/*
- * File: m548xgpt.h
- * Purpose: Register and bit definitions for the MCF548X
+ * File: m54xxgpt.h
+ * Purpose: Register and bit definitions for the MCF54XX
*
* Notes:
*
*/
- #ifndef m548xgpt_h
- #define m548xgpt_h
+ #ifndef m54xxgpt_h
+ #define m54xxgpt_h
/*********************************************************************
*
#define MCF_GPT_GMS_GPIO_INPUT (0x00000000)
#define MCF_GPT_GMS_GPIO_OUTLO (0x00000020)
#define MCF_GPT_GMS_GPIO_OUTHI (0x00000030)
+#define MCF_GPT_GMS_GPIO_MASK (0x00000030)
#define MCF_GPT_GMS_TMS_DISABLE (0x00000000)
#define MCF_GPT_GMS_TMS_INCAPT (0x00000001)
#define MCF_GPT_GMS_TMS_OUTCAPT (0x00000002)
#define MCF_GPT_GMS_TMS_PWM (0x00000003)
#define MCF_GPT_GMS_TMS_GPIO (0x00000004)
+#define MCF_GPT_GMS_TMS_MASK (0x00000007)
/* Bit definitions and macros for MCF_GPT_GCIR */
#define MCF_GPT_GCIR_CNT(x) (((x)&0x0000FFFF)<<0)
/********************************************************************/
- #endif /* m548xgpt_h */
+ #endif /* m54xxgpt_h */
#include <asm/asm-offsets.h>
#include <asm/entry.h>
+ #ifdef CONFIG_COLDFIRE_SW_A7
+ /*
+ * Define software copies of the supervisor and user stack pointers.
+ */
.bss
-
sw_ksp:
.long 0
-
sw_usp:
.long 0
+ #endif /* CONFIG_COLDFIRE_SW_A7 */
.text
.globl ret_from_exception
.globl ret_from_signal
.globl sys_call_table
- .globl ret_from_interrupt
.globl inthandler
.globl fasthandler
jne Lwork_to_do /* still work to do */
Lreturn:
- move #0x2700,%sr /* disable intrs */
- movel sw_usp,%a0 /* get usp */
- movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */
- movel %sp@(PT_OFF_FORMATVEC),%a0@- /* copy exception format/vector/sr */
- moveml %sp@,%d1-%d5/%a0-%a2
- lea %sp@(32),%sp /* space for 8 regs */
- movel %sp@+,%d0
- addql #4,%sp /* orig d0 */
- addl %sp@+,%sp /* stk adj */
- addql #8,%sp /* remove exception */
- movel %sp,sw_ksp /* save ksp */
- subql #8,sw_usp /* set exception */
- movel sw_usp,%sp /* restore usp */
- rte
+ RESTORE_USER
Lwork_to_do:
movel %a0@(TI_FLAGS),%d1 /* get thread_info->flags */
subql #4,%sp /* dummy return address */
SAVE_SWITCH_STACK
pea %sp@(SWITCH_STACK_SIZE)
- clrl %sp@-
jsr do_signal
- addql #8,%sp
+ addql #4,%sp
RESTORE_SWITCH_STACK
addql #4,%sp
- jmp Lreturn
+ jmp Luser_return
/*
* This is the generic interrupt handler (for all hardware interrupt
jbsr do_IRQ /* call high level irq handler */
lea %sp@(8),%sp /* pop args off stack */
- bra ret_from_interrupt /* this was fallthrough */
-
- /*
- * This is the fast interrupt handler (for certain hardware interrupt
- * sources). Unlike the normal interrupt handler it just uses the
- * current stack (doesn't care if it is user or kernel). It also
- * doesn't bother doing the bottom half handlers.
- */
- ENTRY(fasthandler)
- SAVE_LOCAL
-
- movew %sp@(PT_OFF_FORMATVEC),%d0
- andl #0x03fc,%d0 /* mask out vector only */
-
- movel %sp,%sp@- /* push regs arg */
- lsrl #2,%d0 /* calculate real vector # */
- movel %d0,%sp@- /* push vector number */
- jbsr do_IRQ /* call high level irq handler */
- lea %sp@(8),%sp /* pop args off stack */
-
- RESTORE_LOCAL
-
- ENTRY(ret_from_interrupt)
- /* the fasthandler is confusing me, haven't seen any user */
- jmp ret_from_exception
+ bra ret_from_exception
/*
* Beware - when entering resume, prev (the current task) is
*/
ENTRY(resume)
movel %a0, %d1 /* get prev thread in d1 */
-
- movel sw_usp,%d0 /* save usp */
- movel %d0,%a0@(TASK_THREAD+THREAD_USP)
+ RDUSP
+ movel %a2,%a0@(TASK_THREAD+THREAD_USP)
SAVE_SWITCH_STACK
movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack pointer */
RESTORE_SWITCH_STACK
movel %a1@(TASK_THREAD+THREAD_USP),%a0 /* restore thread user stack */
- movel %a0, sw_usp
+ WRUSP
rts