[MIPS] IP22: Get rid of volatile in IP22 core code.
authorRalf Baechle <ralf@linux-mips.org>
Thu, 26 Apr 2007 14:46:24 +0000 (15:46 +0100)
committerRalf Baechle <ralf@linux-mips.org>
Fri, 27 Apr 2007 15:20:23 +0000 (16:20 +0100)
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/sgi-ip22/ip22-nvram.c
arch/mips/sgi-ip22/ip22-time.c
include/asm-mips/sgi/hpc3.h
include/asm-mips/sgi/ip22.h
include/asm-mips/sgi/mc.h

index fd29fd4..e19d60d 100644 (file)
@@ -52,8 +52,7 @@
  * national semiconductor nv ram chip the op code is 3 bits and
  * the address is 6/8 bits.
  */
-static inline void eeprom_cmd(volatile unsigned int *ctrl, unsigned cmd,
-                             unsigned reg)
+static inline void eeprom_cmd(unsigned int *ctrl, unsigned cmd, unsigned reg)
 {
        unsigned short ser_cmd;
        int i;
@@ -61,33 +60,34 @@ static inline void eeprom_cmd(volatile unsigned int *ctrl, unsigned cmd,
        ser_cmd = cmd | (reg << (16 - BITS_IN_COMMAND));
        for (i = 0; i < BITS_IN_COMMAND; i++) {
                if (ser_cmd & (1<<15))  /* if high order bit set */
-                       *ctrl |= EEPROM_DATO;
+                       writel(readl(ctrl) | EEPROM_DATO, ctrl);
                else
-                       *ctrl &= ~EEPROM_DATO;
-               *ctrl &= ~EEPROM_ECLK;
-               *ctrl |= EEPROM_ECLK;
+                       writel(readl(ctrl) & ~EEPROM_DATO, ctrl);
+               writel(readl(ctrl) & ~EEPROM_ECLK, ctrl);
+               writel(readl(ctrl) | EEPROM_ECLK, ctrl);
                ser_cmd <<= 1;
        }
-       *ctrl &= ~EEPROM_DATO;  /* see data sheet timing diagram */
+       /* see data sheet timing diagram */
+       writel(readl(ctrl) & ~EEPROM_DATO, ctrl);
 }
 
-unsigned short ip22_eeprom_read(volatile unsigned int *ctrl, int reg)
+unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg)
 {
        unsigned short res = 0;
        int i;
 
-       *ctrl &= ~EEPROM_EPROT;
+       writel(readl(ctrl) & ~EEPROM_EPROT, ctrl);
        eeprom_cs_on(ctrl);
        eeprom_cmd(ctrl, EEPROM_READ, reg);
 
        /* clock the data ouf of serial mem */
        for (i = 0; i < 16; i++) {
-               *ctrl &= ~EEPROM_ECLK;
+               writel(readl(ctrl) & ~EEPROM_ECLK, ctrl);
                delay();
-               *ctrl |= EEPROM_ECLK;
+               writel(readl(ctrl) | EEPROM_ECLK, ctrl);
                delay();
                res <<= 1;
-               if (*ctrl & EEPROM_DATI)
+               if (readl(ctrl) & EEPROM_DATI)
                        res |= 1;
        }
 
index 2055547..8e88a44 100644 (file)
@@ -94,7 +94,7 @@ static int indy_rtc_set_time(unsigned long tim)
 static unsigned long dosample(void)
 {
        u32 ct0, ct1;
-       volatile u8 msb, lsb;
+       u8 msb, lsb;
 
        /* Start the counter. */
        sgint->tcword = (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL |
@@ -107,21 +107,21 @@ static unsigned long dosample(void)
 
        /* Latch and spin until top byte of counter2 is zero */
        do {
-               sgint->tcword = SGINT_TCWORD_CNT2 | SGINT_TCWORD_CLAT;
-               lsb = sgint->tcnt2;
-               msb = sgint->tcnt2;
+               writeb(SGINT_TCWORD_CNT2 | SGINT_TCWORD_CLAT, &sgint->tcword);
+               lsb = readb(&sgint->tcnt2);
+               msb = readb(&sgint->tcnt2);
                ct1 = read_c0_count();
        } while (msb);
 
        /* Stop the counter. */
-       sgint->tcword = (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL |
-                        SGINT_TCWORD_MSWST);
+       writeb(sgint->tcword, (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL |
+                              SGINT_TCWORD_MSWST));
        /*
         * Return the difference, this is how far the r4k counter increments
         * for every 1/HZ seconds. We round off the nearest 1 MHz of master
         * clock (= 1000000 / HZ / 2).
         */
-       /*return (ct1 - ct0 + (500000/HZ/2)) / (500000/HZ) * (500000/HZ);*/
+
        return (ct1 - ct0) / (500000/HZ) * (500000/HZ);
 }
 
index fcec52b..c4729f5 100644 (file)
@@ -206,7 +206,7 @@ struct hpc3_regs {
 #define HPC3_GIOMISC_ERTIME    0x1     /* Enable external timer real time. */
 #define HPC3_GIOMISC_DENDIAN   0x2     /* dma descriptor endian, 1=lit 0=big */
 
-       volatile u32 eeprom;            /* EEPROM data reg. */
+       u32 eeprom;                     /* EEPROM data reg. */
 #define HPC3_EEPROM_EPROT      0x01    /* Protect register enable */
 #define HPC3_EEPROM_CSEL       0x02    /* Chip select */
 #define HPC3_EEPROM_ECLK       0x04    /* EEPROM clock */
index 6592f3b..f4981c4 100644 (file)
@@ -72,7 +72,7 @@
 
 #define ip22_is_fullhouse()    (sgioc->sysid & SGIOC_SYSID_FULLHOUSE)
 
-extern unsigned short ip22_eeprom_read(volatile unsigned int *ctrl, int reg);
+extern unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg);
 extern unsigned short ip22_nvram_read(int reg);
 
 #endif
index c52f783..1576c23 100644 (file)
@@ -57,7 +57,7 @@ struct sgimc_regs {
        volatile u32 divider;   /* Divider reg for RPSS */
 
        u32 _unused5;
-       volatile u32 eeprom;    /* EEPROM byte reg for r4k */
+       u32 eeprom;             /* EEPROM byte reg for r4k */
 #define SGIMC_EEPROM_PRE       0x00000001 /* eeprom chip PRE pin assertion */
 #define SGIMC_EEPROM_CSEL      0x00000002 /* Active high, eeprom chip select */
 #define SGIMC_EEPROM_SECLOCK   0x00000004 /* EEPROM serial clock */