usb: otg: enable regulator only on cable/device connect

Remove the regulator enable while driver loading and enable it only when
the cable/device is connected and disable it when disconnected.

Remove the configuration of config_state and config_trans register
configuration as these registers are programmed when regulator
enable/disable is called.

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index 28f7701..eca4591 100644 (file)
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -158,8 +158,6 @@ static int twl6030_phy_init(struct otg_transceiver *x)
        dev  = twl->dev;
        pdata = dev->platform_data;
 
-       regulator_enable(twl->usb3v3);
-
        hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
 
        if (hw_state & STS_USB_ID)
@@ -180,7 +178,6 @@ static void twl6030_phy_shutdown(struct otg_transceiver *x)
        dev  = twl->dev;
        pdata = dev->platform_data;
        pdata->phy_power(twl->dev, 0, 0);
-       regulator_disable(twl->usb3v3);
 }
 
 static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
@@ -199,16 +196,6 @@ static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
        if (IS_ERR(twl->usb3v3))
                return -ENODEV;
 
-       regulator_enable(twl->usb3v3);
-
-       /* Program the VUSB_CFG_TRANS for ACTIVE state. */
-       twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0x3F,
-                                               VUSB_CFG_TRANS);
-
-       /* Program the VUSB_CFG_STATE register to ON on all groups. */
-       twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0xE1,
-                                               VUSB_CFG_STATE);
-
        /* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
        twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);
 
@@ -261,16 +248,23 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
                                                CONTROLLER_STAT1);
        if (!(hw_state & STS_USB_ID)) {
                if (vbus_state & VBUS_DET) {
+                       regulator_enable(twl->usb3v3);
+                       twl->asleep = 1;
                        status = USB_EVENT_VBUS;
                        twl->otg.default_a = false;
                        twl->otg.state = OTG_STATE_B_IDLE;
+                       twl->linkstat = status;
+                       blocking_notifier_call_chain(&twl->otg.notifier,
+                                               status, twl->otg.gadget);
                } else {
                        status = USB_EVENT_NONE;
-               }
-               if (status >= 0) {
                        twl->linkstat = status;
                        blocking_notifier_call_chain(&twl->otg.notifier,
                                                status, twl->otg.gadget);
+                       if (twl->asleep) {
+                               regulator_disable(twl->usb3v3);
+                               twl->asleep = 0;
+                       }
                }
        }
        sysfs_notify(&twl->dev->kobj, NULL, "vbus");
@@ -288,6 +282,8 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 
        if (hw_state & STS_USB_ID) {
 
+               regulator_enable(twl->usb3v3);
+               twl->asleep = 1;
                twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1);
                twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
                                                                0x10);
@@ -437,6 +433,7 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
                return status;
        }
 
+       twl->asleep = 0;
        pdata->phy_init(dev);
        twl6030_enable_irq(&twl->otg);
        dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");