ARM: Merge for-2637/s3c24xx/h1940

diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 8cdeb14..8aa2f19 100644 (file)
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -30,7 +30,7 @@ static void h1940bt_enable(int on)
 {
        if (on) {
                /* Power on the chip */
-               h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
+               gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 1);
                /* Reset the chip */
                mdelay(10);
 
@@ -43,7 +43,7 @@ static void h1940bt_enable(int on)
                mdelay(10);
                gpio_set_value(S3C2410_GPH(1), 0);
                mdelay(10);
-               h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
+               gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0);
        }
 }
 
@@ -64,7 +64,14 @@ static int __devinit h1940bt_probe(struct platform_device *pdev)
 
        ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev));
        if (ret) {
-               dev_err(&pdev->dev, "could not get GPH1\n");\
+               dev_err(&pdev->dev, "could not get GPH1\n");
+               return ret;
+       }
+
+       ret = gpio_request(H1940_LATCH_BLUETOOTH_POWER, dev_name(&pdev->dev));
+       if (ret) {
+               gpio_free(S3C2410_GPH(1));
+               dev_err(&pdev->dev, "could not get BT_POWER\n");
                return ret;
        }
 

diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
index d8a8327..97e42bf 100644 (file)
--- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
+++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
@@ -14,51 +14,30 @@
 #ifndef __ASM_ARCH_H1940_LATCH_H
 #define __ASM_ARCH_H1940_LATCH_H
 
+#include <mach/gpio.h>
 
-#ifndef __ASSEMBLY__
-#define H1940_LATCH            ((void __force __iomem *)0xF8000000)
-#else
-#define H1940_LATCH            0xF8000000
-#endif
-
-#define H1940_PA_LATCH         (S3C2410_CS2)
+#define H1940_LATCH_GPIO(x)            (S3C_GPIO_END + (x))
 
 /* SD layer latch */
 
-#define H1940_LATCH_SDQ1               (1<<16)
-#define H1940_LATCH_LCD_P1             (1<<17)
-#define H1940_LATCH_LCD_P2             (1<<18)
-#define H1940_LATCH_LCD_P3             (1<<19)
-#define H1940_LATCH_MAX1698_nSHUTDOWN  (1<<20)         /* LCD backlight */
-#define H1940_LATCH_LED_RED            (1<<21)
-#define H1940_LATCH_SDQ7               (1<<22)
-#define H1940_LATCH_USB_DP             (1<<23)
+#define H1940_LATCH_LCD_P0             H1940_LATCH_GPIO(0)
+#define H1940_LATCH_LCD_P1             H1940_LATCH_GPIO(1)
+#define H1940_LATCH_LCD_P2             H1940_LATCH_GPIO(2)
+#define H1940_LATCH_LCD_P3             H1940_LATCH_GPIO(3)
+#define H1940_LATCH_MAX1698_nSHUTDOWN  H1940_LATCH_GPIO(4)
+#define H1940_LATCH_LED_RED            H1940_LATCH_GPIO(5)
+#define H1940_LATCH_SDQ7               H1940_LATCH_GPIO(6)
+#define H1940_LATCH_USB_DP             H1940_LATCH_GPIO(7)
 
