTRL_MPU_P OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL)
+#define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is
+ * available */
+#define SCRATCHPAD_BASE_P OMAP343X_CTRL_REGADDR(\
+ OMAP343X_CONTROL_MEM_WKUP +\
+ SCRATCHPAD_MEM_OFFS)
+#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+
+ .text
+/* Function call to get the restore pointer for resume from OFF */
+ENTRY(get_restore_pointer)
+ stmfd sp!, {lr} @ save registers on stack
+ adr r0, restore
+ ldmfd sp!, {pc} @ restore regs and return
+ENTRY(get_restore_pointer_sz)
+ .word . - get_restore_pointer_sz
+/*
+ * Forces OMAP into idle state
+ *
+ * omap34xx_suspend() - This bit of code just executes the WFI
+ * for normal idles.
+ *
+ * Note: This code get's copied to internal SRAM at boot. When the OMAP
+ * wakes up it continues execution at the point it went to sleep.
+ */
+ENTRY(omap34xx_cpu_suspend)
+ stmfd sp!, {r0-r12, lr} @ save registers on stack
+loop:
+ /*b loop*/ @Enable to debug by stepping through code
+ /* r0 contains restore pointer in sdram */
+ /* r1 contains information about saving context */
+ ldr r4, sdrc_power @ read the SDRC_POWER register
+ ldr r5, [r4] @ read the contents of SDRC_POWER
+ orr r5, r5, #0x40 @ enable self refresh on idle req
+ str r5, [r4] @ write back to SDRC_POWER register
+
+ cmp r1, #0x0
+ /* If context save is required, do that and execute wfi */
+ bne save_context_wfi
+ /* Data memory barrier and Data sync barrier */
+ mov r1, #0
+ mcr p15, 0, r1, c7, c10, 4
+ mcr p15, 0, r1, c7, c10, 5
+
+ wfi @ wait for interrupt
+
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ bl i_dll_wait
+
+ ldmfd sp!, {r0-r12, pc} @ restore regs and return
+restore:
+ /* b restore*/ @ Enable to debug restore code
+ /* Check what was the reason for mpu reset and store the reason in r9*/
+ /* 1 - Only L1 and logic lost */
+ /* 2 - Only L2 lost - In this case, we wont be here */
+ /* 3 - Both L1 and L2 lost */
+ ldr r1, pm_pwstctrl_mpu
+ ldr r2, [r1]
+ and r2, r2, #0x3
+ cmp r2, #0x0 @ Check if target power state was OFF or RET
+ moveq r9, #0x3 @ MPU OFF => L1 and L2 lost
+ movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation
+ bne logic_l1_restore
+ /* Execute smi to invalidate L2 cache */
+ mov r12, #0x1 @ set up to invalide L2
+smi: .word 0xE1600070 @ Call SMI monitor (smieq)
+logic_l1_restore:
+ mov r1, #0
+ /* Invalidate all instruction caches to PoU
+ * and flush branch target cache */
+ mcr p15, 0, r1, c7, c5, 0
+
+ ldr r4, scratchpad_base
+ ldr r3, [r4,#0xBC]
+ ldmia r3!, {r4-r6}
+ mov sp, r4
+ msr spsr_cxsf, r5
+ mov lr, r6
+
+ ldmia r3!, {r4-r9}
+ /* Coprocessor access Control Register */
+ mcr p15, 0, r4, c1, c0, 2
+
+ /* TTBR0 */
+ MCR p15, 0, r5, c2, c0, 0
+ /* TTBR1 */
+ MCR p15, 0, r6, c2, c0, 1
+ /* Translation table base control register */
+ MCR p15, 0, r7, c2, c0, 2
+ /*domain access Control Register */
+ MCR p15, 0, r8, c3, c0, 0
