* 'urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: fix uninitialized task_ratelimit
</para>
<para>
The simplest way to activate the FLASH based bad block table support
- is to set the option NAND_USE_FLASH_BBT in the option field of
+ is to set the option NAND_BBT_USE_FLASH in the bbt_option field of
the nand chip structure before calling nand_scan(). For AG-AND
chips is this done by default.
This activates the default FLASH based bad block table functionality
done according to the default builtin scheme.
</para>
</sect2>
- <sect2 id="User_space_placement_selection">
- <title>User space placement selection</title>
- <para>
- All non ecc functions like mtd->read and mtd->write use an internal
- structure, which can be set by an ioctl. This structure is preset
- to the autoplacement default.
- <programlisting>
- ioctl (fd, MEMSETOOBSEL, oobsel);
- </programlisting>
- oobsel is a pointer to a user supplied structure of type
- nand_oobconfig. The contents of this structure must match the
- criteria of the filesystem, which will be used. See an example in utils/nandwrite.c.
- </para>
- </sect2>
</sect1>
<sect1 id="Spare_area_autoplacement_default">
<title>Spare area autoplacement default schemes</title>
These constants are defined in nand.h. They are ored together to describe
the functionality.
<programlisting>
-/* Use a flash based bad block table. This option is parsed by the
- * default bad block table function (nand_default_bbt). */
-#define NAND_USE_FLASH_BBT 0x00010000
/* The hw ecc generator provides a syndrome instead a ecc value on read
* This can only work if we have the ecc bytes directly behind the
* data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */
--- /dev/null
+* Atmel Data Flash
+
+Required properties:
+- compatible : "atmel,<model>", "atmel,<series>", "atmel,dataflash".
+
+Example:
+
+flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+};
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(afeb9260_nand_partition);
- return afeb9260_nand_partition;
-}
-
static struct atmel_nand_data __initdata afeb9260_nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
.bus_width_16 = 0,
+ .parts = afeb9260_nand_partition,
+ .num_parts = ARRAY_SIZE(afeb9260_nand_partition),
};
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(cam60_nand_partition);
- return cam60_nand_partition;
-}
-
static struct atmel_nand_data __initdata cam60_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not there
.rdy_pin = AT91_PIN_PA9,
.enable_pin = AT91_PIN_PA7,
- .partition_info = nand_partitions,
+ .parts = cam60_nand_partition,
+ .num_parts = ARRAY_SIZE(cam60_nand_partition),
};
static struct sam9_smc_config __initdata cam60_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(cap9adk_nand_partitions);
- return cap9adk_nand_partitions;
-}
-
static struct atmel_nand_data __initdata cap9adk_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
// .rdy_pin = ... not connected
.enable_pin = AT91_PIN_PD15,
- .partition_info = nand_partitions,
+ .parts = cap9adk_nand_partitions,
+ .num_parts = ARRAY_SIZE(cap9adk_nand_partitions),
};
static struct sam9_smc_config __initdata cap9adk_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(kb9202_nand_partition);
- return kb9202_nand_partition;
-}
-
static struct atmel_nand_data __initdata kb9202_nand_data = {
.ale = 22,
.cle = 21,
// .det_pin = ... not there
.rdy_pin = AT91_PIN_PC29,
.enable_pin = AT91_PIN_PC28,
- .partition_info = nand_partitions,
+ .parts = kb9202_nand_partition,
+ .num_parts = ARRAY_SIZE(kb9202_nand_partition),
};
static void __init kb9202_board_init(void)
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(neocore926_nand_partition);
- return neocore926_nand_partition;
-}
-
static struct atmel_nand_data __initdata neocore926_nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PB19,
.rdy_pin_active_low = 1,
.enable_pin = AT91_PIN_PD15,
- .partition_info = nand_partitions,
+ .parts = neocore926_nand_partition,
+ .num_parts = ARRAY_SIZE(neocore926_nand_partition),
};
static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(dk_nand_partition);
- return dk_nand_partition;
-}
-
static struct atmel_nand_data __initdata dk_nand_data = {
.ale = 22,
.cle = 21,
.det_pin = AT91_PIN_PB1,
.rdy_pin = AT91_PIN_PC2,
// .enable_pin = ... not there
- .partition_info = nand_partitions,
+ .parts = dk_nand_partition,
+ .num_parts = ARRAY_SIZE(dk_nand_partition),
};
#define DK_FLASH_BASE AT91_CHIPSELECT_0
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 22,
.cle = 21,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PC15,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
/* det_pin is not connected */
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
/* det_pin is not connected */
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PC8,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PD17,
.enable_pin = AT91_PIN_PB6,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
},
};
-static struct mtd_partition * __init
-snapper9260_nand_partition_info(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(snapper9260_nand_partitions);
- return snapper9260_nand_partitions;
-}
-
static struct atmel_nand_data __initdata snapper9260_nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PC13,
- .partition_info = snapper9260_nand_partition_info,
+ .parts = snapper9260_nand_partitions,
+ .num_parts = ARRAY_SIZE(snapper9260_nand_partitions),
.bus_width_16 = 0,
};
}
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = {
}
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(yl9200_nand_partition);
- return yl9200_nand_partition;
-}
-
static struct atmel_nand_data __initdata yl9200_nand_data = {
.ale = 6,
.cle = 7,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */
.enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */
- .partition_info = nand_partitions,
+ .parts = yl9200_nand_partition,
+ .num_parts = ARRAY_SIZE(yl9200_nand_partition),
};
/*
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */
- struct mtd_partition* (*partition_info)(int, int*);
+ struct mtd_partition *parts;
+ unsigned int num_parts;
};
extern void __init at91_add_device_nand(struct atmel_nand_data *data);
.nr_parts = ARRAY_SIZE(da830_evm_nand_partitions),
.ecc_mode = NAND_ECC_HW,
.ecc_bits = 4,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.bbt_td = &da830_evm_nand_bbt_main_descr,
.bbt_md = &da830_evm_nand_bbt_mirror_descr,
.timing = &da830_evm_nandflash_timing,
.nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
.ecc_bits = 4,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.timing = &da850_evm_nandflash_timing,
};
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW_SYNDROME,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
};
static struct resource davinci_nand_resources[] = {
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};
.parts = davinci_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.timing = &davinci_evm_nandflash_timing,
};
.parts = mityomapl138_nandflash_partition,
.nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT | NAND_BUSWIDTH_16,
+ .bbt_options = NAND_BBT_USE_FLASH,
+ .options = NAND_BUSWIDTH_16,
.ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */
};
.parts = davinci_ntosd2_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
};
static struct resource davinci_ntosd2_nandflash_resource[] = {
.parts = nand_partitions,
.nr_parts = ARRAY_SIZE(nand_partitions),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 1,
};
nand_ecc_modes_t ecc_mode;
u8 ecc_bits;
- /* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */
+ /* e.g. NAND_BUSWIDTH_16 */
unsigned options;
+ /* e.g. NAND_BBT_USE_FLASH */
+ unsigned bbt_options;
/* Main and mirror bbt descriptor overrides */
struct nand_bbt_descr *bbt_td;
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
.name = "Linux",
- .offset = MTDPART_OFS_APPEND,
- .size = 0, /* filled in later */
+ .offset = MTDPART_OFS_RETAIN,
+ .size = TS72XX_REDBOOT_PART_SIZE,
+ /* leave so much for last partition */
}, {
.name = "RedBoot",
.offset = MTDPART_OFS_APPEND,
},
};
-static void ts72xx_nand_set_parts(uint64_t size,
- struct platform_nand_chip *chip)
-{
- /* Factory TS-72xx boards only come with 32MiB or 128MiB NAND options */
- if (size == SZ_32M || size == SZ_128M) {
- /* Set the "Linux" partition size */
- ts72xx_nand_parts[1].size = size - TS72XX_REDBOOT_PART_SIZE;
-
- chip->partitions = ts72xx_nand_parts;
- chip->nr_partitions = ARRAY_SIZE(ts72xx_nand_parts);
- } else {
- pr_warning("Unknown nand disk size:%lluMiB\n", size >> 20);
- }
-}
-
static struct platform_nand_data ts72xx_nand_data = {
.chip = {
.nr_chips = 1,
.chip_offset = 0,
.chip_delay = 15,
.part_probe_types = ts72xx_nand_part_probes,
- .set_parts = ts72xx_nand_set_parts,
+ .partitions = ts72xx_nand_parts,
+ .nr_partitions = ARRAY_SIZE(ts72xx_nand_parts),
},
.ctrl = {
.cmd_ctrl = ts72xx_nand_hwcontrol,
static struct pxa3xx_nand_platform_data aspenite_nand_info = {
.enable_arbiter = 1,
- .parts = aspenite_nand_partitions,
- .nr_parts = ARRAY_SIZE(aspenite_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = aspenite_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(aspenite_nand_partitions),
};
static struct i2c_board_info aspenite_i2c_info[] __initdata = {
.partitions = ts78xx_ts_nand_parts,
.nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts),
.chip_delay = 15,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
},
.ctrl = {
/*
static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
.enable_arbiter = 1,
.keep_config = 1,
- .parts = cm_x300_nand_partitions,
- .nr_parts = ARRAY_SIZE(cm_x300_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = cm_x300_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(cm_x300_nand_partitions),
};
static void __init cm_x300_init_nand(void)
static struct pxa3xx_nand_platform_data colibri_nand_info = {
.enable_arbiter = 1,
.keep_config = 1,
- .parts = colibri_nand_partitions,
- .nr_parts = ARRAY_SIZE(colibri_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = colibri_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(colibri_nand_partitions),
};
void __init colibri_pxa3xx_init_nand(void)
static struct pxa3xx_nand_platform_data littleton_nand_info = {
.enable_arbiter = 1,
- .parts = littleton_nand_partitions,
- .nr_parts = ARRAY_SIZE(littleton_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = littleton_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(littleton_nand_partitions),
};
static void __init littleton_init_nand(void)
};
static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
- .enable_arbiter = 1,
- .keep_config = 1,
- .parts = mxm_8x10_nand_partitions,
- .nr_parts = ARRAY_SIZE(mxm_8x10_nand_partitions)
+ .enable_arbiter = 1,
+ .keep_config = 1,
+ .num_cs = 1,
+ .parts[0] = mxm_8x10_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(mxm_8x10_nand_partitions)
};
static void __init mxm_8x10_nand_init(void)
static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
.enable_arbiter = 1,
.keep_config = 1,
- .parts = raumfeld_nand_partitions,
- .nr_parts = ARRAY_SIZE(raumfeld_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = raumfeld_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(raumfeld_nand_partitions),
};
/**
static struct pxa3xx_nand_platform_data zylonite_nand_info = {
.enable_arbiter = 1,
- .parts = zylonite_nand_partitions,
- .nr_parts = ARRAY_SIZE(zylonite_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = zylonite_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(zylonite_nand_partitions),
};
static void __init zylonite_init_nand(void)
struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
};
+/*
+ * Current pxa3xx_nand controller has two chip select which
+ * both be workable.
+ *
+ * Notice should be taken that:
+ * When you want to use this feature, you should not enable the
+ * keep configuration feature, for two chip select could be
+ * attached with different nand chip. The different page size
+ * and timing requirement make the keep configuration impossible.
+ */
+
+/* The max num of chip select current support */
+#define NUM_CHIP_SELECT (2)
struct pxa3xx_nand_platform_data {
/* the data flash bus is shared between the Static Memory
/* allow platform code to keep OBM/bootloader defined NFC config */
int keep_config;
- const struct mtd_partition *parts;
- unsigned int nr_parts;
+ /* indicate how many chip selects will be used */
+ int num_cs;
+
+ const struct mtd_partition *parts[NUM_CHIP_SELECT];
+ unsigned int nr_parts[NUM_CHIP_SELECT];
const struct pxa3xx_nand_flash * flash;
size_t num_flash;
},
};
-static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(nand_partitions);
- return nand_partitions;
-}
static struct atmel_nand_data atngw100mkii_nand_data __initdata = {
.cle = 21,
.rdy_pin = GPIO_PIN_PB(28),
.enable_pin = GPIO_PIN_PE(23),
.bus_width_16 = true,
- .partition_info = nand_part_info,
+ .parts = nand_partitions,
+ .num_parts = ARRAY_SIZE(nand_partitions),
};
#endif
},
};
-static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(nand_partitions);
- return nand_partitions;
-}
-
static struct atmel_nand_data atstk1006_nand_data __initdata = {
.cle = 21,
.ale = 22,
.rdy_pin = GPIO_PIN_PB(30),
.enable_pin = GPIO_PIN_PB(29),
- .partition_info = nand_part_info,
+ .parts = nand_partitions,
+ .num_parts = ARRAY_SIZE(num_partitions),
};
#endif
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */
- struct mtd_partition *(*partition_info)(int size, int *num_partitions);
+ struct mtd_partition *parts;
+ unsigned int num_parts;
};
struct platform_device *
at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
this->ecc.mode = NAND_ECC_SOFT;
/* Enable the following for a flash based bad block table */
- /* this->options = NAND_USE_FLASH_BBT; */
+ /* this->bbt_options = NAND_BBT_USE_FLASH; */
/* Scan to find existence of the device */
if (nand_scan(crisv32_mtd, 1)) {
this->ecc.mode = NAND_ECC_SOFT;
/* Enable the following for a flash based bad block table */
- /* this->options = NAND_USE_FLASH_BBT; */
+ /* this->bbt_options = NAND_BBT_USE_FLASH; */
/* Scan to find existence of the device */
if (nand_scan(crisv32_mtd, 1)) {
if MTD
-config MTD_DEBUG
- bool "Debugging"
- help
- This turns on low-level debugging for the entire MTD sub-system.
- Normally, you should say 'N'.
-
-config MTD_DEBUG_VERBOSE
- int "Debugging verbosity (0 = quiet, 3 = noisy)"
- depends on MTD_DEBUG
- default "0"
- help
- Determines the verbosity level of the MTD debugging messages.
-
config MTD_TESTS
- tristate "MTD tests support"
+ tristate "MTD tests support (DANGEROUS)"
depends on m
help
This option includes various MTD tests into compilation. The tests
should normally be compiled as kernel modules. The modules perform
various checks and verifications when loaded.
+ WARNING: some of the tests will ERASE entire MTD device which they
+ test. Do not use these tests unless you really know what you do.
+
config MTD_REDBOOT_PARTS
tristate "RedBoot partition table parsing"
---help---
'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example.
config MTD_OF_PARTS
- def_bool y
+ tristate "OpenFirmware partitioning information support"
+ default Y
depends on OF
help
This provides a partition parsing function which derives
# Core functionality.
obj-$(CONFIG_MTD) += mtd.o
mtd-y := mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o
-mtd-$(CONFIG_MTD_OF_PARTS) += ofpart.o
+obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
}
static int parse_afs_partitions(struct mtd_info *mtd,
- struct mtd_partition **pparts,
- unsigned long origin)
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
{
struct mtd_partition *parts;
u_int mask, off, idx, sz;
static int create_mtd_partitions(struct mtd_info *master,
struct mtd_partition **pparts,
- unsigned long origin)
+ struct mtd_part_parser_data *data)
{
struct ar7_bin_rec header;
unsigned int offset;
if (((major << 8) | minor) < 0x3131) {
/* CFI version 1.0 => don't trust bootloc */
- DEBUG(MTD_DEBUG_LEVEL1,
- "%s: JEDEC Vendor ID is 0x%02X Device ID is 0x%02X\n",
+ pr_debug("%s: JEDEC Vendor ID is 0x%02X Device ID is 0x%02X\n",
map->name, cfi->mfr, cfi->id);
/* AFAICS all 29LV400 with a bottom boot block have a device ID
* the 8-bit device ID.
*/
(cfi->mfr == CFI_MFR_MACRONIX)) {
- DEBUG(MTD_DEBUG_LEVEL1,
- "%s: Macronix MX29LV400C with bottom boot block"
+ pr_debug("%s: Macronix MX29LV400C with bottom boot block"
" detected\n", map->name);
extp->TopBottom = 2; /* bottom boot */
} else
extp->TopBottom = 2; /* bottom boot */
}
- DEBUG(MTD_DEBUG_LEVEL1,
- "%s: AMD CFI PRI V%c.%c has no boot block field;"
+ pr_debug("%s: AMD CFI PRI V%c.%c has no boot block field;"
" deduced %s from Device ID\n", map->name, major, minor,
extp->TopBottom == 2 ? "bottom" : "top");
}
struct map_info *map = mtd->priv;
struct cfi_private *cfi = map->fldrv_priv;
if (cfi->cfiq->BufWriteTimeoutTyp) {
- DEBUG(MTD_DEBUG_LEVEL1, "Using buffer write method\n" );
+ pr_debug("Using buffer write method\n" );
mtd->write = cfi_amdstd_write_buffers;
}
}
mtd->writesize = 1;
mtd->writebufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
- DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): write buffer size %d\n",
- __func__, mtd->writebufsize);
+ pr_debug("MTD %s(): write buffer size %d\n", __func__,
+ mtd->writebufsize);
mtd->reboot_notifier.notifier_call = cfi_amdstd_reboot;
return ret;
}
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
+ pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
__func__, adr, datum.x[0] );
/*
*/
oldd = map_read(map, adr);
if (map_word_equal(map, oldd, datum)) {
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): NOP\n",
+ pr_debug("MTD %s(): NOP\n",
__func__);
goto op_done;
}
datum = map_word_load(map, buf);
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
+ pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
__func__, adr, datum.x[0] );
XIP_INVAL_CACHED_RANGE(map, adr, len);
return ret;
}
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n",
+ pr_debug("MTD %s(): ERASE 0x%.8lx\n",
__func__, chip->start );
XIP_INVAL_CACHED_RANGE(map, adr, map->size);
return ret;
}
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n",
+ pr_debug("MTD %s(): ERASE 0x%.8lx\n",
__func__, adr );
XIP_INVAL_CACHED_RANGE(map, adr, len);
goto out_unlock;
chip->state = FL_LOCKING;
- DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): LOCK 0x%08lx len %d\n",
- __func__, adr, len);
+ pr_debug("MTD %s(): LOCK 0x%08lx len %d\n", __func__, adr, len);
cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
cfi->device_type, NULL);
goto out_unlock;
chip->state = FL_UNLOCKING;
- DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): LOCK 0x%08lx len %d\n",
- __func__, adr, len);
+ pr_debug("MTD %s(): LOCK 0x%08lx len %d\n", __func__, adr, len);
cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
cfi->device_type, NULL);
/* Refuse the operation if the we cannot look behind the chip */
if (chip->start < 0x400000) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): chip->start: %lx wanted >= 0x400000\n",
+ pr_debug( "MTD %s(): chip->start: %lx wanted >= 0x400000\n",
__func__, chip->start );
return -EIO;
}
* (oh and incidentaly the jedec spec - 3.5.3.3) the reset
* sequence is *supposed* to be 0xaa at 0x5555, 0x55 at
* 0x2aaa, 0xF0 at 0x5555 this will not affect the AMD chips
- * as they will ignore the writes and dont care what address
+ * as they will ignore the writes and don't care what address
* the F0 is written to */
if (cfi->addr_unlock1) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "reset unlock called %x %x \n",
+ pr_debug( "reset unlock called %x %x \n",
cfi->addr_unlock1,cfi->addr_unlock2);
cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL);
uint8_t uaddr;
if (!(jedec_table[index].devtypes & cfi->device_type)) {
- DEBUG(MTD_DEBUG_LEVEL1, "Rejecting potential %s with incompatible %d-bit device type\n",
+ pr_debug("Rejecting potential %s with incompatible %d-bit device type\n",
jedec_table[index].name, 4 * (1<<cfi->device_type));
return 0;
}
* there aren't.
*/
if (finfo->dev_id > 0xff) {
- DEBUG( MTD_DEBUG_LEVEL3, "%s(): ID is not 8bit\n",
+ pr_debug("%s(): ID is not 8bit\n",
__func__);
goto match_done;
}
}
/* the part size must fit in the memory window */
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n",
+ pr_debug("MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n",
__func__, base, 1 << finfo->dev_size, base + (1 << finfo->dev_size) );
if ( base + cfi_interleave(cfi) * ( 1 << finfo->dev_size ) > map->size ) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n",
+ pr_debug("MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n",
__func__, finfo->mfr_id, finfo->dev_id,
1 << finfo->dev_size );
goto match_done;
uaddr = finfo->uaddr;
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n",
+ pr_debug("MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n",
__func__, cfi->addr_unlock1, cfi->addr_unlock2 );
if ( MTD_UADDR_UNNECESSARY != uaddr && MTD_UADDR_DONT_CARE != uaddr
&& ( unlock_addrs[uaddr].addr1 / cfi->device_type != cfi->addr_unlock1 ||
unlock_addrs[uaddr].addr2 / cfi->device_type != cfi->addr_unlock2 ) ) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): 0x%.4x 0x%.4x did not match\n",
+ pr_debug("MTD %s(): 0x%.4x 0x%.4x did not match\n",
__func__,
unlock_addrs[uaddr].addr1,
unlock_addrs[uaddr].addr2);
* FIXME - write a driver that takes all of the chip info as
* module parameters, doesn't probe but forces a load.
*/
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): check ID's disappear when not in ID mode\n",
+ pr_debug("MTD %s(): check ID's disappear when not in ID mode\n",
__func__ );
jedec_reset( base, map, cfi );
mfr = jedec_read_mfr( map, base, cfi );
id = jedec_read_id( map, base, cfi );
if ( mfr == cfi->mfr && id == cfi->id ) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n"
+ pr_debug("MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n"
"You might need to manually specify JEDEC parameters.\n",
__func__, cfi->mfr, cfi->id );
goto match_done;
* Put the device back in ID mode - only need to do this if we
* were truly frobbing a real device.
*/
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): return to ID mode\n", __func__ );
+ pr_debug("MTD %s(): return to ID mode\n", __func__ );
if (cfi->addr_unlock1) {
cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL);
cfi->mfr = jedec_read_mfr(map, base, cfi);
cfi->id = jedec_read_id(map, base, cfi);
- DEBUG(MTD_DEBUG_LEVEL3,
- "Search for id:(%02x %02x) interleave(%d) type(%d)\n",
+ pr_debug("Search for id:(%02x %02x) interleave(%d) type(%d)\n",
cfi->mfr, cfi->id, cfi_interleave(cfi), cfi->device_type);
for (i = 0; i < ARRAY_SIZE(jedec_table); i++) {
if ( jedec_match( base, map, cfi, &jedec_table[i] ) ) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
+ pr_debug("MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
__func__, cfi->mfr, cfi->id,
cfi->addr_unlock1, cfi->addr_unlock2 );
if (!cfi_jedec_setup(map, cfi, i))
extra_mem_size;
parts = kzalloc(alloc_size, GFP_KERNEL);
if (!parts)
- {
- printk(KERN_ERR ERRP "out of memory\n");
return NULL;
- }
extra_mem = (unsigned char *)(parts + *num_parts);
}
/* enter this partition (offset will be calculated later if it is zero at this point) */
* the first one in the chain if a NULL mtd_id is passed in.
*/
static int parse_cmdline_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- unsigned long origin)
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
{
unsigned long offset;
int i;
under "NAND Flash Device Drivers" (currently that driver does not
support all Millennium Plus devices).
+config MTD_DOCG3
+ tristate "M-Systems Disk-On-Chip G3"
+ ---help---
+ This provides an MTD device driver for the M-Systems DiskOnChip
+ G3 devices.
+
+ The driver provides access to G3 DiskOnChip, distributed by
+ M-Systems and now Sandisk. The support is very experimental,
+ and doesn't give access to any write operations.
+
config MTD_DOCPROBE
tristate
select MTD_DOCECC
config MTD_DOCPROBE_ADDRESS
hex "Physical address of DiskOnChip" if MTD_DOCPROBE_ADVANCED
depends on MTD_DOCPROBE
- default "0x0000" if MTD_DOCPROBE_ADVANCED
- default "0" if !MTD_DOCPROBE_ADVANCED
+ default "0x0"
---help---
By default, the probe for DiskOnChip devices will look for a
DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
obj-$(CONFIG_MTD_DOC2000) += doc2000.o
obj-$(CONFIG_MTD_DOC2001) += doc2001.o
obj-$(CONFIG_MTD_DOC2001PLUS) += doc2001plus.o
+obj-$(CONFIG_MTD_DOCG3) += docg3.o
obj-$(CONFIG_MTD_DOCPROBE) += docprobe.o
obj-$(CONFIG_MTD_DOCECC) += docecc.o
obj-$(CONFIG_MTD_SLRAM) += slram.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
obj-$(CONFIG_MTD_SST25L) += sst25l.o
+
+CFLAGS_docg3.o += -I$(src)
\ No newline at end of file
void __iomem *docptr = doc->virtadr;
unsigned long timeo = jiffies + (HZ * 10);
- DEBUG(MTD_DEBUG_LEVEL3,
- "_DoC_WaitReady called for out-of-line wait\n");
+ pr_debug("_DoC_WaitReady called for out-of-line wait\n");
/* Out-of-line routine to wait for chip response */
while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) {
DoC_Delay(doc, 2);
if (time_after(jiffies, timeo)) {
- DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
+ pr_debug("_DoC_WaitReady timed out.\n");
return -EIO;
}
udelay(1);
/* Reset the chip */
if (DoC_Command(doc, NAND_CMD_RESET, CDSN_CTRL_WP)) {
- DEBUG(MTD_DEBUG_LEVEL2,
- "DoC_Command (reset) for %d,%d returned true\n",
+ pr_debug("DoC_Command (reset) for %d,%d returned true\n",
floor, chip);
return 0;
}
/* Read the NAND chip ID: 1. Send ReadID command */
if (DoC_Command(doc, NAND_CMD_READID, CDSN_CTRL_WP)) {
- DEBUG(MTD_DEBUG_LEVEL2,
- "DoC_Command (ReadID) for %d,%d returned true\n",
+ pr_debug("DoC_Command (ReadID) for %d,%d returned true\n",
floor, chip);
return 0;
}
#ifdef ECC_DEBUG
printk(KERN_ERR "DiskOnChip ECC Error: Read at %lx\n", (long)from);
#endif
- /* Read the ECC syndrom through the DiskOnChip ECC
+ /* Read the ECC syndrome through the DiskOnChip ECC
logic. These syndrome will be all ZERO when there
is no error */
for (i = 0; i < 6; i++) {
uint8_t *buf = ops->oobbuf;
size_t len = ops->len;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
ofs += ops->ooboffs;
struct DiskOnChip *this = mtd->priv;
int ret;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
mutex_lock(&this->lock);
ret = doc_write_oob_nolock(mtd, ofs + ops->ooboffs, ops->len,
{
unsigned short c = 0xffff;
- DEBUG(MTD_DEBUG_LEVEL3,
- "_DoC_WaitReady called for out-of-line wait\n");
+ pr_debug("_DoC_WaitReady called for out-of-line wait\n");
/* Out-of-line routine to wait for chip response */
while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B) && --c)
;
if (c == 0)
- DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
+ pr_debug("_DoC_WaitReady timed out.\n");
return (c == 0);
}
#ifdef ECC_DEBUG
printk("DiskOnChip ECC Error: Read at %lx\n", (long)from);
#endif
- /* Read the ECC syndrom through the DiskOnChip ECC logic.
+ /* Read the ECC syndrome through the DiskOnChip ECC logic.
These syndrome will be all ZERO when there is no error */
for (i = 0; i < 6; i++) {
syndrome[i] = ReadDOC(docptr, ECCSyndrome0 + i);
uint8_t *buf = ops->oobbuf;
size_t len = ops->len;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
ofs += ops->ooboffs;
uint8_t *buf = ops->oobbuf;
size_t len = ops->len;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
ofs += ops->ooboffs;
{
unsigned int c = 0xffff;
- DEBUG(MTD_DEBUG_LEVEL3,
- "_DoC_WaitReady called for out-of-line wait\n");
+ pr_debug("_DoC_WaitReady called for out-of-line wait\n");
/* Out-of-line routine to wait for chip response */
while (((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) && --c)
;
if (c == 0)
- DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
+ pr_debug("_DoC_WaitReady timed out.\n");
return (c == 0);
}
#ifdef ECC_DEBUG
printk("DiskOnChip ECC Error: Read at %lx\n", (long)from);
#endif
- /* Read the ECC syndrom through the DiskOnChip ECC logic.
+ /* Read the ECC syndrome through the DiskOnChip ECC logic.
These syndrome will be all ZERO when there is no error */
for (i = 0; i < 6; i++)
syndrome[i] = ReadDOC(docptr, Mplus_ECCSyndrome0 + i);
uint8_t *buf = ops->oobbuf;
size_t len = ops->len;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
ofs += ops->ooboffs;
uint8_t *buf = ops->oobbuf;
size_t len = ops->len;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
ofs += ops->ooboffs;
* ECC algorithm for M-systems disk on chip. We use the excellent Reed
* Solmon code of Phil Karn (karn@ka9q.ampr.org) available under the
* GNU GPL License. The rest is simply to convert the disk on chip
- * syndrom into a standard syndom.
+ * syndrome into a standard syndome.
*
* Author: Fabrice Bellard (fabrice.bellard@netgem.com)
* Copyright (C) 2000 Netgem S.A.
--- /dev/null
+/*
+ * Handles the M-Systems DiskOnChip G3 chip
+ *
+ * Copyright (C) 2011 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#define CREATE_TRACE_POINTS
+#include "docg3.h"
+
+/*
+ * This driver handles the DiskOnChip G3 flash memory.
+ *
+ * As no specification is available from M-Systems/Sandisk, this drivers lacks
+ * several functions available on the chip, as :
+ * - block erase
+ * - page write
+ * - IPL write
+ * - ECC fixing (lack of BCH algorith understanding)
+ * - powerdown / powerup
+ *
+ * The bus data width (8bits versus 16bits) is not handled (if_cfg flag), and
+ * the driver assumes a 16bits data bus.
+ *
+ * DocG3 relies on 2 ECC algorithms, which are handled in hardware :
+ * - a 1 byte Hamming code stored in the OOB for each page
+ * - a 7 bytes BCH code stored in the OOB for each page
+ * The BCH part is only used for check purpose, no correction is available as
+ * some information is missing. What is known is that :
+ * - BCH is in GF(2^14)
+ * - BCH is over data of 520 bytes (512 page + 7 page_info bytes
+ * + 1 hamming byte)
+ * - BCH can correct up to 4 bits (t = 4)
+ * - BCH syndroms are calculated in hardware, and checked in hardware as well
+ *
+ */
+
+static inline u8 doc_readb(struct docg3 *docg3, u16 reg)
+{
+ u8 val = readb(docg3->base + reg);
+
+ trace_docg3_io(0, 8, reg, (int)val);
+ return val;
+}
+
+static inline u16 doc_readw(struct docg3 *docg3, u16 reg)
+{
+ u16 val = readw(docg3->base + reg);
+
+ trace_docg3_io(0, 16, reg, (int)val);
+ return val;
+}
+
+static inline void doc_writeb(struct docg3 *docg3, u8 val, u16 reg)
+{
+ writeb(val, docg3->base + reg);
+ trace_docg3_io(1, 16, reg, val);
+}
+
+static inline void doc_writew(struct docg3 *docg3, u16 val, u16 reg)
+{
+ writew(val, docg3->base + reg);
+ trace_docg3_io(1, 16, reg, val);
+}
+
+static inline void doc_flash_command(struct docg3 *docg3, u8 cmd)
+{
+ doc_writeb(docg3, cmd, DOC_FLASHCOMMAND);
+}
+
+static inline void doc_flash_sequence(struct docg3 *docg3, u8 seq)
+{
+ doc_writeb(docg3, seq, DOC_FLASHSEQUENCE);
+}
+
+static inline void doc_flash_address(struct docg3 *docg3, u8 addr)
+{
+ doc_writeb(docg3, addr, DOC_FLASHADDRESS);
+}
+
+static char const *part_probes[] = { "cmdlinepart", "saftlpart", NULL };
+
+static int doc_register_readb(struct docg3 *docg3, int reg)
+{
+ u8 val;
+
+ doc_writew(docg3, reg, DOC_READADDRESS);
+ val = doc_readb(docg3, reg);
+ doc_vdbg("Read register %04x : %02x\n", reg, val);
+ return val;
+}
+
+static int doc_register_readw(struct docg3 *docg3, int reg)
+{
+ u16 val;
+
+ doc_writew(docg3, reg, DOC_READADDRESS);
+ val = doc_readw(docg3, reg);
+ doc_vdbg("Read register %04x : %04x\n", reg, val);
+ return val;
+}
+
+/**
+ * doc_delay - delay docg3 operations
+ * @docg3: the device
+ * @nbNOPs: the number of NOPs to issue
+ *
+ * As no specification is available, the right timings between chip commands are
+ * unknown. The only available piece of information are the observed nops on a
+ * working docg3 chip.
+ * Therefore, doc_delay relies on a busy loop of NOPs, instead of scheduler
+ * friendlier msleep() functions or blocking mdelay().
+ */
+static void doc_delay(struct docg3 *docg3, int nbNOPs)
+{
+ int i;
+
+ doc_dbg("NOP x %d\n", nbNOPs);
+ for (i = 0; i < nbNOPs; i++)
+ doc_writeb(docg3, 0, DOC_NOP);
+}
+
+static int is_prot_seq_error(struct docg3 *docg3)
+{
+ int ctrl;
+
+ ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+ return ctrl & (DOC_CTRL_PROTECTION_ERROR | DOC_CTRL_SEQUENCE_ERROR);
+}
+
+static int doc_is_ready(struct docg3 *docg3)
+{
+ int ctrl;
+
+ ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+ return ctrl & DOC_CTRL_FLASHREADY;
+}
+
+static int doc_wait_ready(struct docg3 *docg3)
+{
+ int maxWaitCycles = 100;
+
+ do {
+ doc_delay(docg3, 4);
+ cpu_relax();
+ } while (!doc_is_ready(docg3) && maxWaitCycles--);
+ doc_delay(docg3, 2);
+ if (maxWaitCycles > 0)
+ return 0;
+ else
+ return -EIO;
+}
+
+static int doc_reset_seq(struct docg3 *docg3)
+{
+ int ret;
+
+ doc_writeb(docg3, 0x10, DOC_FLASHCONTROL);
+ doc_flash_sequence(docg3, DOC_SEQ_RESET);
+ doc_flash_command(docg3, DOC_CMD_RESET);
+ doc_delay(docg3, 2);
+ ret = doc_wait_ready(docg3);
+
+ doc_dbg("doc_reset_seq() -> isReady=%s\n", ret ? "false" : "true");
+ return ret;
+}
+
+/**
+ * doc_read_data_area - Read data from data area
+ * @docg3: the device
+ * @buf: the buffer to fill in
+ * @len: the lenght to read
+ * @first: first time read, DOC_READADDRESS should be set
+ *
+ * Reads bytes from flash data. Handles the single byte / even bytes reads.
+ */
+static void doc_read_data_area(struct docg3 *docg3, void *buf, int len,
+ int first)
+{
+ int i, cdr, len4;
+ u16 data16, *dst16;
+ u8 data8, *dst8;
+
+ doc_dbg("doc_read_data_area(buf=%p, len=%d)\n", buf, len);
+ cdr = len & 0x3;
+ len4 = len - cdr;
+
+ if (first)
+ doc_writew(docg3, DOC_IOSPACE_DATA, DOC_READADDRESS);
+ dst16 = buf;
+ for (i = 0; i < len4; i += 2) {
+ data16 = doc_readw(docg3, DOC_IOSPACE_DATA);
+ *dst16 = data16;
+ dst16++;
+ }
+
+ if (cdr) {
+ doc_writew(docg3, DOC_IOSPACE_DATA | DOC_READADDR_ONE_BYTE,
+ DOC_READADDRESS);
+ doc_delay(docg3, 1);
+ dst8 = (u8 *)dst16;
+ for (i = 0; i < cdr; i++) {
+ data8 = doc_readb(docg3, DOC_IOSPACE_DATA);
+ *dst8 = data8;
+ dst8++;
+ }
+ }
+}
+
+/**
+ * doc_set_data_mode - Sets the flash to reliable data mode
+ * @docg3: the device
+ *
+ * The reliable data mode is a bit slower than the fast mode, but less errors
+ * occur. Entering the reliable mode cannot be done without entering the fast
+ * mode first.
+ */
+static void doc_set_reliable_mode(struct docg3 *docg3)
+{
+ doc_dbg("doc_set_reliable_mode()\n");
+ doc_flash_sequence(docg3, DOC_SEQ_SET_MODE);
+ doc_flash_command(docg3, DOC_CMD_FAST_MODE);
+ doc_flash_command(docg3, DOC_CMD_RELIABLE_MODE);
+ doc_delay(docg3, 2);
+}
+
+/**
+ * doc_set_asic_mode - Set the ASIC mode
+ * @docg3: the device
+ * @mode: the mode
+ *
+ * The ASIC can work in 3 modes :
+ * - RESET: all registers are zeroed
+ * - NORMAL: receives and handles commands
+ * - POWERDOWN: minimal poweruse, flash parts shut off
+ */
+static void doc_set_asic_mode(struct docg3 *docg3, u8 mode)
+{
+ int i;
+
+ for (i = 0; i < 12; i++)
+ doc_readb(docg3, DOC_IOSPACE_IPL);
+
+ mode |= DOC_ASICMODE_MDWREN;
+ doc_dbg("doc_set_asic_mode(%02x)\n", mode);
+ doc_writeb(docg3, mode, DOC_ASICMODE);
+ doc_writeb(docg3, ~mode, DOC_ASICMODECONFIRM);
+ doc_delay(docg3, 1);
+}
+
+/**
+ * doc_set_device_id - Sets the devices id for cascaded G3 chips
+ * @docg3: the device
+ * @id: the chip to select (amongst 0, 1, 2, 3)
+ *
+ * There can be 4 cascaded G3 chips. This function selects the one which will
+ * should be the active one.
+ */
+static void doc_set_device_id(struct docg3 *docg3, int id)
+{
+ u8 ctrl;
+
+ doc_dbg("doc_set_device_id(%d)\n", id);
+ doc_writeb(docg3, id, DOC_DEVICESELECT);
+ ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+
+ ctrl &= ~DOC_CTRL_VIOLATION;
+ ctrl |= DOC_CTRL_CE;
+ doc_writeb(docg3, ctrl, DOC_FLASHCONTROL);
+}
+
+/**
+ * doc_set_extra_page_mode - Change flash page layout
+ * @docg3: the device
+ *
+ * Normally, the flash page is split into the data (512 bytes) and the out of
+ * band data (16 bytes). For each, 4 more bytes can be accessed, where the wear
+ * leveling counters are stored. To access this last area of 4 bytes, a special
+ * mode must be input to the flash ASIC.
+ *
+ * Returns 0 if no error occured, -EIO else.
+ */
+static int doc_set_extra_page_mode(struct docg3 *docg3)
+{
+ int fctrl;
+
+ doc_dbg("doc_set_extra_page_mode()\n");
+ doc_flash_sequence(docg3, DOC_SEQ_PAGE_SIZE_532);
+ doc_flash_command(docg3, DOC_CMD_PAGE_SIZE_532);
+ doc_delay(docg3, 2);
+
+ fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+ if (fctrl & (DOC_CTRL_PROTECTION_ERROR | DOC_CTRL_SEQUENCE_ERROR))
+ return -EIO;
+ else
+ return 0;
+}
+
+/**
+ * doc_seek - Set both flash planes to the specified block, page for reading
+ * @docg3: the device
+ * @block0: the first plane block index
+ * @block1: the second plane block index
+ * @page: the page index within the block
+ * @wear: if true, read will occur on the 4 extra bytes of the wear area
+ * @ofs: offset in page to read
+ *
+ * Programs the flash even and odd planes to the specific block and page.
+ * Alternatively, programs the flash to the wear area of the specified page.
+ */
+static int doc_read_seek(struct docg3 *docg3, int block0, int block1, int page,
+ int wear, int ofs)
+{
+ int sector, ret = 0;
+
+ doc_dbg("doc_seek(blocks=(%d,%d), page=%d, ofs=%d, wear=%d)\n",
+ block0, block1, page, ofs, wear);
+
+ if (!wear && (ofs < 2 * DOC_LAYOUT_PAGE_SIZE)) {
+ doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE1);
+ doc_flash_command(docg3, DOC_CMD_READ_PLANE1);
+ doc_delay(docg3, 2);
+ } else {
+ doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE2);
+ doc_flash_command(docg3, DOC_CMD_READ_PLANE2);
+ doc_delay(docg3, 2);
+ }
+
+ doc_set_reliable_mode(docg3);
+ if (wear)
+ ret = doc_set_extra_page_mode(docg3);
+ if (ret)
+ goto out;
+
+ sector = (block0 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+ doc_flash_sequence(docg3, DOC_SEQ_READ);
+ doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+ doc_delay(docg3, 1);
+ doc_flash_address(docg3, sector & 0xff);
+ doc_flash_address(docg3, (sector >> 8) & 0xff);
+ doc_flash_address(docg3, (sector >> 16) & 0xff);
+ doc_delay(docg3, 1);
+
+ sector = (block1 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+ doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+ doc_delay(docg3, 1);
+ doc_flash_address(docg3, sector & 0xff);
+ doc_flash_address(docg3, (sector >> 8) & 0xff);
+ doc_flash_address(docg3, (sector >> 16) & 0xff);
+ doc_delay(docg3, 2);
+
+out:
+ return ret;
+}
+
+/**
+ * doc_read_page_ecc_init - Initialize hardware ECC engine
+ * @docg3: the device
+ * @len: the number of bytes covered by the ECC (BCH covered)
+ *
+ * The function does initialize the hardware ECC engine to compute the Hamming
+ * ECC (on 1 byte) and the BCH Syndroms (on 7 bytes).
+ *
+ * Return 0 if succeeded, -EIO on error
+ */
+static int doc_read_page_ecc_init(struct docg3 *docg3, int len)
+{
+ doc_writew(docg3, DOC_ECCCONF0_READ_MODE
+ | DOC_ECCCONF0_BCH_ENABLE | DOC_ECCCONF0_HAMMING_ENABLE
+ | (len & DOC_ECCCONF0_DATA_BYTES_MASK),
+ DOC_ECCCONF0);
+ doc_delay(docg3, 4);
+ doc_register_readb(docg3, DOC_FLASHCONTROL);
+ return doc_wait_ready(docg3);
+}
+
+/**
+ * doc_read_page_prepare - Prepares reading data from a flash page
+ * @docg3: the device
+ * @block0: the first plane block index on flash memory
+ * @block1: the second plane block index on flash memory
+ * @page: the page index in the block
+ * @offset: the offset in the page (must be a multiple of 4)
+ *
+ * Prepares the page to be read in the flash memory :
+ * - tell ASIC to map the flash pages
+ * - tell ASIC to be in read mode
+ *
+ * After a call to this method, a call to doc_read_page_finish is mandatory,
+ * to end the read cycle of the flash.
+ *
+ * Read data from a flash page. The length to be read must be between 0 and
+ * (page_size + oob_size + wear_size), ie. 532, and a multiple of 4 (because
+ * the extra bytes reading is not implemented).
+ *
+ * As pages are grouped by 2 (in 2 planes), reading from a page must be done
+ * in two steps:
+ * - one read of 512 bytes at offset 0
+ * - one read of 512 bytes at offset 512 + 16
+ *
+ * Returns 0 if successful, -EIO if a read error occured.
+ */
+static int doc_read_page_prepare(struct docg3 *docg3, int block0, int block1,
+ int page, int offset)
+{
+ int wear_area = 0, ret = 0;
+
+ doc_dbg("doc_read_page_prepare(blocks=(%d,%d), page=%d, ofsInPage=%d)\n",
+ block0, block1, page, offset);
+ if (offset >= DOC_LAYOUT_WEAR_OFFSET)
+ wear_area = 1;
+ if (!wear_area && offset > (DOC_LAYOUT_PAGE_OOB_SIZE * 2))
+ return -EINVAL;
+
+ doc_set_device_id(docg3, docg3->device_id);
+ ret = doc_reset_seq(docg3);
+ if (ret)
+ goto err;
+
+ /* Program the flash address block and page */
+ ret = doc_read_seek(docg3, block0, block1, page, wear_area, offset);
+ if (ret)
+ goto err;
+
+ doc_flash_command(docg3, DOC_CMD_READ_ALL_PLANES);
+ doc_delay(docg3, 2);
+ doc_wait_ready(docg3);
+
+ doc_flash_command(docg3, DOC_CMD_SET_ADDR_READ);
+ doc_delay(docg3, 1);
+ if (offset >= DOC_LAYOUT_PAGE_SIZE * 2)
+ offset -= 2 * DOC_LAYOUT_PAGE_SIZE;
+ doc_flash_address(docg3, offset >> 2);
+ doc_delay(docg3, 1);
+ doc_wait_ready(docg3);
+
+ doc_flash_command(docg3, DOC_CMD_READ_FLASH);
+
+ return 0;
+err:
+ doc_writeb(docg3, 0, DOC_DATAEND);
+ doc_delay(docg3, 2);
+ return -EIO;
+}
+
+/**
+ * doc_read_page_getbytes - Reads bytes from a prepared page
+ * @docg3: the device
+ * @len: the number of bytes to be read (must be a multiple of 4)
+ * @buf: the buffer to be filled in
+ * @first: 1 if first time read, DOC_READADDRESS should be set
+ *
+ */
+static int doc_read_page_getbytes(struct docg3 *docg3, int len, u_char *buf,
+ int first)
+{
+ doc_read_data_area(docg3, buf, len, first);
+ doc_delay(docg3, 2);
+ return len;
+}
+
+/**
+ * doc_get_hw_bch_syndroms - Get hardware calculated BCH syndroms
+ * @docg3: the device
+ * @syns: the array of 7 integers where the syndroms will be stored
+ */
+static void doc_get_hw_bch_syndroms(struct docg3 *docg3, int *syns)
+{
+ int i;
+
+ for (i = 0; i < DOC_ECC_BCH_SIZE; i++)
+ syns[i] = doc_register_readb(docg3, DOC_BCH_SYNDROM(i));
+}
+
+/**
+ * doc_read_page_finish - Ends reading of a flash page
+ * @docg3: the device
+ *
+ * As a side effect, resets the chip selector to 0. This ensures that after each
+ * read operation, the floor 0 is selected. Therefore, if the systems halts, the
+ * reboot will boot on floor 0, where the IPL is.
+ */
+static void doc_read_page_finish(struct docg3 *docg3)
+{
+ doc_writeb(docg3, 0, DOC_DATAEND);
+ doc_delay(docg3, 2);
+ doc_set_device_id(docg3, 0);
+}
+
+/**
+ * calc_block_sector - Calculate blocks, pages and ofs.
+
+ * @from: offset in flash
+ * @block0: first plane block index calculated
+ * @block1: second plane block index calculated
+ * @page: page calculated
+ * @ofs: offset in page
+ */
+static void calc_block_sector(loff_t from, int *block0, int *block1, int *page,
+ int *ofs)
+{
+ uint sector;
+
+ sector = from / DOC_LAYOUT_PAGE_SIZE;
+ *block0 = sector / (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_NBPLANES)
+ * DOC_LAYOUT_NBPLANES;
+ *block1 = *block0 + 1;
+ *page = sector % (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_NBPLANES);
+ *page /= DOC_LAYOUT_NBPLANES;
+ if (sector % 2)
+ *ofs = DOC_LAYOUT_PAGE_OOB_SIZE;
+ else
+ *ofs = 0;
+}
+
+/**
+ * doc_read - Read bytes from flash
+ * @mtd: the device
+ * @from: the offset from first block and first page, in bytes, aligned on page
+ * size
+ * @len: the number of bytes to read (must be a multiple of 4)
+ * @retlen: the number of bytes actually read
+ * @buf: the filled in buffer
+ *
+ * Reads flash memory pages. This function does not read the OOB chunk, but only
+ * the page data.
+ *
+ * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured
+ */
+static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int block0, block1, page, readlen, ret, ofs = 0;
+ int syn[DOC_ECC_BCH_SIZE], eccconf1;
+ u8 oob[DOC_LAYOUT_OOB_SIZE];
+
+ ret = -EINVAL;
+ doc_dbg("doc_read(from=%lld, len=%zu, buf=%p)\n", from, len, buf);
+ if (from % DOC_LAYOUT_PAGE_SIZE)
+ goto err;
+ if (len % 4)
+ goto err;
+ calc_block_sector(from, &block0, &block1, &page, &ofs);
+ if (block1 > docg3->max_block)
+ goto err;
+
+ *retlen = 0;
+ ret = 0;
+ readlen = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE);
+ while (!ret && len > 0) {
+ readlen = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE);
+ ret = doc_read_page_prepare(docg3, block0, block1, page, ofs);
+ if (ret < 0)
+ goto err;
+ ret = doc_read_page_ecc_init(docg3, DOC_ECC_BCH_COVERED_BYTES);
+ if (ret < 0)
+ goto err_in_read;
+ ret = doc_read_page_getbytes(docg3, readlen, buf, 1);
+ if (ret < readlen)
+ goto err_in_read;
+ ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE,
+ oob, 0);
+ if (ret < DOC_LAYOUT_OOB_SIZE)
+ goto err_in_read;
+
+ *retlen += readlen;
+ buf += readlen;
+ len -= readlen;
+
+ ofs ^= DOC_LAYOUT_PAGE_OOB_SIZE;
+ if (ofs == 0)
+ page += 2;
+ if (page > DOC_ADDR_PAGE_MASK) {
+ page = 0;
+ block0 += 2;
+ block1 += 2;
+ }
+
+ /*
+ * There should be a BCH bitstream fixing algorithm here ...
+ * By now, a page read failure is triggered by BCH error
+ */
+ doc_get_hw_bch_syndroms(docg3, syn);
+ eccconf1 = doc_register_readb(docg3, DOC_ECCCONF1);
+
+ doc_dbg("OOB - INFO: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ oob[0], oob[1], oob[2], oob[3], oob[4],
+ oob[5], oob[6]);
+ doc_dbg("OOB - HAMMING: %02x\n", oob[7]);
+ doc_dbg("OOB - BCH_ECC: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ oob[8], oob[9], oob[10], oob[11], oob[12],
+ oob[13], oob[14]);
+ doc_dbg("OOB - UNUSED: %02x\n", oob[15]);
+ doc_dbg("ECC checks: ECCConf1=%x\n", eccconf1);
+ doc_dbg("ECC BCH syndrom: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ syn[0], syn[1], syn[2], syn[3], syn[4], syn[5], syn[6]);
+
+ ret = -EBADMSG;
+ if (block0 >= DOC_LAYOUT_BLOCK_FIRST_DATA) {
+ if (eccconf1 & DOC_ECCCONF1_BCH_SYNDROM_ERR)
+ goto err_in_read;
+ if (is_prot_seq_error(docg3))
+ goto err_in_read;
+ }
+ doc_read_page_finish(docg3);
+ }
+
+ return 0;
+err_in_read:
+ doc_read_page_finish(docg3);
+err:
+ return ret;
+}
+
+/**
+ * doc_read_oob - Read out of band bytes from flash
+ * @mtd: the device
+ * @from: the offset from first block and first page, in bytes, aligned on page
+ * size
+ * @ops: the mtd oob structure
+ *
+ * Reads flash memory OOB area of pages.
+ *
+ * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured
+ */
+static int doc_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int block0, block1, page, ofs, ret;
+ u8 *buf = ops->oobbuf;
+ size_t len = ops->ooblen;
+
+ doc_dbg("doc_read_oob(from=%lld, buf=%p, len=%zu)\n", from, buf, len);
+ if (len != DOC_LAYOUT_OOB_SIZE)
+ return -EINVAL;
+
+ switch (ops->mode) {
+ case MTD_OPS_PLACE_OOB:
+ buf += ops->ooboffs;
+ break;
+ default:
+ break;
+ }
+
+ calc_block_sector(from, &block0, &block1, &page, &ofs);
+ if (block1 > docg3->max_block)
+ return -EINVAL;
+
+ ret = doc_read_page_prepare(docg3, block0, block1, page,
+ ofs + DOC_LAYOUT_PAGE_SIZE);
+ if (!ret)
+ ret = doc_read_page_ecc_init(docg3, DOC_LAYOUT_OOB_SIZE);
+ if (!ret)
+ ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE,
+ buf, 1);
+ doc_read_page_finish(docg3);
+
+ if (ret > 0)
+ ops->oobretlen = ret;
+ else
+ ops->oobretlen = 0;
+ return (ret > 0) ? 0 : ret;
+}
+
+static int doc_reload_bbt(struct docg3 *docg3)
+{
+ int block = DOC_LAYOUT_BLOCK_BBT;
+ int ret = 0, nbpages, page;
+ u_char *buf = docg3->bbt;
+
+ nbpages = DIV_ROUND_UP(docg3->max_block + 1, 8 * DOC_LAYOUT_PAGE_SIZE);
+ for (page = 0; !ret && (page < nbpages); page++) {
+ ret = doc_read_page_prepare(docg3, block, block + 1,
+ page + DOC_LAYOUT_PAGE_BBT, 0);
+ if (!ret)
+ ret = doc_read_page_ecc_init(docg3,
+ DOC_LAYOUT_PAGE_SIZE);
+ if (!ret)
+ doc_read_page_getbytes(docg3, DOC_LAYOUT_PAGE_SIZE,
+ buf, 1);
+ buf += DOC_LAYOUT_PAGE_SIZE;
+ }
+ doc_read_page_finish(docg3);
+ return ret;
+}
+
+/**
+ * doc_block_isbad - Checks whether a block is good or not
+ * @mtd: the device
+ * @from: the offset to find the correct block
+ *
+ * Returns 1 if block is bad, 0 if block is good
+ */
+static int doc_block_isbad(struct mtd_info *mtd, loff_t from)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int block0, block1, page, ofs, is_good;
+
+ calc_block_sector(from, &block0, &block1, &page, &ofs);
+ doc_dbg("doc_block_isbad(from=%lld) => block=(%d,%d), page=%d, ofs=%d\n",
+ from, block0, block1, page, ofs);
+
+ if (block0 < DOC_LAYOUT_BLOCK_FIRST_DATA)
+ return 0;
+ if (block1 > docg3->max_block)
+ return -EINVAL;
+
+ is_good = docg3->bbt[block0 >> 3] & (1 << (block0 & 0x7));
+ return !is_good;
+}
+
+/**
+ * doc_get_erase_count - Get block erase count
+ * @docg3: the device
+ * @from: the offset in which the block is.
+ *
+ * Get the number of times a block was erased. The number is the maximum of
+ * erase times between first and second plane (which should be equal normally).
+ *
+ * Returns The number of erases, or -EINVAL or -EIO on error.
+ */
+static int doc_get_erase_count(struct docg3 *docg3, loff_t from)
+{
+ u8 buf[DOC_LAYOUT_WEAR_SIZE];
+ int ret, plane1_erase_count, plane2_erase_count;
+ int block0, block1, page, ofs;
+
+ doc_dbg("doc_get_erase_count(from=%lld, buf=%p)\n", from, buf);
+ if (from % DOC_LAYOUT_PAGE_SIZE)
+ return -EINVAL;
+ calc_block_sector(from, &block0, &block1, &page, &ofs);
+ if (block1 > docg3->max_block)
+ return -EINVAL;
+
+ ret = doc_reset_seq(docg3);
+ if (!ret)
+ ret = doc_read_page_prepare(docg3, block0, block1, page,
+ ofs + DOC_LAYOUT_WEAR_OFFSET);
+ if (!ret)
+ ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_WEAR_SIZE,
+ buf, 1);
+ doc_read_page_finish(docg3);
+
+ if (ret || (buf[0] != DOC_ERASE_MARK) || (buf[2] != DOC_ERASE_MARK))
+ return -EIO;
+ plane1_erase_count = (u8)(~buf[1]) | ((u8)(~buf[4]) << 8)
+ | ((u8)(~buf[5]) << 16);
+ plane2_erase_count = (u8)(~buf[3]) | ((u8)(~buf[6]) << 8)
+ | ((u8)(~buf[7]) << 16);
+
+ return max(plane1_erase_count, plane2_erase_count);
+}
+
+/*
+ * Debug sysfs entries
+ */
+static int dbg_flashctrl_show(struct seq_file *s, void *p)
+{
+ struct docg3 *docg3 = (struct docg3 *)s->private;
+
+ int pos = 0;
+ u8 fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+
+ pos += seq_printf(s,
+ "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n",
+ fctrl,
+ fctrl & DOC_CTRL_VIOLATION ? "protocol violation" : "-",
+ fctrl & DOC_CTRL_CE ? "active" : "inactive",
+ fctrl & DOC_CTRL_PROTECTION_ERROR ? "protection error" : "-",
+ fctrl & DOC_CTRL_SEQUENCE_ERROR ? "sequence error" : "-",
+ fctrl & DOC_CTRL_FLASHREADY ? "ready" : "not ready");
+ return pos;
+}
+DEBUGFS_RO_ATTR(flashcontrol, dbg_flashctrl_show);
+
+static int dbg_asicmode_show(struct seq_file *s, void *p)
+{
+ struct docg3 *docg3 = (struct docg3 *)s->private;
+
+ int pos = 0;
+ int pctrl = doc_register_readb(docg3, DOC_ASICMODE);
+ int mode = pctrl & 0x03;
+
+ pos += seq_printf(s,
+ "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (",
+ pctrl,
+ pctrl & DOC_ASICMODE_RAM_WE ? 1 : 0,
+ pctrl & DOC_ASICMODE_RSTIN_RESET ? 1 : 0,
+ pctrl & DOC_ASICMODE_BDETCT_RESET ? 1 : 0,
+ pctrl & DOC_ASICMODE_MDWREN ? 1 : 0,
+ pctrl & DOC_ASICMODE_POWERDOWN ? 1 : 0,
+ mode >> 1, mode & 0x1);
+
+ switch (mode) {
+ case DOC_ASICMODE_RESET:
+ pos += seq_printf(s, "reset");
+ break;
+ case DOC_ASICMODE_NORMAL:
+ pos += seq_printf(s, "normal");
+ break;
+ case DOC_ASICMODE_POWERDOWN:
+ pos += seq_printf(s, "powerdown");
+ break;
+ }
+ pos += seq_printf(s, ")\n");
+ return pos;
+}
+DEBUGFS_RO_ATTR(asic_mode, dbg_asicmode_show);
+
+static int dbg_device_id_show(struct seq_file *s, void *p)
+{
+ struct docg3 *docg3 = (struct docg3 *)s->private;
+ int pos = 0;
+ int id = doc_register_readb(docg3, DOC_DEVICESELECT);
+
+ pos += seq_printf(s, "DeviceId = %d\n", id);
+ return pos;
+}
+DEBUGFS_RO_ATTR(device_id, dbg_device_id_show);
+
+static int dbg_protection_show(struct seq_file *s, void *p)
+{
+ struct docg3 *docg3 = (struct docg3 *)s->private;
+ int pos = 0;
+ int protect = doc_register_readb(docg3, DOC_PROTECTION);
+ int dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS);
+ int dps0_low = doc_register_readb(docg3, DOC_DPS0_ADDRLOW);
+ int dps0_high = doc_register_readb(docg3, DOC_DPS0_ADDRHIGH);
+ int dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS);
+ int dps1_low = doc_register_readb(docg3, DOC_DPS1_ADDRLOW);
+ int dps1_high = doc_register_readb(docg3, DOC_DPS1_ADDRHIGH);
+
+ pos += seq_printf(s, "Protection = 0x%02x (",
+ protect);
+ if (protect & DOC_PROTECT_FOUNDRY_OTP_LOCK)
+ pos += seq_printf(s, "FOUNDRY_OTP_LOCK,");
+ if (protect & DOC_PROTECT_CUSTOMER_OTP_LOCK)
+ pos += seq_printf(s, "CUSTOMER_OTP_LOCK,");
+ if (protect & DOC_PROTECT_LOCK_INPUT)
+ pos += seq_printf(s, "LOCK_INPUT,");
+ if (protect & DOC_PROTECT_STICKY_LOCK)
+ pos += seq_printf(s, "STICKY_LOCK,");
+ if (protect & DOC_PROTECT_PROTECTION_ENABLED)
+ pos += seq_printf(s, "PROTECTION ON,");
+ if (protect & DOC_PROTECT_IPL_DOWNLOAD_LOCK)
+ pos += seq_printf(s, "IPL_DOWNLOAD_LOCK,");
+ if (protect & DOC_PROTECT_PROTECTION_ERROR)
+ pos += seq_printf(s, "PROTECT_ERR,");
+ else
+ pos += seq_printf(s, "NO_PROTECT_ERR");
+ pos += seq_printf(s, ")\n");
+
+ pos += seq_printf(s, "DPS0 = 0x%02x : "
+ "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, "
+ "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
+ dps0, dps0_low, dps0_high,
+ !!(dps0 & DOC_DPS_OTP_PROTECTED),
+ !!(dps0 & DOC_DPS_READ_PROTECTED),
+ !!(dps0 & DOC_DPS_WRITE_PROTECTED),
+ !!(dps0 & DOC_DPS_HW_LOCK_ENABLED),
+ !!(dps0 & DOC_DPS_KEY_OK));
+ pos += seq_printf(s, "DPS1 = 0x%02x : "
+ "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, "
+ "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
+ dps1, dps1_low, dps1_high,
+ !!(dps1 & DOC_DPS_OTP_PROTECTED),
+ !!(dps1 & DOC_DPS_READ_PROTECTED),
+ !!(dps1 & DOC_DPS_WRITE_PROTECTED),
+ !!(dps1 & DOC_DPS_HW_LOCK_ENABLED),
+ !!(dps1 & DOC_DPS_KEY_OK));
+ return pos;
+}
+DEBUGFS_RO_ATTR(protection, dbg_protection_show);
+
+static int __init doc_dbg_register(struct docg3 *docg3)
+{
+ struct dentry *root, *entry;
+
+ root = debugfs_create_dir("docg3", NULL);
+ if (!root)
+ return -ENOMEM;
+
+ entry = debugfs_create_file("flashcontrol", S_IRUSR, root, docg3,
+ &flashcontrol_fops);
+ if (entry)
+ entry = debugfs_create_file("asic_mode", S_IRUSR, root,
+ docg3, &asic_mode_fops);
+ if (entry)
+ entry = debugfs_create_file("device_id", S_IRUSR, root,
+ docg3, &device_id_fops);
+ if (entry)
+ entry = debugfs_create_file("protection", S_IRUSR, root,
+ docg3, &protection_fops);
+ if (entry) {
+ docg3->debugfs_root = root;
+ return 0;
+ } else {
+ debugfs_remove_recursive(root);
+ return -ENOMEM;
+ }
+}
+
+static void __exit doc_dbg_unregister(struct docg3 *docg3)
+{
+ debugfs_remove_recursive(docg3->debugfs_root);
+}
+
+/**
+ * doc_set_driver_info - Fill the mtd_info structure and docg3 structure
+ * @chip_id: The chip ID of the supported chip
+ * @mtd: The structure to fill
+ */
+static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int cfg;
+
+ cfg = doc_register_readb(docg3, DOC_CONFIGURATION);
+ docg3->if_cfg = (cfg & DOC_CONF_IF_CFG ? 1 : 0);
+
+ switch (chip_id) {
+ case DOC_CHIPID_G3:
+ mtd->name = "DiskOnChip G3";
+ docg3->max_block = 2047;
+ break;
+ }
+ mtd->type = MTD_NANDFLASH;
+ /*
+ * Once write methods are added, the correct flags will be set.
+ * mtd->flags = MTD_CAP_NANDFLASH;
+ */
+ mtd->flags = MTD_CAP_ROM;
+ mtd->size = (docg3->max_block + 1) * DOC_LAYOUT_BLOCK_SIZE;
+ mtd->erasesize = DOC_LAYOUT_BLOCK_SIZE * DOC_LAYOUT_NBPLANES;
+ mtd->writesize = DOC_LAYOUT_PAGE_SIZE;
+ mtd->oobsize = DOC_LAYOUT_OOB_SIZE;
+ mtd->owner = THIS_MODULE;
+ mtd->erase = NULL;
+ mtd->point = NULL;
+ mtd->unpoint = NULL;
+ mtd->read = doc_read;
+ mtd->write = NULL;
+ mtd->read_oob = doc_read_oob;
+ mtd->write_oob = NULL;
+ mtd->sync = NULL;
+ mtd->block_isbad = doc_block_isbad;
+}
+
+/**
+ * doc_probe - Probe the IO space for a DiskOnChip G3 chip
+ * @pdev: platform device
+ *
+ * Probes for a G3 chip at the specified IO space in the platform data
+ * ressources.
+ *
+ * Returns 0 on success, -ENOMEM, -ENXIO on error
+ */
+static int __init docg3_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct docg3 *docg3;
+ struct mtd_info *mtd;
+ struct resource *ress;
+ int ret, bbt_nbpages;
+ u16 chip_id, chip_id_inv;
+
+ ret = -ENOMEM;
+ docg3 = kzalloc(sizeof(struct docg3), GFP_KERNEL);
+ if (!docg3)
+ goto nomem1;
+ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+ if (!mtd)
+ goto nomem2;
+ mtd->priv = docg3;
+
+ ret = -ENXIO;
+ ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!ress) {
+ dev_err(dev, "No I/O memory resource defined\n");
+ goto noress;
+ }
+ docg3->base = ioremap(ress->start, DOC_IOSPACE_SIZE);
+
+ docg3->dev = &pdev->dev;
+ docg3->device_id = 0;
+ doc_set_device_id(docg3, docg3->device_id);
+ doc_set_asic_mode(docg3, DOC_ASICMODE_RESET);
+ doc_set_asic_mode(docg3, DOC_ASICMODE_NORMAL);
+
+ chip_id = doc_register_readw(docg3, DOC_CHIPID);
+ chip_id_inv = doc_register_readw(docg3, DOC_CHIPID_INV);
+
+ ret = -ENODEV;
+ if (chip_id != (u16)(~chip_id_inv)) {
+ doc_info("No device found at IO addr %p\n",
+ (void *)ress->start);
+ goto nochipfound;
+ }
+
+ switch (chip_id) {
+ case DOC_CHIPID_G3:
+ doc_info("Found a G3 DiskOnChip at addr %p\n",
+ (void *)ress->start);
+ break;
+ default:
+ doc_err("Chip id %04x is not a DiskOnChip G3 chip\n", chip_id);
+ goto nochipfound;
+ }
+
+ doc_set_driver_info(chip_id, mtd);
+ platform_set_drvdata(pdev, mtd);
+
+ ret = -ENOMEM;
+ bbt_nbpages = DIV_ROUND_UP(docg3->max_block + 1,
+ 8 * DOC_LAYOUT_PAGE_SIZE);
+ docg3->bbt = kzalloc(bbt_nbpages * DOC_LAYOUT_PAGE_SIZE, GFP_KERNEL);
+ if (!docg3->bbt)
+ goto nochipfound;
+ doc_reload_bbt(docg3);
+
+ ret = mtd_device_parse_register(mtd, part_probes,
+ NULL, NULL, 0);
+ if (ret)
+ goto register_error;
+
+ doc_dbg_register(docg3);
+ return 0;
+
+register_error:
+ kfree(docg3->bbt);
+nochipfound:
+ iounmap(docg3->base);
+noress:
+ kfree(mtd);
+nomem2:
+ kfree(docg3);
+nomem1:
+ return ret;
+}
+
+/**
+ * docg3_release - Release the driver
+ * @pdev: the platform device
+ *
+ * Returns 0
+ */
+static int __exit docg3_release(struct platform_device *pdev)
+{
+ struct mtd_info *mtd = platform_get_drvdata(pdev);
+ struct docg3 *docg3 = mtd->priv;
+
+ doc_dbg_unregister(docg3);
+ mtd_device_unregister(mtd);
+ iounmap(docg3->base);
+ kfree(docg3->bbt);
+ kfree(docg3);
+ kfree(mtd);
+ return 0;
+}
+
+static struct platform_driver g3_driver = {
+ .driver = {
+ .name = "docg3",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(docg3_release),
+};
+
+static int __init docg3_init(void)
+{
+ return platform_driver_probe(&g3_driver, docg3_probe);
+}
+module_init(docg3_init);
+
+
+static void __exit docg3_exit(void)
+{
+ platform_driver_unregister(&g3_driver);
+}
+module_exit(docg3_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
+MODULE_DESCRIPTION("MTD driver for DiskOnChip G3");
--- /dev/null
+/*
+ * Handles the M-Systems DiskOnChip G3 chip
+ *
+ * Copyright (C) 2011 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _MTD_DOCG3_H
+#define _MTD_DOCG3_H
+
+/*
+ * Flash memory areas :
+ * - 0x0000 .. 0x07ff : IPL
+ * - 0x0800 .. 0x0fff : Data area
+ * - 0x1000 .. 0x17ff : Registers
+ * - 0x1800 .. 0x1fff : Unknown
+ */
+#define DOC_IOSPACE_IPL 0x0000
+#define DOC_IOSPACE_DATA 0x0800
+#define DOC_IOSPACE_SIZE 0x2000
+
+/*
+ * DOC G3 layout and adressing scheme
+ * A page address for the block "b", plane "P" and page "p":
+ * address = [bbbb bPpp pppp]
+ */
+
+#define DOC_ADDR_PAGE_MASK 0x3f
+#define DOC_ADDR_BLOCK_SHIFT 6
+#define DOC_LAYOUT_NBPLANES 2
+#define DOC_LAYOUT_PAGES_PER_BLOCK 64
+#define DOC_LAYOUT_PAGE_SIZE 512
+#define DOC_LAYOUT_OOB_SIZE 16
+#define DOC_LAYOUT_WEAR_SIZE 8
+#define DOC_LAYOUT_PAGE_OOB_SIZE \
+ (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_SIZE)
+#define DOC_LAYOUT_WEAR_OFFSET (DOC_LAYOUT_PAGE_OOB_SIZE * 2)
+#define DOC_LAYOUT_BLOCK_SIZE \
+ (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE)
+#define DOC_ECC_BCH_SIZE 7
+#define DOC_ECC_BCH_COVERED_BYTES \
+ (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ + \
+ DOC_LAYOUT_OOB_HAMMING_SZ + DOC_LAYOUT_OOB_BCH_SZ)
+
+/*
+ * Blocks distribution
+ */
+#define DOC_LAYOUT_BLOCK_BBT 0
+#define DOC_LAYOUT_BLOCK_OTP 0
+#define DOC_LAYOUT_BLOCK_FIRST_DATA 6
+
+#define DOC_LAYOUT_PAGE_BBT 4
+
+/*
+ * Extra page OOB (16 bytes wide) layout
+ */
+#define DOC_LAYOUT_OOB_PAGEINFO_OFS 0
+#define DOC_LAYOUT_OOB_HAMMING_OFS 7
+#define DOC_LAYOUT_OOB_BCH_OFS 8
+#define DOC_LAYOUT_OOB_UNUSED_OFS 15
+#define DOC_LAYOUT_OOB_PAGEINFO_SZ 7
+#define DOC_LAYOUT_OOB_HAMMING_SZ 1
+#define DOC_LAYOUT_OOB_BCH_SZ 7
+#define DOC_LAYOUT_OOB_UNUSED_SZ 1
+
+
+#define DOC_CHIPID_G3 0x200
+#define DOC_ERASE_MARK 0xaa
+/*
+ * Flash registers
+ */
+#define DOC_CHIPID 0x1000
+#define DOC_TEST 0x1004
+#define DOC_BUSLOCK 0x1006
+#define DOC_ENDIANCONTROL 0x1008
+#define DOC_DEVICESELECT 0x100a
+#define DOC_ASICMODE 0x100c
+#define DOC_CONFIGURATION 0x100e
+#define DOC_INTERRUPTCONTROL 0x1010
+#define DOC_READADDRESS 0x101a
+#define DOC_DATAEND 0x101e
+#define DOC_INTERRUPTSTATUS 0x1020
+
+#define DOC_FLASHSEQUENCE 0x1032
+#define DOC_FLASHCOMMAND 0x1034
+#define DOC_FLASHADDRESS 0x1036
+#define DOC_FLASHCONTROL 0x1038
+#define DOC_NOP 0x103e
+
+#define DOC_ECCCONF0 0x1040
+#define DOC_ECCCONF1 0x1042
+#define DOC_ECCPRESET 0x1044
+#define DOC_HAMMINGPARITY 0x1046
+#define DOC_BCH_SYNDROM(idx) (0x1048 + (idx << 1))
+
+#define DOC_PROTECTION 0x1056
+#define DOC_DPS0_ADDRLOW 0x1060
+#define DOC_DPS0_ADDRHIGH 0x1062
+#define DOC_DPS1_ADDRLOW 0x1064
+#define DOC_DPS1_ADDRHIGH 0x1066
+#define DOC_DPS0_STATUS 0x106c
+#define DOC_DPS1_STATUS 0x106e
+
+#define DOC_ASICMODECONFIRM 0x1072
+#define DOC_CHIPID_INV 0x1074
+
+/*
+ * Flash sequences
+ * A sequence is preset before one or more commands are input to the chip.