 /* CPU layer latch */
 
-#define H1940_LATCH_UDA_POWER          (1<<24)
-#define H1940_LATCH_AUDIO_POWER                (1<<25)
-#define H1940_LATCH_SM803_ENABLE       (1<<26)
-#define H1940_LATCH_LCD_P4             (1<<27)
-#define H1940_LATCH_CPUQ5              (1<<28)         /* untraced */
-#define H1940_LATCH_BLUETOOTH_POWER    (1<<29)         /* active high */
-#define H1940_LATCH_LED_GREEN          (1<<30)
-#define H1940_LATCH_LED_FLASH          (1<<31)
-
-/* default settings */
-
-#define H1940_LATCH_DEFAULT            \
-       H1940_LATCH_LCD_P4              | \
-       H1940_LATCH_SM803_ENABLE        | \
-       H1940_LATCH_SDQ1                | \
-       H1940_LATCH_LCD_P1              | \
-       H1940_LATCH_LCD_P2              | \
-       H1940_LATCH_LCD_P3              | \
-       H1940_LATCH_MAX1698_nSHUTDOWN   | \
-       H1940_LATCH_CPUQ5
-
-/* control functions */
-
-extern void h1940_latch_control(unsigned int clear, unsigned int set);
+#define H1940_LATCH_UDA_POWER          H1940_LATCH_GPIO(8)
+#define H1940_LATCH_AUDIO_POWER                H1940_LATCH_GPIO(9)
+#define H1940_LATCH_SM803_ENABLE       H1940_LATCH_GPIO(10)
+#define H1940_LATCH_LCD_P4             H1940_LATCH_GPIO(11)
+#define H1940_LATCH_SD_POWER           H1940_LATCH_GPIO(12)
+#define H1940_LATCH_BLUETOOTH_POWER    H1940_LATCH_GPIO(13)
+#define H1940_LATCH_LED_GREEN          H1940_LATCH_GPIO(14)
+#define H1940_LATCH_LED_FLASH          H1940_LATCH_GPIO(15)
 
 #endif /* __ASM_ARCH_H1940_LATCH_H */

diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 98c5c9e..d7ada8c 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -24,6 +24,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/pwm_backlight.h>
+#include <linux/i2c.h>
 #include <video/platform_lcd.h>
 
 #include <linux/mmc/host.h>
@@ -59,6 +60,14 @@
 #include <plat/mci.h>
 #include <plat/ts.h>
 
+#include <sound/uda1380.h>
+
+#define H1940_LATCH            ((void __force __iomem *)0xF8000000)
+
+#define H1940_PA_LATCH         S3C2410_CS2
+
+#define H1940_LATCH_BIT(x)     (1 << ((x) + 16 - S3C_GPIO_END))
+
 static struct map_desc h1940_iodesc[] __initdata = {
        [0] = {
                .virtual        = (unsigned long)H1940_LATCH,
@@ -100,9 +109,9 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
 
 /* Board control latch control */
 
-static unsigned int latch_state = H1940_LATCH_DEFAULT;
+static unsigned int latch_state;
 
-void h1940_latch_control(unsigned int clear, unsigned int set)
+static void h1940_latch_control(unsigned int clear, unsigned int set)
 {
        unsigned long flags;
 
@@ -116,7 +125,42 @@ void h1940_latch_control(unsigned int clear, unsigned int set)
        local_irq_restore(flags);
 }
 
-EXPORT_SYMBOL_GPL(h1940_latch_control);
+static inline int h1940_gpiolib_to_latch(int offset)
+{
+       return 1 << (offset + 16);
+}
+
+static void h1940_gpiolib_latch_set(struct gpio_chip *chip,
+                                       unsigned offset, int value)
+{
+       int latch_bit = h1940_gpiolib_to_latch(offset);
+
+       h1940_latch_control(value ? 0 : latch_bit,
+               value ? latch_bit : 0);
+}
+
+static int h1940_gpiolib_latch_output(struct gpio_chip *chip,
+                                       unsigned offset, int value)
+{
+       h1940_gpiolib_latch_set(chip, offset, value);
+       return 0;
+}
+
+static int h1940_gpiolib_latch_get(struct gpio_chip *chip,
+                                       unsigned offset)
+{
+       return (latch_state >> (offset + 16)) & 1;
+}
+
+struct gpio_chip h1940_latch_gpiochip = {
+       .base                   = H1940_LATCH_GPIO(0),
+       .owner                  = THIS_MODULE,
+       .label                  = "H1940_LATCH",
+       .ngpio                  = 16,
+       .direction_output       = h1940_gpiolib_latch_output,
+       .set                    = h1940_gpiolib_latch_set,
+       .get                    = h1940_gpiolib_latch_get,
+};
 
 static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 {
@@ -125,10 +169,10 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
        switch (cmd)
        {
                case S3C2410_UDC_P_ENABLE :
-                       h1940_latch_control(0, H1940_LATCH_USB_DP);
+                       gpio_set_value(H1940_LATCH_USB_DP, 1);
                        break;
                case S3C2410_UDC_P_DISABLE :
-                       h1940_latch_control(H1940_LATCH_USB_DP, 0);
+                       gpio_set_value(H1940_LATCH_USB_DP, 0);
                        break;
                case S3C2410_UDC_P_RESET :
                        break;
@@ -199,10 +243,25 @@ static struct platform_device h1940_device_bluetooth = {
        .id               = -1,
 };
 
