piix: backport short cables support from ata_piix.c
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Mon, 9 Jul 2007 21:17:58 +0000 (23:17 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Mon, 9 Jul 2007 21:17:58 +0000 (23:17 +0200)
Backport short cables support from ata_piix.c.

This patch should allow UDMA > 2 modes on:
- Acer 5602WLMi
- Acer 3682WLMi
- Asus W5F
- Acer Aspire 2023WLMi

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
drivers/ide/pci/piix.c

index 1547c37..2e0b29e 100644 (file)
@@ -1,5 +1,5 @@
 /*
- *  linux/drivers/ide/pci/piix.c       Version 0.47    February 8, 2007
+ *  linux/drivers/ide/pci/piix.c       Version 0.50    Jun 10, 2007
  *
  *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
  *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
@@ -394,12 +394,43 @@ static void piix_dma_clear_irq(ide_drive_t *drive)
        hwif->OUTB(dma_stat, hwif->dma_status);
 }
 
+struct ich_laptop {
+       u16 device;
+       u16 subvendor;
+       u16 subdevice;
+};
+
+/*
+ *     List of laptops that use short cables rather than 80 wire
+ */
+
+static const struct ich_laptop ich_laptop[] = {
+       /* devid, subvendor, subdev */
+       { 0x27DF, 0x0005, 0x0280 },     /* ICH7 on Acer 5602WLMi */
+       { 0x27DF, 0x1025, 0x0110 },     /* ICH7 on Acer 3682WLMi */
+       { 0x27DF, 0x1043, 0x1267 },     /* ICH7 on Asus W5F */
+       { 0x24CA, 0x1025, 0x0061 },     /* ICH4 on Acer Aspire 2023WLMi */
+       /* end marker */
+       { 0, }
+};
+
 static u8 __devinit piix_cable_detect(ide_hwif_t *hwif)
 {
-       struct pci_dev *dev = hwif->pci_dev;
+       struct pci_dev *pdev = hwif->pci_dev;
+       const struct ich_laptop *lap = &ich_laptop[0];
        u8 reg54h = 0, mask = hwif->channel ? 0xc0 : 0x30;
 
-       pci_read_config_byte(dev, 0x54, &reg54h);
+       /* check for specials */
+       while (lap->device) {
+               if (lap->device == pdev->device &&
+                   lap->subvendor == pdev->subsystem_vendor &&
+                   lap->subdevice == pdev->subsystem_device) {
+                       return ATA_CBL_PATA40_SHORT;
+               }
+               lap++;
+       }
+
+       pci_read_config_byte(pdev, 0x54, &reg54h);
 
        return (reg54h & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
 }