+ /* data fault status Register */
+ MCR p15, 0, r9, c5, c0, 0
+
+ ldmia r3!,{r4-r8}
+ /* instruction fault status Register */
+ MCR p15, 0, r4, c5, c0, 1
+ /*Data Auxiliary Fault Status Register */
+ MCR p15, 0, r5, c5, c1, 0
+ /*Instruction Auxiliary Fault Status Register*/
+ MCR p15, 0, r6, c5, c1, 1
+ /*Data Fault Address Register */
+ MCR p15, 0, r7, c6, c0, 0
+ /*Instruction Fault Address Register*/
+ MCR p15, 0, r8, c6, c0, 2
+ ldmia r3!,{r4-r7}
+
+ /* user r/w thread and process ID */
+ MCR p15, 0, r4, c13, c0, 2
+ /* user ro thread and process ID */
+ MCR p15, 0, r5, c13, c0, 3
+ /*Privileged only thread and process ID */
+ MCR p15, 0, r6, c13, c0, 4
+ /* cache size selection */
+ MCR p15, 2, r7, c0, c0, 0
+ ldmia r3!,{r4-r8}
+ /* Data TLB lockdown registers */
+ MCR p15, 0, r4, c10, c0, 0
+ /* Instruction TLB lockdown registers */
+ MCR p15, 0, r5, c10, c0, 1
+ /* Secure or Nonsecure Vector Base Address */
+ MCR p15, 0, r6, c12, c0, 0
+ /* FCSE PID */
+ MCR p15, 0, r7, c13, c0, 0
+ /* Context PID */
+ MCR p15, 0, r8, c13, c0, 1
+
+ ldmia r3!,{r4-r5}
+ /* primary memory remap register */
+ MCR p15, 0, r4, c10, c2, 0
+ /*normal memory remap register */
+ MCR p15, 0, r5, c10, c2, 1
+
+ /* Restore cpsr */
+ ldmia r3!,{r4} /*load CPSR from SDRAM*/
+ msr cpsr, r4 /*store cpsr */
+
+ /* Enabling MMU here */
+ mrc p15, 0, r7, c2, c0, 2 /* Read TTBRControl */
+ /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/
+ and r7, #0x7
+ cmp r7, #0x0
+ beq usettbr0
+ttbr_error:
+ /* More work needs to be done to support N[0:2] value other than 0
+ * So looping here so that the error can be detected
+ */
+ b ttbr_error
+usettbr0:
+ mrc p15, 0, r2, c2, c0, 0
+ ldr r5, ttbrbit_mask
+ and r2, r5
+ mov r4, pc
+ ldr r5, table_index_mask
+ and r4, r5 /* r4 = 31 to 20 bits of pc */
+ /* Extract the value to be written to table entry */
+ ldr r1, table_entry
+ add r1, r1, r4 /* r1 has value to be written to table entry*/
+ /* Getting the address of table entry to modify */
+ lsr r4, #18
+ add r2, r4 /* r2 has the location which needs to be modified */
+ /* Storing previous entry of location being modified */
+ ldr r5, scratchpad_base
+ ldr r4, [r2]
+ str r4, [r5, #0xC0]
+ /* Modify the table entry */
+ str r1, [r2]
+ /* Storing address of entry being modified
+ * - will be restored after enabling MMU */
+ ldr r5, scratchpad_base
+ str r2, [r5, #0xC4]
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer
+ mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array
+ mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB
+ mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB
+ /* Restore control register but dont enable caches here*/
+ /* Caches will be enabled after restoring MMU table entry */
+ ldmia r3!, {r4}
+ /* Store previous value of control register in scratchpad */
+ str r4, [r5, #0xC8]
+ ldr r2, cache_pred_disable_mask
+ and r4, r2
+ mcr p15, 0, r4, c1, c0, 0
+