+ */
+#define DOC_SEQ_RESET 0x00
+#define DOC_SEQ_PAGE_SIZE_532 0x03
+#define DOC_SEQ_SET_MODE 0x09
+#define DOC_SEQ_READ 0x12
+#define DOC_SEQ_SET_PLANE1 0x0e
+#define DOC_SEQ_SET_PLANE2 0x10
+#define DOC_SEQ_PAGE_SETUP 0x1d
+
+/*
+ * Flash commands
+ */
+#define DOC_CMD_READ_PLANE1 0x00
+#define DOC_CMD_SET_ADDR_READ 0x05
+#define DOC_CMD_READ_ALL_PLANES 0x30
+#define DOC_CMD_READ_PLANE2 0x50
+#define DOC_CMD_READ_FLASH 0xe0
+#define DOC_CMD_PAGE_SIZE_532 0x3c
+
+#define DOC_CMD_PROG_BLOCK_ADDR 0x60
+#define DOC_CMD_PROG_CYCLE1 0x80
+#define DOC_CMD_PROG_CYCLE2 0x10
+#define DOC_CMD_ERASECYCLE2 0xd0
+
+#define DOC_CMD_RELIABLE_MODE 0x22
+#define DOC_CMD_FAST_MODE 0xa2
+
+#define DOC_CMD_RESET 0xff
+
+/*
+ * Flash register : DOC_FLASHCONTROL
+ */
+#define DOC_CTRL_VIOLATION 0x20
+#define DOC_CTRL_CE 0x10
+#define DOC_CTRL_UNKNOWN_BITS 0x08
+#define DOC_CTRL_PROTECTION_ERROR 0x04
+#define DOC_CTRL_SEQUENCE_ERROR 0x02
+#define DOC_CTRL_FLASHREADY 0x01
+
+/*
+ * Flash register : DOC_ASICMODE
+ */
+#define DOC_ASICMODE_RESET 0x00
+#define DOC_ASICMODE_NORMAL 0x01
+#define DOC_ASICMODE_POWERDOWN 0x02
+#define DOC_ASICMODE_MDWREN 0x04
+#define DOC_ASICMODE_BDETCT_RESET 0x08
+#define DOC_ASICMODE_RSTIN_RESET 0x10
+#define DOC_ASICMODE_RAM_WE 0x20
+
+/*
+ * Flash register : DOC_ECCCONF0
+ */
+#define DOC_ECCCONF0_READ_MODE 0x8000
+#define DOC_ECCCONF0_AUTO_ECC_ENABLE 0x4000
+#define DOC_ECCCONF0_HAMMING_ENABLE 0x1000
+#define DOC_ECCCONF0_BCH_ENABLE 0x0800
+#define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff
+
+/*
+ * Flash register : DOC_ECCCONF1
+ */
+#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80
+#define DOC_ECCCONF1_UNKOWN1 0x40
+#define DOC_ECCCONF1_UNKOWN2 0x20
+#define DOC_ECCCONF1_UNKOWN3 0x10
+#define DOC_ECCCONF1_HAMMING_BITS_MASK 0x0f
+
+/*
+ * Flash register : DOC_PROTECTION
+ */
+#define DOC_PROTECT_FOUNDRY_OTP_LOCK 0x01
+#define DOC_PROTECT_CUSTOMER_OTP_LOCK 0x02
+#define DOC_PROTECT_LOCK_INPUT 0x04
+#define DOC_PROTECT_STICKY_LOCK 0x08
+#define DOC_PROTECT_PROTECTION_ENABLED 0x10
+#define DOC_PROTECT_IPL_DOWNLOAD_LOCK 0x20
+#define DOC_PROTECT_PROTECTION_ERROR 0x80
+
+/*
+ * Flash register : DOC_DPS0_STATUS and DOC_DPS1_STATUS
+ */
+#define DOC_DPS_OTP_PROTECTED 0x01
+#define DOC_DPS_READ_PROTECTED 0x02
+#define DOC_DPS_WRITE_PROTECTED 0x04
+#define DOC_DPS_HW_LOCK_ENABLED 0x08
+#define DOC_DPS_KEY_OK 0x80
+
+/*
+ * Flash register : DOC_CONFIGURATION
+ */
+#define DOC_CONF_IF_CFG 0x80
+#define DOC_CONF_MAX_ID_MASK 0x30
+#define DOC_CONF_VCCQ_3V 0x01
+
+/*
+ * Flash register : DOC_READADDRESS
+ */
+#define DOC_READADDR_INC 0x8000
+#define DOC_READADDR_ONE_BYTE 0x4000
+#define DOC_READADDR_ADDR_MASK 0x1fff
+
+/**
+ * struct docg3 - DiskOnChip driver private data
+ * @dev: the device currently under control
+ * @base: mapped IO space
+ * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3)
+ * @if_cfg: if true, reads are on 16bits, else reads are on 8bits
+ * @bbt: bad block table cache
+ * @debugfs_root: debugfs root node
+ */
+struct docg3 {
+ struct device *dev;
+ void __iomem *base;
+ unsigned int device_id:4;
+ unsigned int if_cfg:1;
+ int max_block;
+ u8 *bbt;
+ struct dentry *debugfs_root;
+};
+
+#define doc_err(fmt, arg...) dev_err(docg3->dev, (fmt), ## arg)
+#define doc_info(fmt, arg...) dev_info(docg3->dev, (fmt), ## arg)
+#define doc_dbg(fmt, arg...) dev_dbg(docg3->dev, (fmt), ## arg)
+#define doc_vdbg(fmt, arg...) dev_vdbg(docg3->dev, (fmt), ## arg)
+
+#define DEBUGFS_RO_ATTR(name, show_fct) \
+ static int name##_open(struct inode *inode, struct file *file) \
+ { return single_open(file, show_fct, inode->i_private); } \
+ static const struct file_operations name##_fops = { \
+ .owner = THIS_MODULE, \
+ .open = name##_open, \
+ .llseek = seq_lseek, \
+ .read = seq_read, \
+ .release = single_release \
+ };
+#endif
+
+/*
+ * Trace events part
+ */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM docg3
+
+#if !defined(_MTD_DOCG3_TRACE) || defined(TRACE_HEADER_MULTI_READ)
+#define _MTD_DOCG3_TRACE
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(docg3_io,
+ TP_PROTO(int op, int width, u16 reg, int val),
+ TP_ARGS(op, width, reg, val),
+ TP_STRUCT__entry(
+ __field(int, op)
+ __field(unsigned char, width)
+ __field(u16, reg)
+ __field(int, val)),
+ TP_fast_assign(
+ __entry->op = op;
+ __entry->width = width;
+ __entry->reg = reg;
+ __entry->val = val;),
+ TP_printk("docg3: %s%02d reg=%04x, val=%04x",
+ __entry->op ? "write" : "read", __entry->width,
+ __entry->reg, __entry->val)
+ );
+#endif
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE docg3
+#include <trace/define_trace.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/doc2000.h>
-/* Where to look for the devices? */
-#ifndef CONFIG_MTD_DOCPROBE_ADDRESS
-#define CONFIG_MTD_DOCPROBE_ADDRESS 0
-#endif
-
static unsigned long doc_config_location = CONFIG_MTD_DOCPROBE_ADDRESS;
module_param(doc_config_location, ulong, 0);
/* debugging */
//#define LART_DEBUG
-/* partition support */
-#define HAVE_PARTITIONS
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mtd/mtd.h>
-#ifdef HAVE_PARTITIONS
#include <linux/mtd/partitions.h>
-#endif
#ifndef CONFIG_SA1100_LART
#error This is for LART architecture only
}
};
-#ifdef HAVE_PARTITIONS
static struct mtd_partition lart_partitions[] = {
/* blob */
{
.size = INITRD_LEN, /* MTDPART_SIZ_FULL */
}
};
-#endif
+#define NUM_PARTITIONS ARRAY_SIZE(lart_partitions)
static int __init lart_flash_init (void)
{
result,mtd.eraseregions[result].erasesize,mtd.eraseregions[result].erasesize / 1024,
result,mtd.eraseregions[result].numblocks);
-#ifdef HAVE_PARTITIONS
printk ("\npartitions = %d\n", ARRAY_SIZE(lart_partitions));
for (result = 0; result < ARRAY_SIZE(lart_partitions); result++)
result,lart_partitions[result].offset,
result,lart_partitions[result].size,lart_partitions[result].size / 1024);
#endif
-#endif
-#ifndef HAVE_PARTITIONS
- result = mtd_device_register(&mtd, NULL, 0);
-#else
result = mtd_device_register(&mtd, lart_partitions,
ARRAY_SIZE(lart_partitions));
-#endif
return (result);
}
static void __exit lart_flash_exit (void)
{
-#ifndef HAVE_PARTITIONS
- mtd_device_unregister(&mtd);
-#else
mtd_device_unregister(&mtd);
-#endif
}
module_init (lart_flash_init);
#include <linux/mtd/cfi.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/of_platform.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
struct spi_device *spi;
struct mutex lock;
struct mtd_info mtd;
- unsigned partitioned:1;
u16 page_size;
u16 addr_width;
u8 erase_opcode;
*/
static int erase_chip(struct m25p *flash)
{
- DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %lldKiB\n",
- dev_name(&flash->spi->dev), __func__,
- (long long)(flash->mtd.size >> 10));
+ pr_debug("%s: %s %lldKiB\n", dev_name(&flash->spi->dev), __func__,
+ (long long)(flash->mtd.size >> 10));
/* Wait until finished previous write command. */
if (wait_till_ready(flash))
*/
static int erase_sector(struct m25p *flash, u32 offset)
{
- DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB at 0x%08x\n",
- dev_name(&flash->spi->dev), __func__,
- flash->mtd.erasesize / 1024, offset);
+ pr_debug("%s: %s %dKiB at 0x%08x\n", dev_name(&flash->spi->dev),
+ __func__, flash->mtd.erasesize / 1024, offset);
/* Wait until finished previous write command. */
if (wait_till_ready(flash))
u32 addr,len;
uint32_t rem;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%llx, len %lld\n",
- dev_name(&flash->spi->dev), __func__, "at",
- (long long)instr->addr, (long long)instr->len);
+ pr_debug("%s: %s at 0x%llx, len %lld\n", dev_name(&flash->spi->dev),
+ __func__, (long long)instr->addr,
+ (long long)instr->len);
/* sanity checks */
if (instr->addr + instr->len > flash->mtd.size)
struct spi_transfer t[2];
struct spi_message m;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
- dev_name(&flash->spi->dev), __func__, "from",
- (u32)from, len);
+ pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+ __func__, (u32)from, len);
/* sanity checks */
if (!len)
struct spi_transfer t[2];
struct spi_message m;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
- dev_name(&flash->spi->dev), __func__, "to",
- (u32)to, len);
+ pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+ __func__, (u32)to, len);
*retlen = 0;
size_t actual;
int cmd_sz, ret;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
- dev_name(&flash->spi->dev), __func__, "to",
- (u32)to, len);
+ pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+ __func__, (u32)to, len);
*retlen = 0;
{ "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K) },
{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024, 8, SECT_4K) },
+ { "at25df321a", INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) },
{ "at25df641", INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },
{ "at26f004", INFO(0x1f0400, 0, 64 * 1024, 8, SECT_4K) },
/* EON -- en25xxx */
{ "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64, SECT_4K) },
{ "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) },
+ { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
/* Intel/Numonyx -- xxxs33b */
*/
tmp = spi_write_then_read(spi, &code, 1, id, 5);
if (tmp < 0) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
- dev_name(&spi->dev), tmp);
+ pr_debug("%s: error %d reading JEDEC ID\n",
+ dev_name(&spi->dev), tmp);
return ERR_PTR(tmp);
}
jedec = id[0];
struct m25p *flash;
struct flash_info *info;
unsigned i;
- struct mtd_partition *parts = NULL;
- int nr_parts = 0;
+ struct mtd_part_parser_data ppdata;
+
+#ifdef CONFIG_MTD_OF_PARTS
+ if (!of_device_is_available(spi->dev.of_node))
+ return -ENODEV;
+#endif
/* Platform data helps sort out which chip type we have, as
* well as how this board partitions it. If we don't have
if (info->flags & M25P_NO_ERASE)
flash->mtd.flags |= MTD_NO_ERASE;
+ ppdata.of_node = spi->dev.of_node;
flash->mtd.dev.parent = &spi->dev;
flash->page_size = info->page_size;
dev_info(&spi->dev, "%s (%lld Kbytes)\n", id->name,
(long long)flash->mtd.size >> 10);
- DEBUG(MTD_DEBUG_LEVEL2,
- "mtd .name = %s, .size = 0x%llx (%lldMiB) "
+ pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) "
".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
flash->mtd.name,
(long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
if (flash->mtd.numeraseregions)
for (i = 0; i < flash->mtd.numeraseregions; i++)
- DEBUG(MTD_DEBUG_LEVEL2,
- "mtd.eraseregions[%d] = { .offset = 0x%llx, "
+ pr_debug("mtd.eraseregions[%d] = { .offset = 0x%llx, "
".erasesize = 0x%.8x (%uKiB), "
".numblocks = %d }\n",
i, (long long)flash->mtd.eraseregions[i].offset,
/* partitions should match sector boundaries; and it may be good to
* use readonly partitions for writeprotected sectors (BP2..BP0).
*/
- if (mtd_has_cmdlinepart()) {
- static const char *part_probes[]
- = { "cmdlinepart", NULL, };
-
- nr_parts = parse_mtd_partitions(&flash->mtd,
- part_probes, &parts, 0);
- }
-
- if (nr_parts <= 0 && data && data->parts) {
- parts = data->parts;
- nr_parts = data->nr_parts;
- }
-
-#ifdef CONFIG_MTD_OF_PARTS
- if (nr_parts <= 0 && spi->dev.of_node) {
- nr_parts = of_mtd_parse_partitions(&spi->dev,
- spi->dev.of_node, &parts);
- }
-#endif
-
- if (nr_parts > 0) {
- for (i = 0; i < nr_parts; i++) {
- DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
- "{.name = %s, .offset = 0x%llx, "
- ".size = 0x%llx (%lldKiB) }\n",
- i, parts[i].name,
- (long long)parts[i].offset,
- (long long)parts[i].size,
- (long long)(parts[i].size >> 10));
- }
- flash->partitioned = 1;
- }
-
- return mtd_device_register(&flash->mtd, parts, nr_parts) == 1 ?
- -ENODEV : 0;
+ return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
+ data ? data->parts : NULL,
+ data ? data->nr_parts : 0);
}
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/math64.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-
/*
* DataFlash is a kind of SPI flash. Most AT45 chips have two buffers in
* each chip, which may be used for double buffered I/O; but this driver
struct mtd_info mtd;
};
+#ifdef CONFIG_OF
+static const struct of_device_id dataflash_dt_ids[] = {
+ { .compatible = "atmel,at45", },
+ { .compatible = "atmel,dataflash", },
+ { /* sentinel */ }
+};
+#else
+#define dataflash_dt_ids NULL
+#endif
+
/* ......................................................................... */
/*
for (;;) {
status = dataflash_status(spi);
if (status < 0) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: status %d?\n",
+ pr_debug("%s: status %d?\n",
dev_name(&spi->dev), status);
status = 0;
}
uint8_t *command;
uint32_t rem;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: erase addr=0x%llx len 0x%llx\n",
+ pr_debug("%s: erase addr=0x%llx len 0x%llx\n",
dev_name(&spi->dev), (long long)instr->addr,
(long long)instr->len);
command[2] = (uint8_t)(pageaddr >> 8);
command[3] = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "ERASE %s: (%x) %x %x %x [%i]\n",
+ pr_debug("ERASE %s: (%x) %x %x %x [%i]\n",
do_block ? "block" : "page",
command[0], command[1], command[2], command[3],
pageaddr);
uint8_t *command;
int status;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: read 0x%x..0x%x\n",
- dev_name(&priv->spi->dev), (unsigned)from, (unsigned)(from + len));
+ pr_debug("%s: read 0x%x..0x%x\n", dev_name(&priv->spi->dev),
+ (unsigned)from, (unsigned)(from + len));
*retlen = 0;
command = priv->command;
- DEBUG(MTD_DEBUG_LEVEL3, "READ: (%x) %x %x %x\n",
+ pr_debug("READ: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
spi_message_init(&msg);
*retlen = msg.actual_length - 8;
status = 0;
} else
- DEBUG(MTD_DEBUG_LEVEL1, "%s: read %x..%x --> %d\n",
+ pr_debug("%s: read %x..%x --> %d\n",
dev_name(&priv->spi->dev),
(unsigned)from, (unsigned)(from + len),
status);
int status = -EINVAL;
uint8_t *command;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: write 0x%x..0x%x\n",
+ pr_debug("%s: write 0x%x..0x%x\n",
dev_name(&spi->dev), (unsigned)to, (unsigned)(to + len));
*retlen = 0;
mutex_lock(&priv->lock);
while (remaining > 0) {
- DEBUG(MTD_DEBUG_LEVEL3, "write @ %i:%i len=%i\n",
+ pr_debug("write @ %i:%i len=%i\n",
pageaddr, offset, writelen);
/* REVISIT:
command[2] = (addr & 0x0000FF00) >> 8;
command[3] = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "TRANSFER: (%x) %x %x %x\n",
+ pr_debug("TRANSFER: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
status = spi_sync(spi, &msg);
if (status < 0)
- DEBUG(MTD_DEBUG_LEVEL1, "%s: xfer %u -> %d \n",
+ pr_debug("%s: xfer %u -> %d\n",
dev_name(&spi->dev), addr, status);
(void) dataflash_waitready(priv->spi);
command[2] = (addr & 0x0000FF00) >> 8;
command[3] = (addr & 0x000000FF);
- DEBUG(MTD_DEBUG_LEVEL3, "PROGRAM: (%x) %x %x %x\n",
+ pr_debug("PROGRAM: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
x[1].tx_buf = writebuf;
status = spi_sync(spi, &msg);
spi_transfer_del(x + 1);
if (status < 0)
- DEBUG(MTD_DEBUG_LEVEL1, "%s: pgm %u/%u -> %d \n",
+ pr_debug("%s: pgm %u/%u -> %d\n",
dev_name(&spi->dev), addr, writelen, status);
(void) dataflash_waitready(priv->spi);
command[2] = (addr & 0x0000FF00) >> 8;
command[3] = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "COMPARE: (%x) %x %x %x\n",
+ pr_debug("COMPARE: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
status = spi_sync(spi, &msg);
if (status < 0)
- DEBUG(MTD_DEBUG_LEVEL1, "%s: compare %u -> %d \n",
+ pr_debug("%s: compare %u -> %d\n",
dev_name(&spi->dev), addr, status);
status = dataflash_waitready(priv->spi);
{
struct dataflash *priv;
struct mtd_info *device;
+ struct mtd_part_parser_data ppdata;
struct flash_platform_data *pdata = spi->dev.platform_data;
char *otp_tag = "";
int err = 0;
- struct mtd_partition *parts;
- int nr_parts = 0;
priv = kzalloc(sizeof *priv, GFP_KERNEL);
if (!priv)
pagesize, otp_tag);
dev_set_drvdata(&spi->dev, priv);
- if (mtd_has_cmdlinepart()) {
- static const char *part_probes[] = { "cmdlinepart", NULL, };
-
- nr_parts = parse_mtd_partitions(device, part_probes, &parts,
- 0);
- }
+ ppdata.of_node = spi->dev.of_node;
+ err = mtd_device_parse_register(device, NULL, &ppdata,
+ pdata ? pdata->parts : NULL,
+ pdata ? pdata->nr_parts : 0);
- if (nr_parts <= 0 && pdata && pdata->parts) {
- parts = pdata->parts;
- nr_parts = pdata->nr_parts;
- }
-
- if (nr_parts > 0) {
- priv->partitioned = 1;
- err = mtd_device_register(device, parts, nr_parts);
- goto out;
- }
-
- if (mtd_device_register(device, NULL, 0) == 1)
- err = -ENODEV;
-
-out:
if (!err)
return 0;
*/
tmp = spi_write_then_read(spi, &code, 1, id, 3);
if (tmp < 0) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
+ pr_debug("%s: error %d reading JEDEC ID\n",
dev_name(&spi->dev), tmp);
return ERR_PTR(tmp);
}
tmp < ARRAY_SIZE(dataflash_data);
tmp++, info++) {
if (info->jedec_id == jedec) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: OTP, sector protect%s\n",
+ pr_debug("%s: OTP, sector protect%s\n",
dev_name(&spi->dev),
(info->flags & SUP_POW2PS)
? ", binary pagesize" : ""
if (info->flags & SUP_POW2PS) {
status = dataflash_status(spi);
if (status < 0) {
- DEBUG(MTD_DEBUG_LEVEL1,
- "%s: status error %d\n",
+ pr_debug("%s: status error %d\n",
dev_name(&spi->dev), status);
return ERR_PTR(status);
}
*/
status = dataflash_status(spi);
if (status <= 0 || status == 0xff) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: status error %d\n",
+ pr_debug("%s: status error %d\n",
dev_name(&spi->dev), status);
if (status == 0 || status == 0xff)
status = -ENODEV;
break;
/* obsolete AT45DB1282 not (yet?) supported */
default:
- DEBUG(MTD_DEBUG_LEVEL1, "%s: unsupported device (%x)\n",
- dev_name(&spi->dev), status & 0x3c);
+ pr_debug("%s: unsupported device (%x)\n", dev_name(&spi->dev),
+ status & 0x3c);
status = -ENODEV;
}
if (status < 0)
- DEBUG(MTD_DEBUG_LEVEL1, "%s: add_dataflash --> %d\n",
- dev_name(&spi->dev), status);
+ pr_debug("%s: add_dataflash --> %d\n", dev_name(&spi->dev),
+ status);
return status;
}
struct dataflash *flash = dev_get_drvdata(&spi->dev);
int status;
- DEBUG(MTD_DEBUG_LEVEL1, "%s: remove\n", dev_name(&spi->dev));
+ pr_debug("%s: remove\n", dev_name(&spi->dev));
status = mtd_device_unregister(&flash->mtd);
if (status == 0) {
.name = "mtd_dataflash",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
+ .of_match_table = dataflash_dt_ids,
},
.probe = dataflash_probe,
struct spi_device *spi;
struct mutex lock;
struct mtd_info mtd;
-
- int partitioned;
};
struct flash_info {
struct sst25l_flash *flash;
struct flash_platform_data *data;
int ret, i;
- struct mtd_partition *parts = NULL;
- int nr_parts = 0;
flash_info = sst25l_match_device(spi);
if (!flash_info)
dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
(long long)flash->mtd.size >> 10);
- DEBUG(MTD_DEBUG_LEVEL2,
- "mtd .name = %s, .size = 0x%llx (%lldMiB) "
+ pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) "
".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
flash->mtd.name,
(long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
flash->mtd.numeraseregions);
- if (mtd_has_cmdlinepart()) {
- static const char *part_probes[] = {"cmdlinepart", NULL};
-
- nr_parts = parse_mtd_partitions(&flash->mtd,
- part_probes,
- &parts, 0);
- }
-
- if (nr_parts <= 0 && data && data->parts) {
- parts = data->parts;
- nr_parts = data->nr_parts;
- }
-
- if (nr_parts > 0) {
- for (i = 0; i < nr_parts; i++) {
- DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
- "{.name = %s, .offset = 0x%llx, "
- ".size = 0x%llx (%lldKiB) }\n",
- i, parts[i].name,
- (long long)parts[i].offset,
- (long long)parts[i].size,
- (long long)(parts[i].size >> 10));
- }
-
- flash->partitioned = 1;
- return mtd_device_register(&flash->mtd, parts,
- nr_parts);
- }
-
- ret = mtd_device_register(&flash->mtd, NULL, 0);
- if (ret == 1) {
+ ret = mtd_device_parse_register(&flash->mtd, NULL, 0,
+ data ? data->parts : NULL,
+ data ? data->nr_parts : 0);
+ if (ret) {
kfree(flash);
dev_set_drvdata(&spi->dev, NULL);
return -ENODEV;
struct erase_info *erase;
xfer = &part->XferInfo[xfernum];
- DEBUG(1, "ftl_cs: erasing xfer unit at 0x%x\n", xfer->Offset);
+ pr_debug("ftl_cs: erasing xfer unit at 0x%x\n", xfer->Offset);
xfer->state = XFER_ERASING;
/* Is there a free erase slot? Always in MTD. */
xfer = &part->XferInfo[i];
xfer->state = XFER_FAILED;
- DEBUG(1, "ftl_cs: preparing xfer unit at 0x%x\n", xfer->Offset);
+ pr_debug("ftl_cs: preparing xfer unit at 0x%x\n", xfer->Offset);
/* Write the transfer unit header */
header = part->header;
eun = &part->EUNInfo[srcunit];
xfer = &part->XferInfo[xferunit];
- DEBUG(2, "ftl_cs: copying block 0x%x to 0x%x\n",
+ pr_debug("ftl_cs: copying block 0x%x to 0x%x\n",
eun->Offset, xfer->Offset);
unit with the fewest erases, and usually pick the data unit with
the most deleted blocks. But with a small probability, pick the
oldest data unit instead. This means that we generally postpone
- the next reclaimation as long as possible, but shuffle static
+ the next reclamation as long as possible, but shuffle static
stuff around a bit for wear leveling.
======================================================================*/
uint32_t best;
int queued, ret;
- DEBUG(0, "ftl_cs: reclaiming space...\n");
- DEBUG(3, "NumTransferUnits == %x\n", part->header.NumTransferUnits);
+ pr_debug("ftl_cs: reclaiming space...\n");
+ pr_debug("NumTransferUnits == %x\n", part->header.NumTransferUnits);
/* Pick the least erased transfer unit */
best = 0xffffffff; xfer = 0xffff;
do {
for (i = 0; i < part->header.NumTransferUnits; i++) {
int n=0;
if (part->XferInfo[i].state == XFER_UNKNOWN) {
- DEBUG(3,"XferInfo[%d].state == XFER_UNKNOWN\n",i);
+ pr_debug("XferInfo[%d].state == XFER_UNKNOWN\n",i);
n=1;
erase_xfer(part, i);
}
if (part->XferInfo[i].state == XFER_ERASING) {
- DEBUG(3,"XferInfo[%d].state == XFER_ERASING\n",i);
+ pr_debug("XferInfo[%d].state == XFER_ERASING\n",i);
n=1;
queued = 1;
}
else if (part->XferInfo[i].state == XFER_ERASED) {
- DEBUG(3,"XferInfo[%d].state == XFER_ERASED\n",i);
+ pr_debug("XferInfo[%d].state == XFER_ERASED\n",i);
n=1;
prepare_xfer(part, i);
}
if (part->XferInfo[i].state == XFER_PREPARED) {
- DEBUG(3,"XferInfo[%d].state == XFER_PREPARED\n",i);
+ pr_debug("XferInfo[%d].state == XFER_PREPARED\n",i);
n=1;
if (part->XferInfo[i].EraseCount <= best) {
best = part->XferInfo[i].EraseCount;
}
}
if (!n)
- DEBUG(3,"XferInfo[%d].state == %x\n",i, part->XferInfo[i].state);
+ pr_debug("XferInfo[%d].state == %x\n",i, part->XferInfo[i].state);
}
if (xfer == 0xffff) {
if (queued) {
- DEBUG(1, "ftl_cs: waiting for transfer "
+ pr_debug("ftl_cs: waiting for transfer "
"unit to be prepared...\n");
if (part->mbd.mtd->sync)
part->mbd.mtd->sync(part->mbd.mtd);
printk(KERN_NOTICE "ftl_cs: reclaim failed: no "
"suitable transfer units!\n");
else
- DEBUG(1, "ftl_cs: reclaim failed: no "
+ pr_debug("ftl_cs: reclaim failed: no "
"suitable transfer units!\n");
return -EIO;
eun = 0;
if ((jiffies % shuffle_freq) == 0) {
- DEBUG(1, "ftl_cs: recycling freshest block...\n");
+ pr_debug("ftl_cs: recycling freshest block...\n");
best = 0xffffffff;
for (i = 0; i < part->DataUnits; i++)
if (part->EUNInfo[i].EraseCount <= best) {
printk(KERN_NOTICE "ftl_cs: reclaim failed: "
"no free blocks!\n");
else
- DEBUG(1,"ftl_cs: reclaim failed: "
+ pr_debug("ftl_cs: reclaim failed: "
"no free blocks!\n");
return -EIO;
printk(KERN_NOTICE "ftl_cs: bad free list!\n");
return 0;
}
- DEBUG(2, "ftl_cs: found free block at %d in %d\n", blk, eun);
+ pr_debug("ftl_cs: found free block at %d in %d\n", blk, eun);
return blk;
} /* find_free */
int ret;
size_t offset, retlen;
- DEBUG(2, "ftl_cs: ftl_read(0x%p, 0x%lx, %ld)\n",
+ pr_debug("ftl_cs: ftl_read(0x%p, 0x%lx, %ld)\n",
part, sector, nblocks);
if (!(part->state & FTL_FORMATTED)) {
printk(KERN_NOTICE "ftl_cs: bad partition\n");
int ret;
size_t retlen, offset;
- DEBUG(2, "ftl_cs: set_bam_entry(0x%p, 0x%x, 0x%x)\n",
+ pr_debug("ftl_cs: set_bam_entry(0x%p, 0x%x, 0x%x)\n",
part, log_addr, virt_addr);
bsize = 1 << part->header.EraseUnitSize;
eun = log_addr / bsize;
int ret;
size_t retlen, offset;
- DEBUG(2, "ftl_cs: ftl_write(0x%p, %ld, %ld)\n",
+ pr_debug("ftl_cs: ftl_write(0x%p, %ld, %ld)\n",
part, sector, nblocks);
if (!(part->state & FTL_FORMATTED)) {
printk(KERN_NOTICE "ftl_cs: bad partition\n");
partition_t *part = (void *)dev;
uint32_t bsize = 1 << part->header.EraseUnitSize;
- DEBUG(1, "FTL erase sector %ld for %d sectors\n",
+ pr_debug("FTL erase sector %ld for %d sectors\n",
sector, nr_sects);
while (nr_sects) {
return;
}
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: add_mtd for %s\n", mtd->name);
+ pr_debug("INFTL: add_mtd for %s\n", mtd->name);
inftl = kzalloc(sizeof(*inftl), GFP_KERNEL);
- if (!inftl) {
- printk(KERN_WARNING "INFTL: Out of memory for data structures\n");
+ if (!inftl)
return;
- }
inftl->mbd.mtd = mtd;
inftl->mbd.devnum = -1;
{
struct INFTLrecord *inftl = (void *)dev;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: remove_dev (i=%d)\n", dev->devnum);
+ pr_debug("INFTL: remove_dev (i=%d)\n", dev->devnum);
del_mtd_blktrans_dev(dev);
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs & (mtd->writesize - 1);
ops.ooblen = len;
ops.oobbuf = buf;
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs & (mtd->writesize - 1);
ops.ooblen = len;
ops.oobbuf = buf;
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs;
ops.ooblen = mtd->oobsize;
ops.oobbuf = oob;
u16 pot = inftl->LastFreeEUN;
int silly = inftl->nb_blocks;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_findfreeblock(inftl=%p,"
- "desperate=%d)\n", inftl, desperate);
+ pr_debug("INFTL: INFTL_findfreeblock(inftl=%p,desperate=%d)\n",
+ inftl, desperate);
/*
* Normally, we force a fold to happen before we run out of free
* blocks completely.
*/
if (!desperate && inftl->numfreeEUNs < 2) {
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: there are too few free "
- "EUNs (%d)\n", inftl->numfreeEUNs);
+ pr_debug("INFTL: there are too few free EUNs (%d)\n",
+ inftl->numfreeEUNs);
return BLOCK_NIL;
}
struct inftl_oob oob;
size_t retlen;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_foldchain(inftl=%p,thisVUC=%d,"
- "pending=%d)\n", inftl, thisVUC, pendingblock);
+ pr_debug("INFTL: INFTL_foldchain(inftl=%p,thisVUC=%d,pending=%d)\n",
+ inftl, thisVUC, pendingblock);
memset(BlockMap, 0xff, sizeof(BlockMap));
memset(BlockDeleted, 0, sizeof(BlockDeleted));
* Chain, and the Erase Unit into which we are supposed to be copying.
* Go for it.
*/
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: folding chain %d into unit %d\n",
- thisVUC, targetEUN);
+ pr_debug("INFTL: folding chain %d into unit %d\n", thisVUC, targetEUN);
for (block = 0; block < inftl->EraseSize/SECTORSIZE ; block++) {
unsigned char movebuf[SECTORSIZE];
ret = mtd->read(mtd, (inftl->EraseSize * BlockMap[block]) +
(block * SECTORSIZE), SECTORSIZE, &retlen,
movebuf);
- if (ret < 0 && ret != -EUCLEAN) {
+ if (ret < 0 && !mtd_is_bitflip(ret)) {
ret = mtd->read(mtd,
(inftl->EraseSize * BlockMap[block]) +
(block * SECTORSIZE), SECTORSIZE,
&retlen, movebuf);
if (ret != -EIO)
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: error went "
- "away on retry?\n");
+ pr_debug("INFTL: error went away on retry?\n");
}
memset(&oob, 0xff, sizeof(struct inftl_oob));
oob.b.Status = oob.b.Status1 = SECTOR_USED;
* is important, by doing oldest first if we crash/reboot then it
* it is relatively simple to clean up the mess).
*/
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: want to erase virtual chain %d\n",
- thisVUC);
+ pr_debug("INFTL: want to erase virtual chain %d\n", thisVUC);
for (;;) {
/* Find oldest unit in chain. */
u16 ChainLength = 0, thislen;
u16 chain, EUN;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_makefreeblock(inftl=%p,"
+ pr_debug("INFTL: INFTL_makefreeblock(inftl=%p,"
"pending=%d)\n", inftl, pendingblock);
for (chain = 0; chain < inftl->nb_blocks; chain++) {
size_t retlen;
int silly, silly2 = 3;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_findwriteunit(inftl=%p,"
- "block=%d)\n", inftl, block);
+ pr_debug("INFTL: INFTL_findwriteunit(inftl=%p,block=%d)\n",
+ inftl, block);
do {
/*
blockofs, 8, &retlen, (char *)&bci);
status = bci.Status | bci.Status1;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: status of block %d in "
- "EUN %d is %x\n", block , writeEUN, status);
+ pr_debug("INFTL: status of block %d in EUN %d is %x\n",
+ block , writeEUN, status);
switch(status) {
case SECTOR_FREE:
* Hopefully we free something, lets try again.
* This time we are desperate...
*/
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: using desperate==1 "
- "to find free EUN to accommodate write to "
- "VUC %d\n", thisVUC);
+ pr_debug("INFTL: using desperate==1 to find free EUN "
+ "to accommodate write to VUC %d\n",
+ thisVUC);
writeEUN = INFTL_findfreeblock(inftl, 1);
if (writeEUN == BLOCK_NIL) {
/*
struct inftl_bci bci;
size_t retlen;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_trydeletechain(inftl=%p,"
+ pr_debug("INFTL: INFTL_trydeletechain(inftl=%p,"
"thisVUC=%d)\n", inftl, thisVUC);
memset(BlockUsed, 0, sizeof(BlockUsed));
* For each block in the chain free it and make it available
* for future use. Erase from the oldest unit first.
*/
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: deleting empty VUC %d\n", thisVUC);
+ pr_debug("INFTL: deleting empty VUC %d\n", thisVUC);
for (;;) {
u16 *prevEUN = &inftl->VUtable[thisVUC];
/* If the chain is all gone already, we're done */
if (thisEUN == BLOCK_NIL) {
- DEBUG(MTD_DEBUG_LEVEL2, "INFTL: Empty VUC %d for deletion was already absent\n", thisEUN);
+ pr_debug("INFTL: Empty VUC %d for deletion was already absent\n", thisEUN);
return;
}
thisEUN = *prevEUN;
}
- DEBUG(MTD_DEBUG_LEVEL3, "Deleting EUN %d from VUC %d\n",
+ pr_debug("Deleting EUN %d from VUC %d\n",
thisEUN, thisVUC);
if (INFTL_formatblock(inftl, thisEUN) < 0) {
size_t retlen;
struct inftl_bci bci;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_deleteblock(inftl=%p,"
+ pr_debug("INFTL: INFTL_deleteblock(inftl=%p,"
"block=%d)\n", inftl, block);
while (thisEUN < inftl->nb_blocks) {
struct inftl_oob oob;
char *p, *pend;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: inftl_writeblock(inftl=%p,block=%ld,"
+ pr_debug("INFTL: inftl_writeblock(inftl=%p,block=%ld,"
"buffer=%p)\n", inftl, block, buffer);
/* Is block all zero? */
struct inftl_bci bci;
size_t retlen;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: inftl_readblock(inftl=%p,block=%ld,"
+ pr_debug("INFTL: inftl_readblock(inftl=%p,block=%ld,"
"buffer=%p)\n", inftl, block, buffer);
while (thisEUN < inftl->nb_blocks) {
int ret = mtd->read(mtd, ptr, SECTORSIZE, &retlen, buffer);
/* Handle corrected bit flips gracefully */
- if (ret < 0 && ret != -EUCLEAN)
+ if (ret < 0 && !mtd_is_bitflip(ret))
return -EIO;
}
return 0;
struct INFTLPartition *ip;
size_t retlen;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: find_boot_record(inftl=%p)\n", inftl);
+ pr_debug("INFTL: find_boot_record(inftl=%p)\n", inftl);
/*
* Assume logical EraseSize == physical erasesize for starting the
mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
- if (CONFIG_MTD_DEBUG_VERBOSE >= 2) {
- printk("INFTL: Media Header ->\n"
- " bootRecordID = %s\n"
- " NoOfBootImageBlocks = %d\n"
- " NoOfBinaryPartitions = %d\n"
- " NoOfBDTLPartitions = %d\n"
- " BlockMultiplerBits = %d\n"
- " FormatFlgs = %d\n"
- " OsakVersion = 0x%x\n"
- " PercentUsed = %d\n",
- mh->bootRecordID, mh->NoOfBootImageBlocks,
- mh->NoOfBinaryPartitions,
- mh->NoOfBDTLPartitions,
- mh->BlockMultiplierBits, mh->FormatFlags,
- mh->OsakVersion, mh->PercentUsed);
- }
-#endif
+ pr_debug("INFTL: Media Header ->\n"
+ " bootRecordID = %s\n"
+ " NoOfBootImageBlocks = %d\n"
+ " NoOfBinaryPartitions = %d\n"
+ " NoOfBDTLPartitions = %d\n"
+ " BlockMultiplerBits = %d\n"
+ " FormatFlgs = %d\n"
+ " OsakVersion = 0x%x\n"
+ " PercentUsed = %d\n",
+ mh->bootRecordID, mh->NoOfBootImageBlocks,
+ mh->NoOfBinaryPartitions,
+ mh->NoOfBDTLPartitions,
+ mh->BlockMultiplierBits, mh->FormatFlags,
+ mh->OsakVersion, mh->PercentUsed);
if (mh->NoOfBDTLPartitions == 0) {
printk(KERN_WARNING "INFTL: Media Header sanity check "
ip->spareUnits = le32_to_cpu(ip->spareUnits);
ip->Reserved0 = le32_to_cpu(ip->Reserved0);
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
- if (CONFIG_MTD_DEBUG_VERBOSE >= 2) {
- printk(" PARTITION[%d] ->\n"
- " virtualUnits = %d\n"
- " firstUnit = %d\n"
- " lastUnit = %d\n"
- " flags = 0x%x\n"
- " spareUnits = %d\n",
- i, ip->virtualUnits, ip->firstUnit,
- ip->lastUnit, ip->flags,
- ip->spareUnits);
- }
-#endif
+ pr_debug(" PARTITION[%d] ->\n"
+ " virtualUnits = %d\n"
+ " firstUnit = %d\n"
+ " lastUnit = %d\n"
+ " flags = 0x%x\n"
+ " spareUnits = %d\n",
+ i, ip->virtualUnits, ip->firstUnit,
+ ip->lastUnit, ip->flags,
+ ip->spareUnits);
if (ip->Reserved0 != ip->firstUnit) {
struct erase_info *instr = &inftl->instr;
*
* Return: 0 when succeed, -1 on error.
*
- * ToDo: 1. Is it neceressary to check_free_sector after erasing ??
+ * ToDo: 1. Is it necessary to check_free_sector after erasing ??
*/
int INFTL_formatblock(struct INFTLrecord *inftl, int block)
{
struct mtd_info *mtd = inftl->mbd.mtd;
int physblock;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_formatblock(inftl=%p,"
- "block=%d)\n", inftl, block);
+ pr_debug("INFTL: INFTL_formatblock(inftl=%p,block=%d)\n", inftl, block);
memset(instr, 0, sizeof(struct erase_info));
{
int i;
- printk("-------------------------------------------"
+ pr_debug("-------------------------------------------"
"----------------------------------\n");
- printk("VUtable[%d] ->", s->nb_blocks);
+ pr_debug("VUtable[%d] ->", s->nb_blocks);
for (i = 0; i < s->nb_blocks; i++) {
if ((i % 8) == 0)
- printk("\n%04x: ", i);
- printk("%04x ", s->VUtable[i]);
+ pr_debug("\n%04x: ", i);
+ pr_debug("%04x ", s->VUtable[i]);
}
- printk("\n-------------------------------------------"
+ pr_debug("\n-------------------------------------------"
"----------------------------------\n");
- printk("PUtable[%d-%d=%d] ->", s->firstEUN, s->lastEUN, s->nb_blocks);
+ pr_debug("PUtable[%d-%d=%d] ->", s->firstEUN, s->lastEUN, s->nb_blocks);
for (i = 0; i <= s->lastEUN; i++) {
if ((i % 8) == 0)
- printk("\n%04x: ", i);
- printk("%04x ", s->PUtable[i]);
+ pr_debug("\n%04x: ", i);
+ pr_debug("%04x ", s->PUtable[i]);
}
- printk("\n-------------------------------------------"
+ pr_debug("\n-------------------------------------------"
"----------------------------------\n");
- printk("INFTL ->\n"
+ pr_debug("INFTL ->\n"
" EraseSize = %d\n"
" h/s/c = %d/%d/%d\n"
" numvunits = %d\n"
s->numvunits, s->firstEUN, s->lastEUN, s->numfreeEUNs,
s->LastFreeEUN, s->nb_blocks, s->nb_boot_blocks);
- printk("\n-------------------------------------------"
+ pr_debug("\n-------------------------------------------"
"----------------------------------\n");
}
{
int logical, block, i;
- printk("-------------------------------------------"
+ pr_debug("-------------------------------------------"
"----------------------------------\n");
- printk("INFTL Virtual Unit Chains:\n");
+ pr_debug("INFTL Virtual Unit Chains:\n");
for (logical = 0; logical < s->nb_blocks; logical++) {
block = s->VUtable[logical];
if (block > s->nb_blocks)
continue;
- printk(" LOGICAL %d --> %d ", logical, block);
+ pr_debug(" LOGICAL %d --> %d ", logical, block);
for (i = 0; i < s->nb_blocks; i++) {
if (s->PUtable[block] == BLOCK_NIL)
break;
block = s->PUtable[block];
- printk("%d ", block);
+ pr_debug("%d ", block);
}
- printk("\n");
+ pr_debug("\n");
}
- printk("-------------------------------------------"
+ pr_debug("-------------------------------------------"
"----------------------------------\n");
}
int i;
u8 *ANACtable, ANAC;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_mount(inftl=%p)\n", s);
+ pr_debug("INFTL: INFTL_mount(inftl=%p)\n", s);
/* Search for INFTL MediaHeader and Spare INFTL Media Header */
if (find_boot_record(s) < 0) {
* NOTEXPLORED state. Then at the end we will try to format it and
* mark it as free.
*/
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 1, explore each unit\n");
+ pr_debug("INFTL: pass 1, explore each unit\n");
for (first_block = s->firstEUN; first_block <= s->lastEUN; first_block++) {
if (s->PUtable[first_block] != BLOCK_NOTEXPLORED)
continue;
logical_block = BLOCK_NIL;
}
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
- if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
- INFTL_dumptables(s);
-#endif
+ INFTL_dumptables(s);
/*
* Second pass, check for infinite loops in chains. These are
* possible because we don't update the previous pointers when
* we fold chains. No big deal, just fix them up in PUtable.
*/
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 2, validate virtual chains\n");
+ pr_debug("INFTL: pass 2, validate virtual chains\n");
for (logical_block = 0; logical_block < s->numvunits; logical_block++) {
block = s->VUtable[logical_block];
last_block = BLOCK_NIL;
}
}
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
- if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
- INFTL_dumptables(s);
- if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
- INFTL_dumpVUchains(s);
-#endif
+ INFTL_dumptables(s);
+ INFTL_dumpVUchains(s);
/*
* Third pass, format unreferenced blocks and init free block count.
s->numfreeEUNs = 0;
s->LastFreeEUN = BLOCK_NIL;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 3, format unused blocks\n");
+ pr_debug("INFTL: pass 3, format unused blocks\n");
for (block = s->firstEUN; block <= s->lastEUN; block++) {
if (s->PUtable[block] == BLOCK_NOTEXPLORED) {
printk("INFTL: unreferenced block %d, formatting it\n",
are mapped on your particular target board. Refer to the
memory map which should hopefully be in the documentation for
your board.
- Ignore this option if you use run-time physmap configuration
- (i.e., run-time calling physmap_configure()).
config MTD_PHYSMAP_LEN
hex "Physical length of flash mapping"
than the total amount of flash present. Refer to the memory
map which should hopefully be in the documentation for your
board.
- Ignore this option if you use run-time physmap configuration
- (i.e., run-time calling physmap_configure()).
config MTD_PHYSMAP_BANKWIDTH
int "Bank width in octets"
in octets. For example, if you have a data bus width of 32
bits, you would set the bus width octet value to 4. This is
used internally by the CFI drivers.
- Ignore this option if you use run-time physmap configuration
- (i.e., run-time calling physmap_configure()).
config MTD_PHYSMAP_OF
tristate "Flash device in physical memory map based on OF description"
config MTD_LANTIQ
tristate "Lantiq SoC NOR support"
depends on LANTIQ
- select MTD_PARTITIONS
help
Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
This enables access to the flash chips on the Hitachi SolutionEngine and
similar boards. Say 'Y' if you are building a kernel for such a board.
-config MTD_ARM_INTEGRATOR
- tristate "CFI Flash device mapped on ARM Integrator/P720T"
- depends on ARM && MTD_CFI
-
config MTD_CDB89712
tristate "Cirrus CDB89712 evaluation board mappings"
depends on MTD_CFI && ARCH_CDB89712
This enables access to the NV-RAM on autronix autcpu12 board.
If you have such a board, say 'Y'.
-config MTD_EDB7312
- tristate "CFI Flash device mapped on EDB7312"
- depends on ARCH_EDB7312 && MTD_CFI
- help
- This enables access to the CFI Flash on the Cogent EDB7312 board.
- If you have such a board, say 'Y' here.
-
config MTD_IMPA7
tristate "JEDEC Flash device mapped on impA7"
depends on ARM && MTD_JEDECPROBE
This enables access to the NOR Flash on the impA7 board of
implementa GmbH. If you have such a board, say 'Y' here.
-config MTD_CEIVA
- tristate "JEDEC Flash device mapped on Ceiva/Polaroid PhotoMax Digital Picture Frame"
- depends on MTD_JEDECPROBE && ARCH_CEIVA
- help
- This enables access to the flash chips on the Ceiva/Polaroid
- PhotoMax Digital Picture Frame.
- If you have such a device, say 'Y'.
-
config MTD_H720X
tristate "Hynix evaluation board mappings"
depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
obj-$(CONFIG_MTD_TSUNAMI) += tsunami_flash.o
obj-$(CONFIG_MTD_PXA2XX) += pxa2xx-flash.o
obj-$(CONFIG_MTD_MBX860) += mbx860.o
-obj-$(CONFIG_MTD_CEIVA) += ceiva.o
obj-$(CONFIG_MTD_OCTAGON) += octagon-5066.o
obj-$(CONFIG_MTD_PHYSMAP) += physmap.o
obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
-obj-$(CONFIG_MTD_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_IMPA7) += impa7.o
obj-$(CONFIG_MTD_FORTUNET) += fortunet.o
obj-$(CONFIG_MTD_UCLINUX) += uclinux.o
uint32_t flash_ambctl0, flash_ambctl1;
uint32_t save_ambctl0, save_ambctl1;
unsigned long irq_flags;
- struct mtd_partition *parts;
};
static void switch_to_flash(struct async_state *state)
return -ENXIO;
}
- ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
- if (ret > 0) {
- pr_devinit(KERN_NOTICE DRIVER_NAME ": Using commandline partition definition\n");
- mtd_device_register(state->mtd, pdata->parts, ret);
- state->parts = pdata->parts;
- } else if (pdata->nr_parts) {
- pr_devinit(KERN_NOTICE DRIVER_NAME ": Using board partition definition\n");
- mtd_device_register(state->mtd, pdata->parts, pdata->nr_parts);
- } else {
- pr_devinit(KERN_NOTICE DRIVER_NAME ": no partition info available, registering whole flash at once\n");
- mtd_device_register(state->mtd, NULL, 0);
- }
+ mtd_device_parse_register(state->mtd, part_probe_types, 0,
+ pdata->parts, pdata->nr_parts);
platform_set_drvdata(pdev, state);
struct async_state *state = platform_get_drvdata(pdev);
gpio_free(state->enet_flash_pin);
mtd_device_unregister(state->mtd);
- kfree(state->parts);
map_destroy(state->mtd);
kfree(state);
return 0;
+++ /dev/null
-/*
- * Ceiva flash memory driver.
- * Copyright (C) 2002 Rob Scott <rscott@mtrob.fdns.net>
- *
- * Note: this driver supports jedec compatible devices. Modification
- * for CFI compatible devices should be straight forward: change
- * jedec_probe to cfi_probe.
- *
- * Based on: sa1100-flash.c, which has the following copyright:
- * Flash memory access on SA11x0 based devices
- *
- * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/concat.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/io.h>
-#include <asm/sizes.h>
-
-/*
- * This isn't complete yet, so...
- */
-#define CONFIG_MTD_CEIVA_STATICMAP
-
-#ifdef CONFIG_MTD_CEIVA_STATICMAP
-/*
- * See include/linux/mtd/partitions.h for definition of the mtd_partition
- * structure.
- *
- * Please note:
- * 1. The flash size given should be the largest flash size that can
- * be accommodated.
- *
- * 2. The bus width must defined in clps_setup_flash.
- *
- * The MTD layer will detect flash chip aliasing and reduce the size of
- * the map accordingly.
- *
- */
-
-#ifdef CONFIG_ARCH_CEIVA
-/* Flash / Partition sizing */
-/* For the 28F8003, we use the block mapping to calcuate the sizes */
-#define MAX_SIZE_KiB (16 + 8 + 8 + 96 + (7*128))
-#define BOOT_PARTITION_SIZE_KiB (16)
-#define PARAMS_PARTITION_SIZE_KiB (8)
-#define KERNEL_PARTITION_SIZE_KiB (4*128)
-/* Use both remaining portion of first flash, and all of second flash */
-#define ROOT_PARTITION_SIZE_KiB (3*128) + (8*128)
-
-static struct mtd_partition ceiva_partitions[] = {
- {
- .name = "Ceiva BOOT partition",
- .size = BOOT_PARTITION_SIZE_KiB*1024,
- .offset = 0,
-
- },{
- .name = "Ceiva parameters partition",
- .size = PARAMS_PARTITION_SIZE_KiB*1024,
- .offset = (16 + 8) * 1024,
- },{
- .name = "Ceiva kernel partition",
- .size = (KERNEL_PARTITION_SIZE_KiB)*1024,
- .offset = 0x20000,
-
- },{
- .name = "Ceiva root filesystem partition",
- .offset = MTDPART_OFS_APPEND,
- .size = (ROOT_PARTITION_SIZE_KiB)*1024,
- }
-};
-#endif
-
-static int __init clps_static_partitions(struct mtd_partition **parts)
-{
- int nb_parts = 0;
-
-#ifdef CONFIG_ARCH_CEIVA
- if (machine_is_ceiva()) {
- *parts = ceiva_partitions;
- nb_parts = ARRAY_SIZE(ceiva_partitions);
- }
-#endif
- return nb_parts;
-}
-#endif
-
-struct clps_info {
- unsigned long base;
- unsigned long size;
- int width;
- void *vbase;
- struct map_info *map;
- struct mtd_info *mtd;
- struct resource *res;
-};
-
-#define NR_SUBMTD 4
-
-static struct clps_info info[NR_SUBMTD];
-
-static int __init clps_setup_mtd(struct clps_info *clps, int nr, struct mtd_info **rmtd)
-{
- struct mtd_info *subdev[nr];
- struct map_info *maps;
- int i, found = 0, ret = 0;
-
- /*
- * Allocate the map_info structs in one go.
- */
- maps = kzalloc(sizeof(struct map_info) * nr, GFP_KERNEL);
- if (!maps)
- return -ENOMEM;
- /*
- * Claim and then map the memory regions.
- */
- for (i = 0; i < nr; i++) {
- if (clps[i].base == (unsigned long)-1)
- break;
-
- clps[i].res = request_mem_region(clps[i].base, clps[i].size, "clps flash");
- if (!clps[i].res) {
- ret = -EBUSY;
- break;
- }
-
- clps[i].map = maps + i;
-
- clps[i].map->name = "clps flash";
- clps[i].map->phys = clps[i].base;
-
- clps[i].vbase = ioremap(clps[i].base, clps[i].size);
- if (!clps[i].vbase) {
- ret = -ENOMEM;
- break;
- }
-
- clps[i].map->virt = (void __iomem *)clps[i].vbase;
- clps[i].map->bankwidth = clps[i].width;
- clps[i].map->size = clps[i].size;
-
- simple_map_init(&clps[i].map);
-
- clps[i].mtd = do_map_probe("jedec_probe", clps[i].map);
- if (clps[i].mtd == NULL) {
- ret = -ENXIO;
- break;
- }
- clps[i].mtd->owner = THIS_MODULE;
- subdev[i] = clps[i].mtd;
-
- printk(KERN_INFO "clps flash: JEDEC device at 0x%08lx, %dMiB, "
- "%d-bit\n", clps[i].base, clps[i].mtd->size >> 20,
- clps[i].width * 8);
- found += 1;
- }
-
- /*
- * ENXIO is special. It means we didn't find a chip when
- * we probed. We need to tear down the mapping, free the
- * resource and mark it as such.
- */
- if (ret == -ENXIO) {
- iounmap(clps[i].vbase);
- clps[i].vbase = NULL;
- release_resource(clps[i].res);
- clps[i].res = NULL;
- }
-
- /*
- * If we found one device, don't bother with concat support.
- * If we found multiple devices, use concat if we have it
- * available, otherwise fail.
- */
- if (ret == 0 || ret == -ENXIO) {
- if (found == 1) {
- *rmtd = subdev[0];
- ret = 0;
- } else if (found > 1) {
- /*
- * We detected multiple devices. Concatenate
- * them together.
- */
- *rmtd = mtd_concat_create(subdev, found,
- "clps flash");
- if (*rmtd == NULL)
- ret = -ENXIO;
- }
- }
-
- /*
- * If we failed, clean up.
- */
- if (ret) {
- do {
- if (clps[i].mtd)
- map_destroy(clps[i].mtd);
- if (clps[i].vbase)
- iounmap(clps[i].vbase);
- if (clps[i].res)
- release_resource(clps[i].res);
- } while (i--);
-
- kfree(maps);
- }
-
- return ret;
-}
-
-static void __exit clps_destroy_mtd(struct clps_info *clps, struct mtd_info *mtd)
-{
- int i;
-
- mtd_device_unregister(mtd);
-
- if (mtd != clps[0].mtd)
- mtd_concat_destroy(mtd);
-
- for (i = NR_SUBMTD; i >= 0; i--) {
- if (clps[i].mtd)
- map_destroy(clps[i].mtd);
- if (clps[i].vbase)
- iounmap(clps[i].vbase);
- if (clps[i].res)
- release_resource(clps[i].res);
- }
- kfree(clps[0].map);
-}
-
-/*
- * We define the memory space, size, and width for the flash memory
- * space here.
- */
-
-static int __init clps_setup_flash(void)
-{
- int nr = 0;
-
-#ifdef CONFIG_ARCH_CEIVA
- if (machine_is_ceiva()) {
- info[0].base = CS0_PHYS_BASE;
- info[0].size = SZ_32M;
- info[0].width = CEIVA_FLASH_WIDTH;
- info[1].base = CS1_PHYS_BASE;
- info[1].size = SZ_32M;
- info[1].width = CEIVA_FLASH_WIDTH;
- nr = 2;
- }
-#endif
- return nr;
-}
-
-static struct mtd_partition *parsed_parts;
-static const char *probes[] = { "cmdlinepart", "RedBoot", NULL };
-
-static void __init clps_locate_partitions(struct mtd_info *mtd)
-{
- const char *part_type = NULL;
- int nr_parts = 0;
- do {
- /*
- * Partition selection stuff.
- */
- nr_parts = parse_mtd_partitions(mtd, probes, &parsed_parts, 0);
- if (nr_parts > 0) {
- part_type = "command line";
- break;
- }
-#ifdef CONFIG_MTD_CEIVA_STATICMAP
- nr_parts = clps_static_partitions(&parsed_parts);
- if (nr_parts > 0) {
- part_type = "static";
- break;
- }
- printk("found: %d partitions\n", nr_parts);
-#endif
- } while (0);
-
- if (nr_parts == 0) {
- printk(KERN_NOTICE "clps flash: no partition info "
- "available, registering whole flash\n");
- mtd_device_register(mtd, NULL, 0);
- } else {
- printk(KERN_NOTICE "clps flash: using %s partition "
- "definition\n", part_type);
- mtd_device_register(mtd, parsed_parts, nr_parts);
- }
-
- /* Always succeeds. */
-}
-
-static void __exit clps_destroy_partitions(void)
-{
- kfree(parsed_parts);
-}
-
-static struct mtd_info *mymtd;
-
-static int __init clps_mtd_init(void)
-{
- int ret;
- int nr;
-
- nr = clps_setup_flash();
- if (nr < 0)
- return nr;
-
- ret = clps_setup_mtd(info, nr, &mymtd);
- if (ret)
- return ret;
-
- clps_locate_partitions(mymtd);
-
- return 0;
-}
-
-static void __exit clps_mtd_cleanup(void)
-{
- clps_destroy_mtd(info, mymtd);
- clps_destroy_partitions();
-}
-
-module_init(clps_mtd_init);
-module_exit(clps_mtd_cleanup);
-
-MODULE_AUTHOR("Rob Scott");
-MODULE_DESCRIPTION("Cirrus Logic JEDEC map driver");
-MODULE_LICENSE("GPL");
/* Partition stuff */
-static struct mtd_partition *dc21285_parts;
static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
static int __init init_dc21285(void)
{
-
- int nrparts;
-
/* Determine bankwidth */
switch (*CSR_SA110_CNTL & (3<<14)) {
case SA110_CNTL_ROMWIDTH_8:
dc21285_mtd->owner = THIS_MODULE;
- nrparts = parse_mtd_partitions(dc21285_mtd, probes, &dc21285_parts, 0);
- mtd_device_register(dc21285_mtd, dc21285_parts, nrparts);
+ mtd_device_parse_register(dc21285_mtd, probes, 0, NULL, 0);
if(machine_is_ebsa285()) {
/*
static void __exit cleanup_dc21285(void)
{
mtd_device_unregister(dc21285_mtd);
- if (dc21285_parts)
- kfree(dc21285_parts);
map_destroy(dc21285_mtd);
iounmap(dc21285_map.virt);
}
+++ /dev/null
-/*
- * Handle mapping of the NOR flash on Cogent EDB7312 boards
- *
- * Copyright 2002 SYSGO Real-Time Solutions GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#define WINDOW_ADDR 0x00000000 /* physical properties of flash */
-#define WINDOW_SIZE 0x01000000
-#define BUSWIDTH 2
-#define FLASH_BLOCKSIZE_MAIN 0x20000
-#define FLASH_NUMBLOCKS_MAIN 128
-/* can be "cfi_probe", "jedec_probe", "map_rom", NULL }; */
-#define PROBETYPES { "cfi_probe", NULL }
-
-#define MSG_PREFIX "EDB7312-NOR:" /* prefix for our printk()'s */
-#define MTDID "edb7312-nor" /* for mtdparts= partitioning */
-
-static struct mtd_info *mymtd;
-
-struct map_info edb7312nor_map = {
- .name = "NOR flash on EDB7312",
- .size = WINDOW_SIZE,
- .bankwidth = BUSWIDTH,
- .phys = WINDOW_ADDR,
-};
-
-/*
- * MTD partitioning stuff
- */
-static struct mtd_partition static_partitions[3] =
-{
- {
- .name = "ARMboot",
- .size = 0x40000,
- .offset = 0
- },
- {
- .name = "Kernel",
- .size = 0x200000,
- .offset = 0x40000
- },
- {
- .name = "RootFS",
- .size = 0xDC0000,
- .offset = 0x240000
- },
-};
-
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-static int mtd_parts_nb = 0;
-static struct mtd_partition *mtd_parts = 0;
-
-static int __init init_edb7312nor(void)
-{
- static const char *rom_probe_types[] = PROBETYPES;
- const char **type;
- const char *part_type = 0;
-
- printk(KERN_NOTICE MSG_PREFIX "0x%08x at 0x%08x\n",
- WINDOW_SIZE, WINDOW_ADDR);
- edb7312nor_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
-
- if (!edb7312nor_map.virt) {
- printk(MSG_PREFIX "failed to ioremap\n");
- return -EIO;
- }
-
- simple_map_init(&edb7312nor_map);
-
- mymtd = 0;
- type = rom_probe_types;
- for(; !mymtd && *type; type++) {
- mymtd = do_map_probe(*type, &edb7312nor_map);
- }
- if (mymtd) {
- mymtd->owner = THIS_MODULE;
-
- mtd_parts_nb = parse_mtd_partitions(mymtd, probes, &mtd_parts, MTDID);
- if (mtd_parts_nb > 0)
- part_type = "detected";
-
- if (mtd_parts_nb == 0) {
- mtd_parts = static_partitions;
- mtd_parts_nb = ARRAY_SIZE(static_partitions);
- part_type = "static";
- }
-
- if (mtd_parts_nb == 0)
- printk(KERN_NOTICE MSG_PREFIX "no partition info available\n");
- else
- printk(KERN_NOTICE MSG_PREFIX
- "using %s partition definition\n", part_type);
- /* Register the whole device first. */
- mtd_device_register(mymtd, NULL, 0);
- mtd_device_register(mymtd, mtd_parts, mtd_parts_nb);
- return 0;
- }
-
- iounmap((void *)edb7312nor_map.virt);
- return -ENXIO;
-}
-
-static void __exit cleanup_edb7312nor(void)
-{
- if (mymtd) {
- mtd_device_unregister(mymtd);
- map_destroy(mymtd);
- }
- if (edb7312nor_map.virt) {
- iounmap((void *)edb7312nor_map.virt);
- edb7312nor_map.virt = 0;
- }
-}
-
-module_init(init_edb7312nor);
-module_exit(cleanup_edb7312nor);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
-MODULE_DESCRIPTION("Generic configurable MTD map driver");
*/
static int __devinit gpio_flash_probe(struct platform_device *pdev)
{
- int nr_parts;
size_t i, arr_size;
struct physmap_flash_data *pdata;
struct resource *memory;
return -ENXIO;
}
- nr_parts = parse_mtd_partitions(state->mtd, part_probe_types,
- &pdata->parts, 0);
- if (nr_parts > 0) {
- pr_devinit(KERN_NOTICE PFX "Using commandline partition definition\n");
- kfree(pdata->parts);
- } else if (pdata->nr_parts) {
- pr_devinit(KERN_NOTICE PFX "Using board partition definition\n");
- nr_parts = pdata->nr_parts;
- } else {
- pr_devinit(KERN_NOTICE PFX "no partition info available, registering whole flash at once\n");
- nr_parts = 0;
- }
- mtd_device_register(state->mtd, pdata->parts, nr_parts);
+ mtd_device_parse_register(state->mtd, part_probe_types, 0,
+ pdata->parts, pdata->nr_parts);
return 0;
}
#define NUM_PARTITIONS ARRAY_SIZE(h720x_partitions)
-static int nr_mtd_parts;
-static struct mtd_partition *mtd_parts;
-static const char *probes[] = { "cmdlinepart", NULL };
-
/*
* Initialize FLASH support
*/
static int __init h720x_mtd_init(void)
{
-
- char *part_type = NULL;
-
h720x_map.virt = ioremap(h720x_map.phys, h720x_map.size);
if (!h720x_map.virt) {
if (mymtd) {
mymtd->owner = THIS_MODULE;
- nr_mtd_parts = parse_mtd_partitions(mymtd, probes, &mtd_parts, 0);
- if (nr_mtd_parts > 0)
- part_type = "command line";
- if (nr_mtd_parts <= 0) {
- mtd_parts = h720x_partitions;
- nr_mtd_parts = NUM_PARTITIONS;
- part_type = "builtin";
- }
- printk(KERN_INFO "Using %s partition table\n", part_type);
- mtd_device_register(mymtd, mtd_parts, nr_mtd_parts);
+ mtd_device_parse_register(mymtd, NULL, 0,
+ h720x_partitions, NUM_PARTITIONS);
return 0;
}
map_destroy(mymtd);
}
- /* Free partition info, if commandline partition was used */
- if (mtd_parts && (mtd_parts != h720x_partitions))
- kfree (mtd_parts);
-
if (h720x_map.virt) {
iounmap((void *)h720x_map.virt);
h720x_map.virt = 0;
/*
* MTD partitioning stuff
*/
-static struct mtd_partition static_partitions[] =
+static struct mtd_partition partitions[] =
{
{
.name = "FileSystem",
},
};
-static int mtd_parts_nb[NUM_FLASHBANKS];
-static struct mtd_partition *mtd_parts[NUM_FLASHBANKS];
-
-static const char *probes[] = { "cmdlinepart", NULL };
-
static int __init init_impa7(void)
{
static const char *rom_probe_types[] = PROBETYPES;
const char **type;
- const char *part_type = 0;
int i;
static struct { u_long addr; u_long size; } pt[NUM_FLASHBANKS] = {
{ WINDOW_ADDR0, WINDOW_SIZE0 },
if (impa7_mtd[i]) {
impa7_mtd[i]->owner = THIS_MODULE;
devicesfound++;
- mtd_parts_nb[i] = parse_mtd_partitions(impa7_mtd[i],
- probes,
- &mtd_parts[i],
- 0);
- if (mtd_parts_nb[i] > 0) {
- part_type = "command line";
- } else {
- mtd_parts[i] = static_partitions;
- mtd_parts_nb[i] = ARRAY_SIZE(static_partitions);
- part_type = "static";
- }
-
- printk(KERN_NOTICE MSG_PREFIX
- "using %s partition definition\n",
- part_type);
- mtd_device_register(impa7_mtd[i],
- mtd_parts[i], mtd_parts_nb[i]);
+ mtd_device_parse_register(impa7_mtd[i], NULL, 0,
+ partitions,
+ ARRAY_SIZE(partitions));
}
else
iounmap((void *)impa7_map[i].virt);
void __iomem *csr_base;
struct map_info map;
struct mtd_info *info;
- int nr_parts;
struct pci_dev *dev;
};
static int __devinit vr_nor_init_partitions(struct vr_nor_mtd *p)
{
- struct mtd_partition *parts;
- static const char *part_probes[] = { "cmdlinepart", NULL };
-
/* register the flash bank */
/* partition the flash bank */
- p->nr_parts = parse_mtd_partitions(p->info, part_probes, &parts, 0);
- return mtd_device_register(p->info, parts, p->nr_parts);
+ return mtd_device_parse_register(p->info, NULL, 0, NULL, 0);
}
static void __devexit vr_nor_destroy_mtd_setup(struct vr_nor_mtd *p)
struct ixp2000_flash_info {
struct mtd_info *mtd;
struct map_info map;
- struct mtd_partition *partitions;
struct resource *res;
};
if (info->map.map_priv_1)
iounmap((void *) info->map.map_priv_1);
- kfree(info->partitions);
-
if (info->res) {
release_resource(info->res);
kfree(info->res);
}
info->mtd->owner = THIS_MODULE;
- err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0);
- if (err > 0) {
- err = mtd_device_register(info->mtd, info->partitions, err);
- if(err)
- dev_err(&dev->dev, "Could not parse partitions\n");
- }
-
+ err = mtd_device_parse_register(info->mtd, probes, 0, NULL, 0);
if (err)
goto Error;
struct ixp4xx_flash_info {
struct mtd_info *mtd;
struct map_info map;
- struct mtd_partition *partitions;
struct resource *res;
};
if (info->map.virt)
iounmap(info->map.virt);
- kfree(info->partitions);
-
if (info->res) {
release_resource(info->res);
kfree(info->res);
{
struct flash_platform_data *plat = dev->dev.platform_data;
struct ixp4xx_flash_info *info;
- const char *part_type = NULL;
- int nr_parts = 0;
int err = -1;
if (!plat)
/* Use the fast version */
info->map.write = ixp4xx_write16;
- nr_parts = parse_mtd_partitions(info->mtd, probes, &info->partitions,
- dev->resource->start);
- if (nr_parts > 0) {
- part_type = "dynamic";
- } else {
- info->partitions = plat->parts;
- nr_parts = plat->nr_parts;
- part_type = "static";
- }
- if (nr_parts == 0)
- printk(KERN_NOTICE "IXP4xx flash: no partition info "
- "available, registering whole flash\n");
- else
- printk(KERN_NOTICE "IXP4xx flash: using %s partition "
- "definition\n", part_type);
-
- err = mtd_device_register(info->mtd, info->partitions, nr_parts);
- if (err)
+ err = mtd_device_parse_register(info->mtd, probes, dev->resource->start,
+ plat->parts, plat->nr_parts);
+ if (err) {
printk(KERN_ERR "Could not parse partitions\n");
-
- if (err)
goto Error;
+ }
return 0;
spin_unlock_irqrestore(&ebu_lock, flags);
}
-static const char const *part_probe_types[] = { "cmdlinepart", NULL };
-
static int __init
ltq_mtd_probe(struct platform_device *pdev)
{
struct physmap_flash_data *ltq_mtd_data = dev_get_platdata(&pdev->dev);
struct ltq_mtd *ltq_mtd;
- struct mtd_partition *parts;
struct resource *res;
- int nr_parts = 0;
struct cfi_private *cfi;
int err;
cfi->addr_unlock1 ^= 1;
cfi->addr_unlock2 ^= 1;
- nr_parts = parse_mtd_partitions(ltq_mtd->mtd,
- part_probe_types, &parts, 0);
- if (nr_parts > 0) {
- dev_info(&pdev->dev,
- "using %d partitions from cmdline", nr_parts);
- } else {
- nr_parts = ltq_mtd_data->nr_parts;
- parts = ltq_mtd_data->parts;
- }
-
- err = mtd_device_register(ltq_mtd->mtd, parts, nr_parts);
+ err = mtd_device_parse_register(ltq_mtd->mtd, NULL, 0,
+ ltq_mtd_data->parts, ltq_mtd_data->nr_parts);
if (err) {
dev_err(&pdev->dev, "failed to add partitions\n");
goto err_destroy;
/* cache; could be found out of res */
unsigned long win_mask;
- int nr_parts;
- struct mtd_partition *parts;
-
spinlock_t lock;
};
static char *rom_probe_types[] = { "cfi_probe", NULL };
-static char *part_probe_types[] = { "cmdlinepart", NULL };
-
static int latch_addr_flash_remove(struct platform_device *dev)
{
struct latch_addr_flash_info *info;
latch_addr_data = dev->dev.platform_data;
if (info->mtd != NULL) {
- if (info->nr_parts)
- kfree(info->parts);
mtd_device_unregister(info->mtd);
map_destroy(info->mtd);
}
}
info->mtd->owner = THIS_MODULE;
- err = parse_mtd_partitions(info->mtd, (const char **)part_probe_types,
- &info->parts, 0);
- if (err > 0) {
- mtd_device_register(info->mtd, info->parts, err);
- return 0;
- }
- if (latch_addr_data->nr_parts) {
- pr_notice("Using latch-addr-flash partition information\n");
- mtd_device_register(info->mtd,
- latch_addr_data->parts,
- latch_addr_data->nr_parts);
- return 0;
- }
-
- mtd_device_register(info->mtd, NULL, 0);
+ mtd_device_parse_register(info->mtd, NULL, 0,
+ latch_addr_data->parts, latch_addr_data->nr_parts);
return 0;
iounmap:
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
-#ifdef CONFIG_MTD_DEBUG
-static int debug = CONFIG_MTD_DEBUG_VERBOSE;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Set Debug Level 0=quiet, 5=noisy");
-#undef DEBUG
-#define DEBUG(n, format, arg...) \
- if (n <= debug) { \
- printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __func__ , ## arg); \
- }
-
-#else
-#undef DEBUG
-#define DEBUG(n, arg...)
