MIPS: Octeon PCIe: Make hardware and software bus numbers match.

Some SiliconImage PCIe SATA controlers are not detected when the bus
numbers differ.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index 7526224..6aa5c54 100644 (file)
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -1040,19 +1040,29 @@ static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
        int bus_number = bus->number;
 
        /*
-        * We need to force the bus number to be zero on the root
-        * bus. Linux numbers the 2nd root bus to start after all
-        * buses on root 0.
+        * For the top level bus make sure our hardware bus number
+        * matches the software one.
         */
-       if (bus->parent == NULL)
-               bus_number = 0;
+       if (bus->parent == NULL) {
+               union cvmx_pciercx_cfg006 pciercx_cfg006;
+               pciercx_cfg006.u32 = cvmx_pcie_cfgx_read(pcie_port,
+                       CVMX_PCIERCX_CFG006(pcie_port));
+               if (pciercx_cfg006.s.pbnum != bus_number) {
+                       pciercx_cfg006.s.pbnum = bus_number;
+                       pciercx_cfg006.s.sbnum = bus_number;
+                       pciercx_cfg006.s.subbnum = bus_number;
+                       cvmx_pcie_cfgx_write(pcie_port,
+                               CVMX_PCIERCX_CFG006(pcie_port),
+                               pciercx_cfg006.u32);
+               }
+       }
 
        /*
         * PCIe only has a single device connected to Octeon. It is
         * always device ID 0. Don't bother doing reads for other
         * device IDs on the first segment.
         */
-       if ((bus_number == 0) && (devfn >> 3 != 0))
+       if ((bus->parent == NULL) && (devfn >> 3 != 0))
                return PCIBIOS_FUNC_NOT_SUPPORTED;
 
        /*
@@ -1070,7 +1080,7 @@ static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
                 * bridge only respondes to device ID 0, function
                 * 0-1
                 */
-               if ((bus_number == 0) && (devfn >= 2))
+               if ((bus->parent == NULL) && (devfn >= 2))
                        return PCIBIOS_FUNC_NOT_SUPPORTED;
                /*
                 * The PCI-X slots are device ID 2,3. Choose one of
@@ -1167,13 +1177,6 @@ static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus,
                                           int size, u32 val)
 {
        int bus_number = bus->number;
-       /*
-        * We need to force the bus number to be zero on the root
-        * bus. Linux numbers the 2nd root bus to start after all
-        * busses on root 0.
-        */
-       if (bus->parent == NULL)
-               bus_number = 0;
 
        switch (size) {
        case 4: