* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (24 commits)
quota: Fix possible oops in __dquot_initialize()
ext3: Update kernel-doc comments
jbd/2: fixed typos
ext2: fixed typo.
ext3: Fix debug messages in ext3_group_extend()
jbd: Convert atomic_inc() to get_bh()
ext3: Remove misplaced BUFFER_TRACE() in ext3_truncate()
jbd: Fix debug message in do_get_write_access()
jbd: Check return value of __getblk()
ext3: Use DIV_ROUND_UP() on group desc block counting
ext3: Return proper error code on ext3_fill_super()
ext3: Remove unnecessary casts on bh->b_data
ext3: Cleanup ext3_setup_super()
quota: Fix issuing of warnings from dquot_transfer
quota: fix dquot_disable vs dquot_transfer race v2
jbd: Convert bitops to buffer fns
ext3/jbd: Avoid WARN() messages when failing to write the superblock
jbd: Use offset_in_page() instead of manual calculation
jbd: Remove unnecessary goto statement
jbd: Use printk_ratelimited() in journal_alloc_journal_head()
...
return here;
}
-/*
+/**
* ext2_try_to_allocate()
* @sb: superblock
- * @handle: handle to this transaction
* @group: given allocation block group
* @bitmap_bh: bufferhead holds the block bitmap
* @grp_goal: given target block within the group
if (here < 0)
here = 0;
- p = ((char *)bh->b_data) + (here >> 3);
+ p = bh->b_data + (here >> 3);
r = memscan(p, 0, ((maxblocks + 7) >> 3) - (here >> 3));
- next = (r - ((char *)bh->b_data)) << 3;
+ next = (r - bh->b_data) << 3;
if (next < maxblocks && next >= start && ext3_test_allocatable(next, bh))
return next;
/**
* claim_block()
+ * @lock: the spin lock for this block group
* @block: the free block (group relative) to allocate
- * @bh: the bufferhead containts the block group bitmap
+ * @bh: the buffer_head contains the block group bitmap
*
* We think we can allocate this block in this bitmap. Try to set the bit.
* If that succeeds then check that nobody has allocated and then freed the
* but we will shift to the place where start_block is,
* then start from there, when looking for a reservable space.
*
- * @size: the target new reservation window size
+ * @my_rsv: the reservation window
*
- * @group_first_block: the first block we consider to start
+ * @sb: the super block
+ *
+ * @start_block: the first block we consider to start
* the real search from
*
* @last_block:
*
* failed: we failed to find a reservation window in this group
*
- * @rsv: the reservation
+ * @my_rsv: the reservation window
*
* @grp_goal: The goal (group-relative). It is where the search for a
* free reservable space should start from.
* @group: given allocation block group
* @bitmap_bh: bufferhead holds the block bitmap
* @grp_goal: given target block within the group
- * @count: target number of blocks to allocate
* @my_rsv: reservation window
+ * @count: target number of blocks to allocate
* @errp: pointer to store the error code
*
* This is the main function used to allocate a new block and its reservation
ei->i_state_flags = 0;
ext3_set_inode_state(inode, EXT3_STATE_NEW);
- ei->i_extra_isize =
- (EXT3_INODE_SIZE(inode->i_sb) > EXT3_GOOD_OLD_INODE_SIZE) ?
- sizeof(struct ext3_inode) - EXT3_GOOD_OLD_INODE_SIZE : 0;
+ /* See comment in ext3_iget for explanation */
+ if (ino >= EXT3_FIRST_INO(sb) + 1 &&
+ EXT3_INODE_SIZE(sb) > EXT3_GOOD_OLD_INODE_SIZE) {
+ ei->i_extra_isize =
+ sizeof(struct ext3_inode) - EXT3_GOOD_OLD_INODE_SIZE;
+ } else {
+ ei->i_extra_isize = 0;
+ }
ret = inode;
dquot_initialize(inode);
}
/**
- * ext3_blks_to_allocate: Look up the block map and count the number
+ * ext3_blks_to_allocate - Look up the block map and count the number
* of direct blocks need to be allocated for the given branch.