-static const int debug = 0;
-#endif
-
#define info(format, arg...) printk(KERN_INFO "pcmciamtd: " format "\n" , ## arg)
#define DRIVER_DESC "PCMCIA Flash memory card driver"
int ret;
if (!pcmcia_dev_present(dev->p_dev)) {
- DEBUG(1, "device removed");
+ pr_debug("device removed\n");
return 0;
}
offset = to & ~(dev->win_size-1);
if (offset != dev->offset) {
- DEBUG(2, "Remapping window from 0x%8.8x to 0x%8.8x",
+ pr_debug("Remapping window from 0x%8.8x to 0x%8.8x\n",
dev->offset, offset);
ret = pcmcia_map_mem_page(dev->p_dev, win, offset);
if (ret != 0)
return d;
d.x[0] = readb(addr);
- DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%02lx", ofs, addr, d.x[0]);
+ pr_debug("ofs = 0x%08lx (%p) data = 0x%02lx\n", ofs, addr, d.x[0]);
return d;
}
return d;
d.x[0] = readw(addr);
- DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%04lx", ofs, addr, d.x[0]);
+ pr_debug("ofs = 0x%08lx (%p) data = 0x%04lx\n", ofs, addr, d.x[0]);
return d;
}
struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
unsigned long win_size = dev->win_size;
- DEBUG(3, "to = %p from = %lu len = %zd", to, from, len);
+ pr_debug("to = %p from = %lu len = %zd\n", to, from, len);
while(len) {
int toread = win_size - (from & (win_size-1));
caddr_t addr;
if(!addr)
return;
- DEBUG(4, "memcpy from %p to %p len = %d", addr, to, toread);
+ pr_debug("memcpy from %p to %p len = %d\n", addr, to, toread);
memcpy_fromio(to, addr, toread);
len -= toread;
to += toread;
if(!addr)
return;
- DEBUG(3, "adr = 0x%08lx (%p) data = 0x%02lx", adr, addr, d.x[0]);
+ pr_debug("adr = 0x%08lx (%p) data = 0x%02lx\n", adr, addr, d.x[0]);
writeb(d.x[0], addr);
}
if(!addr)
return;
- DEBUG(3, "adr = 0x%08lx (%p) data = 0x%04lx", adr, addr, d.x[0]);
+ pr_debug("adr = 0x%08lx (%p) data = 0x%04lx\n", adr, addr, d.x[0]);
writew(d.x[0], addr);
}
struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
unsigned long win_size = dev->win_size;
- DEBUG(3, "to = %lu from = %p len = %zd", to, from, len);
+ pr_debug("to = %lu from = %p len = %zd\n", to, from, len);
while(len) {
int towrite = win_size - (to & (win_size-1));
caddr_t addr;
if(!addr)
return;
- DEBUG(4, "memcpy from %p to %p len = %d", from, addr, towrite);
+ pr_debug("memcpy from %p to %p len = %d\n", from, addr, towrite);
memcpy_toio(addr, from, towrite);
len -= towrite;
to += towrite;
return d;
d.x[0] = readb(win_base + ofs);
- DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%02lx",
+ pr_debug("ofs = 0x%08lx (%p) data = 0x%02lx\n",
ofs, win_base + ofs, d.x[0]);
return d;
}
return d;
d.x[0] = readw(win_base + ofs);
- DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%04lx",
+ pr_debug("ofs = 0x%08lx (%p) data = 0x%04lx\n",
ofs, win_base + ofs, d.x[0]);
return d;
}
if(DEV_REMOVED(map))
return;
- DEBUG(3, "to = %p from = %lu len = %zd", to, from, len);
+ pr_debug("to = %p from = %lu len = %zd\n", to, from, len);
memcpy_fromio(to, win_base + from, len);
}
if(DEV_REMOVED(map))
return;
- DEBUG(3, "adr = 0x%08lx (%p) data = 0x%02lx",
+ pr_debug("adr = 0x%08lx (%p) data = 0x%02lx\n",
adr, win_base + adr, d.x[0]);
writeb(d.x[0], win_base + adr);
}
if(DEV_REMOVED(map))
return;
- DEBUG(3, "adr = 0x%08lx (%p) data = 0x%04lx",
+ pr_debug("adr = 0x%08lx (%p) data = 0x%04lx\n",
adr, win_base + adr, d.x[0]);
writew(d.x[0], win_base + adr);
}
if(DEV_REMOVED(map))
return;
- DEBUG(3, "to = %lu from = %p len = %zd", to, from, len);
+ pr_debug("to = %lu from = %p len = %zd\n", to, from, len);
memcpy_toio(win_base + to, from, len);
}
struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
struct pcmcia_device *link = dev->p_dev;
- DEBUG(2, "dev = %p on = %d vpp = %d\n", dev, on, dev->vpp);
+ pr_debug("dev = %p on = %d vpp = %d\n\n", dev, on, dev->vpp);
pcmcia_fixup_vpp(link, on ? dev->vpp : 0);
}
{
struct pcmciamtd_dev *dev = link->priv;
- DEBUG(3, "link = 0x%p", link);
+ pr_debug("link = 0x%p\n", link);
if (link->resource[2]->end) {
if(dev->win_base) {
}
-#ifdef CONFIG_MTD_DEBUG
static int pcmciamtd_cistpl_format(struct pcmcia_device *p_dev,
tuple_t *tuple,
void *priv_data)
if (!pcmcia_parse_tuple(tuple, &parse)) {
cistpl_format_t *t = &parse.format;
(void)t; /* Shut up, gcc */
- DEBUG(2, "Format type: %u, Error Detection: %u, offset = %u, length =%u",
+ pr_debug("Format type: %u, Error Detection: %u, offset = %u, length =%u\n",
t->type, t->edc, t->offset, t->length);
}
return -ENOSPC;
if (!pcmcia_parse_tuple(tuple, &parse)) {
cistpl_jedec_t *t = &parse.jedec;
for (i = 0; i < t->nid; i++)
- DEBUG(2, "JEDEC: 0x%02x 0x%02x",
+ pr_debug("JEDEC: 0x%02x 0x%02x\n",
t->id[i].mfr, t->id[i].info);
}
return -ENOSPC;
}
-#endif
static int pcmciamtd_cistpl_device(struct pcmcia_device *p_dev,
tuple_t *tuple,
if (pcmcia_parse_tuple(tuple, &parse))
return -EINVAL;
- DEBUG(2, "Common memory:");
+ pr_debug("Common memory:\n");
dev->pcmcia_map.size = t->dev[0].size;
/* from here on: DEBUG only */
for (i = 0; i < t->ndev; i++) {
- DEBUG(2, "Region %d, type = %u", i, t->dev[i].type);
- DEBUG(2, "Region %d, wp = %u", i, t->dev[i].wp);
- DEBUG(2, "Region %d, speed = %u ns", i, t->dev[i].speed);
- DEBUG(2, "Region %d, size = %u bytes", i, t->dev[i].size);
+ pr_debug("Region %d, type = %u\n", i, t->dev[i].type);
+ pr_debug("Region %d, wp = %u\n", i, t->dev[i].wp);
+ pr_debug("Region %d, speed = %u ns\n", i, t->dev[i].speed);
+ pr_debug("Region %d, size = %u bytes\n", i, t->dev[i].size);
}
return 0;
}
dev->pcmcia_map.bankwidth = t->geo[0].buswidth;
/* from here on: DEBUG only */
for (i = 0; i < t->ngeo; i++) {
- DEBUG(2, "region: %d bankwidth = %u", i, t->geo[i].buswidth);
- DEBUG(2, "region: %d erase_block = %u", i, t->geo[i].erase_block);
- DEBUG(2, "region: %d read_block = %u", i, t->geo[i].read_block);
- DEBUG(2, "region: %d write_block = %u", i, t->geo[i].write_block);
- DEBUG(2, "region: %d partition = %u", i, t->geo[i].partition);
- DEBUG(2, "region: %d interleave = %u", i, t->geo[i].interleave);
+ pr_debug("region: %d bankwidth = %u\n", i, t->geo[i].buswidth);
+ pr_debug("region: %d erase_block = %u\n", i, t->geo[i].erase_block);
+ pr_debug("region: %d read_block = %u\n", i, t->geo[i].read_block);
+ pr_debug("region: %d write_block = %u\n", i, t->geo[i].write_block);
+ pr_debug("region: %d partition = %u\n", i, t->geo[i].partition);
+ pr_debug("region: %d interleave = %u\n", i, t->geo[i].interleave);
}
return 0;
}
if (p_dev->prod_id[i])
strcat(dev->mtd_name, p_dev->prod_id[i]);
}
- DEBUG(2, "Found name: %s", dev->mtd_name);
+ pr_debug("Found name: %s\n", dev->mtd_name);
}
-#ifdef CONFIG_MTD_DEBUG
pcmcia_loop_tuple(p_dev, CISTPL_FORMAT, pcmciamtd_cistpl_format, NULL);
pcmcia_loop_tuple(p_dev, CISTPL_JEDEC_C, pcmciamtd_cistpl_jedec, NULL);
-#endif
pcmcia_loop_tuple(p_dev, CISTPL_DEVICE, pcmciamtd_cistpl_device, dev);
pcmcia_loop_tuple(p_dev, CISTPL_DEVICE_GEO, pcmciamtd_cistpl_geo, dev);
if(force_size) {
dev->pcmcia_map.size = force_size << 20;
- DEBUG(2, "size forced to %dM", force_size);
+ pr_debug("size forced to %dM\n", force_size);
}
if(bankwidth) {
dev->pcmcia_map.bankwidth = bankwidth;
- DEBUG(2, "bankwidth forced to %d", bankwidth);
+ pr_debug("bankwidth forced to %d\n", bankwidth);
}
dev->pcmcia_map.name = dev->mtd_name;
*new_name = 1;
}
- DEBUG(1, "Device: Size: %lu Width:%d Name: %s",
+ pr_debug("Device: Size: %lu Width:%d Name: %s\n",
dev->pcmcia_map.size,
dev->pcmcia_map.bankwidth << 3, dev->mtd_name);
}
static char *probes[] = { "jedec_probe", "cfi_probe" };
int new_name = 0;
- DEBUG(3, "link=0x%p", link);
+ pr_debug("link=0x%p\n", link);
card_settings(dev, link, &new_name);
do {
int ret;
- DEBUG(2, "requesting window with size = %luKiB memspeed = %d",
+ pr_debug("requesting window with size = %luKiB memspeed = %d\n",
(unsigned long) resource_size(link->resource[2]) >> 10,
mem_speed);
ret = pcmcia_request_window(link, link->resource[2], mem_speed);
- DEBUG(2, "ret = %d dev->win_size = %d", ret, dev->win_size);
+ pr_debug("ret = %d dev->win_size = %d\n", ret, dev->win_size);
if(ret) {
j++;
link->resource[2]->start = 0;
force_size << 20 : MAX_PCMCIA_ADDR;
link->resource[2]->end >>= j;
} else {
- DEBUG(2, "Got window of size %luKiB", (unsigned long)
+ pr_debug("Got window of size %luKiB\n", (unsigned long)
resource_size(link->resource[2]) >> 10);
dev->win_size = resource_size(link->resource[2]);
break;
}
} while (link->resource[2]->end >= 0x1000);
- DEBUG(2, "dev->win_size = %d", dev->win_size);
+ pr_debug("dev->win_size = %d\n", dev->win_size);
if(!dev->win_size) {
dev_err(&dev->p_dev->dev, "Cannot allocate memory window\n");
pcmciamtd_release(link);
return -ENODEV;
}
- DEBUG(1, "Allocated a window of %dKiB", dev->win_size >> 10);
+ pr_debug("Allocated a window of %dKiB\n", dev->win_size >> 10);
/* Get write protect status */
dev->win_base = ioremap(link->resource[2]->start,
pcmciamtd_release(link);
return -ENODEV;
}
- DEBUG(1, "mapped window dev = %p @ %pR, base = %p",
+ pr_debug("mapped window dev = %p @ %pR, base = %p\n",
dev, link->resource[2], dev->win_base);
dev->offset = 0;
}
link->config_index = 0;
- DEBUG(2, "Setting Configuration");
+ pr_debug("Setting Configuration\n");
ret = pcmcia_enable_device(link);
if (ret != 0) {
if (dev->win_base) {
mtd = do_map_probe("map_rom", &dev->pcmcia_map);
} else {
for(i = 0; i < ARRAY_SIZE(probes); i++) {
- DEBUG(1, "Trying %s", probes[i]);
+ pr_debug("Trying %s\n", probes[i]);
mtd = do_map_probe(probes[i], &dev->pcmcia_map);
if(mtd)
break;
- DEBUG(1, "FAILED: %s", probes[i]);
+ pr_debug("FAILED: %s\n", probes[i]);
}
}
if(!mtd) {
- DEBUG(1, "Can not find an MTD");
+ pr_debug("Can not find an MTD\n");
pcmciamtd_release(link);
return -ENODEV;
}
/* If the memory found is fits completely into the mapped PCMCIA window,
use the faster non-remapping read/write functions */
if(mtd->size <= dev->win_size) {
- DEBUG(1, "Using non remapping memory functions");
+ pr_debug("Using non remapping memory functions\n");
dev->pcmcia_map.map_priv_2 = (unsigned long)dev->win_base;
if (dev->pcmcia_map.bankwidth == 1) {
dev->pcmcia_map.read = pcmcia_read8;
static int pcmciamtd_suspend(struct pcmcia_device *dev)
{
- DEBUG(2, "EVENT_PM_RESUME");
+ pr_debug("EVENT_PM_RESUME\n");
/* get_lock(link); */
static int pcmciamtd_resume(struct pcmcia_device *dev)
{
- DEBUG(2, "EVENT_PM_SUSPEND");
+ pr_debug("EVENT_PM_SUSPEND\n");
/* free_lock(link); */
{
struct pcmciamtd_dev *dev = link->priv;
- DEBUG(3, "link=0x%p", link);
+ pr_debug("link=0x%p\n", link);
if(dev->mtd_info) {
mtd_device_unregister(dev->mtd_info);
/* Create new memory card device */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev) return -ENOMEM;
- DEBUG(1, "dev=0x%p", dev);
+ pr_debug("dev=0x%p\n", dev);
dev->p_dev = link;
link->priv = dev;
static void __exit exit_pcmciamtd(void)
{
- DEBUG(1, DRIVER_DESC " unloading");
+ pr_debug(DRIVER_DESC " unloading");
pcmcia_unregister_driver(&pcmciamtd_driver);
}
struct mtd_info *mtd[MAX_RESOURCES];
struct mtd_info *cmtd;
struct map_info map[MAX_RESOURCES];
- int nr_parts;
- struct mtd_partition *parts;
};
static int physmap_flash_remove(struct platform_device *dev)
if (info->cmtd) {
mtd_device_unregister(info->cmtd);
- if (info->nr_parts)
- kfree(info->parts);
if (info->cmtd != info->mtd[0])
mtd_concat_destroy(info->cmtd);
}
if (err)
goto err_out;
- err = parse_mtd_partitions(info->cmtd, part_probe_types,
- &info->parts, 0);
- if (err > 0) {
- mtd_device_register(info->cmtd, info->parts, err);
- info->nr_parts = err;
- return 0;
- }
-
- if (physmap_data->nr_parts) {
- printk(KERN_NOTICE "Using physmap partition information\n");
- mtd_device_register(info->cmtd, physmap_data->parts,
- physmap_data->nr_parts);
- return 0;
- }
-
- mtd_device_register(info->cmtd, NULL, 0);
-
+ mtd_device_parse_register(info->cmtd, part_probe_types, 0,
+ physmap_data->parts, physmap_data->nr_parts);
return 0;
err_out:
.num_resources = 1,
.resource = &physmap_flash_resource,
};
-
-void physmap_configure(unsigned long addr, unsigned long size,
- int bankwidth, void (*set_vpp)(struct map_info *, int))
-{
- physmap_flash_resource.start = addr;
- physmap_flash_resource.end = addr + size - 1;
- physmap_flash_data.width = bankwidth;
- physmap_flash_data.set_vpp = set_vpp;
-}
-
-void physmap_set_partitions(struct mtd_partition *parts, int num_parts)
-{
- physmap_flash_data.nr_parts = num_parts;
- physmap_flash_data.parts = parts;
-}
#endif
static int __init physmap_init(void)
struct of_flash {
struct mtd_info *cmtd;
- struct mtd_partition *parts;
int list_size; /* number of elements in of_flash_list */
struct of_flash_list list[0];
};
-#define OF_FLASH_PARTS(info) ((info)->parts)
-static int parse_obsolete_partitions(struct platform_device *dev,
- struct of_flash *info,
- struct device_node *dp)
-{
- int i, plen, nr_parts;
- const struct {
- __be32 offset, len;
- } *part;
- const char *names;
-
- part = of_get_property(dp, "partitions", &plen);
- if (!part)
- return 0; /* No partitions found */
-
- dev_warn(&dev->dev, "Device tree uses obsolete partition map binding\n");
-
- nr_parts = plen / sizeof(part[0]);
-
- info->parts = kzalloc(nr_parts * sizeof(*info->parts), GFP_KERNEL);
- if (!info->parts)
- return -ENOMEM;
-
- names = of_get_property(dp, "partition-names", &plen);
-
- for (i = 0; i < nr_parts; i++) {
- info->parts[i].offset = be32_to_cpu(part->offset);
- info->parts[i].size = be32_to_cpu(part->len) & ~1;
- if (be32_to_cpu(part->len) & 1) /* bit 0 set signifies read only partition */
- info->parts[i].mask_flags = MTD_WRITEABLE;
-
- if (names && (plen > 0)) {
- int len = strlen(names) + 1;
-
- info->parts[i].name = (char *)names;
- plen -= len;
- names += len;
- } else {
- info->parts[i].name = "unnamed";
- }
-
- part++;
- }
-
- return nr_parts;
-}
-
static int of_flash_remove(struct platform_device *dev)
{
struct of_flash *info;
mtd_concat_destroy(info->cmtd);
}
- if (info->cmtd) {
- if (OF_FLASH_PARTS(info))
- kfree(OF_FLASH_PARTS(info));
+ if (info->cmtd)
mtd_device_unregister(info->cmtd);
- }
for (i = 0; i < info->list_size; i++) {
if (info->list[i].mtd)
specifies the list of partition probers to use. If none is given then the
default is use. These take precedence over other device tree
information. */
-static const char *part_probe_types_def[] = { "cmdlinepart", "RedBoot", NULL };
+static const char *part_probe_types_def[] = { "cmdlinepart", "RedBoot",
+ "ofpart", "ofoldpart", NULL };
static const char ** __devinit of_get_probes(struct device_node *dp)
{
const char *cp;
int reg_tuple_size;
struct mtd_info **mtd_list = NULL;
resource_size_t res_size;
+ struct mtd_part_parser_data ppdata;
match = of_match_device(of_flash_match, &dev->dev);
if (!match)
if (err)
goto err_out;
+ ppdata.of_node = dp;
part_probe_types = of_get_probes(dp);
- err = parse_mtd_partitions(info->cmtd, part_probe_types,
- &info->parts, 0);
- if (err < 0) {
- of_free_probes(part_probe_types);
- goto err_out;
- }
+ mtd_device_parse_register(info->cmtd, part_probe_types, &ppdata,
+ NULL, 0);
of_free_probes(part_probe_types);
- if (err == 0) {
- err = of_mtd_parse_partitions(&dev->dev, dp, &info->parts);
- if (err < 0)
- goto err_out;
- }
-
- if (err == 0) {
- err = parse_obsolete_partitions(dev, info, dp);
- if (err < 0)
- goto err_out;
- }
-
- mtd_device_register(info->cmtd, info->parts, err);
-
kfree(mtd_list);
return 0;
struct device *dev;
struct mtd_info *mtd;
struct map_info map;
- struct mtd_partition *partitions;
- bool free_partitions;
struct resource *area;
struct platdata_mtd_ram *pdata;
};
if (info->mtd) {
mtd_device_unregister(info->mtd);
- if (info->partitions) {
- if (info->free_partitions)
- kfree(info->partitions);
- }
map_destroy(info->mtd);
}
/* check to see if there are any available partitions, or wether
* to add this device whole */
- if (!pdata->nr_partitions) {
- /* try to probe using the supplied probe type */
- if (pdata->probes) {
- err = parse_mtd_partitions(info->mtd, pdata->probes,
- &info->partitions, 0);
- info->free_partitions = 1;
- if (err > 0)
- err = mtd_device_register(info->mtd,
- info->partitions, err);
- }
- }
- /* use the static mapping */
- else
- err = mtd_device_register(info->mtd, pdata->partitions,
- pdata->nr_partitions);
+ err = mtd_device_parse_register(info->mtd, pdata->probes, 0,
+ pdata->partitions, pdata->nr_partitions);
if (!err)
dev_info(&pdev->dev, "registered mtd device\n");
}
struct pxa2xx_flash_info {
- struct mtd_partition *parts;
- int nr_parts;
struct mtd_info *mtd;
struct map_info map;
};
{
struct flash_platform_data *flash = pdev->dev.platform_data;
struct pxa2xx_flash_info *info;
- struct mtd_partition *parts;
struct resource *res;
- int ret = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
info->map.bankwidth = flash->width;
info->map.phys = res->start;
info->map.size = resource_size(res);
- info->parts = flash->parts;
- info->nr_parts = flash->nr_parts;
info->map.virt = ioremap(info->map.phys, info->map.size);
if (!info->map.virt) {
}
info->mtd->owner = THIS_MODULE;
- ret = parse_mtd_partitions(info->mtd, probes, &parts, 0);
-
- if (ret > 0) {
- info->nr_parts = ret;
- info->parts = parts;
- }
-
- if (!info->nr_parts)
- printk("Registering %s as whole device\n",
- info->map.name);
-
- mtd_device_register(info->mtd, info->parts, info->nr_parts);
+ mtd_device_parse_register(info->mtd, probes, 0, NULL, 0);
platform_set_drvdata(pdev, info);
return 0;
iounmap(info->map.virt);
if (info->map.cached)
iounmap(info->map.cached);
- kfree(info->parts);
kfree(info);
return 0;
}
struct rbtx4939_flash_info {
struct mtd_info *mtd;
struct map_info map;
- int nr_parts;
- struct mtd_partition *parts;
};
static int rbtx4939_flash_remove(struct platform_device *dev)
if (info->mtd) {
struct rbtx4939_flash_data *pdata = dev->dev.platform_data;
- if (info->nr_parts)
- kfree(info->parts);
mtd_device_unregister(info->mtd);
map_destroy(info->mtd);
}
}
static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
-static const char *part_probe_types[] = { "cmdlinepart", NULL };
static int rbtx4939_flash_probe(struct platform_device *dev)
{
info->mtd->owner = THIS_MODULE;
if (err)
goto err_out;
+ err = mtd_device_parse_register(info->mtd, NULL, 0,
+ pdata->parts, pdata->nr_parts);
- err = parse_mtd_partitions(info->mtd, part_probe_types,
- &info->parts, 0);
- if (err > 0) {
- mtd_device_register(info->mtd, info->parts, err);
- info->nr_parts = err;
- return 0;
- }
-
- if (pdata->nr_parts) {
- pr_notice("Using rbtx4939 partition information\n");
- mtd_device_register(info->mtd, pdata->parts, pdata->nr_parts);
- return 0;
- }
-
- mtd_device_register(info->mtd, NULL, 0);
+ if (err)
+ goto err_out;
return 0;
err_out:
};
struct sa_info {
- struct mtd_partition *parts;
struct mtd_info *mtd;
int num_subdev;
- unsigned int nr_parts;
struct sa_subdev_info subdev[0];
};
mtd_concat_destroy(info->mtd);
}
- kfree(info->parts);
-
for (i = info->num_subdev - 1; i >= 0; i--)
sa1100_destroy_subdev(&info->subdev[i]);
kfree(info);
static int __devinit sa1100_mtd_probe(struct platform_device *pdev)
{
struct flash_platform_data *plat = pdev->dev.platform_data;
- struct mtd_partition *parts;
- const char *part_type = NULL;
struct sa_info *info;
- int err, nr_parts = 0;
+ int err;
if (!plat)
return -ENODEV;
/*
* Partition selection stuff.
*/
- nr_parts = parse_mtd_partitions(info->mtd, part_probes, &parts, 0);
- if (nr_parts > 0) {
- info->parts = parts;
- part_type = "dynamic";
- } else {
- parts = plat->parts;
- nr_parts = plat->nr_parts;
- part_type = "static";
- }
-
- if (nr_parts == 0)
- printk(KERN_NOTICE "SA1100 flash: no partition info "
- "available, registering whole flash\n");
- else
- printk(KERN_NOTICE "SA1100 flash: using %s partition "
- "definition\n", part_type);
-
- mtd_device_register(info->mtd, parts, nr_parts);
-
- info->nr_parts = nr_parts;
+ mtd_device_parse_register(info->mtd, part_probes, 0,
+ plat->parts, plat->nr_parts);
platform_set_drvdata(pdev, info);
err = 0;
static struct mtd_info *flash_mtd;
static struct mtd_info *eprom_mtd;
-static struct mtd_partition *parsed_parts;
-
struct map_info soleng_eprom_map = {
.name = "Solution Engine EPROM",
.size = 0x400000,
.size = MTDPART_SIZ_FULL,
}
};
+#define NUM_PARTITIONS ARRAY_SIZE(superh_se_partitions)
+#else
+#define superh_se_partitions NULL
+#define NUM_PARTITIONS 0
#endif /* CONFIG_MTD_SUPERH_RESERVE */
static int __init init_soleng_maps(void)
{
- int nr_parts = 0;
-
/* First probe at offset 0 */
soleng_flash_map.phys = 0;
soleng_flash_map.virt = (void __iomem *)P2SEGADDR(0);
mtd_device_register(eprom_mtd, NULL, 0);
}
- nr_parts = parse_mtd_partitions(flash_mtd, probes, &parsed_parts, 0);
-
-#ifdef CONFIG_MTD_SUPERH_RESERVE
- if (nr_parts <= 0) {
- printk(KERN_NOTICE "Using configured partition at 0x%08x.\n",
- CONFIG_MTD_SUPERH_RESERVE);
- parsed_parts = superh_se_partitions;
- nr_parts = sizeof(superh_se_partitions)/sizeof(*parsed_parts);
- }
-#endif /* CONFIG_MTD_SUPERH_RESERVE */
-
- if (nr_parts > 0)
- mtd_device_register(flash_mtd, parsed_parts, nr_parts);
- else
- mtd_device_register(flash_mtd, NULL, 0);
+ mtd_device_parse_register(flash_mtd, probes, 0,
+ superh_se_partitions, NUM_PARTITIONS);
return 0;
}
map_destroy(eprom_mtd);
}
- if (parsed_parts)
- mtd_device_unregister(flash_mtd);
- else
- mtd_device_unregister(flash_mtd);
+ mtd_device_unregister(flash_mtd);
map_destroy(flash_mtd);
}
#include <asm/immap_cpm2.h>
static struct mtd_info *sbcmtd[3];
-static struct mtd_partition *sbcmtd_parts[3];
struct map_info sbc82xx_flash_map[3] = {
{.name = "Boot flash"},
for (i=0; i<3; i++) {
int8_t flashcs[3] = { 0, 6, 1 };
int nr_parts;
+ struct mtd_partition *defparts;
printk(KERN_NOTICE "PowerQUICC II %s (%ld MiB on CS%d",
sbc82xx_flash_map[i].name,
}
printk(" at %08lx)\n", sbc82xx_flash_map[i].phys);
- sbc82xx_flash_map[i].virt = ioremap(sbc82xx_flash_map[i].phys, sbc82xx_flash_map[i].size);
+ sbc82xx_flash_map[i].virt = ioremap(sbc82xx_flash_map[i].phys,
+ sbc82xx_flash_map[i].size);
if (!sbc82xx_flash_map[i].virt) {
printk("Failed to ioremap\n");
sbcmtd[i]->owner = THIS_MODULE;
- nr_parts = parse_mtd_partitions(sbcmtd[i], part_probes,
- &sbcmtd_parts[i], 0);
- if (nr_parts > 0) {
- mtd_device_register(sbcmtd[i], sbcmtd_parts[i],
- nr_parts);
- continue;
- }
-
/* No partitioning detected. Use default */
if (i == 2) {
- mtd_device_register(sbcmtd[i], NULL, 0);
+ defparts = NULL;
+ nr_parts = 0;
} else if (i == bigflash) {
- mtd_device_register(sbcmtd[i], bigflash_parts,
- ARRAY_SIZE(bigflash_parts));
+ defparts = bigflash_parts;
+ nr_parts = ARRAY_SIZE(bigflash_parts);
} else {
- mtd_device_register(sbcmtd[i], smallflash_parts,
- ARRAY_SIZE(smallflash_parts));
+ defparts = smallflash_parts;
+ nr_parts = ARRAY_SIZE(smallflash_parts);
}
+
+ mtd_device_parse_register(sbcmtd[i], part_probes, 0,
+ defparts, nr_parts);
}
return 0;
}
if (!sbcmtd[i])
continue;
- if (i<2 || sbcmtd_parts[i])
- mtd_device_unregister(sbcmtd[i]);
- else
- mtd_device_unregister(sbcmtd[i]);
+ mtd_device_unregister(sbcmtd[i]);
- kfree(sbcmtd_parts[i]);
map_destroy(sbcmtd[i]);
iounmap((void *)sbc82xx_flash_map[i].virt);
new->rq->queuedata = new;
blk_queue_logical_block_size(new->rq, tr->blksize);
+ queue_flag_set_unlocked(QUEUE_FLAG_NONROT, new->rq);
+
if (tr->discard) {
queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, new->rq);
new->rq->limits.max_discard_sectors = UINT_MAX;
enum { STATE_EMPTY, STATE_CLEAN, STATE_DIRTY } cache_state;
};
-static struct mutex mtdblks_lock;
+static DEFINE_MUTEX(mtdblks_lock);
/*
* Cache stuff...
if (mtdblk->cache_state != STATE_DIRTY)
return 0;
- DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: writing cached data for \"%s\" "
+ pr_debug("mtdblock: writing cached data for \"%s\" "
"at 0x%lx, size 0x%x\n", mtd->name,
mtdblk->cache_offset, mtdblk->cache_size);
size_t retlen;
int ret;
- DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: write on \"%s\" at 0x%lx, size 0x%x\n",
+ pr_debug("mtdblock: write on \"%s\" at 0x%lx, size 0x%x\n",
mtd->name, pos, len);
if (!sect_size)
size_t retlen;
int ret;
- DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: read on \"%s\" at 0x%lx, size 0x%x\n",
+ pr_debug("mtdblock: read on \"%s\" at 0x%lx, size 0x%x\n",
mtd->name, pos, len);
if (!sect_size)
{
struct mtdblk_dev *mtdblk = container_of(mbd, struct mtdblk_dev, mbd);
- DEBUG(MTD_DEBUG_LEVEL1,"mtdblock_open\n");
+ pr_debug("mtdblock_open\n");
mutex_lock(&mtdblks_lock);
if (mtdblk->count) {
mutex_unlock(&mtdblks_lock);
- DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
+ pr_debug("ok\n");
return 0;
}
{
struct mtdblk_dev *mtdblk = container_of(mbd, struct mtdblk_dev, mbd);
- DEBUG(MTD_DEBUG_LEVEL1, "mtdblock_release\n");
+ pr_debug("mtdblock_release\n");
mutex_lock(&mtdblks_lock);
mutex_unlock(&mtdblks_lock);
- DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
+ pr_debug("ok\n");
return 0;
}
static int __init init_mtdblock(void)
{
- mutex_init(&mtdblks_lock);
-
return register_mtd_blktrans(&mtdblock_tr);
}
/*
* Data structure to hold the pointer to the mtd device as well
- * as mode information ofr various use cases.
+ * as mode information of various use cases.
*/
struct mtd_file_info {
struct mtd_info *mtd;
struct mtd_file_info *mfi;
struct inode *mtd_ino;
- DEBUG(MTD_DEBUG_LEVEL0, "MTD_open\n");
+ pr_debug("MTD_open\n");
/* You can't open the RO devices RW */
if ((file->f_mode & FMODE_WRITE) && (minor & 1))
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
- DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n");
+ pr_debug("MTD_close\n");
/* Only sync if opened RW */
if ((file->f_mode & FMODE_WRITE) && mtd->sync)
size_t size = count;
char *kbuf;
- DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n");
+ pr_debug("MTD_read\n");
if (*ppos + count > mtd->size)
count = mtd->size - *ppos;
len = min_t(size_t, count, size);
switch (mfi->mode) {
- case MTD_MODE_OTP_FACTORY:
+ case MTD_FILE_MODE_OTP_FACTORY:
ret = mtd->read_fact_prot_reg(mtd, *ppos, len, &retlen, kbuf);
break;
- case MTD_MODE_OTP_USER:
+ case MTD_FILE_MODE_OTP_USER:
ret = mtd->read_user_prot_reg(mtd, *ppos, len, &retlen, kbuf);
break;
- case MTD_MODE_RAW:
+ case MTD_FILE_MODE_RAW:
{
struct mtd_oob_ops ops;
- ops.mode = MTD_OOB_RAW;
+ ops.mode = MTD_OPS_RAW;
ops.datbuf = kbuf;
ops.oobbuf = NULL;
ops.len = len;
default:
ret = mtd->read(mtd, *ppos, len, &retlen, kbuf);
}
- /* Nand returns -EBADMSG on ecc errors, but it returns
+ /* Nand returns -EBADMSG on ECC errors, but it returns
* the data. For our userspace tools it is important
- * to dump areas with ecc errors !
+ * to dump areas with ECC errors!
* For kernel internal usage it also might return -EUCLEAN
* to signal the caller that a bitflip has occurred and has
* been corrected by the ECC algorithm.
* Userspace software which accesses NAND this way
* must be aware of the fact that it deals with NAND
*/
- if (!ret || (ret == -EUCLEAN) || (ret == -EBADMSG)) {
+ if (!ret || mtd_is_bitflip_or_eccerr(ret)) {
*ppos += retlen;
if (copy_to_user(buf, kbuf, retlen)) {
kfree(kbuf);
int ret=0;
int len;
- DEBUG(MTD_DEBUG_LEVEL0,"MTD_write\n");
+ pr_debug("MTD_write\n");
if (*ppos == mtd->size)
return -ENOSPC;
}
switch (mfi->mode) {
- case MTD_MODE_OTP_FACTORY:
+ case MTD_FILE_MODE_OTP_FACTORY:
ret = -EROFS;
break;
- case MTD_MODE_OTP_USER:
+ case MTD_FILE_MODE_OTP_USER:
if (!mtd->write_user_prot_reg) {
ret = -EOPNOTSUPP;
break;
ret = mtd->write_user_prot_reg(mtd, *ppos, len, &retlen, kbuf);
break;
- case MTD_MODE_RAW:
+ case MTD_FILE_MODE_RAW:
{
struct mtd_oob_ops ops;
- ops.mode = MTD_OOB_RAW;
+ ops.mode = MTD_OPS_RAW;
ops.datbuf = kbuf;
ops.oobbuf = NULL;
+ ops.ooboffs = 0;
ops.len = len;
ret = mtd->write_oob(mtd, *ppos, &ops);
if (!mtd->read_fact_prot_reg)
ret = -EOPNOTSUPP;
else
- mfi->mode = MTD_MODE_OTP_FACTORY;
+ mfi->mode = MTD_FILE_MODE_OTP_FACTORY;
break;
case MTD_OTP_USER:
if (!mtd->read_fact_prot_reg)
ret = -EOPNOTSUPP;
else
- mfi->mode = MTD_MODE_OTP_USER;
+ mfi->mode = MTD_FILE_MODE_OTP_USER;
break;
default:
ret = -EINVAL;
uint64_t start, uint32_t length, void __user *ptr,
uint32_t __user *retp)
{
+ struct mtd_file_info *mfi = file->private_data;
struct mtd_oob_ops ops;
uint32_t retlen;
int ret = 0;
return ret;
ops.ooblen = length;
- ops.ooboffs = start & (mtd->oobsize - 1);
+ ops.ooboffs = start & (mtd->writesize - 1);
ops.datbuf = NULL;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = (mfi->mode == MTD_FILE_MODE_RAW) ? MTD_OPS_RAW :
+ MTD_OPS_PLACE_OOB;
if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
return -EINVAL;
if (IS_ERR(ops.oobbuf))
return PTR_ERR(ops.oobbuf);
- start &= ~((uint64_t)mtd->oobsize - 1);
+ start &= ~((uint64_t)mtd->writesize - 1);
ret = mtd->write_oob(mtd, start, &ops);
if (ops.oobretlen > 0xFFFFFFFFU)
return ret;
}
-static int mtd_do_readoob(struct mtd_info *mtd, uint64_t start,
- uint32_t length, void __user *ptr, uint32_t __user *retp)
+static int mtd_do_readoob(struct file *file, struct mtd_info *mtd,
+ uint64_t start, uint32_t length, void __user *ptr,
+ uint32_t __user *retp)
{
+ struct mtd_file_info *mfi = file->private_data;
struct mtd_oob_ops ops;
int ret = 0;
return ret;
ops.ooblen = length;
- ops.ooboffs = start & (mtd->oobsize - 1);
+ ops.ooboffs = start & (mtd->writesize - 1);
ops.datbuf = NULL;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = (mfi->mode == MTD_FILE_MODE_RAW) ? MTD_OPS_RAW :
+ MTD_OPS_PLACE_OOB;
if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
return -EINVAL;
if (!ops.oobbuf)
return -ENOMEM;
- start &= ~((uint64_t)mtd->oobsize - 1);
+ start &= ~((uint64_t)mtd->writesize - 1);
ret = mtd->read_oob(mtd, start, &ops);
if (put_user(ops.oobretlen, retp))
ret = -EFAULT;
kfree(ops.oobbuf);
+
+ /*
+ * NAND returns -EBADMSG on ECC errors, but it returns the OOB
+ * data. For our userspace tools it is important to dump areas
+ * with ECC errors!
+ * For kernel internal usage it also might return -EUCLEAN
+ * to signal the caller that a bitflip has occured and has
+ * been corrected by the ECC algorithm.
+ *
+ * Note: currently the standard NAND function, nand_read_oob_std,
+ * does not calculate ECC for the OOB area, so do not rely on
+ * this behavior unless you have replaced it with your own.
+ */
+ if (mtd_is_bitflip_or_eccerr(ret))
+ return 0;
+
return ret;
}
/*
* Copies (and truncates, if necessary) data from the larger struct,
* nand_ecclayout, to the smaller, deprecated layout struct,
- * nand_ecclayout_user. This is necessary only to suppport the deprecated
+ * nand_ecclayout_user. This is necessary only to support the deprecated
* API ioctl ECCGETLAYOUT while allowing all new functionality to use
* nand_ecclayout flexibly (i.e. the struct may change size in new
* releases without requiring major rewrites).
}
}
+static int mtd_write_ioctl(struct mtd_info *mtd,
+ struct mtd_write_req __user *argp)
+{
+ struct mtd_write_req req;
+ struct mtd_oob_ops ops;
+ void __user *usr_data, *usr_oob;
+ int ret;
+
+ if (copy_from_user(&req, argp, sizeof(req)) ||
+ !access_ok(VERIFY_READ, req.usr_data, req.len) ||
+ !access_ok(VERIFY_READ, req.usr_oob, req.ooblen))
+ return -EFAULT;
+ if (!mtd->write_oob)
+ return -EOPNOTSUPP;
+
+ ops.mode = req.mode;
+ ops.len = (size_t)req.len;
+ ops.ooblen = (size_t)req.ooblen;
+ ops.ooboffs = 0;
+
+ usr_data = (void __user *)(uintptr_t)req.usr_data;
+ usr_oob = (void __user *)(uintptr_t)req.usr_oob;
+
+ if (req.usr_data) {
+ ops.datbuf = memdup_user(usr_data, ops.len);
+ if (IS_ERR(ops.datbuf))
+ return PTR_ERR(ops.datbuf);
+ } else {
+ ops.datbuf = NULL;
+ }
+
+ if (req.usr_oob) {
+ ops.oobbuf = memdup_user(usr_oob, ops.ooblen);
+ if (IS_ERR(ops.oobbuf)) {
+ kfree(ops.datbuf);
+ return PTR_ERR(ops.oobbuf);
+ }
+ } else {
+ ops.oobbuf = NULL;
+ }
+
+ ret = mtd->write_oob(mtd, (loff_t)req.start, &ops);
+
+ kfree(ops.datbuf);
+ kfree(ops.oobbuf);
+
+ return ret;
+}
+
static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
{
struct mtd_file_info *mfi = file->private_data;
u_long size;
struct mtd_info_user info;
- DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n");
+ pr_debug("MTD_ioctl\n");
size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
if (cmd & IOC_IN) {
info.erasesize = mtd->erasesize;
info.writesize = mtd->writesize;
info.oobsize = mtd->oobsize;
- /* The below fields are obsolete */
- info.ecctype = -1;
+ /* The below field is obsolete */
+ info.padding = 0;
if (copy_to_user(argp, &info, sizeof(struct mtd_info_user)))
return -EFAULT;
break;
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
- ret = mtd_do_readoob(mtd, buf.start, buf.length,
+ ret = mtd_do_readoob(file, mtd, buf.start, buf.length,
buf.ptr, &buf_user->start);
break;
}
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
- ret = mtd_do_readoob(mtd, buf.start, buf.length,
+ ret = mtd_do_readoob(file, mtd, buf.start, buf.length,
(void __user *)(uintptr_t)buf.usr_ptr,
&buf_user->length);
break;
}
+ case MEMWRITE:
+ {
+ ret = mtd_write_ioctl(mtd,
+ (struct mtd_write_req __user *)arg);
+ break;
+ }
+
case MEMLOCK:
{
struct erase_info_user einfo;
if (copy_from_user(&mode, argp, sizeof(int)))
return -EFAULT;
- mfi->mode = MTD_MODE_NORMAL;
+ mfi->mode = MTD_FILE_MODE_NORMAL;
ret = otp_select_filemode(mfi, mode);
return -ENOMEM;
ret = -EOPNOTSUPP;
switch (mfi->mode) {
- case MTD_MODE_OTP_FACTORY:
+ case MTD_FILE_MODE_OTP_FACTORY:
if (mtd->get_fact_prot_info)
ret = mtd->get_fact_prot_info(mtd, buf, 4096);
break;
- case MTD_MODE_OTP_USER:
+ case MTD_FILE_MODE_OTP_USER:
if (mtd->get_user_prot_info)
ret = mtd->get_user_prot_info(mtd, buf, 4096);
break;
{
struct otp_info oinfo;
- if (mfi->mode != MTD_MODE_OTP_USER)
+ if (mfi->mode != MTD_FILE_MODE_OTP_USER)
return -EINVAL;
if (copy_from_user(&oinfo, argp, sizeof(oinfo)))
return -EFAULT;
}
#endif
- /* This ioctl is being deprecated - it truncates the ecc layout */
+ /* This ioctl is being deprecated - it truncates the ECC layout */
case ECCGETLAYOUT:
{
struct nand_ecclayout_user *usrlay;
mfi->mode = 0;
switch(arg) {
- case MTD_MODE_OTP_FACTORY:
- case MTD_MODE_OTP_USER:
+ case MTD_FILE_MODE_OTP_FACTORY:
+ case MTD_FILE_MODE_OTP_USER:
ret = otp_select_filemode(mfi, arg);
break;
- case MTD_MODE_RAW:
+ case MTD_FILE_MODE_RAW:
if (!mtd->read_oob || !mtd->write_oob)
return -EOPNOTSUPP;
mfi->mode = arg;
- case MTD_MODE_NORMAL:
+ case MTD_FILE_MODE_NORMAL:
break;
default:
ret = -EINVAL;
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
- ret = mtd_do_readoob(mtd, buf.start,
+ ret = mtd_do_readoob(file, mtd, buf.start,
buf.length, compat_ptr(buf.ptr),
&buf_user->start);
break;
/* Save information about bitflips! */
if (unlikely(err)) {
- if (err == -EBADMSG) {
+ if (mtd_is_eccerr(err)) {
mtd->ecc_stats.failed++;
ret = err;
- } else if (err == -EUCLEAN) {
+ } else if (mtd_is_bitflip(err)) {
mtd->ecc_stats.corrected++;
/* Do not overwrite -EBADMSG !! */
if (!ret)
/* Save information about bitflips! */
if (unlikely(err)) {
- if (err == -EBADMSG) {
+ if (mtd_is_eccerr(err)) {
mtd->ecc_stats.failed++;
ret = err;
- } else if (err == -EUCLEAN) {
+ } else if (mtd_is_bitflip(err)) {
mtd->ecc_stats.corrected++;
/* Do not overwrite -EBADMSG !! */
if (!ret)
/*
* Set up the new "super" device's MTD object structure, check for
- * incompatibilites between the subdevices.
+ * incompatibilities between the subdevices.
*/
concat->mtd.type = subdev[0]->type;
concat->mtd.flags = subdev[0]->flags;
MTD_DEVT(i) + 1,
NULL, "mtd%dro", i);
- DEBUG(0, "mtd: Giving out device %d to %s\n", i, mtd->name);
+ pr_debug("mtd: Giving out device %d to %s\n", i, mtd->name);
/* No need to get a refcount on the module containing
the notifier, since we hold the mtd_table_mutex */
list_for_each_entry(not, &mtd_notifiers, list)
}
/**
- * mtd_device_register - register an MTD device.
+ * mtd_device_parse_register - parse partitions and register an MTD device.
*
- * @master: the MTD device to register
- * @parts: the partitions to register - only valid if nr_parts > 0
- * @nr_parts: the number of partitions in parts. If zero then the full MTD
- * device is registered
+ * @mtd: the MTD device to register
+ * @types: the list of MTD partition probes to try, see
+ * 'parse_mtd_partitions()' for more information
+ * @parser_data: MTD partition parser-specific data
+ * @parts: fallback partition information to register, if parsing fails;
+ * only valid if %nr_parts > %0
+ * @nr_parts: the number of partitions in parts, if zero then the full
+ * MTD device is registered if no partition info is found
*
- * Register an MTD device with the system and optionally, a number of
- * partitions. If nr_parts is 0 then the whole device is registered, otherwise
- * only the partitions are registered. To register both the full device *and*
- * the partitions, call mtd_device_register() twice, once with nr_parts == 0
- * and once equal to the number of partitions.
+ * This function aggregates MTD partitions parsing (done by
+ * 'parse_mtd_partitions()') and MTD device and partitions registering. It
+ * basically follows the most common pattern found in many MTD drivers:
+ *
+ * * It first tries to probe partitions on MTD device @mtd using parsers
+ * specified in @types (if @types is %NULL, then the default list of parsers
+ * is used, see 'parse_mtd_partitions()' for more information). If none are
+ * found this functions tries to fallback to information specified in
+ * @parts/@nr_parts.
+ * * If any partitioning info was found, this function registers the found
+ * partitions.
+ * * If no partitions were found this function just registers the MTD device
+ * @mtd and exits.
+ *
+ * Returns zero in case of success and a negative error code in case of failure.
*/
-int mtd_device_register(struct mtd_info *master,
- const struct mtd_partition *parts,
- int nr_parts)
+int mtd_device_parse_register(struct mtd_info *mtd, const char **types,
+ struct mtd_part_parser_data *parser_data,
+ const struct mtd_partition *parts,
+ int nr_parts)
{
- return parts ? add_mtd_partitions(master, parts, nr_parts) :
- add_mtd_device(master);
+ int err;
+ struct mtd_partition *real_parts;
+
+ err = parse_mtd_partitions(mtd, types, &real_parts, parser_data);
+ if (err <= 0 && nr_parts && parts) {
+ real_parts = kmemdup(parts, sizeof(*parts) * nr_parts,
+ GFP_KERNEL);
+ if (!real_parts)
+ err = -ENOMEM;
+ else
+ err = nr_parts;
+ }
+
+ if (err > 0) {
+ err = add_mtd_partitions(mtd, real_parts, err);
+ kfree(real_parts);
+ } else if (err == 0) {
+ err = add_mtd_device(mtd);
+ if (err == 1)
+ err = -ENODEV;
+ }
+
+ return err;
}
-EXPORT_SYMBOL_GPL(mtd_device_register);
+EXPORT_SYMBOL_GPL(mtd_device_parse_register);
/**
* mtd_device_unregister - unregister an existing MTD device.
extern int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *,
int);
extern int del_mtd_partitions(struct mtd_info *);
+extern int parse_mtd_partitions(struct mtd_info *master, const char **types,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data);
#define mtd_for_each_device(mtd) \
for ((mtd) = __mtd_next_device(0); \
ret = mtd->read(mtd, page * record_size, MTDOOPS_HEADER_SIZE,
&retlen, (u_char *) &count[0]);
if (retlen != MTDOOPS_HEADER_SIZE ||
- (ret < 0 && ret != -EUCLEAN)) {
+ (ret < 0 && !mtd_is_bitflip(ret))) {
printk(KERN_ERR "mtdoops: read failure at %ld (%td of %d read), err %d\n",
page * record_size, retlen,
MTDOOPS_HEADER_SIZE, ret);
res = part->master->read(part->master, from + part->offset,
len, retlen, buf);
if (unlikely(res)) {
- if (res == -EUCLEAN)
+ if (mtd_is_bitflip(res))
mtd->ecc_stats.corrected += part->master->ecc_stats.corrected - stats.corrected;
- if (res == -EBADMSG)
+ if (mtd_is_eccerr(res))
mtd->ecc_stats.failed += part->master->ecc_stats.failed - stats.failed;
}
return res;
if (ops->oobbuf) {
size_t len, pages;
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
len = mtd->oobavail;
else
len = mtd->oobsize;
res = part->master->read_oob(part->master, from + part->offset, ops);
if (unlikely(res)) {
- if (res == -EUCLEAN)
+ if (mtd_is_bitflip(res))
mtd->ecc_stats.corrected++;
- if (res == -EBADMSG)
+ if (mtd_is_eccerr(res))
mtd->ecc_stats.failed++;
}
return res;
(unsigned long long)cur_offset, (unsigned long long)slave->offset);
}
}
+ if (slave->offset == MTDPART_OFS_RETAIN) {
+ slave->offset = cur_offset;
+ if (master->size - slave->offset >= slave->mtd.size) {
+ slave->mtd.size = master->size - slave->offset
+ - slave->mtd.size;
+ } else {
+ printk(KERN_ERR "mtd partition \"%s\" doesn't have enough space: %#llx < %#llx, disabled\n",
+ part->name, master->size - slave->offset,
+ slave->mtd.size);
+ /* register to preserve ordering */
+ goto out_register;
+ }
+ }
if (slave->mtd.size == MTDPART_SIZ_FULL)
slave->mtd.size = master->size - slave->offset;
return ret;
}
+#define put_partition_parser(p) do { module_put((p)->owner); } while (0)
+
int register_mtd_parser(struct mtd_part_parser *p)
{
spin_lock(&part_parser_lock);
}
EXPORT_SYMBOL_GPL(deregister_mtd_parser);
+/*
+ * Do not forget to update 'parse_mtd_partitions()' kerneldoc comment if you
+ * are changing this array!
+ */
+static const char *default_mtd_part_types[] = {
+ "cmdlinepart",
+ "ofpart",
+ NULL
+};
+
+/**
+ * parse_mtd_partitions - parse MTD partitions
+ * @master: the master partition (describes whole MTD device)
+ * @types: names of partition parsers to try or %NULL
+ * @pparts: array of partitions found is returned here
+ * @data: MTD partition parser-specific data
+ *
+ * This function tries to find partition on MTD device @master. It uses MTD
+ * partition parsers, specified in @types. However, if @types is %NULL, then
+ * the default list of parsers is used. The default list contains only the
+ * "cmdlinepart" and "ofpart" parsers ATM.
+ *
+ * This function may return:
+ * o a negative error code in case of failure
+ * o zero if no partitions were found
+ * o a positive number of found partitions, in which case on exit @pparts will
+ * point to an array containing this number of &struct mtd_info objects.
+ */
int parse_mtd_partitions(struct mtd_info *master, const char **types,
- struct mtd_partition **pparts, unsigned long origin)
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
{
struct mtd_part_parser *parser;
int ret = 0;
+ if (!types)
+ types = default_mtd_part_types;
+
for ( ; ret <= 0 && *types; types++) {
parser = get_partition_parser(*types);
if (!parser && !request_module("%s", *types))
parser = get_partition_parser(*types);
if (!parser)
continue;
- ret = (*parser->parse_fn)(master, pparts, origin);
+ ret = (*parser->parse_fn)(master, pparts, data);
if (ret > 0) {
printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n",
ret, parser->name, master->name);
}
return ret;
}
-EXPORT_SYMBOL_GPL(parse_mtd_partitions);
int mtd_is_partition(struct mtd_info *mtd)
{
struct mtd_info *mtd = _mtd;
if (sb->s_mtd == mtd) {
- DEBUG(2, "MTDSB: Match on device %d (\"%s\")\n",
+ pr_debug("MTDSB: Match on device %d (\"%s\")\n",
mtd->index, mtd->name);
return 1;
}
- DEBUG(2, "MTDSB: No match, device %d (\"%s\"), device %d (\"%s\")\n",
+ pr_debug("MTDSB: No match, device %d (\"%s\"), device %d (\"%s\")\n",
sb->s_mtd->index, sb->s_mtd->name, mtd->index, mtd->name);
return 0;
}
goto already_mounted;
/* fresh new superblock */
- DEBUG(1, "MTDSB: New superblock for device %d (\"%s\")\n",
+ pr_debug("MTDSB: New superblock for device %d (\"%s\")\n",
mtd->index, mtd->name);
sb->s_flags = flags;
/* new mountpoint for an already mounted superblock */
already_mounted:
- DEBUG(1, "MTDSB: Device %d (\"%s\") is already mounted\n",
+ pr_debug("MTDSB: Device %d (\"%s\") is already mounted\n",
mtd->index, mtd->name);
put_mtd_device(mtd);
return dget(sb->s_root);
mtd = get_mtd_device(NULL, mtdnr);
if (IS_ERR(mtd)) {
- DEBUG(0, "MTDSB: Device #%u doesn't appear to exist\n", mtdnr);
+ pr_debug("MTDSB: Device #%u doesn't appear to exist\n", mtdnr);
return ERR_CAST(mtd);
}
if (!dev_name)
return ERR_PTR(-EINVAL);
- DEBUG(2, "MTDSB: dev_name \"%s\"\n", dev_name);
+ pr_debug("MTDSB: dev_name \"%s\"\n", dev_name);
/* the preferred way of mounting in future; especially when
* CONFIG_BLOCK=n - we specify the underlying MTD device by number or
struct mtd_info *mtd;
/* mount by MTD device name */
- DEBUG(1, "MTDSB: mtd:%%s, name \"%s\"\n",
+ pr_debug("MTDSB: mtd:%%s, name \"%s\"\n",
dev_name + 4);
mtd = get_mtd_device_nm(dev_name + 4);
mtdnr = simple_strtoul(dev_name + 3, &endptr, 0);
if (!*endptr) {
/* It was a valid number */
- DEBUG(1, "MTDSB: mtd%%d, mtdnr %d\n",
+ pr_debug("MTDSB: mtd%%d, mtdnr %d\n",
mtdnr);
return mount_mtd_nr(fs_type, flags,
dev_name, data,
bdev = lookup_bdev(dev_name);
if (IS_ERR(bdev)) {
ret = PTR_ERR(bdev);
- DEBUG(1, "MTDSB: lookup_bdev() returned %d\n", ret);
+ pr_debug("MTDSB: lookup_bdev() returned %d\n", ret);
return ERR_PTR(ret);
}
- DEBUG(1, "MTDSB: lookup_bdev() returned 0\n");
+ pr_debug("MTDSB: lookup_bdev() returned 0\n");
ret = -EINVAL;
unsigned int flags;
unsigned int active_count;
unsigned int erase_count;
- unsigned int pad; /* speeds up pointer decremtnt */
+ unsigned int pad; /* speeds up pointer decrement */
};
#define MTDSWAP_ECNT_MIN(rbroot) (rb_entry(rb_first(rbroot), struct swap_eb, \
{
int ret = d->mtd->read_oob(d->mtd, from, ops);
- if (ret == -EUCLEAN)
+ if (mtd_is_bitflip(ret))
return ret;
if (ret) {
ops.oobbuf = d->oob_buf;
ops.ooboffs = 0;
ops.datbuf = NULL;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ret = mtdswap_read_oob(d, offset, &ops);
- if (ret && ret != -EUCLEAN)
+ if (ret && !mtd_is_bitflip(ret))
return ret;
data = (struct mtdswap_oobdata *)d->oob_buf;
if (le16_to_cpu(data->magic) == MTDSWAP_MAGIC_CLEAN) {
eb->erase_count = le32_to_cpu(data->count);
- if (ret == -EUCLEAN)
+ if (mtd_is_bitflip(ret))
ret = MTDSWAP_SCANNED_BITFLIP;
else {
if (le16_to_cpu(data2->magic) == MTDSWAP_MAGIC_DIRTY)
ops.ooboffs = 0;
ops.oobbuf = (uint8_t *)&n;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.datbuf = NULL;
if (marker == MTDSWAP_TYPE_CLEAN) {
if (ret) {
dev_warn(d->dev, "Write OOB failed for block at %08llx "
"error %d\n", offset, ret);
- if (ret == -EIO || ret == -EBADMSG)
+ if (ret == -EIO || mtd_is_eccerr(ret))
mtdswap_handle_write_error(d, eb);
return ret;
}
TREE_COUNT(d, CLEAN)--;
ret = mtdswap_write_marker(d, eb, MTDSWAP_TYPE_DIRTY);
- } while (ret == -EIO || ret == -EBADMSG);
+ } while (ret == -EIO || mtd_is_eccerr(ret));
if (ret)
return ret;
ret = mtdswap_map_free_block(d, page, bp);
eb = d->eb_data + (*bp / d->pages_per_eblk);
- if (ret == -EIO || ret == -EBADMSG) {
+ if (ret == -EIO || mtd_is_eccerr(ret)) {
d->curr_write = NULL;
eb->active_count--;
d->revmap[*bp] = PAGE_UNDEF;
writepos = (loff_t)*bp << PAGE_SHIFT;
ret = mtd->write(mtd, writepos, PAGE_SIZE, &retlen, buf);
- if (ret == -EIO || ret == -EBADMSG) {
+ if (ret == -EIO || mtd_is_eccerr(ret)) {
d->curr_write_pos--;
eb->active_count--;
d->revmap[*bp] = PAGE_UNDEF;
retry:
ret = mtd->read(mtd, readpos, PAGE_SIZE, &retlen, d->page_buf);
- if (ret < 0 && ret != -EUCLEAN) {
+ if (ret < 0 && !mtd_is_bitflip(ret)) {
oldeb = d->eb_data + oldblock / d->pages_per_eblk;
oldeb->flags |= EBLOCK_READERR;
struct mtd_oob_ops ops;
int ret;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = mtd->writesize;
ops.ooblen = mtd->ecclayout->oobavail;
ops.ooboffs = 0;
if (ret == 0)
mtdswap_rb_add(d, eb, MTDSWAP_CLEAN);
- else if (ret != -EIO && ret != -EBADMSG)
+ else if (ret != -EIO && !mtd_is_eccerr(ret))
mtdswap_rb_add(d, eb, MTDSWAP_DIRTY);
return 0;
ret = mtd->read(mtd, readpos, PAGE_SIZE, &retlen, buf);
d->mtd_read_count++;
- if (ret == -EUCLEAN) {
+ if (mtd_is_bitflip(ret)) {
eb->flags |= EBLOCK_BITFLIP;
mtdswap_rb_add(d, eb, MTDSWAP_BITFLIP);
ret = 0;
goto revmap_fail;
eblk_bytes = sizeof(struct swap_eb)*d->eblks;
- d->eb_data = vmalloc(eblk_bytes);
+ d->eb_data = vzalloc(eblk_bytes);
if (!d->eb_data)
goto eb_data_fail;
- memset(d->eb_data, 0, eblk_bytes);
for (i = 0; i < pages; i++)
d->page_data[i] = BLOCK_UNDEF;
scratch register here to enable this feature. On Intel Moorestown
boards, the scratch register is at 0xFF108018.
-config MTD_NAND_EDB7312
- tristate "Support for Cirrus Logic EBD7312 evaluation board"
- depends on ARCH_EDB7312
- help
- This enables the driver for the Cirrus Logic EBD7312 evaluation
- board to access the onboard NAND Flash.
-
config MTD_NAND_H1900
tristate "iPAQ H1900 flash"
- depends on ARCH_PXA
+ depends on ARCH_PXA && BROKEN
help
This enables the driver for the iPAQ h1900 flash.
Support for NAND flash on Amstrad E3 (Delta).
config MTD_NAND_OMAP2
- tristate "NAND Flash device on OMAP2 and OMAP3"
- depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3)
+ tristate "NAND Flash device on OMAP2, OMAP3 and OMAP4"
+ depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4)
help
- Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
+ Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
+ platforms.
config MTD_NAND_IDS
tristate
The simulator may simulate various NAND flash chips for the
MTD nand layer.
+config MTD_NAND_GPMI_NAND
+ bool "GPMI NAND Flash Controller driver"
+ depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
+ select MTD_PARTITIONS
+ select MTD_CMDLINE_PARTS
+ help
+ Enables NAND Flash support for IMX23 or IMX28.
+ The GPMI controller is very powerful, with the help of BCH
+ module, it can do the hardware ECC. The GPMI supports several
+ NAND flashs at the same time. The GPMI may conflicts with other
+ block, such as SD card. So pay attention to it when you enable
+ the GPMI.
+
config MTD_NAND_PLATFORM
tristate "Support for generic platform NAND driver"
help
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
obj-$(CONFIG_MTD_NAND_DENALI) += denali.o
-obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
nand-objs := nand_base.o nand_bbt.o
!!host->board->rdy_pin_active_low;
}
-/*
- * Minimal-overhead PIO for data access.
- */
-static void atmel_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
-{
- struct nand_chip *nand_chip = mtd->priv;
-
- __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
-}
-
-static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
-{
- struct nand_chip *nand_chip = mtd->priv;
-
- __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
-}
-
-static void atmel_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
-{
- struct nand_chip *nand_chip = mtd->priv;
-
- __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
-}
-
-static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
-{
- struct nand_chip *nand_chip = mtd->priv;
-
- __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
-}
-
static void dma_complete_func(void *completion)
{
complete(completion);
static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
- struct atmel_nand_host *host = chip->priv;
if (use_dma && len > mtd->oobsize)
/* only use DMA for bigger than oob size: better performances */
if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
return;
- if (host->board->bus_width_16)
- atmel_read_buf16(mtd, buf, len);
- else
- atmel_read_buf8(mtd, buf, len);
+ /* if no DMA operation possible, use PIO */
+ memcpy_fromio(buf, chip->IO_ADDR_R, len);
}
static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
- struct atmel_nand_host *host = chip->priv;
if (use_dma && len > mtd->oobsize)
/* only use DMA for bigger than oob size: better performances */
if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
return;
- if (host->board->bus_width_16)
- atmel_write_buf16(mtd, buf, len);
- else
- atmel_write_buf8(mtd, buf, len);
+ /* if no DMA operation possible, use PIO */
+ memcpy_toio(chip->IO_ADDR_W, buf, len);
}
/*
}
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
-
/*
* Probe for the NAND device.
*/
struct resource *regs;
struct resource *mem;
int res;
- struct mtd_partition *partitions = NULL;
- int num_partitions = 0;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
if (on_flash_bbt) {
printk(KERN_INFO "atmel_nand: Use On Flash BBT\n");
- nand_chip->options |= NAND_USE_FLASH_BBT;
+ nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
}
if (!cpu_has_dma())
dma_cap_zero(mask);
dma_cap_set(DMA_MEMCPY, mask);
- host->dma_chan = dma_request_channel(mask, 0, NULL);
+ host->dma_chan = dma_request_channel(mask, NULL, NULL);
if (!host->dma_chan) {
dev_err(host->dev, "Failed to request DMA channel\n");
use_dma = 0;
goto err_scan_tail;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
mtd->name = "atmel_nand";
- num_partitions = parse_mtd_partitions(mtd, part_probes,
- &partitions, 0);
-#endif
- if (num_partitions <= 0 && host->board->partition_info)
- partitions = host->board->partition_info(mtd->size,
- &num_partitions);
-
- if ((!partitions) || (num_partitions == 0)) {
- printk(KERN_ERR "atmel_nand: No partitions defined, or unsupported device.\n");
- res = -ENXIO;
- goto err_no_partitions;
- }
-
- res = mtd_device_register(mtd, partitions, num_partitions);
+ res = mtd_device_parse_register(mtd, NULL, 0,
+ host->board->parts, host->board->num_parts);
if (!res)
return res;
-err_no_partitions:
- nand_release(mtd);
err_scan_tail:
err_scan_ident:
err_no_card:
* au_read_byte - read one byte from the chip
* @mtd: MTD device structure
*
- * read function for 8bit buswith
+ * read function for 8bit buswidth
*/
static u_char au_read_byte(struct mtd_info *mtd)
{
* @mtd: MTD device structure
* @byte: pointer to data byte to write
*
- * write function for 8it buswith
+ * write function for 8it buswidth
*/
static void au_write_byte(struct mtd_info *mtd, u_char byte)
{
}
/**
- * au_read_byte16 - read one byte endianess aware from the chip
+ * au_read_byte16 - read one byte endianness aware from the chip
* @mtd: MTD device structure
*
- * read function for 16bit buswith with
- * endianess conversion
+ * read function for 16bit buswidth with endianness conversion
*/
static u_char au_read_byte16(struct mtd_info *mtd)
{
}
/**
- * au_write_byte16 - write one byte endianess aware to the chip
+ * au_write_byte16 - write one byte endianness aware to the chip
* @mtd: MTD device structure
* @byte: pointer to data byte to write
*
- * write function for 16bit buswith with
- * endianess conversion
+ * write function for 16bit buswidth with endianness conversion
*/
static void au_write_byte16(struct mtd_info *mtd, u_char byte)
{
* au_read_word - read one word from the chip
* @mtd: MTD device structure
*
- * read function for 16bit buswith without
- * endianess conversion
+ * read function for 16bit buswidth without endianness conversion
*/
static u16 au_read_word(struct mtd_info *mtd)
{
* @buf: data buffer
* @len: number of bytes to write
*
- * write function for 8bit buswith
+ * write function for 8bit buswidth
*/
static void au_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
* @buf: buffer to store date
* @len: number of bytes to read
*
- * read function for 8bit buswith
+ * read function for 8bit buswidth
*/
static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
* @buf: buffer containing the data to compare
* @len: number of bytes to compare
*
- * verify function for 8bit buswith
+ * verify function for 8bit buswidth
*/
static int au_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
* @buf: data buffer
* @len: number of bytes to write
*
- * write function for 16bit buswith
+ * write function for 16bit buswidth
*/
static void au_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
{
* @buf: buffer to store date
* @len: number of bytes to read
*
- * read function for 16bit buswith
+ * read function for 16bit buswidth
*/
static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
{
* @buf: buffer containing the data to compare
* @len: number of bytes to compare
*
- * verify function for 16bit buswith
+ * verify function for 16bit buswidth
*/
static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
{
/* Enable the following for a flash based bad block table */
/*
- this->options = NAND_USE_FLASH_BBT;
+ this->bbt_options = NAND_BBT_USE_FLASH;
*/
- this->options = NAND_USE_FLASH_BBT;
+ this->bbt_options = NAND_BBT_USE_FLASH;
/* Scan to find existence of the device */
if (nand_scan(autcpu12_mtd, 1)) {
static const __devinitconst char gBanner[] = KERN_INFO \
"BCM UMI MTD NAND Driver: 1.00\n";
-const char *part_probes[] = { "cmdlinepart", NULL };
-
#if NAND_ECC_BCH
static uint8_t scan_ff_pattern[] = { 0xff };
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!r)
- return -ENXIO;
+ if (!r) {
+ err = -ENXIO;
+ goto out_free;
+ }
/* map physical address */
bcm_umi_io_base = ioremap(r->start, resource_size(r));
if (!bcm_umi_io_base) {
printk(KERN_ERR "ioremap to access BCM UMI NAND chip failed\n");
- kfree(board_mtd);
- return -EIO;
+ err = -EIO;
+ goto out_free;
}
/* Get pointer to private data */
/* Initialize the NAND hardware. */
if (bcm_umi_nand_inithw() < 0) {
printk(KERN_ERR "BCM UMI NAND chip could not be initialized\n");
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return -EIO;
+ err = -EIO;
+ goto out_unmap;
}
/* Set address of NAND IO lines */
#if USE_DMA
err = nand_dma_init();
if (err != 0)
- return err;
+ goto out_unmap;
#endif
/* Figure out the size of the device that we have.
err = nand_scan_ident(board_mtd, 1, NULL);
if (err) {
printk(KERN_ERR "nand_scan failed: %d\n", err);
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return err;
+ goto out_unmap;
}
/* Now that we know the nand size, we can setup the ECC layout */
{
printk(KERN_ERR "NAND - Unrecognized pagesize: %d\n",
board_mtd->writesize);
- return -EINVAL;
+ err = -EINVAL;
+ goto out_unmap;
}
}
#if NAND_ECC_BCH
if (board_mtd->writesize > 512) {
- if (this->options & NAND_USE_FLASH_BBT)
+ if (this->bbt_options & NAND_BBT_USE_FLASH)
largepage_bbt.options = NAND_BBT_SCAN2NDPAGE;
this->badblock_pattern = &largepage_bbt;
}
err = nand_scan_tail(board_mtd);
if (err) {
printk(KERN_ERR "nand_scan failed: %d\n", err);
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return err;
+ goto out_unmap;
}
/* Register the partitions */
- {
- int nr_partitions;
- struct mtd_partition *partition_info;
-
- board_mtd->name = "bcm_umi-nand";
- nr_partitions =
- parse_mtd_partitions(board_mtd, part_probes,
- &partition_info, 0);
-
- if (nr_partitions <= 0) {
- printk(KERN_ERR "BCM UMI NAND: Too few partitions - %d\n",
- nr_partitions);
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return -EIO;
- }
- mtd_device_register(board_mtd, partition_info, nr_partitions);
- }
+ board_mtd->name = "bcm_umi-nand";
+ mtd_device_parse_register(board_mtd, NULL, 0, NULL, 0);
/* Return happy */
return 0;
+out_unmap:
+ iounmap(bcm_umi_io_base);
+out_free:
+ kfree(board_mtd);
+ return err;
}
static int bcm_umi_nand_remove(struct platform_device *pdev)
struct cafe_priv {
struct nand_chip nand;
- struct mtd_partition *parts;
struct pci_dev *pdev;
void __iomem *mmio;
struct rs_control *rs;
return 1;
}
/**
- * cafe_nand_read_page_syndrome - {REPLACABLE] hardware ecc syndrom based page read
+ * cafe_nand_read_page_syndrome - [REPLACEABLE] hardware ecc syndrome based page read
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
struct cafe_priv *cafe;
uint32_t ctrl;
int err = 0;
- struct mtd_partition *parts;
- int nr_parts;
/* Very old versions shared the same PCI ident for all three
functions on the chip. Verify the class too... */
cafe->nand.chip_delay = 0;
/* Enable the following for a flash based bad block table */
- cafe->nand.options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
+ cafe->nand.bbt_options = NAND_BBT_USE_FLASH;
+ cafe->nand.options = NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
if (skipbbt) {
cafe->nand.options |= NAND_SKIP_BBTSCAN;
pci_set_drvdata(pdev, mtd);
- /* We register the whole device first, separate from the partitions */
- mtd_device_register(mtd, NULL, 0);
-
-#ifdef CONFIG_MTD_CMDLINE_PARTS
mtd->name = "cafe_nand";
-#endif
- nr_parts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
- if (nr_parts > 0) {
- cafe->parts = parts;
- dev_info(&cafe->pdev->dev, "%d partitions found\n", nr_parts);
- mtd_device_register(mtd, parts, nr_parts);
- }
+ mtd_device_parse_register(mtd, part_probes, 0, NULL, 0);
+
goto out;
out_irq:
};
#define NUM_PARTITIONS (ARRAY_SIZE(partition_info))
-const char *part_probes[] = { "cmdlinepart", NULL };
-
static u_char cmx270_read_byte(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
static int __init cmx270_init(void)
{
struct nand_chip *this;
- const char *part_type;
- struct mtd_partition *mtd_parts;
- int mtd_parts_nb = 0;
int ret;
if (!(machine_is_armcore() && cpu_is_pxa27x()))
goto err_scan;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- mtd_parts_nb = parse_mtd_partitions(cmx270_nand_mtd, part_probes,
- &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-#endif
- if (!mtd_parts_nb) {
- mtd_parts = partition_info;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
-
/* Register the partitions */
- pr_notice("Using %s partition definition\n", part_type);
- ret = mtd_device_register(cmx270_nand_mtd, mtd_parts, mtd_parts_nb);
+ ret = mtd_device_parse_register(cmx270_nand_mtd, NULL, 0,
+ partition_info, NUM_PARTITIONS);
if (ret)
goto err_scan;
this->ecc.correct = nand_correct_data;
/* Enable the following for a flash based bad block table */
- this->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
+ this->bbt_options = NAND_BBT_USE_FLASH;
+ this->options = NAND_NO_AUTOINCR;
/* Scan to find existence of the device */
if (nand_scan(new_mtd, 1)) {
return 0;
}
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
static int __init cs553x_init(void)
{
int err = -ENXIO;
int i;
uint64_t val;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = NULL;
/* If the CPU isn't a Geode GX or LX, abort */
if (!is_geode())
do mtdconcat etc. if we want to. */
for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
if (cs553x_mtd[i]) {
-
/* If any devices registered, return success. Else the last error. */
- mtd_parts_nb = parse_mtd_partitions(cs553x_mtd[i], part_probes, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- printk(KERN_NOTICE "Using command line partition definition\n");
- mtd_device_register(cs553x_mtd[i], mtd_parts,
- mtd_parts_nb);
+ mtd_device_parse_register(cs553x_mtd[i], NULL, 0,
+ NULL, 0);
err = 0;
}
}
struct device *dev;
struct clk *clk;
- bool partitioned;
bool is_readmode;
int ret;
uint32_t val;
nand_ecc_modes_t ecc_mode;
- struct mtd_partition *mtd_parts = NULL;
- int mtd_parts_nb = 0;
/* insist on board-specific configuration */
if (!pdata)
info->chip.chip_delay = 0;
info->chip.select_chip = nand_davinci_select_chip;
- /* options such as NAND_USE_FLASH_BBT or 16-bit widths */
+ /* options such as NAND_BBT_USE_FLASH */
+ info->chip.bbt_options = pdata->bbt_options;
+ /* options such as 16-bit widths */
info->chip.options = pdata->options;
info->chip.bbt_td = pdata->bbt_td;
info->chip.bbt_md = pdata->bbt_md;
if (ret < 0)
goto err_scan;
- if (mtd_has_cmdlinepart()) {
- static const char *probes[] __initconst = {
- "cmdlinepart", NULL
- };
-
- mtd_parts_nb = parse_mtd_partitions(&info->mtd, probes,
- &mtd_parts, 0);
- }
-
- if (mtd_parts_nb <= 0) {
- mtd_parts = pdata->parts;
- mtd_parts_nb = pdata->nr_parts;
- }
-
- /* Register any partitions */
- if (mtd_parts_nb > 0) {
- ret = mtd_device_register(&info->mtd, mtd_parts,
- mtd_parts_nb);
- if (ret == 0)
- info->partitioned = true;
- }
-
- /* If there's no partition info, just package the whole chip
- * as a single MTD device.
