igb: move the generic copper link setup code into e1000_phy.c

This patch moves the generic portion of the copper link setup into a
seperate function in e1000_phy.c.  This helps to reduce the size of
copper_link_setup_82575 and make it a bit more readable.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index 45063c2..5d345e3 100644 (file)
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -907,7 +907,6 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
 {
        u32 ctrl;
        s32  ret_val;
-       bool link;
 
        ctrl = rd32(E1000_CTRL);
        ctrl |= E1000_CTRL_SLU;
@@ -940,44 +939,7 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
        if (ret_val)
                goto out;
 
-       if (hw->mac.autoneg) {
-               /*
-                * Setup autoneg and flow control advertisement
-                * and perform autonegotiation.
-                */
-               ret_val = igb_copper_link_autoneg(hw);
-               if (ret_val)
-                       goto out;
-       } else {
-               /*
-                * PHY will be set to 10H, 10F, 100H or 100F
-                * depending on user settings.
-                */
-               hw_dbg("Forcing Speed and Duplex\n");
-               ret_val = hw->phy.ops.force_speed_duplex(hw);
-               if (ret_val) {
-                       hw_dbg("Error Forcing Speed and Duplex\n");
-                       goto out;
-               }
-       }
-
-       /*
-        * Check link status. Wait up to 100 microseconds for link to become
-        * valid.
-        */
-       ret_val = igb_phy_has_link(hw, COPPER_LINK_UP_LIMIT, 10, &link);
-       if (ret_val)
-               goto out;
-
-       if (link) {
-               hw_dbg("Valid link established!!!\n");
-               /* Config the MAC and PHY after link is up */
-               igb_config_collision_dist(hw);
-               ret_val = igb_config_fc_after_link_up(hw);
-       } else {
-               hw_dbg("Unable to establish link!!!\n");
-       }
-
+       ret_val = igb_setup_copper_link(hw);
 out:
        return ret_val;
 }

diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c
index d4c928c..b27275d 100644 (file)
--- a/drivers/net/igb/e1000_phy.c
+++ b/drivers/net/igb/e1000_phy.c
@@ -669,7 +669,7 @@ out:
  *  and restart the negotiation process between the link partner.  If
  *  autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
  **/
-s32 igb_copper_link_autoneg(struct e1000_hw *hw)
+static s32 igb_copper_link_autoneg(struct e1000_hw *hw)
 {
        struct e1000_phy_info *phy = &hw->phy;
        s32 ret_val;
@@ -892,6 +892,65 @@ out:
        return ret_val;
 }
 
+/**
+ *  igb_setup_copper_link - Configure copper link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the appropriate function to configure the link for auto-neg or forced
+ *  speed and duplex.  Then we check for link, once link is established calls
+ *  to configure collision distance and flow control are called.  If link is
+ *  not established, we return -E1000_ERR_PHY (-2).
+ **/
+s32 igb_setup_copper_link(struct e1000_hw *hw)
+{
+       s32 ret_val;
+       bool link;
+
+
+       if (hw->mac.autoneg) {
+               /*
+                * Setup autoneg and flow control advertisement and perform
+                * autonegotiation.
+                */
+               ret_val = igb_copper_link_autoneg(hw);
+               if (ret_val)
+                       goto out;
+       } else {
+               /*
+                * PHY will be set to 10H, 10F, 100H or 100F
+                * depending on user settings.
+                */
+               hw_dbg("Forcing Speed and Duplex\n");
+               ret_val = hw->phy.ops.force_speed_duplex(hw);
+               if (ret_val) {
+                       hw_dbg("Error Forcing Speed and Duplex\n");
+                       goto out;
+               }
+       }
+
+       /*
+        * Check link status. Wait up to 100 microseconds for link to become
+        * valid.
+        */
+       ret_val = igb_phy_has_link(hw,
+                                  COPPER_LINK_UP_LIMIT,
+                                  10,
+                                  &link);
+       if (ret_val)
+               goto out;
+
+       if (link) {
+               hw_dbg("Valid link established!!!\n");
+               igb_config_collision_dist(hw);
+               ret_val = igb_config_fc_after_link_up(hw);
+       } else {
+               hw_dbg("Unable to establish link!!!\n");
+       }
+
+out:
+       return ret_val;
+}
+
 /**
  *  igb_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
  *  @hw: pointer to the HW structure

diff --git a/drivers/net/igb/e1000_phy.h b/drivers/net/igb/e1000_phy.h
index 4c49803..adb9436 100644 (file)
--- a/drivers/net/igb/e1000_phy.h
+++ b/drivers/net/igb/e1000_phy.h
@@ -43,7 +43,6 @@ enum e1000_smart_speed {
 
 s32  igb_check_downshift(struct e1000_hw *hw);
 s32  igb_check_reset_block(struct e1000_hw *hw);
-s32  igb_copper_link_autoneg(struct e1000_hw *hw);
 s32  igb_copper_link_setup_igp(struct e1000_hw *hw);
 s32  igb_copper_link_setup_m88(struct e1000_hw *hw);
 s32  igb_phy_force_speed_duplex_igp(struct e1000_hw *hw);
@@ -57,6 +56,7 @@ s32  igb_phy_sw_reset(struct e1000_hw *hw);
 s32  igb_phy_hw_reset(struct e1000_hw *hw);
 s32  igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
 s32  igb_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+s32  igb_setup_copper_link(struct e1000_hw *hw);
 s32  igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
 s32  igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
                                u32 usec_interval, bool *success);