+ ldmfd sp!, {r0-r12, pc} @ restore regs and return
+save_context_wfi:
+ /*b save_context_wfi*/ @ enable to debug save code
+ mov r8, r0 /* Store SDRAM address in r8 */
+ /* Check what that target sleep state is:stored in r1*/
+ /* 1 - Only L1 and logic lost */
+ /* 2 - Only L2 lost */
+ /* 3 - Both L1 and L2 lost */
+ cmp r1, #0x2 /* Only L2 lost */
+ beq clean_l2
+ cmp r1, #0x1 /* L2 retained */
+ /* r9 stores whether to clean L2 or not*/
+ moveq r9, #0x0 /* Dont Clean L2 */
+ movne r9, #0x1 /* Clean L2 */
+l1_logic_lost:
+ /* Store sp and spsr to SDRAM */
+ mov r4, sp
+ mrs r5, spsr
+ mov r6, lr
+ stmia r8!, {r4-r6}
+ /* Save all ARM registers */
+ /* Coprocessor access control register */
+ mrc p15, 0, r6, c1, c0, 2
+ stmia r8!, {r6}
+ /* TTBR0, TTBR1 and Translation table base control */
+ mrc p15, 0, r4, c2, c0, 0
+ mrc p15, 0, r5, c2, c0, 1
+ mrc p15, 0, r6, c2, c0, 2
+ stmia r8!, {r4-r6}
+ /* Domain access control register, data fault status register,
+ and instruction fault status register */
+ mrc p15, 0, r4, c3, c0, 0
+ mrc p15, 0, r5, c5, c0, 0
+ mrc p15, 0, r6, c5, c0, 1
+ stmia r8!, {r4-r6}
+ /* Data aux fault status register, instruction aux fault status,
+ datat fault address register and instruction fault address register*/
+ mrc p15, 0, r4, c5, c1, 0
+ mrc p15, 0, r5, c5, c1, 1
+ mrc p15, 0, r6, c6, c0, 0
+ mrc p15, 0, r7, c6, c0, 2
+ stmia r8!, {r4-r7}
+ /* user r/w thread and process ID, user r/o thread and process ID,
+ priv only thread and process ID, cache size selection */
+ mrc p15, 0, r4, c13, c0, 2
+ mrc p15, 0, r5, c13, c0, 3
+ mrc p15, 0, r6, c13, c0, 4
+ mrc p15, 2, r7, c0, c0, 0
+ stmia r8!, {r4-r7}
+ /* Data TLB lockdown, instruction TLB lockdown registers */
+ mrc p15, 0, r5, c10, c0, 0
+ mrc p15, 0, r6, c10, c0, 1
+ stmia r8!, {r5-r6}
+ /* Secure or non secure vector base address, FCSE PID, Context PID*/
+ mrc p15, 0, r4, c12, c0, 0
+ mrc p15, 0, r5, c13, c0, 0
+ mrc p15, 0, r6, c13, c0, 1
+ stmia r8!, {r4-r6}
+ /* Primary remap, normal remap registers */
+ mrc p15, 0, r4, c10, c2, 0
+ mrc p15, 0, r5, c10, c2, 1
+ stmia r8!,{r4-r5}
+
+ /* Store current cpsr*/
+ mrs r2, cpsr
+ stmia r8!, {r2}
+
+ mrc p15, 0, r4, c1, c0, 0
+ /* save control register */
+ stmia r8!, {r4}
+clean_caches:
+ /* Clean Data or unified cache to POU*/
+ /* How to invalidate only L1 cache???? - #FIX_ME# */
+ /* mcr p15, 0, r11, c7, c11, 1 */
+ cmp r9, #1 /* Check whether L2 inval is required or not*/
+ bne skip_l2_inval
+clean_l2:
+ /* read clidr */
+ mrc p15, 1, r0, c0, c0, 1
+ /* extract loc from clidr */
+ ands r3, r0, #0x7000000
+ /* left align loc bit field */
+ mov r3, r3, lsr #23
+ /* if loc is 0, then no need to clean */
+ beq finished
+ /* start clean at cache level 0 */
+ mov r10, #0
+loop1:
+ /* work out 3x current cache level */
+ add r2, r10, r10, lsr #1
+ /* extract cache type bits from clidr*/
+ mov r1, r0, lsr r2
+ /* mask of the bits for current cache only */