*
* @branch: chain of indirect blocks
}
/**
- * ext3_alloc_blocks: multiple allocate blocks needed for a branch
+ * ext3_alloc_blocks - multiple allocate blocks needed for a branch
+ * @handle: handle for this transaction
+ * @inode: owner
+ * @goal: preferred place for allocation
* @indirect_blks: the number of blocks need to allocate for indirect
* blocks
- *
+ * @blks: number of blocks need to allocated for direct blocks
* @new_blocks: on return it will store the new block numbers for
* the indirect blocks(if needed) and the first direct block,
- * @blks: on return it will store the total number of allocated
- * direct blocks
+ * @err: here we store the error value
+ *
+ * return the number of direct blocks allocated
*/
static int ext3_alloc_blocks(handle_t *handle, struct inode *inode,
ext3_fsblk_t goal, int indirect_blks, int blks,
/**
* ext3_alloc_branch - allocate and set up a chain of blocks.
+ * @handle: handle for this transaction
* @inode: owner
* @indirect_blks: number of allocated indirect blocks
* @blks: number of allocated direct blocks
+ * @goal: preferred place for allocation
* @offsets: offsets (in the blocks) to store the pointers to next.
* @branch: place to store the chain in.
*
/**
* ext3_splice_branch - splice the allocated branch onto inode.
+ * @handle: handle for this transaction
* @inode: owner
* @block: (logical) number of block we are adding
- * @chain: chain of indirect blocks (with a missing link - see
- * ext3_alloc_branch)
* @where: location of missing link
* @num: number of indirect blocks we are adding
* @blks: number of direct blocks we are adding
*/
} else {
/* Shared branch grows from an indirect block */
- BUFFER_TRACE(partial->bh, "get_write_access");
ext3_free_branches(handle, inode, partial->bh,
partial->p,
partial->p+1, (chain+n-1) - partial);
o_blocks_count = le32_to_cpu(es->s_blocks_count);
if (test_opt(sb, DEBUG))
- printk(KERN_DEBUG "EXT3-fs: extending last group from "E3FSBLK" uto "E3FSBLK" blocks\n",
+ printk(KERN_DEBUG "EXT3-fs: extending last group from "E3FSBLK
+ " upto "E3FSBLK" blocks\n",
o_blocks_count, n_blocks_count);
if (n_blocks_count == 0 || n_blocks_count == o_blocks_count)
if (n_blocks_count > (sector_t)(~0ULL) >> (sb->s_blocksize_bits - 9)) {
printk(KERN_ERR "EXT3-fs: filesystem on %s:"
- " too large to resize to %lu blocks safely\n",
+ " too large to resize to "E3FSBLK" blocks safely\n",
sb->s_id, n_blocks_count);
if (sizeof(sector_t) < 8)
ext3_warning(sb, __func__,
es->s_blocks_count = cpu_to_le32(o_blocks_count + add);
ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh);
mutex_unlock(&EXT3_SB(sb)->s_resize_lock);
- ext3_debug("freeing blocks %lu through "E3FSBLK"\n", o_blocks_count,
- o_blocks_count + add);
+ ext3_debug("freeing blocks "E3FSBLK" through "E3FSBLK"\n",
+ o_blocks_count, o_blocks_count + add);
ext3_free_blocks_sb(handle, sb, o_blocks_count, add, &freed_blocks);
- ext3_debug("freed blocks "E3FSBLK" through "E3FSBLK"\n", o_blocks_count,
- o_blocks_count + add);
+ ext3_debug("freed blocks "E3FSBLK" through "E3FSBLK"\n",
+ o_blocks_count, o_blocks_count + add);
if ((err = ext3_journal_stop(handle)))
goto exit_put;
if (test_opt(sb, DEBUG))
ext3_msg(sb, KERN_WARNING,
"warning: mounting fs with errors, "
"running e2fsck is recommended");
- else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 &&
+ else if ((__s16) le16_to_cpu(es->s_max_mnt_count) > 0 &&
le16_to_cpu(es->s_mnt_count) >=
- (unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count))
+ le16_to_cpu(es->s_max_mnt_count))
ext3_msg(sb, KERN_WARNING,
"warning: maximal mount count reached, "
"running e2fsck is recommended");
valid forever! :) */
