config ARCH_S3C64XX
bool "Samsung S3C64XX"
- select PLAT_S3C
+ select PLAT_SAMSUNG
select CPU_V6
select GENERIC_GPIO
select ARM_VIC
cause the debug messages to appear on the first serial port.
config DEBUG_S3C_UART
- depends on PLAT_S3C
+ depends on PLAT_SAMSUNG
int "S3C UART to use for low-level debug"
default "0"
help
--- /dev/null
+/* arch/arm/mach-s5pc100/include/mach/io.h
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S5PC100 systems
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
--- /dev/null
+/* arch/arm/mach-s5pc100/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
--- /dev/null
+/* arch/arm/mach-s5pc100/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C6400 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
select NO_IOPORT
help
Base platform code for any Samsung S3C device
-
-# low-level serial option nodes
-
-if PLAT_S3C
-
-config CPU_LLSERIAL_S3C2410_ONLY
- bool
- default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
-
-config CPU_LLSERIAL_S3C2440_ONLY
- bool
- default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
-
-config CPU_LLSERIAL_S3C2410
- bool
- help
- Selected if there is an S3C2410 (or register compatible) serial
- low-level implementation needed
-
-config CPU_LLSERIAL_S3C2440
- bool
- help
- Selected if there is an S3C2440 (or register compatible) serial
- low-level implementation needed
-
-# boot configurations
-
-comment "Boot options"
-
-config S3C_BOOT_WATCHDOG
- bool "S3C Initialisation watchdog"
- depends on S3C2410_WATCHDOG
- help
- Say y to enable the watchdog during the kernel decompression
- stage. If the kernel fails to uncompress, then the watchdog
- will trigger a reset and the system should restart.
-
-config S3C_BOOT_ERROR_RESET
- bool "S3C Reboot on decompression error"
- help
- Say y here to use the watchdog to reset the system if the
- kernel decompressor detects an error during decompression.
-
-config S3C_BOOT_UART_FORCE_FIFO
- bool "Force UART FIFO on during boot process"
- default y
- help
- Say Y here to force the UART FIFOs on during the kernel
- uncompressor
-
-
-config S3C_LOWLEVEL_UART_PORT
- int "S3C UART to use for low-level messages"
- default 0
- help
- Choice of which UART port to use for the low-level messages,
- such as the `Uncompressing...` at start time. The value of
- this configuration should be between zero and two. The port
- must have been initialised by the boot-loader before use.
-
-# options for gpiolib support
-
-config S3C_GPIO_SPACE
- int "Space between gpio banks"
- default 0
- help
- Add a number of spare GPIO entries between each bank for debugging
- purposes. This allows any problems where an counter overflows from
- one bank to another to be caught, at the expense of using a little
- more memory.
-
-config S3C_GPIO_TRACK
- bool
- help
- Internal configuration option to enable the s3c specific gpio
- chip tracking if the platform requires it.
-
-# DMA
-
-config S3C_DMA
- bool
- help
- Internal configuration for S3C DMA core
-
-endif
if PLAT_S3C24XX
+# low-level serial option nodes
+
+config CPU_LLSERIAL_S3C2410_ONLY
+ bool
+ default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
+
+config CPU_LLSERIAL_S3C2440_ONLY
+ bool
+ default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
+
+config CPU_LLSERIAL_S3C2410
+ bool
+ help
+ Selected if there is an S3C2410 (or register compatible) serial
+ low-level implementation needed
+
+config CPU_LLSERIAL_S3C2440
+ bool
+ help
+ Selected if there is an S3C2440 (or register compatible) serial
+ low-level implementation needed
+
# code that is shared between a number of the s3c24xx implementations
config S3C2410_CLOCK
bool
depends on ARCH_S5P6440
default y
- select PLAT_S3C
select ARM_VIC
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
if PLAT_SAMSUNG
+# boot configurations
+
+comment "Boot options"
+
+config S3C_BOOT_WATCHDOG
+ bool "S3C Initialisation watchdog"
+ depends on S3C2410_WATCHDOG
+ help
+ Say y to enable the watchdog during the kernel decompression
+ stage. If the kernel fails to uncompress, then the watchdog
+ will trigger a reset and the system should restart.
+
+config S3C_BOOT_ERROR_RESET
+ bool "S3C Reboot on decompression error"
+ help
+ Say y here to use the watchdog to reset the system if the
+ kernel decompressor detects an error during decompression.
+
+config S3C_BOOT_UART_FORCE_FIFO
+ bool "Force UART FIFO on during boot process"
+ default y
+ help
+ Say Y here to force the UART FIFOs on during the kernel
+ uncompressor
+
+
+config S3C_LOWLEVEL_UART_PORT
+ int "S3C UART to use for low-level messages"
+ default 0
+ help
+ Choice of which UART port to use for the low-level messages,
+ such as the `Uncompressing...` at start time. The value of
+ this configuration should be between zero and two. The port
+ must have been initialised by the boot-loader before use.
+
+# clock options
+
config SAMSUNG_CLKSRC
bool
help
provides. This allows expanding the GPIO space for use with
GPIO expanders.
+config S3C_GPIO_SPACE
+ int "Space between gpio banks"
+ default 0
+ help
+ Add a number of spare GPIO entries between each bank for debugging
+ purposes. This allows any problems where an counter overflows from
+ one bank to another to be caught, at the expense of using a little
+ more memory.
+
+config S3C_GPIO_TRACK
+ bool
+ help
+ Internal configuration option to enable the s3c specific gpio
+ chip tracking if the platform requires it.
+
# ADC driver
config S3C_ADC
Compile in platform device definitions for S3C64XX's type
SPI controllers.
+# DMA
+
+config S3C_DMA
+ bool
+ help
+ Internal configuration for S3C DMA core
+
comment "Power management"
config SAMSUNG_PM_DEBUG
git.openpandora.org / pandora-kernel.git / commitdiff