+ and r1, r1, #7
+ /* see what cache we have at this level */
+ cmp r1, #2
+ /* skip if no cache, or just i-cache */
+ blt skip
+ /* select current cache level in cssr */
+ mcr p15, 2, r10, c0, c0, 0
+ /* isb to sych the new cssr&csidr */
+ isb
+ /* read the new csidr */
+ mrc p15, 1, r1, c0, c0, 0
+ /* extract the length of the cache lines */
+ and r2, r1, #7
+ /* add 4 (line length offset) */
+ add r2, r2, #4
+ ldr r4, assoc_mask
+ /* find maximum number on the way size */
+ ands r4, r4, r1, lsr #3
+ /* find bit position of way size increment */
+ clz r5, r4
+ ldr r7, numset_mask
+ /* extract max number of the index size*/
+ ands r7, r7, r1, lsr #13
+loop2:
+ mov r9, r4
+ /* create working copy of max way size*/
+loop3:
+ /* factor way and cache number into r11 */
+ orr r11, r10, r9, lsl r5
+ /* factor index number into r11 */
+ orr r11, r11, r7, lsl r2
+ /*clean & invalidate by set/way */
+ mcr p15, 0, r11, c7, c10, 2
+ /* decrement the way*/
+ subs r9, r9, #1
+ bge loop3
+ /*decrement the index */
+ subs r7, r7, #1
+ bge loop2
+skip:
+ add r10, r10, #2
+ /* increment cache number */
+ cmp r3, r10
+ bgt loop1
+finished:
+ /*swith back to cache level 0 */
+ mov r10, #0
+ /* select current cache level in cssr */
+ mcr p15, 2, r10, c0, c0, 0
+ isb
+skip_l2_inval:
+ /* Data memory barrier and Data sync barrier */
+ mov r1, #0
+ mcr p15, 0, r1, c7, c10, 4
+ mcr p15, 0, r1, c7, c10, 5
+
+ wfi @ wait for interrupt
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ bl i_dll_wait
+ /* restore regs and return */
+ ldmfd sp!, {r0-r12, pc}
+
+i_dll_wait:
+ ldr r4, clk_stabilize_delay
+
+i_dll_delay:
+ subs r4, r4, #0x1
+ bne i_dll_delay
+ ldr r4, sdrc_power
+ ldr r5, [r4]
+ bic r5, r5, #0x40
+ str r5, [r4]
+ bx lr
+pm_prepwstst_core:
+ .word PM_PREPWSTST_CORE_V
+pm_prepwstst_mpu:
+ .word PM_PREPWSTST_MPU_V
+pm_pwstctrl_mpu:
+ .word PM_PWSTCTRL_MPU_P
+scratchpad_base:
+ .word SCRATCHPAD_BASE_P
+sdrc_power:
+ .word SDRC_POWER_V
+context_mem:
+ .word 0x803E3E14
+clk_stabilize_delay:
+ .word 0x000001FF
+assoc_mask:
+ .word 0x3ff
+numset_mask:
+ .word 0x7fff
+ttbrbit_mask:
+ .word 0xFFFFC000
+table_index_mask:
+ .word 0xFFF00000
+table_entry:
+ .word 0x00000C02
+cache_pred_disable_mask:
+ .word 0xFFFFE7FB
+ENTRY(omap34xx_cpu_suspend_sz)
+ .word . - omap34xx_cpu_suspend
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/pm.h>
#include <mach/mux.h>
#include <mach/usb.h>
config OMAP_SERIAL_WAKE
bool "Enable wake-up events for serial ports"
- depends on OMAP_MUX
+ depends on ARCH_OMAP1 && OMAP_MUX
default y
help
Select this option if you want to have your system wake up
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <linux/pm.h>
#include <linux/console.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <mach/gpmc.h>
#include <mach/onenand.h>
#include <mach/gpio.h>
-#include <mach/pm.h>
#include <mach/dma.h>
git.openpandora.org / pandora-kernel.git / commitdiff