+static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
+{
+       switch (power_mode) {
+       case MMC_POWER_OFF:
+               gpio_set_value(H1940_LATCH_SD_POWER, 0);
+               break;
+       case MMC_POWER_UP:
+       case MMC_POWER_ON:
+               gpio_set_value(H1940_LATCH_SD_POWER, 1);
+               break;
+       default:
+               break;
+       };
+}
+
 static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
        .gpio_detect   = S3C2410_GPF(5),
        .gpio_wprotect = S3C2410_GPH(8),
-       .set_power     = NULL,
+       .set_power     = h1940_set_mmc_power,
        .ocr_avail     = MMC_VDD_32_33,
 };
 
@@ -213,15 +272,32 @@ static int h1940_backlight_init(struct device *dev)
        gpio_direction_output(S3C2410_GPB(0), 0);
        s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
        s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+       gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
 
        return 0;
 }
 
+static int h1940_backlight_notify(struct device *dev, int brightness)
+{
+       if (!brightness) {
+               gpio_direction_output(S3C2410_GPB(0), 1);
+               gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
+       } else {
+               gpio_direction_output(S3C2410_GPB(0), 0);
+               s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+               s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+               gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
+       }
+       return brightness;
+}
+
 static void h1940_backlight_exit(struct device *dev)
 {
        gpio_direction_output(S3C2410_GPB(0), 1);
+       gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
 }
 
+
 static struct platform_pwm_backlight_data backlight_data = {
        .pwm_id         = 0,
        .max_brightness = 100,
@@ -229,6 +305,7 @@ static struct platform_pwm_backlight_data backlight_data = {
        /* tcnt = 0x31 */
        .pwm_period_ns  = 36296,
        .init           = h1940_backlight_init,
+       .notify         = h1940_backlight_notify,
        .exit           = h1940_backlight_exit,
 };
 
@@ -247,19 +324,37 @@ static void h1940_lcd_power_set(struct plat_lcd_data *pd,
        int value;
 
        if (!power) {
-               /* set to 3ec */
-               gpio_direction_output(S3C2410_GPC(0), 0);
+               gpio_set_value(S3C2410_GPC(0), 0);
                /* wait for 3ac */
                do {
                        value = gpio_get_value(S3C2410_GPC(6));
                } while (value);
-               /* set to 38c */
-               gpio_direction_output(S3C2410_GPC(5), 0);
+
+               gpio_set_value(H1940_LATCH_LCD_P2, 0);
+               gpio_set_value(H1940_LATCH_LCD_P3, 0);
+               gpio_set_value(H1940_LATCH_LCD_P4, 0);
+
+               gpio_direction_output(S3C2410_GPC(1), 0);
+               gpio_direction_output(S3C2410_GPC(4), 0);
+
+               gpio_set_value(H1940_LATCH_LCD_P1, 0);
+               gpio_set_value(H1940_LATCH_LCD_P0, 0);
+
+               gpio_set_value(S3C2410_GPC(5), 0);
+
        } else {
-               /* Set to 3ac */
-               gpio_direction_output(S3C2410_GPC(5), 1);
-               /* Set to 3ad */
-               gpio_direction_output(S3C2410_GPC(0), 1);
+               gpio_set_value(H1940_LATCH_LCD_P0, 1);
+               gpio_set_value(H1940_LATCH_LCD_P1, 1);
+
+               s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2));
+               s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2));
+
+               gpio_set_value(S3C2410_GPC(5), 1);
+               gpio_set_value(S3C2410_GPC(0), 1);
+
+               gpio_set_value(H1940_LATCH_LCD_P3, 1);
+               gpio_set_value(H1940_LATCH_LCD_P2, 1);
+               gpio_set_value(H1940_LATCH_LCD_P4, 1);
        }
 }
 