- */
- if (!info->partitioned)
- ret = mtd_device_register(&info->mtd, NULL, 0) ? -ENODEV : 0;
+ ret = mtd_device_parse_register(&info->mtd, NULL, 0,
+ pdata->parts, pdata->nr_parts);
if (ret < 0)
goto err_scan;
static int __exit nand_davinci_remove(struct platform_device *pdev)
{
struct davinci_nand_info *info = platform_get_drvdata(pdev);
- int status;
-
- status = mtd_device_unregister(&info->mtd);
spin_lock_irq(&davinci_nand_lock);
if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
* */
denali->bbtskipbytes = ioread32(denali->flash_reg +
SPARE_AREA_SKIP_BYTES);
+ detect_max_banks(denali);
denali_nand_reset(denali);
iowrite32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
iowrite32(CHIP_EN_DONT_CARE__FLAG,
/* Should set value for these registers when init */
iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES);
iowrite32(1, denali->flash_reg + ECC_ENABLE);
- detect_max_banks(denali);
denali_nand_timing_set(denali);
denali_irq_init(denali);
}
denali->nand.bbt_md = &bbt_mirror_descr;
/* skip the scan for now until we have OOB read and write support */
- denali->nand.options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
+ denali->nand.bbt_options |= NAND_BBT_USE_FLASH;
+ denali->nand.options |= NAND_SKIP_BBTSCAN;
denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
/* Denali Controller only support 15bit and 8bit ECC in MRST,
struct denali_nand_info *denali = pci_get_drvdata(dev);
nand_release(&denali->mtd);
- mtd_device_unregister(&denali->mtd);
denali_irq_cleanup(dev->irq, denali);
/*
* The HW decoder in the DoC ASIC's provides us a error syndrome,
- * which we must convert to a standard syndrom usable by the generic
+ * which we must convert to a standard syndrome usable by the generic
* Reed-Solomon library code.
*
* Fabrice Bellard figured this out in the old docecc code. I added
ds[3] = ((ecc[3] & 0xc0) >> 6) | ((ecc[0] & 0xff) << 2);
parity = ecc[1];
- /* Initialize the syndrom buffer */
+ /* Initialize the syndrome buffer */
for (i = 0; i < NROOTS; i++)
s[i] = ds[0];
/*
WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
else
WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
- if (no_ecc_failures && (ret == -EBADMSG)) {
+ if (no_ecc_failures && mtd_is_eccerr(ret)) {
printk(KERN_ERR "suppressing ECC failure\n");
ret = 0;
}
nand->ecc.mode = NAND_ECC_HW_SYNDROME;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
- nand->options = NAND_USE_FLASH_BBT;
+ nand->bbt_options = NAND_BBT_USE_FLASH;
doc->physadr = physadr;
doc->virtadr = virtadr;
+++ /dev/null
-/*
- * drivers/mtd/nand/edb7312.c
- *
- * Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
- *
- * Derived from drivers/mtd/nand/autcpu12.c
- * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Overview:
- * This is a device driver for the NAND flash device found on the
- * CLEP7312 board which utilizes the Toshiba TC58V64AFT part. This is
- * a 64Mibit (8MiB x 8 bits) NAND flash device.
- */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <mach/hardware.h> /* for CLPS7111_VIRT_BASE */
-#include <asm/sizes.h>
-#include <asm/hardware/clps7111.h>
-
-/*
- * MTD structure for EDB7312 board
- */
-static struct mtd_info *ep7312_mtd = NULL;
-
-/*
- * Values specific to the EDB7312 board (used with EP7312 processor)
- */
-#define EP7312_FIO_PBASE 0x10000000 /* Phys address of flash */
-#define EP7312_PXDR 0x0001 /*
- * IO offset to Port B data register
- * where the CLE, ALE and NCE pins
- * are wired to.
- */
-#define EP7312_PXDDR 0x0041 /*
- * IO offset to Port B data direction
- * register so we can control the IO
- * lines.
- */
-
-/*
- * Module stuff
- */
-
-static unsigned long ep7312_fio_pbase = EP7312_FIO_PBASE;
-static void __iomem *ep7312_pxdr = (void __iomem *)EP7312_PXDR;
-static void __iomem *ep7312_pxddr = (void __iomem *)EP7312_PXDDR;
-
-/*
- * Define static partitions for flash device
- */
-static struct mtd_partition partition_info[] = {
- {.name = "EP7312 Nand Flash",
- .offset = 0,
- .size = 8 * 1024 * 1024}
-};
-
-#define NUM_PARTITIONS 1
-
-/*
- * hardware specific access to control-lines
- *
- * NAND_NCE: bit 0 -> bit 6 (bit 7 = 1)
- * NAND_CLE: bit 1 -> bit 4
- * NAND_ALE: bit 2 -> bit 5
- */
-static void ep7312_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- unsigned char bits = 0x80;
-
- bits |= (ctrl & (NAND_CLE | NAND_ALE)) << 3;
- bits |= (ctrl & NAND_NCE) ? 0x00 : 0x40;
-
- clps_writeb((clps_readb(ep7312_pxdr) & 0xF0) | bits,
- ep7312_pxdr);
- }
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, chip->IO_ADDR_W);
-}
-
-/*
- * read device ready pin
- */
-static int ep7312_device_ready(struct mtd_info *mtd)
-{
- return 1;
-}
-
-const char *part_probes[] = { "cmdlinepart", NULL };
-
-/*
- * Main initialization routine
- */
-static int __init ep7312_init(void)
-{
- struct nand_chip *this;
- const char *part_type = 0;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = 0;
- void __iomem *ep7312_fio_base;
-
- /* Allocate memory for MTD device structure and private data */
- ep7312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
- if (!ep7312_mtd) {
- printk("Unable to allocate EDB7312 NAND MTD device structure.\n");
- return -ENOMEM;
- }
-
- /* map physical address */
- ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K);
- if (!ep7312_fio_base) {
- printk("ioremap EDB7312 NAND flash failed\n");
- kfree(ep7312_mtd);
- return -EIO;
- }
-
- /* Get pointer to private data */
- this = (struct nand_chip *)(&ep7312_mtd[1]);
-
- /* Initialize structures */
- memset(ep7312_mtd, 0, sizeof(struct mtd_info));
- memset(this, 0, sizeof(struct nand_chip));
-
- /* Link the private data with the MTD structure */
- ep7312_mtd->priv = this;
- ep7312_mtd->owner = THIS_MODULE;
-
- /*
- * Set GPIO Port B control register so that the pins are configured
- * to be outputs for controlling the NAND flash.
- */
- clps_writeb(0xf0, ep7312_pxddr);
-
- /* insert callbacks */
- this->IO_ADDR_R = ep7312_fio_base;
- this->IO_ADDR_W = ep7312_fio_base;
- this->cmd_ctrl = ep7312_hwcontrol;
- this->dev_ready = ep7312_device_ready;
- /* 15 us command delay time */
- this->chip_delay = 15;
-
- /* Scan to find existence of the device */
- if (nand_scan(ep7312_mtd, 1)) {
- iounmap((void *)ep7312_fio_base);
- kfree(ep7312_mtd);
- return -ENXIO;
- }
- ep7312_mtd->name = "edb7312-nand";
- mtd_parts_nb = parse_mtd_partitions(ep7312_mtd, part_probes, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
- if (mtd_parts_nb == 0) {
- mtd_parts = partition_info;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
-
- /* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- mtd_device_register(ep7312_mtd, mtd_parts, mtd_parts_nb);
-
- /* Return happy */
- return 0;
-}
-
-module_init(ep7312_init);
-
-/*
- * Clean up routine
- */
-static void __exit ep7312_cleanup(void)
-{
- struct nand_chip *this = (struct nand_chip *)&ep7312_mtd[1];
-
- /* Release resources, unregister device */
- nand_release(ap7312_mtd);
-
- /* Release io resource */
- iounmap(this->IO_ADDR_R);
-
- /* Free the MTD device structure */
- kfree(ep7312_mtd);
-}
-
-module_exit(ep7312_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
-MODULE_DESCRIPTION("MTD map driver for Cogent EDB7312 board");
unsigned int use_mdr; /* Non zero if the MDR is to be set */
unsigned int oob; /* Non zero if operating on OOB data */
unsigned int counter; /* counter for the initializations */
- char *oob_poi; /* Place to write ECC after read back */
};
/* These map to the positions used by the FCM hardware ECC generator */
return -EIO;
}
+ if (chip->ecc.mode != NAND_ECC_HW)
+ return 0;
+
+ if (elbc_fcm_ctrl->read_bytes == mtd->writesize + mtd->oobsize) {
+ uint32_t lteccr = in_be32(&lbc->lteccr);
+ /*
+ * if command was a full page read and the ELBC
+ * has the LTECCR register, then bits 12-15 (ppc order) of
+ * LTECCR indicates which 512 byte sub-pages had fixed errors.
+ * bits 28-31 are uncorrectable errors, marked elsewhere.
+ * for small page nand only 1 bit is used.
+ * if the ELBC doesn't have the lteccr register it reads 0
+ */
+ if (lteccr & 0x000F000F)
+ out_be32(&lbc->lteccr, 0x000F000F); /* clear lteccr */
+ if (lteccr & 0x000F0000)
+ mtd->ecc_stats.corrected++;
+ }
+
return 0;
}
/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
case NAND_CMD_PAGEPROG: {
- int full_page;
dev_vdbg(priv->dev,
"fsl_elbc_cmdfunc: NAND_CMD_PAGEPROG "
"writing %d bytes.\n", elbc_fcm_ctrl->index);
* write so the HW generates the ECC.
*/
if (elbc_fcm_ctrl->oob || elbc_fcm_ctrl->column != 0 ||
- elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize) {
+ elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize)
out_be32(&lbc->fbcr, elbc_fcm_ctrl->index);
- full_page = 0;
- } else {
+ else
out_be32(&lbc->fbcr, 0);
- full_page = 1;
- }
fsl_elbc_run_command(mtd);
-
- /* Read back the page in order to fill in the ECC for the
- * caller. Is this really needed?
- */
- if (full_page && elbc_fcm_ctrl->oob_poi) {
- out_be32(&lbc->fbcr, 3);
- set_addr(mtd, 6, page_addr, 1);
-
- elbc_fcm_ctrl->read_bytes = mtd->writesize + 9;
-
- fsl_elbc_do_read(chip, 1);
- fsl_elbc_run_command(mtd);
-
- memcpy_fromio(elbc_fcm_ctrl->oob_poi + 6,
- &elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], 3);
- elbc_fcm_ctrl->index += 3;
- }
-
- elbc_fcm_ctrl->oob_poi = NULL;
return;
}
struct nand_chip *chip,
const uint8_t *buf)
{
- struct fsl_elbc_mtd *priv = chip->priv;
- struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
-
fsl_elbc_write_buf(mtd, buf, mtd->writesize);
fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
-
- elbc_fcm_ctrl->oob_poi = chip->oob_poi;
}
static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
chip->bbt_md = &bbt_mirror_descr;
/* set up nand options */
- chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
- NAND_USE_FLASH_BBT;
+ chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+ chip->bbt_options = NAND_BBT_USE_FLASH;
chip->controller = &elbc_fcm_ctrl->controller;
chip->priv = priv;
elbc_fcm_ctrl->chips[priv->bank] = NULL;
kfree(priv);
- kfree(elbc_fcm_ctrl);
return 0;
}
struct resource res;
struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl;
static const char *part_probe_types[]
- = { "cmdlinepart", "RedBoot", NULL };
- struct mtd_partition *parts;
+ = { "cmdlinepart", "RedBoot", "ofpart", NULL };
int ret;
int bank;
struct device *dev;
struct device_node *node = pdev->dev.of_node;
+ struct mtd_part_parser_data ppdata;
+ ppdata.of_node = pdev->dev.of_node;
if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
return -ENODEV;
lbc = fsl_lbc_ctrl_dev->regs;
/* First look for RedBoot table or partitions on the command
* line, these take precedence over device tree information */
- ret = parse_mtd_partitions(&priv->mtd, part_probe_types, &parts, 0);
- if (ret < 0)
- goto err;
-
- if (ret == 0) {
- ret = of_mtd_parse_partitions(priv->dev, node, &parts);
- if (ret < 0)
- goto err;
- }
-
- mtd_device_register(&priv->mtd, parts, ret);
+ mtd_device_parse_register(&priv->mtd, part_probe_types, &ppdata,
+ NULL, 0);
printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n",
(unsigned long long)res.start, priv->bank);
{
int ret;
struct device_node *flash_np;
- static const char *part_types[] = { "cmdlinepart", NULL, };
+ struct mtd_part_parser_data ppdata;
fun->chip.IO_ADDR_R = fun->io_base;
fun->chip.IO_ADDR_W = fun->io_base;
if (ret)
goto err;
- ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0);
-
-#ifdef CONFIG_MTD_OF_PARTS
- if (ret == 0) {
- ret = of_mtd_parse_partitions(fun->dev, flash_np, &fun->parts);
- if (ret < 0)
- goto err;
- }
-#endif
- ret = mtd_device_register(&fun->mtd, fun->parts, ret);
+ ppdata.of_node = flash_np;
+ ret = mtd_device_parse_register(&fun->mtd, NULL, &ppdata, NULL, 0);
err:
of_node_put(flash_np);
+ if (ret)
+ kfree(fun->mtd.name);
return ret;
}
{
.name = "Root File System",
.offset = 0x460000,
- .size = 0,
+ .size = MTDPART_SIZ_FULL,
},
};
{
.name = "Root File System",
.offset = 0x800000,
- .size = 0,
+ .size = MTDPART_SIZ_FULL,
},
};
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
/**
* struct fsmc_nand_data - structure for FSMC NAND device state
* @pid: Part ID on the AMBA PrimeCell format
* @mtd: MTD info for a NAND flash.
* @nand: Chip related info for a NAND flash.
- * @partitions: Partition info for a NAND Flash.
- * @nr_partitions: Total number of partition of a NAND flash.
*
* @ecc_place: ECC placing locations in oobfree type format.
* @bank: Bank number for probed device.
u32 pid;
struct mtd_info mtd;
struct nand_chip nand;
- struct mtd_partition *partitions;
- unsigned int nr_partitions;
struct fsmc_eccplace *ecc_place;
unsigned int bank;
* platform data,
* default partition information present in driver.
*/
-#ifdef CONFIG_MTD_CMDLINE_PARTS
/*
- * Check if partition info passed via command line
+ * Check for partition info passed
*/
host->mtd.name = "nand";
- host->nr_partitions = parse_mtd_partitions(&host->mtd, part_probes,
- &host->partitions, 0);
- if (host->nr_partitions <= 0) {
-#endif
- /*
- * Check if partition info passed via command line
- */
- if (pdata->partitions) {
- host->partitions = pdata->partitions;
- host->nr_partitions = pdata->nr_partitions;
- } else {
- struct mtd_partition *partition;
- int i;
-
- /* Select the default partitions info */
- switch (host->mtd.size) {
- case 0x01000000:
- case 0x02000000:
- case 0x04000000:
- host->partitions = partition_info_16KB_blk;
- host->nr_partitions =
- sizeof(partition_info_16KB_blk) /
- sizeof(struct mtd_partition);
- break;
- case 0x08000000:
- case 0x10000000:
- case 0x20000000:
- case 0x40000000:
- host->partitions = partition_info_128KB_blk;
- host->nr_partitions =
- sizeof(partition_info_128KB_blk) /
- sizeof(struct mtd_partition);
- break;
- default:
- ret = -ENXIO;
- pr_err("Unsupported NAND size\n");
- goto err_probe;
- }
-
- partition = host->partitions;
- for (i = 0; i < host->nr_partitions; i++, partition++) {
- if (partition->size == 0) {
- partition->size = host->mtd.size -
- partition->offset;
- break;
- }
- }
- }
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- }
-#endif
-
- ret = mtd_device_register(&host->mtd, host->partitions,
- host->nr_partitions);
+ ret = mtd_device_parse_register(&host->mtd, NULL, 0,
+ host->mtd.size <= 0x04000000 ?
+ partition_info_16KB_blk :
+ partition_info_128KB_blk,
+ host->mtd.size <= 0x04000000 ?
+ ARRAY_SIZE(partition_info_16KB_blk) :
+ ARRAY_SIZE(partition_info_128KB_blk));
if (ret)
goto err_probe;
platform_set_drvdata(pdev, NULL);
if (host) {
- mtd_device_unregister(&host->mtd);
+ nand_release(&host->mtd);
clk_disable(host->clk);
clk_put(host->clk);
--- /dev/null
+obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi_nand.o
+gpmi_nand-objs += gpmi-nand.o
+gpmi_nand-objs += gpmi-lib.o
--- /dev/null
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __GPMI_NAND_BCH_REGS_H
+#define __GPMI_NAND_BCH_REGS_H
+
+#define HW_BCH_CTRL 0x00000000
+#define HW_BCH_CTRL_SET 0x00000004
+#define HW_BCH_CTRL_CLR 0x00000008
+#define HW_BCH_CTRL_TOG 0x0000000c
+
+#define BM_BCH_CTRL_COMPLETE_IRQ_EN (1 << 8)
+#define BM_BCH_CTRL_COMPLETE_IRQ (1 << 0)
+
+#define HW_BCH_STATUS0 0x00000010
+#define HW_BCH_MODE 0x00000020
+#define HW_BCH_ENCODEPTR 0x00000030
+#define HW_BCH_DATAPTR 0x00000040
+#define HW_BCH_METAPTR 0x00000050
+#define HW_BCH_LAYOUTSELECT 0x00000070
+
+#define HW_BCH_FLASH0LAYOUT0 0x00000080
+
+#define BP_BCH_FLASH0LAYOUT0_NBLOCKS 24
+#define BM_BCH_FLASH0LAYOUT0_NBLOCKS (0xff << BP_BCH_FLASH0LAYOUT0_NBLOCKS)
+#define BF_BCH_FLASH0LAYOUT0_NBLOCKS(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_NBLOCKS) & BM_BCH_FLASH0LAYOUT0_NBLOCKS)
+
+#define BP_BCH_FLASH0LAYOUT0_META_SIZE 16
+#define BM_BCH_FLASH0LAYOUT0_META_SIZE (0xff << BP_BCH_FLASH0LAYOUT0_META_SIZE)
+#define BF_BCH_FLASH0LAYOUT0_META_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_META_SIZE)\
+ & BM_BCH_FLASH0LAYOUT0_META_SIZE)
+
+#define BP_BCH_FLASH0LAYOUT0_ECC0 12
+#define BM_BCH_FLASH0LAYOUT0_ECC0 (0xf << BP_BCH_FLASH0LAYOUT0_ECC0)
+#define BF_BCH_FLASH0LAYOUT0_ECC0(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_ECC0) & BM_BCH_FLASH0LAYOUT0_ECC0)
+
+#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0
+#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \
+ (0xfff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)\
+ & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+
+#define HW_BCH_FLASH0LAYOUT1 0x00000090
+
+#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE 16
+#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE \
+ (0xffff << BP_BCH_FLASH0LAYOUT1_PAGE_SIZE)
+#define BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT1_PAGE_SIZE) \
+ & BM_BCH_FLASH0LAYOUT1_PAGE_SIZE)
+
+#define BP_BCH_FLASH0LAYOUT1_ECCN 12
+#define BM_BCH_FLASH0LAYOUT1_ECCN (0xf << BP_BCH_FLASH0LAYOUT1_ECCN)
+#define BF_BCH_FLASH0LAYOUT1_ECCN(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT1_ECCN) & BM_BCH_FLASH0LAYOUT1_ECCN)
+
+#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0
+#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \
+ (0xfff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
+ & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#endif
--- /dev/null
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/mtd/gpmi-nand.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <mach/mxs.h>
+
+#include "gpmi-nand.h"
+#include "gpmi-regs.h"
+#include "bch-regs.h"
+
+struct timing_threshod timing_default_threshold = {
+ .max_data_setup_cycles = (BM_GPMI_TIMING0_DATA_SETUP >>
+ BP_GPMI_TIMING0_DATA_SETUP),
+ .internal_data_setup_in_ns = 0,
+ .max_sample_delay_factor = (BM_GPMI_CTRL1_RDN_DELAY >>
+ BP_GPMI_CTRL1_RDN_DELAY),
+ .max_dll_clock_period_in_ns = 32,
+ .max_dll_delay_in_ns = 16,
+};
+
+/*
+ * Clear the bit and poll it cleared. This is usually called with
+ * a reset address and mask being either SFTRST(bit 31) or CLKGATE
+ * (bit 30).
+ */
+static int clear_poll_bit(void __iomem *addr, u32 mask)
+{
+ int timeout = 0x400;
+
+ /* clear the bit */
+ __mxs_clrl(mask, addr);
+
+ /*
+ * SFTRST needs 3 GPMI clocks to settle, the reference manual
+ * recommends to wait 1us.
+ */
+ udelay(1);
+
+ /* poll the bit becoming clear */
+ while ((readl(addr) & mask) && --timeout)
+ /* nothing */;
+
+ return !timeout;
+}
+
+#define MODULE_CLKGATE (1 << 30)
+#define MODULE_SFTRST (1 << 31)
+/*
+ * The current mxs_reset_block() will do two things:
+ * [1] enable the module.
+ * [2] reset the module.
+ *
+ * In most of the cases, it's ok. But there is a hardware bug in the BCH block.
+ * If you try to soft reset the BCH block, it becomes unusable until
+ * the next hard reset. This case occurs in the NAND boot mode. When the board
+ * boots by NAND, the ROM of the chip will initialize the BCH blocks itself.
+ * So If the driver tries to reset the BCH again, the BCH will not work anymore.
+ * You will see a DMA timeout in this case.
+ *
+ * To avoid this bug, just add a new parameter `just_enable` for
+ * the mxs_reset_block(), and rewrite it here.
+ */
+int gpmi_reset_block(void __iomem *reset_addr, bool just_enable)
+{
+ int ret;
+ int timeout = 0x400;
+
+ /* clear and poll SFTRST */
+ ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+ if (unlikely(ret))
+ goto error;
+
+ /* clear CLKGATE */
+ __mxs_clrl(MODULE_CLKGATE, reset_addr);
+
+ if (!just_enable) {
+ /* set SFTRST to reset the block */
+ __mxs_setl(MODULE_SFTRST, reset_addr);
+ udelay(1);
+
+ /* poll CLKGATE becoming set */
+ while ((!(readl(reset_addr) & MODULE_CLKGATE)) && --timeout)
+ /* nothing */;
+ if (unlikely(!timeout))
+ goto error;
+ }
+
+ /* clear and poll SFTRST */
+ ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+ if (unlikely(ret))
+ goto error;
+
+ /* clear and poll CLKGATE */
+ ret = clear_poll_bit(reset_addr, MODULE_CLKGATE);
+ if (unlikely(ret))
+ goto error;
+
+ return 0;
+
+error:
+ pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
+ return -ETIMEDOUT;
+}
+
+int gpmi_init(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ int ret;
+
+ ret = clk_enable(r->clock);
+ if (ret)
+ goto err_out;
+ ret = gpmi_reset_block(r->gpmi_regs, false);
+ if (ret)
+ goto err_out;
+
+ /* Choose NAND mode. */
+ writel(BM_GPMI_CTRL1_GPMI_MODE, r->gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+ /* Set the IRQ polarity. */
+ writel(BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY,
+ r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Disable Write-Protection. */
+ writel(BM_GPMI_CTRL1_DEV_RESET, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Select BCH ECC. */
+ writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ clk_disable(r->clock);
+ return 0;
+err_out:
+ return ret;
+}
+
+/* This function is very useful. It is called only when the bug occur. */
+void gpmi_dump_info(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ struct bch_geometry *geo = &this->bch_geometry;
+ u32 reg;
+ int i;
+
+ pr_err("Show GPMI registers :\n");
+ for (i = 0; i <= HW_GPMI_DEBUG / 0x10 + 1; i++) {
+ reg = readl(r->gpmi_regs + i * 0x10);
+ pr_err("offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
+ }
+
+ /* start to print out the BCH info */
+ pr_err("BCH Geometry :\n");
+ pr_err("GF length : %u\n", geo->gf_len);
+ pr_err("ECC Strength : %u\n", geo->ecc_strength);
+ pr_err("Page Size in Bytes : %u\n", geo->page_size);
+ pr_err("Metadata Size in Bytes : %u\n", geo->metadata_size);
+ pr_err("ECC Chunk Size in Bytes: %u\n", geo->ecc_chunk_size);
+ pr_err("ECC Chunk Count : %u\n", geo->ecc_chunk_count);
+ pr_err("Payload Size in Bytes : %u\n", geo->payload_size);
+ pr_err("Auxiliary Size in Bytes: %u\n", geo->auxiliary_size);
+ pr_err("Auxiliary Status Offset: %u\n", geo->auxiliary_status_offset);
+ pr_err("Block Mark Byte Offset : %u\n", geo->block_mark_byte_offset);
+ pr_err("Block Mark Bit Offset : %u\n", geo->block_mark_bit_offset);
+}
+
+/* Configures the geometry for BCH. */
+int bch_set_geometry(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ struct bch_geometry *bch_geo = &this->bch_geometry;
+ unsigned int block_count;
+ unsigned int block_size;
+ unsigned int metadata_size;
+ unsigned int ecc_strength;
+ unsigned int page_size;
+ int ret;
+
+ if (common_nfc_set_geometry(this))
+ return !0;
+
+ block_count = bch_geo->ecc_chunk_count - 1;
+ block_size = bch_geo->ecc_chunk_size;
+ metadata_size = bch_geo->metadata_size;
+ ecc_strength = bch_geo->ecc_strength >> 1;
+ page_size = bch_geo->page_size;
+
+ ret = clk_enable(r->clock);
+ if (ret)
+ goto err_out;
+
+ ret = gpmi_reset_block(r->bch_regs, true);
+ if (ret)
+ goto err_out;
+
+ /* Configure layout 0. */
+ writel(BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count)
+ | BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size)
+ | BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength)
+ | BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size),
+ r->bch_regs + HW_BCH_FLASH0LAYOUT0);
+
+ writel(BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size)
+ | BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength)
+ | BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size),
+ r->bch_regs + HW_BCH_FLASH0LAYOUT1);
+
+ /* Set *all* chip selects to use layout 0. */
+ writel(0, r->bch_regs + HW_BCH_LAYOUTSELECT);
+
+ /* Enable interrupts. */
+ writel(BM_BCH_CTRL_COMPLETE_IRQ_EN,
+ r->bch_regs + HW_BCH_CTRL_SET);
+
+ clk_disable(r->clock);
+ return 0;
+err_out:
+ return ret;
+}
+
+/* Converts time in nanoseconds to cycles. */
+static unsigned int ns_to_cycles(unsigned int time,
+ unsigned int period, unsigned int min)
+{
+ unsigned int k;
+
+ k = (time + period - 1) / period;
+ return max(k, min);
+}
+
+/* Apply timing to current hardware conditions. */
+static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
+ struct gpmi_nfc_hardware_timing *hw)
+{
+ struct gpmi_nand_platform_data *pdata = this->pdata;
+ struct timing_threshod *nfc = &timing_default_threshold;
+ struct nand_chip *nand = &this->nand;
+ struct nand_timing target = this->timing;
+ bool improved_timing_is_available;
+ unsigned long clock_frequency_in_hz;
+ unsigned int clock_period_in_ns;
+ bool dll_use_half_periods;
+ unsigned int dll_delay_shift;
+ unsigned int max_sample_delay_in_ns;
+ unsigned int address_setup_in_cycles;
+ unsigned int data_setup_in_ns;
+ unsigned int data_setup_in_cycles;
+ unsigned int data_hold_in_cycles;
+ int ideal_sample_delay_in_ns;
+ unsigned int sample_delay_factor;
+ int tEYE;
+ unsigned int min_prop_delay_in_ns = pdata->min_prop_delay_in_ns;
+ unsigned int max_prop_delay_in_ns = pdata->max_prop_delay_in_ns;
+
+ /*
+ * If there are multiple chips, we need to relax the timings to allow
+ * for signal distortion due to higher capacitance.
+ */
+ if (nand->numchips > 2) {
+ target.data_setup_in_ns += 10;
+ target.data_hold_in_ns += 10;
+ target.address_setup_in_ns += 10;
+ } else if (nand->numchips > 1) {
+ target.data_setup_in_ns += 5;
+ target.data_hold_in_ns += 5;
+ target.address_setup_in_ns += 5;
+ }
+
+ /* Check if improved timing information is available. */
+ improved_timing_is_available =
+ (target.tREA_in_ns >= 0) &&
+ (target.tRLOH_in_ns >= 0) &&
+ (target.tRHOH_in_ns >= 0) ;
+
+ /* Inspect the clock. */
+ clock_frequency_in_hz = nfc->clock_frequency_in_hz;
+ clock_period_in_ns = 1000000000 / clock_frequency_in_hz;
+
+ /*
+ * The NFC quantizes setup and hold parameters in terms of clock cycles.
+ * Here, we quantize the setup and hold timing parameters to the
+ * next-highest clock period to make sure we apply at least the
+ * specified times.
+ *
+ * For data setup and data hold, the hardware interprets a value of zero
+ * as the largest possible delay. This is not what's intended by a zero
+ * in the input parameter, so we impose a minimum of one cycle.
+ */
+ data_setup_in_cycles = ns_to_cycles(target.data_setup_in_ns,
+ clock_period_in_ns, 1);
+ data_hold_in_cycles = ns_to_cycles(target.data_hold_in_ns,
+ clock_period_in_ns, 1);
+ address_setup_in_cycles = ns_to_cycles(target.address_setup_in_ns,
+ clock_period_in_ns, 0);
+
+ /*
+ * The clock's period affects the sample delay in a number of ways:
+ *
+ * (1) The NFC HAL tells us the maximum clock period the sample delay
+ * DLL can tolerate. If the clock period is greater than half that
+ * maximum, we must configure the DLL to be driven by half periods.
+ *
+ * (2) We need to convert from an ideal sample delay, in ns, to a
+ * "sample delay factor," which the NFC uses. This factor depends on
+ * whether we're driving the DLL with full or half periods.
+ * Paraphrasing the reference manual:
+ *
+ * AD = SDF x 0.125 x RP
+ *
+ * where:
+ *
+ * AD is the applied delay, in ns.
+ * SDF is the sample delay factor, which is dimensionless.
+ * RP is the reference period, in ns, which is a full clock period
+ * if the DLL is being driven by full periods, or half that if
+ * the DLL is being driven by half periods.
+ *
+ * Let's re-arrange this in a way that's more useful to us:
+ *
+ * 8
+ * SDF = AD x ----
+ * RP
+ *
+ * The reference period is either the clock period or half that, so this
+ * is:
+ *
+ * 8 AD x DDF
+ * SDF = AD x ----- = --------
+ * f x P P
+ *
+ * where:
+ *
+ * f is 1 or 1/2, depending on how we're driving the DLL.
+ * P is the clock period.
+ * DDF is the DLL Delay Factor, a dimensionless value that
+ * incorporates all the constants in the conversion.
+ *
+ * DDF will be either 8 or 16, both of which are powers of two. We can
+ * reduce the cost of this conversion by using bit shifts instead of
+ * multiplication or division. Thus:
+ *
+ * AD << DDS
+ * SDF = ---------
+ * P
+ *
+ * or
+ *
+ * AD = (SDF >> DDS) x P
+ *
+ * where:
+ *
+ * DDS is the DLL Delay Shift, the logarithm to base 2 of the DDF.
+ */
+ if (clock_period_in_ns > (nfc->max_dll_clock_period_in_ns >> 1)) {
+ dll_use_half_periods = true;
+ dll_delay_shift = 3 + 1;
+ } else {
+ dll_use_half_periods = false;
+ dll_delay_shift = 3;
+ }
+
+ /*
+ * Compute the maximum sample delay the NFC allows, under current
+ * conditions. If the clock is running too slowly, no sample delay is
+ * possible.
+ */
+ if (clock_period_in_ns > nfc->max_dll_clock_period_in_ns)
+ max_sample_delay_in_ns = 0;
+ else {
+ /*
+ * Compute the delay implied by the largest sample delay factor
+ * the NFC allows.
+ */
+ max_sample_delay_in_ns =
+ (nfc->max_sample_delay_factor * clock_period_in_ns) >>
+ dll_delay_shift;
+
+ /*
+ * Check if the implied sample delay larger than the NFC
+ * actually allows.
+ */
+ if (max_sample_delay_in_ns > nfc->max_dll_delay_in_ns)
+ max_sample_delay_in_ns = nfc->max_dll_delay_in_ns;
+ }
+
+ /*
+ * Check if improved timing information is available. If not, we have to
+ * use a less-sophisticated algorithm.
+ */
+ if (!improved_timing_is_available) {
+ /*
+ * Fold the read setup time required by the NFC into the ideal
+ * sample delay.
+ */
+ ideal_sample_delay_in_ns = target.gpmi_sample_delay_in_ns +
+ nfc->internal_data_setup_in_ns;
+
+ /*
+ * The ideal sample delay may be greater than the maximum
+ * allowed by the NFC. If so, we can trade off sample delay time
+ * for more data setup time.
+ *
+ * In each iteration of the following loop, we add a cycle to
+ * the data setup time and subtract a corresponding amount from
+ * the sample delay until we've satisified the constraints or
+ * can't do any better.
+ */
+ while ((ideal_sample_delay_in_ns > max_sample_delay_in_ns) &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+
+ data_setup_in_cycles++;
+ ideal_sample_delay_in_ns -= clock_period_in_ns;
+
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+
+ }
+
+ /*
+ * Compute the sample delay factor that corresponds most closely
+ * to the ideal sample delay. If the result is too large for the
+ * NFC, use the maximum value.
+ *
+ * Notice that we use the ns_to_cycles function to compute the
+ * sample delay factor. We do this because the form of the
+ * computation is the same as that for calculating cycles.
+ */
+ sample_delay_factor =
+ ns_to_cycles(
+ ideal_sample_delay_in_ns << dll_delay_shift,
+ clock_period_in_ns, 0);
+
+ if (sample_delay_factor > nfc->max_sample_delay_factor)
+ sample_delay_factor = nfc->max_sample_delay_factor;
+
+ /* Skip to the part where we return our results. */
+ goto return_results;
+ }
+
+ /*
+ * If control arrives here, we have more detailed timing information,
+ * so we can use a better algorithm.
+ */
+
+ /*
+ * Fold the read setup time required by the NFC into the maximum
+ * propagation delay.
+ */
+ max_prop_delay_in_ns += nfc->internal_data_setup_in_ns;
+
+ /*
+ * Earlier, we computed the number of clock cycles required to satisfy
+ * the data setup time. Now, we need to know the actual nanoseconds.
+ */
+ data_setup_in_ns = clock_period_in_ns * data_setup_in_cycles;
+
+ /*
+ * Compute tEYE, the width of the data eye when reading from the NAND
+ * Flash. The eye width is fundamentally determined by the data setup
+ * time, perturbed by propagation delays and some characteristics of the
+ * NAND Flash device.
+ *
+ * start of the eye = max_prop_delay + tREA
+ * end of the eye = min_prop_delay + tRHOH + data_setup
+ */
+ tEYE = (int)min_prop_delay_in_ns + (int)target.tRHOH_in_ns +
+ (int)data_setup_in_ns;
+
+ tEYE -= (int)max_prop_delay_in_ns + (int)target.tREA_in_ns;
+
+ /*
+ * The eye must be open. If it's not, we can try to open it by
+ * increasing its main forcer, the data setup time.
+ *
+ * In each iteration of the following loop, we increase the data setup
+ * time by a single clock cycle. We do this until either the eye is
+ * open or we run into NFC limits.
+ */
+ while ((tEYE <= 0) &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+ /* Give a cycle to data setup. */
+ data_setup_in_cycles++;
+ /* Synchronize the data setup time with the cycles. */
+ data_setup_in_ns += clock_period_in_ns;
+ /* Adjust tEYE accordingly. */
+ tEYE += clock_period_in_ns;
+ }
+
+ /*
+ * When control arrives here, the eye is open. The ideal time to sample
+ * the data is in the center of the eye:
+ *
+ * end of the eye + start of the eye
+ * --------------------------------- - data_setup
+ * 2
+ *
+ * After some algebra, this simplifies to the code immediately below.
+ */
+ ideal_sample_delay_in_ns =
+ ((int)max_prop_delay_in_ns +
+ (int)target.tREA_in_ns +
+ (int)min_prop_delay_in_ns +
+ (int)target.tRHOH_in_ns -
+ (int)data_setup_in_ns) >> 1;
+
+ /*
+ * The following figure illustrates some aspects of a NAND Flash read:
+ *
+ *
+ * __ _____________________________________
+ * RDN \_________________/
+ *
+ * <---- tEYE ----->
+ * /-----------------\
+ * Read Data ----------------------------< >---------
+ * \-----------------/
+ * ^ ^ ^ ^
+ * | | | |
+ * |<--Data Setup -->|<--Delay Time -->| |
+ * | | | |
+ * | | |
+ * | |<-- Quantized Delay Time -->|
+ * | | |
+ *
+ *
+ * We have some issues we must now address:
+ *
+ * (1) The *ideal* sample delay time must not be negative. If it is, we
+ * jam it to zero.
+ *
+ * (2) The *ideal* sample delay time must not be greater than that
+ * allowed by the NFC. If it is, we can increase the data setup
+ * time, which will reduce the delay between the end of the data
+ * setup and the center of the eye. It will also make the eye
+ * larger, which might help with the next issue...
+ *
+ * (3) The *quantized* sample delay time must not fall either before the
+ * eye opens or after it closes (the latter is the problem
+ * illustrated in the above figure).
+ */
+
+ /* Jam a negative ideal sample delay to zero. */
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+
+ /*
+ * Extend the data setup as needed to reduce the ideal sample delay
+ * below the maximum permitted by the NFC.
+ */
+ while ((ideal_sample_delay_in_ns > max_sample_delay_in_ns) &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+
+ /* Give a cycle to data setup. */
+ data_setup_in_cycles++;
+ /* Synchronize the data setup time with the cycles. */
+ data_setup_in_ns += clock_period_in_ns;
+ /* Adjust tEYE accordingly. */
+ tEYE += clock_period_in_ns;
+
+ /*
+ * Decrease the ideal sample delay by one half cycle, to keep it
+ * in the middle of the eye.
+ */
+ ideal_sample_delay_in_ns -= (clock_period_in_ns >> 1);
+
+ /* Jam a negative ideal sample delay to zero. */
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+ }
+
+ /*
+ * Compute the sample delay factor that corresponds to the ideal sample
+ * delay. If the result is too large, then use the maximum allowed
+ * value.
+ *
+ * Notice that we use the ns_to_cycles function to compute the sample
+ * delay factor. We do this because the form of the computation is the
+ * same as that for calculating cycles.
+ */
+ sample_delay_factor =
+ ns_to_cycles(ideal_sample_delay_in_ns << dll_delay_shift,
+ clock_period_in_ns, 0);
+
+ if (sample_delay_factor > nfc->max_sample_delay_factor)
+ sample_delay_factor = nfc->max_sample_delay_factor;
+
+ /*
+ * These macros conveniently encapsulate a computation we'll use to
+ * continuously evaluate whether or not the data sample delay is inside
+ * the eye.
+ */
+ #define IDEAL_DELAY ((int) ideal_sample_delay_in_ns)
+
+ #define QUANTIZED_DELAY \
+ ((int) ((sample_delay_factor * clock_period_in_ns) >> \
+ dll_delay_shift))
+
+ #define DELAY_ERROR (abs(QUANTIZED_DELAY - IDEAL_DELAY))
+
+ #define SAMPLE_IS_NOT_WITHIN_THE_EYE (DELAY_ERROR > (tEYE >> 1))
+
+ /*
+ * While the quantized sample time falls outside the eye, reduce the
+ * sample delay or extend the data setup to move the sampling point back
+ * toward the eye. Do not allow the number of data setup cycles to
+ * exceed the maximum allowed by the NFC.
+ */
+ while (SAMPLE_IS_NOT_WITHIN_THE_EYE &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+ /*
+ * If control arrives here, the quantized sample delay falls
+ * outside the eye. Check if it's before the eye opens, or after
+ * the eye closes.
+ */
+ if (QUANTIZED_DELAY > IDEAL_DELAY) {
+ /*
+ * If control arrives here, the quantized sample delay
+ * falls after the eye closes. Decrease the quantized
+ * delay time and then go back to re-evaluate.
+ */
+ if (sample_delay_factor != 0)
+ sample_delay_factor--;
+ continue;
+ }
+
+ /*
+ * If control arrives here, the quantized sample delay falls
+ * before the eye opens. Shift the sample point by increasing
+ * data setup time. This will also make the eye larger.
+ */
+
+ /* Give a cycle to data setup. */
+ data_setup_in_cycles++;
+ /* Synchronize the data setup time with the cycles. */
+ data_setup_in_ns += clock_period_in_ns;
+ /* Adjust tEYE accordingly. */
+ tEYE += clock_period_in_ns;
+
+ /*
+ * Decrease the ideal sample delay by one half cycle, to keep it
+ * in the middle of the eye.
+ */
+ ideal_sample_delay_in_ns -= (clock_period_in_ns >> 1);
+
+ /* ...and one less period for the delay time. */
+ ideal_sample_delay_in_ns -= clock_period_in_ns;
+
+ /* Jam a negative ideal sample delay to zero. */
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+
+ /*
+ * We have a new ideal sample delay, so re-compute the quantized
+ * delay.
+ */
+ sample_delay_factor =
+ ns_to_cycles(
+ ideal_sample_delay_in_ns << dll_delay_shift,
+ clock_period_in_ns, 0);
+
+ if (sample_delay_factor > nfc->max_sample_delay_factor)
+ sample_delay_factor = nfc->max_sample_delay_factor;
+ }
+
+ /* Control arrives here when we're ready to return our results. */
+return_results:
+ hw->data_setup_in_cycles = data_setup_in_cycles;
+ hw->data_hold_in_cycles = data_hold_in_cycles;
+ hw->address_setup_in_cycles = address_setup_in_cycles;
+ hw->use_half_periods = dll_use_half_periods;
+ hw->sample_delay_factor = sample_delay_factor;
+
+ /* Return success. */
+ return 0;
+}
+
+/* Begin the I/O */
+void gpmi_begin(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ struct timing_threshod *nfc = &timing_default_threshold;
+ unsigned char *gpmi_regs = r->gpmi_regs;
+ unsigned int clock_period_in_ns;
+ uint32_t reg;
+ unsigned int dll_wait_time_in_us;
+ struct gpmi_nfc_hardware_timing hw;
+ int ret;
+
+ /* Enable the clock. */
+ ret = clk_enable(r->clock);
+ if (ret) {
+ pr_err("We failed in enable the clk\n");
+ goto err_out;
+ }
+
+ /* set ready/busy timeout */
+ writel(0x500 << BP_GPMI_TIMING1_BUSY_TIMEOUT,
+ gpmi_regs + HW_GPMI_TIMING1);
+
+ /* Get the timing information we need. */
+ nfc->clock_frequency_in_hz = clk_get_rate(r->clock);
+ clock_period_in_ns = 1000000000 / nfc->clock_frequency_in_hz;
+
+ gpmi_nfc_compute_hardware_timing(this, &hw);
+
+ /* Set up all the simple timing parameters. */
+ reg = BF_GPMI_TIMING0_ADDRESS_SETUP(hw.address_setup_in_cycles) |
+ BF_GPMI_TIMING0_DATA_HOLD(hw.data_hold_in_cycles) |
+ BF_GPMI_TIMING0_DATA_SETUP(hw.data_setup_in_cycles) ;
+
+ writel(reg, gpmi_regs + HW_GPMI_TIMING0);
+
+ /*
+ * DLL_ENABLE must be set to 0 when setting RDN_DELAY or HALF_PERIOD.
+ */
+ writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+ /* Clear out the DLL control fields. */
+ writel(BM_GPMI_CTRL1_RDN_DELAY, gpmi_regs + HW_GPMI_CTRL1_CLR);
+ writel(BM_GPMI_CTRL1_HALF_PERIOD, gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+ /* If no sample delay is called for, return immediately. */
+ if (!hw.sample_delay_factor)
+ return;
+
+ /* Configure the HALF_PERIOD flag. */
+ if (hw.use_half_periods)
+ writel(BM_GPMI_CTRL1_HALF_PERIOD,
+ gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Set the delay factor. */
+ writel(BF_GPMI_CTRL1_RDN_DELAY(hw.sample_delay_factor),
+ gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Enable the DLL. */
+ writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /*
+ * After we enable the GPMI DLL, we have to wait 64 clock cycles before
+ * we can use the GPMI.
+ *
+ * Calculate the amount of time we need to wait, in microseconds.
+ */
+ dll_wait_time_in_us = (clock_period_in_ns * 64) / 1000;
+
+ if (!dll_wait_time_in_us)
+ dll_wait_time_in_us = 1;
+
+ /* Wait for the DLL to settle. */
+ udelay(dll_wait_time_in_us);
+
+err_out:
+ return;
+}
+
+void gpmi_end(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ clk_disable(r->clock);
+}
+
+/* Clears a BCH interrupt. */
+void gpmi_clear_bch(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ writel(BM_BCH_CTRL_COMPLETE_IRQ, r->bch_regs + HW_BCH_CTRL_CLR);
+}
+
+/* Returns the Ready/Busy status of the given chip. */
+int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
+{
+ struct resources *r = &this->resources;
+ uint32_t mask = 0;
+ uint32_t reg = 0;
+
+ if (GPMI_IS_MX23(this)) {
+ mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
+ reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
+ } else if (GPMI_IS_MX28(this)) {
+ mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip);
+ reg = readl(r->gpmi_regs + HW_GPMI_STAT);
+ } else
+ pr_err("unknow arch.\n");
+ return reg & mask;
+}
+
+static inline void set_dma_type(struct gpmi_nand_data *this,
+ enum dma_ops_type type)
+{
+ this->last_dma_type = this->dma_type;
+ this->dma_type = type;
+}
+
+int gpmi_send_command(struct gpmi_nand_data *this)
+{
+ struct dma_chan *channel = get_dma_chan(this);
+ struct dma_async_tx_descriptor *desc;
+ struct scatterlist *sgl;
+ int chip = this->current_chip;
+ u32 pio[3];
+
+ /* [1] send out the PIO words */
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__WRITE)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_CLE)
+ | BM_GPMI_CTRL0_ADDRESS_INCREMENT
+ | BF_GPMI_CTRL0_XFER_COUNT(this->command_length);
+ pio[1] = pio[2] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 1 error\n");
+ return -1;
+ }
+
+ /* [2] send out the COMMAND + ADDRESS string stored in @buffer */
+ sgl = &this->cmd_sgl;
+
+ sg_init_one(sgl, this->cmd_buffer, this->command_length);
+ dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE);
+ desc = channel->device->device_prep_slave_sg(channel,
+ sgl, 1, DMA_TO_DEVICE, 1);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+
+ /* [3] submit the DMA */
+ set_dma_type(this, DMA_FOR_COMMAND);
+ return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_send_data(struct gpmi_nand_data *this)
+{
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ uint32_t command_mode;
+ uint32_t address;
+ u32 pio[2];
+
+ /* [1] PIO */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
+ pio[1] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 1 error\n");
+ return -1;
+ }
+
+ /* [2] send DMA request */
+ prepare_data_dma(this, DMA_TO_DEVICE);
+ desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl,
+ 1, DMA_TO_DEVICE, 1);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+ /* [3] submit the DMA */
+ set_dma_type(this, DMA_FOR_WRITE_DATA);
+ return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_read_data(struct gpmi_nand_data *this)
+{
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ u32 pio[2];
+
+ /* [1] : send PIO */
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__READ)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA)
+ | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
+ pio[1] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 1 error\n");
+ return -1;
+ }
+
+ /* [2] : send DMA request */
+ prepare_data_dma(this, DMA_FROM_DEVICE);
+ desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl,
+ 1, DMA_FROM_DEVICE, 1);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+
+ /* [3] : submit the DMA */
+ set_dma_type(this, DMA_FOR_READ_DATA);
+ return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_send_page(struct gpmi_nand_data *this,
+ dma_addr_t payload, dma_addr_t auxiliary)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ uint32_t command_mode;
+ uint32_t address;
+ uint32_t ecc_command;
+ uint32_t buffer_mask;
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ u32 pio[6];
+
+ /* A DMA descriptor that does an ECC page read. */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+ ecc_command = BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE;
+ buffer_mask = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE |
+ BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(0);
+ pio[1] = 0;
+ pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
+ | BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
+ | BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
+ pio[3] = geo->page_size;
+ pio[4] = payload;
+ pio[5] = auxiliary;
+
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+ set_dma_type(this, DMA_FOR_WRITE_ECC_PAGE);
+ return start_dma_with_bch_irq(this, desc);
+}
+
+int gpmi_read_page(struct gpmi_nand_data *this,
+ dma_addr_t payload, dma_addr_t auxiliary)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ uint32_t command_mode;
+ uint32_t address;
+ uint32_t ecc_command;
+ uint32_t buffer_mask;
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ u32 pio[6];
+
+ /* [1] Wait for the chip to report ready. */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(0);
+ pio[1] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio, 2, DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 1 error\n");
+ return -1;
+ }
+
+ /* [2] Enable the BCH block and read. */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__READ;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+ ecc_command = BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE;
+ buffer_mask = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE
+ | BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
+
+ pio[1] = 0;
+ pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
+ | BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
+ | BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
+ pio[3] = geo->page_size;
+ pio[4] = payload;
+ pio[5] = auxiliary;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 1);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+
+ /* [3] Disable the BCH block */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
+ pio[1] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio, 2, DMA_NONE, 1);
+ if (!desc) {
+ pr_err("step 3 error\n");
+ return -1;
+ }
+
+ /* [4] submit the DMA */
+ set_dma_type(this, DMA_FOR_READ_ECC_PAGE);
+ return start_dma_with_bch_irq(this, desc);
+}
--- /dev/null
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/gpmi-nand.h>
+#include <linux/mtd/partitions.h>
+
+#include "gpmi-nand.h"
+
+/* add our owner bbt descriptor */
+static uint8_t scan_ff_pattern[] = { 0xff };
+static struct nand_bbt_descr gpmi_bbt_descr = {
+ .options = 0,
+ .offs = 0,
+ .len = 1,
+ .pattern = scan_ff_pattern
+};
+
+/* We will use all the (page + OOB). */
+static struct nand_ecclayout gpmi_hw_ecclayout = {
+ .eccbytes = 0,
+ .eccpos = { 0, },
+ .oobfree = { {.offset = 0, .length = 0} }
+};
+
+static irqreturn_t bch_irq(int irq, void *cookie)
+{
+ struct gpmi_nand_data *this = cookie;
+
+ gpmi_clear_bch(this);
+ complete(&this->bch_done);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Calculate the ECC strength by hand:
+ * E : The ECC strength.
+ * G : the length of Galois Field.
+ * N : The chunk count of per page.
+ * O : the oobsize of the NAND chip.
+ * M : the metasize of per page.
+ *
+ * The formula is :
+ * E * G * N
+ * ------------ <= (O - M)
+ * 8
+ *
+ * So, we get E by:
+ * (O - M) * 8
+ * E <= -------------
+ * G * N
+ */
+static inline int get_ecc_strength(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ struct mtd_info *mtd = &this->mtd;
+ int ecc_strength;
+
+ ecc_strength = ((mtd->oobsize - geo->metadata_size) * 8)
+ / (geo->gf_len * geo->ecc_chunk_count);
+
+ /* We need the minor even number. */
+ return round_down(ecc_strength, 2);
+}
+
+int common_nfc_set_geometry(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ struct mtd_info *mtd = &this->mtd;
+ unsigned int metadata_size;
+ unsigned int status_size;
+ unsigned int block_mark_bit_offset;
+
+ /*
+ * The size of the metadata can be changed, though we set it to 10
+ * bytes now. But it can't be too large, because we have to save
+ * enough space for BCH.
+ */
+ geo->metadata_size = 10;
+
+ /* The default for the length of Galois Field. */
+ geo->gf_len = 13;
+
+ /* The default for chunk size. There is no oobsize greater then 512. */
+ geo->ecc_chunk_size = 512;
+ while (geo->ecc_chunk_size < mtd->oobsize)
+ geo->ecc_chunk_size *= 2; /* keep C >= O */
+
+ geo->ecc_chunk_count = mtd->writesize / geo->ecc_chunk_size;
+
+ /* We use the same ECC strength for all chunks. */
+ geo->ecc_strength = get_ecc_strength(this);
+ if (!geo->ecc_strength) {
+ pr_err("We get a wrong ECC strength.\n");
+ return -EINVAL;
+ }
+
+ geo->page_size = mtd->writesize + mtd->oobsize;
+ geo->payload_size = mtd->writesize;
+
+ /*
+ * The auxiliary buffer contains the metadata and the ECC status. The
+ * metadata is padded to the nearest 32-bit boundary. The ECC status
+ * contains one byte for every ECC chunk, and is also padded to the
+ * nearest 32-bit boundary.
+ */
+ metadata_size = ALIGN(geo->metadata_size, 4);
+ status_size = ALIGN(geo->ecc_chunk_count, 4);
+
+ geo->auxiliary_size = metadata_size + status_size;
+ geo->auxiliary_status_offset = metadata_size;
+
+ if (!this->swap_block_mark)
+ return 0;
+
+ /*
+ * We need to compute the byte and bit offsets of
+ * the physical block mark within the ECC-based view of the page.
+ *
+ * NAND chip with 2K page shows below:
+ * (Block Mark)
+ * | |
+ * | D |
+ * |<---->|
+ * V V
+ * +---+----------+-+----------+-+----------+-+----------+-+
+ * | M | data |E| data |E| data |E| data |E|
+ * +---+----------+-+----------+-+----------+-+----------+-+
+ *
+ * The position of block mark moves forward in the ECC-based view
+ * of page, and the delta is:
+ *
+ * E * G * (N - 1)
+ * D = (---------------- + M)
+ * 8
+ *
+ * With the formula to compute the ECC strength, and the condition
+ * : C >= O (C is the ecc chunk size)
+ *
+ * It's easy to deduce to the following result:
+ *
+ * E * G (O - M) C - M C - M
+ * ----------- <= ------- <= -------- < ---------
+ * 8 N N (N - 1)
+ *
+ * So, we get:
+ *
+ * E * G * (N - 1)
+ * D = (---------------- + M) < C
+ * 8
+ *
+ * The above inequality means the position of block mark
+ * within the ECC-based view of the page is still in the data chunk,
+ * and it's NOT in the ECC bits of the chunk.
+ *
+ * Use the following to compute the bit position of the
+ * physical block mark within the ECC-based view of the page:
+ * (page_size - D) * 8
+ *
+ * --Huang Shijie
+ */
+ block_mark_bit_offset = mtd->writesize * 8 -
+ (geo->ecc_strength * geo->gf_len * (geo->ecc_chunk_count - 1)
+ + geo->metadata_size * 8);
+
+ geo->block_mark_byte_offset = block_mark_bit_offset / 8;
+ geo->block_mark_bit_offset = block_mark_bit_offset % 8;
+ return 0;
+}
+
+struct dma_chan *get_dma_chan(struct gpmi_nand_data *this)
+{
+ int chipnr = this->current_chip;
+
+ return this->dma_chans[chipnr];
+}
+
+/* Can we use the upper's buffer directly for DMA? */
+void prepare_data_dma(struct gpmi_nand_data *this, enum dma_data_direction dr)
+{
+ struct scatterlist *sgl = &this->data_sgl;
+ int ret;
+
+ this->direct_dma_map_ok = true;
+
+ /* first try to map the upper buffer directly */
+ sg_init_one(sgl, this->upper_buf, this->upper_len);
+ ret = dma_map_sg(this->dev, sgl, 1, dr);
+ if (ret == 0) {
+ /* We have to use our own DMA buffer. */
+ sg_init_one(sgl, this->data_buffer_dma, PAGE_SIZE);
+
+ if (dr == DMA_TO_DEVICE)
+ memcpy(this->data_buffer_dma, this->upper_buf,
+ this->upper_len);
+
+ ret = dma_map_sg(this->dev, sgl, 1, dr);
+ if (ret == 0)
+ pr_err("map failed.\n");
+
+ this->direct_dma_map_ok = false;
+ }
+}
+
+/* This will be called after the DMA operation is finished. */
+static void dma_irq_callback(void *param)
+{
+ struct gpmi_nand_data *this = param;
+ struct completion *dma_c = &this->dma_done;
+
+ complete(dma_c);
+
+ switch (this->dma_type) {
+ case DMA_FOR_COMMAND:
+ dma_unmap_sg(this->dev, &this->cmd_sgl, 1, DMA_TO_DEVICE);
+ break;
+
+ case DMA_FOR_READ_DATA:
+ dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_FROM_DEVICE);
+ if (this->direct_dma_map_ok == false)
+ memcpy(this->upper_buf, this->data_buffer_dma,
+ this->upper_len);
+ break;
+
+ case DMA_FOR_WRITE_DATA:
+ dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_TO_DEVICE);
+ break;
+
+ case DMA_FOR_READ_ECC_PAGE:
+ case DMA_FOR_WRITE_ECC_PAGE:
+ /* We have to wait the BCH interrupt to finish. */
+ break;
+
+ default:
+ pr_err("in wrong DMA operation.\n");
+ }
+}
+
+int start_dma_without_bch_irq(struct gpmi_nand_data *this,
+ struct dma_async_tx_descriptor *desc)
+{
+ struct completion *dma_c = &this->dma_done;
+ int err;
+
+ init_completion(dma_c);
+
+ desc->callback = dma_irq_callback;
+ desc->callback_param = this;
+ dmaengine_submit(desc);
+
+ /* Wait for the interrupt from the DMA block. */
+ err = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000));
+ if (!err) {
+ pr_err("DMA timeout, last DMA :%d\n", this->last_dma_type);
+ gpmi_dump_info(this);
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+/*
+ * This function is used in BCH reading or BCH writing pages.
+ * It will wait for the BCH interrupt as long as ONE second.
+ * Actually, we must wait for two interrupts :
+ * [1] firstly the DMA interrupt and
+ * [2] secondly the BCH interrupt.
+ */
+int start_dma_with_bch_irq(struct gpmi_nand_data *this,
+ struct dma_async_tx_descriptor *desc)
+{
+ struct completion *bch_c = &this->bch_done;
+ int err;
+
+ /* Prepare to receive an interrupt from the BCH block. */
+ init_completion(bch_c);
+
+ /* start the DMA */
+ start_dma_without_bch_irq(this, desc);
+
+ /* Wait for the interrupt from the BCH block. */
+ err = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000));
+ if (!err) {
+ pr_err("BCH timeout, last DMA :%d\n", this->last_dma_type);
+ gpmi_dump_info(this);
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+static int __devinit
+acquire_register_block(struct gpmi_nand_data *this, const char *res_name)
+{
+ struct platform_device *pdev = this->pdev;
+ struct resources *res = &this->resources;
+ struct resource *r;
+ void *p;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name);
+ if (!r) {
+ pr_err("Can't get resource for %s\n", res_name);
+ return -ENXIO;
+ }
+
+ p = ioremap(r->start, resource_size(r));
+ if (!p) {
+ pr_err("Can't remap %s\n", res_name);
+ return -ENOMEM;
+ }
+
+ if (!strcmp(res_name, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME))
+ res->gpmi_regs = p;
+ else if (!strcmp(res_name, GPMI_NAND_BCH_REGS_ADDR_RES_NAME))
+ res->bch_regs = p;
+ else
+ pr_err("unknown resource name : %s\n", res_name);
+
+ return 0;
+}
+
+static void release_register_block(struct gpmi_nand_data *this)
+{
+ struct resources *res = &this->resources;
+ if (res->gpmi_regs)
+ iounmap(res->gpmi_regs);
+ if (res->bch_regs)
+ iounmap(res->bch_regs);
+ res->gpmi_regs = NULL;
+ res->bch_regs = NULL;
+}
+
+static int __devinit
+acquire_bch_irq(struct gpmi_nand_data *this, irq_handler_t irq_h)
+{
+ struct platform_device *pdev = this->pdev;
+ struct resources *res = &this->resources;
+ const char *res_name = GPMI_NAND_BCH_INTERRUPT_RES_NAME;
+ struct resource *r;
+ int err;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
+ if (!r) {
+ pr_err("Can't get resource for %s\n", res_name);
+ return -ENXIO;
+ }
+
+ err = request_irq(r->start, irq_h, 0, res_name, this);
+ if (err) {
+ pr_err("Can't own %s\n", res_name);
+ return err;
+ }
+
+ res->bch_low_interrupt = r->start;
+ res->bch_high_interrupt = r->end;
+ return 0;
+}
+
+static void release_bch_irq(struct gpmi_nand_data *this)
+{
+ struct resources *res = &this->resources;
+ int i = res->bch_low_interrupt;
+
+ for (; i <= res->bch_high_interrupt; i++)
+ free_irq(i, this);
+}
+
+static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
+{
+ struct gpmi_nand_data *this = param;
+ struct resource *r = this->private;
+
+ if (!mxs_dma_is_apbh(chan))
+ return false;
+ /*
+ * only catch the GPMI dma channels :
+ * for mx23 : MX23_DMA_GPMI0 ~ MX23_DMA_GPMI3
+ * (These four channels share the same IRQ!)
+ *
+ * for mx28 : MX28_DMA_GPMI0 ~ MX28_DMA_GPMI7
+ * (These eight channels share the same IRQ!)
+ */
+ if (r->start <= chan->chan_id && chan->chan_id <= r->end) {
+ chan->private = &this->dma_data;
+ return true;
+ }
+ return false;
+}
+
+static void release_dma_channels(struct gpmi_nand_data *this)
+{
+ unsigned int i;
+ for (i = 0; i < DMA_CHANS; i++)
+ if (this->dma_chans[i]) {
+ dma_release_channel(this->dma_chans[i]);
+ this->dma_chans[i] = NULL;
+ }
+}
+
+static int __devinit acquire_dma_channels(struct gpmi_nand_data *this)
+{
+ struct platform_device *pdev = this->pdev;
+ struct gpmi_nand_platform_data *pdata = this->pdata;
+ struct resources *res = &this->resources;
+ struct resource *r, *r_dma;
+ unsigned int i;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_DMA,
+ GPMI_NAND_DMA_CHANNELS_RES_NAME);
+ r_dma = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
+ GPMI_NAND_DMA_INTERRUPT_RES_NAME);
+ if (!r || !r_dma) {
+ pr_err("Can't get resource for DMA\n");
+ return -ENXIO;
+ }
+
+ /* used in gpmi_dma_filter() */
+ this->private = r;
+
+ for (i = r->start; i <= r->end; i++) {
+ struct dma_chan *dma_chan;
+ dma_cap_mask_t mask;
+
+ if (i - r->start >= pdata->max_chip_count)
+ break;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ /* get the DMA interrupt */
+ if (r_dma->start == r_dma->end) {
+ /* only register the first. */
+ if (i == r->start)
+ this->dma_data.chan_irq = r_dma->start;
+ else
+ this->dma_data.chan_irq = NO_IRQ;
+ } else
+ this->dma_data.chan_irq = r_dma->start + (i - r->start);
+
+ dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
+ if (!dma_chan)
+ goto acquire_err;
+
+ /* fill the first empty item */
+ this->dma_chans[i - r->start] = dma_chan;
+ }
+
+ res->dma_low_channel = r->start;
+ res->dma_high_channel = i;
+ return 0;
+
+acquire_err:
+ pr_err("Can't acquire DMA channel %u\n", i);
+ release_dma_channels(this);
+ return -EINVAL;
+}
+
+static int __devinit acquire_resources(struct gpmi_nand_data *this)
+{
+ struct resources *res = &this->resources;
+ int ret;
+
+ ret = acquire_register_block(this, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME);
+ if (ret)
+ goto exit_regs;
+
+ ret = acquire_register_block(this, GPMI_NAND_BCH_REGS_ADDR_RES_NAME);
+ if (ret)
+ goto exit_regs;
+
+ ret = acquire_bch_irq(this, bch_irq);
+ if (ret)
+ goto exit_regs;
+
+ ret = acquire_dma_channels(this);
+ if (ret)
+ goto exit_dma_channels;
+
+ res->clock = clk_get(&this->pdev->dev, NULL);
+ if (IS_ERR(res->clock)) {
+ pr_err("can not get the clock\n");
+ ret = -ENOENT;
+ goto exit_clock;
+ }
+ return 0;
+
+exit_clock:
+ release_dma_channels(this);
+exit_dma_channels:
+ release_bch_irq(this);
+exit_regs:
+ release_register_block(this);
+ return ret;
+}
+
+static void release_resources(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+
+ clk_put(r->clock);
+ release_register_block(this);
+ release_bch_irq(this);
+ release_dma_channels(this);
+}
+
+static int __devinit init_hardware(struct gpmi_nand_data *this)
+{
+ int ret;
+
+ /*
+ * This structure contains the "safe" GPMI timing that should succeed
+ * with any NAND Flash device
+ * (although, with less-than-optimal performance).
+ */
+ struct nand_timing safe_timing = {
+ .data_setup_in_ns = 80,
+ .data_hold_in_ns = 60,
+ .address_setup_in_ns = 25,
+ .gpmi_sample_delay_in_ns = 6,
+ .tREA_in_ns = -1,
+ .tRLOH_in_ns = -1,
+ .tRHOH_in_ns = -1,
+ };
+
+ /* Initialize the hardwares. */
+ ret = gpmi_init(this);
+ if (ret)
+ return ret;
+
+ this->timing = safe_timing;
+ return 0;
+}
+
+static int read_page_prepare(struct gpmi_nand_data *this,
+ void *destination, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ void **use_virt, dma_addr_t *use_phys)
+{
+ struct device *dev = this->dev;
+
+ if (virt_addr_valid(destination)) {
+ dma_addr_t dest_phys;
+
+ dest_phys = dma_map_single(dev, destination,
+ length, DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, dest_phys)) {
+ if (alt_size < length) {
+ pr_err("Alternate buffer is too small\n");
+ return -ENOMEM;
+ }
+ goto map_failed;
+ }
+ *use_virt = destination;
+ *use_phys = dest_phys;
+ this->direct_dma_map_ok = true;
+ return 0;
+ }
+
+map_failed:
+ *use_virt = alt_virt;
+ *use_phys = alt_phys;
+ this->direct_dma_map_ok = false;
+ return 0;
+}
+
+static inline void read_page_end(struct gpmi_nand_data *this,
+ void *destination, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ void *used_virt, dma_addr_t used_phys)
+{
+ if (this->direct_dma_map_ok)
+ dma_unmap_single(this->dev, used_phys, length, DMA_FROM_DEVICE);
+}
+
+static inline void read_page_swap_end(struct gpmi_nand_data *this,
+ void *destination, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ void *used_virt, dma_addr_t used_phys)
+{
+ if (!this->direct_dma_map_ok)
+ memcpy(destination, alt_virt, length);
+}
+
+static int send_page_prepare(struct gpmi_nand_data *this,
+ const void *source, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ const void **use_virt, dma_addr_t *use_phys)
+{
+ struct device *dev = this->dev;
+
+ if (virt_addr_valid(source)) {
+ dma_addr_t source_phys;
+
+ source_phys = dma_map_single(dev, (void *)source, length,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, source_phys)) {
+ if (alt_size < length) {
+ pr_err("Alternate buffer is too small\n");
+ return -ENOMEM;
+ }
+ goto map_failed;
+ }
+ *use_virt = source;
+ *use_phys = source_phys;
+ return 0;
+ }
+map_failed:
+ /*
+ * Copy the content of the source buffer into the alternate
+ * buffer and set up the return values accordingly.
+ */
+ memcpy(alt_virt, source, length);
+
+ *use_virt = alt_virt;
+ *use_phys = alt_phys;
+ return 0;
+}
+
+static void send_page_end(struct gpmi_nand_data *this,
+ const void *source, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ const void *used_virt, dma_addr_t used_phys)
+{
+ struct device *dev = this->dev;
+ if (used_virt == source)
+ dma_unmap_single(dev, used_phys, length, DMA_TO_DEVICE);
+}
+
+static void gpmi_free_dma_buffer(struct gpmi_nand_data *this)
+{
+ struct device *dev = this->dev;
+
+ if (this->page_buffer_virt && virt_addr_valid(this->page_buffer_virt))
+ dma_free_coherent(dev, this->page_buffer_size,
+ this->page_buffer_virt,
+ this->page_buffer_phys);
+ kfree(this->cmd_buffer);
+ kfree(this->data_buffer_dma);
+
+ this->cmd_buffer = NULL;
+ this->data_buffer_dma = NULL;
+ this->page_buffer_virt = NULL;
+ this->page_buffer_size = 0;
+}
+
+/* Allocate the DMA buffers */
+static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ struct device *dev = this->dev;
+
+ /* [1] Allocate a command buffer. PAGE_SIZE is enough. */
+ this->cmd_buffer = kzalloc(PAGE_SIZE, GFP_DMA);
+ if (this->cmd_buffer == NULL)
+ goto error_alloc;
+
+ /* [2] Allocate a read/write data buffer. PAGE_SIZE is enough. */
+ this->data_buffer_dma = kzalloc(PAGE_SIZE, GFP_DMA);
+ if (this->data_buffer_dma == NULL)
+ goto error_alloc;
+
+ /*
+ * [3] Allocate the page buffer.
+ *
+ * Both the payload buffer and the auxiliary buffer must appear on
+ * 32-bit boundaries. We presume the size of the payload buffer is a
+ * power of two and is much larger than four, which guarantees the
+ * auxiliary buffer will appear on a 32-bit boundary.
+ */
+ this->page_buffer_size = geo->payload_size + geo->auxiliary_size;
+ this->page_buffer_virt = dma_alloc_coherent(dev, this->page_buffer_size,
+ &this->page_buffer_phys, GFP_DMA);
+ if (!this->page_buffer_virt)
+ goto error_alloc;
+
+
+ /* Slice up the page buffer. */
+ this->payload_virt = this->page_buffer_virt;
+ this->payload_phys = this->page_buffer_phys;
+ this->auxiliary_virt = this->payload_virt + geo->payload_size;
+ this->auxiliary_phys = this->payload_phys + geo->payload_size;
+ return 0;
+
+error_alloc:
+ gpmi_free_dma_buffer(this);
+ pr_err("allocate DMA buffer ret!!\n");
+ return -ENOMEM;
+}
+
+static void gpmi_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ int ret;
+
+ /*
+ * Every operation begins with a command byte and a series of zero or
+ * more address bytes. These are distinguished by either the Address
+ * Latch Enable (ALE) or Command Latch Enable (CLE) signals being
+ * asserted. When MTD is ready to execute the command, it will deassert
+ * both latch enables.
