sfc: Remove broken automatic fallback for invalid Falcon chip/board config

If the Falcon board config is invalid, we cannot proceed - we do not
have a valid board type to pass to falcon_probe_board(), and if we
kluge that to work with an unknown board then other initialisation
code will crash.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index 267019b..b2c3381 100644 (file)
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -1235,7 +1235,6 @@ static void falcon_remove_spi_devices(struct efx_nic *efx)
 static int falcon_probe_nvconfig(struct efx_nic *efx)
 {
        struct falcon_nvconfig *nvconfig;
-       int board_rev;
        int rc;
 
        nvconfig = kmalloc(sizeof(*nvconfig), GFP_KERNEL);
@@ -1243,37 +1242,25 @@ static int falcon_probe_nvconfig(struct efx_nic *efx)
                return -ENOMEM;
 
        rc = falcon_read_nvram(efx, nvconfig);
-       if (rc == -EINVAL) {
-               netif_err(efx, probe, efx->net_dev,
-                         "NVRAM is invalid therefore using defaults\n");
-               efx->phy_type = PHY_TYPE_NONE;
-               efx->mdio.prtad = MDIO_PRTAD_NONE;
-               board_rev = 0;
-               rc = 0;
-       } else if (rc) {
+       if (rc)
                goto fail1;
-       } else {
-               struct falcon_nvconfig_board_v2 *v2 = &nvconfig->board_v2;
-               struct falcon_nvconfig_board_v3 *v3 = &nvconfig->board_v3;
-
-               efx->phy_type = v2->port0_phy_type;
-               efx->mdio.prtad = v2->port0_phy_addr;
-               board_rev = le16_to_cpu(v2->board_revision);
-
-               if (le16_to_cpu(nvconfig->board_struct_ver) >= 3) {
-                       rc = falcon_spi_device_init(
-                               efx, &efx->spi_flash, FFE_AB_SPI_DEVICE_FLASH,
-                               le32_to_cpu(v3->spi_device_type
-                                           [FFE_AB_SPI_DEVICE_FLASH]));
-                       if (rc)
-                               goto fail2;
-                       rc = falcon_spi_device_init(
-                               efx, &efx->spi_eeprom, FFE_AB_SPI_DEVICE_EEPROM,
-                               le32_to_cpu(v3->spi_device_type
-                                           [FFE_AB_SPI_DEVICE_EEPROM]));
-                       if (rc)
-                               goto fail2;
-               }
+
+       efx->phy_type = nvconfig->board_v2.port0_phy_type;
+       efx->mdio.prtad = nvconfig->board_v2.port0_phy_addr;
+
+       if (le16_to_cpu(nvconfig->board_struct_ver) >= 3) {
+               rc = falcon_spi_device_init(
+                       efx, &efx->spi_flash, FFE_AB_SPI_DEVICE_FLASH,
+                       le32_to_cpu(nvconfig->board_v3
+                                   .spi_device_type[FFE_AB_SPI_DEVICE_FLASH]));
+               if (rc)
+                       goto fail2;
+               rc = falcon_spi_device_init(
+                       efx, &efx->spi_eeprom, FFE_AB_SPI_DEVICE_EEPROM,
+                       le32_to_cpu(nvconfig->board_v3
+                                   .spi_device_type[FFE_AB_SPI_DEVICE_EEPROM]));
+               if (rc)
+                       goto fail2;
        }
 
        /* Read the MAC addresses */
@@ -1282,7 +1269,8 @@ static int falcon_probe_nvconfig(struct efx_nic *efx)
        netif_dbg(efx, probe, efx->net_dev, "PHY is %d phy_id %d\n",
                  efx->phy_type, efx->mdio.prtad);
 
-       rc = falcon_probe_board(efx, board_rev);
+       rc = falcon_probe_board(efx,
+                               le16_to_cpu(nvconfig->board_v2.board_revision));
        if (rc)
                goto fail2;
 
@@ -1419,8 +1407,11 @@ static int falcon_probe_nic(struct efx_nic *efx)
 
        /* Read in the non-volatile configuration */
        rc = falcon_probe_nvconfig(efx);
-       if (rc)
+       if (rc) {
+               if (rc == -EINVAL)
+                       netif_err(efx, probe, efx->net_dev, "NVRAM is invalid\n");
                goto fail5;
+       }
 
        /* Initialise I2C adapter */
        board = falcon_board(efx);