thermal: exynos: remove TMU_SUPPORT_READY_STATUS flag

Replace TMU_SUPPORT_READY_STATUS flag check in
exynos_tmu_initialize() by an explicit check for a SoC type
(all SoC types except Exynos5440 have TMU_SUPPORT_READY_STATUS
flag set in their struct exynos_tmu_init_data instances).

This is a preparation for introducing per-SoC type tmu_initialize
method.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 4f7cad9..33ee527 100644 (file)
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -153,7 +153,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
        if (!IS_ERR(data->clk_sec))
                clk_enable(data->clk_sec);
 
-       if (TMU_SUPPORTS(pdata, READY_STATUS)) {
+       if (data->soc != SOC_ARCH_EXYNOS5440) {
                status = readb(data->base + EXYNOS_TMU_REG_STATUS);
                if (!status) {
                        ret = -EBUSY;

diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index ebe39b4..d3d9205 100644 (file)
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -54,8 +54,6 @@ enum soc_type {
  *                     be reloaded.
  * TMU_SUPPORT_FALLING_TRIP - This features shows that interrupt can
  *                     be registered for falling trips also.
- * TMU_SUPPORT_READY_STATUS - This feature tells that the TMU current
- *                     state(active/idle) can be checked.
  * TMU_SUPPORT_EMUL_TIME - This features allows to set next temp emulation
  *                     sample time.
  * TMU_SUPPORT_ADDRESS_MULTIPLE - This feature tells that the different TMU
@@ -66,9 +64,8 @@ enum soc_type {
 #define TMU_SUPPORT_MULTI_INST                 BIT(1)
 #define TMU_SUPPORT_TRIM_RELOAD                        BIT(2)
 #define TMU_SUPPORT_FALLING_TRIP               BIT(3)
-#define TMU_SUPPORT_READY_STATUS               BIT(4)
-#define TMU_SUPPORT_EMUL_TIME                  BIT(5)
-#define TMU_SUPPORT_ADDRESS_MULTIPLE           BIT(6)
+#define TMU_SUPPORT_EMUL_TIME                  BIT(4)
+#define TMU_SUPPORT_ADDRESS_MULTIPLE           BIT(5)
 
 #define TMU_SUPPORTS(a, b)     (a->features & TMU_SUPPORT_ ## b)
 

diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index f81c940..c327120 100644 (file)
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -73,7 +73,6 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
                .freq_tab_count = 2,
                .type = SOC_ARCH_EXYNOS4210,
                .registers = &exynos4210_tmu_registers,
-               .features = TMU_SUPPORT_READY_STATUS,
                },
        },
        .tmu_count = 1,
@@ -133,8 +132,7 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = {
        .freq_tab_count = 2, \
        .registers = &exynos3250_tmu_registers, \
        .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
-                       TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
-                       TMU_SUPPORT_EMUL_TIME)
+                       TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_EMUL_TIME)
 #endif
 
 #if defined(CONFIG_SOC_EXYNOS3250)
@@ -204,8 +202,7 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
        .freq_tab_count = 2, \
        .registers = &exynos4412_tmu_registers, \
        .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
-                       TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
-                       TMU_SUPPORT_EMUL_TIME)
+                       TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_EMUL_TIME)
 #endif
 
 #if defined(CONFIG_SOC_EXYNOS4412)
@@ -291,7 +288,7 @@ static const struct exynos_tmu_registers exynos5260_tmu_registers = {
        __EXYNOS5260_TMU_DATA \
        .type = SOC_ARCH_EXYNOS5260, \
        .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
-                       TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME)
+                       TMU_SUPPORT_EMUL_TIME)
 
 struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
        .tmu_data = {
@@ -364,14 +361,13 @@ static const struct exynos_tmu_registers exynos5420_tmu_registers = {
        __EXYNOS5420_TMU_DATA \
        .type = SOC_ARCH_EXYNOS5250, \
        .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
-                       TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME)
+                       TMU_SUPPORT_EMUL_TIME)
 
 #define EXYNOS5420_TMU_DATA_SHARED \
        __EXYNOS5420_TMU_DATA \
        .type = SOC_ARCH_EXYNOS5420_TRIMINFO, \
        .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
-                       TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME | \
-                       TMU_SUPPORT_ADDRESS_MULTIPLE)
+                       TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE)
 
 struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
        .tmu_data = {