es->s_state &= cpu_to_le16(~EXT3_VALID_FS);
#endif
- if (!(__s16) le16_to_cpu(es->s_max_mnt_count))
+ if (!le16_to_cpu(es->s_max_mnt_count))
es->s_max_mnt_count = cpu_to_le16(EXT3_DFL_MAX_MNT_COUNT);
le16_add_cpu(&es->s_mnt_count, 1);
es->s_mtime = cpu_to_le32(get_seconds());
* Note: s_es must be initialized as soon as possible because
* some ext3 macro-instructions depend on its value
*/
- es = (struct ext3_super_block *) (((char *)bh->b_data) + offset);
+ es = (struct ext3_super_block *) (bh->b_data + offset);
sbi->s_es = es;
sb->s_magic = le16_to_cpu(es->s_magic);
if (sb->s_magic != EXT3_SUPER_MAGIC)
"error: can't read superblock on 2nd try");
goto failed_mount;
}
- es = (struct ext3_super_block *)(((char *)bh->b_data) + offset);
+ es = (struct ext3_super_block *)(bh->b_data + offset);
sbi->s_es = es;
if (es->s_magic != cpu_to_le16(EXT3_SUPER_MAGIC)) {
ext3_msg(sb, KERN_ERR,
sbi->s_groups_count = ((le32_to_cpu(es->s_blocks_count) -
le32_to_cpu(es->s_first_data_block) - 1)
/ EXT3_BLOCKS_PER_GROUP(sb)) + 1;
- db_count = (sbi->s_groups_count + EXT3_DESC_PER_BLOCK(sb) - 1) /
- EXT3_DESC_PER_BLOCK(sb);
+ db_count = DIV_ROUND_UP(sbi->s_groups_count, EXT3_DESC_PER_BLOCK(sb));
sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *),
GFP_KERNEL);
if (sbi->s_group_desc == NULL) {
ext3_msg(sb, KERN_ERR,
"error: not enough memory");
+ ret = -ENOMEM;
goto failed_mount;
}
}
if (err) {
ext3_msg(sb, KERN_ERR, "error: insufficient memory");
+ ret = err;
goto failed_mount3;
}
goto out_bdev;
}
- es = (struct ext3_super_block *) (((char *)bh->b_data) + offset);
+ es = (struct ext3_super_block *) (bh->b_data + offset);
if ((le16_to_cpu(es->s_magic) != EXT3_SUPER_MAGIC) ||
!(le32_to_cpu(es->s_feature_incompat) &
EXT3_FEATURE_INCOMPAT_JOURNAL_DEV)) {
if (!sbh)
return error;
+
+ if (buffer_write_io_error(sbh)) {
+ /*
+ * Oh, dear. A previous attempt to write the
+ * superblock failed. This could happen because the
+ * USB device was yanked out. Or it could happen to
+ * be a transient write error and maybe the block will
+ * be remapped. Nothing we can do but to retry the
+ * write and hope for the best.
+ */
+ ext3_msg(sb, KERN_ERR, "previous I/O error to "
+ "superblock detected");
+ clear_buffer_write_io_error(sbh);
+ set_buffer_uptodate(sbh);
+ }
/*
* If the file system is mounted read-only, don't update the
* superblock write time. This avoids updating the superblock
es->s_free_inodes_count = cpu_to_le32(ext3_count_free_inodes(sb));
BUFFER_TRACE(sbh, "marking dirty");
mark_buffer_dirty(sbh);
- if (sync)
+ if (sync) {
error = sync_dirty_buffer(sbh);
+ if (buffer_write_io_error(sbh)) {
+ ext3_msg(sb, KERN_ERR, "I/O error while writing "
+ "superblock");
+ clear_buffer_write_io_error(sbh);
+ set_buffer_uptodate(sbh);
+ }
+ }
return error;
}
goto restart;
}
if (buffer_locked(bh)) {
- atomic_inc(&bh->b_count);
+ get_bh(bh);
spin_unlock(&journal->j_list_lock);
jbd_unlock_bh_state(bh);
wait_on_buffer(bh);
int ret = 0;
if (buffer_locked(bh)) {
- atomic_inc(&bh->b_count);
+ get_bh(bh);
spin_unlock(&journal->j_list_lock);
jbd_unlock_bh_state(bh);
wait_on_buffer(bh);
/* Bump b_count to prevent truncate from stumbling over
the shadowed buffer! @@@ This can go if we ever get
rid of the BJ_IO/BJ_Shadow pairing of buffers. */
- atomic_inc(&jh2bh(jh)->b_count);
+ get_bh(jh2bh(jh));
/* Make a temporary IO buffer with which to write it out
(this will requeue both the metadata buffer and the
temporary IO buffer). new_bh goes on BJ_IO*/
- set_bit(BH_JWrite, &jh2bh(jh)->b_state);
+ set_buffer_jwrite(jh2bh(jh));
/*
* akpm: journal_write_metadata_buffer() sets
* new_bh->b_transaction to commit_transaction.