+ *
+ * Rather than run a separate DMA operation for every single byte, we
+ * queue them up and run a single DMA operation for the entire series
+ * of command and data bytes. NAND_CMD_NONE means the END of the queue.
+ */
+ if ((ctrl & (NAND_ALE | NAND_CLE))) {
+ if (data != NAND_CMD_NONE)
+ this->cmd_buffer[this->command_length++] = data;
+ return;
+ }
+
+ if (!this->command_length)
+ return;
+
+ ret = gpmi_send_command(this);
+ if (ret)
+ pr_err("Chip: %u, Error %d\n", this->current_chip, ret);
+
+ this->command_length = 0;
+}
+
+static int gpmi_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ return gpmi_is_ready(this, this->current_chip);
+}
+
+static void gpmi_select_chip(struct mtd_info *mtd, int chipnr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ if ((this->current_chip < 0) && (chipnr >= 0))
+ gpmi_begin(this);
+ else if ((this->current_chip >= 0) && (chipnr < 0))
+ gpmi_end(this);
+
+ this->current_chip = chipnr;
+}
+
+static void gpmi_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ pr_debug("len is %d\n", len);
+ this->upper_buf = buf;
+ this->upper_len = len;
+
+ gpmi_read_data(this);
+}
+
+static void gpmi_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ pr_debug("len is %d\n", len);
+ this->upper_buf = (uint8_t *)buf;
+ this->upper_len = len;
+
+ gpmi_send_data(this);
+}
+
+static uint8_t gpmi_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ uint8_t *buf = this->data_buffer_dma;
+
+ gpmi_read_buf(mtd, buf, 1);
+ return buf[0];
+}
+
+/*
+ * Handles block mark swapping.
+ * It can be called in swapping the block mark, or swapping it back,
+ * because the the operations are the same.
+ */
+static void block_mark_swapping(struct gpmi_nand_data *this,
+ void *payload, void *auxiliary)
+{
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ unsigned char *p;
+ unsigned char *a;
+ unsigned int bit;
+ unsigned char mask;
+ unsigned char from_data;
+ unsigned char from_oob;
+
+ if (!this->swap_block_mark)
+ return;
+
+ /*
+ * If control arrives here, we're swapping. Make some convenience
+ * variables.
+ */
+ bit = nfc_geo->block_mark_bit_offset;
+ p = payload + nfc_geo->block_mark_byte_offset;
+ a = auxiliary;
+
+ /*
+ * Get the byte from the data area that overlays the block mark. Since
+ * the ECC engine applies its own view to the bits in the page, the
+ * physical block mark won't (in general) appear on a byte boundary in
+ * the data.
+ */
+ from_data = (p[0] >> bit) | (p[1] << (8 - bit));
+
+ /* Get the byte from the OOB. */
+ from_oob = a[0];
+
+ /* Swap them. */
+ a[0] = from_data;
+
+ mask = (0x1 << bit) - 1;
+ p[0] = (p[0] & mask) | (from_oob << bit);
+
+ mask = ~0 << bit;
+ p[1] = (p[1] & mask) | (from_oob >> (8 - bit));
+}
+
+static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int page)
+{
+ struct gpmi_nand_data *this = chip->priv;
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ void *payload_virt;
+ dma_addr_t payload_phys;
+ void *auxiliary_virt;
+ dma_addr_t auxiliary_phys;
+ unsigned int i;
+ unsigned char *status;
+ unsigned int failed;
+ unsigned int corrected;
+ int ret;
+
+ pr_debug("page number is : %d\n", page);
+ ret = read_page_prepare(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ &payload_virt, &payload_phys);
+ if (ret) {
+ pr_err("Inadequate DMA buffer\n");
+ ret = -ENOMEM;
+ return ret;
+ }
+ auxiliary_virt = this->auxiliary_virt;
+ auxiliary_phys = this->auxiliary_phys;
+
+ /* go! */
+ ret = gpmi_read_page(this, payload_phys, auxiliary_phys);
+ read_page_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+ if (ret) {
+ pr_err("Error in ECC-based read: %d\n", ret);
+ goto exit_nfc;
+ }
+
+ /* handle the block mark swapping */
+ block_mark_swapping(this, payload_virt, auxiliary_virt);
+
+ /* Loop over status bytes, accumulating ECC status. */
+ failed = 0;
+ corrected = 0;
+ status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
+
+ for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
+ if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
+ continue;
+
+ if (*status == STATUS_UNCORRECTABLE) {
+ failed++;
+ continue;
+ }
+ corrected += *status;
+ }
+
+ /*
+ * Propagate ECC status to the owning MTD only when failed or
+ * corrected times nearly reaches our ECC correction threshold.
+ */
+ if (failed || corrected >= (nfc_geo->ecc_strength - 1)) {
+ mtd->ecc_stats.failed += failed;
+ mtd->ecc_stats.corrected += corrected;
+ }
+
+ /*
+ * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() for
+ * details about our policy for delivering the OOB.
+ *
+ * We fill the caller's buffer with set bits, and then copy the block
+ * mark to th caller's buffer. Note that, if block mark swapping was
+ * necessary, it has already been done, so we can rely on the first
+ * byte of the auxiliary buffer to contain the block mark.
+ */
+ memset(chip->oob_poi, ~0, mtd->oobsize);
+ chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
+
+ read_page_swap_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+exit_nfc:
+ return ret;
+}
+
+static void gpmi_ecc_write_page(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf)
+{
+ struct gpmi_nand_data *this = chip->priv;
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ const void *payload_virt;
+ dma_addr_t payload_phys;
+ const void *auxiliary_virt;
+ dma_addr_t auxiliary_phys;
+ int ret;
+
+ pr_debug("ecc write page.\n");
+ if (this->swap_block_mark) {
+ /*
+ * If control arrives here, we're doing block mark swapping.
+ * Since we can't modify the caller's buffers, we must copy them
+ * into our own.
+ */
+ memcpy(this->payload_virt, buf, mtd->writesize);
+ payload_virt = this->payload_virt;
+ payload_phys = this->payload_phys;
+
+ memcpy(this->auxiliary_virt, chip->oob_poi,
+ nfc_geo->auxiliary_size);
+ auxiliary_virt = this->auxiliary_virt;
+ auxiliary_phys = this->auxiliary_phys;
+
+ /* Handle block mark swapping. */
+ block_mark_swapping(this,
+ (void *) payload_virt, (void *) auxiliary_virt);
+ } else {
+ /*
+ * If control arrives here, we're not doing block mark swapping,
+ * so we can to try and use the caller's buffers.
+ */
+ ret = send_page_prepare(this,
+ buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ &payload_virt, &payload_phys);
+ if (ret) {
+ pr_err("Inadequate payload DMA buffer\n");
+ return;
+ }
+
+ ret = send_page_prepare(this,
+ chip->oob_poi, mtd->oobsize,
+ this->auxiliary_virt, this->auxiliary_phys,
+ nfc_geo->auxiliary_size,
+ &auxiliary_virt, &auxiliary_phys);
+ if (ret) {
+ pr_err("Inadequate auxiliary DMA buffer\n");
+ goto exit_auxiliary;
+ }
+ }
+
+ /* Ask the NFC. */
+ ret = gpmi_send_page(this, payload_phys, auxiliary_phys);
+ if (ret)
+ pr_err("Error in ECC-based write: %d\n", ret);
+
+ if (!this->swap_block_mark) {
+ send_page_end(this, chip->oob_poi, mtd->oobsize,
+ this->auxiliary_virt, this->auxiliary_phys,
+ nfc_geo->auxiliary_size,
+ auxiliary_virt, auxiliary_phys);
+exit_auxiliary:
+ send_page_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+ }
+}
+
+/*
+ * There are several places in this driver where we have to handle the OOB and
+ * block marks. This is the function where things are the most complicated, so
+ * this is where we try to explain it all. All the other places refer back to
+ * here.
+ *
+ * These are the rules, in order of decreasing importance:
+ *
+ * 1) Nothing the caller does can be allowed to imperil the block mark.
+ *
+ * 2) In read operations, the first byte of the OOB we return must reflect the
+ * true state of the block mark, no matter where that block mark appears in
+ * the physical page.
+ *
+ * 3) ECC-based read operations return an OOB full of set bits (since we never
+ * allow ECC-based writes to the OOB, it doesn't matter what ECC-based reads
+ * return).
+ *
+ * 4) "Raw" read operations return a direct view of the physical bytes in the
+ * page, using the conventional definition of which bytes are data and which
+ * are OOB. This gives the caller a way to see the actual, physical bytes
+ * in the page, without the distortions applied by our ECC engine.
+ *
+ *
+ * What we do for this specific read operation depends on two questions:
+ *
+ * 1) Are we doing a "raw" read, or an ECC-based read?
+ *
+ * 2) Are we using block mark swapping or transcription?
+ *
+ * There are four cases, illustrated by the following Karnaugh map:
+ *
+ * | Raw | ECC-based |
+ * -------------+-------------------------+-------------------------+
+ * | Read the conventional | |
+ * | OOB at the end of the | |
+ * Swapping | page and return it. It | |
+ * | contains exactly what | |
+ * | we want. | Read the block mark and |
+ * -------------+-------------------------+ return it in a buffer |
+ * | Read the conventional | full of set bits. |
+ * | OOB at the end of the | |
+ * | page and also the block | |
+ * Transcribing | mark in the metadata. | |
+ * | Copy the block mark | |
+ * | into the first byte of | |
+ * | the OOB. | |
+ * -------------+-------------------------+-------------------------+
+ *
+ * Note that we break rule #4 in the Transcribing/Raw case because we're not
+ * giving an accurate view of the actual, physical bytes in the page (we're
+ * overwriting the block mark). That's OK because it's more important to follow
+ * rule #2.
+ *
+ * It turns out that knowing whether we want an "ECC-based" or "raw" read is not
+ * easy. When reading a page, for example, the NAND Flash MTD code calls our
+ * ecc.read_page or ecc.read_page_raw function. Thus, the fact that MTD wants an
+ * ECC-based or raw view of the page is implicit in which function it calls
+ * (there is a similar pair of ECC-based/raw functions for writing).
+ *
+ * Since MTD assumes the OOB is not covered by ECC, there is no pair of
+ * ECC-based/raw functions for reading or or writing the OOB. The fact that the
+ * caller wants an ECC-based or raw view of the page is not propagated down to
+ * this driver.
+ */
+static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd)
+{
+ struct gpmi_nand_data *this = chip->priv;
+
+ pr_debug("page number is %d\n", page);
+ /* clear the OOB buffer */
+ memset(chip->oob_poi, ~0, mtd->oobsize);
+
+ /* Read out the conventional OOB. */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ /*
+ * Now, we want to make sure the block mark is correct. In the
+ * Swapping/Raw case, we already have it. Otherwise, we need to
+ * explicitly read it.
+ */
+ if (!this->swap_block_mark) {
+ /* Read the block mark into the first byte of the OOB buffer. */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+ chip->oob_poi[0] = chip->read_byte(mtd);
+ }
+
+ /*
+ * Return true, indicating that the next call to this function must send
+ * a command.
+ */
+ return true;
+}
+
+static int
+gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
+{
+ /*
+ * The BCH will use all the (page + oob).
+ * Our gpmi_hw_ecclayout can only prohibit the JFFS2 to write the oob.
+ * But it can not stop some ioctls such MEMWRITEOOB which uses
+ * MTD_OPS_PLACE_OOB. So We have to implement this function to prohibit
+ * these ioctls too.
+ */
+ return -EPERM;
+}
+
+static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ int block, ret = 0;
+ uint8_t *block_mark;
+ int column, page, status, chipnr;
+
+ /* Get block number */
+ block = (int)(ofs >> chip->bbt_erase_shift);
+ if (chip->bbt)
+ chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
+
+ /* Do we have a flash based bad block table ? */
+ if (chip->options & NAND_BBT_USE_FLASH)
+ ret = nand_update_bbt(mtd, ofs);
+ else {
+ chipnr = (int)(ofs >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
+
+ column = this->swap_block_mark ? mtd->writesize : 0;
+
+ /* Write the block mark. */
+ block_mark = this->data_buffer_dma;
+ block_mark[0] = 0; /* bad block marker */
+
+ /* Shift to get page */
+ page = (int)(ofs >> chip->page_shift);
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, column, page);
+ chip->write_buf(mtd, block_mark, 1);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ ret = -EIO;
+
+ chip->select_chip(mtd, -1);
+ }
+ if (!ret)
+ mtd->ecc_stats.badblocks++;
+
+ return ret;
+}
+
+static int __devinit nand_boot_set_geometry(struct gpmi_nand_data *this)
+{
+ struct boot_rom_geometry *geometry = &this->rom_geometry;
+
+ /*
+ * Set the boot block stride size.
+ *
+ * In principle, we should be reading this from the OTP bits, since
+ * that's where the ROM is going to get it. In fact, we don't have any
+ * way to read the OTP bits, so we go with the default and hope for the
+ * best.
+ */
+ geometry->stride_size_in_pages = 64;
+
+ /*
+ * Set the search area stride exponent.
+ *
+ * In principle, we should be reading this from the OTP bits, since
+ * that's where the ROM is going to get it. In fact, we don't have any
+ * way to read the OTP bits, so we go with the default and hope for the
+ * best.
+ */
+ geometry->search_area_stride_exponent = 2;
+ return 0;
+}
+
+static const char *fingerprint = "STMP";
+static int __devinit mx23_check_transcription_stamp(struct gpmi_nand_data *this)
+{
+ struct boot_rom_geometry *rom_geo = &this->rom_geometry;
+ struct device *dev = this->dev;
+ struct mtd_info *mtd = &this->mtd;
+ struct nand_chip *chip = &this->nand;
+ unsigned int search_area_size_in_strides;
+ unsigned int stride;
+ unsigned int page;
+ loff_t byte;
+ uint8_t *buffer = chip->buffers->databuf;
+ int saved_chip_number;
+ int found_an_ncb_fingerprint = false;
+
+ /* Compute the number of strides in a search area. */
+ search_area_size_in_strides = 1 << rom_geo->search_area_stride_exponent;
+
+ saved_chip_number = this->current_chip;
+ chip->select_chip(mtd, 0);
+
+ /*
+ * Loop through the first search area, looking for the NCB fingerprint.
+ */
+ dev_dbg(dev, "Scanning for an NCB fingerprint...\n");
+
+ for (stride = 0; stride < search_area_size_in_strides; stride++) {
+ /* Compute the page and byte addresses. */
+ page = stride * rom_geo->stride_size_in_pages;
+ byte = page * mtd->writesize;
+
+ dev_dbg(dev, "Looking for a fingerprint in page 0x%x\n", page);
+
+ /*
+ * Read the NCB fingerprint. The fingerprint is four bytes long
+ * and starts in the 12th byte of the page.
+ */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 12, page);
+ chip->read_buf(mtd, buffer, strlen(fingerprint));
+
+ /* Look for the fingerprint. */
+ if (!memcmp(buffer, fingerprint, strlen(fingerprint))) {
+ found_an_ncb_fingerprint = true;
+ break;
+ }
+
+ }
+
+ chip->select_chip(mtd, saved_chip_number);
+
+ if (found_an_ncb_fingerprint)
+ dev_dbg(dev, "\tFound a fingerprint\n");
+ else
+ dev_dbg(dev, "\tNo fingerprint found\n");
+ return found_an_ncb_fingerprint;
+}
+
+/* Writes a transcription stamp. */
+static int __devinit mx23_write_transcription_stamp(struct gpmi_nand_data *this)
+{
+ struct device *dev = this->dev;
+ struct boot_rom_geometry *rom_geo = &this->rom_geometry;
+ struct mtd_info *mtd = &this->mtd;
+ struct nand_chip *chip = &this->nand;
+ unsigned int block_size_in_pages;
+ unsigned int search_area_size_in_strides;
+ unsigned int search_area_size_in_pages;
+ unsigned int search_area_size_in_blocks;
+ unsigned int block;
+ unsigned int stride;
+ unsigned int page;
+ loff_t byte;
+ uint8_t *buffer = chip->buffers->databuf;
+ int saved_chip_number;
+ int status;
+
+ /* Compute the search area geometry. */
+ block_size_in_pages = mtd->erasesize / mtd->writesize;
+ search_area_size_in_strides = 1 << rom_geo->search_area_stride_exponent;
+ search_area_size_in_pages = search_area_size_in_strides *
+ rom_geo->stride_size_in_pages;
+ search_area_size_in_blocks =
+ (search_area_size_in_pages + (block_size_in_pages - 1)) /
+ block_size_in_pages;
+
+ dev_dbg(dev, "Search Area Geometry :\n");
+ dev_dbg(dev, "\tin Blocks : %u\n", search_area_size_in_blocks);
+ dev_dbg(dev, "\tin Strides: %u\n", search_area_size_in_strides);
+ dev_dbg(dev, "\tin Pages : %u\n", search_area_size_in_pages);
+
+ /* Select chip 0. */
+ saved_chip_number = this->current_chip;
+ chip->select_chip(mtd, 0);
+
+ /* Loop over blocks in the first search area, erasing them. */
+ dev_dbg(dev, "Erasing the search area...\n");
+
+ for (block = 0; block < search_area_size_in_blocks; block++) {
+ /* Compute the page address. */
+ page = block * block_size_in_pages;
+
+ /* Erase this block. */
+ dev_dbg(dev, "\tErasing block 0x%x\n", block);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
+
+ /* Wait for the erase to finish. */
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ dev_err(dev, "[%s] Erase failed.\n", __func__);
+ }
+
+ /* Write the NCB fingerprint into the page buffer. */
+ memset(buffer, ~0, mtd->writesize);
+ memset(chip->oob_poi, ~0, mtd->oobsize);
+ memcpy(buffer + 12, fingerprint, strlen(fingerprint));
+
+ /* Loop through the first search area, writing NCB fingerprints. */
+ dev_dbg(dev, "Writing NCB fingerprints...\n");
+ for (stride = 0; stride < search_area_size_in_strides; stride++) {
+ /* Compute the page and byte addresses. */
+ page = stride * rom_geo->stride_size_in_pages;
+ byte = page * mtd->writesize;
+
+ /* Write the first page of the current stride. */
+ dev_dbg(dev, "Writing an NCB fingerprint in page 0x%x\n", page);
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+ chip->ecc.write_page_raw(mtd, chip, buffer);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ /* Wait for the write to finish. */
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ dev_err(dev, "[%s] Write failed.\n", __func__);
+ }
+
+ /* Deselect chip 0. */
+ chip->select_chip(mtd, saved_chip_number);
+ return 0;
+}
+
+static int __devinit mx23_boot_init(struct gpmi_nand_data *this)
+{
+ struct device *dev = this->dev;
+ struct nand_chip *chip = &this->nand;
+ struct mtd_info *mtd = &this->mtd;
+ unsigned int block_count;
+ unsigned int block;
+ int chipnr;
+ int page;
+ loff_t byte;
+ uint8_t block_mark;
+ int ret = 0;
+
+ /*
+ * If control arrives here, we can't use block mark swapping, which
+ * means we're forced to use transcription. First, scan for the
+ * transcription stamp. If we find it, then we don't have to do
+ * anything -- the block marks are already transcribed.
+ */
+ if (mx23_check_transcription_stamp(this))
+ return 0;
+
+ /*
+ * If control arrives here, we couldn't find a transcription stamp, so
+ * so we presume the block marks are in the conventional location.
+ */
+ dev_dbg(dev, "Transcribing bad block marks...\n");
+
+ /* Compute the number of blocks in the entire medium. */
+ block_count = chip->chipsize >> chip->phys_erase_shift;
+
+ /*
+ * Loop over all the blocks in the medium, transcribing block marks as
+ * we go.
+ */
+ for (block = 0; block < block_count; block++) {
+ /*
+ * Compute the chip, page and byte addresses for this block's
+ * conventional mark.
+ */
+ chipnr = block >> (chip->chip_shift - chip->phys_erase_shift);
+ page = block << (chip->phys_erase_shift - chip->page_shift);
+ byte = block << chip->phys_erase_shift;
+
+ /* Send the command to read the conventional block mark. */
+ chip->select_chip(mtd, chipnr);
+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+ block_mark = chip->read_byte(mtd);
+ chip->select_chip(mtd, -1);
+
+ /*
+ * Check if the block is marked bad. If so, we need to mark it
+ * again, but this time the result will be a mark in the
+ * location where we transcribe block marks.
+ */
+ if (block_mark != 0xff) {
+ dev_dbg(dev, "Transcribing mark in block %u\n", block);
+ ret = chip->block_markbad(mtd, byte);
+ if (ret)
+ dev_err(dev, "Failed to mark block bad with "
+ "ret %d\n", ret);
+ }
+ }
+
+ /* Write the stamp that indicates we've transcribed the block marks. */
+ mx23_write_transcription_stamp(this);
+ return 0;
+}
+
+static int __devinit nand_boot_init(struct gpmi_nand_data *this)
+{
+ nand_boot_set_geometry(this);
+
+ /* This is ROM arch-specific initilization before the BBT scanning. */
+ if (GPMI_IS_MX23(this))
+ return mx23_boot_init(this);
+ return 0;
+}
+
+static int __devinit gpmi_set_geometry(struct gpmi_nand_data *this)
+{
+ int ret;
+
+ /* Free the temporary DMA memory for reading ID. */
+ gpmi_free_dma_buffer(this);
+
+ /* Set up the NFC geometry which is used by BCH. */
+ ret = bch_set_geometry(this);
+ if (ret) {
+ pr_err("set geometry ret : %d\n", ret);
+ return ret;
+ }
+
+ /* Alloc the new DMA buffers according to the pagesize and oobsize */
+ return gpmi_alloc_dma_buffer(this);
+}
+
+static int gpmi_pre_bbt_scan(struct gpmi_nand_data *this)
+{
+ int ret;
+
+ /* Set up swap_block_mark, must be set before the gpmi_set_geometry() */
+ if (GPMI_IS_MX23(this))
+ this->swap_block_mark = false;
+ else
+ this->swap_block_mark = true;
+
+ /* Set up the medium geometry */
+ ret = gpmi_set_geometry(this);
+ if (ret)
+ return ret;
+
+ /* NAND boot init, depends on the gpmi_set_geometry(). */
+ return nand_boot_init(this);
+}
+
+static int gpmi_scan_bbt(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ int ret;
+
+ /* Prepare for the BBT scan. */
+ ret = gpmi_pre_bbt_scan(this);
+ if (ret)
+ return ret;
+
+ /* use the default BBT implementation */
+ return nand_default_bbt(mtd);
+}
+
+void gpmi_nfc_exit(struct gpmi_nand_data *this)
+{
+ nand_release(&this->mtd);
+ gpmi_free_dma_buffer(this);
+}
+
+static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
+{
+ struct gpmi_nand_platform_data *pdata = this->pdata;
+ struct mtd_info *mtd = &this->mtd;
+ struct nand_chip *chip = &this->nand;
+ int ret;
+
+ /* init current chip */
+ this->current_chip = -1;
+
+ /* init the MTD data structures */
+ mtd->priv = chip;
+ mtd->name = "gpmi-nand";
+ mtd->owner = THIS_MODULE;
+
+ /* init the nand_chip{}, we don't support a 16-bit NAND Flash bus. */
+ chip->priv = this;
+ chip->select_chip = gpmi_select_chip;
+ chip->cmd_ctrl = gpmi_cmd_ctrl;
+ chip->dev_ready = gpmi_dev_ready;
+ chip->read_byte = gpmi_read_byte;
+ chip->read_buf = gpmi_read_buf;
+ chip->write_buf = gpmi_write_buf;
+ chip->ecc.read_page = gpmi_ecc_read_page;
+ chip->ecc.write_page = gpmi_ecc_write_page;
+ chip->ecc.read_oob = gpmi_ecc_read_oob;
+ chip->ecc.write_oob = gpmi_ecc_write_oob;
+ chip->scan_bbt = gpmi_scan_bbt;
+ chip->badblock_pattern = &gpmi_bbt_descr;
+ chip->block_markbad = gpmi_block_markbad;
+ chip->options |= NAND_NO_SUBPAGE_WRITE;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.size = 1;
+ chip->ecc.layout = &gpmi_hw_ecclayout;
+
+ /* Allocate a temporary DMA buffer for reading ID in the nand_scan() */
+ this->bch_geometry.payload_size = 1024;
+ this->bch_geometry.auxiliary_size = 128;
+ ret = gpmi_alloc_dma_buffer(this);
+ if (ret)
+ goto err_out;
+
+ ret = nand_scan(mtd, pdata->max_chip_count);
+ if (ret) {
+ pr_err("Chip scan failed\n");
+ goto err_out;
+ }
+
+ ret = mtd_device_parse_register(mtd, NULL, NULL,
+ pdata->partitions, pdata->partition_count);
+ if (ret)
+ goto err_out;
+ return 0;
+
+err_out:
+ gpmi_nfc_exit(this);
+ return ret;
+}
+
+static int __devinit gpmi_nand_probe(struct platform_device *pdev)
+{
+ struct gpmi_nand_platform_data *pdata = pdev->dev.platform_data;
+ struct gpmi_nand_data *this;
+ int ret;
+
+ this = kzalloc(sizeof(*this), GFP_KERNEL);
+ if (!this) {
+ pr_err("Failed to allocate per-device memory\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, this);
+ this->pdev = pdev;
+ this->dev = &pdev->dev;
+ this->pdata = pdata;
+
+ if (pdata->platform_init) {
+ ret = pdata->platform_init();
+ if (ret)
+ goto platform_init_error;
+ }
+
+ ret = acquire_resources(this);
+ if (ret)
+ goto exit_acquire_resources;
+
+ ret = init_hardware(this);
+ if (ret)
+ goto exit_nfc_init;
+
+ ret = gpmi_nfc_init(this);
+ if (ret)
+ goto exit_nfc_init;
+
+ return 0;
+
+exit_nfc_init:
+ release_resources(this);
+platform_init_error:
+exit_acquire_resources:
+ platform_set_drvdata(pdev, NULL);
+ kfree(this);
+ return ret;
+}
+
+static int __exit gpmi_nand_remove(struct platform_device *pdev)
+{
+ struct gpmi_nand_data *this = platform_get_drvdata(pdev);
+
+ gpmi_nfc_exit(this);
+ release_resources(this);
+ platform_set_drvdata(pdev, NULL);
+ kfree(this);
+ return 0;
+}
+
+static const struct platform_device_id gpmi_ids[] = {
+ {
+ .name = "imx23-gpmi-nand",
+ .driver_data = IS_MX23,
+ }, {
+ .name = "imx28-gpmi-nand",
+ .driver_data = IS_MX28,
+ }, {},
+};
+
+static struct platform_driver gpmi_nand_driver = {
+ .driver = {
+ .name = "gpmi-nand",
+ },
+ .probe = gpmi_nand_probe,
+ .remove = __exit_p(gpmi_nand_remove),
+ .id_table = gpmi_ids,
+};
+
+static int __init gpmi_nand_init(void)
+{
+ int err;
+
+ err = platform_driver_register(&gpmi_nand_driver);
+ if (err == 0)
+ printk(KERN_INFO "GPMI NAND driver registered. (IMX)\n");
+ else
+ pr_err("i.MX GPMI NAND driver registration failed\n");
+ return err;
+}
+
+static void __exit gpmi_nand_exit(void)
+{
+ platform_driver_unregister(&gpmi_nand_driver);
+}
+
+module_init(gpmi_nand_init);
+module_exit(gpmi_nand_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("i.MX GPMI NAND Flash Controller Driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H
+#define __DRIVERS_MTD_NAND_GPMI_NAND_H
+
+#include <linux/mtd/nand.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <mach/dma.h>
+
+struct resources {
+ void *gpmi_regs;
+ void *bch_regs;
+ unsigned int bch_low_interrupt;
+ unsigned int bch_high_interrupt;
+ unsigned int dma_low_channel;
+ unsigned int dma_high_channel;
+ struct clk *clock;
+};
+
+/**
+ * struct bch_geometry - BCH geometry description.
+ * @gf_len: The length of Galois Field. (e.g., 13 or 14)
+ * @ecc_strength: A number that describes the strength of the ECC
+ * algorithm.
+ * @page_size: The size, in bytes, of a physical page, including
+ * both data and OOB.
+ * @metadata_size: The size, in bytes, of the metadata.
+ * @ecc_chunk_size: The size, in bytes, of a single ECC chunk. Note
+ * the first chunk in the page includes both data and
+ * metadata, so it's a bit larger than this value.
+ * @ecc_chunk_count: The number of ECC chunks in the page,
+ * @payload_size: The size, in bytes, of the payload buffer.
+ * @auxiliary_size: The size, in bytes, of the auxiliary buffer.
+ * @auxiliary_status_offset: The offset into the auxiliary buffer at which
+ * the ECC status appears.
+ * @block_mark_byte_offset: The byte offset in the ECC-based page view at
+ * which the underlying physical block mark appears.
+ * @block_mark_bit_offset: The bit offset into the ECC-based page view at
+ * which the underlying physical block mark appears.
+ */
+struct bch_geometry {
+ unsigned int gf_len;
+ unsigned int ecc_strength;
+ unsigned int page_size;
+ unsigned int metadata_size;
+ unsigned int ecc_chunk_size;
+ unsigned int ecc_chunk_count;
+ unsigned int payload_size;
+ unsigned int auxiliary_size;
+ unsigned int auxiliary_status_offset;
+ unsigned int block_mark_byte_offset;
+ unsigned int block_mark_bit_offset;
+};
+
+/**
+ * struct boot_rom_geometry - Boot ROM geometry description.
+ * @stride_size_in_pages: The size of a boot block stride, in pages.
+ * @search_area_stride_exponent: The logarithm to base 2 of the size of a
+ * search area in boot block strides.
+ */
+struct boot_rom_geometry {
+ unsigned int stride_size_in_pages;
+ unsigned int search_area_stride_exponent;
+};
+
+/* DMA operations types */
+enum dma_ops_type {
+ DMA_FOR_COMMAND = 1,
+ DMA_FOR_READ_DATA,
+ DMA_FOR_WRITE_DATA,
+ DMA_FOR_READ_ECC_PAGE,
+ DMA_FOR_WRITE_ECC_PAGE
+};
+
+/**
+ * struct nand_timing - Fundamental timing attributes for NAND.
+ * @data_setup_in_ns: The data setup time, in nanoseconds. Usually the
+ * maximum of tDS and tWP. A negative value
+ * indicates this characteristic isn't known.
+ * @data_hold_in_ns: The data hold time, in nanoseconds. Usually the
+ * maximum of tDH, tWH and tREH. A negative value
+ * indicates this characteristic isn't known.
+ * @address_setup_in_ns: The address setup time, in nanoseconds. Usually
+ * the maximum of tCLS, tCS and tALS. A negative
+ * value indicates this characteristic isn't known.
+ * @gpmi_sample_delay_in_ns: A GPMI-specific timing parameter. A negative value
+ * indicates this characteristic isn't known.
+ * @tREA_in_ns: tREA, in nanoseconds, from the data sheet. A
+ * negative value indicates this characteristic isn't
+ * known.
+ * @tRLOH_in_ns: tRLOH, in nanoseconds, from the data sheet. A
+ * negative value indicates this characteristic isn't
+ * known.
+ * @tRHOH_in_ns: tRHOH, in nanoseconds, from the data sheet. A
+ * negative value indicates this characteristic isn't
+ * known.
+ */
+struct nand_timing {
+ int8_t data_setup_in_ns;
+ int8_t data_hold_in_ns;
+ int8_t address_setup_in_ns;
+ int8_t gpmi_sample_delay_in_ns;
+ int8_t tREA_in_ns;
+ int8_t tRLOH_in_ns;
+ int8_t tRHOH_in_ns;
+};
+
+struct gpmi_nand_data {
+ /* System Interface */
+ struct device *dev;
+ struct platform_device *pdev;
+ struct gpmi_nand_platform_data *pdata;
+
+ /* Resources */
+ struct resources resources;
+
+ /* Flash Hardware */
+ struct nand_timing timing;
+
+ /* BCH */
+ struct bch_geometry bch_geometry;
+ struct completion bch_done;
+
+ /* NAND Boot issue */
+ bool swap_block_mark;
+ struct boot_rom_geometry rom_geometry;
+
+ /* MTD / NAND */
+ struct nand_chip nand;
+ struct mtd_info mtd;
+
+ /* General-use Variables */
+ int current_chip;
+ unsigned int command_length;
+
+ /* passed from upper layer */
+ uint8_t *upper_buf;
+ int upper_len;
+
+ /* for DMA operations */
+ bool direct_dma_map_ok;
+
+ struct scatterlist cmd_sgl;
+ char *cmd_buffer;
+
+ struct scatterlist data_sgl;
+ char *data_buffer_dma;
+
+ void *page_buffer_virt;
+ dma_addr_t page_buffer_phys;
+ unsigned int page_buffer_size;
+
+ void *payload_virt;
+ dma_addr_t payload_phys;
+
+ void *auxiliary_virt;
+ dma_addr_t auxiliary_phys;
+
+ /* DMA channels */
+#define DMA_CHANS 8
+ struct dma_chan *dma_chans[DMA_CHANS];
+ struct mxs_dma_data dma_data;
+ enum dma_ops_type last_dma_type;
+ enum dma_ops_type dma_type;
+ struct completion dma_done;
+
+ /* private */
+ void *private;
+};
+
+/**
+ * struct gpmi_nfc_hardware_timing - GPMI hardware timing parameters.
+ * @data_setup_in_cycles: The data setup time, in cycles.
+ * @data_hold_in_cycles: The data hold time, in cycles.
+ * @address_setup_in_cycles: The address setup time, in cycles.
+ * @use_half_periods: Indicates the clock is running slowly, so the
+ * NFC DLL should use half-periods.
+ * @sample_delay_factor: The sample delay factor.
+ */
+struct gpmi_nfc_hardware_timing {
+ uint8_t data_setup_in_cycles;
+ uint8_t data_hold_in_cycles;
+ uint8_t address_setup_in_cycles;
+ bool use_half_periods;
+ uint8_t sample_delay_factor;
+};
+
+/**
+ * struct timing_threshod - Timing threshold
+ * @max_data_setup_cycles: The maximum number of data setup cycles that
+ * can be expressed in the hardware.
+ * @internal_data_setup_in_ns: The time, in ns, that the NFC hardware requires
+ * for data read internal setup. In the Reference
+ * Manual, see the chapter "High-Speed NAND
+ * Timing" for more details.
+ * @max_sample_delay_factor: The maximum sample delay factor that can be
+ * expressed in the hardware.
+ * @max_dll_clock_period_in_ns: The maximum period of the GPMI clock that the
+ * sample delay DLL hardware can possibly work
+ * with (the DLL is unusable with longer periods).
+ * If the full-cycle period is greater than HALF
+ * this value, the DLL must be configured to use
+ * half-periods.
+ * @max_dll_delay_in_ns: The maximum amount of delay, in ns, that the
+ * DLL can implement.
+ * @clock_frequency_in_hz: The clock frequency, in Hz, during the current
+ * I/O transaction. If no I/O transaction is in
+ * progress, this is the clock frequency during
+ * the most recent I/O transaction.
+ */
+struct timing_threshod {
+ const unsigned int max_chip_count;
+ const unsigned int max_data_setup_cycles;
+ const unsigned int internal_data_setup_in_ns;
+ const unsigned int max_sample_delay_factor;
+ const unsigned int max_dll_clock_period_in_ns;
+ const unsigned int max_dll_delay_in_ns;
+ unsigned long clock_frequency_in_hz;
+
+};
+
+/* Common Services */
+extern int common_nfc_set_geometry(struct gpmi_nand_data *);
+extern struct dma_chan *get_dma_chan(struct gpmi_nand_data *);
+extern void prepare_data_dma(struct gpmi_nand_data *,
+ enum dma_data_direction dr);
+extern int start_dma_without_bch_irq(struct gpmi_nand_data *,
+ struct dma_async_tx_descriptor *);
+extern int start_dma_with_bch_irq(struct gpmi_nand_data *,
+ struct dma_async_tx_descriptor *);
+
+/* GPMI-NAND helper function library */
+extern int gpmi_init(struct gpmi_nand_data *);
+extern void gpmi_clear_bch(struct gpmi_nand_data *);
+extern void gpmi_dump_info(struct gpmi_nand_data *);
+extern int bch_set_geometry(struct gpmi_nand_data *);
+extern int gpmi_is_ready(struct gpmi_nand_data *, unsigned chip);
+extern int gpmi_send_command(struct gpmi_nand_data *);
+extern void gpmi_begin(struct gpmi_nand_data *);
+extern void gpmi_end(struct gpmi_nand_data *);
+extern int gpmi_read_data(struct gpmi_nand_data *);
+extern int gpmi_send_data(struct gpmi_nand_data *);
+extern int gpmi_send_page(struct gpmi_nand_data *,
+ dma_addr_t payload, dma_addr_t auxiliary);
+extern int gpmi_read_page(struct gpmi_nand_data *,
+ dma_addr_t payload, dma_addr_t auxiliary);
+
+/* BCH : Status Block Completion Codes */
+#define STATUS_GOOD 0x00
+#define STATUS_ERASED 0xff
+#define STATUS_UNCORRECTABLE 0xfe
+
+/* Use the platform_id to distinguish different Archs. */
+#define IS_MX23 0x1
+#define IS_MX28 0x2
+#define GPMI_IS_MX23(x) ((x)->pdev->id_entry->driver_data == IS_MX23)
+#define GPMI_IS_MX28(x) ((x)->pdev->id_entry->driver_data == IS_MX28)
+#endif
--- /dev/null
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __GPMI_NAND_GPMI_REGS_H
+#define __GPMI_NAND_GPMI_REGS_H
+
+#define HW_GPMI_CTRL0 0x00000000
+#define HW_GPMI_CTRL0_SET 0x00000004
+#define HW_GPMI_CTRL0_CLR 0x00000008
+#define HW_GPMI_CTRL0_TOG 0x0000000c
+
+#define BP_GPMI_CTRL0_COMMAND_MODE 24
+#define BM_GPMI_CTRL0_COMMAND_MODE (3 << BP_GPMI_CTRL0_COMMAND_MODE)
+#define BF_GPMI_CTRL0_COMMAND_MODE(v) \
+ (((v) << BP_GPMI_CTRL0_COMMAND_MODE) & BM_GPMI_CTRL0_COMMAND_MODE)
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3
+
+#define BM_GPMI_CTRL0_WORD_LENGTH (1 << 23)
+#define BV_GPMI_CTRL0_WORD_LENGTH__16_BIT 0x0
+#define BV_GPMI_CTRL0_WORD_LENGTH__8_BIT 0x1
+
+/*
+ * Difference in LOCK_CS between imx23 and imx28 :
+ * This bit may impact the _POWER_ consumption. So some chips
+ * do not set it.
+ */
+#define MX23_BP_GPMI_CTRL0_LOCK_CS 22
+#define MX28_BP_GPMI_CTRL0_LOCK_CS 27
+#define LOCK_CS_ENABLE 0x1
+#define BF_GPMI_CTRL0_LOCK_CS(v, x) 0x0
+
+/* Difference in CS between imx23 and imx28 */
+#define BP_GPMI_CTRL0_CS 20
+#define MX23_BM_GPMI_CTRL0_CS (3 << BP_GPMI_CTRL0_CS)
+#define MX28_BM_GPMI_CTRL0_CS (7 << BP_GPMI_CTRL0_CS)
+#define BF_GPMI_CTRL0_CS(v, x) (((v) << BP_GPMI_CTRL0_CS) & \
+ (GPMI_IS_MX23((x)) \
+ ? MX23_BM_GPMI_CTRL0_CS \
+ : MX28_BM_GPMI_CTRL0_CS))
+
+#define BP_GPMI_CTRL0_ADDRESS 17
+#define BM_GPMI_CTRL0_ADDRESS (3 << BP_GPMI_CTRL0_ADDRESS)
+#define BF_GPMI_CTRL0_ADDRESS(v) \
+ (((v) << BP_GPMI_CTRL0_ADDRESS) & BM_GPMI_CTRL0_ADDRESS)
+#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA 0x0
+#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE 0x1
+#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE 0x2
+
+#define BM_GPMI_CTRL0_ADDRESS_INCREMENT (1 << 16)
+#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__DISABLED 0x0
+#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__ENABLED 0x1
+
+#define BP_GPMI_CTRL0_XFER_COUNT 0
+#define BM_GPMI_CTRL0_XFER_COUNT (0xffff << BP_GPMI_CTRL0_XFER_COUNT)
+#define BF_GPMI_CTRL0_XFER_COUNT(v) \
+ (((v) << BP_GPMI_CTRL0_XFER_COUNT) & BM_GPMI_CTRL0_XFER_COUNT)
+
+#define HW_GPMI_COMPARE 0x00000010
+
+#define HW_GPMI_ECCCTRL 0x00000020
+#define HW_GPMI_ECCCTRL_SET 0x00000024
+#define HW_GPMI_ECCCTRL_CLR 0x00000028
+#define HW_GPMI_ECCCTRL_TOG 0x0000002c
+
+#define BP_GPMI_ECCCTRL_ECC_CMD 13
+#define BM_GPMI_ECCCTRL_ECC_CMD (3 << BP_GPMI_ECCCTRL_ECC_CMD)
+#define BF_GPMI_ECCCTRL_ECC_CMD(v) \
+ (((v) << BP_GPMI_ECCCTRL_ECC_CMD) & BM_GPMI_ECCCTRL_ECC_CMD)
+#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE 0x0
+#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE 0x1
+
+#define BM_GPMI_ECCCTRL_ENABLE_ECC (1 << 12)
+#define BV_GPMI_ECCCTRL_ENABLE_ECC__ENABLE 0x1
+#define BV_GPMI_ECCCTRL_ENABLE_ECC__DISABLE 0x0
+
+#define BP_GPMI_ECCCTRL_BUFFER_MASK 0
+#define BM_GPMI_ECCCTRL_BUFFER_MASK (0x1ff << BP_GPMI_ECCCTRL_BUFFER_MASK)
+#define BF_GPMI_ECCCTRL_BUFFER_MASK(v) \
+ (((v) << BP_GPMI_ECCCTRL_BUFFER_MASK) & BM_GPMI_ECCCTRL_BUFFER_MASK)
+#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY 0x100
+#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE 0x1FF
+
+#define HW_GPMI_ECCCOUNT 0x00000030
+#define HW_GPMI_PAYLOAD 0x00000040
+#define HW_GPMI_AUXILIARY 0x00000050
+#define HW_GPMI_CTRL1 0x00000060
+#define HW_GPMI_CTRL1_SET 0x00000064
+#define HW_GPMI_CTRL1_CLR 0x00000068
+#define HW_GPMI_CTRL1_TOG 0x0000006c
+
+#define BM_GPMI_CTRL1_BCH_MODE (1 << 18)
+
+#define BP_GPMI_CTRL1_DLL_ENABLE 17
+#define BM_GPMI_CTRL1_DLL_ENABLE (1 << BP_GPMI_CTRL1_DLL_ENABLE)
+
+#define BP_GPMI_CTRL1_HALF_PERIOD 16
+#define BM_GPMI_CTRL1_HALF_PERIOD (1 << BP_GPMI_CTRL1_HALF_PERIOD)
+
+#define BP_GPMI_CTRL1_RDN_DELAY 12
+#define BM_GPMI_CTRL1_RDN_DELAY (0xf << BP_GPMI_CTRL1_RDN_DELAY)
+#define BF_GPMI_CTRL1_RDN_DELAY(v) \
+ (((v) << BP_GPMI_CTRL1_RDN_DELAY) & BM_GPMI_CTRL1_RDN_DELAY)
+
+#define BM_GPMI_CTRL1_DEV_RESET (1 << 3)
+#define BV_GPMI_CTRL1_DEV_RESET__ENABLED 0x0
+#define BV_GPMI_CTRL1_DEV_RESET__DISABLED 0x1
+
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY (1 << 2)
+#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVELOW 0x0
+#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVEHIGH 0x1
+
+#define BM_GPMI_CTRL1_CAMERA_MODE (1 << 1)
+#define BV_GPMI_CTRL1_GPMI_MODE__NAND 0x0
+#define BV_GPMI_CTRL1_GPMI_MODE__ATA 0x1
+
+#define BM_GPMI_CTRL1_GPMI_MODE (1 << 0)
+
+#define HW_GPMI_TIMING0 0x00000070
+
+#define BP_GPMI_TIMING0_ADDRESS_SETUP 16
+#define BM_GPMI_TIMING0_ADDRESS_SETUP (0xff << BP_GPMI_TIMING0_ADDRESS_SETUP)
+#define BF_GPMI_TIMING0_ADDRESS_SETUP(v) \
+ (((v) << BP_GPMI_TIMING0_ADDRESS_SETUP) & BM_GPMI_TIMING0_ADDRESS_SETUP)
+
+#define BP_GPMI_TIMING0_DATA_HOLD 8
+#define BM_GPMI_TIMING0_DATA_HOLD (0xff << BP_GPMI_TIMING0_DATA_HOLD)
+#define BF_GPMI_TIMING0_DATA_HOLD(v) \
+ (((v) << BP_GPMI_TIMING0_DATA_HOLD) & BM_GPMI_TIMING0_DATA_HOLD)
+
+#define BP_GPMI_TIMING0_DATA_SETUP 0
+#define BM_GPMI_TIMING0_DATA_SETUP (0xff << BP_GPMI_TIMING0_DATA_SETUP)
+#define BF_GPMI_TIMING0_DATA_SETUP(v) \
+ (((v) << BP_GPMI_TIMING0_DATA_SETUP) & BM_GPMI_TIMING0_DATA_SETUP)
+
+#define HW_GPMI_TIMING1 0x00000080
+#define BP_GPMI_TIMING1_BUSY_TIMEOUT 16
+
+#define HW_GPMI_TIMING2 0x00000090
+#define HW_GPMI_DATA 0x000000a0
+
+/* MX28 uses this to detect READY. */
+#define HW_GPMI_STAT 0x000000b0
+#define MX28_BP_GPMI_STAT_READY_BUSY 24
+#define MX28_BM_GPMI_STAT_READY_BUSY (0xff << MX28_BP_GPMI_STAT_READY_BUSY)
+#define MX28_BF_GPMI_STAT_READY_BUSY(v) \
+ (((v) << MX28_BP_GPMI_STAT_READY_BUSY) & MX28_BM_GPMI_STAT_READY_BUSY)
+
+/* MX23 uses this to detect READY. */
+#define HW_GPMI_DEBUG 0x000000c0
+#define MX23_BP_GPMI_DEBUG_READY0 28
+#define MX23_BM_GPMI_DEBUG_READY0 (1 << MX23_BP_GPMI_DEBUG_READY0)
+#endif
static int __init h1910_init(void)
{
struct nand_chip *this;
- const char *part_type = 0;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = 0;
void __iomem *nandaddr;
if (!machine_is_h1900())
iounmap((void *)nandaddr);
return -ENXIO;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- mtd_parts_nb = parse_cmdline_partitions(h1910_nand_mtd, &mtd_parts, "h1910-nand");
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-#endif
- if (mtd_parts_nb == 0) {
- mtd_parts = partition_info;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
/* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- mtd_device_register(h1910_nand_mtd, mtd_parts, mtd_parts_nb);
+ mtd_device_parse_register(h1910_nand_mtd, NULL, 0,
+ partition_info, NUM_PARTITIONS);
/* Return happy */
return 0;
return 0;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static const char *part_probes[] = {"cmdline", NULL};
-#endif
-
static int jz_nand_ioremap_resource(struct platform_device *pdev,
const char *name, struct resource **res, void __iomem **base)
{
struct nand_chip *chip;
struct mtd_info *mtd;
struct jz_nand_platform_data *pdata = pdev->dev.platform_data;
- struct mtd_partition *partition_info;
- int num_partitions = 0;
nand = kzalloc(sizeof(*nand), GFP_KERNEL);
if (!nand) {
goto err_gpio_free;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- num_partitions = parse_mtd_partitions(mtd, part_probes,
- &partition_info, 0);
-#endif
- if (num_partitions <= 0 && pdata) {
- num_partitions = pdata->num_partitions;
- partition_info = pdata->partitions;
- }
- ret = mtd_device_register(mtd, partition_info, num_partitions);
+ ret = mtd_device_parse_register(mtd, NULL, 0,
+ pdata ? pdata->partitions : NULL,
+ pdata ? pdata->num_partitions : 0);
if (ret) {
dev_err(&pdev->dev, "Failed to add mtd device\n");
static void mpc5121_nfc_done(struct mtd_info *mtd);
-static const char *mpc5121_nfc_pprobes[] = { "cmdlinepart", NULL };
-
/* Read NFC register */
static inline u16 nfc_read(struct mtd_info *mtd, uint reg)
{
struct mpc5121_nfc_prv *prv;
struct resource res;
struct mtd_info *mtd;
- struct mtd_partition *parts;
struct nand_chip *chip;
unsigned long regs_paddr, regs_size;
const __be32 *chips_no;
int resettime = 0;
int retval = 0;
int rev, len;
+ struct mtd_part_parser_data ppdata;
/*
* Check SoC revision. This driver supports only NFC
}
mtd->name = "MPC5121 NAND";
+ ppdata.of_node = dn;
chip->dev_ready = mpc5121_nfc_dev_ready;
chip->cmdfunc = mpc5121_nfc_command;
chip->read_byte = mpc5121_nfc_read_byte;
chip->write_buf = mpc5121_nfc_write_buf;
chip->verify_buf = mpc5121_nfc_verify_buf;
chip->select_chip = mpc5121_nfc_select_chip;
- chip->options = NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT;
+ chip->options = NAND_NO_AUTOINCR;
+ chip->bbt_options = NAND_BBT_USE_FLASH;
chip->ecc.mode = NAND_ECC_SOFT;
/* Support external chip-select logic on ADS5121 board */
dev_set_drvdata(dev, mtd);
/* Register device in MTD */
- retval = parse_mtd_partitions(mtd, mpc5121_nfc_pprobes, &parts, 0);
-#ifdef CONFIG_MTD_OF_PARTS
- if (retval == 0)
- retval = of_mtd_parse_partitions(dev, dn, &parts);
-#endif
- if (retval < 0) {
- dev_err(dev, "Error parsing MTD partitions!\n");
- devm_free_irq(dev, prv->irq, mtd);
- retval = -EINVAL;
- goto error;
- }
-
- retval = mtd_device_register(mtd, parts, retval);
+ retval = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
if (retval) {
dev_err(dev, "Error adding MTD device!\n");
devm_free_irq(dev, prv->irq, mtd);
#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35())
#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
-#define nfc_is_v3_2() cpu_is_mx51()
+#define nfc_is_v3_2() (cpu_is_mx51() || cpu_is_mx53())
#define nfc_is_v3() nfc_is_v3_2()
/* Addresses for NFC registers */
struct mxc_nand_host {
struct mtd_info mtd;
struct nand_chip nand;
- struct mtd_partition *parts;
struct device *dev;
void *spare0;
udelay(1);
}
if (max_retries < 0)
- DEBUG(MTD_DEBUG_LEVEL0, "%s: INT not set\n",
- __func__);
+ pr_debug("%s: INT not set\n", __func__);
}
}
* waits for completion. */
static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
{
- DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
+ pr_debug("send_cmd(host, 0x%x, %d)\n", cmd, useirq);
writew(cmd, NFC_V1_V2_FLASH_CMD);
writew(NFC_CMD, NFC_V1_V2_CONFIG2);
udelay(1);
}
if (max_retries < 0)
- DEBUG(MTD_DEBUG_LEVEL0, "%s: RESET failed\n",
- __func__);
+ pr_debug("%s: RESET failed\n", __func__);
} else {
/* Wait for operation to complete */
wait_op_done(host, useirq);
* a NAND command. */
static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
{
- DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast);
+ pr_debug("send_addr(host, 0x%x %d)\n", addr, islast);
writew(addr, NFC_V1_V2_FLASH_ADDR);
writew(NFC_ADDR, NFC_V1_V2_CONFIG2);
uint16_t ecc_status = readw(NFC_V1_V2_ECC_STATUS_RESULT);
if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
+ pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
return -1;
}
writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR3);
} else if (nfc_is_v1()) {
writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
- writew(0x4000, NFC_V1_UNLOCKEND_BLKADDR);
+ writew(0xffff, NFC_V1_UNLOCKEND_BLKADDR);
} else
BUG();
struct nand_chip *nand_chip = mtd->priv;
struct mxc_nand_host *host = nand_chip->priv;
- DEBUG(MTD_DEBUG_LEVEL3,
- "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
+ pr_debug("mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
command, column, page_addr);
/* Reset command state information */
struct mxc_nand_platform_data *pdata = pdev->dev.platform_data;
struct mxc_nand_host *host;
struct resource *res;
- int err = 0, __maybe_unused nr_parts = 0;
+ int err = 0;
struct nand_ecclayout *oob_smallpage, *oob_largepage;
/* Allocate memory for MTD device structure and private data */
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
/* update flash based bbt */
- this->options |= NAND_USE_FLASH_BBT;
+ this->bbt_options |= NAND_BBT_USE_FLASH;
}
init_completion(&host->op_completion);
}
/* Register the partitions */
- nr_parts =
- parse_mtd_partitions(mtd, part_probes, &host->parts, 0);
- if (nr_parts > 0)
- mtd_device_register(mtd, host->parts, nr_parts);
- else if (pdata->parts)
- mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
- else {
- pr_info("Registering %s as whole device\n", mtd->name);
- mtd_device_register(mtd, NULL, 0);
- }
+ mtd_device_parse_register(mtd, part_probes, 0,
+ pdata->parts, pdata->nr_parts);
platform_set_drvdata(pdev, host);
* TODO:
* Enable cached programming for 2k page size chips
* Check, if mtd->ecctype should be set to MTD_ECC_HW
- * if we have HW ecc support.
+ * if we have HW ECC support.
* The AG-AND chips have nice features for speed improvement,
* which are not supported yet. Read / program 4 pages in one go.
* BBT table is not serialized, has to be fixed
/* Start address must align on block boundary */
if (ofs & ((1 << chip->phys_erase_shift) - 1)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Unaligned address\n", __func__);
+ pr_debug("%s: unaligned address\n", __func__);
ret = -EINVAL;
}
/* Length must align on block boundary */
if (len & ((1 << chip->phys_erase_shift) - 1)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Length not block aligned\n",
- __func__);
+ pr_debug("%s: length not block aligned\n", __func__);
ret = -EINVAL;
}
/* Do not allow past end of device */
if (ofs + len > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Past end of device\n",
- __func__);
+ pr_debug("%s: past end of device\n", __func__);
ret = -EINVAL;
}
/**
* nand_release_device - [GENERIC] release chip
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Deselect, release chip lock and wake up anyone waiting on the device
+ * Deselect, release chip lock and wake up anyone waiting on the device.
*/
static void nand_release_device(struct mtd_info *mtd)
{
/**
* nand_read_byte - [DEFAULT] read one byte from the chip
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Default read function for 8bit buswith
+ * Default read function for 8bit buswidth
*/
static uint8_t nand_read_byte(struct mtd_info *mtd)
{
/**
* nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip
- * @mtd: MTD device structure
+ * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
+ * @mtd: MTD device structure
+ *
+ * Default read function for 16bit buswidth with endianness conversion.
*
- * Default read function for 16bit buswith with
- * endianess conversion
*/
static uint8_t nand_read_byte16(struct mtd_info *mtd)
{
/**
* nand_read_word - [DEFAULT] read one word from the chip
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Default read function for 16bit buswith without
- * endianess conversion
+ * Default read function for 16bit buswidth without endianness conversion.
*/
static u16 nand_read_word(struct mtd_info *mtd)
{
/**
* nand_select_chip - [DEFAULT] control CE line
- * @mtd: MTD device structure
- * @chipnr: chipnumber to select, -1 for deselect
+ * @mtd: MTD device structure
+ * @chipnr: chipnumber to select, -1 for deselect
*
* Default select function for 1 chip devices.
*/
/**
* nand_write_buf - [DEFAULT] write buffer to chip
- * @mtd: MTD device structure
- * @buf: data buffer
- * @len: number of bytes to write
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
*
- * Default write function for 8bit buswith
+ * Default write function for 8bit buswidth.
*/
static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
/**
* nand_read_buf - [DEFAULT] read chip data into buffer
- * @mtd: MTD device structure
- * @buf: buffer to store date
- * @len: number of bytes to read
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
*
- * Default read function for 8bit buswith
+ * Default read function for 8bit buswidth.
*/
static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
/**
* nand_verify_buf - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
*
- * Default verify function for 8bit buswith
+ * Default verify function for 8bit buswidth.
*/
static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
/**
* nand_write_buf16 - [DEFAULT] write buffer to chip
- * @mtd: MTD device structure
- * @buf: data buffer
- * @len: number of bytes to write
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
*
- * Default write function for 16bit buswith
+ * Default write function for 16bit buswidth.
*/
static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
{
/**
* nand_read_buf16 - [DEFAULT] read chip data into buffer
- * @mtd: MTD device structure
- * @buf: buffer to store date
- * @len: number of bytes to read
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
*
- * Default read function for 16bit buswith
+ * Default read function for 16bit buswidth.
*/
static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
{
/**
* nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
*
- * Default verify function for 16bit buswith
+ * Default verify function for 16bit buswidth.
*/
static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
{
/**
* nand_block_bad - [DEFAULT] Read bad block marker from the chip
- * @mtd: MTD device structure
- * @ofs: offset from device start
- * @getchip: 0, if the chip is already selected
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
*
* Check, if the block is bad.
*/
struct nand_chip *chip = mtd->priv;
u16 bad;
- if (chip->options & NAND_BBT_SCANLASTPAGE)
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
ofs += mtd->erasesize - mtd->writesize;
page = (int)(ofs >> chip->page_shift) & chip->pagemask;
/**
* nand_default_block_markbad - [DEFAULT] mark a block bad
- * @mtd: MTD device structure
- * @ofs: offset from device start
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
*
- * This is the default implementation, which can be overridden by
- * a hardware specific driver.
+ * This is the default implementation, which can be overridden by a hardware
+ * specific driver.
*/
static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
uint8_t buf[2] = { 0, 0 };
int block, ret, i = 0;
- if (chip->options & NAND_BBT_SCANLASTPAGE)
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
ofs += mtd->erasesize - mtd->writesize;
/* Get block number */
if (chip->bbt)
chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
- /* Do we have a flash based bad block table ? */
- if (chip->options & NAND_USE_FLASH_BBT)
+ /* Do we have a flash based bad block table? */
+ if (chip->bbt_options & NAND_BBT_USE_FLASH)
ret = nand_update_bbt(mtd, ofs);
else {
+ struct mtd_oob_ops ops;
+
nand_get_device(chip, mtd, FL_WRITING);
- /* Write to first two pages and to byte 1 and 6 if necessary.
- * If we write to more than one location, the first error
- * encountered quits the procedure. We write two bytes per
- * location, so we dont have to mess with 16 bit access.
+ /*
+ * Write to first two pages if necessary. If we write to more
+ * than one location, the first error encountered quits the
+ * procedure. We write two bytes per location, so we dont have
+ * to mess with 16 bit access.
*/
+ ops.len = ops.ooblen = 2;
+ ops.datbuf = NULL;
+ ops.oobbuf = buf;
+ ops.ooboffs = chip->badblockpos & ~0x01;
+ ops.mode = MTD_OPS_PLACE_OOB;
do {
- chip->ops.len = chip->ops.ooblen = 2;
- chip->ops.datbuf = NULL;
- chip->ops.oobbuf = buf;
- chip->ops.ooboffs = chip->badblockpos & ~0x01;
-
- ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+ ret = nand_do_write_oob(mtd, ofs, &ops);
- if (!ret && (chip->options & NAND_BBT_SCANBYTE1AND6)) {
- chip->ops.ooboffs = NAND_SMALL_BADBLOCK_POS
- & ~0x01;
- ret = nand_do_write_oob(mtd, ofs, &chip->ops);
- }
i++;
ofs += mtd->writesize;
- } while (!ret && (chip->options & NAND_BBT_SCAN2NDPAGE) &&
+ } while (!ret && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE) &&
i < 2);
nand_release_device(mtd);
/**
* nand_check_wp - [GENERIC] check if the chip is write protected
- * @mtd: MTD device structure
- * Check, if the device is write protected
+ * @mtd: MTD device structure
*
- * The function expects, that the device is already selected
+ * Check, if the device is write protected. The function expects, that the
+ * device is already selected.
*/
static int nand_check_wp(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- /* broken xD cards report WP despite being writable */
+ /* Broken xD cards report WP despite being writable */
if (chip->options & NAND_BROKEN_XD)
return 0;
/**
* nand_block_checkbad - [GENERIC] Check if a block is marked bad
- * @mtd: MTD device structure
- * @ofs: offset from device start
- * @getchip: 0, if the chip is already selected
- * @allowbbt: 1, if its allowed to access the bbt area
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
+ * @allowbbt: 1, if its allowed to access the bbt area
*
* Check, if the block is bad. Either by reading the bad block table or
* calling of the scan function.
/**
* panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
- * @mtd: MTD device structure
- * @timeo: Timeout
+ * @mtd: MTD device structure
+ * @timeo: Timeout
*
* Helper function for nand_wait_ready used when needing to wait in interrupt
* context.
}
}
-/*
- * Wait for the ready pin, after a command
- * The timeout is catched later.
- */
+/* Wait for the ready pin, after a command. The timeout is caught later. */
void nand_wait_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
return panic_nand_wait_ready(mtd, 400);
led_trigger_event(nand_led_trigger, LED_FULL);
- /* wait until command is processed or timeout occures */
+ /* Wait until command is processed or timeout occurs */
do {
if (chip->dev_ready(mtd))
break;
/**
* nand_command - [DEFAULT] Send command to NAND device
- * @mtd: MTD device structure
- * @command: the command to be sent
- * @column: the column address for this command, -1 if none
- * @page_addr: the page address for this command, -1 if none
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
*
- * Send command to NAND device. This function is used for small page
- * devices (256/512 Bytes per page)
+ * Send command to NAND device. This function is used for small page devices
+ * (256/512 Bytes per page).
*/
static void nand_command(struct mtd_info *mtd, unsigned int command,
int column, int page_addr)
register struct nand_chip *chip = mtd->priv;
int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
- /*
- * Write out the command to the device.
- */
+ /* Write out the command to the device */
if (command == NAND_CMD_SEQIN) {
int readcmd;
}
chip->cmd_ctrl(mtd, command, ctrl);
- /*
- * Address cycle, when necessary
- */
+ /* Address cycle, when necessary */
ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE;
/* Serially input address */
if (column != -1) {
chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
- * program and erase have their own busy handlers
- * status and sequential in needs no delay
+ * Program and erase have their own busy handlers status and sequential
+ * in needs no delay
*/
switch (command) {
return;
}
}
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine.
+ */
ndelay(100);
nand_wait_ready(mtd);
/**
* nand_command_lp - [DEFAULT] Send command to NAND large page device
- * @mtd: MTD device structure
- * @command: the command to be sent
- * @column: the column address for this command, -1 if none
- * @page_addr: the page address for this command, -1 if none
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
*
* Send command to NAND device. This is the version for the new large page
- * devices We dont have the separate regions as we have in the small page
- * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
+ * devices. We don't have the separate regions as we have in the small page
+ * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
*/
static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
int column, int page_addr)
chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
- * program and erase have their own busy handlers
- * status, sequential in, and deplete1 need no delay
+ * Program and erase have their own busy handlers status, sequential
+ * in, and deplete1 need no delay.
*/
switch (command) {
case NAND_CMD_DEPLETE1:
return;
- /*
- * read error status commands require only a short delay
- */
case NAND_CMD_STATUS_ERROR:
case NAND_CMD_STATUS_ERROR0:
case NAND_CMD_STATUS_ERROR1:
case NAND_CMD_STATUS_ERROR2:
case NAND_CMD_STATUS_ERROR3:
+ /* Read error status commands require only a short delay */
udelay(chip->chip_delay);
return;
default:
/*
* If we don't have access to the busy pin, we apply the given
- * command delay
+ * command delay.
*/
if (!chip->dev_ready) {
udelay(chip->chip_delay);
}
}
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine.
+ */
ndelay(100);
nand_wait_ready(mtd);
/**
* panic_nand_get_device - [GENERIC] Get chip for selected access
- * @chip: the nand chip descriptor
- * @mtd: MTD device structure
- * @new_state: the state which is requested
+ * @chip: the nand chip descriptor
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
*
* Used when in panic, no locks are taken.
*/
static void panic_nand_get_device(struct nand_chip *chip,
struct mtd_info *mtd, int new_state)
{
- /* Hardware controller shared among independend devices */
+ /* Hardware controller shared among independent devices */
chip->controller->active = chip;
chip->state = new_state;
}
/**
* nand_get_device - [GENERIC] Get chip for selected access
- * @chip: the nand chip descriptor
- * @mtd: MTD device structure
- * @new_state: the state which is requested
+ * @chip: the nand chip descriptor
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
*
* Get the device and lock it for exclusive access
*/
}
/**
- * panic_nand_wait - [GENERIC] wait until the command is done
- * @mtd: MTD device structure
- * @chip: NAND chip structure
- * @timeo: Timeout
+ * panic_nand_wait - [GENERIC] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
+ * @timeo: timeout
*
* Wait for command done. This is a helper function for nand_wait used when
* we are in interrupt context. May happen when in panic and trying to write
}
/**
- * nand_wait - [DEFAULT] wait until the command is done
- * @mtd: MTD device structure
- * @chip: NAND chip structure
+ * nand_wait - [DEFAULT] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
*
- * Wait for command done. This applies to erase and program only
- * Erase can take up to 400ms and program up to 20ms according to
- * general NAND and SmartMedia specs
+ * Wait for command done. This applies to erase and program only. Erase can
+ * take up to 400ms and program up to 20ms according to general NAND and
+ * SmartMedia specs.
*/
static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
led_trigger_event(nand_led_trigger, LED_FULL);
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in any
+ * case on any machine.
+ */
ndelay(100);
if ((state == FL_ERASING) && (chip->options & NAND_IS_AND))
/**
* __nand_unlock - [REPLACEABLE] unlocks specified locked blocks
- *
* @mtd: mtd info
* @ofs: offset to start unlock from
* @len: length to unlock
- * @invert: when = 0, unlock the range of blocks within the lower and
- * upper boundary address
- * when = 1, unlock the range of blocks outside the boundaries
- * of the lower and upper boundary address
+ * @invert: when = 0, unlock the range of blocks within the lower and
+ * upper boundary address
+ * when = 1, unlock the range of blocks outside the boundaries
+ * of the lower and upper boundary address
*
- * return - unlock status
+ * Returs unlock status.
*/
static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
uint64_t len, int invert)
/* Call wait ready function */
status = chip->waitfunc(mtd, chip);
- udelay(1000);
/* See if device thinks it succeeded */
if (status & 0x01) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Error status = 0x%08x\n",
+ pr_debug("%s: error status = 0x%08x\n",
__func__, status);
ret = -EIO;
}
/**
* nand_unlock - [REPLACEABLE] unlocks specified locked blocks
- *
* @mtd: mtd info
* @ofs: offset to start unlock from
* @len: length to unlock
*
- * return - unlock status
+ * Returns unlock status.
*/
int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
int chipnr;
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
__func__, (unsigned long long)ofs, len);
if (check_offs_len(mtd, ofs, len))
/* Check, if it is write protected */
if (nand_check_wp(mtd)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+ pr_debug("%s: device is write protected!\n",
__func__);
ret = -EIO;
goto out;
/**
* nand_lock - [REPLACEABLE] locks all blocks present in the device
- *
* @mtd: mtd info
* @ofs: offset to start unlock from
* @len: length to unlock
*
- * return - lock status
+ * This feature is not supported in many NAND parts. 'Micron' NAND parts do
+ * have this feature, but it allows only to lock all blocks, not for specified
+ * range for block. Implementing 'lock' feature by making use of 'unlock', for
+ * now.
*
- * This feature is not supported in many NAND parts. 'Micron' NAND parts
- * do have this feature, but it allows only to lock all blocks, not for
- * specified range for block.
- *
- * Implementing 'lock' feature by making use of 'unlock', for now.
+ * Returns lock status.
*/
int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
int chipnr, status, page;
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
__func__, (unsigned long long)ofs, len);
if (check_offs_len(mtd, ofs, len))
/* Check, if it is write protected */
if (nand_check_wp(mtd)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+ pr_debug("%s: device is write protected!\n",
__func__);
status = MTD_ERASE_FAILED;
ret = -EIO;
/* Call wait ready function */
status = chip->waitfunc(mtd, chip);
- udelay(1000);
/* See if device thinks it succeeded */
if (status & 0x01) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Error status = 0x%08x\n",
+ pr_debug("%s: error status = 0x%08x\n",
__func__, status);
ret = -EIO;
goto out;
EXPORT_SYMBOL(nand_lock);
/**
- * nand_read_page_raw - [Intern] read raw page data without ecc
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_raw - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
- * Not for syndrome calculating ecc controllers, which use a special oob layout
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
}
/**
- * nand_read_page_raw_syndrome - [Intern] read raw page data without ecc
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_raw_syndrome - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
* We need a special oob layout and handling even when OOB isn't used.
*/
}
/**
- * nand_read_page_swecc - [REPLACABLE] software ecc based page read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_swecc - [REPLACEABLE] software ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*/
static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
}
/**
- * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @data_offs: offset of requested data within the page
- * @readlen: data length
- * @bufpoi: buffer to store read data
+ * nand_read_subpage - [REPLACEABLE] software ECC based sub-page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @data_offs: offset of requested data within the page
+ * @readlen: data length
+ * @bufpoi: buffer to store read data
*/
static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
int index = 0;
- /* Column address wihin the page aligned to ECC size (256bytes). */
+ /* Column address within the page aligned to ECC size (256bytes) */
start_step = data_offs / chip->ecc.size;
end_step = (data_offs + readlen - 1) / chip->ecc.size;
num_steps = end_step - start_step + 1;
- /* Data size aligned to ECC ecc.size*/
+ /* Data size aligned to ECC ecc.size */
datafrag_len = num_steps * chip->ecc.size;
eccfrag_len = num_steps * chip->ecc.bytes;
p = bufpoi + data_col_addr;
chip->read_buf(mtd, p, datafrag_len);
- /* Calculate ECC */
+ /* Calculate ECC */
for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size)
chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]);
- /* The performance is faster if to position offsets
- according to ecc.pos. Let make sure here that
- there are no gaps in ecc positions */
+ /*
+ * The performance is faster if we position offsets according to
+ * ecc.pos. Let's make sure that there are no gaps in ECC positions.
+ */
for (i = 0; i < eccfrag_len - 1; i++) {
if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
eccpos[i + start_step * chip->ecc.bytes + 1]) {
chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
} else {
- /* send the command to read the particular ecc bytes */
- /* take care about buswidth alignment in read_buf */
+ /*
+ * Send the command to read the particular ECC bytes take care
+ * about buswidth alignment in read_buf.
+ */
index = start_step * chip->ecc.bytes;
aligned_pos = eccpos[index] & ~(busw - 1);
}
/**
- * nand_read_page_hwecc - [REPLACABLE] hardware ecc based page read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_hwecc - [REPLACEABLE] hardware ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
- * Not for syndrome calculating ecc controllers which need a special oob layout
+ * Not for syndrome calculating ECC controllers which need a special oob layout.
*/
static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
}
/**
- * nand_read_page_hwecc_oob_first - [REPLACABLE] hw ecc, read oob first
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_hwecc_oob_first - [REPLACEABLE] hw ecc, read oob first
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
- * Hardware ECC for large page chips, require OOB to be read first.
- * For this ECC mode, the write_page method is re-used from ECC_HW.
- * These methods read/write ECC from the OOB area, unlike the
- * ECC_HW_SYNDROME support with multiple ECC steps, follows the
- * "infix ECC" scheme and reads/writes ECC from the data area, by
- * overwriting the NAND manufacturer bad block markings.
+ * Hardware ECC for large page chips, require OOB to be read first. For this
+ * ECC mode, the write_page method is re-used from ECC_HW. These methods
+ * read/write ECC from the OOB area, unlike the ECC_HW_SYNDROME support with
+ * multiple ECC steps, follows the "infix ECC" scheme and reads/writes ECC from
+ * the data area, by overwriting the NAND manufacturer bad block markings.
*/
static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
struct nand_chip *chip, uint8_t *buf, int page)
}
/**
- * nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
- * The hw generator calculates the error syndrome automatically. Therefor
- * we need a special oob layout and handling.
