ath9k: introduce bus specific cache size routine

The PCI specific bus_read_cachesize routine won't work on the AHB bus,
we have to replace it with a suitable one later.

Changes-licensed-under: ISC

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Tested-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
index 2256ba4..8e93d11 100644 (file)
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -693,6 +693,10 @@ enum PROT_MODE {
 #define SC_OP_RFKILL_SW_BLOCKED        BIT(12)
 #define SC_OP_RFKILL_HW_BLOCKED        BIT(13)
 
+struct ath_bus_ops {
+       void            (*read_cachesize)(struct ath_softc *sc, int *csz);
+};
+
 struct ath_softc {
        struct ieee80211_hw *hw;
        struct device *dev;
@@ -743,6 +747,7 @@ struct ath_softc {
 #ifdef CONFIG_ATH9K_DEBUG
        struct ath9k_debug sc_debug;
 #endif
+       struct ath_bus_ops *bus_ops;
 };
 
 int ath_reset(struct ath_softc *sc, bool retry_tx);
@@ -750,4 +755,9 @@ int ath_get_hal_qnum(u16 queue, struct ath_softc *sc);
 int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
 int ath_cabq_update(struct ath_softc *);
 
+static inline void ath_read_cachesize(struct ath_softc *sc, int *csz)
+{
+       sc->bus_ops->read_cachesize(sc, csz);
+}
+
 #endif /* CORE_H */

diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index ebf0467..884469a 100644 (file)
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -42,7 +42,7 @@ static void ath_detach(struct ath_softc *sc);
 
 /* return bus cachesize in 4B word units */
 
-static void bus_read_cachesize(struct ath_softc *sc, int *csz)
+static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
 {
        u8 u8tmp;
 
@@ -1338,7 +1338,7 @@ static int ath_init(u16 devid, struct ath_softc *sc)
         * Cache line size is used to size and align various
         * structures used to communicate with the hardware.
         */
-       bus_read_cachesize(sc, &csz);
+       ath_read_cachesize(sc, &csz);
        /* XXX assert csz is non-zero */
        sc->sc_cachelsz = csz << 2;     /* convert to bytes */
 
@@ -2534,6 +2534,10 @@ ath_rf_name(u16 rf_version)
        return "????";
 }
 
+static struct ath_bus_ops ath_pci_bus_ops = {
+       .read_cachesize = ath_pci_read_cachesize,
+};
+
 static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
        void __iomem *mem;
@@ -2622,6 +2626,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
        sc->hw = hw;
        sc->dev = &pdev->dev;
        sc->mem = mem;
+       sc->bus_ops = &ath_pci_bus_ops;
 
        if (ath_attach(id->device, sc) != 0) {
                ret = -ENODEV;