JBUFFER_TRACE(jh, "ph3: write metadata");
flags = journal_write_metadata_buffer(commit_transaction,
jh, &new_jh, blocknr);
- set_bit(BH_JWrite, &jh2bh(new_jh)->b_state);
+ set_buffer_jwrite(jh2bh(new_jh));
wbuf[bufs++] = jh2bh(new_jh);
/* Record the new block's tag in the current descriptor
shadowed buffer */
jh = commit_transaction->t_shadow_list->b_tprev;
bh = jh2bh(jh);
- clear_bit(BH_JWrite, &bh->b_state);
+ clear_buffer_jwrite(bh);
J_ASSERT_BH(bh, buffer_jbddirty(bh));
/* The metadata is now released for reuse, but we need
#include <linux/poison.h>
#include <linux/proc_fs.h>
#include <linux/debugfs.h>
+#include <linux/ratelimit.h>
#include <asm/uaccess.h>
#include <asm/page.h>
static int journal_convert_superblock_v1(journal_t *, journal_superblock_t *);
static void __journal_abort_soft (journal_t *journal, int errno);
+static const char *journal_dev_name(journal_t *journal, char *buffer);
/*
* Helper function used to manage commit timeouts
*/
if (!tid_geq(journal->j_commit_request, target)) {
/*
- * We want a new commit: OK, mark the request and wakup the
+ * We want a new commit: OK, mark the request and wakeup the
* commit thread. We do _not_ do the commit ourselves.
*/
if (err)
return err;
bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize);
+ if (unlikely(!bh))
+ return -ENOMEM;
lock_buffer(bh);
memset (bh->b_data, 0, journal->j_blocksize);
BUFFER_TRACE(bh, "marking dirty");
goto out;
}
+ if (buffer_write_io_error(bh)) {
+ char b[BDEVNAME_SIZE];
+ /*
+ * Oh, dear. A previous attempt to write the journal
+ * superblock failed. This could happen because the
+ * USB device was yanked out. Or it could happen to
+ * be a transient write error and maybe the block will
+ * be remapped. Nothing we can do but to retry the
+ * write and hope for the best.
+ */
+ printk(KERN_ERR "JBD: previous I/O error detected "
+ "for journal superblock update for %s.\n",
+ journal_dev_name(journal, b));
+ clear_buffer_write_io_error(bh);
+ set_buffer_uptodate(bh);
+ }
+
spin_lock(&journal->j_state_lock);
jbd_debug(1,"JBD: updating superblock (start %u, seq %d, errno %d)\n",
journal->j_tail, journal->j_tail_sequence, journal->j_errno);
BUFFER_TRACE(bh, "marking dirty");
mark_buffer_dirty(bh);
- if (wait)
+ if (wait) {
sync_dirty_buffer(bh);
- else
+ if (buffer_write_io_error(bh)) {
+ char b[BDEVNAME_SIZE];
+ printk(KERN_ERR "JBD: I/O error detected "
+ "when updating journal superblock for %s.\n",
+ journal_dev_name(journal, b));
+ clear_buffer_write_io_error(bh);
+ set_buffer_uptodate(bh);
+ }
+ } else
write_dirty_buffer(bh, WRITE);
out:
static struct journal_head *journal_alloc_journal_head(void)
{
struct journal_head *ret;
- static unsigned long last_warning;
#ifdef CONFIG_JBD_DEBUG
atomic_inc(&nr_journal_heads);
ret = kmem_cache_alloc(journal_head_cache, GFP_NOFS);
if (ret == NULL) {
jbd_debug(1, "out of memory for journal_head\n");
- if (time_after(jiffies, last_warning + 5*HZ)) {
- printk(KERN_NOTICE "ENOMEM in %s, retrying.\n",
- __func__);
- last_warning = jiffies;
- }
+ printk_ratelimited(KERN_NOTICE "ENOMEM in %s, retrying.\n",
+ __func__);
+
while (ret == NULL) {
yield();
ret = kmem_cache_alloc(journal_head_cache, GFP_NOFS);
#ifdef CONFIG_JBD_DEBUG
int dropped = info.end_transaction -
be32_to_cpu(journal->j_superblock->s_sequence);
-#endif
jbd_debug(1,
"JBD: ignoring %d transaction%s from the journal.\n",
dropped, (dropped == 1) ? "" : "s");
+#endif
journal->j_transaction_sequence = ++info.end_transaction;
}
jbd_free_handle(handle);
current->journal_info = NULL;
handle = ERR_PTR(err);
- goto out;
}
-out:
return handle;
}
transaction = handle->h_transaction;
journal = transaction->t_journal;
- jbd_debug(5, "buffer_head %p, force_copy %d\n", jh, force_copy);
+ jbd_debug(5, "journal_head %p, force_copy %d\n", jh, force_copy);
JBUFFER_TRACE(jh, "entry");
repeat:
J_EXPECT_JH(jh, buffer_uptodate(jh2bh(jh)),
"Possible IO failure.\n");
page = jh2bh(jh)->b_page;
- offset = ((unsigned long) jh2bh(jh)->b_data) & ~PAGE_MASK;
+ offset = offset_in_page(jh2bh(jh)->b_data);
source = kmap_atomic(page, KM_USER0);
memcpy(jh->b_frozen_data, source+offset, jh2bh(jh)->b_size);
kunmap_atomic(source, KM_USER0);
*/
if (!tid_geq(journal->j_commit_request, target)) {
/*
- * We want a new commit: OK, mark the request and wakup the
+ * We want a new commit: OK, mark the request and wakeup the
* commit thread. We do _not_ do the commit ourselves.