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
*/
static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
}
/**
- * nand_transfer_oob - [Internal] Transfer oob to client buffer
- * @chip: nand chip structure
- * @oob: oob destination address
- * @ops: oob ops structure
- * @len: size of oob to transfer
+ * nand_transfer_oob - [INTERN] Transfer oob to client buffer
+ * @chip: nand chip structure
+ * @oob: oob destination address
+ * @ops: oob ops structure
+ * @len: size of oob to transfer
*/
static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
struct mtd_oob_ops *ops, size_t len)
{
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_RAW:
memcpy(oob, chip->oob_poi + ops->ooboffs, len);
return oob + len;
- case MTD_OOB_AUTO: {
+ case MTD_OPS_AUTO_OOB: {
struct nand_oobfree *free = chip->ecc.layout->oobfree;
uint32_t boffs = 0, roffs = ops->ooboffs;
size_t bytes = 0;
for (; free->length && len; free++, len -= bytes) {
- /* Read request not from offset 0 ? */
+ /* Read request not from offset 0? */
if (unlikely(roffs)) {
if (roffs >= free->length) {
roffs -= free->length;
}
/**
- * nand_do_read_ops - [Internal] Read data with ECC
- *
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob ops structure
+ * nand_do_read_ops - [INTERN] Read data with ECC
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob ops structure
*
* Internal function. Called with chip held.
*/
int ret = 0;
uint32_t readlen = ops->len;
uint32_t oobreadlen = ops->ooblen;
- uint32_t max_oobsize = ops->mode == MTD_OOB_AUTO ?
+ uint32_t max_oobsize = ops->mode == MTD_OPS_AUTO_OOB ?
mtd->oobavail : mtd->oobsize;
uint8_t *bufpoi, *oob, *buf;
bytes = min(mtd->writesize - col, readlen);
aligned = (bytes == mtd->writesize);
- /* Is the current page in the buffer ? */
+ /* Is the current page in the buffer? */
if (realpage != chip->pagebuf || oob) {
bufpoi = aligned ? buf : chip->buffers->databuf;
}
/* Now read the page into the buffer */
- if (unlikely(ops->mode == MTD_OOB_RAW))
+ if (unlikely(ops->mode == MTD_OPS_RAW))
ret = chip->ecc.read_page_raw(mtd, chip,
bufpoi, page);
else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
else
ret = chip->ecc.read_page(mtd, chip, bufpoi,
page);
- if (ret < 0)
+ if (ret < 0) {
+ if (!aligned)
+ /* Invalidate page cache */
+ chip->pagebuf = -1;
break;
+ }
/* Transfer not aligned data */
if (!aligned) {
if (!NAND_SUBPAGE_READ(chip) && !oob &&
- !(mtd->ecc_stats.failed - stats.failed))
+ !(mtd->ecc_stats.failed - stats.failed) &&
+ (ops->mode != MTD_OPS_RAW))
chip->pagebuf = realpage;
+ else
+ /* Invalidate page cache */
+ chip->pagebuf = -1;
memcpy(buf, chip->buffers->databuf + col, bytes);
}
if (!readlen)
break;
- /* For subsequent reads align to page boundary. */
+ /* For subsequent reads align to page boundary */
col = 0;
/* Increment page address */
realpage++;
chip->select_chip(mtd, chipnr);
}
- /* Check, if the chip supports auto page increment
- * or if we have hit a block boundary.
+ /*
+ * Check, if the chip supports auto page increment or if we
+ * have hit a block boundary.
*/
if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
sndcmd = 1;
/**
* nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc
- * @mtd: MTD device structure
- * @from: offset to read from
- * @len: number of bytes to read
- * @retlen: pointer to variable to store the number of read bytes
- * @buf: the databuffer to put data
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @len: number of bytes to read
+ * @retlen: pointer to variable to store the number of read bytes
+ * @buf: the databuffer to put data
*
- * Get hold of the chip and call nand_do_read
+ * Get hold of the chip and call nand_do_read.
*/
static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, uint8_t *buf)
{
struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
int ret;
/* Do not allow reads past end of device */
nand_get_device(chip, mtd, FL_READING);
- chip->ops.len = len;
- chip->ops.datbuf = buf;
- chip->ops.oobbuf = NULL;
+ ops.len = len;
+ ops.datbuf = buf;
+ ops.oobbuf = NULL;
+ ops.mode = 0;
- ret = nand_do_read_ops(mtd, from, &chip->ops);
+ ret = nand_do_read_ops(mtd, from, &ops);
- *retlen = chip->ops.retlen;
+ *retlen = ops.retlen;
nand_release_device(mtd);
}
/**
- * nand_read_oob_std - [REPLACABLE] the most common OOB data read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to read
- * @sndcmd: flag whether to issue read command or not
+ * nand_read_oob_std - [REPLACEABLE] the most common OOB data read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ * @sndcmd: flag whether to issue read command or not
*/
static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
int page, int sndcmd)
}
/**
- * nand_read_oob_syndrome - [REPLACABLE] OOB data read function for HW ECC
+ * nand_read_oob_syndrome - [REPLACEABLE] OOB data read function for HW ECC
* with syndromes
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to read
- * @sndcmd: flag whether to issue read command or not
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ * @sndcmd: flag whether to issue read command or not
*/
static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
int page, int sndcmd)
}
/**
- * nand_write_oob_std - [REPLACABLE] the most common OOB data write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to write
+ * nand_write_oob_std - [REPLACEABLE] the most common OOB data write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
*/
static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
int page)
}
/**
- * nand_write_oob_syndrome - [REPLACABLE] OOB data write function for HW ECC
- * with syndrome - only for large page flash !
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to write
+ * nand_write_oob_syndrome - [REPLACEABLE] OOB data write function for HW ECC
+ * with syndrome - only for large page flash
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
*/
static int nand_write_oob_syndrome(struct mtd_info *mtd,
struct nand_chip *chip, int page)
}
/**
- * nand_do_read_oob - [Intern] NAND read out-of-band
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob operations description structure
+ * nand_do_read_oob - [INTERN] NAND read out-of-band
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operations description structure
*
- * NAND read out-of-band data from the spare area
+ * NAND read out-of-band data from the spare area.
*/
static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
int page, realpage, chipnr, sndcmd = 1;
struct nand_chip *chip = mtd->priv;
+ struct mtd_ecc_stats stats;
int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
int readlen = ops->ooblen;
int len;
uint8_t *buf = ops->oobbuf;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08Lx, len = %i\n",
+ pr_debug("%s: from = 0x%08Lx, len = %i\n",
__func__, (unsigned long long)from, readlen);
- if (ops->mode == MTD_OOB_AUTO)
+ stats = mtd->ecc_stats;
+
+ if (ops->mode == MTD_OPS_AUTO_OOB)
len = chip->ecc.layout->oobavail;
else
len = mtd->oobsize;
if (unlikely(ops->ooboffs >= len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start read "
- "outside oob\n", __func__);
+ pr_debug("%s: attempt to start read outside oob\n",
+ __func__);
return -EINVAL;
}
if (unlikely(from >= mtd->size ||
ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
(from >> chip->page_shift)) * len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read beyond end "
- "of device\n", __func__);
+ pr_debug("%s: attempt to read beyond end of device\n",
+ __func__);
return -EINVAL;
}
page = realpage & chip->pagemask;
while (1) {
- sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
+ if (ops->mode == MTD_OPS_RAW)
+ sndcmd = chip->ecc.read_oob_raw(mtd, chip, page, sndcmd);
+ else
+ sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
len = min(len, readlen);
buf = nand_transfer_oob(chip, buf, ops, len);
chip->select_chip(mtd, chipnr);
}
- /* Check, if the chip supports auto page increment
- * or if we have hit a block boundary.
+ /*
+ * Check, if the chip supports auto page increment or if we
+ * have hit a block boundary.
*/
if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
sndcmd = 1;
}
ops->oobretlen = ops->ooblen;
- return 0;
+
+ if (mtd->ecc_stats.failed - stats.failed)
+ return -EBADMSG;
+
+ return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
}
/**
* nand_read_oob - [MTD Interface] NAND read data and/or out-of-band
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
*
- * NAND read data and/or out-of-band data
+ * NAND read data and/or out-of-band data.
*/
static int nand_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
/* Do not allow reads past end of device */
if (ops->datbuf && (from + ops->len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read "
- "beyond end of device\n", __func__);
+ pr_debug("%s: attempt to read beyond end of device\n",
+ __func__);
return -EINVAL;
}
nand_get_device(chip, mtd, FL_READING);
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
+ case MTD_OPS_RAW:
break;
default:
/**
- * nand_write_page_raw - [Intern] raw page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_raw - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*
- * Not for syndrome calculating ecc controllers, which use a special oob layout
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
}
/**
- * nand_write_page_raw_syndrome - [Intern] raw page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_raw_syndrome - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*
* We need a special oob layout and handling even when ECC isn't checked.
*/
chip->write_buf(mtd, oob, size);
}
/**
- * nand_write_page_swecc - [REPLACABLE] software ecc based page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_swecc - [REPLACEABLE] software ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*/
static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
const uint8_t *p = buf;
uint32_t *eccpos = chip->ecc.layout->eccpos;
- /* Software ecc calculation */
+ /* Software ECC calculation */
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
}
/**
- * nand_write_page_hwecc - [REPLACABLE] hardware ecc based page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_hwecc - [REPLACEABLE] hardware ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*/
static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
}
/**
- * nand_write_page_syndrome - [REPLACABLE] hardware ecc syndrom based page write
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page write
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*
- * The hw generator calculates the error syndrome automatically. Therefor
- * we need a special oob layout and handling.
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
*/
static void nand_write_page_syndrome(struct mtd_info *mtd,
struct nand_chip *chip, const uint8_t *buf)
/**
* nand_write_page - [REPLACEABLE] write one page
- * @mtd: MTD device structure
- * @chip: NAND chip descriptor
- * @buf: the data to write
- * @page: page number to write
- * @cached: cached programming
- * @raw: use _raw version of write_page
+ * @mtd: MTD device structure
+ * @chip: NAND chip descriptor
+ * @buf: the data to write
+ * @page: page number to write
+ * @cached: cached programming
+ * @raw: use _raw version of write_page
*/
static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int page, int cached, int raw)
chip->ecc.write_page(mtd, chip, buf);
/*
- * Cached progamming disabled for now, Not sure if its worth the
- * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s)
+ * Cached progamming disabled for now. Not sure if it's worth the
+ * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s).
*/
cached = 0;
status = chip->waitfunc(mtd, chip);
/*
* See if operation failed and additional status checks are
- * available
+ * available.
*/
if ((status & NAND_STATUS_FAIL) && (chip->errstat))
status = chip->errstat(mtd, chip, FL_WRITING, status,
}
/**
- * nand_fill_oob - [Internal] Transfer client buffer to oob
- * @chip: nand chip structure
- * @oob: oob data buffer
- * @len: oob data write length
- * @ops: oob ops structure
+ * nand_fill_oob - [INTERN] Transfer client buffer to oob
+ * @mtd: MTD device structure
+ * @oob: oob data buffer
+ * @len: oob data write length
+ * @ops: oob ops structure
*/
-static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
- struct mtd_oob_ops *ops)
+static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len,
+ struct mtd_oob_ops *ops)
{
+ struct nand_chip *chip = mtd->priv;
+
+ /*
+ * Initialise to all 0xFF, to avoid the possibility of left over OOB
+ * data from a previous OOB read.
+ */
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
+
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_RAW:
memcpy(chip->oob_poi + ops->ooboffs, oob, len);
return oob + len;
- case MTD_OOB_AUTO: {
+ case MTD_OPS_AUTO_OOB: {
struct nand_oobfree *free = chip->ecc.layout->oobfree;
uint32_t boffs = 0, woffs = ops->ooboffs;
size_t bytes = 0;
for (; free->length && len; free++, len -= bytes) {
- /* Write request not from offset 0 ? */
+ /* Write request not from offset 0? */
if (unlikely(woffs)) {
if (woffs >= free->length) {
woffs -= free->length;
#define NOTALIGNED(x) ((x & (chip->subpagesize - 1)) != 0)
/**
- * nand_do_write_ops - [Internal] NAND write with ECC
- * @mtd: MTD device structure
- * @to: offset to write to
- * @ops: oob operations description structure
+ * nand_do_write_ops - [INTERN] NAND write with ECC
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operations description structure
*
- * NAND write with ECC
+ * NAND write with ECC.
*/
static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
uint32_t writelen = ops->len;
uint32_t oobwritelen = ops->ooblen;
- uint32_t oobmaxlen = ops->mode == MTD_OOB_AUTO ?
+ uint32_t oobmaxlen = ops->mode == MTD_OPS_AUTO_OOB ?
mtd->oobavail : mtd->oobsize;
uint8_t *oob = ops->oobbuf;
if (!writelen)
return 0;
- /* reject writes, which are not page aligned */
+ /* Reject writes, which are not page aligned */
if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
- printk(KERN_NOTICE "%s: Attempt to write not "
- "page aligned data\n", __func__);
+ pr_notice("%s: attempt to write non page aligned data\n",
+ __func__);
return -EINVAL;
}
(chip->pagebuf << chip->page_shift) < (to + ops->len))
chip->pagebuf = -1;
- /* If we're not given explicit OOB data, let it be 0xFF */
- if (likely(!oob))
- memset(chip->oob_poi, 0xff, mtd->oobsize);
-
/* Don't allow multipage oob writes with offset */
if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen))
return -EINVAL;
int cached = writelen > bytes && page != blockmask;
uint8_t *wbuf = buf;
- /* Partial page write ? */
+ /* Partial page write? */
if (unlikely(column || writelen < (mtd->writesize - 1))) {
cached = 0;
bytes = min_t(int, bytes - column, (int) writelen);
if (unlikely(oob)) {
size_t len = min(oobwritelen, oobmaxlen);
- oob = nand_fill_oob(chip, oob, len, ops);
+ oob = nand_fill_oob(mtd, oob, len, ops);
oobwritelen -= len;
+ } else {
+ /* We still need to erase leftover OOB data */
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
}
ret = chip->write_page(mtd, chip, wbuf, page, cached,
- (ops->mode == MTD_OOB_RAW));
+ (ops->mode == MTD_OPS_RAW));
if (ret)
break;
/**
* panic_nand_write - [MTD Interface] NAND write with ECC
- * @mtd: MTD device structure
- * @to: offset to write to
- * @len: number of bytes to write
- * @retlen: pointer to variable to store the number of written bytes
- * @buf: the data to write
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
*
* NAND write with ECC. Used when performing writes in interrupt context, this
* may for example be called by mtdoops when writing an oops while in panic.
size_t *retlen, const uint8_t *buf)
{
struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
int ret;
/* Do not allow reads past end of device */
if (!len)
return 0;
- /* Wait for the device to get ready. */
+ /* Wait for the device to get ready */
panic_nand_wait(mtd, chip, 400);
- /* Grab the device. */
+ /* Grab the device */
panic_nand_get_device(chip, mtd, FL_WRITING);
- chip->ops.len = len;
- chip->ops.datbuf = (uint8_t *)buf;
- chip->ops.oobbuf = NULL;
+ ops.len = len;
+ ops.datbuf = (uint8_t *)buf;
+ ops.oobbuf = NULL;
+ ops.mode = 0;
- ret = nand_do_write_ops(mtd, to, &chip->ops);
+ ret = nand_do_write_ops(mtd, to, &ops);
- *retlen = chip->ops.retlen;
+ *retlen = ops.retlen;
return ret;
}
/**
* nand_write - [MTD Interface] NAND write with ECC
- * @mtd: MTD device structure
- * @to: offset to write to
- * @len: number of bytes to write
- * @retlen: pointer to variable to store the number of written bytes
- * @buf: the data to write
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
*
- * NAND write with ECC
+ * NAND write with ECC.
*/
static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const uint8_t *buf)
{
struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
int ret;
/* Do not allow reads past end of device */
nand_get_device(chip, mtd, FL_WRITING);
- chip->ops.len = len;
- chip->ops.datbuf = (uint8_t *)buf;
- chip->ops.oobbuf = NULL;
+ ops.len = len;
+ ops.datbuf = (uint8_t *)buf;
+ ops.oobbuf = NULL;
+ ops.mode = 0;
- ret = nand_do_write_ops(mtd, to, &chip->ops);
+ ret = nand_do_write_ops(mtd, to, &ops);
- *retlen = chip->ops.retlen;
+ *retlen = ops.retlen;
nand_release_device(mtd);
/**
* nand_do_write_oob - [MTD Interface] NAND write out-of-band
- * @mtd: MTD device structure
- * @to: offset to write to
- * @ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
*
- * NAND write out-of-band
+ * NAND write out-of-band.
*/
static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
int chipnr, page, status, len;
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
+ pr_debug("%s: to = 0x%08x, len = %i\n",
__func__, (unsigned int)to, (int)ops->ooblen);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
len = chip->ecc.layout->oobavail;
else
len = mtd->oobsize;
/* Do not allow write past end of page */
if ((ops->ooboffs + ops->ooblen) > len) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to write "
- "past end of page\n", __func__);
+ pr_debug("%s: attempt to write past end of page\n",
+ __func__);
return -EINVAL;
}
if (unlikely(ops->ooboffs >= len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start "
- "write outside oob\n", __func__);
+ pr_debug("%s: attempt to start write outside oob\n",
+ __func__);
return -EINVAL;
}
ops->ooboffs + ops->ooblen >
((mtd->size >> chip->page_shift) -
(to >> chip->page_shift)) * len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
- "end of device\n", __func__);
+ pr_debug("%s: attempt to write beyond end of device\n",
+ __func__);
return -EINVAL;
}
if (page == chip->pagebuf)
chip->pagebuf = -1;
- memset(chip->oob_poi, 0xff, mtd->oobsize);
- nand_fill_oob(chip, ops->oobbuf, ops->ooblen, ops);
- status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
- memset(chip->oob_poi, 0xff, mtd->oobsize);
+ nand_fill_oob(mtd, ops->oobbuf, ops->ooblen, ops);
+
+ if (ops->mode == MTD_OPS_RAW)
+ status = chip->ecc.write_oob_raw(mtd, chip, page & chip->pagemask);
+ else
+ status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
if (status)
return status;
/**
* nand_write_oob - [MTD Interface] NAND write data and/or out-of-band
- * @mtd: MTD device structure
- * @to: offset to write to
- * @ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
*/
static int nand_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
/* Do not allow writes past end of device */
if (ops->datbuf && (to + ops->len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
- "end of device\n", __func__);
+ pr_debug("%s: attempt to write beyond end of device\n",
+ __func__);
return -EINVAL;
}
nand_get_device(chip, mtd, FL_WRITING);
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
+ case MTD_OPS_RAW:
break;
default:
}
/**
- * single_erease_cmd - [GENERIC] NAND standard block erase command function
- * @mtd: MTD device structure
- * @page: the page address of the block which will be erased
+ * single_erase_cmd - [GENERIC] NAND standard block erase command function
+ * @mtd: MTD device structure
+ * @page: the page address of the block which will be erased
*
- * Standard erase command for NAND chips
+ * Standard erase command for NAND chips.
*/
static void single_erase_cmd(struct mtd_info *mtd, int page)
{
}
/**
- * multi_erease_cmd - [GENERIC] AND specific block erase command function
- * @mtd: MTD device structure
- * @page: the page address of the block which will be erased
+ * multi_erase_cmd - [GENERIC] AND specific block erase command function
+ * @mtd: MTD device structure
+ * @page: the page address of the block which will be erased
*
- * AND multi block erase command function
- * Erase 4 consecutive blocks
+ * AND multi block erase command function. Erase 4 consecutive blocks.
*/
static void multi_erase_cmd(struct mtd_info *mtd, int page)
{
/**
* nand_erase - [MTD Interface] erase block(s)
- * @mtd: MTD device structure
- * @instr: erase instruction
+ * @mtd: MTD device structure
+ * @instr: erase instruction
*
- * Erase one ore more blocks
+ * Erase one ore more blocks.
*/
static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
{
#define BBT_PAGE_MASK 0xffffff3f
/**
- * nand_erase_nand - [Internal] erase block(s)
- * @mtd: MTD device structure
- * @instr: erase instruction
- * @allowbbt: allow erasing the bbt area
+ * nand_erase_nand - [INTERN] erase block(s)
+ * @mtd: MTD device structure
+ * @instr: erase instruction
+ * @allowbbt: allow erasing the bbt area
*
- * Erase one ore more blocks
+ * Erase one ore more blocks.
*/
int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
int allowbbt)
unsigned int bbt_masked_page = 0xffffffff;
loff_t len;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
- __func__, (unsigned long long)instr->addr,
- (unsigned long long)instr->len);
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
+ __func__, (unsigned long long)instr->addr,
+ (unsigned long long)instr->len);
if (check_offs_len(mtd, instr->addr, instr->len))
return -EINVAL;
/* Check, if it is write protected */
if (nand_check_wp(mtd)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
- __func__);
+ pr_debug("%s: device is write protected!\n",
+ __func__);
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
* If BBT requires refresh, set the BBT page mask to see if the BBT
* should be rewritten. Otherwise the mask is set to 0xffffffff which
* can not be matched. This is also done when the bbt is actually
- * erased to avoid recusrsive updates
+ * erased to avoid recursive updates.
*/
if (chip->options & BBT_AUTO_REFRESH && !allowbbt)
bbt_masked_page = chip->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
instr->state = MTD_ERASING;
while (len) {
- /*
- * heck if we have a bad block, we do not erase bad blocks !
- */
+ /* Heck if we have a bad block, we do not erase bad blocks! */
if (nand_block_checkbad(mtd, ((loff_t) page) <<
chip->page_shift, 0, allowbbt)) {
- printk(KERN_WARNING "%s: attempt to erase a bad block "
- "at page 0x%08x\n", __func__, page);
+ pr_warn("%s: attempt to erase a bad block at page 0x%08x\n",
+ __func__, page);
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
/*
* Invalidate the page cache, if we erase the block which
- * contains the current cached page
+ * contains the current cached page.
*/
if (page <= chip->pagebuf && chip->pagebuf <
(page + pages_per_block))
/* See if block erase succeeded */
if (status & NAND_STATUS_FAIL) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Failed erase, "
- "page 0x%08x\n", __func__, page);
+ pr_debug("%s: failed erase, page 0x%08x\n",
+ __func__, page);
instr->state = MTD_ERASE_FAILED;
instr->fail_addr =
((loff_t)page << chip->page_shift);
/*
* If BBT requires refresh, set the BBT rewrite flag to the
- * page being erased
+ * page being erased.
*/
if (bbt_masked_page != 0xffffffff &&
(page & BBT_PAGE_MASK) == bbt_masked_page)
/*
* If BBT requires refresh and BBT-PERCHIP, set the BBT
- * page mask to see if this BBT should be rewritten
+ * page mask to see if this BBT should be rewritten.
*/
if (bbt_masked_page != 0xffffffff &&
(chip->bbt_td->options & NAND_BBT_PERCHIP))
/*
* If BBT requires refresh and erase was successful, rewrite any
- * selected bad block tables
+ * selected bad block tables.
*/
if (bbt_masked_page == 0xffffffff || ret)
return ret;
for (chipnr = 0; chipnr < chip->numchips; chipnr++) {
if (!rewrite_bbt[chipnr])
continue;
- /* update the BBT for chip */
- DEBUG(MTD_DEBUG_LEVEL0, "%s: nand_update_bbt "
- "(%d:0x%0llx 0x%0x)\n", __func__, chipnr,
- rewrite_bbt[chipnr], chip->bbt_td->pages[chipnr]);
+ /* Update the BBT for chip */
+ pr_debug("%s: nand_update_bbt (%d:0x%0llx 0x%0x)\n",
+ __func__, chipnr, rewrite_bbt[chipnr],
+ chip->bbt_td->pages[chipnr]);
nand_update_bbt(mtd, rewrite_bbt[chipnr]);
}
/**
* nand_sync - [MTD Interface] sync
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Sync is actually a wait for chip ready function
+ * Sync is actually a wait for chip ready function.
*/
static void nand_sync(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
+ pr_debug("%s: called\n", __func__);
/* Grab the lock and see if the device is available */
nand_get_device(chip, mtd, FL_SYNCING);
/**
* nand_block_isbad - [MTD Interface] Check if block at offset is bad
- * @mtd: MTD device structure
- * @offs: offset relative to mtd start
+ * @mtd: MTD device structure
+ * @offs: offset relative to mtd start
*/
static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
{
/**
* nand_block_markbad - [MTD Interface] Mark block at the given offset as bad
- * @mtd: MTD device structure
- * @ofs: offset relative to mtd start
+ * @mtd: MTD device structure
+ * @ofs: offset relative to mtd start
*/
static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
ret = nand_block_isbad(mtd, ofs);
if (ret) {
- /* If it was bad already, return success and do nothing. */
+ /* If it was bad already, return success and do nothing */
if (ret > 0)
return 0;
return ret;
/**
* nand_suspend - [MTD Interface] Suspend the NAND flash
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*/
static int nand_suspend(struct mtd_info *mtd)
{
/**
* nand_resume - [MTD Interface] Resume the NAND flash
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*/
static void nand_resume(struct mtd_info *mtd)
{
if (chip->state == FL_PM_SUSPENDED)
nand_release_device(mtd);
else
- printk(KERN_ERR "%s called for a chip which is not "
- "in suspended state\n", __func__);
+ pr_err("%s called for a chip which is not in suspended state\n",
+ __func__);
}
-/*
- * Set default functions
- */
+/* Set default functions */
static void nand_set_defaults(struct nand_chip *chip, int busw)
{
/* check for proper chip_delay setup, set 20us if not */
}
-/*
- * sanitize ONFI strings so we can safely print them
- */
+/* Sanitize ONFI strings so we can safely print them */
static void sanitize_string(uint8_t *s, size_t len)
{
ssize_t i;
- /* null terminate */
+ /* Null terminate */
s[len - 1] = 0;
- /* remove non printable chars */
+ /* Remove non printable chars */
for (i = 0; i < len - 1; i++) {
if (s[i] < ' ' || s[i] > 127)
s[i] = '?';
}
- /* remove trailing spaces */
+ /* Remove trailing spaces */
strim(s);
}
}
/*
- * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise
+ * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
*/
static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
- int busw)
+ int *busw)
{
struct nand_onfi_params *p = &chip->onfi_params;
int i;
int val;
- /* try ONFI for unknow chip or LP */
+ /* Try ONFI for unknown chip or LP */
chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
return 0;
- printk(KERN_INFO "ONFI flash detected\n");
+ pr_info("ONFI flash detected\n");
chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
for (i = 0; i < 3; i++) {
chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
le16_to_cpu(p->crc)) {
- printk(KERN_INFO "ONFI param page %d valid\n", i);
+ pr_info("ONFI param page %d valid\n", i);
break;
}
}
if (i == 3)
return 0;
- /* check version */
+ /* Check version */
val = le16_to_cpu(p->revision);
if (val & (1 << 5))
chip->onfi_version = 23;
chip->onfi_version = 0;
if (!chip->onfi_version) {
- printk(KERN_INFO "%s: unsupported ONFI version: %d\n",
- __func__, val);
+ pr_info("%s: unsupported ONFI version: %d\n", __func__, val);
return 0;
}
mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize;
mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
chip->chipsize = (uint64_t)le32_to_cpu(p->blocks_per_lun) * mtd->erasesize;
- busw = 0;
+ *busw = 0;
if (le16_to_cpu(p->features) & 1)
- busw = NAND_BUSWIDTH_16;
+ *busw = NAND_BUSWIDTH_16;
chip->options &= ~NAND_CHIPOPTIONS_MSK;
chip->options |= (NAND_NO_READRDY |
}
/*
- * Get the flash and manufacturer id and lookup if the type is supported
+ * Get the flash and manufacturer id and lookup if the type is supported.
*/
static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
struct nand_chip *chip,
/*
* Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
- * after power-up
+ * after power-up.
*/
chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
*maf_id = chip->read_byte(mtd);
*dev_id = chip->read_byte(mtd);
- /* Try again to make sure, as some systems the bus-hold or other
+ /*
+ * Try again to make sure, as some systems the bus-hold or other
* interface concerns can cause random data which looks like a
* possibly credible NAND flash to appear. If the two results do
* not match, ignore the device completely.
id_data[i] = chip->read_byte(mtd);
if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
- printk(KERN_INFO "%s: second ID read did not match "
- "%02x,%02x against %02x,%02x\n", __func__,
- *maf_id, *dev_id, id_data[0], id_data[1]);
+ pr_info("%s: second ID read did not match "
+ "%02x,%02x against %02x,%02x\n", __func__,
+ *maf_id, *dev_id, id_data[0], id_data[1]);
return ERR_PTR(-ENODEV);
}
chip->onfi_version = 0;
if (!type->name || !type->pagesize) {
/* Check is chip is ONFI compliant */
- ret = nand_flash_detect_onfi(mtd, chip, busw);
+ ret = nand_flash_detect_onfi(mtd, chip, &busw);
if (ret)
goto ident_done;
}
chip->chipsize = (uint64_t)type->chipsize << 20;
if (!type->pagesize && chip->init_size) {
- /* set the pagesize, oobsize, erasesize by the driver*/
+ /* Set the pagesize, oobsize, erasesize by the driver */
busw = chip->init_size(mtd, chip, id_data);
} else if (!type->pagesize) {
int extid;
}
} else {
/*
- * Old devices have chip data hardcoded in the device id table
+ * Old devices have chip data hardcoded in the device id table.
*/
mtd->erasesize = type->erasesize;
mtd->writesize = type->pagesize;
/*
* Check for Spansion/AMD ID + repeating 5th, 6th byte since
* some Spansion chips have erasesize that conflicts with size
- * listed in nand_ids table
+ * listed in nand_ids table.
* Data sheet (5 byte ID): Spansion S30ML-P ORNAND (p.39)
*/
if (*maf_id == NAND_MFR_AMD && id_data[4] != 0x00 &&
chip->options &= ~NAND_CHIPOPTIONS_MSK;
chip->options |= type->options & NAND_CHIPOPTIONS_MSK;
- /* Check if chip is a not a samsung device. Do not clear the
- * options for chips which are not having an extended id.
+ /*
+ * Check if chip is not a Samsung device. Do not clear the
+ * options for chips which do not have an extended id.
*/
if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
ident_done:
/*
- * Set chip as a default. Board drivers can override it, if necessary
+ * Set chip as a default. Board drivers can override it, if necessary.
*/
chip->options |= NAND_NO_AUTOINCR;
/*
* Check, if buswidth is correct. Hardware drivers should set
- * chip correct !
+ * chip correct!
*/
if (busw != (chip->options & NAND_BUSWIDTH_16)) {
- printk(KERN_INFO "NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
- *dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
- printk(KERN_WARNING "NAND bus width %d instead %d bit\n",
- (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
- busw ? 16 : 8);
+ pr_info("NAND device: Manufacturer ID:"
+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
+ *dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
+ pr_warn("NAND bus width %d instead %d bit\n",
+ (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
+ busw ? 16 : 8);
return ERR_PTR(-EINVAL);
}
/* Calculate the address shift from the page size */
chip->page_shift = ffs(mtd->writesize) - 1;
- /* Convert chipsize to number of pages per chip -1. */
+ /* Convert chipsize to number of pages per chip -1 */
chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
chip->bbt_erase_shift = chip->phys_erase_shift =
if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
(*maf_id == NAND_MFR_SAMSUNG ||
*maf_id == NAND_MFR_HYNIX))
- chip->options |= NAND_BBT_SCANLASTPAGE;
+ chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
(*maf_id == NAND_MFR_SAMSUNG ||
*maf_id == NAND_MFR_HYNIX ||
*maf_id == NAND_MFR_AMD)) ||
(mtd->writesize == 2048 &&
*maf_id == NAND_MFR_MICRON))
- chip->options |= NAND_BBT_SCAN2NDPAGE;
-
- /*
- * Numonyx/ST 2K pages, x8 bus use BOTH byte 1 and 6
- */
- if (!(busw & NAND_BUSWIDTH_16) &&
- *maf_id == NAND_MFR_STMICRO &&
- mtd->writesize == 2048) {
- chip->options |= NAND_BBT_SCANBYTE1AND6;
- chip->badblockpos = 0;
- }
+ chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
/* Check for AND chips with 4 page planes */
if (chip->options & NAND_4PAGE_ARRAY)
else
chip->erase_cmd = single_erase_cmd;
- /* Do not replace user supplied command function ! */
+ /* Do not replace user supplied command function! */
if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
chip->cmdfunc = nand_command_lp;
- /* TODO onfi flash name */
- printk(KERN_INFO "NAND device: Manufacturer ID:"
+ pr_info("NAND device: Manufacturer ID:"
" 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
nand_manuf_ids[maf_idx].name,
chip->onfi_version ? chip->onfi_params.model : type->name);
/**
* nand_scan_ident - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
- * @maxchips: Number of chips to scan for
- * @table: Alternative NAND ID table
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
+ * @table: alternative NAND ID table
*
- * This is the first phase of the normal nand_scan() function. It
- * reads the flash ID and sets up MTD fields accordingly.
+ * This is the first phase of the normal nand_scan() function. It reads the
+ * flash ID and sets up MTD fields accordingly.
*
* The mtd->owner field must be set to the module of the caller.
*/
if (IS_ERR(type)) {
if (!(chip->options & NAND_SCAN_SILENT_NODEV))
- printk(KERN_WARNING "No NAND device found.\n");
+ pr_warn("No NAND device found\n");
chip->select_chip(mtd, -1);
return PTR_ERR(type);
}
break;
}
if (i > 1)
- printk(KERN_INFO "%d NAND chips detected\n", i);
+ pr_info("%d NAND chips detected\n", i);
/* Store the number of chips and calc total size for mtd */
chip->numchips = i;
/**
* nand_scan_tail - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * This is the second phase of the normal nand_scan() function. It
- * fills out all the uninitialized function pointers with the defaults
- * and scans for a bad block table if appropriate.
+ * This is the second phase of the normal nand_scan() function. It fills out
+ * all the uninitialized function pointers with the defaults and scans for a
+ * bad block table if appropriate.
*/
int nand_scan_tail(struct mtd_info *mtd)
{
chip->oob_poi = chip->buffers->databuf + mtd->writesize;
/*
- * If no default placement scheme is given, select an appropriate one
+ * If no default placement scheme is given, select an appropriate one.
*/
if (!chip->ecc.layout && (chip->ecc.mode != NAND_ECC_SOFT_BCH)) {
switch (mtd->oobsize) {
chip->ecc.layout = &nand_oob_128;
break;
default:
- printk(KERN_WARNING "No oob scheme defined for "
- "oobsize %d\n", mtd->oobsize);
+ pr_warn("No oob scheme defined for oobsize %d\n",
+ mtd->oobsize);
BUG();
}
}
chip->write_page = nand_write_page;
/*
- * check ECC mode, default to software if 3byte/512byte hardware ECC is
+ * Check ECC mode, default to software if 3byte/512byte hardware ECC is
* selected and we have 256 byte pagesize fallback to software ECC
*/
/* Similar to NAND_ECC_HW, but a separate read_page handle */
if (!chip->ecc.calculate || !chip->ecc.correct ||
!chip->ecc.hwctl) {
- printk(KERN_WARNING "No ECC functions supplied; "
- "Hardware ECC not possible\n");
+ pr_warn("No ECC functions supplied; "
+ "hardware ECC not possible\n");
BUG();
}
if (!chip->ecc.read_page)
chip->ecc.read_page = nand_read_page_hwecc_oob_first;
case NAND_ECC_HW:
- /* Use standard hwecc read page function ? */
+ /* Use standard hwecc read page function? */
if (!chip->ecc.read_page)
chip->ecc.read_page = nand_read_page_hwecc;
if (!chip->ecc.write_page)
chip->ecc.read_page == nand_read_page_hwecc ||
!chip->ecc.write_page ||
chip->ecc.write_page == nand_write_page_hwecc)) {
- printk(KERN_WARNING "No ECC functions supplied; "
- "Hardware ECC not possible\n");
+ pr_warn("No ECC functions supplied; "
+ "hardware ECC not possible\n");
BUG();
}
- /* Use standard syndrome read/write page function ? */
+ /* Use standard syndrome read/write page function? */
if (!chip->ecc.read_page)
chip->ecc.read_page = nand_read_page_syndrome;
if (!chip->ecc.write_page)
if (mtd->writesize >= chip->ecc.size)
break;
- printk(KERN_WARNING "%d byte HW ECC not possible on "
- "%d byte page size, fallback to SW ECC\n",
- chip->ecc.size, mtd->writesize);
+ pr_warn("%d byte HW ECC not possible on "
+ "%d byte page size, fallback to SW ECC\n",
+ chip->ecc.size, mtd->writesize);
chip->ecc.mode = NAND_ECC_SOFT;
case NAND_ECC_SOFT:
case NAND_ECC_SOFT_BCH:
if (!mtd_nand_has_bch()) {
- printk(KERN_WARNING "CONFIG_MTD_ECC_BCH not enabled\n");
+ pr_warn("CONFIG_MTD_ECC_BCH not enabled\n");
BUG();
}
chip->ecc.calculate = nand_bch_calculate_ecc;
/*
* Board driver should supply ecc.size and ecc.bytes values to
* select how many bits are correctable; see nand_bch_init()
- * for details.
- * Otherwise, default to 4 bits for large page devices
+ * for details. Otherwise, default to 4 bits for large page
+ * devices.
*/
if (!chip->ecc.size && (mtd->oobsize >= 64)) {
chip->ecc.size = 512;
chip->ecc.bytes,
&chip->ecc.layout);
if (!chip->ecc.priv) {
- printk(KERN_WARNING "BCH ECC initialization failed!\n");
+ pr_warn("BCH ECC initialization failed!\n");
BUG();
}
break;
case NAND_ECC_NONE:
- printk(KERN_WARNING "NAND_ECC_NONE selected by board driver. "
- "This is not recommended !!\n");
+ pr_warn("NAND_ECC_NONE selected by board driver. "
+ "This is not recommended!\n");
chip->ecc.read_page = nand_read_page_raw;
chip->ecc.write_page = nand_write_page_raw;
chip->ecc.read_oob = nand_read_oob_std;
break;
default:
- printk(KERN_WARNING "Invalid NAND_ECC_MODE %d\n",
- chip->ecc.mode);
+ pr_warn("Invalid NAND_ECC_MODE %d\n", chip->ecc.mode);
BUG();
}
+ /* For many systems, the standard OOB write also works for raw */
+ if (!chip->ecc.read_oob_raw)
+ chip->ecc.read_oob_raw = chip->ecc.read_oob;
+ if (!chip->ecc.write_oob_raw)
+ chip->ecc.write_oob_raw = chip->ecc.write_oob;
+
/*
* The number of bytes available for a client to place data into
- * the out of band area
+ * the out of band area.
*/
chip->ecc.layout->oobavail = 0;
for (i = 0; chip->ecc.layout->oobfree[i].length
/*
* Set the number of read / write steps for one page depending on ECC
- * mode
+ * mode.
*/
chip->ecc.steps = mtd->writesize / chip->ecc.size;
if (chip->ecc.steps * chip->ecc.size != mtd->writesize) {
- printk(KERN_WARNING "Invalid ecc parameters\n");
+ pr_warn("Invalid ECC parameters\n");
BUG();
}
chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
- /*
- * Allow subpage writes up to ecc.steps. Not possible for MLC
- * FLASH.
- */
+ /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
if (!(chip->options & NAND_NO_SUBPAGE_WRITE) &&
!(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
switch (chip->ecc.steps) {
}
EXPORT_SYMBOL(nand_scan_tail);
-/* is_module_text_address() isn't exported, and it's mostly a pointless
+/*
+ * is_module_text_address() isn't exported, and it's mostly a pointless
* test if this is a module _anyway_ -- they'd have to try _really_ hard
- * to call us from in-kernel code if the core NAND support is modular. */
+ * to call us from in-kernel code if the core NAND support is modular.
+ */
#ifdef MODULE
#define caller_is_module() (1)
#else
/**
* nand_scan - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
- * @maxchips: Number of chips to scan for
- *
- * This fills out all the uninitialized function pointers
- * with the defaults.
- * The flash ID is read and the mtd/chip structures are
- * filled with the appropriate values.
- * The mtd->owner field must be set to the module of the caller
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
*
+ * This fills out all the uninitialized function pointers with the defaults.
+ * The flash ID is read and the mtd/chip structures are filled with the
+ * appropriate values. The mtd->owner field must be set to the module of the
+ * caller.
*/
int nand_scan(struct mtd_info *mtd, int maxchips)
{
/* Many callers got this wrong, so check for it for a while... */
if (!mtd->owner && caller_is_module()) {
- printk(KERN_CRIT "%s called with NULL mtd->owner!\n",
- __func__);
+ pr_crit("%s called with NULL mtd->owner!\n", __func__);
BUG();
}
/**
* nand_release - [NAND Interface] Free resources held by the NAND device
- * @mtd: MTD device structure
-*/
+ * @mtd: MTD device structure
+ */
void nand_release(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
*
* When nand_scan_bbt is called, then it tries to find the bad block table
* depending on the options in the BBT descriptor(s). If no flash based BBT
- * (NAND_USE_FLASH_BBT) is specified then the device is scanned for factory
+ * (NAND_BBT_USE_FLASH) is specified then the device is scanned for factory
* marked good / bad blocks. This information is used to create a memory BBT.
* Once a new bad block is discovered then the "factory" information is updated
* on the device.
* The table is marked in the OOB area with an ident pattern and a version
* number which indicates which of both tables is more up to date. If the NAND
* controller needs the complete OOB area for the ECC information then the
- * option NAND_USE_FLASH_BBT_NO_OOB should be used: it moves the ident pattern
- * and the version byte into the data area and the OOB area will remain
- * untouched.
+ * option NAND_BBT_NO_OOB should be used (along with NAND_BBT_USE_FLASH, of
+ * course): it moves the ident pattern and the version byte into the data area
+ * and the OOB area will remain untouched.
*
* The table uses 2 bits per block
* 11b: block is good
/**
* check_pattern - [GENERIC] check if a pattern is in the buffer
- * @buf: the buffer to search
- * @len: the length of buffer to search
- * @paglen: the pagelength
- * @td: search pattern descriptor
+ * @buf: the buffer to search
+ * @len: the length of buffer to search
+ * @paglen: the pagelength
+ * @td: search pattern descriptor
*
- * Check for a pattern at the given place. Used to search bad block
- * tables and good / bad block identifiers.
- * If the SCAN_EMPTY option is set then check, if all bytes except the
- * pattern area contain 0xff
- *
-*/
+ * Check for a pattern at the given place. Used to search bad block tables and
+ * good / bad block identifiers. If the SCAN_EMPTY option is set then check, if
+ * all bytes except the pattern area contain 0xff.
+ */
static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
{
int i, end = 0;
p += end;
/* Compare the pattern */
- for (i = 0; i < td->len; i++) {
- if (p[i] != td->pattern[i])
- return -1;
- }
-
- /* Check both positions 1 and 6 for pattern? */
- if (td->options & NAND_BBT_SCANBYTE1AND6) {
- if (td->options & NAND_BBT_SCANEMPTY) {
- p += td->len;
- end += NAND_SMALL_BADBLOCK_POS - td->offs;
- /* Check region between positions 1 and 6 */
- for (i = 0; i < NAND_SMALL_BADBLOCK_POS - td->offs - td->len;
- i++) {
- if (*p++ != 0xff)
- return -1;
- }
- }
- else {
- p += NAND_SMALL_BADBLOCK_POS - td->offs;
- }
- /* Compare the pattern */
- for (i = 0; i < td->len; i++) {
- if (p[i] != td->pattern[i])
- return -1;
- }
- }
+ if (memcmp(p, td->pattern, td->len))
+ return -1;
if (td->options & NAND_BBT_SCANEMPTY) {
p += td->len;
/**
* check_short_pattern - [GENERIC] check if a pattern is in the buffer
- * @buf: the buffer to search
- * @td: search pattern descriptor
- *
- * Check for a pattern at the given place. Used to search bad block
- * tables and good / bad block identifiers. Same as check_pattern, but
- * no optional empty check
+ * @buf: the buffer to search
+ * @td: search pattern descriptor
*
-*/
+ * Check for a pattern at the given place. Used to search bad block tables and
+ * good / bad block identifiers. Same as check_pattern, but no optional empty
+ * check.
+ */
static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
{
int i;
if (p[td->offs + i] != td->pattern[i])
return -1;
}
- /* Need to check location 1 AND 6? */
- if (td->options & NAND_BBT_SCANBYTE1AND6) {
- for (i = 0; i < td->len; i++) {
- if (p[NAND_SMALL_BADBLOCK_POS + i] != td->pattern[i])
- return -1;
- }
- }
return 0;
}
/**
* add_marker_len - compute the length of the marker in data area
- * @td: BBT descriptor used for computation
+ * @td: BBT descriptor used for computation
*
- * The length will be 0 if the markeris located in OOB area.
+ * The length will be 0 if the marker is located in OOB area.
*/
static u32 add_marker_len(struct nand_bbt_descr *td)
{
/**
* read_bbt - [GENERIC] Read the bad block table starting from page
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @page: the starting page
- * @num: the number of bbt descriptors to read
- * @td: the bbt describtion table
- * @offs: offset in the memory table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @page: the starting page
+ * @num: the number of bbt descriptors to read
+ * @td: the bbt describtion table
+ * @offs: offset in the memory table
*
* Read the bad block table starting from page.
- *
*/
static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
struct nand_bbt_descr *td, int offs)
{
- int res, i, j, act = 0;
+ int res, ret = 0, i, j, act = 0;
struct nand_chip *this = mtd->priv;
size_t retlen, len, totlen;
loff_t from;
int bits = td->options & NAND_BBT_NRBITS_MSK;
- uint8_t msk = (uint8_t) ((1 << bits) - 1);
+ uint8_t msk = (uint8_t)((1 << bits) - 1);
u32 marker_len;
int reserved_block_code = td->reserved_block_code;
totlen = (num * bits) >> 3;
marker_len = add_marker_len(td);
- from = ((loff_t) page) << this->page_shift;
+ from = ((loff_t)page) << this->page_shift;
while (totlen) {
- len = min(totlen, (size_t) (1 << this->bbt_erase_shift));
+ len = min(totlen, (size_t)(1 << this->bbt_erase_shift));
if (marker_len) {
/*
* In case the BBT marker is not in the OOB area it
}
res = mtd->read(mtd, from, len, &retlen, buf);
if (res < 0) {
- if (retlen != len) {
- printk(KERN_INFO "nand_bbt: Error reading bad block table\n");
+ if (mtd_is_eccerr(res)) {
+ pr_info("nand_bbt: ECC error in BBT at "
+ "0x%012llx\n", from & ~mtd->writesize);
+ return res;
+ } else if (mtd_is_bitflip(res)) {
+ pr_info("nand_bbt: corrected error in BBT at "
+ "0x%012llx\n", from & ~mtd->writesize);
+ ret = res;
+ } else {
+ pr_info("nand_bbt: error reading BBT\n");
return res;
}
- printk(KERN_WARNING "nand_bbt: ECC error while reading bad block table\n");
}
/* Analyse data */
if (tmp == msk)
continue;
if (reserved_block_code && (tmp == reserved_block_code)) {
- printk(KERN_DEBUG "nand_read_bbt: Reserved block at 0x%012llx\n",
- (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+ pr_info("nand_read_bbt: reserved block at 0x%012llx\n",
+ (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
mtd->ecc_stats.bbtblocks++;
continue;
}
- /* Leave it for now, if its matured we can move this
- * message to MTD_DEBUG_LEVEL0 */
- printk(KERN_DEBUG "nand_read_bbt: Bad block at 0x%012llx\n",
- (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
- /* Factory marked bad or worn out ? */
+ /*
+ * Leave it for now, if it's matured we can
+ * move this message to pr_debug.
+ */
+ pr_info("nand_read_bbt: bad block at 0x%012llx\n",
+ (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+ /* Factory marked bad or worn out? */
if (tmp == 0)
this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
else
totlen -= len;
from += len;
}
- return 0;
+ return ret;
}
/**
* read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @chip: read the table for a specific chip, -1 read all chips.
- * Applies only if NAND_BBT_PERCHIP option is set
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @chip: read the table for a specific chip, -1 read all chips; applies only if
+ * NAND_BBT_PERCHIP option is set
*
- * Read the bad block table for all chips starting at a given page
- * We assume that the bbt bits are in consecutive order.
-*/
+ * Read the bad block table for all chips starting at a given page. We assume
+ * that the bbt bits are in consecutive order.
+ */
static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
{
struct nand_chip *this = mtd->priv;
return 0;
}
-/*
- * BBT marker is in the first page, no OOB.
- */
+/* BBT marker is in the first page, no OOB */
static int scan_read_raw_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
struct nand_bbt_descr *td)
{
return mtd->read(mtd, offs, len, &retlen, buf);
}
-/*
- * Scan read raw data from flash
- */
+/* Scan read raw data from flash */
static int scan_read_raw_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
size_t len)
{
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_RAW;
+ ops.mode = MTD_OPS_RAW;
ops.ooboffs = 0;
ops.ooblen = mtd->oobsize;
-
while (len > 0) {
- if (len <= mtd->writesize) {
- ops.oobbuf = buf + len;
- ops.datbuf = buf;
- ops.len = len;
- return mtd->read_oob(mtd, offs, &ops);
- } else {
- ops.oobbuf = buf + mtd->writesize;
- ops.datbuf = buf;
- ops.len = mtd->writesize;
- res = mtd->read_oob(mtd, offs, &ops);
+ ops.datbuf = buf;
+ ops.len = min(len, (size_t)mtd->writesize);
+ ops.oobbuf = buf + ops.len;
- if (res)
- return res;
- }
+ res = mtd->read_oob(mtd, offs, &ops);
+
+ if (res)
+ return res;
buf += mtd->oobsize + mtd->writesize;
len -= mtd->writesize;
return scan_read_raw_oob(mtd, buf, offs, len);
}
-/*
- * Scan write data with oob to flash
- */
+/* Scan write data with oob to flash */
static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len,
uint8_t *buf, uint8_t *oob)
{
struct mtd_oob_ops ops;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = 0;
ops.ooblen = mtd->oobsize;
ops.datbuf = buf;
/**
* read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @md: descriptor for the bad block table mirror
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
*
- * Read the bad block table(s) for all chips starting at a given page
- * We assume that the bbt bits are in consecutive order.
- *
-*/
+ * Read the bad block table(s) for all chips starting at a given page. We
+ * assume that the bbt bits are in consecutive order.
+ */
static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
struct nand_bbt_descr *td, struct nand_bbt_descr *md)
{
scan_read_raw(mtd, buf, (loff_t)td->pages[0] << this->page_shift,
mtd->writesize, td);
td->version[0] = buf[bbt_get_ver_offs(mtd, td)];
- printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
- td->pages[0], td->version[0]);
+ pr_info("Bad block table at page %d, version 0x%02X\n",
+ td->pages[0], td->version[0]);
}
/* Read the mirror version, if available */
scan_read_raw(mtd, buf, (loff_t)md->pages[0] << this->page_shift,
mtd->writesize, td);
md->version[0] = buf[bbt_get_ver_offs(mtd, md)];
- printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
- md->pages[0], md->version[0]);
+ pr_info("Bad block table at page %d, version 0x%02X\n",
+ md->pages[0], md->version[0]);
}
return 1;
}
-/*
- * Scan a given block full
- */
+/* Scan a given block full */
static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
loff_t offs, uint8_t *buf, size_t readlen,
int scanlen, int len)
int ret, j;
ret = scan_read_raw_oob(mtd, buf, offs, readlen);
- if (ret)
+ /* Ignore ECC errors when checking for BBM */
+ if (ret && !mtd_is_bitflip_or_eccerr(ret))
return ret;
for (j = 0; j < len; j++, buf += scanlen) {
return 0;
}
-/*
- * Scan a given block partially
- */
+/* Scan a given block partially */
static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
loff_t offs, uint8_t *buf, int len)
{
ops.oobbuf = buf;
ops.ooboffs = 0;
ops.datbuf = NULL;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
for (j = 0; j < len; j++) {
/*
- * Read the full oob until read_oob is fixed to
- * handle single byte reads for 16 bit
- * buswidth
+ * Read the full oob until read_oob is fixed to handle single
+ * byte reads for 16 bit buswidth.
*/
ret = mtd->read_oob(mtd, offs, &ops);
- if (ret)
+ /* Ignore ECC errors when checking for BBM */
+ if (ret && !mtd_is_bitflip_or_eccerr(ret))
return ret;
if (check_short_pattern(buf, bd))
/**
* create_bbt - [GENERIC] Create a bad block table by scanning the device
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @bd: descriptor for the good/bad block search pattern
- * @chip: create the table for a specific chip, -1 read all chips.
- * Applies only if NAND_BBT_PERCHIP option is set
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @bd: descriptor for the good/bad block search pattern
+ * @chip: create the table for a specific chip, -1 read all chips; applies only
+ * if NAND_BBT_PERCHIP option is set
*
- * Create a bad block table by scanning the device
- * for the given good/bad block identify pattern
+ * Create a bad block table by scanning the device for the given good/bad block
+ * identify pattern.
*/
static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
struct nand_bbt_descr *bd, int chip)
loff_t from;
size_t readlen;
- printk(KERN_INFO "Scanning device for bad blocks\n");
+ pr_info("Scanning device for bad blocks\n");
if (bd->options & NAND_BBT_SCANALLPAGES)
len = 1 << (this->bbt_erase_shift - this->page_shift);
}
if (chip == -1) {
- /* Note that numblocks is 2 * (real numblocks) here, see i+=2
- * below as it makes shifting and masking less painful */
+ /*
+ * Note that numblocks is 2 * (real numblocks) here, see i+=2
+ * below as it makes shifting and masking less painful
+ */
numblocks = mtd->size >> (this->bbt_erase_shift - 1);
startblock = 0;
from = 0;
} else {
if (chip >= this->numchips) {
- printk(KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
+ pr_warn("create_bbt(): chipnr (%d) > available chips (%d)\n",
chip + 1, this->numchips);
return -EINVAL;
}
from = (loff_t)startblock << (this->bbt_erase_shift - 1);
}
- if (this->options & NAND_BBT_SCANLASTPAGE)
+ if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
from += mtd->erasesize - (mtd->writesize * len);
for (i = startblock; i < numblocks;) {
if (ret) {
this->bbt[i >> 3] |= 0x03 << (i & 0x6);
- printk(KERN_WARNING "Bad eraseblock %d at 0x%012llx\n",
- i >> 1, (unsigned long long)from);
+ pr_warn("Bad eraseblock %d at 0x%012llx\n",
+ i >> 1, (unsigned long long)from);
mtd->ecc_stats.badblocks++;
}
/**
* search_bbt - [GENERIC] scan the device for a specific bad block table
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
*
- * Read the bad block table by searching for a given ident pattern.
- * Search is preformed either from the beginning up or from the end of
- * the device downwards. The search starts always at the start of a
- * block.
- * If the option NAND_BBT_PERCHIP is given, each chip is searched
- * for a bbt, which contains the bad block information of this chip.
- * This is necessary to provide support for certain DOC devices.
+ * Read the bad block table by searching for a given ident pattern. Search is
+ * preformed either from the beginning up or from the end of the device
+ * downwards. The search starts always at the start of a block. If the option
+ * NAND_BBT_PERCHIP is given, each chip is searched for a bbt, which contains
+ * the bad block information of this chip. This is necessary to provide support
+ * for certain DOC devices.
*
- * The bbt ident pattern resides in the oob area of the first page
- * in a block.
+ * The bbt ident pattern resides in the oob area of the first page in a block.
*/
static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
{
int bbtblocks;
int blocktopage = this->bbt_erase_shift - this->page_shift;
- /* Search direction top -> down ? */
+ /* Search direction top -> down? */
if (td->options & NAND_BBT_LASTBLOCK) {
startblock = (mtd->size >> this->bbt_erase_shift) - 1;
dir = -1;
dir = 1;
}
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP) {
chips = this->numchips;
bbtblocks = this->chipsize >> this->bbt_erase_shift;
/* Check, if we found a bbt for each requested chip */
for (i = 0; i < chips; i++) {
if (td->pages[i] == -1)
- printk(KERN_WARNING "Bad block table not found for chip %d\n", i);
+ pr_warn("Bad block table not found for chip %d\n", i);
else
- printk(KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i],
- td->version[i]);
+ pr_info("Bad block table found at page %d, version "
+ "0x%02X\n", td->pages[i], td->version[i]);
}
return 0;
}
/**
* search_read_bbts - [GENERIC] scan the device for bad block table(s)
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @md: descriptor for the bad block table mirror
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
*
- * Search and read the bad block table(s)
-*/
+ * Search and read the bad block table(s).
+ */
static int search_read_bbts(struct mtd_info *mtd, uint8_t * buf, struct nand_bbt_descr *td, struct nand_bbt_descr *md)
{
/* Search the primary table */
/**
* write_bbt - [GENERIC] (Re)write the bad block table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
+ * @chipsel: selector for a specific chip, -1 for all
*
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @md: descriptor for the bad block table mirror
- * @chipsel: selector for a specific chip, -1 for all
- *
- * (Re)write the bad block table
- *
-*/
+ * (Re)write the bad block table.
+ */
static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
struct nand_bbt_descr *td, struct nand_bbt_descr *md,
int chipsel)
ops.ooblen = mtd->oobsize;
ops.ooboffs = 0;
ops.datbuf = NULL;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
if (!rcode)
rcode = 0xff;
- /* Write bad block table per chip rather than per device ? */
+ /* Write bad block table per chip rather than per device? */
if (td->options & NAND_BBT_PERCHIP) {
numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
- /* Full device write or specific chip ? */
+ /* Full device write or specific chip? */
if (chipsel == -1) {
nrchips = this->numchips;
} else {
/* Loop through the chips */
for (; chip < nrchips; chip++) {
-
- /* There was already a version of the table, reuse the page
+ /*
+ * There was already a version of the table, reuse the page
* This applies for absolute placement too, as we have the
* page nr. in td->pages.
*/
goto write;
}
- /* Automatic placement of the bad block table */
- /* Search direction top -> down ? */
+ /*
+ * Automatic placement of the bad block table. Search direction
+ * top -> down?
+ */
if (td->options & NAND_BBT_LASTBLOCK) {
startblock = numblocks * (chip + 1) - 1;
dir = -1;
if (!md || md->pages[chip] != page)
goto write;
}
- printk(KERN_ERR "No space left to write bad block table\n");
+ pr_err("No space left to write bad block table\n");
return -ENOSPC;
write:
bbtoffs = chip * (numblocks >> 2);
- to = ((loff_t) page) << this->page_shift;
+ to = ((loff_t)page) << this->page_shift;
- /* Must we save the block contents ? */
+ /* Must we save the block contents? */
if (td->options & NAND_BBT_SAVECONTENT) {
/* Make it block aligned */
- to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1));
+ to &= ~((loff_t)((1 << this->bbt_erase_shift) - 1));
len = 1 << this->bbt_erase_shift;
res = mtd->read(mtd, to, len, &retlen, buf);
if (res < 0) {
if (retlen != len) {
- printk(KERN_INFO "nand_bbt: Error "
- "reading block for writing "
- "the bad block table\n");
+ pr_info("nand_bbt: error reading block "
+ "for writing the bad block table\n");
return res;
}
- printk(KERN_WARNING "nand_bbt: ECC error "
- "while reading block for writing "
- "bad block table\n");
+ pr_warn("nand_bbt: ECC error while reading "
+ "block for writing bad block table\n");
}
/* Read oob data */
ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
pageoffs = page - (int)(to >> this->page_shift);
offs = pageoffs << this->page_shift;
/* Preset the bbt area with 0xff */
- memset(&buf[offs], 0xff, (size_t) (numblocks >> sft));
+ memset(&buf[offs], 0xff, (size_t)(numblocks >> sft));
ooboffs = len + (pageoffs * mtd->oobsize);
} else if (td->options & NAND_BBT_NO_OOB) {
ooboffs = 0;
offs = td->len;
- /* the version byte */
+ /* The version byte */
if (td->options & NAND_BBT_VERSION)
offs++;
/* Calc length */
- len = (size_t) (numblocks >> sft);
+ len = (size_t)(numblocks >> sft);
len += offs;
- /* Make it page aligned ! */
+ /* Make it page aligned! */
len = ALIGN(len, mtd->writesize);
/* Preset the buffer with 0xff */
memset(buf, 0xff, len);
memcpy(buf, td->pattern, td->len);
} else {
/* Calc length */
- len = (size_t) (numblocks >> sft);
- /* Make it page aligned ! */
+ len = (size_t)(numblocks >> sft);
+ /* Make it page aligned! */
len = ALIGN(len, mtd->writesize);
/* Preset the buffer with 0xff */
memset(buf, 0xff, len +
if (td->options & NAND_BBT_VERSION)
buf[ooboffs + td->veroffs] = td->version[chip];
- /* walk through the memory table */
+ /* Walk through the memory table */
for (i = 0; i < numblocks;) {
uint8_t dat;
dat = this->bbt[bbtoffs + (i >> 2)];
for (j = 0; j < 4; j++, i++) {
int sftcnt = (i << (3 - sft)) & sftmsk;
- /* Do not store the reserved bbt blocks ! */
+ /* Do not store the reserved bbt blocks! */
buf[offs + (i >> sft)] &=
~(msk[dat & 0x03] << sftcnt);
dat >>= 2;
if (res < 0)
goto outerr;
- printk(KERN_DEBUG "Bad block table written to 0x%012llx, version "
- "0x%02X\n", (unsigned long long)to, td->version[chip]);
+ pr_info("Bad block table written to 0x%012llx, version 0x%02X\n",
+ (unsigned long long)to, td->version[chip]);
/* Mark it as used */
td->pages[chip] = page;
return 0;
outerr:
- printk(KERN_WARNING
- "nand_bbt: Error while writing bad block table %d\n", res);
+ pr_warn("nand_bbt: error while writing bad block table %d\n", res);
return res;
}
/**
* nand_memory_bbt - [GENERIC] create a memory based bad block table
- * @mtd: MTD device structure
- * @bd: descriptor for the good/bad block search pattern
+ * @mtd: MTD device structure
+ * @bd: descriptor for the good/bad block search pattern
*
- * The function creates a memory based bbt by scanning the device
- * for manufacturer / software marked good / bad blocks
-*/
+ * The function creates a memory based bbt by scanning the device for
+ * manufacturer / software marked good / bad blocks.
+ */
static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
{
struct nand_chip *this = mtd->priv;
/**
* check_create - [GENERIC] create and write bbt(s) if necessary
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @bd: descriptor for the good/bad block search pattern
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @bd: descriptor for the good/bad block search pattern
*
- * The function checks the results of the previous call to read_bbt
- * and creates / updates the bbt(s) if necessary
- * Creation is necessary if no bbt was found for the chip/device
- * Update is necessary if one of the tables is missing or the
- * version nr. of one table is less than the other
-*/
+ * The function checks the results of the previous call to read_bbt and creates
+ * / updates the bbt(s) if necessary. Creation is necessary if no bbt was found
+ * for the chip/device. Update is necessary if one of the tables is missing or
+ * the version nr. of one table is less than the other.
+ */
static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
{
- int i, chips, writeops, chipsel, res;
+ int i, chips, writeops, create, chipsel, res, res2;
struct nand_chip *this = mtd->priv;
struct nand_bbt_descr *td = this->bbt_td;
struct nand_bbt_descr *md = this->bbt_md;
struct nand_bbt_descr *rd, *rd2;
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP)
chips = this->numchips;
else
for (i = 0; i < chips; i++) {
writeops = 0;
+ create = 0;
rd = NULL;
rd2 = NULL;
- /* Per chip or per device ? */
+ res = res2 = 0;
+ /* Per chip or per device? */
chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
- /* Mirrored table available ? */
+ /* Mirrored table available? */
if (md) {
if (td->pages[i] == -1 && md->pages[i] == -1) {
+ create = 1;
writeops = 0x03;
- goto create;
- }
-
- if (td->pages[i] == -1) {
+ } else if (td->pages[i] == -1) {
rd = md;
- td->version[i] = md->version[i];
- writeops = 1;
- goto writecheck;
- }
-
- if (md->pages[i] == -1) {
+ writeops = 0x01;
+ } else if (md->pages[i] == -1) {
rd = td;
- md->version[i] = td->version[i];
- writeops = 2;
- goto writecheck;
- }
-
- if (td->version[i] == md->version[i]) {
+ writeops = 0x02;
+ } else if (td->version[i] == md->version[i]) {
rd = td;
if (!(td->options & NAND_BBT_VERSION))
rd2 = md;
- goto writecheck;
- }
-
- if (((int8_t) (td->version[i] - md->version[i])) > 0) {
+ } else if (((int8_t)(td->version[i] - md->version[i])) > 0) {
rd = td;
- md->version[i] = td->version[i];
- writeops = 2;
+ writeops = 0x02;
} else {
rd = md;
- td->version[i] = md->version[i];
- writeops = 1;
+ writeops = 0x01;
}
-
- goto writecheck;
-
} else {
if (td->pages[i] == -1) {
+ create = 1;
writeops = 0x01;
- goto create;
+ } else {
+ rd = td;
}
- rd = td;
- goto writecheck;
}
- create:
- /* Create the bad block table by scanning the device ? */
- if (!(td->options & NAND_BBT_CREATE))
- continue;
- /* Create the table in memory by scanning the chip(s) */
- if (!(this->options & NAND_CREATE_EMPTY_BBT))
- create_bbt(mtd, buf, bd, chipsel);
-
- td->version[i] = 1;
- if (md)
- md->version[i] = 1;
- writecheck:
- /* read back first ? */
- if (rd)
- read_abs_bbt(mtd, buf, rd, chipsel);
- /* If they weren't versioned, read both. */
- if (rd2)
- read_abs_bbt(mtd, buf, rd2, chipsel);
-
- /* Write the bad block table to the device ? */
+ if (create) {
+ /* Create the bad block table by scanning the device? */
+ if (!(td->options & NAND_BBT_CREATE))
+ continue;
+
+ /* Create the table in memory by scanning the chip(s) */
+ if (!(this->bbt_options & NAND_BBT_CREATE_EMPTY))
+ create_bbt(mtd, buf, bd, chipsel);
+
+ td->version[i] = 1;
+ if (md)
+ md->version[i] = 1;
+ }
+
+ /* Read back first? */
+ if (rd) {
+ res = read_abs_bbt(mtd, buf, rd, chipsel);
+ if (mtd_is_eccerr(res)) {
+ /* Mark table as invalid */
+ rd->pages[i] = -1;
+ rd->version[i] = 0;
+ i--;
+ continue;
+ }
+ }
+ /* If they weren't versioned, read both */
+ if (rd2) {
+ res2 = read_abs_bbt(mtd, buf, rd2, chipsel);
+ if (mtd_is_eccerr(res2)) {
+ /* Mark table as invalid */
+ rd2->pages[i] = -1;
+ rd2->version[i] = 0;
+ i--;
+ continue;
+ }
+ }
+
+ /* Scrub the flash table(s)? */
+ if (mtd_is_bitflip(res) || mtd_is_bitflip(res2))
+ writeops = 0x03;
+
+ /* Update version numbers before writing */
+ if (md) {
+ td->version[i] = max(td->version[i], md->version[i]);
+ md->version[i] = td->version[i];
+ }
+
+ /* Write the bad block table to the device? */
if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
res = write_bbt(mtd, buf, td, md, chipsel);
if (res < 0)
return res;
}
- /* Write the mirror bad block table to the device ? */
+ /* Write the mirror bad block table to the device? */
if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
res = write_bbt(mtd, buf, md, td, chipsel);
if (res < 0)
/**
* mark_bbt_regions - [GENERIC] mark the bad block table regions
- * @mtd: MTD device structure
- * @td: bad block table descriptor
+ * @mtd: MTD device structure
+ * @td: bad block table descriptor
*
- * The bad block table regions are marked as "bad" to prevent
- * accidental erasures / writes. The regions are identified by
- * the mark 0x02.
-*/
+ * The bad block table regions are marked as "bad" to prevent accidental
+ * erasures / writes. The regions are identified by the mark 0x02.
+ */
static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
{
struct nand_chip *this = mtd->priv;
int i, j, chips, block, nrblocks, update;
uint8_t oldval, newval;
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP) {
chips = this->numchips;
nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
update = 1;
block += 2;
}
- /* If we want reserved blocks to be recorded to flash, and some
- new ones have been marked, then we need to update the stored
- bbts. This should only happen once. */
+ /*
+ * If we want reserved blocks to be recorded to flash, and some
+ * new ones have been marked, then we need to update the stored
+ * bbts. This should only happen once.
+ */
if (update && td->reserved_block_code)
nand_update_bbt(mtd, (loff_t)(block - 2) << (this->bbt_erase_shift - 1));
}
/**
* verify_bbt_descr - verify the bad block description
- * @mtd: MTD device structure
- * @bd: the table to verify
+ * @mtd: MTD device structure
+ * @bd: the table to verify
*
* This functions performs a few sanity checks on the bad block description
* table.
pattern_len = bd->len;
bits = bd->options & NAND_BBT_NRBITS_MSK;
- BUG_ON((this->options & NAND_USE_FLASH_BBT_NO_OOB) &&
- !(this->options & NAND_USE_FLASH_BBT));
+ BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) &&
+ !(this->bbt_options & NAND_BBT_USE_FLASH));
BUG_ON(!bits);
if (bd->options & NAND_BBT_VERSION)
pattern_len++;
if (bd->options & NAND_BBT_NO_OOB) {
- BUG_ON(!(this->options & NAND_USE_FLASH_BBT));
- BUG_ON(!(this->options & NAND_USE_FLASH_BBT_NO_OOB));
+ BUG_ON(!(this->bbt_options & NAND_BBT_USE_FLASH));
+ BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB));
BUG_ON(bd->offs);
if (bd->options & NAND_BBT_VERSION)
BUG_ON(bd->veroffs != bd->len);
/**
* nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
- * @mtd: MTD device structure
- * @bd: descriptor for the good/bad block search pattern
- *
- * The function checks, if a bad block table(s) is/are already
- * available. If not it scans the device for manufacturer
- * marked good / bad blocks and writes the bad block table(s) to
- * the selected place.
+ * @mtd: MTD device structure
+ * @bd: descriptor for the good/bad block search pattern
*
- * The bad block table memory is allocated here. It must be freed
- * by calling the nand_free_bbt function.
+ * The function checks, if a bad block table(s) is/are already available. If
+ * not it scans the device for manufacturer marked good / bad blocks and writes
+ * the bad block table(s) to the selected place.
*
-*/
+ * The bad block table memory is allocated here. It must be freed by calling
+ * the nand_free_bbt function.
+ */
int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
{
struct nand_chip *this = mtd->priv;
struct nand_bbt_descr *md = this->bbt_md;
len = mtd->size >> (this->bbt_erase_shift + 2);
- /* Allocate memory (2bit per block) and clear the memory bad block table */
+ /*
+ * Allocate memory (2bit per block) and clear the memory bad block
+ * table.
+ */
this->bbt = kzalloc(len, GFP_KERNEL);
- if (!this->bbt) {
- printk(KERN_ERR "nand_scan_bbt: Out of memory\n");
+ if (!this->bbt)
return -ENOMEM;
- }
- /* If no primary table decriptor is given, scan the device
- * to build a memory based bad block table
+ /*
+ * If no primary table decriptor is given, scan the device to build a
+ * memory based bad block table.
*/
if (!td) {
if ((res = nand_memory_bbt(mtd, bd))) {
- printk(KERN_ERR "nand_bbt: Can't scan flash and build the RAM-based BBT\n");
+ pr_err("nand_bbt: can't scan flash and build the RAM-based BBT\n");
kfree(this->bbt);
this->bbt = NULL;
}
len += (len >> this->page_shift) * mtd->oobsize;
buf = vmalloc(len);
if (!buf) {
- printk(KERN_ERR "nand_bbt: Out of memory\n");
kfree(this->bbt);
this->bbt = NULL;
return -ENOMEM;
}
- /* Is the bbt at a given page ? */
+ /* Is the bbt at a given page? */
if (td->options & NAND_BBT_ABSPAGE) {
res = read_abs_bbts(mtd, buf, td, md);
} else {
/**
* nand_update_bbt - [NAND Interface] update bad block table(s)
- * @mtd: MTD device structure
- * @offs: the offset of the newly marked block
+ * @mtd: MTD device structure
+ * @offs: the offset of the newly marked block
*
- * The function updates the bad block table(s)
-*/
+ * The function updates the bad block table(s).