@@ -273,12 +368,26 @@ static struct platform_device h1940_lcd_powerdev = {
        .dev.platform_data      = &h1940_lcd_power_data,
 };
 
+static struct uda1380_platform_data uda1380_info = {
+       .gpio_power     = H1940_LATCH_UDA_POWER,
+       .gpio_reset     = S3C2410_GPA(12),
+       .dac_clk        = UDA1380_DAC_CLK_SYSCLK,
+};
+
+static struct i2c_board_info h1940_i2c_devices[] = {
+       {
+               I2C_BOARD_INFO("uda1380", 0x1a),
+               .platform_data = &uda1380_info,
+       },
+};
+
 static struct platform_device *h1940_devices[] __initdata = {
        &s3c_device_ohci,
        &s3c_device_lcd,
        &s3c_device_wdt,
        &s3c_device_i2c0,
        &s3c_device_iis,
+       &s3c_device_pcm,
        &s3c_device_usbgadget,
        &h1940_device_leds,
        &h1940_device_bluetooth,
@@ -303,6 +412,10 @@ static void __init h1940_map_io(void)
        memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
 #endif
        s3c_pm_init();
+
+       /* Add latch gpio chip, set latch initial value */
+       h1940_latch_control(0, 0);
+       WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
 }
 
 /* H1940 and RX3715 need to reserve this for suspend */
@@ -340,12 +453,38 @@ static void __init h1940_init(void)
        writel(tmp, S3C2410_UPLLCON);
 
        gpio_request(S3C2410_GPC(0), "LCD power");
+       gpio_request(S3C2410_GPC(1), "LCD power");
+       gpio_request(S3C2410_GPC(4), "LCD power");
        gpio_request(S3C2410_GPC(5), "LCD power");
        gpio_request(S3C2410_GPC(6), "LCD power");
-
+       gpio_request(H1940_LATCH_LCD_P0, "LCD power");
+       gpio_request(H1940_LATCH_LCD_P1, "LCD power");
+       gpio_request(H1940_LATCH_LCD_P2, "LCD power");
+       gpio_request(H1940_LATCH_LCD_P3, "LCD power");
+       gpio_request(H1940_LATCH_LCD_P4, "LCD power");
+       gpio_request(H1940_LATCH_MAX1698_nSHUTDOWN, "LCD power");
+       gpio_direction_output(S3C2410_GPC(0), 0);
+       gpio_direction_output(S3C2410_GPC(1), 0);
+       gpio_direction_output(S3C2410_GPC(4), 0);
+       gpio_direction_output(S3C2410_GPC(5), 0);
        gpio_direction_input(S3C2410_GPC(6));
+       gpio_direction_output(H1940_LATCH_LCD_P0, 0);
+       gpio_direction_output(H1940_LATCH_LCD_P1, 0);
+       gpio_direction_output(H1940_LATCH_LCD_P2, 0);
+       gpio_direction_output(H1940_LATCH_LCD_P3, 0);
+       gpio_direction_output(H1940_LATCH_LCD_P4, 0);
+       gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
+
+       gpio_request(H1940_LATCH_USB_DP, "USB pullup");
+       gpio_direction_output(H1940_LATCH_USB_DP, 0);
+
+       gpio_request(H1940_LATCH_SD_POWER, "SD power");
+       gpio_direction_output(H1940_LATCH_SD_POWER, 0);
 
        platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
+
+       i2c_register_board_info(0, h1940_i2c_devices,
+               ARRAY_SIZE(h1940_i2c_devices));
 }
 
 MACHINE_START(H1940, "IPAQ-H1940")

diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 984bf66..5a27b1b 100644 (file)
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -69,6 +69,7 @@ config S3C24XX_GPIO_EXTRA
        int
        default 128 if S3C24XX_GPIO_EXTRA128
        default 64 if S3C24XX_GPIO_EXTRA64
+       default 16 if ARCH_H1940
        default 0
 
 config S3C24XX_GPIO_EXTRA64