*/
config QUOTA
bool "Quota support"
+ select QUOTACTL
help
If you say Y here, you will be able to set per user limits for disk
usage (also called disk quotas). Currently, it works for the
config QUOTACTL
bool
- depends on XFS_QUOTA || QUOTA
- default y
+ default n
config QUOTACTL_COMPAT
bool
/* Avoid races with quotaoff() */
if (!sb_has_quota_active(sb, cnt))
continue;
+ /* We could race with quotaon or dqget() could have failed */
+ if (!got[cnt])
+ continue;
if (!inode->i_dquot[cnt]) {
inode->i_dquot[cnt] = got[cnt];
got[cnt] = NULL;
qsize_t rsv_space = 0;
struct dquot *transfer_from[MAXQUOTAS] = {};
int cnt, ret = 0;
+ char is_valid[MAXQUOTAS] = {};
char warntype_to[MAXQUOTAS];
char warntype_from_inodes[MAXQUOTAS], warntype_from_space[MAXQUOTAS];
space = cur_space + rsv_space;
/* Build the transfer_from list and check the limits */
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
+ /*
+ * Skip changes for same uid or gid or for turned off quota-type.
+ */
if (!transfer_to[cnt])
continue;
+ /* Avoid races with quotaoff() */
+ if (!sb_has_quota_active(inode->i_sb, cnt))
+ continue;
+ is_valid[cnt] = 1;
transfer_from[cnt] = inode->i_dquot[cnt];
ret = check_idq(transfer_to[cnt], 1, warntype_to + cnt);
if (ret)
* Finally perform the needed transfer from transfer_from to transfer_to
*/
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
- /*
- * Skip changes for same uid or gid or for turned off quota-type.
- */
- if (!transfer_to[cnt])
+ if (!is_valid[cnt])
continue;
-
/* Due to IO error we might not have transfer_from[] structure */
if (transfer_from[cnt]) {
warntype_from_inodes[cnt] =
mark_all_dquot_dirty(transfer_from);
mark_all_dquot_dirty(transfer_to);
- /* Pass back references to put */
- for (cnt = 0; cnt < MAXQUOTAS; cnt++)
- transfer_to[cnt] = transfer_from[cnt];
-warn:
flush_warnings(transfer_to, warntype_to);
flush_warnings(transfer_from, warntype_from_inodes);
flush_warnings(transfer_from, warntype_from_space);
- return ret;
+ /* Pass back references to put */
+ for (cnt = 0; cnt < MAXQUOTAS; cnt++)
+ if (is_valid[cnt])
+ transfer_to[cnt] = transfer_from[cnt];
+ return 0;
over_quota:
spin_unlock(&dq_data_lock);
up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
- goto warn;
+ flush_warnings(transfer_to, warntype_to);
+ return ret;
}
EXPORT_SYMBOL(__dquot_transfer);
config XFS_QUOTA
bool "XFS Quota support"
depends on XFS_FS
+ select QUOTACTL
help
If you say Y here, you will be able to set limits for disk usage on
a per user and/or a per group basis under XFS. XFS considers quota
git.openpandora.org / pandora-kernel.git / commitdiff