+ */
int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
{
struct nand_chip *this = mtd->priv;
- int len, res = 0, writeops = 0;
+ int len, res = 0;
int chip, chipsel;
uint8_t *buf;
struct nand_bbt_descr *td = this->bbt_td;
len = (1 << this->bbt_erase_shift);
len += (len >> this->page_shift) * mtd->oobsize;
buf = kmalloc(len, GFP_KERNEL);
- if (!buf) {
- printk(KERN_ERR "nand_update_bbt: Out of memory\n");
+ if (!buf)
return -ENOMEM;
- }
-
- writeops = md != NULL ? 0x03 : 0x01;
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP) {
chip = (int)(offs >> this->chip_shift);
chipsel = chip;
if (md)
md->version[chip]++;
- /* Write the bad block table to the device ? */
- if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
+ /* Write the bad block table to the device? */
+ if (td->options & NAND_BBT_WRITE) {
res = write_bbt(mtd, buf, td, md, chipsel);
if (res < 0)
goto out;
}
- /* Write the mirror bad block table to the device ? */
- if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
+ /* Write the mirror bad block table to the device? */
+ if (md && (md->options & NAND_BBT_WRITE)) {
res = write_bbt(mtd, buf, md, td, chipsel);
}
return res;
}
-/* Define some generic bad / good block scan pattern which are used
- * while scanning a device for factory marked good / bad blocks. */
+/*
+ * Define some generic bad / good block scan pattern which are used
+ * while scanning a device for factory marked good / bad blocks.
+ */
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 };
.pattern = scan_agand_pattern
};
-/* Generic flash bbt decriptors
-*/
+/* Generic flash bbt descriptors */
static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
.pattern = mirror_pattern
};
-#define BBT_SCAN_OPTIONS (NAND_BBT_SCANLASTPAGE | NAND_BBT_SCAN2NDPAGE | \
- NAND_BBT_SCANBYTE1AND6)
+#define BADBLOCK_SCAN_MASK (~NAND_BBT_NO_OOB)
/**
- * nand_create_default_bbt_descr - [Internal] Creates a BBT descriptor structure
- * @this: NAND chip to create descriptor for
+ * nand_create_badblock_pattern - [INTERN] Creates a BBT descriptor structure
+ * @this: NAND chip to create descriptor for
*
* This function allocates and initializes a nand_bbt_descr for BBM detection
- * based on the properties of "this". The new descriptor is stored in
+ * based on the properties of @this. The new descriptor is stored in
* this->badblock_pattern. Thus, this->badblock_pattern should be NULL when
* passed to this function.
- *
*/
-static int nand_create_default_bbt_descr(struct nand_chip *this)
+static int nand_create_badblock_pattern(struct nand_chip *this)
{
struct nand_bbt_descr *bd;
if (this->badblock_pattern) {
- printk(KERN_WARNING "BBT descr already allocated; not replacing.\n");
+ pr_warn("Bad block pattern already allocated; not replacing\n");
return -EINVAL;
}
bd = kzalloc(sizeof(*bd), GFP_KERNEL);
- if (!bd) {
- printk(KERN_ERR "nand_create_default_bbt_descr: Out of memory\n");
+ if (!bd)
return -ENOMEM;
- }
- bd->options = this->options & BBT_SCAN_OPTIONS;
+ bd->options = this->bbt_options & BADBLOCK_SCAN_MASK;
bd->offs = this->badblockpos;
bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1;
bd->pattern = scan_ff_pattern;
/**
* nand_default_bbt - [NAND Interface] Select a default bad block table for the device
- * @mtd: MTD device structure
- *
- * This function selects the default bad block table
- * support for the device and calls the nand_scan_bbt function
+ * @mtd: MTD device structure
*
-*/
+ * This function selects the default bad block table support for the device and
+ * calls the nand_scan_bbt function.
+ */
int nand_default_bbt(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
- /* Default for AG-AND. We must use a flash based
- * bad block table as the devices have factory marked
- * _good_ blocks. Erasing those blocks leads to loss
- * of the good / bad information, so we _must_ store
- * this information in a good / bad table during
- * startup
+ /*
+ * Default for AG-AND. We must use a flash based bad block table as the
+ * devices have factory marked _good_ blocks. Erasing those blocks
+ * leads to loss of the good / bad information, so we _must_ store this
+ * information in a good / bad table during startup.
*/
if (this->options & NAND_IS_AND) {
/* Use the default pattern descriptors */
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
}
- this->options |= NAND_USE_FLASH_BBT;
+ this->bbt_options |= NAND_BBT_USE_FLASH;
return nand_scan_bbt(mtd, &agand_flashbased);
}
- /* Is a flash based bad block table requested ? */
- if (this->options & NAND_USE_FLASH_BBT) {
+ /* Is a flash based bad block table requested? */
+ if (this->bbt_options & NAND_BBT_USE_FLASH) {
/* Use the default pattern descriptors */
if (!this->bbt_td) {
- if (this->options & NAND_USE_FLASH_BBT_NO_OOB) {
+ if (this->bbt_options & NAND_BBT_NO_OOB) {
this->bbt_td = &bbt_main_no_bbt_descr;
this->bbt_md = &bbt_mirror_no_bbt_descr;
} else {
}
if (!this->badblock_pattern)
- nand_create_default_bbt_descr(this);
+ nand_create_badblock_pattern(this);
return nand_scan_bbt(mtd, this->badblock_pattern);
}
/**
* nand_isbad_bbt - [NAND Interface] Check if a block is bad
- * @mtd: MTD device structure
- * @offs: offset in the device
- * @allowbbt: allow access to bad block table region
- *
-*/
+ * @mtd: MTD device structure
+ * @offs: offset in the device
+ * @allowbbt: allow access to bad block table region
+ */
int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
{
struct nand_chip *this = mtd->priv;
block = (int)(offs >> (this->bbt_erase_shift - 1));
res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
- DEBUG(MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
- (unsigned int)offs, block >> 1, res);
+ pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: "
+ "(block %d) 0x%02x\n",
+ (unsigned int)offs, block >> 1, res);
switch ((int)res) {
case 0x00:
buf[errloc[i] >> 3] ^= (1 << (errloc[i] & 7));
/* else error in ecc, no action needed */
- DEBUG(MTD_DEBUG_LEVEL0, "%s: corrected bitflip %u\n",
- __func__, errloc[i]);
+ pr_debug("%s: corrected bitflip %u\n", __func__,
+ errloc[i]);
}
} else if (count < 0) {
printk(KERN_ERR "ecc unrecoverable error\n");
/*
* addressbits is a lookup table to filter out the bits from the xor-ed
- * ecc data that identify the faulty location.
+ * ECC data that identify the faulty location.
* this is only used for repairing parity
* see the comments in nand_correct_data for more details
*/
* __nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
* block
* @buf: input buffer with raw data
- * @eccsize: data bytes per ecc step (256 or 512)
+ * @eccsize: data bytes per ECC step (256 or 512)
* @code: output buffer with ECC
*/
void __nand_calculate_ecc(const unsigned char *buf, unsigned int eccsize,
rp17 = (par ^ rp16) & 0xff;
/*
- * Finally calculate the ecc bits.
+ * Finally calculate the ECC bits.
* Again here it might seem that there are performance optimisations
* possible, but benchmarks showed that on the system this is developed
* the code below is the fastest
* @buf: raw data read from the chip
* @read_ecc: ECC from the chip
* @calc_ecc: the ECC calculated from raw data
- * @eccsize: data bytes per ecc step (256 or 512)
+ * @eccsize: data bytes per ECC step (256 or 512)
*
* Detect and correct a 1 bit error for eccsize byte block
*/
}
/* count nr of bits; use table lookup, faster than calculating it */
if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
- return 1; /* error in ecc data; no action needed */
+ return 1; /* error in ECC data; no action needed */
printk(KERN_ERR "uncorrectable error : ");
return -1;
switch (bbt) {
case 2:
- chip->options |= NAND_USE_FLASH_BBT_NO_OOB;
+ chip->bbt_options |= NAND_BBT_NO_OOB;
case 1:
- chip->options |= NAND_USE_FLASH_BBT;
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
case 0:
break;
default:
struct nand_chip chip;
int chip_select;
struct nand_hw_control ndfc_control;
- struct mtd_partition *parts;
};
static struct ndfc_controller ndfc_ctrl[NDFC_MAX_CS];
static int ndfc_chip_init(struct ndfc_controller *ndfc,
struct device_node *node)
{
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- static const char *part_types[] = { "cmdlinepart", NULL };
-#else
- static const char *part_types[] = { NULL };
-#endif
struct device_node *flash_np;
struct nand_chip *chip = &ndfc->chip;
+ struct mtd_part_parser_data ppdata;
int ret;
chip->IO_ADDR_R = ndfc->ndfcbase + NDFC_DATA;
if (!flash_np)
return -ENODEV;
+ ppdata->of_node = flash_np;
ndfc->mtd.name = kasprintf(GFP_KERNEL, "%s.%s",
dev_name(&ndfc->ofdev->dev), flash_np->name);
if (!ndfc->mtd.name) {
if (ret)
goto err;
- ret = parse_mtd_partitions(&ndfc->mtd, part_types, &ndfc->parts, 0);
- if (ret < 0)
- goto err;
-
- if (ret == 0) {
- ret = of_mtd_parse_partitions(&ndfc->ofdev->dev, flash_np,
- &ndfc->parts);
- if (ret < 0)
- goto err;
- }
-
- ret = mtd_device_register(&ndfc->mtd, ndfc->parts, ret);
+ ret = mtd_device_parse_register(&ndfc->mtd, NULL, &ppdata, NULL, 0);
err:
of_node_put(flash_np);
struct ndfc_controller *ndfc = dev_get_drvdata(&ofdev->dev);
nand_release(&ndfc->mtd);
+ kfree(ndfc->mtd.name);
return 0;
}
pdata->exit();
if (host) {
+ nand_release(&host->mtd);
iounmap(host->cmd_va);
iounmap(host->data_va);
iounmap(host->addr_va);
struct nuc900_nand *nuc900_nand = platform_get_drvdata(pdev);
struct resource *res;
+ nand_release(&nuc900_nand->mtd);
iounmap(nuc900_nand->reg);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
#define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0)
#define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1)
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
/* oob info generated runtime depending on ecc algorithm and layout selected */
static struct nand_ecclayout omap_oobinfo;
/* Define some generic bad / good block scan pattern which are used
struct nand_hw_control controller;
struct omap_nand_platform_data *pdata;
struct mtd_info mtd;
- struct mtd_partition *parts;
struct nand_chip nand;
struct platform_device *pdev;
case 1:
/* Uncorrectable error */
- DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR 1\n");
+ pr_debug("ECC UNCORRECTED_ERROR 1\n");
return -1;
case 11:
/* UN-Correctable error */
- DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR B\n");
+ pr_debug("ECC UNCORRECTED_ERROR B\n");
return -1;
case 12:
find_bit = (ecc_bit[5] << 2) + (ecc_bit[3] << 1) + ecc_bit[1];
- DEBUG(MTD_DEBUG_LEVEL0, "Correcting single bit ECC error at "
- "offset: %d, bit: %d\n", find_byte, find_bit);
+ pr_debug("Correcting single bit ECC error at offset: "
+ "%d, bit: %d\n", find_byte, find_bit);
page_data[find_byte] ^= (1 << find_bit);
ecc_data2[2] == 0)
return 0;
}
- DEBUG(MTD_DEBUG_LEVEL0, "UNCORRECTED_ERROR default\n");
+ pr_debug("UNCORRECTED_ERROR default\n");
return -1;
}
}
goto out_release_mem_region;
}
- err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
- if (err > 0)
- mtd_device_register(&info->mtd, info->parts, err);
- else if (pdata->parts)
- mtd_device_register(&info->mtd, pdata->parts, pdata->nr_parts);
- else
- mtd_device_register(&info->mtd, NULL, 0);
+ mtd_device_parse_register(&info->mtd, NULL, 0,
+ pdata->parts, pdata->nr_parts);
platform_set_drvdata(pdev, &info->mtd);
#include <mach/hardware.h>
#include <plat/orion_nand.h>
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *nc = mtd->priv;
struct resource *res;
void __iomem *io_base;
int ret = 0;
- struct mtd_partition *partitions = NULL;
- int num_part = 0;
nc = kzalloc(sizeof(struct nand_chip) + sizeof(struct mtd_info), GFP_KERNEL);
if (!nc) {
goto no_dev;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
mtd->name = "orion_nand";
- num_part = parse_mtd_partitions(mtd, part_probes, &partitions, 0);
-#endif
- /* If cmdline partitions have been passed, let them be used */
- if (num_part <= 0) {
- num_part = board->nr_parts;
- partitions = board->parts;
- }
-
- ret = mtd_device_register(mtd, partitions, num_part);
+ ret = mtd_device_parse_register(mtd, NULL, 0,
+ board->parts, board->nr_parts);
if (ret) {
nand_release(mtd);
goto no_dev;
chip->ecc.mode = NAND_ECC_SOFT;
/* Enable the following for a flash based bad block table */
- chip->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
+ chip->options = NAND_NO_AUTOINCR;
+ chip->bbt_options = NAND_BBT_USE_FLASH;
/* Scan to find existence of the device */
if (nand_scan(pasemi_nand_mtd, 1)) {
struct nand_chip chip;
struct mtd_info mtd;
void __iomem *io_base;
- int nr_parts;
- struct mtd_partition *parts;
};
/*
data->chip.read_buf = pdata->ctrl.read_buf;
data->chip.chip_delay = pdata->chip.chip_delay;
data->chip.options |= pdata->chip.options;
+ data->chip.bbt_options |= pdata->chip.bbt_options;
data->chip.ecc.hwctl = pdata->ctrl.hwcontrol;
data->chip.ecc.layout = pdata->chip.ecclayout;
goto out;
}
- if (pdata->chip.part_probe_types) {
- err = parse_mtd_partitions(&data->mtd,
- pdata->chip.part_probe_types,
- &data->parts, 0);
- if (err > 0) {
- mtd_device_register(&data->mtd, data->parts, err);
- return 0;
- }
- }
- if (pdata->chip.set_parts)
- pdata->chip.set_parts(data->mtd.size, &pdata->chip);
- if (pdata->chip.partitions) {
- data->parts = pdata->chip.partitions;
- err = mtd_device_register(&data->mtd, data->parts,
- pdata->chip.nr_partitions);
- } else
- err = mtd_device_register(&data->mtd, NULL, 0);
+ err = mtd_device_parse_register(&data->mtd,
+ pdata->chip.part_probe_types, 0,
+ pdata->chip.partitions, pdata->chip.nr_partitions);
if (!err)
return err;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
nand_release(&data->mtd);
- if (data->parts && data->parts != pdata->chip.partitions)
- kfree(data->parts);
if (pdata->ctrl.remove)
pdata->ctrl.remove(pdev);
iounmap(data->io_base);
#define NUM_PARTITIONS 1
-extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, const char *mtd_id);
-
/*
* hardware specific access to control-lines
*/
}
#endif
-const char *part_probes[] = { "cmdlinepart", NULL };
-const char *part_probes_evb[] = { "cmdlinepart", NULL };
-
/*
* Main initialization routine
*/
static int __init ppchameleonevb_init(void)
{
struct nand_chip *this;
- const char *part_type = 0;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = 0;
void __iomem *ppchameleon_fio_base;
void __iomem *ppchameleonevb_fio_base;
#endif
ppchameleon_mtd->name = "ppchameleon-nand";
- mtd_parts_nb = parse_mtd_partitions(ppchameleon_mtd, part_probes, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-
- if (mtd_parts_nb == 0) {
- if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
- mtd_parts = partition_info_me;
- else
- mtd_parts = partition_info_hi;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
/* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- mtd_device_register(ppchameleon_mtd, mtd_parts, mtd_parts_nb);
+ mtd_device_parse_register(ppchameleon_mtd, NULL, 0,
+ ppchameleon_mtd->size == NAND_SMALL_SIZE ?
+ partition_info_me :
+ partition_info_hi,
+ NUM_PARTITIONS);
nand_evb_init:
/****************************
}
ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME;
- mtd_parts_nb = parse_mtd_partitions(ppchameleonevb_mtd, part_probes_evb, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-
- if (mtd_parts_nb == 0) {
- mtd_parts = partition_info_evb;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
/* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- mtd_device_register(ppchameleonevb_mtd, mtd_parts, mtd_parts_nb);
+ mtd_device_parse_register(ppchameleonevb_mtd, NULL, 0,
+ ppchameleon_mtd->size == NAND_SMALL_SIZE ?
+ partition_info_me :
+ partition_info_hi,
+ NUM_PARTITIONS);
/* Return happy */
return 0;
enum {
STATE_IDLE = 0,
+ STATE_PREPARED,
STATE_CMD_HANDLE,
STATE_DMA_READING,
STATE_DMA_WRITING,
STATE_READY,
};
-struct pxa3xx_nand_info {
- struct nand_chip nand_chip;
+struct pxa3xx_nand_host {
+ struct nand_chip chip;
+ struct pxa3xx_nand_cmdset *cmdset;
+ struct mtd_info *mtd;
+ void *info_data;
+
+ /* page size of attached chip */
+ unsigned int page_size;
+ int use_ecc;
+ int cs;
+ /* calculated from pxa3xx_nand_flash data */
+ unsigned int col_addr_cycles;
+ unsigned int row_addr_cycles;
+ size_t read_id_bytes;
+
+ /* cached register value */
+ uint32_t reg_ndcr;
+ uint32_t ndtr0cs0;
+ uint32_t ndtr1cs0;
+};
+
+struct pxa3xx_nand_info {
struct nand_hw_control controller;
struct platform_device *pdev;
- struct pxa3xx_nand_cmdset *cmdset;
struct clk *clk;
void __iomem *mmio_base;
unsigned long mmio_phys;
+ struct completion cmd_complete;
unsigned int buf_start;
unsigned int buf_count;
- struct mtd_info *mtd;
/* DMA information */
int drcmr_dat;
int drcmr_cmd;
unsigned char *data_buff;
unsigned char *oob_buff;
dma_addr_t data_buff_phys;
- size_t data_buff_size;
int data_dma_ch;
struct pxa_dma_desc *data_desc;
dma_addr_t data_desc_addr;
- uint32_t reg_ndcr;
-
- /* saved column/page_addr during CMD_SEQIN */
- int seqin_column;
- int seqin_page_addr;
-
- /* relate to the command */
+ struct pxa3xx_nand_host *host[NUM_CHIP_SELECT];
unsigned int state;
+ int cs;
int use_ecc; /* use HW ECC ? */
int use_dma; /* use DMA ? */
int is_ready;
unsigned int page_size; /* page size of attached chip */
unsigned int data_size; /* data size in FIFO */
+ unsigned int oob_size;
int retcode;
- struct completion cmd_complete;
/* generated NDCBx register values */
uint32_t ndcb0;
uint32_t ndcb1;
uint32_t ndcb2;
-
- /* timing calcuted from setting */
- uint32_t ndtr0cs0;
- uint32_t ndtr1cs0;
-
- /* calculated from pxa3xx_nand_flash data */
- size_t oob_size;
- size_t read_id_bytes;
-
- unsigned int col_addr_cycles;
- unsigned int row_addr_cycles;
};
static int use_dma = 1;
/* Define a default flash type setting serve as flash detecting only */
#define DEFAULT_FLASH_TYPE (&builtin_flash_types[0])
-const char *mtd_names[] = {"pxa3xx_nand-0", NULL};
+const char *mtd_names[] = {"pxa3xx_nand-0", "pxa3xx_nand-1", NULL};
#define NDTR0_tCH(c) (min((c), 7) << 19)
#define NDTR0_tCS(c) (min((c), 7) << 16)
/* convert nano-seconds to nand flash controller clock cycles */
#define ns2cycle(ns, clk) (int)((ns) * (clk / 1000000) / 1000)
-static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
+static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,
const struct pxa3xx_nand_timing *t)
{
+ struct pxa3xx_nand_info *info = host->info_data;
unsigned long nand_clk = clk_get_rate(info->clk);
uint32_t ndtr0, ndtr1;
NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) |
NDTR1_tAR(ns2cycle(t->tAR, nand_clk));
- info->ndtr0cs0 = ndtr0;
- info->ndtr1cs0 = ndtr1;
+ host->ndtr0cs0 = ndtr0;
+ host->ndtr1cs0 = ndtr1;
nand_writel(info, NDTR0CS0, ndtr0);
nand_writel(info, NDTR1CS0, ndtr1);
}
static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info)
{
- int oob_enable = info->reg_ndcr & NDCR_SPARE_EN;
+ struct pxa3xx_nand_host *host = info->host[info->cs];
+ int oob_enable = host->reg_ndcr & NDCR_SPARE_EN;
- info->data_size = info->page_size;
+ info->data_size = host->page_size;
if (!oob_enable) {
info->oob_size = 0;
return;
}
- switch (info->page_size) {
+ switch (host->page_size) {
case 2048:
info->oob_size = (info->use_ecc) ? 40 : 64;
break;
*/
static void pxa3xx_nand_start(struct pxa3xx_nand_info *info)
{
+ struct pxa3xx_nand_host *host = info->host[info->cs];
uint32_t ndcr;
- ndcr = info->reg_ndcr;
+ ndcr = host->reg_ndcr;
ndcr |= info->use_ecc ? NDCR_ECC_EN : 0;
ndcr |= info->use_dma ? NDCR_DMA_EN : 0;
ndcr |= NDCR_ND_RUN;
DIV_ROUND_UP(info->oob_size, 4));
break;
default:
- printk(KERN_ERR "%s: invalid state %d\n", __func__,
+ dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
info->state);
BUG();
}
desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC;
break;
default:
- printk(KERN_ERR "%s: invalid state %d\n", __func__,
+ dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
info->state);
BUG();
}
{
struct pxa3xx_nand_info *info = devid;
unsigned int status, is_completed = 0;
+ unsigned int ready, cmd_done;
+
+ if (info->cs == 0) {
+ ready = NDSR_FLASH_RDY;
+ cmd_done = NDSR_CS0_CMDD;
+ } else {
+ ready = NDSR_RDY;
+ cmd_done = NDSR_CS1_CMDD;
+ }
status = nand_readl(info, NDSR);
handle_data_pio(info);
}
}
- if (status & NDSR_CS0_CMDD) {
+ if (status & cmd_done) {
info->state = STATE_CMD_DONE;
is_completed = 1;
}
- if (status & NDSR_FLASH_RDY) {
+ if (status & ready) {
info->is_ready = 1;
info->state = STATE_READY;
}
return IRQ_HANDLED;
}
-static int pxa3xx_nand_dev_ready(struct mtd_info *mtd)
-{
- struct pxa3xx_nand_info *info = mtd->priv;
- return (nand_readl(info, NDSR) & NDSR_RDY) ? 1 : 0;
-}
-
static inline int is_buf_blank(uint8_t *buf, size_t len)
{
for (; len > 0; len--)
uint16_t column, int page_addr)
{
uint16_t cmd;
- int addr_cycle, exec_cmd, ndcb0;
- struct mtd_info *mtd = info->mtd;
+ int addr_cycle, exec_cmd;
+ struct pxa3xx_nand_host *host;
+ struct mtd_info *mtd;
- ndcb0 = 0;
+ host = info->host[info->cs];
+ mtd = host->mtd;
addr_cycle = 0;
exec_cmd = 1;
info->use_ecc = 0;
info->is_ready = 0;
info->retcode = ERR_NONE;
+ if (info->cs != 0)
+ info->ndcb0 = NDCB0_CSEL;
+ else
+ info->ndcb0 = 0;
switch (command) {
case NAND_CMD_READ0:
break;
}
- info->ndcb0 = ndcb0;
- addr_cycle = NDCB0_ADDR_CYC(info->row_addr_cycles
- + info->col_addr_cycles);
+ addr_cycle = NDCB0_ADDR_CYC(host->row_addr_cycles
+ + host->col_addr_cycles);
switch (command) {
case NAND_CMD_READOOB:
case NAND_CMD_READ0:
- cmd = info->cmdset->read1;
+ cmd = host->cmdset->read1;
if (command == NAND_CMD_READOOB)
info->buf_start = mtd->writesize + column;
else
info->buf_start = column;
- if (unlikely(info->page_size < PAGE_CHUNK_SIZE))
+ if (unlikely(host->page_size < PAGE_CHUNK_SIZE))
info->ndcb0 |= NDCB0_CMD_TYPE(0)
| addr_cycle
| (cmd & NDCB0_CMD1_MASK);
case NAND_CMD_SEQIN:
/* small page addr setting */
- if (unlikely(info->page_size < PAGE_CHUNK_SIZE)) {
+ if (unlikely(host->page_size < PAGE_CHUNK_SIZE)) {
info->ndcb1 = ((page_addr & 0xFFFFFF) << 8)
| (column & 0xFF);
break;
}
- cmd = info->cmdset->program;
+ cmd = host->cmdset->program;
info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
| NDCB0_AUTO_RS
| NDCB0_ST_ROW_EN
break;
case NAND_CMD_READID:
- cmd = info->cmdset->read_id;
- info->buf_count = info->read_id_bytes;
+ cmd = host->cmdset->read_id;
+ info->buf_count = host->read_id_bytes;
info->ndcb0 |= NDCB0_CMD_TYPE(3)
| NDCB0_ADDR_CYC(1)
| cmd;
info->data_size = 8;
break;
case NAND_CMD_STATUS:
- cmd = info->cmdset->read_status;
+ cmd = host->cmdset->read_status;
info->buf_count = 1;
info->ndcb0 |= NDCB0_CMD_TYPE(4)
| NDCB0_ADDR_CYC(1)
break;
case NAND_CMD_ERASE1:
- cmd = info->cmdset->erase;
+ cmd = host->cmdset->erase;
info->ndcb0 |= NDCB0_CMD_TYPE(2)
| NDCB0_AUTO_RS
| NDCB0_ADDR_CYC(3)
break;
case NAND_CMD_RESET:
- cmd = info->cmdset->reset;
+ cmd = host->cmdset->reset;
info->ndcb0 |= NDCB0_CMD_TYPE(5)
| cmd;
default:
exec_cmd = 0;
- printk(KERN_ERR "pxa3xx-nand: non-supported"
- " command %x\n", command);
+ dev_err(&info->pdev->dev, "non-supported command %x\n",
+ command);
break;
}
static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
int column, int page_addr)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
int ret, exec_cmd;
/*
* "byte" address into a "word" address appropriate
* for indexing a word-oriented device
*/
- if (info->reg_ndcr & NDCR_DWIDTH_M)
+ if (host->reg_ndcr & NDCR_DWIDTH_M)
column /= 2;
+ /*
+ * There may be different NAND chip hooked to
+ * different chip select, so check whether
+ * chip select has been changed, if yes, reset the timing
+ */
+ if (info->cs != host->cs) {
+ info->cs = host->cs;
+ nand_writel(info, NDTR0CS0, host->ndtr0cs0);
+ nand_writel(info, NDTR1CS0, host->ndtr1cs0);
+ }
+
+ info->state = STATE_PREPARED;
exec_cmd = prepare_command_pool(info, command, column, page_addr);
if (exec_cmd) {
init_completion(&info->cmd_complete);
ret = wait_for_completion_timeout(&info->cmd_complete,
CHIP_DELAY_TIMEOUT);
if (!ret) {
- printk(KERN_ERR "Wait time out!!!\n");
+ dev_err(&info->pdev->dev, "Wait time out!!!\n");
/* Stop State Machine for next command cycle */
pxa3xx_nand_stop(info);
}
- info->state = STATE_IDLE;
}
+ info->state = STATE_IDLE;
}
static void pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
struct nand_chip *chip, uint8_t *buf, int page)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
chip->read_buf(mtd, buf, mtd->writesize);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
* OOB, ignore such double bit errors
*/
if (is_buf_blank(buf, mtd->writesize))
+ info->retcode = ERR_NONE;
+ else
mtd->ecc_stats.failed++;
}
static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
char retval = 0xFF;
if (info->buf_start < info->buf_count)
static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
u16 retval = 0xFFFF;
if (!(info->buf_start & 0x01) && info->buf_start < info->buf_count) {
static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
memcpy(buf, info->data_buff + info->buf_start, real_len);
static void pxa3xx_nand_write_buf(struct mtd_info *mtd,
const uint8_t *buf, int len)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
memcpy(info->data_buff + info->buf_start, buf, real_len);
static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
/* pxa3xx_nand_send_command has waited for command complete */
if (this->state == FL_WRITING || this->state == FL_ERASING) {
{
struct platform_device *pdev = info->pdev;
struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
+ struct pxa3xx_nand_host *host = info->host[info->cs];
uint32_t ndcr = 0x0; /* enable all interrupts */
- if (f->page_size != 2048 && f->page_size != 512)
+ if (f->page_size != 2048 && f->page_size != 512) {
+ dev_err(&pdev->dev, "Current only support 2048 and 512 size\n");
return -EINVAL;
+ }
- if (f->flash_width != 16 && f->flash_width != 8)
+ if (f->flash_width != 16 && f->flash_width != 8) {
+ dev_err(&pdev->dev, "Only support 8bit and 16 bit!\n");
return -EINVAL;
+ }
/* calculate flash information */
- info->cmdset = &default_cmdset;
- info->page_size = f->page_size;
- info->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
+ host->cmdset = &default_cmdset;
+ host->page_size = f->page_size;
+ host->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
/* calculate addressing information */
- info->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
+ host->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
if (f->num_blocks * f->page_per_block > 65536)
- info->row_addr_cycles = 3;
+ host->row_addr_cycles = 3;
else
- info->row_addr_cycles = 2;
+ host->row_addr_cycles = 2;
ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
- ndcr |= (info->col_addr_cycles == 2) ? NDCR_RA_START : 0;
+ ndcr |= (host->col_addr_cycles == 2) ? NDCR_RA_START : 0;
ndcr |= (f->page_per_block == 64) ? NDCR_PG_PER_BLK : 0;
ndcr |= (f->page_size == 2048) ? NDCR_PAGE_SZ : 0;
ndcr |= (f->flash_width == 16) ? NDCR_DWIDTH_M : 0;
ndcr |= (f->dfc_width == 16) ? NDCR_DWIDTH_C : 0;
- ndcr |= NDCR_RD_ID_CNT(info->read_id_bytes);
+ ndcr |= NDCR_RD_ID_CNT(host->read_id_bytes);
ndcr |= NDCR_SPARE_EN; /* enable spare by default */
- info->reg_ndcr = ndcr;
+ host->reg_ndcr = ndcr;
- pxa3xx_nand_set_timing(info, f->timing);
+ pxa3xx_nand_set_timing(host, f->timing);
return 0;
}
static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
{
+ /*
+ * We set 0 by hard coding here, for we don't support keep_config
+ * when there is more than one chip attached to the controller
+ */
+ struct pxa3xx_nand_host *host = info->host[0];
uint32_t ndcr = nand_readl(info, NDCR);
- info->page_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
- /* set info fields needed to read id */
- info->read_id_bytes = (info->page_size == 2048) ? 4 : 2;
- info->reg_ndcr = ndcr;
- info->cmdset = &default_cmdset;
- info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
- info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
+ if (ndcr & NDCR_PAGE_SZ) {
+ host->page_size = 2048;
+ host->read_id_bytes = 4;
+ } else {
+ host->page_size = 512;
+ host->read_id_bytes = 2;
+ }
+
+ host->reg_ndcr = ndcr & ~NDCR_INT_MASK;
+ host->cmdset = &default_cmdset;
+
+ host->ndtr0cs0 = nand_readl(info, NDTR0CS0);
+ host->ndtr1cs0 = nand_readl(info, NDTR1CS0);
return 0;
}
return -ENOMEM;
}
- info->data_buff_size = MAX_BUFF_SIZE;
info->data_desc = (void *)info->data_buff + data_desc_offset;
info->data_desc_addr = info->data_buff_phys + data_desc_offset;
pxa3xx_nand_data_dma_irq, info);
if (info->data_dma_ch < 0) {
dev_err(&pdev->dev, "failed to request data dma\n");
- dma_free_coherent(&pdev->dev, info->data_buff_size,
+ dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE,
info->data_buff, info->data_buff_phys);
return info->data_dma_ch;
}
static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info)
{
- struct mtd_info *mtd = info->mtd;
- struct nand_chip *chip = mtd->priv;
-
+ struct mtd_info *mtd;
+ int ret;
+ mtd = info->host[info->cs]->mtd;
/* use the common timing to make a try */
- pxa3xx_nand_config_flash(info, &builtin_flash_types[0]);
- chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
+ ret = pxa3xx_nand_config_flash(info, &builtin_flash_types[0]);
+ if (ret)
+ return ret;
+
+ pxa3xx_nand_cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
if (info->is_ready)
- return 1;
- else
return 0;
+
+ return -ENODEV;
}
static int pxa3xx_nand_scan(struct mtd_info *mtd)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
struct platform_device *pdev = info->pdev;
struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
- struct nand_flash_dev pxa3xx_flash_ids[2] = { {NULL,}, {NULL,} };
+ struct nand_flash_dev pxa3xx_flash_ids[2], *def = NULL;
const struct pxa3xx_nand_flash *f = NULL;
struct nand_chip *chip = mtd->priv;
uint32_t id = -1;
goto KEEP_CONFIG;
ret = pxa3xx_nand_sensing(info);
- if (!ret) {
- kfree(mtd);
- info->mtd = NULL;
- printk(KERN_INFO "There is no nand chip on cs 0!\n");
+ if (ret) {
+ dev_info(&info->pdev->dev, "There is no chip on cs %d!\n",
+ info->cs);
- return -EINVAL;
+ return ret;
}
chip->cmdfunc(mtd, NAND_CMD_READID, 0, 0);
id = *((uint16_t *)(info->data_buff));
if (id != 0)
- printk(KERN_INFO "Detect a flash id %x\n", id);
+ dev_info(&info->pdev->dev, "Detect a flash id %x\n", id);
else {
- kfree(mtd);
- info->mtd = NULL;
- printk(KERN_WARNING "Read out ID 0, potential timing set wrong!!\n");
+ dev_warn(&info->pdev->dev,
+ "Read out ID 0, potential timing set wrong!!\n");
return -EINVAL;
}
}
if (i >= (ARRAY_SIZE(builtin_flash_types) + pdata->num_flash - 1)) {
- kfree(mtd);
- info->mtd = NULL;
- printk(KERN_ERR "ERROR!! flash not defined!!!\n");
+ dev_err(&info->pdev->dev, "ERROR!! flash not defined!!!\n");
return -EINVAL;
}
- pxa3xx_nand_config_flash(info, f);
+ ret = pxa3xx_nand_config_flash(info, f);
+ if (ret) {
+ dev_err(&info->pdev->dev, "ERROR! Configure failed\n");
+ return ret;
+ }
+
pxa3xx_flash_ids[0].name = f->name;
pxa3xx_flash_ids[0].id = (f->chip_id >> 8) & 0xffff;
pxa3xx_flash_ids[0].pagesize = f->page_size;
pxa3xx_flash_ids[0].erasesize = f->page_size * f->page_per_block;
if (f->flash_width == 16)
pxa3xx_flash_ids[0].options = NAND_BUSWIDTH_16;
+ pxa3xx_flash_ids[1].name = NULL;
+ def = pxa3xx_flash_ids;
KEEP_CONFIG:
- if (nand_scan_ident(mtd, 1, pxa3xx_flash_ids))
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.size = host->page_size;
+
+ chip->options = NAND_NO_AUTOINCR;
+ chip->options |= NAND_NO_READRDY;
+ if (host->reg_ndcr & NDCR_DWIDTH_M)
+ chip->options |= NAND_BUSWIDTH_16;
+
+ if (nand_scan_ident(mtd, 1, def))
return -ENODEV;
/* calculate addressing information */
- info->col_addr_cycles = (mtd->writesize >= 2048) ? 2 : 1;
+ if (mtd->writesize >= 2048)
+ host->col_addr_cycles = 2;
+ else
+ host->col_addr_cycles = 1;
+
info->oob_buff = info->data_buff + mtd->writesize;
if ((mtd->size >> chip->page_shift) > 65536)
- info->row_addr_cycles = 3;
+ host->row_addr_cycles = 3;
else
- info->row_addr_cycles = 2;
- mtd->name = mtd_names[0];
- chip->ecc.mode = NAND_ECC_HW;
- chip->ecc.size = f->page_size;
-
- chip->options = (f->flash_width == 16) ? NAND_BUSWIDTH_16 : 0;
- chip->options |= NAND_NO_AUTOINCR;
- chip->options |= NAND_NO_READRDY;
+ host->row_addr_cycles = 2;
+ mtd->name = mtd_names[0];
return nand_scan_tail(mtd);
}
-static
-struct pxa3xx_nand_info *alloc_nand_resource(struct platform_device *pdev)
+static int alloc_nand_resource(struct platform_device *pdev)
{
+ struct pxa3xx_nand_platform_data *pdata;
struct pxa3xx_nand_info *info;
+ struct pxa3xx_nand_host *host;
struct nand_chip *chip;
struct mtd_info *mtd;
struct resource *r;
- int ret, irq;
+ int ret, irq, cs;
- mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct pxa3xx_nand_info),
- GFP_KERNEL);
- if (!mtd) {
+ pdata = pdev->dev.platform_data;
+ info = kzalloc(sizeof(*info) + (sizeof(*mtd) +
+ sizeof(*host)) * pdata->num_cs, GFP_KERNEL);
+ if (!info) {
dev_err(&pdev->dev, "failed to allocate memory\n");
- return NULL;
+ return -ENOMEM;
}
- info = (struct pxa3xx_nand_info *)(&mtd[1]);
- chip = (struct nand_chip *)(&mtd[1]);
info->pdev = pdev;
- info->mtd = mtd;
- mtd->priv = info;
- mtd->owner = THIS_MODULE;
-
- chip->ecc.read_page = pxa3xx_nand_read_page_hwecc;
- chip->ecc.write_page = pxa3xx_nand_write_page_hwecc;
- chip->controller = &info->controller;
- chip->waitfunc = pxa3xx_nand_waitfunc;
- chip->select_chip = pxa3xx_nand_select_chip;
- chip->dev_ready = pxa3xx_nand_dev_ready;
- chip->cmdfunc = pxa3xx_nand_cmdfunc;
- chip->read_word = pxa3xx_nand_read_word;
- chip->read_byte = pxa3xx_nand_read_byte;
- chip->read_buf = pxa3xx_nand_read_buf;
- chip->write_buf = pxa3xx_nand_write_buf;
- chip->verify_buf = pxa3xx_nand_verify_buf;
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ mtd = (struct mtd_info *)((unsigned int)&info[1] +
+ (sizeof(*mtd) + sizeof(*host)) * cs);
+ chip = (struct nand_chip *)(&mtd[1]);
+ host = (struct pxa3xx_nand_host *)chip;
+ info->host[cs] = host;
+ host->mtd = mtd;
+ host->cs = cs;
+ host->info_data = info;
+ mtd->priv = host;
+ mtd->owner = THIS_MODULE;
+
+ chip->ecc.read_page = pxa3xx_nand_read_page_hwecc;
+ chip->ecc.write_page = pxa3xx_nand_write_page_hwecc;
+ chip->controller = &info->controller;
+ chip->waitfunc = pxa3xx_nand_waitfunc;
+ chip->select_chip = pxa3xx_nand_select_chip;
+ chip->cmdfunc = pxa3xx_nand_cmdfunc;
+ chip->read_word = pxa3xx_nand_read_word;
+ chip->read_byte = pxa3xx_nand_read_byte;
+ chip->read_buf = pxa3xx_nand_read_buf;
+ chip->write_buf = pxa3xx_nand_write_buf;
+ chip->verify_buf = pxa3xx_nand_verify_buf;
+ }
spin_lock_init(&chip->controller->lock);
init_waitqueue_head(&chip->controller->wq);
platform_set_drvdata(pdev, info);
- return info;
+ return 0;
fail_free_buf:
free_irq(irq, info);
if (use_dma) {
pxa_free_dma(info->data_dma_ch);
- dma_free_coherent(&pdev->dev, info->data_buff_size,
+ dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE,
info->data_buff, info->data_buff_phys);
} else
kfree(info->data_buff);
clk_disable(info->clk);
clk_put(info->clk);
fail_free_mtd:
- kfree(mtd);
- return NULL;
+ kfree(info);
+ return ret;
}
static int pxa3xx_nand_remove(struct platform_device *pdev)
{
struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
- struct mtd_info *mtd = info->mtd;
+ struct pxa3xx_nand_platform_data *pdata;
struct resource *r;
- int irq;
+ int irq, cs;
+ if (!info)
+ return 0;
+
+ pdata = pdev->dev.platform_data;
platform_set_drvdata(pdev, NULL);
irq = platform_get_irq(pdev, 0);
free_irq(irq, info);
if (use_dma) {
pxa_free_dma(info->data_dma_ch);
- dma_free_writecombine(&pdev->dev, info->data_buff_size,
+ dma_free_writecombine(&pdev->dev, MAX_BUFF_SIZE,
info->data_buff, info->data_buff_phys);
} else
kfree(info->data_buff);
clk_disable(info->clk);
clk_put(info->clk);
- if (mtd) {
- mtd_device_unregister(mtd);
- kfree(mtd);
- }
+ for (cs = 0; cs < pdata->num_cs; cs++)
+ nand_release(info->host[cs]->mtd);
+ kfree(info);
return 0;
}
{
struct pxa3xx_nand_platform_data *pdata;
struct pxa3xx_nand_info *info;
+ int ret, cs, probe_success;
pdata = pdev->dev.platform_data;
if (!pdata) {
return -ENODEV;
}
- info = alloc_nand_resource(pdev);
- if (info == NULL)
- return -ENOMEM;
-
- if (pxa3xx_nand_scan(info->mtd)) {
- dev_err(&pdev->dev, "failed to scan nand\n");
- pxa3xx_nand_remove(pdev);
- return -ENODEV;
+ ret = alloc_nand_resource(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "alloc nand resource failed\n");
+ return ret;
}
- if (mtd_has_cmdlinepart()) {
- const char *probes[] = { "cmdlinepart", NULL };
- struct mtd_partition *parts;
- int nr_parts;
+ info = platform_get_drvdata(pdev);
+ probe_success = 0;
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ info->cs = cs;
+ ret = pxa3xx_nand_scan(info->host[cs]->mtd);
+ if (ret) {
+ dev_warn(&pdev->dev, "failed to scan nand at cs %d\n",
+ cs);
+ continue;
+ }
- nr_parts = parse_mtd_partitions(info->mtd, probes, &parts, 0);
+ ret = mtd_device_parse_register(info->host[cs]->mtd, NULL, 0,
+ pdata->parts[cs], pdata->nr_parts[cs]);
+ if (!ret)
+ probe_success = 1;
+ }
- if (nr_parts)
- return mtd_device_register(info->mtd, parts, nr_parts);
+ if (!probe_success) {
+ pxa3xx_nand_remove(pdev);
+ return -ENODEV;
}
- return mtd_device_register(info->mtd, pdata->parts, pdata->nr_parts);
+ return 0;
}
#ifdef CONFIG_PM
static int pxa3xx_nand_suspend(struct platform_device *pdev, pm_message_t state)
{
struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
- struct mtd_info *mtd = info->mtd;
+ struct pxa3xx_nand_platform_data *pdata;
+ struct mtd_info *mtd;
+ int cs;
+ pdata = pdev->dev.platform_data;
if (info->state) {
dev_err(&pdev->dev, "driver busy, state = %d\n", info->state);
return -EAGAIN;
}
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ mtd = info->host[cs]->mtd;
+ mtd->suspend(mtd);
+ }
+
return 0;
}
static int pxa3xx_nand_resume(struct platform_device *pdev)
{
struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
- struct mtd_info *mtd = info->mtd;
+ struct pxa3xx_nand_platform_data *pdata;
+ struct mtd_info *mtd;
+ int cs;
- nand_writel(info, NDTR0CS0, info->ndtr0cs0);
- nand_writel(info, NDTR1CS0, info->ndtr1cs0);
- clk_enable(info->clk);
+ pdata = pdev->dev.platform_data;
+ /* We don't want to handle interrupt without calling mtd routine */
+ disable_int(info, NDCR_INT_MASK);
+
+ /*
+ * Directly set the chip select to a invalid value,
+ * then the driver would reset the timing according
+ * to current chip select at the beginning of cmdfunc
+ */
+ info->cs = 0xff;
+
+ /*
+ * As the spec says, the NDSR would be updated to 0x1800 when
+ * doing the nand_clk disable/enable.
+ * To prevent it damaging state machine of the driver, clear
+ * all status before resume
+ */
+ nand_writel(info, NDSR, NDSR_MASK);
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ mtd = info->host[cs]->mtd;
+ mtd->resume(mtd);
+ }
return 0;
}
}
#ifdef CONFIG_PM
-int r852_suspend(struct device *device)
+static int r852_suspend(struct device *device)
{
struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
return 0;
}
-int r852_resume(struct device *device)
+static int r852_resume(struct device *device)
{
struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
MODULE_DEVICE_TABLE(pci, r852_pci_id_tbl);
-SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
+static SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
static struct pci_driver r852_pci_driver = {
.name = DRV_NAME,
return 0;
}
- /* Read the syndrom pattern from the FPGA and correct the bitorder */
+ /* Read the syndrome pattern from the FPGA and correct the bitorder */
rs_ecc = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC);
for (i = 0; i < 8; i++) {
ecc[i] = bitrev8(*rs_ecc);
/* Let the library code do its magic. */
res = decode_rs8(rs_decoder, (uint8_t *) buf, par, 512, syn, 0, NULL, 0xff, NULL);
if (res > 0) {
- DEBUG(MTD_DEBUG_LEVEL0, "rtc_from4_correct_data: " "ECC corrected %d errors on read\n", res);
+ pr_debug("rtc_from4_correct_data: " "ECC corrected %d errors on read\n", res);
}
return res;
}
len = mtd->writesize;
buf = kmalloc(len, GFP_KERNEL);
if (!buf) {
- printk(KERN_ERR "rtc_from4_errstat: Out of memory!\n");
er_stat = 1;
goto out;
}
/* free the common resources */
- if (info->clk != NULL && !IS_ERR(info->clk)) {
+ if (!IS_ERR(info->clk)) {
s3c2410_nand_clk_set_state(info, CLOCK_DISABLE);
clk_put(info->clk);
}
return 0;
}
-const char *part_probes[] = { "cmdlinepart", NULL };
static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
struct s3c2410_nand_mtd *mtd,
struct s3c2410_nand_set *set)
{
- struct mtd_partition *part_info;
- int nr_part = 0;
+ if (set)
+ mtd->mtd.name = set->name;
- if (set == NULL)
- return mtd_device_register(&mtd->mtd, NULL, 0);
-
- mtd->mtd.name = set->name;
- nr_part = parse_mtd_partitions(&mtd->mtd, part_probes, &part_info, 0);
-
- if (nr_part <= 0 && set->nr_partitions > 0) {
- nr_part = set->nr_partitions;
- part_info = set->partitions;
- }
-
- return mtd_device_register(&mtd->mtd, part_info, nr_part);
+ return mtd_device_parse_register(&mtd->mtd, NULL, 0,
+ set->partitions, set->nr_partitions);
}
/**
/* If you use u-boot BBT creation code, specifying this flag will
* let the kernel fish out the BBT from the NAND, and also skip the
* full NAND scan that can take 1/2s or so. Little things... */
- if (set->flash_bbt)
- chip->options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
+ if (set->flash_bbt) {
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
+ chip->options |= NAND_SKIP_BBTSCAN;
+ }
}
/**
return readb(sharpsl->io + ECCCNTR) != 0;
}
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
/*
* Main initialization routine
*/
static int __devinit sharpsl_nand_probe(struct platform_device *pdev)
{
struct nand_chip *this;
- struct mtd_partition *sharpsl_partition_info;
- int nr_partitions;
struct resource *r;
int err = 0;
struct sharpsl_nand *sharpsl;
/* Register the partitions */
sharpsl->mtd.name = "sharpsl-nand";
- nr_partitions = parse_mtd_partitions(&sharpsl->mtd, part_probes, &sharpsl_partition_info, 0);
- if (nr_partitions <= 0) {
- nr_partitions = data->nr_partitions;
- sharpsl_partition_info = data->partitions;
- }
- err = mtd_device_register(&sharpsl->mtd, sharpsl_partition_info,
- nr_partitions);
+ err = mtd_device_parse_register(&sharpsl->mtd, NULL, 0,
+ data->partitions, data->nr_partitions);
if (err)
goto err_add;
/* As long as this function is called on erase block boundaries
it will work correctly for 256 byte nand */
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = 0;
ops.ooblen = mtd->oobsize;
ops.oobbuf = (void *)&oob;
return 1;
}
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
/*
* Probe for the NAND device.
*/
struct mtd_info *mtd;
struct nand_chip *nand_chip;
int res;
- struct mtd_partition *partitions = NULL;
- int num_partitions = 0;
+ struct mtd_part_parser_data ppdata;
/* Allocate memory for the device structure (and zero it) */
host = kzalloc(sizeof(struct socrates_nand_host), GFP_KERNEL);
mtd->name = "socrates_nand";
mtd->owner = THIS_MODULE;
mtd->dev.parent = &ofdev->dev;
+ ppdata.of_node = ofdev->dev.of_node;
/*should never be accessed directly */
nand_chip->IO_ADDR_R = (void *)0xdeadbeef;
goto out;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- num_partitions = parse_mtd_partitions(mtd, part_probes,
- &partitions, 0);
- if (num_partitions < 0) {
- res = num_partitions;
- goto release;
- }
-#endif
-
- if (num_partitions == 0) {
- num_partitions = of_mtd_parse_partitions(&ofdev->dev,
- ofdev->dev.of_node,
- &partitions);
- if (num_partitions < 0) {
- res = num_partitions;
- goto release;
- }
- }
-
- res = mtd_device_register(mtd, partitions, num_partitions);
+ res = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
if (!res)
return res;
-release:
nand_release(mtd);
out:
#define mtd_to_tmio(m) container_of(m, struct tmio_nand, mtd)
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
/*--------------------------------------------------------------------------*/
struct tmio_nand *tmio;
struct mtd_info *mtd;
struct nand_chip *nand_chip;
- struct mtd_partition *parts;
- int nbparts = 0;
int retval;
if (data == NULL)
goto err_scan;
}
/* Register the partitions */
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- nbparts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
-#endif
- if (nbparts <= 0 && data) {
- parts = data->partition;
- nbparts = data->num_partitions;
- }
-
- retval = mtd_device_register(mtd, parts, nbparts);
+ retval = mtd_device_parse_register(mtd, NULL, 0,
+ data ? data->partition : NULL,
+ data ? data->num_partitions : 0);
if (!retval)
return retval;
unsigned char hold; /* in gbusclock */
unsigned char spw; /* in gbusclock */
struct nand_hw_control hw_control;
- struct mtd_partition *parts[MAX_TXX9NDFMC_DEV];
};
static struct platform_device *mtd_to_platdev(struct mtd_info *mtd)
static int __init txx9ndfmc_probe(struct platform_device *dev)
{
struct txx9ndfmc_platform_data *plat = dev->dev.platform_data;
- static const char *probes[] = { "cmdlinepart", NULL };
int hold, spw;
int i;
struct txx9ndfmc_drvdata *drvdata;
struct txx9ndfmc_priv *txx9_priv;
struct nand_chip *chip;
struct mtd_info *mtd;
- int nr_parts;
if (!(plat->ch_mask & (1 << i)))
continue;
}
mtd->name = txx9_priv->mtdname;
- nr_parts = parse_mtd_partitions(mtd, probes,
- &drvdata->parts[i], 0);
- mtd_device_register(mtd, drvdata->parts[i], nr_parts);
+ mtd_device_parse_register(mtd, NULL, 0, NULL, 0);
drvdata->mtds[i] = mtd;
}
txx9_priv = chip->priv;
nand_release(mtd);
- kfree(drvdata->parts[i]);
kfree(txx9_priv->mtdname);
kfree(txx9_priv);
}
return;
}
- DEBUG(MTD_DEBUG_LEVEL1, "NFTL: add_mtd for %s\n", mtd->name);
+ pr_debug("NFTL: add_mtd for %s\n", mtd->name);
nftl = kzalloc(sizeof(struct NFTLrecord), GFP_KERNEL);
- if (!nftl) {
- printk(KERN_WARNING "NFTL: out of memory for data structures\n");
+ if (!nftl)
return;
- }
nftl->mbd.mtd = mtd;
nftl->mbd.devnum = -1;
{
struct NFTLrecord *nftl = (void *)dev;
- DEBUG(MTD_DEBUG_LEVEL1, "NFTL: remove_dev (i=%d)\n", dev->devnum);
+ pr_debug("NFTL: remove_dev (i=%d)\n", dev->devnum);
del_mtd_blktrans_dev(dev);
kfree(nftl->ReplUnitTable);
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs & mask;
ops.ooblen = len;
ops.oobbuf = buf;
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs & mask;
ops.ooblen = len;
ops.oobbuf = buf;
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs & mask;
ops.ooblen = mtd->oobsize;
ops.oobbuf = oob;
/* Normally, we force a fold to happen before we run out of free blocks completely */
if (!desperate && nftl->numfreeEUNs < 2) {
- DEBUG(MTD_DEBUG_LEVEL1, "NFTL_findfreeblock: there are too few free EUNs\n");
+ pr_debug("NFTL_findfreeblock: there are too few free EUNs\n");
return BLOCK_NIL;
}
if (block == 2) {
foldmark = oob.u.c.FoldMark | oob.u.c.FoldMark1;
if (foldmark == FOLD_MARK_IN_PROGRESS) {
- DEBUG(MTD_DEBUG_LEVEL1,
- "Write Inhibited on EUN %d\n", thisEUN);
+ pr_debug("Write Inhibited on EUN %d\n", thisEUN);
inplace = 0;
} else {
/* There's no other reason not to do inplace,
if (BlockLastState[block] != SECTOR_FREE &&
BlockMap[block] != BLOCK_NIL &&
BlockMap[block] != targetEUN) {
- DEBUG(MTD_DEBUG_LEVEL1, "Setting inplace to 0. VUC %d, "
+ pr_debug("Setting inplace to 0. VUC %d, "
"block %d was %x lastEUN, "
"and is in EUN %d (%s) %d\n",
thisVUC, block, BlockLastState[block],
pendingblock < ((thisVUC + 1)* (nftl->EraseSize / 512)) &&
BlockLastState[pendingblock - (thisVUC * (nftl->EraseSize / 512))] !=
SECTOR_FREE) {
- DEBUG(MTD_DEBUG_LEVEL1, "Pending write not free in EUN %d. "
+ pr_debug("Pending write not free in EUN %d. "
"Folding out of place.\n", targetEUN);
inplace = 0;
}
}
if (!inplace) {
- DEBUG(MTD_DEBUG_LEVEL1, "Cannot fold Virtual Unit Chain %d in place. "
+ pr_debug("Cannot fold Virtual Unit Chain %d in place. "
"Trying out-of-place\n", thisVUC);
/* We need to find a targetEUN to fold into. */
targetEUN = NFTL_findfreeblock(nftl, 1);
and the Erase Unit into which we are supposed to be copying.
Go for it.
*/
- DEBUG(MTD_DEBUG_LEVEL1,"Folding chain %d into unit %d\n", thisVUC, targetEUN);
+ pr_debug("Folding chain %d into unit %d\n", thisVUC, targetEUN);
for (block = 0; block < nftl->EraseSize / 512 ; block++) {
unsigned char movebuf[512];
int ret;
ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block]) + (block * 512),
512, &retlen, movebuf);
- if (ret < 0 && ret != -EUCLEAN) {
+ if (ret < 0 && !mtd_is_bitflip(ret)) {
ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block])
+ (block * 512), 512, &retlen,
movebuf);
has duplicate chains, we need to free one of the chains because it's not necessary any more.
*/
thisEUN = nftl->EUNtable[thisVUC];
- DEBUG(MTD_DEBUG_LEVEL1,"Want to erase\n");
+ pr_debug("Want to erase\n");
/* For each block in the old chain (except the targetEUN of course),
free it and make it available for future use */
(writeEUN * nftl->EraseSize) + blockofs,
8, &retlen, (char *)&bci);
- DEBUG(MTD_DEBUG_LEVEL2, "Status of block %d in EUN %d is %x\n",
+ pr_debug("Status of block %d in EUN %d is %x\n",
block , writeEUN, le16_to_cpu(bci.Status));
status = bci.Status | bci.Status1;
but they are reserved for when we're
desperate. Well, now we're desperate.
*/
- DEBUG(MTD_DEBUG_LEVEL1, "Using desperate==1 to find free EUN to accommodate write to VUC %d\n", thisVUC);
+ pr_debug("Using desperate==1 to find free EUN to accommodate write to VUC %d\n", thisVUC);
writeEUN = NFTL_findfreeblock(nftl, 1);
}
if (writeEUN == BLOCK_NIL) {
size_t retlen;
int res = mtd->read(mtd, ptr, 512, &retlen, buffer);
- if (res < 0 && res != -EUCLEAN)
+ if (res < 0 && !mtd_is_bitflip(res))
return -EIO;
}
return 0;
/* find_boot_record: Find the NFTL Media Header and its Spare copy which contains the
* various device information of the NFTL partition and Bad Unit Table. Update
- * the ReplUnitTable[] table accroding to the Bad Unit Table. ReplUnitTable[]
+ * the ReplUnitTable[] table according to the Bad Unit Table. ReplUnitTable[]
* is used for management of Erase Unit in other routines in nftl.c and nftlmount.c
*/
static int find_boot_record(struct NFTLrecord *nftl)
*
* Return: 0 when succeed, -1 on error.
*
- * ToDo: 1. Is it neceressary to check_free_sector after erasing ??
+ * ToDo: 1. Is it necessary to check_free_sector after erasing ??
*/
int NFTL_formatblock(struct NFTLrecord *nftl, int block)
{
nb_erases = le32_to_cpu(uci.WearInfo);
nb_erases++;
- /* wrap (almost impossible with current flashs) or free block */
+ /* wrap (almost impossible with current flash) or free block */
if (nb_erases == 0)
nb_erases = 1;
* Mark as 'IGNORE' each incorrect sector. This check is only done if the chain
* was being folded when NFTL was interrupted.
*
- * The check_free_sectors in this function is neceressary. There is a possible
+ * The check_free_sectors in this function is necessary. There is a possible
* situation that after writing the Data area, the Block Control Information is
* not updated according (due to power failure or something) which leaves the block
- * in an umconsistent state. So we have to check if a block is really FREE in this
+ * in an inconsistent state. So we have to check if a block is really FREE in this
* case. */
static void check_sectors_in_chain(struct NFTLrecord *nftl, unsigned int first_block)
{
for (;;) {
length++;
- /* avoid infinite loops, although this is guaranted not to
+ /* avoid infinite loops, although this is guaranteed not to
happen because of the previous checks */
if (length >= nftl->nb_blocks) {
printk("nftl: length too long %d !\n", length);
/* format_chain: Format an invalid Virtual Unit chain. It frees all the Erase Units in a
* Virtual Unit Chain, i.e. all the units are disconnected.
*
- * It is not stricly correct to begin from the first block of the chain because
+ * It is not strictly correct to begin from the first block of the chain because
* if we stop the code, we may see again a valid chain if there was a first_block
* flag in a block inside it. But is it really a problem ?
*
- * FixMe: Figure out what the last statesment means. What if power failure when we are
+ * FixMe: Figure out what the last statement means. What if power failure when we are
* in the for (;;) loop formatting blocks ??
*/
static void format_chain(struct NFTLrecord *nftl, unsigned int first_block)
* totally free (only 0xff).
*
* Definition: Free Erase Unit -- A properly erased/formatted Free Erase Unit should have meet the
- * following critia:
+ * following criteria:
* 1. */
static int check_and_mark_free_block(struct NFTLrecord *nftl, int block)
{
erase_mark = le16_to_cpu ((h1.EraseMark | h1.EraseMark1));
if (erase_mark != ERASE_MARK) {
/* if no erase mark, the block must be totally free. This is
- possible in two cases : empty filsystem or interrupted erase (very unlikely) */
+ possible in two cases : empty filesystem or interrupted erase (very unlikely) */
if (check_free_sectors (nftl, block * nftl->EraseSize, nftl->EraseSize, 1) != 0)
return -1;
/* get_fold_mark: Read fold mark from Unit Control Information #2, we use FOLD_MARK_IN_PROGRESS
* to indicate that we are in the progression of a Virtual Unit Chain folding. If the UCI #2
* is FOLD_MARK_IN_PROGRESS when mounting the NFTL, the (previous) folding process is interrupted
- * for some reason. A clean up/check of the VUC is neceressary in this case.
+ * for some reason. A clean up/check of the VUC is necessary in this case.
*
* WARNING: return 0 if read error
*/
printk("Block %d: incorrect logical block: %d expected: %d\n",
block, logical_block, first_logical_block);
/* the chain is incorrect : we must format it,
- but we need to read it completly */
+ but we need to read it completely */
do_format_chain = 1;
}
if (is_first_block) {
printk("Block %d: incorrectly marked as first block in chain\n",
block);
/* the chain is incorrect : we must format it,
- but we need to read it completly */
+ but we need to read it completely */
do_format_chain = 1;
} else {
printk("Block %d: folding in progress - ignoring first block flag\n",
#include <linux/slab.h>
#include <linux/mtd/partitions.h>
-int __devinit of_mtd_parse_partitions(struct device *dev,
- struct device_node *node,
- struct mtd_partition **pparts)
+static int parse_ofpart_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
{
+ struct device_node *node;
const char *partname;
struct device_node *pp;
int nr_parts, i;
+
+ if (!data)
+ return 0;
+
+ node = data->of_node;
+ if (!node)
+ return 0;
+
/* First count the subnodes */
pp = NULL;
nr_parts = 0;
if (!i) {
of_node_put(pp);
- dev_err(dev, "No valid partition found on %s\n", node->full_name);
+ pr_err("No valid partition found on %s\n", node->full_name);
kfree(*pparts);
*pparts = NULL;
return -EINVAL;
return nr_parts;
}
-EXPORT_SYMBOL(of_mtd_parse_partitions);
+
+static struct mtd_part_parser ofpart_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = parse_ofpart_partitions,
+ .name = "ofpart",
+};
+
+static int parse_ofoldpart_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct device_node *dp;
+ int i, plen, nr_parts;
+ const struct {
+ __be32 offset, len;
+ } *part;
+ const char *names;
+
+ if (!data)
+ return 0;
+
+ dp = data->of_node;
+ if (!dp)
+ return 0;
+
+ part = of_get_property(dp, "partitions", &plen);
+ if (!part)
+ return 0; /* No partitions found */
+
+ pr_warning("Device tree uses obsolete partition map binding: %s\n",
+ dp->full_name);
+
+ nr_parts = plen / sizeof(part[0]);
+
+ *pparts = kzalloc(nr_parts * sizeof(*(*pparts)), GFP_KERNEL);
+ if (!pparts)
+ return -ENOMEM;
+
+ names = of_get_property(dp, "partition-names", &plen);
+
+ for (i = 0; i < nr_parts; i++) {
+ (*pparts)[i].offset = be32_to_cpu(part->offset);
+ (*pparts)[i].size = be32_to_cpu(part->len) & ~1;
+ /* bit 0 set signifies read only partition */
+ if (be32_to_cpu(part->len) & 1)
+ (*pparts)[i].mask_flags = MTD_WRITEABLE;
+
+ if (names && (plen > 0)) {
+ int len = strlen(names) + 1;
+
+ (*pparts)[i].name = (char *)names;
+ plen -= len;
+ names += len;
+ } else {
+ (*pparts)[i].name = "unnamed";
+ }
+
+ part++;
+ }
+
+ return nr_parts;
+}
+
+static struct mtd_part_parser ofoldpart_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = parse_ofoldpart_partitions,
+ .name = "ofoldpart",
+};
+
+static int __init ofpart_parser_init(void)
+{
+ int rc;
+ rc = register_mtd_parser(&ofpart_parser);
+ if (rc)
+ goto out;
+
+ rc = register_mtd_parser(&ofoldpart_parser);
+ if (!rc)
+ return 0;
+
+ deregister_mtd_parser(&ofoldpart_parser);
+out:
+ return rc;
+}
+
+module_init(ofpart_parser_init);
MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Parser for MTD partitioning information in device tree");
+MODULE_AUTHOR("Vitaly Wool, David Gibson");
+/*
+ * When MTD core cannot find the requested parser, it tries to load the module
+ * with the same name. Since we provide the ofoldpart parser, we should have
+ * the corresponding alias.
+ */
+MODULE_ALIAS("ofoldpart");
*/
#define DRIVER_NAME "onenand-flash"
-static const char *part_probes[] = { "cmdlinepart", NULL, };
-
struct onenand_info {
struct mtd_info mtd;
- struct mtd_partition *parts;
struct onenand_chip onenand;
};
goto out_iounmap;
}
- err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
- if (err > 0)
- mtd_device_register(&info->mtd, info->parts, err);
- else if (err <= 0 && pdata && pdata->parts)
- mtd_device_register(&info->mtd, pdata->parts, pdata->nr_parts);
- else
- err = mtd_device_register(&info->mtd, NULL, 0);
+ err = mtd_device_parse_register(&info->mtd, NULL, 0,
+ pdata ? pdata->parts : NULL,
+ pdata ? pdata->nr_parts : 0);
platform_set_drvdata(pdev, info);
platform_set_drvdata(pdev, NULL);
if (info) {
- mtd_device_unregister(&info->mtd);
onenand_release(&info->mtd);
release_mem_region(res->start, size);
iounmap(info->onenand.base);
unsigned long phys_base;
int gpio_irq;
struct mtd_info mtd;
- struct mtd_partition *parts;
struct onenand_chip onenand;
struct completion irq_done;
struct completion dma_done;
struct regulator *regulator;
};
-static const char *part_probes[] = { "cmdlinepart", NULL, };
-
static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
{
struct omap2_onenand *c = data;
c->regulator = regulator_get(&pdev->dev, "vonenand");
if (IS_ERR(c->regulator)) {
dev_err(&pdev->dev, "Failed to get regulator\n");
+ r = PTR_ERR(c->regulator);
goto err_release_dma;
}
c->onenand.enable = omap2_onenand_enable;
if ((r = onenand_scan(&c->mtd, 1)) < 0)
goto err_release_regulator;
- r = parse_mtd_partitions(&c->mtd, part_probes, &c->parts, 0);
- if (r > 0)
- r = mtd_device_register(&c->mtd, c->parts, r);
- else if (pdata->parts != NULL)
- r = mtd_device_register(&c->mtd, pdata->parts, pdata->nr_parts);
- else
- r = mtd_device_register(&c->mtd, NULL, 0);
+ r = mtd_device_parse_register(&c->mtd, NULL, 0,
+ pdata ? pdata->parts : NULL,
+ pdata ? pdata->nr_parts : 0);
if (r)
goto err_release_onenand;
err_free_cs:
gpmc_cs_free(c->gpmc_cs);
err_kfree:
- kfree(c->parts);
kfree(c);
return r;
iounmap(c->onenand.base);
release_mem_region(c->phys_base, ONENAND_IO_SIZE);
gpmc_cs_free(c->gpmc_cs);
- kfree(c->parts);
kfree(c);
return 0;
}
/**
- * onenand_transfer_auto_oob - [Internal] oob auto-placement transfer
+ * onenand_transfer_auto_oob - [INTERN] oob auto-placement transfer
* @param mtd MTD device structure
* @param buf destination address
* @param column oob offset to read from
return status;
/* check if we failed due to uncorrectable error */
- if (status != -EBADMSG && status != ONENAND_BBT_READ_ECC_ERROR)
+ if (!mtd_is_eccerr(status) && status != ONENAND_BBT_READ_ECC_ERROR)
return status;
/* check if address lies in MLC region */
int ret = 0;
int writesize = this->writesize;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
- __func__, (unsigned int) from, (int) len);
+ pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
+ (int)len);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
if (unlikely(ret))
ret = onenand_recover_lsb(mtd, from, ret);
onenand_update_bufferram(mtd, from, !ret);
- if (ret == -EBADMSG)
+ if (mtd_is_eccerr(ret))
ret = 0;
if (ret)
break;
thisooblen = oobsize - oobcolumn;
thisooblen = min_t(int, thisooblen, ooblen - oobread);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
else
this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
int ret = 0, boundary = 0;
int writesize = this->writesize;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
- __func__, (unsigned int) from, (int) len);
+ pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
+ (int)len);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
this->command(mtd, ONENAND_CMD_READ, from, writesize);
ret = this->wait(mtd, FL_READING);
onenand_update_bufferram(mtd, from, !ret);
- if (ret == -EBADMSG)
+ if (mtd_is_eccerr(ret))
ret = 0;
}
}
thisooblen = oobsize - oobcolumn;
thisooblen = min_t(int, thisooblen, ooblen - oobread);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
else
this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
/* Now wait for load */
ret = this->wait(mtd, FL_READING);
onenand_update_bufferram(mtd, from, !ret);
- if (ret == -EBADMSG)
+ if (mtd_is_eccerr(ret))
ret = 0;
}
struct mtd_ecc_stats stats;
int read = 0, thislen, column, oobsize;
size_t len = ops->ooblen;
- mtd_oob_mode_t mode = ops->mode;
+ unsigned int mode = ops->mode;
u_char *buf = ops->oobbuf;
int ret = 0, readcmd;
from += ops->ooboffs;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
- __func__, (unsigned int) from, (int) len);
+ pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
+ (int)len);
/* Initialize return length value */
ops->oobretlen = 0;
- if (mode == MTD_OOB_AUTO)
+ if (mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
if (unlikely(ret))
ret = onenand_recover_lsb(mtd, from, ret);
- if (ret && ret != -EBADMSG) {
+ if (ret && !mtd_is_eccerr(ret)) {
printk(KERN_ERR "%s: read failed = 0x%x\n",
__func__, ret);
break;
}
- if (mode == MTD_OOB_AUTO)
+ if (mode == MTD_OPS_AUTO_OOB)
onenand_transfer_auto_oob(mtd, buf, column, thislen);
else
this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
int ret;
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
break;
- case MTD_OOB_RAW:
+ case MTD_OPS_RAW:
/* Not implemented yet */
default:
return -EINVAL;
size_t len = ops->ooblen;
u_char *buf = ops->oobbuf;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %zi\n",
- __func__, (unsigned int) from, len);
+ pr_debug("%s: from = 0x%08x, len = %zi\n", __func__, (unsigned int)from,
+ len);
/* Initialize return value */
ops->oobretlen = 0;
/* Wait for any existing operation to clear */
onenand_panic_wait(mtd);
- DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
- __func__, (unsigned int) to, (int) len);
+ pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
+ (int)len);
/* Initialize retlen, in case of early exit */
*retlen = 0;
}
/**
- * onenand_fill_auto_oob - [Internal] oob auto-placement transfer
+ * onenand_fill_auto_oob - [INTERN] oob auto-placement transfer
* @param mtd MTD device structure
* @param oob_buf oob buffer
* @param buf source address
u_char *oobbuf;
int ret = 0, cmd;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
- __func__, (unsigned int) to, (int) len);
+ pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
+ (int)len);
/* Initialize retlen, in case of early exit */
ops->retlen = 0;
if (!len)
return 0;
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
/* We send data to spare ram with oobsize
* to prevent byte access */
memset(oobbuf, 0xff, mtd->oobsize);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
onenand_fill_auto_oob(mtd, oobbuf, oob, oobcolumn, thisooblen);
else
memcpy(oobbuf + oobcolumn, oob, thisooblen);
/**
- * onenand_write_oob_nolock - [Internal] OneNAND write out-of-band
+ * onenand_write_oob_nolock - [INTERN] OneNAND write out-of-band
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
u_char *oobbuf;
size_t len = ops->ooblen;
const u_char *buf = ops->oobbuf;
- mtd_oob_mode_t mode = ops->mode;
+ unsigned int mode = ops->mode;
to += ops->ooboffs;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
- __func__, (unsigned int) to, (int) len);
+ pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
+ (int)len);
/* Initialize retlen, in case of early exit */
ops->oobretlen = 0;
- if (mode == MTD_OOB_AUTO)
+ if (mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
/* We send data to spare ram with oobsize
* to prevent byte access */
memset(oobbuf, 0xff, mtd->oobsize);
- if (mode == MTD_OOB_AUTO)
+ if (mode == MTD_OPS_AUTO_OOB)
onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen);
else
memcpy(oobbuf + column, buf, thislen);
int ret;
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
break;
- case MTD_OOB_RAW:
+ case MTD_OPS_RAW:
/* Not implemented yet */
default:
return -EINVAL;
}
/**
- * onenand_multiblock_erase - [Internal] erase block(s) using multiblock erase
+ * onenand_multiblock_erase - [INTERN] erase block(s) using multiblock erase
* @param mtd MTD device structure
* @param instr erase instruction
* @param region erase region
/**
- * onenand_block_by_block_erase - [Internal] erase block(s) using regular erase
+ * onenand_block_by_block_erase - [INTERN] erase block(s) using regular erase
* @param mtd MTD device structure
* @param instr erase instruction
* @param region erase region
struct mtd_erase_region_info *region = NULL;
loff_t region_offset = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: start=0x%012llx, len=%llu\n", __func__,
- (unsigned long long) instr->addr, (unsigned long long) instr->len);
+ pr_debug("%s: start=0x%012llx, len=%llu\n", __func__,
+ (unsigned long long)instr->addr,
+ (unsigned long long)instr->len);
/* Do not allow erase past end of device */
if (unlikely((len + addr) > mtd->size)) {
*/
static void onenand_sync(struct mtd_info *mtd)
{
- DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
+ pr_debug("%s: called\n", __func__);
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_SYNCING);
struct bbm_info *bbm = this->bbm;
u_char buf[2] = {0, 0};
struct mtd_oob_ops ops = {
- .mode = MTD_OOB_PLACE,
+ .mode = MTD_OPS_PLACE_OOB,
.ooblen = 2,
.oobbuf = buf,
.ooboffs = 0,
}
/**
- * onenand_otp_write_oob_nolock - [Internal] OneNAND write out-of-band, specific to OTP
+ * onenand_otp_write_oob_nolock - [INTERN] OneNAND write out-of-band, specific to OTP
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
this->command(mtd, ONENAND_CMD_RESET, 0, 0);
this->wait(mtd, FL_RESETING);
} else {
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooblen = len;
ops.oobbuf = buf;
ops.ooboffs = 0;
else if (numbufs == 1) {
this->options |= ONENAND_HAS_4KB_PAGE;
this->options |= ONENAND_HAS_CACHE_PROGRAM;
+ /*
+ * There are two different 4KiB pagesize chips
+ * and no way to detect it by H/W config values.
+ *
+ * To detect the correct NOP for each chips,
+ * It should check the version ID as workaround.
+ *
+ * Now it has as following
+ * KFM4G16Q4M has NOP 4 with version ID 0x0131
+ * KFM4G16Q5M has NOP 1 with versoin ID 0x013e
+ */
+ if ((this->version_id & 0xf) == 0xe)
+ this->options |= ONENAND_HAS_NOP_1;
}
case ONENAND_DEVICE_DENSITY_2Gb:
int i, ret;
int block;
struct mtd_oob_ops ops = {
- .mode = MTD_OOB_PLACE,
+ .mode = MTD_OPS_PLACE_OOB,
.ooboffs = 0,
.ooblen = mtd->oobsize,
.datbuf = NULL,
this->ecclayout = &onenand_oob_128;
mtd->subpage_sft = 2;
}
+ if (ONENAND_IS_NOP_1(this))
+ mtd->subpage_sft = 0;
break;
case 64:
this->ecclayout = &onenand_oob_64;
startblock = 0;
from = 0;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooblen = readlen;
ops.oobbuf = buf;
ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
block = (int) (onenand_block(this, offs) << 1);
res = (bbm->bbt[block >> 3] >> (block & 0x06)) & 0x03;
- DEBUG(MTD_DEBUG_LEVEL2, "onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
+ pr_debug("onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
(unsigned int) offs, block >> 1, res);
switch ((int) res) {
len = this->chipsize >> (this->erase_shift + 2);
/* Allocate memory (2bit per block) and clear the memory bad block table */
bbm->bbt = kzalloc(len, GFP_KERNEL);
- if (!bbm->bbt) {
- printk(KERN_ERR "onenand_scan_bbt: Out of memory\n");
+ if (!bbm->bbt)
return -ENOMEM;
- }
/* Set the bad block position */
bbm->badblockpos = ONENAND_BADBLOCK_POS;
struct resource *dma_res;
unsigned long phys_base;
struct completion complete;
- struct mtd_partition *parts;
};
#define CMD_MAP_00(dev, addr) (dev->cmd_map(MAP_00, ((addr) << 1)))
static struct s3c_onenand *onenand;
-static const char *part_probes[] = { "cmdlinepart", NULL, };
-
static inline int s3c_read_reg(int offset)
{
return readl(onenand->base + offset);
if (s3c_read_reg(MEM_CFG_OFFSET) & ONENAND_SYS_CFG1_SYNC_READ)
dev_info(&onenand->pdev->dev, "OneNAND Sync. Burst Read enabled\n");
- err = parse_mtd_partitions(mtd, part_probes, &onenand->parts, 0);
- if (err > 0)
- mtd_device_register(mtd, onenand->parts, err);
- else if (err <= 0 && pdata && pdata->parts)
- mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
- else
- err = mtd_device_register(mtd, NULL, 0);
+ err = mtd_device_parse_register(mtd, NULL, 0,
+ pdata ? pdata->parts : NULL,
+ pdata ? pdata->nr_parts : 0);
platform_set_drvdata(pdev, mtd);
}
static int parse_redboot_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- unsigned long fis_origin)
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
{
int nrparts = 0;
struct fis_image_desc *buf;
goto out;
}
new_fl->img = &buf[i];
- if (fis_origin) {
- buf[i].flash_base -= fis_origin;
- } else {
- buf[i].flash_base &= master->size-1;
- }
+ if (data && data->origin)
+ buf[i].flash_base -= data->origin;
+ else
+ buf[i].flash_base &= master->size-1;
/* I'm sure the JFFS2 code has done me permanent damage.
* I now think the following is _normal_
.name = "RedBoot",
};
+/* mtd parsers will request the module by parser name */
+MODULE_ALIAS("RedBoot");
+
static int __init redboot_parser_init(void)
{
return register_mtd_parser(&redboot_parser);
MODULE_PARM_DESC(debug, "Debug level (0-2)");
-/* ------------------- sysfs attributtes ---------------------------------- */
+/* ------------------- sysfs attributes ---------------------------------- */
struct sm_sysfs_attribute {
struct device_attribute dev_attr;
char *data;
if ((lba[0] & 0xF8) != 0x10)
return -2;
- /* check parity - endianess doesn't matter */
+ /* check parity - endianness doesn't matter */
if (hweight16(*(uint16_t *)lba) & 1)
return -2;
/*
- * Read LBA asscociated with block
+ * Read LBA associated with block
* returns -1, if block is erased
* returns -2 if error happens
*/
return 0;
}
- /* User might not need the oob, but we do for data vertification */
+ /* User might not need the oob, but we do for data verification */
if (!oob)
oob = &tmp_oob;
- ops.mode = ftl->smallpagenand ? MTD_OOB_RAW : MTD_OOB_PLACE;
+ ops.mode = ftl->smallpagenand ? MTD_OPS_RAW : MTD_OPS_PLACE_OOB;
ops.ooboffs = 0;
ops.ooblen = SM_OOB_SIZE;
ops.oobbuf = (void *)oob;
return ret;
}
- /* Unfortunelly, oob read will _always_ succeed,
+ /* Unfortunately, oob read will _always_ succeed,
despite card removal..... */
ret = mtd->read_oob(mtd, sm_mkoffset(ftl, zone, block, boffset), &ops);
/* Test for unknown errors */
- if (ret != 0 && ret != -EUCLEAN && ret != -EBADMSG) {
+ if (ret != 0 && !mtd_is_bitflip_or_eccerr(ret)) {
dbg("read of block %d at zone %d, failed due to error (%d)",
block, zone, ret);
goto again;
}
/* Test ECC*/
- if (ret == -EBADMSG ||
+ if (mtd_is_eccerr(ret) ||
(ftl->smallpagenand && sm_correct_sector(buffer, oob))) {
dbg("read of block %d at zone %d, failed due to ECC error",
if (ftl->unstable)
return -EIO;
- ops.mode = ftl->smallpagenand ? MTD_OOB_RAW : MTD_OOB_PLACE;
+ ops.mode = ftl->smallpagenand ? MTD_OPS_RAW : MTD_OPS_PLACE_OOB;
ops.len = SM_SECTOR_SIZE;
ops.datbuf = buffer;
ops.ooboffs = 0;
/* We aren't checking the return value, because we don't care */
/* This also fails on fake xD cards, but I guess these won't expose
- any bad blocks till fail completly */
+ any bad blocks till fail completely */
for (boffset = 0; boffset < ftl->block_size; boffset += SM_SECTOR_SIZE)
sm_write_sector(ftl, zone, block, boffset, NULL, &oob);
}
/*
* Erase a block within a zone
- * If erase succedes, it updates free block fifo, otherwise marks block as bad
+ * If erase succeeds, it updates free block fifo, otherwise marks block as bad
*/
static int sm_erase_block(struct sm_ftl *ftl, int zone_num, uint16_t block,
int put_free)
complete(&ftl->erase_completion);
}
-/* Throughtly test that block is valid. */
+/* Thoroughly test that block is valid. */
static int sm_check_block(struct sm_ftl *ftl, int zone, int block)
{
int boffset;
for (boffset = 0; boffset < ftl->block_size;
boffset += SM_SECTOR_SIZE) {
- /* This shoudn't happen anyway */
+ /* This shouldn't happen anyway */
if (sm_read_sector(ftl, zone, block, boffset, NULL, &oob))
return -2;
/* Found */
cis_sector = (int)(offset >> SECTOR_SHIFT);
} else {
- DEBUG(MTD_DEBUG_LEVEL1,
- "SSFDC_RO: CIS/IDI sector not found"
+ pr_debug("SSFDC_RO: CIS/IDI sector not found"
" on %s (mtd%d)\n", mtd->name,
mtd->index);
}
struct mtd_oob_ops ops;
int ret;
- ops.mode = MTD_OOB_RAW;
+ ops.mode = MTD_OPS_RAW;
ops.ooboffs = 0;
ops.ooblen = OOB_SIZE;
ops.oobbuf = buf;
block_address >>= 1;
if (get_parity(block_address, 10) != parity) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "SSFDC_RO: logical address field%d"
+ pr_debug("SSFDC_RO: logical address field%d"
"parity error(0x%04X)\n", j+1,
block_address);
} else {
if (!ok)
block_address = -2;
- DEBUG(MTD_DEBUG_LEVEL3, "SSFDC_RO: get_logical_address() %d\n",
+ pr_debug("SSFDC_RO: get_logical_address() %d\n",
block_address);
return block_address;
int ret, block_address, phys_block;
struct mtd_info *mtd = ssfdc->mbd.mtd;
- DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: build_block_map() nblks=%d (%luK)\n",
+ pr_debug("SSFDC_RO: build_block_map() nblks=%d (%luK)\n",
ssfdc->map_len,
(unsigned long)ssfdc->map_len * ssfdc->erase_size / 1024);
ret = read_raw_oob(mtd, offset, oob_buf);
if (ret < 0) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "SSFDC_RO: mtd read_oob() failed at %lu\n",
+ pr_debug("SSFDC_RO: mtd read_oob() failed at %lu\n",
offset);
return -1;
}
ssfdc->logic_block_map[block_address] =
(unsigned short)phys_block;
- DEBUG(MTD_DEBUG_LEVEL2,
- "SSFDC_RO: build_block_map() phys_block=%d,"
+ pr_debug("SSFDC_RO: build_block_map() phys_block=%d,"
"logic_block_addr=%d, zone=%d\n",
phys_block, block_address, zone_index);
}
return;
ssfdc = kzalloc(sizeof(struct ssfdcr_record), GFP_KERNEL);
- if (!ssfdc) {
- printk(KERN_WARNING
- "SSFDC_RO: out of memory for data structures\n");
+ if (!ssfdc)
return;
- }
ssfdc->mbd.mtd = mtd;
ssfdc->mbd.devnum = -1;
ssfdc->erase_size = mtd->erasesize;
ssfdc->map_len = (u32)mtd->size / mtd->erasesize;
- DEBUG(MTD_DEBUG_LEVEL1,
- "SSFDC_RO: cis_block=%d,erase_size=%d,map_len=%d,n_zones=%d\n",
+ pr_debug("SSFDC_RO: cis_block=%d,erase_size=%d,map_len=%d,n_zones=%d\n",
ssfdc->cis_block, ssfdc->erase_size, ssfdc->map_len,
DIV_ROUND_UP(ssfdc->map_len, MAX_PHYS_BLK_PER_ZONE));
ssfdc->cylinders = (unsigned short)(((u32)mtd->size >> SECTOR_SHIFT) /
((long)ssfdc->sectors * (long)ssfdc->heads));
- DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: using C:%d H:%d S:%d == %ld sects\n",
+ pr_debug("SSFDC_RO: using C:%d H:%d S:%d == %ld sects\n",
ssfdc->cylinders, ssfdc->heads , ssfdc->sectors,
(long)ssfdc->cylinders * (long)ssfdc->heads *
(long)ssfdc->sectors);
/* Allocate logical block map */
ssfdc->logic_block_map = kmalloc(sizeof(ssfdc->logic_block_map[0]) *
ssfdc->map_len, GFP_KERNEL);
- if (!ssfdc->logic_block_map) {
- printk(KERN_WARNING
- "SSFDC_RO: out of memory for data structures\n");
+ if (!ssfdc->logic_block_map)
goto out_err;
- }
memset(ssfdc->logic_block_map, 0xff, sizeof(ssfdc->logic_block_map[0]) *
ssfdc->map_len);
{
struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;
- DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: remove_dev (i=%d)\n", dev->devnum);
+ pr_debug("SSFDC_RO: remove_dev (i=%d)\n", dev->devnum);
del_mtd_blktrans_dev(dev);
kfree(ssfdc->logic_block_map);
offset = (int)(logic_sect_no % sectors_per_block);
block_address = (int)(logic_sect_no / sectors_per_block);
- DEBUG(MTD_DEBUG_LEVEL3,
- "SSFDC_RO: ssfdcr_readsect(%lu) sec_per_blk=%d, ofst=%d,"
+ pr_debug("SSFDC_RO: ssfdcr_readsect(%lu) sec_per_blk=%d, ofst=%d,"
" block_addr=%d\n", logic_sect_no, sectors_per_block, offset,
block_address);
block_address = ssfdc->logic_block_map[block_address];
- DEBUG(MTD_DEBUG_LEVEL3,
- "SSFDC_RO: ssfdcr_readsect() phys_block_addr=%d\n",
+ pr_debug("SSFDC_RO: ssfdcr_readsect() phys_block_addr=%d\n",
block_address);
if (block_address < 0xffff) {
sect_no = (unsigned long)block_address * sectors_per_block +
offset;
- DEBUG(MTD_DEBUG_LEVEL3,
- "SSFDC_RO: ssfdcr_readsect() phys_sect_no=%lu\n",
+ pr_debug("SSFDC_RO: ssfdcr_readsect() phys_sect_no=%lu\n",
sect_no);
if (read_physical_sector(ssfdc->mbd.mtd, buf, sect_no) < 0)
{
struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;
- DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: ssfdcr_getgeo() C=%d, H=%d, S=%d\n",
+ pr_debug("SSFDC_RO: ssfdcr_getgeo() C=%d, H=%d, S=%d\n",
ssfdc->cylinders, ssfdc->heads, ssfdc->sectors);
geo->heads = ssfdc->heads;
#define PRINT_PREF KERN_INFO "mtd_oobtest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) {
set_random_data(writebuf, use_len);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = use_len;
for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) {
set_random_data(writebuf, use_len);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = use_len;
if (use_offset != 0 || use_len < mtd->ecclayout->oobavail) {
int k;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail;
size_t len = mtd->ecclayout->oobavail * pgcnt;
set_random_data(writebuf, len);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = len;
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
addr0 += mtd->erasesize;
/* Attempt to write off end of OOB */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = 1;
}
/* Attempt to read off end of OOB */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = 1;
"block is bad\n");
else {
/* Attempt to write off end of device */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail + 1;
}
/* Attempt to read off end of device */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail + 1;
goto out;
/* Attempt to write off end of device */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail;
}
/* Attempt to read off end of device */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail;
addr = (i + 1) * mtd->erasesize - mtd->writesize;
for (pg = 0; pg < cnt; ++pg) {
set_random_data(writebuf, sz);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = sz;
continue;
set_random_data(writebuf, mtd->ecclayout->oobavail * 2);
addr = (i + 1) * mtd->erasesize - mtd->writesize;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail * 2;
#define PRINT_PREF KERN_INFO "mtd_pagetest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
for (j = 0; j < pgcnt - 1; ++j, addr += pgsize) {
/* Do a read to set the internal dataRAMs to different data */
err = mtd->read(mtd, addr0, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
return err;
}
err = mtd->read(mtd, addrn - bufsize, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
memset(twopages, 0, bufsize);
read = 0;
err = mtd->read(mtd, addr, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
unsigned long oldnext = next;
/* Do a read to set the internal dataRAMs to different data */
err = mtd->read(mtd, addr0, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
return err;
}
err = mtd->read(mtd, addrn - bufsize, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
memset(twopages, 0, bufsize);
read = 0;
err = mtd->read(mtd, addr, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
read = 0;
addr = addrn - pgsize - pgsize;
err = mtd->read(mtd, addr, pgsize, &read, pp1);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
read = 0;
addr = addrn - pgsize - pgsize - pgsize;
err = mtd->read(mtd, addr, pgsize, &read, pp1);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
addr = addr0;
printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
err = mtd->read(mtd, addr, pgsize, &read, pp2);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
addr = addrn - pgsize;
printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
err = mtd->read(mtd, addr, pgsize, &read, pp3);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
addr = addr0;
printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
err = mtd->read(mtd, addr, pgsize, &read, pp4);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
memset(readbuf, 0, pgsize);
err = mtd->read(mtd, addr0, pgsize, &read, readbuf);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
memset(readbuf, 0, pgsize);
err = mtd->read(mtd, addr0, pgsize, &read, readbuf);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
err = mtd->read(mtd, addr0, pgsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
#define PRINT_PREF KERN_INFO "mtd_readtest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
if (mtd->oobsize) {
struct mtd_oob_ops ops;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->oobsize;
ops.datbuf = NULL;
ops.oobbuf = oobbuf;
ret = mtd->read_oob(mtd, addr, &ops);
- if (ret || ops.oobretlen != mtd->oobsize) {
+ if ((ret && !mtd_is_bitflip(ret)) ||
+ ops.oobretlen != mtd->oobsize) {
printk(PRINT_PREF "error: read oob failed at "
"%#llx\n", (long long)addr);
if (!err)
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
#define PRINT_PREF KERN_INFO "mtd_speedtest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
err = mtd->read(mtd, addr, mtd->erasesize, &read, iobuf);
/* Ignore corrected ECC errors */
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != mtd->erasesize) {
printk(PRINT_PREF "error: read failed at %#llx\n", addr);
for (i = 0; i < pgcnt; i++) {
err = mtd->read(mtd, addr, pgsize, &read, buf);
/* Ignore corrected ECC errors */
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
for (i = 0; i < n; i++) {
err = mtd->read(mtd, addr, sz, &read, buf);
/* Ignore corrected ECC errors */
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != sz) {
printk(PRINT_PREF "error: read failed at %#llx\n",
if (pgcnt % 2) {
err = mtd->read(mtd, addr, pgsize, &read, buf);
/* Ignore corrected ECC errors */
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
if (count)
printk(PRINT_PREF "MTD device: %d count: %d\n", dev, count);
else
#define PRINT_PREF KERN_INFO "mtd_stresstest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
}
addr = eb * mtd->erasesize + offs;
err = mtd->read(mtd, addr, len, &read, readbuf);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (unlikely(err || read != len)) {
printk(PRINT_PREF "error: read failed at 0x%llx\n",
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
#define PRINT_PREF KERN_INFO "mtd_subpagetest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
read = 0;
err = mtd->read(mtd, addr, subpgsize, &read, readbuf);
if (unlikely(err || read != subpgsize)) {
- if (err == -EUCLEAN && read == subpgsize) {
+ if (mtd_is_bitflip(err) && read == subpgsize) {
printk(PRINT_PREF "ECC correction at %#llx\n",
(long long)addr);
err = 0;
read = 0;
err = mtd->read(mtd, addr, subpgsize, &read, readbuf);
if (unlikely(err || read != subpgsize)) {
- if (err == -EUCLEAN && read == subpgsize) {
+ if (mtd_is_bitflip(err) && read == subpgsize) {
printk(PRINT_PREF "ECC correction at %#llx\n",
(long long)addr);
err = 0;
read = 0;
err = mtd->read(mtd, addr, subpgsize * k, &read, readbuf);
if (unlikely(err || read != subpgsize * k)) {
- if (err == -EUCLEAN && read == subpgsize * k) {
+ if (mtd_is_bitflip(err) && read == subpgsize * k) {
printk(PRINT_PREF "ECC correction at %#llx\n",
(long long)addr);
err = 0;
read = 0;
err = mtd->read(mtd, addr, subpgsize, &read, readbuf);
if (unlikely(err || read != subpgsize)) {
- if (err == -EUCLEAN && read == subpgsize) {
+ if (mtd_is_bitflip(err) && read == subpgsize) {
printk(PRINT_PREF "ECC correction at %#llx\n",
(long long)addr);
err = 0;
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
module_param(pgcnt, int, S_IRUGO);
MODULE_PARM_DESC(pgcnt, "number of pages per eraseblock to torture (0 => all)");
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
retry:
err = mtd->read(mtd, addr, len, &read, check_buf);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
printk(PRINT_PREF "single bit flip occurred at EB %d "
"MTD reported that it was fixed.\n", ebnum);
else if (err) {
printk(KERN_INFO "=================================================\n");
printk(PRINT_PREF "Warning: this program is trying to wear out your "
"flash, stop it if this is not wanted.\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
printk(PRINT_PREF "torture %d eraseblocks (%d-%d) of mtd%d\n",
ebcnt, eb, eb + ebcnt - 1, dev);
if (err == UBI_IO_BITFLIPS) {
scrub = 1;
err = 0;
- } else if (err == -EBADMSG) {
+ } else if (mtd_is_eccerr(err)) {
if (vol->vol_type == UBI_DYNAMIC_VOLUME)
goto out_unlock;
scrub = 1;
retry:
err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf);
if (err) {
- const char *errstr = (err == -EBADMSG) ? " (ECC error)" : "";
+ const char *errstr = mtd_is_eccerr(err) ? " (ECC error)" : "";
- if (err == -EUCLEAN) {
+ if (mtd_is_bitflip(err)) {
/*
* -EUCLEAN is reported if there was a bit-flip which
* was corrected, so this is harmless.
* all the requested data. But some buggy drivers might do
* this, so we change it to -EIO.
*/
- if (read != len && err == -EBADMSG) {
+ if (read != len && mtd_is_eccerr(err)) {
ubi_assert(0);
err = -EIO;
}
out:
mutex_unlock(&ubi->buf_mutex);
- if (err == UBI_IO_BITFLIPS || err == -EBADMSG) {
+ if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err)) {
/*
* If a bit-flip or data integrity error was detected, the test
* has not passed because it happened on a freshly erased
read_err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
if (read_err) {
- if (read_err != UBI_IO_BITFLIPS && read_err != -EBADMSG)
+ if (read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err))
return read_err;
/*
magic = be32_to_cpu(ec_hdr->magic);
if (magic != UBI_EC_HDR_MAGIC) {
- if (read_err == -EBADMSG)
+ if (mtd_is_eccerr(read_err))
return UBI_IO_BAD_HDR_EBADMSG;
/*
p = (char *)vid_hdr - ubi->vid_hdr_shift;
read_err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
ubi->vid_hdr_alsize);
- if (read_err && read_err != UBI_IO_BITFLIPS && read_err != -EBADMSG)
+ if (read_err && read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err))
return read_err;
magic = be32_to_cpu(vid_hdr->magic);
if (magic != UBI_VID_HDR_MAGIC) {
- if (read_err == -EBADMSG)
+ if (mtd_is_eccerr(read_err))
return UBI_IO_BAD_HDR_EBADMSG;
if (ubi_check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
return -ENOMEM;
err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
- if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+ if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
goto exit;
crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
p = (char *)vid_hdr - ubi->vid_hdr_shift;
err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
ubi->vid_hdr_alsize);
- if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+ if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
goto exit;
crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_EC_HDR_SIZE_CRC);
}
err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf1);
- if (err && err != -EUCLEAN)
+ if (err && !mtd_is_bitflip(err))
goto out_free;
for (i = 0; i < len; i++) {
}
err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf);
- if (err && err != -EUCLEAN) {
+ if (err && !mtd_is_bitflip(err)) {
ubi_err("error %d while reading %d bytes from PEB %d:%d, "
"read %zd bytes", err, len, pnum, offset, read);
goto error;
return 0;
err = ubi_eba_read_leb(ubi, vol, lnum, buf, offset, len, check);
- if (err && err == -EBADMSG && vol->vol_type == UBI_STATIC_VOLUME) {
+ if (err && mtd_is_eccerr(err) && vol->vol_type == UBI_STATIC_VOLUME) {
ubi_warn("mark volume %d as corrupted", vol_id);
vol->corrupted = 1;
}
err = ubi_eba_read_leb(ubi, vol, i, buf, 0, size, 1);
if (err) {
- if (err == -EBADMSG)
+ if (mtd_is_eccerr(err))
err = 1;
break;
}
}
err = ubi_io_read_data(ubi, buf, pnum, 0, len);
- if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+ if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
goto out_free_buf;
data_crc = be32_to_cpu(vid_hdr->data_crc);
err = ubi_io_read(ubi, ubi->peb_buf1, pnum, ubi->leb_start,
ubi->leb_size);
- if (err == UBI_IO_BITFLIPS || err == -EBADMSG) {
+ if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err)) {
/*
* Bit-flips or integrity errors while reading the data area.
* It is difficult to say for sure what type of corruption is
err = ubi_io_read_data(ubi, leb[seb->lnum], seb->pnum, 0,
ubi->vtbl_size);
- if (err == UBI_IO_BITFLIPS || err == -EBADMSG)
+ if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err))
/*
* Scrub the PEB later. Note, -EBADMSG indicates an
* uncorrectable ECC error, but we have our own CRC and
struct mtd_oob_ops ops;
int ret;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.datbuf = read_data;
ops.len = DeviceInfo.wPageDataSize;
ops.oobbuf = read_data + DeviceInfo.wPageDataSize + BTSIG_OFFSET;
struct mtd_oob_ops ops;
int ret;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.datbuf = write_data;
ops.len = DeviceInfo.wPageDataSize;
ops.oobbuf = write_data + DeviceInfo.wPageDataSize + BTSIG_OFFSET;
struct mtd_oob_ops ops;
int ret;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.datbuf = NULL;
ops.len = 0;
ops.oobbuf = read_data;
}
static struct cifsLockInfo *
-cifs_lock_init(__u64 len, __u64 offset, __u8 type, __u16 netfid)
+cifs_lock_init(__u64 offset, __u64 length, __u8 type, __u16 netfid)
{
- struct cifsLockInfo *li =
+ struct cifsLockInfo *lock =
kmalloc(sizeof(struct cifsLockInfo), GFP_KERNEL);
- if (!li)
- return li;
- li->netfid = netfid;
- li->offset = offset;
- li->length = len;
- li->type = type;
- li->pid = current->tgid;
- INIT_LIST_HEAD(&li->blist);
- init_waitqueue_head(&li->block_q);
- return li;
+ if (!lock)
+ return lock;
+ lock->offset = offset;
+ lock->length = length;
+ lock->type = type;
+ lock->netfid = netfid;
+ lock->pid = current->tgid;
+ INIT_LIST_HEAD(&lock->blist);
+ init_waitqueue_head(&lock->block_q);
+ return lock;
}
static void
}
static bool
-cifs_find_lock_conflict(struct cifsInodeInfo *cinode, __u64 offset,
+__cifs_find_lock_conflict(struct cifsInodeInfo *cinode, __u64 offset,
__u64 length, __u8 type, __u16 netfid,
struct cifsLockInfo **conf_lock)
{
return false;
}
+static bool
+cifs_find_lock_conflict(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock,
+ struct cifsLockInfo **conf_lock)
+{
+ return __cifs_find_lock_conflict(cinode, lock->offset, lock->length,
+ lock->type, lock->netfid, conf_lock);
+}
+
static int
cifs_lock_test(struct cifsInodeInfo *cinode, __u64 offset, __u64 length,
__u8 type, __u16 netfid, struct file_lock *flock)
mutex_lock(&cinode->lock_mutex);
- exist = cifs_find_lock_conflict(cinode, offset, length, type, netfid,
- &conf_lock);
+ exist = __cifs_find_lock_conflict(cinode, offset, length, type, netfid,
+ &conf_lock);
if (exist) {
flock->fl_start = conf_lock->offset;
flock->fl_end = conf_lock->offset + conf_lock->length - 1;
return rc;
}
-static int
-cifs_lock_add(struct cifsInodeInfo *cinode, __u64 len, __u64 offset,
- __u8 type, __u16 netfid)
+static void
+cifs_lock_add(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock)
{
- struct cifsLockInfo *li;
-
- li = cifs_lock_init(len, offset, type, netfid);
- if (!li)
- return -ENOMEM;
-
mutex_lock(&cinode->lock_mutex);
- list_add_tail(&li->llist, &cinode->llist);
+ list_add_tail(&lock->llist, &cinode->llist);
mutex_unlock(&cinode->lock_mutex);
- return 0;
}
static int
-cifs_lock_add_if(struct cifsInodeInfo *cinode, __u64 offset, __u64 length,
- __u8 type, __u16 netfid, bool wait)
+cifs_lock_add_if(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock,
+ bool wait)
{
- struct cifsLockInfo *lock, *conf_lock;
+ struct cifsLockInfo *conf_lock;
bool exist;
int rc = 0;
- lock = cifs_lock_init(length, offset, type, netfid);
- if (!lock)
- return -ENOMEM;
-
try_again:
exist = false;
mutex_lock(&cinode->lock_mutex);
- exist = cifs_find_lock_conflict(cinode, offset, length, type, netfid,
- &conf_lock);
+ exist = cifs_find_lock_conflict(cinode, lock, &conf_lock);
if (!exist && cinode->can_cache_brlcks) {
list_add_tail(&lock->llist, &cinode->llist);
mutex_unlock(&cinode->lock_mutex);
(lock->blist.next == &lock->blist));
if (!rc)
goto try_again;
- else {
- mutex_lock(&cinode->lock_mutex);
- list_del_init(&lock->blist);
- }
+ mutex_lock(&cinode->lock_mutex);
+ list_del_init(&lock->blist);
}
- kfree(lock);
mutex_unlock(&cinode->lock_mutex);
return rc;
}
else
type = CIFS_WRLCK;
- lck = cifs_lock_init(length, flock->fl_start, type,
+ lck = cifs_lock_init(flock->fl_start, length, type,
cfile->netfid);
if (!lck) {
rc = -ENOMEM;
if (rc != 0)
cERROR(1, "Error unlocking previously locked "
"range %d during test of lock", rc);
- rc = 0;
- return rc;
+ return 0;
}
if (type & LOCKING_ANDX_SHARED_LOCK) {
flock->fl_type = F_WRLCK;
- rc = 0;
- return rc;
+ return 0;
}
rc = CIFSSMBLock(xid, tcon, netfid, current->tgid, length,
} else
flock->fl_type = F_WRLCK;
- rc = 0;
- return rc;
+ return 0;
}
static void
}
if (lock) {
- rc = cifs_lock_add_if(cinode, flock->fl_start, length,
- type, netfid, wait_flag);
+ struct cifsLockInfo *lock;
+
+ lock = cifs_lock_init(flock->fl_start, length, type, netfid);
+ if (!lock)
+ return -ENOMEM;
+
+ rc = cifs_lock_add_if(cinode, lock, wait_flag);
if (rc < 0)
- return rc;
- else if (!rc)
+ kfree(lock);
+ if (rc <= 0)
goto out;
rc = CIFSSMBLock(xid, tcon, netfid, current->tgid, length,
flock->fl_start, 0, 1, type, wait_flag, 0);
- if (rc == 0) {
- /* For Windows locks we must store them. */
- rc = cifs_lock_add(cinode, length, flock->fl_start,
- type, netfid);
+ if (rc) {
+ kfree(lock);
+ goto out;
}
+
+ cifs_lock_add(cinode, lock);
} else if (unlock)
rc = cifs_unlock_range(cfile, flock, xid);
return 0;
}
+/*
+ * jffs2_selected_compress:
+ * @compr: Explicit compression type to use (ie, JFFS2_COMPR_ZLIB).
+ * If 0, just take the first available compression mode.
+ * @data_in: Pointer to uncompressed data
+ * @cpage_out: Pointer to returned pointer to buffer for compressed data
+ * @datalen: On entry, holds the amount of data available for compression.
+ * On exit, expected to hold the amount of data actually compressed.
+ * @cdatalen: On entry, holds the amount of space available for compressed
+ * data. On exit, expected to hold the actual size of the compressed
+ * data.
+ *
+ * Returns: the compression type used. Zero is used to show that the data
+ * could not be compressed; probably because we couldn't find the requested
+ * compression mode.
+ */
+static int jffs2_selected_compress(u8 compr, unsigned char *data_in,
+ unsigned char **cpage_out, u32 *datalen, u32 *cdatalen)
+{
+ struct jffs2_compressor *this;
+ int err, ret = JFFS2_COMPR_NONE;
+ uint32_t orig_slen, orig_dlen;
+ char *output_buf;
+
+ output_buf = kmalloc(*cdatalen, GFP_KERNEL);
+ if (!output_buf) {
+ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
+ return ret;
+ }
+ orig_slen = *datalen;
+ orig_dlen = *cdatalen;
+ spin_lock(&jffs2_compressor_list_lock);
+ list_for_each_entry(this, &jffs2_compressor_list, list) {
+ /* Skip decompress-only and disabled modules */
+ if (!this->compress || this->disabled)
+ continue;
+
+ /* Skip if not the desired compression type */
+ if (compr && (compr != this->compr))
+ continue;
+
+ /*
+ * Either compression type was unspecified, or we found our
+ * compressor; either way, we're good to go.
+ */
+ this->usecount++;
+ spin_unlock(&jffs2_compressor_list_lock);
+
+ *datalen = orig_slen;
+ *cdatalen = orig_dlen;
+ err = this->compress(data_in, output_buf, datalen, cdatalen);
+
+ spin_lock(&jffs2_compressor_list_lock);
+ this->usecount--;
+ if (!err) {
+ /* Success */
+ ret = this->compr;
+ this->stat_compr_blocks++;
+ this->stat_compr_orig_size += *datalen;
+ this->stat_compr_new_size += *cdatalen;
+ break;
+ }
+ }
+ spin_unlock(&jffs2_compressor_list_lock);
+ if (ret == JFFS2_COMPR_NONE)
+ kfree(output_buf);
+ else
+ *cpage_out = output_buf;
+
+ return ret;
+}
+
/* jffs2_compress:
* @data_in: Pointer to uncompressed data
* @cpage_out: Pointer to returned pointer to buffer for compressed data
uint32_t *datalen, uint32_t *cdatalen)
{
int ret = JFFS2_COMPR_NONE;
- int compr_ret;
+ int mode, compr_ret;
struct jffs2_compressor *this, *best=NULL;
unsigned char *output_buf = NULL, *tmp_buf;
uint32_t orig_slen, orig_dlen;
uint32_t best_slen=0, best_dlen=0;
- switch (jffs2_compression_mode) {
+ if (c->mount_opts.override_compr)
+ mode = c->mount_opts.compr;
+ else
+ mode = jffs2_compression_mode;
+
+ switch (mode) {
case JFFS2_COMPR_MODE_NONE:
break;
case JFFS2_COMPR_MODE_PRIORITY:
- output_buf = kmalloc(*cdatalen,GFP_KERNEL);
- if (!output_buf) {
- printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
- goto out;
- }
- orig_slen = *datalen;
- orig_dlen = *cdatalen;
- spin_lock(&jffs2_compressor_list_lock);
- list_for_each_entry(this, &jffs2_compressor_list, list) {
- /* Skip decompress-only backwards-compatibility and disabled modules */
- if ((!this->compress)||(this->disabled))
- continue;
-
- this->usecount++;
- spin_unlock(&jffs2_compressor_list_lock);
- *datalen = orig_slen;
- *cdatalen = orig_dlen;
- compr_ret = this->compress(data_in, output_buf, datalen, cdatalen);
- spin_lock(&jffs2_compressor_list_lock);
- this->usecount--;
- if (!compr_ret) {
- ret = this->compr;
- this->stat_compr_blocks++;
- this->stat_compr_orig_size += *datalen;
- this->stat_compr_new_size += *cdatalen;
- break;
- }
- }
- spin_unlock(&jffs2_compressor_list_lock);
- if (ret == JFFS2_COMPR_NONE)
- kfree(output_buf);
+ ret = jffs2_selected_compress(0, data_in, cpage_out, datalen,
+ cdatalen);
break;
case JFFS2_COMPR_MODE_SIZE:
case JFFS2_COMPR_MODE_FAVOURLZO:
best->stat_compr_orig_size += best_slen;
best->stat_compr_new_size += best_dlen;
ret = best->compr;
+ *cpage_out = output_buf;
}
spin_unlock(&jffs2_compressor_list_lock);
break;
+ case JFFS2_COMPR_MODE_FORCELZO:
+ ret = jffs2_selected_compress(JFFS2_COMPR_LZO, data_in,
+ cpage_out, datalen, cdatalen);
+ break;
+ case JFFS2_COMPR_MODE_FORCEZLIB:
+ ret = jffs2_selected_compress(JFFS2_COMPR_ZLIB, data_in,
+ cpage_out, datalen, cdatalen);
+ break;
default:
printk(KERN_ERR "JFFS2: unknown compression mode.\n");
}
- out:
+
if (ret == JFFS2_COMPR_NONE) {
*cpage_out = data_in;
*datalen = *cdatalen;
none_stat_compr_blocks++;
none_stat_compr_size += *datalen;
}
- else {
- *cpage_out = output_buf;
- }
return ret;
}
#define JFFS2_COMPR_MODE_PRIORITY 1
#define JFFS2_COMPR_MODE_SIZE 2
#define JFFS2_COMPR_MODE_FAVOURLZO 3
+#define JFFS2_COMPR_MODE_FORCELZO 4
+#define JFFS2_COMPR_MODE_FORCEZLIB 5
#define FAVOUR_LZO_PERCENT 80
jffs2_do_setattr(inode, &iattr);
}
-int jffs2_remount_fs (struct super_block *sb, int *flags, char *data)
+int jffs2_do_remount_fs(struct super_block *sb, int *flags, char *data)
{
struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
struct jffs2_inodirty;
+struct jffs2_mount_opts {
+ bool override_compr;
+ unsigned int compr;
+};
+
/* A struct for the overall file system control. Pointers to
jffs2_sb_info structs are named `c' in the source code.
Nee jffs_control
#endif
struct jffs2_summary *summary; /* Summary information */
+ struct jffs2_mount_opts mount_opts;
#ifdef CONFIG_JFFS2_FS_XATTR
#define XATTRINDEX_HASHSIZE (57)
struct inode *jffs2_new_inode (struct inode *dir_i, umode_t mode,
struct jffs2_raw_inode *ri);
int jffs2_statfs (struct dentry *, struct kstatfs *);
-int jffs2_remount_fs (struct super_block *, int *, char *);
+int jffs2_do_remount_fs(struct super_block *, int *, char *);
int jffs2_do_fill_super(struct super_block *sb, void *data, int silent);
void jffs2_gc_release_inode(struct jffs2_sb_info *c,
struct jffs2_inode_info *f);
else
c->mtd->unpoint(c->mtd, 0, c->mtd->size);
#endif
- if (s)
- kfree(s);
-
+ kfree(s);
return ret;
}
#include <linux/fs.h>
#include <linux/err.h>
#include <linux/mount.h>
+#include <linux/parser.h>
#include <linux/jffs2.h>
#include <linux/pagemap.h>
#include <linux/mtd/super.h>
#include <linux/ctype.h>
#include <linux/namei.h>
+#include <linux/seq_file.h>
#include <linux/exportfs.h>
#include "compr.h"
#include "nodelist.h"
unlock_super(sb);
}
+static const char *jffs2_compr_name(unsigned int compr)
+{
+ switch (compr) {
+ case JFFS2_COMPR_MODE_NONE:
+ return "none";
+#ifdef CONFIG_JFFS2_LZO
+ case JFFS2_COMPR_MODE_FORCELZO:
+ return "lzo";
+#endif
+#ifdef CONFIG_JFFS2_ZLIB
+ case JFFS2_COMPR_MODE_FORCEZLIB:
+ return "zlib";
+#endif
+ default:
+ /* should never happen; programmer error */
+ WARN_ON(1);
+ return "";
+ }
+}
+
+static int jffs2_show_options(struct seq_file *s, struct vfsmount *mnt)
+{
+ struct jffs2_sb_info *c = JFFS2_SB_INFO(mnt->mnt_sb);
+ struct jffs2_mount_opts *opts = &c->mount_opts;
+
+ if (opts->override_compr)
+ seq_printf(s, ",compr=%s", jffs2_compr_name(opts->compr));
+
+ return 0;
+}
+
static int jffs2_sync_fs(struct super_block *sb, int wait)
{
struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
.fh_to_parent = jffs2_fh_to_parent,
};
+/*
+ * JFFS2 mount options.
+ *
+ * Opt_override_compr: override default compressor
+ * Opt_err: just end of array marker
+ */
+enum {
+ Opt_override_compr,
+ Opt_err,
+};
+
+static const match_table_t tokens = {
+ {Opt_override_compr, "compr=%s"},
+ {Opt_err, NULL},
+};
+
+static int jffs2_parse_options(struct jffs2_sb_info *c, char *data)
+{
+ substring_t args[MAX_OPT_ARGS];
+ char *p, *name;
+
+ if (!data)
+ return 0;
+
+ while ((p = strsep(&data, ","))) {
+ int token;
+
+ if (!*p)
+ continue;
+
+ token = match_token(p, tokens, args);
+ switch (token) {
+ case Opt_override_compr:
+ name = match_strdup(&args[0]);
+
+ if (!name)
+ return -ENOMEM;
+ if (!strcmp(name, "none"))
+ c->mount_opts.compr = JFFS2_COMPR_MODE_NONE;
+#ifdef CONFIG_JFFS2_LZO
+ else if (!strcmp(name, "lzo"))
+ c->mount_opts.compr = JFFS2_COMPR_MODE_FORCELZO;
+#endif
+#ifdef CONFIG_JFFS2_ZLIB
+ else if (!strcmp(name, "zlib"))
+ c->mount_opts.compr =
+ JFFS2_COMPR_MODE_FORCEZLIB;
+#endif
+ else {
+ printk(KERN_ERR "JFFS2 Error: unknown compressor \"%s\"",
+ name);
+ kfree(name);
+ return -EINVAL;
+ }
+ kfree(name);
+ c->mount_opts.override_compr = true;
+ break;
+ default:
+ printk(KERN_ERR "JFFS2 Error: unrecognized mount option '%s' or missing value\n",
+ p);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static int jffs2_remount_fs(struct super_block *sb, int *flags, char *data)
+{
+ struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
+ int err;
+
+ err = jffs2_parse_options(c, data);
+ if (err)
+ return -EINVAL;
+
+ return jffs2_do_remount_fs(sb, flags, data);
+}
+
static const struct super_operations jffs2_super_operations =
{
.alloc_inode = jffs2_alloc_inode,
.remount_fs = jffs2_remount_fs,
.evict_inode = jffs2_evict_inode,
.dirty_inode = jffs2_dirty_inode,
+ .show_options = jffs2_show_options,
.sync_fs = jffs2_sync_fs,
};
c->os_priv = sb;
sb->s_fs_info = c;
+ ret = jffs2_parse_options(c, data);
+ if (ret) {
+ kfree(c);
+ return -EINVAL;
+ }
+
/* Initialize JFFS2 superblock locks, the further initialization will
* be done later */
mutex_init(&c->alloc_sem);
if (!jffs2_is_writebuffered(c))
return 0;
- if (mutex_trylock(&c->alloc_sem)) {
- mutex_unlock(&c->alloc_sem);
+ if (!mutex_is_locked(&c->alloc_sem)) {
printk(KERN_CRIT "jffs2_flush_wbuf() called with alloc_sem not locked!\n");
BUG();
}
int cmlen = min_t(int, c->oobavail, OOB_CM_SIZE);
struct mtd_oob_ops ops;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.ooblen = NR_OOB_SCAN_PAGES * c->oobavail;
ops.oobbuf = c->oobbuf;
ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
struct mtd_oob_ops ops;
int ret, cmlen = min_t(int, c->oobavail, OOB_CM_SIZE);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.ooblen = cmlen;
ops.oobbuf = c->oobbuf;
ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
struct mtd_oob_ops ops;
int cmlen = min_t(int, c->oobavail, OOB_CM_SIZE);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.ooblen = cmlen;
ops.oobbuf = (uint8_t *)&oob_cleanmarker;
ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
spin_unlock(&dbg_lock);
}
+void dbg_dump_sleb(const struct ubifs_info *c,
+ const struct ubifs_scan_leb *sleb, int offs)
+{
+ struct ubifs_scan_node *snod;
+
+ printk(KERN_DEBUG "(pid %d) start dumping scanned data from LEB %d:%d\n",
+ current->pid, sleb->lnum, offs);
+
+ list_for_each_entry(snod, &sleb->nodes, list) {
+ cond_resched();
+ printk(KERN_DEBUG "Dumping node at LEB %d:%d len %d\n", sleb->lnum,
+ snod->offs, snod->len);
+ dbg_dump_node(c, snod->node);
+ }
+}
+
void dbg_dump_leb(const struct ubifs_info *c, int lnum)
{
struct ubifs_scan_leb *sleb;
void dbg_dump_lprops(struct ubifs_info *c);
void dbg_dump_lpt_info(struct ubifs_info *c);
void dbg_dump_leb(const struct ubifs_info *c, int lnum);
+void dbg_dump_sleb(const struct ubifs_info *c,
+ const struct ubifs_scan_leb *sleb, int offs);
void dbg_dump_znode(const struct ubifs_info *c,
const struct ubifs_znode *znode);
void dbg_dump_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat);
static inline void dbg_dump_leb(const struct ubifs_info *c,
int lnum) { return; }
static inline void
+dbg_dump_sleb(const struct ubifs_info *c,
+ const struct ubifs_scan_leb *sleb, int offs) { return; }
+static inline void
dbg_dump_znode(const struct ubifs_info *c,
const struct ubifs_znode *znode) { return; }
static inline void dbg_dump_heap(struct ubifs_info *c,
}
/**
- * clean_an_unclean_leb - read and write a LEB to remove corruption.
+ * clean_an_unclean_leb - read and write a LEB to remove corruption.
* @c: UBIFS file-system description object
* @ucleb: unclean LEB information
* @sbuf: LEB-sized buffer to use
mst->total_dirty = cpu_to_le64(tmp64);
/* The indexing LEB does not contribute to dark space */
- tmp64 = (c->main_lebs - 1) * c->dark_wm;
+ tmp64 = ((long long)(c->main_lebs - 1) * c->dark_wm);
mst->total_dark = cpu_to_le64(tmp64);
mst->total_used = cpu_to_le64(UBIFS_INO_NODE_SZ);
#define NAND_BBT_VERSION 0x00000100
/* Create a bbt if none exists */
#define NAND_BBT_CREATE 0x00000200
+/*
+ * Create an empty BBT with no vendor information. Vendor's information may be
+ * unavailable, for example, if the NAND controller has a different data and OOB
+ * layout or if this information is already purged. Must be used in conjunction
+ * with NAND_BBT_CREATE.
+ */
+#define NAND_BBT_CREATE_EMPTY 0x00000400
/* Search good / bad pattern through all pages of a block */
-#define NAND_BBT_SCANALLPAGES 0x00000400
+#define NAND_BBT_SCANALLPAGES 0x00000800
/* Scan block empty during good / bad block scan */
-#define NAND_BBT_SCANEMPTY 0x00000800
+#define NAND_BBT_SCANEMPTY 0x00001000
/* Write bbt if neccecary */
-#define NAND_BBT_WRITE 0x00001000
+#define NAND_BBT_WRITE 0x00002000
/* Read and write back block contents when writing bbt */
-#define NAND_BBT_SAVECONTENT 0x00002000
+#define NAND_BBT_SAVECONTENT 0x00004000
/* Search good / bad pattern on the first and the second page */
-#define NAND_BBT_SCAN2NDPAGE 0x00004000
+#define NAND_BBT_SCAN2NDPAGE 0x00008000
/* Search good / bad pattern on the last page of the eraseblock */
-#define NAND_BBT_SCANLASTPAGE 0x00008000
-/* Chip stores bad block marker on BOTH 1st and 6th bytes of OOB */
-#define NAND_BBT_SCANBYTE1AND6 0x00100000
-/* The nand_bbt_descr was created dynamicaly and must be freed */
-#define NAND_BBT_DYNAMICSTRUCT 0x00200000
-/* The bad block table does not OOB for marker */
-#define NAND_BBT_NO_OOB 0x00400000
+#define NAND_BBT_SCANLASTPAGE 0x00010000
+/*
+ * Use a flash based bad block table. By default, OOB identifier is saved in
+ * OOB area. This option is passed to the default bad block table function.
+ */
+#define NAND_BBT_USE_FLASH 0x00020000
+/* Do not store flash based bad block table in OOB area; store it in-band */
+#define NAND_BBT_NO_OOB 0x00040000
+
+/*
+ * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
+ * was allocated dynamicaly and must be freed in nand_release(). Has no meaning
+ * in nand_chip.bbt_options.
+ */
+#define NAND_BBT_DYNAMICSTRUCT 0x80000000
/* The maximum number of blocks to scan for a bbt */
#define NAND_BBT_SCAN_MAXBLOCKS 4
#define MTD_CHAR_MAJOR 90
#define MTD_BLOCK_MAJOR 31
-#define MTD_ERASE_PENDING 0x01
+#define MTD_ERASE_PENDING 0x01
#define MTD_ERASING 0x02
#define MTD_ERASE_SUSPEND 0x04
-#define MTD_ERASE_DONE 0x08
-#define MTD_ERASE_FAILED 0x10
+#define MTD_ERASE_DONE 0x08
+#define MTD_ERASE_FAILED 0x10
#define MTD_FAIL_ADDR_UNKNOWN -1LL
-/* If the erase fails, fail_addr might indicate exactly which block failed. If
- fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level or was not
- specific to any particular block. */
+/*
+ * If the erase fails, fail_addr might indicate exactly which block failed. If
+ * fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level
+ * or was not specific to any particular block.
+ */
struct erase_info {
struct mtd_info *mtd;
uint64_t addr;
};
struct mtd_erase_region_info {
- uint64_t offset; /* At which this region starts, from the beginning of the MTD */
+ uint64_t offset; /* At which this region starts, from the beginning of the MTD */
uint32_t erasesize; /* For this region */
uint32_t numblocks; /* Number of blocks of erasesize in this region */
unsigned long *lockmap; /* If keeping bitmap of locks */
};
-/*
- * oob operation modes
- *
- * MTD_OOB_PLACE: oob data are placed at the given offset
- * MTD_OOB_AUTO: oob data are automatically placed at the free areas
- * which are defined by the ecclayout
- * MTD_OOB_RAW: mode to read oob and data without doing ECC checking
- */
-typedef enum {
- MTD_OOB_PLACE,
- MTD_OOB_AUTO,
- MTD_OOB_RAW,
-} mtd_oob_mode_t;
-
/**
* struct mtd_oob_ops - oob operation operands
* @mode: operation mode
* @ooblen: number of oob bytes to write/read
* @oobretlen: number of oob bytes written/read
* @ooboffs: offset of oob data in the oob area (only relevant when
- * mode = MTD_OOB_PLACE)
+ * mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW)
* @datbuf: data buffer - if NULL only oob data are read/written
* @oobbuf: oob data buffer
*
* OOB area.
*/
struct mtd_oob_ops {
- mtd_oob_mode_t mode;
+ unsigned int mode;
size_t len;
size_t retlen;
size_t ooblen;
const char *name;
int index;
- /* ecc layout structure pointer - read only ! */
+ /* ECC layout structure pointer - read only! */
struct nand_ecclayout *ecclayout;
/* Data for variable erase regions. If numeraseregions is zero,
/* Kernel-side ioctl definitions */
struct mtd_partition;
-
-extern int mtd_device_register(struct mtd_info *master,
- const struct mtd_partition *parts,
- int nr_parts);
+struct mtd_part_parser_data;
+
+extern int mtd_device_parse_register(struct mtd_info *mtd,
+ const char **part_probe_types,
+ struct mtd_part_parser_data *parser_data,
+ const struct mtd_partition *defparts,
+ int defnr_parts);
+#define mtd_device_register(master, parts, nr_parts) \
+ mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
extern int mtd_device_unregister(struct mtd_info *master);
extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
extern int __get_mtd_device(struct mtd_info *mtd);
void mtd_erase_callback(struct erase_info *instr);
-/*
- * Debugging macro and defines
- */
-#define MTD_DEBUG_LEVEL0 (0) /* Quiet */
-#define MTD_DEBUG_LEVEL1 (1) /* Audible */
-#define MTD_DEBUG_LEVEL2 (2) /* Loud */
-#define MTD_DEBUG_LEVEL3 (3) /* Noisy */
-
-#ifdef CONFIG_MTD_DEBUG
-#define DEBUG(n, args...) \
- do { \
- if (n <= CONFIG_MTD_DEBUG_VERBOSE) \
- printk(KERN_INFO args); \
- } while(0)
-#else /* CONFIG_MTD_DEBUG */
-#define DEBUG(n, args...) \
- do { \
- if (0) \
- printk(KERN_INFO args); \
- } while(0)
-
-#endif /* CONFIG_MTD_DEBUG */
+static inline int mtd_is_bitflip(int err) {
+ return err == -EUCLEAN;
+}
+
+static inline int mtd_is_eccerr(int err) {
+ return err == -EBADMSG;
+}
+
+static inline int mtd_is_bitflip_or_eccerr(int err) {
+ return mtd_is_bitflip(err) || mtd_is_eccerr(err);
+}
#endif /* __MTD_MTD_H__ */
/* Internal helper for board drivers which need to override command function */
extern void nand_wait_ready(struct mtd_info *mtd);
-/* locks all blockes present in the device */
+/* locks all blocks present in the device */
extern int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
-/* unlocks specified locked blockes */
+/* unlocks specified locked blocks */
extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
/* The maximum number of NAND chips in an array */
#define NAND_ECC_READ 0
/* Reset Hardware ECC for write */
#define NAND_ECC_WRITE 1
-/* Enable Hardware ECC before syndrom is read back from flash */
+/* Enable Hardware ECC before syndrome is read back from flash */
#define NAND_ECC_READSYN 2
/* Bit mask for flags passed to do_nand_read_ecc */
*/
/* Chip can not auto increment pages */
#define NAND_NO_AUTOINCR 0x00000001
-/* Buswitdh is 16 bit */
+/* Buswidth is 16 bit */
#define NAND_BUSWIDTH_16 0x00000002
/* Device supports partial programming without padding */
#define NAND_NO_PADDING 0x00000004
#define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR)
/* Non chip related options */
-/*
- * Use a flash based bad block table. OOB identifier is saved in OOB area.
- * This option is passed to the default bad block table function.
- */
-#define NAND_USE_FLASH_BBT 0x00010000
/* This option skips the bbt scan during initialization. */
-#define NAND_SKIP_BBTSCAN 0x00020000
+#define NAND_SKIP_BBTSCAN 0x00010000
/*
* This option is defined if the board driver allocates its own buffers
* (e.g. because it needs them DMA-coherent).
*/
-#define NAND_OWN_BUFFERS 0x00040000
+#define NAND_OWN_BUFFERS 0x00020000
/* Chip may not exist, so silence any errors in scan */
-#define NAND_SCAN_SILENT_NODEV 0x00080000
-/*
- * If passed additionally to NAND_USE_FLASH_BBT then BBT code will not touch
- * the OOB area.
- */
-#define NAND_USE_FLASH_BBT_NO_OOB 0x00800000
-/* Create an empty BBT with no vendor information if the BBT is available */
-#define NAND_CREATE_EMPTY_BBT 0x01000000
+#define NAND_SCAN_SILENT_NODEV 0x00040000
/* Options set by nand scan */
/* Nand scan has allocated controller struct */
};
/**
- * struct nand_ecc_ctrl - Control structure for ecc
- * @mode: ecc mode
- * @steps: number of ecc steps per page
- * @size: data bytes per ecc step
- * @bytes: ecc bytes per step
- * @total: total number of ecc bytes per page
- * @prepad: padding information for syndrome based ecc generators
- * @postpad: padding information for syndrome based ecc generators
+ * struct nand_ecc_ctrl - Control structure for ECC
+ * @mode: ECC mode
+ * @steps: number of ECC steps per page
+ * @size: data bytes per ECC step
+ * @bytes: ECC bytes per step
+ * @total: total number of ECC bytes per page
+ * @prepad: padding information for syndrome based ECC generators
+ * @postpad: padding information for syndrome based ECC generators
* @layout: ECC layout control struct pointer
- * @priv: pointer to private ecc control data
- * @hwctl: function to control hardware ecc generator. Must only
+ * @priv: pointer to private ECC control data
+ * @hwctl: function to control hardware ECC generator. Must only
* be provided if an hardware ECC is available
- * @calculate: function for ecc calculation or readback from ecc hardware
- * @correct: function for ecc correction, matching to ecc generator (sw/hw)
+ * @calculate: function for ECC calculation or readback from ECC hardware
+ * @correct: function for ECC correction, matching to ECC generator (sw/hw)
* @read_page_raw: function to read a raw page without ECC
* @write_page_raw: function to write a raw page without ECC
- * @read_page: function to read a page according to the ecc generator
+ * @read_page: function to read a page according to the ECC generator
* requirements.
* @read_subpage: function to read parts of the page covered by ECC.
- * @write_page: function to write a page according to the ecc generator
+ * @write_page: function to write a page according to the ECC generator
* requirements.
+ * @write_oob_raw: function to write chip OOB data without ECC
+ * @read_oob_raw: function to read chip OOB data without ECC
* @read_oob: function to read chip OOB data
* @write_oob: function to write chip OOB data
*/
uint32_t offs, uint32_t len, uint8_t *buf);
void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf);
+ int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page);
+ int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd);
int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page,
int sndcmd);
int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
/**
* struct nand_buffers - buffer structure for read/write
- * @ecccalc: buffer for calculated ecc
- * @ecccode: buffer for ecc read from flash
+ * @ecccalc: buffer for calculated ECC
+ * @ecccode: buffer for ECC read from flash
* @databuf: buffer for data - dynamically sized
*
* Do not change the order of buffers. databuf and oobrbuf must be in
* mtd->oobsize, mtd->writesize and so on.
* @id_data contains the 8 bytes values of NAND_CMD_READID.
* Return with the bus width.
- * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing
+ * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accessing
* device ready/busy line. If set to NULL no access to
* ready/busy is available and the ready/busy information
* is read from the chip status register.
* commands to the chip.
* @waitfunc: [REPLACEABLE] hardwarespecific function for wait on
* ready.
- * @ecc: [BOARDSPECIFIC] ecc control ctructure
+ * @ecc: [BOARDSPECIFIC] ECC control structure
* @buffers: buffer structure for read/write
* @hwcontrol: platform-specific hardware control structure
- * @ops: oob operation operands
* @erase_cmd: [INTERN] erase command write function, selectable due
* to AND support.
* @scan_bbt: [REPLACEABLE] function to scan bad block table
* @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring
* data from array to read regs (tR).
* @state: [INTERN] the current state of the NAND device
- * @oob_poi: poison value buffer
+ * @oob_poi: "poison value buffer," used for laying out OOB data
+ * before writing
* @page_shift: [INTERN] number of address bits in a page (column
* address bits).
* @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock
* @options: [BOARDSPECIFIC] various chip options. They can partly
* be set to inform nand_scan about special functionality.
* See the defines for further explanation.
+ * @bbt_options: [INTERN] bad block specific options. All options used
+ * here must come from bbm.h. By default, these options
+ * will be copied to the appropriate nand_bbt_descr's.
* @badblockpos: [INTERN] position of the bad block marker in the oob
* area.
* @badblockbits: [INTERN] number of bits to left-shift the bad block
* non 0 if ONFI supported.
* @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is
* supported, 0 otherwise.
- * @ecclayout: [REPLACEABLE] the default ecc placement scheme
+ * @ecclayout: [REPLACEABLE] the default ECC placement scheme
* @bbt: [INTERN] bad block table pointer
* @bbt_td: [REPLACEABLE] bad block table descriptor for flash
* lookup.
* @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial
* bad block scan.
* @controller: [REPLACEABLE] a pointer to a hardware controller
- * structure which is shared among multiple independend
+ * structure which is shared among multiple independent
* devices.
- * @priv: [OPTIONAL] pointer to private chip date
+ * @priv: [OPTIONAL] pointer to private chip data
* @errstat: [OPTIONAL] hardware specific function to perform
* additional error status checks (determine if errors are
* correctable).
int chip_delay;
unsigned int options;
+ unsigned int bbt_options;
int page_shift;
int phys_erase_shift;
struct nand_buffers *buffers;
struct nand_hw_control hwcontrol;
- struct mtd_oob_ops ops;
-
uint8_t *bbt;
struct nand_bbt_descr *bbt_td;
struct nand_bbt_descr *bbt_md;
* @partitions: mtd partition list
* @chip_delay: R/B delay value in us
* @options: Option flags, e.g. 16bit buswidth
- * @ecclayout: ecc layout info structure
+ * @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH
+ * @ecclayout: ECC layout info structure
* @part_probe_types: NULL-terminated array of probe types
- * @set_parts: platform specific function to set partitions
- * @priv: hardware controller specific settings
*/
struct platform_nand_chip {
int nr_chips;
struct nand_ecclayout *ecclayout;
int chip_delay;
unsigned int options;
+ unsigned int bbt_options;
const char **part_probe_types;
- void (*set_parts)(uint64_t size, struct platform_nand_chip *chip);
- void *priv;
};
/* Keep gcc happy */
#define ONENAND_IS_CACHE_PROGRAM(this) \
(this->options & ONENAND_HAS_CACHE_PROGRAM)
+#define ONENAND_IS_NOP_1(this) \
+ (this->options & ONENAND_HAS_NOP_1)
+
/* Check byte access in OneNAND */
#define ONENAND_CHECK_BYTE_ACCESS(addr) (addr & 0x1)
#define ONENAND_HAS_2PLANE (0x0004)
#define ONENAND_HAS_4KB_PAGE (0x0008)
#define ONENAND_HAS_CACHE_PROGRAM (0x0010)
+#define ONENAND_HAS_NOP_1 (0x0020)
#define ONENAND_SKIP_UNLOCK_CHECK (0x0100)
#define ONENAND_PAGEBUF_ALLOC (0x1000)
#define ONENAND_OOBBUF_ALLOC (0x2000)
* will extend to the end of the master MTD device.
* offset: absolute starting position within the master MTD device; if
* defined as MTDPART_OFS_APPEND, the partition will start where the
- * previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block.
+ * previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block;
+ * if MTDPART_OFS_RETAIN, consume as much as possible, leaving size
+ * after the end of partition.
* mask_flags: contains flags that have to be masked (removed) from the
* master MTD flag set for the corresponding MTD partition.
* For example, to force a read-only partition, simply adding
struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only) */
};
+#define MTDPART_OFS_RETAIN (-3)
#define MTDPART_OFS_NXTBLK (-2)
#define MTDPART_OFS_APPEND (-1)
#define MTDPART_SIZ_FULL (0)
struct mtd_info;
+struct device_node;
+
+/**
+ * struct mtd_part_parser_data - used to pass data to MTD partition parsers.
+ * @origin: for RedBoot, start address of MTD device
+ * @of_node: for OF parsers, device node containing partitioning information
+ */
+struct mtd_part_parser_data {
+ unsigned long origin;
+ struct device_node *of_node;
+};
+
/*
* Functions dealing with the various ways of partitioning the space
struct list_head list;
struct module *owner;
const char *name;
- int (*parse_fn)(struct mtd_info *, struct mtd_partition **, unsigned long);
+ int (*parse_fn)(struct mtd_info *, struct mtd_partition **,
+ struct mtd_part_parser_data *);
};
extern int register_mtd_parser(struct mtd_part_parser *parser);
extern int deregister_mtd_parser(struct mtd_part_parser *parser);
-extern int parse_mtd_partitions(struct mtd_info *master, const char **types,
- struct mtd_partition **pparts, unsigned long origin);
-
-#define put_partition_parser(p) do { module_put((p)->owner); } while(0)
-
-struct device;
-struct device_node;
-
-#ifdef CONFIG_MTD_OF_PARTS
-int __devinit of_mtd_parse_partitions(struct device *dev,
- struct device_node *node,
- struct mtd_partition **pparts);
-#else
-static inline int of_mtd_parse_partitions(struct device *dev,
- struct device_node *node,
- struct mtd_partition **pparts)
-{
- return 0;
-}
-#endif
-
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static inline int mtd_has_cmdlinepart(void) { return 1; }
-#else
-static inline int mtd_has_cmdlinepart(void) { return 0; }
-#endif
int mtd_is_partition(struct mtd_info *mtd);
int mtd_add_partition(struct mtd_info *master, char *name,
struct mtd_partition *parts;
};
-/*
- * Board needs to specify the exact mapping during their setup time.
- */
-void physmap_configure(unsigned long addr, unsigned long size,
- int bankwidth, void (*set_vpp)(struct map_info *, int) );
-
-/*
- * Machines that wish to do flash partition may want to call this function in
- * their setup routine.
- *
- * physmap_set_partitions(mypartitions, num_parts);
- *
- * Note that one can always override this hard-coded partition with
- * command line partition (you need to enable CONFIG_MTD_CMDLINE_PARTS).
- */
-void physmap_set_partitions(struct mtd_partition *parts, int num_parts);
-
#endif /* __LINUX_MTD_PHYSMAP__ */
__u64 usr_ptr;
};
+/**
+ * MTD operation modes
+ *
+ * @MTD_OPS_PLACE_OOB: OOB data are placed at the given offset (default)
+ * @MTD_OPS_AUTO_OOB: OOB data are automatically placed at the free areas
+ * which are defined by the internal ecclayout
+ * @MTD_OPS_RAW: data are transferred as-is, with no error correction;
+ * this mode implies %MTD_OPS_PLACE_OOB
+ *
+ * These modes can be passed to ioctl(MEMWRITE) and are also used internally.
+ * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs.
+ * %MTD_FILE_MODE_RAW.
+ */
+enum {
+ MTD_OPS_PLACE_OOB = 0,
+ MTD_OPS_AUTO_OOB = 1,
+ MTD_OPS_RAW = 2,
+};
+
+/**
+ * struct mtd_write_req - data structure for requesting a write operation
+ *
+ * @start: start address
+ * @len: length of data buffer
+ * @ooblen: length of OOB buffer
+ * @usr_data: user-provided data buffer
+ * @usr_oob: user-provided OOB buffer
+ * @mode: MTD mode (see "MTD operation modes")
+ * @padding: reserved, must be set to 0
+ *
+ * This structure supports ioctl(MEMWRITE) operations, allowing data and/or OOB
+ * writes in various modes. To write to OOB-only, set @usr_data == NULL, and to
+ * write data-only, set @usr_oob == NULL. However, setting both @usr_data and
+ * @usr_oob to NULL is not allowed.
+ */
+struct mtd_write_req {
+ __u64 start;
+ __u64 len;
+ __u64 ooblen;
+ __u64 usr_data;
+ __u64 usr_oob;
+ __u8 mode;
+ __u8 padding[7];
+};
+
#define MTD_ABSENT 0
#define MTD_RAM 1
#define MTD_ROM 2
#define MTD_NO_ERASE 0x1000 /* No erase necessary */
#define MTD_POWERUP_LOCK 0x2000 /* Always locked after reset */
-// Some common devices / combinations of capabilities
+/* Some common devices / combinations of capabilities */
#define MTD_CAP_ROM 0
#define MTD_CAP_RAM (MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE)
#define MTD_CAP_NORFLASH (MTD_WRITEABLE | MTD_BIT_WRITEABLE)
#define MTD_CAP_NANDFLASH (MTD_WRITEABLE)
-/* ECC byte placement */
+/* Obsolete ECC byte placement modes (used with obsolete MEMGETOOBSEL) */
#define MTD_NANDECC_OFF 0 // Switch off ECC (Not recommended)
#define MTD_NANDECC_PLACE 1 // Use the given placement in the structure (YAFFS1 legacy mode)
#define MTD_NANDECC_AUTOPLACE 2 // Use the default placement scheme
struct mtd_info_user {
__u8 type;
__u32 flags;
- __u32 size; // Total size of the MTD
+ __u32 size; /* Total size of the MTD */
__u32 erasesize;
__u32 writesize;
- __u32 oobsize; // Amount of OOB data per block (e.g. 16)
- /* The below two fields are obsolete and broken, do not use them
- * (TODO: remove at some point) */
- __u32 ecctype;
- __u32 eccsize;
+ __u32 oobsize; /* Amount of OOB data per block (e.g. 16) */
+ __u64 padding; /* Old obsolete field; do not use */
};
struct region_info_user {
__u32 offset; /* At which this region starts,
- * from the beginning of the MTD */
- __u32 erasesize; /* For this region */
- __u32 numblocks; /* Number of blocks in this region */
+ * from the beginning of the MTD */
+ __u32 erasesize; /* For this region */
+ __u32 numblocks; /* Number of blocks in this region */
__u32 regionindex;
};
__u32 locked;
};
+/*
+ * Note, the following ioctl existed in the past and was removed:
+ * #define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo)
+ * Try to avoid adding a new ioctl with the same ioctl number.
+ */
+
+/* Get basic MTD characteristics info (better to use sysfs) */
#define MEMGETINFO _IOR('M', 1, struct mtd_info_user)
+/* Erase segment of MTD */
#define MEMERASE _IOW('M', 2, struct erase_info_user)
+/* Write out-of-band data from MTD */
#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf)
+/* Read out-of-band data from MTD */
#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf)
+/* Lock a chip (for MTD that supports it) */
#define MEMLOCK _IOW('M', 5, struct erase_info_user)
+/* Unlock a chip (for MTD that supports it) */
#define MEMUNLOCK _IOW('M', 6, struct erase_info_user)
+/* Get the number of different erase regions */
#define MEMGETREGIONCOUNT _IOR('M', 7, int)
+/* Get information about the erase region for a specific index */
#define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user)
-#define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo)
+/* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */
#define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo)
+/* Check if an eraseblock is bad */
#define MEMGETBADBLOCK _IOW('M', 11, __kernel_loff_t)
+/* Mark an eraseblock as bad */
#define MEMSETBADBLOCK _IOW('M', 12, __kernel_loff_t)
+/* Set OTP (One-Time Programmable) mode (factory vs. user) */
#define OTPSELECT _IOR('M', 13, int)
+/* Get number of OTP (One-Time Programmable) regions */
#define OTPGETREGIONCOUNT _IOW('M', 14, int)
+/* Get all OTP (One-Time Programmable) info about MTD */
#define OTPGETREGIONINFO _IOW('M', 15, struct otp_info)
+/* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */
#define OTPLOCK _IOR('M', 16, struct otp_info)
+/* Get ECC layout (deprecated) */
#define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout_user)
+/* Get statistics about corrected/uncorrected errors */
#define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats)
+/* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */
#define MTDFILEMODE _IO('M', 19)
+/* Erase segment of MTD (supports 64-bit address) */
#define MEMERASE64 _IOW('M', 20, struct erase_info_user64)
+/* Write data to OOB (64-bit version) */
#define MEMWRITEOOB64 _IOWR('M', 21, struct mtd_oob_buf64)
+/* Read data from OOB (64-bit version) */
#define MEMREADOOB64 _IOWR('M', 22, struct mtd_oob_buf64)
+/* Check if chip is locked (for MTD that supports it) */
#define MEMISLOCKED _IOR('M', 23, struct erase_info_user)
+/*
+ * Most generic write interface; can write in-band and/or out-of-band in various
+ * modes (see "struct mtd_write_req")
+ */
+#define MEMWRITE _IOWR('M', 24, struct mtd_write_req)
/*
* Obsolete legacy interface. Keep it in order not to break userspace
};
/*
- * Read/write file modes for access to MTD
+ * MTD file modes - for read/write access to MTD
+ *
+ * @MTD_FILE_MODE_NORMAL: OTP disabled, ECC enabled
+ * @MTD_FILE_MODE_OTP_FACTORY: OTP enabled in factory mode
+ * @MTD_FILE_MODE_OTP_USER: OTP enabled in user mode
+ * @MTD_FILE_MODE_RAW: OTP disabled, ECC disabled
+ *
+ * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained
+ * separately for each open file descriptor.
+ *
+ * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW -
+ * raw access to the flash, without error correction or autoplacement schemes.
+ * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode
+ * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is
+ * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)).
*/
enum mtd_file_modes {
- MTD_MODE_NORMAL = MTD_OTP_OFF,
- MTD_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
- MTD_MODE_OTP_USER = MTD_OTP_USER,
- MTD_MODE_RAW,
+ MTD_FILE_MODE_NORMAL = MTD_OTP_OFF,
+ MTD_FILE_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
+ MTD_FILE_MODE_OTP_USER = MTD_OTP_USER,
+ MTD_FILE_MODE_RAW,
};
#endif /* __MTD_ABI_H__ */
git.openpandora.org / pandora-kernel.git / commitdiff